Tue May 7 22:44:39 UTC 2024 I: starting to build slcurl/trixie/armhf on jenkins on '2024-05-07 22:44' Tue May 7 22:44:39 UTC 2024 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/armhf_3/4824/console.log Tue May 7 22:44:39 UTC 2024 I: Downloading source for trixie/slcurl=0.2.2~pre.12-2 --2024-05-07 22:44:40-- http://deb.debian.org/debian/pool/main/s/slcurl/slcurl_0.2.2%7epre.12-2.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2059 (2.0K) [text/prs.lines.tag] Saving to: ‘slcurl_0.2.2~pre.12-2.dsc’ 0K .. 100% 237M=0s 2024-05-07 22:44:40 (237 MB/s) - ‘slcurl_0.2.2~pre.12-2.dsc’ saved [2059/2059] Tue May 7 22:44:40 UTC 2024 I: slcurl_0.2.2~pre.12-2.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Format: 3.0 (quilt) Source: slcurl Binary: slang-curl Architecture: any Version: 0.2.2~pre.12-2 Maintainer: Rafael Laboissière Homepage: https://jedsoft.org/slang/modules/curl.html Standards-Version: 4.6.1 Vcs-Browser: https://salsa.debian.org/debian/slcurl Vcs-Git: https://salsa.debian.org/debian/slcurl.git Build-Depends: debhelper-compat (= 13), libslang2-dev, libcurl4-gnutls-dev Package-List: slang-curl deb interpreters optional arch=any Checksums-Sha1: 8d8783a25311c85828e33d3414f687fdd73e159a 125464 slcurl_0.2.2~pre.12.orig.tar.gz 176f4b95e3b37ac5fbc4d98cab7a3c9496598a9d 4784 slcurl_0.2.2~pre.12-2.debian.tar.xz Checksums-Sha256: 757e410a0c79c95840495b73a5d1ffd56743924b24f8c0b0a3a956c231fa699c 125464 slcurl_0.2.2~pre.12.orig.tar.gz 8464089461946d3b1fa3bcd41a99e4f3f312475337f153ed4881604dab1af5fa 4784 slcurl_0.2.2~pre.12-2.debian.tar.xz Files: 96c4f6bb2edc89074b3811946fe7afbf 125464 slcurl_0.2.2~pre.12.orig.tar.gz 0860966ce47486b8ac9d4d61daacfb73 4784 slcurl_0.2.2~pre.12-2.debian.tar.xz Dgit: 160a4932d7c700c3a6dc9d5a786c2e169a87abf2 debian archive/debian/0.2.2_pre.12-2 https://git.dgit.debian.org/slcurl -----BEGIN PGP SIGNATURE----- iQJGBAEBCAAwFiEEP0ZDkUmP6HS9tdmPISSqGYN4XJAFAmOOEYoSHHJhZmFlbEBk ZWJpYW4ub3JnAAoJECEkqhmDeFyQ9DMP/Anp5oJqEno9iFWmtyA/tkwa+6SHbbwk NY2qgZ2sOu0p7Ay6dt5BAQ8JD13/kpKOKXGWYE7kcHMfqXVkpiAJSq4XNx6ckYQN QoIG1rsu9/jTtuROnMay7QQQvvYvYmP9xd1l4HXNbHSD5MJs8FpXqAnnQxPZqRKD gC4UxPc4jE/WROSNSt4aAcMmGXlDJ/roUV8KzHsrAFhIK7okBkZnAqi1rHOThGNw riXICpTl8W9ZMHt4VXUSC1iAykg+3aFTsjrx6iA8WT06GwLEqprPdMFtdceu0cAn rDSIvlza65Yp9dWJ+io49jShISfgW+3J6Yq997i54BixqCZrMgBSYURFy+YKolAC g6EUfhASvTDaxeCNuv7o+/YzX+g9sC2l0n+jcFXQSMtWWRJGQnRoMKCGsA2w5mrP Zu26y2EoPGVF1iGbaLK0czlhS4B7AV2izt+o/hn4nEhMl6vgL0hxEQSHbOMJAlVr qBdh8m0CgQru0Y4a7M2vc5RKpWaz6LkLjjuEKkEmaQj/6I6UEi00Xr4mt+0aMinM +aqCl8FLd8SdLs4sHdgZF5xysZluW8aUoklARw4JqNnFX0lwXVIRsXsFtBl3Mbx1 vivMqppJCwSZDKPTR/LQf0Btvs2KiSvhctWsuyA2oJKir6g3lwEbUpwrIjXDsfw6 NYA5OEA9I/w4 =rCCc -----END PGP SIGNATURE----- Tue May 7 22:44:40 UTC 2024 I: Checking whether the package is not for us Tue May 7 22:44:40 UTC 2024 I: Starting 1st build on remote node ff4a-armhf-rb.debian.net. Tue May 7 22:44:40 UTC 2024 I: Preparing to do remote build '1' on ff4a-armhf-rb.debian.net. Tue May 7 22:46:11 UTC 2024 I: Deleting $TMPDIR on ff4a-armhf-rb.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Tue May 7 10:44:47 -12 2024 I: pbuilder-time-stamp: 1715121887 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [slcurl_0.2.2~pre.12-2.dsc] I: copying [./slcurl_0.2.2~pre.12.orig.tar.gz] I: copying [./slcurl_0.2.2~pre.12-2.debian.tar.xz] I: Extracting source gpgv: Signature made Mon Dec 5 15:43:06 2022 gpgv: using RSA key 3F464391498FE874BDB5D98F2124AA1983785C90 gpgv: issuer "rafael@debian.org" gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./slcurl_0.2.2~pre.12-2.dsc: no acceptable signature found dpkg-source: info: extracting slcurl in slcurl-0.2.2~pre.12 dpkg-source: info: unpacking slcurl_0.2.2~pre.12.orig.tar.gz dpkg-source: info: unpacking slcurl_0.2.2~pre.12-2.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying update-configure.patch I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/21658/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='armhf' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=3 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='armhf' IFS=' ' INVOCATION_ID='fc635ba9f8b641f490e9fc1371fa8638' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='21658' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.mE4EnGyC/pbuilderrc_kOrH --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.mE4EnGyC/b1 --logfile b1/build.log slcurl_0.2.2~pre.12-2.dsc' SUDO_GID='113' SUDO_UID='107' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://10.0.0.15:3142/' I: uname -a Linux ff4a 6.1.0-21-armmp-lpae #1 SMP Debian 6.1.90-1 (2024-05-03) armv7l GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 May 5 11:24 /bin -> usr/bin I: user script /srv/workspace/pbuilder/21658/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: armhf Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), libslang2-dev, libcurl4-gnutls-dev dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19444 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libslang2-dev; however: Package libslang2-dev is not installed. pbuilder-satisfydepends-dummy depends on libcurl4-gnutls-dev; however: Package libcurl4-gnutls-dev