Thu May 30 17:24:34 UTC 2024 I: starting to build rust-podio/trixie/armhf on jenkins on '2024-05-30 17:24' Thu May 30 17:24:34 UTC 2024 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/armhf_22/4096/console.log Thu May 30 17:24:34 UTC 2024 I: Downloading source for trixie/rust-podio=0.1.6-1 --2024-05-30 17:24:34-- http://deb.debian.org/debian/pool/main/r/rust-podio/rust-podio_0.1.6-1.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2033 (2.0K) [text/prs.lines.tag] Saving to: ‘rust-podio_0.1.6-1.dsc’ 0K . 100% 266M=0s 2024-05-30 17:24:34 (266 MB/s) - ‘rust-podio_0.1.6-1.dsc’ saved [2033/2033] Thu May 30 17:24:34 UTC 2024 I: rust-podio_0.1.6-1.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Format: 3.0 (quilt) Source: rust-podio Binary: librust-podio-dev Architecture: any Version: 0.1.6-1 Maintainer: Debian Rust Maintainers Uploaders: Sylvestre Ledru Standards-Version: 4.2.0 Vcs-Browser: https://salsa.debian.org/rust-team/debcargo-conf/tree/master/src/podio Vcs-Git: https://salsa.debian.org/rust-team/debcargo-conf.git [src/podio] Build-Depends: debhelper (>= 11), dh-cargo (>= 10), cargo:native , rustc:native , libstd-rust-dev Package-List: librust-podio-dev deb rust optional arch=any Checksums-Sha1: 87e0d5fd48718c784c5b4b6dc4985816c6bc1e9c 10186 rust-podio_0.1.6.orig.tar.gz 606066818ba6a20f47cb1172e9cf221799a3afac 2368 rust-podio_0.1.6-1.debian.tar.xz Checksums-Sha256: 780fb4b6698bbf9cf2444ea5d22411cef2953f0824b98f33cf454ec5615645bd 10186 rust-podio_0.1.6.orig.tar.gz 5a8a7a054f9607637c0a05712cbaf9a8cff3f0a357523a9131ec297b1ea9d8c8 2368 rust-podio_0.1.6-1.debian.tar.xz Files: 7261ce43635fd9c2a009810db04d6901 10186 rust-podio_0.1.6.orig.tar.gz a67cbeff6f84e3c8746ab2d8e4789d68 2368 rust-podio_0.1.6-1.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQIzBAEBCAAdFiEEtg21mU05vsTRqVzPfmUo2nUvG+EFAlvDFMsACgkQfmUo2nUv G+HPHw/+MaYX7mHHYruDmKlckzKqXLhMki6rICDqt1VHhgpksaBZUlI30SQjs56c QuXzzW78XAQ5OlTZO4eswd48pQYWO+uln30fcyhpBmBoqA6jdn2d0xbQxmxaqkSk UBvk43Xv+IF+e4Pcc4kDXIpZSSN/3q8QnJJXC8UtpMGs6Y0AeQEhZoU21IPSJZHd 4zlbIK6A7hsGp3+SYkUWpRfjAVSD5Ma4XsUhTQ2DfKyU6ME6pb24/kvcW966eHEr n0IJOmlgbOsz2wAaB10w5xbSLy6hBiyemPyON1ncpg2KB4XZvdRKyljUhS1HLmkd ueQzwCJrDaZGIdOXQWW3FadFFQsFeL9aHXe/IX7tD/RuThaFilKIHC0+xqvsmwFn PXQbbkpwlIp6UVnAn2lJs/3nY02dgPeMMHwF92doAgXp2Xve+LnQV0FlkHOYMzlO oxCRNRXbwgseaZDt+poyjwe2Mcl2JFHemkwbwoyz05ljVDNHcyJc5nZyU+oVkpes Yd4xTnVszjpkMAcxNEzXNj1t1tjnb+nHEARDhJ3/v41Y8507+acdCGTLTijM/XGM TKqPUZl69W77ihbUy5xa8YJ7aUPhn7/LzL7j1ck5ypkGh1CSURJsCKMvUo5yXv6I XIODNsjnuyGCekytGF8PhSWa3wRFnHazT1fG5USKT3gyZUljHlA= =zrK2 -----END PGP SIGNATURE----- Thu May 30 17:24:34 UTC 2024 I: Checking whether the package is not for us Thu May 30 17:24:34 UTC 2024 I: Starting 1st build on remote node cbxi4b-armhf-rb.debian.net. Thu May 30 17:24:34 UTC 2024 I: Preparing to do remote build '1' on cbxi4b-armhf-rb.debian.net. Thu May 30 17:28:30 UTC 2024 I: Deleting $TMPDIR on cbxi4b-armhf-rb.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Thu May 30 05:24:44 -12 2024 I: pbuilder-time-stamp: 1717089884 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [rust-podio_0.1.6-1.dsc] I: copying [./rust-podio_0.1.6.orig.tar.gz] I: copying [./rust-podio_0.1.6-1.debian.tar.xz] I: Extracting source gpgv: Signature made Sun Oct 14 10:04:59 2018 gpgv: using RSA key B60DB5994D39BEC4D1A95CCF7E6528DA752F1BE1 gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./rust-podio_0.1.6-1.dsc: no acceptable signature found dpkg-source: info: extracting rust-podio in rust-podio-0.1.6 dpkg-source: info: unpacking rust-podio_0.1.6.orig.tar.gz dpkg-source: info: unpacking rust-podio_0.1.6-1.debian.tar.xz I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/19989/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='armhf' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=3 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='armhf' IFS=' ' INVOCATION_ID='42e5ce528ed245e19f8f3fadf0ed4d3b' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='19989' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.aMGPjKJc/pbuilderrc_6lOs --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.aMGPjKJc/b1 --logfile b1/build.log rust-podio_0.1.6-1.dsc' SUDO_GID='116' SUDO_UID='112' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://10.0.0.15:3142/' I: uname -a Linux cbxi4b 6.1.0-21-armmp #1 SMP Debian 6.1.90-1 (2024-05-03) armv7l GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 May 26 11:27 /bin -> usr/bin I: user script /srv/workspace/pbuilder/19989/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: armhf Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper (>= 11), dh-cargo (>= 10), cargo:native, rustc:native, libstd-rust-dev dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19444 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper (>= 11); however: Package debhelper is not installed. pbuilder-satisfydepends-dummy depends on dh-cargo (>= 10); however: Package dh-cargo is not installed. pbuilder-satisfydepends-dummy depends on cargo:native. pbuilder-satisfydepends-dummy depends on rustc:native. pbuilder-satisfydepends-dummy depends on libstd-rust-dev; however: