Sun Oct 20 05:31:03 UTC 2024 I: starting to build libpam-x2go/trixie/i386 on jenkins on '2024-10-20 05:30' Sun Oct 20 05:31:03 UTC 2024 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/i386_6/40797/console.log Sun Oct 20 05:31:03 UTC 2024 I: Downloading source for trixie/libpam-x2go=0.0.2.0-3.1 --2024-10-20 05:31:04-- http://deb.debian.org/debian/pool/main/libp/libpam-x2go/libpam-x2go_0.0.2.0-3.1.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2419 (2.4K) [text/prs.lines.tag] Saving to: ‘libpam-x2go_0.0.2.0-3.1.dsc’ 0K .. 100% 325M=0s 2024-10-20 05:31:04 (325 MB/s) - ‘libpam-x2go_0.0.2.0-3.1.dsc’ saved [2419/2419] Sun Oct 20 05:31:04 UTC 2024 I: libpam-x2go_0.0.2.0-3.1.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Format: 3.0 (quilt) Source: libpam-x2go Binary: libpam-x2go, libpam-x2go-dev Architecture: any Version: 0.0.2.0-3.1 Maintainer: Debian Remote Maintainers Uploaders: Mike Gabriel , Homepage: https://github.com/ArcticaProject/libpam-x2go Standards-Version: 4.4.1 Vcs-Browser: https://salsa.debian.org/debian-remote-team/libpam-x2go Vcs-Git: https://salsa.debian.org/debian-remote-team/libpam-x2go.git Build-Depends: debhelper (>= 10~), dh-autoreconf, dpkg-dev (>= 1.16.1.1~), libgtest-dev, libpam0g-dev, libssh-dev, pkg-config, cdbs (>= 0.4.93~) Package-List: libpam-x2go deb admin optional arch=any libpam-x2go-dev deb libdevel optional arch=any Checksums-Sha1: c08788310777c055dc6b6300c41c33ff6e99528b 31692 libpam-x2go_0.0.2.0.orig.tar.gz c7dd5a7d47d61cdc2ed2d2f7daf397d674a0b8c9 833 libpam-x2go_0.0.2.0.orig.tar.gz.asc 17aaffde9890c2d6b8384f0bd9bd09b48ab866ea 13060 libpam-x2go_0.0.2.0-3.1.debian.tar.xz Checksums-Sha256: 0b5b5b51073c51922b794d06ed6d6a0e67a6f130a2ba15d20d3de9a858891f4b 31692 libpam-x2go_0.0.2.0.orig.tar.gz ee014969d2760a0a2896c0055eeae2a3d8d86d4a3fb4c1caa56c1cacd4d6a0a6 833 libpam-x2go_0.0.2.0.orig.tar.gz.asc e8bf1e37a8cafccb612510dd6b2dacf3b7de719a521e08602ec8de328d93694f 13060 libpam-x2go_0.0.2.0-3.1.debian.tar.xz Files: 3d76b28208a7150b8700bd2370f73254 31692 libpam-x2go_0.0.2.0.orig.tar.gz 2d6f05d9c23c4fddd44f22fa85e0f525 833 libpam-x2go_0.0.2.0.orig.tar.gz.asc 2b96b33bf268ad0f3f8c6ff1860772f4 13060 libpam-x2go_0.0.2.0-3.1.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQIzBAEBCAAdFiEEfRrP+tnggGycTNOSXBPW25MFLgMFAmZRmnUACgkQXBPW25MF LgOtxA/8CpnY27pzq/xFCLWIDZAFYOwpSykHRlR5UmY5J+1naGAqX0WDnCWxiadx Yz7T+ACYzklk+TzLCq6EVmigMTi7wUiHtyK5GxsSrsUpVeltis+fXQ/YTy33LwHH L0bPBp/lYzgtl9dbHPK/y+Kz2PDPOnmpwv3/dxTStDFW/tvXRgc/2XERMvMTylbm NHgkSQptEALe31Ld+eEq6ETttFFL+2lIlQbwYeaLnvNnNe+djzn4zYDdZJytg8XU VXxCK/EheVChOmSlplyN8edIaQafoBkVgVk2fy4Yl71cLKE4K5F+gx8ZciOcw8Vp Z0nuYDFr3ozX864M2GzYhHaAcEin9xmzTg0qE/9GxOuC/qoWKElPyLHUa5CsO4zj xockzY4kBASSiBFQvkdWqqY49FxZH+8APiJ1RnhVSbOATGeZwRwvheO5fC2fHoOb jbw7RAUxcfldErKFoM81KNo+m3ruljVUPhxTvNO1ngkiDm/yWwuOSQFsSbgY5llR zRu3QBrCufmWhcp83CtgyT6eVCpIxmr7Fj4yBe5yWU2vqNZB4NU+p0HyCM+G6VvV nB8Rs/WEdi4npBv708AMmDQw3X8pIqhqmmWccQ9PCJOlvx1LtSLeYUJwQGEF3GCd P7yne1rxHNWrlTkKO3uE7KOVkZ4/6wEx3oGL3MQRKi776mF62J4= =mwme -----END PGP SIGNATURE----- Sun Oct 20 05:31:04 UTC 2024 I: Checking whether the package is not for us Sun Oct 20 05:31:04 UTC 2024 I: Starting 1st build on remote node ionos6-i386.debian.net. Sun Oct 20 05:31:04 UTC 2024 I: Preparing to do remote build '1' on ionos6-i386.debian.net. Sun Oct 20 05:32:10 UTC 2024 I: Deleting $TMPDIR on ionos6-i386.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Fri Nov 21 23:54:00 -12 2025 I: pbuilder-time-stamp: 1763812440 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: using eatmydata during job I: Copying source file I: copying [libpam-x2go_0.0.2.0-3.1.dsc] I: copying [./libpam-x2go_0.0.2.0.orig.tar.gz] I: copying [./libpam-x2go_0.0.2.0.orig.tar.gz.asc] I: copying [./libpam-x2go_0.0.2.0-3.1.debian.tar.xz] I: Extracting source gpgv: Signature made Sat May 25 07:59:49 2024 gpgv: using RSA key 7D1ACFFAD9E0806C9C4CD3925C13D6DB93052E03 gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./libpam-x2go_0.0.2.0-3.1.dsc: no acceptable signature found dpkg-source: info: extracting libpam-x2go in libpam-x2go-0.0.2.0 dpkg-source: info: unpacking libpam-x2go_0.0.2.0.orig.tar.gz dpkg-source: info: unpacking libpam-x2go_0.0.2.0-3.1.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying 1001_dont_abuse_AC_CHECK_FILES.patch dpkg-source: info: applying pammoddir.patch I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/39400/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='i386' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=22 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='i386' IFS=' ' INVOCATION_ID='07bdb020865942008d943921b635621d' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' LD_LIBRARY_PATH='/usr/lib/libeatmydata' LD_PRELOAD='libeatmydata.so' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='39400' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.FjmGSJqM/pbuilderrc_v0SP --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.FjmGSJqM/b1 --logfile b1/build.log libpam-x2go_0.0.2.0-3.1.dsc' SUDO_GID='112' SUDO_UID='107' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://213.165.73.152:3128' I: uname -a Linux ionos6-i386 6.1.0-26-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.112-1 (2024-09-30) x86_64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Aug 4 2024 /bin -> usr/bin I: user script /srv/workspace/pbuilder/39400/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: i386 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper (>= 10~), dh-autoreconf, dpkg-dev (>= 1.16.1.1~), libgtest-dev, libpam0g-dev, libssh-dev, pkg-config, cdbs (>= 0.4.93~) dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19786 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper (>= 10~); however: Package debhelper is not installed. pbuilder-satisfydepends-dummy depends on dh-autoreconf; however: Package dh-autoreconf is not installed. pbuilder-satisfydepends-dummy depends on libgtest-dev; however: Package libgtest-dev is not installed. pbuilder-satisfydepends-dummy depends on libpam0g-dev; however: Package libpam0g-dev is not installed. pbuilder-satisfydepends-dummy depends on libssh-dev; however: Package libssh-dev is not installed. pbuilder-satisfydepends-dummy depends on pkg-config; however: Package pkg-config is not installed. pbuilder-satisfydepends-dummy depends on cdbs (>= 0.4.93~); however: Package cdbs