Tue Nov 26 14:58:32 UTC 2024 I: starting to build libcss-compressor-perl/trixie/i386 on jenkins on '2024-11-26 14:58' Tue Nov 26 14:58:32 UTC 2024 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/i386_11/35001/console.log Tue Nov 26 14:58:32 UTC 2024 I: Downloading source for trixie/libcss-compressor-perl=0.05-2 --2024-11-26 14:58:32-- http://deb.debian.org/debian/pool/main/libc/libcss-compressor-perl/libcss-compressor-perl_0.05-2.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2176 (2.1K) [text/prs.lines.tag] Saving to: ‘libcss-compressor-perl_0.05-2.dsc’ 0K .. 100% 278M=0s 2024-11-26 14:58:32 (278 MB/s) - ‘libcss-compressor-perl_0.05-2.dsc’ saved [2176/2176] Tue Nov 26 14:58:32 UTC 2024 I: libcss-compressor-perl_0.05-2.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: libcss-compressor-perl Binary: libcss-compressor-perl Architecture: all Version: 0.05-2 Maintainer: Debian Perl Group Uploaders: gregor herrmann Homepage: https://metacpan.org/release/CSS-Compressor Standards-Version: 4.2.1 Vcs-Browser: https://salsa.debian.org/perl-team/modules/packages/libcss-compressor-perl Vcs-Git: https://salsa.debian.org/perl-team/modules/packages/libcss-compressor-perl.git Testsuite: autopkgtest-pkg-perl Build-Depends: debhelper-compat (= 13) Build-Depends-Indep: libtest-differences-perl, perl Package-List: libcss-compressor-perl deb perl optional arch=all Checksums-Sha1: ac33fbb23a4ff761f8c32d6b60e7ceb726f75fad 19288 libcss-compressor-perl_0.05.orig.tar.gz 2cb84ef9b59de6b4c704c64d399c7a13f2696f47 2660 libcss-compressor-perl_0.05-2.debian.tar.xz Checksums-Sha256: 1aac9881a483881ca6e1343771a7d41473775deb5b1afa1267fc4158022e572c 19288 libcss-compressor-perl_0.05.orig.tar.gz eb8143b8414dbc18e9baf0535c34a1b5c6eae30ed586a810de539de9c0f3de43 2660 libcss-compressor-perl_0.05-2.debian.tar.xz Files: 0ddeb26d4c33afca88c4c7967b162599 19288 libcss-compressor-perl_0.05.orig.tar.gz a86d32e0e8b740a760e2013b43de426b 2660 libcss-compressor-perl_0.05-2.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQIzBAEBCgAdFiEEsjhixBXWVlpOhsvXV5wWDUyeI+gFAmOXYwYACgkQV5wWDUye I+j8cQ/+LJk6jpsSu6qrbU5wsKdpenVHSA3GRsaHy3Lub0BBskDQR0p7TpBQmF4a tg5esdfhtWDRup8VwIcLuYDYudR4nZQdzyD8qIsMGvl03kcAxSYxDJwn9kUfKOx2 3I0xzjmWWpEAnh26kglIJ+sBiC7rPe++4l9Qz/VhlIrZ9i4PI0rER0p9qG55VSDE u0Fz0XDDksF+4AC3bqanLYsJ9XzQuRveeU4wBZMfLm5Wgc979W7+vhodcUGLEMJU 48qwR0J6CA7jR67bRj7MbbSbaUpytjA1uTozBsYxPour8HyT0Gx8bDYr0pbdJ1ys PZW+4eSJD1zF8A50HOMY+1MmN55o6p1LULWE0BO0Ev9MpptNHKZt3H+S3U/CnQat bGHWkVQ3kqw9J5/cbXKs2C1YFXBKwGUA3+wgmR/Uch70s5NAoF6ut4h+nZ6j3Nov LQT2ABb1fmY9qLSoLAsdlhzo9D7wG6LWIVB3x3yXnP02ZAespTFa32zyGGilg8uD kv+wbnCQoPfAyGJlQhXz6DXd5V+lxT8WV+I4o6fGulzL3HDyEV1yK45LIOvHFd9o Kb1N/KhdaMii4sJwwIGLD1oFyIcJbvmEIRxa2KKp35iLKV1sita3sVSJ4hko0ZCB EFPX6qHxykJgG+TaAOsyZUTH5Dme46Oowh4ul5HfLh07jdgDNAA= =wlwS -----END PGP SIGNATURE----- Tue Nov 26 14:58:32 UTC 2024 I: Checking whether the package is not for us Tue Nov 26 14:58:32 UTC 2024 I: Starting 1st build on remote node ionos6-i386.debian.net. Tue Nov 26 14:58:32 UTC 2024 I: Preparing to do remote build '1' on ionos6-i386.debian.net. Tue Nov 26 14:58:54 UTC 2024 I: Deleting $TMPDIR on ionos6-i386.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Mon Dec 29 09:21:34 -12 2025 I: pbuilder-time-stamp: 1767043294 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: using eatmydata during job I: Copying source file I: copying [libcss-compressor-perl_0.05-2.dsc] I: copying [./libcss-compressor-perl_0.05.orig.tar.gz] I: copying [./libcss-compressor-perl_0.05-2.debian.tar.xz] I: Extracting source gpgv: Signature made Mon Dec 12 17:21:10 2022 gpgv: using RSA key B23862C415D6565A4E86CBD7579C160D4C9E23E8 gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./libcss-compressor-perl_0.05-2.dsc: no acceptable signature found dpkg-source: info: extracting libcss-compressor-perl in libcss-compressor-perl-0.05 dpkg-source: info: unpacking libcss-compressor-perl_0.05.orig.tar.gz tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'LIBARCHIVE.creationtime' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'LIBARCHIVE.creationtime' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' dpkg-source: info: unpacking libcss-compressor-perl_0.05-2.debian.tar.xz I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/40609/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='i386' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=22 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='i386' IFS=' ' INVOCATION_ID='d7c303c43f974004b569a9751dd040d6' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' LD_LIBRARY_PATH='/usr/lib/libeatmydata' LD_PRELOAD='libeatmydata.so' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='40609' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.URcUsXL4/pbuilderrc_QDk1 --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.URcUsXL4/b1 --logfile b1/build.log libcss-compressor-perl_0.05-2.dsc' SUDO_GID='112' SUDO_UID='107' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://213.165.73.152:3128' I: uname -a Linux ionos6-i386 6.1.0-28-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.119-1 (2024-11-22) x86_64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Aug 4 2024 /bin -> usr/bin I: user script /srv/workspace/pbuilder/40609/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: i386 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), libtest-differences-perl, perl dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19956 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libtest-differences-perl; however: Package libtest-differences-perl is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libalgorithm-diff-perl{a} libarchive-zip-perl{a} libcapture-tiny-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libicu72{a} libmagic-mgc{a} libmagic1t64{a} libpipeline1{a} libtest-differences-perl{a} libtext-diff-perl{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libalgorithm-diff-xs-perl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 33 newly installed, 0 to remove and 0 not upgraded. Need to get 20.2 MB of archives. After unpacking 76.1 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main i386 sensible-utils all 0.0.24 [24.8 kB] Get: 2 http://deb.debian.org/debian trixie/main i386 libmagic-mgc i386 1:5.45-3+b1 [314 kB] Get: 3 http://deb.debian.org/debian trixie/main i386 libmagic1t64 i386 1:5.45-3+b1 [115 kB] Get: 4 http://deb.debian.org/debian trixie/main i386 file i386 1:5.45-3+b1 [43.2 kB] Get: 5 http://deb.debian.org/debian trixie/main i386 gettext-base i386 0.22.5-2 [201 kB] Get: 6 http://deb.debian.org/debian trixie/main i386 libuchardet0 i386 0.0.8-1+b2 [69.2 kB] Get: 7 http://deb.debian.org/debian trixie/main i386 groff-base i386 1.23.0-5 [1196 kB] Get: 8 http://deb.debian.org/debian trixie/main i386 bsdextrautils i386 2.40.2-11 [95.6 kB] Get: 9 http://deb.debian.org/debian trixie/main i386 libpipeline1 i386 1.5.8-1 [41.2 kB] Get: 10 http://deb.debian.org/debian trixie/main i386 man-db i386 2.13.0-1 [1428 kB] Get: 11 http://deb.debian.org/debian trixie/main i386 m4 i386 1.4.19-4 [293 kB] Get: 12 http://deb.debian.org/debian trixie/main i386 autoconf all 2.72-3 [493 kB] Get: 13 http://deb.debian.org/debian trixie/main i386 autotools-dev all 20220109.1 [51.6 kB] Get: 14 http://deb.debian.org/debian trixie/main i386 automake all 1:1.16.5-1.3 [823 kB] Get: 15 http://deb.debian.org/debian trixie/main i386 autopoint all 0.22.5-2 [723 kB] Get: 16 http://deb.debian.org/debian trixie/main i386 libdebhelper-perl all 13.20 [89.7 kB] Get: 17 http://deb.debian.org/debian trixie/main i386 libtool all 2.4.7-8 [517 kB] Get: 18 http://deb.debian.org/debian trixie/main i386 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian trixie/main i386 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian trixie/main i386 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get: 21 http://deb.debian.org/debian trixie/main i386 dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get: 22 http://deb.debian.org/debian