Thu Apr 18 14:00:58 UTC 2024 I: starting to build jigit/trixie/i386 on jenkins on '2024-04-18 14:00' Thu Apr 18 14:00:58 UTC 2024 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/i386_12/7986/console.log Thu Apr 18 14:00:58 UTC 2024 I: Downloading source for trixie/jigit=1.22-4 --2024-04-18 14:00:59-- http://deb.debian.org/debian/pool/main/j/jigit/jigit_1.22-4.dsc Connecting to 78.137.99.97:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 1832 (1.8K) [text/prs.lines.tag] Saving to: ‘jigit_1.22-4.dsc’ 0K . 100% 229M=0s 2024-04-18 14:00:59 (229 MB/s) - ‘jigit_1.22-4.dsc’ saved [1832/1832] Thu Apr 18 14:00:59 UTC 2024 I: jigit_1.22-4.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Format: 3.0 (quilt) Source: jigit Binary: jigit, libjte2, libjte-dev Architecture: any Version: 1.22-4 Maintainer: Steve McIntyre <93sam@debian.org> Homepage: https://www.einval.com/~steve/software/JTE/ Standards-Version: 4.3.0 Build-Depends: debhelper (>= 10), zlib1g-dev, libbz2-dev Package-List: jigit deb utils optional arch=any libjte-dev deb libdevel optional arch=any libjte2 deb libs optional arch=any Checksums-Sha1: 4be1474a9493271f5a1fb99a2dae050338d72c83 307884 jigit_1.22.orig.tar.xz ef096b64f984eb62265a562202e9d728e1d2ccd8 4928 jigit_1.22-4.debian.tar.xz Checksums-Sha256: 8a1da3fb7b817174c6c19d71ede19a4b8d0ae433fc5e967d33abf74b545f9954 307884 jigit_1.22.orig.tar.xz 39f28c6967746d787153e1e057fd0bc6be2e90e75eb585309181c9debd16e275 4928 jigit_1.22-4.debian.tar.xz Files: faea58b814646ab06f11b33555fe30f2 307884 jigit_1.22.orig.tar.xz a3f1888a3b58a9ce5521a32074f7ca16 4928 jigit_1.22-4.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQJFBAEBCAAvFiEEzrtSMB1hfpEDkP4WWHl5VzRCaE4FAmTMHT8RHDkzc2FtQGRl Ymlhbi5vcmcACgkQWHl5VzRCaE7B7xAAoaGzd1jY0hyKPj0lOVDudw4NY3IONZVy H0KJYQ+EFVLg8xthNt+DX8SkwYDdGfHESKJBVQY+rrlt/hAjWR5oVLvUcNQRkyuF 7hi8Wjz9Ou1Yp4uy2/I4Xkmv1nr5xvpTcQ5USYZCMR4Toz/TbdTg5skAjLzFRpSa ErBxH9mwMD4aYbs1ZvuiVfZv0eDXC3V4LYIUJxEvoE/AQqQ64pbGXqMGG8Bj0ZkO ea5/40gZit7Mqjm/hTrhGlkOw/zLPINaYvHE1jD9D+ChoBKBzj5km50ASMjnn8Vj Hci7ffqkpTm0RewkmBDVs4QE0e3BpKnbpeshw/59V1dvWvP9jHldTxbegePLWLO3 qUuYdhK32XyG/LHnOhkP2lo/+fxXluT4qOkae6RK6QpdikeKsiKf5qmRv0QGreqK TsrTGjWHODhYAIN/ulgb8xfSRIBTOs+Y0M1bexG5dVg00K2pXmRe7sWaBq5KtaeM 67NQ+xH7H1e1CkMImoavclQWRNMEUH/kC8x2cY/AfrJ+b7PcQ+oAGbrma7KGTfzT 8abMUkNPSxPX6a9EWUZ1wv08hgTSbkF0QgMoGSYNzBMTYC1RqzJ6h9dcmh8RkOJR ba2wj4flTzvRinXm1pDsZ3ujdkqdcxfyKN8kP2FA6KKSFrPhcXcuxl4azwBsazDj VhpVi9ZdWbk= =9RpY -----END PGP SIGNATURE----- Thu Apr 18 14:00:59 UTC 2024 I: Checking whether the package is not for us Thu Apr 18 14:00:59 UTC 2024 I: Starting 1st build on remote node ionos12-i386.debian.net. Thu Apr 18 14:00:59 UTC 2024 I: Preparing to do remote build '1' on ionos12-i386.debian.net. Thu Apr 18 14:02:10 UTC 2024 I: Deleting $TMPDIR on ionos12-i386.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Thu Apr 18 02:01:00 -12 2024 I: pbuilder-time-stamp: 1713448860 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: using eatmydata during job I: Copying source file I: copying [jigit_1.22-4.dsc] I: copying [./jigit_1.22.orig.tar.xz] I: copying [./jigit_1.22-4.debian.tar.xz] I: Extracting source gpgv: Signature made Thu Aug 3 21:33:51 2023 gpgv: using RSA key CEBB52301D617E910390FE16587979573442684E gpgv: issuer "93sam@debian.org" gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./jigit_1.22-4.dsc: no acceptable signature found dpkg-source: info: extracting jigit in jigit-1.22 dpkg-source: info: unpacking jigit_1.22.orig.tar.xz dpkg-source: info: unpacking jigit_1.22-4.debian.tar.xz I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/59427/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='i386' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=11 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='i386' IFS=' ' INVOCATION_ID='f66210fbdb5b41d0a000a124a826a1e0' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' LD_LIBRARY_PATH='/usr/lib/libeatmydata' LD_PRELOAD='libeatmydata.so' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='59427' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.x1dEW9vj/pbuilderrc_AMi1 --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.x1dEW9vj/b1 --logfile b1/build.log jigit_1.22-4.dsc' SUDO_GID='112' SUDO_UID='107' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://78.137.99.97:3128' I: uname -a Linux ionos12-i386 6.1.0-20-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.85-1 (2024-04-11) x86_64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Apr 16 11:24 /bin -> usr/bin I: user script /srv/workspace/pbuilder/59427/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: i386 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper (>= 10), zlib1g-dev, libbz2-dev dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19874 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper (>= 10); however: Package debhelper is not installed. pbuilder-satisfydepends-dummy depends on zlib1g-dev; however: Package zlib1g-dev is not installed. pbuilder-satisfydepends-dummy depends on libbz2-dev; however: Package libbz2-dev is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libbz2-dev{a} libdebhelper-perl{a} libelf1{a} libfile-stripnondeterminism-perl{a} libicu72{a} libmagic-mgc{a} libmagic1{a} libpipeline1{a} libsub-override-perl{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} zlib1g-dev{a} The following packages are RECOMMENDED but will NOT be installed: bzip2-doc curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 32 newly installed, 0 to remove and 0 not upgraded. Need to get 20.2 MB of archives. After unpacking 75.0 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main i386 sensible-utils all 0.0.22 [22.4 kB] Get: 2 