Thu May 2 12:40:55 UTC 2024 I: starting to build wavemon/trixie/armhf on jenkins on '2024-05-02 12:40' Thu May 2 12:40:55 UTC 2024 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/armhf_17/4781/console.log Thu May 2 12:40:55 UTC 2024 I: Downloading source for trixie/wavemon=0.9.1-1 --2024-05-02 12:40:56-- http://deb.debian.org/debian/pool/main/w/wavemon/wavemon_0.9.1-1.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 1853 (1.8K) [text/prs.lines.tag] Saving to: ‘wavemon_0.9.1-1.dsc’ 0K . 100% 241M=0s 2024-05-02 12:40:56 (241 MB/s) - ‘wavemon_0.9.1-1.dsc’ saved [1853/1853] Thu May 2 12:40:56 UTC 2024 I: wavemon_0.9.1-1.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: wavemon Binary: wavemon Architecture: linux-any Version: 0.9.1-1 Maintainer: Jonathan McCrohan Homepage: https://github.com/uoaerg/wavemon/ Standards-Version: 4.5.0 Build-Depends: libncurses5-dev, debhelper (>= 13), linux-libc-dev, libnl-3-dev, libnl-genl-3-dev, pkg-config, debhelper-compat (= 13) Package-List: wavemon deb net optional arch=linux-any Checksums-Sha1: e7ee991f4aa0053b3f52563e0b25104e4d07619a 209240 wavemon_0.9.1.orig.tar.gz 35f482b5113ee2abd9cb85732d7ba2b3daa8c17d 5476 wavemon_0.9.1-1.debian.tar.xz Checksums-Sha256: 5ebd5b79d3b7c546bc16b95161872c699a75e9acdfc6e3f02ec48dad10802067 209240 wavemon_0.9.1.orig.tar.gz 0c5426cb5012dd201f99ca281d308a2f2d3b600c4d47747115ed8c462f5aaf44 5476 wavemon_0.9.1-1.debian.tar.xz Files: 8ae6533815fb85dfabf2ba4a7475dea7 209240 wavemon_0.9.1.orig.tar.gz 514f11580afad30bb25120702378c071 5476 wavemon_0.9.1-1.debian.tar.xz -----BEGIN PGP SIGNATURE----- Comment: Signed by Jonathan McCrohan iQIzBAEBCgAdFiEEYVD3Fun+4NEVsHPrFW7sBzetMpYFAl8iCuYACgkQFW7sBzet MpZjzw//dkbr+fNE+JR/rXTIf2kX55hZOLTir/dzQntGiPYfgsuCBk1j9wB+EX9h 7apXYhK2jci0w7m9026VjRQHDwQyMKvZiWYno6cEOLqKw8OUPsnIM0pStUagjQrf NqMHNIQFy/DyZ4DwsX9ahDdolLTvv9qz5CxaWVKXPb2pOKFxl6U3W5F4IYKSs9UT lw8eclv7gr1Vyc7OvbegHTe5K8bsX4CGHjak7m4A1IriuVx+hk63U+qSqBr0P253 GL54Y3SAzCugGx9gN1DNiJti6RSkKwaOxx/WVE4tPPO8yzfEdtYi/LhG10rSGxu8 3aFZUIX3gTue2SpcV4+YNg0jO3t/ZVRuYOv2uiVv7ZXdLrc0pcD7nDYFd2wpCNco yvO51pJ8B8DOsLDnVR8Y7zyDHBcobUOO5OlHTuVTGpqAzwe0Z5w20msxocKaKvUE 9klh+gm2tNFEwSycGS8Pz8C4gn23P0WeovotEqFbyqICt/tkARtZfOJ3Fz6mGnLB n26OircEuEV44DQvC9FFbNFH7IzNWIgQU5vMzk0TztkLWbGm7BOStQNgfkhVWyGp Hes2K7XSNzNntlO/Suw1H1ZLFJ6q0wy7Ugf1NsXUdcmllZfs+d2ES3q5k354hO1l ZagQn7DdVoH4Slix6e+0FD6rHrL030HJ4KL/ZjiXWJnoTXvj68w= =Lfwn -----END PGP SIGNATURE----- Thu May 2 12:40:56 UTC 2024 I: Checking whether the package is not for us Thu May 2 12:40:56 UTC 2024 I: Starting 1st build on remote node virt32b-armhf-rb.debian.net. Thu May 2 12:40:56 UTC 2024 I: Preparing to do remote build '1' on virt32b-armhf-rb.debian.net. Thu May 2 12:43:14 UTC 2024 I: Deleting $TMPDIR on virt32b-armhf-rb.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Thu May 2 00:41:03 -12 2024 I: pbuilder-time-stamp: 1714653663 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [wavemon_0.9.1-1.dsc] I: copying [./wavemon_0.9.1.orig.tar.gz] I: copying [./wavemon_0.9.1-1.debian.tar.xz] I: Extracting source gpgv: Signature made Wed Jul 29 23:48:54 2020 gpgv: using RSA key 6150F716E9FEE0D115B073EB156EEC0737AD3296 gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./wavemon_0.9.1-1.dsc: no acceptable signature found dpkg-source: info: extracting wavemon in wavemon-0.9.1 dpkg-source: info: unpacking wavemon_0.9.1.orig.tar.gz dpkg-source: info: unpacking wavemon_0.9.1-1.