Package libstd-rust-dev is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} cargo{a} debhelper{a} dh-autoreconf{a} dh-cargo{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libbrotli1{a} libbsd0{a} libcom-err2{a} libcurl4t64{a} libdebhelper-perl{a} libedit2{a} libelf1t64{a} libexpat1{a} libfile-stripnondeterminism-perl{a} libgit2-1.7{a} libgssapi-krb5-2{a} libhttp-parser2.9{a} libicu72{a} libk5crypto3{a} libkeyutils1{a} libkrb5-3{a} libkrb5support0{a} libldap-2.5-0{a} libllvm16t64{a} libmagic-mgc{a} libmagic1t64{a} libmbedcrypto7t64{a} libmbedtls14t64{a} libmbedx509-1t64{a} libnghttp2-14{a} libpipeline1{a} libpsl5t64{a} libpython3-stdlib{a} libpython3.11-minimal{a} libpython3.11-stdlib{a} libreadline8t64{a} librtmp1{a} libsasl2-2{a} libsasl2-modules-db{a} libssh2-1t64{a} libstd-rust-1.71{a} libstd-rust-dev{a} libtool{a} libuchardet0{a} libxml2{a} libz3-4{a} m4{a} man-db{a} media-types{a} netbase{a} po-debconf{a} python3{a} python3-minimal{a} python3.11{a} python3.11-minimal{a} readline-common{a} rustc{a} sensible-utils{a} tzdata{a} The following packages are RECOMMENDED but will NOT be installed: ca-certificates curl krb5-locales libarchive-cpio-perl libldap-common libltdl-dev libmail-sendmail-perl libsasl2-modules lynx publicsuffix rust-llvm wget 0 packages upgraded, 71 newly installed, 0 to remove and 0 not upgraded. Need to get 112 MB of archives. After unpacking 468 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main armhf libpython3.11-minimal armhf 3.11.9-1 [805 kB] Get: 2 http://deb.debian.org/debian trixie/main armhf libexpat1 armhf 2.6.2-1 [83.5 kB] Get: 3 http://deb.debian.org/debian trixie/main armhf python3.11-minimal armhf 3.11.9-1 [1600 kB] Get: 4 http://deb.debian.org/debian trixie/main armhf python3-minimal armhf 3.11.8-1 [26.3 kB] Get: 5 http://deb.debian.org/debian trixie/main armhf media-types all 10.1.0 [26.9 kB] Get: 6 http://deb.debian.org/debian trixie/main armhf netbase all 6.4 [12.8 kB] Get: 7 http://deb.debian.org/debian trixie/main armhf tzdata all 2024a-4 [255 kB] Get: 8 http://deb.debian.org/debian trixie/main armhf readline-common all 8.2-4 [69.3 kB] Get: 9 http://deb.debian.org/debian trixie/main armhf libreadline8t64 armhf 8.2-4 [145 kB] Get: 10 http://deb.debian.org/debian trixie/main armhf libpython3.11-stdlib armhf 3.11.9-1 [1704 kB] Get: 11 http://deb.debian.org/debian trixie/main armhf python3.11 armhf 3.11.9-1 [602 kB] Get: 12 http://deb.debian.org/debian trixie/main armhf libpython3-stdlib armhf 3.11.8-1 [9332 B] Get: 13 http://deb.debian.org/debian trixie/main armhf python3 armhf 3.11.8-1 [27.4 kB] Get: 14 http://deb.debian.org/debian trixie/main armhf sensible-utils all 0.0.22 [22.4 kB] Get: 15 http://deb.debian.org/debian trixie/main armhf libmagic-mgc armhf 1:5.45-3 [314 kB] Get: 16 http://deb.debian.org/debian trixie/main armhf libmagic1t64 armhf 1:5.45-3 [98.1 kB] Get: 17 http://deb.debian.org/debian trixie/main armhf file armhf 1:5.45-3 [42.0 kB] Get: 18 http://deb.debian.org/debian trixie/main armhf gettext-base armhf 0.21-14+b1 [157 kB] Get: 19 http://deb.debian.org/debian trixie/main armhf libuchardet0 armhf 0.0.8-1+b1 [65.7 kB] Get: 20 http://deb.debian.org/debian trixie/main armhf groff-base armhf 1.23.0-4 [1090 kB] Get: 21 http://deb.debian.org/debian trixie/main armhf bsdextrautils armhf 2.40.1-2 [85.7 kB] Get: 22 http://deb.debian.org/debian trixie/main armhf libpipeline1 armhf 1.5.7-2 [33.3 kB] Get: 23 http://deb.debian.org/debian trixie/main armhf man-db armhf 2.12.1-1 [1375 kB] Get: 24 http://deb.debian.org/debian trixie/main armhf m4 armhf 1.4.19-4 [264 kB] Get: 25 http://deb.debian.org/debian trixie/main armhf autoconf all 2.71-3 [332 kB] Get: 26 http://deb.debian.org/debian trixie/main armhf autotools-dev all 20220109.1 [51.6 kB] Get: 27 http://deb.debian.org/debian trixie/main armhf automake all 1:1.16.5-1.3 [823 kB] Get: 28 http://deb.debian.org/debian trixie/main armhf autopoint all 0.21-14 [496 kB] Get: 29 http://deb.debian.org/debian trixie/main armhf libbrotli1 armhf 1.1.0-2+b3 [284 kB] Get: 30 http://deb.debian.org/debian trixie/main armhf libkrb5support0 armhf 1.20.1-6+b1 [30.6 kB] Get: 31 http://deb.debian.org/debian trixie/main armhf libcom-err2 armhf 1.47.1-1 [22.1 kB] Get: 32 http://deb.debian.org/debian trixie/main armhf libk5crypto3 armhf 1.20.1-6+b1 [75.5 kB] Get: 33 http://deb.debian.org/debian trixie/main armhf libkeyutils1 armhf 1.6.3-3 [7908 B] Get: 34 http://deb.debian.org/debian trixie/main armhf libkrb5-3 armhf 1.20.1-6+b1 [290 kB] Get: 35 http://deb.debian.org/debian trixie/main armhf libgssapi-krb5-2 armhf 1.20.1-6+b1 [112 kB] Get: 36 http://deb.debian.org/debian trixie/main armhf libsasl2-modules-db armhf 2.1.28+dfsg1-6 [18.0 kB] Get: 37 http://deb.debian.org/debian trixie/main armhf libsasl2-2 armhf 2.1.28+dfsg1-6 [50.1 kB] Get: 38 http://deb.debian.org/debian trixie/main armhf libldap-2.5-0 armhf 2.5.17+dfsg-1 [161 kB] Get: 39 http://deb.debian.org/debian trixie/main armhf libnghttp2-14 armhf 1.61.0-1+b1 [64.1 kB] Get: 40 http://deb.debian.org/debian trixie/main armhf libpsl5t64 armhf 0.21.2-1.1 [55.6 kB] Get: 41 