Wed May 29 12:39:52 UTC 2024 I: starting to build snappy/trixie/armhf on jenkins on '2024-05-29 12:39' Wed May 29 12:39:52 UTC 2024 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/armhf_32/17441/console.log Wed May 29 12:39:52 UTC 2024 I: Downloading source for trixie/snappy=1.2.1-1 --2024-05-29 12:39:52-- http://deb.debian.org/debian/pool/main/s/snappy/snappy_1.2.1-1.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 1842 (1.8K) [text/prs.lines.tag] Saving to: ‘snappy_1.2.1-1.dsc’ 0K . 100% 259M=0s 2024-05-29 12:39:52 (259 MB/s) - ‘snappy_1.2.1-1.dsc’ saved [1842/1842] Wed May 29 12:39:52 UTC 2024 I: snappy_1.2.1-1.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: snappy Binary: libsnappy-dev, libsnappy1v5 Architecture: any Version: 1.2.1-1 Maintainer: Laszlo Boszormenyi (GCS) Homepage: https://google.github.io/snappy/ Standards-Version: 4.7.0 Build-Depends: debhelper-compat (= 13), cmake, pkgconf, libgtest-dev, libgmock-dev, libbenchmark-dev Package-List: libsnappy-dev deb libdevel optional arch=any libsnappy1v5 deb libs optional arch=any Checksums-Sha1: 8271f3a62130ebaa997994a0c5647af8fdc8e46b 1108761 snappy_1.2.1.orig.tar.gz 54305f1084199b2c55af0cfb0c56779c879e07d5 16200 snappy_1.2.1-1.debian.tar.xz Checksums-Sha256: 736aeb64d86566d2236ddffa2865ee5d7a82d26c9016b36218fcc27ea4f09f86 1108761 snappy_1.2.1.orig.tar.gz c558d167ab2b7ce52252db2ccc4b76e398b063706b3512e82e52ecbbfa45e4db 16200 snappy_1.2.1-1.debian.tar.xz Files: dd6f9b667e69491e1dbf7419bdf68823 1108761 snappy_1.2.1.orig.tar.gz 0ba68c2d4fc2f5c4923161036877b7a2 16200 snappy_1.2.1-1.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQIzBAEBCgAdFiEEfYh9yLp7u6e4NeO63OMQ54ZMyL8FAmZOD9cACgkQ3OMQ54ZM yL98Hw//YDA4E5kfcMWr37WH9sd9VgLq7NE1VnKqrNHnyxbQHou3Ev23fO8TCxAw HlArDiHrp4Mz0rPvH8ViSpv/oUangFN9XuUkmvz8ar6x8ZbSa3gBkWXtwe+EA2Md ImwFueh0x4kHnd36HOhHknAaSaQvgPerGcziYB8pg6Dr9cvH/TNKzOPnz6yrj1W5 d/6CDuOiHQbOauBJDCZ/MgafTHJgJIOtuhyXaL8fIeGQSLWmtDAhFp70/RPegaLv Rqv3hzGQyKbyrYrdBKRiJjJRrscPRDj/e0wsaT8JyLzhWgoL6F7n1Ly27RdJt6oy yXXWVVLdFrfPVGz/QVTWg79cHMhm9/RJG6m9yiBCd2L0pHXRPOgf7uWRoFaRuy/u 7lvGxQrZccA+m8LInaRUGRqYxj8isFS4mLA1+Rx/pslqAjwvdV6uRJXDpjPuuAgk 4+mYA3zhyT+CQN2Vq2rH98gQk9T8C6BP+0GwNsyUwc06ocwsps+foclnX4lsbSqU R2ZZdbkd1dqvzRsAh9Ne39dNO3w6/uiLJQMhTKLy+Ep6UVYqUg1mzpsC1Y23SqVQ j09ZI6qfC2+bGo6oHiNGlXIibmeDWshUcJkrr3zizhaC7zXnyid+93hxO2UiTHHY C2sSvTsM6cpMPJSFdw1fqecebyInGllLEVR66uLP2t2MVYCFLV8= =in5w -----END PGP SIGNATURE----- Wed May 29 12:39:52 UTC 2024 I: Checking whether the package is not for us Wed May 29 12:39:52 UTC 2024 I: Starting 1st build on remote node virt64c-armhf-rb.debian.net. Wed May 29 12:39:52 UTC 2024 I: Preparing to do remote build '1' on virt64c-armhf-rb.debian.net. Wed May 29 12:43:44 UTC 2024 I: Deleting $TMPDIR on virt64c-armhf-rb.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Wed May 29 00:39:58 -12 2024 I: pbuilder-time-stamp: 1716986398 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [snappy_1.2.1-1.dsc] I: copying [./snappy_1.2.1.orig.tar.gz] I: copying [./snappy_1.2.1-1.debian.tar.xz] I: Extracting source gpgv: Signature made Wed May 22 15:31:35 2024 gpgv: using RSA key 7D887DC8BA7BBBA7B835E3BADCE310E7864CC8BF gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./snappy_1.2.1-1.dsc: no acceptable signature found dpkg-source: info: extracting snappy in snappy-1.2.1 dpkg-source: info: unpacking snappy_1.2.1.orig.tar.gz dpkg-source: info: unpacking snappy_1.2.1-1.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying build_static_lib.patch dpkg-source: info: applying readd_pkgconfig_support.patch dpkg-source: info: applying fix_snappy_unittest_FTBFS.patch dpkg-source: info: applying use_packaged_testing.patch dpkg-source: info: applying correct_testing_link.patch dpkg-source: info: applying add_option_to_enable_rtti.patch I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/19023/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='armhf' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=3 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='armhf' IFS=' ' INVOCATION_ID='bfbd0aaed5ab4f30928817c30899adaa' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='19023' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.12X9GkDU/pbuilderrc_YKfw --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.12X9GkDU/b1 --logfile b1/build.log snappy_1.2.1-1.dsc' SUDO_GID='113' SUDO_UID='107' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://10.0.0.15:3142/' I: uname -a Linux virt64c 6.1.0-21-arm64 #1 SMP Debian 6.1.90-1 (2024-05-03) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 May 28 11:25 /bin -> usr/bin I: user script /srv/workspace/pbuilder/19023/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: armhf Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), cmake, pkgconf, libgtest-dev, libgmock-dev, libbenchmark-dev dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19445 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on cmake; however: Package cmake is not installed. pbuilder-satisfydepends-dummy depends on pkgconf; however: Package pkgconf is not installed. pbuilder-satisfydepends-dummy depends on libgtest-dev; however: Package libgtest-dev is not installed. pbuilder-satisfydepends-dummy depends on libgmock-dev; however: Package libgmock-dev is not installed. pbuilder-satisfydepends-dummy depends on libbenchmark-dev; however: Package libbenchmark-dev is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} cmake{a} cmake-data{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} googletest{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libarchive13t64{a} libbenchmark-dev{a} libbenchmark1.8.3{a} libbrotli1{a} libcom-err2{a} libcurl4t64{a} libdebhelper-perl{a} libelf1t64{a} libexpat1{a} libfile-stripnondeterminism-perl{a} libgmock-dev{a} libgssapi-krb5-2{a} libgtest-dev{a} libicu72{a} libjsoncpp25{a} libk5crypto3{a} libkeyutils1{a} libkrb5-3{a} libkrb5support0{a} libldap-2.5-0{a} libmagic-mgc{a} libmagic1t64{a} libnghttp2-14{a} libpipeline1{a} libpkgconf3{a} libproc2-0{a} libpsl5t64{a} librhash0{a} librtmp1{a} libsasl2-2{a} libsasl2-modules-db{a} libssh2-1t64{a} libtool{a} libuchardet0{a} libuv1t64{a} libxml2{a} m4{a} man-db{a} pkgconf{a} pkgconf-bin{a} po-debconf{a} procps{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: ca-certificates curl krb5-locales libarchive-cpio-perl libldap-common libltdl-dev libmail-sendmail-perl libsasl2-modules lynx psmisc publicsuffix wget 0 packages upgraded, 61 newly installed, 0 to remove and 0 not upgraded. Need to get 30.4 MB of archives. After unpacking 116 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main armhf libproc2-0 armhf 2:4.0.4-4 [55.7 kB] Get: 2 http://deb.debian.org/debian trixie/main armhf procps armhf 2:4.0.4-4 [864 kB] Get: 3 http://deb.debian.org/debian trixie/main armhf sensible-utils all 0.0.22 [22.4 kB] Get: 4 http://deb.debian.org/debian trixie/main armhf libmagic-mgc armhf 1:5.45-3 [314 kB] Get: 5 http://deb.debian.org/debian trixie/main armhf libmagic1t64 armhf 1:5.45-3 [98.1 kB] Get: 6 http://deb.debian.org/debian trixie/main armhf file armhf 1:5.45-3 [42.0 kB] Get: 7 http://deb.debian.org/debian trixie/main armhf gettext-base armhf 0.21-14+b1 [157 kB] Get: 8 http://deb.debian.org/debian trixie/main armhf libuchardet0 armhf 0.0.8-1+b1 [65.7 kB] Get: 9 http://deb.debian.org/debian trixie/main armhf groff-base armhf 1.23.0-4 [1090 kB] Get: 10 http://deb.debian.org/debian trixie/main armhf bsdextrautils armhf 2.40.1-2 [85.7 kB] Get: 11 http://deb.debian.org/debian trixie/main