Sun Feb 23 11:10:58 UTC 2025 I: starting to build dracut/unstable/arm64 on jenkins on '2025-02-23 11:10'
Sun Feb 23 11:10:58 UTC 2025 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/arm64_12/82893/console.log
Sun Feb 23 11:10:58 UTC 2025 I: Downloading source for unstable/dracut=106-5
--2025-02-23 11:10:58-- http://deb.debian.org/debian/pool/main/d/dracut/dracut_106-5.dsc
Connecting to 46.16.76.132:3128... connected.
Proxy request sent, awaiting response... 200 OK
Length: 2934 (2.9K) [text/prs.lines.tag]
Saving to: ‘dracut_106-5.dsc’
0K .. 100% 441M=0s
2025-02-23 11:10:58 (441 MB/s) - ‘dracut_106-5.dsc’ saved [2934/2934]
Sun Feb 23 11:10:58 UTC 2025 I: dracut_106-5.dsc
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256
Format: 3.0 (quilt)
Source: dracut
Binary: dracut-core, dracut, dracut-install, dracut-network, dracut-squash, dracut-live, dracut-config-generic, dracut-config-rescue, dracut-test
Architecture: any all
Version: 106-5
Maintainer: Thomas Lange <lange@debian.org>
Uploaders: Benjamin Drung <bdrung@debian.org>
Homepage: https://github.com/dracut-ng/dracut-ng/wiki
Standards-Version: 4.7.0
Vcs-Browser: https://salsa.debian.org/debian/dracut
Vcs-Git: https://salsa.debian.org/debian/dracut.git
Testsuite: autopkgtest
Testsuite-Triggers: btrfs-progs, busybox, cryptsetup, dbus, fdisk, iproute2, ipxe-qemu, isc-dhcp-client, isc-dhcp-server, kbd, linux-image-generic, lvm2, make, mdadm, mount, nbd-client, nbd-server, nfs-kernel-server, ovmf, parted, procps, qemu-efi-aarch64, qemu-efi-arm, qemu-kvm, seabios, squashfs-tools, systemd, systemd-boot-efi, systemd-container, systemd-coredump, systemd-cryptsetup, systemd-repart, systemd-sysv, systemd-ukify, sysvinit-utils, util-linux, zstd
Build-Depends: asciidoc-base, debhelper-compat (= 13), docbook-xml, docbook-xsl, libkmod-dev, pkgconf, systemd-dev, xsltproc
Package-List:
dracut deb utils optional arch=all
dracut-config-generic deb utils optional arch=all
dracut-config-rescue deb utils optional arch=all
dracut-core deb utils optional arch=any
dracut-install deb utils optional arch=any
dracut-live deb utils optional arch=all
dracut-network deb utils optional arch=all
dracut-squash deb utils optional arch=all
dracut-test deb utils optional arch=all
Checksums-Sha1:
1aa5928e8cdd419eec4884348687d2143052e4c6 527787 dracut_106.orig.tar.gz
670009bd7de5e15fb250ba40cd0d05195d9bce59 24136 dracut_106-5.debian.tar.xz
Checksums-Sha256:
d84018a4f3b6713959e0751f1ee0ca2045bfbfdfb41c6540e27c8e85b9c16d66 527787 dracut_106.orig.tar.gz
0ff0b44ab0b57f3740991485da235e27e38abcf5eaea3bb5a327f0e7cc122185 24136 dracut_106-5.debian.tar.xz
Files:
945bf6a6c66546cbcda04e80ab6e2128 527787 dracut_106.orig.tar.gz
9a323980c7e9fd917b8a8913c9310103 24136 dracut_106-5.debian.tar.xz
-----BEGIN PGP SIGNATURE-----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=QGxE
-----END PGP SIGNATURE-----
Sun Feb 23 11:10:58 UTC 2025 I: Checking whether the package is not for us
Sun Feb 23 11:10:58 UTC 2025 I: Starting 1st build on remote node codethink04-arm64.debian.net.
Sun Feb 23 11:10:58 UTC 2025 I: Preparing to do remote build '1' on codethink04-arm64.debian.net.
Sun Feb 23 11:11:42 UTC 2025 I: Deleting $TMPDIR on codethink04-arm64.debian.net.
W: cgroups are not available on the host, not using them.
I: pbuilder: network access will be disabled during build
I: Current time: Sat Feb 22 23:11:01 -12 2025
I: pbuilder-time-stamp: 1740309061
I: Building the build Environment
I: extracting base tarball [/var/cache/pbuilder/unstable-reproducible-base.tgz]
I: copying local configuration
W: --override-config is not set; not updating apt.conf Read the manpage for details.
I: mounting /proc filesystem
I: mounting /sys filesystem
I: creating /{dev,run}/shm
I: mounting /dev/pts filesystem
I: redirecting /dev/ptmx to /dev/pts/ptmx
I: policy-rc.d already exists
I: Copying source file
I: copying [dracut_106-5.dsc]
I: copying [./dracut_106.orig.tar.gz]
I: copying [./dracut_106-5.debian.tar.xz]
I: Extracting source
dpkg-source: warning: cannot verify inline signature for ./dracut_106-5.dsc: unsupported subcommand
dpkg-source: info: extracting dracut in dracut-106
dpkg-source: info: unpacking dracut_106.orig.tar.gz
dpkg-source: info: unpacking dracut_106-5.debian.tar.xz
dpkg-source: info: using patch list from debian/patches/series
dpkg-source: info: applying udevsettle
dpkg-source: info: applying debian-initramfs-post-update.patch
dpkg-source: info: applying Default-initrdname-to-initrd.img-kernel.patch
dpkg-source: info: applying test-log-error-when-constructing-sysroot.patch
dpkg-source: info: applying test-FULL-SYSTEMD-skip-systemd-network-management-if-miss.patch
dpkg-source: info: applying test-ISCSI-make-acpitable-file-a-parameter-of-run_client.patch
dpkg-source: info: applying test-use-set-eu-in-run-qemu.patch
dpkg-source: info: applying test-ISCSI-skip-root-ibft-if-qemu-acpitable-is-not-suppor.patch
dpkg-source: info: applying test-FULL-SYSTEMD-make-smbios-option-a-parameter-of-run_c.patch
dpkg-source: info: applying test-FULL-SYSTEMD-skip-encrypted-root-if-qemu-smbios-is-n.patch
dpkg-source: info: applying test-use-persistent-names-for-network-devices.patch
dpkg-source: info: applying fix-dracut-install-install-compressed-blobs-that-match-wi.patch
I: Not using root during the build.
I: Installing the build-deps
I: user script /srv/workspace/pbuilder/3190363/tmp/hooks/D02_print_environment starting
I: set
BUILDDIR='/build/reproducible-path'
BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other'
BUILDUSERNAME='pbuilder1'
BUILD_ARCH='arm64'
DEBIAN_FRONTEND='noninteractive'
DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 '
DISTRIBUTION='unstable'
HOME='/root'
HOST_ARCH='arm64'
IFS='
'
LANG='C'
LANGUAGE='en_US:en'
LC_ALL='C'
MAIL='/var/mail/root'
OPTIND='1'
PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games'
PBCURRENTCOMMANDLINEOPERATION='build'
PBUILDER_OPERATION='build'
PBUILDER_PKGDATADIR='/usr/share/pbuilder'
PBUILDER_PKGLIBDIR='/usr/lib/pbuilder'
PBUILDER_SYSCONFDIR='/etc'
PPID='3190363'
PS1='# '
PS2='> '
PS4='+ '
PWD='/'
SHELL='/bin/bash'
SHLVL='2'
SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.nUs1gU5T/pbuilderrc_OOkE --distribution unstable --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/unstable-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.nUs1gU5T/b1 --logfile b1/build.log dracut_106-5.dsc'
SUDO_GID='109'
SUDO_UID='104'
SUDO_USER='jenkins'
TERM='unknown'
TZ='/usr/share/zoneinfo/Etc/GMT+12'
USER='root'
_='/usr/sbin/chroot'
http_proxy='http://192.168.101.4:3128'
I: uname -a
Linux codethink04-arm64 6.1.0-31-cloud-arm64 #1 SMP Debian 6.1.128-1 (2025-02-07) aarch64 GNU/Linux
I: ls -l /bin
lrwxrwxrwx 1 root root 7 Nov 22 14:40 /bin -> usr/bin
I: user script /srv/workspace/pbuilder/3190363/tmp/hooks/D02_print_environment finished
-> Attempting to satisfy build-dependencies
-> Creating pbuilder-satisfydepends-dummy package
Package: pbuilder-satisfydepends-dummy
Version: 0.invalid.0
Architecture: arm64
Maintainer: Debian Pbuilder Team <pbuilder-maint@lists.alioth.debian.org>
Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder
This package was created automatically by pbuilder to satisfy the
build-dependencies of the package being currently built.
Depends: asciidoc-base, debhelper-compat (= 13), docbook-xml, docbook-xsl, libkmod-dev, pkgconf, systemd-dev, xsltproc
dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'.
Selecting previously unselected package pbuilder-satisfydepends-dummy.
(Reading database ... 19889 files and directories currently installed.)
Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ...
Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ...
dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested:
pbuilder-satisfydepends-dummy depends on asciidoc-base; however:
Package asciidoc-base is not installed.
pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however:
Package debhelper-compat is not installed.
pbuilder-satisfydepends-dummy depends on docbook-xml; however:
Package docbook-xml is not installed.
pbuilder-satisfydepends-dummy depends on docbook-xsl; however:
Package docbook-xsl is not installed.
pbuilder-satisfydepends-dummy depends on libkmod-dev; however:
Package libkmod-dev is not installed.
pbuilder-satisfydepends-dummy depends on pkgconf; however:
Package pkgconf is not installed.
pbuilder-satisfydepends-dummy depends on systemd-dev; however:
Package systemd-dev is not installed.
pbuilder-satisfydepends-dummy depends on xsltproc; however:
Package xsltproc is not installed.
Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ...
Reading package lists...
Building dependency tree...
Reading state information...
Initializing package states...
Writing extended state information...
Building tag database...
pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0)
pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0)
The following NEW packages will be installed:
asciidoc-base{a} asciidoc-common{a} autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} docbook-xml{a} docbook-xsl{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1t64{a} libexpat1{a} libffi8{a} libfile-stripnondeterminism-perl{a} libgcrypt20{a} libgpg-error0{a} libicu72{a} libkmod-dev{a} libkmod2{a} libmagic-mgc{a} libmagic1t64{a} libpipeline1{a} libpkgconf3{a} libpython3-stdlib{a} libpython3.13-minimal{a} libpython3.13-stdlib{a} libreadline8t64{a} libtool{a} libuchardet0{a} libunistring5{a} libxml2{a} libxml2-utils{a} libxslt1.1{a} m4{a} man-db{a} media-types{a} netbase{a} pkgconf{a} pkgconf-bin{a} po-debconf{a} python3{a} python3-minimal{a} python3.13{a} python3.13-minimal{a} readline-common{a} sensible-utils{a} sgml-base{a} sgml-data{a} systemd-dev{a} tzdata{a} xml-core{a} xsltproc{a}
The following packages are RECOMMENDED but will NOT be installed:
ca-certificates curl libarchive-cpio-perl libgpg-error-l10n libltdl-dev libmail-sendmail-perl lynx wget xmlto
0 packages upgraded, 62 newly installed, 0 to remove and 0 not upgraded.
Need to get 29.5 MB of archives. After unpacking 132 MB will be used.
Writing extended state information...
Get: 1 http://deb.debian.org/debian unstable/main arm64 libpython3.13-minimal arm64 3.13.2-1 [853 kB]
Get: 2 http://deb.debian.org/debian unstable/main arm64 libexpat1 arm64 2.6.4-1 [90.7 kB]
Get: 3 http://deb.debian.org/debian unstable/main arm64 python3.13-minimal arm64 3.13.2-1 [1997 kB]
Get: 4 http://deb.debian.org/debian unstable/main arm64 python3-minimal arm64 3.13.1-2 [27.0 kB]
Get: 5 http://deb.debian.org/debian unstable/main arm64 media-types all 12.0.0 [28.9 kB]
Get: 6 http://deb.debian.org/debian unstable/main arm64 netbase all 6.4 [12.8 kB]
Get: 7 http://deb.debian.org/debian unstable/main arm64 tzdata all 2025a-2 [259 kB]
Get: 8 http://deb.debian.org/debian unstable/main arm64 libffi8 arm64 3.4.7-1 [21.2 kB]
Get: 9 http://deb.debian.org/debian unstable/main arm64 readline-common all 8.2-6 [69.4 kB]
Get: 10 http://deb.debian.org/debian unstable/main arm64 libreadline8t64 arm64 8.2-6 [159 kB]
Get: 11 http://deb.debian.org/debian unstable/main arm64 libpython3.13-stdlib arm64 3.13.2-1 [1914 kB]
Get: 12 http://deb.debian.org/debian unstable/main arm64 python3.13 arm64 3.13.2-1 [745 kB]
Get: 13 http://deb.debian.org/debian unstable/main arm64 libpython3-stdlib arm64 3.13.1-2 [9952 B]
Get: 14 http://deb.debian.org/debian unstable/main arm64 python3 arm64 3.13.1-2 [28.0 kB]
Get: 15 http://deb.debian.org/debian unstable/main arm64 sgml-base all 1.31 [15.4 kB]
Get: 16 http://deb.debian.org/debian unstable/main arm64 sensible-utils all 0.0.24 [24.8 kB]
Get: 17 http://deb.debian.org/debian unstable/main arm64 libmagic-mgc arm64 1:5.45-3+b1 [314 kB]
Get: 18 http://deb.debian.org/debian unstable/main arm64 libmagic1t64 arm64 1:5.45-3+b1 [102 kB]
Get: 19 http://deb.debian.org/debian unstable/main arm64 file arm64 1:5.45-3+b1 [43.4 kB]
Get: 20 http://deb.debian.org/debian unstable/main arm64 gettext-base arm64 0.23.1-1 [241 kB]
Get: 21 http://deb.debian.org/debian unstable/main arm64 libuchardet0 arm64 0.0.8-1+b2 [69.2 kB]
Get: 22 http://deb.debian.org/debian unstable/main arm64 groff-base arm64 1.23.0-7 [1129 kB]
Get: 23 http://deb.debian.org/debian unstable/main arm64 bsdextrautils arm64 2.40.4-4 [92.1 kB]
Get: 24 http://deb.debian.org/debian unstable/main arm64 libpipeline1 arm64 1.5.8-1 [40.2 kB]
Get: 25 http://deb.debian.org/debian unstable/main arm64 man-db arm64 2.13.0-1 [1404 kB]
Get: 26 http://deb.debian.org/debian unstable/main arm64 asciidoc-common all 10.2.1-1 [104 kB]
Get: 27 http://deb.debian.org/debian unstable/main arm64 xml-core all 0.19 [20.1 kB]
Get: 28 http://deb.debian.org/debian unstable/main arm64 docbook-xsl all 1.79.2+dfsg-7 [1221 kB]
Get: 29 http://deb.debian.org/debian unstable/main arm64 libicu72 arm64 72.1-6 [9239 kB]
Get: 30 http://deb.debian.org/debian unstable/main arm64 libxml2 arm64 2.12.7+dfsg+really2.9.14-0.2+b1 [630 kB]
Get: 31 http://deb.debian.org/debian unstable/main arm64 libxml2-utils arm64 2.12.7+dfsg+really2.9.14-0.2+b1 [97.7 kB]
Get: 32 http://deb.debian.org/debian unstable/main arm64 libgpg-error0 arm64 1.51-3 [78.5 kB]
Get: 33 http://deb.debian.org/debian unstable/main arm64 libgcrypt20 arm64 1.11.0-7 [742 kB]
Get: 34 http://deb.debian.org/debian unstable/main arm64 libxslt1.1 arm64 1.1.35-1.1+b1 [222 kB]
Get: 35 http://deb.debian.org/debian unstable/main arm64 xsltproc arm64 1.1.35-1.1+b1 [115 kB]
Get: 36 http://deb.debian.org/debian unstable/main arm64 asciidoc-base all 10.2.1-1 [84.9 kB]
Get: 37 http://deb.debian.org/debian unstable/main arm64 m4 arm64 1.4.19-5 [284 kB]
Get: 38 http://deb.debian.org/debian unstable/main arm64 autoconf all 2.72-3 [493 kB]
Get: 39 http://deb.debian.org/debian unstable/main arm64 autotools-dev all 20220109.1 [51.6 kB]
Get: 40 http://deb.debian.org/debian unstable/main arm64 automake all 1:1.17-3 [862 kB]
Get: 41 http://deb.debian.org/debian unstable/main arm64 autopoint all 0.23.1-1 [770 kB]
Get: 42 http://deb.debian.org/debian unstable/main arm64 libdebhelper-perl all 13.24.1 [90.9 kB]
Get: 43 http://deb.debian.org/debian unstable/main arm64 libtool all 2.5.4-3 [539 kB]
Get: 44 http://deb.debian.org/debian unstable/main arm64 dh-autoreconf all 20 [17.1 kB]
Get: 45 http://deb.debian.org/debian unstable/main arm64 libarchive-zip-perl all 1.68-1 [104 kB]
Get: 46 http://deb.debian.org/debian unstable/main arm64 libfile-stripnondeterminism-perl all 1.14.1-2 [19.7 kB]
Get: 47 http://deb.debian.org/debian unstable/main arm64 dh-strip-nondeterminism all 1.14.1-2 [8620 B]
Get: 48 http://deb.debian.org/debian unstable/main arm64 libelf1t64 arm64 0.192-4 [189 kB]
Get: 49 http://deb.debian.org/debian unstable/main arm64 dwz arm64 0.15-1+b1 [102 kB]
Get: 50 http://deb.debian.org/debian unstable/main arm64 libunistring5 arm64 1.3-1 [449 kB]
Get: 51 http://deb.debian.org/debian unstable/main arm64 gettext arm64 0.23.1-1 [1610 kB]
Get: 52 http://deb.debian.org/debian unstable/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB]
Get: 53 http://deb.debian.org/debian unstable/main arm64 po-debconf all 1.0.21+nmu1 [248 kB]
Get: 54 http://deb.debian.org/debian unstable/main arm64 debhelper all 13.24.1 [920 kB]
Get: 55 http://deb.debian.org/debian unstable/main arm64 sgml-data all 2.0.11+nmu1 [179 kB]
Get: 56 http://deb.debian.org/debian unstable/main arm64 docbook-xml all 4.5-13 [77.4 kB]
Get: 57 http://deb.debian.org/debian unstable/main arm64 libkmod2 arm64 33+20240816-2 [59.5 kB]
Get: 58 http://deb.debian.org/debian unstable/main arm64 libkmod-dev arm64 33+20240816-2 [23.3 kB]
Get: 59 http://deb.debian.org/debian unstable/main arm64 libpkgconf3 arm64 1.8.1-4 [35.3 kB]
Get: 60 http://deb.debian.org/debian unstable/main arm64 pkgconf-bin arm64 1.8.1-4 [29.6 kB]
Get: 61 http://deb.debian.org/debian unstable/main arm64 pkgconf arm64 1.8.1-4 [26.1 kB]
Get: 62 http://deb.debian.org/debian unstable/main arm64 systemd-dev all 257.3-1 [71.3 kB]
Fetched 29.5 MB in 0s (106 MB/s)
Preconfiguring packages ...
