Tue Jun 18 00:23:37 UTC 2024 I: starting to build debhelper/unstable/arm64 on jenkins on '2024-06-18 00:23' Tue Jun 18 00:23:37 UTC 2024 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/arm64_23/46363/console.log Tue Jun 18 00:23:37 UTC 2024 I: Downloading source for unstable/debhelper=13.16 --2024-06-18 00:23:37-- http://deb.debian.org/debian/pool/main/d/debhelper/debhelper_13.16.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 1440 (1.4K) [text/prs.lines.tag] Saving to: ‘debhelper_13.16.dsc’ 0K . 100% 220M=0s 2024-06-18 00:23:37 (220 MB/s) - ‘debhelper_13.16.dsc’ saved [1440/1440] Tue Jun 18 00:23:37 UTC 2024 I: debhelper_13.16.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (native) Source: debhelper Binary: debhelper, libdebhelper-perl Architecture: all Version: 13.16 Maintainer: Debhelper Maintainers Uploaders: Niels Thykier , Standards-Version: 4.6.1 Vcs-Browser: https://salsa.debian.org/debian/debhelper Vcs-Git: https://salsa.debian.org/debian/debhelper.git Testsuite: autopkgtest-pkg-perl Build-Depends: dpkg-dev (>= 1.18.0~), libtest-pod-perl , man-db , perl:any, po4a Package-List: debhelper deb devel optional arch=all libdebhelper-perl deb perl optional arch=all Checksums-Sha1: 89409a83a5f7fad65c093d1d87f7f3c4f8dc4eda 607900 debhelper_13.16.tar.xz Checksums-Sha256: 6b8951b754eeefc2f8044253caa5ae1a3875e2681cf378b35c7850f6cf5238a1 607900 debhelper_13.16.tar.xz Files: 7bf0543d10ca555301b05772490b5d23 607900 debhelper_13.16.tar.xz -----BEGIN PGP SIGNATURE----- iQEzBAEBCgAdFiEE9ecZmu9eXGflVYc/dA1oiINl0okFAmZwXdUACgkQdA1oiINl 0olVrAf+KTgNJBsxkARgUetcoP/BuMacoUk9iRmC+R+V4OkRHgIIghJ6n+D4SFvD SMS/FK5ggLlJzl5pZVBMf6qcQFr8t/riDFhVopv6kAzgaireNsWcTAyxhOl0wWny 2AJj5AJ83O5hHLEdaurZOoznHrq7dsGL3TFJWMBPmF7LyUGr4OhINDj9Zm+l5zGf c9V6SnnzDJ71TlCxgFSPRXqXyDyal7pPCrKhxBS5Cvr4DcZE8alXjUPRQwfyvWwC u3itg5pDYGOGv1O+QNImpbUnjmFEtzFcghaDc8cS4JTwsRGhRE36/3tTOmiDEvmg 6hPdi2grzErZUoi/xIMc2+PC1fmmFw== =CjK7 -----END PGP SIGNATURE----- Tue Jun 18 00:23:37 UTC 2024 I: Checking whether the package is not for us Tue Jun 18 00:23:37 UTC 2024 I: Starting 1st build on remote node codethink03-arm64.debian.net. Tue Jun 18 00:23:37 UTC 2024 I: Preparing to do remote build '1' on codethink03-arm64.debian.net. Tue Jun 18 00:25:41 UTC 2024 I: Deleting $TMPDIR on codethink03-arm64.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Sun Jul 20 18:46:39 -12 2025 I: pbuilder-time-stamp: 1753080399 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/unstable-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [debhelper_13.16.dsc] I: copying [./debhelper_13.16.tar.xz] I: Extracting source gpgv: Signature made Mon Jun 17 16:01:25 2024 gpgv: using RSA key F5E7199AEF5E5C67E555873F740D68888365D289 gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./debhelper_13.16.dsc: no acceptable signature found dpkg-source: info: extracting debhelper in debhelper-13.16 dpkg-source: info: unpacking debhelper_13.16.tar.xz I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/2467133/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='arm64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' DISTRIBUTION='unstable' HOME='/root' HOST_ARCH='arm64' IFS=' ' INVOCATION_ID='b0607fe71dd64ac0bda7552b17f4ec53' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='2467133' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.UgLagQeN/pbuilderrc_D1JQ --distribution unstable --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/unstable-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.UgLagQeN/b1 --logfile b1/build.log debhelper_13.16.dsc' SUDO_GID='109' SUDO_UID='104' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://192.168.101.4:3128' I: uname -a Linux codethink03-arm64 6.1.0-21-cloud-arm64 #1 SMP Debian 6.1.90-1 (2024-05-03) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Jun 5 2024 /bin -> usr/bin I: user script /srv/workspace/pbuilder/2467133/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: dpkg-dev (>= 1.18.0~), perl:any, po4a dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19700 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on po4a; however: Package po4a is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: gettext{a} gettext-base{a} libicu72{a} libosp5{a} libpod-parser-perl{a} libsgmls-perl{a} libsyntax-keyword-try-perl{a} libxml2{a} libxs-parse-keyword-perl{a} libyaml-tiny-perl{a} opensp{a} po4a{a} sgml-base{a} The following packages are RECOMMENDED but will NOT be installed: curl liblocale-gettext-perl libterm-readkey-perl libtext-wrapi18n-perl libunicode-linebreak-perl lynx wget 0 packages upgraded, 13 newly installed, 0 to remove and 0 not upgraded. Need to get 14.9 MB of archives. After unpacking 55.5 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian unstable/main arm64 sgml-base all 1.31 [15.4 kB] Get: 2 http://deb.debian.org/debian unstable/main arm64 gettext-base arm64 0.21-14+b1 [160 kB] Get: 3 http://deb.debian.org/debian unstable/main arm64 libicu72 arm64 72.1-4+b1 [9224 kB] Get: 4 http://deb.debian.org/debian unstable/main arm64 libxml2 arm64 2.12.7+dfsg-3 [609 kB] Get: 5 http://deb.debian.org/debian unstable/main arm64 gettext arm64 0.21-14+b1 [1249 kB] Get: 6 http://deb.debian.org/debian