armhf libpipeline1 armhf 1.5.7-2 [33.3 kB] Get: 12 http://deb.debian.org/debian trixie/main armhf man-db armhf 2.12.1-1 [1375 kB] Get: 13 http://deb.debian.org/debian trixie/main armhf m4 armhf 1.4.19-4 [264 kB] Get: 14 http://deb.debian.org/debian trixie/main armhf autoconf all 2.71-3 [332 kB] Get: 15 http://deb.debian.org/debian trixie/main armhf autotools-dev all 20220109.1 [51.6 kB] Get: 16 http://deb.debian.org/debian trixie/main armhf automake all 1:1.16.5-1.3 [823 kB] Get: 17 http://deb.debian.org/debian trixie/main armhf autopoint all 0.21-14 [496 kB] Get: 18 http://deb.debian.org/debian trixie/main armhf libicu72 armhf 72.1-4+b1 [9070 kB] Get: 19 http://deb.debian.org/debian trixie/main armhf libxml2 armhf 2.9.14+dfsg-1.3+b3 [598 kB] Get: 20 http://deb.debian.org/debian trixie/main armhf libarchive13t64 armhf 3.7.2-2 [304 kB] Get: 21 http://deb.debian.org/debian trixie/main armhf libbrotli1 armhf 1.1.0-2+b3 [284 kB] Get: 22 http://deb.debian.org/debian trixie/main armhf libkrb5support0 armhf 1.20.1-6+b1 [30.6 kB] Get: 23 http://deb.debian.org/debian trixie/main armhf libcom-err2 armhf 1.47.1-1 [22.1 kB] Get: 24 http://deb.debian.org/debian trixie/main armhf libk5crypto3 armhf 1.20.1-6+b1 [75.5 kB] Get: 25 http://deb.debian.org/debian trixie/main armhf libkeyutils1 armhf 1.6.3-3 [7908 B] Get: 26 http://deb.debian.org/debian trixie/main armhf libkrb5-3 armhf 1.20.1-6+b1 [290 kB] Get: 27 http://deb.debian.org/debian trixie/main armhf libgssapi-krb5-2 armhf 1.20.1-6+b1 [112 kB] Get: 28 http://deb.debian.org/debian trixie/main armhf libsasl2-modules-db armhf 2.1.28+dfsg1-6 [18.0 kB] Get: 29 http://deb.debian.org/debian trixie/main armhf libsasl2-2 armhf 2.1.28+dfsg1-6 [50.1 kB] Get: 30 http://deb.debian.org/debian trixie/main armhf libldap-2.5-0 armhf 2.5.17+dfsg-1 [161 kB] Get: 31 http://deb.debian.org/debian trixie/main armhf libnghttp2-14 armhf 1.61.0-1+b1 [64.1 kB] Get: 32 http://deb.debian.org/debian trixie/main armhf libpsl5t64 armhf 0.21.2-1.1 [55.6 kB] Get: 33 http://deb.debian.org/debian trixie/main armhf librtmp1 armhf 2.4+20151223.gitfa8646d.1-2+b4 [53.2 kB] Get: 34 http://deb.debian.org/debian trixie/main armhf libssh2-1t64 armhf 1.11.0-5 [199 kB] Get: 35 http://deb.debian.org/debian trixie/main armhf libcurl4t64 armhf 8.8.0-1 [394 kB] Get: 36 http://deb.debian.org/debian trixie/main armhf libexpat1 armhf 2.6.2-1 [83.5 kB] Get: 37 http://deb.debian.org/debian trixie/main armhf libjsoncpp25 armhf 1.9.5-6+b2 [69.9 kB] Get: 38 http://deb.debian.org/debian trixie/main armhf librhash0 armhf 1.4.3-3+b1 [143 kB] Get: 39 http://deb.debian.org/debian trixie/main armhf libuv1t64 armhf 1.48.0-4 [134 kB] Get: 40 http://deb.debian.org/debian trixie/main armhf cmake-data all 3.29.3-1 [2167 kB] Get: 41 http://deb.debian.org/debian trixie/main armhf cmake armhf 3.29.3-1+b2 [5216 kB] Get: 42 http://deb.debian.org/debian trixie/main armhf libdebhelper-perl all 13.15.3 [88.0 kB] Get: 43 http://deb.debian.org/debian trixie/main armhf libtool all 2.4.7-7 [517 kB] Get: 44 http://deb.debian.org/debian trixie/main armhf dh-autoreconf all 20 [17.1 kB] Get: 45 http://deb.debian.org/debian trixie/main armhf libarchive-zip-perl all 1.68-1 [104 kB] Get: 46 http://deb.debian.org/debian trixie/main armhf libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get: 47 http://deb.debian.org/debian trixie/main armhf dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get: 48 http://deb.debian.org/debian trixie/main armhf libelf1t64 armhf 0.191-1+b1 [183 kB] Get: 49 http://deb.debian.org/debian trixie/main armhf dwz armhf 0.15-1+b2 [106 kB] Get: 50 http://deb.debian.org/debian trixie/main armhf gettext armhf 0.21-14+b1 [1230 kB] Get: 51 http://deb.debian.org/debian trixie/main armhf intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 52 http://deb.debian.org/debian trixie/main armhf po-debconf all 1.0.21+nmu1 [248 kB] Get: 53 http://deb.debian.org/debian trixie/main armhf debhelper all 13.15.3 [901 kB] Get: 54 http://deb.debian.org/debian trixie/main armhf googletest all 1.14.0-1 [512 kB] Get: 55 http://deb.debian.org/debian trixie/main armhf libbenchmark1.8.3 armhf 1.8.3-3 [106 kB] Get: 56 http://deb.debian.org/debian trixie/main armhf libbenchmark-dev armhf 1.8.3-3 [93.7 kB] Get: 57 http://deb.debian.org/debian trixie/main armhf libgtest-dev armhf 1.14.0-1+b1 [240 kB] Get: 58 http://deb.debian.org/debian trixie/main armhf libgmock-dev armhf 1.14.0-1+b1 [129 kB] Get: 59 http://deb.debian.org/debian trixie/main armhf libpkgconf3 armhf 1.8.1-1+b2 [31.9 kB] Get: 60 http://deb.debian.org/debian trixie/main armhf pkgconf-bin armhf 1.8.1-1+b2 [28.9 kB] Get: 61 http://deb.debian.org/debian trixie/main armhf pkgconf armhf 1.8.1-1+b2 [26.2 kB] Fetched 30.4 MB in 1s (27.5 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package libproc2-0:armhf. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19445 files and directories currently installed.) Preparing to unpack .../00-libproc2-0_2%3a4.0.4-4_armhf.deb ... Unpacking libproc2-0:armhf (2:4.0.4-4) ... Selecting previously unselected package procps. Preparing to unpack .../01-procps_2%3a4.0.4-4_armhf.deb ... Unpacking procps (2:4.0.4-4) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../02-sensible-utils_0.0.22_all.deb ... Unpacking sensible-utils (0.0.22) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../03-libmagic-mgc_1%3a5.45-3_armhf.deb ... Unpacking libmagic-mgc (1:5.45-3) ... Selecting previously unselected package libmagic1t64:armhf. Preparing to unpack .../04-libmagic1t64_1%3a5.45-3_armhf.deb ... Unpacking libmagic1t64:armhf (1:5.45-3) ... Selecting previously unselected package file. Preparing to unpack .../05-file_1%3a5.45-3_armhf.deb ... Unpacking file (1:5.45-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../06-gettext-base_0.21-14+b1_armhf.deb ... Unpacking gettext-base (0.21-14+b1) ... Selecting previously unselected package libuchardet0:armhf. Preparing to unpack .../07-libuchardet0_0.0.8-1+b1_armhf.deb ... Unpacking libuchardet0:armhf (0.0.8-1+b1) ... Selecting previously unselected package groff-base. Preparing to unpack .../08-groff-base_1.23.0-4_armhf.deb ... Unpacking groff-base (1.23.0-4) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../09-bsdextrautils_2.40.1-2_armhf.deb ... Unpacking bsdextrautils (2.40.1-2) ... Selecting previously unselected package libpipeline1:armhf. Preparing to unpack .../10-libpipeline1_1.5.7-2_armhf.deb ... Unpacking libpipeline1:armhf (1.5.7-2) ... Selecting previously unselected package man-db. Preparing to unpack .../11-man-db_2.12.1-1_armhf.deb ... Unpacking man-db (2.12.1-1) ... Selecting previously unselected package m4. Preparing to unpack .../12-m4_1.4.19-4_armhf.