Thu Jan 2 11:08:33 UTC 2025 I: starting to build edac-utils/unstable/i386 on jenkins on '2025-01-02 11:08' Thu Jan 2 11:08:33 UTC 2025 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/i386_5/45666/console.log Thu Jan 2 11:08:33 UTC 2025 I: Downloading source for unstable/edac-utils=0.18+git16-g8fdc1d4-1 --2025-01-02 11:08:34-- http://deb.debian.org/debian/pool/main/e/edac-utils/edac-utils_0.18%2bgit16-g8fdc1d4-1.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2191 (2.1K) [text/prs.lines.tag] Saving to: ‘edac-utils_0.18+git16-g8fdc1d4-1.dsc’ 0K .. 100% 326M=0s 2025-01-02 11:08:34 (326 MB/s) - ‘edac-utils_0.18+git16-g8fdc1d4-1.dsc’ saved [2191/2191] Thu Jan 2 11:08:34 UTC 2025 I: edac-utils_0.18+git16-g8fdc1d4-1.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Format: 3.0 (quilt) Source: edac-utils Binary: edac-utils, libedac-dev, libedac1, libedac1-dbg Architecture: any Version: 0.18+git16-g8fdc1d4-1 Maintainer: Yaroslav Halchenko Uploaders: Tim Small Homepage: https://github.com/grondo/edac-utils Standards-Version: 3.9.3 Vcs-Browser: http://git.oneukrainian.com/?p=deb/edac-utils.git Vcs-Git: http://git.oneukrainian.com/pub/deb/edac-utils.git Build-Depends: cdbs, debhelper (>= 10), libsysfs-dev, chrpath Package-List: edac-utils deb admin optional arch=any libedac-dev deb libdevel optional arch=any libedac1 deb libs optional arch=any libedac1-dbg deb debug optional arch=any Checksums-Sha1: 6339855e55e57c8ccbeb4306724067aff5efa22e 284285 edac-utils_0.18+git16-g8fdc1d4.orig.tar.gz efaad554b4ce9a1ff1692fa2dfc7a0bf14a541a2 6760 edac-utils_0.18+git16-g8fdc1d4-1.debian.tar.xz Checksums-Sha256: 267d032e6bfb30cf44f62e25e4f2b1e098ff40ba2731206191f35c9c74263586 284285 edac-utils_0.18+git16-g8fdc1d4.orig.tar.gz a0d91d5a35a9bb16edabdf86f20aedd882b99af425426866c718644476347759 6760 edac-utils_0.18+git16-g8fdc1d4-1.debian.tar.xz Files: 546fd5ab2ec3eff418521f52c4166c73 284285 edac-utils_0.18+git16-g8fdc1d4.orig.tar.gz 2d5f1c0fe78a1c23d59a1f64775ab99f 6760 edac-utils_0.18+git16-g8fdc1d4-1.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQIzBAEBCAAdFiEExbkF8OjZ/ZZo/zZvot4jUGLaM/oFAmd1fnEACgkQot4jUGLa M/qW3xAAidBdmCVHljl//oBn3c+fE/NckUHLo2G81RFYi0ilJHkaB7Vr6B3eqzUD uOln4DceVeD/4/ANYkhdVsl9WI0pEDNQfAWsnOzPH7SmzCpqzXAEqCfBHuwH2wXW 2Gmx/l/CXQSjVr6Z/Z20ZcN8F/+F0jUtMTSfLN8GHpj0Ikj2pHsDqoaOUiARhkFG OFXGUbH8FUI4QYxGRl7sKdctcJYnLdea1YtWex/d8Mweb84Qb5pbdoDbebxnAYpW IqKDwmxb256uevLLCMDjwXQm6aESEk6bw7Hgc5TEYl8GIAp0NXNkRuxTeX6vUaSs 8Pneuoa7m1O9Ev7jGi3A33JqUBzRKQLL8zGi0yyldEU5lGbkyrStsZUarM/vxLnl 1ec0YYuL817Q3YJdJ8zjr+0toysNlB0GvBitSYZqb5nxjdOAn21Yzc1Zb6pHfzsn vTddnMSh9yIa6Hdl8+XNbRv4U57e+TTvbs1Np90x2+Sg3dtlyNpY9/8l2IJz50Io ga6tCXfEtcAPKUl5em7o4sd0WCJTbdZ6zLb4hEX6eL2WdfnV9U1U4nln5WF22hgq KGTzEbkaFD9DHOtY/WrsW4F+X0Hj0SZgyijHkYZuhwfiSkpVKc4LWwxVtlO7z6vP q5TaO3PxYjS0W4vTQVPQswXkiDp31voHYPMkYaAODlY4vR8AGWY= =byt/ -----END PGP SIGNATURE----- Thu Jan 2 11:08:34 UTC 2025 I: Checking whether the package is not for us Thu Jan 2 11:08:34 UTC 2025 I: Starting 1st build on remote node ionos12-i386.debian.net. Thu Jan 2 11:08:34 UTC 2025 I: Preparing to do remote build '1' on ionos12-i386.debian.net. Thu Jan 2 11:09:52 UTC 2025 I: Deleting $TMPDIR on ionos12-i386.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Wed Jan 1 23:08:35 -12 2025 I: pbuilder-time-stamp: 1735816115 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/unstable-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: using eatmydata during job I: Copying source file I: copying [edac-utils_0.18+git16-g8fdc1d4-1.dsc] I: copying [./edac-utils_0.18+git16-g8fdc1d4.orig.tar.gz] I: copying [./edac-utils_0.18+git16-g8fdc1d4-1.debian.tar.xz] I: Extracting source dpkg-source: warning: cannot verify inline signature for ./edac-utils_0.18+git16-g8fdc1d4-1.dsc: unsupported subcommand dpkg-source: info: extracting edac-utils in edac-utils-0.18+git16-g8fdc1d4 dpkg-source: info: unpacking edac-utils_0.18+git16-g8fdc1d4.orig.tar.gz dpkg-source: info: unpacking edac-utils_0.18+git16-g8fdc1d4-1.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying deb_bogus_changelog dpkg-source: info: applying deb_init_script dpkg-source: info: applying 1000-appstream-metainfo.patch I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/57918/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='i386' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=11 ' DISTRIBUTION='unstable' HOME='/root' HOST_ARCH='i386' IFS=' ' INVOCATION_ID='6f943ef3665d4e5fbfad43868d7672f5' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' LD_LIBRARY_PATH='/usr/lib/libeatmydata' LD_PRELOAD='libeatmydata.so' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='57918' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.tuzS6EeG/pbuilderrc_eo0Q --distribution unstable --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/unstable-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.tuzS6EeG/b1 --logfile b1/build.log edac-utils_0.18+git16-g8fdc1d4-1.dsc' SUDO_GID='112' SUDO_UID='107' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://46.16.76.132:3128' I: uname -a Linux ionos12-i386 6.1.0-28-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.119-1 (2024-11-22) x86_64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Nov 22 14:40 /bin -> usr/bin I: user script /srv/workspace/pbuilder/57918/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: i386 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: cdbs, debhelper (>= 10), libsysfs-dev, chrpath dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19840 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on cdbs; however: Package cdbs is not installed. pbuilder-satisfydepends-dummy depends on debhelper (>= 10); however: Package debhelper is not installed. pbuilder-satisfydepends-dummy depends on libsysfs-dev; however: Package libsysfs-dev is not installed. pbuilder-satisfydepends-dummy depends on chrpath; however: Package chrpath is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} cdbs{a} chrpath{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libcom-err2{a} libdebhelper-perl{a} libelf1t64{a} libexpat1{a} libffi8{a} libfile-stripnondeterminism-perl{a} libgssapi-krb5-2{a} libicu72{a} libk5crypto3{a} libkeyutils1{a} libkrb5-3{a} libkrb5support0{a} libmagic-mgc{a} libmagic1t64{a} libnsl2{a} libpipeline1{a} libpython3-stdlib{a} libpython3.12-minimal{a} libpython3.12-stdlib{a} libreadline8t64{a} libsysfs-dev{a} libsysfs2{a} libtirpc-common{a} libtirpc3t64{a} libtool{a} libuchardet0{a} libunistring5{a} libxml2{a} m4{a} man-db{a} media-types{a} netbase{a} po-debconf{a} python3{a} python3-minimal{a} python3-scour{a} python3.12{a} python3.12-minimal{a} readline-common{a} scour{a} sensible-utils{a} tzdata{a} The