is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libbrotli1{a} libcom-err2{a} libcurl3t64-gnutls{a} libcurl4-gnutls-dev{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libgssapi-krb5-2{a} libicu72{a} libk5crypto3{a} libkeyutils1{a} libkrb5-3{a} libkrb5support0{a} libmagic-mgc{a} libmagic1t64{a} libnghttp2-14{a} libpipeline1{a} libpng-dev{a} libpng16-16t64{a} libpsl5t64{a} librtmp1{a} libslang2{a} libslang2-dev{a} libssh2-1t64{a} libsub-override-perl{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} zlib1g-dev{a} The following packages are RECOMMENDED but will NOT be installed: ca-certificates curl krb5-locales libarchive-cpio-perl libltdl-dev libmail-sendmail-perl libpng-tools lynx publicsuffix wget 0 packages upgraded, 48 newly installed, 0 to remove and 0 not upgraded. Need to get 23.1 MB of archives. After unpacking 80.3 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main armhf sensible-utils all 0.0.22 [22.4 kB] Get: 2 http://deb.debian.org/debian trixie/main armhf libmagic-mgc armhf 1:5.45-3 [314 kB] Get: 3 http://deb.debian.org/debian trixie/main armhf libmagic1t64 armhf 1:5.45-3 [98.1 kB] Get: 4 http://deb.debian.org/debian trixie/main armhf file armhf 1:5.45-3 [42.0 kB] Get: 5 http://deb.debian.org/debian trixie/main armhf gettext-base armhf 0.21-14+b1 [157 kB] Get: 6 http://deb.debian.org/debian trixie/main armhf libuchardet0 armhf 0.0.8-1+b1 [65.7 kB] Get: 7 http://deb.debian.org/debian trixie/main armhf groff-base armhf 1.23.0-4 [1090 kB] Get: 8 http://deb.debian.org/debian trixie/main armhf bsdextrautils armhf 2.40-8 [85.6 kB] Get: 9 http://deb.debian.org/debian trixie/main armhf libpipeline1 armhf 1.5.7-2 [33.3 kB] Get: 10 http://deb.debian.org/debian trixie/main armhf man-db armhf 2.12.1-1 [1375 kB] Get: 11 http://deb.debian.org/debian trixie/main armhf m4 armhf 1.4.19-4 [264 kB] Get: 12 http://deb.debian.org/debian trixie/main armhf autoconf all 2.71-3 [332 kB] Get: 13 http://deb.debian.org/debian trixie/main armhf autotools-dev all 20220109.1 [51.6 kB] Get: 14 http://deb.debian.org/debian trixie/main armhf automake all 1:1.16.5-1.3 [823 kB] Get: 15 http://deb.debian.org/debian trixie/main armhf autopoint all 0.21-14 [496 kB] Get: 16 http://deb.debian.org/debian trixie/main armhf libdebhelper-perl all 13.15.3 [88.0 kB] Get: 17 http://deb.debian.org/debian trixie/main armhf libtool all 2.4.7-7 [517 kB] Get: 18 http://deb.debian.org/debian trixie/main armhf dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian trixie/main armhf libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian trixie/main armhf libsub-override-perl all 0.10-1 [10.6 kB] Get: 21 http://deb.debian.org/debian trixie/main armhf libfile-stripnondeterminism-perl all 1.13.1-1 [19.4 kB] Get: 22 http://deb.debian.org/debian trixie/main armhf dh-strip-nondeterminism all 1.13.1-1 [8620 B] Get: 23 http://deb.debian.org/debian trixie/main armhf libelf1t64 armhf 0.191-1+b1 [183 kB] Get: 24 http://deb.debian.org/debian trixie/main armhf dwz armhf 0.15-1+b2 [106 kB] Get: 25 http://deb.debian.org/debian trixie/main armhf libicu72 armhf 72.1-4+b1 [9070 kB] Get: 26 http://deb.debian.org/debian trixie/main armhf libxml2 armhf 2.9.14+dfsg-1.3+b3 [598 kB] Get: 27 http://deb.debian.org/debian trixie/main armhf gettext armhf 0.21-14+b1 [1230 kB] Get: 28 http://deb.debian.org/debian trixie/main armhf intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 29 http://deb.debian.org/debian trixie/main armhf po-debconf all 1.0.21+nmu1 [248 kB] Get: 30 http://deb.debian.org/debian trixie/main armhf debhelper all 13.15.3 [901 kB] Get: 31 http://deb.debian.org/debian trixie/main armhf libbrotli1 armhf 1.1.0-2+b3 [284 kB] Get: 32 http://deb.debian.org/debian trixie/main armhf libcom-err2 armhf 1.47.1~rc2-1 [21.8 kB] Get: 33 http://deb.debian.org/debian trixie/main armhf libkrb5support0 armhf 1.20.1-6+b1 [30.6 kB] Get: 34 http://deb.debian.org/debian trixie/main armhf libk5crypto3 armhf 1.20.1-6+b1 [75.5 kB] Get: 35 http://deb.debian.org/debian trixie/main armhf libkeyutils1 armhf 1.6.3-3 [7908 B] Get: 36 http://deb.debian.org/debian trixie/main armhf libkrb5-3 armhf 1.20.1-6+b1 [290 kB] Get: 37 http://deb.debian.org/debian trixie/main armhf libgssapi-krb5-2 armhf 1.20.1-6+b1 [112 kB] Get: 38 http://deb.debian.org/debian trixie/main armhf libnghttp2-14 armhf 1.61.0-1+b1 [64.1 kB] Get: 39 http://deb.debian.org/debian trixie/main armhf libpsl5t64 armhf 0.21.2-1.1 [55.6 kB] Get: 40 http://deb.debian.org/debian trixie/main armhf librtmp1 armhf 2.4+20151223.gitfa8646d.1-2+b4 [53.2 kB] Get: 41 http://deb.debian.org/debian trixie/main armhf libssh2-1t64 armhf 1.11.0-4.1+b2 [198 kB] Get: 42 http://deb.debian.org/debian trixie/main armhf libcurl3t64-gnutls armhf 8.7.1-3 [384 kB] Get: 43 http://deb.debian.org/debian trixie/main armhf libcurl4-gnutls-dev armhf 8.7.1-3 [497 kB] Get: 44 http://deb.debian.org/debian trixie/main armhf libpng16-16t64 armhf 1.6.43-5 [262 kB] Get: 45 http://deb.debian.org/debian trixie/main armhf zlib1g-dev armhf 1:1.3.dfsg-3.1 [904 kB] Get: 46 http://deb.debian.org/debian trixie/main armhf libpng-dev armhf 1.6.43-5 [344 kB] Get: 47 http://deb.debian.org/debian trixie/main armhf libslang2 armhf 2.3.3-4 [513 kB] Get: 48 http://deb.debian.org/debian trixie/main armhf libslang2-dev armhf 2.3.3-4 [660 kB] Fetched 23.1 MB in 2s (14.4 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19444 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.22_all.deb ... Unpacking sensible-utils (0.0.22) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3_armhf.deb ... Unpacking libmagic-mgc (1:5.45-3) ... Selecting previously unselected package libmagic1t64:armhf. Preparing to unpack .../02-libmagic1t64_1%3a5.45-3_armhf.deb ... Unpacking libmagic1t64:armhf (1:5.45-3) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-3_armhf.deb ... Unpacking file (1:5.45-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.21-14+b1_armhf.deb ... Unpacking gettext-base (0.21-14+b1) ... Selecting previously unselected package libuchardet0:armhf. Preparing to unpack .../05-libuchardet0_0.0.8-1+b1_armhf.deb ... Unpacking libuchardet0:armhf (0.0.8-1+b1) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-4_armhf.deb ... Unpacking groff-base (1.23.0-4) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.40-8_armhf.deb ... Unpacking bsdextrautils (2.40-8) ... Selecting previously unselected package libpipeline1:armhf. Preparing to unpack .../08-libpipeline1_1.5.7-2_armhf.deb ... Unpacking libpipeline1:armhf (1.5.7-2) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.12.1-1_armhf.deb ... Unpacking man-db (2.12.1-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-4_armhf.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.71-3_all.deb ... Unpacking autoconf (2.71-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.21-14_all.deb ... Unpacking autopoint (0.21-14) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.15.3_all.deb ... Unpacking libdebhelper-perl (13.15.3) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.4.7-7_all.deb ... Unpacking libtool (2.4.7-7) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libsub-override-perl. Preparing to unpack .../19-libsub-override-perl_0.10-1_all.deb ... Unpacking libsub-override-perl (0.10-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../20-libfile-stripnondeterminism-perl_1.13.1-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.13.1-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../21-dh-strip-nondeterminism_1.13.1-1_all.deb ... Unpacking dh-strip-nondeterminism (1.13.1-1) ... Selecting previously unselected package libelf1t64:armhf. Preparing to unpack .../22-libelf1t64_0.191-1+b1_armhf.deb ... Unpacking libelf1t64:armhf (0.191-1+b1) ... Selecting previously unselected package dwz. Preparing to unpack .../23-dwz_0.15-1+b2_armhf.deb ... Unpacking dwz (0.15-1+b2) ... Selecting previously unselected package libicu72:armhf. Preparing to unpack .../24-libicu72_72.1-4+b1_armhf.deb ... Unpacking libicu72:armhf (72.1-4+b1) ... Selecting previously unselected package libxml2:armhf. Preparing to unpack .../25-libxml2_2.9.14+dfsg-1.3+b3_armhf.deb ... Unpacking libxml2:armhf (2.9.14+dfsg-1.3+b3) ... Selecting previously unselected package gettext. Preparing to unpack .../26-gettext_0.21-14+b1_armhf.deb ... Unpacking gettext (0.21-14+b1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../27-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../28-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../29-debhelper_13.15.3_all.deb ... Unpacking debhelper (13.15.3) ... Selecting previously unselected package libbrotli1:armhf. Preparing to unpack .../30-libbrotli1_1.1.0-2+b3_armhf.deb ... Unpacking libbrotli1:armhf (1.1.0-2+b3) ... Selecting previously unselected package libcom-err2:armhf. Preparing to unpack .../31-libcom-err2_1.47.1~rc2-1_armhf.deb ... Unpacking libcom-err2:armhf (1.47.1~rc2-1) ... Selecting previously unselected package libkrb5support0:armhf. Preparing to unpack .../32-libkrb5support0_1.20.1-6+b1_armhf.deb ... Unpacking libkrb5support0:armhf (1.20.1-6+b1) ... Selecting previously unselected package libk5crypto3:armhf. Preparing to unpack .../33-libk5crypto3_1.20.1-6+b1_armhf.deb ... Unpacking libk5crypto3:armhf (1.20.1-6+b1) ... Selecting previously unselected package libkeyutils1:armhf. Preparing to unpack .../34-libkeyutils1_1.6.3-3_armhf.deb ... Unpacking libkeyutils1:armhf (1.6.3-3) ... Selecting previously unselected package libkrb5-3:armhf. Preparing to unpack .../35-libkrb5-3_1.20.1-6+b1_armhf.deb ... Unpacking libkrb5-3:armhf (1.20.1-6+b1) ... Selecting previously unselected package libgssapi-krb5-2:armhf. Preparing to unpack .../36-libgssapi-krb5-2_1.20.1-6+b1_armhf.deb ... Unpacking libgssapi-krb5-2:armhf (1.20.1-6+b1) ... Selecting previously unselected package libnghttp2-14:armhf. Preparing to unpack .../37-libnghttp2-14_1.61.0-1+b1_armhf.deb ... Unpacking libnghttp2-14:armhf (1.61.0-1+b1) ... Selecting previously unselected package libpsl5t64:armhf. Preparing to unpack .../38-libpsl5t64_0.21.2-1.1_armhf.deb ... Unpacking libpsl5t64:armhf (0.21.2-1.1) ... Selecting previously unselected package librtmp1:armhf. Preparing to unpack .../39-librtmp1_2.4+20151223.gitfa8646d.1-2+b4_armhf.deb ... Unpacking librtmp1:armhf (2.4+20151223.gitfa8646d.1-2+b4) ... Selecting previously unselected package libssh2-1t64:armhf. Preparing to unpack .../40-libssh2-1t64_1.11.0-4.1+b2_armhf.deb ... Unpacking libssh2-1t64:armhf (1.11.0-4.1+b2) ... Selecting previously unselected package libcurl3t64-gnutls:armhf. Preparing to unpack .../41-libcurl3t64-gnutls_8.7.1-3_armhf.deb ... Unpacking libcurl3t64-gnutls:armhf (8.7.1-3) ... Selecting previously unselected package libcurl4-gnutls-dev:armhf. Preparing to unpack .../42-libcurl4-gnutls-dev_8.7.1-3_armhf.deb ... Unpacking libcurl4-gnutls-dev:armhf (8.7.1-3) ... Selecting previously unselected package libpng16-16t64:armhf. Preparing to unpack .../43-libpng16-16t64_1.6.43-5_armhf.deb ... Unpacking libpng16-16t64:armhf (1.6.43-5) ... Selecting previously unselected package zlib1g-dev:armhf. Preparing to unpack .../44-zlib1g-dev_1%3a1.3.dfsg-3.1_armhf.deb ... Unpacking zlib1g-dev:armhf (1:1.3.dfsg-3.1) ... Selecting previously unselected package libpng-dev:armhf. Preparing to unpack .../45-libpng-dev_1.6.43-5_armhf.deb ... Unpacking libpng-dev:armhf (1.6.43-5) ... Selecting previously unselected package libslang2:armhf. Preparing to unpack .../46-libslang2_2.3.3-4_armhf.deb ... Unpacking libslang2:armhf (2.3.3-4) ... Selecting previously unselected package libslang2-dev:armhf. Preparing to unpack .../47-libslang2-dev_2.3.3-4_armhf.deb ... Unpacking libslang2-dev:armhf (2.3.3-4) ... Setting up libpipeline1:armhf (1.5.7-2) ... Setting up libkeyutils1:armhf (1.6.3-3) ... Setting up libicu72:armhf (72.1-4+b1) ... Setting up bsdextrautils (2.40-8) ... Setting up libmagic-mgc (1:5.45-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.15.3) ... Setting up libbrotli1:armhf (1.1.0-2+b3) ... Setting up libmagic1t64:armhf (1:5.45-3) ... Setting up libpsl5t64:armhf (0.21.2-1.1) ... Setting up libnghttp2-14:armhf (1.61.0-1+b1) ... Setting up gettext-base (0.21-14+b1) ... Setting up m4 (1.4.19-4) ... Setting up libcom-err2:armhf (1.47.1~rc2-1) ... Setting up file (1:5.45-3) ... Setting up libelf1t64:armhf (0.191-1+b1) ... Setting up libkrb5support0:armhf (1.20.1-6+b1) ... Setting up autotools-dev (20220109.1) ... Setting up libslang2:armhf (2.3.3-4) ... Setting up librtmp1:armhf (2.4+20151223.gitfa8646d.1-2+b4) ... Setting up libpng16-16t64:armhf (1.6.43-5) ... Setting up autopoint (0.21-14) ... Setting up libk5crypto3:armhf (1.20.1-6+b1) ... Setting up autoconf (2.71-3) ... Setting up zlib1g-dev:armhf (1:1.3.dfsg-3.1) ... Setting up dwz (0.15-1+b2) ... Setting up sensible-utils (0.0.22) ... Setting up libuchardet0:armhf (0.0.8-1+b1) ... Setting up libsub-override-perl (0.10-1) ... Setting up libkrb5-3:armhf (1.20.1-6+b1) ... Setting up libssh2-1t64:armhf (1.11.0-4.1+b2) ... Setting up libxml2:armhf (2.9.14+dfsg-1.3+b3) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.13.1-1) ... Setting up gettext (0.21-14+b1) ... Setting up libtool (2.4.7-7) ... Setting up libpng-dev:armhf (1.6.43-5) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up libgssapi-krb5-2:armhf (1.20.1-6+b1) ... Setting up dh-strip-nondeterminism (1.13.1-1) ... Setting up groff-base (1.23.0-4) ... Setting up libslang2-dev:armhf (2.3.3-4) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up libcurl3t64-gnutls:armhf (8.7.1-3) ... Setting up libcurl4-gnutls-dev:armhf (8.7.1-3) ... Setting up man-db (2.12.1-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.15.3) ... Processing triggers for libc-bin (2.38-7) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/reproducible-path/slcurl-0.2.2~pre.12/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../slcurl_0.2.2~pre.12-2_source.changes dpkg-buildpackage: info: source package slcurl dpkg-buildpackage: info: source version 0.2.2~pre.12-2 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Rafael Laboissière dpkg-source --before-build . dpkg-buildpackage: info: host architecture armhf dpkg-source: info: using options from slcurl-0.2.2~pre.12/debian/source/options: --extend-diff-ignore=^configure$ debian/rules clean dh clean --no-parallel dh_autoreconf_clean -O--no-parallel dh_clean -O--no-parallel debian/rules binary dh binary --no-parallel dh_update_autotools_config -O--no-parallel cp: warning: behavior of -n is non-portable and may change in future; use --update=none instead cp: warning: behavior of -n is non-portable and may change in future; use --update=none instead dh_autoreconf -O--no-parallel configure.ac:13: warning: The macro `AC_AIX' is obsolete. configure.ac:13: You should run autoupdate. ./lib/autoconf/specific.m4:540: AC_AIX is expanded from... aclocal.m4:537: JD_ANSI_CC is expanded from... configure.ac:13: the top level configure.ac:13: warning: The macro `AC_ISC_POSIX' is obsolete. configure.ac:13: You should run autoupdate. ./lib/autoconf/specific.m4:550: AC_ISC_POSIX is expanded from... aclocal.m4:537: JD_ANSI_CC is expanded from... configure.ac:13: the top level debian/rules execute_after_dh_autoreconf make[1]: Entering directory '/build/reproducible-path/slcurl-0.2.2~pre.12' mv autoconf/configure . make[1]: Leaving directory '/build/reproducible-path/slcurl-0.2.2~pre.12' debian/rules override_dh_auto_configure make[1]: Entering directory '/build/reproducible-path/slcurl-0.2.2~pre.12' dh_auto_configure -- --with-curlinc=/usr/include/arm-linux-gnueabihf \ --with-curllib=/usr/lib/arm-linux-gnueabihf ./configure --build=arm-linux-gnueabihf --prefix=/usr --includedir=\${prefix}/include --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info --sysconfdir=/etc --localstatedir=/var --disable-option-checking --disable-silent-rules --libdir=\${prefix}/lib/arm-linux-gnueabihf --runstatedir=/run --disable-maintainer-mode --disable-dependency-tracking --with-curlinc=/usr/include/arm-linux-gnueabihf --with-curllib=/usr/lib/arm-linux-gnueabihf checking build system type... arm-unknown-linux-gnueabihf checking host system type... arm-unknown-linux-gnueabihf checking