is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} cdbs{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} googletest{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libcom-err2{a} libdebhelper-perl{a} libelf1t64{a} libexpat1{a} libfile-stripnondeterminism-perl{a} libgssapi-krb5-2{a} libgtest-dev{a} libicu72{a} libk5crypto3{a} libkeyutils1{a} libkrb5-3{a} libkrb5support0{a} libmagic-mgc{a} libmagic1t64{a} libnsl2{a} libpam0g-dev{a} libpipeline1{a} libpkgconf3{a} libpython3-stdlib{a} libpython3.12-minimal{a} libpython3.12-stdlib{a} libreadline8t64{a} libssh-4{a} libssh-dev{a} libssl-dev{a} libtirpc-common{a} libtirpc3t64{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} media-types{a} netbase{a} pkg-config{a} pkgconf{a} pkgconf-bin{a} po-debconf{a} python3{a} python3-minimal{a} python3-scour{a} python3.12{a} python3.12-minimal{a} readline-common{a} scour{a} sensible-utils{a} tzdata{a} zlib1g-dev{a} The following packages are RECOMMENDED but will NOT be installed: ca-certificates curl krb5-locales libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 65 newly installed, 0 to remove and 0 not upgraded. Need to get 32.6 MB of archives. After unpacking 125 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main i386 libpython3.12-minimal i386 3.12.6-1 [813 kB] Get: 2 http://deb.debian.org/debian trixie/main i386 libexpat1 i386 2.6.3-1 [107 kB] Get: 3 http://deb.debian.org/debian trixie/main i386 python3.12-minimal i386 3.12.6-1 [2242 kB] Get: 4 http://deb.debian.org/debian trixie/main i386 python3-minimal i386 3.12.6-1 [26.7 kB] Get: 5 http://deb.debian.org/debian trixie/main i386 media-types all 10.1.0 [26.9 kB] Get: 6 http://deb.debian.org/debian trixie/main i386 netbase all 6.4 [12.8 kB] Get: 7 http://deb.debian.org/debian trixie/main i386 tzdata all 2024a-4 [255 kB] Get: 8 http://deb.debian.org/debian trixie/main i386 libkrb5support0 i386 1.21.3-3 [34.9 kB] Get: 9 http://deb.debian.org/debian trixie/main i386 libcom-err2 i386 1.47.1-1 [23.1 kB] Get: 10 http://deb.debian.org/debian trixie/main i386 libk5crypto3 i386 1.21.3-3 [83.6 kB] Get: 11 http://deb.debian.org/debian trixie/main i386 libkeyutils1 i386 1.6.3-3 [9432 B] Get: 12 http://deb.debian.org/debian trixie/main i386 libkrb5-3 i386 1.21.3-3 [350 kB] Get: 13 http://deb.debian.org/debian trixie/main i386 libgssapi-krb5-2 i386 1.21.3-3 [146 kB] Get: 14 http://deb.debian.org/debian trixie/main i386 libtirpc-common all 1.3.4+ds-1.3 [10.9 kB] Get: 15 http://deb.debian.org/debian trixie/main i386 libtirpc3t64 i386 1.3.4+ds-1.3 [90.2 kB] Get: 16 http://deb.debian.org/debian trixie/main i386 libnsl2 i386 1.3.0-3+b2 [42.4 kB] Get: 17 http://deb.debian.org/debian trixie/main i386 readline-common all 8.2-5 [69.3 kB] Get: 18 http://deb.debian.org/debian trixie/main i386 libreadline8t64 i386 8.2-5 [173 kB] Get: 19 http://deb.debian.org/debian trixie/main i386 libpython3.12-stdlib i386 3.12.6-1 [1961 kB] Get: 20 http://deb.debian.org/debian trixie/main i386 python3.12 i386 3.12.6-1 [669 kB] Get: 21 http://deb.debian.org/debian trixie/main i386 libpython3-stdlib i386 3.12.6-1 [9692 B] Get: 22 http://deb.debian.org/debian trixie/main i386 python3 i386 3.12.6-1 [27.8 kB] Get: 23 http://deb.debian.org/debian trixie/main i386 sensible-utils all 0.0.24 [24.8 kB] Get: 24 http://deb.debian.org/debian trixie/main i386 libmagic-mgc i386 1:5.45-3 [314 kB] Get: 25 http://deb.debian.org/debian trixie/main i386 libmagic1t64 i386 1:5.45-3 [114 kB] Get: 26 http://deb.debian.org/debian trixie/main i386 file i386 1:5.45-3 [42.9 kB] Get: 27 http://deb.debian.org/debian trixie/main i386 gettext-base i386 0.22.5-2 [201 kB] Get: 28 http://deb.debian.org/debian trixie/main i386 libuchardet0 i386 0.0.8-1+b1 [69.1 kB] Get: 29 http://deb.debian.org/debian trixie/main i386 groff-base i386 1.23.0-5 [1196 kB] Get: 30 http://deb.debian.org/debian trixie/main i386 bsdextrautils i386 2.40.2-9 [102 kB] Get: 31 http://deb.debian.org/debian trixie/main i386 libpipeline1 i386 1.5.8-1 [41.2 kB] Get: 32 http://deb.debian.org/debian trixie/main i386 man-db i386 2.13.0-1 [1428 kB] Get: 33 http://deb.debian.org/debian trixie/main i386 m4 i386 1.4.19-4 [293 kB] Get: 34 http://deb.debian.org/debian trixie/main i386 autoconf all 2.72-3 [493 kB] Get: 35 http://deb.debian.org/debian trixie/main i386 autotools-dev all 20220109.1 [51.6 kB] Get: 36 http://deb.debian.org/debian trixie/main i386 automake all 1:1.16.5-1.3 [823 kB] Get: 37 http://deb.debian.org/debian trixie/main i386 autopoint all 0.22.5-2 [723 kB] Get: 38 http://deb.debian.org/debian trixie/main i386 python3-scour all 0.38.2-5 [55.7 kB] Get: 39 http://deb.debian.org/debian trixie/main i386 scour all 0.38.2-5 [16.3 kB] Get: 40 http://deb.debian.org/debian trixie/main i386 cdbs all 0.4.166 [47.3 kB] Get: 41 http://deb.debian.org/debian trixie/main i386 libdebhelper-perl all 13.20 [89.7 kB] Get: 42 http://deb.debian.org/debian trixie/main i386 libtool all 2.4.7-7 [517 kB] Get: 43 http://deb.debian.org/debian trixie/main i386 dh-autoreconf all 20 [17.1 kB] Get: 44 http://deb.debian.org/debian trixie/main i386 libarchive-zip-perl all 1.68-1 [104 kB] Get: 45 http://deb.debian.org/debian trixie/main i386 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get: 46 http://deb.debian.org/debian trixie/main i386 dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get: 47 http://deb.debian.org/debian trixie/main i386 libelf1t64 i386 0.191-2 [194 kB] Get: 48 http://deb.debian.org/debian trixie/main i386 dwz i386 0.15-1+b1 [116 kB] Get: 49 http://deb.debian.org/debian trixie/main i386 libicu72 i386 72.1-5 [9550 kB] Get: 50 http://deb.debian.org/debian trixie/main i386 libxml2 i386 2.12.7+dfsg+really2.9.14-0.1 [733 kB] Get: 51 http://deb.debian.org/debian trixie/main i386 gettext i386 0.22.5-2 [1631 kB] Get: 52 http://deb.debian.org/debian trixie/main i386 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 53 http://deb.debian.org/debian trixie/main i386 po-debconf all 1.0.21+nmu1 [248 kB] Get: 54 http://deb.debian.org/debian trixie/main i386 debhelper all 13.20 [915 kB] Get: 55 http://deb.debian.org/debian trixie/main i386 googletest all 1.15.2-1 [514 kB] Get: 56 http://deb.debian.org/debian trixie/main i386 libgtest-dev i386 1.15.2-1 [272 kB] Get: 57 http://deb.debian.org/debian trixie/main i386 libpam0g-dev i386 1.5.3-7 [128 kB] Get: 58 http://deb.debian.org/debian trixie/main i386 libpkgconf3 i386 1.8.1-3 [38.2 kB] Get: 59 http://deb.debian.org/debian trixie/main i386 libssh-4 i386 0.11.1-1 [228 kB] Get: 60 http://deb.debian.org/debian trixie/main i386 libssl-dev i386 3.3.2-1 [2790 kB] Get: 61 http://deb.debian.org/debian trixie/main i386 zlib1g-dev i386 1:1.3.dfsg+really1.3.1-1 [915 kB] Get: 62 http://deb.debian.org/debian trixie/main i386 libssh-dev i386 0.11.1-1 [290 kB] Get: 63 http://deb.debian.org/debian trixie/main i386 pkgconf-bin i386 1.8.1-3 [30.3 kB] Get: 64 http://deb.debian.org/debian trixie/main i386 pkgconf i386 1.8.1-3 [26.1 kB] Get: 65 http://deb.debian.org/debian trixie/main i386 pkg-config i386 1.8.1-3 [13.9 kB] Fetched 32.6 MB in 1s (36.7 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package libpython3.12-minimal:i386. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19786 files and directories currently installed.) Preparing to unpack .../libpython3.12-minimal_3.12.6-1_i386.deb ... Unpacking libpython3.12-minimal:i386 (3.12.6-1) ... Selecting previously unselected package libexpat1:i386. Preparing to unpack .../libexpat1_2.6.3-1_i386.deb ... Unpacking libexpat1:i386 (2.6.3-1) ... Selecting previously unselected package python3.12-minimal. Preparing to unpack .../python3.12-minimal_3.12.6-1_i386.deb ... Unpacking python3.12-minimal (3.12.6-1) ... Setting up libpython3.12-minimal:i386 (3.12.6-1) ... Setting up libexpat1:i386 (2.6.3-1) ... Setting up python3.12-minimal (3.12.6-1) ... Selecting previously unselected package python3-minimal. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20106 files and directories currently installed.) Preparing to unpack .../00-python3-minimal_3.12.6-1_i386.deb ... Unpacking python3-minimal (3.12.6-1) ... Selecting previously unselected package media-types. Preparing to unpack .../01-media-types_10.1.0_all.deb ... Unpacking media-types (10.1.0) ... Selecting previously unselected package netbase. Preparing to unpack .../02-netbase_6.4_all.deb ... Unpacking netbase (6.4) ... Selecting previously unselected package tzdata. Preparing to unpack .../03-tzdata_2024a-4_all.deb ... Unpacking tzdata (2024a-4) ... Selecting previously unselected package libkrb5support0:i386. Preparing to unpack .../04-libkrb5support0_1.21.3-3_i386.deb ... Unpacking libkrb5support0:i386 (1.21.3-3) ... Selecting previously unselected package libcom-err2:i386. Preparing to unpack .../05-libcom-err2_1.47.1-1_i386.deb ... Unpacking libcom-err2:i386 (1.47.1-1) ... Selecting previously unselected package libk5crypto3:i386. Preparing to unpack .../06-libk5crypto3_1.21.3-3_i386.deb ... Unpacking libk5crypto3:i386 (1.21.3-3) ... Selecting previously unselected package libkeyutils1:i386. Preparing to unpack .../07-libkeyutils1_1.6.3-3_i386.deb ... Unpacking libkeyutils1:i386 (1.6.3-3) ... Selecting previously unselected package libkrb5-3:i386. Preparing to unpack .../08-libkrb5-3_1.21.3-3_i386.deb ... Unpacking libkrb5-3:i386 (1.21.3-3) ... Selecting previously unselected package libgssapi-krb5-2:i386. Preparing to unpack .../09-libgssapi-krb5-2_1.21.3-3_i386.deb ... Unpacking libgssapi-krb5-2:i386 (1.21.3-3) ... Selecting previously unselected package libtirpc-common. Preparing to unpack .../10-libtirpc-common_1.3.4+ds-1.3_all.deb ... Unpacking libtirpc-common (1.3.4+ds-1.3) ... Selecting previously unselected package libtirpc3t64:i386. Preparing to unpack .../11-libtirpc3t64_1.3.4+ds-1.3_i386.deb ... Adding 'diversion of /lib/i386-linux-gnu/libtirpc.so.3 to /lib/i386-linux-gnu/libtirpc.so.3.usr-is-merged by libtirpc3t64' Adding 'diversion of /lib/i386-linux-gnu/libtirpc.so.3.0.0 to /lib/i386-linux-gnu/libtirpc.so.3.0.0.usr-is-merged by libtirpc3t64' Unpacking libtirpc3t64:i386 (1.3.4+ds-1.3) ... Selecting previously unselected package libnsl2:i386. Preparing to unpack .../12-libnsl2_1.3.0-3+b2_i386.deb ... Unpacking libnsl2:i386 (1.3.0-3+b2) ... Selecting previously unselected package readline-common. Preparing to unpack .../13-readline-common_8.2-5_all.deb ... Unpacking readline-common (8.2-5) ... Selecting previously unselected package libreadline8t64:i386. Preparing to unpack .../14-libreadline8t64_8.2-5_i386.deb ... Adding 'diversion of /lib/i386-linux-gnu/libhistory.so.8 to /lib/i386-linux-gnu/libhistory.so.8.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/i386-linux-gnu/libhistory.so.8.2 to /lib/i386-linux-gnu/libhistory.so.8.2.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/i386-linux-gnu/libreadline.so.8 to /lib/i386-linux-gnu/libreadline.so.8.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/i386-linux-gnu/libreadline.so.8.2 to /lib/i386-linux-gnu/libreadline.so.8.2.usr-is-merged by libreadline8t64' Unpacking libreadline8t64:i386 (8.2-5) ... Selecting previously unselected package libpython3.12-stdlib:i386. Preparing to unpack .../15-libpython3.12-stdlib_3.12.6-1_i386.deb ... Unpacking libpython3.12-stdlib:i386 (3.12.6-1) ... Selecting previously unselected package python3.12. Preparing to unpack .../16-python3.12_3.12.6-1_i386.deb ... Unpacking python3.12 (3.12.6-1) ... Selecting previously unselected package libpython3-stdlib:i386. Preparing to unpack .../17-libpython3-stdlib_3.12.6-1_i386.deb ... Unpacking libpython3-stdlib:i386 (3.12.6-1) ... Setting up python3-minimal (3.12.6-1) ... Selecting previously unselected package python3. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 21178 files and directories currently installed.) Preparing to unpack .../00-python3_3.12.6-1_i386.deb ... Unpacking python3 (3.12.6-1) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../01-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../02-libmagic-mgc_1%3a5.45-3_i386.deb ... Unpacking libmagic-mgc (1:5.45-3) ... Selecting previously unselected package libmagic1t64:i386. Preparing to unpack .../03-libmagic1t64_1%3a5.45-3_i386.deb ... Unpacking libmagic1t64:i386 (1:5.45-3) ... Selecting previously unselected package file. Preparing to unpack .../04-file_1%3a5.45-3_i386.deb ... Unpacking file (1:5.45-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../05-gettext-base_0.22.5-2_i386.deb ... Unpacking gettext-base (0.22.5-2) ... Selecting previously unselected package libuchardet0:i386. Preparing to unpack .../06-libuchardet0_0.0.8-1+b1_i386.deb ... Unpacking libuchardet0:i386 (0.0.8-1+b1) ... Selecting previously unselected package groff-base. Preparing to unpack .../07-groff-base_1.23.0-5_i386.deb ... Unpacking groff-base (1.23.0-5) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../08-bsdextrautils_2.40.2-9_i386.deb ... Unpacking bsdextrautils (2.40.2-9) ... Selecting previously unselected package libpipeline1:i386. Preparing to unpack .../09-libpipeline1_1.5.8-1_i386.deb ... Unpacking libpipeline1:i386 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../10-man-db_2.13.0-1_i386.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../11-m4_1.4.19-4_i386.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../12-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../13-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../14-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../15-autopoint_0.22.5-2_all.deb ... Unpacking autopoint (0.22.5-2) ... Selecting previously unselected package python3-scour. Preparing to unpack .../16-python3-scour_0.38.2-5_all.deb ... Unpacking python3-scour (0.38.2-5) ... Selecting previously unselected package scour. Preparing to unpack .../17-scour_0.38.2-5_all.deb ... Unpacking scour (0.38.2-5) ... Selecting previously unselected package cdbs. Preparing to unpack .../18-cdbs_0.4.166_all.deb ... Unpacking cdbs (0.4.166) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../19-libdebhelper-perl_13.20_all.deb ... Unpacking libdebhelper-perl (13.20) ... Selecting previously unselected package libtool. Preparing to unpack .../20-libtool_2.4.7-7_all.deb ... Unpacking libtool (2.4.7-7) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../21-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../22-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../23-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../24-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:i386. Preparing to unpack .../25-libelf1t64_0.191-2_i386.deb ... Unpacking libelf1t64:i386 (0.191-2) ... Selecting previously unselected package dwz. Preparing to unpack .../26-dwz_0.15-1+b1_i386.