Tue May 7 10:14:49 UTC 2024 I: starting to build user-session-migration/trixie/armhf on jenkins on '2024-05-07 10:14' Tue May 7 10:14:49 UTC 2024 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/armhf_24/4291/console.log Tue May 7 10:14:49 UTC 2024 I: Downloading source for trixie/user-session-migration=0.4.2 --2024-05-07 10:14:49-- http://deb.debian.org/debian/pool/main/u/user-session-migration/user-session-migration_0.4.2.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2043 (2.0K) [text/prs.lines.tag] Saving to: ‘user-session-migration_0.4.2.dsc’ 0K . 100% 308M=0s 2024-05-07 10:14:49 (308 MB/s) - ‘user-session-migration_0.4.2.dsc’ saved [2043/2043] Tue May 7 10:14:49 UTC 2024 I: user-session-migration_0.4.2.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Format: 3.0 (native) Source: user-session-migration Binary: user-session-migration, dh-user-session-migration Architecture: any all Version: 0.4.2 Maintainer: Ayatana Packagers Uploaders: Mike Gabriel , Jeremy Bicha , Debian UBports Team Homepage: https://launchpad.net/session-migration Standards-Version: 4.6.2 Vcs-Browser: https://salsa.debian.org/debian-ayatana-team/user-session-migration Vcs-Git: https://salsa.debian.org/debian-ayatana-team/user-session-migration.git Build-Depends: debhelper-compat (= 13), cmake (>= 2.8), libglib2.0-dev (>= 2.51.1), python3-nose Package-List: dh-user-session-migration deb misc optional arch=all user-session-migration deb misc optional arch=any Checksums-Sha1: 6ad54e7c555d75c50e9396a771e4b6a0a0b46be6 13892 user-session-migration_0.4.2.tar.xz Checksums-Sha256: 5416c30f2cc7e9a14ab6c1866074e9918afa4e00cdc995056b4e781d062cba0e 13892 user-session-migration_0.4.2.tar.xz Files: 1d3ffa79c93e3c7275d314921dbeca7e 13892 user-session-migration_0.4.2.tar.xz -----BEGIN PGP SIGNATURE----- iQJJBAEBCAAzFiEEm/uu6GwKpf+/IgeCmvRrMCV3GzEFAmYBYwoVHHN1bndlYXZl ckBkZWJpYW4ub3JnAAoJEJr0azAldxsxlBUP/R9j/lbXObLrF7kwv4xz+6HnA9bK IYRoubn2o13u9y32IN3J7tnzfaO43t5nP0lk8QXdJ4lU/Dml6V2CEbLveWk52BJJ nWye8Lj4IBQmMqFZXjwN9SY1CB0HzPIcrDI05wblkPFx6c2exsZuciUIGedG9jjV PQcYcHOIT1eiBOOUdf7yAKn9zmqL6uaJMTl2KvgUZdQnx59NA8acP8y1xnGElo6K 5L5w3oNSH1O26bthNGyM/B7vBAomaxx2ldo54MoB4gNY9m1pHYmvOE84DGU6g0tb BcT0pF31XCiFF8jsrQ0GnAHdry/9dB3+vvpCOJdg5ew5f7b8YZ4dIRYC15wqRxay DtDMlwZ2yE4E6h32nQjRDDUS6ktgS1i/sANVqmGcJCecY+/2UDQKOdJRz/otuiUA QqGUgY1X4rW7o5AhPbNWb65QmC3j5SnTMM9cGA8FwndnCzsEM3IAG2wFHLElS2Kp Kjctpns4rV8xVYPMxWfB1L7ry6xwqXCMkf6u388S/LdvQDawwVxP72V5FotuM+R9 0I5lCYm88vbXWB91x31BnOHMtVJCcXcllQJk/kNzNqw/FBjV4AHGwZ/HnoU9L9HM KxwoPHsBO4of50zjyfQTb6sRPn0eXUac89l6KlgcmZSNC/BC9/lqqiokzjrb6AMs xOFgaNMgPohRMPWB =oDJk -----END PGP SIGNATURE----- Tue May 7 10:14:49 UTC 2024 I: Checking whether the package is not for us Tue May 7 10:14:49 UTC 2024 I: Starting 1st build on remote node ff4a-armhf-rb.debian.net. Tue May 7 10:14:49 UTC 2024 I: Preparing to do remote build '1' on ff4a-armhf-rb.debian.net. Tue May 7 10:17:56 UTC 2024 I: Deleting $TMPDIR on ff4a-armhf-rb.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Mon May 6 22:14:57 -12 2024 I: pbuilder-time-stamp: 1715076897 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [user-session-migration_0.4.2.dsc] I: copying [./user-session-migration_0.4.2.tar.xz] I: Extracting source gpgv: Signature made Mon Mar 25 11:42:02 2024 gpgv: using RSA key 9BFBAEE86C0AA5FFBF2207829AF46B3025771B31 gpgv: issuer "sunweaver@debian.org" gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./user-session-migration_0.4.2.dsc: no acceptable signature found dpkg-source: info: extracting user-session-migration in user-session-migration-0.4.2 dpkg-source: info: unpacking user-session-migration_0.4.2.tar.xz I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/7085/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='armhf' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=3 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='armhf' IFS=' ' INVOCATION_ID='779224f8fe744a1aa12de2d91556fc48' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='7085' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.ZqQhQych/pbuilderrc_HlC3 --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.ZqQhQych/b1 --logfile b1/build.log user-session-migration_0.4.2.dsc' SUDO_GID='113' SUDO_UID='107' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://10.0.0.15:3142/' I: uname -a Linux ff4a 6.1.0-21-armmp-lpae #1 SMP Debian 6.1.90-1 (2024-05-03) armv7l GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 May 5 11:24 /bin -> usr/bin I: user script /srv/workspace/pbuilder/7085/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: armhf Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), cmake (>= 2.8), libglib2.0-dev (>= 2.51.1), python3-nose dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19444 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on cmake (>= 2.8); however: Package cmake is not installed. pbuilder-satisfydepends-dummy depends on libglib2.0-dev (>= 2.51.1); however: Package libglib2.0-dev is not installed. pbuilder-satisfydepends-dummy depends on python3-nose; however: Package python3-nose is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} cmake{a} cmake-data{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libarchive13t64{a} libblkid-dev{a} libbrotli1{a} libcom-err2{a} libcurl4t64{a} libdebhelper-perl{a} libelf1t64{a} libexpat1{a} libffi-dev{a} libfile-stripnondeterminism-perl{a} libglib2.0-0t64{a} libglib2.0-bin{a} libglib2.0-data{a} libglib2.0-dev{a} libglib2.0-dev-bin{a} libgssapi-krb5-2{a} libicu72{a} libjsoncpp25{a} libk5crypto3{a} libkeyutils1{a} libkrb5-3{a} libkrb5support0{a} libmagic-mgc{a} libmagic1t64{a} libmount-dev{a} libnghttp2-14{a} libpcre2-16-0{a} libpcre2-32-0{a} libpcre2-dev{a} libpcre2-posix3{a} libpipeline1{a} libpkgconf3{a} libproc2-0{a} libpsl5t64{a} libpython3-stdlib{a} libpython3.11-minimal{a} libpython3.11-stdlib{a} libreadline8t64{a} librhash0{a} librtmp1{a} libselinux1-dev{a} libsepol-dev{a} libssh2-1t64{a} libsub-override-perl{a} libtool{a} libuchardet0{a} libuv1t64{a} libxml2{a} m4{a} man-db{a} media-types{a} netbase{a} pkgconf{a} pkgconf-bin{a} po-debconf{a} procps{a} python3{a} python3-minimal{a} python3-nose{a} python3-packaging{a} python3-pkg-resources{a} python3-zombie-imp{a} python3.11{a} python3.11-minimal{a} readline-common{a} sensible-utils{a} tzdata{a} uuid-dev{a} zlib1g-dev{a} The following packages are RECOMMENDED but will NOT be installed: ca-certificates curl krb5-locales libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx psmisc publicsuffix shared-mime-info wget xdg-user-dirs 0 packages upgraded, 86 newly installed, 0 to remove and 0 not upgraded. Need to get 41.9 MB of archives. After unpacking 161 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main armhf libpython3.11-minimal armhf 3.11.9-1 [805 kB] Get: 2 http://deb.debian.org/debian trixie/main armhf libexpat1 armhf 2.6.2-1 [83.5 kB] Get: 3 http://deb.debian.org/debian trixie/main armhf python3.11-minimal armhf 3.11.9-1 [1600 kB] Get: 4 http://deb.debian.org/debian trixie/main armhf python3-minimal armhf 3.11.8-1 [26.3 kB] Get: 5 http://deb.debian.org/debian trixie/main armhf media-types all 10.1.0 [26.9 kB] Get: 6 http://deb.debian.org/debian trixie/main armhf netbase all 6.4 [12.8 kB] Get: 7 http://deb.debian.org/debian trixie/main armhf tzdata all 2024a-3 [255 kB] Get: 8 http://deb.debian.org/debian trixie/main armhf readline-common all 8.2-4 [69.3 kB] Get: 9 http://deb.debian.org/debian trixie/main armhf libreadline8t64 armhf 8.2-4 [145 kB] Get: 10 http://deb.debian.org/debian trixie/main armhf libpython3.11-stdlib armhf 3.11.9-1 [1704 kB] Get: 11 http://deb.debian.org/debian trixie/main armhf python3.11 armhf 3.11.9-1 [602 kB] Get: 12 http://deb.debian.org/debian trixie/main armhf libpython3-stdlib armhf 3.11.8-1 [9332 B] Get: 13 http://deb.debian.org/debian trixie/main armhf python3 armhf 3.11.8-1 [27.4 kB] Get: 14 http://deb.debian.org/debian trixie/main armhf libproc2-0 armhf 2:4.0.4-4 [55.7 kB] Get: 15 http://deb.debian.org/debian trixie/main armhf procps armhf 2:4.0.4-4 [864 kB] Get: 16 http://deb.debian.org/debian trixie/main armhf sensible-utils all 0.0.22 [22.4 kB] Get: 17 http://deb.debian.org/debian trixie/main armhf libmagic-mgc armhf 1:5.45-3 [314 kB] Get: 18 http://deb.debian.org/debian trixie/main armhf libmagic1t64 armhf 1:5.45-3 [98.1 kB] Get: 19 http://deb.debian.org/debian trixie/main armhf file armhf 1:5.45-3 [42.0 kB] Get: 20 http://deb.debian.org/debian trixie/main armhf gettext-base armhf 0.21-14+b1 [157 kB] Get: 21 http://deb.debian.org/debian trixie/main armhf libuchardet0 armhf 0.0.8-1+b1 [65.7 kB] Get: 22 http://deb.debian.org/debian trixie/main armhf groff-base armhf 1.23.0-4 [1090 kB] Get: 23 http://deb.debian.org/debian trixie/main armhf bsdextrautils armhf 2.40-8 [85.6 kB] Get: 24 http://deb.debian.org/debian trixie/main armhf libpipeline1 armhf 1.5.7-2 [33.3 kB] Get: 25 http://deb.debian.org/debian trixie/main armhf man-db armhf 2.12.1-1 [1375 kB] Get: 26 http://deb.debian.org/debian trixie/main armhf m4 armhf 1.4.19-4 [264 kB] Get: 27 http://deb.debian.org/debian trixie/main armhf autoconf all 2.71-3 [332 kB] Get: 28 http://deb.debian.org/debian trixie/main armhf autotools-dev all 20220109.1 [51.6 kB] Get: 29 http://deb.debian.org/debian trixie/main armhf automake all 1:1.16.5-1.3 [823 kB] Get: 30 http://deb.debian.org/debian trixie/main armhf autopoint all 0.21-14 [496 kB] Get: 31 http://deb.debian.org/debian trixie/main armhf libicu72 armhf 72.1-4+b1 [9070 kB] Get: 32 http://deb.debian.org/debian trixie/main armhf libxml2 armhf 2.9.14+dfsg-1.3+b3 [598 kB] Get: 33 http://deb.debian.org/debian trixie/main armhf libarchive13t64 armhf 3.7.2-2 [304 kB] Get: 34 http://deb.debian.org/debian trixie/main armhf libbrotli1 armhf 1.1.0-2+b3 [284 kB] Get: 35 http://deb.debian.org/debian trixie/main armhf libkrb5support0 armhf 1.20.1-6+b1 [30.6 kB] Get: 36 http://deb.debian.org/debian trixie/main armhf libcom-err2 armhf 1.47.1~rc2-1 [21.8 kB] Get: 37 http://deb.debian.org/debian trixie/main armhf libk5crypto3 armhf 1.20.1-6+b1 [75.5 kB] Get: 38 http://deb.debian.org/debian trixie/main armhf libkeyutils1 armhf 1.6.3-3 [7908 B] Get: 39 http://deb.debian.org/debian trixie/main armhf libkrb5-3 armhf 1.20.1-6+b1 [290 kB] Get: 40 http://deb.debian.org/debian trixie/main armhf libgssapi-krb5-2 armhf 1.20.1-6+b1 [112 kB] Get: 41 http://deb.debian.org/debian trixie/main armhf libnghttp2-14 armhf 1.61.0-1+b1 [64.1 kB] Get: 42 http://deb.debian.org/debian trixie/main armhf libpsl5t64 armhf 0.21.2-1.1 [55.6 kB] Get: 43 http://deb.debian.org/debian trixie/main armhf librtmp1 armhf 2.4+20151223.gitfa8646d.1-2+b4 [53.2 kB] Get: 44 http://deb.debian.org/debian trixie/main armhf libssh2-1t64 armhf 1.11.0-4.1+b2 [198 kB] Get: 45 http://deb.debian.org/debian trixie/main armhf libcurl4t64 armhf 8.7.1-3 [391 kB] Get: 46 http://deb.debian.org/debian trixie/main armhf libjsoncpp25 armhf 1.9.5-6+b2 [69.9 kB] Get: 47 http://deb.debian.org/debian trixie/main armhf librhash0 armhf 1.4.3-3+b1 [143 kB] Get: 48 http://deb.debian.org/debian trixie/main armhf libuv1t64 armhf 1.48.0-1.1 [134 kB] Get: 49 http://deb.debian.org/debian trixie/main armhf cmake-data all 3.29.2-2 [2167 kB] Get: 50 http://deb.debian.org/debian trixie/main armhf cmake armhf 3.29.2-2 [5215 kB] Get: 51 http://deb.debian.org/debian trixie/main armhf libdebhelper-perl all 13.15.3 [88.0 kB] Get: 52 http://deb.debian.org/debian trixie/main armhf libtool all 2.4.7-7 [517 kB] Get: 53 http://deb.debian.org/debian trixie/main armhf dh-autoreconf all 20 [17.1 kB] Get: 54 http://deb.debian.org/debian trixie/main armhf libarchive-zip-perl all 1.68-1 [104 kB] Get: 55 http://deb.debian.org/debian trixie/main armhf libsub-override-perl all 0.10-1 [10.6 kB] Get: 56 http://deb.debian.org/debian trixie/main armhf libfile-stripnondeterminism-perl all 1.13.1-1 [19.4 kB] Get: 57 http://deb.debian.org/debian trixie/main armhf dh-strip-nondeterminism all 1.13.1-1 [8620 B] Get: 58 http://deb.debian.org/debian trixie/main armhf libelf1t64 armhf 0.191-1+b1 [183 kB] Get: 59 http://deb.debian.org/debian trixie/main armhf dwz armhf 0.15-1+b2 [106 kB] Get: 60 http://deb.debian.org/debian trixie/main armhf gettext armhf 0.21-14+b1 [1230 kB] Get: 61 http://deb.debian.org/debian trixie/main armhf intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 62 http://deb.debian.org/debian trixie/main armhf po-debconf all 1.0.21+nmu1 [248 kB] Get: 63 http://deb.debian.org/debian trixie/main armhf debhelper all 13.15.3 [901 kB] Get: 64 http://deb.debian.org/debian trixie/main armhf uuid-dev armhf 2.40-8 [42.5 kB] Get: 65 http://deb.debian.org/debian trixie/main armhf libblkid-dev armhf 2.40-8 [190 kB] Get: 66 http://deb.debian.org/debian trixie/main armhf libffi-dev armhf 3.4.6-1 [55.9 kB] Get: 67 http://deb.debian.org/debian trixie/main armhf libglib2.0-0t64 armhf 2.78.4-7 [1285 kB] Get: 68 http://deb.debian.org/debian trixie/main