Wed Nov 20 07:46:02 UTC 2024 I: starting to build nwall/trixie/i386 on jenkins on '2024-11-20 07:45' Wed Nov 20 07:46:02 UTC 2024 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/i386_8/48221/console.log Wed Nov 20 07:46:02 UTC 2024 I: Downloading source for trixie/nwall=1.32+debian-10 --2024-11-20 07:46:02-- http://deb.debian.org/debian/pool/main/n/nwall/nwall_1.32%2bdebian-10.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 1736 (1.7K) [text/prs.lines.tag] Saving to: ‘nwall_1.32+debian-10.dsc’ 0K . 100% 217M=0s 2024-11-20 07:46:02 (217 MB/s) - ‘nwall_1.32+debian-10.dsc’ saved [1736/1736] Wed Nov 20 07:46:02 UTC 2024 I: nwall_1.32+debian-10.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: nwall Binary: nwall Architecture: any Version: 1.32+debian-10 Maintainer: Debian QA Group Standards-Version: 4.7.0 Vcs-Browser: https://salsa.debian.org/debian/nwall Vcs-Git: https://salsa.debian.org/debian/nwall.git Build-Depends: debhelper-compat (= 13), dh-sequence-zz-debputy-rrr (>= 0.1.48~), libncurses-dev, libreadline-dev | libreadline5-dev Package-List: nwall deb misc optional arch=any Checksums-Sha1: 4683094c6b208e0930a0a3173a49e2c2892f7a14 44604 nwall_1.32+debian.orig.tar.gz 77abc994dd5155aebd6d5b5871a4579974b5c5f0 6484 nwall_1.32+debian-10.debian.tar.xz Checksums-Sha256: aebf5b87628aaa25c7e41f0f89c7ccc16ebfe14193398d6d398cc3c71bcaf688 44604 nwall_1.32+debian.orig.tar.gz 486e0a89905e3c0b31822832ba29e92e43afb68fa2e783bca62a0d599b435d40 6484 nwall_1.32+debian-10.debian.tar.xz Files: da8e8b72d2cfb66445d5161cda7e08a1 44604 nwall_1.32+debian.orig.tar.gz 8b8790c014a148241d0a025869aa9f68 6484 nwall_1.32+debian-10.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQHEBAEBCgAuFiEEQGIgyLhVKAI3jM5BH1x6i0VWQxQFAmc2bG8QHGJhZ2VAZGVi aWFuLm9yZwAKCRAfXHqLRVZDFBxcDACMdrd9WZf+QA8adc5V+SOi5UHXMOMVptSw G4w6zKz9iDE9xBUTGlxdBrX8GJ/GqQcYvEvr8cE38G6eEZEgR77zO17D/bpJgYrH q9mtnuWcbMiNTI5CwSdnOIxnmwAdAu5bnOnaesYw65ssKmlLaqZ10eSuRnI3hx39 zPnU7t1Dbpe2KDQv2czNDGhr6/Nj6ICenCtHUgXaBNn4+KITI9929spNgZAhMall gFzXywwhiWHbt88B9qJZwhz9yGavpr+5CP7HYCJ/TlsmO3Ax0141OYA02xABj2RZ NnsCLo6bnB0aX1IQlawrtAmsojFSyaOyOna2UDYFsQrdNXBd4lq9mlNUUKSPbRHQ ET/AFnpUKfknxKEHDRt9MRpUyA3iWsL3TzJ3oikSfJuiwEatm/A3BrMFBlEQBSvi lP8jFHWCgQeodfmmpPDVuFgJw4zqqoQLitfrESv+gq8Vw9C6KN+n5O3xNxPsN/w7 /5EeXmY8cgEpEfbb9FbythUukYZyoBc= =I1py -----END PGP SIGNATURE----- Wed Nov 20 07:46:02 UTC 2024 I: Checking whether the package is not for us Wed Nov 20 07:46:02 UTC 2024 I: Starting 1st build on remote node ionos16-i386.debian.net. Wed Nov 20 07:46:02 UTC 2024 I: Preparing to do remote build '1' on ionos16-i386.debian.net. Wed Nov 20 07:46:48 UTC 2024 I: Deleting $TMPDIR on ionos16-i386.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Tue Dec 23 02:09:04 -12 2025 I: pbuilder-time-stamp: 1766498944 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: using eatmydata during job I: Copying source file I: copying [nwall_1.32+debian-10.dsc] I: copying [./nwall_1.32+debian.orig.tar.gz] I: copying [./nwall_1.32+debian-10.debian.tar.xz] I: Extracting source gpgv: Signature made Thu Nov 14 21:32:31 2024 gpgv: using RSA key 406220C8B8552802378CCE411F5C7A8B45564314 gpgv: issuer "bage@debian.org" gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./nwall_1.32+debian-10.dsc: no acceptable signature found dpkg-source: info: extracting nwall in nwall-1.32+debian dpkg-source: info: unpacking nwall_1.32+debian.orig.tar.gz dpkg-source: info: unpacking nwall_1.32+debian-10.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying 01-segfault.patch dpkg-source: info: applying 02-free-include.patch dpkg-source: info: applying 03-no-stderr-segfault.patch I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/120476/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='i386' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=22 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='i386' IFS=' ' INVOCATION_ID='9f294e860aeb48b9af37b30b6a13962e' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' LD_LIBRARY_PATH='/usr/lib/libeatmydata' LD_PRELOAD='libeatmydata.so' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='120476' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.oQuUSeu9/pbuilderrc_GjFK --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.oQuUSeu9/b1 --logfile b1/build.log nwall_1.32+debian-10.dsc' SUDO_GID='112' SUDO_UID='107' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://213.165.73.152:3128' I: uname -a Linux ionos16-i386 6.1.0-27-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.115-1 (2024-11-01) x86_64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Aug 4 2024 /bin -> usr/bin I: user script /srv/workspace/pbuilder/120476/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: i386 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), dh-sequence-zz-debputy-rrr (>= 0.1.48~), libncurses-dev, libreadline-dev | libreadline5-dev dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19956 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on dh-sequence-zz-debputy-rrr (>= 0.1.48~); however: Package dh-sequence-zz-debputy-rrr is not installed. pbuilder-satisfydepends-dummy depends on libncurses-dev; however: Package libncurses-dev is not