http://deb.debian.org/debian trixie/main armhf librtmp1 armhf 2.4+20151223.gitfa8646d.1-2+b4 [53.2 kB] Get: 42 http://deb.debian.org/debian trixie/main armhf libssh2-1t64 armhf 1.11.0-5 [199 kB] Get: 43 http://deb.debian.org/debian trixie/main armhf libcurl4t64 armhf 8.8.0-1 [394 kB] Get: 44 http://deb.debian.org/debian trixie/main armhf libhttp-parser2.9 armhf 2.9.4-6+b1 [19.8 kB] Get: 45 http://deb.debian.org/debian trixie/main armhf libmbedcrypto7t64 armhf 2.28.8-1 [251 kB] Get: 46 http://deb.debian.org/debian trixie/main armhf libmbedx509-1t64 armhf 2.28.8-1 [127 kB] Get: 47 http://deb.debian.org/debian trixie/main armhf libmbedtls14t64 armhf 2.28.8-1 [158 kB] Get: 48 http://deb.debian.org/debian trixie/main armhf libgit2-1.7 armhf 1.7.2+ds-1+b2 [448 kB] Get: 49 http://deb.debian.org/debian trixie/main armhf libbsd0 armhf 0.12.2-1 [127 kB] Get: 50 http://deb.debian.org/debian trixie/main armhf libedit2 armhf 3.1-20240517-1 [77.7 kB] Get: 51 http://deb.debian.org/debian trixie/main armhf libicu72 armhf 72.1-4+b1 [9070 kB] Get: 52 http://deb.debian.org/debian trixie/main armhf libxml2 armhf 2.9.14+dfsg-1.3+b3 [598 kB] Get: 53 http://deb.debian.org/debian trixie/main armhf libz3-4 armhf 4.8.12-3.1+b2 [6324 kB] Get: 54 http://deb.debian.org/debian trixie/main armhf libllvm16t64 armhf 1:16.0.6-27 [20.6 MB] Get: 55 http://deb.debian.org/debian trixie/main armhf libstd-rust-1.71 armhf 1.71.1+dfsg1-2 [16.9 MB] Get: 56 http://deb.debian.org/debian trixie/main armhf libstd-rust-dev armhf 1.71.1+dfsg1-2 [34.6 MB] Get: 57 http://deb.debian.org/debian trixie/main armhf rustc armhf 1.71.1+dfsg1-2 [2694 kB] Get: 58 http://deb.debian.org/debian trixie/main armhf cargo armhf 1.71.1+dfsg1-2 [3987 kB] Get: 59 http://deb.debian.org/debian trixie/main armhf libdebhelper-perl all 13.15.3 [88.0 kB] Get: 60 http://deb.debian.org/debian trixie/main armhf libtool all 2.4.7-7 [517 kB] Get: 61 http://deb.debian.org/debian trixie/main armhf dh-autoreconf all 20 [17.1 kB] Get: 62 http://deb.debian.org/debian trixie/main armhf libarchive-zip-perl all 1.68-1 [104 kB] Get: 63 http://deb.debian.org/debian trixie/main armhf libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get: 64 http://deb.debian.org/debian trixie/main armhf dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get: 65 http://deb.debian.org/debian trixie/main armhf libelf1t64 armhf 0.191-1+b1 [183 kB] Get: 66 http://deb.debian.org/debian trixie/main armhf dwz armhf 0.15-1+b2 [106 kB] Get: 67 http://deb.debian.org/debian trixie/main armhf gettext armhf 0.21-14+b1 [1230 kB] Get: 68 http://deb.debian.org/debian trixie/main armhf intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 69 http://deb.debian.org/debian trixie/main armhf po-debconf all 1.0.21+nmu1 [248 kB] Get: 70 http://deb.debian.org/debian trixie/main armhf debhelper all 13.15.3 [901 kB] Get: 71 http://deb.debian.org/debian trixie/main armhf dh-cargo all 31 [10.3 kB] Fetched 112 MB in 14s (8017 kB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package libpython3.11-minimal:armhf. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19444 files and directories currently installed.) Preparing to unpack .../libpython3.11-minimal_3.11.9-1_armhf.deb ... Unpacking libpython3.11-minimal:armhf (3.11.9-1) ... Selecting previously unselected package libexpat1:armhf. Preparing to unpack .../libexpat1_2.6.2-1_armhf.deb ... Unpacking libexpat1:armhf (2.6.2-1) ... Selecting previously unselected package python3.11-minimal. Preparing to unpack .../python3.11-minimal_3.11.9-1_armhf.deb ... Unpacking python3.11-minimal (3.11.9-1) ... Setting up libpython3.11-minimal:armhf (3.11.9-1) ... Setting up libexpat1:armhf (2.6.2-1) ... Setting up python3.11-minimal (3.11.9-1) ... Selecting previously unselected package python3-minimal. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19760 files and directories currently installed.) Preparing to unpack .../0-python3-minimal_3.11.8-1_armhf.deb ... Unpacking python3-minimal (3.11.8-1) ... Selecting previously unselected package media-types. Preparing to unpack .../1-media-types_10.1.0_all.deb ... Unpacking media-types (10.1.0) ... Selecting previously unselected package netbase. Preparing to unpack .../2-netbase_6.4_all.deb ... Unpacking netbase (6.4) ... Selecting previously unselected package tzdata. Preparing to unpack .../3-tzdata_2024a-4_all.deb ... Unpacking tzdata (2024a-4) ... Selecting previously unselected package readline-common. Preparing to unpack .../4-readline-common_8.2-4_all.deb ... Unpacking readline-common (8.2-4) ... Selecting previously unselected package libreadline8t64:armhf. Preparing to unpack .../5-libreadline8t64_8.2-4_armhf.deb ... Adding 'diversion of /lib/arm-linux-gnueabihf/libhistory.so.8 to /lib/arm-linux-gnueabihf/libhistory.so.8.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/arm-linux-gnueabihf/libhistory.so.8.2 to /lib/arm-linux-gnueabihf/libhistory.so.8.2.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/arm-linux-gnueabihf/libreadline.so.8 to /lib/arm-linux-gnueabihf/libreadline.so.8.