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../13-autoconf_2.71-3_all.deb ... Unpacking autoconf (2.71-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../14-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../15-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../16-autopoint_0.21-14_all.deb ... Unpacking autopoint (0.21-14) ... Selecting previously unselected package libicu72:armhf. Preparing to unpack .../17-libicu72_72.1-4+b1_armhf.deb ... Unpacking libicu72:armhf (72.1-4+b1) ... Selecting previously unselected package libxml2:armhf. Preparing to unpack .../18-libxml2_2.9.14+dfsg-1.3+b3_armhf.deb ... Unpacking libxml2:armhf (2.9.14+dfsg-1.3+b3) ... Selecting previously unselected package libarchive13t64:armhf. Preparing to unpack .../19-libarchive13t64_3.7.2-2_armhf.deb ... Unpacking libarchive13t64:armhf (3.7.2-2) ... Selecting previously unselected package libbrotli1:armhf. Preparing to unpack .../20-libbrotli1_1.1.0-2+b3_armhf.deb ... Unpacking libbrotli1:armhf (1.1.0-2+b3) ... Selecting previously unselected package libkrb5support0:armhf. Preparing to unpack .../21-libkrb5support0_1.20.1-6+b1_armhf.deb ... Unpacking libkrb5support0:armhf (1.20.1-6+b1) ... Selecting previously unselected package libcom-err2:armhf. Preparing to unpack .../22-libcom-err2_1.47.1-1_armhf.deb ... Unpacking libcom-err2:armhf (1.47.1-1) ... Selecting previously unselected package libk5crypto3:armhf. Preparing to unpack .../23-libk5crypto3_1.20.1-6+b1_armhf.deb ... Unpacking libk5crypto3:armhf (1.20.1-6+b1) ... Selecting previously unselected package libkeyutils1:armhf. Preparing to unpack .../24-libkeyutils1_1.6.3-3_armhf.deb ... Unpacking libkeyutils1:armhf (1.6.3-3) ... Selecting previously unselected package libkrb5-3:armhf. Preparing to unpack .../25-libkrb5-3_1.20.1-6+b1_armhf.deb ... Unpacking libkrb5-3:armhf (1.20.1-6+b1) ... Selecting previously unselected package libgssapi-krb5-2:armhf. Preparing to unpack .../26-libgssapi-krb5-2_1.20.1-6+b1_armhf.deb ... Unpacking libgssapi-krb5-2:armhf (1.20.1-6+b1) ... Selecting previously unselected package libsasl2-modules-db:armhf. Preparing to unpack .../27-libsasl2-modules-db_2.1.28+dfsg1-6_armhf.deb ... Unpacking libsasl2-modules-db:armhf (2.1.28+dfsg1-6) ... Selecting previously unselected package libsasl2-2:armhf. Preparing to unpack .../28-libsasl2-2_2.1.28+dfsg1-6_armhf.deb ... Unpacking libsasl2-2:armhf (2.1.28+dfsg1-6) ... Selecting previously unselected package libldap-2.5-0:armhf. Preparing to unpack .../29-libldap-2.5-0_2.5.17+dfsg-1_armhf.deb ... Unpacking libldap-2.5-0:armhf (2.5.17+dfsg-1) ... Selecting previously unselected package libnghttp2-14:armhf. Preparing to unpack .../30-libnghttp2-14_1.61.0-1+b1_armhf.deb ... Unpacking libnghttp2-14:armhf (1.61.0-1+b1) ... Selecting previously unselected package libpsl5t64:armhf. Preparing to unpack .../31-libpsl5t64_0.21.2-1.1_armhf.deb ... Unpacking libpsl5t64:armhf (0.21.2-1.1) ... Selecting previously unselected package librtmp1:armhf. Preparing to unpack .../32-librtmp1_2.4+20151223.gitfa8646d.1-2+b4_armhf.deb ... Unpacking librtmp1:armhf (2.4+20151223.gitfa8646d.1-2+b4) ... Selecting previously unselected package libssh2-1t64:armhf. Preparing to unpack .../33-libssh2-1t64_1.11.0-5_armhf.deb ... Unpacking libssh2-1t64:armhf (1.11.0-5) ... Selecting previously unselected package libcurl4t64:armhf. Preparing to unpack .../34-libcurl4t64_8.8.0-1_armhf.deb ... Unpacking libcurl4t64:armhf (8.8.0-1) ... Selecting previously unselected package libexpat1:armhf. Preparing to unpack .../35-libexpat1_2.6.2-1_armhf.deb ... Unpacking libexpat1:armhf (2.6.2-1) ... Selecting previously unselected package libjsoncpp25:armhf. Preparing to unpack .../36-libjsoncpp25_1.9.5-6+b2_armhf.deb ... Unpacking libjsoncpp25:armhf (1.9.5-6+b2) ... Selecting previously unselected package librhash0:armhf. Preparing to unpack .../37-librhash0_1.4.3-3+b1_armhf.deb ... Unpacking librhash0:armhf (1.4.3-3+b1) ... Selecting previously unselected package libuv1t64:armhf. Preparing to unpack .../38-libuv1t64_1.48.0-4_armhf.deb ... Unpacking libuv1t64:armhf (1.48.0-4) ... Selecting previously unselected package cmake-data. Preparing to unpack .../39-cmake-data_3.29.3-1_all.deb ... Unpacking cmake-data (3.29.3-1) ... Selecting previously unselected package cmake. Preparing to unpack .../40-cmake_3.29.3-1+b2_armhf.deb ... Unpacking cmake (3.29.3-1+b2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../41-libdebhelper-perl_13.15.3_all.deb ... Unpacking libdebhelper-perl (13.15.3) ... Selecting previously unselected package libtool. Preparing to unpack .../42-libtool_2.4.7-7_all.deb ... Unpacking libtool (2.4.7-7) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../43-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../44-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../45-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../46-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:armhf. Preparing to unpack .../47-libelf1t64_0.191-1+b1_armhf.deb ... Unpacking libelf1t64:armhf (0.191-1+b1) ... Selecting previously unselected package dwz. Preparing to unpack .../48-dwz_0.15-1+b2_armhf.deb ... Unpacking dwz (0.15-1+b2) ... Selecting previously unselected package gettext. Preparing to unpack .../49-gettext_0.21-14+b1_armhf.deb ... Unpacking gettext (0.21-14+b1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../50-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../51-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../52-debhelper_13.15.3_all.deb ... Unpacking debhelper (13.15.3) ... Selecting previously unselected package googletest. Preparing to unpack .../53-googletest_1.14.0-1_all.deb ... Unpacking googletest (1.14.0-1) ... Selecting previously unselected package libbenchmark1.8.3:armhf. Preparing to unpack .../54-libbenchmark1.8.3_1.8.3-3_armhf.deb ... Unpacking libbenchmark1.8.3:armhf (1.8.3-3) ... Selecting previously unselected package libbenchmark-dev:armhf. Preparing to unpack .../55-libbenchmark-dev_1.8.3-3_armhf.deb ... Unpacking libbenchmark-dev:armhf (1.8.3-3) ... Selecting previously unselected package libgtest-dev:armhf. Preparing to unpack .../56-libgtest-dev_1.14.0-1+b1_armhf.deb ... Unpacking libgtest-dev:armhf (1.14.0-1+b1) ... Selecting previously unselected package libgmock-dev:armhf. Preparing to unpack .../57-libgmock-dev_1.14.0-1+b1_armhf.deb ... Unpacking libgmock-dev:armhf (1.14.0-1+b1) ... Selecting previously unselected package libpkgconf3:armhf. Preparing to unpack .../58-libpkgconf3_1.8.1-1+b2_armhf.deb ... Unpacking libpkgconf3:armhf (1.8.1-1+b2) ... Selecting previously unselected package pkgconf-bin. Preparing to unpack .../59-pkgconf-bin_1.8.1-1+b2_armhf.deb ... Unpacking pkgconf-bin (1.8.1-1+b2) ... Selecting previously unselected package pkgconf:armhf. Preparing to unpack .../60-pkgconf_1.8.1-1+b2_armhf.deb ... Unpacking pkgconf:armhf (1.8.1-1+b2) ... Setting up libexpat1:armhf (2.6.2-1) ... Setting up libpipeline1:armhf (1.5.7-2) ... Setting up libkeyutils1:armhf (1.6.3-3) ... Setting up libicu72:armhf (72.1-4+b1) ... Setting up bsdextrautils (2.40.1-2) ... Setting up libbenchmark1.8.3:armhf (1.8.3-3) ... Setting up libmagic-mgc (1:5.45-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.15.3) ... Setting up libbrotli1:armhf (1.1.0-2+b3) ... Setting up libuv1t64:armhf (1.48.0-4) ... Setting up libbenchmark-dev:armhf (1.8.3-3) ... Setting up libmagic1t64:armhf (1:5.45-3) ... Setting up libpsl5t64:armhf (0.21.2-1.1) ... Setting up libnghttp2-14:armhf (1.61.0-1+b1) ... Setting up gettext-base (0.21-14+b1) ... Setting up m4 (1.4.19-4) ... Setting up libcom-err2:armhf (1.47.1-1) ... Setting up file (1:5.45-3) ... Setting up googletest (1.14.0-1) ... Setting up libelf1t64:armhf (0.191-1+b1) ... Setting up libkrb5support0:armhf (1.20.1-6+b1) ... Setting up libsasl2-modules-db:armhf (2.1.28+dfsg1-6) ... Setting up autotools-dev (20220109.1) ... Setting up libpkgconf3:armhf (1.8.1-1+b2) ... Setting up librtmp1:armhf (2.4+20151223.gitfa8646d.1-2+b4) ... Setting up libproc2-0:armhf (2:4.0.4-4) ... Setting up autopoint (0.21-14) ... Setting up libjsoncpp25:armhf (1.9.5-6+b2) ... Setting up pkgconf-bin (1.8.1-1+b2) ... Setting up libk5crypto3:armhf (1.20.1-6+b1) ... Setting up libsasl2-2:armhf (2.1.28+dfsg1-6) ... Setting up autoconf (2.71-3) ... Setting up