trixie/main i386 libelf1t64 i386 0.192-4 [195 kB] Get: 23 http://deb.debian.org/debian trixie/main i386 dwz i386 0.15-1+b1 [116 kB] Get: 24 http://deb.debian.org/debian trixie/main i386 libicu72 i386 72.1-5+b1 [9583 kB] Get: 25 http://deb.debian.org/debian trixie/main i386 libxml2 i386 2.12.7+dfsg+really2.9.14-0.2+b1 [734 kB] Get: 26 http://deb.debian.org/debian trixie/main i386 gettext i386 0.22.5-2 [1631 kB] Get: 27 http://deb.debian.org/debian trixie/main i386 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian trixie/main i386 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian trixie/main i386 debhelper all 13.20 [915 kB] Get: 30 http://deb.debian.org/debian trixie/main i386 libalgorithm-diff-perl all 1.201-1 [43.3 kB] Get: 31 http://deb.debian.org/debian trixie/main i386 libcapture-tiny-perl all 0.48-2 [24.6 kB] Get: 32 http://deb.debian.org/debian trixie/main i386 libtext-diff-perl all 1.45-2 [27.2 kB] Get: 33 http://deb.debian.org/debian trixie/main i386 libtest-differences-perl all 0.71-1 [17.9 kB] Fetched 20.2 MB in 0s (80.8 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19956 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3+b1_i386.deb ... Unpacking libmagic-mgc (1:5.45-3+b1) ... Selecting previously unselected package libmagic1t64:i386. Preparing to unpack .../02-libmagic1t64_1%3a5.45-3+b1_i386.deb ... Unpacking libmagic1t64:i386 (1:5.45-3+b1) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-3+b1_i386.deb ... Unpacking file (1:5.45-3+b1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.22.5-2_i386.deb ... Unpacking gettext-base (0.22.5-2) ... Selecting previously unselected package libuchardet0:i386. Preparing to unpack .../05-libuchardet0_0.0.8-1+b2_i386.deb ... Unpacking libuchardet0:i386 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-5_i386.deb ... Unpacking groff-base (1.23.0-5) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.40.2-11_i386.deb ... Unpacking bsdextrautils (2.40.2-11) ... Selecting previously unselected package libpipeline1:i386. Preparing to unpack .../08-libpipeline1_1.5.8-1_i386.deb ... Unpacking libpipeline1:i386 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.0-1_i386.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-4_i386.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.22.5-2_all.deb ... Unpacking autopoint (0.22.5-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.20_all.deb ... Unpacking libdebhelper-perl (13.20) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.4.7-8_all.deb ... Unpacking libtool (2.4.7-8) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:i386. Preparing to unpack .../21-libelf1t64_0.192-4_i386.deb ... Unpacking libelf1t64:i386 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b1_i386.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libicu72:i386. Preparing to unpack .../23-libicu72_72.1-5+b1_i386.deb ... Unpacking libicu72:i386 (72.1-5+b1) ... Selecting previously unselected package libxml2:i386. Preparing to unpack .../24-libxml2_2.12.7+dfsg+really2.9.14-0.2+b1_i386.deb ... Unpacking libxml2:i386 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.22.5-2_i386.deb ... Unpacking gettext (0.22.5-2) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.20_all.deb ... Unpacking debhelper (13.20) ... Selecting previously unselected package libalgorithm-diff-perl. Preparing to unpack .../29-libalgorithm-diff-perl_1.201-1_all.deb ... Unpacking libalgorithm-diff-perl (1.201-1) ... Selecting previously unselected package libcapture-tiny-perl. Preparing to unpack .../30-libcapture-tiny-perl_0.48-2_all.deb ... Unpacking libcapture-tiny-perl (0.48-2) ... Selecting previously unselected package libtext-diff-perl. Preparing to unpack .../31-libtext-diff-perl_1.45-2_all.deb ... Unpacking libtext-diff-perl (1.45-2) ... Selecting previously unselected package libtest-differences-perl. Preparing to unpack .../32-libtest-differences-perl_0.71-1_all.deb ... Unpacking libtest-differences-perl (0.71-1) ... Setting