Selecting previously unselected package libpython3.13-minimal:arm64.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 19889 files and directories currently installed.)
Preparing to unpack .../libpython3.13-minimal_3.13.2-1_arm64.deb ...
Unpacking libpython3.13-minimal:arm64 (3.13.2-1) ...
Selecting previously unselected package libexpat1:arm64.
Preparing to unpack .../libexpat1_2.6.4-1_arm64.deb ...
Unpacking libexpat1:arm64 (2.6.4-1) ...
Selecting previously unselected package python3.13-minimal.
Preparing to unpack .../python3.13-minimal_3.13.2-1_arm64.deb ...
Unpacking python3.13-minimal (3.13.2-1) ...
Setting up libpython3.13-minimal:arm64 (3.13.2-1) ...
Setting up libexpat1:arm64 (2.6.4-1) ...
Setting up python3.13-minimal (3.13.2-1) ...
Selecting previously unselected package python3-minimal.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 20223 files and directories currently installed.)
Preparing to unpack .../0-python3-minimal_3.13.1-2_arm64.deb ...
Unpacking python3-minimal (3.13.1-2) ...
Selecting previously unselected package media-types.
Preparing to unpack .../1-media-types_12.0.0_all.deb ...
Unpacking media-types (12.0.0) ...
Selecting previously unselected package netbase.
Preparing to unpack .../2-netbase_6.4_all.deb ...
Unpacking netbase (6.4) ...
Selecting previously unselected package tzdata.
Preparing to unpack .../3-tzdata_2025a-2_all.deb ...
Unpacking tzdata (2025a-2) ...
Selecting previously unselected package libffi8:arm64.
Preparing to unpack .../4-libffi8_3.4.7-1_arm64.deb ...
Unpacking libffi8:arm64 (3.4.7-1) ...
Selecting previously unselected package readline-common.
Preparing to unpack .../5-readline-common_8.2-6_all.deb ...
Unpacking readline-common (8.2-6) ...
Selecting previously unselected package libreadline8t64:arm64.
Preparing to unpack .../6-libreadline8t64_8.2-6_arm64.deb ...
Adding 'diversion of /lib/aarch64-linux-gnu/libhistory.so.8 to /lib/aarch64-linux-gnu/libhistory.so.8.usr-is-merged by libreadline8t64'
Adding 'diversion of /lib/aarch64-linux-gnu/libhistory.so.8.2 to /lib/aarch64-linux-gnu/libhistory.so.8.2.usr-is-merged by libreadline8t64'
Adding 'diversion of /lib/aarch64-linux-gnu/libreadline.so.8 to /lib/aarch64-linux-gnu/libreadline.so.8.usr-is-merged by libreadline8t64'
Adding 'diversion of /lib/aarch64-linux-gnu/libreadline.so.8.2 to /lib/aarch64-linux-gnu/libreadline.so.8.2.usr-is-merged by libreadline8t64'
Unpacking libreadline8t64:arm64 (8.2-6) ...
Selecting previously unselected package libpython3.13-stdlib:arm64.
Preparing to unpack .../7-libpython3.13-stdlib_3.13.2-1_arm64.deb ...
Unpacking libpython3.13-stdlib:arm64 (3.13.2-1) ...
Selecting previously unselected package python3.13.
Preparing to unpack .../8-python3.13_3.13.2-1_arm64.deb ...
Unpacking python3.13 (3.13.2-1) ...
Selecting previously unselected package libpython3-stdlib:arm64.
Preparing to unpack .../9-libpython3-stdlib_3.13.1-2_arm64.deb ...
Unpacking libpython3-stdlib:arm64 (3.13.1-2) ...
Setting up python3-minimal (3.13.1-2) ...
Selecting previously unselected package python3.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 21233 files and directories currently installed.)
Preparing to unpack .../00-python3_3.13.1-2_arm64.deb ...
Unpacking python3 (3.13.1-2) ...
Selecting previously unselected package sgml-base.
Preparing to unpack .../01-sgml-base_1.31_all.deb ...
Unpacking sgml-base (1.31) ...
Selecting previously unselected package sensible-utils.
Preparing to unpack .../02-sensible-utils_0.0.24_all.deb ...
Unpacking sensible-utils (0.0.24) ...
Selecting previously unselected package libmagic-mgc.
Preparing to unpack .../03-libmagic-mgc_1%3a5.45-3+b1_arm64.deb ...
Unpacking libmagic-mgc (1:5.45-3+b1) ...
Selecting previously unselected package libmagic1t64:arm64.
Preparing to unpack .../04-libmagic1t64_1%3a5.45-3+b1_arm64.deb ...
Unpacking libmagic1t64:arm64 (1:5.45-3+b1) ...
Selecting previously unselected package file.
Preparing to unpack .../05-file_1%3a5.45-3+b1_arm64.deb ...
Unpacking file (1:5.45-3+b1) ...
Selecting previously unselected package gettext-base.
Preparing to unpack .../06-gettext-base_0.23.1-1_arm64.deb ...
Unpacking gettext-base (0.23.1-1) ...
Selecting previously unselected package libuchardet0:arm64.
Preparing to unpack .../07-libuchardet0_0.0.8-1+b2_arm64.deb ...
Unpacking libuchardet0:arm64 (0.0.8-1+b2) ...
Selecting previously unselected package groff-base.
Preparing to unpack .../08-groff-base_1.23.0-7_arm64.deb ...
Unpacking groff-base (1.23.0-7) ...
Selecting previously unselected package bsdextrautils.
Preparing to unpack .../09-bsdextrautils_2.40.4-4_arm64.deb ...
Unpacking bsdextrautils (2.40.4-4) ...
Selecting previously unselected package libpipeline1:arm64.
Preparing to unpack .../10-libpipeline1_1.5.8-1_arm64.deb ...
Unpacking libpipeline1:arm64 (1.5.8-1) ...
Selecting previously unselected package man-db.
Preparing to unpack .../11-man-db_2.13.0-1_arm64.deb ...
Unpacking man-db (2.13.0-1) ...
Selecting previously unselected package asciidoc-common.
Preparing to unpack .../12-asciidoc-common_10.2.1-1_all.deb ...
Unpacking asciidoc-common (10.2.1-1) ...
Selecting previously unselected package xml-core.
Preparing to unpack .../13-xml-core_0.19_all.deb ...
Unpacking xml-core (0.19) ...
Selecting previously unselected package docbook-xsl.
Preparing to unpack .../14-docbook-xsl_1.79.2+dfsg-7_all.deb ...
Unpacking docbook-xsl (1.79.2+dfsg-7) ...
Selecting previously unselected package libicu72:arm64.
Preparing to unpack .../15-libicu72_72.1-6_arm64.deb ...
Unpacking libicu72:arm64 (72.1-6) ...
Selecting previously unselected package libxml2:arm64.
Preparing to unpack .../16-libxml2_2.12.7+dfsg+really2.9.14-0.2+b1_arm64.deb ...
Unpacking libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.2+b1) ...
Selecting previously unselected package libxml2-utils.
Preparing to unpack .../17-libxml2-utils_2.12.7+dfsg+really2.9.14-0.2+b1_arm64.deb ...
Unpacking libxml2-utils (2.12.7+dfsg+really2.9.14-0.2+b1) ...
Selecting previously unselected package libgpg-error0:arm64.
Preparing to unpack .../18-libgpg-error0_1.51-3_arm64.deb ...
Unpacking libgpg-error0:arm64 (1.51-3) ...
Selecting previously unselected package libgcrypt20:arm64.
Preparing to unpack .../19-libgcrypt20_1.11.0-7_arm64.deb ...
Unpacking libgcrypt20:arm64 (1.11.0-7) ...
Selecting previously unselected package libxslt1.1:arm64.
Preparing to unpack .../20-libxslt1.1_1.1.35-1.1+b1_arm64.deb ...
Unpacking libxslt1.1:arm64 (1.1.35-1.1+b1) ...
Selecting previously unselected package xsltproc.
Preparing to unpack .../21-xsltproc_1.1.35-1.1+b1_arm64.deb ...
Unpacking xsltproc (1.1.35-1.1+b1) ...
Selecting previously unselected package asciidoc-base.
Preparing to unpack .../22-asciidoc-base_10.2.1-1_all.deb ...
Unpacking asciidoc-base (10.2.1-1) ...
Selecting previously unselected package m4.
Preparing to unpack .../23-m4_1.4.19-5_arm64.deb ...
Unpacking m4 (1.4.19-5) ...
Selecting previously unselected package autoconf.
Preparing to unpack .../24-autoconf_2.72-3_all.deb ...
Unpacking autoconf (2.72-3) ...
Selecting previously unselected package autotools-dev.
Preparing to unpack .../25-autotools-dev_20220109.1_all.deb ...
Unpacking autotools-dev (20220109.1) ...
Selecting previously unselected package automake.
Preparing to unpack .../26-automake_1%3a1.17-3_all.deb ...
Unpacking automake (1:1.17-3) ...
Selecting previously unselected package autopoint.
Preparing to unpack .../27-autopoint_0.23.1-1_all.deb ...
Unpacking autopoint (0.23.1-1) ...
Selecting previously unselected package libdebhelper-perl.
Preparing to unpack .../28-libdebhelper-perl_13.24.1_all.deb ...
Unpacking libdebhelper-perl (13.24.1) ...
Selecting previously unselected package libtool.
Preparing to unpack .../29-libtool_2.5.4-3_all.deb ...
Unpacking libtool (2.5.4-3) ...
Selecting previously unselected package dh-autoreconf.
