Sun May 12 02:11:15 UTC 2024 I: starting to build sleepd/trixie/armhf on jenkins on '2024-05-12 02:11' Sun May 12 02:11:15 UTC 2024 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/armhf_31/4886/console.log Sun May 12 02:11:15 UTC 2024 I: Downloading source for trixie/sleepd=2.11 --2024-05-12 02:11:15-- http://deb.debian.org/debian/pool/main/s/sleepd/sleepd_2.11.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 1585 (1.5K) [text/prs.lines.tag] Saving to: ‘sleepd_2.11.dsc’ 0K . 100% 123M=0s 2024-05-12 02:11:15 (123 MB/s) - ‘sleepd_2.11.dsc’ saved [1585/1585] Sun May 12 02:11:16 UTC 2024 I: sleepd_2.11.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (native) Source: sleepd Binary: sleepd Architecture: any Version: 2.11 Maintainer: Debian QA Group Homepage: https://kitenet.net/~joey/code/sleepd/ Standards-Version: 4.5.0 Vcs-Browser: https://salsa.debian.org/debian/sleepd Vcs-Git: https://salsa.debian.org/debian/sleepd.git Build-Depends: debhelper-compat (= 13), dpkg-dev (>= 1.9.0), libupower-glib-dev Package-List: sleepd deb admin optional arch=any Checksums-Sha1: 23cfe671cffc7e8064f65f3e82f081b8627b6f35 28328 sleepd_2.11.tar.xz Checksums-Sha256: 9568c8d9ddd1baa573cd0105c92d7e67b18cc18a42c57bf48ef6cb8f47fc880f 28328 sleepd_2.11.tar.xz Files: 79938282591bd9ba75e62435501666ea 28328 sleepd_2.11.tar.xz -----BEGIN PGP SIGNATURE----- iQIzBAEBCgAdFiEEkjZVexcMh/iCHArDweDZLphvfH4FAl7Rf+YACgkQweDZLphv fH4L/w//evbiX32sd6u8uvLY6l7qQBV24XfzKCtnf4GRi6obyQMcjhrG7RfluZJ7 sxitqb5g8MOwROWNB8/WQidyRUN3hPL3zEoCiWvD/cNQ/dyOw3j9KNp5nLuyoAsO EpaSxU6CcFK6vVt82hJT2KFd/5AuPbw8idQHEmaXUZXIbCH6iGV8AkAQjgBinj+o MnfpBKMXAfrS3+AvlTXyPcNR5N7ghPpu+rlRRUviVJ/EYh+42pMq9ZQ/LLm9ZbtA Wx8hopoMEqwxhI8h08PHhXw3ObttJpYukrPka/QHXpIPLwE8e2EPNIZ+hNVG6pc7 kW+jc92cQgbltG5CCG7oqgn6eE/2t4k41/3BLWL2bUXP9OxyCP742uAUsPhdq1fN suzamjGXJMoIwTDBLW3I20RrU3cBO9B4RJMaLeHeHqmH52AupRkTrpIpQB3OOkym sGFsIg/U7R7ycy0T2tX7XfmF2jw11j/GOVdO4Ic/UWQhGNDrIsCVfQS02yF5dzbq GcOCHugjfYCI6WnE1FXHfg1xTxdDqZM4DU8SD/1QBjHphD+PcvYB57DKxcWjFAnV AfLXWa8NuDH8+zmF+VfW+7QPg85m2FA7KAjRChUrtA3Kkjyzr+Ai+ON4S6CerVZL QZVYmlNpGI7aPclV26EOpvcj6sl9Z9cCaZY/Wljj89RLBHKDgAw= =TsO1 -----END PGP SIGNATURE----- Sun May 12 02:11:16 UTC 2024 I: Checking whether the package is not for us Sun May 12 02:11:16 UTC 2024 I: Starting 1st build on remote node virt64c-armhf-rb.debian.net. Sun May 12 02:11:16 UTC 2024 I: Preparing to do remote build '1' on virt64c-armhf-rb.debian.net. Sun May 12 02:13:00 UTC 2024 I: Deleting $TMPDIR on virt64c-armhf-rb.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Sat May 11 14:11:23 -12 2024 I: pbuilder-time-stamp: 1715479883 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [sleepd_2.11.dsc] I: copying [./sleepd_2.11.tar.xz] I: Extracting source gpgv: Signature made Fri May 29 21:34:30 2020 gpgv: using RSA key 9236557B170C87F8821C0AC3C1E0D92E986F7C7E gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./sleepd_2.11.dsc: no acceptable signature found dpkg-source: info: extracting sleepd in sleepd-2.11 dpkg-source: info: unpacking sleepd_2.11.tar.xz I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/8328/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='armhf' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=3 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='armhf' IFS=' ' INVOCATION_ID='d6c0cd4081c146058beaf4f75eb7df86' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='8328' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.et5BxuHg/pbuilderrc_vq80 --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.et5BxuHg/b1 --logfile b1/build.log sleepd_2.11.dsc' SUDO_GID='113' SUDO_UID='107' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://10.0.0.15:3142/' I: uname -a Linux virt64c 6.1.0-21-arm64 #1 SMP Debian 6.1.90-1 (2024-05-03) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 May 10 18:08 /bin -> usr/bin I: user script /srv/workspace/pbuilder/8328/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: armhf Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), dpkg-dev (>= 1.9.0), libupower-glib-dev dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19446 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libupower-glib-dev; however: Package libupower-glib-dev is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} gir1.2-glib-2.0{a} gir1.2-upowerglib-1.0{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libblkid-dev{a} libdebhelper-perl{a} libelf1t64{a} libexpat1{a} libffi-dev{a} libfile-stripnondeterminism-perl{a} libgirepository-2.0-0{a} libglib2.0-0t64{a} libglib2.0-bin{a} libglib2.0-data{a} libglib2.0-dev{a} libglib2.0-dev-bin{a} libicu72{a} libmagic-mgc{a} libmagic1t64{a} libmount-dev{a} libpcre2-16-0{a} libpcre2-32-0{a} libpcre2-dev{a} libpcre2-posix3{a} libpipeline1{a} libpkgconf3{a} libpython3-stdlib{a} libpython3.11-minimal{a} libpython3.11-stdlib{a} libreadline8t64{a} libselinux1-dev{a} libsepol-dev{a} libsub-override-perl{a} libsysprof-capture-4-dev{a} libtool{a} libuchardet0{a} libupower-glib-dev{a} libupower-glib3{a} libxml2{a} m4{a} man-db{a} media-types{a} netbase{a} pkgconf{a} pkgconf-bin{a} po-debconf{a} python3{a} python3-minimal{a} python3-packaging{a} python3.11{a} python3.11-minimal{a} readline-common{a} sensible-utils{a} tzdata{a} uuid-dev{a} zlib1g-dev{a} The