up libpipeline1:i386 (1.5.8-1) ... Setting up libicu72:i386 (72.1-5+b1) ... Setting up bsdextrautils (2.40.2-11) ... Setting up libmagic-mgc (1:5.45-3+b1) ... Setting up libalgorithm-diff-perl (1.201-1) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.20) ... Setting up libmagic1t64:i386 (1:5.45-3+b1) ... Setting up gettext-base (0.22.5-2) ... Setting up m4 (1.4.19-4) ... Setting up file (1:5.45-3+b1) ... Setting up libelf1t64:i386 (0.192-4) ... Setting up autotools-dev (20220109.1) ... Setting up libtext-diff-perl (1.45-2) ... Setting up autopoint (0.22.5-2) ... Setting up autoconf (2.72-3) ... Setting up libcapture-tiny-perl (0.48-2) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:i386 (0.0.8-1+b2) ... Setting up libxml2:i386 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up gettext (0.22.5-2) ... Setting up libtool (2.4.7-8) ... Setting up libtest-differences-perl (0.71-1) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up groff-base (1.23.0-5) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.20) ... Processing triggers for libc-bin (2.40-3) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.36-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/reproducible-path/libcss-compressor-perl-0.05/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libcss-compressor-perl_0.05-2_source.changes dpkg-buildpackage: info: source package libcss-compressor-perl dpkg-buildpackage: info: source version 0.05-2 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Jelmer Vernooij dpkg-source --before-build . dpkg-buildpackage: info: host architecture i386 fakeroot debian/rules clean dh clean dh_clean debian/rules build dh build dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libcss-compressor-perl-0.05=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2" "LD=i686-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libcss-compressor-perl-0.05=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for CSS::Compressor Writing MYMETA.yml and MYMETA.json dh_auto_build make -j22 make[1]: Entering directory '/build/reproducible-path/libcss-compressor-perl-0.05' cp Compressor.pm blib/lib/CSS/Compressor.pm Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libcss-compressor-perl-0.05' dh_auto_test make -j22 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libcss-compressor-perl-0.05' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/calc.t ........ 1..2 ok 1 - use CSS::Compressor; ok 2 - match ok t/inline-svg.t .. 1..3 ok 1 - use CSS::Compressor; ok 2 - match ok 3 - match ok t/load.t ........ 1..1 ok 1 - use CSS::Compressor; ok t/noflip.t ...... 1..2 ok 1 - use CSS::Compressor; ok 2 - match ok t/simple.t ...... 1..2 ok 1 - use CSS::Compressor; ok 2 - match ok t/supports.t .... 1..2 ok 1 - use CSS::Compressor; ok 2 - match ok # yui test files: /build/reproducible-path/libcss-compressor-perl-0.05/t/yui/background-position.css /build/reproducible-path/libcss-compressor-perl-0.05/t/yui/border-none.css /build/reproducible-path/libcss-compressor-perl-0.05/t/yui/box-model-hack.css /build/reproducible-path/libcss-compressor-perl-0.05/t/yui/bug2527974.css /build/reproducible-path/libcss-compressor-perl-0.05/t/yui/bug2527991.css /build/reproducible-path/libcss-compressor-perl-0.05/t/yui/bug2527998.css /build/reproducible-path/libcss-compressor-perl-0.05/t/yui/bug2528034.css /build/reproducible-path/libcss-compressor-perl-0.05/t/yui/charset-media.css /build/reproducible-path/libcss-compressor-perl-0.05/t/yui/color-simple.css /build/reproducible-path/libcss-compressor-perl-0.05/t/yui/color.css /build/reproducible-path/libcss-compressor-perl-0.05/t/yui/comment.css /build/reproducible-path/libcss-compressor-perl-0.05/t/yui/concat-charset.css /build/reproducible-path/libcss-compressor-perl-0.05/t/yui/decimals.css /build/reproducible-path/libcss-compressor-perl-0.05/t/yui/dollar-header.css /build/reproducible-path/libcss-compressor-perl-0.05/t/yui/font-face.css /build/reproducible-path/libcss-compressor-perl-0.05/t/yui/ie5mac.css /build/reproducible-path/libcss-compressor-perl-0.05/t/yui/media-empty-class.css /build/reproducible-path/libcss-compressor-perl-0.05/t/yui/media-multi.css /build/reproducible-path/libcss-compressor-perl-0.05/t/yui/media-test.css /build/reproducible-path/libcss-compressor-perl-0.05/t/yui/opacity-filter.css /build/reproducible-path/libcss-compressor-perl-0.05/t/yui/preserve-case.css /build/reproducible-path/libcss-compressor-perl-0.05/t/yui/preserve-new-line.css /build/reproducible-path/libcss-compressor-perl-0.05/t/yui/preserve-strings.css /build/reproducible-path/libcss-compressor-perl-0.05/t/yui/pseudo-first.css /build/reproducible-path/libcss-compressor-perl-0.05/t/yui/pseudo.css /build/reproducible-path/libcss-compressor-perl-0.05/t/yui/special-comments.css /build/reproducible-path/libcss-compressor-perl-0.05/t/yui/star-underscore-hacks.css /build/reproducible-path/libcss-compressor-perl-0.05/t/yui/string-in-comment.css /build/reproducible-path/libcss-compressor-perl-0.05/t/yui/webkit-transform.css /build/reproducible-path/libcss-compressor-perl-0.05/t/yui/zeros.css t/yui.t ......... 1..31 ok 1 - use CSS::Compressor; ok 2 - css_compress(background-position.css) == background-position.css.min ok 3 - css_compress(border-none.css) == border-none.css.min ok 4 - css_compress(box-model-hack.css) == box-model-hack.css.min ok 5 - css_compress(bug2527974.css) == bug2527974.css.min ok 6 - css_compress(bug2527991.css) == bug2527991.css.min ok 7 - css_compress(bug2527998.css) == bug2527998.css.min ok 8 - css_compress(bug2528034.css) == bug2528034.css.min ok 9 - css_compress(charset-media.css) == charset-media.css.min ok 10 - css_compress(color-simple.css) == color-simple.css.min ok 11 - css_compress(color.css) == color.css.min ok 12 - css_compress(comment.css) == comment.css.min ok 13 - css_compress(concat-charset.css) == concat-charset.css.min ok 14 - css_compress(decimals.css) == decimals.css.min ok 15 - css_compress(dollar-header.css) == dollar-header.css.min ok 16 - css_compress(font-face.css) == font-face.css.min ok 17 - css_compress(ie5mac.css) == ie5mac.css.min ok 18 - css_compress(media-empty-class.css) == media-empty-class.css.min ok 19 - css_compress(media-multi.css) == media-multi.css.min ok 20 - css_compress(media-test.css) == media-test.css.min ok 21 - css_compress(opacity-filter.css) == opacity-filter.css.min ok 22 - css_compress(preserve-case.css) == preserve-case.css.min ok 23 - css_compress(preserve-new-line.css) == preserve-new-line.css.min ok 24 - css_compress(preserve-strings.css) == preserve-strings.css.min ok 25 - css_compress(pseudo-first.css) == pseudo-first.css.min ok 26 - css_compress(pseudo.css) == pseudo.css.min ok 27 - css_compress(special-comments.css) == special-comments.css.min ok 28 - css_compress(star-underscore-hacks.css) == star-underscore-hacks.css.min ok 29 - css_compress(string-in-comment.css) == string-in-comment.css.min ok 30 - css_compress(webkit-transform.css) == webkit-transform.css.min ok 31 - css_compress(zeros.css) == zeros.css.min ok All tests successful. Files=7, Tests=43, 1 wallclock secs ( 0.02 usr 0.00 sys + 0.38 cusr 0.08 csys = 0.48 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libcss-compressor-perl-0.05' create-stamp debian/debhelper-build-stamp fakeroot debian/rules binary dh binary dh_testroot dh_prep dh_auto_install --destdir=debian/libcss-compressor-perl/ make -j22 install DESTDIR=/build/reproducible-path/libcss-compressor-perl-0.05/debian/libcss-compressor-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libcss-compressor-perl-0.05' Manifying 1 pod document Installing /build/reproducible-path/libcss-compressor-perl-0.05/debian/libcss-compressor-perl/usr/share/perl5/CSS/Compressor.pm Installing /build/reproducible-path/libcss-compressor-perl-0.05/debian/libcss-compressor-perl/usr/share/man/man3/CSS::Compressor.3pm make[1]: Leaving directory '/build/reproducible-path/libcss-compressor-perl-0.05' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libcss-compressor-perl' in '../libcss-compressor-perl_0.05-2_all.deb'. dpkg-genbuildinfo --build=binary -O../libcss-compressor-perl_0.05-2_i386.buildinfo dpkg-genchanges --build=binary -O../libcss-compressor-perl_0.05-2_i386.