installed. pbuilder-satisfydepends-dummy depends on libreadline-dev | libreadline5-dev; however: Package libreadline-dev is not installed. Package libreadline5-dev is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-debputy{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libcom-err2{a} libdebhelper-perl{a} libelf1t64{a} libexpat1{a} libfile-stripnondeterminism-perl{a} libgssapi-krb5-2{a} libicu72{a} libk5crypto3{a} libkeyutils1{a} libkrb5-3{a} libkrb5support0{a} libmagic-mgc{a} libmagic1t64{a} libncurses-dev{a} libncurses6{a} libnsl2{a} libpipeline1{a} libpython3-stdlib{a} libpython3.12-minimal{a} libpython3.12-stdlib{a} libreadline-dev{a} libreadline8t64{a} libtirpc-common{a} libtirpc3t64{a} libtool{a} libuchardet0{a} libxml2{a} lsb-release{a} m4{a} man-db{a} media-types{a} netbase{a} po-debconf{a} python3{a} python3-autocommand{a} python3-chardet{a} python3-colored{a} python3-colorlog{a} python3-debian{a} python3-distro{a} python3-inflect{a} python3-jaraco.context{a} python3-jaraco.functools{a} python3-minimal{a} python3-more-itertools{a} python3-pkg-resources{a} python3-ruyaml{a} python3-typeguard{a} python3-typing-extensions{a} python3.12{a} python3.12-minimal{a} readline-common{a} sensible-utils{a} strip-nondeterminism{a} tzdata{a} The following packages are RECOMMENDED but will NOT be installed: ca-certificates curl krb5-locales libarchive-cpio-perl libgpm2 libltdl-dev libmail-sendmail-perl lynx python3-apt python3-argcomplete wget zstd 0 packages upgraded, 71 newly installed, 0 to remove and 0 not upgraded. Need to get 29.4 MB of archives. After unpacking 115 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main i386 libpython3.12-minimal i386 3.12.7-3 [814 kB] Get: 2 http://deb.debian.org/debian trixie/main i386 libexpat1 i386 2.6.4-1 [107 kB] Get: 3 http://deb.debian.org/debian trixie/main i386 python3.12-minimal i386 3.12.7-3 [2236 kB] Get: 4 http://deb.debian.org/debian trixie/main i386 python3-minimal i386 3.12.6-1 [26.7 kB] Get: 5 http://deb.debian.org/debian trixie/main i386 media-types all 10.1.0 [26.9 kB] Get: 6 http://deb.debian.org/debian trixie/main i386 netbase all 6.4 [12.8 kB] Get: 7 http://deb.debian.org/debian trixie/main i386 tzdata all 2024b-3 [255 kB] Get: 8 http://deb.debian.org/debian trixie/main i386 libkrb5support0 i386 1.21.3-3 [34.9 kB] Get: 9 http://deb.debian.org/debian trixie/main i386 libcom-err2 i386 1.47.1-1+b1 [23.4 kB] Get: 10 http://deb.debian.org/debian trixie/main i386 libk5crypto3 i386 1.21.3-3 [83.6 kB] Get: 11 http://deb.debian.org/debian trixie/main i386 libkeyutils1 i386 1.6.3-4 [9600 B] Get: 12 http://deb.debian.org/debian trixie/main i386 libkrb5-3 i386 1.21.3-3 [350 kB] Get: 13 http://deb.debian.org/debian trixie/main i386 libgssapi-krb5-2 i386 1.21.3-3 [146 kB] Get: 14 http://deb.debian.org/debian trixie/main i386 libtirpc-common all 1.3.4+ds-1.3 [10.9 kB] Get: 15 http://deb.debian.org/debian trixie/main i386 libtirpc3t64 i386 1.3.4+ds-1.3+b1 [90.5 kB] Get: 16 http://deb.debian.org/debian trixie/main i386 libnsl2 i386 1.3.0-3+b3 [42.7 kB] Get: 17 http://deb.debian.org/debian trixie/main i386 readline-common all 8.2-5 [69.3 kB] Get: 18 http://deb.debian.org/debian trixie/main i386 libreadline8t64 i386 8.2-5 [173 kB] Get: 19 http://deb.debian.org/debian trixie/main i386 libpython3.12-stdlib i386 3.12.7-3 [1964 kB] Get: 20 http://deb.debian.org/debian trixie/main i386 python3.12 i386 3.12.7-3 [671 kB] Get: 21 http://deb.debian.org/debian trixie/main i386 libpython3-stdlib i386 3.12.6-1 [9692 B] Get: 22 http://deb.debian.org/debian trixie/main i386 python3 i386 3.12.6-1 [27.8 kB] Get: 23 http://deb.debian.org/debian trixie/main i386 sensible-utils all 0.0.24 [24.8 kB] Get: 24 http://deb.debian.org/debian trixie/main i386 libmagic-mgc i386 1:5.45-3+b1 [314 kB] Get: 25 http://deb.debian.org/debian trixie/main i386 libmagic1t64 i386 1:5.45-3+b1 [115 kB] Get: 26 http://deb.debian.org/debian trixie/main i386 file i386 1:5.45-3+b1 [43.2 kB] Get: 27 http://deb.debian.org/debian trixie/main i386 gettext-base i386 0.22.5-2 [201 kB] Get: 28 http://deb.debian.org/debian trixie/main i386 libuchardet0 i386 0.0.8-1+b2 [69.2 kB] Get: 29 http://deb.debian.org/debian trixie/main i386 groff-base i386 1.23.0-5 [1196 kB] Get: 30 http://deb.debian.org/debian trixie/main i386 bsdextrautils i386 2.40.2-11 [95.6 kB] Get: 31 http://deb.debian.org/debian trixie/main i386 libpipeline1 i386 1.5.8-1 [41.2 kB] Get: 32 http://deb.debian.org/debian trixie/main i386 man-db i386 2.13.0-1 [1428 kB] Get: 33 http://deb.debian.org/debian trixie/main i386 m4 i386 1.4.19-4 [293 kB] Get: 34 http://deb.debian.org/debian trixie/main i386 autoconf all 2.72-3 [493 kB] Get: 35 http://deb.debian.org/debian trixie/main i386 autotools-dev all 20220109.1 [51.6 kB] Get: 36 http://deb.debian.org/debian trixie/main i386 automake all 1:1.16.5-1.3 [823 kB] Get: 37 http://deb.debian.org/debian trixie/main i386 autopoint all 0.22.5-2 [723 kB] Get: 38 http://deb.debian.org/debian trixie/main i386 libdebhelper-perl all 13.20 [89.7 kB] Get: 39 http://deb.debian.org/debian trixie/main i386 libtool all 2.4.7-8 [517 kB] Get: 40 http://deb.debian.org/debian trixie/main i386 dh-autoreconf all 20 [17.1 kB] Get: 41 