Preparing to unpack .../30-dh-autoreconf_20_all.deb ...
Unpacking dh-autoreconf (20) ...
Selecting previously unselected package libarchive-zip-perl.
Preparing to unpack .../31-libarchive-zip-perl_1.68-1_all.deb ...
Unpacking libarchive-zip-perl (1.68-1) ...
Selecting previously unselected package libfile-stripnondeterminism-perl.
Preparing to unpack .../32-libfile-stripnondeterminism-perl_1.14.1-2_all.deb ...
Unpacking libfile-stripnondeterminism-perl (1.14.1-2) ...
Selecting previously unselected package dh-strip-nondeterminism.
Preparing to unpack .../33-dh-strip-nondeterminism_1.14.1-2_all.deb ...
Unpacking dh-strip-nondeterminism (1.14.1-2) ...
Selecting previously unselected package libelf1t64:arm64.
Preparing to unpack .../34-libelf1t64_0.192-4_arm64.deb ...
Unpacking libelf1t64:arm64 (0.192-4) ...
Selecting previously unselected package dwz.
Preparing to unpack .../35-dwz_0.15-1+b1_arm64.deb ...
Unpacking dwz (0.15-1+b1) ...
Selecting previously unselected package libunistring5:arm64.
Preparing to unpack .../36-libunistring5_1.3-1_arm64.deb ...
Unpacking libunistring5:arm64 (1.3-1) ...
Selecting previously unselected package gettext.
Preparing to unpack .../37-gettext_0.23.1-1_arm64.deb ...
Unpacking gettext (0.23.1-1) ...
Selecting previously unselected package intltool-debian.
Preparing to unpack .../38-intltool-debian_0.35.0+20060710.6_all.deb ...
Unpacking intltool-debian (0.35.0+20060710.6) ...
Selecting previously unselected package po-debconf.
Preparing to unpack .../39-po-debconf_1.0.21+nmu1_all.deb ...
Unpacking po-debconf (1.0.21+nmu1) ...
Selecting previously unselected package debhelper.
Preparing to unpack .../40-debhelper_13.24.1_all.deb ...
Unpacking debhelper (13.24.1) ...
Selecting previously unselected package sgml-data.
Preparing to unpack .../41-sgml-data_2.0.11+nmu1_all.deb ...
Unpacking sgml-data (2.0.11+nmu1) ...
Selecting previously unselected package docbook-xml.
Preparing to unpack .../42-docbook-xml_4.5-13_all.deb ...
Unpacking docbook-xml (4.5-13) ...
Selecting previously unselected package libkmod2:arm64.
Preparing to unpack .../43-libkmod2_33+20240816-2_arm64.deb ...
Unpacking libkmod2:arm64 (33+20240816-2) ...
Selecting previously unselected package libkmod-dev:arm64.
Preparing to unpack .../44-libkmod-dev_33+20240816-2_arm64.deb ...
Unpacking libkmod-dev:arm64 (33+20240816-2) ...
Selecting previously unselected package libpkgconf3:arm64.
Preparing to unpack .../45-libpkgconf3_1.8.1-4_arm64.deb ...
Unpacking libpkgconf3:arm64 (1.8.1-4) ...
Selecting previously unselected package pkgconf-bin.
Preparing to unpack .../46-pkgconf-bin_1.8.1-4_arm64.deb ...
Unpacking pkgconf-bin (1.8.1-4) ...
Selecting previously unselected package pkgconf:arm64.
Preparing to unpack .../47-pkgconf_1.8.1-4_arm64.deb ...
Unpacking pkgconf:arm64 (1.8.1-4) ...
Selecting previously unselected package systemd-dev.
Preparing to unpack .../48-systemd-dev_257.3-1_all.deb ...
Unpacking systemd-dev (257.3-1) ...
Setting up media-types (12.0.0) ...
Setting up libpipeline1:arm64 (1.5.8-1) ...
Setting up libicu72:arm64 (72.1-6) ...
Setting up bsdextrautils (2.40.4-4) ...
Setting up libgpg-error0:arm64 (1.51-3) ...
Setting up libmagic-mgc (1:5.45-3+b1) ...
Setting up libarchive-zip-perl (1.68-1) ...
Setting up libdebhelper-perl (13.24.1) ...
Setting up libmagic1t64:arm64 (1:5.45-3+b1) ...
Setting up gettext-base (0.23.1-1) ...
Setting up m4 (1.4.19-5) ...
Setting up libgcrypt20:arm64 (1.11.0-7) ...
Setting up systemd-dev (257.3-1) ...
Setting up file (1:5.45-3+b1) ...
Setting up libelf1t64:arm64 (0.192-4) ...
Setting up tzdata (2025a-2) ...
Current default time zone: 'Etc/UTC'
Local time is now: Sun Feb 23 11:11:23 UTC 2025.
Universal Time is now: Sun Feb 23 11:11:23 UTC 2025.
Run 'dpkg-reconfigure tzdata' if you wish to change it.
Setting up autotools-dev (20220109.1) ...
Setting up libpkgconf3:arm64 (1.8.1-4) ...
Setting up libunistring5:arm64 (1.3-1) ...
Setting up autopoint (0.23.1-1) ...
Setting up pkgconf-bin (1.8.1-4) ...
Setting up autoconf (2.72-3) ...
Setting up libffi8:arm64 (3.4.7-1) ...
Setting up dwz (0.15-1+b1) ...
Setting up sensible-utils (0.0.24) ...
Setting up libuchardet0:arm64 (0.0.8-1+b2) ...
Setting up netbase (6.4) ...
Setting up sgml-base (1.31) ...
Setting up readline-common (8.2-6) ...
Setting up libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.2+b1) ...
Setting up libkmod2:arm64 (33+20240816-2) ...
Setting up automake (1:1.17-3) ...
update-alternatives: using /usr/bin/automake-1.17 to provide /usr/bin/automake (automake) in auto mode
Setting up libfile-stripnondeterminism-perl (1.14.1-2) ...
Setting up gettext (0.23.1-1) ...
Setting up libtool (2.5.4-3) ...
Setting up pkgconf:arm64 (1.8.1-4) ...
Setting up intltool-debian (0.35.0+20060710.6) ...
Setting up dh-autoreconf (20) ...
Setting up libreadline8t64:arm64 (8.2-6) ...
Setting up dh-strip-nondeterminism (1.14.1-2) ...
Setting up groff-base (1.23.0-7) ...
Setting up xml-core (0.19) ...
Setting up libxslt1.1:arm64 (1.1.35-1.1+b1) ...
Setting up libkmod-dev:arm64 (33+20240816-2) ...
Setting up libxml2-utils (2.12.7+dfsg+really2.9.14-0.2+b1) ...
Setting up libpython3.13-stdlib:arm64 (3.13.2-1) ...
Setting up libpython3-stdlib:arm64 (3.13.1-2) ...
Setting up python3.13 (3.13.2-1) ...
Setting up po-debconf (1.0.21+nmu1) ...
Setting up xsltproc (1.1.35-1.1+b1) ...
Setting up python3 (3.13.1-2) ...
Setting up man-db (2.13.0-1) ...
Not building database; man-db/auto-update is not 'true'.
Setting up asciidoc-common (10.2.1-1) ...
Setting up debhelper (13.24.1) ...
Processing triggers for libc-bin (2.40-7) ...
Processing triggers for sgml-base (1.31) ...
Setting up docbook-xsl (1.79.2+dfsg-7) ...
Setting up sgml-data (2.0.11+nmu1) ...
Setting up asciidoc-base (10.2.1-1) ...
Processing triggers for sgml-base (1.31) ...
Setting up docbook-xml (4.5-13) ...
Processing triggers for sgml-base (1.31) ...
Reading package lists...
Building dependency tree...
Reading state information...
Reading extended state information...
Initializing package states...
Writing extended state information...
Building tag database...
-> Finished parsing the build-deps
I: Building the package
I: Running cd /build/reproducible-path/dracut-106/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../dracut_106-5_source.changes
dpkg-buildpackage: info: source package dracut
dpkg-buildpackage: info: source version 106-5
dpkg-buildpackage: info: source distribution unstable
dpkg-buildpackage: info: source changed by Thomas Lange <lange@debian.org>
dpkg-source --before-build .
