Thu Oct 31 11:42:55 UTC 2024 I: starting to build nwipe/trixie/i386 on jenkins on '2024-10-31 11:42' Thu Oct 31 11:42:55 UTC 2024 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/i386_20/30754/console.log Thu Oct 31 11:42:55 UTC 2024 I: Downloading source for trixie/nwipe=0.37-1 --2024-10-31 11:42:55-- http://deb.debian.org/debian/pool/main/n/nwipe/nwipe_0.37-1.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 1884 (1.8K) [text/prs.lines.tag] Saving to: ‘nwipe_0.37-1.dsc’ 0K . 100% 214M=0s 2024-10-31 11:42:55 (214 MB/s) - ‘nwipe_0.37-1.dsc’ saved [1884/1884] Thu Oct 31 11:42:55 UTC 2024 I: nwipe_0.37-1.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: nwipe Binary: nwipe Architecture: any Version: 0.37-1 Maintainer: Martijn van Brummelen Homepage: https://github.com/martijnvanbrummelen/nwipe Standards-Version: 4.7.0 Vcs-Browser: https://salsa.debian.org/mvb/nwipe Vcs-Git: https://salsa.debian.org/mvb/nwipe.git Build-Depends: debhelper-compat (= 13), libparted-dev, libncurses-dev, dpkg-dev (>= 1.16.1~), libconfig-dev Package-List: nwipe deb utils optional arch=any Checksums-Sha1: 4e672dd0baa565132613033b67f942ba267ee6ef 7294007 nwipe_0.37.orig.tar.gz 0f953ec5dde087567d73c41f4ed34406ac49d0b3 3648 nwipe_0.37-1.debian.tar.xz Checksums-Sha256: a548bd097da491990d1b0db3fe0ed849340d89281badb46800d3a85ba7df89e0 7294007 nwipe_0.37.orig.tar.gz e46985dfe3974fef245040be80f7383d9a37485bb6a1648ff38113a0be794722 3648 nwipe_0.37-1.debian.tar.xz Files: 5185c85381b682b4c15317e706b75e33 7294007 nwipe_0.37.orig.tar.gz 90c04bb40420438a6233944132de3f99 3648 nwipe_0.37-1.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQJDBAEBCgAtFiEEmODReNy5DBlFxQ2x7Q3TNo3kCSQFAmZBxicPHG12YkBkZWJp YW4ub3JnAAoJEO0N0zaN5AkkdYsP/RueYoo/ZrPVt+H/LGzkm0Wpnz3L8Kbd9Cev TF710Ig01UWxKAy0PB6Ls3VQpnQSX+nBYc1v+MsIrqOeDa+Te+G/ERfMo/8GBzk8 kQAjkYzY6d8H6INJiQqPjg0rCpRXZu6iScMV7OqP5f8WMVIdO0mmy1wI6dutGKnp n2jgvUgQbRbchYQzN7nBoMLnwE6Oau6lXmCzkSXOAHH7lapNawdelkA6AieJPrM6 NKVPl3afkzuJ91PNLhEhg2dWfW49+Pf/xa45eI6IW+2tsqezsjeRRd4o/CsRhdQr ajcXd4bdX3CPQWAmNPWzZSg5pcuuahz/Sw4A8naOZ3yC+klaHer1XsIpBsN/9dRx 8+AlHz/HcMrK5C/mj97T6BCGz5lkvcBbA6EEHcInPM61SZiKoIcedlXjiY1j2NM4 O/r8GkTvj5PPwC6jUWNrTVy/EgdPC40XUox8Ep9StSD13CQSRDGQRXtKUNFSFNBR psh7iN6AfSTJl9IcOBkyUINtNh6ckUIYEevjnoNhXT7ZqT3/JG/nVr42HVbMz/QF w7erfkOW8zKTNVlezNdog8Ntd8X23hxs41r9xU9e4418TckXiVaKz7h3gXm2sX7p MHpuNR0wcx67AvGA1OQxsb5HRIEDxYizZQCx2SkZ54/NvtIO/61uP6/ZxXcg2rdm Hea0djJO =RFDL -----END PGP SIGNATURE----- Thu Oct 31 11:42:55 UTC 2024 I: Checking whether the package is not for us Thu Oct 31 11:42:55 UTC 2024 I: Starting 1st build on remote node infom08-i386.debian.net. Thu Oct 31 11:42:55 UTC 2024 I: Preparing to do remote build '1' on infom08-i386.debian.net. Thu Oct 31 11:43:23 UTC 2024 I: Deleting $TMPDIR on infom08-i386.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Wed Dec 3 06:05:56 -12 2025 I: pbuilder-time-stamp: 1764785156 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: using eatmydata during job I: Copying source file I: copying [nwipe_0.37-1.dsc] I: copying [./nwipe_0.37.orig.tar.gz] I: copying [./nwipe_0.37-1.debian.tar.xz] I: Extracting source gpgv: Signature made Mon May 13 07:49:59 2024 gpgv: using RSA key 98E0D178DCB90C1945C50DB1ED0DD3368DE40924 gpgv: issuer "mvb@debian.org" gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./nwipe_0.37-1.dsc: no acceptable signature found dpkg-source: info: extracting nwipe in nwipe-0.37 dpkg-source: info: unpacking nwipe_0.37.orig.tar.gz dpkg-source: info: unpacking nwipe_0.37-1.debian.tar.xz I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/13889/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='i386' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=6 