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying 01-patch-makefile.in-to-not-install-docs.patch dpkg-source: info: applying 02-honour-CC.patch I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/32035/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='armhf' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=3 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='armhf' IFS=' ' INVOCATION_ID='466543210a204160bdecc32371f28efc' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='32035' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.GD0FxNCq/pbuilderrc_goi2 --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.GD0FxNCq/b1 --logfile b1/build.log wavemon_0.9.1-1.dsc' SUDO_GID='112' SUDO_UID='106' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://10.0.0.15:3142/' I: uname -a Linux virt32b 6.1.0-20-armmp-lpae #1 SMP Debian 6.1.85-1 (2024-04-11) armv7l GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 May 2 11:25 /bin -> usr/bin I: user script /srv/workspace/pbuilder/32035/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: armhf Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: libncurses5-dev, debhelper (>= 13), linux-libc-dev, libnl-3-dev, libnl-genl-3-dev, pkg-config, debhelper-compat (= 13) dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19444 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on libncurses5-dev; however: Package libncurses5-dev is not installed. pbuilder-satisfydepends-dummy depends on debhelper (>= 13); however: Package debhelper is not installed. pbuilder-satisfydepends-dummy depends on libnl-3-dev; however: Package libnl-3-dev is not installed. pbuilder-satisfydepends-dummy depends on libnl-genl-3-dev; however: Package libnl-genl-3-dev is not installed. pbuilder-satisfydepends-dummy depends on pkg-config; however: Package pkg-config is not installed. pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libicu72{a} libmagic-mgc{a} libmagic1t64{a} libncurses-dev{a} libncurses6{a} libnl-3-200{a} libnl-3-dev{a} libnl-genl-3-200{a} libnl-genl-3-dev{a} libpipeline1{a} libpkgconf3{a} libsub-override-perl{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} pkg-config{a} pkgconf{a} pkgconf-bin{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libgpm2 libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 40 newly installed, 0 to remove and 0 not upgraded. Need to get 19.0 MB of archives. After unpacking 71.6 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main armhf sensible-utils all 0.0.22 [22.4 kB] Get: 2 http://deb.debian.org/debian trixie/main armhf libmagic-mgc armhf 1:5.45-3 [314 kB] Get: 3 http://deb.debian.org/debian trixie/main armhf libmagic1t64 armhf 1:5.45-3 [98.1 kB] Get: 4 http://deb.debian.org/debian trixie/main armhf file armhf 1:5.45-3 [42.0 kB] Get: 5 http://deb.debian.org/debian trixie/main armhf gettext-base armhf 0.21-14+b1 [157 kB] Get: 6 http://deb.debian.org/debian trixie/main armhf libuchardet0 armhf 0.0.8-1+b1 [65.7 kB] Get: 7 http://deb.debian.org/debian trixie/main armhf groff-base armhf 1.23.0-3 [1088 kB] Get: 8 http://deb.debian.org/debian trixie/main armhf bsdextrautils armhf 2.40-8 [85.6 kB] Get: 9 http://deb.debian.org/debian trixie/main armhf libpipeline1 armhf 1.5.7-2 [33.3 kB] Get: 10 http://deb.debian.org/debian trixie/main armhf man-db armhf 2.12.0-3 [1367 kB] Get: 11 http://deb.debian.org/debian trixie/main armhf m4 armhf 1.4.19-4 [264 kB] Get: 12 http://deb.debian.org/debian trixie/main armhf autoconf all 2.71-3 [332 kB] Get: 13 http://deb.debian.org/debian trixie/main armhf autotools-dev all 20220109.1 [51.6 kB] Get: 14 http://deb.debian.org/debian trixie/main armhf automake all 1:1.16.5-1.3 [823 kB] Get: 15 http://deb.debian.org/debian trixie/main armhf autopoint all 0.21-14 [496 kB] Get: 16 http://deb.debian.org/debian trixie/main armhf libdebhelper-perl all 13.15.3 [88.0 kB] Get: 17 http://deb.debian.org/debian trixie/main armhf libtool