Sun Aug 11 10:40:29 UTC 2024 I: starting to build base-files/unstable/armhf on jenkins on '2024-08-11 10:40' Sun Aug 11 10:40:29 UTC 2024 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/armhf_34/10645/console.log Sun Aug 11 10:40:29 UTC 2024 I: Downloading source for unstable/base-files=13.5 --2024-08-11 10:40:29-- http://deb.debian.org/debian/pool/main/b/base-files/base-files_13.5.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 1100 (1.1K) [text/prs.lines.tag] Saving to: ‘base-files_13.5.dsc’ 0K . 100% 139M=0s 2024-08-11 10:40:29 (139 MB/s) - ‘base-files_13.5.dsc’ saved [1100/1100] Sun Aug 11 10:40:29 UTC 2024 I: base-files_13.5.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (native) Source: base-files Binary: base-files Architecture: any Version: 13.5 Maintainer: Santiago Vila Standards-Version: 4.7.0 Build-Depends: debhelper-compat (= 13), debhelper (>= 13.10~) Package-List: base-files deb admin required arch=any essential=yes Checksums-Sha1: ae6c94c25bc4dd553d22351d4b876834144c5c77 68200 base-files_13.5.tar.xz Checksums-Sha256: a478a680b60c63c0ae78fef166ae681adc945b29a2aea4c2d03ba2921b72d419 68200 base-files_13.5.tar.xz Files: 9f6a4b45ac4a245a951bbf121c2b3362 68200 base-files_13.5.tar.xz -----BEGIN PGP SIGNATURE----- iQEzBAEBCgAdFiEE1Uw7+v+wQt44LaXXQc5/C58bizIFAmav9SwACgkQQc5/C58b izJcvAf/WMw5Qbvc4cBV9pz5E+GOAWT9z/sY4cbJUOy6X+MexqAGRpLOPgdU4rfn fsvr0o4CBFK0jaFDtln9wfdwhoPE/BopsOtvoaW7HUALcUp5hY73Hw533LGx8HFa vPrB7MMXA1Tt+eIQKmLVBIpJi8t7sj2eY88BJN5WiJSMn+FcA5insL+s20nmc5Lr nW7xixNNh+S80ZKusV+OfY/CvqDKKQ5cBTkktOARWgh+eH5kDHW5G2vq4/pQXLFK JbPJqqRdGZHzmH9bzxFjcjUL3f8DF1TzJi7O1kF70LzPkdgQwVP8jZduUMPOgvY4 gMe7+krKpbE2WDNNk18duVkYqC7bIQ== =XjTr -----END PGP SIGNATURE----- Sun Aug 11 10:40:29 UTC 2024 I: Checking whether the package is not for us Sun Aug 11 10:40:29 UTC 2024 I: Starting 1st build on remote node virt32z-armhf-rb.debian.net. Sun Aug 11 10:40:29 UTC 2024 I: Preparing to do remote build '1' on virt32z-armhf-rb.debian.net. Sun Aug 11 10:41:19 UTC 2024 I: Deleting $TMPDIR on virt32z-armhf-rb.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Sat Aug 10 22:40:35 -12 2024 I: pbuilder-time-stamp: 1723372835 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/unstable-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [base-files_13.5.dsc] I: copying [./base-files_13.5.tar.xz] I: Extracting source gpgv: Signature made Sun Aug 4 21:39:56 2024 gpgv: using RSA key D54C3BFAFFB042DE382DA5D741CE7F0B9F1B8B32 gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./base-files_13.5.dsc: no acceptable signature found dpkg-source: info: extracting base-files in base-files-13.5 dpkg-source: info: unpacking base-files_13.5.tar.xz I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/8842/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='armhf' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=3 ' DISTRIBUTION='unstable' HOME='/root' HOST_ARCH='armhf' IFS=' ' INVOCATION_ID='06e1caf0d06a4764a077b7973575e865' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='8842' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.0oXdG0E1/pbuilderrc_Q7Fo --distribution unstable --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/unstable-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.0oXdG0E1/b1 --logfile b1/build.log base-files_13.5.dsc' SUDO_GID='110' SUDO_UID='103' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://10.0.0.15:3142/' I: uname -a Linux virt32z 6.1.0-23-armmp-lpae #1 SMP Debian 6.1.99-1 (2024-07-15) armv7l GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Aug 4 21:30 /bin -> usr/bin I: user script /srv/workspace/pbuilder/8842/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: armhf Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), debhelper (>= 13.10~) dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19448 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on debhelper (>= 13.10~); however: Package debhelper is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libicu72{a} libmagic-mgc{a} libmagic1t64{a} libpipeline1{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 29 newly installed, 0 to remove and 0 not upgraded. Need to get 18.9 MB of archives. After unpacking 70.0 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian unstable/main armhf sensible-utils all 0.0.24 [24.8 kB] Get: 2 http://deb.debian.org/debian unstable/main armhf libmagic-mgc armhf 1:5.45-3 [314 kB] Get: 3 http://deb.debian.org/debian unstable/main armhf libmagic1t64 armhf 1:5.45-3 [98.1 kB] Get: 4 http://deb.debian.org/debian unstable/main armhf file armhf 1:5.45-3 [42.0 kB] Get: 5 http://deb.debian.org/debian unstable/main armhf gettext-base armhf 0.22.5-2 [195 kB] Get: 6 http://deb.debian.org/debian unstable/main armhf libuchardet0 armhf 0.0.8-1+b1 [65.7 kB] Get: 7 http://deb.debian.org/debian unstable/main armhf groff-base armhf 1.23.0-5 [1091 kB] Get: 8 http://deb.debian.org/debian unstable/main armhf bsdextrautils armhf 2.40.2-6 [88.4 kB] Get: 9 http://deb.debian.org/debian unstable/main armhf libpipeline1 armhf 1.5.7-2 [33.3 kB] Get: 10 http://deb.debian.org/debian unstable/main armhf man-db armhf 2.12.1-3 [1376 kB] Get: 11 http://deb.debian.org/debian unstable/main armhf m4 armhf 1.4.19-4 [264 kB] Get: 12 http://deb.debian.org/debian unstable/main armhf autoconf all 2.71-3 [332 kB] Get: 13 http://deb.debian.org/debian unstable/main armhf autotools-dev all 20220109.1 [51.6 kB] Get: 14 http://deb.debian.org/debian unstable/main armhf automake all 1:1.16.5-1.3 [823 kB] Get: 15 http://deb.debian.org/debian unstable/main armhf autopoint all 0.22.5-2 [723 kB] Get: 16 http://deb.debian.org/debian unstable/main armhf libdebhelper-perl all 13.16 [88.6 kB] Get: 17 http://deb.debian.org/debian unstable/main armhf libtool all 2.4.7-7 [517 kB] Get: 18 http://deb.debian.org/debian unstable/main armhf dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian unstable/main armhf libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian unstable/main armhf libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get: 21 http://deb.debian.org/debian unstable/main armhf dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get: 22 http://deb.debian.org/debian unstable/main armhf libelf1t64 armhf 0.191-2 [183 kB] Get: 23 http://deb.debian.org/debian unstable/main armhf dwz armhf 0.15-1+b2 [106 kB] Get: 24 http://deb.debian.org/debian unstable/main armhf libicu72 armhf 72.1-5 [9075 kB] Get: 25 http://deb.debian.org/debian unstable/main armhf libxml2 armhf 2.12.7+dfsg-3+b1 [583 kB] Get: 26 http://deb.debian.org/debian unstable/main armhf gettext armhf 0.22.5-2 [1485 kB] Get: 27 http://deb.debian.org/debian unstable/main armhf intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian unstable/main armhf po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian unstable/main armhf debhelper all 13.16 [891 kB] Fetched 18.9 MB in 0s (57.7 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19448 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3_armhf.deb ... Unpacking libmagic-mgc (1:5.45-3) ... Selecting previously unselected package libmagic1t64:armhf. Preparing to unpack .../02-libmagic1t64_1%3a5.45-3_armhf.deb ... Unpacking libmagic1t64:armhf (1:5.45-3) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-3_armhf.deb ... Unpacking file (1:5.45-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.22.5-2_armhf.deb ... Unpacking gettext-base (0.22.5-2) ... Selecting previously unselected package libuchardet0:armhf. Preparing to unpack .../05-libuchardet0_0.0.8-1+b1_armhf.deb ... Unpacking libuchardet0:armhf (0.0.8-1+b1) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-5_armhf.deb ... Unpacking groff-base (1.23.0-5) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.40.2-6_armhf.deb ... Unpacking bsdextrautils (2.40.2-6) ... Selecting previously unselected package libpipeline1:armhf. Preparing to unpack .../08-libpipeline1_1.5.7-2_armhf.deb ... Unpacking libpipeline1:armhf (1.5.7-2) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.12.1-3_armhf.deb ... Unpacking man-db (2.12.1-3) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-4_armhf.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.71-3_all.deb ... Unpacking autoconf (2.71-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.22.5-2_all.deb ... Unpacking autopoint (0.22.5-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.16_all.deb ... Unpacking libdebhelper-perl (13.16) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.4.7-7_all.deb ... Unpacking libtool (2.4.7-7) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:armhf. Preparing to unpack .../21-libelf1t64_0.191-2_armhf.deb ... Unpacking libelf1t64:armhf (0.191-2) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b2_armhf.deb ... Unpacking dwz (0.15-1+b2) ... Selecting previously unselected package libicu72:armhf. Preparing to unpack .../23-libicu72_72.1-5_armhf.deb ... Unpacking libicu72:armhf (72.1-5) ... Selecting previously unselected package libxml2:armhf. Preparing to unpack .../24-libxml2_2.12.7+dfsg-3+b1_armhf.deb ... Unpacking libxml2:armhf (2.12.7+dfsg-3+b1) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.22.5-2_armhf.deb ... Unpacking gettext (0.22.5-2) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.16_all.deb ... Unpacking debhelper (13.16) ... Setting up libpipeline1:armhf (1.5.7-2) ... Setting up libicu72:armhf (72.1-5) ... Setting up bsdextrautils (2.40.2-6) ... Setting up libmagic-mgc (1:5.45-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.16) ... Setting up libmagic1t64:armhf (1:5.45-3) ... Setting up gettext-base (0.22.5-2) ... Setting up m4 (1.4.19-4) ... Setting up file (1:5.45-3) ... Setting up libelf1t64:armhf (0.191-2) ... Setting up autotools-dev (20220109.1) ... Setting up autopoint (0.22.5-2) ... Setting up autoconf (2.71-3) ... Setting up dwz (0.15-1+b2) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:armhf (0.0.8-1+b1) ... Setting up libxml2:armhf (2.12.7+dfsg-3+b1) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up gettext (0.22.5-2) ... Setting up libtool (2.4.7-7) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up groff-base (1.23.0-5) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.12.1-3) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.16) ... Processing triggers for libc-bin (2.39-6) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.33-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/reproducible-path/base-files-13.5/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../base-files_13.5_source.changes dpkg-buildpackage: info: source package base-files dpkg-buildpackage: info: source version 13.5 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Santiago Vila dpkg-source --before-build . dpkg-buildpackage: info: host architecture armhf fakeroot debian/rules clean dh clean dh_clean debian/rules execute_after_dh_clean make[1]: Entering directory '/build/reproducible-path/base-files-13.5' sh debian/timestamps make[1]: Leaving directory '/build/reproducible-path/base-files-13.5' debian/rules build dh build dh_update_autotools_config dh_autoreconf debian/rules override_dh_auto_build make[1]: Entering directory '/build/reproducible-path/base-files-13.5' sh debian/check-md5sum-etc profile set -e; { \ echo "# Triggers for creating multilib aliasing symlinks on demand"; \ for d in lib32 lib64 libo32 libx32; do \ echo "interest-noawait /usr/$d"; \ done; \ } > debian/triggers make[1]: Leaving directory '/build/reproducible-path/base-files-13.5' create-stamp debian/debhelper-build-stamp fakeroot debian/rules binary dh binary dh_testroot dh_prep dh_installdirs debian/rules execute_after_dh_installdirs make[1]: Entering directory '/build/reproducible-path/base-files-13.5' dh_installdirs usr/bin usr/lib usr/sbin make[1]: Leaving directory '/build/reproducible-path/base-files-13.5' debian/rules override_dh_auto_install make[1]: Entering directory '/build/reproducible-path/base-files-13.5' install -p -m 644 etc/* debian/base-files/etc install -p -m 755 motd/* debian/base-files/etc/update-motd.d install -p -m 644 licenses/* debian/base-files/usr/share/common-licenses install -p -m 644 origins/* debian/base-files/etc/dpkg/origins install -p -m 644 share/* debian/base-files/usr/share/base-files sed -e "s&#OSNAME#&"GNU/`uname | sed -e 's/GNU\///'`"&g" share/motd > debian/base-files/usr/share/base-files/motd sed -e "s&#OSNAME#&"GNU/`uname | sed -e 's/GNU\///'`"&g" share/info.dir > debian/base-files/usr/share/base-files/info.dir sed -e "s&#OSNAME#&"GNU/`uname | sed -e 's/GNU\///'`"&g" etc/issue > debian/base-files/etc/issue sed -e "s&#OSNAME#&"GNU/`uname | sed -e 's/GNU\///'`"&g" etc/issue.net > debian/base-files/etc/issue.net sed -e "s&#OSNAME#&"GNU/`uname | sed -e 's/GNU\///'`"&g" etc/os-release > debian/base-files/etc/os-release mv debian/base-files/etc/os-release debian/base-files/usr/lib/os-release ln -s ../usr/lib/os-release debian/base-files/etc/os-release make[1]: Leaving directory '/build/reproducible-path/base-files-13.5' dh_installdocs debian/rules override_dh_installchangelogs make[1]: Entering directory '/build/reproducible-path/base-files-13.5' dh_installchangelogs --no-trim make[1]: Leaving directory '/build/reproducible-path/base-files-13.5' dh_installman dh_lintian dh_perl debian/rules override_dh_link make[1]: Entering directory '/build/reproducible-path/base-files-13.5' dh_link -X os-release # We want these links to be relative, so we cannot use dh_link. set -e; for d in bin lib sbin ; do \ ln -s usr/$d debian/base-files/$d; \ done make[1]: Leaving directory '/build/reproducible-path/base-files-13.5' dh_strip_nondeterminism debian/rules override_dh_compress make[1]: Entering directory '/build/reproducible-path/base-files-13.5' dh_compress -X README make[1]: Leaving directory '/build/reproducible-path/base-files-13.5' debian/rules override_dh_fixperms make[1]: Entering directory '/build/reproducible-path/base-files-13.5' dh_fixperms cd debian/base-files && chown root:staff var/local cd debian/base-files && chmod 755 `find . -type d` cd debian/base-files && chmod 1777 `cat ../1777-dirs` cd debian/base-files && chmod 2775 `cat ../2775-dirs` cd debian/base-files && chmod 700 root make[1]: Leaving directory '/build/reproducible-path/base-files-13.5' dh_missing dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a debian/rules override_dh_installdeb make[1]: Entering directory '/build/reproducible-path/base-files-13.5' dh_installdeb \ '-DVENDORFILE=debian' \ '-DUSR_MERGE_MULTILIB=lib32 lib64 libo32 libx32' \ '-DUSR_MERGE_RTLDLIB=' make[1]: Leaving directory '/build/reproducible-path/base-files-13.5' dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'base-files' in '../base-files_13.5_armhf.deb'. dpkg-genbuildinfo --build=binary -O../base-files_13.5_armhf.buildinfo dpkg-genchanges --build=binary -O../base-files_13.5_armhf.