unstable/main arm64 libosp5 arm64 1.5.2-15 [917 kB] Get: 7 http://deb.debian.org/debian unstable/main arm64 libpod-parser-perl all 1.67-1 [94.1 kB] Get: 8 http://deb.debian.org/debian unstable/main arm64 libsgmls-perl all 1.03ii-38 [23.7 kB] Get: 9 http://deb.debian.org/debian unstable/main arm64 libxs-parse-keyword-perl arm64 0.42-1 [58.3 kB] Get: 10 http://deb.debian.org/debian unstable/main arm64 libsyntax-keyword-try-perl arm64 0.29-2 [26.6 kB] Get: 11 http://deb.debian.org/debian unstable/main arm64 libyaml-tiny-perl all 1.74-1 [30.7 kB] Get: 12 http://deb.debian.org/debian unstable/main arm64 opensp arm64 1.5.2-15 [444 kB] Get: 13 http://deb.debian.org/debian unstable/main arm64 po4a all 0.72-1 [2096 kB] Fetched 14.9 MB in 0s (91.9 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sgml-base. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19700 files and directories currently installed.) Preparing to unpack .../00-sgml-base_1.31_all.deb ... Unpacking sgml-base (1.31) ... Selecting previously unselected package gettext-base. Preparing to unpack .../01-gettext-base_0.21-14+b1_arm64.deb ... Unpacking gettext-base (0.21-14+b1) ... Selecting previously unselected package libicu72:arm64. Preparing to unpack .../02-libicu72_72.1-4+b1_arm64.deb ... Unpacking libicu72:arm64 (72.1-4+b1) ... Selecting previously unselected package libxml2:arm64. Preparing to unpack .../03-libxml2_2.12.7+dfsg-3_arm64.deb ... Unpacking libxml2:arm64 (2.12.7+dfsg-3) ... Selecting previously unselected package gettext. Preparing to unpack .../04-gettext_0.21-14+b1_arm64.deb ... Unpacking gettext (0.21-14+b1) ... Selecting previously unselected package libosp5. Preparing to unpack .../05-libosp5_1.5.2-15_arm64.deb ... Unpacking libosp5 (1.5.2-15) ... Selecting previously unselected package libpod-parser-perl. Preparing to unpack .../06-libpod-parser-perl_1.67-1_all.deb ... Adding 'diversion of /usr/bin/podselect to /usr/bin/podselect.bundled by libpod-parser-perl' Adding 'diversion of /usr/share/man/man1/podselect.1.gz to /usr/share/man/man1/podselect.bundled.1.gz by libpod-parser-perl' Unpacking libpod-parser-perl (1.67-1) ... Selecting previously unselected package libsgmls-perl. Preparing to unpack .../07-libsgmls-perl_1.03ii-38_all.deb ... Unpacking libsgmls-perl (1.03ii-38) ... Selecting previously unselected package libxs-parse-keyword-perl. Preparing to unpack .../08-libxs-parse-keyword-perl_0.42-1_arm64.deb ... Unpacking libxs-parse-keyword-perl (0.42-1) ... Selecting previously unselected package libsyntax-keyword-try-perl. Preparing to unpack .../09-libsyntax-keyword-try-perl_0.29-2_arm64.deb ... Unpacking libsyntax-keyword-try-perl (0.29-2) ... Selecting previously unselected package libyaml-tiny-perl. Preparing to unpack .../10-libyaml-tiny-perl_1.74-1_all.deb ... Unpacking libyaml-tiny-perl (1.74-1) ... Selecting previously unselected package opensp. Preparing to unpack .../11-opensp_1.5.2-15_arm64.deb ... Unpacking opensp (1.5.2-15) ... Selecting previously unselected package po4a. Preparing to unpack .../12-po4a_0.72-1_all.deb ... Unpacking po4a (0.72-1) ... Setting up libsgmls-perl (1.03ii-38) ... Setting up libicu72:arm64 (72.1-4+b1) ... Setting up gettext-base (0.21-14+b1) ... Setting up libyaml-tiny-perl (1.74-1) ... Setting up libosp5 (1.5.2-15) ... Setting up libxs-parse-keyword-perl (0.42-1) ... Setting up libpod-parser-perl (1.67-1) ... Setting up libsyntax-keyword-try-perl (0.29-2) ... Setting up sgml-base (1.31) ... Setting up libxml2:arm64 (2.12.7+dfsg-3) ... Setting up gettext (0.21-14+b1) ... Setting up opensp (1.5.2-15) ... Setting up po4a (0.72-1) ... Processing triggers for libc-bin (2.38-13) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/reproducible-path/debhelper-13.16/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../debhelper_13.16_source.changes dpkg-buildpackage: info: source package debhelper dpkg-buildpackage: info: source version 13.16 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Niels Thykier dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 dpkg-source: info: using options from debhelper-13.16/debian/source/options: --tar-ignore --tar-ignore=debhelper/.idea debian/rules clean ./run dh clean --without autoreconf --with build-stamp dh_auto_clean make -j12 clean make[1]: Entering directory '/build/reproducible-path/debhelper-13.16' rm -f *-stamp *.1 *.7 lib/Debian/Debhelper/Dh_Version.pm po4a --previous --rm-translations --rm-backups man/po4a/po4a.cfg for lang in de es fr ja pt; do \ if [ -e man/$lang ]; then rmdir man/$lang; fi; \ done; make[1]: Leaving directory '/build/reproducible-path/debhelper-13.16' dh_clean debian/rules binary ./run dh binary --without autoreconf --with build-stamp dh_auto_configure dh_auto_build make -j12 "INSTALL=install --strip-program=true" make[1]: Entering directory '/build/reproducible-path/debhelper-13.16' po4a --previous -L UTF-8 man/po4a/po4a.cfg printf "package Debian::Debhelper::Dh_Version;\n\$version='13.16';\n1" > \ lib/Debian/Debhelper/Dh_Version.pm cat debhelper.pod | \ perl -e ' undef $/; foreach (@ARGV) { open (IN, $_) or die "$_: $!"; $file=; close IN; if ($file=~m/=head1 .*?\n\n(.*?) - (.*?)\n\n/s) { my $item="=item $1(1)\n\n$2\n\n"; if (" dh_installmanpages " !