dpkg-buildpackage: info: host architecture arm64
dpkg-source: info: using options from dracut-106/debian/source/options: --extend-diff-ignore=(^|/).+(\.adoc)$
debian/rules clean
dh clean
dh_auto_clean
make -j12 clean
make[1]: Entering directory '/build/reproducible-path/dracut-106'
rm -f *~
rm -f */*~
rm -f */*/*~
rm -f man/lsinitrd.1.xml man/dracut.conf.5.xml man/dracut.cmdline.7.xml man/dracut.bootup.7.xml man/dracut.modules.7.xml man/dracut.8.xml man/dracut-catimages.8.xml modules.d/98dracut-systemd/dracut-cmdline.service.8.xml modules.d/98dracut-systemd/dracut-initqueue.service.8.xml modules.d/98dracut-systemd/dracut-mount.service.8.xml modules.d/98dracut-systemd/dracut-shutdown.service.8.xml modules.d/98dracut-systemd/dracut-pre-mount.service.8.xml modules.d/98dracut-systemd/dracut-pre-pivot.service.8.xml modules.d/98dracut-systemd/dracut-pre-trigger.service.8.xml modules.d/98dracut-systemd/dracut-pre-udev.service.8.xml dracut.xml
rm -f dracut-*.tar.bz2 dracut-*.tar.xz
rm -f dracut-install src/install/dracut-install src/install/dracut-install.o src/install/hashmap.o src/install/log.o src/install/strv.o src/install/util.o
rm -f src/skipcpio/skipcpio src/skipcpio/skipcpio.o
rm -f dracut-util src/util/util src/util/util.o
rm -f man/lsinitrd.1 man/dracut.conf.5 man/dracut.cmdline.7 man/dracut.bootup.7 man/dracut.modules.7 man/dracut.8 man/dracut-catimages.8 modules.d/98dracut-systemd/dracut-cmdline.service.8 modules.d/98dracut-systemd/dracut-initqueue.service.8 modules.d/98dracut-systemd/dracut-mount.service.8 modules.d/98dracut-systemd/dracut-shutdown.service.8 modules.d/98dracut-systemd/dracut-pre-mount.service.8 modules.d/98dracut-systemd/dracut-pre-pivot.service.8 modules.d/98dracut-systemd/dracut-pre-trigger.service.8 modules.d/98dracut-systemd/dracut-pre-udev.service.8
rm -f dracut.pc
rm -f dracut-cpio src/dracut-cpio/target/release/dracut-cpio*
rm -f -rf build/ doc_site/modules/ROOT/pages/man/*
make -C test clean
make[2]: Entering directory '/build/reproducible-path/dracut-106/test'
make[3]: Entering directory '/build/reproducible-path/dracut-106/test/TEST-10-BASIC'
TEST CLEANUP: root filesystem on ext4 filesystem
make[3]: Leaving directory '/build/reproducible-path/dracut-106/test/TEST-10-BASIC'
make[3]: Entering directory '/build/reproducible-path/dracut-106/test/TEST-11-USR-MOUNT'
TEST CLEANUP: root filesystem on a btrfs filesystem with /usr subvolume
make[3]: Leaving directory '/build/reproducible-path/dracut-106/test/TEST-11-USR-MOUNT'
make[3]: Entering directory '/build/reproducible-path/dracut-106/test/TEST-12-UEFI'
TEST CLEANUP: UEFI boot (ukify, kernel-install)
make[3]: Leaving directory '/build/reproducible-path/dracut-106/test/TEST-12-UEFI'
make[3]: Entering directory '/build/reproducible-path/dracut-106/test/TEST-20-STORAGE'
TEST CLEANUP: root filesystem on multiple device ext4 (on top of RAID and LUKS)
make[3]: Leaving directory '/build/reproducible-path/dracut-106/test/TEST-20-STORAGE'
make[3]: Entering directory '/build/reproducible-path/dracut-106/test/TEST-23-IMSM'
TEST CLEANUP: root filesystem on LVM PV on a isw dmraid
make[3]: Leaving directory '/build/reproducible-path/dracut-106/test/TEST-23-IMSM'
make[3]: Entering directory '/build/reproducible-path/dracut-106/test/TEST-26-ENC-RAID-LVM'
TEST CLEANUP: root filesystem on LVM on encrypted partitions of a RAID
make[3]: Leaving directory '/build/reproducible-path/dracut-106/test/TEST-26-ENC-RAID-LVM'
make[3]: Entering directory '/build/reproducible-path/dracut-106/test/TEST-30-DMSQUASH'
TEST CLEANUP: live root on a squash filesystem
make[3]: Leaving directory '/build/reproducible-path/dracut-106/test/TEST-30-DMSQUASH'
make[3]: Entering directory '/build/reproducible-path/dracut-106/test/TEST-40-SYSTEMD'
TEST CLEANUP: root filesystem on a ext4 filesystem
make[3]: Leaving directory '/build/reproducible-path/dracut-106/test/TEST-40-SYSTEMD'
make[3]: Entering directory '/build/reproducible-path/dracut-106/test/TEST-41-FULL-SYSTEMD'
TEST CLEANUP: Full systemd serialization/deserialization test with /usr mount
make[3]: Leaving directory '/build/reproducible-path/dracut-106/test/TEST-41-FULL-SYSTEMD'
make[3]: Entering directory '/build/reproducible-path/dracut-106/test/TEST-42-SYSTEMD-INITRD'
TEST CLEANUP: root filesystem on a ext4 filesystem with systemd but without dracut-systemd
make[3]: Leaving directory '/build/reproducible-path/dracut-106/test/TEST-42-SYSTEMD-INITRD'
make[3]: Entering directory '/build/reproducible-path/dracut-106/test/TEST-43-KERNEL-INSTALL'
TEST CLEANUP: kernel-install with root filesystem on ext4 filesystem
make[3]: Leaving directory '/build/reproducible-path/dracut-106/test/TEST-43-KERNEL-INSTALL'
make[3]: Entering directory '/build/reproducible-path/dracut-106/test/TEST-60-NFS'
TEST CLEANUP: root filesystem on NFS with
make[3]: Leaving directory '/build/reproducible-path/dracut-106/test/TEST-60-NFS'
make[3]: Entering directory '/build/reproducible-path/dracut-106/test/TEST-61-MULTINIC'
TEST CLEANUP: root filesystem on NFS with multiple nics with
make[3]: Leaving directory '/build/reproducible-path/dracut-106/test/TEST-61-MULTINIC'
make[3]: Entering directory '/build/reproducible-path/dracut-106/test/TEST-62-BONDBRIDGEVLAN'
TEST CLEANUP: root filesystem on NFS with bridging/bonding/vlan with
make[3]: Leaving directory '/build/reproducible-path/dracut-106/test/TEST-62-BONDBRIDGEVLAN'
make[3]: Entering directory '/build/reproducible-path/dracut-106/test/TEST-70-ISCSI'
TEST CLEANUP: root filesystem over iSCSI with
make[3]: Leaving directory '/build/reproducible-path/dracut-106/test/TEST-70-ISCSI'
make[3]: Entering directory '/build/reproducible-path/dracut-106/test/TEST-71-ISCSI-MULTI'
TEST CLEANUP: root filesystem over multiple iSCSI with
make[3]: Leaving directory '/build/reproducible-path/dracut-106/test/TEST-71-ISCSI-MULTI'
make[3]: Entering directory '/build/reproducible-path/dracut-106/test/TEST-72-NBD'
TEST CLEANUP: root filesystem on NBD with
make[3]: Leaving directory '/build/reproducible-path/dracut-106/test/TEST-72-NBD'
make[3]: Entering directory '/build/reproducible-path/dracut-106/test/TEST-80-GETARG'
TEST CLEANUP: dracut getarg command
make[3]: Leaving directory '/build/reproducible-path/dracut-106/test/TEST-80-GETARG'
make[3]: Entering directory '/build/reproducible-path/dracut-106/test/TEST-81-SKIPCPIO'
TEST CLEANUP: test skipcpio
make[3]: Leaving directory '/build/reproducible-path/dracut-106/test/TEST-81-SKIPCPIO'
make[3]: Entering directory '/build/reproducible-path/dracut-106/test/TEST-82-DRACUT-CPIO'
TEST CLEANUP: kernel cpio extraction tests for dracut-cpio
make[3]: Leaving directory '/build/reproducible-path/dracut-106/test/TEST-82-DRACUT-CPIO'
make[2]: Leaving directory '/build/reproducible-path/dracut-106/test'
make[1]: Leaving directory '/build/reproducible-path/dracut-106'
debian/rules override_dh_clean
make[1]: Entering directory '/build/reproducible-path/dracut-106'
if test -e dracut-version.sh.orig ; then \
mv -f dracut-version.sh.orig dracut-version.sh ;\
fi
dh_clean dracut.pc Makefile.inc src/skipcpio/skipcpio src/util/util
if test -d .git; then \
git status|grep modified: | awk '/.adoc/ {print $2}' | xargs -r git checkout;\
fi
make[1]: Leaving directory '/build/reproducible-path/dracut-106'
debian/rules binary
dh binary
dh_update_autotools_config
dh_autoreconf
debian/rules override_dh_auto_configure
make[1]: Entering directory '/build/reproducible-path/dracut-106'
dh_auto_configure -- --systemdsystemunitdir=/usr/lib/systemd/system --libdir=/usr/lib
./configure --build=aarch64-linux-gnu --prefix=/usr --includedir=\${prefix}/include --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info --sysconfdir=/etc --localstatedir=/var --disable-option-checking --disable-silent-rules --libdir=\${prefix}/lib/aarch64-linux-gnu --runstatedir=/run --disable-maintainer-mode --disable-dependency-tracking --systemdsystemunitdir=/usr/lib/systemd/system --libdir=/usr/lib
Ignoring unknown option '--build=aarch64-linux-gnu'
Ignoring unknown option '--disable-option-checking'
Ignoring unknown option '--disable-silent-rules'
Ignoring unknown option '--runstatedir=/run'
Ignoring unknown option '--disable-maintainer-mode'
Ignoring unknown option '--disable-dependency-tracking'
/bin/sh debian/fix-revdate
mv dracut-version.sh dracut-version.sh.orig
echo '#!/bin/sh' > dracut-version.sh
echo "DRACUT_VERSION=${DRACUT_FULL_VERSION}" >> dracut-version.sh
make[1]: Leaving directory '/build/reproducible-path/dracut-106'
dh_auto_build
make -j12
make[1]: Entering directory '/build/reproducible-path/dracut-106'
aarch64-linux-gnu-gcc -c -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/dracut-106=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2 -DCONFIG_WEAKDEP src/install/dracut-install.c -o src/install/dracut-install.o
aarch64-linux-gnu-gcc -c -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/dracut-106=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2 -DCONFIG_WEAKDEP src/install/hashmap.c -o src/install/hashmap.o
