Thu May 2 02:44:46 UTC 2024 I: starting to build baycomepp/trixie/i386 on jenkins on '2024-05-02 02:44' Thu May 2 02:44:46 UTC 2024 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/i386_6/23185/console.log Thu May 2 02:44:46 UTC 2024 I: Downloading source for trixie/baycomepp=0.10-18 --2024-05-02 02:44:46-- http://deb.debian.org/debian/pool/main/b/baycomepp/baycomepp_0.10-18.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2029 (2.0K) [text/prs.lines.tag] Saving to: ‘baycomepp_0.10-18.dsc’ 0K . 100% 272M=0s 2024-05-02 02:44:46 (272 MB/s) - ‘baycomepp_0.10-18.dsc’ saved [2029/2029] Thu May 2 02:44:47 UTC 2024 I: baycomepp_0.10-18.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: baycomepp Binary: baycomepp Architecture: i386 alpha amd64 Version: 0.10-18 Maintainer: Debian Hamradio Maintainers Uploaders: Jaime Robles , Patrick Ouellette , tony mancill Standards-Version: 4.7.0 Vcs-Browser: https://salsa.debian.org/debian-hamradio-team/baycomepp Vcs-Git: https://salsa.debian.org/debian-hamradio-team/baycomepp.git Build-Depends: debhelper-compat (= 13), zlib1g-dev Package-List: baycomepp deb hamradio optional arch=i386,alpha,amd64 Checksums-Sha1: cc47f4f14f9edc2e233c9fd1d6020b840ee7d544 474619 baycomepp_0.10.orig.tar.gz 47914c6583800a16ff458b084eb78283b04713c0 130892 baycomepp_0.10-18.debian.tar.xz Checksums-Sha256: 8d6518070a295f191799f69a337fd68f0b65fc7cf32a1650a998e06854a65fbb 474619 baycomepp_0.10.orig.tar.gz 3590213dfc6b0d9ecf2a88ea9735bf22ea70ab09ab411df2c4134fbdb75ecb1a 130892 baycomepp_0.10-18.debian.tar.xz Files: e63cc880222c5439e23a4601a9f8e99c 474619 baycomepp_0.10.orig.tar.gz ed58f8b0ac60bf2c595faf2706434314 130892 baycomepp_0.10-18.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQJGBAEBCgAwFiEE8s7HdaJ514A0GZEJjUsraXJJeKIFAmYpZ3ISHHdpbm5pZUBk ZWJpYW4ub3JnAAoJEI1LK2lySXiiBtUQAJyP0Rry4hZEn2L5X1OKNkl0N7466gOD G+CqM80cEvsT9+NJM1/Hiz/2d8gvlH9iXmp1Phqk5fAvrISc20FowGCFSjGE6fIr PY5FwnQCmgywfWxQ8u5A5MWSDNE7JkTL32xmA4Fn/PssHHIu5KOeziJmQmk9ucil BBSK/38IeN3k1RbSOYUkkDfuikLKMTn6yrG8nNRKdCWz61KFP1M2KHlgeFs6PhZw uVTBoW8e+XfeXIDW1Yfy+GPy4H5Vd20xeQoMU0cYG7aKh7bbCK2CAzm/Lu9Evpfr wiWCLV6S8htgY8eq5N62mGr1MOXB8Kbcx30d4PzhAJqN2BbEYqugqcFVOQBG8rCh l6ndUIDEfkp20VM4TeAwEyOoGzG/8zSKGHfMGpT3uznGEarmf4Wdld/1hIM1Nf2A D2ZYHVsCjEoQz+lnOpOKHUO8jI3tmJthz/7vEr45K7O59PZc76MlXQqKKDnEAzKA v7PzDPGHk5RrxBlICj0Mbp5rtPcPHnYXUREdXCPrJihXr8fYtGgX4WZqwaBkOZsu pNybA7mg6Qty8bXztadROWF0R4aS26juF2YKuMFg10W38XZf/NLrIq3rIiJtFspP bhSoJEawWzBl7+Y58Atn9sWJtDW1YTTD814EQ7cg/sKweMbB3NEUQ5s95vDGVV8h XB2qQ9E4v1Tn =l7QM -----END PGP SIGNATURE----- Thu May 2 02:44:47 UTC 2024 I: Checking whether the package is not for us Thu May 2 02:44:47 UTC 2024 I: Starting 1st build on remote node ionos6-i386.debian.net. Thu May 2 02:44:47 UTC 2024 I: Preparing to do remote build '1' on ionos6-i386.debian.net. Thu May 2 02:45:22 UTC 2024 I: Deleting $TMPDIR on ionos6-i386.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Tue Jun 3 21:07:48 -12 2025 I: pbuilder-time-stamp: 1749028068 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: using eatmydata during job I: Copying source file I: copying [baycomepp_0.10-18.dsc] I: copying [./baycomepp_0.10.orig.tar.gz] I: copying [./baycomepp_0.10-18.debian.tar.xz] I: Extracting source gpgv: Signature made Wed Apr 24 20:11:30 2024 gpgv: using RSA key F2CEC775A279D780341991098D4B2B69724978A2 gpgv: issuer "winnie@debian.org" gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./baycomepp_0.10-18.dsc: no acceptable signature found dpkg-source: info: extracting baycomepp in baycomepp-0.10 dpkg-source: info: unpacking baycomepp_0.10.orig.tar.gz dpkg-source: info: unpacking baycomepp_0.10-18.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying 00-baycomepp-sources.patch dpkg-source: info: applying 01-warnings-as-errors.patch dpkg-source: info: applying 02-gcc11.patch dpkg-source: info: applying fix-implicit-declaration-ftbfs.patch I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/117628/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='i386' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=22 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='i386' IFS=' ' INVOCATION_ID='466bc357568c4ef68067039a55a4f228' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' LD_LIBRARY_PATH='/usr/lib/libeatmydata' LD_PRELOAD='libeatmydata.so' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='117628' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.TiiIFQ0T/pbuilderrc_2tcV --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.TiiIFQ0T/b1 --logfile b1/build.log baycomepp_0.10-18.dsc' SUDO_GID='112' SUDO_UID='107' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://213.165.73.152:3128' I: uname -a Linux ionos6-i386 6.1.0-20-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.85-1 (2024-04-11) x86_64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 May 26 17:47 /bin -> usr/bin I: user script /srv/workspace/pbuilder/117628/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: i386 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), zlib1g-dev dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19859 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on zlib1g-dev; however: Package zlib1g-dev is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libicu72{a} libmagic-mgc{a} libmagic1t64{a} libpipeline1{a} libsub-override-perl{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} zlib1g-dev{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 31 newly installed, 0 to remove and 0 not upgraded. Need to get 20.2 MB of archives. After unpacking 75.1 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main i386 sensible-utils all 0.0.22 [22.4 kB] Get: 2 http://deb.debian.org/debian trixie/main i386 libmagic-mgc i386 1:5.45-3 [314 kB] Get: 3 http://deb.debian.org/debian trixie/main i386 libmagic1t64 i386 1:5.45-3 [114 kB] Get: 4 http://deb.debian.org/debian trixie/main i386 file i386 1:5.45-3 [42.9 kB] Get: 5 http://deb.debian.org/debian trixie/main i386 gettext-base i386 0.21-14+b1 [162 kB] Get: 6 http://deb.debian.org/debian trixie/main i386 libuchardet0 i386 0.0.8-1+b1 [69.1 kB] Get: 7 http://deb.debian.org/debian