for ranlib... ranlib checking for a BSD-compatible install... /usr/bin/install -c checking whether make sets $(MAKE)... yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether gcc accepts -g... yes checking for gcc option to enable C11 features... none needed checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for wchar.h... yes checking for minix/config.h... no checking whether it is safe to define __EXTENSIONS__... yes checking whether _XOPEN_SOURCE should be defined... no checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking whether gcc needs -traditional... no checking for library containing strerror... none required checking C compiler that understands ANSI prototypes... gcc looks ok. Good. checking for dlfcn.h... yes checking for dlopen in -ldl... yes checking for X... no checking for the slang library and header files ... yes: /usr/lib/arm-linux-gnueabihf and /usr/include checking for the curl library and header files curl/curl.h... yes: /usr/lib/arm-linux-gnueabihf and /usr/include/arm-linux-gnueabihf checking SLANG_VERSION in /usr/include/slang.h... 2.3.3 checking for stdlib.h... (cached) yes checking for unistd.h... (cached) yes checking size of short... 2 checking size of int... 4 checking size of long... 4 checking size of float... 4 checking size of double... 8 configure: creating ./config.status config.status: creating Makefile config.status: creating src/Makefile config.status: creating src/config.h You are compiling with the following compiler configuration: CC = gcc CC_SHARED = $(CC) -shared -fPIC $(CFLAGS) $(CPPFLAGS) CFLAGS = -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/slcurl-0.2.2~pre.12=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security LDFLAGS = -Wl,-z,relro -Wl,-export-dynamic The modules will be installed in ${prefix}/lib/arm-linux-gnueabihf/slang/v2/modules. Any associated .sl files will be install in ${datarootdir}/slsh/local-packages If any of these quantities are incorrect, edit src/Makefile accordingly. make[1]: Leaving directory '/build/reproducible-path/slcurl-0.2.2~pre.12' debian/rules override_dh_auto_build make[1]: Entering directory '/build/reproducible-path/slcurl-0.2.2~pre.12' dh_auto_build -- RPATH= make -j1 RPATH= make[2]: Entering directory '/build/reproducible-path/slcurl-0.2.2~pre.12' cd src; make all make[3]: Entering directory '/build/reproducible-path/slcurl-0.2.2~pre.12/src' cc -shared -fPIC -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/slcurl-0.2.2~pre.12=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -I/usr/include/arm-linux-gnueabihf -Wl,-z,relro curl-module.c -o curl-module.so -lslang -L/usr/lib/arm-linux-gnueabihf -lcurl -lm curl-module.c: In function 'do_setopt': curl-module.c:568:7: warning: 'CURLOPT_IOCTLFUNCTION' is deprecated: since 7.18.0. Use CURLOPT_SEEKFUNCTION [-Wdeprecated-declarations] 568 | case CURLOPT_IOCTLFUNCTION: | ^~~~ In file included from curl-module.c:28: /usr/include/arm-linux-gnueabihf/curl/curl.h:1576:3: note: declared here 1576 | CURLOPTDEPRECATED(CURLOPT_IOCTLFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 130, | ^~~~~~~~~~~~~~~~~ curl-module.c:571:7: warning: 'CURLOPT_PROGRESSFUNCTION' is deprecated: since 7.32.0. Use CURLOPT_XFERINFOFUNCTION [-Wdeprecated-declarations] 571 | case CURLOPT_PROGRESSFUNCTION: | ^~~~ /usr/include/arm-linux-gnueabihf/curl/curl.h:1291:3: note: declared here 1291 | CURLOPTDEPRECATED(CURLOPT_PROGRESSFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 56, | ^~~~~~~~~~~~~~~~~ curl-module.c:587:7: warning: 'CURLOPT_IOCTLDATA' is deprecated: since 7.18.0. Use CURLOPT_SEEKDATA [-Wdeprecated-declarations] 587 | case CURLOPT_IOCTLDATA: | ^~~~ /usr/include/arm-linux-gnueabihf/curl/curl.h:1578:3: note: declared here 1578 | CURLOPTDEPRECATED(CURLOPT_IOCTLDATA, CURLOPTTYPE_CBPOINT, 131, | ^~~~~~~~~~~~~~~~~ curl-module.c:620:7: warning: 'CURLOPT_DNS_USE_GLOBAL_CACHE' is deprecated: since 7.11.1. Use CURLOPT_SHARE [-Wdeprecated-declarations] 620 | case CURLOPT_DNS_USE_GLOBAL_CACHE: /* obsolete and not encouraged */ | ^~~~ /usr/include/arm-linux-gnueabihf/curl/curl.h:1420:3: note: declared here 1420 | CURLOPTDEPRECATED(CURLOPT_DNS_USE_GLOBAL_CACHE, CURLOPTTYPE_LONG, 91, | ^~~~~~~~~~~~~~~~~ curl-module.c:663:7: warning: 'CURLOPT_PUT' is deprecated: since 7.12.1. Use CURLOPT_UPLOAD [-Wdeprecated-declarations] 663 | case CURLOPT_PUT: /* deprecated */ | ^~~~ /usr/include/arm-linux-gnueabihf/curl/curl.h:1282:3: note: declared here 1282 | CURLOPTDEPRECATED(CURLOPT_PUT, CURLOPTTYPE_LONG, 54, | ^~~~~~~~~~~~~~~~~ curl-module.c:674:7: warning: 'CURLOPT_HTTPPOST' is deprecated: since 7.56.0. Use CURLOPT_MIMEPOST [-Wdeprecated-declarations] 674 | case CURLOPT_HTTPPOST: /* FIXME: linked list */ | ^~~~ /usr/include/arm-linux-gnueabihf/curl/curl.h:1191:3: note: declared here 1191 | CURLOPTDEPRECATED(CURLOPT_HTTPPOST, CURLOPTTYPE_OBJECTPOINT, 24, | ^~~~~~~~~~~~~~~~~ curl-module.c:836:7: warning: 'CURLOPT_RANDOM_FILE' is deprecated: since 7.84.0. Serves no purpose anymore [-Wdeprecated-declarations] 836 | case CURLOPT_RANDOM_FILE: | ^~~~ /usr/include/arm-linux-gnueabihf/curl/curl.h:1360:3: note: declared here 1360 | CURLOPTDEPRECATED(CURLOPT_RANDOM_FILE, CURLOPTTYPE_STRINGPOINT, 76, | ^~~~~~~~~~~~~~~~~ curl-module.c:837:7: warning: 'CURLOPT_EGDSOCKET' is deprecated: since 7.84.0. Serves no purpose