http://deb.debian.org/debian trixie/main i386 libarchive-zip-perl all 1.68-1 [104 kB] Get: 42 http://deb.debian.org/debian trixie/main i386 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get: 43 http://deb.debian.org/debian trixie/main i386 dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get: 44 http://deb.debian.org/debian trixie/main i386 libelf1t64 i386 0.192-4 [195 kB] Get: 45 http://deb.debian.org/debian trixie/main i386 dwz i386 0.15-1+b1 [116 kB] Get: 46 http://deb.debian.org/debian trixie/main i386 libicu72 i386 72.1-5+b1 [9583 kB] Get: 47 http://deb.debian.org/debian trixie/main i386 libxml2 i386 2.12.7+dfsg+really2.9.14-0.2+b1 [734 kB] Get: 48 http://deb.debian.org/debian trixie/main i386 gettext i386 0.22.5-2 [1631 kB] Get: 49 http://deb.debian.org/debian trixie/main i386 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 50 http://deb.debian.org/debian trixie/main i386 po-debconf all 1.0.21+nmu1 [248 kB] Get: 51 http://deb.debian.org/debian trixie/main i386 debhelper all 13.20 [915 kB] Get: 52 http://deb.debian.org/debian trixie/main i386 python3-colored all 2.2.4-1 [15.9 kB] Get: 53 http://deb.debian.org/debian trixie/main i386 python3-colorlog all 6.9.0-1 [27.5 kB] Get: 54 http://deb.debian.org/debian trixie/main i386 python3-autocommand all 2.2.2-3 [13.6 kB] Get: 55 http://deb.debian.org/debian trixie/main i386 python3-more-itertools all 10.5.0-1 [63.8 kB] Get: 56 http://deb.debian.org/debian trixie/main i386 python3-typing-extensions all 4.12.2-2 [73.0 kB] Get: 57 http://deb.debian.org/debian trixie/main i386 python3-typeguard all 4.4.1-1 [37.0 kB] Get: 58 http://deb.debian.org/debian trixie/main i386 python3-inflect all 7.3.1-2 [32.4 kB] Get: 59 http://deb.debian.org/debian trixie/main i386 python3-jaraco.context all 6.0.0-1 [7984 B] Get: 60 http://deb.debian.org/debian trixie/main i386 python3-jaraco.functools all 4.1.0-1 [12.0 kB] Get: 61 http://deb.debian.org/debian trixie/main i386 python3-pkg-resources all 74.1.2-2 [213 kB] Get: 62 http://deb.debian.org/debian trixie/main i386 python3-chardet all 5.2.0+dfsg-1 [107 kB] Get: 63 http://deb.debian.org/debian trixie/main i386 python3-debian all 0.1.49 [115 kB] Get: 64 http://deb.debian.org/debian trixie/main i386 lsb-release all 12.1-1 [5912 B] Get: 65 http://deb.debian.org/debian trixie/main i386 python3-distro all 1.9.0-1 [20.3 kB] Get: 66 http://deb.debian.org/debian trixie/main i386 python3-ruyaml all 0.91.0-3 [97.5 kB] Get: 67 http://deb.debian.org/debian trixie/main i386 strip-nondeterminism all 1.14.0-1 [8916 B] Get: 68 http://deb.debian.org/debian trixie/main i386 dh-debputy all 0.1.53 [487 kB] Get: 69 http://deb.debian.org/debian trixie/main i386 libncurses6 i386 6.5-2+b1 [112 kB] Get: 70 http://deb.debian.org/debian trixie/main i386 libncurses-dev i386 6.5-2+b1 [505 kB] Get: 71 http://deb.debian.org/debian trixie/main i386 libreadline-dev i386 8.2-5 [166 kB] Fetched 29.4 MB in 0s (66.1 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package libpython3.12-minimal:i386. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19956 files and directories currently installed.) Preparing to unpack .../libpython3.12-minimal_3.12.7-3_i386.deb ... Unpacking libpython3.12-minimal:i386 (3.12.7-3) ... Selecting previously unselected package libexpat1:i386. Preparing to unpack .../libexpat1_2.6.4-1_i386.deb ... Unpacking libexpat1:i386 (2.6.4-1) ... Selecting previously unselected package python3.12-minimal. Preparing to unpack .../python3.12-minimal_3.12.7-3_i386.deb ... Unpacking python3.12-minimal (3.12.7-3) ... Setting up libpython3.12-minimal:i386 (3.12.7-3) ... Setting up libexpat1:i386 (2.6.4-1) ... Setting up python3.12-minimal (3.12.7-3) ... Selecting previously unselected package python3-minimal. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20276 files and directories currently installed.) Preparing to unpack .../00-python3-minimal_3.12.6-1_i386.deb ... Unpacking python3-minimal (3.12.6-1) ... Selecting previously unselected package media-types. Preparing to unpack .../01-media-types_10.1.0_all.deb ... Unpacking media-types (10.1.0) ... Selecting previously unselected package netbase. Preparing to unpack .../02-netbase_6.4_all.deb ... Unpacking netbase (6.4) ... Selecting previously unselected package tzdata. Preparing to unpack .../03-tzdata_2024b-3_all.deb ... Unpacking tzdata (2024b-3) ... Selecting previously unselected package libkrb5support0:i386. Preparing to unpack .../04-libkrb5support0_1.21.3-3_i386.deb ... Unpacking libkrb5support0:i386 (1.21.3-3) ... Selecting previously unselected package libcom-err2:i386. Preparing to unpack .../05-libcom-err2_1.47.1-1+b1_i386.deb ... Unpacking libcom-err2:i386 (1.47.1-1+b1) ... Selecting previously unselected package libk5crypto3:i386. Preparing to unpack .../06-libk5crypto3_1.21.3-3_i386.deb ... Unpacking libk5crypto3:i386 (1.21.3-3) ... Selecting previously unselected package libkeyutils1:i386. Preparing to unpack .../07-libkeyutils1_1.6.3-4_i386.deb ... Unpacking libkeyutils1:i386 (1.6.3-4) ... Selecting previously unselected package libkrb5-3:i386. Preparing to unpack .../08-libkrb5-3_1.21.3-3_i386.deb ... Unpacking libkrb5-3:i386 (1.21.3-3) ... Selecting previously