trixie/main i386 groff-base i386 1.23.0-3+b1 [1195 kB] Get: 8 http://deb.debian.org/debian trixie/main i386 bsdextrautils i386 2.40-8 [97.2 kB] Get: 9 http://deb.debian.org/debian trixie/main i386 libpipeline1 i386 1.5.7-2 [39.7 kB] Get: 10 http://deb.debian.org/debian trixie/main i386 man-db i386 2.12.0-3 [1413 kB] Get: 11 http://deb.debian.org/debian trixie/main i386 m4 i386 1.4.19-4 [293 kB] Get: 12 http://deb.debian.org/debian trixie/main i386 autoconf all 2.71-3 [332 kB] Get: 13 http://deb.debian.org/debian trixie/main i386 autotools-dev all 20220109.1 [51.6 kB] Get: 14 http://deb.debian.org/debian trixie/main i386 automake all 1:1.16.5-1.3 [823 kB] Get: 15 http://deb.debian.org/debian trixie/main i386 autopoint all 0.21-14 [496 kB] Get: 16 http://deb.debian.org/debian trixie/main i386 libdebhelper-perl all 13.15.3 [88.0 kB] Get: 17 http://deb.debian.org/debian trixie/main i386 libtool all 2.4.7-7 [517 kB] Get: 18 http://deb.debian.org/debian trixie/main i386 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian trixie/main i386 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian trixie/main i386 libsub-override-perl all 0.10-1 [10.6 kB] Get: 21 http://deb.debian.org/debian trixie/main i386 libfile-stripnondeterminism-perl all 1.13.1-1 [19.4 kB] Get: 22 http://deb.debian.org/debian trixie/main i386 dh-strip-nondeterminism all 1.13.1-1 [8620 B] Get: 23 http://deb.debian.org/debian trixie/main i386 libelf1t64 i386 0.191-1+b1 [194 kB] Get: 24 http://deb.debian.org/debian trixie/main i386 dwz i386 0.15-1+b1 [116 kB] Get: 25 http://deb.debian.org/debian trixie/main i386 libicu72 i386 72.1-4+b1 [9549 kB] Get: 26 http://deb.debian.org/debian trixie/main i386 libxml2 i386 2.9.14+dfsg-1.3+b3 [727 kB] Get: 27 http://deb.debian.org/debian trixie/main i386 gettext i386 0.21-14+b1 [1311 kB] Get: 28 http://deb.debian.org/debian trixie/main i386 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 29 http://deb.debian.org/debian trixie/main i386 po-debconf all 1.0.21+nmu1 [248 kB] Get: 30 http://deb.debian.org/debian trixie/main i386 debhelper all 13.15.3 [901 kB] Get: 31 http://deb.debian.org/debian trixie/main i386 zlib1g-dev i386 1:1.3.dfsg-3.1 [915 kB] Fetched 20.2 MB in 0s (88.1 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19859 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.22_all.deb ... Unpacking sensible-utils (0.0.22) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3_i386.deb ... Unpacking libmagic-mgc (1:5.45-3) ... Selecting previously unselected package libmagic1t64:i386. Preparing to unpack .../02-libmagic1t64_1%3a5.45-3_i386.deb ... Unpacking libmagic1t64:i386 (1:5.45-3) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-3_i386.deb ... Unpacking file (1:5.45-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.21-14+b1_i386.deb ... Unpacking gettext-base (0.21-14+b1) ... Selecting previously unselected package libuchardet0:i386. Preparing to unpack .../05-libuchardet0_0.0.8-1+b1_i386.deb ... Unpacking libuchardet0:i386 (0.0.8-1+b1) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-3+b1_i386.deb ... Unpacking groff-base (1.23.0-3+b1) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.40-8_i386.deb ... Unpacking bsdextrautils (2.40-8) ... Selecting previously unselected package libpipeline1:i386. Preparing to unpack .../08-libpipeline1_1.5.7-2_i386.deb ... Unpacking libpipeline1:i386 (1.5.7-2) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.12.0-3_i386.deb ... Unpacking man-db (2.12.0-3) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-4_i386.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.71-3_all.deb ... Unpacking autoconf (2.71-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.21-14_all.deb ... Unpacking autopoint (0.21-14) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.15.3_all.deb ... Unpacking libdebhelper-perl (13.15.3) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.4.7-7_all.deb ... Unpacking libtool (2.4.7-7) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libsub-override-perl. Preparing to unpack .../19-libsub-override-perl_0.10-1_all.deb ... Unpacking libsub-override-perl (0.10-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../20-libfile-stripnondeterminism-perl_1.13.1-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.13.1-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../21-dh-strip-nondeterminism_1.13.1-1_all.deb ... Unpacking dh-strip-nondeterminism (1.13.1-1) ... Selecting previously unselected package libelf1t64:i386. Preparing to unpack .../22-libelf1t64_0.191-1+b1_i386.deb ... Unpacking libelf1t64:i386 (0.191-1+b1) ... Selecting previously unselected package dwz. Preparing to unpack .../23-dwz_0.15-1+b1_i386.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libicu72:i386. Preparing to unpack .../24-libicu72_72.1-4+b1_i386.deb ... Unpacking libicu72:i386 (72.1-4+b1) ... Selecting previously unselected package libxml2:i386. Preparing to unpack .../25-libxml2_2.9.14+dfsg-1.3+b3_i386.deb ... Unpacking libxml2:i386 (2.9.14+dfsg-1.3+b3) ... Selecting previously unselected package gettext. Preparing to unpack .../26-gettext_0.21-14+b1_i386.deb ... Unpacking gettext (0.21-14+b1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../27-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../28-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../29-debhelper_13.15.3_all.deb ... Unpacking debhelper (13.15.3) ... Selecting previously unselected package zlib1g-dev:i386. Preparing to unpack .../30-zlib1g-dev_1%3a1.3.dfsg-3.1_i386.deb ... Unpacking zlib1g-dev:i386 (1:1.3.dfsg-3.1) ... Setting up libpipeline1:i386 (1.5.7-2) ... Setting up libicu72:i386 (72.1-4+b1) ... Setting up bsdextrautils (2.40-8) ... Setting up libmagic-mgc (1:5.45-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.15.3) ... Setting up libmagic1t64:i386 (1:5.45-3) ... Setting up gettext-base (0.21-14+b1) ... Setting up m4 (1.4.19-4) ... Setting up file (1:5.45-3) ... Setting up libelf1t64:i386 (0.191-1+b1) ... Setting up autotools-dev (20220109.1) ... Setting up autopoint (0.21-14) ... Setting up autoconf (2.71-3) ... Setting up zlib1g-dev:i386 (1:1.3.dfsg-3.1) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.22) ... Setting up libuchardet0:i386 (0.0.8-1+b1) ... Setting up libsub-override-perl (0.10-1) ... Setting up libxml2:i386 (2.9.14+dfsg-1.3+b3) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.13.1-1) ... Setting up gettext (0.21-14+b1) ... Setting up libtool (2.4.7-7) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.13.1-1) ... Setting up groff-base (1.23.0-3+b1) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.12.0-3) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.15.3) ... Processing triggers for libc-bin (2.37-18) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/reproducible-path/baycomepp-0.10/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../baycomepp_0.10-18_source.changes dpkg-buildpackage: info: source package baycomepp dpkg-buildpackage: info: source version 0.10-18 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Patrick Winnertz dpkg-source --before-build . dpkg-buildpackage: info: host architecture i386 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config cp: warning: behavior of -n is non-portable and may change in future; use --update=none instead cp: warning: behavior of -n is non-portable and may change in future; use --update=none instead dh_autoreconf autoreconf: warning: autoconf input should be named 'configure.ac', not 'configure.in' aclocal: warning: autoconf input should be named 'configure.ac', not 'configure.in' configure.in:4: warning: The macro `AC_CANONICAL_SYSTEM' is obsolete. configure.in:4: You should run autoupdate. ./lib/autoconf/general.m4:2081: AC_CANONICAL_SYSTEM is expanded from... configure.in:4: the top level configure.in:6: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. ./lib/autoconf/general.m4:2434: AC_DIAGNOSE is expanded from... aclocal.m4:429: AM_INIT_AUTOMAKE is expanded from... configure.in:6: the top level configure.in:7: warning: 'AM_CONFIG_HEADER': this macro is obsolete. configure.in:7: You should use the 'AC_CONFIG_HEADERS' macro instead. ./lib/autoconf/general.m4:2434: AC_DIAGNOSE is expanded from... aclocal.m4:745: AM_CONFIG_HEADER is expanded from... configure.in:7: the top level configure.in:12: warning: The macro `AC_ISC_POSIX' is obsolete. configure.in:12: You should run autoupdate. ./lib/autoconf/specific.m4:550: AC_ISC_POSIX is expanded from... configure.in:12: the top level configure.in:14: warning: 'AM_PROG_CC_STDC': this macro is obsolete. configure.in:14: You should simply use the 'AC_PROG_CC' macro instead. configure.in:14: Also, your code should no longer depend upon 'am_cv_prog_cc_stdc', configure.in:14: but upon 'ac_cv_prog_cc_stdc'. ./lib/autoconf/general.m4:2434: AC_DIAGNOSE is expanded from... aclocal.m4:751: AM_PROG_CC_STDC is expanded from... configure.in:14: the top level configure.in:18: warning: The macro `AC_HEADER_STDC' is obsolete. configure.in:18: You should run autoupdate. ./lib/autoconf/headers.m4:704: AC_HEADER_STDC is expanded from... configure.in:18: the top level configure.in:26: warning: The macro `AC_CYGWIN' is obsolete. configure.in:26: You should run autoupdate. ./lib/autoconf/specific.m4:319: AC_CYGWIN is expanded from... configure.in:26: the top level configure.in:27: warning: The macro `AC_MINGW32' is obsolete. configure.in:27: You should run autoupdate. ./lib/autoconf/specific.m4:347: AC_MINGW32 is expanded from... configure.in:27: the top level configure.in:47: warning: The macro `AC_TRY_COMPILE' is obsolete. configure.in:47: You should run autoupdate. ./lib/autoconf/general.m4:2847: AC_TRY_COMPILE is expanded from... configure.in:47: the top level configure.in:63: warning: The macro `AC_TRY_COMPILE' is obsolete. configure.in:63: You should run autoupdate. ./lib/autoconf/general.m4:2847: AC_TRY_COMPILE is expanded from... configure.in:63: the top level configure.in:73: warning: The macro `AC_TRY_COMPILE' is obsolete. configure.in:73: You should run autoupdate. ./lib/autoconf/general.m4:2847: AC_TRY_COMPILE is expanded from... configure.in:73: the top level configure.in:70: warning: The macro `AC_TRY_COMPILE' is obsolete. configure.in:70: You should run autoupdate. ./lib/autoconf/general.m4:2847: AC_TRY_COMPILE is expanded from... configure.in:70: the top level configure.in:80: warning: The macro `AC_TRY_COMPILE' is obsolete. configure.in:80: You should run autoupdate. ./lib/autoconf/general.m4:2847: AC_TRY_COMPILE is expanded from... configure.in:80: the top level configure.in:87: warning: The macro `AC_TRY_COMPILE' is obsolete. configure.in:87: You should run autoupdate. ./lib/autoconf/general.m4:2847: AC_TRY_COMPILE is expanded from... configure.in:87: the top level configure.in:104: warning: The macro `AC_TRY_COMPILE' is obsolete. configure.in:104: You should run autoupdate. ./lib/autoconf/general.m4:2847: AC_TRY_COMPILE is expanded from... configure.in:104: the top level configure.in:145: warning: The macro `AC_TRY_COMPILE' is obsolete. configure.in:145: You should run autoupdate. ./lib/autoconf/general.m4:2847: AC_TRY_COMPILE is expanded from... configure.in:145: the top level configure.in:205: warning: AC_OUTPUT should be used without arguments. configure.in:205: You should run autoupdate. autoheader: warning: autoconf input should be named 'configure.ac', not 'configure.in' autoheader: warning: WARNING: Using auxiliary files such as 'acconfig.h', 'config.h.bot' autoheader: WARNING: and 'config.h.top', to define templates for 'config.h.in' autoheader: WARNING: is deprecated and discouraged. autoheader: autoheader: WARNING: Using the third argument of 'AC_DEFINE_UNQUOTED' and autoheader: WARNING: 'AC_DEFINE' allows one to define a template without autoheader: WARNING: 'acconfig.h': autoheader: autoheader: WARNING: AC_DEFINE([NEED_FUNC_MAIN], 1, autoheader: [Define if a function 'main' is needed.]) autoheader: autoheader: WARNING: More sophisticated templates can also be produced, see the autoheader: WARNING: documentation. automake: warning: autoconf input should be named 'configure.ac', not 'configure.in' configure.in:6: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. For more info, see: configure.in:6: https://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_005fINIT_005fAUTOMAKE-invocation configure.in:12: installing './compile' Makefile.am:5: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS') directx/Makefile.am:2: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS') automake: warning: autoconf input should be named 'configure.ac', not 'configure.in' eppdiag/Makefile.am:3: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS') eppfm/Makefile.am:3: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS') eppfm2/src/Makefile.am:3: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS') flexdrv/Makefile.am:3: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS') main/Makefile.am:3: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS') udriver/Makefile.am:3: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS') debian/rules override_dh_auto_configure make[1]: Entering directory '/build/reproducible-path/baycomepp-0.10' CFLAGS="-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/baycomepp-0.10=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,defs" ./configure --host=i686-linux-gnu --build=i686-linux-gnu --prefix=/usr --mandir=\${prefix}/share/man --libexecdir=\${prefix}/lib checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking target system type... i686-pc-linux-gnu checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a race-free mkdir -p... /usr/bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make sets $(MAKE)... (cached) yes checking whether make supports the include directive... yes (GNU style) checking for i686-linux-gnu-gcc... i686-linux-gnu-gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether i686-linux-gnu-gcc accepts -g... yes checking for i686-linux-gnu-gcc option to enable C11 features... none needed checking whether i686-linux-gnu-gcc understands -c and -o together... yes checking dependency style of i686-linux-gnu-gcc... gcc3 checking for library containing strerror... none required checking for i686-linux-gnu-gcc... (cached) i686-linux-gnu-gcc checking whether the compiler supports GNU C... (cached) yes checking whether i686-linux-gnu-gcc accepts -g... (cached) yes checking for i686-linux-gnu-gcc option to enable C11 features... (cached) none needed checking whether i686-linux-gnu-gcc understands -c and -o together... (cached) yes checking dependency style of i686-linux-gnu-gcc... (cached) gcc3 checking for i686-linux-gnu-gcc... (cached) i686-linux-gnu-gcc checking whether the compiler supports GNU C... (cached) yes checking whether i686-linux-gnu-gcc accepts -g... (cached) yes checking for i686-linux-gnu-gcc option to enable C11 features... (cached) none needed checking whether i686-linux-gnu-gcc understands -c and -o together... (cached) yes checking dependency style of i686-linux-gnu-gcc... (cached) gcc3 checking for an ANSI C-conforming const... yes checking for inline... inline checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for ranlib... ranlib checking for dlltool... dlltool checking for as... as checking for ar... ar checking for windres... i686-pc-cygwin-windres checking for cos in -lm... yes checking for pty.h... yes checking for getopt.h... yes checking for sys/io.h... yes checking for asm/io.h... no checking for windows.h... no checking for sched.h... yes checking for sys/perm.h... yes checking for syslog.h... yes checking for sys/socket.h... yes checking for net/if.h... yes checking for arpa/inet.h... yes checking for netinet/in.h... yes checking for linux/if.h... yes checking for linux/ax25.h... yes checking for linux/sockios.h... yes checking for linux/soundcard.h... yes checking for snprintf... yes checking for gettimeofday... yes checking for iopl... yes checking for random... yes checking for syslog... yes checking for vsyslog... yes checking for revoke... no checking for vsnprintf... yes checking for getopt_long... yes checking for openpty in -lutil... yes checking for openpty... yes checking for GetSystemTime... no checking for size_t... yes checking for bittypes... yes checking for IO functions such as inb... yes checking for M_PI... yes checking for M_LN10... yes checking for MKISS (N_AX25 line discipline)... checking how to run the C preprocessor... i686-linux-gnu-gcc -E yes checking for ifr_newname in struct ifreq... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating directx/Makefile config.status: creating main/Makefile config.status: creating udriver/Makefile config.status: creating eppdiag/Makefile config.status: creating eppfm/Makefile config.status: creating eppfm2/Makefile config.status: creating eppfm2/src/Makefile config.status: creating flexdrv/Makefile config.status: creating ntdrv/Makefile config.status: creating w9xdrv/Makefile config.status: creating config.h config.status: executing depfiles commands make[1]: Leaving directory '/build/reproducible-path/baycomepp-0.10' dh_auto_build make -j22 make[1]: Entering directory '/build/reproducible-path/baycomepp-0.10' make all-recursive make[2]: Entering directory '/build/reproducible-path/baycomepp-0.10' Making all in directx make[3]: Entering directory '/build/reproducible-path/baycomepp-0.10/directx' make all-am make[4]: Entering directory '/build/reproducible-path/baycomepp-0.10/directx' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/build/reproducible-path/baycomepp-0.10/directx' make[3]: Leaving directory '/build/reproducible-path/baycomepp-0.10/directx' Making all in main make[3]: Entering directory '/build/reproducible-path/baycomepp-0.10/main' i686-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I.. -DCONFIGDIR=\"/usr/etc\" -DLOCALSTATEDIR=\"/usr/var\" -I../directx/include -I../directx/include/directx6 -I.. -fPIC -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/baycomepp-0.10=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,defs -Wall -MT eppfpga.o -MD -MP -MF .deps/eppfpga.Tpo -c -o eppfpga.o eppfpga.c i686-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I.. -DCONFIGDIR=\"/usr/etc\" -DLOCALSTATEDIR=\"/usr/var\" -I../directx/include -I../directx/include/directx6 -I.. -fPIC -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/baycomepp-0.10=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,defs -Wall -MT fpgatests.o -MD -MP -MF .deps/fpgatests.Tpo -c -o fpgatests.o fpgatests.c i686-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I.. -DCONFIGDIR=\"/usr/etc\" -DLOCALSTATEDIR=\"/usr/var\" -I../directx/include -I../directx/include/directx6 -I.. -fPIC -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/baycomepp-0.10=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,defs -Wall -MT configfpga.o -MD -MP -MF .deps/configfpga.Tpo -c -o configfpga.o configfpga.c i686-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I.. -DCONFIGDIR=\"/usr/etc\" -DLOCALSTATEDIR=\"/usr/var\" -I../directx/include -I../directx/include/directx6 -I.. -fPIC -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/baycomepp-0.10=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,defs -Wall -MT ppdirectinit.o -MD -MP -MF .deps/ppdirectinit.Tpo -c -o ppdirectinit.o ppdirectinit.c i686-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I.. -DCONFIGDIR=\"/usr/etc\" -DLOCALSTATEDIR=\"/usr/var\" -I../directx/include -I../directx/include/directx6 -I.. -fPIC -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/baycomepp-0.10=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,defs -Wall -MT ppdirect.o -MD -MP -MF .deps/ppdirect.Tpo -c -o ppdirect.o ppdirect.c i686-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I.. -DCONFIGDIR=\"/usr/etc\" -DLOCALSTATEDIR=\"/usr/var\" -I../directx/include -I../directx/include/directx6 -I.. -fPIC -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/baycomepp-0.10=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,defs -Wall -MT snprintpkt.o -MD -MP -MF .deps/snprintpkt.Tpo -c -o snprintpkt.o snprintpkt.c rm -f libresident2.a rm -f libmisc.a ar cru libresident2.a ar cru libmisc.a ar: `u' modifier ignored since `D' is the default (see `U') ranlib libresident2.a ar: `u' modifier ignored since `D' is the default (see `U') ranlib libmisc.a ppdirectinit.c: In function 'parport_ecp': ppdirectinit.c:393:45: warning: variable 'readIntrThreshold' set but not used [-Wunused-but-set-variable] 393 | int fifo_depth, writeIntrThreshold, readIntrThreshold; | ^~~~~~~~~~~~~~~~~ ppdirectinit.c:393:25: warning: variable 'writeIntrThreshold' set but not used [-Wunused-but-set-variable] 393 | int fifo_depth, writeIntrThreshold, readIntrThreshold; | ^~~~~~~~~~~~~~~~~~ eppfpga.c: In function 'main': eppfpga.c:140:53: warning: variable 'ppdev' set but not used [-Wunused-but-set-variable] 140 | const char *ppuser = NULL, *ppkdrv = NULL, *ppdev = NULL; | ^~~~~ eppfpga.c:140:37: warning: variable 'ppkdrv' set but not used [-Wunused-but-set-variable] 140 | const char *ppuser = NULL, *ppkdrv = NULL, *ppdev = NULL; | ^~~~~~ eppfpga.c:140:21: warning: variable 'ppuser' set but not used [-Wunused-but-set-variable] 140 | const char *ppuser = NULL, *ppkdrv = NULL, *ppdev = NULL; | ^~~~~~ eppfpga.c:139:67: warning: variable 'w9xring0' set but not used [-Wunused-but-set-variable] 139 | unsigned int iobase = 0x378, ntddkgenport = 0, ntdrv = 0, w9xring0 = 0, ppflags = 0; | ^~~~~~~~ eppfpga.c:139:56: warning: variable 'ntdrv' set but not used [-Wunused-but-set-variable] 139 | unsigned int iobase = 0x378, ntddkgenport = 0, ntdrv = 0, w9xring0 = 0, ppflags = 0; | ^~~~~ eppfpga.c:139:38: warning: variable 'ntddkgenport' set but not used [-Wunused-but-set-variable] 139 | unsigned int iobase = 0x378, ntddkgenport = 0, ntdrv = 0, w9xring0 = 0, ppflags = 0; | ^~~~~~~~~~~~ fpgatests.c: In function 'ledtest': fpgatests.c:319:21: warning: operation on 'led' may be undefined [-Wsequence-point] 319 | led = (++led) & 3; | ~~~~^~~~~~~~~~~~~ fpgatests.c: In function 'chkledtest': fpgatests.c:579:21: warning: operation on 'led' may be undefined [-Wsequence-point] 579 | led = (++led) & 3; | ~~~~^~~~~~~~~~~~~ fpgatests.c: In function 'eppafskmodemtest': fpgatests.c:1414:29: warning: variable 'txbyte' set but not used [-Wunused-but-set-variable] 1414 | unsigned char stat, txbyte; | ^~~~~~ fpgatests.c: In function 'sppafskmodemtest': fpgatests.c:1600:29: warning: variable 'txbyte' set but not used [-Wunused-but-set-variable] 1600 | unsigned char stat, txbyte; | ^~~~~~ mv -f .deps/eppfpga.Tpo .deps/eppfpga.Po mv -f .deps/ppdirectinit.Tpo .deps/ppdirectinit.Po mv -f .deps/snprintpkt.Tpo .deps/snprintpkt.Po mv -f .deps/ppdirect.Tpo .deps/ppdirect.Po rm -f libresident.a ar cru libresident.a ppdirect.o snprintpkt.o ar: `u' modifier ignored since `D' is the default (see `U') ranlib libresident.a mv -f .deps/configfpga.Tpo .deps/configfpga.Po mv -f .deps/fpgatests.Tpo .deps/fpgatests.Po rm -f libinit.a ar cru libinit.a fpgatests.o configfpga.o ppdirectinit.o ar: `u' modifier ignored since `D' is the default (see `U') ranlib libinit.a i686-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/baycomepp-0.10=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,defs -Wall -Wl,-z,relro -Wl,-z,now -o eppfpga eppfpga.o libinit.a libresident.a libresident2.a libmisc.a -lm make[3]: Leaving directory '/build/reproducible-path/baycomepp-0.10/main' Making all in udriver make[3]: Entering directory '/build/reproducible-path/baycomepp-0.10/udriver' i686-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I.. -I../main -DCONFIGDIR=\"/usr/etc\" -DLOCALSTATEDIR=\"/usr/var\" -fPIC -DPIC -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/baycomepp-0.10=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,defs -Wall -MT drvresident.o -MD -MP -MF .deps/drvresident.Tpo -c -o drvresident.o drvresident.c i686-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I.. -I../main -DCONFIGDIR=\"/usr/etc\" -DLOCALSTATEDIR=\"/usr/var\" -fPIC -DPIC -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/baycomepp-0.10=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,defs -Wall -MT drvinit.o -MD -MP -MF .deps/drvinit.Tpo -c -o drvinit.o drvinit.c drvresident.c:51: warning: "only_inline" redefined 51 | #define only_inline extern inline | In file included from drv.h:42, from drvresident.c:46: ../main/fpga.h:43: note: this is the location of the previous definition 43 | #define only_inline inline | drvresident.c: In function 