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/arm-linux-gnueabihf/libreadline.so.8.2 to /lib/arm-linux-gnueabihf/libreadline.so.8.2.usr-is-merged by libreadline8t64' Unpacking libreadline8t64:armhf (8.2-4) ... Selecting previously unselected package libpython3.11-stdlib:armhf. Preparing to unpack .../6-libpython3.11-stdlib_3.11.9-1_armhf.deb ... Unpacking libpython3.11-stdlib:armhf (3.11.9-1) ... Selecting previously unselected package python3.11. Preparing to unpack .../7-python3.11_3.11.9-1_armhf.deb ... Unpacking python3.11 (3.11.9-1) ... Selecting previously unselected package libpython3-stdlib:armhf. Preparing to unpack .../8-libpython3-stdlib_3.11.8-1_armhf.deb ... Unpacking libpython3-stdlib:armhf (3.11.8-1) ... Setting up python3-minimal (3.11.8-1) ... Selecting previously unselected package python3. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20752 files and directories currently installed.) Preparing to unpack .../00-python3_3.11.8-1_armhf.deb ... Unpacking python3 (3.11.8-1) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../01-sensible-utils_0.0.22_all.deb ... Unpacking sensible-utils (0.0.22) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../02-libmagic-mgc_1%3a5.45-3_armhf.deb ... Unpacking libmagic-mgc (1:5.45-3) ... Selecting previously unselected package libmagic1t64:armhf. Preparing to unpack .../03-libmagic1t64_1%3a5.45-3_armhf.deb ... Unpacking libmagic1t64:armhf (1:5.45-3) ... Selecting previously unselected package file. Preparing to unpack .../04-file_1%3a5.45-3_armhf.deb ... Unpacking file (1:5.45-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../05-gettext-base_0.21-14+b1_armhf.deb ... Unpacking gettext-base (0.21-14+b1) ... Selecting previously unselected package libuchardet0:armhf. Preparing to unpack .../06-libuchardet0_0.0.8-1+b1_armhf.deb ... Unpacking libuchardet0:armhf (0.0.8-1+b1) ... Selecting previously unselected package groff-base. Preparing to unpack .../07-groff-base_1.23.0-4_armhf.deb ... Unpacking groff-base (1.23.0-4) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../08-bsdextrautils_2.40.1-2_armhf.deb ... Unpacking bsdextrautils (2.40.1-2) ... Selecting previously unselected package libpipeline1:armhf. Preparing to unpack .../09-libpipeline1_1.5.7-2_armhf.deb ... Unpacking libpipeline1:armhf (1.5.7-2) ... Selecting previously unselected package man-db. Preparing to unpack .../10-man-db_2.12.1-1_armhf.deb ... Unpacking man-db (2.12.1-1) ... Selecting previously unselected package m4. Preparing to unpack .../11-m4_1.4.19-4_armhf.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../12-autoconf_2.71-3_all.deb ... Unpacking autoconf (2.71-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../13-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../14-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../15-autopoint_0.21-14_all.deb ... Unpacking autopoint (0.21-14) ... Selecting previously unselected package libbrotli1:armhf. Preparing to unpack .../16-libbrotli1_1.1.0-2+b3_armhf.deb ... Unpacking libbrotli1:armhf (1.1.0-2+b3) ... Selecting previously unselected package libkrb5support0:armhf. Preparing to unpack .../17-libkrb5support0_1.20.1-6+b1_armhf.deb ... Unpacking libkrb5support0:armhf (1.20.1-6+b1) ... Selecting previously unselected package libcom-err2:armhf. Preparing to unpack .../18-libcom-err2_1.47.1-1_armhf.deb ... Unpacking libcom-err2:armhf (1.47.1-1) ... Selecting previously unselected package libk5crypto3:armhf. Preparing to unpack .../19-libk5crypto3_1.20.1-6+b1_armhf.deb ... Unpacking libk5crypto3:armhf (1.20.1-6+b1) ... Selecting previously unselected package libkeyutils1:armhf. Preparing to unpack .../20-libkeyutils1_1.6.3-3_armhf.deb ... Unpacking libkeyutils1:armhf (1.6.3-3) ... Selecting previously unselected package libkrb5-3:armhf. Preparing to unpack .../21-libkrb5-3_1.20.1-6+b1_armhf.deb ... Unpacking libkrb5-3:armhf (1.20.1-6+b1) ... Selecting previously unselected package libgssapi-krb5-2:armhf. Preparing to unpack .../22-libgssapi-krb5-2_1.20.1-6+b1_armhf.deb ... Unpacking libgssapi-krb5-2:armhf (1.20.1-6+b1) ... Selecting previously unselected package libsasl2-modules-db:armhf. Preparing to unpack .../23-libsasl2-modules-db_2.1.28+dfsg1-6_armhf.deb ... Unpacking libsasl2-modules-db:armhf (2.1.28+dfsg1-6) ... Selecting previously unselected package libsasl2-2:armhf. Preparing to unpack .../24-libsasl2-2_2.1.28+dfsg1-6_armhf.deb ... Unpacking libsasl2-2:armhf (2.1.28+dfsg1-6) ... Selecting previously unselected package libldap-2.5-0:armhf. Preparing to unpack .../25-libldap-2.5-0_2.5.17+dfsg-1_armhf.deb ... Unpacking libldap-2.5-0:armhf (2.5.17+dfsg-1) ... Selecting previously unselected package libnghttp2-14:armhf. Preparing to unpack .../26-libnghttp2-14_1.61.0-1+b1_armhf.deb ... Unpacking libnghttp2-14:armhf (1.61.0-1+b1) ... Selecting previously unselected package libpsl5t64:armhf. Preparing to unpack .../27-libpsl5t64_0.21.2-1.1_armhf.deb ... Unpacking libpsl5t64:armhf (0.21.2-1.1) ... Selecting previously unselected package librtmp1:armhf. Preparing to unpack .../28-librtmp1_2.4+20151223.gitfa8646d.1-2+b4_armhf.deb ... Unpacking librtmp1:armhf (2.4+20151223.gitfa8646d.1-2+b4) ... Selecting