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libicu72:i386. Preparing to unpack .../27-libicu72_72.1-5_i386.deb ... Unpacking libicu72:i386 (72.1-5) ... Selecting previously unselected package libxml2:i386. Preparing to unpack .../28-libxml2_2.12.7+dfsg+really2.9.14-0.1_i386.deb ... Unpacking libxml2:i386 (2.12.7+dfsg+really2.9.14-0.1) ... Selecting previously unselected package gettext. Preparing to unpack .../29-gettext_0.22.5-2_i386.deb ... Unpacking gettext (0.22.5-2) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../30-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../31-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../32-debhelper_13.20_all.deb ... Unpacking debhelper (13.20) ... Selecting previously unselected package googletest. Preparing to unpack .../33-googletest_1.15.2-1_all.deb ... Unpacking googletest (1.15.2-1) ... Selecting previously unselected package libgtest-dev:i386. Preparing to unpack .../34-libgtest-dev_1.15.2-1_i386.deb ... Unpacking libgtest-dev:i386 (1.15.2-1) ... Selecting previously unselected package libpam0g-dev:i386. Preparing to unpack .../35-libpam0g-dev_1.5.3-7_i386.deb ... Unpacking libpam0g-dev:i386 (1.5.3-7) ... Selecting previously unselected package libpkgconf3:i386. Preparing to unpack .../36-libpkgconf3_1.8.1-3_i386.deb ... Unpacking libpkgconf3:i386 (1.8.1-3) ... Selecting previously unselected package libssh-4:i386. Preparing to unpack .../37-libssh-4_0.11.1-1_i386.deb ... Unpacking libssh-4:i386 (0.11.1-1) ... Selecting previously unselected package libssl-dev:i386. Preparing to unpack .../38-libssl-dev_3.3.2-1_i386.deb ... Unpacking libssl-dev:i386 (3.3.2-1) ... Selecting previously unselected package zlib1g-dev:i386. Preparing to unpack .../39-zlib1g-dev_1%3a1.3.dfsg+really1.3.1-1_i386.deb ... Unpacking zlib1g-dev:i386 (1:1.3.dfsg+really1.3.1-1) ... Selecting previously unselected package libssh-dev:i386. Preparing to unpack .../40-libssh-dev_0.11.1-1_i386.deb ... Unpacking libssh-dev:i386 (0.11.1-1) ... Selecting previously unselected package pkgconf-bin. Preparing to unpack .../41-pkgconf-bin_1.8.1-3_i386.deb ... Unpacking pkgconf-bin (1.8.1-3) ... Selecting previously unselected package pkgconf:i386. Preparing to unpack .../42-pkgconf_1.8.1-3_i386.deb ... Unpacking pkgconf:i386 (1.8.1-3) ... Selecting previously unselected package pkg-config:i386. Preparing to unpack .../43-pkg-config_1.8.1-3_i386.deb ... Unpacking pkg-config:i386 (1.8.1-3) ... Setting up media-types (10.1.0) ... Setting up libpipeline1:i386 (1.5.8-1) ... Setting up libkeyutils1:i386 (1.6.3-3) ... Setting up libicu72:i386 (72.1-5) ... Setting up bsdextrautils (2.40.2-9) ... Setting up libpam0g-dev:i386 (1.5.3-7) ... Setting up libmagic-mgc (1:5.45-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libtirpc-common (1.3.4+ds-1.3) ... Setting up libdebhelper-perl (13.20) ... Setting up libmagic1t64:i386 (1:5.45-3) ... Setting up gettext-base (0.22.5-2) ... Setting up m4 (1.4.19-4) ... Setting up libcom-err2:i386 (1.47.1-1) ... Setting up file (1:5.45-3) ... Setting up googletest (1.15.2-1) ... Setting up libelf1t64:i386 (0.191-2) ... Setting up libkrb5support0:i386 (1.21.3-3) ... Setting up tzdata (2024a-4) ... Current default time zone: 'Etc/UTC' Local time is now: Sat Nov 22 11:54:18 UTC 2025. Universal Time is now: Sat Nov 22 11:54:18 UTC 2025. Run 'dpkg-reconfigure tzdata' if you wish to change it. Setting up autotools-dev (20220109.1) ... Setting up libpkgconf3:i386 (1.8.1-3) ... Setting up libssl-dev:i386 (3.3.2-1) ... Setting up autopoint (0.22.5-2) ... Setting up pkgconf-bin (1.8.1-3) ... Setting up libk5crypto3:i386 (1.21.3-3) ... Setting up autoconf (2.72-3) ... Setting up zlib1g-dev:i386 (1:1.3.dfsg+really1.3.1-1) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:i386 (0.0.8-1+b1) ... Setting up netbase (6.4) ... Setting up libkrb5-3:i386 (1.21.3-3) ... Setting up readline-common (8.2-5) ... Setting up libxml2:i386 (2.12.7+dfsg+really2.9.14-0.1) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up gettext (0.22.5-2) ... Setting up libgtest-dev:i386 (1.15.2-1) ... Setting up libtool (2.4.7-7) ... Setting up pkgconf:i386 (1.8.1-3) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up libgssapi-krb5-2:i386 (1.21.3-3) ... Setting up pkg-config:i386 (1.8.1-3) ... Setting up libssh-4:i386 (0.11.1-1) ... Setting up libreadline8t64:i386 (8.2-5) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up groff-base (1.23.0-5) ... Setting up libtirpc3t64:i386 (1.3.4+ds-1.3) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up libssh-dev:i386 (0.11.1-1) ... Setting up libnsl2:i386 (1.3.0-3+b2) ... Setting up libpython3.12-stdlib:i386 (3.12.6-1) ... Setting up python3.12 (3.12.6-1) ... Setting up debhelper (13.20) ... Setting up libpython3-stdlib:i386 (3.12.6-1) ... Setting up python3 (3.12.6-1) ... Setting up python3-scour (0.38.2-5) ... Setting up scour (0.38.2-5) ... Setting up cdbs (0.4.166) ... Processing triggers for libc-bin (2.40-3) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/reproducible-path/libpam-x2go-0.0.2.0/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libpam-x2go_0.0.2.0-3.1_source.changes dpkg-buildpackage: info: source package libpam-x2go dpkg-buildpackage: info: source version 0.0.2.0-3.1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Chris Hofstaedtler dpkg-source --before-build . dpkg-buildpackage: info: host architecture i386 debian/rules clean CDBS WARNING: copyright-check disabled - touch debian/copyright_hints to enable. test -x debian/rules rm -f debian/stamp-makefile-build debian/stamp-makefile-install /usr/bin/make -C . -k distclean make[1]: Entering directory '/build/reproducible-path/libpam-x2go-0.0.2.0' make[1]: *** No rule to make target 'distclean'. make[1]: Leaving directory '/build/reproducible-path/libpam-x2go-0.0.2.0' make: [/usr/share/cdbs/1/class/makefile.mk:91: makefile-clean] Error 2 (ignored) rm -f debian/stamp-makefile-check rm -f debian/stamp-autotools rmdir --ignore-fail-on-non-empty . rmdir: failed to remove '.': Invalid argument make: [/usr/share/cdbs/1/class/autotools.mk:64: makefile-clean] Error 1 (ignored) rm -f README if test -e debian/autoreconf.before; then \ dh_autoreconf_clean ; \ fi dh_clean rm -f debian/stamp-autotools-files rm -f debian/copyright_newhints rm -f debian/cdbs-install-list debian/cdbs-package-list debian/stamp-copyright-check rm -rf "debian/upstream-cruft" rm -f debian/stamp-upstream-cruft debian/rules binary CDBS WARNING: copyright-check disabled - touch debian/copyright_hints to enable. test -x debian/rules dh_testroot dh_prep dh_installdirs -A mkdir -p "." Scanning upstream source for new/changed copyright notices... set -e; LC_ALL=C.UTF-8 /usr/bin/licensecheck --check '.