all 2.4.7-7 [517 kB] Get: 18 http://deb.debian.org/debian trixie/main armhf dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian trixie/main armhf libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian trixie/main armhf libsub-override-perl all 0.10-1 [10.6 kB] Get: 21 http://deb.debian.org/debian trixie/main armhf libfile-stripnondeterminism-perl all 1.13.1-1 [19.4 kB] Get: 22 http://deb.debian.org/debian trixie/main armhf dh-strip-nondeterminism all 1.13.1-1 [8620 B] Get: 23 http://deb.debian.org/debian trixie/main armhf libelf1t64 armhf 0.191-1+b1 [183 kB] Get: 24 http://deb.debian.org/debian trixie/main armhf dwz armhf 0.15-1+b2 [106 kB] Get: 25 http://deb.debian.org/debian trixie/main armhf libicu72 armhf 72.1-4+b1 [9070 kB] Get: 26 http://deb.debian.org/debian trixie/main armhf libxml2 armhf 2.9.14+dfsg-1.3+b3 [598 kB] Get: 27 http://deb.debian.org/debian trixie/main armhf gettext armhf 0.21-14+b1 [1230 kB] Get: 28 http://deb.debian.org/debian trixie/main armhf intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 29 http://deb.debian.org/debian trixie/main armhf po-debconf all 1.0.21+nmu1 [248 kB] Get: 30 http://deb.debian.org/debian trixie/main armhf debhelper all 13.15.3 [901 kB] Get: 31 http://deb.debian.org/debian trixie/main armhf libncurses6 armhf 6.4+20240414-1 [81.8 kB] Get: 32 http://deb.debian.org/debian trixie/main armhf libncurses-dev armhf 6.4+20240414-1 [309 kB] Get: 33 http://deb.debian.org/debian trixie/main armhf libnl-3-200 armhf 3.7.0-0.3 [51.7 kB] Get: 34 http://deb.debian.org/debian trixie/main armhf libnl-3-dev armhf 3.7.0-0.3 [94.3 kB] Get: 35 http://deb.debian.org/debian trixie/main armhf libnl-genl-3-200 armhf 3.7.0-0.3 [15.9 kB] Get: 36 http://deb.debian.org/debian trixie/main armhf libnl-genl-3-dev armhf 3.7.0-0.3 [15.8 kB] Get: 37 http://deb.debian.org/debian trixie/main armhf libpkgconf3 armhf 1.8.1-1+b2 [31.9 kB] Get: 38 http://deb.debian.org/debian trixie/main armhf pkgconf-bin armhf 1.8.1-1+b2 [28.9 kB] Get: 39 http://deb.debian.org/debian trixie/main armhf pkgconf armhf 1.8.1-1+b2 [26.2 kB] Get: 40 http://deb.debian.org/debian trixie/main armhf pkg-config armhf 1.8.1-1+b2 [14.0 kB] Fetched 19.0 MB in 1s (26.5 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19444 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.22_all.deb ... Unpacking sensible-utils (0.0.22) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3_armhf.deb ... Unpacking libmagic-mgc (1:5.45-3) ... Selecting previously unselected package libmagic1t64:armhf. Preparing to unpack .../02-libmagic1t64_1%3a5.45-3_armhf.deb ... Unpacking libmagic1t64:armhf (1:5.45-3) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-3_armhf.deb ... Unpacking file (1:5.45-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.21-14+b1_armhf.deb ... Unpacking gettext-base (0.21-14+b1) ... Selecting previously unselected package libuchardet0:armhf. Preparing to unpack .../05-libuchardet0_0.0.8-1+b1_armhf.deb ... Unpacking libuchardet0:armhf (0.0.8-1+b1) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-3_armhf.deb ... Unpacking groff-base (1.23.0-3) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.40-8_armhf.deb ... Unpacking bsdextrautils (2.40-8) ... Selecting previously unselected package libpipeline1:armhf. Preparing to unpack .../08-libpipeline1_1.5.7-2_armhf.deb ... Unpacking libpipeline1:armhf (1.5.7-2) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.12.0-3_armhf.deb ... Unpacking man-db (2.12.0-3) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-4_armhf.