following packages are RECOMMENDED but will NOT be installed: ca-certificates curl krb5-locales libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 59 newly installed, 0 to remove and 0 not upgraded. Need to get 28.0 MB of archives. After unpacking 107 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian unstable/main i386 libpython3.12-minimal i386 3.12.8-3 [816 kB] Get: 2 http://deb.debian.org/debian unstable/main i386 libexpat1 i386 2.6.4-1 [107 kB] Get: 3 http://deb.debian.org/debian unstable/main i386 python3.12-minimal i386 3.12.8-3 [2239 kB] Get: 4 http://deb.debian.org/debian unstable/main i386 python3-minimal i386 3.12.8-1 [26.9 kB] Get: 5 http://deb.debian.org/debian unstable/main i386 media-types all 10.1.0 [26.9 kB] Get: 6 http://deb.debian.org/debian unstable/main i386 netbase all 6.4 [12.8 kB] Get: 7 http://deb.debian.org/debian unstable/main i386 tzdata all 2024b-4 [256 kB] Get: 8 http://deb.debian.org/debian unstable/main i386 libffi8 i386 3.4.6-1 [21.2 kB] Get: 9 http://deb.debian.org/debian unstable/main i386 libkrb5support0 i386 1.21.3-3 [34.9 kB] Get: 10 http://deb.debian.org/debian unstable/main i386 libcom-err2 i386 1.47.2-1 [24.3 kB] Get: 11 http://deb.debian.org/debian unstable/main i386 libk5crypto3 i386 1.21.3-3 [83.6 kB] Get: 12 http://deb.debian.org/debian unstable/main i386 libkeyutils1 i386 1.6.3-4 [9600 B] Get: 13 http://deb.debian.org/debian unstable/main i386 libkrb5-3 i386 1.21.3-3 [350 kB] Get: 14 http://deb.debian.org/debian unstable/main i386 libgssapi-krb5-2 i386 1.21.3-3 [146 kB] Get: 15 http://deb.debian.org/debian unstable/main i386 libtirpc-common all 1.3.4+ds-1.3 [10.9 kB] Get: 16 http://deb.debian.org/debian unstable/main i386 libtirpc3t64 i386 1.3.4+ds-1.3+b1 [90.5 kB] Get: 17 http://deb.debian.org/debian unstable/main i386 libnsl2 i386 1.3.0-3+b3 [42.7 kB] Get: 18 http://deb.debian.org/debian unstable/main i386 readline-common all 8.2-6 [69.4 kB] Get: 19 http://deb.debian.org/debian unstable/main i386 libreadline8t64 i386 8.2-6 [173 kB] Get: 20 http://deb.debian.org/debian unstable/main i386 libpython3.12-stdlib i386 3.12.8-3 [1968 kB] Get: 21 http://deb.debian.org/debian unstable/main i386 python3.12 i386 3.12.8-3 [677 kB] Get: 22 http://deb.debian.org/debian unstable/main i386 libpython3-stdlib i386 3.12.8-1 [9792 B] Get: 23 http://deb.debian.org/debian unstable/main i386 python3 i386 3.12.8-1 [27.9 kB] Get: 24 http://deb.debian.org/debian unstable/main i386 sensible-utils all 0.0.24 [24.8 kB] Get: 25 http://deb.debian.org/debian unstable/main i386 libmagic-mgc i386 1:5.45-3+b1 [314 kB] Get: 26 http://deb.debian.org/debian unstable/main i386 libmagic1t64 i386 1:5.45-3+b1 [115 kB] Get: 27 http://deb.debian.org/debian unstable/main i386 file i386 1:5.45-3+b1 [43.2 kB] Get: 28 http://deb.debian.org/debian unstable/main i386 gettext-base i386 0.22.5-3 [201 kB] Get: 29 http://deb.debian.org/debian unstable/main i386 libuchardet0 i386 0.0.8-1+b2 [69.2 kB] Get: 30 http://deb.debian.org/debian unstable/main i386 groff-base i386 1.23.0-7 [1199 kB] Get: 31 http://deb.debian.org/debian unstable/main i386 bsdextrautils i386 2.40.2-13 [95.9 kB] Get: 32 http://deb.debian.org/debian unstable/main i386 libpipeline1 i386 1.5.8-1 [41.2 kB] Get: 33 http://deb.debian.org/debian unstable/main i386 man-db i386 2.13.0-1 [1428 kB] Get: 34 http://deb.debian.org/debian unstable/main i386 m4 i386 1.4.19-4 [293 kB] Get: 35 http://deb.debian.org/debian unstable/main i386 autoconf all 2.72-3 [493 kB] Get: 36 http://deb.debian.org/debian unstable/main i386 autotools-dev all 20220109.1 [51.6 kB] Get: 37 http://deb.debian.org/debian unstable/main i386 automake all 1:1.16.5-1.3 [823 kB] Get: 38 http://deb.debian.org/debian unstable/main i386 autopoint all 0.22.5-3 [723 kB] Get: 39 http://deb.debian.org/debian unstable/main i386 python3-scour all 0.38.2-5 [55.7 kB] Get: 40 http://deb.debian.org/debian unstable/main i386 scour all 0.38.2-5 [16.3 kB] Get: 41 http://deb.debian.org/debian unstable/main i386 cdbs all 0.4.167 [43.3 kB] Get: 42 http://deb.debian.org/debian unstable/main i386 chrpath i386 0.18-1 [14.0 kB] Get: 43 http://deb.debian.org/debian unstable/main i386 libdebhelper-perl all 13.23 [90.6 kB] Get: 44 http://deb.debian.org/debian unstable/main i386 libtool all 2.4.7-8 [517 kB] Get: 45 http://deb.debian.org/debian unstable/main i386 dh-autoreconf all 20 [17.1 kB] Get: 46 http://deb.debian.org/debian unstable/main i386 libarchive-zip-perl all 1.68-1 [104 kB] Get: 47 http://deb.debian.org/debian unstable/main i386 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get: 48 http://deb.debian.org/debian unstable/main i386 dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get: 49 http://deb.debian.org/debian unstable/main i386 libelf1t64 i386 0.192-4 [195 kB] Get: 50 http://deb.debian.org/debian unstable/main i386 dwz i386 0.15-1+b1 [116 kB] Get: 51 http://deb.debian.org/debian unstable/main i386 libunistring5 i386 1.3-1 [458 kB] Get: 52 http://deb.debian.org/debian unstable/main i386 libicu72 i386 72.1-5+b1 [9583 kB] Get: 53 http://deb.debian.org/debian unstable/main i386 libxml2 i386 2.12.7+dfsg+really2.9.14-0.2+b1 [734 kB] Get: 54 http://deb.debian.org/debian unstable/main i386 gettext i386 0.22.5-3 [1631 kB] Get: 55 http://deb.debian.org/debian unstable/main i386 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 56 http://deb.debian.org/debian unstable/main i386 po-debconf all 1.0.21+nmu1 [248 kB] Get: 57 http://deb.debian.org/debian unstable/main i386 debhelper all 13.23 [919 kB] Get: 58 http://deb.debian.org/debian unstable/main i386 libsysfs2 i386 2.1.1-6+b1 [24.8 kB] Get: 59 http://deb.debian.org/debian unstable/main i386 libsysfs-dev i386 2.1.1-6+b1 [41.3 kB] Fetched 28.0 MB in 0s (82.5 MB/s) Preconfiguring packages ... Selecting previously unselected package libpython3.12-minimal:i386. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19840 files and directories currently installed.) Preparing to unpack .../libpython3.12-minimal_3.12.8-3_i386.deb ... Unpacking libpython3.12-minimal:i386 (3.12.8-3) ... Selecting previously unselected package libexpat1:i386. Preparing to unpack .../libexpat1_2.6.4-1_i386.deb ... Unpacking libexpat1:i386 (2.6.4-1) ... Selecting previously unselected package python3.12-minimal. Preparing to unpack .../python3.12-minimal_3.12.8-3_i386.deb ... Unpacking python3.12-minimal (3.12.8-3) ... Setting up libpython3.12-minimal:i386 (3.12.8-3) ... Setting up libexpat1:i386 (2.6.4-1) ... Setting up python3.12-minimal (3.12.8-3) ... Selecting previously unselected package python3-minimal. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20160 files and directories currently installed.) Preparing to unpack .../00-python3-minimal_3.12.8-1_i386.deb ... Unpacking python3-minimal (3.12.8-1) ... Selecting previously unselected package media-types. Preparing to unpack .../01-media-types_10.1.0_all.deb ... Unpacking media-types (10.1.0) ... Selecting previously unselected package netbase. Preparing to unpack .../02-netbase_6.4_all.deb ... Unpacking netbase (6.4) ... Selecting previously unselected package tzdata. Preparing to unpack .../03-tzdata_2024b-4_all.deb ... Unpacking tzdata (2024b-4) ... Selecting previously unselected package libffi8:i386. Preparing to unpack .../04-libffi8_3.4.6-1_i386.deb ... Unpacking libffi8:i386 (3.4.6-1) ... Selecting previously unselected package libkrb5support0:i386. Preparing to unpack .../05-libkrb5support0_1.21.3-3_i386.deb ... Unpacking libkrb5support0:i386 (1.21.3-3) ... Selecting previously unselected package libcom-err2:i386. Preparing to unpack .../06-libcom-err2_1.47.2-1_i386.deb ... Unpacking libcom-err2:i386 (1.47.2-1) ... Selecting previously unselected package libk5crypto3:i386. Preparing to unpack .../07-libk5crypto3_1.21.3-3_i386.deb ... Unpacking libk5crypto3:i386 (1.21.3-3) ... Selecting previously unselected package libkeyutils1:i386. Preparing to unpack .../08-libkeyutils1_1.6.3-4_i386.deb ... Unpacking libkeyutils1:i386 (1.6.3-4) ... Selecting previously unselected package libkrb5-3:i386. Preparing to unpack .../09-libkrb5-3_1.21.3-3_i386.deb ... Unpacking libkrb5-3:i386 (1.21.3-3) ... Selecting previously unselected package libgssapi-krb5-2:i386. Preparing to unpack .../10-libgssapi-krb5-2_1.21.3-3_i386.deb ... Unpacking libgssapi-krb5-2:i386 (1.21.3-3) ... Selecting previously unselected package libtirpc-common. Preparing to unpack .../11-libtirpc-common_1.3.4+ds-1.3_all.deb ... Unpacking libtirpc-common (1.3.4+ds-1.3) ... Selecting previously unselected package libtirpc3t64:i386. Preparing to unpack .../12-libtirpc3t64_1.3.4+ds-1.3+b1_i386.deb ... Adding 'diversion of /lib/i386-linux-gnu/libtirpc.so.3 to /lib/i386-linux-gnu/libtirpc.so.3.usr-is-merged by libtirpc3t64' Adding 'diversion of /lib/i386-linux-gnu/libtirpc.so.3.0.0 to /lib/i386-linux-gnu/libtirpc.so.3.0.0.usr-is-merged by libtirpc3t64' Unpacking libtirpc3t64:i386 (1.3.4+ds-1.3+b1) ... Selecting previously unselected package libnsl2:i386. Preparing to unpack .../13-libnsl2_1.3.0-3+b3_i386.deb ... Unpacking libnsl2:i386 (1.3.0-3+b3) ... Selecting previously unselected package readline-common. Preparing to unpack .../14-readline-common_8.2-6_all.deb ... Unpacking readline-common (8.2-6) ... Selecting previously unselected package libreadline8t64:i386. Preparing to unpack .../15-libreadline8t64_8.2-6_i386.deb ... Adding 'diversion of /lib/i386-linux-gnu/libhistory.so.8 to /lib/i386-linux-gnu/libhistory.so.8.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/i386-linux-gnu/libhistory.so.8.2 to /lib/i386-linux-gnu/libhistory.so.8.2.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/i386-linux-gnu/libreadline.so.8 to /lib/i386-linux-gnu/libreadline.so.8.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/i386-linux-gnu/libreadline.so.8.2 to /lib/i386-linux-gnu/libreadline.so.8.2.usr-is-merged by libreadline8t64' Unpacking libreadline8t64:i386 (8.2-6) ... Selecting previously unselected package libpython3.12-stdlib:i386. Preparing to unpack .../16-libpython3.12-stdlib_3.12.8-3_i386.deb ... Unpacking libpython3.12-stdlib:i386 (3.12.8-3) ... Selecting previously unselected package python3.12. Preparing to unpack .../17-python3.12_3.12.8-3_i386.deb ... Unpacking python3.12 (3.12.8-3) ... Selecting previously unselected package libpython3-stdlib:i386. Preparing to unpack .../18-libpython3-stdlib_3.12.8-1_i386.deb ... Unpacking libpython3-stdlib:i386 (3.12.8-1) ... Setting up python3-minimal (3.12.8-1) ... Selecting previously unselected package python3. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 21228 files and directories currently installed.) Preparing to unpack .../00-python3_3.12.8-1_i386.deb ... Unpacking python3 (3.12.8-1) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../01-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../02-libmagic-mgc_1%3a5.45-3+b1_i386.deb ... Unpacking libmagic-mgc (1:5.45-3+b1) ... Selecting previously unselected package libmagic1t64:i386. Preparing to unpack .../03-libmagic1t64_1%3a5.45-3+b1_i386.deb ... Unpacking libmagic1t64:i386 (1:5.45-3+b1) ... Selecting previously unselected package file. Preparing to unpack .../04-file_1%3a5.45-3+b1_i386.deb ... Unpacking file (1:5.45-3+b1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../05-gettext-base_0.22.5-3_i386.deb ... Unpacking gettext-base (0.22.5-3) ... Selecting previously unselected package libuchardet0:i386. Preparing to unpack .../06-libuchardet0_0.0.8-1+b2_i386.deb ... Unpacking libuchardet0:i386 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../07-groff-base_1.23.0-7_i386.deb ... Unpacking groff-base (1.23.0-7) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../08-bsdextrautils_2.40.2-13_i386.deb ... Unpacking bsdextrautils (2.40.2-13) ... Selecting previously unselected package libpipeline1:i386. Preparing to unpack .../09-libpipeline1_1.5.8-1_i386.deb ... Unpacking libpipeline1:i386 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../10-man-db_2.13.0-1_i386.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../11-m4_1.4.19-4_i386.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../12-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../13-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../14-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../15-autopoint_0.22.5-3_all.deb ... Unpacking autopoint (0.22.5-3) ... Selecting previously unselected package python3-scour. Preparing to unpack .../16-python3-scour_0.38.2-5_all.deb ... Unpacking python3-scour (0.38.2-5) ... Selecting previously unselected package scour. Preparing to unpack .../17-scour_0.38.2-5_all.deb ... Unpacking scour (0.38.2-5) ... Selecting previously unselected package cdbs. Preparing to unpack .../18-cdbs_0.4.167_all.deb ... Unpacking cdbs (0.4.167) ... Selecting previously unselected package chrpath. Preparing to unpack .../19-chrpath_0.18-1_i386.deb ... Unpacking chrpath (0.18-1) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../20-libdebhelper-perl_13.23_all.deb ... Unpacking libdebhelper-perl (13.23) ... Selecting previously unselected package libtool. Preparing to unpack .../21-libtool_2.4.7-8_all.deb ... Unpacking libtool (2.4.7-8) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../22-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../23-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../24-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../25-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:i386. Preparing to unpack .../26-libelf1t64_0.192-4_i386.deb ... Unpacking libelf1t64:i386 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../27-dwz_0.15-1+b1_i386.