~ / $1 /) { $list.=$item; } else { $list_deprecated.=$item; } } } END { my $recommended_compat = q{13.16}; $recommended_compat =~ s{^\d+\K(?:\D.*|\..*)?}{}; while () { s/#LIST#/$list/g; s/#LIST_DEPRECATED#/$list_deprecated/g; s/#RECOMMENDED_COMPAT#/$recommended_compat/g; print; }; }' dh_assistant dh_auto_build dh_auto_clean dh_auto_configure dh_auto_install dh_auto_test dh_bugfiles dh_builddeb dh_clean dh_compress dh_dwz dh_fixperms dh_gencontrol dh_icons dh_install dh_installalternatives dh_installcatalogs dh_installchangelogs dh_installcron dh_installdeb dh_installdebconf dh_installdirs dh_installdocs dh_installemacsen dh_installexamples dh_installgsettings dh_installifupdown dh_installinfo dh_installinit dh_installinitramfs dh_installlogcheck dh_installlogrotate dh_installman dh_installmanpages dh_installmenu dh_installmime dh_installmodules dh_installpam dh_installppp dh_installsystemd dh_installsystemduser dh_installsysusers dh_installtmpfiles dh_installudev dh_installwm dh_installxfonts dh_link dh_lintian dh_listpackages dh_makeshlibs dh_md5sums dh_missing dh_movefiles dh_movetousr dh_perl dh_prep dh_shlibdeps dh_strip dh_systemd_enable dh_systemd_start dh_testdir dh_testroot dh_ucf dh_update_autotools_config dh_usrlocal | \ pod2man --utf8 -c Debhelper -r "13.16" --name="debhelper" --section=7 > debhelper.7 pod2man --utf8 -c Debhelper -r "13.16" --name="debhelper" --section=7 debhelper-compat-upgrade-checklist.pod > debhelper-compat-upgrade-checklist.7 pod2man --utf8 -c Debhelper -r "13.16" --name="debhelper" --section=7 debhelper-obsolete-compat.pod > debhelper-obsolete-compat.7 pod2man --utf8 -c Debhelper -r "13.16" dh_assistant dh_assistant.1 pod2man --utf8 -c Debhelper -r "13.16" dh_auto_build dh_auto_build.1 pod2man --utf8 -c Debhelper -r "13.16" dh_auto_clean dh_auto_clean.1 pod2man --utf8 -c Debhelper -r "13.16" dh_auto_configure dh_auto_configure.1 pod2man --utf8 -c Debhelper -r "13.16" dh_auto_install dh_auto_install.1 pod2man --utf8 -c Debhelper -r "13.16" dh_auto_test dh_auto_test.1 pod2man --utf8 -c Debhelper -r "13.16" dh_bugfiles dh_bugfiles.1 pod2man --utf8 -c Debhelper -r "13.16" dh_builddeb dh_builddeb.1 pod2man --utf8 -c Debhelper -r "13.16" dh_clean dh_clean.1 pod2man --utf8 -c Debhelper -r "13.16" dh_compress dh_compress.1 pod2man --utf8 -c Debhelper -r "13.16" dh_dwz dh_dwz.1 pod2man --utf8 -c Debhelper -r "13.16" dh_fixperms dh_fixperms.1 pod2man --utf8 -c Debhelper -r "13.16" dh_gencontrol dh_gencontrol.1 pod2man --utf8 -c Debhelper -r "13.16" dh_icons dh_icons.1 pod2man --utf8 -c Debhelper -r "13.16" dh_install dh_install.1 pod2man --utf8 -c Debhelper -r "13.16" dh_installalternatives dh_installalternatives.1 pod2man --utf8 -c Debhelper -r "13.16" dh_installcatalogs dh_installcatalogs.1 pod2man --utf8 -c Debhelper -r "13.16" dh_installchangelogs dh_installchangelogs.1 pod2man --utf8 -c Debhelper -r "13.16" dh_installcron dh_installcron.1 pod2man --utf8 -c Debhelper -r "13.16" dh_installdeb dh_installdeb.1 pod2man --utf8 -c Debhelper -r "13.16" dh_installdebconf dh_installdebconf.1 pod2man --utf8 -c Debhelper -r "13.16" dh_installdirs dh_installdirs.1 pod2man --utf8 -c Debhelper -r "13.16" dh_installdocs dh_installdocs.1 pod2man --utf8 -c Debhelper -r "13.16" dh_installemacsen dh_installemacsen.1 pod2man --utf8 -c Debhelper -r "13.16" dh_installexamples dh_installexamples.1 pod2man --utf8 -c Debhelper -r "13.16" dh_installgsettings dh_installgsettings.1 pod2man --utf8 -c Debhelper -r "13.16" dh_installifupdown dh_installifupdown.1 pod2man --utf8 -c Debhelper -r "13.16" dh_installinfo dh_installinfo.1 pod2man --utf8 -c Debhelper -r "13.16" dh_installinit dh_installinit.1 pod2man --utf8 -c Debhelper -r "13.16" dh_installinitramfs dh_installinitramfs.1 pod2man --utf8 -c Debhelper -r "13.16" dh_installlogcheck dh_installlogcheck.1 pod2man --utf8 -c Debhelper -r "13.16" dh_installlogrotate dh_installlogrotate.1 Discard man/es/debhelper.pod (95 of 275 strings; only 34.54% translated; need 80%). pod2man --utf8 -c Debhelper -r "13.16" dh_installman dh_installman.1 Discard man/es/debhelper-compat-upgrade-checklist.pod (135 of 307 strings; only 43.97% translated; need 80%). pod2man --utf8 -c Debhelper -r "13.16" dh_installmanpages dh_installmanpages.1 pod2man --utf8 -c Debhelper -r "13.16" dh_installmenu dh_installmenu.1 Discard man/es/dh.pod (58 of 139 strings; only 41.72% translated; need 80%). pod2man --utf8 -c Debhelper -r "13.16" dh_installmime dh_installmime.1 pod2man --utf8 -c Debhelper -r "13.16" dh_installmodules dh_installmodules.1 Discard man/es/dh_clean.pod (19 of 29 strings; only 65.51% translated; need 80%). Discard man/es/dh_dwz.pod (12 of 25 strings; only 48% translated; need 80%). pod2man --utf8 -c Debhelper -r "13.16" dh_installpam dh_installpam.1 pod2man --utf8 -c Debhelper -r "13.16" dh_installppp dh_installppp.1 Discard man/es/dh_install.pod (28 of 50 strings; only 56% translated; need 80%). Discard man/es/dh_installchangelogs.pod (25 of 33 strings; only 75.75% translated; need 80%). pod2man --utf8 -c Debhelper -r "13.16" dh_installsystemd dh_installsystemd.1 Discard man/es/dh_installdeb.pod (23 of 63 strings; only 36.5% translated; need 