aarch64-linux-gnu-gcc -c -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/dracut-106=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2 -DCONFIG_WEAKDEP src/install/log.c -o src/install/log.o
aarch64-linux-gnu-gcc -c -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/dracut-106=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2 -DCONFIG_WEAKDEP src/install/strv.c -o src/install/strv.o
aarch64-linux-gnu-gcc -c -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/dracut-106=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2 -DCONFIG_WEAKDEP src/install/util.c -o src/install/util.o
aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/dracut-106=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2 -Wl,-z,relro -Wl,-z,now src/skipcpio/skipcpio.c -o src/skipcpio/skipcpio
aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/dracut-106=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2 -Wl,-z,relro -Wl,-z,now src/util/util.c -o src/util/util
asciidoc -f man/asciidoc.conf -a "version=106-5" -d manpage -b docbook -o "man/lsinitrd.1.xml" man/lsinitrd.1.adoc
asciidoc -f man/asciidoc.conf -a "version=106-5" -d manpage -b docbook -o "man/dracut.conf.5.xml" man/dracut.conf.5.adoc
asciidoc -f man/asciidoc.conf -a "version=106-5" -d manpage -b docbook -o "man/dracut.cmdline.7.xml" man/dracut.cmdline.7.adoc
asciidoc -f man/asciidoc.conf -a "version=106-5" -d manpage -b docbook -o "man/dracut.bootup.7.xml" man/dracut.bootup.7.adoc
asciidoc -f man/asciidoc.conf -a "version=106-5" -d manpage -b docbook -o "man/dracut.modules.7.xml" man/dracut.modules.7.adoc
asciidoc -f man/asciidoc.conf -a "version=106-5" -d manpage -b docbook -o "man/dracut.8.xml" man/dracut.8.adoc
asciidoc -f man/asciidoc.conf -a "version=106-5" -d manpage -b docbook -o "man/dracut-catimages.8.xml" man/dracut-catimages.8.adoc
asciidoc -f man/asciidoc.conf -a "version=106-5" -d manpage -b docbook -o "modules.d/98dracut-systemd/dracut-cmdline.service.8.xml" modules.d/98dracut-systemd/dracut-cmdline.service.8.adoc
asciidoc -f man/asciidoc.conf -a "version=106-5" -d manpage -b docbook -o "modules.d/98dracut-systemd/dracut-initqueue.service.8.xml" modules.d/98dracut-systemd/dracut-initqueue.service.8.adoc
asciidoc -f man/asciidoc.conf -a "version=106-5" -d manpage -b docbook -o "modules.d/98dracut-systemd/dracut-mount.service.8.xml" modules.d/98dracut-systemd/dracut-mount.service.8.adoc
asciidoc -f man/asciidoc.conf -a "version=106-5" -d manpage -b docbook -o "modules.d/98dracut-systemd/dracut-shutdown.service.8.xml" modules.d/98dracut-systemd/dracut-shutdown.service.8.adoc
asciidoc -f man/asciidoc.conf -a "version=106-5" -d manpage -b docbook -o "modules.d/98dracut-systemd/dracut-pre-mount.service.8.xml" modules.d/98dracut-systemd/dracut-pre-mount.service.8.adoc
asciidoc -f man/asciidoc.conf -a "version=106-5" -d manpage -b docbook -o "modules.d/98dracut-systemd/dracut-pre-pivot.service.8.xml" modules.d/98dracut-systemd/dracut-pre-pivot.service.8.adoc
asciidoc -f man/asciidoc.conf -a "version=106-5" -d manpage -b docbook -o "modules.d/98dracut-systemd/dracut-pre-trigger.service.8.xml" modules.d/98dracut-systemd/dracut-pre-trigger.service.8.adoc
asciidoc -f man/asciidoc.conf -a "version=106-5" -d manpage -b docbook -o "modules.d/98dracut-systemd/dracut-pre-udev.service.8.xml" modules.d/98dracut-systemd/dracut-pre-udev.service.8.adoc
cp -a src/util/util dracut-util
xsltproc -o "man/lsinitrd.1" -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl man/lsinitrd.1.xml
xsltproc -o "man/dracut.bootup.7" -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl man/dracut.bootup.7.xml
xsltproc -o "man/dracut.modules.7" -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl man/dracut.modules.7.xml
xsltproc -o "man/dracut-catimages.8" -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl man/dracut-catimages.8.xml
xsltproc -o "modules.d/98dracut-systemd/dracut-cmdline.service.8" -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98dracut-systemd/dracut-cmdline.service.8.xml
xsltproc -o "modules.d/98dracut-systemd/dracut-initqueue.service.8" -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98dracut-systemd/dracut-initqueue.service.8.xml
Note: Writing dracut.bootup.7
Note: Writing lsinitrd.1
xsltproc -o "modules.d/98dracut-systemd/dracut-mount.service.8" -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98dracut-systemd/dracut-mount.service.8.xml
Note: Writing dracut.modules.7
xsltproc -o "modules.d/98dracut-systemd/dracut-shutdown.service.8" -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98dracut-systemd/dracut-shutdown.service.8.xml
asciidoc: WARNING: dracut.cmdline.7.adoc: line 1104: missing style: [blockdef-listing]: listing
asciidoc: WARNING: dracut.cmdline.7.adoc: line 1120: missing style: [blockdef-listing]: listing
xsltproc -o "modules.d/98dracut-systemd/dracut-pre-mount.service.8" -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98dracut-systemd/dracut-pre-mount.service.8.xml
Note: Writing dracut-catimages.8
xsltproc -o "modules.d/98dracut-systemd/dracut-pre-pivot.service.8" -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98dracut-systemd/dracut-pre-pivot.service.8.xml
xsltproc -o "modules.d/98dracut-systemd/dracut-pre-trigger.service.8" -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98dracut-systemd/dracut-pre-trigger.service.8.xml
Note: Writing dracut-cmdline.service.8
xsltproc -o "modules.d/98dracut-systemd/dracut-pre-udev.service.8" -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98dracut-systemd/dracut-pre-udev.service.8.xml
Note: Writing dracut-shutdown.service.8
xsltproc -o "man/dracut.conf.5" -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl man/dracut.conf.5.xml
Note: Writing dracut-initqueue.service.8
Note: Writing dracut-mount.service.8
xsltproc -o "man/dracut.cmdline.7" -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl man/dracut.cmdline.7.xml
Note: Writing dracut-pre-pivot.service.8
Note: Writing dracut-pre-trigger.service.8
xsltproc -o "man/dracut.8" -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl man/dracut.8.xml
Note: Writing dracut-pre-mount.service.8
Note: Writing dracut-pre-udev.service.8
Note: Writing dracut.conf.5
Note: Writing dracut.cmdline.7
Note: Writing dracut.8
aarch64-linux-gnu-gcc -Wl,-z,relro -Wl,-z,now -o src/install/dracut-install src/install/dracut-install.o src/install/hashmap.o src/install/log.o src/install/strv.o src/install/util.o -lc -lkmod
ln -fs src/install/dracut-install dracut-install
rm man/dracut.modules.7.xml man/dracut-catimages.8.xml man/dracut.conf.5.xml modules.d/98dracut-systemd/dracut-mount.service.8.xml man/dracut.cmdline.7.xml modules.d/98dracut-systemd/dracut-cmdline.service.8.xml man/dracut.8.xml man/dracut.bootup.7.xml modules.d/98dracut-systemd/dracut-pre-mount.service.8.xml modules.d/98dracut-systemd/dracut-shutdown.service.8.xml modules.d/98dracut-systemd/dracut-pre-trigger.service.8.xml modules.d/98dracut-systemd/dracut-initqueue.service.8.xml modules.d/98dracut-systemd/dracut-pre-pivot.service.8.xml modules.d/98dracut-systemd/dracut-pre-udev.service.8.xml man/lsinitrd.1.xml
make[1]: Leaving directory '/build/reproducible-path/dracut-106'
create-stamp debian/debhelper-build-stamp
dh_prep
dh_installdirs
dh_auto_install
make -j12 install DESTDIR=/build/reproducible-path/dracut-106/debian/tmp AM_UPDATE_INFO_DIR=no
make[1]: Entering directory '/build/reproducible-path/dracut-106'
mkdir -p /build/reproducible-path/dracut-106/debian/tmp/usr/lib/dracut
mkdir -p /build/reproducible-path/dracut-106/debian/tmp/usr/bin
mkdir -p /build/reproducible-path/dracut-106/debian/tmp/etc
mkdir -p /build/reproducible-path/dracut-106/debian/tmp/usr/lib/dracut/modules.d
mkdir -p /build/reproducible-path/dracut-106/debian/tmp/usr/share/man/man1 /build/reproducible-path/dracut-106/debian/tmp/usr/share/man/man5 /build/reproducible-path/dracut-106/debian/tmp/usr/share/man/man7 /build/reproducible-path/dracut-106/debian/tmp/usr/share/man/man8
install -m 0755 dracut.sh /build/reproducible-path/dracut-106/debian/tmp/usr/bin/dracut
install -m 0755 dracut-catimages.sh /build/reproducible-path/dracut-106/debian/tmp/usr/bin/dracut-catimages
install -m 0755 lsinitrd.sh /build/reproducible-path/dracut-106/debian/tmp/usr/bin/lsinitrd
install -m 0644 dracut.conf /build/reproducible-path/dracut-106/debian/tmp/etc/dracut.conf
mkdir -p /build/reproducible-path/dracut-106/debian/tmp/etc/dracut.conf.d
mkdir -p /build/reproducible-path/dracut-106/debian/tmp/usr/lib/dracut/dracut.conf.d
install -m 0755 dracut-init.sh /build/reproducible-path/dracut-106/debian/tmp/usr/lib/dracut/dracut-init.sh
install -m 0755 dracut-functions.sh /build/reproducible-path/dracut-106/debian/tmp/usr/lib/dracut/dracut-functions.sh
install -m 0755 dracut-version.sh /build/reproducible-path/dracut-106/debian/tmp/usr/lib/dracut/dracut-version.sh