following packages are RECOMMENDED but will NOT be installed: ca-certificates curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx shared-mime-info upower wget xdg-user-dirs 0 packages upgraded, 69 newly installed, 0 to remove and 0 not upgraded. Need to get 31.6 MB of archives. After unpacking 121 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main armhf libpython3.11-minimal armhf 3.11.9-1 [805 kB] Get: 2 http://deb.debian.org/debian trixie/main armhf libexpat1 armhf 2.6.2-1 [83.5 kB] Get: 3 http://deb.debian.org/debian trixie/main armhf python3.11-minimal armhf 3.11.9-1 [1600 kB] Get: 4 http://deb.debian.org/debian trixie/main armhf python3-minimal armhf 3.11.8-1 [26.3 kB] Get: 5 http://deb.debian.org/debian trixie/main armhf media-types all 10.1.0 [26.9 kB] Get: 6 http://deb.debian.org/debian trixie/main armhf netbase all 6.4 [12.8 kB] Get: 7 http://deb.debian.org/debian trixie/main armhf tzdata all 2024a-4 [255 kB] Get: 8 http://deb.debian.org/debian trixie/main armhf readline-common all 8.2-4 [69.3 kB] Get: 9 http://deb.debian.org/debian trixie/main armhf libreadline8t64 armhf 8.2-4 [145 kB] Get: 10 http://deb.debian.org/debian trixie/main armhf libpython3.11-stdlib armhf 3.11.9-1 [1704 kB] Get: 11 http://deb.debian.org/debian trixie/main armhf python3.11 armhf 3.11.9-1 [602 kB] Get: 12 http://deb.debian.org/debian trixie/main armhf libpython3-stdlib armhf 3.11.8-1 [9332 B] Get: 13 http://deb.debian.org/debian trixie/main armhf python3 armhf 3.11.8-1 [27.4 kB] Get: 14 http://deb.debian.org/debian trixie/main armhf sensible-utils all 0.0.22 [22.4 kB] Get: 15 http://deb.debian.org/debian trixie/main armhf libmagic-mgc armhf 1:5.45-3 [314 kB] Get: 16 http://deb.debian.org/debian trixie/main armhf libmagic1t64 armhf 1:5.45-3 [98.1 kB] Get: 17 http://deb.debian.org/debian trixie/main armhf file armhf 1:5.45-3 [42.0 kB] Get: 18 http://deb.debian.org/debian trixie/main armhf gettext-base armhf 0.21-14+b1 [157 kB] Get: 19 http://deb.debian.org/debian trixie/main armhf libuchardet0 armhf 0.0.8-1+b1 [65.7 kB] Get: 20 http://deb.debian.org/debian trixie/main armhf groff-base armhf 1.23.0-4 [1090 kB] Get: 21 http://deb.debian.org/debian trixie/main armhf bsdextrautils armhf 2.40-8 [85.6 kB] Get: 22 http://deb.debian.org/debian trixie/main armhf libpipeline1 armhf 1.5.7-2 [33.3 kB] Get: 23 http://deb.debian.org/debian trixie/main armhf man-db armhf 2.12.1-1 [1375 kB] Get: 24 http://deb.debian.org/debian trixie/main armhf m4 armhf 1.4.19-4 [264 kB] Get: 25 http://deb.debian.org/debian trixie/main armhf autoconf all 2.71-3 [332 kB] Get: 26 http://deb.debian.org/debian trixie/main armhf autotools-dev all 20220109.1 [51.6 kB] Get: 27 http://deb.debian.org/debian trixie/main armhf automake all 1:1.16.5-1.3 [823 kB] Get: 28 http://deb.debian.org/debian trixie/main armhf autopoint all 0.21-14 [496 kB] Get: 29 http://deb.debian.org/debian trixie/main armhf libdebhelper-perl all 13.15.3 [88.0 kB] Get: 30 http://deb.debian.org/debian trixie/main armhf libtool all 2.4.7-7 [517 kB] Get: 31 http://deb.debian.org/debian trixie/main armhf dh-autoreconf all 20 [17.1 kB] Get: 32 http://deb.debian.org/debian trixie/main armhf libarchive-zip-perl all 1.68-1 [104 kB] Get: 33 http://deb.debian.org/debian trixie/main armhf libsub-override-perl all 0.10-1 [10.6 kB] Get: 34 http://deb.debian.org/debian trixie/main armhf libfile-stripnondeterminism-perl all 1.13.1-1 [19.4 kB] Get: 35 http://deb.debian.org/debian trixie/main armhf dh-strip-nondeterminism all 1.13.1-1 [8620 B] Get: 36 http://deb.debian.org/debian trixie/main armhf libelf1t64 armhf 0.191-1+b1 [183 kB] Get: 37 http://deb.debian.org/debian trixie/main armhf dwz armhf 0.15-1+b2 [106 kB] Get: 38 http://deb.debian.org/debian trixie/main armhf libicu72 armhf 72.1-4+b1 [9070 kB] Get: 39 http://deb.debian.org/debian trixie/main armhf libxml2 armhf 2.9.14+dfsg-1.3+b3 [598 kB] Get: 40 http://deb.debian.org/debian trixie/main armhf gettext armhf 0.21-14+b1 [1230 kB] Get: 41 http://deb.debian.org/debian trixie/main armhf intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 42 http://deb.debian.org/debian trixie/main armhf po-debconf all 1.0.21+nmu1 [248 kB] Get: 43 http://deb.debian.org/debian trixie/main armhf debhelper all 13.15.3 [901 kB] Get: 44 http://deb.debian.org/debian trixie/main armhf libglib2.0-0t64 armhf 2.80.1-1 [1314 kB] Get: 45 http://deb.debian.org/debian trixie/main armhf gir1.2-glib-2.0 