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/40609 and its subdirectories I: Current time: Mon Dec 29 09:21:53 -12 2025 I: pbuilder-time-stamp: 1767043313 Tue Nov 26 14:58:55 UTC 2024 I: 1st build successful. Starting 2nd build on remote node ionos2-i386.debian.net. Tue Nov 26 14:58:55 UTC 2024 I: Preparing to do remote build '2' on ionos2-i386.debian.net. Tue Nov 26 14:59:26 UTC 2024 I: Deleting $TMPDIR on ionos2-i386.debian.net. Tue Nov 26 14:59:27 UTC 2024 I: libcss-compressor-perl_0.05-2_i386.changes: Format: 1.8 Date: Mon, 12 Dec 2022 17:20:09 +0000 Source: libcss-compressor-perl Binary: libcss-compressor-perl Architecture: all Version: 0.05-2 Distribution: unstable Urgency: medium Maintainer: Debian Perl Group Changed-By: Jelmer Vernooij Description: libcss-compressor-perl - Perl extension for CSS minification Changes: libcss-compressor-perl (0.05-2) unstable; urgency=medium . [ gregor herrmann ] * debian/watch: use uscan version 4. . [ Debian Janitor ] * Bump debhelper from old 10 to 12. * Set debhelper-compat version in Build-Depends. * Set upstream metadata fields: Bug-Submit, Repository-Browse. * Remove obsolete fields Contact, Name from debian/upstream/metadata (already present in machine-readable debian/copyright). * Bump debhelper from old 12 to 13. Checksums-Sha1: b702eb719a8e1bfa8890f6f461921f5abbb10181 9104 libcss-compressor-perl_0.05-2_all.deb d2af0685a4c15c783abaddcb356e9fd9ceba463f 4828 libcss-compressor-perl_0.05-2_i386.buildinfo Checksums-Sha256: af1889073fdd91b1649d48c2765024fae627efb8d418e45e60946368194f6ca0 9104 libcss-compressor-perl_0.05-2_all.deb f0a7ddc161440277050aa64effcd31fbdbe9e43393cf02c4cd48c1b4f6724048 4828 libcss-compressor-perl_0.05-2_i386.buildinfo Files: ed2484a1543ccaf0fc822d81650a38d0 9104 perl optional libcss-compressor-perl_0.05-2_all.deb fce24056e2251b88fe29db77ecc21dbc 4828 perl optional libcss-compressor-perl_0.05-2_i386.buildinfo Tue Nov 26 14:59:28 UTC 2024 I: diffoscope 283 will be used to compare the two builds: Running as unit: rb-diffoscope-i386_11-35001.service # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.URcUsXL4/libcss-compressor-perl_0.05-2.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.URcUsXL4/libcss-compressor-perl_0.05-2.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.URcUsXL4/libcss-compressor-perl_0.05-2.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.URcUsXL4/b1/libcss-compressor-perl_0.05-2_i386.changes /srv/reproducible-results/rbuild-debian/r-b-build.URcUsXL4/b2/libcss-compressor-perl_0.05-2_i386.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.497s) 0.497s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.016s) 0.016s 12 calls diffoscope.comparators.binary.FilesystemFile ## specialize (total time: 0.000s) 0.000s 1 call specialize Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 997ms CPU time consumed: 978ms Tue Nov 26 14:59:29 UTC 2024 I: diffoscope 283 found no differences in the changes files, and a .buildinfo file also exists. Tue Nov 26 14:59:29 UTC 2024 I: libcss-compressor-perl from trixie built successfully and reproducibly on i386. Tue Nov 26 14:59:30 UTC 2024 I: Submitting .buildinfo files to external archives: Tue Nov 26 14:59:30 UTC 2024 I: Submitting 8.0K b1/libcss-compressor-perl_0.05-2_i386.buildinfo.asc Tue Nov 26 14:59:32 UTC 2024 I: Submitting 8.0K b2/libcss-compressor-perl_0.05-2_i386.buildinfo.asc Tue Nov 26 14:59:33 UTC 2024 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Tue Nov 26 14:59:33 UTC 2024 I: Done submitting .buildinfo files. Tue Nov 26 14:59:33 UTC 2024 I: Removing signed libcss-compressor-perl_0.05-2_i386.buildinfo.asc files: removed './b1/libcss-compressor-perl_0.05-2_i386.buildinfo.asc' removed './b2/libcss-compressor-perl_0.05-2_i386.buildinfo.asc'