Tue Jun 18 13:04:07 UTC 2024 I: starting to build qprint/trixie/armhf on jenkins on '2024-06-18 13:03' Tue Jun 18 13:04:07 UTC 2024 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/armhf_23/3710/console.log Tue Jun 18 13:04:07 UTC 2024 I: Downloading source for trixie/qprint=1.1.dfsg.2-2.2 --2024-06-18 13:04:08-- http://deb.debian.org/debian/pool/main/q/qprint/qprint_1.1.dfsg.2-2.2.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 1648 (1.6K) [text/prs.lines.tag] Saving to: ‘qprint_1.1.dfsg.2-2.2.dsc’ 0K . 100% 127M=0s 2024-06-18 13:04:08 (127 MB/s) - ‘qprint_1.1.dfsg.2-2.2.dsc’ saved [1648/1648] Tue Jun 18 13:04:08 UTC 2024 I: qprint_1.1.dfsg.2-2.2.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: qprint Binary: qprint, qprint-doc Architecture: any all Version: 1.1.dfsg.2-2.2 Maintainer: Eugene V. Lyubimkin Homepage: http://www.fourmilab.ch/webtools/qprint/ Standards-Version: 3.9.5 Build-Depends: debhelper (>= 9) Package-List: qprint deb utils optional arch=any qprint-doc deb doc optional arch=all Checksums-Sha1: 65e2a4e6b2cf7475b9f0449fef0848d2f6452b89 327995 qprint_1.1.dfsg.2.orig.tar.gz 1f524046f2516da3bf853a4c7820068df15b76b8 2228 qprint_1.1.dfsg.2-2.2.debian.tar.xz Checksums-Sha256: 5bfb038c05453db8f356dd01e06e2dd5629519faa26c9ab190d67a3e71de6f02 327995 qprint_1.1.dfsg.2.orig.tar.gz e226dd97fd1c6cee58e6d61d57372be6e3151e8ac402a9c1b1710da50828f12d 2228 qprint_1.1.dfsg.2-2.2.debian.tar.xz Files: 8d4a918bf70d78ca44316569ccbaa8a2 327995 qprint_1.1.dfsg.2.orig.tar.gz 41bad76bde25a660762a7dd0a1ca513b 2228 qprint_1.1.dfsg.2-2.2.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQHEBAEBCgAuFiEEQGIgyLhVKAI3jM5BH1x6i0VWQxQFAmZbLW8QHGJhZ2VAZGVi aWFuLm9yZwAKCRAfXHqLRVZDFBlADACXIoRa4WhUkAsn6tZbXnYk5E7kiTdUdsha +0F5zoMVd+3vySIbAdMoznpPNONU+aXtpBMJ2OCM7UbWwB1De9UFlZ6BaUO2Pjid q2j6kF2g28rhgyJx7Q/chkeih0V/KZLSZLPmrft+0Rob467Dc1w/pDQgkwdzFxR2 QmG7r+Qt0xHO3ejEN+ZqGHu2/amgS0DZaExO66/bULat8BdwybjBFPABye2J0eif 7UFiYKx6KXpqp7y4MV8p7kU2exXoINs+6/94tUSDAH4A2drbwQ57UnVGbljUwJ9h lSO/yuI69ue890XpRkAW9yUjAB2VKBTB5MWRkhLaGwG37KooJxPuKGfbjZJLaTit vnc3Wr4sDiFKtjTmLJueAlgvG6kKBudX//Xr2cb7qJQ7Cpol8iNpaHrP/KcvuYIZ y31iUuTyDnM6KCjkszwEMrH8xAWAZSw2UhLj58ORTG+qySrrXQM0URwPniz0V4LQ hDOfhGRHcdDDJ7+MC0le4LUiXDNdCY8= =f+aT -----END PGP SIGNATURE----- Tue Jun 18 13:04:08 UTC 2024 I: Checking whether the package is not for us Tue Jun 18 13:04:08 UTC 2024 I: Starting 1st build on remote node cbxi4b-armhf-rb.debian.net. Tue Jun 18 13:04:08 UTC 2024 I: Preparing to do remote build '1' on cbxi4b-armhf-rb.debian.net. Tue Jun 18 13:06:46 UTC 2024 I: Deleting $TMPDIR on cbxi4b-armhf-rb.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Tue Jun 18 01:04:17 -12 2024 I: pbuilder-time-stamp: 1718715857 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [qprint_1.1.dfsg.2-2.2.dsc] I: copying [./qprint_1.1.dfsg.2.orig.tar.gz] I: copying [./qprint_1.1.dfsg.2-2.2.debian.tar.xz] I: Extracting source gpgv: Signature made Sat Jun 1 14:17:19 2024 gpgv: using RSA key 406220C8B8552802378CCE411F5C7A8B45564314 gpgv: issuer "bage@debian.org" gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./qprint_1.1.dfsg.2-2.2.dsc: no acceptable signature found dpkg-source: info: extracting qprint in qprint-1.1.dfsg.2 dpkg-source: info: unpacking qprint_1.1.dfsg.2.orig.tar.gz dpkg-source: info: unpacking qprint_1.1.dfsg.2-2.2.debian.tar.xz I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/18947/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='armhf' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=3 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='armhf' IFS=' ' INVOCATION_ID='205b39dafc0b409599c62797019bf6c8' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='18947' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.VMnDF0RK/pbuilderrc_6Ztg --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.VMnDF0RK/b1 --logfile b1/build.log qprint_1.1.dfsg.2-2.2.dsc' SUDO_GID='116' SUDO_UID='112' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://10.0.0.15:3142/' I: uname -a Linux cbxi4b 6.1.0-21-armmp #1 SMP Debian 6.1.90-1 (2024-05-03) armv7l GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Jun 5 22:35 /bin -> usr/bin I: user script /srv/workspace/pbuilder/18947/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: armhf Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper (>= 9) dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19443 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper (>= 9); however: Package debhelper is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libicu72{a} libmagic-mgc{a} libmagic1t64{a} libpipeline1{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 29 newly installed, 0 to remove and 0 not upgraded. Need to get 18.4 MB of archives. After unpacking 68.8 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main armhf sensible-utils all 0.0.22 [22.4 kB] Get: 2 http://deb.debian.org/debian trixie/main armhf libmagic-mgc armhf 1:5.45-3 [314 kB] Get: 3 http://deb.debian.org/debian trixie/main armhf libmagic1t64 armhf 1:5.45-3 [98.1 kB] Get: 4 http://deb.debian.org/debian trixie/main armhf file armhf 1:5.45-3 [42.0 kB] Get: 5 http://deb.debian.org/debian trixie/main armhf gettext-base armhf 0.21-14+b1 [157 kB] Get: 6 http://deb.debian.org/debian trixie/main armhf libuchardet0 armhf 0.0.8-1+b1 [65.7 kB] Get: 7 http://deb.debian.org/debian trixie/main armhf groff-base armhf 1.23.0-4 [1090 kB] Get: 8 http://deb.debian.org/debian trixie/main armhf bsdextrautils armhf 2.40.1-8.1 [87.7 kB] Get: 9 http://deb.debian.org/debian trixie/main armhf libpipeline1 armhf 1.5.7-2 [33.3 kB] Get: 10 http://deb.debian.org/debian trixie/main armhf man-db armhf 2.12.1-2 [1376 kB] Get: 11 http://deb.debian.org/debian trixie/main armhf m4 armhf 1.4.19-4 [264 kB] Get: 12 http://deb.debian.org/debian trixie/main armhf autoconf all 2.71-3 [332 kB] Get: 13 http://deb.debian.org/debian trixie/main armhf autotools-dev all 20220109.1 [51.6 kB] Get: 14 http://deb.debian.org/debian trixie/main armhf automake all 1:1.16.5-1.3 [823 kB] Get: 15 http://deb.debian.org/debian trixie/main armhf autopoint all 0.21-14 [496 kB] Get: 16 http://deb.debian.org/debian trixie/main armhf libdebhelper-perl all 13.15.3 [88.0 kB] Get: 17 http://deb.debian.org/debian trixie/main armhf libtool all 2.4.7-7 [517 kB] Get: 18 http://deb.debian.org/debian trixie/main armhf dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian trixie/main armhf libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian trixie/main armhf libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get: 21 http://deb.debian.org/debian trixie/main armhf dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get: 22 http://deb.debian.org/debian trixie/main armhf libelf1t64 armhf 0.191-1+b1 [183 kB] Get: 23 http://deb.debian.org/debian trixie/main armhf dwz armhf 0.15-1+b2 [106 kB] Get: 24 http://deb.debian.org/debian trixie/main armhf libicu72 armhf 72.1-4+b1 [9070 kB] Get: 25 http://deb.debian.org/debian trixie/main armhf libxml2 armhf 2.9.14+dfsg-1.3+b3 [598 kB] Get: 26 http://deb.debian.org/debian trixie/main armhf gettext armhf 0.21-14+b1 [1230 kB] Get: 27 http://deb.debian.org/debian trixie/main armhf intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian trixie/main armhf po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian trixie/main armhf debhelper all 13.15.3 [901 kB] Fetched 18.4 MB in 2s (11.5 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19443 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.22_all.deb ... Unpacking sensible-utils (0.0.22) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3_armhf.deb ... Unpacking libmagic-mgc (1:5.45-3) ... Selecting previously unselected package libmagic1t64:armhf. Preparing to unpack .../02-libmagic1t64_1%3a5.45-3_armhf.deb ... Unpacking libmagic1t64:armhf (1:5.45-3) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-3_armhf.deb ... Unpacking file (1:5.45-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.21-14+b1_armhf.deb ... Unpacking gettext-base (0.21-14+b1) ... Selecting previously unselected package libuchardet0:armhf. Preparing to unpack .../05-libuchardet0_0.0.8-1+b1_armhf.deb ... Unpacking libuchardet0:armhf (0.0.8-1+b1) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-4_armhf.deb ... Unpacking groff-base (1.23.0-4) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.40.1-8.1_armhf.deb ... Unpacking bsdextrautils (2.40.1-8.1) ... Selecting previously unselected package libpipeline1:armhf. Preparing to unpack .../08-libpipeline1_1.5.7-2_armhf.deb ... Unpacking libpipeline1:armhf (1.5.7-2) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.12.1-2_armhf.deb ... Unpacking man-db (2.12.1-2) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-4_armhf.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.71-3_all.deb ... Unpacking autoconf (2.71-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.21-14_all.deb ... Unpacking autopoint (0.21-14) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.15.3_all.deb ... Unpacking libdebhelper-perl (13.15.3) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.4.7-7_all.deb ... Unpacking libtool (2.4.7-7) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:armhf. Preparing to unpack .../21-libelf1t64_0.191-1+b1_armhf.deb ... Unpacking libelf1t64:armhf (0.191-1+b1) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b2_armhf.deb ... Unpacking dwz (0.15-1+b2) ... Selecting previously unselected package libicu72:armhf. Preparing to unpack .../23-libicu72_72.1-4+b1_armhf.deb ... Unpacking libicu72:armhf (72.1-4+b1) ... Selecting previously unselected package libxml2:armhf. Preparing to unpack .../24-libxml2_2.9.14+dfsg-1.3+b3_armhf.deb ... Unpacking libxml2:armhf (2.9.14+dfsg-1.3+b3) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.21-14+b1_armhf.deb ... Unpacking gettext (0.21-14+b1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.15.3_all.deb ... Unpacking debhelper (13.15.3) ... Setting up libpipeline1:armhf (1.5.7-2) ... Setting up libicu72:armhf (72.1-4+b1) ... Setting up bsdextrautils (2.40.1-8.1) ... Setting up libmagic-mgc (1:5.45-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.15.3) ... Setting up libmagic1t64:armhf (1:5.45-3) ... Setting up gettext-base (0.21-14+b1) ... Setting up m4 (1.4.19-4) ... Setting up file (1:5.45-3) ... Setting up libelf1t64:armhf (0.191-1+b1) ... Setting up autotools-dev (20220109.1) ... Setting up autopoint (0.21-14) ... Setting up autoconf (2.71-3) ... Setting up dwz (0.15-1+b2) ... Setting up sensible-utils (0.0.22) ... Setting up libuchardet0:armhf (0.0.8-1+b1) ... Setting up libxml2:armhf (2.9.14+dfsg-1.3+b3) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up gettext (0.21-14+b1) ... Setting up libtool (2.4.7-7) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up groff-base (1.23.0-4) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.12.1-2) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.15.3) ... Processing triggers for libc-bin (2.38-13) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.33-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/reproducible-path/qprint-1.1.dfsg.2/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../qprint_1.1.dfsg.2-2.2_source.changes dpkg-buildpackage: info: source package qprint dpkg-buildpackage: info: source version 1.1.dfsg.2-2.2 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Bastian Germann dpkg-source --before-build . dpkg-buildpackage: info: host architecture armhf fakeroot debian/rules clean dh clean dh: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_clean dh_clean: warning: Compatibility levels before 10 are deprecated (level 9 in use) debian/rules build dh build dh: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_update_autotools_config dh_auto_configure dh_auto_configure: warning: Compatibility levels before 10 are deprecated (level 9 in use) ./configure --build=arm-linux-gnueabihf --prefix=/usr --includedir=\${prefix}/include --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info --sysconfdir=/etc --localstatedir=/var --disable-option-checking --disable-silent-rules --libdir=\${prefix}/lib/arm-linux-gnueabihf --libexecdir=\${prefix}/lib/arm-linux-gnueabihf --disable-maintainer-mode --disable-dependency-tracking checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking for a BSD-compatible install... /usr/bin/install -c checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for unistd.h... (cached) yes checking for string.h... (cached) yes checking for strings.h... (cached) yes checking size of unsigned long long... 8 checking size of unsigned long... 4 checking for getopt... yes configure: creating ./config.status config.status: creating Makefile config.status: WARNING: 'Makefile.in' seems to ignore the --datarootdir setting config.status: creating config.h dh_auto_build dh_auto_build: warning: Compatibility levels before 10 are deprecated (level 9 in use) make -j1 make[1]: Entering directory '/build/reproducible-path/qprint-1.1.dfsg.2' gcc -c qprint.c -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/qprint-1.1.dfsg.2=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security gcc -c getopt.c -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/qprint-1.1.dfsg.2=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security gcc qprint.o getopt.o -o qprint -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/qprint-1.1.dfsg.2=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -Wl,-z,relro make[1]: Leaving directory '/build/reproducible-path/qprint-1.1.dfsg.2' debian/rules override_dh_auto_test make[1]: Entering directory '/build/reproducible-path/qprint-1.1.dfsg.2' # do nothing make[1]: Leaving directory '/build/reproducible-path/qprint-1.1.dfsg.2' fakeroot debian/rules binary dh binary dh: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_testroot dh_prep dh_installdirs dh_installdirs: warning: Compatibility levels before 10 are deprecated (level 9 in use) debian/rules override_dh_auto_install make[1]: Entering directory '/build/reproducible-path/qprint-1.1.dfsg.2' # do nothing make[1]: Leaving directory '/build/reproducible-path/qprint-1.1.dfsg.2' dh_install dh_install: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_installdocs dh_installdocs: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_installchangelogs dh_installchangelogs: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_installman dh_installman: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_perl dh_link dh_link: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_strip_nondeterminism dh_compress dh_compress: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_compress: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_fixperms dh_missing dh_missing: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_strip dh_strip: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_strip: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_makeshlibs dh_makeshlibs: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_shlibdeps dh_shlibdeps: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_shlibdeps: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_installdeb dh_installdeb: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_gencontrol dh_gencontrol: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_md5sums dh_builddeb dpkg-deb: building package 'qprint' in '../qprint_1.1.dfsg.2-2.2_armhf.deb'. dpkg-deb: building package 'qprint-dbgsym' in '../qprint-dbgsym_1.1.dfsg.2-2.2_armhf.deb'. dpkg-deb: building package 'qprint-doc' in '../qprint-doc_1.1.dfsg.2-2.2_all.deb'. dpkg-genbuildinfo --build=binary -O../qprint_1.1.dfsg.2-2.2_armhf.buildinfo dpkg-genchanges --build=binary -O../qprint_1.1.dfsg.2-2.2_armhf.