http://deb.debian.org/debian trixie/main i386 libmagic-mgc i386 1:5.45-2+b1 [314 kB] Get: 3 http://deb.debian.org/debian trixie/main i386 libmagic1 i386 1:5.45-2+b1 [114 kB] Get: 4 http://deb.debian.org/debian trixie/main i386 file i386 1:5.45-2+b1 [43.0 kB] Get: 5 http://deb.debian.org/debian trixie/main i386 gettext-base i386 0.21-14+b1 [162 kB] Get: 6 http://deb.debian.org/debian trixie/main i386 libuchardet0 i386 0.0.8-1+b1 [69.1 kB] Get: 7 http://deb.debian.org/debian trixie/main i386 groff-base i386 1.23.0-3 [1195 kB] Get: 8 http://deb.debian.org/debian trixie/main i386 bsdextrautils i386 2.39.3-6 [93.3 kB] Get: 9 http://deb.debian.org/debian trixie/main i386 libpipeline1 i386 1.5.7-2 [39.7 kB] Get: 10 http://deb.debian.org/debian trixie/main i386 man-db i386 2.12.0-3 [1413 kB] Get: 11 http://deb.debian.org/debian trixie/main i386 m4 i386 1.4.19-4 [293 kB] Get: 12 http://deb.debian.org/debian trixie/main i386 autoconf all 2.71-3 [332 kB] Get: 13 http://deb.debian.org/debian trixie/main i386 autotools-dev all 20220109.1 [51.6 kB] Get: 14 http://deb.debian.org/debian trixie/main i386 automake all 1:1.16.5-1.3 [823 kB] Get: 15 http://deb.debian.org/debian trixie/main i386 autopoint all 0.21-14 [496 kB] Get: 16 http://deb.debian.org/debian trixie/main i386 libdebhelper-perl all 13.15.3 [88.0 kB] Get: 17 http://deb.debian.org/debian trixie/main i386 libtool all 2.4.7-7 [517 kB] Get: 18 http://deb.debian.org/debian trixie/main i386 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian trixie/main i386 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian trixie/main i386 libsub-override-perl all 0.10-1 [10.6 kB] Get: 21 http://deb.debian.org/debian trixie/main i386 libfile-stripnondeterminism-perl all 1.13.1-1 [19.4 kB] Get: 22 http://deb.debian.org/debian trixie/main i386 dh-strip-nondeterminism all 1.13.1-1 [8620 B] Get: 23 http://deb.debian.org/debian trixie/main i386 libelf1 i386 0.190-1+b1 [182 kB] Get: 24 http://deb.debian.org/debian trixie/main i386 dwz i386 0.15-1 [118 kB] Get: 25 http://deb.debian.org/debian trixie/main i386 libicu72 i386 72.1-4+b1 [9549 kB] Get: 26 http://deb.debian.org/debian trixie/main i386 libxml2 i386 2.9.14+dfsg-1.3+b2 [727 kB] Get: 27 http://deb.debian.org/debian trixie/main i386 gettext i386 0.21-14+b1 [1311 kB] Get: 28 http://deb.debian.org/debian trixie/main i386 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 29 http://deb.debian.org/debian trixie/main i386 po-debconf all 1.0.21+nmu1 [248 kB] Get: 30 http://deb.debian.org/debian trixie/main i386 debhelper all 13.15.3 [901 kB] Get: 31 http://deb.debian.org/debian trixie/main i386 libbz2-dev i386 1.0.8-5.1 [31.4 kB] Get: 32 http://deb.debian.org/debian trixie/main i386 zlib1g-dev i386 1:1.3.dfsg-3+b1 [915 kB] Fetched 20.2 MB in 1s (19.0 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19874 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.22_all.deb ... Unpacking sensible-utils (0.0.22) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-2+b1_i386.deb ... Unpacking libmagic-mgc (1:5.45-2+b1) ... Selecting previously unselected package libmagic1:i386. Preparing to unpack .../02-libmagic1_1%3a5.45-2+b1_i386.deb ... Unpacking libmagic1:i386 (1:5.45-2+b1) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-2+b1_i386.deb ... Unpacking file (1:5.45-2+b1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.21-14+b1_i386.deb ... Unpacking gettext-base (0.21-14+b1) ... Selecting previously unselected package libuchardet0:i386. Preparing to unpack .../05-libuchardet0_0.0.8-1+b1_i386.deb ... Unpacking libuchardet0:i386 (0.0.8-1+b1) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-3_i386.deb ... Unpacking groff-base (1.23.0-3) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.39.3-6_i386.deb ... Unpacking bsdextrautils (2.39.3-6) ... Selecting previously unselected package libpipeline1:i386. Preparing to unpack .../08-libpipeline1_1.5.7-2_i386.deb ... Unpacking libpipeline1:i386 (1.5.7-2) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.12.0-3_i386.deb ... Unpacking man-db (2.12.0-3) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-4_i386.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.71-3_all.deb ... Unpacking autoconf (2.71-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.21-14_all.deb ... Unpacking autopoint (0.21-14) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.15.3_all.deb ... Unpacking libdebhelper-perl (13.15.3) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.4.7-7_all.deb ... Unpacking libtool (2.4.7-7) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libsub-override-perl. Preparing to unpack .../19-libsub-override-perl_0.10-1_all.deb ... Unpacking libsub-override-perl (0.10-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../20-libfile-stripnondeterminism-perl_1.13.1-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.13.1-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../21-dh-strip-nondeterminism_1.13.1-1_all.deb ... Unpacking dh-strip-nondeterminism (1.13.1-1) ... Selecting previously unselected package libelf1:i386. Preparing to unpack .../22-libelf1_0.190-1+b1_i386.deb ... Unpacking libelf1:i386 (0.190-1+b1) ... Selecting previously unselected package dwz. Preparing to unpack .../23-dwz_0.15-1_i386.deb ... Unpacking dwz (0.15-1) ... Selecting previously unselected package libicu72:i386. Preparing to unpack .../24-libicu72_72.1-4+b1_i386.deb ... Unpacking libicu72:i386 (72.1-4+b1) ... Selecting previously unselected package libxml2:i386. Preparing to unpack .../25-libxml2_2.9.14+dfsg-1.3+b2_i386.deb ... Unpacking libxml2:i386 (2.9.14+dfsg-1.3+b2) ... Selecting previously unselected package gettext. Preparing to unpack .../26-gettext_0.21-14+b1_i386.deb ... Unpacking gettext (0.21-14+b1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../27-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../28-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../29-debhelper_13.15.3_all.deb ... Unpacking debhelper (13.15.3) ... Selecting previously unselected package libbz2-dev:i386. Preparing to unpack .../30-libbz2-dev_1.0.8-5.1_i386.deb ... Unpacking libbz2-dev:i386 (1.0.8-5.1) ... Selecting previously unselected package zlib1g-dev:i386. Preparing to unpack .../31-zlib1g-dev_1%3a1.3.dfsg-3+b1_i386.deb ... Unpacking zlib1g-dev:i386 (1:1.3.dfsg-3+b1) ... Setting up libpipeline1:i386 (1.5.7-2) ... Setting up libicu72:i386 (72.1-4+b1) ... Setting up bsdextrautils (2.39.3-6) ... Setting up libmagic-mgc (1:5.45-2+b1) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.15.3) ... Setting up libmagic1:i386 (1:5.45-2+b1) ... Setting up gettext-base (0.21-14+b1) ... Setting up m4 (1.4.19-4) ... Setting up file (1:5.45-2+b1) ... Setting up autotools-dev (20220109.1) ... Setting up autopoint (0.21-14) ... Setting up autoconf (2.71-3) ... Setting up zlib1g-dev:i386 (1:1.3.dfsg-3+b1) ... Setting up sensible-utils (0.0.22) ... Setting up libuchardet0:i386 (0.0.8-1+b1) ... Setting up libsub-override-perl (0.10-1) ... Setting up libelf1:i386 (0.190-1+b1) ... Setting up libxml2:i386 (2.9.14+dfsg-1.3+b2) ... Setting up libbz2-dev:i386 (1.0.8-5.1) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.13.1-1) ... Setting up gettext (0.21-14+b1) ... Setting up libtool (2.4.7-7) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.13.1-1) ... Setting up dwz (0.15-1) ... Setting up groff-base (1.23.0-3) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.12.0-3) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.15.3) ... Processing triggers for libc-bin (2.37-15) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.33-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/reproducible-path/jigit-1.22/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../jigit_1.22-4_source.changes dpkg-buildpackage: info: source package jigit dpkg-buildpackage: info: source version 1.22-4 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Steve McIntyre <93sam@debian.org> dpkg-source --before-build . dpkg-buildpackage: info: host architecture i386 fakeroot debian/rules clean dh_testdir dh_testroot rm -f build-stamp # Add here commands to clean up after the build process. /usr/bin/make clean make[1]: Entering directory '/build/reproducible-path/jigit-1.22' rm -f *.o jigdump jigit-mkimage jigsum jigsum-sha256 rsyncsum lib extract-data parallel-sums *~ build-stamp make -C libjte clean make[2]: Entering directory '/build/reproducible-path/jigit-1.22/libjte' make[2]: *** No rule to make target 'clean'. Stop. make[2]: Leaving directory '/build/reproducible-path/jigit-1.22/libjte' make[1]: [Makefile:40: clean] Error 2 (ignored) make[1]: Leaving directory '/build/reproducible-path/jigit-1.22' /usr/bin/make distclean make[1]: Entering directory '/build/reproducible-path/jigit-1.22' rm -f *.o jigdump jigit-mkimage jigsum jigsum-sha256 rsyncsum lib extract-data parallel-sums *~ build-stamp make -C libjte clean make[2]: Entering directory '/build/reproducible-path/jigit-1.22/libjte' make[2]: *** No rule to make target 'clean'. Stop. make[2]: Leaving directory '/build/reproducible-path/jigit-1.22/libjte' make[1]: [Makefile:40: clean] Error 2 (ignored) make -C libjte distclean make[2]: Entering directory '/build/reproducible-path/jigit-1.22/libjte' make[2]: *** No rule to make target 'distclean'. Stop. make[2]: Leaving directory '/build/reproducible-path/jigit-1.22/libjte' make[1]: [Makefile:43: distclean] Error 2 (ignored) make[1]: Leaving directory '/build/reproducible-path/jigit-1.22' dh_autoreconf_clean dh_clean debian/rules build dh_testdir # Add here commands to compile the package. AUTOMAKE='automake --foreign' dh_autoreconf libtoolize: putting auxiliary files in '.'. libtoolize: copying file './ltmain.sh' libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, './'. libtoolize: copying file './/libtool.m4' libtoolize: copying file './/ltoptions.m4' libtoolize: copying file './/ltsugar.m4' libtoolize: copying file './/ltversion.m4' libtoolize: copying file './/lt~obsolete.m4' configure.ac:68: warning: The macro `AC_PROG_LIBTOOL' is obsolete. configure.ac:68: You should run autoupdate. libtool.m4:100: AC_PROG_LIBTOOL is expanded from... configure.ac:68: the top level configure.ac:156: warning: The macro `AC_TRY_LINK' is obsolete. configure.ac:156: You should run autoupdate. ./lib/autoconf/general.m4:2920: AC_TRY_LINK is expanded from... acinclude.m4:43: LIBJTE_ASSERT_VERS_LIBS is expanded from... configure.ac:156: the top level configure.ac:183: warning: AC_C_BIGENDIAN should be used with AC_CONFIG_HEADERS configure.ac:55: installing './compile' configure.ac:16: installing './missing' Makefile.am: installing './depcomp' dh_auto_configure --sourcedirectory libjte cd libjte && ./configure --build=i686-linux-gnu --prefix=/usr --includedir=\${prefix}/include --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info --sysconfdir=/etc --localstatedir=/var --disable-option-checking --disable-silent-rules --libdir=\${prefix}/lib/i386-linux-gnu --libexecdir=\${prefix}/lib/i386-linux-gnu --disable-maintainer-mode --disable-dependency-tracking checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking target system type... i686-pc-linux-gnu checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a race-free mkdir -p... /usr/bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether to enable maintainer-specific portions of Makefiles... no checking whether make supports the include directive... yes (GNU style) checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether gcc accepts -g... yes checking for gcc option to enable C11 features... none needed checking whether gcc understands -c and -o together... yes checking dependency style of gcc... none checking for an ANSI C-conforming const... yes checking for inline... inline checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking whether byte ordering is bigendian... no checking for special C compiler options needed for large files... no checking for _FILE_OFFSET_BITS value needed for large files... 