armhf 2.80.1-1 [190 kB] Get: 46 http://deb.debian.org/debian trixie/main armhf libupower-glib3 armhf 1.90.3-1 [32.0 kB] Get: 47 http://deb.debian.org/debian trixie/main armhf gir1.2-upowerglib-1.0 armhf 1.90.3-1 [8244 B] Get: 48 http://deb.debian.org/debian trixie/main armhf uuid-dev armhf 2.40-8 [42.5 kB] Get: 49 http://deb.debian.org/debian trixie/main armhf libblkid-dev armhf 2.40-8 [190 kB] Get: 50 http://deb.debian.org/debian trixie/main armhf libffi-dev armhf 3.4.6-1 [55.9 kB] Get: 51 http://deb.debian.org/debian trixie/main armhf libgirepository-2.0-0 armhf 2.80.1-1 [122 kB] Get: 52 http://deb.debian.org/debian trixie/main armhf libglib2.0-data all 2.80.1-1 [1266 kB] Get: 53 http://deb.debian.org/debian trixie/main armhf libglib2.0-bin armhf 2.80.1-1 [116 kB] Get: 54 http://deb.debian.org/debian trixie/main armhf python3-packaging all 24.0-1 [45.5 kB] Get: 55 http://deb.debian.org/debian trixie/main armhf libglib2.0-dev-bin armhf 2.80.1-1 [167 kB] Get: 56 http://deb.debian.org/debian trixie/main armhf libsepol-dev armhf 3.5-2+b1 [320 kB] Get: 57 http://deb.debian.org/debian trixie/main armhf libpcre2-16-0 armhf 10.42-4+b1 [212 kB] Get: 58 http://deb.debian.org/debian trixie/main armhf libpcre2-32-0 armhf 10.42-4+b1 [203 kB] Get: 59 http://deb.debian.org/debian trixie/main armhf libpcre2-posix3 armhf 10.42-4+b1 [55.3 kB] Get: 60 http://deb.debian.org/debian trixie/main armhf libpcre2-dev armhf 10.42-4+b1 [668 kB] Get: 61 http://deb.debian.org/debian trixie/main armhf libselinux1-dev armhf 3.5-2+b2 [152 kB] Get: 62 http://deb.debian.org/debian trixie/main armhf libmount-dev armhf 2.40-8 [25.9 kB] Get: 63 http://deb.debian.org/debian trixie/main armhf libsysprof-capture-4-dev armhf 46.0-1 [44.8 kB] Get: 64 http://deb.debian.org/debian trixie/main armhf libpkgconf3 armhf 1.8.1-1+b2 [31.9 kB] Get: 65 http://deb.debian.org/debian trixie/main armhf pkgconf-bin armhf 1.8.1-1+b2 [28.9 kB] Get: 66 http://deb.debian.org/debian trixie/main armhf pkgconf armhf 1.8.1-1+b2 [26.2 kB] Get: 67 http://deb.debian.org/debian trixie/main armhf zlib1g-dev armhf 1:1.3.dfsg-3.1 [904 kB] Get: 68 http://deb.debian.org/debian trixie/main armhf libglib2.0-dev armhf 2.80.1-1 [1616 kB] Get: 69 http://deb.debian.org/debian trixie/main armhf libupower-glib-dev armhf 1.90.3-1 [16.0 kB] Fetched 31.6 MB in 1s (24.2 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package libpython3.11-minimal:armhf. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19446 files and directories currently installed.) Preparing to unpack .../libpython3.11-minimal_3.11.9-1_armhf.deb ... Unpacking libpython3.11-minimal:armhf (3.11.9-1) ... Selecting previously unselected package libexpat1:armhf. Preparing to unpack .../libexpat1_2.6.2-1_armhf.deb ... Unpacking libexpat1:armhf (2.6.2-1) ... Selecting previously unselected package python3.11-minimal. Preparing to unpack .../python3.11-minimal_3.11.9-1_armhf.deb ... Unpacking python3.11-minimal (3.11.9-1) ... Setting up libpython3.11-minimal:armhf (3.11.9-1) ... Setting up libexpat1:armhf (2.6.2-1) ... Setting up python3.11-minimal (3.11.9-1) ... Selecting previously unselected package python3-minimal. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19762 files and directories currently installed.) Preparing to unpack .../0-python3-minimal_3.11.8-1_armhf.deb ... Unpacking python3-minimal (3.11.8-1) ... Selecting previously unselected package media-types. Preparing to unpack .../1-media-types_10.1.0_all.deb ... Unpacking media-types (10.1.0) ... Selecting previously unselected package netbase. Preparing to unpack .../2-netbase_6.4_all.deb ... Unpacking netbase (6.4) ... Selecting previously unselected package tzdata. Preparing to unpack .../3-tzdata_2024a-4_all.deb ... Unpacking tzdata (2024a-4) ... Selecting previously unselected package readline-common. Preparing to unpack .../4-readline-common_8.2-4_all.deb ... Unpacking readline-common (8.2-4) ... Selecting previously unselected package libreadline8t64:armhf. Preparing to unpack .../5-libreadline8t64_8.2-4_armhf.deb ... Adding 'diversion of /lib/arm-linux-gnueabihf/libhistory.so.8 to /lib/arm-linux-gnueabihf/libhistory.so.8.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/arm-linux-gnueabihf/libhistory.so.8.2 to /lib/arm-linux-gnueabihf/libhistory.so.8.2.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/arm-linux-gnueabihf/libreadline.so.8 to /lib/arm-linux-gnueabihf/libreadline.so.8.