ln -fs dracut-functions.sh /build/reproducible-path/dracut-106/debian/tmp/usr/lib/dracut/dracut-functions
install -m 0755 dracut-logger.sh /build/reproducible-path/dracut-106/debian/tmp/usr/lib/dracut/dracut-logger.sh
install -m 0755 dracut-initramfs-restore.sh /build/reproducible-path/dracut-106/debian/tmp/usr/lib/dracut/dracut-initramfs-restore
rm -rf /build/reproducible-path/dracut-106/debian/tmp/usr/lib/dracut/modules.d/80test*
cp -arx modules.d dracut.conf.d /build/reproducible-path/dracut-106/debian/tmp/usr/lib/dracut
for i in ; do \
cp -arx dracut.conf.d/$i/* /build/reproducible-path/dracut-106/debian/tmp/usr/lib/dracut/dracut.conf.d/ ;\
done
rm -rf /build/reproducible-path/dracut-106/debian/tmp/usr/lib/dracut/modules.d/80test*
for i in man/lsinitrd.1; do install -m 0644 $i /build/reproducible-path/dracut-106/debian/tmp/usr/share/man/man1/${i##*/}; done
for i in man/dracut.conf.5; do install -m 0644 $i /build/reproducible-path/dracut-106/debian/tmp/usr/share/man/man5/${i##*/}; done
for i in man/dracut.cmdline.7 man/dracut.bootup.7 man/dracut.modules.7; do install -m 0644 $i /build/reproducible-path/dracut-106/debian/tmp/usr/share/man/man7/${i##*/}; done
for i in man/dracut.8 man/dracut-catimages.8 modules.d/98dracut-systemd/dracut-cmdline.service.8 modules.d/98dracut-systemd/dracut-initqueue.service.8 modules.d/98dracut-systemd/dracut-mount.service.8 modules.d/98dracut-systemd/dracut-shutdown.service.8 modules.d/98dracut-systemd/dracut-pre-mount.service.8 modules.d/98dracut-systemd/dracut-pre-pivot.service.8 modules.d/98dracut-systemd/dracut-pre-trigger.service.8 modules.d/98dracut-systemd/dracut-pre-udev.service.8; do install -m 0644 $i /build/reproducible-path/dracut-106/debian/tmp/usr/share/man/man8/${i##*/}; done
ln -fs dracut.cmdline.7 /build/reproducible-path/dracut-106/debian/tmp/usr/share/man/man7/dracut.kernel.7
if [ -n "/usr/lib/systemd/system" ]; then \
mkdir -p /build/reproducible-path/dracut-106/debian/tmp/usr/lib/systemd/system; \
ln -srf /build/reproducible-path/dracut-106/debian/tmp/usr/lib/dracut/modules.d/98dracut-systemd/dracut-shutdown-onfailure.service /build/reproducible-path/dracut-106/debian/tmp/usr/lib/systemd/system/dracut-shutdown-onfailure.service; \
ln -srf /build/reproducible-path/dracut-106/debian/tmp/usr/lib/dracut/modules.d/98dracut-systemd/dracut-shutdown.service /build/reproducible-path/dracut-106/debian/tmp/usr/lib/systemd/system/dracut-shutdown.service; \
mkdir -p /build/reproducible-path/dracut-106/debian/tmp/usr/lib/systemd/system/sysinit.target.wants; \
ln -sf ../dracut-shutdown.service \
/build/reproducible-path/dracut-106/debian/tmp/usr/lib/systemd/system/sysinit.target.wants/dracut-shutdown.service; \
mkdir -p /build/reproducible-path/dracut-106/debian/tmp/usr/lib/systemd/system/initrd.target.wants; \
for i in \
dracut-cmdline.service \
dracut-initqueue.service \
dracut-mount.service \
dracut-pre-mount.service \
dracut-pre-pivot.service \
dracut-pre-trigger.service \
dracut-pre-udev.service \
; do \
ln -srf /build/reproducible-path/dracut-106/debian/tmp/usr/lib/dracut/modules.d/98dracut-systemd/$i /build/reproducible-path/dracut-106/debian/tmp/usr/lib/systemd/system; \
ln -sf ../$i \
/build/reproducible-path/dracut-106/debian/tmp/usr/lib/systemd/system/initrd.target.wants/$i; \
done \
fi
if [ -f src/install/dracut-install ]; then \
install -m 0755 src/install/dracut-install /build/reproducible-path/dracut-106/debian/tmp/usr/lib/dracut/dracut-install; \
fi
if [ -f src/skipcpio/skipcpio ]; then \
install -m 0755 src/skipcpio/skipcpio /build/reproducible-path/dracut-106/debian/tmp/usr/lib/dracut/skipcpio; \
fi
if [ -f dracut-util ]; then \
install -m 0755 dracut-util /build/reproducible-path/dracut-106/debian/tmp/usr/lib/dracut/dracut-util; \
fi
mkdir -p /build/reproducible-path/dracut-106/debian/tmp/usr/lib/kernel/install.d
install -m 0755 install.d/50-dracut.install /build/reproducible-path/dracut-106/debian/tmp/usr/lib/kernel/install.d/50-dracut.install
install -m 0755 install.d/51-dracut-rescue.install /build/reproducible-path/dracut-106/debian/tmp/usr/lib/kernel/install.d/51-dracut-rescue.install
mkdir -p /build/reproducible-path/dracut-106/debian/tmp/usr/share/bash-completion/completions
install -m 0644 shell-completion/bash/dracut /build/reproducible-path/dracut-106/debian/tmp/usr/share/bash-completion/completions/dracut
install -m 0644 shell-completion/bash/lsinitrd /build/reproducible-path/dracut-106/debian/tmp/usr/share/bash-completion/completions/lsinitrd
mkdir -p /build/reproducible-path/dracut-106/debian/tmp/usr/share/pkgconfig
install -m 0644 dracut.pc /build/reproducible-path/dracut-106/debian/tmp/usr/share/pkgconfig/dracut.pc
if ! [ -n "/usr/lib/systemd/system" ]; then \
rm -rf /build/reproducible-path/dracut-106/debian/tmp/usr/lib/dracut/test/TEST-[0-9][0-9]-*SYSTEMD* ;\
rm -rf /build/reproducible-path/dracut-106/debian/tmp/usr/lib/dracut/modules.d/*systemd* /build/reproducible-path/dracut-106/debian/tmp/usr/share/man/*.service.* ; \
for i in bluetooth connman dbus* fido2 lvmmerge lvmthinpool-monitor memstrack network-manager pcsc pkcs11 rngd squash* tpm2-tss; do \
rm -rf /build/reproducible-path/dracut-106/debian/tmp/usr/lib/dracut/modules.d/[0-9][0-9]${i}; \
done \
fi
make[1]: Leaving directory '/build/reproducible-path/dracut-106'
debian/rules override_dh_install
make[1]: Entering directory '/build/reproducible-path/dracut-106'
dh_install
dh_install -pdracut-core usr/lib/systemd/system
make[1]: Leaving directory '/build/reproducible-path/dracut-106'
dh_installdocs
dh_installchangelogs
dh_installman
dh_installsystemd
dh_installlogrotate
dh_lintian
dh_perl
dh_link
dh_strip_nondeterminism
dh_compress
debian/rules override_dh_fixperms-arch
make[1]: Entering directory '/build/reproducible-path/dracut-106'
dh_fixperms
find debian/ -name "*.sh" | grep modules.d | xargs chmod 755
make[1]: Leaving directory '/build/reproducible-path/dracut-106'
debian/rules override_dh_fixperms-indep
make[1]: Entering directory '/build/reproducible-path/dracut-106'
dh_fixperms
find debian/ -name "*.sh" | grep modules.d | xargs chmod 755
rm -f debian/*/usr/lib/dracut/modules.d/98dracut-systemd/*.adoc
rm -f debian/*/usr/lib/dracut/modules.d/98dracut-systemd/*.8
for m in 80cms 81cio_ignore 91zipl 95dasd 95dasd_mod \
95dcssblk 95zfcp \
95znet; do \
rm -rf debian/*/usr/lib/dracut/modules.d/$m ; \
done
make[1]: Leaving directory '/build/reproducible-path/dracut-106'
dh_missing
dh_dwz -a
dh_strip -a
dh_makeshlibs -a
dh_shlibdeps -a
dpkg-shlibdeps: warning: diversions involved - output may be incorrect
diversion by libc6 from: /lib/ld-linux-aarch64.so.1
dpkg-shlibdeps: warning: diversions involved - output may be incorrect
diversion by libc6 to: /lib/ld-linux-aarch64.so.1.usr-is-merged
dpkg-shlibdeps: warning: diversions involved - output may be incorrect
diversion by libc6 from: /lib/ld-linux-aarch64.so.1
dpkg-shlibdeps: warning: diversions involved - output may be incorrect
diversion by libc6 to: /lib/ld-linux-aarch64.so.1.usr-is-merged
dh_installdeb
dh_gencontrol
dh_md5sums
dh_builddeb
dpkg-deb: building package 'dracut-core-dbgsym' in '../dracut-core-dbgsym_106-5_arm64.deb'.
dpkg-deb: building package 'dracut-core' in '../dracut-core_106-5_arm64.deb'.
dpkg-deb: building package 'dracut-install-dbgsym' in '../dracut-install-dbgsym_106-5_arm64.deb'.
dpkg-deb: building package 'dracut' in '../dracut_106-5_all.deb'.
dpkg-deb: building package 'dracut-squash' in '../dracut-squash_106-5_all.deb'.
dpkg-deb: building package 'dracut-network' in '../dracut-network_106-5_all.deb'.
dpkg-deb: building package 'dracut-test' in '../dracut-test_106-5_all.deb'.
dpkg-deb: building package 'dracut-live' in '../dracut-live_106-5_all.deb'.
dpkg-deb: building package 'dracut-config-rescue' in '../dracut-config-rescue_106-5_all.deb'.
dpkg-deb: building package 'dracut-install' in '../dracut-install_106-5_arm64.deb'.
dpkg-deb: building package 'dracut-config-generic' in '../dracut-config-generic_106-5_all.deb'.
dpkg-genbuildinfo --build=binary -O../dracut_106-5_arm64.buildinfo
dpkg-genchanges --build=binary -O../dracut_106-5_arm64.changes
dpkg-genchanges: info: binary-only upload (no source code included)
dpkg-source --after-build .
dpkg-source: info: using options from dracut-106/debian/source/options: --extend-diff-ignore=(^|/).+(\.adoc)$
dpkg-buildpackage: info: binary-only upload (no source included)
dpkg-genchanges: info: not including original source code in upload
I: copying local configuration
I: unmounting dev/ptmx filesystem
I: unmounting dev/pts filesystem
I: unmounting dev/shm filesystem
I: unmounting proc filesystem
I: unmounting sys filesystem
I: cleaning the build env
I: removing directory /srv/workspace/pbuilder/3190363 and its subdirectories
I: Current time: Sat Feb 22 23:11:40 -12 2025
I: pbuilder-time-stamp: 1740309100
Sun Feb 23 11:11:42 UTC 2025 I: 1st build successful. Starting 2nd build on remote node codethink03-arm64.debian.net.