80%). Discard man/es/dh_installdebconf.pod (28 of 53 strings; only 52.83% translated; need 80%). Discard man/es/dh_installdirs.pod (19 of 28 strings; only 67.85% translated; need 80%). pod2man --utf8 -c Debhelper -r "13.16" dh_installsystemduser dh_installsystemduser.1 Discard man/es/dh_installdocs.pod (43 of 61 strings; only 70.49% translated; need 80%). Discard man/es/dh_installexamples.pod (24 of 33 strings; only 72.72% translated; need 80%). pod2man --utf8 -c Debhelper -r "13.16" dh_installsysusers dh_installsysusers.1 Discard man/es/dh_installinit.pod (38 of 65 strings; only 58.46% translated; need 80%). Discard man/es/dh_installinitramfs.pod (10 of 21 strings; only 47.61% translated; need 80%). pod2man --utf8 -c Debhelper -r "13.16" dh_installtmpfiles dh_installtmpfiles.1 Discard man/es/dh_installman.pod (28 of 38 strings; only 73.68% translated; need 80%). pod2man --utf8 -c Debhelper -r "13.16" dh_installudev dh_installudev.1 pod2man --utf8 -c Debhelper -r "13.16" dh_installwm dh_installwm.1 Discard man/es/dh_link.pod (28 of 36 strings; only 77.77% translated; need 80%). pod2man --utf8 -c Debhelper -r "13.16" dh_installxfonts dh_installxfonts.1 Discard man/es/dh_makeshlibs.pod (32 of 61 strings; only 52.45% translated; need 80%). pod2man --utf8 -c Debhelper -r "13.16" dh_link dh_link.1 pod2man --utf8 -c Debhelper -r "13.16" dh_lintian dh_lintian.1 Discard man/es/dh_strip.pod (23 of 43 strings; only 53.48% translated; need 80%). Discard man/es/dh_testroot.pod (12 of 21 strings; only 57.14% translated; need 80%). Discard man/es/dh_systemd_enable.pod (9 of 37 strings; only 24.32% translated; need 80%). pod2man --utf8 -c Debhelper -r "13.16" dh_listpackages dh_listpackages.1 Discard man/es/dh_systemd_start.pod (11 of 25 strings; only 44% translated; need 80%). Discard man/es/strings-kept-translations.pod (0 of 2 strings; only 0% translated; need 80%). pod2man --utf8 -c Debhelper -r "13.16" dh_makeshlibs dh_makeshlibs.1 pod2man --utf8 -c Debhelper -r "13.16" dh_md5sums dh_md5sums.1 pod2man --utf8 -c Debhelper -r "13.16" dh_missing dh_missing.1 pod2man --utf8 -c Debhelper -r "13.16" dh_movefiles dh_movefiles.1 pod2man --utf8 -c Debhelper -r "13.16" dh_movetousr dh_movetousr.1 pod2man --utf8 -c Debhelper -r "13.16" dh_perl dh_perl.1 Discard man/fr/debhelper-compat-upgrade-checklist.pod (238 of 307 strings; only 77.52% translated; need 80%). Discard man/fr/dh.pod (108 of 139 strings; only 77.69% translated; need 80%). pod2man --utf8 -c Debhelper -r "13.16" dh_prep dh_prep.1 pod2man --utf8 -c Debhelper -r "13.16" dh_shlibdeps dh_shlibdeps.1 pod2man --utf8 -c Debhelper -r "13.16" dh_strip dh_strip.1 pod2man --utf8 -c Debhelper -r "13.16" dh_systemd_enable dh_systemd_enable.1 pod2man --utf8 -c Debhelper -r "13.16" dh_systemd_start dh_systemd_start.1 pod2man --utf8 -c Debhelper -r "13.16" dh_testdir dh_testdir.1 pod2man --utf8 -c Debhelper -r "13.16" dh_testroot dh_testroot.1 pod2man --utf8 -c Debhelper -r "13.16" dh_ucf dh_ucf.1 pod2man --utf8 -c Debhelper -r "13.16" dh_update_autotools_config dh_update_autotools_config.1 pod2man --utf8 -c Debhelper -r "13.16" dh_usrlocal dh_usrlocal.1 pod2man --utf8 -c Debhelper -r "13.16" dh dh.1 Discard man/ja/debhelper.pod (125 of 275 strings; only 45.45% translated; need 80%). Discard man/ja/debhelper-compat-upgrade-checklist.pod (161 of 307 strings; only 52.44% translated; need 80%). Discard man/ja/dh.pod (64 of 139 strings; only 46.04% translated; need 80%). Discard man/ja/dh_dwz.pod (13 of 25 strings; only 52% translated; need 80%). Discard man/ja/dh_install.pod (33 of 50 strings; only 66% translated; need 80%). Discard man/ja/dh_installchangelogs.pod (24 of 33 strings; only 72.72% translated; need 80%). Discard man/ja/dh_installdeb.pod (25 of 63 strings; only 39.68% translated; need 80%). Discard man/ja/dh_installdebconf.pod (27 of 53 strings; only 50.94% translated; need 80%). Discard man/ja/dh_installdirs.pod (19 of 28 strings; only 67.85% translated; need 80%). Discard man/ja/dh_installdocs.pod (39 of 61 strings; only 63.93% translated; need 80%). Discard man/ja/dh_installexamples.pod (22 of 33 strings; only 66.66% translated; need 80%). Discard man/ja/dh_installinit.pod (44 of 65 strings; only 67.69% translated; need 80%). Discard man/ja/dh_installinitramfs.pod (11 of 21 strings; only 52.38% translated; need 80%). Discard man/ja/dh_installman.pod (28 of 38 strings; only 73.68% translated; need 80%). Discard man/ja/dh_link.pod (28 of 36 strings; only 77.77% translated; need 80%). Discard man/ja/dh_makeshlibs.pod (32 of 61 strings; only 52.45% translated; need 80%). Discard man/ja/dh_testroot.pod (12 of 21 strings; only 57.14% translated; need 80%). Discard man/ja/dh_systemd_enable.pod (17 of 37 strings; only 45.94% translated; need 80%). Discard man/ja/dh_systemd_start.pod (18 of 25 strings; only 72% translated; need 80%). touch po4a-stamp set -e; \ lang=de ; \ dir=man/$lang; \ for file in $dir/dh*.pod; do \ prog=`basename $file | sed 's/.pod//'`; \ pod2man --utf8 -c Debhelper -r "13.16" $file $prog.$lang.1; \ done; \ if [ -e $dir/debhelper.pod ]; then \ cat $dir/debhelper.pod | \ perl -e ' undef $/; foreach (@ARGV) { open (IN, $_) or die "$_: $!"; $file=; close IN; if ($file=~m/=head1 .