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.71-3_all.deb ... Unpacking autoconf (2.71-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.21-14_all.deb ... Unpacking autopoint (0.21-14) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.15.3_all.deb ... Unpacking libdebhelper-perl (13.15.3) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.4.7-7_all.deb ... Unpacking libtool (2.4.7-7) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libsub-override-perl. Preparing to unpack .../19-libsub-override-perl_0.10-1_all.deb ... Unpacking libsub-override-perl (0.10-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../20-libfile-stripnondeterminism-perl_1.13.1-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.13.1-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../21-dh-strip-nondeterminism_1.13.1-1_all.deb ... Unpacking dh-strip-nondeterminism (1.13.1-1) ... Selecting previously unselected package libelf1t64:armhf. Preparing to unpack .../22-libelf1t64_0.191-1+b1_armhf.deb ... Unpacking libelf1t64:armhf (0.191-1+b1) ... Selecting previously unselected package dwz. Preparing to unpack .../23-dwz_0.15-1+b2_armhf.deb ... Unpacking dwz (0.15-1+b2) ... Selecting previously unselected package libicu72:armhf. Preparing to unpack .../24-libicu72_72.1-4+b1_armhf.deb ... Unpacking libicu72:armhf (72.1-4+b1) ... Selecting previously unselected package libxml2:armhf. Preparing to unpack .../25-libxml2_2.9.14+dfsg-1.3+b3_armhf.deb ... Unpacking libxml2:armhf (2.9.14+dfsg-1.3+b3) ... Selecting previously unselected package gettext. Preparing to unpack .../26-gettext_0.21-14+b1_armhf.deb ... Unpacking gettext (0.21-14+b1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../27-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../28-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../29-debhelper_13.15.3_all.deb ... Unpacking debhelper (13.15.3) ... Selecting previously unselected package libncurses6:armhf. Preparing to unpack .../30-libncurses6_6.4+20240414-1_armhf.deb ... Unpacking libncurses6:armhf (6.4+20240414-1) ... Selecting previously unselected package libncurses-dev:armhf. Preparing to unpack .../31-libncurses-dev_6.4+20240414-1_armhf.deb ... Unpacking libncurses-dev:armhf (6.4+20240414-1) ... Selecting previously unselected package libnl-3-200:armhf. Preparing to unpack .../32-libnl-3-200_3.7.0-0.3_armhf.deb ... Unpacking libnl-3-200:armhf (3.7.0-0.3) ... Selecting previously unselected package libnl-3-dev:armhf. Preparing to unpack .../33-libnl-3-dev_3.7.0-0.3_armhf.deb ... Unpacking libnl-3-dev:armhf (3.7.0-0.3) ... Selecting previously unselected package libnl-genl-3-200:armhf. Preparing to unpack .../34-libnl-genl-3-200_3.7.0-0.3_armhf.deb ... Unpacking libnl-genl-3-200:armhf (3.7.0-0.3) ... Selecting previously unselected package libnl-genl-3-dev:armhf. Preparing to unpack .../35-libnl-genl-3-dev_3.7.0-0.3_armhf.deb ... Unpacking libnl-genl-3-dev:armhf (3.7.0-0.3) ... Selecting previously unselected package libpkgconf3:armhf. Preparing to unpack .../36-libpkgconf3_1.8.1-1+b2_armhf.deb ... Unpacking libpkgconf3:armhf (1.8.1-1+b2) ... Selecting previously unselected package pkgconf-bin. Preparing to unpack .../37-pkgconf-bin_1.8.1-1+b2_armhf.deb ... Unpacking pkgconf-bin (1.8.1-1+b2) ... Selecting previously unselected package pkgconf:armhf. Preparing to unpack .../38-pkgconf_1.8.1-1+b2_armhf.deb ... Unpacking pkgconf:armhf (1.8.1-1+b2) ... Selecting previously unselected package pkg-config:armhf. Preparing to unpack .../39-pkg-config_1.8.1-1+b2_armhf.deb ... Unpacking pkg-config:armhf (1.8.1-1+b2) ... Setting up libpipeline1:armhf (1.5.7-2) ... Setting up libicu72:armhf (72.1-4+b1) ... Setting up bsdextrautils (2.40-8) ... Setting up libmagic-mgc (1:5.45-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.15.3) ... Setting