*' --recursive --copyright --deb-fmt --ignore '^(debian/(changelog|copyright(|_hints|_newhints)))$' --lines 0 -- * | /usr/lib/cdbs/licensecheck2dep5 > debian/copyright_newhints /bin/sh: 1: /usr/bin/licensecheck: not found 0 combinations of copyright and licensing found. diff: debian/copyright_hints: No such file or directory No new copyright notices found - assuming no news is good news... touch debian/stamp-copyright-check touch debian/stamp-upstream-cruft cp README.md README dh_autoreconf libtoolize: putting auxiliary files in '.'. libtoolize: copying file './ltmain.sh' libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'. libtoolize: copying file 'm4/libtool.m4' libtoolize: copying file 'm4/ltoptions.m4' libtoolize: copying file 'm4/ltsugar.m4' libtoolize: copying file 'm4/ltversion.m4' libtoolize: copying file 'm4/lt~obsolete.m4' configure.ac:11: warning: The macro 'AC_PROG_LIBTOOL' is obsolete. configure.ac:11: You should run autoupdate. m4/libtool.m4:100: AC_PROG_LIBTOOL is expanded from... configure.ac:11: the top level configure.ac:8: installing './compile' configure.ac:11: installing './config.guess' configure.ac:11: installing './config.sub' configure.ac:5: installing './install-sh' configure.ac:5: installing './missing' Makefile.am: installing './INSTALL' src/Makefile.am: installing './depcomp' parallel-tests: installing './test-driver' touch debian/stamp-autotools-files chmod a+x /build/reproducible-path/libpam-x2go-0.0.2.0/./configure mkdir -p . cd . && CFLAGS="-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libpam-x2go-0.0.2.0=. -fstack-protector-strong -Wformat -Werror=format-security" CXXFLAGS="-g -O2 -ffile-prefix-map=/build/reproducible-path/libpam-x2go-0.0.2.0=. -fstack-protector-strong -Wformat -Werror=format-security" CPPFLAGS="-Wdate-time -D_FORTIFY_SOURCE=2" LDFLAGS="-Wl,-z,relro -Wl,-z,now" /build/reproducible-path/libpam-x2go-0.0.2.0/./configure --build=i686-linux-gnu --prefix=/usr --includedir="\${prefix}/include" --mandir="\${prefix}/share/man" --infodir="\${prefix}/share/info" --sysconfdir=/etc --localstatedir=/var --libexecdir="\${prefix}/lib/libpam-x2go" --srcdir=. --disable-maintainer-mode --disable-dependency-tracking --disable-silent-rules configure: WARNING: unrecognized options: --disable-maintainer-mode checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a race-free mkdir -p... /usr/bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether gcc accepts -g... yes checking for gcc option to enable C11 features... none needed checking whether gcc understands -c and -o together... yes checking whether make supports the include directive... yes (GNU style) checking dependency style of gcc... none checking for g++... g++ checking whether the compiler supports GNU C++... yes checking whether g++ accepts -g... yes checking for g++ option to enable C++11 features... none needed checking dependency style of g++... none checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /usr/bin/sed checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for fgrep... /usr/bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert i686-pc-linux-gnu file names to i686-pc-linux-gnu format... func_convert_file_noop checking how to convert i686-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for file... file checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /usr/bin/dd checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking how to run the C++ preprocessor... g++ -E checking for ld used by g++... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes checking for g++ option to produce PIC... -fPIC -DPIC checking if g++ PIC flag -fPIC -DPIC works... yes checking if g++ static flag -static works... yes checking if g++ supports -c -o file.o... yes checking if g++ supports -c -o file.o... (cached) yes checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... (cached) GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking for pam_getenv in -lpam... yes checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for libssh... yes checking for gtest/gtest.h... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating src/Makefile config.status: creating tests/Makefile config.status: creating config.h config.status: executing depfiles commands config.status: executing libtool commands configure: WARNING: unrecognized options: --disable-maintainer-mode touch debian/stamp-autotools /usr/bin/make -C . make[1]: Entering directory '/build/reproducible-path/libpam-x2go-0.0.2.0' /usr/bin/make all-recursive make[2]: Entering directory '/build/reproducible-path/libpam-x2go-0.0.2.0' Making all in src make[3]: Entering directory '/build/reproducible-path/libpam-x2go-0.0.2.0/src' gcc -DHAVE_CONFIG_H -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libpam-x2go-0.0.2.0=. -fstack-protector-strong -Wformat -Werror=format-security -c -o x2go_auth_check-x2go-auth-check.o `test -f 'x2go-auth-check.c' || echo './'`x2go-auth-check.c /bin/bash ../libtool --tag=CC --mode=link gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libpam-x2go-0.0.2.0=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -o x2go-auth-check x2go_auth_check-x2go-auth-check.o -lssh libtool: link: gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libpam-x2go-0.0.2.0=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z -Wl,relro -Wl,-z -Wl,now -o x2go-auth-check x2go_auth_check-x2go-auth-check.o -lssh /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../include -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Werror -DAUTH_CHECK="\"/usr/lib/libpam-x2go/x2go-auth-check\"" -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libpam-x2go-0.0.2.0=. -fstack-protector-strong -Wformat -Werror=format-security -c -o pam_x2go_la-auth-check-path.lo `test -f 'auth-check-path.c' || echo './'`auth-check-path.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../include -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Werror -DAUTH_CHECK=\"/usr/lib/libpam-x2go/x2go-auth-check\" -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libpam-x2go-0.0.2.0=. -fstack-protector-strong -Wformat -Werror=format-security -c auth-check-path.c -fPIC -DPIC -o .libs/pam_x2go_la-auth-check-path.