Wed Jul 10 14:03:31 UTC 2024 I: starting to build sensible-utils/trixie/armhf on jenkins on '2024-07-10 14:03' Wed Jul 10 14:03:31 UTC 2024 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/armhf_18/6287/console.log Wed Jul 10 14:03:31 UTC 2024 I: Downloading source for trixie/sensible-utils=0.0.24 --2024-07-10 14:03:31-- http://deb.debian.org/debian/pool/main/s/sensible-utils/sensible-utils_0.0.24.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 1743 (1.7K) [text/prs.lines.tag] Saving to: ‘sensible-utils_0.0.24.dsc’ 0K . 100% 220M=0s 2024-07-10 14:03:31 (220 MB/s) - ‘sensible-utils_0.0.24.dsc’ saved [1743/1743] Wed Jul 10 14:03:32 UTC 2024 I: sensible-utils_0.0.24.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (native) Source: sensible-utils Binary: sensible-utils Architecture: all Version: 0.0.24 Maintainer: Anibal Monsalve Salazar Uploaders: Bastien Roucariès Standards-Version: 4.6.2 Vcs-Browser: https://salsa.debian.org/debian/sensible-utils Vcs-Git: https://salsa.debian.org/debian/sensible-utils.git Testsuite: autopkgtest Testsuite-Triggers: ed, shellcheck Build-Depends: debhelper-compat (= 13) Build-Depends-Indep: po4a, ed Package-List: sensible-utils deb utils required arch=all Checksums-Sha1: 287f283a2d47bcf973b71b5deefb10b40b9755e1 73568 sensible-utils_0.0.24.tar.xz Checksums-Sha256: 620602b900bad2b9856556a7895ea146110f602cd526a1cc03068a0bc9542803 73568 sensible-utils_0.0.24.tar.xz Files: d6d54ddbe6ab25e8bfdb0190274e29e5 73568 sensible-utils_0.0.24.tar.xz -----BEGIN PGP SIGNATURE----- iQJFBAEBCgAvFiEEXQGHuUCiRbrXsPVqADoaLapBCF8FAmZ5xagRHHJvdWNhQGRl Ymlhbi5vcmcACgkQADoaLapBCF/M5A/8C6LYTv+aCDOHAdIU/1thXnbuPpEwZ8F4 lnX7YOGNfBGSnDyjp9jdj1XLVMaXqGyk75+LMm1BtDwgT3WQN5iWjdrgM/YUmbqw /0WybTYrPdFa1KCN2mkN424SQSNbvWWyghYmwwaeI+Dx51y/hpjtyqZ15faWFwCX zztvQpyDiB2IJ5swYVdkQ1pOgyITIScrskPeZJz3VArKeJ9ioIg08DJWR0unjJC/ Rxg9lY9A7OKmOPgxh/hlcFSp23eDDi3kRTSNGVcOiIILE+RveMIyVRk6AUbEGwcy YhbOi+PN6hts5SLz9frcgJGaH7j7KwoUBBZzudgn5MPWmZ9cmDuZw6dG6wMguGny wFL0Mpgr+A9IDuohkhB4mo+v+snU2LchDc2y1gbmawruUbkraxEYHq1s3Jv39eL8 DBubcS+TAYXcQ5yz75UVOYk8wCfqph8use/PONXXZi77dC0mrNEBBfj2JIsL5lJL WM317kzxrDz1ASQVoT8XJwmhsfTbVNM27Bnr20YCyUUO/MAT58q7QwjcjriTunVo w38ph10bVMqYXEp/HiH2aA9ZbSMnAnAK5oSSqcYeXYIdhy9yb0nsW+vV6vlmG6CN i0A4R1mXU89Yl4ijAFARAfJU8GmgM//xKRucJi/2ZGtY5Gn7xpBYx5mofUeQT85T ez4x9ZEke7U= =LR5J -----END PGP SIGNATURE----- Wed Jul 10 14:03:32 UTC 2024 I: Checking whether the package is not for us Wed Jul 10 14:03:32 UTC 2024 I: Starting 1st build on remote node ff64a-armhf-rb.debian.net. Wed Jul 10 14:03:32 UTC 2024 I: Preparing to do remote build '1' on ff64a-armhf-rb.debian.net. Wed Jul 10 14:06:44 UTC 2024 I: Deleting $TMPDIR on ff64a-armhf-rb.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Wed Jul 10 02:03:40 -12 2024 I: pbuilder-time-stamp: 1720620220 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [sensible-utils_0.0.24.dsc] I: copying [./sensible-utils_0.0.24.tar.xz] I: Extracting source gpgv: Signature made Mon Jun 24 19:14:48 2024 gpgv: using RSA key 5D0187B940A245BAD7B0F56A003A1A2DAA41085F gpgv: issuer "rouca@debian.org" gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./sensible-utils_0.0.24.dsc: no acceptable signature found dpkg-source: info: extracting sensible-utils in sensible-utils-0.0.24 dpkg-source: info: unpacking sensible-utils_0.0.24.tar.xz I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/26806/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='armhf' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=5 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='armhf' IFS=' ' INVOCATION_ID='09d8782accc44989816f2fd67950dd71' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='26806' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.Af9tjva6/pbuilderrc_jP05 --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.Af9tjva6/b1 --logfile b1/build.log sensible-utils_0.0.24.dsc' SUDO_GID='114' SUDO_UID='109' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://10.0.0.15:3142/' I: uname -a Linux ff64a 6.1.0-22-arm64 #1 SMP Debian 6.1.94-1 (2024-06-21) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Jun 5 22:35 /bin -> usr/bin I: user script /srv/workspace/pbuilder/26806/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: armhf Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), po4a, ed dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19413 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on po4a; however: Package po4a is not installed. pbuilder-satisfydepends-dummy depends on ed; however: Package ed is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} ed{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libicu72{a} libmagic-mgc{a} libmagic1t64{a} libosp5{a} libpipeline1{a} libpod-parser-perl{a} libsgmls-perl{a} libsyntax-keyword-try-perl{a} libtool{a} libuchardet0{a} libxml2{a} libxs-parse-keyword-perl{a} libyaml-tiny-perl{a} m4{a} man-db{a} opensp{a} po-debconf{a} po4a{a} sensible-utils{a} sgml-base{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl liblocale-gettext-perl libltdl-dev libmail-sendmail-perl libterm-readkey-perl libtext-wrapi18n-perl libunicode-linebreak-perl lynx wget 0 packages upgraded, 39 newly installed, 0 to remove and 0 not upgraded. Need to get 22.7 MB of archives. After unpacking 78.0 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main armhf sgml-base all 1.31 [15.4 kB] Get: 2 http://deb.debian.org/debian trixie/main armhf sensible-utils all 0.0.24 [24.8 kB] Get: 3 http://deb.debian.org/debian trixie/main armhf libmagic-mgc armhf 1:5.45-3 [314 kB] Get: 4 http://deb.debian.org/debian