anymore [-Wdeprecated-declarations] 837 | case CURLOPT_EGDSOCKET: | ^~~~ /usr/include/arm-linux-gnueabihf/curl/curl.h:1364:3: note: declared here 1364 | CURLOPTDEPRECATED(CURLOPT_EGDSOCKET, CURLOPTTYPE_STRINGPOINT, 77, | ^~~~~~~~~~~~~~~~~ curl-module.c: In function 'get_info_intrin': curl-module.c:1088:7: warning: 'CURLINFO_SIZE_UPLOAD' is deprecated: since 7.55.0. Use CURLINFO_SIZE_UPLOAD_T [-Wdeprecated-declarations] 1088 | case CURLINFO_SIZE_UPLOAD: | ^~~~ /usr/include/arm-linux-gnueabihf/curl/curl.h:2859:3: note: declared here 2859 | CURLINFO_SIZE_UPLOAD CURL_DEPRECATED(7.55.0, "Use CURLINFO_SIZE_UPLOAD_T") | ^~~~~~~~~~~~~~~~~~~~ curl-module.c:1089:7: warning: 'CURLINFO_SIZE_DOWNLOAD' is deprecated: since 7.55.0. Use CURLINFO_SIZE_DOWNLOAD_T [-Wdeprecated-declarations] 1089 | case CURLINFO_SIZE_DOWNLOAD: | ^~~~ /usr/include/arm-linux-gnueabihf/curl/curl.h:2862:3: note: declared here 2862 | CURLINFO_SIZE_DOWNLOAD | ^~~~~~~~~~~~~~~~~~~~~~ curl-module.c:1090:7: warning: 'CURLINFO_SPEED_DOWNLOAD' is deprecated: since 7.55.0. Use CURLINFO_SPEED_DOWNLOAD_T [-Wdeprecated-declarations] 1090 | case CURLINFO_SPEED_DOWNLOAD: | ^~~~ /usr/include/arm-linux-gnueabihf/curl/curl.h:2866:3: note: declared here 2866 | CURLINFO_SPEED_DOWNLOAD | ^~~~~~~~~~~~~~~~~~~~~~~ curl-module.c:1091:7: warning: 'CURLINFO_SPEED_UPLOAD' is deprecated: since 7.55.0. Use CURLINFO_SPEED_UPLOAD_T [-Wdeprecated-declarations] 1091 | case CURLINFO_SPEED_UPLOAD: | ^~~~ /usr/include/arm-linux-gnueabihf/curl/curl.h:2870:3: note: declared here 2870 | CURLINFO_SPEED_UPLOAD | ^~~~~~~~~~~~~~~~~~~~~ curl-module.c:1092:7: warning: 'CURLINFO_CONTENT_LENGTH_DOWNLOAD' is deprecated: since 7.55.0. Use CURLINFO_CONTENT_LENGTH_DOWNLOAD_T [-Wdeprecated-declarations] 1092 | case CURLINFO_CONTENT_LENGTH_DOWNLOAD: | ^~~~ /usr/include/arm-linux-gnueabihf/curl/curl.h:2879:3: note: declared here 2879 | CURLINFO_CONTENT_LENGTH_DOWNLOAD | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ curl-module.c:1093:7: warning: 'CURLINFO_CONTENT_LENGTH_UPLOAD' is deprecated: since 7.55.0. Use CURLINFO_CONTENT_LENGTH_UPLOAD_T [-Wdeprecated-declarations] 1093 | case CURLINFO_CONTENT_LENGTH_UPLOAD: | ^~~~ /usr/include/arm-linux-gnueabihf/curl/curl.h:2884:3: note: declared here 2884 | CURLINFO_CONTENT_LENGTH_UPLOAD | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ curl-module.c: At top level: curl-module.c:1643:4: warning: 'CURLOPT_IOCTLFUNCTION' is deprecated: since 7.18.0. Use CURLOPT_SEEKFUNCTION [-Wdeprecated-declarations] 1643 | MAKE_ICONSTANT("CURLOPT_IOCTLFUNCTION", CURLOPT_IOCTLFUNCTION), | ^~~~~~~~~~~~~~ /usr/include/arm-linux-gnueabihf/curl/curl.h:1576:3: note: declared here 1576 | CURLOPTDEPRECATED(CURLOPT_IOCTLFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 130, | ^~~~~~~~~~~~~~~~~ curl-module.c:1644:4: warning: 'CURLOPT_PROGRESSFUNCTION' is deprecated: since 7.32.0. Use CURLOPT_XFERINFOFUNCTION [-Wdeprecated-declarations] 1644 | MAKE_ICONSTANT("CURLOPT_PROGRESSFUNCTION", CURLOPT_PROGRESSFUNCTION), | ^~~~~~~~~~~~~~ /usr/include/arm-linux-gnueabihf/curl/curl.h:1291:3: note: declared here 1291 | CURLOPTDEPRECATED(CURLOPT_PROGRESSFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 56, | ^~~~~~~~~~~~~~~~~ curl-module.c:1650:4: warning: 'CURLOPT_IOCTLDATA' is deprecated: since 7.18.0. Use CURLOPT_SEEKDATA [-Wdeprecated-declarations] 1650 | MAKE_ICONSTANT("CURLOPT_IOCTLDATA", CURLOPT_IOCTLDATA), | ^~~~~~~~~~~~~~ /usr/include/arm-linux-gnueabihf/curl/curl.h:1578:3: note: declared here 1578 | CURLOPTDEPRECATED(CURLOPT_IOCTLDATA, CURLOPTTYPE_CBPOINT, 131, | ^~~~~~~~~~~~~~~~~ curl-module.c:1665:4: warning: 'CURLOPT_DNS_USE_GLOBAL_CACHE' is deprecated: since 7.11.1. Use CURLOPT_SHARE [-Wdeprecated-declarations] 1665 | MAKE_ICONSTANT("CURLOPT_DNS_USE_GLOBAL_CACHE", CURLOPT_DNS_USE_GLOBAL_CACHE), | ^~~~~~~~~~~~~~ /usr/include/arm-linux-gnueabihf/curl/curl.h:1420:3: note: declared here 1420 | CURLOPTDEPRECATED(CURLOPT_DNS_USE_GLOBAL_CACHE, CURLOPTTYPE_LONG, 91, | ^~~~~~~~~~~~~~~~~ curl-module.c:1683:4: warning: 'CURLOPT_PUT' is deprecated: since 7.12.1. Use CURLOPT_UPLOAD [-Wdeprecated-declarations] 1683 | MAKE_ICONSTANT("CURLOPT_PUT", CURLOPT_PUT), | ^~~~~~~~~~~~~~ /usr/include/arm-linux-gnueabihf/curl/curl.h:1282:3: note: declared here 1282 | CURLOPTDEPRECATED(CURLOPT_PUT, CURLOPTTYPE_LONG, 54, | ^~~~~~~~~~~~~~~~~ curl-module.c:1688:4: warning: 'CURLOPT_HTTPPOST' is deprecated: since 7.56.0. Use CURLOPT_MIMEPOST [-Wdeprecated-declarations] 1688 | MAKE_ICONSTANT("CURLOPT_HTTPPOST", CURLOPT_HTTPPOST), | ^~~~~~~~~~~~~~ /usr/include/arm-linux-gnueabihf/curl/curl.h:1191:3: note: declared here 1191 | CURLOPTDEPRECATED(CURLOPT_HTTPPOST, CURLOPTTYPE_OBJECTPOINT, 24, | ^~~~~~~~~~~~~~~~~ curl-module.c:1770:4: warning: 'CURLOPT_RANDOM_FILE' is deprecated: since 7.84.0. Serves no purpose anymore [-Wdeprecated-declarations] 1770 | MAKE_ICONSTANT("CURLOPT_RANDOM_FILE", CURLOPT_RANDOM_FILE), | ^~~~~~~~~~~~~~ /usr/include/arm-linux-gnueabihf/curl/curl.h:1360:3: note: declared here 1360 | CURLOPTDEPRECATED(CURLOPT_RANDOM_FILE, CURLOPTTYPE_STRINGPOINT, 76, | ^~~~~~~~~~~~~~~~~ curl-module.c:1771:4: warning: 'CURLOPT_EGDSOCKET' is deprecated: since 7.84.0. Serves no purpose anymore [-Wdeprecated-declarations] 1771 | MAKE_ICONSTANT("CURLOPT_EGDSOCKET", CURLOPT_EGDSOCKET), | ^~~~~~~~~~~~~~ /usr/include/arm-linux-gnueabihf/curl/curl.h:1364:3: note: declared here 1364 | CURLOPTDEPRECATED(CURLOPT_EGDSOCKET, CURLOPTTYPE_STRINGPOINT, 77, | ^~~~~~~~~~~~~~~~~ curl-module.c:1801:4: warning: 'CURLINFO_SIZE_UPLOAD' is deprecated: since 7.55.0. Use CURLINFO_SIZE_UPLOAD_T [-Wdeprecated-declarations] 1801 | MAKE_ICONSTANT("CURLINFO_SIZE_UPLOAD", CURLINFO_SIZE_UPLOAD), | ^~~~~~~~~~~~~~ /usr/include/arm-linux-gnueabihf/curl/curl.h:2859:3: note: declared here 2859 | CURLINFO_SIZE_UPLOAD CURL_DEPRECATED(7.55.0, "Use CURLINFO_SIZE_UPLOAD_T") | ^~~~~~~~~~~~~~~~~~~~ curl-module.c:1802:4: warning: 'CURLINFO_SIZE_DOWNLOAD' is deprecated: since 7.55.0. Use CURLINFO_SIZE_DOWNLOAD_T [-Wdeprecated-declarations] 1802 | MAKE_ICONSTANT("CURLINFO_SIZE_DOWNLOAD", CURLINFO_SIZE_DOWNLOAD), | ^~~~~~~~~~~~~~ /usr/include/arm-linux-gnueabihf/curl/curl.h:2862:3: note: declared here 2862 | CURLINFO_SIZE_DOWNLOAD | ^~~~~~~~~~~~~~~~~~~~~~ curl-module.c:1803:4: warning: 'CURLINFO_SPEED_DOWNLOAD' is deprecated: since 7.55.0. Use CURLINFO_SPEED_DOWNLOAD_T [-Wdeprecated-declarations] 1803 | MAKE_ICONSTANT("CURLINFO_SPEED_DOWNLOAD", CURLINFO_SPEED_DOWNLOAD), | ^~~~~~~~~~~~~~ /usr/include/arm-linux-gnueabihf/curl/curl.h:2866:3: note: declared here 2866 | CURLINFO_SPEED_DOWNLOAD | ^~~~~~~~~~~~~~~~~~~~~~~ curl-module.c:1804:4: warning: 'CURLINFO_SPEED_UPLOAD' is deprecated: since 7.55.0. Use CURLINFO_SPEED_UPLOAD_T [-Wdeprecated-declarations] 1804 | MAKE_ICONSTANT("CURLINFO_SPEED_UPLOAD", CURLINFO_SPEED_UPLOAD), | ^~~~~~~~~~~~~~ /usr/include/arm-linux-gnueabihf/curl/curl.h:2870:3: note: declared here 2870 | CURLINFO_SPEED_UPLOAD | ^~~~~~~~~~~~~~~~~~~~~ curl-module.c:1809:4: warning: 'CURLINFO_CONTENT_LENGTH_DOWNLOAD' is deprecated: since 7.55.0. Use CURLINFO_CONTENT_LENGTH_DOWNLOAD_T [-Wdeprecated-declarations] 1809 | MAKE_ICONSTANT("CURLINFO_CONTENT_LENGTH_DOWNLOAD", CURLINFO_CONTENT_LENGTH_DOWNLOAD), | ^~~~~~~~~~~~~~ /usr/include/arm-linux-gnueabihf/curl/curl.h:2879:3: note: declared here 2879 | CURLINFO_CONTENT_LENGTH_DOWNLOAD | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ curl-module.c:1810:4: warning: 'CURLINFO_CONTENT_LENGTH_UPLOAD' is deprecated: since 7.55.0. Use CURLINFO_CONTENT_LENGTH_UPLOAD_T [-Wdeprecated-declarations] 1810 | MAKE_ICONSTANT("CURLINFO_CONTENT_LENGTH_UPLOAD", CURLINFO_CONTENT_LENGTH_UPLOAD), | ^~~~~~~~~~~~~~ /usr/include/arm-linux-gnueabihf/curl/curl.h:2884:3: note: declared here 2884 | CURLINFO_CONTENT_LENGTH_UPLOAD | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ make[3]: Leaving directory '/build/reproducible-path/slcurl-0.2.2~pre.12/src' make[2]: Leaving directory '/build/reproducible-path/slcurl-0.2.2~pre.12' make[1]: Leaving directory '/build/reproducible-path/slcurl-0.2.2~pre.12' create-stamp debian/debhelper-build-stamp dh_testroot -O--no-parallel dh_prep -O--no-parallel dh_auto_install --destdir=debian/slang-curl/ -O--no-parallel make -j1 install DESTDIR=/build/reproducible-path/slcurl-0.2.2\~pre.12/debian/slang-curl AM_UPDATE_INFO_DIR=no make[1]: Entering directory '/build/reproducible-path/slcurl-0.2.2~pre.12' cd src; make install make[2]: Entering directory '/build/reproducible-path/slcurl-0.2.2~pre.12/src' ../autoconf/mkinsdir.sh /build/reproducible-path/slcurl-0.2.2~pre.12/debian/slang-curl/usr/lib/arm-linux-gnueabihf/slang/v2/modules mkdir /build/reproducible-path/slcurl-0.2.2~pre.12/debian/slang-curl/usr mkdir /build/reproducible-path/slcurl-0.2.2~pre.12/debian/slang-curl/usr/lib mkdir /build/reproducible-path/slcurl-0.2.2~pre.12/debian/slang-curl/usr/lib/arm-linux-gnueabihf mkdir /build/reproducible-path/slcurl-0.2.2~pre.12/debian/slang-curl/usr/lib/arm-linux-gnueabihf/slang mkdir /build/reproducible-path/slcurl-0.2.2~pre.12/debian/slang-curl/usr/lib/arm-linux-gnueabihf/slang/v2 mkdir /build/reproducible-path/slcurl-0.2.2~pre.12/debian/slang-curl/usr/lib/arm-linux-gnueabihf/slang/v2/modules ../autoconf/mkinsdir.sh /build/reproducible-path/slcurl-0.2.2~pre.12/debian/slang-curl/usr/share/slsh/local-packages mkdir /build/reproducible-path/slcurl-0.2.2~pre.12/debian/slang-curl/usr/share mkdir /build/reproducible-path/slcurl-0.2.2~pre.12/debian/slang-curl/usr/share/slsh mkdir /build/reproducible-path/slcurl-0.2.2~pre.12/debian/slang-curl/usr/share/slsh/local-packages ../autoconf/mkinsdir.sh /build/reproducible-path/slcurl-0.2.2~pre.12/debian/slang-curl/usr/share/slsh/local-packages/help mkdir /build/reproducible-path/slcurl-0.2.2~pre.12/debian/slang-curl/usr/share/slsh/local-packages/help ../autoconf/mkinsdir.sh /build/reproducible-path/slcurl-0.2.2~pre.12/debian/slang-curl/usr/share/doc/slang-curl mkdir /build/reproducible-path/slcurl-0.2.2~pre.12/debian/slang-curl/usr/share/doc mkdir /build/reproducible-path/slcurl-0.2.2~pre.12/debian/slang-curl/usr/share/doc/slang-curl ../autoconf/mkinsdir.sh /build/reproducible-path/slcurl-0.2.2~pre.12/debian/slang-curl/usr/share/doc/slang-curl/examples/ mkdir /build/reproducible-path/slcurl-0.2.2~pre.12/debian/slang-curl/usr/share/doc/slang-curl/examples /usr/bin/install -c curl-module.so /build/reproducible-path/slcurl-0.2.2~pre.12/debian/slang-curl/usr/lib/arm-linux-gnueabihf/slang/v2/modules/curl-module.so.0.2.2 /usr/bin/install -c -m 644 curl.sl /build/reproducible-path/slcurl-0.2.2~pre.12/debian/slang-curl/usr/share/slsh/local-packages /usr/bin/install -c -m 644 ../doc/help/curl.hlp /build/reproducible-path/slcurl-0.2.2~pre.12/debian/slang-curl/usr/share/slsh/local-packages/help /usr/bin/install -c -m 644 ../doc/text/curl.txt /build/reproducible-path/slcurl-0.2.2~pre.12/debian/slang-curl/usr/share/doc/slang-curl /usr/bin/install -c ../demo/translate /build/reproducible-path/slcurl-0.2.2~pre.12/debian/slang-curl/usr/share/doc/slang-curl/examples/ make[2]: Leaving directory '/build/reproducible-path/slcurl-0.2.2~pre.12/src' make[1]: Leaving directory '/build/reproducible-path/slcurl-0.2.2~pre.12' dh_installdocs -O--no-parallel dh_installchangelogs -O--no-parallel dh_installexamples -O--no-parallel dh_installsystemduser -O--no-parallel dh_perl -O--no-parallel dh_link -O--no-parallel dh_strip_nondeterminism -O--no-parallel dh_compress -O--no-parallel dh_fixperms -O--no-parallel dh_missing -O--no-parallel dh_dwz -a -O--no-parallel dh_strip -a -O--no-parallel dh_makeshlibs -a -O--no-parallel dh_shlibdeps -a -O--no-parallel dh_installdeb -O--no-parallel dh_gencontrol -O--no-parallel dh_md5sums -O--no-parallel dh_builddeb -O--no-parallel dpkg-deb: building package 'slang-curl-dbgsym' in '../slang-curl-dbgsym_0.2.2~pre.12-2_armhf.deb'. dpkg-deb: building package 'slang-curl' in '../slang-curl_0.2.2~pre.12-2_armhf.deb'. dpkg-genbuildinfo --build=binary -O../slcurl_0.2.2~pre.12-2_armhf.buildinfo dpkg-genchanges --build=binary -O../slcurl_0.2.2~pre.12-2_armhf.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-source: info: using options from slcurl-0.2.2~pre.12/debian/source/options: --extend-diff-ignore=^configure$ dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/21658 and its subdirectories I: Current time: Tue May 7 10:46:06 -12 2024 I: pbuilder-time-stamp: 1715121966 Tue May 7 22:46:14 UTC 2024 I: 1st build successful. Starting 2nd build on remote node virt64z-armhf-rb.debian.net. Tue May 7 22:46:14 UTC 2024 I: Preparing to do remote build '2' on virt64z-armhf-rb.debian.net. Tue May 7 22:47:17 UTC 2024 I: Deleting $TMPDIR on virt64z-armhf-rb.debian.net. Tue May 7 22:47:19 UTC 2024 I: slcurl_0.2.2~pre.12-2_armhf.changes: Format: 1.8 Date: Mon, 05 Dec 2022 12:33:38 -0300 Source: slcurl Binary: slang-curl slang-curl-dbgsym Architecture: armhf Version: 0.2.2~pre.12-2 Distribution: unstable Urgency: medium Maintainer: Rafael Laboissière Changed-By: Rafael Laboissière Description: slang-curl - transfer files using HTTP and FTP from S-Lang Changes: slcurl (0.2.2~pre.12-2) unstable; urgency=medium . [ Debian Janitor ] * Remove constraints unnecessary since buster (oldstable): + Build-Depends: Drop versioned constraint on libslang2-dev. + slang-curl: Drop versioned constraint on slsh in Suggests. Checksums-Sha1: 28a96113d8050da3f132fcaafdd396de6ba3a362 30980 slang-curl-dbgsym_0.2.2~pre.12-2_armhf.deb 6da5de3764edadc29c121b154ca5ebda630e0007 26260 slang-curl_0.2.2~pre.12-2_armhf.deb 353b66303f96b576fbd9d25539cfdbac5fb8c1f6 5773 slcurl_0.2.2~pre.12-2_armhf.buildinfo Checksums-Sha256: 3c21dad3248c0ad63d8413c3b46cd803c5c046c9ea5550ad91c4e9463e44c421 30980 slang-curl-dbgsym_0.2.2~pre.12-2_armhf.deb aa61bcc9bce75115de4e7eb923992a67d9564dd602d6b484eccdde9f3a7aa3c1 26260 slang-curl_0.2.2~pre.12-2_armhf.deb dcb73304002679d254f1cd505a3cd48353e7c7dd4cbf2d4f0656fffb9296c1a4 5773 slcurl_0.2.2~pre.12-2_armhf.buildinfo Files: 0f1ecf401a754aacc529d4a1b7caa5f0 30980 debug optional slang-curl-dbgsym_0.2.2~pre.12-2_armhf.deb 2a1e51d1314580c7546d29167ef35b56 26260 interpreters optional slang-curl_0.2.2~pre.12-2_armhf.deb 0e91aa23fd24de564fbffbf3fba32c46 5773 interpreters optional slcurl_0.2.2~pre.12-2_armhf.buildinfo Tue May 7 22:47:20 UTC 2024 I: diffoscope 265 will be used to compare the two builds: Running as unit: rb-diffoscope-armhf_3-4824.service # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.mE4EnGyC/slcurl_0.2.2~pre.12-2.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.mE4EnGyC/slcurl_0.2.2~pre.12-2.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.mE4EnGyC/slcurl_0.2.2~pre.12-2.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.mE4EnGyC/b1/slcurl_0.2.2~pre.12-2_armhf.changes /srv/reproducible-results/rbuild-debian/r-b-build.mE4EnGyC/b2/slcurl_0.2.2~pre.12-2_armhf.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.378s) 0.378s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.017s) 0.017s 12 calls diffoscope.comparators.binary.FilesystemFile ## specialize (total time: 0.000s) 0.000s 1 call specialize Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 744ms CPU time consumed: 741ms Tue May 7 22:47:22 UTC 2024 I: diffoscope 265 found no differences in the changes files, and a .buildinfo file also exists. Tue May 7 22:47:22 UTC 2024 I: slcurl from trixie built successfully and reproducibly on armhf. Tue May 7 22:47:23 UTC 2024 I: Submitting .buildinfo files to external archives: Tue May 7 22:47:23 UTC 2024 I: Submitting 8.0K b1/slcurl_0.2.2~pre.12-2_armhf.buildinfo.asc Tue May 7 22:47:25 UTC 2024 I: Submitting 8.0K b2/slcurl_0.2.2~pre.12-2_armhf.buildinfo.asc Tue May 7 22:47:26 UTC 2024 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Tue May 7 22:47:26 UTC 2024 I: Done submitting .buildinfo files. Tue May 7 22:47:26 UTC 2024 I: Removing signed slcurl_0.2.2~pre.12-2_armhf.buildinfo.asc files: removed './b1/slcurl_0.2.2~pre.12-2_armhf.buildinfo.asc' removed './b2/slcurl_0.2.2~pre.12-2_armhf.buildinfo.asc'