up libmagic1t64:armhf (1:5.45-3) ... Setting up gettext-base (0.21-14+b1) ... Setting up m4 (1.4.19-4) ... Setting up file (1:5.45-3) ... Setting up libelf1t64:armhf (0.191-1+b1) ... Setting up autotools-dev (20220109.1) ... Setting up libpkgconf3:armhf (1.8.1-1+b2) ... Setting up libncurses6:armhf (6.4+20240414-1) ... Setting up autopoint (0.21-14) ... Setting up pkgconf-bin (1.8.1-1+b2) ... Setting up autoconf (2.71-3) ... Setting up dwz (0.15-1+b2) ... Setting up sensible-utils (0.0.22) ... Setting up libuchardet0:armhf (0.0.8-1+b1) ... Setting up libnl-3-200:armhf (3.7.0-0.3) ... Setting up libsub-override-perl (0.10-1) ... Setting up libxml2:armhf (2.9.14+dfsg-1.3+b3) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.13.1-1) ... Setting up libncurses-dev:armhf (6.4+20240414-1) ... Setting up gettext (0.21-14+b1) ... Setting up libtool (2.4.7-7) ... Setting up pkgconf:armhf (1.8.1-1+b2) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up pkg-config:armhf (1.8.1-1+b2) ... Setting up dh-strip-nondeterminism (1.13.1-1) ... Setting up libnl-3-dev:armhf (3.7.0-0.3) ... Setting up groff-base (1.23.0-3) ... Setting up libnl-genl-3-200:armhf (3.7.0-0.3) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.12.0-3) ... Not building database; man-db/auto-update is not 'true'. Setting up libnl-genl-3-dev:armhf (3.7.0-0.3) ... Setting up debhelper (13.15.3) ... Processing triggers for libc-bin (2.37-18) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/reproducible-path/wavemon-0.9.1/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../wavemon_0.9.1-1_source.changes dpkg-buildpackage: info: source package wavemon dpkg-buildpackage: info: source version 0.9.1-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Jonathan McCrohan dpkg-source --before-build . dpkg-buildpackage: info: host architecture armhf debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config cp: warning: behavior of -n is non-portable and may change in future; use --update=none instead cp: warning: behavior of -n is non-portable and may change in future; use --update=none instead dh_autoreconf configure.ac:26: warning: The macro `AC_HEADER_STDC' is obsolete. configure.ac:26: You should run autoupdate. ./lib/autoconf/headers.m4:704: AC_HEADER_STDC is expanded from... configure.ac:26: the top level configure.ac:27: warning: The macro `AC_HEADER_TIME' is obsolete. configure.ac:27: You should run autoupdate. ./lib/autoconf/headers.m4:743: AC_HEADER_TIME is expanded from... configure.ac:27: the top level dh_auto_configure ./configure --build=arm-linux-gnueabihf --prefix=/usr --includedir=\${prefix}/include --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info --sysconfdir=/etc --localstatedir=/var --disable-option-checking --disable-silent-rules --libdir=\${prefix}/lib/arm-linux-gnueabihf --runstatedir=/run --disable-maintainer-mode --disable-dependency-tracking checking build system type... arm-unknown-linux-gnueabihf checking host system type... arm-unknown-linux-gnueabihf checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether gcc accepts -g... yes checking for gcc option to enable C11 features... none needed checking how to run the C preprocessor... gcc -E checking for a BSD-compatible install... /usr/bin/install -c checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for sys/time.h... yes checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for ncurses.h... yes checking for fcntl.h... yes checking for netdb.h... yes checking for sys/ioctl.h... yes checking for sys/time.h... (cached) yes checking for unistd.h... (cached) yes checking for net/if_arp.h... yes checking for netinet/ether.h... yes checking for