*?\n\n(.*?) - (.*?)\n\n/s) { my $item="=item $1(1)\n\n$2\n\n"; if (" dh_installmanpages " !~ / $1 /) { $list.=$item; } else { $list_deprecated.=$item; } } } END { my $recommended_compat = q{13.16}; $recommended_compat =~ s{^\d+\K(?:\D.*|\..*)?}{}; while () { s/#LIST#/$list/g; s/#LIST_DEPRECATED#/$list_deprecated/g; s/#RECOMMENDED_COMPAT#/$recommended_compat/g; print; }; }' `find $dir -type f -maxdepth 1 -name "dh_*.pod" | LC_ALL=C sort` | \ pod2man --utf8 -c Debhelper -r "13.16" --name="debhelper" --section=7 > debhelper.$lang.7; \ fi; \ if [ -e $dir/debhelper-compat-upgrade-checklist.pod ]; then \ pod2man --utf8 -c Debhelper -r "13.16" --name="debhelper" --section=7 $dir/debhelper-compat-upgrade-checklist.pod > debhelper-compat-upgrade-checklist.$lang.7; \ fi ; \ if [ -e $dir/debhelper-obsolete-compat.pod ]; then \ pod2man --utf8 -c Debhelper -r "13.16" --name="debhelper" --section=7 $dir/debhelper-obsolete-compat.pod > debhelper-obsolete-compat.$lang.7; \ fi set -e; \ lang=es ; \ dir=man/$lang; \ for file in $dir/dh*.pod; do \ prog=`basename $file | sed 's/.pod//'`; \ pod2man --utf8 -c Debhelper -r "13.16" $file $prog.$lang.1; \ done; \ if [ -e $dir/debhelper.pod ]; then \ cat $dir/debhelper.pod | \ perl -e ' undef $/; foreach (@ARGV) { open (IN, $_) or die "$_: $!"; $file=; close IN; if ($file=~m/=head1 .*?\n\n(.*?) - (.*?)\n\n/s) { my $item="=item $1(1)\n\n$2\n\n"; if (" dh_installmanpages " !~ / $1 /) { $list.=$item; } else { $list_deprecated.=$item; } } } END { my $recommended_compat = q{13.16}; $recommended_compat =~ s{^\d+\K(?:\D.*|\..*)?}{}; while () { s/#LIST#/$list/g; s/#LIST_DEPRECATED#/$list_deprecated/g; s/#RECOMMENDED_COMPAT#/$recommended_compat/g; print; }; }' `find $dir -type f -maxdepth 1 -name "dh_*.pod" | LC_ALL=C sort` | \ pod2man --utf8 -c Debhelper -r "13.16" --name="debhelper" --section=7 > debhelper.$lang.7; \ fi; \ if [ -e $dir/debhelper-compat-upgrade-checklist.pod ]; then \ pod2man --utf8 -c Debhelper -r "13.16" --name="debhelper" --section=7 $dir/debhelper-compat-upgrade-checklist.pod > debhelper-compat-upgrade-checklist.$lang.7; \ fi ; \ if [ -e $dir/debhelper-obsolete-compat.pod ]; then \ pod2man --utf8 -c Debhelper -r "13.16" --name="debhelper" --section=7 $dir/debhelper-obsolete-compat.pod > debhelper-obsolete-compat.$lang.7; \ fi set -e; \ lang=fr ; \ dir=man/$lang; \ for file in $dir/dh*.pod; do \ prog=`basename $file | sed 's/.pod//'`; \ pod2man --utf8 -c Debhelper -r "13.16" $file $prog.$lang.1; \ done; \ if [ -e $dir/debhelper.pod ]; then \ cat $dir/debhelper.pod | \ perl -e ' undef $/; foreach (@ARGV) { open (IN, $_) or die "$_: $!"; $file=; close IN; if ($file=~m/=head1 .*?\n\n(.*?) - (.*?)\n\n/s) { my $item="=item $1(1)\n\n$2\n\n"; if (" dh_installmanpages " !~ / $1 /) { $list.=$item; } else { $list_deprecated.=$item; } } } END { my $recommended_compat = q{13.16}; $recommended_compat =~ s{^\d+\K(?:\D.*|\..*)?}{}; while () { s/#LIST#/$list/g; s/#LIST_DEPRECATED#/$list_deprecated/g; s/#RECOMMENDED_COMPAT#/$recommended_compat/g; print; }; }' `find $dir -type f -maxdepth 1 -name "dh_*.pod" | LC_ALL=C sort` | \ pod2man --utf8 -c Debhelper -r "13.16" --name="debhelper" --section=7 > debhelper.$lang.7; \ fi; \ if [ -e $dir/debhelper-compat-upgrade-checklist.pod ]; then \ pod2man --utf8 -c Debhelper -r "13.16" --name="debhelper" --section=7 $dir/debhelper-compat-upgrade-checklist.pod > debhelper-compat-upgrade-checklist.$lang.7; \ fi ; \ if [ -e $dir/debhelper-obsolete-compat.pod ]; then \ pod2man --utf8 -c Debhelper -r "13.16" --name="debhelper" --section=7 $dir/debhelper-obsolete-compat.pod > debhelper-obsolete-compat.$lang.7; \ fi set -e; \ lang=ja ; \ dir=man/$lang; \ for file in $dir/dh*.pod; do \ prog=`basename $file | sed 's/.pod//'`; \ pod2man --utf8 -c Debhelper -r "13.16" $file $prog.$lang.1; \ done; \ if [ -e $dir/debhelper.pod ]; then \ cat $dir/debhelper.pod | \ perl -e ' undef $/; foreach (@ARGV) { open (IN, $_) or die "$_: $!"; $file=; close IN; if ($file=~m/=head1 .*?\n\n(.*?) - (.*?)\n\n/s) { my $item="=item $1(1)\n\n$2\n\n"; if (" dh_installmanpages " !~ / $1 /) { $list.=$item; } else { $list_deprecated.=$item; } } } END { my $recommended_compat = q{13.16}; $recommended_compat =~ s{^\d+\K(?:\D.*|\..*)?}{}; while () { s/#LIST#/$list/g; s/#LIST_DEPRECATED#/$list_deprecated/g; s/#RECOMMENDED_COMPAT#/$recommended_compat/g; print; }; }' `find $dir -type f -maxdepth 1 -name "dh_*.pod" | LC_ALL=C sort` | \ pod2man --utf8 -c Debhelper -r "13.16" --name="debhelper" --section=7 > debhelper.$lang.7; \ fi; \ if [ -e $dir/debhelper-compat-upgrade-checklist.pod ]; then \ pod2man --utf8 -c Debhelper -r "13.16" --name="debhelper" --section=7 $dir/debhelper-compat-upgrade-checklist.pod > debhelper-compat-upgrade-checklist.$lang.7; \ fi ; \ if [ -e $dir/debhelper-obsolete-compat.pod ]; then \ pod2man --utf8 -c Debhelper -r "13.16" --name="debhelper" --section=7 $dir/debhelper-obsolete-compat.pod > debhelper-obsolete-compat.$lang.7; \ fi set -e; \ lang=pt ; \ dir=man/$lang; \ for file in $dir/dh*.pod; do \ prog=`basename $file | sed 's/.pod//'`; \ pod2man --utf8 -c Debhelper -r "13.16" $file $prog.