Sun Feb 23 11:11:42 UTC 2025 I: Preparing to do remote build '2' on codethink03-arm64.debian.net.
Sun Feb 23 11:12:31 UTC 2025 I: Deleting $TMPDIR on codethink03-arm64.debian.net.
Sun Feb 23 11:12:32 UTC 2025 I: dracut_106-5_arm64.changes:
Format: 1.8
Date: Sat, 22 Feb 2025 14:06:40 +0100
Source: dracut
Binary: dracut dracut-config-generic dracut-config-rescue dracut-core dracut-core-dbgsym dracut-install dracut-install-dbgsym dracut-live dracut-network dracut-squash dracut-test
Architecture: all arm64
Version: 106-5
Distribution: unstable
Urgency: medium
Maintainer: Thomas Lange <lange@debian.org>
Changed-By: Thomas Lange <lange@debian.org>
Description:
dracut - Initramfs generator using udev
dracut-config-generic - dracut is an event driven initramfs infrastructure
dracut-config-rescue - dracut is an event driven initramfs infrastructure
dracut-core - dracut is an event driven initramfs infrastructure (core tools)
dracut-install - dracut is an event driven initramfs infrastructure (dracut-instal
dracut-live - dracut is an event driven initramfs infrastructure (live image mo
dracut-network - dracut is an event driven initramfs infrastructure (network modul
dracut-squash - dracut is an event driven initramfs infrastructure (squashfs modu
dracut-test - dracut is an event driven initramfs infrastructure (test modules)
Changes:
dracut (106-5) unstable; urgency=medium
.
* disable upstream test 43
Checksums-Sha1:
eb19c8a77c629a1dfda08605d5cb9066b85c6aaa 8012 dracut-config-generic_106-5_all.deb
cd1cb6c83ae5f507bc2a19261a4939b5ccfc4b76 8008 dracut-config-rescue_106-5_all.deb
a9b537b86437e54918e75ab99a966f64f9642eb0 13820 dracut-core-dbgsym_106-5_arm64.deb
81f8b6270615e35f19eadc2efde678bcee09db40 292260 dracut-core_106-5_arm64.deb
74c2188f231d0e87d3dcd00bd56823639f5cd4ed 84976 dracut-install-dbgsym_106-5_arm64.deb
df6fab1290ea9b563389ab4ff7ea3a5b74e416de 35844 dracut-install_106-5_arm64.deb
ff411553f9c9ab61d34814e17a7f080322680a40 19472 dracut-live_106-5_all.deb
eaf8f590cf80e31f11962f137254a309b7efd3c7 56756 dracut-network_106-5_all.deb
56562d0d7c8058b0d92fc93b58619a71ddc017ac 10552 dracut-squash_106-5_all.deb
6d338c6a5c8f9a03848435632d4f78b87a65d634 10248 dracut-test_106-5_all.deb
290a4c3ec862b1883debf8a72e0aa7f70bc4c720 8928 dracut_106-5_all.deb
78bd4bc92f7238a605fa62745568e62d427adcd9 8195 dracut_106-5_arm64.buildinfo
Checksums-Sha256:
43135a5f5f754fd7daa039548a8f546ac41074ccb3c9861677b4b8b0b55ab49a 8012 dracut-config-generic_106-5_all.deb
dcf5b92d72b2490dfc6189dbd2ef5f44b091eabe363e88a795356c59b715149e 8008 dracut-config-rescue_106-5_all.deb
a1782d8f4394cc2c05f55e9117c34307e2fd4f49648be861806dc5c541b74b6b 13820 dracut-core-dbgsym_106-5_arm64.deb
8e9261f48d2b820a0eb1488bf36f1b3ca3e30a2f0405c25bcf58af235a6a36f5 292260 dracut-core_106-5_arm64.deb
99904ae22eb153d95a1a2b5ec7d0332d550f8340aec75544097294ef1ca84f02 84976 dracut-install-dbgsym_106-5_arm64.deb
c30e9da5b9c12d3669b9bccbae524f484f2c33a7370ab3bcb26fd50b342f527b 35844 dracut-install_106-5_arm64.deb
6a275f81ccd0624a668b098d85f65ad3827e95411a1e8e5d99b9f726c912d4b7 19472 dracut-live_106-5_all.deb
afaad90c5181324a72f8ba3be5f9f9d7edaa82281628d2ead0107cf6846326d9 56756 dracut-network_106-5_all.deb
7578e9b2c436d1a227e3c9683d0f6c02628e665c5d2f8ffd41d6a7c3f8fc18df 10552 dracut-squash_106-5_all.deb
4191dd73def3551ff643c545ac6343091cee3507ed38d53d898ace2c12785d12 10248 dracut-test_106-5_all.deb
36d1663feb5bd56d7b479907219ebf005fe435021429b4cdb40169c64631040a 8928 dracut_106-5_all.deb
8bd57184252aff224e40b3f488dc87e7a39a0516c2a40f02555035b4b748c667 8195 dracut_106-5_arm64.buildinfo
Files:
396507abe3c227b051edcf252edb336e 8012 utils optional dracut-config-generic_106-5_all.deb
34232a55ccdd441f11588c4ec7fc83dc 8008 utils optional dracut-config-rescue_106-5_all.deb
35e46916075cf068e1d3a47a1d09e435 13820 debug optional dracut-core-dbgsym_106-5_arm64.deb
c467011ce9d180ba9f4d57ec034cc8c1 292260 utils optional dracut-core_106-5_arm64.deb
85af2e414c6762195240b69b15931511 84976 debug optional dracut-install-dbgsym_106-5_arm64.deb
099b157cbe1dd21a55fb83daeaa305ac 35844 utils optional dracut-install_106-5_arm64.deb
017a4dfc67dd8e90683c3d2af82e73b1 19472 utils optional dracut-live_106-5_all.deb
28cd7b173db710d66d7288f2fafcfdfa 56756 utils optional dracut-network_106-5_all.deb
7a7119210863879219b1b635be13a9ee 10552 utils optional dracut-squash_106-5_all.deb
746f144638f8d9f47c4505437fb776b8 10248 utils optional dracut-test_106-5_all.deb
90ebfb79ebd70819bfa95716bb8847de 8928 utils optional dracut_106-5_all.deb
a531b85230b152580d8da74999a27e49 8195 utils optional dracut_106-5_arm64.buildinfo
Sun Feb 23 11:12:33 UTC 2025 I: diffoscope 289 will be used to compare the two builds:
Running as unit: rb-diffoscope-arm64_12-82893.service
# Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.nUs1gU5T/dracut_106-5.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.nUs1gU5T/dracut_106-5.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.nUs1gU5T/dracut_106-5.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.nUs1gU5T/b1/dracut_106-5_arm64.changes /srv/reproducible-results/rbuild-debian/r-b-build.nUs1gU5T/b2/dracut_106-5_arm64.changes
## command (total time: 0.000s)
0.000s 1 call cmp (internal)
## has_same_content_as (total time: 0.000s)
0.000s 1 call diffoscope.comparators.binary.FilesystemFile
## main (total time: 0.003s)
0.003s 2 calls outputs
0.000s 1 call cleanup
Finished with result: success
Main processes terminated with: code=exited/status=0
Service runtime: 214ms
CPU time consumed: 215ms
Sun Feb 23 11:12:33 UTC 2025 I: diffoscope 289 found no differences in the changes files, and a .buildinfo file also exists.
Sun Feb 23 11:12:33 UTC 2025 I: dracut from unstable built successfully and reproducibly on arm64.
Sun Feb 23 11:12:35 UTC 2025 I: Submitting .buildinfo files to external archives:
Sun Feb 23 11:12:35 UTC 2025 I: Submitting 12K b1/dracut_106-5_arm64.buildinfo.asc
Sun Feb 23 11:12:35 UTC 2025 I: Submitting 12K b2/dracut_106-5_arm64.buildinfo.asc
Sun Feb 23 11:12:37 UTC 2025 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit.
Sun Feb 23 11:12:37 UTC 2025 I: Done submitting .buildinfo files.
Sun Feb 23 11:12:37 UTC 2025 I: Removing signed dracut_106-5_arm64.buildinfo.asc files:
removed './b1/dracut_106-5_arm64.buildinfo.asc'
removed './b2/dracut_106-5_arm64.buildinfo.asc'