unselected package libgssapi-krb5-2:i386. Preparing to unpack .../09-libgssapi-krb5-2_1.21.3-3_i386.deb ... Unpacking libgssapi-krb5-2:i386 (1.21.3-3) ... Selecting previously unselected package libtirpc-common. Preparing to unpack .../10-libtirpc-common_1.3.4+ds-1.3_all.deb ... Unpacking libtirpc-common (1.3.4+ds-1.3) ... Selecting previously unselected package libtirpc3t64:i386. Preparing to unpack .../11-libtirpc3t64_1.3.4+ds-1.3+b1_i386.deb ... Adding 'diversion of /lib/i386-linux-gnu/libtirpc.so.3 to /lib/i386-linux-gnu/libtirpc.so.3.usr-is-merged by libtirpc3t64' Adding 'diversion of /lib/i386-linux-gnu/libtirpc.so.3.0.0 to /lib/i386-linux-gnu/libtirpc.so.3.0.0.usr-is-merged by libtirpc3t64' Unpacking libtirpc3t64:i386 (1.3.4+ds-1.3+b1) ... Selecting previously unselected package libnsl2:i386. Preparing to unpack .../12-libnsl2_1.3.0-3+b3_i386.deb ... Unpacking libnsl2:i386 (1.3.0-3+b3) ... Selecting previously unselected package readline-common. Preparing to unpack .../13-readline-common_8.2-5_all.deb ... Unpacking readline-common (8.2-5) ... Selecting previously unselected package libreadline8t64:i386. Preparing to unpack .../14-libreadline8t64_8.2-5_i386.deb ... Adding 'diversion of /lib/i386-linux-gnu/libhistory.so.8 to /lib/i386-linux-gnu/libhistory.so.8.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/i386-linux-gnu/libhistory.so.8.2 to /lib/i386-linux-gnu/libhistory.so.8.2.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/i386-linux-gnu/libreadline.so.8 to /lib/i386-linux-gnu/libreadline.so.8.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/i386-linux-gnu/libreadline.so.8.2 to /lib/i386-linux-gnu/libreadline.so.8.2.usr-is-merged by libreadline8t64' Unpacking libreadline8t64:i386 (8.2-5) ... Selecting previously unselected package libpython3.12-stdlib:i386. Preparing to unpack .../15-libpython3.12-stdlib_3.12.7-3_i386.deb ... Unpacking libpython3.12-stdlib:i386 (3.12.7-3) ... Selecting previously unselected package python3.12. Preparing to unpack .../16-python3.12_3.12.7-3_i386.deb ... Unpacking python3.12 (3.12.7-3) ... Selecting previously unselected package libpython3-stdlib:i386. Preparing to unpack .../17-libpython3-stdlib_3.12.6-1_i386.deb ... Unpacking libpython3-stdlib:i386 (3.12.6-1) ... Setting up python3-minimal (3.12.6-1) ... Selecting previously unselected package python3. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 21338 files and directories currently installed.) Preparing to unpack .../00-python3_3.12.6-1_i386.deb ... Unpacking python3 (3.12.6-1) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../01-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../02-libmagic-mgc_1%3a5.45-3+b1_i386.deb ... Unpacking libmagic-mgc (1:5.45-3+b1) ... Selecting previously unselected package libmagic1t64:i386. Preparing to unpack .../03-libmagic1t64_1%3a5.45-3+b1_i386.deb ... Unpacking libmagic1t64:i386 (1:5.45-3+b1) ... Selecting previously unselected package file. Preparing to unpack .../04-file_1%3a5.45-3+b1_i386.deb ... Unpacking file (1:5.45-3+b1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../05-gettext-base_0.22.5-2_i386.deb ... Unpacking gettext-base (0.22.5-2) ... Selecting previously unselected package libuchardet0:i386. Preparing to unpack .../06-libuchardet0_0.0.8-1+b2_i386.deb ... Unpacking libuchardet0:i386 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../07-groff-base_1.23.0-5_i386.deb ... Unpacking groff-base (1.23.0-5) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../08-bsdextrautils_2.40.2-11_i386.deb ... Unpacking bsdextrautils (2.40.2-11) ... Selecting previously unselected package libpipeline1:i386. Preparing to unpack .../09-libpipeline1_1.5.8-1_i386.deb ... Unpacking libpipeline1:i386 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../10-man-db_2.13.0-1_i386.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../11-m4_1.4.19-4_i386.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../12-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../13-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../14-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../15-autopoint_0.22.5-2_all.deb ... Unpacking autopoint (0.22.5-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../16-libdebhelper-perl_13.20_all.deb ... Unpacking libdebhelper-perl (13.20) ... Selecting previously unselected package libtool. Preparing to unpack .../17-libtool_2.4.7-8_all.deb ... Unpacking libtool (2.4.7-8) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../18-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../19-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../20-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../21-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:i386. Preparing to unpack .../22-libelf1t64_0.192-4_i386.deb ... Unpacking libelf1t64:i386 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../23-dwz_0.15-1+b1_i386.