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='i386' IFS=' ' INVOCATION_ID='10ed1657737146df8ba41bac1e765e48' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' LD_LIBRARY_PATH='/usr/lib/libeatmydata' LD_PRELOAD='libeatmydata.so' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='13889' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.3vep6tqS/pbuilderrc_fwXC --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.3vep6tqS/b1 --logfile b1/build.log nwipe_0.37-1.dsc' SUDO_GID='111' SUDO_UID='104' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' I: uname -a Linux infom08-i386 6.10.11+bpo-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.10.11-1~bpo12+1 (2024-10-03) x86_64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Aug 4 2024 /bin -> usr/bin I: user script /srv/workspace/pbuilder/13889/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: i386 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), libparted-dev, libncurses-dev, dpkg-dev (>= 1.16.1~), libconfig-dev dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19956 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libparted-dev; however: Package libparted-dev is not installed. pbuilder-satisfydepends-dummy depends on libncurses-dev; however: Package libncurses-dev is not installed. pbuilder-satisfydepends-dummy depends on libconfig-dev; however: Package libconfig-dev is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dmidecode{a} dmsetup{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libblkid-dev{a} libconfig-dev{a} libconfig9{a} libdebhelper-perl{a} libdevmapper-dev{a} libdevmapper-event1.02.1{a} libdevmapper1.02.1{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libicu72{a} libmagic-mgc{a} libmagic1t64{a} libncurses-dev{a} libncurses6{a} libparted-dev{a} libparted-fs-resize0t64{a} libparted2t64{a} libpcre2-16-0{a} libpcre2-32-0{a} libpcre2-dev{a} libpcre2-posix3{a} libpipeline1{a} libpkgconf3{a} libselinux1-dev{a} libsepol-dev{a} libtool{a} libuchardet0{a} libudev-dev{a} libxml2{a} m4{a} man-db{a} pkg-config{a} pkgconf{a} pkgconf-bin{a} po-debconf{a} sensible-utils{a} uuid-dev{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libconfig-doc libgpm2 libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 54 newly installed, 0 to remove and 0 not upgraded. Need to get 24.1 MB of archives. After unpacking 89.9 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main i386 dmidecode i386 3.6-1 [65.8 kB] Get: 2 http://deb.debian.org/debian trixie/main i386 sensible-utils all 0.0.24 [24.8 kB] Get: 3 http://deb.debian.org/debian trixie/main i386 libmagic-mgc i386 1:5.45-3+b1 [314 kB] Get: 4 http://deb.debian.org/debian trixie/main i386 libmagic1t64 i386 1:5.45-3+b1 [115 kB] Get: 5 http://deb.debian.org/debian trixie/main i386 file i386 1:5.45-3+b1 [43.2 kB] Get: 6 http://deb.debian.org/debian trixie/main i386 gettext-base i386 0.22.5-2 [201 kB] Get: 7 http://deb.debian.org/debian trixie/main i386 libuchardet0 i386 0.0.8-1+b2 [69.2 kB] Get: 8 http://deb.debian.org/debian trixie/main i386 groff-base i386 1.23.0-5 [1196 kB] Get: 9 http://deb.debian.org/debian trixie/main i386 bsdextrautils i386 2.40.2-9 [102 kB] Get: 10 http://deb.debian.org/debian trixie/main i386 libpipeline1 i386 1.5.8-1 [41.2 kB] Get: 11 http://deb.debian.org/debian trixie/main i386 man-db i386 2.13.0-1 [1428 kB] Get: 12 http://deb.debian.org/debian trixie/main i386 m4 i386 1.4.19-4 [293 kB] Get: 13 http://deb.debian.org/debian trixie/main i386 autoconf all 2.72-3 [493 kB] Get: 14 http://deb.debian.org/debian trixie/main i386 autotools-dev all 20220109.1 [51.6 kB] Get: 15 http://deb.debian.org/debian trixie/main i386 automake all 1:1.16.5-1.3 [823 kB] Get: 16 http://deb.debian.org/debian trixie/main i386 autopoint all 0.22.5-2 [723 kB] Get: 17 http://deb.debian.org/debian trixie/main i386 libdebhelper-perl all 13.20 [89.7 kB] Get: 18 http://deb.debian.org/debian trixie/main i386 libtool all 2.4.7-7 [517 kB] Get: 19 http://deb.debian.org/debian trixie/main i386 dh-autoreconf all 20 [17.1 kB] Get: 20 http://deb.debian.org/debian trixie/main i386 