$lang.1; \ done; \ if [ -e $dir/debhelper.pod ]; then \ cat $dir/debhelper.pod | \ perl -e ' undef $/; foreach (@ARGV) { open (IN, $_) or die "$_: $!"; $file=; close IN; if ($file=~m/=head1 .*?\n\n(.*?) - (.*?)\n\n/s) { my $item="=item $1(1)\n\n$2\n\n"; if (" dh_installmanpages " !~ / $1 /) { $list.=$item; } else { $list_deprecated.=$item; } } } END { my $recommended_compat = q{13.16}; $recommended_compat =~ s{^\d+\K(?:\D.*|\..*)?}{}; while () { s/#LIST#/$list/g; s/#LIST_DEPRECATED#/$list_deprecated/g; s/#RECOMMENDED_COMPAT#/$recommended_compat/g; print; }; }' `find $dir -type f -maxdepth 1 -name "dh_*.pod" | LC_ALL=C sort` | \ pod2man --utf8 -c Debhelper -r "13.16" --name="debhelper" --section=7 > debhelper.$lang.7; \ fi; \ if [ -e $dir/debhelper-compat-upgrade-checklist.pod ]; then \ pod2man --utf8 -c Debhelper -r "13.16" --name="debhelper" --section=7 $dir/debhelper-compat-upgrade-checklist.pod > debhelper-compat-upgrade-checklist.$lang.7; \ fi ; \ if [ -e $dir/debhelper-obsolete-compat.pod ]; then \ pod2man --utf8 -c Debhelper -r "13.16" --name="debhelper" --section=7 $dir/debhelper-obsolete-compat.pod > debhelper-obsolete-compat.$lang.7; \ fi touch translated-es-stamp touch translated-ja-stamp touch translated-de-stamp touch translated-fr-stamp touch translated-pt-stamp make[1]: Leaving directory '/build/reproducible-path/debhelper-13.16' dh_auto_test make -j12 test make[1]: Entering directory '/build/reproducible-path/debhelper-13.16' printf "package Debian::Debhelper::Dh_Version;\n\$version='13.16';\n1" > \ lib/Debian/Debhelper/Dh_Version.pm MAKEFLAGS= prove -lrj12 --timer t [06:47:46] t/Dh_Lib/path.t ...................................... ok 299 ms ( 0.01 usr 0.01 sys + 0.08 cusr 0.00 csys = 0.10 CPU) [06:47:46] t/Dh_Lib/00-use.t .................................... ok 364 ms ( 0.02 usr 0.01 sys + 0.16 cusr 0.01 csys = 0.20 CPU) [06:47:46] t/Dh_Lib/control-parsing.t ........................... ok 372 ms ( 0.02 usr 0.01 sys + 0.25 cusr 0.02 csys = 0.30 CPU) [06:47:46] t/buildsystems/01-build-system-basic-api.t ........... ok 364 ms ( 0.02 usr 0.02 sys + 0.34 cusr 0.02 csys = 0.40 CPU) [06:47:46] t/buildsystems/02-make-jobserver-makeflags.t ......... ok 368 ms ( 0.02 usr 0.02 sys + 0.43 cusr 0.03 csys = 0.50 CPU) [06:47:46] t/buildsystems/06-buildsystem-mkdir-rmdir.t .......... ok 443 ms ( 0.02 usr 0.02 sys + 0.51 cusr 0.06 csys = 0.61 CPU) [06:47:47] t/buildsystems/03-bs-auto-buildable.t ................ ok 578 ms ( 0.04 usr 0.03 sys + 0.69 cusr 0.07 csys = 0.83 CPU) [06:47:47] t/dh-sequencer.t ..................................... ok 336 ms ( 0.02 usr 0.02 sys + 0.68 cusr 0.09 csys = 0.81 CPU) [06:47:47] t/debhelper-compat/syntax.t .......................... ok 731 ms ( 0.05 usr 0.02 sys + 0.93 cusr 0.11 csys = 1.11 CPU) [06:47:47] t/buildsystems/05-load-build-system.t ................ ok 828 ms ( 0.05 usr 0.03 sys + 1.13 cusr 0.15 csys = 1.36 CPU) [06:47:47] t/dh-lib.t ........................................... ok 1246 ms ( 0.06 usr 0.02 sys + 1.29 cusr 0.19 csys = 1.56 CPU) [06:47:48] t/dh_install/03-866570-dont-install-from-host.t ...... ok 1831 ms ( 0.05 usr 0.03 sys + 1.22 cusr 0.26 csys = 1.56 CPU) [06:47:48] t/dh_installdocs/01-868204-ignore-broken-symlinks.t .. ok 1659 ms ( 0.03 usr 0.02 sys + 1.26 cusr 0.27 csys = 1.58 CPU) [06:47:49] t/dh_installman/01-basics.t .......................... skipped: Test requires man or man-recode [06:47:49] t/buildsystems/04-dh_auto_do_autoconf.t .............. ok 2696 ms ( 0.07 usr 0.06 sys + 2.73 cusr 0.44 csys = 3.30 CPU) [06:47:49] t/dh_install/01-basics.t ............................. ok 3068 ms ( 0.07 usr 0.05 sys + 3.18 cusr 0.52 csys = 3.82 CPU) [06:47:50] t/dh_installgsettings/dh_installgsettings.t .......... ok 3050 ms ( 0.04 usr 0.04 sys + 2.98 cusr 0.52 csys = 3.58 CPU) [06:47:51] t/dh_install/04-sourcedir.t .......................... ok 4759 ms ( 0.10 usr 0.05 sys + 4.73 cusr 0.83 csys = 5.71 CPU) [06:47:52] t/dh_installpam/dh_installpam.t ...................... ok 3582 ms ( 0.07 usr 0.02 sys + 3.90 cusr 0.64 csys = 4.63 CPU) [06:47:52] t/dh_install/02-bugs-53XXXX.t ........................ ok 6135 ms ( 0.15 usr 0.05 sys + 7.00 cusr 1.20 csys = 8.40 CPU) [06:47:53] t/dh_installsystemd/dh_installsystemd_tmpfiles.t ..... ok 3955 ms ( 0.10 usr 0.01 sys + 5.49 cusr 0.89 csys = 6.49 CPU) [06:47:53] t/dh_link/03-894229.t ................................ ok 451 ms ( 0.02 usr 0.00 sys + 0.98 cusr 0.13 csys = 1.13 CPU) [06:47:54] t/dh_installsystemd/dh_systemd.t ..................... ok 4839 ms ( 0.12 usr 0.02 sys + 5.94 cusr 0.99 csys = 7.07 CPU) [06:47:55] t/dh_installinit/dh_installinit.t .................... ok 7653 ms ( 0.15 usr 0.05 sys + 9.64 cusr 1.60 csys = 11.44 CPU) [06:47:55] t/dh_installdocs/dh_installdocs.t .................... ok 8476 ms ( 0.17 usr 0.06 sys + 11.94 cusr 2.05 csys = 14.22 CPU) [06:47:57] t/dh_missing/03-dh_install-redirection.t ............. ok 2350 ms ( 0.06 usr 0.00 sys + 4.09 cusr 0.68 csys = 4.83 CPU) [06:47:57] t/dh_link/02-346405.t ................................ ok 5423 ms ( 0.13 usr 0.03 sys + 8.85 cusr 1.45 csys = 10.46 CPU) [06:47:58] t/dh_compress.t ...................................... ok 11288 ms ( 0.27 usr 0.09 sys + 16.48 cusr 2.74 csys = 19.58 CPU) [06:47:58] t/dh_missing/01-no-missing.t ......................... ok 5148 ms ( 0.12 usr 0.03 sys + 9.55 cusr 1.62 csys = 11.32 CPU) [06:47:58] t/override_target.t .................................. ok 463 ms ( 0.01 usr 0.00 sys + 1.25 cusr 0.21 csys = 1.47 CPU) [06:47:58] t/pod.t .............................................. skipped: Test::Pod required [06:47:58] t/size.t ............................................. ok 267 ms ( 0.01 usr 0.00 sys + 0.10 cusr 0.03 csys = 0.14 CPU) [06:47:59] t/dh_missing/02-fail-on-missing.t .................... ok 5583 ms ( 0.15 usr 0.03 sys + 10.85 cusr 1.80 csys = 12.83 CPU) [06:47:59] t/dh_missing/04-not-installed-glob.t ................. ok 3947 ms ( 0.12 usr 0.01 sys + 9.05 cusr 1.49 csys = 10.67 CPU) [06:47:59] t/dh_installsystemduser/dh_installsystemduser.t ...... ok 9227 ms ( 0.25 usr 0.04 sys + 17.92 cusr 2.89 csys = 21.10 CPU) [06:47:59] t/dh_link/01-basic.t ................................. ok 8059 ms ( 0.22 usr 0.04 sys + 18.70 cusr 3.03 csys = 21.99 CPU) [06:48:00] t/buildsystems/buildsystem_tests.t ................... ok 13785 ms ( 0.35 usr 0.10 sys + 25.02 cusr 4.07 csys = 29.54 CPU) [06:48:01] t/dh_movetousr/dh_movetousr.t ........................ ok 5907 ms ( 0.16 usr 0.02 sys + 13.72 cusr 2.17 csys = 16.07 CPU) [06:48:01] t/syntax/syntax-libs.t ............................... ok 3205 ms ( 0.08 usr 0.01 sys + 9.45 cusr 1.49 csys = 11.03 CPU) [06:48:04] t/maintscript.t ...................................... ok 6638 ms ( 0.14 usr 0.01 sys + 14.15 cusr 2.26 csys = 16.56 CPU) [06:48:05] t/syntax/syntax-progs.t .............................. ok 6964 ms ( 0.12 usr 0.01 sys + 12.79 cusr 2.03 csys = 14.95 CPU) [06:48:07] t/dh_usrlocal/01-basic.t ............................. ok 10207 ms ( 0.19 usr 0.02 sys + 19.27 cusr 3.12 csys = 22.60 CPU) [06:48:08] t/dh_installchangelogs/dh_installchangelogs.t ........ ok 21365 ms ( 0.43 usr 0.08 sys + 37.60 cusr 6.54 csys = 44.65 CPU) [06:48:36] t/dh_installsystemd/dh_installsystemd.t .............. ok 47163 ms ( 0.57 usr 0.06 sys + 49.20 cusr 9.19 csys = 59.02 CPU) [06:48:36] All tests successful. Files=44, Tests=690, 50 wallclock secs ( 0.66 usr 0.13 sys + 51.31 cusr 9.56 csys = 61.66 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/debhelper-13.16' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install make -j12 install DESTDIR=/build/reproducible-path/debhelper-13.16/debian/tmp AM_UPDATE_INFO_DIR=no "INSTALL=install --strip-program=true" make[1]: Entering directory '/build/reproducible-path/debhelper-13.16' install -d /build/reproducible-path/debhelper-13.16/debian/tmp/usr/bin \ /build/reproducible-path/debhelper-13.16/debian/tmp/usr/share/debhelper/autoscripts \ /build/reproducible-path/debhelper-13.16/debian/tmp/usr/share/perl5/Debian/Debhelper/Sequence \ /build/reproducible-path/debhelper-13.16/debian/tmp/usr/share/perl5/Debian/Debhelper/Buildsystem \ /build/reproducible-path/debhelper-13.16/debian/tmp/usr/share/perl5/Debian/Debhelper/DH install dh dh_assistant dh_auto_build dh_auto_clean dh_auto_configure dh_auto_install dh_auto_test dh_bugfiles dh_builddeb dh_clean dh_compress dh_dwz dh_fixperms dh_gencontrol dh_icons dh_install dh_installalternatives dh_installcatalogs dh_installchangelogs dh_installcron dh_installdeb dh_installdebconf dh_installdirs dh_installdocs dh_installemacsen dh_installexamples dh_installgsettings dh_installifupdown dh_installinfo dh_installinit dh_installinitramfs dh_installlogcheck dh_installlogrotate dh_installman dh_installmanpages dh_installmenu dh_installmime dh_installmodules dh_installpam dh_installppp dh_installsystemd dh_installsystemduser dh_installsysusers dh_installtmpfiles dh_installudev dh_installwm dh_installxfonts dh_link dh_lintian dh_listpackages dh_makeshlibs dh_md5sums dh_missing dh_movefiles dh_movetousr dh_perl dh_prep dh_shlibdeps dh_strip dh_systemd_enable dh_systemd_start dh_testdir dh_testroot dh_ucf dh_update_autotools_config dh_usrlocal /build/reproducible-path/debhelper-13.16/debian/tmp/usr/bin install -m 0644 autoscripts/* /build/reproducible-path/debhelper-13.16/debian/tmp/usr/share/debhelper/autoscripts install -m 0644 lib/Debian/Debhelper/*.pm /build/reproducible-path/debhelper-13.16/debian/tmp/usr/share/perl5/Debian/Debhelper [ "/usr" = /usr ] || \ sed -i '/$prefix=/s@/usr@/usr@g' /build/reproducible-path/debhelper-13.16/debian/tmp/usr/share/perl5/Debian/Debhelper/Dh_Lib.pm if [ "13.16" ]; then \ MV=$(echo "13.16" | perl -ne 'print $1 if /^(\d+)[~.]/;') ; \ sed -i "/constant HIGHEST_STABLE_COMPAT_LEVEL =>/s@=>.