net/ethernet.h... yes checking for pthread.h... yes checking for sys/socket.h... yes checking for linux/if.h... yes checking for linux/wireless.h... yes checking for _Bool... yes checking for stdbool.h that conforms to C99... yes checking for pow in -lm... yes checking for waddstr in -lncurses... yes checking for pthread_create in -lpthread... yes checking for cap_get_flag in -lcap... no checking for gettimeofday... yes checking for ether_ntohost... yes checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for libnl-3.0 >= 3.2... yes checking for libnl-genl-3.0 >= 3.2... yes checking whether gcc needs -traditional... no checking for an ANSI C-conforming const... yes checking for inline... inline configure: creating ./config.status config.status: creating Makefile dh_auto_build make -j3 make[1]: Entering directory '/build/reproducible-path/wavemon-0.9.1' CC about_scr.c CC conf.c CC conf_scr.c CC error.c CC help_scr.c CC info_scr.c CC iw_if.c CC iw_nl80211.c iw_if.c: In function 'iw_get_interface_list': iw_if.c:163:59: warning: '%s' directive output may be truncated writing up to 8191 bytes into a region of size 16 [-Wformat-truncation=] 163 | snprintf(wrq.ifr_name, IFNAMSIZ, "%s", p); | ^~ In file included from /usr/include/stdio.h:906, from wavemon.h:22, from iw_if.h:20, from iw_if.c:20: In function 'snprintf', inlined from 'iw_get_interface_list' at iw_if.c:163:4: /usr/include/arm-linux-gnueabihf/bits/stdio2.h:54:10: note: '__builtin_snprintf' output between 1 and 8192 bytes into a destination of size 16 54 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 55 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 56 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ CC iw_scan.c CC lhist_scr.c CC llist.c CC scan_scr.c CC ui.c CC utils.c gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/wavemon-0.9.1=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -pthread -I/usr/include/libnl3 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -Wl,-z,relro -Wl,-z,now wavemon.c about_scr.o conf.o conf_scr.o error.o help_scr.o info_scr.o iw_if.o iw_nl80211.o iw_scan.o lhist_scr.o llist.o scan_scr.o ui.o utils.o -lncurses -lm -lnl-genl-3 -lnl-3 -lnl-3 -o wavemon make[1]: Leaving directory '/build/reproducible-path/wavemon-0.9.1' dh_auto_test create-stamp debian/debhelper-build-stamp dh_prep dh_installdirs dh_auto_install --destdir=debian/wavemon/ make -j3 install DESTDIR=/build/reproducible-path/wavemon-0.9.1/debian/wavemon AM_UPDATE_INFO_DIR=no make[1]: Entering directory '/build/reproducible-path/wavemon-0.9.1' /usr/bin/install -c -m 0755 -d /build/reproducible-path/wavemon-0.9.1/debian/wavemon/usr/bin /usr/bin/install -c -m 0755 -d /build/reproducible-path/wavemon-0.9.1/debian/wavemon/usr/share/man/man1 /usr/bin/install -c -m 0755 wavemon /build/reproducible-path/wavemon-0.9.1/debian/wavemon/usr/bin /usr/bin/install -c -m 0644 wavemon.1 /build/reproducible-path/wavemon-0.9.1/debian/wavemon/usr/share/man/man1 /usr/bin/install -c -m 0755 -d /build/reproducible-path/wavemon-0.9.1/debian/wavemon/usr/share/man/man5 /usr/bin/install -c -m 0644 wavemonrc.5 /build/reproducible-path/wavemon-0.9.1/debian/wavemon/usr/share/man/man5 make[1]: Leaving directory '/build/reproducible-path/wavemon-0.9.1' dh_installdocs dh_installchangelogs dh_installman dh_installmenu dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'wavemon' in '../wavemon_0.9.1-1_armhf.deb'. dpkg-deb: building package 'wavemon-dbgsym' in '../wavemon-dbgsym_0.9.1-1_armhf.deb'. dpkg-genbuildinfo --build=binary -O../wavemon_0.9.1-1_armhf.buildinfo dpkg-genchanges --build=binary -O../wavemon_0.9.1-1_armhf.