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libunistring5:i386. Preparing to unpack .../28-libunistring5_1.3-1_i386.deb ... Unpacking libunistring5:i386 (1.3-1) ... Selecting previously unselected package libicu72:i386. Preparing to unpack .../29-libicu72_72.1-5+b1_i386.deb ... Unpacking libicu72:i386 (72.1-5+b1) ... Selecting previously unselected package libxml2:i386. Preparing to unpack .../30-libxml2_2.12.7+dfsg+really2.9.14-0.2+b1_i386.deb ... Unpacking libxml2:i386 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Selecting previously unselected package gettext. Preparing to unpack .../31-gettext_0.22.5-3_i386.deb ... Unpacking gettext (0.22.5-3) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../32-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../33-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../34-debhelper_13.23_all.deb ... Unpacking debhelper (13.23) ... Selecting previously unselected package libsysfs2:i386. Preparing to unpack .../35-libsysfs2_2.1.1-6+b1_i386.deb ... Unpacking libsysfs2:i386 (2.1.1-6+b1) ... Selecting previously unselected package libsysfs-dev:i386. Preparing to unpack .../36-libsysfs-dev_2.1.1-6+b1_i386.deb ... Unpacking libsysfs-dev:i386 (2.1.1-6+b1) ... Setting up media-types (10.1.0) ... Setting up libpipeline1:i386 (1.5.8-1) ... Setting up libkeyutils1:i386 (1.6.3-4) ... Setting up libicu72:i386 (72.1-5+b1) ... Setting up bsdextrautils (2.40.2-13) ... Setting up libsysfs2:i386 (2.1.1-6+b1) ... Setting up libmagic-mgc (1:5.45-3+b1) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libtirpc-common (1.3.4+ds-1.3) ... Setting up libdebhelper-perl (13.23) ... Setting up libmagic1t64:i386 (1:5.45-3+b1) ... Setting up gettext-base (0.22.5-3) ... Setting up m4 (1.4.19-4) ... Setting up libcom-err2:i386 (1.47.2-1) ... Setting up file (1:5.45-3+b1) ... Setting up libelf1t64:i386 (0.192-4) ... Setting up libkrb5support0:i386 (1.21.3-3) ... Setting up tzdata (2024b-4) ... Current default time zone: 'Etc/UTC' Local time is now: Thu Jan 2 11:09:10 UTC 2025. Universal Time is now: Thu Jan 2 11:09:10 UTC 2025. Run 'dpkg-reconfigure tzdata' if you wish to change it. Setting up autotools-dev (20220109.1) ... Setting up libunistring5:i386 (1.3-1) ... Setting up autopoint (0.22.5-3) ... Setting up libk5crypto3:i386 (1.21.3-3) ... Setting up autoconf (2.72-3) ... Setting up libffi8:i386 (3.4.6-1) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libsysfs-dev:i386 (2.1.1-6+b1) ... Setting up libuchardet0:i386 (0.0.8-1+b2) ... Setting up netbase (6.4) ... Setting up libkrb5-3:i386 (1.21.3-3) ... Setting up readline-common (8.2-6) ... Setting up libxml2:i386 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Setting up chrpath (0.18-1) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up gettext (0.22.5-3) ... Setting up libtool (2.4.7-8) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up libgssapi-krb5-2:i386 (1.21.3-3) ... Setting up libreadline8t64:i386 (8.2-6) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up groff-base (1.23.0-7) ... Setting up libtirpc3t64:i386 (1.3.4+ds-1.3+b1) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up libnsl2:i386 (1.3.0-3+b3) ... Setting up libpython3.12-stdlib:i386 (3.12.8-3) ... Setting up python3.12 (3.12.8-3) ... Setting up debhelper (13.23) ... Setting up libpython3-stdlib:i386 (3.12.8-1) ... Setting up python3 (3.12.8-1) ... Setting up python3-scour (0.38.2-5) ... Setting up scour (0.38.2-5) ... Setting up cdbs (0.4.167) ... Processing triggers for libc-bin (2.40-4) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.36.2-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../edac-utils_0.18+git16-g8fdc1d4-1_source.changes dpkg-buildpackage: info: source package edac-utils dpkg-buildpackage: info: source version 0.18+git16-g8fdc1d4-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Yaroslav Halchenko dpkg-source --before-build . dpkg-buildpackage: info: host architecture i386 dpkg-source: info: using options from edac-utils-0.18+git16-g8fdc1d4/debian/source/options: --extend-diff-ignore=(^|/)(config\.sub|config\.guess|Makefile)$ fakeroot debian/rules clean test -x debian/rules rm -f debian/stamp-makefile-build debian/stamp-makefile-install /usr/bin/make -C . -k distclean make[1]: Entering directory '/build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4' make[1]: *** No rule to make target 'distclean'. make[1]: Leaving directory '/build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4' make: [/usr/share/cdbs/1/class/makefile.mk:91: makefile-clean] Error 2 (ignored) rm -f debian/stamp-autotools rmdir --ignore-fail-on-non-empty . rmdir: failed to remove '.': Invalid argument make: [/usr/share/cdbs/1/class/autotools.mk:64: makefile-clean] Error 1 (ignored) set -e; if test -e debian/autoreconf.before; then \ dh_autoreconf_clean ; \ fi dh_clean rm -f debian/stamp-autotools-files rm -f debian/edac-utils.edac.init debian/rules build test -x debian/rules mkdir -p "." CDBS WARNING: DEB_DH_INSTALLINIT_ARGS is deprecated since 0.4.85 CDBS WARNING: DEB_DH_STRIP_ARGS is deprecated since 0.4.85 set -e; mv ./config/config.guess ./config/config.guess.cdbs-orig; cp --remove-destination /usr/share/misc/config.guess ./config/config.guess; set -e; mv ./config/config.sub ./config/config.sub.cdbs-orig; cp --remove-destination /usr/share/misc/config.sub ./config/config.sub; dh_autoreconf libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, 'config'. libtoolize: copying file 'config/ltmain.sh' libtoolize: putting macros in 'config'. libtoolize: copying file 'config/libtool.m4' libtoolize: copying file 'config/ltoptions.m4' libtoolize: copying file 'config/ltsugar.m4' libtoolize: copying file 'config/ltversion.m4' libtoolize: copying file 'config/lt~obsolete.m4' libtoolize: Consider adding 'AC_CONFIG_MACRO_DIRS([config])' to configure.ac, libtoolize: and rerunning libtoolize and aclocal. configure.ac:37: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. ./lib/autoconf/general.m4:2434: AC_DIAGNOSE is expanded from... aclocal.m4:429: AM_INIT_AUTOMAKE is expanded from... configure.ac:37: the top level configure.ac:45: warning: The macro 'AC_PROG_LIBTOOL' is obsolete. configure.ac:45: You should run autoupdate. config/libtool.m4:100: AC_PROG_LIBTOOL is expanded from... configure.ac:45: the top level configure.ac:37: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. For