previously unselected package libssh2-1t64:armhf. Preparing to unpack .../29-libssh2-1t64_1.11.0-5_armhf.deb ... Unpacking libssh2-1t64:armhf (1.11.0-5) ... Selecting previously unselected package libcurl4t64:armhf. Preparing to unpack .../30-libcurl4t64_8.8.0-1_armhf.deb ... Unpacking libcurl4t64:armhf (8.8.0-1) ... Selecting previously unselected package libhttp-parser2.9:armhf. Preparing to unpack .../31-libhttp-parser2.9_2.9.4-6+b1_armhf.deb ... Unpacking libhttp-parser2.9:armhf (2.9.4-6+b1) ... Selecting previously unselected package libmbedcrypto7t64:armhf. Preparing to unpack .../32-libmbedcrypto7t64_2.28.8-1_armhf.deb ... Unpacking libmbedcrypto7t64:armhf (2.28.8-1) ... Selecting previously unselected package libmbedx509-1t64:armhf. Preparing to unpack .../33-libmbedx509-1t64_2.28.8-1_armhf.deb ... Unpacking libmbedx509-1t64:armhf (2.28.8-1) ... Selecting previously unselected package libmbedtls14t64:armhf. Preparing to unpack .../34-libmbedtls14t64_2.28.8-1_armhf.deb ... Unpacking libmbedtls14t64:armhf (2.28.8-1) ... Selecting previously unselected package libgit2-1.7:armhf. Preparing to unpack .../35-libgit2-1.7_1.7.2+ds-1+b2_armhf.deb ... Unpacking libgit2-1.7:armhf (1.7.2+ds-1+b2) ... Selecting previously unselected package libbsd0:armhf. Preparing to unpack .../36-libbsd0_0.12.2-1_armhf.deb ... Unpacking libbsd0:armhf (0.12.2-1) ... Selecting previously unselected package libedit2:armhf. Preparing to unpack .../37-libedit2_3.1-20240517-1_armhf.deb ... Unpacking libedit2:armhf (3.1-20240517-1) ... Selecting previously unselected package libicu72:armhf. Preparing to unpack .../38-libicu72_72.1-4+b1_armhf.deb ... Unpacking libicu72:armhf (72.1-4+b1) ... Selecting previously unselected package libxml2:armhf. Preparing to unpack .../39-libxml2_2.9.14+dfsg-1.3+b3_armhf.deb ... Unpacking libxml2:armhf (2.9.14+dfsg-1.3+b3) ... Selecting previously unselected package libz3-4:armhf. Preparing to unpack .../40-libz3-4_4.8.12-3.1+b2_armhf.deb ... Unpacking libz3-4:armhf (4.8.12-3.1+b2) ... Selecting previously unselected package libllvm16t64:armhf. Preparing to unpack .../41-libllvm16t64_1%3a16.0.6-27_armhf.deb ... Unpacking libllvm16t64:armhf (1:16.0.6-27) ... Selecting previously unselected package libstd-rust-1.71:armhf. Preparing to unpack .../42-libstd-rust-1.71_1.71.1+dfsg1-2_armhf.deb ... Unpacking libstd-rust-1.71:armhf (1.71.1+dfsg1-2) ... Selecting previously unselected package libstd-rust-dev:armhf. Preparing to unpack .../43-libstd-rust-dev_1.71.1+dfsg1-2_armhf.deb ... Unpacking libstd-rust-dev:armhf (1.71.1+dfsg1-2) ... Selecting previously unselected package rustc. Preparing to unpack .../44-rustc_1.71.1+dfsg1-2_armhf.deb ... Unpacking rustc (1.71.1+dfsg1-2) ... Selecting previously unselected package cargo. Preparing to unpack .../45-cargo_1.71.1+dfsg1-2_armhf.deb ... Unpacking cargo (1.71.1+dfsg1-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../46-libdebhelper-perl_13.15.3_all.deb ... Unpacking libdebhelper-perl (13.15.3) ... Selecting previously unselected package libtool. Preparing to unpack .../47-libtool_2.4.7-7_all.deb ... Unpacking libtool (2.4.7-7) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../48-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../49-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../50-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../51-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:armhf. Preparing to unpack .../52-libelf1t64_0.191-1+b1_armhf.deb ... Unpacking libelf1t64:armhf (0.191-1+b1) ... Selecting previously unselected package dwz. Preparing to unpack .../53-dwz_0.15-1+b2_armhf.deb ... Unpacking dwz (0.15-1+b2) ... Selecting previously unselected package gettext. Preparing to unpack .../54-gettext_0.21-14+b1_armhf.deb ... Unpacking gettext (0.21-14+b1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../55-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../56-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../57-debhelper_13.15.3_all.deb ... Unpacking debhelper (13.15.3) ... Selecting previously unselected package dh-cargo. Preparing to unpack .../58-dh-cargo_31_all.deb ... Unpacking dh-cargo (31) ... Setting up media-types (10.1.0) ... Setting up libpipeline1:armhf (1.5.7-2) ... Setting up libkeyutils1:armhf (1.6.3-3) ... Setting up libicu72:armhf (72.1-4+b1) ... Setting up bsdextrautils (2.40.1-2) ... Setting up libmbedcrypto7t64:armhf (2.28.8-1) ... Setting up libmagic-mgc (1:5.45-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.15.3) ... Setting up libbrotli1:armhf (1.1.0-2+b3) ... Setting up libmagic1t64:armhf (1:5.45-3) ... Setting up libpsl5t64:armhf (0.21.2-1.1) ... Setting up libnghttp2-14:armhf (1.61.0-1+b1) ... Setting up gettext-base (0.21-14+b1) ... Setting up m4 (1.4.19-4) ... Setting up libcom-err2:armhf (1.47.1-1) ... Setting up file (1:5.45-3) ... Setting up libelf1t64:armhf (0.191-1+b1) ... Setting up libkrb5support0:armhf (1.20.1-6+b1) ... Setting up libsasl2-modules-db:armhf (2.1.28+dfsg1-6) ... Setting up tzdata (2024a-4) ... Current default time zone: 'Etc/UTC' Local time is now: Thu May 30 17:27:19 