trixie/main armhf libmagic1t64 armhf 1:5.45-3 [98.1 kB] Get: 5 http://deb.debian.org/debian trixie/main armhf file armhf 1:5.45-3 [42.0 kB] Get: 6 http://deb.debian.org/debian trixie/main armhf gettext-base armhf 0.22.5-1 [195 kB] Get: 7 http://deb.debian.org/debian trixie/main armhf libuchardet0 armhf 0.0.8-1+b1 [65.7 kB] Get: 8 http://deb.debian.org/debian trixie/main armhf groff-base armhf 1.23.0-5 [1091 kB] Get: 9 http://deb.debian.org/debian trixie/main armhf bsdextrautils armhf 2.40.1-9 [87.8 kB] Get: 10 http://deb.debian.org/debian trixie/main armhf libpipeline1 armhf 1.5.7-2 [33.3 kB] Get: 11 http://deb.debian.org/debian trixie/main armhf man-db armhf 2.12.1-2 [1376 kB] Get: 12 http://deb.debian.org/debian trixie/main armhf m4 armhf 1.4.19-4 [264 kB] Get: 13 http://deb.debian.org/debian trixie/main armhf autoconf all 2.71-3 [332 kB] Get: 14 http://deb.debian.org/debian trixie/main armhf autotools-dev all 20220109.1 [51.6 kB] Get: 15 http://deb.debian.org/debian trixie/main armhf automake all 1:1.16.5-1.3 [823 kB] Get: 16 http://deb.debian.org/debian trixie/main armhf autopoint all 0.22.5-1 [723 kB] Get: 17 http://deb.debian.org/debian trixie/main armhf libdebhelper-perl all 13.16 [88.6 kB] Get: 18 http://deb.debian.org/debian trixie/main armhf libtool all 2.4.7-7 [517 kB] Get: 19 http://deb.debian.org/debian trixie/main armhf dh-autoreconf all 20 [17.1 kB] Get: 20 http://deb.debian.org/debian trixie/main armhf libarchive-zip-perl all 1.68-1 [104 kB] Get: 21 http://deb.debian.org/debian trixie/main armhf libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get: 22 http://deb.debian.org/debian trixie/main armhf dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get: 23 http://deb.debian.org/debian trixie/main armhf libelf1t64 armhf 0.191-1+b1 [183 kB] Get: 24 http://deb.debian.org/debian trixie/main armhf dwz armhf 0.15-1+b2 [106 kB] Get: 25 http://deb.debian.org/debian trixie/main armhf libicu72 armhf 72.1-5 [9075 kB] Get: 26 http://deb.debian.org/debian trixie/main armhf libxml2 armhf 2.9.14+dfsg-1.3+b3 [598 kB] Get: 27 http://deb.debian.org/debian trixie/main armhf gettext armhf 0.22.5-1 [1479 kB] Get: 28 http://deb.debian.org/debian trixie/main armhf intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 29 http://deb.debian.org/debian trixie/main armhf po-debconf all 1.0.21+nmu1 [248 kB] Get: 30 http://deb.debian.org/debian trixie/main armhf debhelper all 13.16 [891 kB] Get: 31 http://deb.debian.org/debian trixie/main armhf ed armhf 1.20.2-2 [56.6 kB] Get: 32 http://deb.debian.org/debian trixie/main armhf libosp5 armhf 1.5.2-15 [883 kB] Get: 33 http://deb.debian.org/debian trixie/main armhf libpod-parser-perl all 1.67-1 [94.1 kB] Get: 34 http://deb.debian.org/debian trixie/main armhf libsgmls-perl all 1.03ii-38 [23.7 kB] Get: 35 http://deb.debian.org/debian trixie/main armhf libxs-parse-keyword-perl armhf 0.42-1 [57.1 kB] Get: 36 http://deb.debian.org/debian trixie/main armhf libsyntax-keyword-try-perl armhf 0.29-2 [26.0 kB] Get: 37 http://deb.debian.org/debian trixie/main armhf libyaml-tiny-perl all 1.74-1 [30.7 kB] Get: 38 http://deb.debian.org/debian trixie/main armhf opensp armhf 1.5.2-15 [434 kB] Get: 39 http://deb.debian.org/debian trixie/main armhf po4a all 0.73-1 [2157 kB] Fetched 22.7 MB in 1s (21.1 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sgml-base. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19413 files and directories currently installed.) Preparing to unpack .../00-sgml-base_1.31_all.deb ... Unpacking sgml-base (1.31) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../01-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../02-libmagic-mgc_1%3a5.45-3_armhf.deb ... Unpacking libmagic-mgc (1:5.45-3) ... Selecting previously unselected package libmagic1t64:armhf. Preparing to unpack .../03-libmagic1t64_1%3a5.45-3_armhf.deb ... Unpacking libmagic1t64:armhf (1:5.45-3) ... Selecting previously unselected package file. Preparing to unpack .../04-file_1%3a5.45-3_armhf.deb ... Unpacking file (1:5.45-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../05-gettext-base_0.22.5-1_armhf.deb ... Unpacking gettext-base (0.22.5-1) ... Selecting previously unselected package libuchardet0:armhf. Preparing to unpack .../06-libuchardet0_0.0.8-1+b1_armhf.deb ... Unpacking libuchardet0:armhf (0.0.8-1+b1) ... Selecting previously unselected package groff-base. Preparing to unpack .../07-groff-base_1.23.0-5_armhf.deb ... Unpacking groff-base (1.23.0-5) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../08-bsdextrautils_2.40.1-9_armhf.deb ... Unpacking bsdextrautils (2.40.1-9) ... Selecting previously unselected package libpipeline1:armhf. Preparing to unpack .../09-libpipeline1_1.5.7-2_armhf.deb ... Unpacking libpipeline1:armhf (1.5.7-2) ... Selecting previously unselected package man-db. Preparing to unpack .../10-man-db_2.12.1-2_armhf.deb ... Unpacking man-db (2.12.1-2) ... Selecting previously unselected package m4. Preparing to unpack .../11-m4_1.4.19-4_armhf.