armhf libglib2.0-data all 2.78.4-7 [1225 kB] Get: 69 http://deb.debian.org/debian trixie/main armhf libglib2.0-bin armhf 2.78.4-7 [110 kB] Get: 70 http://deb.debian.org/debian trixie/main armhf python3-packaging all 24.0-1 [45.5 kB] Get: 71 http://deb.debian.org/debian trixie/main armhf libglib2.0-dev-bin armhf 2.78.4-7 [155 kB] Get: 72 http://deb.debian.org/debian trixie/main armhf libsepol-dev armhf 3.5-2+b1 [320 kB] Get: 73 http://deb.debian.org/debian trixie/main armhf libpcre2-16-0 armhf 10.42-4+b1 [212 kB] Get: 74 http://deb.debian.org/debian trixie/main armhf libpcre2-32-0 armhf 10.42-4+b1 [203 kB] Get: 75 http://deb.debian.org/debian trixie/main armhf libpcre2-posix3 armhf 10.42-4+b1 [55.3 kB] Get: 76 http://deb.debian.org/debian trixie/main armhf libpcre2-dev armhf 10.42-4+b1 [668 kB] Get: 77 http://deb.debian.org/debian trixie/main armhf libselinux1-dev armhf 3.5-2+b2 [152 kB] Get: 78 http://deb.debian.org/debian trixie/main armhf libmount-dev armhf 2.40-8 [25.9 kB] Get: 79 http://deb.debian.org/debian trixie/main armhf libpkgconf3 armhf 1.8.1-1+b2 [31.9 kB] Get: 80 http://deb.debian.org/debian trixie/main armhf pkgconf-bin armhf 1.8.1-1+b2 [28.9 kB] Get: 81 http://deb.debian.org/debian trixie/main armhf pkgconf armhf 1.8.1-1+b2 [26.2 kB] Get: 82 http://deb.debian.org/debian trixie/main armhf zlib1g-dev armhf 1:1.3.dfsg-3.1 [904 kB] Get: 83 http://deb.debian.org/debian trixie/main armhf libglib2.0-dev armhf 2.78.4-7 [1529 kB] Get: 84 http://deb.debian.org/debian trixie/main armhf python3-pkg-resources all 68.1.2-2 [241 kB] Get: 85 http://deb.debian.org/debian trixie/main armhf python3-zombie-imp all 0.0.2-2 [11.7 kB] Get: 86 http://deb.debian.org/debian trixie/main armhf python3-nose all 1.3.7-12 [130 kB] Fetched 41.9 MB in 4s (11.7 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package libpython3.11-minimal:armhf. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19444 files and directories currently installed.) Preparing to unpack .../libpython3.11-minimal_3.11.9-1_armhf.deb ... Unpacking libpython3.11-minimal:armhf (3.11.9-1) ... Selecting previously unselected package libexpat1:armhf. Preparing to unpack .../libexpat1_2.6.2-1_armhf.deb ... Unpacking libexpat1:armhf (2.6.2-1) ... Selecting previously unselected package python3.11-minimal. Preparing to unpack .../python3.11-minimal_3.11.9-1_armhf.deb ... Unpacking python3.11-minimal (3.11.9-1) ... Setting up libpython3.11-minimal:armhf (3.11.9-1) ... Setting up libexpat1:armhf (2.6.2-1) ... Setting up python3.11-minimal (3.11.9-1) ... Selecting previously unselected package python3-minimal. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19760 files and directories currently installed.) Preparing to unpack .../0-python3-minimal_3.11.8-1_armhf.deb ... Unpacking python3-minimal (3.11.8-1) ... Selecting previously unselected package media-types. Preparing to unpack .../1-media-types_10.1.0_all.deb ... Unpacking media-types (10.1.0) ... Selecting previously unselected package netbase. Preparing to unpack .../2-netbase_6.4_all.deb ... Unpacking netbase (6.4) ... Selecting previously unselected package tzdata. Preparing to unpack .../3-tzdata_2024a-3_all.deb ... Unpacking tzdata (2024a-3) ... Selecting previously unselected package readline-common. Preparing to unpack .../4-readline-common_8.2-4_all.deb ... Unpacking readline-common (8.2-4) ... Selecting previously unselected package libreadline8t64:armhf. Preparing to unpack .../5-libreadline8t64_8.2-4_armhf.deb ... Adding 'diversion of /lib/arm-linux-gnueabihf/libhistory.so.8 to /lib/arm-linux-gnueabihf/libhistory.so.8.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/arm-linux-gnueabihf/libhistory.so.8.2 to /lib/arm-linux-gnueabihf/libhistory.so.8.2.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/arm-linux-gnueabihf/libreadline.so.8 to /lib/arm-linux-gnueabihf/libreadline.so.8.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/arm-linux-gnueabihf/libreadline.so.8.2 to /lib/arm-linux-gnueabihf/libreadline.so.8.2.usr-is-merged by libreadline8t64' Unpacking libreadline8t64:armhf (8.2-4) ... Selecting previously unselected package libpython3.11-stdlib:armhf. Preparing to unpack .../6-libpython3.11-stdlib_3.11.9-1_armhf.deb ... Unpacking libpython3.11-stdlib:armhf (3.11.9-1) ... Selecting previously unselected package python3.11. Preparing to unpack .../7-python3.11_3.11.9-1_armhf.deb ... Unpacking python3.11 (3.11.9-1) ... Selecting previously unselected package libpython3-stdlib:armhf. Preparing to unpack .../8-libpython3-stdlib_3.11.8-1_armhf.deb ... Unpacking libpython3-stdlib:armhf (3.11.8-1) ... Setting up python3-minimal (3.11.8-1) ... Selecting previously unselected package python3. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20752 files and directories currently installed.) Preparing to unpack .../00-python3_3.11.8-1_armhf.deb ... Unpacking python3 (3.11.8-1) ... Selecting previously unselected package libproc2-0:armhf. Preparing to unpack .../01-libproc2-0_2%3a4.0.4-4_armhf.deb ... Unpacking libproc2-0:armhf (2:4.0.4-4) ... Selecting previously unselected package procps. Preparing to unpack .../02-procps_2%3a4.0.4-4_armhf.deb ... Unpacking procps (2:4.0.4-4) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../03-sensible-utils_0.0.22_all.deb ... Unpacking sensible-utils (0.0.22) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../04-libmagic-mgc_1%3a5.45-3_armhf.deb ... Unpacking libmagic-mgc (1:5.45-3) ... Selecting previously unselected package libmagic1t64:armhf. Preparing to unpack .../05-libmagic1t64_1%3a5.45-3_armhf.deb ... Unpacking libmagic1t64:armhf (1:5.45-3) ... Selecting previously unselected package file. Preparing to unpack .../06-file_1%3a5.45-3_armhf.deb ... Unpacking file (1:5.45-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../07-gettext-base_0.21-14+b1_armhf.deb ... Unpacking gettext-base (0.21-14+b1) ... Selecting previously unselected package libuchardet0:armhf. Preparing to unpack .../08-libuchardet0_0.0.8-1+b1_armhf.deb ... Unpacking libuchardet0:armhf (0.0.8-1+b1) ... Selecting previously unselected package groff-base. Preparing to unpack .../09-groff-base_1.23.0-4_armhf.deb ... Unpacking groff-base (1.23.0-4) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../10-bsdextrautils_2.40-8_armhf.deb ... Unpacking bsdextrautils (2.40-8) ... Selecting previously unselected package libpipeline1:armhf. Preparing to unpack .../11-libpipeline1_1.5.7-2_armhf.deb ... Unpacking libpipeline1:armhf (1.5.7-2) ... Selecting previously unselected package man-db. Preparing to unpack .../12-man-db_2.12.1-1_armhf.deb ... Unpacking man-db (2.12.1-1) ... Selecting previously unselected package m4. Preparing to unpack .../13-m4_1.4.19-4_armhf.