dwz (0.15-1+b2) ... Setting up sensible-utils (0.0.22) ... Setting up librhash0:armhf (1.4.3-3+b1) ... Setting up libuchardet0:armhf (0.0.8-1+b1) ... Setting up procps (2:4.0.4-4) ... Setting up cmake-data (3.29.3-1) ... Setting up libkrb5-3:armhf (1.20.1-6+b1) ... Setting up libssh2-1t64:armhf (1.11.0-5) ... Setting up libxml2:armhf (2.9.14+dfsg-1.3+b3) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up gettext (0.21-14+b1) ... Setting up libgtest-dev:armhf (1.14.0-1+b1) ... Setting up libtool (2.4.7-7) ... Setting up libldap-2.5-0:armhf (2.5.17+dfsg-1) ... Setting up pkgconf:armhf (1.8.1-1+b2) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up libgssapi-krb5-2:armhf (1.20.1-6+b1) ... Setting up libgmock-dev:armhf (1.14.0-1+b1) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up groff-base (1.23.0-4) ... Setting up libarchive13t64:armhf (3.7.2-2) ... Setting up libcurl4t64:armhf (8.8.0-1) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.12.1-1) ... Not building database; man-db/auto-update is not 'true'. Setting up cmake (3.29.3-1+b2) ... Setting up debhelper (13.15.3) ... Processing triggers for libc-bin (2.38-11) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/reproducible-path/snappy-1.2.1/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../snappy_1.2.1-1_source.changes dpkg-buildpackage: info: source package snappy dpkg-buildpackage: info: source version 1.2.1-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Laszlo Boszormenyi (GCS) dpkg-source --before-build . dpkg-buildpackage: info: host architecture armhf debian/rules clean dh clean --buildsystem=cmake --builddir=build/ dh_auto_clean -O--buildsystem=cmake -O--builddir=build/ dh_autoreconf_clean -O--buildsystem=cmake -O--builddir=build/ dh_clean -O--buildsystem=cmake -O--builddir=build/ debian/rules binary dh binary --buildsystem=cmake --builddir=build/ dh_update_autotools_config -O--buildsystem=cmake -O--builddir=build/ dh_autoreconf -O--buildsystem=cmake -O--builddir=build/ debian/rules override_dh_auto_configure make[1]: Entering directory '/build/reproducible-path/snappy-1.2.1' dh_auto_configure -- \ -DCMAKE_CXX_STANDARD=14 \ -DCMAKE_BUILD_TYPE=RelWithDebInfo \ -DCMAKE_INSTALL_LIBDIR=/usr/lib/arm-linux-gnueabihf -DBUILD_SHARED_LIBS=ON \ -DSNAPPY_ENABLE_RTTI=ON \ -DSNAPPY_USE_BUNDLED_GTEST=OFF \ -DSNAPPY_USE_BUNDLED_BENCHMARK_LIB=OFF cd build && DEB_PYTHON_INSTALL_LAYOUT=deb cmake -DCMAKE_INSTALL_PREFIX=/usr -DCMAKE_BUILD_TYPE=None -DCMAKE_INSTALL_SYSCONFDIR=/etc -DCMAKE_INSTALL_LOCALSTATEDIR=/var -DCMAKE_EXPORT_NO_PACKAGE_REGISTRY=ON -DCMAKE_FIND_USE_PACKAGE_REGISTRY=OFF -DCMAKE_FIND_PACKAGE_NO_PACKAGE_REGISTRY=ON -DFETCHCONTENT_FULLY_DISCONNECTED=ON -DCMAKE_INSTALL_RUNSTATEDIR=/run -DCMAKE_SKIP_INSTALL_ALL_DEPENDENCY=ON "-GUnix Makefiles" -DCMAKE_VERBOSE_MAKEFILE=ON -DCMAKE_INSTALL_LIBDIR=lib/arm-linux-gnueabihf -DCMAKE_CXX_STANDARD=14 -DCMAKE_BUILD_TYPE=RelWithDebInfo -DCMAKE_INSTALL_LIBDIR=/usr/lib/arm-linux-gnueabihf -DBUILD_SHARED_LIBS=ON -DSNAPPY_ENABLE_RTTI=ON -DSNAPPY_USE_BUNDLED_GTEST=OFF -DSNAPPY_USE_BUNDLED_BENCHMARK_LIB=OFF .. CMake Deprecation Warning at CMakeLists.txt:29 (cmake_minimum_required): Compatibility with CMake < 3.5 will be removed from a future version of CMake. Update the VERSION argument value or use a ... suffix to tell CMake that the project does not need compatibility with older versions. -- The C compiler identification is GNU 13.2.0 -- The CXX compiler identification is GNU 13.2.0 -- Detecting C compiler ABI info -- Detecting C compiler ABI info - done -- Check for working C compiler: /usr/bin/cc - skipped -- Detecting C compile features -- Detecting C compile features - done -- Detecting CXX compiler ABI info -- Detecting CXX compiler ABI info - done -- Check for working CXX compiler: /usr/bin/c++ - skipped -- Detecting CXX compile features -- Detecting CXX compile features - done CMake Warning (dev) in CMakeLists.txt: A logical block opening on the line /build/reproducible-path/snappy-1.2.1/CMakeLists.txt:88 (if) closes on the line /build/reproducible-path/snappy-1.2.1/CMakeLists.txt:91 (endif) with mis-matching arguments. This warning is for project developers. Use -Wno-dev to suppress it. -- Looking for sys/mman.h -- Looking for sys/mman.h - found -- Looking for sys/resource.h -- Looking for sys/resource.h - found -- Looking for sys/time.h -- Looking for sys/time.h - found -- Looking for sys/uio.h -- Looking for sys/uio.h - found -- Looking for unistd.h -- Looking for unistd.h - found -- Looking for windows.h -- Looking for windows.h - not found -- Looking for zlibVersion in z -- Looking for zlibVersion in z - not found -- Looking for lzo1x_1_15_compress in lzo2 -- Looking for lzo1x_1_15_compress in lzo2 - not found -- Looking for LZ4_compress_default in lz4 -- Looking for LZ4_compress_default in lz4 - not found -- Performing Test HAVE_VISUAL_STUDIO_ARCH_AVX -- Performing Test HAVE_VISUAL_STUDIO_ARCH_AVX - Failed -- Performing Test HAVE_VISUAL_STUDIO_ARCH_AVX2 -- Performing Test HAVE_VISUAL_STUDIO_ARCH_AVX2 - Failed -- Performing Test HAVE_CLANG_MAVX -- Performing Test HAVE_CLANG_MAVX - Failed -- Performing Test HAVE_CLANG_MBMI2 -- Performing Test HAVE_CLANG_MBMI2 - Failed -- Performing Test SNAPPY_HAVE_NO_MISSING_FIELD_INITIALIZERS -- Performing Test SNAPPY_HAVE_NO_MISSING_FIELD_INITIALIZERS - Success -- Performing Test SNAPPY_HAVE_NO_IMPLICIT_INT_FLOAT_CONVERSION -- Performing Test SNAPPY_HAVE_NO_IMPLICIT_INT_FLOAT_CONVERSION - Success -- Performing Test HAVE_BUILTIN_EXPECT -- Performing Test HAVE_BUILTIN_EXPECT - Success -- Performing Test HAVE_BUILTIN_CTZ -- Performing Test HAVE_BUILTIN_CTZ - Success -- Performing Test HAVE_BUILTIN_PREFETCH -- Performing Test HAVE_BUILTIN_PREFETCH - Success -- Performing Test HAVE_ATTRIBUTE_ALWAYS_INLINE -- Performing Test HAVE_ATTRIBUTE_ALWAYS_INLINE - Success -- Performing Test SNAPPY_HAVE_SSSE3 -- Performing Test SNAPPY_HAVE_SSSE3 - Failed -- Performing Test SNAPPY_HAVE_X86_CRC32 -- Performing Test SNAPPY_HAVE_X86_CRC32 - Failed -- Performing Test SNAPPY_HAVE_NEON_CRC32 -- Performing Test SNAPPY_HAVE_NEON_CRC32 - Failed -- Performing Test SNAPPY_HAVE_BMI2 -- Performing Test SNAPPY_HAVE_BMI2 - Failed -- Performing Test SNAPPY_HAVE_NEON -- Performing Test SNAPPY_HAVE_NEON - Failed -- Looking for mmap -- Looking for mmap - found -- Looking for sysconf -- Looking for sysconf - found -- Configuring done (20.3s) -- Generating done (0.1s) CMake Warning: Manually-specified variables were not used by the project: CMAKE_EXPORT_NO_PACKAGE_REGISTRY CMAKE_FIND_PACKAGE_NO_PACKAGE_REGISTRY CMAKE_FIND_USE_PACKAGE_REGISTRY FETCHCONTENT_FULLY_DISCONNECTED SNAPPY_USE_BUNDLED_BENCHMARK_LIB SNAPPY_USE_BUNDLED_GTEST -- Build files have been written to: /build/reproducible-path/snappy-1.2.1/build make[1]: Leaving directory '/build/reproducible-path/snappy-1.2.1' dh_auto_build -O--buildsystem=cmake -O--builddir=build/ cd build && make -j3 "INSTALL=install --strip-program=true" VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/snappy-1.2.1/build' /usr/bin/cmake -S/build/reproducible-path/snappy-1.2.1 -B/build/reproducible-path/snappy-1.2.1/build --check-build-system CMakeFiles/Makefile.cmake 0 /usr/bin/cmake -E cmake_progress_start /build/reproducible-path/snappy-1.2.1/build/CMakeFiles /build/reproducible-path/snappy-1.2.1/build//CMakeFiles/progress.marks make -f CMakeFiles/Makefile2 all make[2]: Entering directory '/build/reproducible-path/snappy-1.2.1/build' make -f CMakeFiles/snappy.dir/build.make CMakeFiles/snappy.dir/depend make[3]: Entering directory '/build/reproducible-path/snappy-1.2.1/build' make -f CMakeFiles/snappy-static.dir/build.make CMakeFiles/snappy-static.dir/depend cd /build/reproducible-path/snappy-1.2.1/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /build/reproducible-path/snappy-1.2.1 /build/reproducible-path/snappy-1.2.1 /build/reproducible-path/snappy-1.2.1/build /build/reproducible-path/snappy-1.2.1/build /build/reproducible-path/snappy-1.2.1/build/CMakeFiles/snappy.dir/DependInfo.cmake "--color=" make[3]: Entering directory '/build/reproducible-path/snappy-1.2.1/build' cd /build/reproducible-path/snappy-1.2.1/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /build/reproducible-path/snappy-1.2.1 /build/reproducible-path/snappy-1.2.1 /build/reproducible-path/snappy-1.2.1/build /build/reproducible-path/snappy-1.2.1/build /build/reproducible-path/snappy-1.2.1/build/CMakeFiles/snappy-static.dir/DependInfo.cmake "--color=" make[3]: Leaving directory '/build/reproducible-path/snappy-1.2.1/build' make -f CMakeFiles/snappy.dir/build.make CMakeFiles/snappy.dir/build make[3]: Leaving directory '/build/reproducible-path/snappy-1.2.1/build' make[3]: Entering directory '/build/reproducible-path/snappy-1.2.1/build' make -f CMakeFiles/snappy-static.dir/build.make CMakeFiles/snappy-static.dir/build make[3]: Entering directory '/build/reproducible-path/snappy-1.2.1/build' [ 5%] Building CXX object CMakeFiles/snappy.dir/snappy-sinksource.cc.o /usr/bin/c++ -DHAVE_CONFIG_H -Dsnappy_EXPORTS -I/build/reproducible-path/snappy-1.2.1/build -I/build/reproducible-path/snappy-1.2.1 -g -O2 -ffile-prefix-map=/build/reproducible-path/snappy-1.2.1=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Wextra -Wno-sign-compare -fno-exceptions -O2 -g -DNDEBUG -std=gnu++14 -fPIC -MD -MT CMakeFiles/snappy.dir/snappy-sinksource.cc.o -MF CMakeFiles/snappy.dir/snappy-sinksource.cc.o.d -o CMakeFiles/snappy.dir/snappy-sinksource.cc.o -c /build/reproducible-path/snappy-1.2.1/snappy-sinksource.cc [ 10%] Building CXX object CMakeFiles/snappy-static.dir/snappy-c.cc.o /usr/bin/c++ -I/build/reproducible-path/snappy-1.2.1/build -I/build/reproducible-path/snappy-1.2.1 -g -O2 -ffile-prefix-map=/build/reproducible-path/snappy-1.2.1=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Wextra -Wno-sign-compare -fno-exceptions -O2 -g -DNDEBUG -std=gnu++14 -MD -MT CMakeFiles/snappy-static.dir/snappy-c.cc.o -MF CMakeFiles/snappy-static.dir/snappy-c.cc.o.d -o CMakeFiles/snappy-static.dir/snappy-c.cc.o -c /build/reproducible-path/snappy-1.2.1/snappy-c.cc [ 15%] Building CXX object CMakeFiles/snappy.dir/snappy-c.cc.o /usr/bin/c++ -DHAVE_CONFIG_H -Dsnappy_EXPORTS -I/build/reproducible-path/snappy-1.2.1/build -I/build/reproducible-path/snappy-1.2.1 -g -O2 -ffile-prefix-map=/build/reproducible-path/snappy-1.2.1=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Wextra -Wno-sign-compare -fno-exceptions -O2 -g -DNDEBUG -std=gnu++14 -fPIC -MD -MT CMakeFiles/snappy.dir/snappy-c.cc.o -MF CMakeFiles/snappy.dir/snappy-c.cc.o.d -o CMakeFiles/snappy.dir/snappy-c.cc.o -c /build/reproducible-path/snappy-1.2.1/snappy-c.cc [ 21%] Building CXX object CMakeFiles/snappy.dir/snappy-stubs-internal.cc.o /usr/bin/c++ -DHAVE_CONFIG_H -Dsnappy_EXPORTS -I/build/reproducible-path/snappy-1.2.1/build -I/build/reproducible-path/snappy-1.2.1 -g -O2 -ffile-prefix-map=/build/reproducible-path/snappy-1.2.1=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Wextra -Wno-sign-compare -fno-exceptions -O2 -g -DNDEBUG -std=gnu++14 -fPIC -MD -MT CMakeFiles/snappy.dir/snappy-stubs-internal.cc.o -MF CMakeFiles/snappy.dir/snappy-stubs-internal.cc.o.d -o CMakeFiles/snappy.dir/snappy-stubs-internal.cc.o -c /build/reproducible-path/snappy-1.2.1/snappy-stubs-internal.cc [ 26%] Building CXX object CMakeFiles/snappy-static.dir/snappy-sinksource.cc.o /usr/bin/c++ -I/build/reproducible-path/snappy-1.2.1/build -I/build/reproducible-path/snappy-1.2.1 -g -O2 -ffile-prefix-map=/build/reproducible-path/snappy-1.2.1=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Wextra -Wno-sign-compare -fno-exceptions -O2 -g -DNDEBUG -std=gnu++14 -MD -MT CMakeFiles/snappy-static.dir/snappy-sinksource.cc.o -MF CMakeFiles/snappy-static.dir/snappy-sinksource.cc.o.d -o CMakeFiles/snappy-static.dir/snappy-sinksource.cc.o -c /build/reproducible-path/snappy-1.2.1/snappy-sinksource.cc [ 31%] Building CXX object CMakeFiles/snappy.dir/snappy.cc.o /usr/bin/c++ -DHAVE_CONFIG_H -Dsnappy_EXPORTS -I/build/reproducible-path/snappy-1.2.1/build -I/build/reproducible-path/snappy-1.2.1 -g -O2 -ffile-prefix-map=/build/reproducible-path/snappy-1.2.1=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Wextra -Wno-sign-compare -fno-exceptions -O2 -g -DNDEBUG -std=gnu++14 -fPIC -MD -MT CMakeFiles/snappy.dir/snappy.cc.o -MF CMakeFiles/snappy.dir/snappy.cc.o.d -o CMakeFiles/snappy.dir/snappy.cc.o -c /build/reproducible-path/snappy-1.2.1/snappy.cc [ 36%] Building CXX object CMakeFiles/snappy-static.dir/snappy-stubs-internal.cc.o /usr/bin/c++ -I/build/reproducible-path/snappy-1.2.1/build -I/build/reproducible-path/snappy-1.2.1 -g -O2 -ffile-prefix-map=/build/reproducible-path/snappy-1.2.1=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Wextra -Wno-sign-compare -fno-exceptions -O2 -g -DNDEBUG -std=gnu++14 -MD -MT CMakeFiles/snappy-static.dir/snappy-stubs-internal.cc.o -MF CMakeFiles/snappy-static.dir/snappy-stubs-internal.cc.o.d -o CMakeFiles/snappy-static.dir/snappy-stubs-internal.cc.o -c /build/reproducible-path/snappy-1.2.1/snappy-stubs-internal.cc [ 42%] Building CXX object CMakeFiles/snappy-static.dir/snappy.cc.o /usr/bin/c++ -I/build/reproducible-path/snappy-1.2.1/build -I/build/reproducible-path/snappy-1.2.1 -g -O2 -ffile-prefix-map=/build/reproducible-path/snappy-1.2.1=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Wextra -Wno-sign-compare -fno-exceptions -O2 -g -DNDEBUG -std=gnu++14 -MD -MT CMakeFiles/snappy-static.dir/snappy.cc.o -MF CMakeFiles/snappy-static.dir/snappy.cc.o.d -o CMakeFiles/snappy-static.dir/snappy.cc.o -c /build/reproducible-path/snappy-1.2.1/snappy.cc [ 47%] Linking CXX shared library libsnappy.so /usr/bin/cmake -E cmake_link_script CMakeFiles/snappy.dir/link.txt --verbose=1 /usr/bin/c++ -fPIC -g -O2 -ffile-prefix-map=/build/reproducible-path/snappy-1.2.1=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Wextra -Wno-sign-compare -fno-exceptions -O2 -g -DNDEBUG -Wl,-z,relro -shared -Wl,-soname,libsnappy.so.1 -o libsnappy.so.1.2.1 "CMakeFiles/snappy.dir/snappy-c.cc.o" "CMakeFiles/snappy.dir/snappy-sinksource.cc.o" "CMakeFiles/snappy.dir/snappy-stubs-internal.cc.o" CMakeFiles/snappy.dir/snappy.cc.o /usr/bin/cmake -E cmake_symlink_library libsnappy.so.1.2.1 libsnappy.so.1 libsnappy.so make[3]: Leaving directory '/build/reproducible-path/snappy-1.2.1/build' [ 47%] Built target snappy make -f CMakeFiles/snappy_test_support.dir/build.make CMakeFiles/snappy_test_support.dir/depend make[3]: Entering directory '/build/reproducible-path/snappy-1.2.1/build' cd /build/reproducible-path/snappy-1.2.1/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /build/reproducible-path/snappy-1.2.1 /build/reproducible-path/snappy-1.2.1 /build/reproducible-path/snappy-1.2.1/build /build/reproducible-path/snappy-1.2.1/build /build/reproducible-path/snappy-1.2.1/build/CMakeFiles/snappy_test_support.dir/DependInfo.cmake "--color=" make[3]: Leaving directory '/build/reproducible-path/snappy-1.2.1/build' make -f CMakeFiles/snappy_test_support.dir/build.make CMakeFiles/snappy_test_support.dir/build make[3]: Entering