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/18947 and its subdirectories I: Current time: Tue Jun 18 01:06:41 -12 2024 I: pbuilder-time-stamp: 1718716001 Tue Jun 18 13:06:49 UTC 2024 I: 1st build successful. Starting 2nd build on remote node ff64a-armhf-rb.debian.net. Tue Jun 18 13:06:49 UTC 2024 I: Preparing to do remote build '2' on ff64a-armhf-rb.debian.net. Tue Jun 18 13:11:24 UTC 2024 I: Deleting $TMPDIR on ff64a-armhf-rb.debian.net. Tue Jun 18 13:11:27 UTC 2024 I: qprint_1.1.dfsg.2-2.2_armhf.changes: Format: 1.8 Date: Sat, 01 Jun 2024 14:08:51 +0000 Source: qprint Binary: qprint qprint-dbgsym qprint-doc Architecture: armhf all Version: 1.1.dfsg.2-2.2 Distribution: unstable Urgency: medium Maintainer: Eugene V. Lyubimkin Changed-By: Bastian Germann Description: qprint - encoder and decoder for quoted-printable encoding qprint-doc - qprint quoted-printable encoder/decoder (documentation) Closes: 1007534 Changes: qprint (1.1.dfsg.2-2.2) unstable; urgency=medium . * Non-maintainer upload. * Convert to source format 3.0. (Closes: #1007534) * qprint-doc: Add Depends. * Make use of debian/clean file. Checksums-Sha1: b0f0c3272d3123ccb00ba03884f7ba856dbd2a15 9132 qprint-dbgsym_1.1.dfsg.2-2.2_armhf.deb 738bdb302ffb01911af2e506e8d07ab22972a106 267724 qprint-doc_1.1.dfsg.2-2.2_all.deb aa9278a772433f09ba0be4ffbc4aa6ecc8043153 5139 qprint_1.1.dfsg.2-2.2_armhf.buildinfo b1e9b9f1ab7712124c1bc94c8dc6f0f29785ee51 8816 qprint_1.1.dfsg.2-2.2_armhf.deb Checksums-Sha256: 54ba35b34013129514ac8d016fe0699abe5e8173c2496f562dbea1145b3ca7a8 9132 qprint-dbgsym_1.1.dfsg.2-2.2_armhf.deb 31e74a729a396891fb2d84dc243480ed4dbfe0115e62cc4adba25ab4446731ee 267724 qprint-doc_1.1.dfsg.2-2.2_all.deb 25d89fbe7a7e652179e4d7237a7434ac95dc136bafa74cb492af48c72e4ed93b 5139 qprint_1.1.dfsg.2-2.2_armhf.buildinfo dc6499f72e3edf15ae35fbcd5e5b52defcf473004f3d9d1832bd5360546d2099 8816 qprint_1.1.dfsg.2-2.2_armhf.deb Files: 6cb89f3c2717365292ca176920387e28 9132 debug optional qprint-dbgsym_1.1.dfsg.2-2.2_armhf.deb f04c1a60b79b15dc491b83262ca169d6 267724 doc optional qprint-doc_1.1.dfsg.2-2.2_all.deb 8592251fc0302c0775da561c2f9c4533 5139 utils optional qprint_1.1.dfsg.2-2.2_armhf.buildinfo eae77acf32f5175cf0886ab874687636 8816 utils optional qprint_1.1.dfsg.2-2.2_armhf.deb Tue Jun 18 13:11:28 UTC 2024 I: diffoscope 271 will be used to compare the two builds: Running as unit: rb-diffoscope-armhf_23-3710.service Warning: program compiled against libxml 212 using older 209 # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.VMnDF0RK/qprint_1.1.dfsg.2-2.2.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.VMnDF0RK/qprint_1.1.dfsg.2-2.2.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.VMnDF0RK/qprint_1.1.dfsg.2-2.2.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.VMnDF0RK/b1/qprint_1.1.dfsg.2-2.2_armhf.changes /srv/reproducible-results/rbuild-debian/r-b-build.VMnDF0RK/b2/qprint_1.1.dfsg.2-2.2_armhf.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.362s) 0.362s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.021s) 0.021s 12 calls diffoscope.comparators.binary.FilesystemFile ## specialize (total time: 0.000s) 0.000s 1 call specialize Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 700ms CPU time consumed: 701ms Tue Jun 18 13:11:29 UTC 2024 I: diffoscope 271 found no differences in the changes files, and a .buildinfo file also exists. Tue Jun 18 13:11:29 UTC 2024 I: qprint from trixie built successfully and reproducibly on armhf. Tue Jun 18 13:11:30 UTC 2024 I: Submitting .buildinfo files to external archives: Tue Jun 18 13:11:31 UTC 2024 I: Submitting 8.0K b1/qprint_1.1.dfsg.2-2.2_armhf.buildinfo.asc Tue Jun 18 13:11:31 UTC 2024 I: Submitting 8.0K b2/qprint_1.1.dfsg.2-2.2_armhf.buildinfo.asc Tue Jun 18 13:11:32 UTC 2024 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Tue Jun 18 13:11:32 UTC 2024 I: Done submitting .buildinfo files. Tue Jun 18 13:11:32 UTC 2024 I: Removing signed qprint_1.1.dfsg.2-2.2_armhf.buildinfo.asc files: removed './b1/qprint_1.1.dfsg.2-2.2_armhf.buildinfo.asc' removed './b2/qprint_1.1.dfsg.2-2.2_armhf.buildinfo.asc'