64 checking for _LARGEFILE_SOURCE value needed for large files... no checking for fseeko... yes checking how to print strings... printf checking for a sed that does not truncate output... /usr/bin/sed checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for fgrep... /usr/bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert i686-pc-linux-gnu file names to i686-pc-linux-gnu format... func_convert_file_noop checking how to convert i686-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for file... file checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /usr/bin/dd checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for fcntl.h... yes checking for inttypes.h... (cached) yes checking for limits.h... yes checking for stddef.h... yes checking for stdint.h... (cached) yes checking for stdlib.h... (cached) yes checking for string.h... (cached) yes checking for unistd.h... (cached) yes checking for int16_t... yes checking for int32_t... yes checking for int8_t... yes checking for off_t... yes checking for size_t... yes checking for uint16_t... yes checking for uint32_t... yes checking for uint64_t... yes checking for uint8_t... yes checking for GNU libc compatible malloc... yes checking for memset... yes checking for regcomp... yes checking for strcasecmp... yes checking for strdup... yes checking for strerror... yes checking for strncasecmp... yes checking for strndup... yes checking for strstr... yes checking target operating system... linux checking for overridden pkgconfig directory path... no checking for bzlib.h... yes checking for BZ2_bzCompressInit in -lbz2... yes checking for pthread.h... yes checking for pthread_create in -lpthread... yes enabled strict symbol encapsulation checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating version.h config.status: creating libjte-2.pc config.status: executing depfiles commands config.status: executing libtool commands /usr/bin/make CC=i686-linux-gnu-gcc make[1]: Entering directory '/build/reproducible-path/jigit-1.22' i686-linux-gnu-gcc -g -O2 -ffile-prefix-map=/build/reproducible-path/jigit-1.22=. -fstack-protector-strong -Wformat -Werror=format-security -g -Wall -I libjte -pthread -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -Wdate-time -D_FORTIFY_SOURCE=2 -c -o jigdump.o jigdump.c i686-linux-gnu-gcc -g -O2 -ffile-prefix-map=/build/reproducible-path/jigit-1.22=. -fstack-protector-strong -Wformat -Werror=format-security -g -Wall -I libjte -pthread -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -Wdate-time -D_FORTIFY_SOURCE=2 -c -o md5.o md5.c i686-linux-gnu-gcc -g -O2 -ffile-prefix-map=/build/reproducible-path/jigit-1.22=. -fstack-protector-strong -Wformat -Werror=format-security -g -Wall -I libjte -pthread -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -Wdate-time -D_FORTIFY_SOURCE=2 -c -o jig-base64.o jig-base64.c i686-linux-gnu-gcc -Wl,-z,relro -o jigdump jigdump.o md5.o jig-base64.o i686-linux-gnu-gcc -g -O2 -ffile-prefix-map=/build/reproducible-path/jigit-1.22=. -fstack-protector-strong -Wformat -Werror=format-security -g -Wall -I libjte -pthread -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -Wdate-time -D_FORTIFY_SOURCE=2 -c -o mkimage.o mkimage.c mkimage.c: In function 'parse_template_file': mkimage.c:1080:67: warning: format '%ld' expects argument of type 'long int', but argument 4 has type 'int' [-Wformat=] 1080 | fprintf(logfile, "Unknown block type %d, offset %ld\n", bufptr[0], bufptr - buf); | ~~^ ~~~~~~~~~~~~ | | | | long int int | %d mkimage.c:1226:67: warning: format '%ld' expects argument of type 'long int', but argument 4 has type 'int' [-Wformat=] 1226 | fprintf(logfile, "Unknown block type %d, offset %ld\n", bufptr[0], bufptr - buf); | ~~^ ~~~~~~~~~~~~ | | | | long int int | %d mkimage.c:1004:5: warning: ignoring return value of 'fread' declared with attribute 'warn_unused_result' [-Wunused-result] 1004 | fread(buf, 6, 1, file); | ^~~~~~~~~~~~~~~~~~~~~~ mkimage.c:1277:21: warning: pointer 'file' may be used after 'fclose' [-Wuse-after-free] 1277 | fclose(file); | ^~~~~~~~~~~~ mkimage.c:1236:5: note: call to 'fclose' here 1236 | fclose(file); | ^~~~~~~~~~~~ mkimage.c:1258:21: warning: pointer 'file' may be used after 'fclose' [-Wuse-after-free] 1258 | fclose(file); | ^~~~~~~~~~~~ mkimage.c:1236:5: note: call to 'fclose' here 1236 | fclose(file); | ^~~~~~~~~~~~ i686-linux-gnu-gcc -g -O2 -ffile-prefix-map=/build/reproducible-path/jigit-1.22=. -fstack-protector-strong -Wformat -Werror=format-security -g -Wall -I libjte -pthread -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -Wdate-time -D_FORTIFY_SOURCE=2 -c -o endian.o endian.c make -C libjte make[2]: Entering directory '/build/reproducible-path/jigit-1.22/libjte' i686-linux-gnu-gcc -DPACKAGE_NAME=\"libjte\" -DPACKAGE_TARNAME=\"libjte\" -DPACKAGE_VERSION=\"2.0.0\" -DPACKAGE_STRING=\"libjte\ 2.0.0\" -DPACKAGE_BUGREPORT=\"https://www.einval.com/\~steve/software/JTE/\" -DPACKAGE_URL=\"\" -DPACKAGE=\"libjte\" -DVERSION=\"2.0.0\" -DHAVE_STDIO_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_STRINGS_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_UNISTD_H=1 -DSTDC_HEADERS=1 -D_FILE_OFFSET_BITS=64 -DHAVE_FSEEKO=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_FCNTL_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_LIMITS_H=1 -DHAVE_STDDEF_H=1 -DHAVE_STDINT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_UNISTD_H=1 -DHAVE_MALLOC=1 -DHAVE_MEMSET=1 -DHAVE_REGCOMP=1 -DHAVE_STRCASECMP=1 -DHAVE_STRDUP=1 -DHAVE_STRERROR=1 -DHAVE_STRNCASECMP=1 -DHAVE_STRNDUP=1 -DHAVE_STRSTR=1 -D_GNU_SOURCE=1 -DHAVE_LIBBZ2=1 -DHAVE_LIBPTHREAD=1 -I. -Ilibjte -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/reproducible-path/jigit-1.22=. -fstack-protector-strong -Wformat -Werror=format-security -std=c99 -g -pedantic -Wall -DDEBUG -c -o test/demo-demo.o `test -f 'test/demo.c' || echo './'`test/demo.c /bin/bash ./libtool --silent --tag=CC --mode=compile i686-linux-gnu-gcc -DPACKAGE_NAME=\"libjte\" -DPACKAGE_TARNAME=\"libjte\" -DPACKAGE_VERSION=\"2.0.0\" -DPACKAGE_STRING=\"libjte\ 2.0.0\" -DPACKAGE_BUGREPORT=\"https://www.einval.com/\~steve/software/JTE/\" -DPACKAGE_URL=\"\" -DPACKAGE=\"libjte\" -DVERSION=\"2.0.0\" -DHAVE_STDIO_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_STRINGS_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_UNISTD_H=1 -DSTDC_HEADERS=1 -D_FILE_OFFSET_BITS=64 -DHAVE_FSEEKO=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_FCNTL_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_LIMITS_H=1 -DHAVE_STDDEF_H=1 -DHAVE_STDINT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_UNISTD_H=1 -DHAVE_MALLOC=1 -DHAVE_MEMSET=1 -DHAVE_REGCOMP=1 -DHAVE_STRCASECMP=1 -DHAVE_STRDUP=1 -DHAVE_STRERROR=1 -DHAVE_STRNCASECMP=1 -DHAVE_STRNDUP=1 -DHAVE_STRSTR=1 -D_GNU_SOURCE=1 -DHAVE_LIBBZ2=1 -DHAVE_LIBPTHREAD=1 -I. -Wdate-time -D_FORTIFY_SOURCE=2 -DLIBJTE_WITH_ZLIB -DLIBJTE_WITH_LIBBZ2 -DTHREADED_CHECKSUMS -g -O2 -ffile-prefix-map=/build/reproducible-path/jigit-1.22=. -fstack-protector-strong -Wformat -Werror=format-security -std=c99 -g -pedantic -Wall -DDEBUG -c -o libjte_libjte_la-checksum.lo `test -f 'checksum.c' || echo './'`checksum.c /bin/bash ./libtool --silent --tag=CC --mode=compile i686-linux-gnu-gcc -DPACKAGE_NAME=\"libjte\" -DPACKAGE_TARNAME=\"libjte\" -DPACKAGE_VERSION=\"2.0.0\" -DPACKAGE_STRING=\"libjte\ 2.0.0\" -DPACKAGE_BUGREPORT=\"https://www.einval.com/\~steve/software/JTE/\" -DPACKAGE_URL=\"\" -DPACKAGE=\"libjte\" -DVERSION=\"2.0.0\" -DHAVE_STDIO_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_STRINGS_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_UNISTD_H=1 -DSTDC_HEADERS=1 -D_FILE_OFFSET_BITS=64 -DHAVE_FSEEKO=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_FCNTL_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_LIMITS_H=1 -DHAVE_STDDEF_H=1 -DHAVE_STDINT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_UNISTD_H=1 -DHAVE_MALLOC=1 -DHAVE_MEMSET=1 -DHAVE_REGCOMP=1 -DHAVE_STRCASECMP=1 -DHAVE_STRDUP=1 -DHAVE_STRERROR=1 -DHAVE_STRNCASECMP=1 -DHAVE_STRNDUP=1 -DHAVE_STRSTR=1 -D_GNU_SOURCE=1 -DHAVE_LIBBZ2=1 -DHAVE_LIBPTHREAD=1 -I. -Wdate-time -D_FORTIFY_SOURCE=2 -DLIBJTE_WITH_ZLIB -DLIBJTE_WITH_LIBBZ2 -DTHREADED_CHECKSUMS -g -O2 -ffile-prefix-map=/build/reproducible-path/jigit-1.22=. -fstack-protector-strong -Wformat -Werror=format-security -std=c99 -g -pedantic -Wall -DDEBUG -c -o libjte_libjte_la-endian.lo `test -f 'endian.c' || echo './'`endian.c /bin/bash ./libtool --silent --tag=CC --mode=compile i686-linux-gnu-gcc -DPACKAGE_NAME=\"libjte\" -DPACKAGE_TARNAME=\"libjte\" -DPACKAGE_VERSION=\"2.0.0\" -DPACKAGE_STRING=\"libjte\ 2.0.0\" -DPACKAGE_BUGREPORT=\"https://www.einval.com/\~steve/software/JTE/\" -DPACKAGE_URL=\"\" -DPACKAGE=\"libjte\" -DVERSION=\"2.0.0\" -DHAVE_STDIO_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_STRINGS_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_UNISTD_H=1 -DSTDC_HEADERS=1 -D_FILE_OFFSET_BITS=64 -DHAVE_FSEEKO=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_FCNTL_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_LIMITS_H=1 -DHAVE_STDDEF_H=1 -DHAVE_STDINT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_UNISTD_H=1 -DHAVE_MALLOC=1 -DHAVE_MEMSET=1 -DHAVE_REGCOMP=1 -DHAVE_STRCASECMP=1 -DHAVE_STRDUP=1 -DHAVE_STRERROR=1 -DHAVE_STRNCASECMP=1 -DHAVE_STRNDUP=1 -DHAVE_STRSTR=1 -D_GNU_SOURCE=1 -DHAVE_LIBBZ2=1 -DHAVE_LIBPTHREAD=1 -I. -Wdate-time -D_FORTIFY_SOURCE=2 -DLIBJTE_WITH_ZLIB -DLIBJTE_WITH_LIBBZ2 -DTHREADED_CHECKSUMS -g -O2 -ffile-prefix-map=/build/reproducible-path/jigit-1.22=. -fstack-protector-strong -Wformat -Werror=format-security -std=c99 -g -pedantic -Wall -DDEBUG -c -o libjte_libjte_la-jte.lo `test -f 'jte.c' || echo './'`jte.c /bin/bash ./libtool --silent --tag=CC --mode=compile i686-linux-gnu-gcc -DPACKAGE_NAME=\"libjte\" -DPACKAGE_TARNAME=\"libjte\" -DPACKAGE_VERSION=\"2.0.0\" -DPACKAGE_STRING=\"libjte\ 2.0.0\" -DPACKAGE_BUGREPORT=\"https://www.einval.com/\~steve/software/JTE/\" -DPACKAGE_URL=\"\" -DPACKAGE=\"libjte\" -DVERSION=\"2.0.0\" -DHAVE_STDIO_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_STRINGS_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_UNISTD_H=1 -DSTDC_HEADERS=1 -D_FILE_OFFSET_BITS=64 -DHAVE_FSEEKO=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_FCNTL_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_LIMITS_H=1 -DHAVE_STDDEF_H=1 -DHAVE_STDINT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_UNISTD_H=1 -DHAVE_MALLOC=1 -DHAVE_MEMSET=1 -DHAVE_REGCOMP=1 -DHAVE_STRCASECMP=1 -DHAVE_STRDUP=1 -DHAVE_STRERROR=1 -DHAVE_STRNCASECMP=1 -DHAVE_STRNDUP=1 -DHAVE_STRSTR=1 -D_GNU_SOURCE=1 -DHAVE_LIBBZ2=1 -DHAVE_LIBPTHREAD=1 -I. -Wdate-time -D_FORTIFY_SOURCE=2 -DLIBJTE_WITH_ZLIB -DLIBJTE_WITH_LIBBZ2 -DTHREADED_CHECKSUMS -g -O2 -ffile-prefix-map=/build/reproducible-path/jigit-1.22=. -fstack-protector-strong -Wformat -Werror=format-security -std=c99 -g -pedantic -Wall -DDEBUG -c -o libjte_libjte_la-libjte.lo `test -f 'libjte.c' || echo './'`libjte.c /bin/bash ./libtool --silent --tag=CC --mode=compile i686-linux-gnu-gcc -DPACKAGE_NAME=\"libjte\" -DPACKAGE_TARNAME=\"libjte\" -DPACKAGE_VERSION=\"2.0.0\" -DPACKAGE_STRING=\"libjte\ 2.0.0\" -DPACKAGE_BUGREPORT=\"https://www.einval.com/\~steve/software/JTE/\" -DPACKAGE_URL=\"\" -DPACKAGE=\"libjte\" -DVERSION=\"2.0.0\" -DHAVE_STDIO_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_STRINGS_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_UNISTD_H=1 -DSTDC_HEADERS=1 -D_FILE_OFFSET_BITS=64 -DHAVE_FSEEKO=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_FCNTL_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_LIMITS_H=1 -DHAVE_STDDEF_H=1 -DHAVE_STDINT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_UNISTD_H=1 -DHAVE_MALLOC=1 -DHAVE_MEMSET=1 -DHAVE_REGCOMP=1 -DHAVE_STRCASECMP=1 -DHAVE_STRDUP=1 -DHAVE_STRERROR=1 -DHAVE_STRNCASECMP=1 -DHAVE_STRNDUP=1 -DHAVE_STRSTR=1 -D_GNU_SOURCE=1 -DHAVE_LIBBZ2=1 -DHAVE_LIBPTHREAD=1 -I. -Wdate-time -D_FORTIFY_SOURCE=2 -DLIBJTE_WITH_ZLIB -DLIBJTE_WITH_LIBBZ2 -DTHREADED_CHECKSUMS -g -O2 -ffile-prefix-map=/build/reproducible-path/jigit-1.22=. -fstack-protector-strong -Wformat -Werror=format-security -std=c99 -g -pedantic -Wall -DDEBUG -c -o libjte_libjte_la-md5.lo `test -f 'md5.c' || echo './'`md5.c /bin/bash ./libtool --silent --tag=CC --mode=compile i686-linux-gnu-gcc -DPACKAGE_NAME=\"libjte\" -DPACKAGE_TARNAME=\"libjte\" -DPACKAGE_VERSION=\"2.0.0\" -DPACKAGE_STRING=\"libjte\ 2.0.0\" -DPACKAGE_BUGREPORT=\"https://www.einval.com/\~steve/software/JTE/\" -DPACKAGE_URL=\"\" -DPACKAGE=\"libjte\" -DVERSION=\"2.0.0\" -DHAVE_STDIO_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_STRINGS_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_UNISTD_H=1 -DSTDC_HEADERS=1 -D_FILE_OFFSET_BITS=64 -DHAVE_FSEEKO=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_FCNTL_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_LIMITS_H=1 -DHAVE_STDDEF_H=1 -DHAVE_STDINT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_UNISTD_H=1 -DHAVE_MALLOC=1 -DHAVE_MEMSET=1 -DHAVE_REGCOMP=1 -DHAVE_STRCASECMP=1 -DHAVE_STRDUP=1 -DHAVE_STRERROR=1 -DHAVE_STRNCASECMP=1 -DHAVE_STRNDUP=1 -DHAVE_STRSTR=1 -D_GNU_SOURCE=1 -DHAVE_LIBBZ2=1 -DHAVE_LIBPTHREAD=1 -I. -Wdate-time -D_FORTIFY_SOURCE=2 -DLIBJTE_WITH_ZLIB -DLIBJTE_WITH_LIBBZ2 -DTHREADED_CHECKSUMS -g -O2 -ffile-prefix-map=/build/reproducible-path/jigit-1.22=. -fstack-protector-strong -Wformat -Werror=format-security -std=c99 -g -pedantic -Wall -DDEBUG -c -o libjte_libjte_la-rsync.lo `test -f 'rsync.c' || echo './'`rsync.c /bin/bash ./libtool --silent --tag=CC --mode=compile i686-linux-gnu-gcc -DPACKAGE_NAME=\"libjte\" -DPACKAGE_TARNAME=\"libjte\" -DPACKAGE_VERSION=\"2.0.0\" -DPACKAGE_STRING=\"libjte\ 2.0.0\" -DPACKAGE_BUGREPORT=\"https://www.einval.com/\~steve/software/JTE/\" -DPACKAGE_URL=\"\" -DPACKAGE=\"libjte\" -DVERSION=\"2.0.0\" -DHAVE_STDIO_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_STRINGS_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_UNISTD_H=1 -DSTDC_HEADERS=1 -D_FILE_OFFSET_BITS=64 -DHAVE_FSEEKO=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_FCNTL_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_LIMITS_H=1 -DHAVE_STDDEF_H=1 -DHAVE_STDINT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_UNISTD_H=1 -DHAVE_MALLOC=1 -DHAVE_MEMSET=1 -DHAVE_REGCOMP=1 -DHAVE_STRCASECMP=1 -DHAVE_STRDUP=1 -DHAVE_STRERROR=1 -DHAVE_STRNCASECMP=1 -DHAVE_STRNDUP=1 -DHAVE_STRSTR=1 -D_GNU_SOURCE=1 -DHAVE_LIBBZ2=1 -DHAVE_LIBPTHREAD=1 -I. -Wdate-time -D_FORTIFY_SOURCE=2 -DLIBJTE_WITH_ZLIB -DLIBJTE_WITH_LIBBZ2 -DTHREADED_CHECKSUMS -g -O2 -ffile-prefix-map=/build/reproducible-path/jigit-1.22=. -fstack-protector-strong -Wformat -Werror=format-security -std=c99 -g -pedantic -Wall -DDEBUG -c -o libjte_libjte_la-sha1.lo `test -f 'sha1.c' || echo './'`sha1.c /bin/bash ./libtool --silent --tag=CC --mode=compile i686-linux-gnu-gcc -DPACKAGE_NAME=\"libjte\" -DPACKAGE_TARNAME=\"libjte\" -DPACKAGE_VERSION=\"2.0.0\" -DPACKAGE_STRING=\"libjte\ 2.0.0\" -DPACKAGE_BUGREPORT=\"https://www.einval.com/\~steve/software/JTE/\" -DPACKAGE_URL=\"\" -DPACKAGE=\"libjte\" -DVERSION=\"2.0.0\" -DHAVE_STDIO_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_STRINGS_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_UNISTD_H=1 -DSTDC_HEADERS=1 -D_FILE_OFFSET_BITS=64 -DHAVE_FSEEKO=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_FCNTL_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_LIMITS_H=1 -DHAVE_STDDEF_H=1 -DHAVE_STDINT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_UNISTD_H=1 -DHAVE_MALLOC=1 -DHAVE_MEMSET=1 -DHAVE_REGCOMP=1 -DHAVE_STRCASECMP=1 -DHAVE_STRDUP=1 -DHAVE_STRERROR=1 -DHAVE_STRNCASECMP=1 -DHAVE_STRNDUP=1 -DHAVE_STRSTR=1 -D_GNU_SOURCE=1 -DHAVE_LIBBZ2=1 -DHAVE_LIBPTHREAD=1 -I. -Wdate-time -D_FORTIFY_SOURCE=2 -DLIBJTE_WITH_ZLIB -DLIBJTE_WITH_LIBBZ2 -DTHREADED_CHECKSUMS -g -O2 -ffile-prefix-map=/build/reproducible-path/jigit-1.22=. -fstack-protector-strong -Wformat -Werror=format-security -std=c99 -g -pedantic -Wall -DDEBUG -c -o libjte_libjte_la-sha256.lo `test -f 'sha256.c' || echo './'`sha256.c /bin/bash ./libtool --silent --tag=CC --mode=compile i686-linux-gnu-gcc -DPACKAGE_NAME=\"libjte\" -DPACKAGE_TARNAME=\"libjte\" -DPACKAGE_VERSION=\"2.0.0\" -DPACKAGE_STRING=\"libjte\ 2.0.0\" -DPACKAGE_BUGREPORT=\"https://www.einval.com/\~steve/software/JTE/\" -DPACKAGE_URL=\"\" -DPACKAGE=\"libjte\" -DVERSION=\"2.0.0\" -DHAVE_STDIO_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_STRINGS_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_UNISTD_H=1 -DSTDC_HEADERS=1 -D_FILE_OFFSET_BITS=64 -DHAVE_FSEEKO=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_FCNTL_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_LIMITS_H=1 -DHAVE_STDDEF_H=1 -DHAVE_STDINT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_UNISTD_H=1 -DHAVE_MALLOC=1 -DHAVE_MEMSET=1 -DHAVE_REGCOMP=1 -DHAVE_STRCASECMP=1 -DHAVE_STRDUP=1 -DHAVE_STRERROR=1 -DHAVE_STRNCASECMP=1 -DHAVE_STRNDUP=1 -DHAVE_STRSTR=1 -D_GNU_SOURCE=1 -DHAVE_LIBBZ2=1 -DHAVE_LIBPTHREAD=1 -I. -Wdate-time -D_FORTIFY_SOURCE=2 -DLIBJTE_WITH_ZLIB -DLIBJTE_WITH_LIBBZ2 -DTHREADED_CHECKSUMS -g -O2 -ffile-prefix-map=/build/reproducible-path/jigit-1.22=. -fstack-protector-strong -Wformat -Werror=format-security -std=c99 -g -pedantic -Wall -DDEBUG -c -o libjte_libjte_la-sha512.lo `test -f 'sha512.c' || echo './'`sha512.c /bin/bash ./libtool --silent --tag=CC --mode=link i686-linux-gnu-gcc -g -O2 -ffile-prefix-map=/build/reproducible-path/jigit-1.22=. -fstack-protector-strong -Wformat -Werror=format-security -std=c99 -g -pedantic -Wall -DDEBUG -Wl,-z,relro -Wl,--version-script=libjte.ver -o test/demo test/demo-demo.o libjte_libjte_la-checksum.lo libjte_libjte_la-endian.lo libjte_libjte_la-jte.lo libjte_libjte_la-libjte.lo libjte_libjte_la-md5.lo libjte_libjte_la-rsync.lo libjte_libjte_la-sha1.lo libjte_libjte_la-sha256.lo libjte_libjte_la-sha512.lo -lz -lpthread -lbz2 /bin/bash ./libtool --silent --tag=CC --mode=link i686-linux-gnu-gcc -DLIBJTE_WITH_ZLIB -DLIBJTE_WITH_LIBBZ2 -DTHREADED_CHECKSUMS -g -O2 -ffile-prefix-map=/build/reproducible-path/jigit-1.22=. -fstack-protector-strong -Wformat -Werror=format-security -std=c99 -g -pedantic -Wall -DDEBUG -version-info 2:0:0 -Wl,-z,relro -Wl,--version-script=libjte.ver -o libjte/libjte.la -rpath /usr/lib/i386-linux-gnu libjte_libjte_la-checksum.lo libjte_libjte_la-endian.lo libjte_libjte_la-jte.lo libjte_libjte_la-libjte.lo libjte_libjte_la-md5.lo libjte_libjte_la-rsync.lo libjte_libjte_la-sha1.lo libjte_libjte_la-sha256.lo libjte_libjte_la-sha512.lo -lz -lpthread -lbz2 make[2]: Leaving directory '/build/reproducible-path/jigit-1.22/libjte' i686-linux-gnu-gcc -g -O2 -ffile-prefix-map=/build/reproducible-path/jigit-1.22=. -fstack-protector-strong -Wformat -Werror=format-security -g -Wall -I libjte -pthread -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -Wdate-time -D_FORTIFY_SOURCE=2 -c -o uncompress.o uncompress.c uncompress.c: In function 'read_data_block': uncompress.c:109:9: warning: ignoring return value of 'fread' declared with attribute 'warn_unused_result' [-Wunused-result] 109 | fread(inbuf, sizeof(inbuf), 1, template_file); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ uncompress.c:130:5: warning: ignoring return value of 'fread' declared with attribute 'warn_unused_result' [-Wunused-result] 130 | fread(inbuf, 16, 1, template_file); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ i686-linux-gnu-gcc -Wl,-z,relro -o jigit-mkimage mkimage.o endian.o md5.o libjte/libjte_libjte_la-sha256.o uncompress.o jig-base64.o -lz -lbz2 i686-linux-gnu-gcc -g -O2 -ffile-prefix-map=/build/reproducible-path/jigit-1.22=. -fstack-protector-strong -Wformat -Werror=format-security -g -Wall -I libjte -pthread -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -Wdate-time -D_FORTIFY_SOURCE=2 -c -o jigsum.o jigsum.c i686-linux-gnu-gcc -Wl,-z,relro -o jigsum jigsum.o md5.o jig-base64.o i686-linux-gnu-gcc -g -O2 -ffile-prefix-map=/build/reproducible-path/jigit-1.22=. -fstack-protector-strong -Wformat -Werror=format-security -g -Wall -I libjte -pthread -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -Wdate-time -D_FORTIFY_SOURCE=2 -c -o jigsum-sha256.o jigsum-sha256.c i686-linux-gnu-gcc -Wl,-z,relro -o jigsum-sha256 jigsum-sha256.o libjte/libjte_libjte_la-sha256.o jig-base64.o i686-linux-gnu-gcc -g -O2 -ffile-prefix-map=/build/reproducible-path/jigit-1.22=. -fstack-protector-strong -Wformat -Werror=format-security -g -Wall -I libjte -pthread -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -Wdate-time -D_FORTIFY_SOURCE=2 -c -o rsync.o rsync.c i686-linux-gnu-gcc -Wl,-z,relro -o rsyncsum rsync.o md5.o jig-base64.o i686-linux-gnu-gcc -g -O2 -ffile-prefix-map=/build/reproducible-path/jigit-1.22=. -fstack-protector-strong -Wformat -Werror=format-security -g -Wall -I libjte -pthread -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -Wdate-time -D_FORTIFY_SOURCE=2 -c -o extract-data.o extract-data.c i686-linux-gnu-gcc -Wl,-z,relro -o extract-data extract-data.o endian.o uncompress.o -lz -lbz2 i686-linux-gnu-gcc -g -O2 -ffile-prefix-map=/build/reproducible-path/jigit-1.22=. -fstack-protector-strong -Wformat -Werror=format-security -g -Wall -I libjte -pthread -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -Wdate-time -D_FORTIFY_SOURCE=2 -c -o parallel-sums.o parallel-sums.c i686-linux-gnu-gcc -pthread -Wl,-z,relro -o parallel-sums parallel-sums.o libjte/libjte_libjte_la-checksum.o libjte/libjte_libjte_la-md5.o libjte/libjte_libjte_la-sha1.o libjte/libjte_libjte_la-sha256.o libjte/libjte_libjte_la-sha512.o -lpthread make[1]: Leaving directory '/build/reproducible-path/jigit-1.22' touch build-stamp fakeroot debian/rules binary dh_testdir dh_testroot dh_prep dh_installdirs dh_installdirs -plibjte-dev /usr/lib/i386-linux-gnu/pkgconfig # Add here commands to install the package into debian/ #/usr/bin/make prefix=`pwd`/debian/`dh_listpackages`/usr install dh_install -pjigit jigit-mkimage jigdump usr/bin dh_install -pjigit jigsum jigsum-sha256 parallel-sums usr/bin dh_install -pjigit libjte/bin/jigdo-gen-checksum-list usr/bin dh_install -pjigit mkjigsnap usr/sbin dh_install -pjigit *.1 usr/share/man/man1 dh_install -pjigit mkjigsnap.8 usr/share/man/man8 dh_install -plibjte2 libjte/libjte/.libs/libjte.so.2.0.0 