directory '/build/reproducible-path/snappy-1.2.1/build' [ 52%] Building CXX object CMakeFiles/snappy_test_support.dir/snappy-test.cc.o /usr/bin/c++ -DHAVE_CONFIG_H -Dsnappy_test_support_EXPORTS -I/build/reproducible-path/snappy-1.2.1 -I/build/reproducible-path/snappy-1.2.1/build -g -O2 -ffile-prefix-map=/build/reproducible-path/snappy-1.2.1=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Wextra -Wno-sign-compare -fno-exceptions -O2 -g -DNDEBUG -std=gnu++14 -fPIC -MD -MT CMakeFiles/snappy_test_support.dir/snappy-test.cc.o -MF CMakeFiles/snappy_test_support.dir/snappy-test.cc.o.d -o CMakeFiles/snappy_test_support.dir/snappy-test.cc.o -c /build/reproducible-path/snappy-1.2.1/snappy-test.cc [ 57%] Building CXX object CMakeFiles/snappy_test_support.dir/snappy_test_data.cc.o /usr/bin/c++ -DHAVE_CONFIG_H -Dsnappy_test_support_EXPORTS -I/build/reproducible-path/snappy-1.2.1 -I/build/reproducible-path/snappy-1.2.1/build -g -O2 -ffile-prefix-map=/build/reproducible-path/snappy-1.2.1=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Wextra -Wno-sign-compare -fno-exceptions -O2 -g -DNDEBUG -std=gnu++14 -fPIC -MD -MT CMakeFiles/snappy_test_support.dir/snappy_test_data.cc.o -MF CMakeFiles/snappy_test_support.dir/snappy_test_data.cc.o.d -o CMakeFiles/snappy_test_support.dir/snappy_test_data.cc.o -c /build/reproducible-path/snappy-1.2.1/snappy_test_data.cc [ 63%] Linking CXX static library libsnappy.a /usr/bin/cmake -P CMakeFiles/snappy-static.dir/cmake_clean_target.cmake /usr/bin/cmake -E cmake_link_script CMakeFiles/snappy-static.dir/link.txt --verbose=1 /usr/bin/ar qc libsnappy.a "CMakeFiles/snappy-static.dir/snappy-c.cc.o" "CMakeFiles/snappy-static.dir/snappy-sinksource.cc.o" "CMakeFiles/snappy-static.dir/snappy-stubs-internal.cc.o" "CMakeFiles/snappy-static.dir/snappy.cc.o" /usr/bin/ranlib libsnappy.a make[3]: Leaving directory '/build/reproducible-path/snappy-1.2.1/build' [ 63%] Built target snappy-static [ 68%] Linking CXX shared library libsnappy_test_support.so /usr/bin/cmake -E cmake_link_script CMakeFiles/snappy_test_support.dir/link.txt --verbose=1 /usr/bin/c++ -fPIC -g -O2 -ffile-prefix-map=/build/reproducible-path/snappy-1.2.1=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Wextra -Wno-sign-compare -fno-exceptions -O2 -g -DNDEBUG -Wl,-z,relro -shared -Wl,-soname,libsnappy_test_support.so -o libsnappy_test_support.so "CMakeFiles/snappy_test_support.dir/snappy-test.cc.o" CMakeFiles/snappy_test_support.dir/snappy_test_data.cc.o -Wl,-rpath,/build/reproducible-path/snappy-1.2.1/build libsnappy.so.1.2.1 make[3]: Leaving directory '/build/reproducible-path/snappy-1.2.1/build' [ 68%] Built target snappy_test_support make -f CMakeFiles/snappy_unittest.dir/build.make CMakeFiles/snappy_unittest.dir/depend make[3]: Entering directory '/build/reproducible-path/snappy-1.2.1/build' make -f CMakeFiles/snappy_test_tool.dir/build.make CMakeFiles/snappy_test_tool.dir/depend cd /build/reproducible-path/snappy-1.2.1/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /build/reproducible-path/snappy-1.2.1 /build/reproducible-path/snappy-1.2.1 /build/reproducible-path/snappy-1.2.1/build /build/reproducible-path/snappy-1.2.1/build /build/reproducible-path/snappy-1.2.1/build/CMakeFiles/snappy_unittest.dir/DependInfo.cmake "--color=" make -f CMakeFiles/snappy_benchmark.dir/build.make CMakeFiles/snappy_benchmark.dir/depend make[3]: Entering directory '/build/reproducible-path/snappy-1.2.1/build' cd /build/reproducible-path/snappy-1.2.1/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /build/reproducible-path/snappy-1.2.1 /build/reproducible-path/snappy-1.2.1 /build/reproducible-path/snappy-1.2.1/build /build/reproducible-path/snappy-1.2.1/build /build/reproducible-path/snappy-1.2.1/build/CMakeFiles/snappy_test_tool.dir/DependInfo.cmake "--color=" make[3]: Entering directory '/build/reproducible-path/snappy-1.2.1/build' cd /build/reproducible-path/snappy-1.2.1/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /build/reproducible-path/snappy-1.2.1 /build/reproducible-path/snappy-1.2.1 /build/reproducible-path/snappy-1.2.1/build /build/reproducible-path/snappy-1.2.1/build /build/reproducible-path/snappy-1.2.1/build/CMakeFiles/snappy_benchmark.dir/DependInfo.cmake "--color=" make[3]: Leaving directory '/build/reproducible-path/snappy-1.2.1/build' make -f CMakeFiles/snappy_unittest.dir/build.make CMakeFiles/snappy_unittest.dir/build make[3]: Leaving directory '/build/reproducible-path/snappy-1.2.1/build' make[3]: Entering directory '/build/reproducible-path/snappy-1.2.1/build' make -f CMakeFiles/snappy_test_tool.dir/build.make CMakeFiles/snappy_test_tool.dir/build make[3]: Entering directory '/build/reproducible-path/snappy-1.2.1/build' make[3]: Leaving directory '/build/reproducible-path/snappy-1.2.1/build' make -f CMakeFiles/snappy_benchmark.dir/build.make CMakeFiles/snappy_benchmark.dir/build [ 73%] Building CXX object CMakeFiles/snappy_unittest.dir/snappy_unittest.cc.o /usr/bin/c++ -DHAVE_CONFIG_H -I/build/reproducible-path/snappy-1.2.1 -I/build/reproducible-path/snappy-1.2.1/build -g -O2 -ffile-prefix-map=/build/reproducible-path/snappy-1.2.1=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Wextra -Wno-sign-compare -fno-exceptions -O2 -g -DNDEBUG -std=gnu++14 -MD -MT CMakeFiles/snappy_unittest.dir/snappy_unittest.cc.o -MF CMakeFiles/snappy_unittest.dir/snappy_unittest.cc.o.d -o CMakeFiles/snappy_unittest.dir/snappy_unittest.cc.o -c /build/reproducible-path/snappy-1.2.1/snappy_unittest.cc make[3]: Entering directory '/build/reproducible-path/snappy-1.2.1/build' [ 78%] Building CXX object CMakeFiles/snappy_test_tool.dir/snappy_test_tool.cc.o /usr/bin/c++ -DHAVE_CONFIG_H -I/build/reproducible-path/snappy-1.2.1 -I/build/reproducible-path/snappy-1.2.1/build -g -O2 -ffile-prefix-map=/build/reproducible-path/snappy-1.2.1=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Wextra -Wno-sign-compare -fno-exceptions -O2 -g -DNDEBUG -std=gnu++14 -MD -MT CMakeFiles/snappy_test_tool.dir/snappy_test_tool.cc.o -MF CMakeFiles/snappy_test_tool.dir/snappy_test_tool.cc.o.d -o CMakeFiles/snappy_test_tool.dir/snappy_test_tool.cc.o -c /build/reproducible-path/snappy-1.2.1/snappy_test_tool.cc [ 84%] Building CXX object CMakeFiles/snappy_benchmark.dir/snappy_benchmark.cc.o /usr/bin/c++ -DHAVE_CONFIG_H -I/build/reproducible-path/snappy-1.2.1 -I/build/reproducible-path/snappy-1.2.1/build -g -O2 -ffile-prefix-map=/build/reproducible-path/snappy-1.2.1=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Wextra -Wno-sign-compare -fno-exceptions -O2 -g -DNDEBUG -std=gnu++14 -MD -MT CMakeFiles/snappy_benchmark.dir/snappy_benchmark.cc.o -MF CMakeFiles/snappy_benchmark.dir/snappy_benchmark.cc.o.d -o CMakeFiles/snappy_benchmark.dir/snappy_benchmark.cc.o -c /build/reproducible-path/snappy-1.2.1/snappy_benchmark.cc In file included from /usr/include/c++/13/vector:72, from /build/reproducible-path/snappy-1.2.1/snappy_benchmark.cc:32: /usr/include/c++/13/bits/vector.tcc: In member function 'void std::vector<_Tp, _Alloc>::_M_realloc_insert(iterator, _Args&& ...) [with _Args = {const long long int&}; _Tp = long long int; _Alloc = std::allocator]': /usr/include/c++/13/bits/vector.tcc:445:7: note: parameter passing for argument of type 'std::vector::iterator' changed in GCC 7.1 445 | vector<_Tp, _Alloc>:: | ^~~~~~~~~~~~~~~~~~~ In file included from /usr/include/c++/13/vector:66: In member function 'void std::vector<_Tp, _Alloc>::push_back(const value_type&) [with _Tp = long long int; _Alloc = std::allocator]', inlined from 