*;@=> ${MV};@g" /build/reproducible-path/debhelper-13.16/debian/tmp/usr/share/perl5/Debian/Debhelper/Dh_Lib.pm ; \ fi install -m 0644 lib/Debian/Debhelper/Sequence/*.pm /build/reproducible-path/debhelper-13.16/debian/tmp/usr/share/perl5/Debian/Debhelper/Sequence install -m 0644 lib/Debian/Debhelper/Buildsystem/*.pm /build/reproducible-path/debhelper-13.16/debian/tmp/usr/share/perl5/Debian/Debhelper/Buildsystem install -m 0644 lib/Debian/Debhelper/DH/*.pm /build/reproducible-path/debhelper-13.16/debian/tmp/usr/share/perl5/Debian/Debhelper/DH make[1]: Leaving directory '/build/reproducible-path/debhelper-13.16' debian/rules execute_before_dh_install make[1]: Entering directory '/build/reproducible-path/debhelper-13.16' PERLLIBDIR=$(perl -MConfig -e 'print $Config{vendorlib}')/ ; \ perl -I"debian/tmp/${PERLLIBDIR}" debian/gen-provides > debian/debhelper.substvars make[1]: Leaving directory '/build/reproducible-path/debhelper-13.16' dh_install dh_installdocs dh_installchangelogs dh_installexamples dh_installman dh_installman: warning: man is not available. Skipping re-encode of UTF-8 manpages dh_perl dh_link dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'debhelper' in '../debhelper_13.16_all.deb'. dpkg-deb: building package 'libdebhelper-perl' in '../libdebhelper-perl_13.16_all.deb'. dpkg-genbuildinfo --build=binary -O../debhelper_13.16_arm64.buildinfo dpkg-genchanges --build=binary -O../debhelper_13.16_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-source: info: using options from debhelper-13.16/debian/source/options: --tar-ignore --tar-ignore=debhelper/.idea dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: including full source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/2467133 and its subdirectories I: Current time: Sun Jul 20 18:48:40 -12 2025 I: pbuilder-time-stamp: 1753080520 Tue Jun 18 00:25:42 UTC 2024 I: 1st build successful. Starting 2nd build on remote node codethink04-arm64.debian.net. Tue Jun 18 00:25:42 UTC 2024 I: Preparing to do remote build '2' on codethink04-arm64.debian.net. Tue Jun 18 00:27:37 UTC 2024 I: Deleting $TMPDIR on codethink04-arm64.debian.net. Tue Jun 18 00:27:38 UTC 2024 I: debhelper_13.16_arm64.changes: Format: 1.8 Date: Mon, 17 Jun 2024 16:00:40 +0000 Source: debhelper Binary: debhelper libdebhelper-perl Architecture: all Version: 13.16 Distribution: unstable Urgency: medium Maintainer: Debhelper Maintainers Changed-By: Niels Thykier Description: debhelper - helper programs for debian/rules libdebhelper-perl - debhelper perl modules Closes: 1069176 Changes: debhelper (13.16) unstable; urgency=medium . [ Niels Thykier ] * dh_assistant: Clearly mark unsafe commands * d/changelog: Fix typos in historical entries * Migrate to `X-Style: black` * dh_assistant.1: Improve documentation and command tagging * Improve wording of several man pages. Thanks to Christoph Brinkhaus (Closes: #1069176) * Require a package prefix with `--name` in c15 (warning in c14) * dh_assistant: Report data about disabled commands in some subcommands. This breaks a small subset of the `dh-debputy` features and a related `Breaks` has been added. . [ Peter Pentchev ] * Fix a "comat" -> "compat" typo in _load_compat_info() . [ Luca Boccassi ] * dh_installtmpfiles: implement remove on removal, purge on purge . [ Christoph Brinkhaus ] * Update German translation of man pages (Closes: #1069176) Checksums-Sha1: a4cde8f4cf9ab65a80b181b83349ea701788cd0a 891300 debhelper_13.16_all.deb 9a35181985a4dbc1beb792b5687314ac1608207d 4394 debhelper_13.16_arm64.buildinfo f0296b71234e05e5e654760ecf4589738c1f12bb 88640 libdebhelper-perl_13.16_all.deb Checksums-Sha256: 690f9c1753149ca9bcdb8de92bfa4da4d6826953166c076bb0e55c674c566b6e 891300 debhelper_13.16_all.deb a00b3599c4ce629f2f955e14ef7031526ed9767fb35fc6b33f27ba39d46edc7e 4394 debhelper_13.16_arm64.buildinfo 9207a7248398301031c566e56b08f86336f38296c34944f0d10d6027b6d53276 88640 libdebhelper-perl_13.16_all.deb Files: 2240708fd146bb180d9e4d3a456147ac 891300 devel optional debhelper_13.16_all.deb 83bec398d090b0c55feb3cba61d00864 4394 devel optional debhelper_13.16_arm64.buildinfo f86d2b5988bb0562ff246207493dedbf 88640 perl optional libdebhelper-perl_13.16_all.deb Tue Jun 18 00:27:39 UTC 2024 I: diffoscope 271 will be used to compare the two builds: Running as unit: rb-diffoscope-arm64_23-46363.service # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.UgLagQeN/debhelper_13.16.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.UgLagQeN/debhelper_13.16.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.UgLagQeN/debhelper_13.16.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.UgLagQeN/b1/debhelper_13.16_arm64.changes /srv/reproducible-results/rbuild-debian/r-b-build.UgLagQeN/b2/debhelper_13.16_arm64.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.364s) 0.364s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.028s) 0.028s 12 calls diffoscope.comparators.binary.FilesystemFile ## specialize (total time: 0.000s) 0.000s 1 call specialize Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 690ms CPU time consumed: 691ms Tue Jun 18 00:27:40 UTC 2024 I: diffoscope 271 found no differences in the changes files, and a .buildinfo file also exists. Tue Jun 18 00:27:40 UTC 2024 I: debhelper from unstable built successfully and reproducibly on arm64. Tue Jun 18 00:27:41 UTC 2024 I: Submitting .buildinfo files to external archives: Tue Jun 18 00:27:41 UTC 2024 I: Submitting 8.0K b1/debhelper_13.16_arm64.buildinfo.asc Tue Jun 18 00:27:42 UTC 2024 I: Submitting 8.0K b2/debhelper_13.16_arm64.buildinfo.asc Tue Jun 18 00:27:43 UTC 2024 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Tue Jun 18 00:27:43 UTC 2024 I: Done submitting .buildinfo files. Tue Jun 18 00:27:43 UTC 2024 I: Removing signed debhelper_13.16_arm64.buildinfo.asc files: removed './b1/debhelper_13.16_arm64.buildinfo.asc' removed './b2/debhelper_13.16_arm64.buildinfo.asc'