more info, see: configure.ac:37: https://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_005fINIT_005fAUTOMAKE-invocation configure.ac:43: installing 'config/compile' configure.ac:37: installing 'config/missing' src/lib/Makefile.am: installing 'config/depcomp' touch debian/stamp-autotools-files chmod a+x /build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4/./configure mkdir -p . cd . && CFLAGS="-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4=. -fstack-protector-strong -Wformat -Werror=format-security" CXXFLAGS="-g -O2 -ffile-prefix-map=/build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4=. -fstack-protector-strong -Wformat -Werror=format-security" CPPFLAGS="-Wdate-time -D_FORTIFY_SOURCE=2" LDFLAGS="-Wl,-z,relro" /build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4/./configure --build=i686-linux-gnu --prefix=/usr --includedir="\${prefix}/include" --mandir="\${prefix}/share/man" --infodir="\${prefix}/share/info" --sysconfdir=/etc --localstatedir=/var --libexecdir="\${prefix}/lib/edac-utils" --srcdir=. --disable-maintainer-mode --disable-dependency-tracking --disable-silent-rules --disable-rpath configure: WARNING: unrecognized options: --disable-rpath checking metadata... yes checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a race-free mkdir -p... /usr/bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether to enable maintainer-specific portions of Makefiles... no checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether gcc accepts -g... yes checking for gcc option to enable C11 features... none needed checking whether gcc understands -c and -o together... yes checking whether make supports the include directive... yes (GNU style) checking dependency style of gcc... none checking how to print strings... printf checking for a sed that does not truncate output... /usr/bin/sed checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for fgrep... /usr/bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert i686-pc-linux-gnu file names to i686-pc-linux-gnu format... func_convert_file_noop checking how to convert i686-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for file... file checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /usr/bin/dd checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking whether ln -s works... yes checking whether make sets $(MAKE)... (cached) yes checking whether debugging is enabled... no checking for sysfs/libsysfs.h... yes checking for libsysfs... yes checking for sysfs_open_device_tree in libsysfs... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating src/Makefile config.status: creating src/lib/Makefile config.status: creating src/lib/edac.3 config.status: creating src/util/Makefile config.status: creating src/util/edac-util.1 config.status: creating src/util/edac-ctl.8 config.status: creating src/util/edac-ctl config.status: creating src/etc/Makefile config.status: creating src/etc/edac.init config.status: creating config.h config.status: executing depfiles commands config.status: executing libtool commands configure: WARNING: unrecognized options: --disable-rpath touch debian/stamp-autotools /usr/bin/make -C . make[1]: Entering directory '/build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4' /usr/bin/make all-recursive make[2]: Entering directory '/build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4' Making all in src make[3]: Entering directory '/build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4/src' Making all in lib make[4]: Entering directory '/build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4/src/lib' /bin/bash ../../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4=. -fstack-protector-strong -Wformat -Werror=format-security -c -o libedac.lo libedac.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4=. -fstack-protector-strong -Wformat -Werror=format-security -c libedac.c -fPIC -DPIC -o .libs/libedac.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4=. -fstack-protector-strong -Wformat -Werror=format-security -c libedac.c -o libedac.o >/dev/null 2>&1 /bin/bash ../../libtool --tag=CC --mode=link gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4=. -fstack-protector-strong -Wformat -Werror=format-security -export-symbols-regex "^edac_.*" -version-info 2:1:1 -Wl,-z,relro -o libedac.la -rpath /usr/lib libedac.lo -lsysfs libtool: link: /usr/bin/nm -B .libs/libedac.o | /usr/bin/sed -n -e 's/^.*[ ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p' | /usr/bin/sed '/ __gnu_lto/d' | /usr/bin/sed 's/.* //' | sort | uniq > .libs/libedac.exp libtool: link: /usr/bin/grep -E -e "^edac_.*" ".libs/libedac.exp" > ".libs/libedac.expT" libtool: link: mv -f ".libs/libedac.expT" ".libs/libedac.exp" libtool: link: echo "{ global:" > .libs/libedac.ver libtool: link: cat .libs/libedac.exp | /usr/bin/sed -e "s/\(.*\)/\1;/" >> .libs/libedac.ver libtool: link: echo "local: *; };" >> .libs/libedac.ver libtool: link: gcc -shared -fPIC -DPIC .libs/libedac.o -lsysfs -g -O2 -fstack-protector-strong -Wl,-z -Wl,relro -Wl,-soname -Wl,libedac.so.1 -Wl,-version-script -Wl,.libs/libedac.ver -o .libs/libedac.so.1.1.1 libtool: link: (cd ".libs" && rm -f "libedac.so.1" && ln -s "libedac.so.1.1.1" "libedac.so.1") libtool: link: (cd ".libs" && rm -f "libedac.so" && ln -s "libedac.so.1.1.1" "libedac.so") libtool: link: ar cr .libs/libedac.a libedac.o libtool: link: ranlib .libs/libedac.a libtool: link: ( cd ".libs" && rm -f "libedac.la" && ln -s "../libedac.la" "libedac.la" ) make[4]: Leaving directory '/build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4/src/lib' Making all in util make[4]: Entering directory '/build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4/src/util' gcc -DHAVE_CONFIG_H -I. -I../.. -I../../src/lib/ -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4=. -fstack-protector-strong -Wformat -Werror=format-security -c -o edac-util.o edac-util.c gcc -DHAVE_CONFIG_H -I. -I../.. -I../../src/lib/ -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4=. -fstack-protector-strong -Wformat -Werror=format-security -c -o list.o list.c gcc -DHAVE_CONFIG_H -I. -I../.. -I../../src/lib/ -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4=. -fstack-protector-strong -Wformat -Werror=format-security -c -o split.o split.c split.c: In function '_next_tok': split.c:43:48: warning: comparison between pointer and zero character constant [-Wpointer-compare] 43 | while (**str != '\0' && strchr(sep, **str) != '\0') | ^~ split.c:43:29: note: did you mean to dereference the pointer? 