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../include -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Werror -DAUTH_CHECK=\"/usr/lib/libpam-x2go/x2go-auth-check\" -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libpam-x2go-0.0.2.0=. -fstack-protector-strong -Wformat -Werror=format-security -c auth-check-path.c -o pam_x2go_la-auth-check-path.o >/dev/null 2>&1 /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../include -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Werror -DAUTH_CHECK="\"/usr/lib/libpam-x2go/x2go-auth-check\"" -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libpam-x2go-0.0.2.0=. -fstack-protector-strong -Wformat -Werror=format-security -c -o pam_x2go_la-pam-x2go.lo `test -f 'pam-x2go.c' || echo './'`pam-x2go.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../include -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Werror -DAUTH_CHECK=\"/usr/lib/libpam-x2go/x2go-auth-check\" -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libpam-x2go-0.0.2.0=. -fstack-protector-strong -Wformat -Werror=format-security -c pam-x2go.c -fPIC -DPIC -o .libs/pam_x2go_la-pam-x2go.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../include -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Werror -DAUTH_CHECK=\"/usr/lib/libpam-x2go/x2go-auth-check\" -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libpam-x2go-0.0.2.0=. -fstack-protector-strong -Wformat -Werror=format-security -c pam-x2go.c -o pam_x2go_la-pam-x2go.o >/dev/null 2>&1 /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../include -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Werror -DAUTH_CHECK="\"/usr/lib/libpam-x2go/x2go-auth-check\"" -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libpam-x2go-0.0.2.0=. -fstack-protector-strong -Wformat -Werror=format-security -c -o pam_x2go_la-pam-x2go-children.lo `test -f 'pam-x2go-children.c' || echo './'`pam-x2go-children.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../include -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Werror -DAUTH_CHECK=\"/usr/lib/libpam-x2go/x2go-auth-check\" -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libpam-x2go-0.0.2.0=. -fstack-protector-strong -Wformat -Werror=format-security -c pam-x2go-children.c -fPIC -DPIC -o .libs/pam_x2go_la-pam-x2go-children.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../include -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Werror -DAUTH_CHECK=\"/usr/lib/libpam-x2go/x2go-auth-check\" -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libpam-x2go-0.0.2.0=. -fstack-protector-strong -Wformat -Werror=format-security -c pam-x2go-children.c -o pam_x2go_la-pam-x2go-children.o >/dev/null 2>&1 /bin/bash ../libtool --tag=CC --mode=link gcc -Wall -Werror -DAUTH_CHECK="\"/usr/lib/libpam-x2go/x2go-auth-check\"" -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libpam-x2go-0.0.2.0=. -fstack-protector-strong -Wformat -Werror=format-security -no-undefined -module -avoid-version -Wl,-z,relro -Wl,-z,now -o pam_x2go.la -rpath /usr/lib/security pam_x2go_la-auth-check-path.lo pam_x2go_la-pam-x2go.lo pam_x2go_la-pam-x2go-children.lo -lpam libtool: link: gcc -shared -fPIC -DPIC .libs/pam_x2go_la-auth-check-path.o .libs/pam_x2go_la-pam-x2go.o .libs/pam_x2go_la-pam-x2go-children.o -lpam -g -O2 -fstack-protector-strong -Wl,-z -Wl,relro -Wl,-z -Wl,now -Wl,-soname -Wl,pam_x2go.so -o .libs/pam_x2go.so libtool: link: ar cr .libs/pam_x2go.a pam_x2go_la-auth-check-path.o pam_x2go_la-pam-x2go.o pam_x2go_la-pam-x2go-children.o libtool: link: ranlib .libs/pam_x2go.a libtool: link: ( cd ".libs" && rm -f "pam_x2go.la" && ln -s "../pam_x2go.la" "pam_x2go.la" ) make[3]: Leaving directory '/build/reproducible-path/libpam-x2go-0.0.2.0/src' Making all in tests make[3]: Entering directory '/build/reproducible-path/libpam-x2go-0.0.2.0/tests' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/build/reproducible-path/libpam-x2go-0.0.2.0/tests' make[3]: Entering directory '/build/reproducible-path/libpam-x2go-0.0.2.0' make[3]: Leaving directory '/build/reproducible-path/libpam-x2go-0.0.2.0' make[2]: Leaving directory '/build/reproducible-path/libpam-x2go-0.0.2.0' make[1]: Leaving directory '/build/reproducible-path/libpam-x2go-0.0.2.0' touch debian/stamp-makefile-build /usr/bin/make -C . check make[1]: Entering directory '/build/reproducible-path/libpam-x2go-0.0.2.0' Making check in src make[2]: Entering directory '/build/reproducible-path/libpam-x2go-0.0.2.0/src' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/build/reproducible-path/libpam-x2go-0.0.2.0/src' Making check in tests make[2]: Entering directory '/build/reproducible-path/libpam-x2go-0.0.2.0/tests' /usr/bin/make test-x2go-auth test-x2go-wrapper libgtest.a libgtest_main.a make[3]: Entering directory '/build/reproducible-path/libpam-x2go-0.0.2.0/tests' gcc -DHAVE_CONFIG_H -I. -I.. -I/usr/src/gtest -I../src -Wall -Werror -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -g -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libpam-x2go-0.0.2.0=. -fstack-protector-strong -Wformat -Werror=format-security -c -o test-x2go-auth.o test-x2go-auth.c /bin/bash ../libtool --tag=CC --mode=link gcc -Wall -g -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libpam-x2go-0.0.2.0=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -o test-x2go-auth test-x2go-auth.o libtool: link: gcc -Wall -g -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libpam-x2go-0.0.2.0=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z -Wl,relro -Wl,-z -Wl,now -o test-x2go-auth test-x2go-auth.o gcc -DHAVE_CONFIG_H -I. -I.. -I/usr/src/gtest -I../src -Wall -Werror -I../include -I../src -I/usr/src/gtest -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -g -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libpam-x2go-0.0.2.0=. -fstack-protector-strong -Wformat -Werror=format-security -c -o test_x2go_wrapper-mock_pam.o `test -f 'mock_pam.c' || echo './'`mock_pam.c gcc -DHAVE_CONFIG_H -I. -I.. -I/usr/src/gtest -I../src -Wall -Werror -I../include -I../src -I/usr/src/gtest -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -g -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libpam-x2go-0.0.2.0=. -fstack-protector-strong -Wformat -Werror=format-security -c -o test_x2go_wrapper-mock_guest.o `test -f 'mock_guest.c' || echo './'`mock_guest.c g++ -DHAVE_CONFIG_H -I. -I.. -I/usr/src/gtest -I../src -Wall -Werror -I../include -I../src -I/usr/src/gtest -Wdate-time -D_FORTIFY_SOURCE=2 -DAUTH_CHECK="\"/build/reproducible-path/libpam-x2go-0.0.2.0/tests/test-x2go-auth\"" -g -O2 -ffile-prefix-map=/build/reproducible-path/libpam-x2go-0.0.2.0=. -fstack-protector-strong -Wformat -Werror=format-security -c -o test_x2go_wrapper-test-x2go-wrapper.o `test -f 'test-x2go-wrapper.cc' || echo './'`test-x2go-wrapper.cc cp /usr/src/gtest/src/gtest-all.cc . g++ -DHAVE_CONFIG_H -I. -I.. -I/usr/src/gtest -w -I/usr/src/gtest -I../src -Wall -Werror -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/reproducible-path/libpam-x2go-0.0.2.0=. -fstack-protector-strong -Wformat -Werror=format-security -c -o libgtest_a-gtest-all.o `test -f 'gtest-all.cc' || echo './'`gtest-all.cc rm -f libgtest.a ar cru libgtest.a libgtest_a-gtest-all.o ar: `u' modifier ignored since `D' is the default (see `U') ranlib libgtest.a cp /usr/src/gtest/src/gtest_main.cc . g++ -DHAVE_CONFIG_H -I. -I.. -I/usr/src/gtest -w -I/usr/src/gtest -I../src -Wall -Werror -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/reproducible-path/libpam-x2go-0.0.2.0=. -fstack-protector-strong -Wformat -Werror=format-security -c -o libgtest_main_a-gtest_main.o `test -f 'gtest_main.cc' || echo './'`gtest_main.cc rm -f libgtest_main.a ar cru libgtest_main.a libgtest_main_a-gtest_main.o ar: `u' modifier ignored since `D' is the default (see `U') ranlib libgtest_main.a /bin/bash ../libtool --tag=CXX --mode=link g++ -DAUTH_CHECK="\"/build/reproducible-path/libpam-x2go-0.0.2.0/tests/test-x2go-auth\"" -g -O2 -ffile-prefix-map=/build/reproducible-path/libpam-x2go-0.0.2.0=. -fstack-protector-strong -Wformat -Werror=format-security -pthread -Wl,-z,relro -Wl,-z,now -o test-x2go-wrapper test_x2go_wrapper-mock_pam.o test_x2go_wrapper-mock_guest.o test_x2go_wrapper-test-x2go-wrapper.o libgtest.a libgtest_main.a ../src/pam_x2go.la -lssh *** Warning: Linking the executable test-x2go-wrapper against the loadable module *** pam_x2go.so is not portable! libtool: link: g++ -DAUTH_CHECK=\"/build/reproducible-path/libpam-x2go-0.0.2.0/tests/test-x2go-auth\" -g -O2 -ffile-prefix-map=/build/reproducible-path/libpam-x2go-0.0.2.0=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z -Wl,relro -Wl,-z -Wl,now -o .libs/test-x2go-wrapper test_x2go_wrapper-mock_pam.o test_x2go_wrapper-mock_guest.o test_x2go_wrapper-test-x2go-wrapper.o libgtest.a libgtest_main.a ../src/.libs/pam_x2go.so -lssh -pthread -Wl,-rpath -Wl,/usr/lib/security make[3]: 'libgtest.a' is up to date. make[3]: 'libgtest_main.a' is up to date. make[3]: Leaving directory '/build/reproducible-path/libpam-x2go-0.0.2.0/tests' /usr/bin/make check-TESTS make[3]: Entering directory '/build/reproducible-path/libpam-x2go-0.0.2.0/tests' make[4]: Entering directory '/build/reproducible-path/libpam-x2go-0.0.2.0/tests' PASS: test-x2go-wrapper ============================================================================ Testsuite summary for libpam-x2go 0.0.2.0 ============================================================================ # TOTAL: 1 # PASS: 1 # SKIP: 0 # XFAIL: 0 # FAIL: 0 # XPASS: 0 # ERROR: 0 ============================================================================ make[4]: Leaving directory '/build/reproducible-path/libpam-x2go-0.0.2.0/tests' make[3]: Leaving directory '/build/reproducible-path/libpam-x2go-0.0.2.0/tests' make[2]: Leaving directory '/build/reproducible-path/libpam-x2go-0.0.2.0/tests' make[2]: Entering directory '/build/reproducible-path/libpam-x2go-0.0.2.0' make[2]: Leaving directory '/build/reproducible-path/libpam-x2go-0.0.2.0' make[1]: Leaving directory '/build/reproducible-path/libpam-x2go-0.0.2.0' touch debian/stamp-makefile-check /usr/bin/make -C . install DESTDIR=/build/reproducible-path/libpam-x2go-0.0.2.0/debian/tmp/ make[1]: Entering directory '/build/reproducible-path/libpam-x2go-0.0.2.0' Making install in src make[2]: Entering directory '/build/reproducible-path/libpam-x2go-0.0.2.0/src' make[3]: Entering directory '/build/reproducible-path/libpam-x2go-0.0.2.0/src' /usr/bin/mkdir -p '/build/reproducible-path/libpam-x2go-0.0.2.0/debian/tmp//usr/lib/libpam-x2go' /bin/bash ../libtool --mode=install /usr/bin/install -c x2go-auth-check '/build/reproducible-path/libpam-x2go-0.0.2.0/debian/tmp//usr/lib/libpam-x2go' libtool: install: /usr/bin/install -c x2go-auth-check /build/reproducible-path/libpam-x2go-0.0.2.0/debian/tmp//usr/lib/libpam-x2go/x2go-auth-check /usr/bin/mkdir -p '/build/reproducible-path/libpam-x2go-0.0.2.0/debian/tmp//usr/include/security/' /usr/bin/install -c -m 644 ../include/pam-x2go.h '/build/reproducible-path/libpam-x2go-0.0.2.0/debian/tmp//usr/include/security/' /usr/bin/mkdir -p '/build/reproducible-path/libpam-x2go-0.0.2.0/debian/tmp//usr/lib/security' /bin/bash ../libtool --mode=install /usr/bin/install -c pam_x2go.la '/build/reproducible-path/libpam-x2go-0.0.2.0/debian/tmp//usr/lib/security' libtool: install: /usr/bin/install -c .libs/pam_x2go.so /build/reproducible-path/libpam-x2go-0.0.2.0/debian/tmp//usr/lib/security/pam_x2go.so libtool: install: /usr/bin/install -c .libs/pam_x2go.lai /build/reproducible-path/libpam-x2go-0.0.2.0/debian/tmp//usr/lib/security/pam_x2go.la libtool: install: /usr/bin/install -c .libs/pam_x2go.a /build/reproducible-path/libpam-x2go-0.0.2.0/debian/tmp//usr/lib/security/pam_x2go.a libtool: install: chmod 644 /build/reproducible-path/libpam-x2go-0.0.2.0/debian/tmp//usr/lib/security/pam_x2go.a libtool: install: ranlib /build/reproducible-path/libpam-x2go-0.0.2.0/debian/tmp//usr/lib/security/pam_x2go.a libtool: warning: remember to run 'libtool --finish /usr/lib/security' make[3]: Leaving directory '/build/reproducible-path/libpam-x2go-0.0.2.0/src' make[2]: Leaving directory '/build/reproducible-path/libpam-x2go-0.0.2.0/src' Making install in tests make[2]: Entering directory '/build/reproducible-path/libpam-x2go-0.0.2.0/tests' make[3]: Entering directory '/build/reproducible-path/libpam-x2go-0.0.2.0/tests' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/build/reproducible-path/libpam-x2go-0.0.2.0/tests' make[2]: Leaving directory '/build/reproducible-path/libpam-x2go-0.0.2.0/tests' make[2]: Entering directory '/build/reproducible-path/libpam-x2go-0.0.2.0' make[3]: Entering directory '/build/reproducible-path/libpam-x2go-0.0.2.0' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/build/reproducible-path/libpam-x2go-0.0.2.0' make[2]: Leaving directory '/build/reproducible-path/libpam-x2go-0.0.2.0' make[1]: Leaving directory '/build/reproducible-path/libpam-x2go-0.0.2.0' touch debian/stamp-makefile-install find /build/reproducible-path/libpam-x2go-0.0.2.0/debian/tmp//usr/lib/security -type f \ \( -name '*.a' -o -name '*.la' \) \ -exec rm '{}' + Adding cdbs dependencies to debian/libpam-x2go.substvars dh_installdirs -plibpam-x2go \ Adding cdbs dependencies to debian/libpam-x2go-dev.substvars dh_installdirs -plibpam-x2go-dev \ dh_installdocs -plibpam-x2go ./README ./NEWS ./AUTHORS dh_installexamples -plibpam-x2go dh_installman -plibpam-x2go dh_installinfo -plibpam-x2go dh_installmenu -plibpam-x2go dh_installcron -plibpam-x2go dh_systemd_enable -plibpam-x2go dh_installinit -plibpam-x2go dh_installdebconf -plibpam-x2go dh_installemacsen -plibpam-x2go dh_installcatalogs -plibpam-x2go