libarchive-zip-perl all 1.68-1 [104 kB] Get: 21 http://deb.debian.org/debian trixie/main i386 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get: 22 http://deb.debian.org/debian trixie/main i386 dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get: 23 http://deb.debian.org/debian trixie/main i386 libelf1t64 i386 0.192-4 [195 kB] Get: 24 http://deb.debian.org/debian trixie/main i386 dwz i386 0.15-1+b1 [116 kB] Get: 25 http://deb.debian.org/debian trixie/main i386 libicu72 i386 72.1-5+b1 [9583 kB] Get: 26 http://deb.debian.org/debian trixie/main i386 libxml2 i386 2.12.7+dfsg+really2.9.14-0.1 [733 kB] Get: 27 http://deb.debian.org/debian trixie/main i386 gettext i386 0.22.5-2 [1631 kB] Get: 28 http://deb.debian.org/debian trixie/main i386 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 29 http://deb.debian.org/debian trixie/main i386 po-debconf all 1.0.21+nmu1 [248 kB] Get: 30 http://deb.debian.org/debian trixie/main i386 debhelper all 13.20 [915 kB] Get: 31 http://deb.debian.org/debian trixie/main i386 libdevmapper1.02.1 i386 2:1.02.196-1+b1 [128 kB] Get: 32 http://deb.debian.org/debian trixie/main i386 dmsetup i386 2:1.02.196-1+b1 [77.8 kB] Get: 33 http://deb.debian.org/debian trixie/main i386 uuid-dev i386 2.40.2-9 [47.3 kB] Get: 34 http://deb.debian.org/debian trixie/main i386 libblkid-dev i386 2.40.2-9 [227 kB] Get: 35 http://deb.debian.org/debian trixie/main i386 libconfig9 i386 1.5-0.4+b2 [31.2 kB] Get: 36 http://deb.debian.org/debian trixie/main i386 libpkgconf3 i386 1.8.1-4 [38.4 kB] Get: 37 http://deb.debian.org/debian trixie/main i386 pkgconf-bin i386 1.8.1-4 [30.6 kB] Get: 38 http://deb.debian.org/debian trixie/main i386 pkgconf i386 1.8.1-4 [26.2 kB] Get: 39 http://deb.debian.org/debian trixie/main i386 pkg-config i386 1.8.1-4 [14.0 kB] Get: 40 http://deb.debian.org/debian trixie/main i386 libconfig-dev i386 1.5-0.4+b2 [63.0 kB] Get: 41 http://deb.debian.org/debian trixie/main i386 libdevmapper-event1.02.1 i386 2:1.02.196-1+b1 [12.7 kB] Get: 42 http://deb.debian.org/debian trixie/main i386 libudev-dev i386 256.7-2 [69.0 kB] Get: 43 http://deb.debian.org/debian trixie/main i386 libsepol-dev i386 3.7-1 [405 kB] Get: 44 http://deb.debian.org/debian trixie/main i386 libpcre2-16-0 i386 10.42-4+b2 [249 kB] Get: 45 http://deb.debian.org/debian trixie/main i386 libpcre2-32-0 i386 10.42-4+b2 [237 kB] Get: 46 http://deb.debian.org/debian trixie/main i386 libpcre2-posix3 i386 10.42-4+b2 [55.8 kB] Get: 47 http://deb.debian.org/debian trixie/main i386 libpcre2-dev i386 10.42-4+b2 [770 kB] Get: 48 http://deb.debian.org/debian trixie/main i386 libselinux1-dev i386 3.7-3 [168 kB] Get: 49 http://deb.debian.org/debian trixie/main i386 libdevmapper-dev i386 2:1.02.196-1+b1 [42.4 kB] Get: 50 http://deb.debian.org/debian trixie/main i386 libncurses6 i386 6.5-2+b1 [112 kB] Get: 51 http://deb.debian.org/debian trixie/main i386 libncurses-dev i386 6.5-2+b1 [505 kB] Get: 52 http://deb.debian.org/debian trixie/main i386 libparted2t64 i386 3.6-4+b1 [323 kB] Get: 53 http://deb.debian.org/debian trixie/main i386 libparted-fs-resize0t64 i386 3.6-4+b1 [47.2 kB] Get: 54 http://deb.debian.org/debian trixie/main i386 libparted-dev i386 3.6-4+b1 [227 kB] Fetched 24.1 MB in 2s (11.3 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package dmidecode. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19956 files and directories currently installed.) Preparing to unpack .../00-dmidecode_3.6-1_i386.deb ... Unpacking dmidecode (3.6-1) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../01-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../02-libmagic-mgc_1%3a5.45-3+b1_i386.deb ... Unpacking libmagic-mgc (1:5.45-3+b1) ... Selecting previously unselected package libmagic1t64:i386. Preparing to unpack .../03-libmagic1t64_1%3a5.45-3+b1_i386.deb ... Unpacking libmagic1t64:i386 (1:5.45-3+b1) ... Selecting previously unselected package