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/arm-linux-gnueabihf/libreadline.so.8.2 to /lib/arm-linux-gnueabihf/libreadline.so.8.2.usr-is-merged by libreadline8t64' Unpacking libreadline8t64:armhf (8.2-4) ... Selecting previously unselected package libpython3.11-stdlib:armhf. Preparing to unpack .../6-libpython3.11-stdlib_3.11.9-1_armhf.deb ... Unpacking libpython3.11-stdlib:armhf (3.11.9-1) ... Selecting previously unselected package python3.11. Preparing to unpack .../7-python3.11_3.11.9-1_armhf.deb ... Unpacking python3.11 (3.11.9-1) ... Selecting previously unselected package libpython3-stdlib:armhf. Preparing to unpack .../8-libpython3-stdlib_3.11.8-1_armhf.deb ... Unpacking libpython3-stdlib:armhf (3.11.8-1) ... Setting up python3-minimal (3.11.8-1) ... Selecting previously unselected package python3. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20754 files and directories currently installed.) Preparing to unpack .../00-python3_3.11.8-1_armhf.deb ... Unpacking python3 (3.11.8-1) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../01-sensible-utils_0.0.22_all.deb ... Unpacking sensible-utils (0.0.22) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../02-libmagic-mgc_1%3a5.45-3_armhf.deb ... Unpacking libmagic-mgc (1:5.45-3) ... Selecting previously unselected package libmagic1t64:armhf. Preparing to unpack .../03-libmagic1t64_1%3a5.45-3_armhf.deb ... Unpacking libmagic1t64:armhf (1:5.45-3) ... Selecting previously unselected package file. Preparing to unpack .../04-file_1%3a5.45-3_armhf.deb ... Unpacking file (1:5.45-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../05-gettext-base_0.21-14+b1_armhf.deb ... Unpacking gettext-base (0.21-14+b1) ... Selecting previously unselected package libuchardet0:armhf. Preparing to unpack .../06-libuchardet0_0.0.8-1+b1_armhf.deb ... Unpacking libuchardet0:armhf (0.0.8-1+b1) ... Selecting previously unselected package groff-base. Preparing to unpack .../07-groff-base_1.23.0-4_armhf.deb ... Unpacking groff-base (1.23.0-4) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../08-bsdextrautils_2.40-8_armhf.deb ... Unpacking bsdextrautils (2.40-8) ... Selecting previously unselected package libpipeline1:armhf. Preparing to unpack .../09-libpipeline1_1.5.7-2_armhf.deb ... Unpacking libpipeline1:armhf (1.5.7-2) ... Selecting previously unselected package man-db. Preparing to unpack .../10-man-db_2.12.1-1_armhf.deb ... Unpacking man-db (2.12.1-1) ... Selecting previously unselected package m4. Preparing to unpack .../11-m4_1.4.19-4_armhf.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../12-autoconf_2.71-3_all.deb ... Unpacking autoconf (2.71-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../13-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../14-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../15-autopoint_0.21-14_all.deb ... Unpacking autopoint (0.21-14) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../16-libdebhelper-perl_13.15.3_all.deb ... Unpacking libdebhelper-perl (13.15.3) ... Selecting previously unselected package libtool. Preparing to unpack .../17-libtool_2.4.7-7_all.deb ... Unpacking libtool (2.4.7-7) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../18-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../19-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libsub-override-perl. Preparing to unpack .../20-libsub-override-perl_0.10-1_all.deb ... Unpacking libsub-override-perl (0.10-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../21-libfile-stripnondeterminism-perl_1.13.1-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.13.1-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../22-dh-strip-nondeterminism_1.13.1-1_all.deb ... Unpacking dh-strip-nondeterminism (1.13.1-1) ... Selecting previously unselected package libelf1t64:armhf. Preparing to unpack .../23-libelf1t64_0.191-1+b1_armhf.deb ... Unpacking libelf1t64:armhf (0.191-1+b1) ... Selecting previously unselected package dwz. Preparing to unpack .../24-dwz_0.15-1+b2_armhf.deb ... Unpacking dwz (0.15-1+b2) ... Selecting previously unselected package libicu72:armhf. Preparing to unpack .../25-libicu72_72.1-4+b1_armhf.deb ... Unpacking libicu72:armhf (72.1-4+b1) ... Selecting previously unselected package libxml2:armhf. Preparing to unpack .../26-libxml2_2.9.14+dfsg-1.3+b3_armhf.deb ... Unpacking libxml2:armhf (2.9.14+dfsg-1.3+b3) ... Selecting previously unselected package gettext. Preparing to unpack .../27-gettext_0.21-14+b1_armhf.deb ... Unpacking gettext (0.21-14+b1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../28-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../29-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../30-debhelper_13.15.3_all.deb ... Unpacking debhelper (13.15.3) ... Selecting previously unselected package libglib2.0-0t64:armhf. Preparing to unpack .../31-libglib2.0-0t64_2.80.1-1_armhf.deb ... Unpacking libglib2.0-0t64:armhf (2.80.1-1) ... Selecting previously unselected package gir1.2-glib-2.0:armhf. Preparing to unpack .../32-gir1.2-glib-2.0_2.80.1-1_armhf.deb ... Unpacking gir1.2-glib-2.0:armhf (2.80.1-1) ... Selecting previously unselected package libupower-glib3:armhf. Preparing to unpack .../33-libupower-glib3_1.90.3-1_armhf.deb ... Unpacking