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../14-autoconf_2.71-3_all.deb ... Unpacking autoconf (2.71-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../15-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../16-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../17-autopoint_0.21-14_all.deb ... Unpacking autopoint (0.21-14) ... Selecting previously unselected package libicu72:armhf. Preparing to unpack .../18-libicu72_72.1-4+b1_armhf.deb ... Unpacking libicu72:armhf (72.1-4+b1) ... Selecting previously unselected package libxml2:armhf. Preparing to unpack .../19-libxml2_2.9.14+dfsg-1.3+b3_armhf.deb ... Unpacking libxml2:armhf (2.9.14+dfsg-1.3+b3) ... Selecting previously unselected package libarchive13t64:armhf. Preparing to unpack .../20-libarchive13t64_3.7.2-2_armhf.deb ... Unpacking libarchive13t64:armhf (3.7.2-2) ... Selecting previously unselected package libbrotli1:armhf. Preparing to unpack .../21-libbrotli1_1.1.0-2+b3_armhf.deb ... Unpacking libbrotli1:armhf (1.1.0-2+b3) ... Selecting previously unselected package libkrb5support0:armhf. Preparing to unpack .../22-libkrb5support0_1.20.1-6+b1_armhf.deb ... Unpacking libkrb5support0:armhf (1.20.1-6+b1) ... Selecting previously unselected package libcom-err2:armhf. Preparing to unpack .../23-libcom-err2_1.47.1~rc2-1_armhf.deb ... Unpacking libcom-err2:armhf (1.47.1~rc2-1) ... Selecting previously unselected package libk5crypto3:armhf. Preparing to unpack .../24-libk5crypto3_1.20.1-6+b1_armhf.deb ... Unpacking libk5crypto3:armhf (1.20.1-6+b1) ... Selecting previously unselected package libkeyutils1:armhf. Preparing to unpack .../25-libkeyutils1_1.6.3-3_armhf.deb ... Unpacking libkeyutils1:armhf (1.6.3-3) ... Selecting previously unselected package libkrb5-3:armhf. Preparing to unpack .../26-libkrb5-3_1.20.1-6+b1_armhf.deb ... Unpacking libkrb5-3:armhf (1.20.1-6+b1) ... Selecting previously unselected package libgssapi-krb5-2:armhf. Preparing to unpack .../27-libgssapi-krb5-2_1.20.1-6+b1_armhf.deb ... Unpacking libgssapi-krb5-2:armhf (1.20.1-6+b1) ... Selecting previously unselected package libnghttp2-14:armhf. Preparing to unpack .../28-libnghttp2-14_1.61.0-1+b1_armhf.deb ... Unpacking libnghttp2-14:armhf (1.61.0-1+b1) ... Selecting previously unselected package libpsl5t64:armhf. Preparing to unpack .../29-libpsl5t64_0.21.2-1.1_armhf.deb ... Unpacking libpsl5t64:armhf (0.21.2-1.1) ... Selecting previously unselected package librtmp1:armhf. Preparing to unpack .../30-librtmp1_2.4+20151223.gitfa8646d.1-2+b4_armhf.deb ... Unpacking librtmp1:armhf (2.4+20151223.gitfa8646d.1-2+b4) ... Selecting previously unselected package libssh2-1t64:armhf. Preparing to unpack .../31-libssh2-1t64_1.11.0-4.1+b2_armhf.deb ... Unpacking libssh2-1t64:armhf (1.11.0-4.1+b2) ... Selecting previously unselected package libcurl4t64:armhf. Preparing to unpack .../32-libcurl4t64_8.7.1-3_armhf.deb ... Unpacking libcurl4t64:armhf (8.7.1-3) ... Selecting previously unselected package libjsoncpp25:armhf. Preparing to unpack .../33-libjsoncpp25_1.9.5-6+b2_armhf.deb ... Unpacking libjsoncpp25:armhf (1.9.5-6+b2) ... Selecting previously unselected package librhash0:armhf. Preparing to unpack .../34-librhash0_1.4.3-3+b1_armhf.deb ... Unpacking librhash0:armhf (1.4.3-3+b1) ... Selecting previously unselected package libuv1t64:armhf. Preparing to unpack .../35-libuv1t64_1.48.0-1.1_armhf.deb ... Unpacking libuv1t64:armhf (1.48.0-1.1) ... Selecting previously unselected package cmake-data. Preparing to unpack .../36-cmake-data_3.29.2-2_all.deb ... Unpacking cmake-data (3.29.2-2) ... Selecting previously unselected package cmake. Preparing to unpack .../37-cmake_3.29.2-2_armhf.deb ... Unpacking cmake (3.29.2-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../38-libdebhelper-perl_13.15.3_all.deb ... Unpacking libdebhelper-perl (13.15.3) ... Selecting previously unselected package libtool. Preparing to unpack .../39-libtool_2.4.7-7_all.deb ... Unpacking libtool (2.4.7-7) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../40-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../41-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libsub-override-perl. Preparing to unpack .../42-libsub-override-perl_0.10-1_all.deb ... Unpacking libsub-override-perl (0.10-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../43-libfile-stripnondeterminism-perl_1.13.1-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.13.1-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../44-dh-strip-nondeterminism_1.13.1-1_all.deb ... Unpacking dh-strip-nondeterminism (1.13.1-1) ... Selecting previously unselected package libelf1t64:armhf. Preparing to unpack .../45-libelf1t64_0.191-1+b1_armhf.deb ... Unpacking libelf1t64:armhf (0.191-1+b1) ... Selecting previously unselected package dwz. Preparing to unpack .../46-dwz_0.15-1+b2_armhf.deb ... Unpacking dwz (0.15-1+b2) ... Selecting previously unselected package gettext. Preparing to unpack .../47-gettext_0.21-14+b1_armhf.deb ... Unpacking gettext (0.21-14+b1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../48-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../49-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../50-debhelper_13.15.3_all.deb ... Unpacking debhelper (13.15.3) ... Selecting previously unselected package uuid-dev:armhf. Preparing to unpack .../51-uuid-dev_2.40-8_armhf.deb ... Unpacking uuid-dev:armhf (2.40-8) ... Selecting previously unselected package libblkid-dev:armhf. Preparing to unpack .../52-libblkid-dev_2.40-8_armhf.deb ... Unpacking libblkid-dev:armhf (2.40-8) ... Selecting previously unselected package libffi-dev:armhf. Preparing to unpack .../53-libffi-dev_3.4.6-1_armhf.deb ... Unpacking libffi-dev:armhf (3.4.6-1) ... Selecting previously unselected package libglib2.0-0t64:armhf. Preparing to unpack .../54-libglib2.0-0t64_2.78.4-7_armhf.deb ... Unpacking libglib2.0-0t64:armhf (2.78.4-7) ... Selecting previously unselected package libglib2.0-data. Preparing to unpack .../55-libglib2.0-data_2.78.4-7_all.deb ... Unpacking libglib2.0-data (2.78.4-7) ... Selecting previously unselected package libglib2.0-bin. Preparing to unpack .../56-libglib2.0-bin_2.78.4-7_armhf.deb ... Unpacking libglib2.0-bin (2.78.4-7) ... Selecting previously unselected package python3-packaging. Preparing to unpack .../57-python3-packaging_24.0-1_all.deb ... Unpacking python3-packaging (24.0-1) ... Selecting previously unselected package libglib2.0-dev-bin. Preparing to unpack .../58-libglib2.0-dev-bin_2.78.4-7_armhf.deb ... Unpacking libglib2.0-dev-bin (2.78.4-7) ... Selecting previously unselected package libsepol-dev:armhf. Preparing to unpack .../59-libsepol-dev_3.5-2+b1_armhf.deb ... Unpacking libsepol-dev:armhf (3.5-2+b1) ... Selecting previously unselected package libpcre2-16-0:armhf. Preparing to unpack .../60-libpcre2-16-0_10.42-4+b1_armhf.deb ... Unpacking libpcre2-16-0:armhf (10.42-4+b1) ... Selecting previously unselected package libpcre2-32-0:armhf. Preparing to unpack .../61-libpcre2-32-0_10.42-4+b1_armhf.deb ... Unpacking libpcre2-32-0:armhf (10.42-4+b1) ... Selecting previously unselected package libpcre2-posix3:armhf. Preparing to unpack .../62-libpcre2-posix3_10.42-4+b1_armhf.deb ... Unpacking libpcre2-posix3:armhf (10.42-4+b1) ... Selecting previously unselected package libpcre2-dev:armhf. Preparing to unpack .../63-libpcre2-dev_10.42-4+b1_armhf.deb ... Unpacking libpcre2-dev:armhf (10.42-4+b1) ... Selecting previously unselected package libselinux1-dev:armhf. Preparing to unpack .../64-libselinux1-dev_3.5-2+b2_armhf.deb ... Unpacking libselinux1-dev:armhf (3.5-2+b2) ... Selecting previously unselected package libmount-dev:armhf. Preparing to unpack .../65-libmount-dev_2.40-8_armhf.deb ... Unpacking libmount-dev:armhf (2.40-8) ... Selecting previously unselected package libpkgconf3:armhf. Preparing to unpack .../66-libpkgconf3_1.8.1-1+b2_armhf.deb ... Unpacking libpkgconf3:armhf (1.8.1-1+b2) ... Selecting previously unselected package pkgconf-bin. Preparing to unpack .../67-pkgconf-bin_1.8.1-1+b2_armhf.deb ... Unpacking pkgconf-bin (1.8.1-1+b2) ... Selecting previously unselected package pkgconf:armhf. Preparing to unpack .../68-pkgconf_1.8.1-1+b2_armhf.deb ... Unpacking pkgconf:armhf (1.8.1-1+b2) ... Selecting previously unselected package zlib1g-dev:armhf. Preparing to unpack .../69-zlib1g-dev_1%3a1.3.dfsg-3.1_armhf.deb ... Unpacking zlib1g-dev:armhf (1:1.3.dfsg-3.1) ... Selecting previously unselected package libglib2.0-dev:armhf. Preparing to unpack .../70-libglib2.0-dev_2.78.4-7_armhf.deb ... Unpacking libglib2.0-dev:armhf (2.78.4-7) ... Selecting previously unselected package python3-pkg-resources. Preparing to unpack .../71-python3-pkg-resources_68.1.2-2_all.deb ... Unpacking python3-pkg-resources (68.1.2-2) ... Selecting previously unselected package python3-zombie-imp. Preparing to unpack .../72-python3-zombie-imp_0.0.2-2_all.deb ... Unpacking python3-zombie-imp (0.0.2-2) ... Selecting previously unselected package python3-nose. Preparing to unpack .../73-python3-nose_1.3.7-12_all.deb ... Unpacking python3-nose (1.3.7-12) ... Setting up media-types (10.1.0) ... Setting up libpipeline1:armhf (1.5.7-2) ... Setting up libkeyutils1:armhf (1.6.3-3) ... Setting up libicu72:armhf (72.1-4+b1) ... Setting up bsdextrautils (2.40-8) ... Setting up libmagic-mgc (1:5.45-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.15.3) ... Setting up libbrotli1:armhf (1.1.0-2+b3) ... Setting up libuv1t64:armhf (1.48.0-1.1) ... Setting up libmagic1t64:armhf (1:5.45-3) ... Setting up libpsl5t64:armhf (0.21.2-1.1) ... Setting up libnghttp2-14:armhf (1.61.0-1+b1) ... Setting up gettext-base (0.21-14+b1) ... Setting up m4 (1.4.19-4) ... Setting up libcom-err2:armhf (1.47.1~rc2-1) ... Setting up file (1:5.45-3) ... Setting up libffi-dev:armhf (3.4.6-1) ... Setting up libpcre2-16-0:armhf (10.42-4+b1) ... Setting up libelf1t64:armhf (0.191-1+b1) ... Setting up libkrb5support0:armhf (1.20.1-6+b1) ... Setting up tzdata (2024a-3) ... Current default time zone: 'Etc/UTC' Local time is now: Tue May 7 10:16:50 UTC 2024. Universal Time is now: Tue May 7 10:16:50 UTC 2024. Run 'dpkg-reconfigure tzdata' if you wish to change it. Setting up autotools-dev (20220109.1) ... Setting up libpcre2-32-0:armhf (10.42-4+b1) ... Setting up libglib2.0-0t64:armhf (2.78.4-7) ... No schema files found: doing nothing. Setting up libglib2.0-data (2.78.4-7) ... Setting up libpkgconf3:armhf (1.8.1-1+b2) ... Setting up librtmp1:armhf (2.4+20151223.gitfa8646d.1-2+b4) ... Setting up uuid-dev:armhf (2.40-8) ... Setting up libproc2-0:armhf (2:4.0.4-4) ... Setting up autopoint (0.21-14) ... Setting up libjsoncpp25:armhf (1.9.5-6+b2) ... Setting up libsepol-dev:armhf (3.5-2+b1) ... Setting up pkgconf-bin (1.8.1-1+b2) ... Setting up libk5crypto3:armhf (1.20.1-6+b1) ... Setting up autoconf (2.71-3) ... Setting up zlib1g-dev:armhf (1:1.3.dfsg-3.1) ... Setting up libpcre2-posix3:armhf (10.42-4+b1) ... Setting up dwz (0.15-1+b2) ... Setting up sensible-utils (0.0.22) ... Setting up librhash0:armhf (1.4.3-3+b1) ... Setting up libuchardet0:armhf (0.0.8-1+b1) ... Setting up procps (2:4.0.4-4) ... Setting up libsub-override-perl (0.10-1) ... Setting up netbase (6.4) ... Setting up cmake-data (3.29.2-2) ... Setting up libkrb5-3:armhf (1.20.1-6+b1) ... Setting up libssh2-1t64:armhf (1.11.0-4.1+b2) ... Setting up readline-common (8.2-4) ... Setting up libxml2:armhf (2.9.14+dfsg-1.3+b3) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.13.1-1) ... Setting up libblkid-dev:armhf (2.40-8) ... Setting up gettext (0.21-14+b1) ... Setting up libpcre2-dev:armhf (10.42-4+b1) ... Setting up libtool (2.4.7-7) ... Setting up libselinux1-dev:armhf (3.5-2+b2) ... Setting up libglib2.0-bin (2.78.4-7) ... Setting up pkgconf:armhf (1.8.1-1+b2) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up libgssapi-krb5-2:armhf (1.20.1-6+b1) ... Setting up libreadline8t64:armhf (8.2-4) ... Setting up dh-strip-nondeterminism (1.13.1-1) ... Setting up groff-base (1.23.0-4) ... Setting up libarchive13t64:armhf (3.7.2-2) ... Setting up libmount-dev:armhf (2.40-8) ... Setting up libcurl4t64:armhf (8.7.1-3) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up libpython3.11-stdlib:armhf (3.11.9-1) ... Setting up man-db (2.12.1-1) ... Not building database; man-db/auto-update is not 'true'. Setting up cmake (3.29.2-2) ... Setting up libpython3-stdlib:armhf (3.11.8-1) ... Setting up python3.11 (3.11.9-1) ... Setting up debhelper (13.15.3) ... Setting up python3 (3.11.8-1) ... Setting up python3-packaging (24.0-1) ... Setting up python3-pkg-resources (68.1.2-2) ... Setting up libglib2.0-dev-bin (2.78.4-7) ... Setting up python3-zombie-imp (0.0.2-2) ... Setting up python3-nose (1.3.7-12) ... Setting up libglib2.0-dev:armhf (2.78.4-7) ... Processing triggers for libc-bin (2.38-7) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/reproducible-path/user-session-migration-0.4.2/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../user-session-migration_0.4.2_source.changes dpkg-buildpackage: info: source package user-session-migration dpkg-buildpackage: info: source version 0.4.2 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Mike Gabriel dpkg-source --before-build . dpkg-buildpackage: info: host architecture armhf debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure cd obj-arm-linux-gnueabihf && DEB_PYTHON_INSTALL_LAYOUT=deb cmake -DCMAKE_INSTALL_PREFIX=/usr -DCMAKE_BUILD_TYPE=None -DCMAKE_INSTALL_SYSCONFDIR=/etc -DCMAKE_INSTALL_LOCALSTATEDIR=/var -DCMAKE_EXPORT_NO_PACKAGE_REGISTRY=ON -DCMAKE_FIND_USE_PACKAGE_REGISTRY=OFF -DCMAKE_FIND_PACKAGE_NO_PACKAGE_REGISTRY=ON -DFETCHCONTENT_FULLY_DISCONNECTED=ON -DCMAKE_INSTALL_RUNSTATEDIR=/run -DCMAKE_SKIP_INSTALL_ALL_DEPENDENCY=ON "-GUnix Makefiles" -DCMAKE_VERBOSE_MAKEFILE=ON -DCMAKE_INSTALL_LIBDIR=lib/arm-linux-gnueabihf .. -- The C compiler identification is GNU 13.2.0 -- Detecting C compiler ABI info -- Detecting C compiler ABI info - done -- Check for working C compiler: /usr/bin/cc - skipped -- Detecting C compile features -- Detecting C compile features - done -- Found PkgConfig: /usr/bin/pkg-config (found version "1.8.1") -- Checking for modules 'glib-2.0>=2.51.1;gio-2.0' -- Found glib-2.0, version 2.78.4 -- Found gio-2.0, version 2.78.4 -- Configuring done (2.6s) -- Generating done (0.0s) CMake Warning: Manually-specified variables were not used by the project: CMAKE_EXPORT_NO_PACKAGE_REGISTRY CMAKE_FIND_PACKAGE_NO_PACKAGE_REGISTRY CMAKE_INSTALL_LIBDIR CMAKE_INSTALL_LOCALSTATEDIR CMAKE_INSTALL_RUNSTATEDIR CMAKE_INSTALL_SYSCONFDIR FETCHCONTENT_FULLY_DISCONNECTED -- Build files have been written to: /build/reproducible-path/user-session-migration-0.4.2/obj-arm-linux-gnueabihf dh_auto_build cd obj-arm-linux-gnueabihf && make -j3 "INSTALL=install --strip-program=true" VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/user-session-migration-0.4.2/obj-arm-linux-gnueabihf' /usr/bin/cmake -S/build/reproducible-path/user-session-migration-0.4.2 -B/build/reproducible-path/user-session-migration-0.4.2/obj-arm-linux-gnueabihf --check-build-system CMakeFiles/Makefile.cmake 0 /usr/bin/cmake -E cmake_progress_start /build/reproducible-path/user-session-migration-0.4.2/obj-arm-linux-gnueabihf/CMakeFiles /build/reproducible-path/user-session-migration-0.4.2/obj-arm-linux-gnueabihf//CMakeFiles/progress.marks make -f CMakeFiles/Makefile2 all make[2]: Entering directory '/build/reproducible-path/user-session-migration-0.4.2/obj-arm-linux-gnueabihf' make -f CMakeFiles/doc-rawman.dir/build.make CMakeFiles/doc-rawman.dir/depend make -f src/CMakeFiles/user-session-migration.dir/build.make src/CMakeFiles/user-session-migration.dir/depend make[3]: Entering directory '/build/reproducible-path/user-session-migration-0.4.2/obj-arm-linux-gnueabihf' cd /build/reproducible-path/user-session-migration-0.4.2/obj-arm-linux-gnueabihf && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /build/reproducible-path/user-session-migration-0.4.2 /build/reproducible-path/user-session-migration-0.4.2 /build/reproducible-path/user-session-migration-0.4.2/obj-arm-linux-gnueabihf /build/reproducible-path/user-session-migration-0.4.2/obj-arm-linux-gnueabihf /build/reproducible-path/user-session-migration-0.4.2/obj-arm-linux-gnueabihf/CMakeFiles/doc-rawman.dir/DependInfo.cmake "--color=" make[3]: Entering directory '/build/reproducible-path/user-session-migration-0.4.2/obj-arm-linux-gnueabihf' cd /build/reproducible-path/user-session-migration-0.4.2/obj-arm-linux-gnueabihf && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /build/reproducible-path/user-session-migration-0.4.2 /build/reproducible-path/user-session-migration-0.4.2/src /build/reproducible-path/user-session-migration-0.4.2/obj-arm-linux-gnueabihf /build/reproducible-path/user-session-migration-0.4.2/obj-arm-linux-gnueabihf/src /build/reproducible-path/user-session-migration-0.4.2/obj-arm-linux-gnueabihf/src/CMakeFiles/user-session-migration.dir/DependInfo.cmake "--color=" make[3]: Leaving directory '/build/reproducible-path/user-session-migration-0.4.2/obj-arm-linux-gnueabihf' make -f src/CMakeFiles/user-session-migration.dir/build.make src/CMakeFiles/user-session-migration.dir/build make[3]: Entering directory '/build/reproducible-path/user-session-migration-0.4.2/obj-arm-linux-gnueabihf' make[3]: Leaving directory '/build/reproducible-path/user-session-migration-0.4.2/obj-arm-linux-gnueabihf' make -f CMakeFiles/doc-rawman.dir/build.make CMakeFiles/doc-rawman.dir/build make[3]: Entering directory '/build/reproducible-path/user-session-migration-0.4.2/obj-arm-linux-gnueabihf' make[3]: Nothing to be done for 'CMakeFiles/doc-rawman.dir/build'. make[3]: Leaving directory '/build/reproducible-path/user-session-migration-0.4.2/obj-arm-linux-gnueabihf' [ 50%] Building C object src/CMakeFiles/user-session-migration.dir/user-session-migration.c.o cd /build/reproducible-path/user-session-migration-0.4.2/obj-arm-linux-gnueabihf/src && /usr/bin/cc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/user-session-migration-0.4.2=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -I/usr/include -pthread -I/usr/include/libmount -I/usr/include/blkid -MD -MT src/CMakeFiles/user-session-migration.dir/user-session-migration.c.o -MF CMakeFiles/user-session-migration.dir/user-session-migration.c.o.d -o CMakeFiles/user-session-migration.dir/user-session-migration.c.o -c /build/reproducible-path/user-session-migration-0.4.2/src/user-session-migration.c [ 50%] Built target doc-rawman /build/reproducible-path/user-session-migration-0.4.2/src/user-session-migration.c: In function 'main': /build/reproducible-path/user-session-migration-0.4.2/src/user-session-migration.c:328:3: warning: 'g_type_init' is deprecated [-Wdeprecated-declarations] 328 | g_type_init(); | ^~~~~~~~~~~ In file included from /usr/include/glib-2.0/gobject/gobject.h:26, from /usr/include/glib-2.0/gobject/gbinding.h:31, from /usr/include/glib-2.0/glib-object.h:24, from /usr/include/glib-2.0/gio/gioenums.h:30, from /usr/include/glib-2.0/gio/giotypes.h:30, from /usr/include/glib-2.0/gio/gio.h:28, from /build/reproducible-path/user-session-migration-0.4.2/src/user-session-migration.c:25: /usr/include/glib-2.0/gobject/gtype.h:735:23: note: declared here 735 | void g_type_init (void); | ^~~~~~~~~~~ [100%] Linking C executable user-session-migration cd /build/reproducible-path/user-session-migration-0.4.2/obj-arm-linux-gnueabihf/src && /usr/bin/cmake -E cmake_link_script CMakeFiles/user-session-migration.dir/link.txt --verbose=1 /usr/bin/cc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/user-session-migration-0.4.2=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -Wl,-z,relro -Wl,-z,now "CMakeFiles/user-session-migration.dir/user-session-migration.c.o" -o user-session-migration -lgio-2.0 -lgobject-2.0 -lglib-2.0 make[3]: Leaving directory '/build/reproducible-path/user-session-migration-0.4.2/obj-arm-linux-gnueabihf' [100%] Built target user-session-migration make[2]: Leaving directory '/build/reproducible-path/user-session-migration-0.4.2/obj-arm-linux-gnueabihf' /usr/bin/cmake -E cmake_progress_start /build/reproducible-path/user-session-migration-0.4.2/obj-arm-linux-gnueabihf/CMakeFiles 0 make[1]: Leaving directory '/build/reproducible-path/user-session-migration-0.4.2/obj-arm-linux-gnueabihf' debian/rules override_dh_auto_test make[1]: Entering directory '/build/reproducible-path/user-session-migration-0.4.2' LC_ALL=C.UTF-8 dh_auto_test cd obj-arm-linux-gnueabihf && make -j3 check ARGS\+=--verbose ARGS\+=-j3 make[2]: Entering directory '/build/reproducible-path/user-session-migration-0.4.2/obj-arm-linux-gnueabihf' /usr/bin/cmake -S/build/reproducible-path/user-session-migration-0.4.2 -B/build/reproducible-path/user-session-migration-0.4.2/obj-arm-linux-gnueabihf --check-build-system CMakeFiles/Makefile.cmake 0 make -f CMakeFiles/Makefile2 check make[3]: Entering directory '/build/reproducible-path/user-session-migration-0.4.2/obj-arm-linux-gnueabihf' /usr/bin/cmake -S/build/reproducible-path/user-session-migration-0.4.2 -B/build/reproducible-path/user-session-migration-0.4.2/obj-arm-linux-gnueabihf --check-build-system CMakeFiles/Makefile.cmake 0 /usr/bin/cmake -E cmake_progress_start /build/reproducible-path/user-session-migration-0.4.2/obj-arm-linux-gnueabihf/CMakeFiles 2 make -f CMakeFiles/Makefile2 CMakeFiles/check.dir/all make[4]: Entering directory '/build/reproducible-path/user-session-migration-0.4.2/obj-arm-linux-gnueabihf' make -f src/CMakeFiles/user-session-migration.dir/build.make src/CMakeFiles/user-session-migration.dir/depend make[5]: Entering directory '/build/reproducible-path/user-session-migration-0.4.2/obj-arm-linux-gnueabihf' cd /build/reproducible-path/user-session-migration-0.4.2/obj-arm-linux-gnueabihf && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /build/reproducible-path/user-session-migration-0.4.2 /build/reproducible-path/user-session-migration-0.4.2/src /build/reproducible-path/user-session-migration-0.4.2/obj-arm-linux-gnueabihf /build/reproducible-path/user-session-migration-0.4.2/obj-arm-linux-gnueabihf/src /build/reproducible-path/user-session-migration-0.4.2/obj-arm-linux-gnueabihf/src/CMakeFiles/user-session-migration.dir/DependInfo.cmake "--color=" make[5]: Leaving directory '/build/reproducible-path/user-session-migration-0.4.2/obj-arm-linux-gnueabihf' make -f src/CMakeFiles/user-session-migration.dir/build.make src/CMakeFiles/user-session-migration.dir/build make[5]: Entering directory '/build/reproducible-path/user-session-migration-0.4.2/obj-arm-linux-gnueabihf' make[5]: Nothing to be done for 'src/CMakeFiles/user-session-migration.dir/build'. make[5]: Leaving directory '/build/reproducible-path/user-session-migration-0.4.2/obj-arm-linux-gnueabihf' [100%] Built target user-session-migration make -f CMakeFiles/check.dir/build.make CMakeFiles/check.dir/depend make[5]: Entering directory '/build/reproducible-path/user-session-migration-0.4.2/obj-arm-linux-gnueabihf' cd /build/reproducible-path/user-session-migration-0.4.2/obj-arm-linux-gnueabihf && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /build/reproducible-path/user-session-migration-0.4.2 /build/reproducible-path/user-session-migration-0.4.2 /build/reproducible-path/user-session-migration-0.4.2/obj-arm-linux-gnueabihf /build/reproducible-path/user-session-migration-0.4.2/obj-arm-linux-gnueabihf /build/reproducible-path/user-session-migration-0.4.2/obj-arm-linux-gnueabihf/CMakeFiles/check.dir/DependInfo.cmake "--color=" make[5]: Leaving directory '/build/reproducible-path/user-session-migration-0.4.2/obj-arm-linux-gnueabihf' make -f CMakeFiles/check.dir/build.make CMakeFiles/check.dir/build make[5]: Entering directory '/build/reproducible-path/user-session-migration-0.4.2/obj-arm-linux-gnueabihf' nosetests3 ......... ---------------------------------------------------------------------- Ran 9 tests in 16.975s OK make[5]: Leaving directory '/build/reproducible-path/user-session-migration-0.4.2/obj-arm-linux-gnueabihf' [100%] Built target check make[4]: Leaving directory '/build/reproducible-path/user-session-migration-0.4.2/obj-arm-linux-gnueabihf' /usr/bin/cmake -E cmake_progress_start /build/reproducible-path/user-session-migration-0.4.2/obj-arm-linux-gnueabihf/CMakeFiles 0 make[3]: Leaving directory '/build/reproducible-path/user-session-migration-0.4.2/obj-arm-linux-gnueabihf' make[2]: Leaving directory '/build/reproducible-path/user-session-migration-0.4.2/obj-arm-linux-gnueabihf' make[1]: Leaving directory '/build/reproducible-path/user-session-migration-0.4.2' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install cd obj-arm-linux-gnueabihf && make -j3 install DESTDIR=/build/reproducible-path/user-session-migration-0.4.2/debian/tmp AM_UPDATE_INFO_DIR=no "INSTALL=install --strip-program=true" make[1]: Entering directory '/build/reproducible-path/user-session-migration-0.4.2/obj-arm-linux-gnueabihf' /usr/bin/cmake -S/build/reproducible-path/user-session-migration-0.4.2 -B/build/reproducible-path/user-session-migration-0.4.2/obj-arm-linux-gnueabihf --check-build-system CMakeFiles/Makefile.cmake 0 make -f CMakeFiles/Makefile2 preinstall make[2]: Entering directory '/build/reproducible-path/user-session-migration-0.4.2/obj-arm-linux-gnueabihf' make[2]: Nothing to be done for 'preinstall'. make[2]: Leaving directory '/build/reproducible-path/user-session-migration-0.4.2/obj-arm-linux-gnueabihf' Install the project... /usr/bin/cmake -P cmake_install.cmake -- Install configuration: "None" -- Installing: /build/reproducible-path/user-session-migration-0.4.2/debian/tmp/usr/share/man/man1/user-session-migration.1 -- Installing: /build/reproducible-path/user-session-migration-0.4.2/debian/tmp/usr/lib/systemd/user/user-session-migration.service -- Installing: /build/reproducible-path/user-session-migration-0.4.2/debian/tmp/usr/bin/user-session-migration make[1]: Leaving directory '/build/reproducible-path/user-session-migration-0.4.2/obj-arm-linux-gnueabihf' dh_install debian/rules execute_after_dh_install make[1]: Entering directory '/build/reproducible-path/user-session-migration-0.4.2' mkdir -p debian/dh-user-session-migration/usr/share/man/man1/ pod2man -c Debhelper -r "0.4.2" debhelper/dh_user-session-migration debian/dh-user-session-migration/usr/share/man/man1/dh_user-session-migration.1 make[1]: Leaving directory '/build/reproducible-path/user-session-migration-0.4.2' dh_installdocs dh_installchangelogs dh_installman dh_installsystemduser dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dh_installdeb dh_gencontrol dpkg-gencontrol: warning: package dh-user-session-migration: substitution variable ${perl:Depends} unused, but is defined dh_md5sums dh_builddeb dpkg-deb: building package 'user-session-migration' in '../user-session-migration_0.4.2_armhf.deb'. dpkg-deb: building package 'user-session-migration-dbgsym' in '../user-session-migration-dbgsym_0.4.2_armhf.deb'. dpkg-deb: building package 'dh-user-session-migration' in '../dh-user-session-migration_0.4.2_all.deb'. dpkg-genbuildinfo --build=binary -O../user-session-migration_0.4.2_armhf.buildinfo dpkg-genchanges --build=binary -O../user-session-migration_0.4.2_armhf.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: including full source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/7085 and its subdirectories I: Current time: Mon May 6 22:17:52 -12 2024 I: pbuilder-time-stamp: 1715077072 Tue May 7 10:17:59 UTC 2024 I: 1st build successful. Starting 2nd build on remote node virt64b-armhf-rb.debian.net. Tue May 7 10:17:59 UTC 2024 I: Preparing to do remote build '2' on virt64b-armhf-rb.debian.net. Tue May 7 10:21:04 UTC 2024 I: Deleting $TMPDIR on virt64b-armhf-rb.debian.net. Tue May 7 10:21:07 UTC 2024 I: user-session-migration_0.4.2_armhf.changes: Format: 1.8 Date: Mon, 25 Mar 2024 12:17:55 +0100 Source: user-session-migration Binary: dh-user-session-migration user-session-migration user-session-migration-dbgsym Architecture: all armhf Version: 0.4.2 Distribution: unstable Urgency: medium Maintainer: Ayatana Packagers Changed-By: Mike Gabriel Description: dh-user-session-migration - debhelper extension for user-session-migration support user-session-migration - Tool to migrate in-session user data Closes: 1061084 1067203 Changes: user-session-migration (0.4.2) unstable; urgency=medium . * CMakeLists.txt: - Modernize CMake, only require C compiler, define upstream version in CMake. * tests/debhelper_tests.py: - Ignore missing env variables DEB_BUILD_OPTIONS and DH_INTERNAL_OPTIONS. * tests/migration_tests.py: - RegExp-escape search strings. Don't fail on tests if build directory contains regexp-special-characters (such as '+') in the path name. (Closes: #1061084). * src/user-session-migration.c: - Fix FTBFS on architectures affected by t64 transition. (Closes: #1067203). * debian/control: + Bump Standards-Version: to 4.6.2. No changes needed. Checksums-Sha1: 8b7fed7c68371a4f1a2e699b2866b1179f6391b5 5464 dh-user-session-migration_0.4.2_all.deb 32a7c2c7bd494fc2c333d0ecee4da020db81ff47 11896 user-session-migration-dbgsym_0.4.2_armhf.deb 1494a1d6b93266211d2e290aec2dcae6a215ea5f 7299 user-session-migration_0.4.2_armhf.buildinfo 42f35691f0243f1fe3ca11b614942102c87b8bc4 8244 user-session-migration_0.4.2_armhf.deb Checksums-Sha256: 5eda08af4d979f947085a5ed36b4737373b747ca6d600f1b8ec7c72fefdfafd3 5464 dh-user-session-migration_0.4.2_all.deb 460cdf13eb0066b03b749a9f5fcfd25654d8695236748ffbe84c0263866cd1a9 11896 user-session-migration-dbgsym_0.4.2_armhf.deb a33f47ceceaa438dcbb36ef0cd8dc221e49a06ee0cfc4eb60500f83923169af1 7299 user-session-migration_0.4.2_armhf.buildinfo 7ed4f09e29897f7e013be2a6664ca0f975872741e6f51404e48bd6df6191c3b2 8244 user-session-migration_0.4.2_armhf.deb Files: bc76dead240d2e810919dc0e75bd8dfa 5464 misc optional dh-user-session-migration_0.4.2_all.deb f4cf104879c50a4571f08ad0d08c7b4f 11896 debug optional user-session-migration-dbgsym_0.4.2_armhf.deb 2ef3dadc1dfac19ae493ef27a85ea6e8 7299 misc optional user-session-migration_0.4.2_armhf.buildinfo cb9108951a1bef97eda67569854f21ff 8244 misc optional user-session-migration_0.4.2_armhf.deb Tue May 7 10:21:08 UTC 2024 I: diffoscope 265 will be used to compare the two builds: Running as unit: rb-diffoscope-armhf_24-4291.service # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.ZqQhQych/user-session-migration_0.4.2.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.ZqQhQych/user-session-migration_0.4.2.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.ZqQhQych/user-session-migration_0.4.2.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.ZqQhQych/b1/user-session-migration_0.4.2_armhf.changes /srv/reproducible-results/rbuild-debian/r-b-build.ZqQhQych/b2/user-session-migration_0.4.2_armhf.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.360s) 0.360s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.017s) 0.017s 12 calls diffoscope.comparators.binary.FilesystemFile ## specialize (total time: 0.000s) 0.000s 1 call specialize Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 691ms CPU time consumed: 692ms Tue May 7 10:21:09 UTC 2024 I: diffoscope 265 found no differences in the changes files, and a .buildinfo file also exists. Tue May 7 10:21:09 UTC 2024 I: user-session-migration from trixie built successfully and reproducibly on armhf. Tue May 7 10:21:10 UTC 2024 I: Submitting .buildinfo files to external archives: Tue May 7 10:21:10 UTC 2024 I: Submitting 8.0K b1/user-session-migration_0.4.2_armhf.buildinfo.asc Tue May 7 10:21:10 UTC 2024 I: Submitting 8.0K b2/user-session-migration_0.4.2_armhf.buildinfo.asc Tue May 7 10:21:11 UTC 2024 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Tue May 7 10:21:11 UTC 2024 I: Done submitting .buildinfo files. Tue May 7 10:21:11 UTC 2024 I: Removing signed user-session-migration_0.4.2_armhf.buildinfo.asc files: removed './b1/user-session-migration_0.4.2_armhf.buildinfo.asc' removed './b2/user-session-migration_0.4.2_armhf.buildinfo.asc'