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: including full source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/8842 and its subdirectories I: Current time: Sat Aug 10 22:41:14 -12 2024 I: pbuilder-time-stamp: 1723372874 Sun Aug 11 10:41:22 UTC 2024 I: 1st build successful. Starting 2nd build on remote node virt64a-armhf-rb.debian.net. Sun Aug 11 10:41:22 UTC 2024 I: Preparing to do remote build '2' on virt64a-armhf-rb.debian.net. Sun Aug 11 10:42:19 UTC 2024 I: Deleting $TMPDIR on virt64a-armhf-rb.debian.net. Sun Aug 11 10:42:21 UTC 2024 I: base-files_13.5_armhf.changes: Format: 1.8 Date: Sun, 04 Aug 2024 23:30:00 +0200 Source: base-files Binary: base-files Architecture: armhf Version: 13.5 Distribution: unstable Urgency: medium Maintainer: Santiago Vila Changed-By: Santiago Vila Description: base-files - Debian base system miscellaneous files Closes: 1077863 1077866 Changes: base-files (13.5) unstable; urgency=medium . [ Chris Hofstaedtler ] * Fix typo in preinst: lib64 -> libx32. Closes: #1077863. [ Helmut Grohne ] * Work around /lib64 link created by systemd-nspawn. Closes: #1077866. [ Santiago Vila ] * Add lintian overrides for the directories that have become symlinks. Checksums-Sha1: 1adf4a0ee6ec10fd1b6a414073634e1a5c384fc5 4410 base-files_13.5_armhf.buildinfo f721dd19a1f0015ae20cb43462033e4d7b89e94d 72760 base-files_13.5_armhf.deb Checksums-Sha256: c54ebea30eec3850abda4001e3bf29ad9bb9e6ac7b8cb88b87402e7d1be24cf9 4410 base-files_13.5_armhf.buildinfo 1c3d0711b540a3e3ea5a9eb9e5a5c2baea1945bfacdc567e2ea0a37943116594 72760 base-files_13.5_armhf.deb Files: 38600264303b88f1df5d87bb1a36bf58 4410 admin required base-files_13.5_armhf.buildinfo bc82c492940c8b54615cd4209f2330ae 72760 admin required base-files_13.5_armhf.deb Sun Aug 11 10:42:22 UTC 2024 I: diffoscope 274 will be used to compare the two builds: Running as unit: rb-diffoscope-armhf_34-10645.service # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.0oXdG0E1/base-files_13.5.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.0oXdG0E1/base-files_13.5.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.0oXdG0E1/base-files_13.5.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.0oXdG0E1/b1/base-files_13.5_armhf.changes /srv/reproducible-results/rbuild-debian/r-b-build.0oXdG0E1/b2/base-files_13.5_armhf.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.371s) 0.371s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.016s) 0.016s 12 calls diffoscope.comparators.binary.FilesystemFile ## specialize (total time: 0.000s) 0.000s 1 call specialize Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 699ms CPU time consumed: 698ms Sun Aug 11 10:42:23 UTC 2024 I: diffoscope 274 found no differences in the changes files, and a .buildinfo file also exists. Sun Aug 11 10:42:23 UTC 2024 I: base-files from unstable built successfully and reproducibly on armhf. Sun Aug 11 10:42:25 UTC 2024 I: Submitting .buildinfo files to external archives: Sun Aug 11 10:42:25 UTC 2024 I: Submitting 8.0K b1/base-files_13.5_armhf.buildinfo.asc Sun Aug 11 10:42:25 UTC 2024 I: Submitting 8.0K b2/base-files_13.5_armhf.buildinfo.asc Sun Aug 11 10:42:26 UTC 2024 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Sun Aug 11 10:42:26 UTC 2024 I: Done submitting .buildinfo files. Sun Aug 11 10:42:26 UTC 2024 I: Removing signed base-files_13.5_armhf.buildinfo.asc files: removed './b1/base-files_13.5_armhf.buildinfo.asc' removed './b2/base-files_13.5_armhf.buildinfo.asc'