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libicu72:i386. Preparing to unpack .../24-libicu72_72.1-5+b1_i386.deb ... Unpacking libicu72:i386 (72.1-5+b1) ... Selecting previously unselected package libxml2:i386. Preparing to unpack .../25-libxml2_2.12.7+dfsg+really2.9.14-0.2+b1_i386.deb ... Unpacking libxml2:i386 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Selecting previously unselected package gettext. Preparing to unpack .../26-gettext_0.22.5-2_i386.deb ... Unpacking gettext (0.22.5-2) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../27-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../28-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../29-debhelper_13.20_all.deb ... Unpacking debhelper (13.20) ... Selecting previously unselected package python3-colored. Preparing to unpack .../30-python3-colored_2.2.4-1_all.deb ... Unpacking python3-colored (2.2.4-1) ... Selecting previously unselected package python3-colorlog. Preparing to unpack .../31-python3-colorlog_6.9.0-1_all.deb ... Unpacking python3-colorlog (6.9.0-1) ... Selecting previously unselected package python3-autocommand. Preparing to unpack .../32-python3-autocommand_2.2.2-3_all.deb ... Unpacking python3-autocommand (2.2.2-3) ... Selecting previously unselected package python3-more-itertools. Preparing to unpack .../33-python3-more-itertools_10.5.0-1_all.deb ... Unpacking python3-more-itertools (10.5.0-1) ... Selecting previously unselected package python3-typing-extensions. Preparing to unpack .../34-python3-typing-extensions_4.12.2-2_all.deb ... Unpacking python3-typing-extensions (4.12.2-2) ... Selecting previously unselected package python3-typeguard. Preparing to unpack .../35-python3-typeguard_4.4.1-1_all.deb ... Unpacking python3-typeguard (4.4.1-1) ... Selecting previously unselected package python3-inflect. Preparing to unpack .../36-python3-inflect_7.3.1-2_all.deb ... Unpacking python3-inflect (7.3.1-2) ... Selecting previously unselected package python3-jaraco.context. Preparing to unpack .../37-python3-jaraco.context_6.0.0-1_all.deb ... Unpacking python3-jaraco.context (6.0.0-1) ... Selecting previously unselected package python3-jaraco.functools. Preparing to unpack .../38-python3-jaraco.functools_4.1.0-1_all.deb ... Unpacking python3-jaraco.functools (4.1.0-1) ... Selecting previously unselected package python3-pkg-resources. Preparing to unpack .../39-python3-pkg-resources_74.1.2-2_all.deb ... Unpacking python3-pkg-resources (74.1.2-2) ... Selecting previously unselected package python3-chardet. Preparing to unpack .../40-python3-chardet_5.2.0+dfsg-1_all.deb ... Unpacking python3-chardet (5.2.0+dfsg-1) ... Selecting previously unselected package python3-debian. Preparing to unpack .../41-python3-debian_0.1.49_all.deb ... Unpacking python3-debian (0.1.49) ... Selecting previously unselected package lsb-release. Preparing to unpack .../42-lsb-release_12.1-1_all.deb ... Unpacking lsb-release (12.1-1) ... Selecting previously unselected package python3-distro. Preparing to unpack .../43-python3-distro_1.9.0-1_all.deb ... Unpacking python3-distro (1.9.0-1) ... Selecting previously unselected package python3-ruyaml. Preparing to unpack .../44-python3-ruyaml_0.91.0-3_all.deb ... Unpacking python3-ruyaml (0.91.0-3) ... Selecting previously unselected package strip-nondeterminism. Preparing to unpack .../45-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package dh-debputy. Preparing to unpack .../46-dh-debputy_0.1.53_all.deb ... Unpacking dh-debputy (0.1.53) ... Selecting previously unselected package libncurses6:i386. Preparing to unpack .../47-libncurses6_6.5-2+b1_i386.deb ... Unpacking libncurses6:i386 (6.5-2+b1) ... Selecting previously unselected package libncurses-dev:i386. Preparing to unpack .../48-libncurses-dev_6.5-2+b1_i386.deb ... Unpacking libncurses-dev:i386 (6.5-2+b1) ... Selecting previously unselected package libreadline-dev:i386. Preparing to unpack .../49-libreadline-dev_8.2-5_i386.deb ... Unpacking libreadline-dev:i386 (8.2-5) ... Setting up media-types (10.1.0) ... Setting up libpipeline1:i386 (1.5.8-1) ... Setting up libkeyutils1:i386 (1.6.3-4) ... Setting up libicu72:i386 (72.1-5+b1) ... Setting up bsdextrautils (2.40.2-11) ... Setting up libmagic-mgc (1:5.45-3+b1) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libtirpc-common (1.3.4+ds-1.3) ... Setting up libdebhelper-perl (13.20) ... Setting up libmagic1t64:i386 (1:5.45-3+b1) ... Setting up gettext-base (0.22.5-2) ... Setting up m4 (1.4.19-4) ... Setting up libcom-err2:i386 (1.47.1-1+b1) ... Setting up file (1:5.45-3+b1) ... Setting up libelf1t64:i386 (0.192-4) ... Setting up libkrb5support0:i386 (1.21.3-3) ... Setting up tzdata (2024b-3) ... Current default time zone: 'Etc/UTC' Local time is now: Tue Dec 23 14:09:30 UTC 2025. Universal Time is now: Tue Dec 23 14:09:30 UTC 2025. Run 'dpkg-reconfigure tzdata' if you wish to change it. Setting up autotools-dev (20220109.1) ... Setting up libncurses6:i386 (6.5-2+b1) ... Setting up autopoint (0.22.5-2) ... Setting up libk5crypto3:i386 (1.21.3-3) ... Setting up autoconf (2.72-3) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:i386 (0.0.8-1+b2) ... Setting up netbase (6.4) ... Setting up libkrb5-3:i386 (1.21.3-3) ... Setting up lsb-release (12.1-1) ... Setting up readline-common (8.2-5) ... Setting up libxml2:i386 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up libncurses-dev:i386 (6.5-2+b1) ... Setting up gettext (0.22.5-2) ... Setting up libtool (2.4.7-8) ... Setting