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../12-autoconf_2.71-3_all.deb ... Unpacking autoconf (2.71-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../13-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../14-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../15-autopoint_0.22.5-1_all.deb ... Unpacking autopoint (0.22.5-1) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../16-libdebhelper-perl_13.16_all.deb ... Unpacking libdebhelper-perl (13.16) ... Selecting previously unselected package libtool. Preparing to unpack .../17-libtool_2.4.7-7_all.deb ... Unpacking libtool (2.4.7-7) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../18-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../19-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../20-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../21-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:armhf. Preparing to unpack .../22-libelf1t64_0.191-1+b1_armhf.deb ... Unpacking libelf1t64:armhf (0.191-1+b1) ... Selecting previously unselected package dwz. Preparing to unpack .../23-dwz_0.15-1+b2_armhf.deb ... Unpacking dwz (0.15-1+b2) ... Selecting previously unselected package libicu72:armhf. Preparing to unpack .../24-libicu72_72.1-5_armhf.deb ... Unpacking libicu72:armhf (72.1-5) ... Selecting previously unselected package libxml2:armhf. Preparing to unpack .../25-libxml2_2.9.14+dfsg-1.3+b3_armhf.deb ... Unpacking libxml2:armhf (2.9.14+dfsg-1.3+b3) ... Selecting previously unselected package gettext. Preparing to unpack .../26-gettext_0.22.5-1_armhf.deb ... Unpacking gettext (0.22.5-1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../27-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../28-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../29-debhelper_13.16_all.deb ... Unpacking debhelper (13.16) ... Selecting previously unselected package ed. Preparing to unpack .../30-ed_1.20.2-2_armhf.deb ... Unpacking ed (1.20.2-2) ... Selecting previously unselected package libosp5. Preparing to unpack .../31-libosp5_1.5.2-15_armhf.deb ... Unpacking libosp5 (1.5.2-15) ... Selecting previously unselected package libpod-parser-perl. Preparing to unpack .../32-libpod-parser-perl_1.67-1_all.deb ... Adding 'diversion of /usr/bin/podselect to /usr/bin/podselect.bundled by libpod-parser-perl' Adding 'diversion of /usr/share/man/man1/podselect.1.gz to /usr/share/man/man1/podselect.bundled.1.gz by libpod-parser-perl' Unpacking libpod-parser-perl (1.67-1) ... Selecting previously unselected package libsgmls-perl. Preparing to unpack .../33-libsgmls-perl_1.03ii-38_all.deb ... Unpacking libsgmls-perl (1.03ii-38) ... Selecting previously unselected package libxs-parse-keyword-perl. Preparing to unpack .../34-libxs-parse-keyword-perl_0.42-1_armhf.deb ... Unpacking libxs-parse-keyword-perl (0.42-1) ... Selecting previously unselected package libsyntax-keyword-try-perl. Preparing to unpack .../35-libsyntax-keyword-try-perl_0.29-2_armhf.deb ... Unpacking libsyntax-keyword-try-perl (0.29-2) ... Selecting previously unselected package libyaml-tiny-perl. Preparing to unpack .../36-libyaml-tiny-perl_1.74-1_all.deb ... Unpacking libyaml-tiny-perl (1.74-1) ... Selecting previously unselected package opensp. Preparing to unpack .../37-opensp_1.5.2-15_armhf.deb ... Unpacking opensp (1.5.2-15) ... Selecting previously unselected package po4a. Preparing to unpack .../38-po4a_0.73-1_all.deb ... Unpacking po4a (0.73-1) ... Setting up libpipeline1:armhf (1.5.7-2) ... Setting up libsgmls-perl (1.03ii-38) ... Setting up libicu72:armhf (72.1-5) ... Setting up bsdextrautils (2.40.1-9) ... Setting up libmagic-mgc (1:5.45-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.16) ... Setting up libmagic1t64:armhf (1:5.45-3) ... Setting up gettext-base (0.22.5-1) ... Setting up m4 (1.4.19-4) ... Setting up file (1:5.45-3) ... Setting up libyaml-tiny-perl (1.74-1) ... Setting up libelf1t64:armhf (0.191-1+b1) ... Setting up libosp5 (1.5.2-15) ... Setting up autotools-dev (20220109.1) ... Setting up libxs-parse-keyword-perl (0.42-1) ... Setting up ed (1.20.2-2) ... Setting up libpod-parser-perl (1.67-1) ... Setting up autopoint (0.22.5-1) ... Setting up autoconf (2.71-3) ... Setting up libsyntax-keyword-try-perl (0.29-2) ... Setting up dwz (0.15-1+b2) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:armhf (0.0.8-1+b1) ... Setting up sgml-base (1.31) ... Setting up libxml2:armhf (2.9.14+dfsg-1.3+b3) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up gettext (0.22.5-1) ... Setting up libtool (2.4.7-7) ... Setting up opensp (1.5.2-15) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up groff-base (1.23.0-5) ... Setting up po4a (0.73-1) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.12.1-2) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.16) ... Processing triggers for libc-bin (2.38-14) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/reproducible-path/sensible-utils-0.0.24/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../sensible-utils_0.0.24_source.changes dpkg-buildpackage: info: source package sensible-utils dpkg-buildpackage: info: source version 0.0.24 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Bastien Roucariès dpkg-source --before-build . dpkg-buildpackage: info: host architecture armhf debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure ./configure --build=arm-linux-gnueabihf --prefix=/usr --includedir=\${prefix}/include --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info --sysconfdir=/etc --localstatedir=/var --disable-option-checking --disable-silent-rules --libdir=\${prefix}/lib/arm-linux-gnueabihf --runstatedir=/run --disable-maintainer-mode --disable-dependency-tracking checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a race-free mkdir -p... /usr/bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking for po4a... po4a checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating man/Makefile dh_auto_build make -j5 make[1]: Entering directory '/build/reproducible-path/sensible-utils-0.0.24' Making all in man make[2]: Entering directory '/build/reproducible-path/sensible-utils-0.0.24/man' sed -f ./utf8toman.sed -e 's/%PACKAGE%/sensible-utils/g' -e 's/%VERSION%/0.0.21/g' -e 's/%RELEASE_DATE%//g' -e 's:%CONFDIR%:/etc:g' -e 's:%LOGDIR%::g' -e 's:%ADMINDIR%::g' -e 's:%PKGDOCDIR%:/usr/share/doc/sensible-utils:g' -e 's:%PKGCONFDIR%::g' -e 's:%PKGLIBDIR%:/usr/libexec/sensible-utils:g' -e 's:%PKGDATADIR%:/usr/share/sensible-utils:g' sensible-editor.man >sensible-editor.1 sed -f ./utf8toman.sed -e 's/%PACKAGE%/sensible-utils/g' -e 's/%VERSION%/0.0.21/g' -e 's/%RELEASE_DATE%//g' -e 's:%CONFDIR%:/etc:g' -e 's:%LOGDIR%::g' -e 's:%ADMINDIR%::g' -e 's:%PKGDOCDIR%:/usr/share/doc/sensible-utils:g' -e 's:%PKGCONFDIR%::g' -e 's:%PKGLIBDIR%:/usr/libexec/sensible-utils:g' -e 's:%PKGDATADIR%:/usr/share/sensible-utils:g' sensible-browser.man >sensible-browser.1 sed -f ./utf8toman.sed -e 's/%PACKAGE%/sensible-utils/g' -e 's/%VERSION%/0.0.21/g' -e 's/%RELEASE_DATE%//g' -e 's:%CONFDIR%:/etc:g' -e 's:%LOGDIR%::g' -e 's:%ADMINDIR%::g' -e 's:%PKGDOCDIR%:/usr/share/doc/sensible-utils:g' -e 's:%PKGCONFDIR%::g' -e 's:%PKGLIBDIR%:/usr/libexec/sensible-utils:g' -e 's:%PKGDATADIR%:/usr/share/sensible-utils:g' sensible-pager.man >sensible-pager.1 sed -f ./utf8toman.sed -e 's/%PACKAGE%/sensible-utils/g' -e 's/%VERSION%/0.0.21/g' -e 's/%RELEASE_DATE%//g' -e 's:%CONFDIR%:/etc:g' -e 's:%LOGDIR%::g' -e 's:%ADMINDIR%::g' -e 's:%PKGDOCDIR%:/usr/share/doc/sensible-utils:g' -e 's:%PKGCONFDIR%::g' -e 's:%PKGLIBDIR%:/usr/libexec/sensible-utils:g' -e 's:%PKGDATADIR%:/usr/share/sensible-utils:g' select-editor.man >select-editor.1 sed -f ./utf8toman.sed -e 's/%PACKAGE%/sensible-utils/g' -e 's/%VERSION%/0.0.21/g' -e 's/%RELEASE_DATE%//g' -e 's:%CONFDIR%:/etc:g' -e 's:%LOGDIR%::g' -e 's:%ADMINDIR%::g' -e 's:%PKGDOCDIR%:/usr/share/doc/sensible-utils:g' -e 's:%PKGCONFDIR%::g' -e 's:%PKGLIBDIR%:/usr/libexec/sensible-utils:g' -e 's:%PKGDATADIR%:/usr/share/sensible-utils:g' sensible-terminal.man >sensible-terminal.1 po4a --previous --srcdir . --destdir . --no-backups --porefs noline --msgmerge-opt=--add-location=file --package-name sensible-utils ./po4a/po4a.cfg (54 entries) Discard cs/sensible-editor.man (21 of 33 strings; only 63.63% translated; need 80%). Discard cs/sensible-browser.man (8 of 14 strings; only 57.14% translated; need 80%). Discard cs/sensible-pager.man (7 of 13 strings; only 53.84% translated; need 80%). Discard cs/select-editor.man (9 of 13 strings; only 69.23% translated; need 80%). Discard cs/sensible-terminal.man (5 of 11 strings; only 45.45% translated; need 80%). Discard es/sensible-editor.man (21 of 33 strings; only 63.63% translated; need 80%). Discard es/sensible-browser.man (8 of 14 strings; only 57.14% translated; need 80%). Discard es/sensible-pager.man (7 of 13 strings; only 53.84% translated; need 80%). Discard es/select-editor.man (9 of 13 strings; only 69.23% translated; need 80%). Discard es/sensible-terminal.man (5 of 11 strings; only 45.45% translated; need 80%). Discard it/sensible-editor.man (21 of 33 strings; only 63.63% translated; need 80%). Discard it/sensible-browser.man (8 of 14 strings; only 57.14% translated; need 80%). Discard it/sensible-pager.man (7 of 13 strings; only 53.84% translated; need 80%). Discard it/select-editor.man (9 of 13 strings; only 69.23% translated; need 80%). Discard it/sensible-terminal.man (5 of 11 strings; only 45.45% translated; need 80%). Discard ja/sensible-editor.man (7 of 33 strings; only 21.21% translated; need 80%). Discard ja/sensible-browser.man (6 of 14 strings; only 42.85% translated; need 80%). Discard ja/sensible-pager.man (6 of 13 strings; only 46.15% translated; need 80%). Discard ja/select-editor.man (5 of 13 strings; only 38.46% translated; need 80%). Discard ja/sensible-terminal.man (4 of 11 strings; only 36.36% translated; need 80%). Discard pl/sensible-browser.man (8 of 14 strings; only 57.14% translated; need 80%). Discard pl/sensible-pager.man (7 of 13 strings; only 53.84% translated; need 80%). Discard pl/select-editor.man (5 of 13 strings; only 38.46% translated; need 80%). Discard pl/sensible-terminal.man (5 of 11 strings; only 45.45% translated; need 80%). Discard pt/sensible-editor.man (25 of 33 strings; only 75.75% translated; need 80%). Discard pt/sensible-terminal.man (6 of 11 strings; only 54.54% translated; need 80%). touch man.stamp for lang in `sed -ne 's/^.*\[po4a_langs\] \(.*\)$/\1/p' ./po4a/po4a.cfg`; do \ files=""; \ for man in sensible-editor.1 sensible-browser.1 sensible-pager.1 select-editor.1 sensible-terminal.1; do \ trans="${man%%.[0-9]}.man"; \ if [ -f ./$lang/$trans ]; then \ files="$files ./$lang/$man"; \ elif [ -f ./$lang/$trans ]; then \ files="$files ./$lang/$man"; \ fi; \ done; \ make mandir="/usr/share/man/$lang" man_MANS="" man-once $files; \ done make[3]: Entering directory '/build/reproducible-path/sensible-utils-0.0.24/man' make[3]: Nothing to be done for 'man-once'. make[3]: Leaving directory '/build/reproducible-path/sensible-utils-0.0.24/man' make[3]: Entering directory '/build/reproducible-path/sensible-utils-0.0.24/man' make[3]: Nothing to be done for 'man-once'. sed -f ./utf8toman.sed -e 's/%PACKAGE%/sensible-utils/g' -e 's/%VERSION%/0.0.21/g' -e 's/%RELEASE_DATE%//g' -e 's:%CONFDIR%:/etc:g' -e 's:%LOGDIR%::g' -e 's:%ADMINDIR%::g' -e 's:%PKGDOCDIR%:/usr/share/doc/sensible-utils:g' -e 's:%PKGCONFDIR%::g' -e 's:%PKGLIBDIR%:/usr/libexec/sensible-utils:g' -e 's:%PKGDATADIR%:/usr/share/sensible-utils:g' de/sensible-editor.man >de/sensible-editor.1 sed -f ./utf8toman.sed -e 's/%PACKAGE%/sensible-utils/g' -e 's/%VERSION%/0.0.21/g' -e 's/%RELEASE_DATE%//g' -e 's:%CONFDIR%:/etc:g' -e 