libupower-glib3:armhf (1.90.3-1) ... Selecting previously unselected package gir1.2-upowerglib-1.0:armhf. Preparing to unpack .../34-gir1.2-upowerglib-1.0_1.90.3-1_armhf.deb ... Unpacking gir1.2-upowerglib-1.0:armhf (1.90.3-1) ... Selecting previously unselected package uuid-dev:armhf. Preparing to unpack .../35-uuid-dev_2.40-8_armhf.deb ... Unpacking uuid-dev:armhf (2.40-8) ... Selecting previously unselected package libblkid-dev:armhf. Preparing to unpack .../36-libblkid-dev_2.40-8_armhf.deb ... Unpacking libblkid-dev:armhf (2.40-8) ... Selecting previously unselected package libffi-dev:armhf. Preparing to unpack .../37-libffi-dev_3.4.6-1_armhf.deb ... Unpacking libffi-dev:armhf (3.4.6-1) ... Selecting previously unselected package libgirepository-2.0-0:armhf. Preparing to unpack .../38-libgirepository-2.0-0_2.80.1-1_armhf.deb ... Unpacking libgirepository-2.0-0:armhf (2.80.1-1) ... Selecting previously unselected package libglib2.0-data. Preparing to unpack .../39-libglib2.0-data_2.80.1-1_all.deb ... Unpacking libglib2.0-data (2.80.1-1) ... Selecting previously unselected package libglib2.0-bin. Preparing to unpack .../40-libglib2.0-bin_2.80.1-1_armhf.deb ... Unpacking libglib2.0-bin (2.80.1-1) ... Selecting previously unselected package python3-packaging. Preparing to unpack .../41-python3-packaging_24.0-1_all.deb ... Unpacking python3-packaging (24.0-1) ... Selecting previously unselected package libglib2.0-dev-bin. Preparing to unpack .../42-libglib2.0-dev-bin_2.80.1-1_armhf.deb ... Unpacking libglib2.0-dev-bin (2.80.1-1) ... Selecting previously unselected package libsepol-dev:armhf. Preparing to unpack .../43-libsepol-dev_3.5-2+b1_armhf.deb ... Unpacking libsepol-dev:armhf (3.5-2+b1) ... Selecting previously unselected package libpcre2-16-0:armhf. Preparing to unpack .../44-libpcre2-16-0_10.42-4+b1_armhf.deb ... Unpacking libpcre2-16-0:armhf (10.42-4+b1) ... Selecting previously unselected package libpcre2-32-0:armhf. Preparing to unpack .../45-libpcre2-32-0_10.42-4+b1_armhf.deb ... Unpacking libpcre2-32-0:armhf (10.42-4+b1) ... Selecting previously unselected package libpcre2-posix3:armhf. Preparing to unpack .../46-libpcre2-posix3_10.42-4+b1_armhf.deb ... Unpacking libpcre2-posix3:armhf (10.42-4+b1) ... Selecting previously unselected package libpcre2-dev:armhf. Preparing to unpack .../47-libpcre2-dev_10.42-4+b1_armhf.deb ... Unpacking libpcre2-dev:armhf (10.42-4+b1) ... Selecting previously unselected package libselinux1-dev:armhf. Preparing to unpack .../48-libselinux1-dev_3.5-2+b2_armhf.deb ... Unpacking libselinux1-dev:armhf (3.5-2+b2) ... Selecting previously unselected package libmount-dev:armhf. Preparing to unpack .../49-libmount-dev_2.40-8_armhf.deb ... Unpacking libmount-dev:armhf (2.40-8) ... Selecting previously unselected package libsysprof-capture-4-dev:armhf. Preparing to unpack .../50-libsysprof-capture-4-dev_46.0-1_armhf.deb ... Unpacking libsysprof-capture-4-dev:armhf (46.0-1) ... Selecting previously unselected package libpkgconf3:armhf. Preparing to unpack .../51-libpkgconf3_1.8.1-1+b2_armhf.deb ... Unpacking libpkgconf3:armhf (1.8.1-1+b2) ... Selecting previously unselected package pkgconf-bin. Preparing to unpack .../52-pkgconf-bin_1.8.1-1+b2_armhf.deb ... Unpacking pkgconf-bin (1.8.1-1+b2) ... Selecting previously unselected package pkgconf:armhf. Preparing to unpack .../53-pkgconf_1.8.1-1+b2_armhf.deb ... Unpacking pkgconf:armhf (1.8.1-1+b2) ... Selecting previously unselected package zlib1g-dev:armhf. Preparing to unpack .../54-zlib1g-dev_1%3a1.3.dfsg-3.1_armhf.deb ... Unpacking zlib1g-dev:armhf (1:1.3.dfsg-3.1) ... Selecting previously unselected package libglib2.0-dev:armhf. Preparing to unpack .../55-libglib2.0-dev_2.80.1-1_armhf.deb ... Unpacking libglib2.0-dev:armhf (2.80.1-1) ... Selecting previously unselected package libupower-glib-dev:armhf. Preparing to unpack .../56-libupower-glib-dev_1.90.3-1_armhf.deb ... Unpacking libupower-glib-dev:armhf (1.90.3-1) ... Setting up media-types (10.1.0) ... Setting up libpipeline1:armhf (1.5.7-2) ... Setting up libicu72:armhf (72.1-4+b1) ... Setting up bsdextrautils (2.40-8) ... Setting up libmagic-mgc (1:5.45-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.15.3) ... Setting up libmagic1t64:armhf (1:5.45-3) ... Setting up gettext-base (0.21-14+b1) ... Setting up m4 (1.4.19-4) ... Setting up file (1:5.45-3) ... Setting up libffi-dev:armhf (3.4.6-1) ... Setting up libpcre2-16-0:armhf (10.42-4+b1) ... Setting up libelf1t64:armhf (0.191-1+b1) ... Setting up tzdata (2024a-4) ... Current default time zone: 'Etc/UTC' Local time is now: Sun May 12 02:12:20 UTC 2024. Universal Time is now: Sun May 12 02:12:20 UTC 2024. Run 'dpkg-reconfigure tzdata' if you wish to change it. Setting up libsysprof-capture-4-dev:armhf (46.0-1) ... Setting up autotools-dev (20220109.1) ... Setting