up strip-nondeterminism (1.14.0-1) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up libgssapi-krb5-2:i386 (1.21.3-3) ... Setting up libreadline8t64:i386 (8.2-5) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up groff-base (1.23.0-5) ... Setting up libtirpc3t64:i386 (1.3.4+ds-1.3+b1) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up libreadline-dev:i386 (8.2-5) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up libnsl2:i386 (1.3.0-3+b3) ... Setting up libpython3.12-stdlib:i386 (3.12.7-3) ... Setting up python3.12 (3.12.7-3) ... Setting up debhelper (13.20) ... Setting up libpython3-stdlib:i386 (3.12.6-1) ... Setting up python3 (3.12.6-1) ... Setting up python3-autocommand (2.2.2-3) ... Setting up python3-typing-extensions (4.12.2-2) ... Setting up python3-colored (2.2.4-1) ... Setting up python3-more-itertools (10.5.0-1) ... Setting up python3-jaraco.functools (4.1.0-1) ... Setting up python3-distro (1.9.0-1) ... Setting up python3-jaraco.context (6.0.0-1) ... Setting up python3-colorlog (6.9.0-1) ... Setting up python3-typeguard (4.4.1-1) ... Setting up python3-inflect (7.3.1-2) ... Setting up python3-pkg-resources (74.1.2-2) ... Setting up python3-chardet (5.2.0+dfsg-1) ... Setting up python3-debian (0.1.49) ... Setting up python3-ruyaml (0.91.0-3) ... Setting up dh-debputy (0.1.53) ... Processing triggers for libc-bin (2.40-3) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/reproducible-path/nwall-1.32+debian/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../nwall_1.32+debian-10_source.changes dpkg-buildpackage: info: source package nwall dpkg-buildpackage: info: source version 1.32+debian-10 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Bastian Germann dpkg-source --before-build . dpkg-buildpackage: info: host architecture i386 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf autoreconf: warning: autoconf input should be named 'configure.ac', not 'configure.in' aclocal: warning: autoconf input should be named 'configure.ac', not 'configure.in' configure.in:3: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. ./lib/autoconf/general.m4:2434: AC_DIAGNOSE is expanded from... aclocal.m4:429: AM_INIT_AUTOMAKE is expanded from... configure.in:3: the top level configure.in:4: warning: 'AM_CONFIG_HEADER': this macro is obsolete. configure.in:4: You should use the 'AC_CONFIG_HEADERS' macro instead. ./lib/autoconf/general.m4:2434: AC_DIAGNOSE is expanded from... aclocal.m4:745: AM_CONFIG_HEADER is expanded from... configure.in:4: the top level configure.in:5: warning: The macro 'AC_LANG_C' is obsolete. configure.in:5: You should run autoupdate. ./lib/autoconf/c.m4:72: AC_LANG_C is expanded from... configure.in:5: the top level configure.in:17: warning: The macro 'AC_HEADER_STDC' is obsolete. configure.in:17: You should run autoupdate. ./lib/autoconf/headers.m4:663: AC_HEADER_STDC is expanded from... configure.in:17: the top level configure.in:25: warning: The macro 'AC_TYPE_SIGNAL' is obsolete. configure.in:25: You should run autoupdate. ./lib/autoconf/types.m4:805: AC_TYPE_SIGNAL is expanded from... configure.in:25: the top level configure.in:32: warning: AC_OUTPUT should be used without arguments. configure.in:32: You should run autoupdate. autoheader: warning: autoconf input should be named 'configure.ac', not 'configure.in' automake: warning: autoconf input should be named 'configure.ac', not 'configure.in' configure.in:3: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. For more info, see: configure.in:3: https://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_005fINIT_005fAUTOMAKE-invocation configure.in:8: installing './compile' src/Makefile.am:5: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS') src/Makefile.am: installing './depcomp' automake: warning: autoconf input should be named 'configure.ac', not 'configure.in' debian/rules override_dh_auto_configure make[1]: Entering directory '/build/reproducible-path/nwall-1.32+debian' dh_auto_configure -- --without-setuid ./configure --build=i686-linux-gnu --prefix=/usr --includedir=\${prefix}/include --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info --sysconfdir=/etc --localstatedir=/var --disable-option-checking --disable-silent-rules --libdir=\${prefix}/lib/i386-linux-gnu --runstatedir=/run --disable-maintainer-mode --disable-dependency-tracking --without-setuid checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a race-free mkdir -p... /usr/bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether gcc accepts -g... yes checking for gcc option to enable C11 features... none needed checking whether gcc understands -c and -o together... yes checking whether make supports the include directive... yes (GNU style) checking dependency style of gcc... none checking for add_history in -lreadline... yes checking for dirent.h that defines DIR... yes checking for library containing opendir... none required checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for sys/wait.h that is POSIX.1 compatible... yes checking for fcntl.h... yes checking for paths.h... yes checking for unistd.h... (cached) yes checking for size_t... yes checking return type of signal handlers... void checking for strerror... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating src/Makefile config.status: creating config.h config.status: executing depfiles commands make[1]: Leaving directory '/build/reproducible-path/nwall-1.32+debian' dh_auto_build make -j22 make[1]: Entering directory '/build/reproducible-path/nwall-1.32+debian' make all-recursive make[2]: Entering directory '/build/reproducible-path/nwall-1.32+debian' Making all in src make[3]: Entering directory '/build/reproducible-path/nwall-1.32+debian/src' gcc -DHAVE_CONFIG_H -I. -I.. -DLOGFILE=\"/var/log/nwall.log\" -DLOCKFILE=\"/var/lock/nwall/\%s\" -DLOCKDIR=\"/var/lock/nwall/\" -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/nwall-1.32+debian=. -fstack-protector-strong -Wformat -Werror=format-security -c -o ttymsg.o ttymsg.c gcc -DHAVE_CONFIG_H -I. -I.. -DLOGFILE=\"/var/log/nwall.log\" -DLOCKFILE=\"/var/lock/nwall/\%s\" -DLOCKDIR=\"/var/lock/nwall/\" -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/nwall-1.32+debian=. -fstack-protector-strong -Wformat -Werror=format-security -c -o nwall.o nwall.c ttymsg.c: In function 'ttymsg': ttymsg.c:165:25: warning: 'sigsetmask' is deprecated [-Wdeprecated-declarations] 165 | (void) sigsetmask(0); | ^ In file included from /usr/include/i386-linux-gnu/sys/wait.h:36, from ttymsg.c:44: /usr/include/signal.h:176:12: note: declared here 176 | extern int sigsetmask (int __mask) __THROW __attribute_deprecated__; | ^~~~~~~~~~ nwall.c: In function 'NwallFormatMessage': nwall.c:233:19: warning: format '%s' expects argument of type 'char *', but argument 6 has type 'void *' [-Wformat=] 233 | " %s@%s> %s\r\n", username, ttystring, inmsg.iov_base); | ~^ ~~~~~~~~~~~~~~ | | | | char * void * | %p nwall.c: In function 'NwallFormatAction': nwall.c:258:22: warning: format '%s' expects argument of type 'char *', but argument 6 has type 'void *' [-Wformat=] 258 | " *** %s@%s %s\r\n", username, ttystring, action.iov_base); | ~^ ~~~~~~~~~~~~~~~ | | | | char * void * | %p nwall.c: In function 'NwallWriteAll': nwall.c:297:13: warning: 'strlen' argument 1 declared attribute 'nonstring' [-Wstringop-overread] 297 | strlen(utmpptr->ut_line) + sizeof(char); | ^~~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/utmp.h:29, from nwall.c:24: /usr/include/i386-linux-gnu/bits/utmp.h:62:8: note: argument 'ut_line' declared here 62 | char ut_line[UT_LINESIZE] | ^~~~~~~ nwall.c:311:26: warning: 'strcmp' argument 1 declared attribute 'nonstring' [-Wstringop-overread] 311 | if(pwuid && !strcmp(utmpptr->ut_user, pwuid->pw_name)) { | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /usr/include/i386-linux-gnu/bits/utmp.h:66:8: note: argument 'ut_user' declared here 66 | char ut_user[UT_NAMESIZE] | ^~~~~~~ gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/nwall-1.32+debian=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -o nwall ttymsg.o nwall.o -lreadline -lncurses -lreadline make[3]: Leaving directory '/build/reproducible-path/nwall-1.32+debian/src' make[3]: Entering directory '/build/reproducible-path/nwall-1.32+debian' make[3]: Leaving directory '/build/reproducible-path/nwall-1.32+debian' make[2]: Leaving directory '/build/reproducible-path/nwall-1.32+debian' make[1]: Leaving directory '/build/reproducible-path/nwall-1.32+debian' dh_auto_test make -j22 check "TESTSUITEFLAGS=-j22 --verbose" VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/nwall-1.32+debian' Making check in src make[2]: Entering directory '/build/reproducible-path/nwall-1.32+debian/src' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/build/reproducible-path/nwall-1.32+debian/src' make[2]: Entering directory '/build/reproducible-path/nwall-1.32+debian' make[2]: Leaving directory '/build/reproducible-path/nwall-1.32+debian' make[1]: Leaving directory '/build/reproducible-path/nwall-1.32+debian' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/nwall/ make -j22 install DESTDIR=/build/reproducible-path/nwall-1.32\+debian/debian/nwall AM_UPDATE_INFO_DIR=no make[1]: Entering directory '/build/reproducible-path/nwall-1.32+debian' Making install in src make[2]: Entering directory '/build/reproducible-path/nwall-1.32+debian/src' make[3]: Entering directory '/build/reproducible-path/nwall-1.32+debian/src' make[3]: Nothing to be done for 'install-data-am'. /usr/bin/mkdir -p '/build/reproducible-path/nwall-1.32+debian/debian/nwall/usr/bin' /usr/bin/install -c nwall '/build/reproducible-path/nwall-1.32+debian/debian/nwall/usr/bin' make install-exec-hook make[4]: Entering directory '/build/reproducible-path/nwall-1.32+debian/src' [ -d /build/reproducible-path/nwall-1.32+debian/debian/nwall/var/log/nwall ] || mkdir -p /build/reproducible-path/nwall-1.32+debian/debian/nwall/var/log [ -d /build/reproducible-path/nwall-1.32+debian/debian/nwall/var/lock/nwall/pts ] || mkdir -p /build/reproducible-path/nwall-1.32+debian/debian/nwall/var/lock/nwall/pts make[4]: Leaving directory '/build/reproducible-path/nwall-1.32+debian/src' make[3]: Leaving directory '/build/reproducible-path/nwall-1.32+debian/src' make[2]: Leaving directory '/build/reproducible-path/nwall-1.32+debian/src' make[2]: Entering directory '/build/reproducible-path/nwall-1.32+debian' make[3]: Entering directory '/build/reproducible-path/nwall-1.32+debian' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/build/reproducible-path/nwall-1.32+debian' make[2]: Leaving directory '/build/reproducible-path/nwall-1.32+debian' make[1]: Leaving directory '/build/reproducible-path/nwall-1.32+debian' debian/rules execute_after_dh_install make[1]: Entering directory '/build/reproducible-path/nwall-1.32+debian' rmdir /build/reproducible-path/nwall-1.32+debian/debian/nwall/var/lock/nwall/pts /build/reproducible-path/nwall-1.32+debian/debian/nwall/var/lock/nwall /build/reproducible-path/nwall-1.32+debian/debian/nwall/var/lock # Not sure it makes sense to have a log file in # the deb. But that is what 1.32+debian-8 had # and so it was preserved (1:1). touch /build/reproducible-path/nwall-1.32+debian/debian/nwall/var/log/nwall.log make[1]: Leaving directory '/build/reproducible-path/nwall-1.32+debian' dh_installdocs dh_installchangelogs dh_installman dh_installlogrotate dh_lintian dh_perl dh_link dh_strip_nondeterminism dh_compress dh_missing dh_dwz -a dh_strip -a dh_makeshlibs -a dh_installdeb dh_debputy dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libreadline8t64 from: /lib/i386-linux-gnu/libreadline.so.8 dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libreadline8t64 to: /lib/i386-linux-gnu/libreadline.so.8.usr-is-merged dpkg-deb: building package 'nwall-dbgsym' in '../nwall-dbgsym_1.32+debian-10_i386.deb'. Generated ../nwall_1.32+debian-10_i386.deb dpkg-genbuildinfo --build=binary -O../nwall_1.32+debian-10_i386.buildinfo dpkg-genchanges --build=binary -O../nwall_1.32+debian-10_i386.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/120476 and its subdirectories I: Current time: Tue Dec 23 02:09:47 -12 2025 I: pbuilder-time-stamp: 1766498987 Wed Nov 20 07:46:49 UTC 2024 I: 1st build successful. Starting 2nd build on remote node ionos12-i386.debian.net. Wed Nov 20 07:46:49 UTC 2024 I: Preparing to do remote build '2' on ionos12-i386.debian.net. Wed Nov 20 07:47:43 UTC 2024 I: Deleting $TMPDIR on ionos12-i386.debian.net. Wed Nov 20 07:47:44 UTC 2024 I: nwall_1.32+debian-10_i386.changes: Format: 1.8 Date: Thu, 14 Nov 2024 21:30:05 +0000 Source: nwall Binary: nwall nwall-dbgsym Architecture: i386 Version: 1.32+debian-10 Distribution: unstable Urgency: medium Maintainer: Debian QA Group Changed-By: Bastian Germann Description: nwall - version of wall that uses GNU readline Changes: nwall (1.32+debian-10) unstable; urgency=medium . * QA upload. * d/copyright: Convert to machine-readable format. * Codify the current (unnecessary) repack rules. Checksums-Sha1: e5e1216e01627e3b7ee1b3d6578ca34b60c5b7aa 12948 nwall-dbgsym_1.32+debian-10_i386.deb 2601179245f258dee1e5e1aece834169946a6307 6263 nwall_1.32+debian-10_i386.buildinfo 6427b69d049c314120613d5db6d64c8864bb8b46 11316 nwall_1.32+debian-10_i386.deb Checksums-Sha256: 139a63037b87495ab01eecf6ff82b27b2c76bb48cfc792df12c167505ec167e4 12948 nwall-dbgsym_1.32+debian-10_i386.deb 509ac4b423cdb5b6977d9d526ac5e67f9556ba0c6c88182d75f30a3b2cbc30ec 6263 nwall_1.32+debian-10_i386.buildinfo 3d8cd05c127acadf5bc2dd085eac77f85dc0acf842da787b6e5f6c92819e54f3 11316 nwall_1.32+debian-10_i386.deb Files: 88dbe0e85c0fd0998d631a9c9ccebf51 12948 debug optional nwall-dbgsym_1.32+debian-10_i386.deb d510b7faf4305619959e68a610315780 6263 misc optional nwall_1.32+debian-10_i386.buildinfo e861c756ad792d7d5b60c35cc3eb5f3b 11316 misc optional nwall_1.32+debian-10_i386.deb Wed Nov 20 07:47:46 UTC 2024 I: diffoscope 283 will be used to compare the two builds: Running as unit: rb-diffoscope-i386_8-48221.service # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.oQuUSeu9/nwall_1.32+debian-10.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.oQuUSeu9/nwall_1.32+debian-10.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.oQuUSeu9/nwall_1.32+debian-10.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.oQuUSeu9/b1/nwall_1.32+debian-10_i386.changes /srv/reproducible-results/rbuild-debian/r-b-build.oQuUSeu9/b2/nwall_1.32+debian-10_i386.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.345s) 0.345s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.014s) 0.014s 12 calls diffoscope.comparators.binary.FilesystemFile ## specialize (total time: 0.000s) 0.000s 1 call specialize Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 646ms CPU time consumed: 642ms Wed Nov 20 07:47:47 UTC 2024 I: diffoscope 283 found no differences in the changes files, and a .buildinfo file also exists. Wed Nov 20 07:47:47 UTC 2024 I: nwall from trixie built successfully and reproducibly on i386. Wed Nov 20 07:47:49 UTC 2024 I: Submitting .buildinfo files to external archives: Wed Nov 20 07:47:49 UTC 2024 I: Submitting 8.0K b1/nwall_1.32+debian-10_i386.buildinfo.asc Wed Nov 20 07:47:50 UTC 2024 I: Submitting 8.0K b2/nwall_1.32+debian-10_i386.buildinfo.asc Wed Nov 20 07:47:51 UTC 2024 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Wed Nov 20 07:47:51 UTC 2024 I: Done submitting .buildinfo files. Wed Nov 20 07:47:51 UTC 2024 I: Removing signed nwall_1.32+debian-10_i386.buildinfo.asc files: removed './b1/nwall_1.32+debian-10_i386.buildinfo.asc' removed './b2/nwall_1.32+debian-10_i386.buildinfo.asc'