'do_rxpacket': drvresident.c:312:25: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] 312 | iov[0].iov_base = &kissdata; | ^ drvresident.c: In function 'kiss_read': drvresident.c:674:14: warning: pointer targets in assignment from 'u_int8_t *' {aka 'unsigned char *'} to 'char *' differ in signedness [-Wpointer-sign] 674 | endp = state.kissin.b + state.kissin.ptr; | ^ drvresident.c:683:32: warning: pointer targets in passing argument 1 of 'kiss_decode' differ in signedness [-Wpointer-sign] 683 | kiss_decode(cp1+1, cp2-cp1-1); | ~~~^~ | | | char * drvresident.c:625:40: note: expected 'u_int8_t *' {aka 'unsigned char *'} but argument is of type 'char *' 625 | only_inline void kiss_decode(u_int8_t *b, int len) | ~~~~~~~~~~^ mv -f .deps/drvinit.Tpo .deps/drvinit.Po rm -f libdrvinit.a i686-linux-gnu-gcc -shared -Wl,-soname -Wl,baycomfpga_init.so -o baycomfpga_init.so drvinit.o ../main/libinit.a ar cru libdrvinit.a drvinit.o ar: `u' modifier ignored since `D' is the default (see `U') ranlib libdrvinit.a mv -f .deps/drvresident.Tpo .deps/drvresident.Po i686-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/baycomepp-0.10=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,defs -Wall -rdynamic -Wl,-Map -Wl,baycomepp.map -Wl,-z,relro -Wl,-z,now -o baycomepp drvresident.o ../main/libresident.a ../main/libmisc.a -lutil -ldl -lm make[3]: Leaving directory '/build/reproducible-path/baycomepp-0.10/udriver' Making all in eppdiag make[3]: Entering directory '/build/reproducible-path/baycomepp-0.10/eppdiag' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/build/reproducible-path/baycomepp-0.10/eppdiag' Making all in eppfm make[3]: Entering directory '/build/reproducible-path/baycomepp-0.10/eppfm' i686-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I.. -I../main -DCONFIGDIR=\"/usr/etc\" -DLOCALSTATEDIR=\"/usr/var\" -I../directx/include -I../directx/include/directx6 -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/baycomepp-0.10=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,defs -Wall -MT gentbl.o -MD -MP -MF .deps/gentbl.Tpo -c -o gentbl.o gentbl.c mv -f .deps/gentbl.Tpo .deps/gentbl.Po i686-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/baycomepp-0.10=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,defs -Wall -Wl,-z,relro -Wl,-z,now -o gentbl gentbl.o -lm ./gentbl ./costab.c make all-am make[4]: Entering directory '/build/reproducible-path/baycomepp-0.10/eppfm' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/build/reproducible-path/baycomepp-0.10/eppfm' make[3]: Leaving directory '/build/reproducible-path/baycomepp-0.10/eppfm' Making all in eppfm2 make[3]: Entering directory '/build/reproducible-path/baycomepp-0.10/eppfm2' Making all in src make[4]: Entering directory '/build/reproducible-path/baycomepp-0.10/eppfm2/src' i686-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../intl -I../../main -I../../directx/include -I../../directx/include/directx6 -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/baycomepp-0.10=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,defs -Wall -MT gentbl.o -MD -MP -MF .deps/gentbl.Tpo -c -o gentbl.o gentbl.c mv -f .deps/gentbl.Tpo .deps/gentbl.Po i686-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/baycomepp-0.10=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,defs -Wall -Wl,-z,relro -Wl,-z,now -o gentbl gentbl.o -lm ./gentbl ./costab.c make all-am make[5]: Entering directory '/build/reproducible-path/baycomepp-0.10/eppfm2/src' make[5]: Nothing to be done for 'all-am'. make[5]: Leaving directory '/build/reproducible-path/baycomepp-0.10/eppfm2/src' make[4]: Leaving directory '/build/reproducible-path/baycomepp-0.10/eppfm2/src' make[4]: Entering directory '/build/reproducible-path/baycomepp-0.10/eppfm2' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/build/reproducible-path/baycomepp-0.10/eppfm2' make[3]: Leaving directory '/build/reproducible-path/baycomepp-0.10/eppfm2' Making all in flexdrv make[3]: Entering directory '/build/reproducible-path/baycomepp-0.10/flexdrv' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/build/reproducible-path/baycomepp-0.10/flexdrv' Making all in w9xdrv make[3]: Entering directory '/build/reproducible-path/baycomepp-0.10/w9xdrv' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/build/reproducible-path/baycomepp-0.10/w9xdrv' make[3]: Entering directory '/build/reproducible-path/baycomepp-0.10' make[3]: Leaving directory '/build/reproducible-path/baycomepp-0.10' make[2]: Leaving directory '/build/reproducible-path/baycomepp-0.10' make[1]: Leaving directory '/build/reproducible-path/baycomepp-0.10' dh_auto_test make -j22 check "TESTSUITEFLAGS=-j22 --verbose" VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/baycomepp-0.10' Making check in directx make[2]: Entering directory '/build/reproducible-path/baycomepp-0.10/directx' make check-am make[3]: Entering directory '/build/reproducible-path/baycomepp-0.10/directx' make[3]: Nothing to be done for 'check-am'. make[3]: Leaving directory '/build/reproducible-path/baycomepp-0.10/directx' make[2]: Leaving directory '/build/reproducible-path/baycomepp-0.10/directx' Making check in main make[2]: Entering directory '/build/reproducible-path/baycomepp-0.10/main' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/build/reproducible-path/baycomepp-0.10/main' Making check in udriver make[2]: Entering directory '/build/reproducible-path/baycomepp-0.10/udriver' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/build/reproducible-path/baycomepp-0.10/udriver' Making check in eppdiag make[2]: Entering directory '/build/reproducible-path/baycomepp-0.10/eppdiag' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/build/reproducible-path/baycomepp-0.10/eppdiag' Making check in eppfm make[2]: Entering directory '/build/reproducible-path/baycomepp-0.10/eppfm' make check-am make[3]: Entering directory '/build/reproducible-path/baycomepp-0.10/eppfm' make[3]: Nothing to be done for 'check-am'. make[3]: Leaving directory '/build/reproducible-path/baycomepp-0.10/eppfm' make[2]: Leaving directory '/build/reproducible-path/baycomepp-0.10/eppfm' Making check in eppfm2 make[2]: Entering directory '/build/reproducible-path/baycomepp-0.10/eppfm2' Making check in src make[3]: Entering directory '/build/reproducible-path/baycomepp-0.10/eppfm2/src' make check-am make[4]: Entering directory '/build/reproducible-path/baycomepp-0.10/eppfm2/src' make[4]: Nothing to be done for 'check-am'. make[4]: Leaving directory '/build/reproducible-path/baycomepp-0.10/eppfm2/src' make[3]: Leaving directory '/build/reproducible-path/baycomepp-0.10/eppfm2/src' make[3]: Entering directory '/build/reproducible-path/baycomepp-0.10/eppfm2' make[3]: Nothing to be done for 'check-am'. make[3]: Leaving directory '/build/reproducible-path/baycomepp-0.10/eppfm2' make[2]: Leaving directory '/build/reproducible-path/baycomepp-0.10/eppfm2' Making check in flexdrv make[2]: Entering directory '/build/reproducible-path/baycomepp-0.10/flexdrv' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/build/reproducible-path/baycomepp-0.10/flexdrv' Making check in w9xdrv make[2]: Entering directory '/build/reproducible-path/baycomepp-0.10/w9xdrv' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/build/reproducible-path/baycomepp-0.10/w9xdrv' make[2]: Entering directory '/build/reproducible-path/baycomepp-0.10' make[2]: Leaving directory '/build/reproducible-path/baycomepp-0.10' make[1]: Leaving directory '/build/reproducible-path/baycomepp-0.10' create-stamp debian/debhelper-build-stamp dh_prep dh_installdirs dh_auto_install --destdir=debian/baycomepp/ make -j22 install DESTDIR=/build/reproducible-path/baycomepp-0.10/debian/baycomepp AM_UPDATE_INFO_DIR=no make[1]: Entering directory '/build/reproducible-path/baycomepp-0.10' Making install in directx make[2]: Entering directory '/build/reproducible-path/baycomepp-0.10/directx' make install-am make[3]: Entering directory '/build/reproducible-path/baycomepp-0.10/directx' make[4]: Entering directory '/build/reproducible-path/baycomepp-0.10/directx' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/build/reproducible-path/baycomepp-0.10/directx' make[3]: Leaving directory '/build/reproducible-path/baycomepp-0.10/directx' make[2]: Leaving directory '/build/reproducible-path/baycomepp-0.10/directx' Making install in main make[2]: Entering directory '/build/reproducible-path/baycomepp-0.10/main' make[3]: Entering directory '/build/reproducible-path/baycomepp-0.10/main' /usr/bin/mkdir -p '/build/reproducible-path/baycomepp-0.10/debian/baycomepp/usr/sbin' /usr/bin/mkdir -p '/build/reproducible-path/baycomepp-0.10/debian/baycomepp/usr/share/man/man8' /usr/bin/install -c eppfpga '/build/reproducible-path/baycomepp-0.10/debian/baycomepp/usr/sbin' /usr/bin/install -c -m 644 eppfpga.8 '/build/reproducible-path/baycomepp-0.10/debian/baycomepp/usr/share/man/man8' make[3]: Leaving directory '/build/reproducible-path/baycomepp-0.10/main' make[2]: Leaving directory '/build/reproducible-path/baycomepp-0.10/main' Making install in udriver make[2]: Entering directory '/build/reproducible-path/baycomepp-0.10/udriver' make[3]: Entering directory '/build/reproducible-path/baycomepp-0.10/udriver' /usr/bin/mkdir -p '/build/reproducible-path/baycomepp-0.10/debian/baycomepp/usr/lib' /usr/bin/mkdir -p '/build/reproducible-path/baycomepp-0.10/debian/baycomepp/usr/sbin' /usr/bin/mkdir -p '/build/reproducible-path/baycomepp-0.10/debian/baycomepp/usr/share/man/man8' /usr/bin/install -c baycomfpga_init.so '/build/reproducible-path/baycomepp-0.10/debian/baycomepp/usr/lib' /usr/bin/install -c baycomepp '/build/reproducible-path/baycomepp-0.10/debian/baycomepp/usr/sbin' /usr/bin/install -c -m 644 baycomepp.8 '/build/reproducible-path/baycomepp-0.10/debian/baycomepp/usr/share/man/man8' make[3]: Leaving directory '/build/reproducible-path/baycomepp-0.10/udriver' make[2]: Leaving directory '/build/reproducible-path/baycomepp-0.10/udriver' Making install in eppdiag make[2]: Entering directory '/build/reproducible-path/baycomepp-0.10/eppdiag' make[3]: Entering directory '/build/reproducible-path/baycomepp-0.10/eppdiag' make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/build/reproducible-path/baycomepp-0.10/eppdiag' make[2]: Leaving directory '/build/reproducible-path/baycomepp-0.10/eppdiag' Making install in eppfm make[2]: Entering directory '/build/reproducible-path/baycomepp-0.10/eppfm' make install-am make[3]: Entering directory '/build/reproducible-path/baycomepp-0.10/eppfm' make[4]: Entering directory '/build/reproducible-path/baycomepp-0.10/eppfm' make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/build/reproducible-path/baycomepp-0.10/eppfm' make[3]: Leaving directory '/build/reproducible-path/baycomepp-0.10/eppfm' make[2]: Leaving directory '/build/reproducible-path/baycomepp-0.10/eppfm' Making install in eppfm2 make[2]: Entering directory '/build/reproducible-path/baycomepp-0.10/eppfm2' Making install in src make[3]: Entering directory '/build/reproducible-path/baycomepp-0.10/eppfm2/src' make install-am make[4]: Entering directory '/build/reproducible-path/baycomepp-0.10/eppfm2/src' make[5]: Entering directory '/build/reproducible-path/baycomepp-0.10/eppfm2/src' make[5]: Nothing to be done for 'install-data-am'. make[5]: Leaving directory '/build/reproducible-path/baycomepp-0.10/eppfm2/src' make[4]: Leaving directory '/build/reproducible-path/baycomepp-0.10/eppfm2/src' make[3]: Leaving directory '/build/reproducible-path/baycomepp-0.10/eppfm2/src' make[3]: Entering directory '/build/reproducible-path/baycomepp-0.10/eppfm2' make[4]: Entering directory '/build/reproducible-path/baycomepp-0.10/eppfm2' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/build/reproducible-path/baycomepp-0.10/eppfm2' make[3]: Leaving directory '/build/reproducible-path/baycomepp-0.10/eppfm2' make[2]: Leaving directory '/build/reproducible-path/baycomepp-0.10/eppfm2' Making install in flexdrv make[2]: Entering directory '/build/reproducible-path/baycomepp-0.10/flexdrv' make[3]: Entering directory '/build/reproducible-path/baycomepp-0.10/flexdrv' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/build/reproducible-path/baycomepp-0.10/flexdrv' make[2]: Leaving directory '/build/reproducible-path/baycomepp-0.10/flexdrv' Making install in w9xdrv make[2]: Entering directory '/build/reproducible-path/baycomepp-0.10/w9xdrv' make[3]: Entering directory '/build/reproducible-path/baycomepp-0.10/w9xdrv' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/build/reproducible-path/baycomepp-0.10/w9xdrv' make[2]: Leaving directory '/build/reproducible-path/baycomepp-0.10/w9xdrv' make[2]: Entering directory '/build/reproducible-path/baycomepp-0.10' make[3]: Entering directory '/build/reproducible-path/baycomepp-0.10' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/build/reproducible-path/baycomepp-0.10' make[2]: Leaving directory '/build/reproducible-path/baycomepp-0.10' make[1]: Leaving directory '/build/reproducible-path/baycomepp-0.10' dh_installdocs dh_installchangelogs dh_installexamples dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dpkg-shlibdeps: warning: symbol parport_direct_ops used by debian/baycomepp/usr/lib/baycomfpga_init.so found in none of the libraries dpkg-shlibdeps: warning: symbol errstr used by debian/baycomepp/usr/lib/baycomfpga_init.so found in none of the libraries dpkg-shlibdeps: warning: symbol logpackets used by debian/baycomepp/usr/lib/baycomfpga_init.so found in none of the libraries dpkg-shlibdeps: warning: symbol pp_direct_epp_clear_timeout used by debian/baycomepp/usr/lib/baycomfpga_init.so found in none of the libraries dpkg-shlibdeps: warning: symbol logging used by debian/baycomepp/usr/lib/baycomfpga_init.so found in none of the libraries dpkg-shlibdeps: warning: symbol pp_direct_iobase used by debian/baycomepp/usr/lib/baycomfpga_init.so found in none of the libraries dpkg-shlibdeps: warning: symbol sin used by debian/baycomepp/usr/lib/baycomfpga_init.so found in none of the libraries dpkg-shlibdeps: warning: symbol errprintf used by debian/baycomepp/usr/lib/baycomfpga_init.so found in none of the libraries dpkg-shlibdeps: warning: symbol sig_usr1 used by debian/baycomepp/usr/lib/baycomfpga_init.so found in none of the libraries dpkg-shlibdeps: warning: symbol parport_direct_emul_ops used by debian/baycomepp/usr/lib/baycomfpga_init.so found in none of the libraries dpkg-shlibdeps: warning: 7 other similar warnings have been skipped (use -v to see them all) dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'baycomepp' in '../baycomepp_0.10-18_i386.deb'. dpkg-deb: building package 'baycomepp-dbgsym' in '../baycomepp-dbgsym_0.10-18_i386.deb'. dpkg-genbuildinfo --build=binary -O../baycomepp_0.10-18_i386.buildinfo dpkg-genchanges --build=binary -O../baycomepp_0.10-18_i386.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/117628 and its subdirectories I: Current time: Tue Jun 3 21:08:20 -12 2025 I: pbuilder-time-stamp: 1749028100 Thu May 2 02:45:23 UTC 2024 I: 1st build successful. Starting 2nd build on remote node ionos12-i386.debian.net. Thu May 2 02:45:23 UTC 2024 I: Preparing to do remote build '2' on ionos12-i386.debian.net. Thu May 2 02:46:30 UTC 2024 I: Deleting $TMPDIR on ionos12-i386.debian.net. Thu May 2 02:46:30 UTC 2024 I: baycomepp_0.10-18_i386.changes: Format: 1.8 Date: Wed, 24 Apr 2024 22:09:14 +0200 Source: baycomepp Binary: baycomepp baycomepp-dbgsym Architecture: i386 Version: 0.10-18 Distribution: unstable Urgency: medium Maintainer: Debian Hamradio Maintainers Changed-By: Patrick Winnertz Description: baycomepp - Drivers for the HB9JNX packet radio epp modem Closes: 1066372 Changes: baycomepp (0.10-18) unstable; urgency=medium . * Team upload * Add a patch for the FTBFS due to a missing declaration of strcmp (Closes: #1066372) * Bump standards version to 4.7.0 - no changes needed. * Include hardening=+all, so at least two files get hardened now. Checksums-Sha1: 8f0ba3336c7949a8276775249e5dd47f0b4da3a7 299472 baycomepp-dbgsym_0.10-18_i386.deb 4d5efc027d27ee93f32b17be2452d7f0d3a5bccd 5102 baycomepp_0.10-18_i386.buildinfo 19326e5862a90435fb8cd9e6ac8825cf672ff0ec 102576 baycomepp_0.10-18_i386.deb Checksums-Sha256: 65f2d84adeddb847cc2c3807d40631676b7d2f972d1e5cfe53cd5c64702bdf53 299472 baycomepp-dbgsym_0.10-18_i386.deb 44f1eafa23e78b1cd0bf0ab2c41516a3992b1229faf2891dde7c09ce69e5b8ab 5102 baycomepp_0.10-18_i386.buildinfo 576012dfdf0496a5a5e9c7d05fcfc0b5ca0db86a44d696fd6b594c09599dcb52 102576 baycomepp_0.10-18_i386.deb Files: 5d42d0218eee4e0be3fe486a6e2fbd78 299472 debug optional baycomepp-dbgsym_0.10-18_i386.deb 371a791b9669d5883fd6d913a9db2429 5102 hamradio optional baycomepp_0.10-18_i386.buildinfo 6866c4b9323793cf06f2a6101b2621ae 102576 hamradio optional baycomepp_0.10-18_i386.deb Thu May 2 02:46:32 UTC 2024 I: diffoscope 265 will be used to compare the two builds: Running as unit: rb-diffoscope-i386_6-23185.service # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.TiiIFQ0T/baycomepp_0.10-18.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.TiiIFQ0T/baycomepp_0.10-18.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.TiiIFQ0T/baycomepp_0.10-18.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.TiiIFQ0T/b1/baycomepp_0.10-18_i386.changes /srv/reproducible-results/rbuild-debian/r-b-build.TiiIFQ0T/b2/baycomepp_0.10-18_i386.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.419s) 0.419s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.020s) 0.020s 12 calls diffoscope.comparators.binary.FilesystemFile ## specialize (total time: 0.000s) 0.000s 1 call specialize Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 785ms CPU time consumed: 783ms Thu May 2 02:46:33 UTC 2024 I: diffoscope 265 found no differences in the changes files, and a .buildinfo file also exists. Thu May 2 02:46:33 UTC 2024 I: baycomepp from trixie built successfully and reproducibly on i386. Thu May 2 02:46:34 UTC 2024 I: Submitting .buildinfo files to external archives: Thu May 2 02:46:34 UTC 2024 I: Submitting 8.0K b1/baycomepp_0.10-18_i386.buildinfo.asc Thu May 2 02:46:37 UTC 2024 I: Submitting 8.0K b2/baycomepp_0.10-18_i386.buildinfo.asc Thu May 2 02:46:39 UTC 2024 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Thu May 2 02:46:39 UTC 2024 I: Done submitting .buildinfo files. Thu May 2 02:46:39 UTC 2024 I: Removing signed baycomepp_0.10-18_i386.buildinfo.asc files: removed './b1/baycomepp_0.10-18_i386.buildinfo.asc' removed './b2/baycomepp_0.10-18_i386.buildinfo.asc'