file. Preparing to unpack .../04-file_1%3a5.45-3+b1_i386.deb ... Unpacking file (1:5.45-3+b1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../05-gettext-base_0.22.5-2_i386.deb ... Unpacking gettext-base (0.22.5-2) ... Selecting previously unselected package libuchardet0:i386. Preparing to unpack .../06-libuchardet0_0.0.8-1+b2_i386.deb ... Unpacking libuchardet0:i386 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../07-groff-base_1.23.0-5_i386.deb ... Unpacking groff-base (1.23.0-5) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../08-bsdextrautils_2.40.2-9_i386.deb ... Unpacking bsdextrautils (2.40.2-9) ... Selecting previously unselected package libpipeline1:i386. Preparing to unpack .../09-libpipeline1_1.5.8-1_i386.deb ... Unpacking libpipeline1:i386 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../10-man-db_2.13.0-1_i386.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../11-m4_1.4.19-4_i386.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../12-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../13-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../14-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../15-autopoint_0.22.5-2_all.deb ... Unpacking autopoint (0.22.5-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../16-libdebhelper-perl_13.20_all.deb ... Unpacking libdebhelper-perl (13.20) ... Selecting previously unselected package libtool. Preparing to unpack .../17-libtool_2.4.7-7_all.deb ... Unpacking libtool (2.4.7-7) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../18-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../19-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../20-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../21-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:i386. Preparing to unpack .../22-libelf1t64_0.192-4_i386.deb ... Unpacking libelf1t64:i386 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../23-dwz_0.15-1+b1_i386.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libicu72:i386. Preparing to unpack .../24-libicu72_72.1-5+b1_i386.deb ... Unpacking libicu72:i386 (72.1-5+b1) ... Selecting previously unselected package libxml2:i386. Preparing to unpack .../25-libxml2_2.12.7+dfsg+really2.9.14-0.1_i386.deb ... Unpacking libxml2:i386 (2.12.7+dfsg+really2.9.14-0.1) ... Selecting previously unselected package gettext. Preparing to unpack .../26-gettext_0.22.5-2_i386.deb ... Unpacking gettext (0.22.5-2) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../27-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../28-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../29-debhelper_13.20_all.deb ... Unpacking debhelper (13.20) ... Selecting previously unselected package libdevmapper1.02.1:i386. Preparing to unpack .../30-libdevmapper1.02.1_2%3a1.02.196-1+b1_i386.deb ... Unpacking libdevmapper1.02.1:i386 (2:1.02.196-1+b1) ... Selecting previously unselected package dmsetup. Preparing to unpack .../31-dmsetup_2%3a1.02.196-1+b1_i386.deb ... Unpacking dmsetup (2:1.02.196-1+b1) ... Selecting previously unselected package uuid-dev:i386. Preparing to unpack .../32-uuid-dev_2.40.2-9_i386.deb ... Unpacking uuid-dev:i386 (2.40.2-9) ... Selecting previously unselected package libblkid-dev:i386. Preparing to unpack .../33-libblkid-dev_2.40.2-9_i386.deb ... Unpacking libblkid-dev:i386 (2.40.2-9) ... Selecting previously unselected package libconfig9:i386. Preparing to unpack .../34-libconfig9_1.5-0.4+b2_i386.deb ... Unpacking libconfig9:i386 (1.5-0.4+b2) ... Selecting previously unselected package libpkgconf3:i386. Preparing to unpack .../35-libpkgconf3_1.8.1-4_i386.deb ... Unpacking libpkgconf3:i386 (1.8.1-4) ... Selecting previously unselected package pkgconf-bin. Preparing to unpack .../36-pkgconf-bin_1.8.1-4_i386.deb ... Unpacking pkgconf-bin (1.8.1-4) ... Selecting previously unselected package pkgconf:i386. Preparing to unpack .../37-pkgconf_1.8.1-4_i386.deb ... Unpacking pkgconf:i386 (1.8.1-4) ... Selecting previously unselected package pkg-config:i386. Preparing to unpack .../38-pkg-config_1.8.1-4_i386.deb ... Unpacking pkg-config:i386 (1.8.1-4) ... Selecting previously unselected package libconfig-dev:i386. Preparing to unpack .../39-libconfig-dev_1.5-0.4+b2_i386.deb ... Unpacking libconfig-dev:i386 (1.5-0.4+b2) ... Selecting previously unselected package libdevmapper-event1.02.1:i386. Preparing to unpack .../40-libdevmapper-event1.02.1_2%3a1.02.196-1+b1_i386.deb ... Unpacking libdevmapper-event1.02.1:i386 (2:1.02.196-1+b1) ... Selecting previously unselected package libudev-dev:i386. Preparing to unpack .../41-libudev-dev_256.7-2_i386.deb ... Unpacking libudev-dev:i386 (256.7-2) ... Selecting previously unselected package libsepol-dev:i386. Preparing to unpack .../42-libsepol-dev_3.7-1_i386.deb ... Unpacking libsepol-dev:i386 (3.7-1) ... Selecting previously unselected package libpcre2-16-0:i386. Preparing to unpack .../43-libpcre2-16-0_10.42-4+b2_i386.deb ... Unpacking libpcre2-16-0:i386 (10.42-4+b2) ... Selecting previously unselected package libpcre2-32-0:i386. Preparing to unpack .../44-libpcre2-32-0_10.42-4+b2_i386.deb ... Unpacking libpcre2-32-0:i386 (10.42-4+b2) ... Selecting previously unselected package libpcre2-posix3:i386. Preparing to unpack .../45-libpcre2-posix3_10.42-4+b2_i386.deb ... Unpacking libpcre2-posix3:i386 (10.42-4+b2) ... Selecting previously unselected package libpcre2-dev:i386. Preparing to unpack .../46-libpcre2-dev_10.42-4+b2_i386.deb ... Unpacking libpcre2-dev:i386 (10.42-4+b2) ... Selecting previously unselected package libselinux1-dev:i386. Preparing to unpack .../47-libselinux1-dev_3.7-3_i386.deb ... Unpacking libselinux1-dev:i386 (3.7-3) ... Selecting previously unselected package libdevmapper-dev:i386. Preparing to unpack .../48-libdevmapper-dev_2%3a1.02.196-1+b1_i386.deb ... Unpacking libdevmapper-dev:i386 (2:1.02.196-1+b1) ... Selecting previously unselected package libncurses6:i386. Preparing to unpack .../49-libncurses6_6.5-2+b1_i386.deb ... Unpacking libncurses6:i386 (6.5-2+b1) ... Selecting previously unselected package libncurses-dev:i386. Preparing to unpack .../50-libncurses-dev_6.5-2+b1_i386.deb ... Unpacking libncurses-dev:i386 (6.5-2+b1) ... Selecting previously unselected package libparted2t64:i386. Preparing to unpack .../51-libparted2t64_3.6-4+b1_i386.deb ... Adding 'diversion of /lib/i386-linux-gnu/libparted.so.2 to /lib/i386-linux-gnu/libparted.so.2.usr-is-merged by libparted2t64' Adding 'diversion of /lib/i386-linux-gnu/libparted.so.2.0.5 to /lib/i386-linux-gnu/libparted.so.2.0.5.usr-is-merged by libparted2t64' Unpacking libparted2t64:i386 (3.6-4+b1) ... Selecting previously unselected package libparted-fs-resize0t64:i386. Preparing to unpack .../52-libparted-fs-resize0t64_3.6-4+b1_i386.deb ... Adding 'diversion of /lib/i386-linux-gnu/libparted-fs-resize.so.0 to /lib/i386-linux-gnu/libparted-fs-resize.so.0.usr-is-merged by libparted-fs-resize0t64' Adding 'diversion of /lib/i386-linux-gnu/libparted-fs-resize.so.0.0.5 to /lib/i386-linux-gnu/libparted-fs-resize.so.0.0.5.usr-is-merged by libparted-fs-resize0t64' Unpacking libparted-fs-resize0t64:i386 (3.6-4+b1) ... Selecting previously unselected package libparted-dev:i386. Preparing to unpack .../53-libparted-dev_3.6-4+b1_i386.deb ... Unpacking libparted-dev:i386 (3.6-4+b1) ... Setting up libconfig9:i386 (1.5-0.4+b2) ... Setting up libpipeline1:i386 (1.5.8-1) ... Setting up libicu72:i386 (72.1-5+b1) ... Setting up bsdextrautils (2.40.2-9) ... Setting up libmagic-mgc (1:5.45-3+b1) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.20) ... Setting up libmagic1t64:i386 (1:5.45-3+b1) ... Setting up gettext-base (0.22.5-2) ... Setting up m4 (1.4.19-4) ... Setting up file (1:5.45-3+b1) ... Setting up libpcre2-16-0:i386 (10.42-4+b2) ... Setting up libelf1t64:i386 (0.192-4) ... Setting up autotools-dev (20220109.1) ... Setting up libpcre2-32-0:i386 (10.42-4+b2) ... Setting up libpkgconf3:i386 (1.8.1-4) ... Setting up uuid-dev:i386 (2.40.2-9) ... Setting up libncurses6:i386 (6.5-2+b1) ... Setting up autopoint (0.22.5-2) ... Setting up libudev-dev:i386 (256.7-2) ... Setting up libsepol-dev:i386 (3.7-1) ... Setting up pkgconf-bin (1.8.1-4) ... Setting up autoconf (2.72-3) ... Setting up libpcre2-posix3:i386 (10.42-4+b2) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:i386 (0.0.8-1+b2) ... Setting up dmidecode (3.6-1) ... Setting up libxml2:i386 (2.12.7+dfsg+really2.9.14-0.1) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up libblkid-dev:i386 (2.40.2-9) ... Setting up libncurses-dev:i386 (6.5-2+b1) ... Setting up gettext (0.22.5-2) ... Setting up libpcre2-dev:i386 (10.42-4+b2) ... Setting up libtool (2.4.7-7) ... Setting up libselinux1-dev:i386 (3.7-3) ... Setting up pkgconf:i386 (1.8.1-4) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up pkg-config:i386 (1.8.1-4) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up groff-base (1.23.0-5) ... Setting up libconfig-dev:i386 (1.5-0.4+b2) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.20) ... Setting up libdevmapper1.02.1:i386 (2:1.02.196-1+b1) ... Setting up dmsetup (2:1.02.196-1+b1) ... Setting up libdevmapper-event1.02.1:i386 (2:1.02.196-1+b1) ... Setting up libparted2t64:i386 (3.6-4+b1) ... Removing 'diversion of /lib/i386-linux-gnu/libparted.so.2 to /lib/i386-linux-gnu/libparted.so.2.usr-is-merged by libparted2t64' Removing 'diversion of /lib/i386-linux-gnu/libparted.so.2.0.5 to /lib/i386-linux-gnu/libparted.so.2.0.5.usr-is-merged by libparted2t64' Setting up libdevmapper-dev:i386 (2:1.02.196-1+b1) ... Setting up libparted-fs-resize0t64:i386 (3.6-4+b1) ... Removing 'diversion of /lib/i386-linux-gnu/libparted-fs-resize.so.0 to /lib/i386-linux-gnu/libparted-fs-resize.so.0.usr-is-merged by libparted-fs-resize0t64' Removing 'diversion of /lib/i386-linux-gnu/libparted-fs-resize.so.0.0.5 to /lib/i386-linux-gnu/libparted-fs-resize.so.0.0.5.usr-is-merged by libparted-fs-resize0t64' Setting up libparted-dev:i386 (3.6-4+b1) ... Processing triggers for libc-bin (2.40-3) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.36-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/reproducible-path/nwipe-0.37/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../nwipe_0.37-1_source.changes dpkg-buildpackage: info: source package nwipe dpkg-buildpackage: info: source version 0.37-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Martijn van Brummelen dpkg-source --before-build . dpkg-buildpackage: info: host architecture i386 dpkg-source: info: using options from nwipe-0.37/debian/source/options: --extend-diff-ignore=(^|/)(Makefile\.in|aclocal\.m4|depcomp|configure|install-sh|src/Makefile\.in|missing|man/Makefile\.in)$ fakeroot debian/rules clean dh clean --with autoreconf debian/rules override_dh_auto_clean make[1]: Entering directory '/build/reproducible-path/nwipe-0.37' [ ! -f Makefile ] || /usr/bin/make clean rm -f missing install-sh depcomp compile rm -f Makefile config.h config.h.in config.log config.status config.guess config.sub man/Makefile src/Makefile stamp-h1 src/isaac_rand/.dirstamp src/mt19937ar-cok/.dirstamp make[1]: Leaving directory '/build/reproducible-path/nwipe-0.37' dh_clean debian/rules build dh build --with autoreconf dh_update_autotools_config debian/rules override_dh_autoreconf make[1]: Entering directory '/build/reproducible-path/nwipe-0.37' aclocal autoheader automake --add-missing configure.ac:13: installing './compile' configure.ac:83: installing './config.guess' configure.ac:83: installing './config.sub' configure.ac:6: installing './install-sh' configure.ac:6: installing './missing' src/Makefile.am: installing './depcomp' autoconf make[1]: Leaving directory '/build/reproducible-path/nwipe-0.37' debian/rules