up libpcre2-32-0:armhf (10.42-4+b1) ... Setting up libglib2.0-0t64:armhf (2.80.1-1) ... No schema files found: doing nothing. Setting up libglib2.0-data (2.80.1-1) ... Setting up libpkgconf3:armhf (1.8.1-1+b2) ... Setting up uuid-dev:armhf (2.40-8) ... Setting up autopoint (0.21-14) ... Setting up libsepol-dev:armhf (3.5-2+b1) ... Setting up pkgconf-bin (1.8.1-1+b2) ... Setting up gir1.2-glib-2.0:armhf (2.80.1-1) ... Setting up autoconf (2.71-3) ... Setting up zlib1g-dev:armhf (1:1.3.dfsg-3.1) ... Setting up libpcre2-posix3:armhf (10.42-4+b1) ... Setting up dwz (0.15-1+b2) ... Setting up sensible-utils (0.0.22) ... Setting up libuchardet0:armhf (0.0.8-1+b1) ... Setting up libupower-glib3:armhf (1.90.3-1) ... Setting up libsub-override-perl (0.10-1) ... Setting up netbase (6.4) ... Setting up readline-common (8.2-4) ... Setting up libxml2:armhf (2.9.14+dfsg-1.3+b3) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.13.1-1) ... Setting up libblkid-dev:armhf (2.40-8) ... Setting up gettext (0.21-14+b1) ... Setting up libpcre2-dev:armhf (10.42-4+b1) ... Setting up libtool (2.4.7-7) ... Setting up libgirepository-2.0-0:armhf (2.80.1-1) ... Setting up libselinux1-dev:armhf (3.5-2+b2) ... Setting up libglib2.0-bin (2.80.1-1) ... Setting up pkgconf:armhf (1.8.1-1+b2) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up libreadline8t64:armhf (8.2-4) ... Setting up dh-strip-nondeterminism (1.13.1-1) ... Setting up groff-base (1.23.0-4) ... Setting up gir1.2-upowerglib-1.0:armhf (1.90.3-1) ... Setting up libmount-dev:armhf (2.40-8) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up libpython3.11-stdlib:armhf (3.11.9-1) ... Setting up man-db (2.12.1-1) ... Not building database; man-db/auto-update is not 'true'. Setting up libpython3-stdlib:armhf (3.11.8-1) ... Setting up python3.11 (3.11.9-1) ... Setting up debhelper (13.15.3) ... Setting up python3 (3.11.8-1) ... Setting up python3-packaging (24.0-1) ... Setting up libglib2.0-dev-bin (2.80.1-1) ... Setting up libglib2.0-dev:armhf (2.80.1-1) ... Setting up libupower-glib-dev:armhf (1.90.3-1) ... Processing triggers for libc-bin (2.38-10) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.33-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/reproducible-path/sleepd-2.11/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../sleepd_2.11_source.changes dpkg-buildpackage: info: source package sleepd dpkg-buildpackage: info: source version 2.11 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Sudip Mukherjee dpkg-source --before-build . dpkg-buildpackage: info: host architecture armhf fakeroot debian/rules clean dh clean dh_auto_clean make -j3 clean make[1]: Entering directory '/build/reproducible-path/sleepd-2.11' rm -f sleepd sleepctl *.o make[1]: Leaving directory '/build/reproducible-path/sleepd-2.11' dh_clean debian/rules build dh build dh_update_autotools_config dh_autoreconf dh_auto_configure debian/rules override_dh_auto_build make[1]: Entering directory '/build/reproducible-path/sleepd-2.11' dh_auto_build -- USE_UPOWER=1 make -j3 "INSTALL=install --strip-program=true" USE_UPOWER=1 make[2]: Entering directory '/build/reproducible-path/sleepd-2.11' cc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/sleepd-2.11=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -DACPI_APM -pthread -DUPOWER -DACPI_APM -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -c -o sleepd.o sleepd.c cc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/sleepd-2.11=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -DACPI_APM -pthread -DUPOWER -DACPI_APM -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -c -o acpi.o acpi.c cc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/sleepd-2.11=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -DACPI_APM -pthread -DUPOWER -DACPI_APM -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -c -o eventmonitor.o eventmonitor.c sleepd.c: In function 'writecontrol': sleepd.c:281:9: warning: ignoring return value of 'write' declared with attribute 'warn_unused_result' [-Wunused-result] 281 | write(f, buf, strlen(buf)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from sleepd.c:35: sleepd.c: In function 'parse_command_line': sleepd.h:7:16: warning: '__builtin___sprintf_chk' may write a terminating nul past the end of the destination [-Wformat-overflow=] 7 | #define TXFILE "/sys/class/net/%s/statistics/tx_packets" | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ sleepd.c:215:54: note: in expansion of macro 'TXFILE' 215 | sprintf(tx_statfile, TXFILE, tmpdev); | ^~~~~~ sleepd.h:7:56: note: format string is defined here 7 | #define TXFILE "/sys/class/net/%s/statistics/tx_packets" | ^ In file included from /usr/include/stdio.h:964, from sleepd.c:18: In function 'sprintf', inlined from 'parse_command_line' at sleepd.c:215:5: /usr/include/arm-linux-gnueabihf/bits/stdio2.h:30:10: note: '__builtin___sprintf_chk' output between 38 and 45 bytes into a destination of size 44 30 | return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 31 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 32 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ sleepd.c: In function 'parse_command_line': sleepd.h:9:16: warning: '__builtin___sprintf_chk' may write a terminating nul past the end of the destination [-Wformat-overflow=] 9 | #define RXFILE "/sys/class/net/%s/statistics/rx_packets" | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ sleepd.c:216:54: note: in expansion of macro 'RXFILE' 216 | sprintf(rx_statfile, RXFILE, tmpdev); | ^~~~~~ sleepd.h:9:56: note: format string is defined here 9 | #define RXFILE "/sys/class/net/%s/statistics/rx_packets" | ^ In function 'sprintf', inlined from 'parse_command_line' at sleepd.c:216:5: /usr/include/arm-linux-gnueabihf/bits/stdio2.h:30:10: note: '__builtin___sprintf_chk' output between 38 and 45 bytes into a destination of size 44 30 | return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 31 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 32 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ cc -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/sleepd-2.11=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -DACPI_APM -pthread -DUPOWER -DACPI_APM -I/usr/include/libupower-glib -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -I/usr/include/sysprof-6 -pthread -c upower.c -o upower.o acpi.c: In function 'find_items': acpi.c:21:20: warning: '%s' directive output may be truncated writing up to 255 bytes into a region of size 104 [-Wformat-truncation=] 21 | #define SYSFS_PATH "/sys/class/power_supply" | ^~~~~~~~~~~~~~~~~~~~~~~~~ acpi.c:194:54: note: in expansion of macro 'SYSFS_PATH' 194 | snprintf(filename, sizeof(filename), SYSFS_PATH "/%s/type", ent->d_name); | ^~~~~~~~~~ acpi.c:218:79: note: format string is defined here 218 | snprintf(statusarray[i], sizeof(statusarray[i]), SYSFS_PATH "/%s/%s", devices[i], | ^~ In file included from /usr/include/stdio.h:964, from acpi.c:7: In function 'snprintf', inlined from 'find_items' at acpi.c:194:3: /usr/include/arm-linux-gnueabihf/bits/stdio2.h:54:10: note: '__builtin___snprintf_chk' output between 30 and 285 bytes into a destination of size 128 54 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 55 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 56 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ cc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/sleepd-2.11=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -DACPI_APM -pthread -DUPOWER -DACPI_APM -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -Wl,-z,relro sleepctl.c -o sleepctl upower.c: In function 'upower_supported': upower.c:65:17: warning: 'up_client_get_devices' is deprecated: Use 'up_client_get_devices2' instead [-Wdeprecated-declarations] 65 | GPtrArray *devices = up_client_get_devices(up); | ^~~~~~~~~ In file included from /usr/include/libupower-glib/upower.h:38, from upower.c:9: /usr/include/libupower-glib/up-client.h:87:18: note: declared here 87 | GPtrArray *up_client_get_devices (UpClient *client) G_DEPRECATED_FOR(up_client_get_devices2); | ^~~~~~~~~~~~~~~~~~~~~ upower.c: In function 'upower_read': upower.c:93:9: warning: 'up_client_get_devices' is deprecated: Use 'up_client_get_devices2' instead [-Wdeprecated-declarations] 93 | devices = up_client_get_devices(up); | ^~~~~~~ /usr/include/libupower-glib/up-client.h:87:18: note: declared here 87 | GPtrArray *up_client_get_devices (UpClient *client) G_DEPRECATED_FOR(up_client_get_devices2); | ^~~~~~~~~~~~~~~~~~~~~ sleepctl.c: In function 'write_control': sleepctl.c:68:9: warning: ignoring return value of 'write' declared with attribute 'warn_unused_result' [-Wunused-result] 68 | write(f, buf, strlen(buf)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~ cc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/sleepd-2.11=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -DACPI_APM -pthread -DUPOWER -DACPI_APM -Wl,-z,relro -o sleepd sleepd.o acpi.o eventmonitor.o upower.o -lpthread -lupower-glib -lgobject-2.0 -lglib-2.0 make[2]: Leaving directory '/build/reproducible-path/sleepd-2.11' make[1]: Leaving directory '/build/reproducible-path/sleepd-2.11' dh_auto_test create-stamp debian/debhelper-build-stamp fakeroot debian/rules binary dh binary dh_testroot dh_prep debian/rules override_dh_auto_install make[1]: Entering directory '/build/reproducible-path/sleepd-2.11' /usr/bin/make install PREFIX=debian/sleepd make[2]: Entering directory '/build/reproducible-path/sleepd-2.11' install -d debian/sleepd/usr/sbin/ debian/sleepd/usr/share/man/man8/ \ debian/sleepd/usr/bin/ debian/sleepd/usr/share/man/man1/ install -s sleepd debian/sleepd/usr/sbin/ install -m 0644 sleepd.8 