UTC 2024. Universal Time is now: Thu May 30 17:27:19 UTC 2024. Run 'dpkg-reconfigure tzdata' if you wish to change it. Setting up autotools-dev (20220109.1) ... Setting up libz3-4:armhf (4.8.12-3.1+b2) ... Setting up librtmp1:armhf (2.4+20151223.gitfa8646d.1-2+b4) ... Setting up autopoint (0.21-14) ... Setting up libk5crypto3:armhf (1.20.1-6+b1) ... Setting up libsasl2-2:armhf (2.1.28+dfsg1-6) ... Setting up autoconf (2.71-3) ... Setting up dwz (0.15-1+b2) ... Setting up sensible-utils (0.0.22) ... Setting up libuchardet0:armhf (0.0.8-1+b1) ... Setting up netbase (6.4) ... Setting up libkrb5-3:armhf (1.20.1-6+b1) ... Setting up libssh2-1t64:armhf (1.11.0-5) ... Setting up libbsd0:armhf (0.12.2-1) ... Setting up readline-common (8.2-4) ... Setting up libxml2:armhf (2.9.14+dfsg-1.3+b3) ... Setting up libhttp-parser2.9:armhf (2.9.4-6+b1) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up gettext (0.21-14+b1) ... Setting up libmbedx509-1t64:armhf (2.28.8-1) ... Setting up libtool (2.4.7-7) ... Setting up libedit2:armhf (3.1-20240517-1) ... Setting up libldap-2.5-0:armhf (2.5.17+dfsg-1) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up libllvm16t64:armhf (1:16.0.6-27) ... Setting up dh-autoreconf (20) ... Setting up libstd-rust-1.71:armhf (1.71.1+dfsg1-2) ... Setting up libgssapi-krb5-2:armhf (1.20.1-6+b1) ... Setting up libreadline8t64:armhf (8.2-4) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up libmbedtls14t64:armhf (2.28.8-1) ... Setting up groff-base (1.23.0-4) ... Setting up libgit2-1.7:armhf (1.7.2+ds-1+b2) ... Setting up libcurl4t64:armhf (8.8.0-1) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up libpython3.11-stdlib:armhf (3.11.9-1) ... Setting up man-db (2.12.1-1) ... Not building database; man-db/auto-update is not 'true'. Setting up libstd-rust-dev:armhf (1.71.1+dfsg1-2) ... Setting up rustc (1.71.1+dfsg1-2) ... Setting up libpython3-stdlib:armhf (3.11.8-1) ... Setting up python3.11 (3.11.9-1) ... Setting up debhelper (13.15.3) ... Setting up python3 (3.11.8-1) ... Setting up cargo (1.71.1+dfsg1-2) ... Setting up dh-cargo (31) ... Processing triggers for libc-bin (2.38-11) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.33-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/reproducible-path/rust-podio-0.1.6/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../rust-podio_0.1.6-1_source.changes dpkg-buildpackage: info: source package rust-podio dpkg-buildpackage: info: source version 0.1.6-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Sylvestre Ledru dpkg-source --before-build . dpkg-buildpackage: info: host architecture armhf fakeroot debian/rules clean dh clean --buildsystem cargo dh_auto_clean -O--buildsystem=cargo debian cargo wrapper: options, profiles, parallel, lto: ['buildinfo=+all', 'reproducible=+all', 'parallel=3'] [] ['-j3'] 0 debian cargo wrapper: rust_type, gnu_type: armv7-unknown-linux-gnueabihf, arm-linux-gnueabihf debian cargo wrapper: running subprocess (['env', 'RUST_BACKTRACE=1', '/usr/bin/cargo', 'clean', '--verbose', '--verbose'],) {'check': True} dh_autoreconf_clean -O--buildsystem=cargo dh_clean -O--buildsystem=cargo debian/rules build dh build --buildsystem cargo dh_update_autotools_config -O--buildsystem=cargo dh_autoreconf -O--buildsystem=cargo dh_auto_configure -O--buildsystem=cargo debian cargo wrapper: options, profiles, parallel, lto: ['buildinfo=+all', 'reproducible=+all', 'parallel=3'] [] ['-j3'] 0 debian cargo wrapper: rust_type, gnu_type: armv7-unknown-linux-gnueabihf, arm-linux-gnueabihf debian cargo wrapper: linking /usr/share/cargo/registry/* into /build/reproducible-path/rust-podio-0.1.6/debian/cargo_registry/ dh_auto_build -O--buildsystem=cargo dh_auto_test -O--buildsystem=cargo debian cargo wrapper: options, profiles, parallel, lto: ['buildinfo=+all', 'reproducible=+all', 'parallel=3'] [] ['-j3'] 0 debian cargo wrapper: rust_type, gnu_type: armv7-unknown-linux-gnueabihf, arm-linux-gnueabihf debian cargo wrapper: running subprocess (['env', 'RUST_BACKTRACE=1', '/usr/bin/cargo', '-Zavoid-dev-deps', 'build', '--verbose', '--verbose', '-j3', '--target', 'armv7-unknown-linux-gnueabihf'],) {} Compiling podio v0.1.6 (/build/reproducible-path/rust-podio-0.1.6) Running `CARGO=/usr/bin/cargo CARGO_CRATE_NAME=podio CARGO_MANIFEST_DIR=/build/reproducible-path/rust-podio-0.1.6 CARGO_PKG_AUTHORS='Mathijs van de Nes ' CARGO_PKG_DESCRIPTION='Additional trait for Read and Write to read and write Plain Old Data ' CARGO_PKG_HOMEPAGE='' CARGO_PKG_LICENSE='MIT OR Apache-2.0' CARGO_PKG_LICENSE_FILE='' CARGO_PKG_NAME=podio CARGO_PKG_README=README.md CARGO_PKG_REPOSITORY='https://github.com/mvdnes/podio.git' CARGO_PKG_RUST_VERSION='' CARGO_PKG_VERSION=0.1.6 CARGO_PKG_VERSION_MAJOR=0 CARGO_PKG_VERSION_MINOR=1 CARGO_PKG_VERSION_PATCH=6 CARGO_PKG_VERSION_PRE='' CARGO_PRIMARY_PACKAGE=1 LD_LIBRARY_PATH='/build/reproducible-path/rust-podio-0.1.6/target/debug/deps:/usr/lib' rustc --crate-name podio src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C embed-bitcode=no -C debuginfo=2 -C metadata=c7f4ca16fd86ca83 -C extra-filename=-c7f4ca16fd86ca83 --out-dir /build/reproducible-path/rust-podio-0.1.6/target/armv7-unknown-linux-gnueabihf/debug/deps --target armv7-unknown-linux-gnueabihf -C incremental=/build/reproducible-path/rust-podio-0.1.6/target/armv7-unknown-linux-gnueabihf/debug/incremental -L dependency=/build/reproducible-path/rust-podio-0.1.6/target/armv7-unknown-linux-gnueabihf/debug/deps -L dependency=/build/reproducible-path/rust-podio-0.1.6/target/debug/deps -C debuginfo=2 --cap-lints warn -C linker=arm-linux-gnueabihf-gcc -C link-arg=-Wl,-z,relro --remap-path-prefix /build/reproducible-path/rust-podio-0.1.6=/usr/share/cargo/registry/podio-0.1.6 --remap-path-prefix /build/reproducible-path/rust-podio-0.1.6/debian/cargo_registry=/usr/share/cargo/registry` warning: anonymous parameters are deprecated and will be removed in the next edition --> src/lib.rs:91:44 | 91 | fn write_u64(&mut self, u64) -> io::Result<()>; | ^^^ help: try naming the parameter or explicitly ignoring it: `_: u64` | = warning: this is accepted in the current edition (Rust 2015) but is a hard error in Rust 2018! = note: for more information, see issue #41686 = note: `#[warn(anonymous_parameters)]` on by default warning: anonymous parameters are deprecated and will be removed in the next edition --> src/lib.rs:93:44 | 93 | fn write_u32(&mut self, u32) -> io::Result<()>; | ^^^ help: try naming the parameter or explicitly ignoring it: `_: u32` | = warning: this is accepted in the current edition (Rust 2015) but is a hard error in Rust 2018! = note: for more information, see issue #41686 warning: anonymous parameters are deprecated and will be removed in the next edition --> src/lib.rs:95:44 | 95 | fn write_u16(&mut self, u16) -> io::Result<()>; | ^^^ help: try naming the parameter or explicitly ignoring it: `_: u16` | = warning: this is accepted in the current edition (Rust 2015) but is a hard error in Rust 2018! = note: for more information, see issue #41686 warning: anonymous parameters are deprecated and will be removed in the next edition --> src/lib.rs:97:28 | 97 | fn write_u8(&mut self, u8) -> io::Result<()>; | ^^ help: try naming the parameter or explicitly ignoring it: `_: u8` | = warning: this is accepted in the current edition (Rust 2015) but is a hard error in Rust 2018! = note: for more information, see issue #41686 warning: anonymous parameters are deprecated and will be removed in the next edition --> src/lib.rs:99:44 | 99 | fn write_i64(&mut self, i64) -> io::Result<()>; | ^^^ help: try naming the parameter or explicitly ignoring it: `_: i64` | = warning: this is accepted in the current edition (Rust 2015) but is a hard error in Rust 2018! = note: for more information, see issue #41686 warning: anonymous parameters are deprecated and will be removed in the next edition --> src/lib.rs:101:44 | 101 | fn write_i32(&mut self, i32) -> io::Result<()>; | ^^^ help: try naming the parameter or explicitly ignoring it: `_: i32` | = warning: this is accepted in the current edition (Rust 2015) but is a hard error in Rust 2018! = note: for more information, see issue #41686 warning: anonymous parameters are deprecated and will be removed in the next edition --> src/lib.rs:103:44 | 103 | fn write_i16(&mut self, i16) -> io::Result<()>; | ^^^ help: try naming the parameter or explicitly ignoring it: `_: i16` | = warning: this is accepted in the current edition (Rust 2015) but is a hard error in Rust 2018! = note: for more information, see issue #41686 warning: anonymous parameters are deprecated and will be removed in the next edition --> src/lib.rs:105:28 | 105 | fn write_i8(&mut self, i8) -> io::Result<()>; | ^^ help: try naming the parameter or explicitly ignoring it: `_: i8` | = warning: this is accepted in the current edition (Rust 2015) but is a hard error in Rust 2018! = note: for more information, see issue #41686 warning: anonymous parameters are deprecated and will be removed in the next edition --> src/lib.rs:107:44 | 107 | fn write_f32(&mut self, f32) -> io::Result<()>; | ^^^ help: try naming the parameter or explicitly ignoring it: `_: f32` | = warning: this is accepted in the current edition (Rust 2015) but is a hard error in Rust 2018! = note: for more information, see issue #41686 warning: anonymous parameters are deprecated and will be removed in the next edition --> src/lib.rs:109:44 | 109 | fn write_f64(&mut self, f64) -> io::Result<()>; | ^^^ help: try naming the parameter or explicitly ignoring it: `_: f64` | = warning: this is accepted in the current edition (Rust 2015) but is a hard error in Rust 2018! = note: for more information, see issue #41686 warning: anonymous parameters are deprecated and will be removed in the next edition --> src/lib.rs:135:30 | 135 | fn read_exact(&mut self, usize) -> io::Result>; | ^^^^^ help: try naming the parameter or explicitly ignoring it: `_: usize` | = warning: this is accepted in the current edition (Rust 2015) but is a hard error in Rust 2018! = note: for more information, see issue #41686 warning: use of deprecated macro `try`: use the `?` operator instead --> src/lib.rs:282:9 | 282 | try!(fill_buf(self, buf)); | ^^^ | = note: `#[warn(deprecated)]` on by default warning: use of deprecated macro `try`: use the `?