dh_installpam -plibpam-x2go dh_installlogrotate -plibpam-x2go dh_installlogcheck -plibpam-x2go dh_installchangelogs -plibpam-x2go ./ChangeLog dh_installudev -plibpam-x2go dh_lintian -plibpam-x2go dh_bugfiles -plibpam-x2go dh_install -plibpam-x2go dh_systemd_start -plibpam-x2go dh_link -plibpam-x2go dh_installmime -plibpam-x2go dh_installgsettings -plibpam-x2go dh_installdocs -plibpam-x2go-dev ./README ./NEWS ./AUTHORS dh_installexamples -plibpam-x2go-dev dh_installman -plibpam-x2go-dev dh_installinfo -plibpam-x2go-dev dh_installmenu -plibpam-x2go-dev dh_installcron -plibpam-x2go-dev dh_systemd_enable -plibpam-x2go-dev dh_installinit -plibpam-x2go-dev dh_installdebconf -plibpam-x2go-dev dh_installemacsen -plibpam-x2go-dev dh_installcatalogs -plibpam-x2go-dev dh_installpam -plibpam-x2go-dev dh_installlogrotate -plibpam-x2go-dev dh_installlogcheck -plibpam-x2go-dev dh_installchangelogs -plibpam-x2go-dev ./ChangeLog dh_installudev -plibpam-x2go-dev dh_lintian -plibpam-x2go-dev dh_bugfiles -plibpam-x2go-dev dh_install -plibpam-x2go-dev dh_systemd_start -plibpam-x2go-dev dh_link -plibpam-x2go-dev dh_installmime -plibpam-x2go-dev dh_installgsettings -plibpam-x2go-dev dh_strip -plibpam-x2go dh_strip_nondeterminism -plibpam-x2go dh_compress -plibpam-x2go dh_fixperms -plibpam-x2go dh_makeshlibs -plibpam-x2go dh_strip -plibpam-x2go-dev dh_strip_nondeterminism -plibpam-x2go-dev dh_compress -plibpam-x2go-dev dh_fixperms -plibpam-x2go-dev dh_makeshlibs -plibpam-x2go-dev dh_installdeb -plibpam-x2go dh_perl -plibpam-x2go dh_shlibdeps -plibpam-x2go dh_installdeb -plibpam-x2go-dev dh_perl -plibpam-x2go-dev dh_shlibdeps -plibpam-x2go-dev dh_gencontrol -plibpam-x2go # only call dh_scour for packages in main if grep -q '^Component:[[:space:]]*main' /CurrentlyBuilding 2>/dev/null; then dh_scour -plibpam-x2go ; fi dh_md5sums -plibpam-x2go dh_builddeb -plibpam-x2go dpkg-deb: building package 'libpam-x2go' in '../libpam-x2go_0.0.2.0-3.1_i386.deb'. dpkg-deb: building package 'libpam-x2go-dbgsym' in '../libpam-x2go-dbgsym_0.0.2.0-3.1_i386.deb'. dh_gencontrol -plibpam-x2go-dev dpkg-gencontrol: warning: Depends field of package libpam-x2go-dev: substitution variable ${shlibs:Depends} used, but is not defined # only call dh_scour for packages in main if grep -q '^Component:[[:space:]]*main' /CurrentlyBuilding 2>/dev/null; then dh_scour -plibpam-x2go-dev ; fi dh_md5sums -plibpam-x2go-dev dh_builddeb -plibpam-x2go-dev dpkg-deb: building package 'libpam-x2go-dev' in '../libpam-x2go-dev_0.0.2.0-3.1_i386.deb'. dpkg-genbuildinfo --build=binary -O../libpam-x2go_0.0.2.0-3.1_i386.buildinfo dpkg-genchanges --build=binary -O../libpam-x2go_0.0.2.0-3.1_i386.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/39400 and its subdirectories I: Current time: Fri Nov 21 23:55:04 -12 2025 I: pbuilder-time-stamp: 1763812504 Sun Oct 20 05:32:11 UTC 2024 I: 1st build successful. Starting 2nd build on remote node ionos12-i386.debian.net. Sun Oct 20 05:32:11 UTC 2024 I: Preparing to do remote build '2' on ionos12-i386.debian.net. Sun Oct 20 05:34:44 UTC 2024 I: Deleting $TMPDIR on ionos12-i386.debian.net. Sun Oct 20 05:34:45 UTC 2024 I: libpam-x2go_0.0.2.0-3.1_i386.changes: Format: 1.8 Date: Sat, 25 May 2024 09:58:09 +0200 Source: libpam-x2go Binary: libpam-x2go libpam-x2go-dbgsym libpam-x2go-dev Architecture: i386 Version: 0.0.2.0-3.1 Distribution: unstable Urgency: medium Maintainer: Debian Remote Maintainers Changed-By: Chris Hofstaedtler Description: libpam-x2go - PAM Module to check credentials against X2Go servers libpam-x2go-dev - PAM Module to check credentials against X2Go servers (development Closes: 1064124 Changes: libpam-x2go (0.0.2.0-3.1) unstable; urgency=medium . * Non-maintainer upload. . [ Michael Biebl ] * Install PAM module into /usr. (Closes: #1064124) Checksums-Sha1: 391a9ae415d0b1a764510fe7ecb2e215d382631b 16260 libpam-x2go-dbgsym_0.0.2.0-3.1_i386.deb ea4565a1bcb583d45e590b6391d4ee0b475591de 11980 libpam-x2go-dev_0.0.2.0-3.1_i386.deb 10fc3a2298a5ac1f4bf5ee846845fb3a9135a098 6242 libpam-x2go_0.0.2.0-3.1_i386.buildinfo 94c58a0af78cb704aa7381c19452a82b22cd207a 18032 libpam-x2go_0.0.2.0-3.1_i386.deb Checksums-Sha256: 19abdd085672690c10c8f611f56e41c640bb02297f43012bcb1eba54a3ec1fae 16260 libpam-x2go-dbgsym_0.0.2.0-3.1_i386.deb b3972e4acd510487281fc94f43e836da4abf386ac81d25d1ee495a9af698040b 11980 libpam-x2go-dev_0.0.2.0-3.1_i386.deb 4b4f98e9471852e816b3df60bcc88a11a04610f3cd9cfa894b3302919f7091d2 6242 libpam-x2go_0.0.2.0-3.1_i386.buildinfo 044228f2836f7b111eca3f84d3dee203330cfaf0b6606d37345e520115ce4695 18032 libpam-x2go_0.0.2.0-3.1_i386.deb Files: e73900fda96d9630307058ef01363a13 16260 debug optional libpam-x2go-dbgsym_0.0.2.0-3.1_i386.deb dc39929566378a64bd5bdb1a31c3bd45 11980 libdevel optional libpam-x2go-dev_0.0.2.0-3.1_i386.deb ee736cb49442266adce048953bd16d71 6242 admin optional libpam-x2go_0.0.2.0-3.1_i386.buildinfo 0cb77ccfc235cd795c86a2f2552d4498 18032 admin optional libpam-x2go_0.0.2.0-3.1_i386.deb Sun Oct 20 05:34:46 UTC 2024 I: diffoscope 281 will be used to compare the two builds: Running as unit: rb-diffoscope-i386_6-40797.service Warning: program compiled against libxml 212 using older 209 # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.FjmGSJqM/libpam-x2go_0.0.2.0-3.1.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.FjmGSJqM/libpam-x2go_0.0.2.0-3.1.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.FjmGSJqM/libpam-x2go_0.0.2.0-3.1.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.FjmGSJqM/b1/libpam-x2go_0.0.2.0-3.1_i386.changes /srv/reproducible-results/rbuild-debian/r-b-build.FjmGSJqM/b2/libpam-x2go_0.0.2.0-3.1_i386.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.424s) 0.424s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.020s) 0.020s 12 calls diffoscope.comparators.binary.FilesystemFile ## specialize (total time: 0.000s) 0.000s 1 call specialize Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 797ms CPU time consumed: 799ms Sun Oct 20 05:34:47 UTC 2024 I: diffoscope 281 found no differences in the changes files, and a .buildinfo file also exists. Sun Oct 20 05:34:47 UTC 2024 I: libpam-x2go from trixie built successfully and reproducibly on i386. Sun Oct 20 05:34:48 UTC 2024 I: Submitting .buildinfo files to external archives: Sun Oct 20 05:34:48 UTC 2024 I: Submitting 8.0K b1/libpam-x2go_0.0.2.0-3.1_i386.buildinfo.asc Sun Oct 20 05:34:49 UTC 2024 I: Submitting 8.0K b2/libpam-x2go_0.0.2.0-3.1_i386.buildinfo.asc Sun Oct 20 05:34:50 UTC 2024 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Sun Oct 20 05:34:50 UTC 2024 I: Done submitting .buildinfo files. Sun Oct 20 05:34:50 UTC 2024 I: Removing signed libpam-x2go_0.0.2.0-3.1_i386.buildinfo.asc files: removed './b1/libpam-x2go_0.0.2.0-3.1_i386.buildinfo.asc' removed './b2/libpam-x2go_0.0.2.0-3.1_i386.buildinfo.asc'