43 | while (**str != '\0' && strchr(sep, **str) != '\0') | ^ split.c:53:48: warning: comparison between pointer and zero character constant [-Wpointer-compare] 53 | while (**str != '\0' && strchr(sep, **str) == '\0') | ^~ split.c:53:29: note: did you mean to dereference the pointer? 53 | while (**str != '\0' && strchr(sep, **str) == '\0') | ^ split.c:57:48: warning: comparison between pointer and zero character constant [-Wpointer-compare] 57 | while (**str != '\0' && strchr(sep, **str) != '\0') | ^~ split.c:57:29: note: did you mean to dereference the pointer? 57 | while (**str != '\0' && strchr(sep, **str) != '\0') | ^ /bin/bash ../../libtool --tag=CC --mode=link gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -o edac-util edac-util.o list.o split.o ../../src/lib/libedac.la libtool: link: gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z -Wl,relro -o .libs/edac-util edac-util.o list.o split.o ../../src/lib/.libs/libedac.so make[4]: Leaving directory '/build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4/src/util' Making all in etc make[4]: Entering directory '/build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4/src/etc' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4/src/etc' make[4]: Entering directory '/build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4/src' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4/src' make[3]: Leaving directory '/build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4/src' make[3]: Entering directory '/build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4' make[3]: Leaving directory '/build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4' make[2]: Leaving directory '/build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4' make[1]: Leaving directory '/build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4' touch debian/stamp-makefile-build CDBS WARNING: DEB_MAKE_CHECK_TARGET unset, not running checks fakeroot debian/rules binary test -x debian/rules dh_testroot dh_prep dh_installdirs -A mkdir -p "." CDBS WARNING: DEB_DH_INSTALLINIT_ARGS is deprecated since 0.4.85 CDBS WARNING: DEB_DH_STRIP_ARGS is deprecated since 0.4.85 set -e; set -e; CDBS WARNING: DEB_MAKE_CHECK_TARGET unset, not running checks /usr/bin/make -C . install DESTDIR=/build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4/debian/tmp/ make[1]: Entering directory '/build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4' Making install in src make[2]: Entering directory '/build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4/src' Making install in lib make[3]: Entering directory '/build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4/src/lib' make[4]: Entering directory '/build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4/src/lib' /usr/bin/mkdir -p '/build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4/debian/tmp//usr/lib' /bin/bash ../../libtool --mode=install /usr/bin/install -c libedac.la '/build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4/debian/tmp//usr/lib' libtool: install: /usr/bin/install -c .libs/libedac.so.1.1.1 /build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4/debian/tmp//usr/lib/libedac.so.1.1.1 libtool: install: (cd /build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4/debian/tmp//usr/lib && { ln -s -f libedac.so.1.1.1 libedac.so.1 || { rm -f libedac.so.1 && ln -s libedac.so.1.1.1 libedac.so.1; }; }) libtool: install: (cd /build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4/debian/tmp//usr/lib && { ln -s -f libedac.so.1.1.1 libedac.so || { rm -f libedac.so && ln -s libedac.so.1.1.1 libedac.so; }; }) libtool: install: /usr/bin/install -c .libs/libedac.lai /build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4/debian/tmp//usr/lib/libedac.la libtool: install: /usr/bin/install -c .libs/libedac.a /build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4/debian/tmp//usr/lib/libedac.a libtool: install: chmod 644 /build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4/debian/tmp//usr/lib/libedac.a libtool: install: ranlib /build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4/debian/tmp//usr/lib/libedac.a libtool: warning: remember to run 'libtool --finish /usr/lib' /usr/bin/mkdir -p '/build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4/debian/tmp//usr/include' /usr/bin/install -c -m 644 edac.h '/build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4/debian/tmp//usr/include' /usr/bin/mkdir -p '/build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4/debian/tmp//usr/share/man/man3' /usr/bin/install -c -m 644 edac.3 '/build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4/debian/tmp//usr/share/man/man3' make[4]: Leaving directory '/build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4/src/lib' make[3]: Leaving directory '/build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4/src/lib' Making install in util make[3]: Entering directory '/build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4/src/util' make[4]: Entering directory '/build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4/src/util' /usr/bin/mkdir -p '/build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4/debian/tmp//usr/bin' /bin/bash ../../libtool --mode=install /usr/bin/install -c edac-util '/build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4/debian/tmp//usr/bin' libtool: warning: '../../src/lib/libedac.la' has not been installed in '/usr/lib' libtool: install: /usr/bin/install -c .libs/edac-util /build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4/debian/tmp//usr/bin/edac-util /usr/bin/mkdir -p '/build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4/debian/tmp//usr/sbin' /usr/bin/install -c edac-ctl '/build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4/debian/tmp//usr/sbin' /usr/bin/mkdir -p '/build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4/debian/tmp//usr/share/man/man1' /usr/bin/install -c -m 644 edac-util.1 '/build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4/debian/tmp//usr/share/man/man1' /usr/bin/mkdir -p '/build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4/debian/tmp//usr/share/man/man8' /usr/bin/install -c -m 644 edac-ctl.8 '/build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4/debian/tmp//usr/share/man/man8' make[4]: Leaving directory '/build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4/src/util' make[3]: Leaving directory '/build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4/src/util' Making install in etc make[3]: Entering directory '/build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4/src/etc' make[4]: Entering directory '/build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4/src/etc' make[4]: Nothing to be done for 'install-exec-am'. /usr/bin/install -c -m 755 -d "/build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4/debian/tmp//etc/init.d"; \ /usr/bin/install -c -m 755 edac.init \ "/build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4/debian/tmp//etc/init.d/edac"; \ /usr/bin/install -c -m 755 -d "/build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4/debian/tmp//etc/edac/"; \ /usr/bin/install -c -m 644 ./labels.db "/build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4/debian/tmp//etc/edac/"; make[4]: Leaving directory '/build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4/src/etc' make[3]: Leaving directory '/build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4/src/etc' make[3]: Entering directory '/build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4/src' make[4]: Entering directory '/build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4/src' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4/src' make[3]: Leaving directory '/build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4/src' make[2]: Leaving directory '/build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4/src' make[2]: Entering directory '/build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4' make[3]: Entering directory '/build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4' make[3]: Nothing to be done for 'install-exec-am'. /usr/bin/mkdir -p '/build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4/debian/tmp//usr/share/metainfo' /usr/bin/install -c -m 644 com.github.grondo.edac-utils.metainfo.xml '/build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4/debian/tmp//usr/share/metainfo' make[3]: Leaving directory '/build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4' make[2]: Leaving directory '/build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4' make[1]: Leaving directory '/build/reproducible-path/edac-utils-0.18+git16-g8fdc1d4' touch debian/stamp-makefile-install Adding cdbs dependencies to debian/edac-utils.substvars dh_installdirs -pedac-utils \ cp debian/tmp/etc/init.d/edac debian/edac-utils.edac.init chrpath -d debian/tmp/usr/bin/edac-util Adding cdbs dependencies to debian/libedac-dev.substvars dh_installdirs -plibedac-dev \ Adding cdbs dependencies to debian/libedac1.substvars dh_installdirs -plibedac1 \ Adding cdbs dependencies to debian/libedac1-dbg.substvars dh_installdirs -plibedac1-dbg \ dh_installdocs -pedac-utils ./README ./NEWS ./TODO ./AUTHORS dh_installexamples -pedac-utils dh_installman -pedac-utils dh_installinfo -pedac-utils dh_installmenu -pedac-utils dh_installcron -pedac-utils dh_systemd_enable -pedac-utils dh_installinit -pedac-utils --name=edac -- defaults 50 dh_installdebconf -pedac-utils dh_installemacsen -pedac-utils dh_installcatalogs -pedac-utils dh_installpam -pedac-utils dh_installlogrotate -pedac-utils dh_installlogcheck -pedac-utils dh_installchangelogs -pedac-utils ./ChangeLog dh_installudev -pedac-utils dh_lintian -pedac-utils dh_bugfiles -pedac-utils dh_install -pedac-utils --sourcedir=debian/tmp dh_systemd_start -pedac-utils dh_link -pedac-utils dh_installmime -pedac-utils dh_installgsettings -pedac-utils dh_installdocs -plibedac-dev ./README ./NEWS ./TODO ./AUTHORS dh_installexamples -plibedac-dev dh_installman -plibedac-dev dh_installinfo -plibedac-dev dh_installmenu -plibedac-dev dh_installcron -plibedac-dev dh_systemd_enable -plibedac-dev dh_installinit -plibedac-dev --name=edac -- defaults 50 dh_installdebconf -plibedac-dev dh_installemacsen -plibedac-dev dh_installcatalogs -plibedac-dev dh_installpam -plibedac-dev dh_installlogrotate -plibedac-dev dh_installlogcheck -plibedac-dev dh_installchangelogs -plibedac-dev ./ChangeLog dh_installudev -plibedac-dev dh_lintian -plibedac-dev dh_bugfiles -plibedac-dev dh_install -plibedac-dev --sourcedir=debian/tmp dh_systemd_start -plibedac-dev dh_link -plibedac-dev dh_installmime -plibedac-dev dh_installgsettings -plibedac-dev dh_installdocs -plibedac1 ./README ./NEWS ./TODO ./AUTHORS dh_installexamples -plibedac1 dh_installman -plibedac1 dh_installinfo -plibedac1 dh_installmenu -plibedac1 dh_installcron -plibedac1 dh_systemd_enable -plibedac1 dh_installinit -plibedac1 --name=edac -- defaults 50 dh_installdebconf -plibedac1 dh_installemacsen -plibedac1 dh_installcatalogs -plibedac1 dh_installpam -plibedac1 dh_installlogrotate -plibedac1 dh_installlogcheck -plibedac1 dh_installchangelogs -plibedac1 ./ChangeLog dh_installudev -plibedac1 dh_lintian -plibedac1 dh_bugfiles -plibedac1 dh_install -plibedac1 --sourcedir=debian/tmp dh_systemd_start -plibedac1 dh_link -plibedac1 dh_installmime -plibedac1 dh_installgsettings -plibedac1 dh_installdocs -plibedac1-dbg ./README ./NEWS ./TODO ./AUTHORS dh_installexamples -plibedac1-dbg dh_installman -plibedac1-dbg dh_installinfo -plibedac1-dbg dh_installmenu -plibedac1-dbg dh_installcron -plibedac1-dbg dh_systemd_enable -plibedac1-dbg dh_installinit -plibedac1-dbg --name=edac -- defaults 50 dh_installdebconf -plibedac1-dbg dh_installemacsen -plibedac1-dbg dh_installcatalogs -plibedac1-dbg dh_installpam -plibedac1-dbg dh_installlogrotate -plibedac1-dbg dh_installlogcheck -plibedac1-dbg dh_installchangelogs -plibedac1-dbg ./ChangeLog dh_installudev -plibedac1-dbg dh_lintian -plibedac1-dbg dh_bugfiles -plibedac1-dbg dh_install -plibedac1-dbg --sourcedir=debian/tmp dh_systemd_start -plibedac1-dbg dh_link -plibedac1-dbg dh_installmime -plibedac1-dbg dh_installgsettings -plibedac1-dbg dh_strip -pedac-utils --dbg-package=libedac1-dbg dh_strip_nondeterminism -pedac-utils dh_compress -pedac-utils dh_fixperms -pedac-utils dh_makeshlibs -pedac-utils dh_strip -plibedac-dev --dbg-package=libedac1-dbg dh_strip_nondeterminism -plibedac-dev dh_compress -plibedac-dev dh_fixperms -plibedac-dev dh_makeshlibs -plibedac-dev dh_strip -plibedac1 --dbg-package=libedac1-dbg dh_strip_nondeterminism -plibedac1 dh_compress -plibedac1 dh_fixperms -plibedac1 dh_makeshlibs -plibedac1 dh_strip_nondeterminism -plibedac1-dbg dh_compress -plibedac1-dbg dh_fixperms -plibedac1-dbg dh_installdeb -pedac-utils dh_perl -pedac-utils dh_shlibdeps -pedac-utils dh_installdeb -plibedac-dev dh_perl -plibedac-dev dh_shlibdeps -plibedac-dev dh_installdeb -plibedac1 dh_perl -plibedac1 dh_shlibdeps -plibedac1 dh_installdeb -plibedac1-dbg dh_perl -plibedac1-dbg dh_shlibdeps -plibedac1-dbg dh_gencontrol -pedac-utils dpkg-gencontrol: warning: package edac-utils: substitution variable ${perl:Depends} unused, but is defined # only call dh_scour for packages in main if grep -q '^Component:[[:space:]]*main' /CurrentlyBuilding 2>/dev/null; then dh_scour -pedac-utils ; fi dh_md5sums -pedac-utils dh_builddeb -pedac-utils dpkg-deb: building package 'edac-utils' in '../edac-utils_0.18+git16-g8fdc1d4-1_i386.deb'. dh_gencontrol -plibedac-dev # only call dh_scour for packages in main if grep -q '^Component:[[:space:]]*main' /CurrentlyBuilding 2>/dev/null; then dh_scour -plibedac-dev ; fi dh_md5sums -plibedac-dev dh_builddeb -plibedac-dev dpkg-deb: building package 'libedac-dev' in '../libedac-dev_0.18+git16-g8fdc1d4-1_i386.deb'. dh_gencontrol -plibedac1 # only call dh_scour for packages in main if grep -q '^Component:[[:space:]]*main' /CurrentlyBuilding 2>/dev/null; then dh_scour -plibedac1 ; fi dh_md5sums -plibedac1 dh_builddeb -plibedac1 dpkg-deb: building package 'libedac1' in '../libedac1_0.18+git16-g8fdc1d4-1_i386.deb'. dh_gencontrol -plibedac1-dbg dpkg-gencontrol: warning: Depends field of package libedac1-dbg: substitution variable ${shlibs:Depends} used, but is not defined # only call dh_scour for packages in main if grep -q '^Component:[[:space:]]*main' /CurrentlyBuilding 2>/dev/null; then dh_scour -plibedac1-dbg ; fi dh_md5sums -plibedac1-dbg dh_builddeb -plibedac1-dbg dpkg-deb: building package 'libedac1-dbg' in '../libedac1-dbg_0.18+git16-g8fdc1d4-1_i386.deb'. dpkg-genbuildinfo --build=binary -O../edac-utils_0.18+git16-g8fdc1d4-1_i386.buildinfo dpkg-genchanges --build=binary -O../edac-utils_0.18+git16-g8fdc1d4-1_i386.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-source: info: using options from edac-utils-0.18+git16-g8fdc1d4/debian/source/options: --extend-diff-ignore=(^|/)(config\.sub|config\.guess|Makefile)$ dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: including full source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/57918 and its subdirectories I: Current time: Wed Jan 1 23:09:52 -12 2025 I: pbuilder-time-stamp: 1735816192 Thu Jan 2 11:09:53 UTC 2025 I: 1st build successful. Starting 2nd build on remote node ionos6-i386.debian.net. Thu Jan 2 11:09:53 UTC 2025 I: Preparing to do remote build '2' on ionos6-i386.debian.net. Thu Jan 2 11:13:27 UTC 2025 I: Deleting $TMPDIR on ionos6-i386.debian.net. Thu Jan 2 11:13:28 UTC 2025 I: edac-utils_0.18+git16-g8fdc1d4-1_i386.changes: Format: 1.8 Date: Sun, 29 Dec 2024 19:19:01 -0500 Source: edac-utils Binary: edac-utils libedac-dev libedac1 libedac1-dbg Architecture: i386 Version: 0.18+git16-g8fdc1d4-1 Distribution: unstable Urgency: medium Maintainer: Yaroslav Halchenko Changed-By: Yaroslav Halchenko Description: edac-utils - report kernel-detected PCI and ECC RAM errors libedac-dev - report kernel-detected PCI and ECC RAM errors libedac1 - report kernel-detected PCI and ECC RAM errors libedac1-dbg - report kernel-detected PCI and ECC RAM errors Closes: 681629 766926 1076572 Changes: edac-utils (0.18+git16-g8fdc1d4-1) unstable; urgency=medium . * Freshier upstream snapshot (only few small fixes) * debian/edac-utils.maintscript - added to remove no longer provided udev rules file. Thanks Petter Reinholdtsen for the recipe. Closes: #681629, #766926 * debian/control - adjusted URLs for upstream and packaging git - replaced priority extra with optional * debian/patches/1000-appstream-metainfo.patch etc - include metainfo for appstream to recommend edac-utils if compatible hardware is detected. Upstream PR: https://github.com/grondo/edac-utils/pull/20 Closes: #1076572 * add debian/source/options to ignore changes by autotools Checksums-Sha1: 8fcd08a36abf42fab2e6651512281134df73b3ff 6452 edac-utils_0.18+git16-g8fdc1d4-1_i386.buildinfo ea5759649b20ac866c504129ae1bd73b39ad59f9 26180 edac-utils_0.18+git16-g8fdc1d4-1_i386.deb 3005a9d086d00191c1d06c77d13de6420049ca5d 15064 libedac-dev_0.18+git16-g8fdc1d4-1_i386.deb b6909ecdefb8da95648e45dde8d089f0eb9cb37e 33524 libedac1-dbg_0.18+git16-g8fdc1d4-1_i386.deb 83500d1396408038f77a65521b5796296eed7013 10860 libedac1_0.18+git16-g8fdc1d4-1_i386.deb Checksums-Sha256: 0ad49072230926d187ec4351051ebfd3d4457f8c0c4dd00297a97b93308f44b7 6452 edac-utils_0.18+git16-g8fdc1d4-1_i386.buildinfo 1d06aac40bc02025e2fd2fbd793a0138d4901b47e10a735834be1805708d1037 26180 edac-utils_0.18+git16-g8fdc1d4-1_i386.deb 01628eae5ec58cda39735eb8cb9c59a2e4843e12a62d60ae4b86d5b5d5b3caaa 15064 libedac-dev_0.18+git16-g8fdc1d4-1_i386.deb 259ee5311f49e2705ac1835e135630190f56988d6feb085d26d9bdf2df1290bf 33524 libedac1-dbg_0.18+git16-g8fdc1d4-1_i386.deb 73102e331a5d6f2f176928a180f893055e1b8c2b07e051ae25f00dc196e0d588 10860 libedac1_0.18+git16-g8fdc1d4-1_i386.deb Files: e8bff74978c9d2acbbb21272e552bc8c 6452 admin optional edac-utils_0.18+git16-g8fdc1d4-1_i386.buildinfo b8e23861028f015aa58b1670992c95a5 26180 admin optional edac-utils_0.18+git16-g8fdc1d4-1_i386.deb bc1d26981b39055abfd8f7a620dcd8b4 15064 libdevel optional libedac-dev_0.18+git16-g8fdc1d4-1_i386.deb 2dcb5a332d1f168c4eac1ea66b9c8f8a 33524 debug optional libedac1-dbg_0.18+git16-g8fdc1d4-1_i386.deb c5604fc1b8bb0a96e5022f68ea126e65 10860 libs optional libedac1_0.18+git16-g8fdc1d4-1_i386.deb Thu Jan 2 11:13:29 UTC 2025 I: diffoscope 284 will be used to compare the two builds: Running as unit: rb-diffoscope-i386_5-45666.service # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.tuzS6EeG/edac-utils_0.18+git16-g8fdc1d4-1.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.tuzS6EeG/edac-utils_0.18+git16-g8fdc1d4-1.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.tuzS6EeG/edac-utils_0.18+git16-g8fdc1d4-1.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.tuzS6EeG/b1/edac-utils_0.18+git16-g8fdc1d4-1_i386.changes /srv/reproducible-results/rbuild-debian/r-b-build.tuzS6EeG/b2/edac-utils_0.18+git16-g8fdc1d4-1_i386.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.359s) 0.359s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.022s) 0.022s 12 calls diffoscope.comparators.binary.FilesystemFile ## specialize (total time: 0.000s) 0.000s 1 call specialize Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 708ms CPU time consumed: 708ms Thu Jan 2 11:13:30 UTC 2025 I: diffoscope 284 found no differences in the changes files, and a .buildinfo file also exists. Thu Jan 2 11:13:30 UTC 2025 I: edac-utils from unstable built successfully and reproducibly on i386. Thu Jan 2 11:13:32 UTC 2025 I: Submitting .buildinfo files to external archives: Thu Jan 2 11:13:32 UTC 2025 I: Submitting 8.0K b1/edac-utils_0.18+git16-g8fdc1d4-1_i386.buildinfo.asc Thu Jan 2 11:13:32 UTC 2025 I: Submitting 8.0K b2/edac-utils_0.18+git16-g8fdc1d4-1_i386.buildinfo.asc Thu Jan 2 11:13:33 UTC 2025 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Thu Jan 2 11:13:33 UTC 2025 I: Done submitting .buildinfo files. Thu Jan 2 11:13:33 UTC 2025 I: Removing signed edac-utils_0.18+git16-g8fdc1d4-1_i386.buildinfo.asc files: removed './b1/edac-utils_0.18+git16-g8fdc1d4-1_i386.buildinfo.asc' removed './b2/edac-utils_0.18+git16-g8fdc1d4-1_i386.buildinfo.asc'