'benchmark::internal::Benchmark* benchmark::internal::Benchmark::ArgPair(int64_t, int64_t)' at /usr/include/benchmark/benchmark.h:1119:19, inlined from 'void snappy::{anonymous}::FilesAndLevels(benchmark::internal::Benchmark*)' at /build/reproducible-path/snappy-1.2.1/snappy_benchmark.cc:49:25: /usr/include/c++/13/bits/stl_vector.h:1292:28: note: parameter passing for argument of type '__gnu_cxx::__normal_iterator >' changed in GCC 7.1 1292 | _M_realloc_insert(end(), __x); | ~~~~~~~~~~~~~~~~~^~~~~~~~~~~~ In member function 'void std::vector<_Tp, _Alloc>::push_back(const value_type&) [with _Tp = long long int; _Alloc = std::allocator]', inlined from 'benchmark::internal::Benchmark* benchmark::internal::Benchmark::ArgPair(int64_t, int64_t)' at /usr/include/benchmark/benchmark.h:1120:19, inlined from 'void snappy::{anonymous}::FilesAndLevels(benchmark::internal::Benchmark*)' at /build/reproducible-path/snappy-1.2.1/snappy_benchmark.cc:49:25: /usr/include/c++/13/bits/stl_vector.h:1292:28: note: parameter passing for argument of type '__gnu_cxx::__normal_iterator >' changed in GCC 7.1 1292 | _M_realloc_insert(end(), __x); | ~~~~~~~~~~~~~~~~~^~~~~~~~~~~~ [ 89%] Linking CXX executable snappy_test_tool /usr/bin/cmake -E cmake_link_script CMakeFiles/snappy_test_tool.dir/link.txt --verbose=1 /usr/bin/c++ -g -O2 -ffile-prefix-map=/build/reproducible-path/snappy-1.2.1=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Wextra -Wno-sign-compare -fno-exceptions -O2 -g -DNDEBUG -Wl,-z,relro -rdynamic CMakeFiles/snappy_test_tool.dir/snappy_test_tool.cc.o -o snappy_test_tool -Wl,-rpath,/build/reproducible-path/snappy-1.2.1/build libsnappy_test_support.so libsnappy.so.1.2.1 make[3]: Leaving directory '/build/reproducible-path/snappy-1.2.1/build' [ 89%] Built target snappy_test_tool [ 94%] Linking CXX executable snappy_benchmark /usr/bin/cmake -E cmake_link_script CMakeFiles/snappy_benchmark.dir/link.txt --verbose=1 /usr/bin/c++ -g -O2 -ffile-prefix-map=/build/reproducible-path/snappy-1.2.1=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Wextra -Wno-sign-compare -fno-exceptions -O2 -g -DNDEBUG -Wl,-z,relro -rdynamic CMakeFiles/snappy_benchmark.dir/snappy_benchmark.cc.o -o snappy_benchmark -Wl,-rpath,/build/reproducible-path/snappy-1.2.1/build libsnappy_test_support.so -lbenchmark_main -lbenchmark -lpthread libsnappy.so.1.2.1 make[3]: Leaving directory '/build/reproducible-path/snappy-1.2.1/build' [ 94%] Built target snappy_benchmark [100%] Linking CXX executable snappy_unittest /usr/bin/cmake -E cmake_link_script CMakeFiles/snappy_unittest.dir/link.txt --verbose=1 /usr/bin/c++ -g -O2 -ffile-prefix-map=/build/reproducible-path/snappy-1.2.1=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Wextra -Wno-sign-compare -fno-exceptions -O2 -g -DNDEBUG -Wl,-z,relro -rdynamic CMakeFiles/snappy_unittest.dir/snappy_unittest.cc.o -o snappy_unittest -Wl,-rpath,/build/reproducible-path/snappy-1.2.1/build libsnappy_test_support.so -lgmock_main -lgmock -lgtest -lpthread libsnappy.so.1.2.1 make[3]: Leaving directory '/build/reproducible-path/snappy-1.2.1/build' [100%] Built target snappy_unittest make[2]: Leaving directory '/build/reproducible-path/snappy-1.2.1/build' /usr/bin/cmake -E cmake_progress_start /build/reproducible-path/snappy-1.2.1/build/CMakeFiles 0 make[1]: Leaving directory '/build/reproducible-path/snappy-1.2.1/build' dh_auto_test -O--buildsystem=cmake -O--builddir=build/ cd build && make -j3 test ARGS\+=--verbose ARGS\+=-j3 make[1]: Entering directory '/build/reproducible-path/snappy-1.2.1/build' Running tests... /usr/bin/ctest --force-new-ctest-process --verbose -j3 UpdateCTestConfiguration from :/build/reproducible-path/snappy-1.2.1/build/DartConfiguration.tcl UpdateCTestConfiguration from :/build/reproducible-path/snappy-1.2.1/build/DartConfiguration.tcl Test project /build/reproducible-path/snappy-1.2.1/build Constructing a list of tests Done constructing a list of tests Updating test list for fixtures Added 0 tests to meet fixture requirements Checking test dependency graph... Checking test dependency graph end test 1 Start 1: snappy_unittest 1: Test command: /build/reproducible-path/snappy-1.2.1/build/snappy_unittest 1: Working Directory: /build/reproducible-path/snappy-1.2.1 1: Test timeout computed to be: 10000000 1: Running main() from gmock_main.cc 1: [==========] Running 21 tests from 3 test suites. 1: [----------] Global test environment set-up. 1: [----------] 1 test from CorruptedTest 1: [ RUN ] CorruptedTest.VerifyCorrupted 1: [ OK ] CorruptedTest.VerifyCorrupted (11 ms) 1: [----------] 1 test from CorruptedTest (11 ms total) 1: 1: [----------] 17 tests from Snappy 1: [ RUN ] Snappy.SimpleTests 1: [ OK ] Snappy.SimpleTests (13 ms) 1: [ RUN ] Snappy.AppendSelfPatternExtensionEdgeCases 1: [ OK ] Snappy.AppendSelfPatternExtensionEdgeCases (2 ms) 1: [ RUN ] Snappy.AppendSelfPatternExtensionEdgeCasesExhaustive 1: [ OK ] Snappy.AppendSelfPatternExtensionEdgeCasesExhaustive (4696 ms) 1: [ RUN ] Snappy.MaxBlowup 1: [ OK ] Snappy.MaxBlowup (8 ms) 1: [ RUN ] Snappy.RandomData 1: [ OK ] Snappy.RandomData (30913 ms) 1: [ RUN ] Snappy.FourByteOffset 1: [ OK ] Snappy.FourByteOffset (4 ms) 1: [ RUN ] Snappy.IOVecSourceEdgeCases 1: [ OK ] Snappy.IOVecSourceEdgeCases (0 ms) 1: [ RUN ] Snappy.IOVecSinkEdgeCases 1: [ OK ] Snappy.IOVecSinkEdgeCases (0 ms) 1: [ RUN ] Snappy.IOVecLiteralOverflow 1: [ OK ] Snappy.IOVecLiteralOverflow (0 ms) 1: [ RUN ] Snappy.IOVecCopyOverflow 1: [ OK ] Snappy.IOVecCopyOverflow (0 ms) 1: [ RUN ] Snappy.ReadPastEndOfBuffer 1: [ OK ] Snappy.ReadPastEndOfBuffer (0 ms) 1: [ RUN ] Snappy.ZeroOffsetCopy 1: [ OK ] Snappy.ZeroOffsetCopy (0 ms) 1: [ RUN ] Snappy.ZeroOffsetCopyValidation 1: [ OK ] Snappy.ZeroOffsetCopyValidation (0 ms) 1: [ RUN ] Snappy.FindMatchLength 1: [ OK ] Snappy.FindMatchLength (0 ms) 1: [ RUN ] Snappy.FindMatchLengthRandom 1: [ OK ] Snappy.FindMatchLengthRandom (1428 ms) 1: [ RUN ] Snappy.VerifyCharTable 1: [ OK ] Snappy.VerifyCharTable (0 ms) 1: [ RUN ] Snappy.TestBenchmarkFiles 1: [ OK ] Snappy.TestBenchmarkFiles (514 ms) 1: [----------] 17 tests from Snappy (37583 ms total) 1: 1: [----------] 3 tests from SnappyCorruption 1: [ RUN ] SnappyCorruption.TruncatedVarint 1: [ OK ] SnappyCorruption.TruncatedVarint (0 ms) 1: [ RUN ] SnappyCorruption.UnterminatedVarint 1: [ OK ] SnappyCorruption.UnterminatedVarint (0 ms) 1: [ RUN ] SnappyCorruption.OverflowingVarint 1: [ OK ] SnappyCorruption.OverflowingVarint (0 ms) 1: [----------] 3 tests from SnappyCorruption (0 ms total) 1: 1: [----------] Global test environment tear-down 1: [==========] 21 tests from 3 test suites ran. (37594 ms total) 1: [ PASSED ] 21 tests. 