's:%LOGDIR%::g' -e 's:%ADMINDIR%::g' -e 's:%PKGDOCDIR%:/usr/share/doc/sensible-utils:g' -e 's:%PKGCONFDIR%::g' -e 's:%PKGLIBDIR%:/usr/libexec/sensible-utils:g' -e 's:%PKGDATADIR%:/usr/share/sensible-utils:g' de/sensible-browser.man >de/sensible-browser.1 sed -f ./utf8toman.sed -e 's/%PACKAGE%/sensible-utils/g' -e 's/%VERSION%/0.0.21/g' -e 's/%RELEASE_DATE%//g' -e 's:%CONFDIR%:/etc:g' -e 's:%LOGDIR%::g' -e 's:%ADMINDIR%::g' -e 's:%PKGDOCDIR%:/usr/share/doc/sensible-utils:g' -e 's:%PKGCONFDIR%::g' -e 's:%PKGLIBDIR%:/usr/libexec/sensible-utils:g' -e 's:%PKGDATADIR%:/usr/share/sensible-utils:g' de/sensible-pager.man >de/sensible-pager.1 sed -f ./utf8toman.sed -e 's/%PACKAGE%/sensible-utils/g' -e 's/%VERSION%/0.0.21/g' -e 's/%RELEASE_DATE%//g' -e 's:%CONFDIR%:/etc:g' -e 's:%LOGDIR%::g' -e 's:%ADMINDIR%::g' -e 's:%PKGDOCDIR%:/usr/share/doc/sensible-utils:g' -e 's:%PKGCONFDIR%::g' -e 's:%PKGLIBDIR%:/usr/libexec/sensible-utils:g' -e 's:%PKGDATADIR%:/usr/share/sensible-utils:g' de/select-editor.man >de/select-editor.1 sed -f ./utf8toman.sed -e 's/%PACKAGE%/sensible-utils/g' -e 's/%VERSION%/0.0.21/g' -e 's/%RELEASE_DATE%//g' -e 's:%CONFDIR%:/etc:g' -e 's:%LOGDIR%::g' -e 's:%ADMINDIR%::g' -e 's:%PKGDOCDIR%:/usr/share/doc/sensible-utils:g' -e 's:%PKGCONFDIR%::g' -e 's:%PKGLIBDIR%:/usr/libexec/sensible-utils:g' -e 's:%PKGDATADIR%:/usr/share/sensible-utils:g' de/sensible-terminal.man >de/sensible-terminal.1 make[3]: Leaving directory '/build/reproducible-path/sensible-utils-0.0.24/man' make[3]: Entering directory '/build/reproducible-path/sensible-utils-0.0.24/man' make[3]: Nothing to be done for 'man-once'. make[3]: Leaving directory '/build/reproducible-path/sensible-utils-0.0.24/man' make[3]: Entering directory '/build/reproducible-path/sensible-utils-0.0.24/man' make[3]: Nothing to be done for 'man-once'. sed -f ./utf8toman.sed -e 's/%PACKAGE%/sensible-utils/g' -e 's/%VERSION%/0.0.21/g' -e 's/%RELEASE_DATE%//g' -e 's:%CONFDIR%:/etc:g' -e 's:%LOGDIR%::g' -e 's:%ADMINDIR%::g' -e 's:%PKGDOCDIR%:/usr/share/doc/sensible-utils:g' -e 's:%PKGCONFDIR%::g' -e 's:%PKGLIBDIR%:/usr/libexec/sensible-utils:g' -e 's:%PKGDATADIR%:/usr/share/sensible-utils:g' fr/sensible-editor.man >fr/sensible-editor.1 sed -f ./utf8toman.sed -e 's/%PACKAGE%/sensible-utils/g' -e 's/%VERSION%/0.0.21/g' -e 's/%RELEASE_DATE%//g' -e 's:%CONFDIR%:/etc:g' -e 's:%LOGDIR%::g' -e 's:%ADMINDIR%::g' -e 's:%PKGDOCDIR%:/usr/share/doc/sensible-utils:g' -e 's:%PKGCONFDIR%::g' -e 's:%PKGLIBDIR%:/usr/libexec/sensible-utils:g' -e 's:%PKGDATADIR%:/usr/share/sensible-utils:g' fr/sensible-browser.man >fr/sensible-browser.1 sed -f ./utf8toman.sed -e 's/%PACKAGE%/sensible-utils/g' -e 's/%VERSION%/0.0.21/g' -e 's/%RELEASE_DATE%//g' -e 's:%CONFDIR%:/etc:g' -e 's:%LOGDIR%::g' -e 's:%ADMINDIR%::g' -e 's:%PKGDOCDIR%:/usr/share/doc/sensible-utils:g' -e 's:%PKGCONFDIR%::g' -e 's:%PKGLIBDIR%:/usr/libexec/sensible-utils:g' -e 's:%PKGDATADIR%:/usr/share/sensible-utils:g' fr/sensible-pager.man >fr/sensible-pager.1 sed -f ./utf8toman.sed -e 's/%PACKAGE%/sensible-utils/g' -e 's/%VERSION%/0.0.21/g' -e 's/%RELEASE_DATE%//g' -e 's:%CONFDIR%:/etc:g' -e 's:%LOGDIR%::g' -e 's:%ADMINDIR%::g' -e 's:%PKGDOCDIR%:/usr/share/doc/sensible-utils:g' -e 's:%PKGCONFDIR%::g' -e 's:%PKGLIBDIR%:/usr/libexec/sensible-utils:g' -e 's:%PKGDATADIR%:/usr/share/sensible-utils:g' fr/select-editor.man >fr/select-editor.1 sed -f ./utf8toman.sed -e 's/%PACKAGE%/sensible-utils/g' -e 's/%VERSION%/0.0.21/g' -e 's/%RELEASE_DATE%//g' -e 's:%CONFDIR%:/etc:g' -e 's:%LOGDIR%::g' -e 's:%ADMINDIR%::g' -e 's:%PKGDOCDIR%:/usr/share/doc/sensible-utils:g' -e 's:%PKGCONFDIR%::g' -e 's:%PKGLIBDIR%:/usr/libexec/sensible-utils:g' -e 's:%PKGDATADIR%:/usr/share/sensible-utils:g' fr/sensible-terminal.man >fr/sensible-terminal.1 make[3]: Leaving directory '/build/reproducible-path/sensible-utils-0.0.24/man' make[3]: Entering directory '/build/reproducible-path/sensible-utils-0.0.24/man' make[3]: Nothing to be done for 'man-once'. make[3]: Leaving directory '/build/reproducible-path/sensible-utils-0.0.24/man' make[3]: Entering directory '/build/reproducible-path/sensible-utils-0.0.24/man' make[3]: Nothing to be done for 'man-once'. make[3]: Leaving directory '/build/reproducible-path/sensible-utils-0.0.24/man' make[3]: Entering directory '/build/reproducible-path/sensible-utils-0.0.24/man' make[3]: Nothing to be done for 'man-once'. sed -f ./utf8toman.sed -e 's/%PACKAGE%/sensible-utils/g' -e 's/%VERSION%/0.0.21/g' -e 's/%RELEASE_DATE%//g' -e 's:%CONFDIR%:/etc:g' -e 's:%LOGDIR%::g' -e 's:%ADMINDIR%::g' -e 's:%PKGDOCDIR%:/usr/share/doc/sensible-utils:g' -e 's:%PKGCONFDIR%::g' -e 's:%PKGLIBDIR%:/usr/libexec/sensible-utils:g' -e 's:%PKGDATADIR%:/usr/share/sensible-utils:g' pl/sensible-editor.man >pl/sensible-editor.1 make[3]: Leaving directory '/build/reproducible-path/sensible-utils-0.0.24/man' make[3]: Entering directory '/build/reproducible-path/sensible-utils-0.0.24/man' make[3]: Nothing to be done for 'man-once'. sed -f ./utf8toman.sed -e 's/%PACKAGE%/sensible-utils/g' -e 's/%VERSION%/0.0.21/g' -e 's/%RELEASE_DATE%//g' -e 's:%CONFDIR%:/etc:g' -e 's:%LOGDIR%::g' -e 's:%ADMINDIR%::g' -e 's:%PKGDOCDIR%:/usr/share/doc/sensible-utils:g' -e 's:%PKGCONFDIR%::g' -e 's:%PKGLIBDIR%:/usr/libexec/sensible-utils:g' -e 's:%PKGDATADIR%:/usr/share/sensible-utils:g' pt/sensible-browser.man >pt/sensible-browser.1 sed -f ./utf8toman.sed -e 's/%PACKAGE%/sensible-utils/g' -e 's/%VERSION%/0.0.21/g' -e 's/%RELEASE_DATE%//g' -e 's:%CONFDIR%:/etc:g' -e 's:%LOGDIR%::g' -e 's:%ADMINDIR%::g' -e 