` operator instead --> src/lib.rs:289:9 | 289 | try!(fill_buf(self, buf)); | ^^^ warning: use of deprecated macro `try`: use the `?` operator instead --> src/lib.rs:296:9 | 296 | try!(fill_buf(self, buf)); | ^^^ warning: use of deprecated macro `try`: use the `?` operator instead --> src/lib.rs:303:9 | 303 | try!(fill_buf(self, buf)); | ^^^ warning: use of deprecated macro `try`: use the `?` operator instead --> src/lib.rs:333:9 | 333 | try!(fill_buf(self, &mut res)); | ^^^ warning: `podio` (lib) generated 16 warnings (run `cargo fix --lib -p podio` to apply 11 suggestions) Finished dev [unoptimized + debuginfo] target(s) in 2.39s rustc 1.71.1+dfsg1-2 1 create-stamp debian/debhelper-build-stamp fakeroot debian/rules binary dh binary --buildsystem cargo dh_testroot -O--buildsystem=cargo dh_prep -O--buildsystem=cargo dh_auto_install --destdir=debian/librust-podio-dev/ -O--buildsystem=cargo dh_installdocs -O--buildsystem=cargo dh_installchangelogs -O--buildsystem=cargo dh_installinit -O--buildsystem=cargo dh_perl -O--buildsystem=cargo dh_link -O--buildsystem=cargo dh_strip_nondeterminism -O--buildsystem=cargo dh_compress -O--buildsystem=cargo dh_fixperms -O--buildsystem=cargo dh_missing -O--buildsystem=cargo dh_strip -O--buildsystem=cargo dh_makeshlibs -O--buildsystem=cargo dh_shlibdeps -O--buildsystem=cargo dh_installdeb -O--buildsystem=cargo dh_gencontrol -O--buildsystem=cargo dh_md5sums -O--buildsystem=cargo dh_builddeb -O--buildsystem=cargo dpkg-deb: building package 'librust-podio-dev' in '../librust-podio-dev_0.1.6-1_armhf.deb'. dpkg-genbuildinfo --build=binary -O../rust-podio_0.1.6-1_armhf.buildinfo dpkg-genchanges --build=binary -O../rust-podio_0.1.6-1_armhf.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: including full source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/19989 and its subdirectories I: Current time: Thu May 30 05:28:25 -12 2024 I: pbuilder-time-stamp: 1717090105 Thu May 30 17:28:32 UTC 2024 I: 1st build successful. Starting 2nd build on remote node virt64c-armhf-rb.debian.net. Thu May 30 17:28:32 UTC 2024 I: Preparing to do remote build '2' on virt64c-armhf-rb.debian.net. Thu May 30 17:30:41 UTC 2024 I: Deleting $TMPDIR on virt64c-armhf-rb.debian.net. Thu May 30 17:30:43 UTC 2024 I: rust-podio_0.1.6-1_armhf.changes: Format: 1.8 Date: Sun, 14 Oct 2018 12:03:02 +0200 Source: rust-podio Binary: librust-podio-dev Architecture: armhf Version: 0.1.6-1 Distribution: unstable Urgency: medium Maintainer: Debian Rust Maintainers Changed-By: Sylvestre Ledru Description: librust-podio-dev - Additional trait for Read and Write to read and write Plain Old D Changes: rust-podio (0.1.6-1) unstable; urgency=medium . * Package podio 0.1.6 from crates.io using debcargo 2.2.7 Checksums-Sha1: df9fcfbd2df85941450c8ce3e4865cad2bd45587 11524 librust-podio-dev_0.1.6-1_armhf.deb 3baf39e7f9ca8cf8f1cad6ddff03a5046ad19afb 6109 rust-podio_0.1.6-1_armhf.buildinfo Checksums-Sha256: 56acaecba4ada3f2375266841c6284a1f5ab4305826a978bfd9090718bc0f686 11524 librust-podio-dev_0.1.6-1_armhf.deb d6fdd3aeef9af959ea872fb4ec06ace11d7c44b8d8ab583de282574a70d41ed4 6109 rust-podio_0.1.6-1_armhf.buildinfo Files: 33f8381969fec1d8ad6d3b3f73f2cf23 11524 rust optional librust-podio-dev_0.1.6-1_armhf.deb 8e976bebff59bea818136a87c2492544 6109 rust optional rust-podio_0.1.6-1_armhf.buildinfo Thu May 30 17:30:44 UTC 2024 I: diffoscope 268 will be used to compare the two builds: Running as unit: rb-diffoscope-armhf_22-4096.service # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.aMGPjKJc/rust-podio_0.1.6-1.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.aMGPjKJc/rust-podio_0.1.6-1.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.aMGPjKJc/rust-podio_0.1.6-1.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.aMGPjKJc/b1/rust-podio_0.1.6-1_armhf.changes /srv/reproducible-results/rbuild-debian/r-b-build.aMGPjKJc/b2/rust-podio_0.1.6-1_armhf.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.374s) 0.374s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.016s) 0.016s 12 calls diffoscope.comparators.binary.FilesystemFile ## specialize (total time: 0.000s) 0.000s 1 call specialize Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 725ms CPU time consumed: 725ms Thu May 30 17:30:46 UTC 2024 I: diffoscope 268 found no differences in the changes files, and a .buildinfo file also exists. Thu May 30 17:30:46 UTC 2024 I: rust-podio from trixie built successfully and reproducibly on armhf. Thu May 30 17:30:47 UTC 2024 I: Submitting .buildinfo files to external archives: Thu May 30 17:30:47 UTC 2024 I: Submitting 8.0K b1/rust-podio_0.1.6-1_armhf.buildinfo.asc Thu May 30 17:30:48 UTC 2024 I: Submitting 8.0K b2/rust-podio_0.1.6-1_armhf.buildinfo.asc Thu May 30 17:30:51 UTC 2024 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Thu May 30 17:30:51 UTC 2024 I: Done submitting .buildinfo files. Thu May 30 17:30:51 UTC 2024 I: Removing signed rust-podio_0.1.6-1_armhf.buildinfo.asc files: removed './b1/rust-podio_0.1.6-1_armhf.buildinfo.asc' removed './b2/rust-podio_0.1.6-1_armhf.buildinfo.asc'