1/1 Test #1: snappy_unittest .................. Passed 37.62 sec 100% tests passed, 0 tests failed out of 1 Total Test time (real) = 37.63 sec make[1]: Leaving directory '/build/reproducible-path/snappy-1.2.1/build' create-stamp debian/debhelper-build-stamp dh_testroot -O--buildsystem=cmake -O--builddir=build/ dh_prep -O--buildsystem=cmake -O--builddir=build/ dh_installdirs -O--buildsystem=cmake -O--builddir=build/ dh_auto_install -O--buildsystem=cmake -O--builddir=build/ cd build && make -j3 install DESTDIR=/build/reproducible-path/snappy-1.2.1/debian/tmp AM_UPDATE_INFO_DIR=no "INSTALL=install --strip-program=true" make[1]: Entering directory '/build/reproducible-path/snappy-1.2.1/build' /usr/bin/cmake -S/build/reproducible-path/snappy-1.2.1 -B/build/reproducible-path/snappy-1.2.1/build --check-build-system CMakeFiles/Makefile.cmake 0 make -f CMakeFiles/Makefile2 preinstall make[2]: Entering directory '/build/reproducible-path/snappy-1.2.1/build' make[2]: Nothing to be done for 'preinstall'. make[2]: Leaving directory '/build/reproducible-path/snappy-1.2.1/build' Install the project... /usr/bin/cmake -P cmake_install.cmake -- Install configuration: "RelWithDebInfo" -- Installing: /build/reproducible-path/snappy-1.2.1/debian/tmp/usr/lib/arm-linux-gnueabihf/pkgconfig/snappy.pc -- Installing: /build/reproducible-path/snappy-1.2.1/debian/tmp/usr/lib/arm-linux-gnueabihf/libsnappy.so.1.2.1 -- Installing: /build/reproducible-path/snappy-1.2.1/debian/tmp/usr/lib/arm-linux-gnueabihf/libsnappy.so.1 -- Installing: /build/reproducible-path/snappy-1.2.1/debian/tmp/usr/lib/arm-linux-gnueabihf/libsnappy.so -- Installing: /build/reproducible-path/snappy-1.2.1/debian/tmp/usr/lib/arm-linux-gnueabihf/libsnappy.a -- Installing: /build/reproducible-path/snappy-1.2.1/debian/tmp/usr/include/snappy-c.h -- Installing: /build/reproducible-path/snappy-1.2.1/debian/tmp/usr/include/snappy-sinksource.h -- Installing: /build/reproducible-path/snappy-1.2.1/debian/tmp/usr/include/snappy.h -- Installing: /build/reproducible-path/snappy-1.2.1/debian/tmp/usr/include/snappy-stubs-public.h -- Installing: /build/reproducible-path/snappy-1.2.1/debian/tmp/usr/lib/arm-linux-gnueabihf/cmake/Snappy/SnappyTargets.cmake -- Installing: /build/reproducible-path/snappy-1.2.1/debian/tmp/usr/lib/arm-linux-gnueabihf/cmake/Snappy/SnappyTargets-relwithdebinfo.cmake -- Installing: /build/reproducible-path/snappy-1.2.1/debian/tmp/usr/lib/arm-linux-gnueabihf/cmake/Snappy/SnappyConfig.cmake -- Installing: /build/reproducible-path/snappy-1.2.1/debian/tmp/usr/lib/arm-linux-gnueabihf/cmake/Snappy/SnappyConfigVersion.cmake make[1]: Leaving directory '/build/reproducible-path/snappy-1.2.1/build' debian/rules override_dh_install make[1]: Entering directory '/build/reproducible-path/snappy-1.2.1' dh_install ln -s /usr/lib/arm-linux-gnueabihf/libsnappy.a \ /build/reproducible-path/snappy-1.2.1/debian/libsnappy-dev/usr/lib/arm-linux-gnueabihf/libsnappy-shared.a make[1]: Leaving directory '/build/reproducible-path/snappy-1.2.1' dh_installdocs -O--buildsystem=cmake -O--builddir=build/ dh_installchangelogs -O--buildsystem=cmake -O--builddir=build/ dh_installsystemduser -O--buildsystem=cmake -O--builddir=build/ dh_perl -O--buildsystem=cmake -O--builddir=build/ dh_link -O--buildsystem=cmake -O--builddir=build/ dh_strip_nondeterminism -O--buildsystem=cmake -O--builddir=build/ dh_compress -O--buildsystem=cmake -O--builddir=build/ dh_fixperms -O--buildsystem=cmake -O--builddir=build/ dh_missing -O--buildsystem=cmake -O--builddir=build/ dh_dwz -a -O--buildsystem=cmake -O--builddir=build/ dh_strip -a -O--buildsystem=cmake -O--builddir=build/ dh_makeshlibs -a -O--buildsystem=cmake -O--builddir=build/ dh_shlibdeps -a -O--buildsystem=cmake -O--builddir=build/ dh_installdeb -O--buildsystem=cmake -O--builddir=build/ dh_gencontrol -O--buildsystem=cmake -O--builddir=build/ dh_md5sums -O--buildsystem=cmake -O--builddir=build/ dh_builddeb -O--buildsystem=cmake -O--builddir=build/ dpkg-deb: building package 'libsnappy-dev' in '../libsnappy-dev_1.2.1-1_armhf.deb'. dpkg-deb: building package 'libsnappy1v5-dbgsym' in '../libsnappy1v5-dbgsym_1.2.1-1_armhf.deb'. dpkg-deb: building package 'libsnappy1v5' in '../libsnappy1v5_1.2.1-1_armhf.deb'. dpkg-genbuildinfo --build=binary -O../snappy_1.2.1-1_armhf.buildinfo dpkg-genchanges --build=binary -O../snappy_1.2.1-1_armhf.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: including full source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/19023 and its subdirectories I: Current time: Wed May 29 00:43:33 -12 2024 I: pbuilder-time-stamp: 1716986613 Wed May 29 12:43:47 UTC 2024 I: 1st build successful. Starting 2nd build on remote node virt32c-armhf-rb.debian.net. Wed May 29 12:43:47 UTC 2024 I: Preparing to do remote build '2' on virt32c-armhf-rb.debian.net. Wed May 29 12:47:07 UTC 2024 I: Deleting $TMPDIR on virt32c-armhf-rb.debian.net. Wed May 29 12:47:09 UTC 2024 I: snappy_1.2.1-1_armhf.changes: Format: 1.8 Date: Wed, 22 May 2024 17:18:35 +0200 Source: snappy Binary: libsnappy-dev libsnappy1v5 libsnappy1v5-dbgsym Architecture: armhf Version: 1.2.1-1 Distribution: unstable Urgency: medium Maintainer: Laszlo Boszormenyi (GCS) Changed-By: Laszlo Boszormenyi (GCS) Description: libsnappy-dev - fast compression/decompression library (development files) libsnappy1v5 - fast compression/decompression library Closes: 1070785 Changes: snappy (1.2.1-1) unstable; urgency=medium . * New upstream release: - restores full ABI and API compatibility (closes: #1070785). * Use no for Rules-Requires-Root. Checksums-Sha1: e3e0a52dd8ae133b58bdbb05ebafca04689d8c89 41908 libsnappy-dev_1.2.1-1_armhf.deb bab5dd5d68bdb95bca746c71030eaf7ed15ec996 134272 libsnappy1v5-dbgsym_1.2.1-1_armhf.deb d0322f2b2e42cbde4c6858c1745752acc0f0200f 26804 libsnappy1v5_1.2.1-1_armhf.deb 9a59f886e34bb3156de4b56f3276c84332c30035 6327 snappy_1.2.1-1_armhf.buildinfo Checksums-Sha256: 3034813c045a75e572ed25d44bf1fa74b4c117792c73861fe1af8abfa78d4d39 41908 libsnappy-dev_1.2.1-1_armhf.deb 7d4fdb3af4415f76b997b5328a7f922d9ecdd473d26f3fa72d1fd0901d64febb 134272 libsnappy1v5-dbgsym_1.2.1-1_armhf.deb cb9a504ef3bbf96aa9e88e58bb65ec5d9172813d76bd6deaf6c419fcfb05f043 26804 libsnappy1v5_1.2.1-1_armhf.deb 8bf49cdfebf2c6730012f6316c4e156c805d101d874f80e44f53a8841ab20946 6327 snappy_1.2.1-1_armhf.buildinfo Files: f7c968d69211e8a72a61e245038d2bd1 41908 libdevel optional libsnappy-dev_1.2.1-1_armhf.deb 8fc800f89c037b0a781380c85e6bfffe 134272 debug optional libsnappy1v5-dbgsym_1.2.1-1_armhf.deb d13d9abd85e41e7760c8e4d685e6b2e3 26804 libs optional libsnappy1v5_1.2.1-1_armhf.deb f9e4732f8dd7d17884f3a9c7aecc1afb 6327 libs optional snappy_1.2.1-1_armhf.buildinfo Wed May 29 12:47:10 UTC 2024 I: diffoscope 268 will be used to compare the two builds: Running as unit: rb-diffoscope-armhf_32-17441.service # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.12X9GkDU/snappy_1.2.1-1.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.12X9GkDU/snappy_1.2.1-1.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.12X9GkDU/snappy_1.2.1-1.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.12X9GkDU/b1/snappy_1.2.1-1_armhf.changes /srv/reproducible-results/rbuild-debian/r-b-build.12X9GkDU/b2/snappy_1.2.1-1_armhf.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.359s) 0.359s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.020s) 0.020s 12 calls diffoscope.comparators.binary.FilesystemFile ## specialize (total time: 0.000s) 0.000s 1 call specialize Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 687ms CPU time consumed: 686ms Wed May 29 12:47:11 UTC 2024 I: diffoscope 268 found no differences in the changes files, and a .buildinfo file also exists. Wed May 29 12:47:11 UTC 2024 I: snappy from trixie built successfully and reproducibly on armhf. Wed May 29 12:47:13 UTC 2024 I: Submitting .buildinfo files to external archives: Wed May 29 12:47:13 UTC 2024 I: Submitting 8.0K b1/snappy_1.2.1-1_armhf.buildinfo.asc Wed May 29 12:47:14 UTC 2024 I: Submitting 8.0K b2/snappy_1.2.1-1_armhf.buildinfo.asc Wed May 29 12:47:16 UTC 2024 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Wed May 29 12:47:16 UTC 2024 I: Done submitting .buildinfo files. Wed May 29 12:47:16 UTC 2024 I: Removing signed snappy_1.2.1-1_armhf.buildinfo.asc files: removed './b1/snappy_1.2.1-1_armhf.buildinfo.asc' removed './b2/snappy_1.2.1-1_armhf.buildinfo.asc'