usr/lib/i386-linux-gnu dh_install -plibjte2 libjte/libjte/.libs/libjte.so.2 usr/lib/i386-linux-gnu dh_install -plibjte-dev libjte/libjte/.libs/libjte.a usr/lib/i386-linux-gnu dh_install -plibjte-dev libjte/libjte/.libs/libjte.so usr/lib/i386-linux-gnu dh_install -plibjte-dev libjte/libjte.h usr/include/libjte dh_install -plibjte-dev libjte/libjte-2.pc usr/lib/i386-linux-gnu/pkgconfig dh_testdir dh_testroot dh_installchangelogs dh_installdocs dh_installexamples dh_installman dh_makeshlibs dh_link dh_strip dh_compress dh_fixperms dh_installdeb dh_shlibdeps dh_gencontrol dpkg-gencontrol: warning: Depends field of package libjte-dev: substitution variable ${shlibs:Depends} used, but is not defined dh_md5sums dh_builddeb dpkg-deb: building package 'jigit' in '../jigit_1.22-4_i386.deb'. dpkg-deb: building package 'libjte2' in '../libjte2_1.22-4_i386.deb'. dpkg-deb: building package 'jigit-dbgsym' in '../jigit-dbgsym_1.22-4_i386.deb'. dpkg-deb: building package 'libjte2-dbgsym' in '../libjte2-dbgsym_1.22-4_i386.deb'. dpkg-deb: building package 'libjte-dev' in '../libjte-dev_1.22-4_i386.deb'. dpkg-genbuildinfo --build=binary -O../jigit_1.22-4_i386.buildinfo dpkg-genchanges --build=binary -O../jigit_1.22-4_i386.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/59427 and its subdirectories I: Current time: Thu Apr 18 02:02:09 -12 2024 I: pbuilder-time-stamp: 1713448929 Thu Apr 18 14:02:10 UTC 2024 I: 1st build successful. Starting 2nd build on remote node ionos16-i386.debian.net. Thu Apr 18 14:02:10 UTC 2024 I: Preparing to do remote build '2' on ionos16-i386.debian.net. Thu Apr 18 14:02:54 UTC 2024 I: Deleting $TMPDIR on ionos16-i386.debian.net. Thu Apr 18 14:02:54 UTC 2024 I: jigit_1.22-4_i386.changes: Format: 1.8 Date: Thu, 03 Aug 2023 22:10:39 +0100 Source: jigit Binary: jigit jigit-dbgsym libjte-dev libjte2 libjte2-dbgsym Architecture: i386 Version: 1.22-4 Distribution: unstable Urgency: medium Maintainer: Steve McIntyre <93sam@debian.org> Changed-By: Steve McIntyre <93sam@debian.org> Description: jigit - tools for working with jigdo files libjte-dev - Jigdo Template Export - development libjte2 - Jigdo Template Export - runtime library Closes: 836791 1041753 Changes: jigit (1.22-4) unstable; urgency=medium . * Don't ship empty directory /usr/lib/pkgconfig. Closes: #1041753 * Fix cross-building. Closes: #836791. Thanks to Helmut Grohne for the patch. + Let dh_auto_configure pass relevant cross flags + Pass triplet-prefixed CC to make Checksums-Sha1: 8abb2fd94b28f84939d5fc42db063afcbf8e72db 107720 jigit-dbgsym_1.22-4_i386.deb ab16731c7a9a4de970e33709397ade41be15d04d 6163 jigit_1.22-4_i386.buildinfo 5fb186303cc26b55f01ca85ecc7e714f08a2a568 52888 jigit_1.22-4_i386.deb 081dbc9ef916257c5b14e300cca9fda7e464b5ea 37552 libjte-dev_1.22-4_i386.deb 4d92a71f70da3640efdfa198cec0d36cb4bc82ed 59124 libjte2-dbgsym_1.22-4_i386.deb e3b48ee200cb1a7c1e4515d5c4bca791fe9db2e7 31296 libjte2_1.22-4_i386.deb Checksums-Sha256: 80a75b92e5e6d5ab61de4793ca1a511c6fe6c27d05c695a60b3b49437abb885a 107720 jigit-dbgsym_1.22-4_i386.deb f9ddd8ad2f14985a666efd420d4c92676692df10e52626cae84e75194088aeed 6163 jigit_1.22-4_i386.buildinfo 12bdd589709b80f838b4e316a9d5deb77840fb3e884c9483bfa4da2dce794082 52888 jigit_1.22-4_i386.deb 504a8651eaaae7edae382bfa9b59534c040804cf0083c2acd683f028e483faf0 37552 libjte-dev_1.22-4_i386.deb 462d0c463cb3d08e1744a0ee652f24cdde69fe086a3bb84cf207d20b8c379674 59124 libjte2-dbgsym_1.22-4_i386.deb 602fa548ac8548c25715d409c24fc026a86f556123e707f63e74a3b436841c69 31296 libjte2_1.22-4_i386.deb Files: 69f5a5bcc495cec98ce170d8d8810390 107720 debug optional jigit-dbgsym_1.22-4_i386.deb f26faf1bae4d78c17f0adb7b97285dc3 6163 utils optional jigit_1.22-4_i386.buildinfo 3fa868e80e73d91a0250750cc9cda81e 52888 utils optional jigit_1.22-4_i386.deb 4c301e3b4858a76a3828e87e5411fd68 37552 libdevel optional libjte-dev_1.22-4_i386.deb b940fa5f6edd8c54aaa7ed21ab45b471 59124 debug optional libjte2-dbgsym_1.22-4_i386.deb cd06be5d15848c3bb028a28898f30d8a 31296 libs optional libjte2_1.22-4_i386.deb Thu Apr 18 14:02:56 UTC 2024 I: diffoscope 264 will be used to compare the two builds: Running as unit: rb-diffoscope-i386_12-7986.service # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.x1dEW9vj/jigit_1.22-4.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.x1dEW9vj/jigit_1.22-4.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.x1dEW9vj/jigit_1.22-4.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.x1dEW9vj/b1/jigit_1.22-4_i386.changes /srv/reproducible-results/rbuild-debian/r-b-build.x1dEW9vj/b2/jigit_1.22-4_i386.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.367s) 0.367s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.021s) 0.021s 12 calls diffoscope.comparators.binary.FilesystemFile ## specialize (total time: 0.000s) 0.000s 1 call specialize Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 699ms CPU time consumed: 699ms Thu Apr 18 14:02:57 UTC 2024 I: diffoscope 264 found no differences in the changes files, and a .buildinfo file also exists. Thu Apr 18 14:02:57 UTC 2024 I: jigit from trixie built successfully and reproducibly on i386. Thu Apr 18 14:02:58 UTC 2024 I: Submitting .buildinfo files to external archives: Thu Apr 18 14:02:58 UTC 2024 I: Submitting 8.0K b1/jigit_1.22-4_i386.buildinfo.asc Thu Apr 18 14:02:59 UTC 2024 I: Submitting 8.0K b2/jigit_1.22-4_i386.buildinfo.asc Thu Apr 18 14:03:00 UTC 2024 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Thu Apr 18 14:03:00 UTC 2024 I: Done submitting .buildinfo files. Thu Apr 18 14:03:00 UTC 2024 I: Removing signed jigit_1.22-4_i386.buildinfo.asc files: removed './b1/jigit_1.22-4_i386.buildinfo.asc' removed './b2/jigit_1.22-4_i386.buildinfo.asc'