's:%PKGDOCDIR%:/usr/share/doc/sensible-utils:g' -e 's:%PKGCONFDIR%::g' -e 's:%PKGLIBDIR%:/usr/libexec/sensible-utils:g' -e 's:%PKGDATADIR%:/usr/share/sensible-utils:g' pt/sensible-pager.man >pt/sensible-pager.1 sed -f ./utf8toman.sed -e 's/%PACKAGE%/sensible-utils/g' -e 's/%VERSION%/0.0.21/g' -e 's/%RELEASE_DATE%//g' -e 's:%CONFDIR%:/etc:g' -e 's:%LOGDIR%::g' -e 's:%ADMINDIR%::g' -e 's:%PKGDOCDIR%:/usr/share/doc/sensible-utils:g' -e 's:%PKGCONFDIR%::g' -e 's:%PKGLIBDIR%:/usr/libexec/sensible-utils:g' -e 's:%PKGDATADIR%:/usr/share/sensible-utils:g' pt/select-editor.man >pt/select-editor.1 make[3]: Leaving directory '/build/reproducible-path/sensible-utils-0.0.24/man' make[2]: Leaving directory '/build/reproducible-path/sensible-utils-0.0.24/man' make[2]: Entering directory '/build/reproducible-path/sensible-utils-0.0.24' make[2]: Nothing to be done for 'all-am'. make[2]: Leaving directory '/build/reproducible-path/sensible-utils-0.0.24' make[1]: Leaving directory '/build/reproducible-path/sensible-utils-0.0.24' debian/rules override_dh_auto_test make[1]: Entering directory '/build/reproducible-path/sensible-utils-0.0.24' make check make[2]: Entering directory '/build/reproducible-path/sensible-utils-0.0.24' Making check in man make[3]: Entering directory '/build/reproducible-path/sensible-utils-0.0.24/man' for lang in `sed -ne 's/^.*\[po4a_langs\] \(.*\)$/\1/p' ./po4a/po4a.cfg`; do \ files=""; \ for man in sensible-editor.1 sensible-browser.1 sensible-pager.1 select-editor.1 sensible-terminal.1; do \ trans="${man%%.[0-9]}.man"; \ if [ -f ./$lang/$trans ]; then \ files="$files ./$lang/$man"; \ elif [ -f ./$lang/$trans ]; then \ files="$files ./$lang/$man"; \ fi; \ done; \ make mandir="/usr/share/man/$lang" man_MANS="" man-once $files; \ done make[4]: Entering directory '/build/reproducible-path/sensible-utils-0.0.24/man' make[4]: Nothing to be done for 'man-once'. make[4]: Leaving directory '/build/reproducible-path/sensible-utils-0.0.24/man' make[4]: Entering directory '/build/reproducible-path/sensible-utils-0.0.24/man' make[4]: Nothing to be done for 'man-once'. make[4]: 'de/sensible-editor.1' is up to date. make[4]: 'de/sensible-browser.1' is up to date. make[4]: 'de/sensible-pager.1' is up to date. make[4]: 'de/select-editor.1' is up to date. make[4]: 'de/sensible-terminal.1' is up to date. make[4]: Leaving directory '/build/reproducible-path/sensible-utils-0.0.24/man' make[4]: Entering directory '/build/reproducible-path/sensible-utils-0.0.24/man' make[4]: Nothing to be done for 'man-once'. make[4]: Leaving directory '/build/reproducible-path/sensible-utils-0.0.24/man' make[4]: Entering directory '/build/reproducible-path/sensible-utils-0.0.24/man' make[4]: Nothing to be done for 'man-once'. make[4]: 'fr/sensible-editor.1' is up to date. make[4]: 'fr/sensible-browser.1' is up to date. make[4]: 'fr/sensible-pager.1' is up to date. make[4]: 'fr/select-editor.1' is up to date. make[4]: 'fr/sensible-terminal.1' is up to date. make[4]: Leaving directory '/build/reproducible-path/sensible-utils-0.0.24/man' make[4]: Entering directory '/build/reproducible-path/sensible-utils-0.0.24/man' make[4]: Nothing to be done for 'man-once'. make[4]: Leaving directory '/build/reproducible-path/sensible-utils-0.0.24/man' make[4]: Entering directory '/build/reproducible-path/sensible-utils-0.0.24/man' make[4]: Nothing to be done for 'man-once'. make[4]: Leaving directory '/build/reproducible-path/sensible-utils-0.0.24/man' make[4]: Entering directory '/build/reproducible-path/sensible-utils-0.0.24/man' make[4]: Nothing to be done for 'man-once'. make[4]: 'pl/sensible-editor.1' is up to date. make[4]: Leaving directory '/build/reproducible-path/sensible-utils-0.0.24/man' make[4]: Entering directory '/build/reproducible-path/sensible-utils-0.0.24/man' make[4]: Nothing to be done for 'man-once'. make[4]: 'pt/sensible-browser.1' is up to date. make[4]: 'pt/sensible-pager.1' is up to date. make[4]: 'pt/select-editor.1' is up to date. make[4]: Leaving directory '/build/reproducible-path/sensible-utils-0.0.24/man' make[3]: Leaving directory '/build/reproducible-path/sensible-utils-0.0.24/man' make[3]: Entering directory '/build/reproducible-path/sensible-utils-0.0.24' make check-TESTS make[4]: Entering directory '/build/reproducible-path/sensible-utils-0.0.24' make[5]: Entering directory '/build/reproducible-path/sensible-utils-0.0.24' PASS: test/ed-as-sensible-editor PASS: test/echo-as-browser PASS: test/echo-as-terminal PASS: test/ed-as-visual PASS: test/ed-as-fallback PASS: test/error-out PASS: test/fork-bomb PASS: test/shell-script PASS: test/failure-propagation PASS: test/echo-as-pager PASS: test/empty PASS: test/whitespace-preserved SKIP: test/shellcheck ============================================================================ Testsuite summary for sensible-utils 0.0.21 ============================================================================ # TOTAL: 13 # PASS: 12 # SKIP: 1 # XFAIL: 0 # FAIL: 0 # XPASS: 0 # ERROR: 0 ============================================================================ make[5]: Leaving directory '/build/reproducible-path/sensible-utils-0.0.24' make[4]: Leaving directory '/build/reproducible-path/sensible-utils-0.0.24' make[3]: Leaving directory '/build/reproducible-path/sensible-utils-0.0.24' make[2]: Leaving directory '/build/reproducible-path/sensible-utils-0.0.24' make[1]: Leaving directory '/build/reproducible-path/sensible-utils-0.0.24' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/sensible-utils/ make -j5 install DESTDIR=/build/reproducible-path/sensible-utils-0.0.24/debian/sensible-utils AM_UPDATE_INFO_DIR=no make[1]: Entering directory '/build/reproducible-path/sensible-utils-0.0.24' Making install in man make[2]: Entering directory '/build/reproducible-path/sensible-utils-0.0.24/man' for lang in `sed -ne 's/^.