debian/sleepd/usr/share/man/man8/ install -s -m 4755 -o root -g root sleepctl debian/sleepd/usr/bin/ install -m 0644 sleepctl.1 debian/sleepd/usr/share/man/man1/ make[2]: Leaving directory '/build/reproducible-path/sleepd-2.11' make[1]: Leaving directory '/build/reproducible-path/sleepd-2.11' dh_installdocs dh_installchangelogs dh_installman dh_installinit dh_perl dh_link dh_strip_nondeterminism dh_compress debian/rules override_dh_fixperms make[1]: Entering directory '/build/reproducible-path/sleepd-2.11' dh_fixperms -X sleepctl make[1]: Leaving directory '/build/reproducible-path/sleepd-2.11' dh_missing dh_dwz -a dwz: debian/sleepd/usr/bin/sleepctl: .debug_info section not present dwz: debian/sleepd/usr/sbin/sleepd: .debug_info section not present dwz: Too few files for multifile optimization dh_dwz: warning: No dwz multifile created, but not explicitly requested either so ignoring it. dh_dwz: warning: Common issues include no debug information at all (missing -g) and dh_dwz: warning: compressed debug information (#931891). dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'sleepd' in '../sleepd_2.11_armhf.deb'. dpkg-genbuildinfo --build=binary -O../sleepd_2.11_armhf.buildinfo dpkg-genchanges --build=binary -O../sleepd_2.11_armhf.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: including full source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/8328 and its subdirectories I: Current time: Sat May 11 14:12:55 -12 2024 I: pbuilder-time-stamp: 1715479975 Sun May 12 02:13:03 UTC 2024 I: 1st build successful. Starting 2nd build on remote node ff4a-armhf-rb.debian.net. Sun May 12 02:13:03 UTC 2024 I: Preparing to do remote build '2' on ff4a-armhf-rb.debian.net. Sun May 12 02:15:01 UTC 2024 I: Deleting $TMPDIR on ff4a-armhf-rb.debian.net. Sun May 12 02:15:03 UTC 2024 I: sleepd_2.11_armhf.changes: Format: 1.8 Date: Fri, 29 May 2020 18:24:44 +0100 Source: sleepd Binary: sleepd Architecture: armhf Version: 2.11 Distribution: unstable Urgency: medium Maintainer: Debian QA Group Changed-By: Sudip Mukherjee Description: sleepd - puts an inactive or low battery laptop to sleep Closes: 957810 Changes: sleepd (2.11) unstable; urgency=medium . * QA upload. . [ Jelmer Vernooij ] * Trim trailing whitespace. * Use secure copyright file specification URI. . [ Ondřej Nový ] * d/control: Add Vcs-* field . [ Debian Janitor ] * Use secure URI in Homepage field. * Explicitly specify source format. * Bump debhelper from old 9 to 12. . [ Sudip Mukherjee ] * Update Standards-Version to 4.5.0 * Add Pre-Depends. * Update compat level to 13. * Use canonical URI with Vcs-Git. * Fix FTBFS with gcc-10. (Closes: #957810) Checksums-Sha1: 6b3634096e93f4fa01d0b2b0a9df281357665639 5918 sleepd_2.11_armhf.buildinfo 77dd6549b72b61cf693ab9284b8aba473bbedd66 18224 sleepd_2.11_armhf.deb Checksums-Sha256: e55ebe0d9d002b04e6bc219caae20881da79f4dbaf201ba33c1203e6f87caee7 5918 sleepd_2.11_armhf.buildinfo 0d68e6aed2799fd4ed9bc05bbd63cc1241f69416c4d373971f550e963032c569 18224 sleepd_2.11_armhf.deb Files: 2ee00421914c584660506f2ca345607d 5918 admin optional sleepd_2.11_armhf.buildinfo 1823121780cb7d1b4df570332cb37a82 18224 admin optional sleepd_2.11_armhf.deb Sun May 12 02:15:04 UTC 2024 I: diffoscope 266 will be used to compare the two builds: Running as unit: rb-diffoscope-armhf_31-4886.service # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.et5BxuHg/sleepd_2.11.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.et5BxuHg/sleepd_2.11.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.et5BxuHg/sleepd_2.11.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.et5BxuHg/b1/sleepd_2.11_armhf.changes /srv/reproducible-results/rbuild-debian/r-b-build.et5BxuHg/b2/sleepd_2.11_armhf.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.376s) 0.376s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.016s) 0.016s 12 calls diffoscope.comparators.binary.FilesystemFile ## specialize (total time: 0.000s) 0.000s 1 call specialize Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 753ms CPU time consumed: 753ms Sun May 12 02:31:34 UTC 2024 I: diffoscope 266 found no differences in the changes files, and a .buildinfo file also exists. Sun May 12 02:31:34 UTC 2024 I: sleepd from trixie built successfully and reproducibly on armhf. Sun May 12 02:31:39 UTC 2024 I: Submitting .buildinfo files to external archives: Sun May 12 02:31:39 UTC 2024 I: Submitting 8.0K b1/sleepd_2.11_armhf.buildinfo.asc Sun May 12 02:31:50 UTC 2024 I: Submitting 8.0K b2/sleepd_2.11_armhf.buildinfo.asc Sun May 12 02:32:10 UTC 2024 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Sun May 12 02:32:10 UTC 2024 I: Done submitting .buildinfo files. Sun May 12 02:32:10 UTC 2024 I: Removing signed sleepd_2.11_armhf.buildinfo.asc files: removed './b1/sleepd_2.11_armhf.buildinfo.asc' removed './b2/sleepd_2.11_armhf.buildinfo.asc'