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: including full source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/32035 and its subdirectories I: Current time: Thu May 2 00:43:09 -12 2024 I: pbuilder-time-stamp: 1714653789 Thu May 2 12:43:17 UTC 2024 I: 1st build successful. Starting 2nd build on remote node virt64b-armhf-rb.debian.net. Thu May 2 12:43:17 UTC 2024 I: Preparing to do remote build '2' on virt64b-armhf-rb.debian.net. Thu May 2 12:45:12 UTC 2024 I: Deleting $TMPDIR on virt64b-armhf-rb.debian.net. Thu May 2 12:45:15 UTC 2024 I: wavemon_0.9.1-1_armhf.changes: Format: 1.8 Date: Thu, 30 Jul 2020 00:44:51 +0100 Source: wavemon Binary: wavemon wavemon-dbgsym Architecture: armhf Version: 0.9.1-1 Distribution: unstable Urgency: medium Maintainer: Jonathan McCrohan Changed-By: Jonathan McCrohan Description: wavemon - Wireless Device Monitoring Application Changes: wavemon (0.9.1-1) unstable; urgency=medium . * New upstream release * d/compat: drop file in favour of Build-Dep - Build-Depend on debhelper-compat (= 13) instead * d/control: bump Standards-Version to 4.5.0 - Add Rules-Requires-Root: no * d/rules: Migrate from dpkg-parsechangelog to /usr/share/dpkg/pkg-info.mk Checksums-Sha1: db3ff313b6d13ae0793f8cac0f847eeac68f046e 104172 wavemon-dbgsym_0.9.1-1_armhf.deb 1dee1304fb62317677797ec3e890109996a6cfd1 5285 wavemon_0.9.1-1_armhf.buildinfo bbd2c06fbca0e466f29bfdb316773afe90be9fc3 46064 wavemon_0.9.1-1_armhf.deb Checksums-Sha256: e17742dd065d507bedb2a0c1291cf6fe18cd5dbab434f6d1c6bd10b11458337c 104172 wavemon-dbgsym_0.9.1-1_armhf.deb 04d2ebcfb6cb9f3de60aaacaf8c45c7934d5edc656023ea5b93870605b36421c 5285 wavemon_0.9.1-1_armhf.buildinfo ca417527fb2b5d655f5522e7c2679328119f124ade2cc967e3d1a8c01c23e795 46064 wavemon_0.9.1-1_armhf.deb Files: 4ba09323012cbb226191e3c82905c5f6 104172 debug optional wavemon-dbgsym_0.9.1-1_armhf.deb d49157dd86c826ecb12d827e4fc9d0e5 5285 net optional wavemon_0.9.1-1_armhf.buildinfo 9059c3fba2c461a2ac0cad2b4dd0c35c 46064 net optional wavemon_0.9.1-1_armhf.deb Thu May 2 12:45:16 UTC 2024 I: diffoscope 265 will be used to compare the two builds: Running as unit: rb-diffoscope-armhf_17-4781.service # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.GD0FxNCq/wavemon_0.9.1-1.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.GD0FxNCq/wavemon_0.9.1-1.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.GD0FxNCq/wavemon_0.9.1-1.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.GD0FxNCq/b1/wavemon_0.9.1-1_armhf.changes /srv/reproducible-results/rbuild-debian/r-b-build.GD0FxNCq/b2/wavemon_0.9.1-1_armhf.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.442s) 0.442s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.022s) 0.022s 12 calls diffoscope.comparators.binary.FilesystemFile ## specialize (total time: 0.000s) 0.000s 1 call specialize Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 828ms CPU time consumed: 822ms Thu May 2 12:45:18 UTC 2024 I: diffoscope 265 found no differences in the changes files, and a .buildinfo file also exists. Thu May 2 12:45:18 UTC 2024 I: wavemon from trixie built successfully and reproducibly on armhf. Thu May 2 12:45:19 UTC 2024 I: Submitting .buildinfo files to external archives: Thu May 2 12:45:19 UTC 2024 I: Submitting 8.0K b1/wavemon_0.9.1-1_armhf.buildinfo.asc Thu May 2 12:45:20 UTC 2024 I: Submitting 8.0K b2/wavemon_0.9.1-1_armhf.buildinfo.asc Thu May 2 12:45:21 UTC 2024 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Thu May 2 12:45:21 UTC 2024 I: Done submitting .buildinfo files. Thu May 2 12:45:21 UTC 2024 I: Removing signed wavemon_0.9.1-1_armhf.buildinfo.asc files: removed './b1/wavemon_0.9.1-1_armhf.buildinfo.asc' removed './b2/wavemon_0.9.1-1_armhf.buildinfo.asc'