*\[po4a_langs\] \(.*\)$/\1/p' ./po4a/po4a.cfg`; do \ files=""; \ for man in sensible-editor.1 sensible-browser.1 sensible-pager.1 select-editor.1 sensible-terminal.1; do \ trans="${man%%.[0-9]}.man"; \ if [ -f ./$lang/$trans ]; then \ files="$files ./$lang/$man"; \ elif [ -f ./$lang/$trans ]; then \ files="$files ./$lang/$man"; \ fi; \ done; \ make mandir="/usr/share/man/$lang" man_MANS="" man-once $files; \ done make[3]: Entering directory '/build/reproducible-path/sensible-utils-0.0.24/man' make[3]: Nothing to be done for 'man-once'. make[3]: Leaving directory '/build/reproducible-path/sensible-utils-0.0.24/man' make[3]: Entering directory '/build/reproducible-path/sensible-utils-0.0.24/man' make[3]: Nothing to be done for 'man-once'. make[3]: 'de/sensible-editor.1' is up to date. make[3]: 'de/sensible-browser.1' is up to date. make[3]: 'de/sensible-pager.1' is up to date. make[3]: 'de/select-editor.1' is up to date. make[3]: 'de/sensible-terminal.1' is up to date. make[3]: Leaving directory '/build/reproducible-path/sensible-utils-0.0.24/man' make[3]: Entering directory '/build/reproducible-path/sensible-utils-0.0.24/man' make[3]: Nothing to be done for 'man-once'. make[3]: Leaving directory '/build/reproducible-path/sensible-utils-0.0.24/man' make[3]: Entering directory '/build/reproducible-path/sensible-utils-0.0.24/man' make[3]: Nothing to be done for 'man-once'. make[3]: 'fr/sensible-editor.1' is up to date. make[3]: 'fr/sensible-browser.1' is up to date. make[3]: 'fr/sensible-pager.1' is up to date. make[3]: 'fr/select-editor.1' is up to date. make[3]: 'fr/sensible-terminal.1' is up to date. make[3]: Leaving directory '/build/reproducible-path/sensible-utils-0.0.24/man' make[3]: Entering directory '/build/reproducible-path/sensible-utils-0.0.24/man' make[3]: Nothing to be done for 'man-once'. make[3]: Leaving directory '/build/reproducible-path/sensible-utils-0.0.24/man' make[3]: Entering directory '/build/reproducible-path/sensible-utils-0.0.24/man' make[3]: Nothing to be done for 'man-once'. make[3]: Leaving directory '/build/reproducible-path/sensible-utils-0.0.24/man' make[3]: Entering directory '/build/reproducible-path/sensible-utils-0.0.24/man' make[3]: Nothing to be done for 'man-once'. make[3]: 'pl/sensible-editor.1' is up to date. make[3]: Leaving directory '/build/reproducible-path/sensible-utils-0.0.24/man' make[3]: Entering directory '/build/reproducible-path/sensible-utils-0.0.24/man' make[3]: Nothing to be done for 'man-once'. make[3]: 'pt/sensible-browser.1' is up to date. make[3]: 'pt/sensible-pager.1' is up to date. make[3]: 'pt/select-editor.1' is up to date. make[3]: Leaving directory '/build/reproducible-path/sensible-utils-0.0.24/man' make[3]: Entering directory '/build/reproducible-path/sensible-utils-0.0.24/man' make[3]: Nothing to be done for 'install-exec-am'. for lang in `sed -ne 's/^.*\[po4a_langs\] \(.*\)$/\1/p' ./po4a/po4a.cfg`; do \ files=""; \ for man in sensible-editor.1 sensible-browser.1 sensible-pager.1 select-editor.1 sensible-terminal.1; do \ trans="${man%%.[0-9]}.man"; \ if [ -f ./$lang/$trans ]; then \ files="$files ./$lang/$man"; \ elif [ -f ./$lang/$trans ]; then \ files="$files ./$lang/$man"; \ fi; \ done; \ make install-man mandir="/usr/share/man/$lang" man_MANS="$files"; \ done /usr/bin/mkdir -p '/build/reproducible-path/sensible-utils-0.0.24/debian/sensible-utils/usr/share/man/man1' make[4]: Entering directory '/build/reproducible-path/sensible-utils-0.0.24/man' make[4]: Leaving directory '/build/reproducible-path/sensible-utils-0.0.24/man' /usr/bin/install -c -m 644 sensible-editor.1 sensible-browser.1 sensible-pager.1 select-editor.1 sensible-terminal.1 '/build/reproducible-path/sensible-utils-0.0.24/debian/sensible-utils/usr/share/man/man1' make[4]: Entering directory '/build/reproducible-path/sensible-utils-0.0.24/man' /usr/bin/mkdir -p '/build/reproducible-path/sensible-utils-0.0.24/debian/sensible-utils/usr/share/man/de/man1' /usr/bin/install -c -m 644 ./de/sensible-editor.1 ./de/sensible-browser.1 ./de/sensible-pager.1 ./de/select-editor.1 ./de/sensible-terminal.1 '/build/reproducible-path/sensible-utils-0.0.24/debian/sensible-utils/usr/share/man/de/man1' make[4]: Leaving directory '/build/reproducible-path/sensible-utils-0.0.24/man' make[4]: Entering directory '/build/reproducible-path/sensible-utils-0.0.24/man' make[4]: Leaving directory '/build/reproducible-path/sensible-utils-0.0.24/man' make[4]: Entering directory '/build/reproducible-path/sensible-utils-0.0.24/man' /usr/bin/mkdir -p '/build/reproducible-path/sensible-utils-0.0.24/debian/sensible-utils/usr/share/man/fr/man1' /usr/bin/install -c -m 644 ./fr/sensible-editor.1 ./fr/sensible-browser.1 ./fr/sensible-pager.1 ./fr/select-editor.1 ./fr/sensible-terminal.1 '/build/reproducible-path/sensible-utils-0.0.24/debian/sensible-utils/usr/share/man/fr/man1' make[4]: Leaving directory '/build/reproducible-path/sensible-utils-0.0.24/man' make[4]: Entering directory '/build/reproducible-path/sensible-utils-0.0.24/man' make[4]: Leaving directory '/build/reproducible-path/sensible-utils-0.0.24/man' make[4]: Entering directory '/build/reproducible-path/sensible-utils-0.0.24/man' make[4]: Leaving directory '/build/reproducible-path/sensible-utils-0.0.24/man' make[4]: Entering directory '/build/reproducible-path/sensible-utils-0.0.24/man' /usr/bin/mkdir -p '/build/reproducible-path/sensible-utils-0.0.24/debian/sensible-utils/usr/share/man/pl/man1' /usr/bin/install -c -m 644 ./pl/sensible-editor.1 '/build/reproducible-path/sensible-utils-0.0.24/debian/sensible-utils/usr/share/man/pl/man1' make[4]: Leaving directory '/build/reproducible-path/sensible-utils-0.0.24/man' make[4]: Entering directory '/build/reproducible-path/sensible-utils-0.0.24/man' /usr/bin/mkdir -p '/build/reproducible-path/sensible-utils-0.0.24/debian/sensible-utils/usr/share/man/pt/man1' /usr/bin/install -c -m 644 ./pt/sensible-browser.1 ./pt/sensible-pager.1 ./pt/select-editor.1 '/build/reproducible-path/sensible-utils-0.0.24/debian/sensible-utils/usr/share/man/pt/man1' make[4]: Leaving directory '/build/reproducible-path/sensible-utils-0.0.24/man' make[3]: Leaving directory '/build/reproducible-path/sensible-utils-0.0.24/man' make[2]: Leaving directory '/build/reproducible-path/sensible-utils-0.0.24/man' make[2]: Entering directory '/build/reproducible-path/sensible-utils-0.0.24' make[3]: Entering directory '/build/reproducible-path/sensible-utils-0.0.24' make[3]: Nothing to be done for 'install-data-am'. /usr/bin/mkdir -p '/build/reproducible-path/sensible-utils-0.0.24/debian/sensible-utils/usr/bin' /usr/bin/install -c sensible-browser sensible-editor sensible-pager select-editor sensible-terminal '/build/reproducible-path/sensible-utils-0.0.24/debian/sensible-utils/usr/bin' make[3]: Leaving directory '/build/reproducible-path/sensible-utils-0.0.24' make[2]: Leaving directory '/build/reproducible-path/sensible-utils-0.0.24' make[1]: Leaving directory '/build/reproducible-path/sensible-utils-0.0.24' dh_installdocs dh_installchangelogs dh_installman dh_installmime dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'sensible-utils' in '../sensible-utils_0.0.24_all.deb'. dpkg-genbuildinfo --build=binary -O../sensible-utils_0.0.24_armhf.buildinfo dpkg-genchanges --build=binary -O../sensible-utils_0.0.24_armhf.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: including full source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/26806 and its subdirectories I: Current time: Wed Jul 10 02:06:38 -12 2024 I: pbuilder-time-stamp: 1720620398 Wed Jul 10 14:06:47 UTC 2024 I: 1st build successful. Starting 2nd build on remote node virt32a-armhf-rb.debian.net. Wed Jul 10 14:06:47 UTC 2024 I: Preparing to do remote build '2' on virt32a-armhf-rb.debian.net. Wed Jul 10 14:07:57 UTC 2024 I: Deleting $TMPDIR on virt32a-armhf-rb.debian.net. Wed Jul 10 14:08:00 UTC 2024 I: sensible-utils_0.0.24_armhf.changes: Format: 1.8 Date: Mon, 24 Jun 2024 19:12:44 +0000 Source: sensible-utils Binary: sensible-utils Architecture: all Version: 0.0.24 Distribution: unstable Urgency: medium Maintainer: Anibal Monsalve Salazar Changed-By: Bastien Roucariès Description: sensible-utils - Utilities for sensible alternative selection Closes: 1074066 Changes: sensible-utils (0.0.24) unstable; urgency=medium . * Bug fix: "sensible-pager does not work with PAGER=sensible-pager", thanks to Oswald Buddenhagen (Closes: #1074066). Continue to next choice in case of recursion. Checksums-Sha1: a3a4525073551b03a55b148f5a118ccbb1991bf3 24840 sensible-utils_0.0.24_all.deb f7964dc5445a7854ba4770d71173a9d8b15b0bbf 4854 sensible-utils_0.0.24_armhf.buildinfo Checksums-Sha256: b8841f7907fd3114961285efc5b2cec55c32d434d24787ef598ca4f4736ec356 24840 sensible-utils_0.0.24_all.deb 11355e47239cea0b9c8f682cd6bd3520d690bf5989381f334f825848b1c2b780 4854 sensible-utils_0.0.24_armhf.buildinfo Files: 6d73b3457e467b5e40b973c880bef1c8 24840 utils required sensible-utils_0.0.24_all.deb c169ea99ecb3597e76cf52145601c542 4854 utils required sensible-utils_0.0.24_armhf.buildinfo Wed Jul 10 14:08:01 UTC 2024 I: diffoscope 272 will be used to compare the two builds: Running as unit: rb-diffoscope-armhf_18-6287.service Warning: program compiled against libxml 212 using older 209 # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.Af9tjva6/sensible-utils_0.0.24.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.Af9tjva6/sensible-utils_0.0.24.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.Af9tjva6/sensible-utils_0.0.24.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.Af9tjva6/b1/sensible-utils_0.0.24_armhf.changes /srv/reproducible-results/rbuild-debian/r-b-build.Af9tjva6/b2/sensible-utils_0.0.24_armhf.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.376s) 0.376s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.016s) 0.016s 12 calls diffoscope.comparators.binary.FilesystemFile ## specialize (total time: 0.000s) 0.000s 1 call specialize Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 719ms CPU time consumed: 716ms Wed Jul 10 14:08:02 UTC 2024 I: diffoscope 272 found no differences in the changes files, and a .buildinfo file also exists. Wed Jul 10 14:08:02 UTC 2024 I: sensible-utils from trixie built successfully and reproducibly on armhf. Wed Jul 10 14:08:03 UTC 2024 I: Submitting .buildinfo files to external archives: Wed Jul 10 14:08:03 UTC 2024 I: Submitting 8.0K b1/sensible-utils_0.0.24_armhf.buildinfo.asc Wed Jul 10 14:08:04 UTC 2024 I: Submitting 8.0K b2/sensible-utils_0.0.24_armhf.buildinfo.asc Wed Jul 10 14:08:05 UTC 2024 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Wed Jul 10 14:08:05 UTC 2024 I: Done submitting .buildinfo files. Wed Jul 10 14:08:05 UTC 2024 I: Removing signed sensible-utils_0.0.24_armhf.buildinfo.asc files: removed './b1/sensible-utils_0.0.24_armhf.buildinfo.asc' removed './b2/sensible-utils_0.0.24_armhf.buildinfo.asc'