override_dh_auto_configure make[1]: Entering directory '/build/reproducible-path/nwipe-0.37' dh_auto_configure -- --bindir=/usr/sbin ./configure --build=i686-linux-gnu --prefix=/usr --includedir=\${prefix}/include --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info --sysconfdir=/etc --localstatedir=/var --disable-option-checking --disable-silent-rules --libdir=\${prefix}/lib/i386-linux-gnu --runstatedir=/run --disable-maintainer-mode --disable-dependency-tracking --bindir=/usr/sbin checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a race-free mkdir -p... /usr/bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating src/Makefile config.status: creating man/Makefile checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether gcc accepts -g... yes checking for gcc option to enable C11 features... none needed checking whether gcc understands -c and -o together... yes checking whether make supports the include directive... yes (GNU style) checking dependency style of gcc... none checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for panel... yes checking for ncurses... yes checking for libconfig... yes checking for libintl_dgettext in -lintl... no checking for uuid_generate in -luuid... yes checking for libparted... yes checking for main in -lpthread... yes checking for libconfig.h... yes checking for fcntl.h... yes checking for inttypes.h... (cached) yes checking for netinet/in.h... yes checking for stddef.h... yes checking for stdint.h... (cached) yes checking for stdlib.h... (cached) yes checking for string.h... (cached) yes checking for sys/file.h... yes checking for sys/ioctl.h... yes checking for unistd.h... (cached) yes checking for size_t... yes checking for struct stat.st_blksize... yes checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking for GNU libc compatible malloc... yes checking for fdatasync... yes checking for memset... yes checking for regcomp... yes checking for strdup... yes checking for strerror... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating src/Makefile config.status: creating man/Makefile config.status: creating config.h config.status: executing depfiles commands make[1]: Leaving directory '/build/reproducible-path/nwipe-0.37' dh_auto_build make -j6 make[1]: Entering directory '/build/reproducible-path/nwipe-0.37' make all-recursive make[2]: Entering directory '/build/reproducible-path/nwipe-0.37' Making all in src make[3]: Entering directory '/build/reproducible-path/nwipe-0.37/src' gcc -DHAVE_CONFIG_H -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/nwipe-0.37=. -fstack-protector-strong -Wformat -Werror=format-security -D_DEFAULT_SOURCE -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE -D_XOPEN_SOURCE=600 -c -o nwipe.o nwipe.c gcc -DHAVE_CONFIG_H -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/nwipe-0.37=. -fstack-protector-strong -Wformat -Werror=format-security -D_DEFAULT_SOURCE -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE -D_XOPEN_SOURCE=600 -c -o gui.o gui.c gcc -DHAVE_CONFIG_H -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/nwipe-0.37=. -fstack-protector-strong -Wformat -Werror=format-security -D_DEFAULT_SOURCE -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE -D_XOPEN_SOURCE=600 -c -o pass.o pass.c gcc -DHAVE_CONFIG_H -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/nwipe-0.37=. -fstack-protector-strong -Wformat -Werror=format-security -D_DEFAULT_SOURCE -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE -D_XOPEN_SOURCE=600 -c -o device.o device.c gcc -DHAVE_CONFIG_H -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/nwipe-0.37=. -fstack-protector-strong -Wformat -Werror=format-security -D_DEFAULT_SOURCE -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE -D_XOPEN_SOURCE=600 -c -o logging.o logging.c gcc -DHAVE_CONFIG_H -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/nwipe-0.37=. -fstack-protector-strong -Wformat -Werror=format-security -D_DEFAULT_SOURCE -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE -D_XOPEN_SOURCE=600 -c -o method.o method.c gcc -DHAVE_CONFIG_H -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/nwipe-0.37=. -fstack-protector-strong -Wformat -Werror=format-security -D_DEFAULT_SOURCE -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE -D_XOPEN_SOURCE=600 -c -o options.o options.c gcc -DHAVE_CONFIG_H -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/nwipe-0.37=. -fstack-protector-strong -Wformat -Werror=format-security -D_DEFAULT_SOURCE -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE -D_XOPEN_SOURCE=600 -c -o prng.o prng.c gcc -DHAVE_CONFIG_H -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/nwipe-0.37=. -fstack-protector-strong -Wformat -Werror=format-security -D_DEFAULT_SOURCE -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE -D_XOPEN_SOURCE=600 -c -o version.o version.c gcc -DHAVE_CONFIG_H -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/nwipe-0.37=. -fstack-protector-strong -Wformat -Werror=format-security -D_DEFAULT_SOURCE -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE -D_XOPEN_SOURCE=600 -c -o temperature.o temperature.c gcc -DHAVE_CONFIG_H -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/nwipe-0.37=. -fstack-protector-strong -Wformat -Werror=format-security -D_DEFAULT_SOURCE -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE -D_XOPEN_SOURCE=600 -c -o create_pdf.o create_pdf.c gcc -DHAVE_CONFIG_H -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/nwipe-0.37=. -fstack-protector-strong -Wformat -Werror=format-security -D_DEFAULT_SOURCE -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE -D_XOPEN_SOURCE=600 -c -o hpa_dco.o hpa_dco.c prng.c: In function 'nwipe_add_lagg_fibonacci_prng_init': prng.c:272:47: error: passing argument 2 of 'add_lagg_fibonacci_init' from incompatible pointer type [-Wincompatible-pointer-types] 272 | (add_lagg_fibonacci_state_t*) *state, (unsigned long*) ( seed->s ), seed->length / sizeof( unsigned long ) ); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ | | | long unsigned int * In file included from prng.c:28: alfg/add_lagg_fibonacci_prng.h:40:75: note: expected 'uint64_t *' {aka 'long long unsigned int *'} but argument is of type 'long unsigned int *' 40 | void add_lagg_fibonacci_init( add_lagg_fibonacci_state_t* state, uint64_t init_key[], unsigned long key_length ); | ~~~~~~~~~^~~~~~~~~~ prng.c: In function 'nwipe_xoroshiro256_prng_init': prng.c:288:41: error: passing argument 2 of 'xoroshiro256_init' from incompatible pointer type [-Wincompatible-pointer-types] 288 | (xoroshiro256_state_t*) *state, (unsigned long*) ( seed->s ), seed->length / sizeof( unsigned long ) ); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ | | | long unsigned int * In file included from prng.c:29: xor/xoroshiro256_prng.h:39:63: note: expected 'uint64_t *' {aka 'long long unsigned int *'} but argument is of type 'long unsigned int *' 39 | void xoroshiro256_init( xoroshiro256_state_t* state, uint64_t init_key[], unsigned long key_length ); | ~~~~~~~~~^~~~~~~~~~ make[3]: *** [Makefile:536: prng.o] Error 1 make[3]: *** Waiting for unfinished jobs.... make[3]: Leaving directory '/build/reproducible-path/nwipe-0.37/src' make[2]: *** [Makefile:374: all-recursive] Error 1 make[2]: Leaving directory '/build/reproducible-path/nwipe-0.37' make[1]: *** [Makefile:315: all] Error 2 make[1]: Leaving directory '/build/reproducible-path/nwipe-0.37' dh_auto_build: error: make -j6 returned exit code 2 make: *** [debian/rules:5: build] Error 25 dpkg-buildpackage: error: debian/rules build subprocess returned exit status 2 I: copying local configuration E: Failed autobuilding of package I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/13889 and its subdirectories Thu Oct 31 11:43:25 UTC 2024 W: No second build log, what happened?