Fri Jun 7 06:31:16 UTC 2024 I: starting to build python-libtrace/trixie/armhf on jenkins on '2024-06-07 06:30' Fri Jun 7 06:31:16 UTC 2024 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/armhf_26/5521/console.log Fri Jun 7 06:31:16 UTC 2024 I: Downloading source for trixie/python-libtrace=1.6+git20180219-1.1 --2024-06-07 06:31:17-- http://deb.debian.org/debian/pool/main/p/python-libtrace/python-libtrace_1.6%2bgit20180219-1.1.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 1581 (1.5K) [text/prs.lines.tag] Saving to: ‘python-libtrace_1.6+git20180219-1.1.dsc’ 0K . 100% 250M=0s 2024-06-07 06:31:17 (250 MB/s) - ‘python-libtrace_1.6+git20180219-1.1.dsc’ saved [1581/1581] Fri Jun 7 06:31:17 UTC 2024 I: python-libtrace_1.6+git20180219-1.1.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: python-libtrace Binary: python3-libtrace Architecture: any Version: 1.6+git20180219-1.1 Maintainer: Internet Measurement Packaging Team Uploaders: Iain R. Learmonth Homepage: https://www.cs.auckland.ac.nz/~nevil/python-libtrace/ Standards-Version: 4.1.4 Vcs-Browser: https://salsa.debian.org/ineteng-team/python-libtrace Vcs-Git: https://salsa.debian.org/ineteng-team/python-libtrace.git Build-Depends: debhelper (>= 11), dh-python, python3-all-dev, libtrace3-dev, libldns-dev Package-List: python3-libtrace deb python optional arch=any Checksums-Sha1: 0d1d3daea708b9ba64ba54777970ac509b14589a 354348 python-libtrace_1.6+git20180219.orig.tar.gz 9d6769f1b1f284475aabce99851dc0d3d63cbee6 4968 python-libtrace_1.6+git20180219-1.1.debian.tar.xz Checksums-Sha256: 70f93e4974038d2e52290feebd9383c982a4b4e2b3b7a19c8a06443d7283ce84 354348 python-libtrace_1.6+git20180219.orig.tar.gz 222650f926e09d47d91dee28dc382caa8ba9c323b8741ed21a39e8bbc0bbe99a 4968 python-libtrace_1.6+git20180219-1.1.debian.tar.xz Files: 4278c61f508d44ba891ad73b3d4582f3 354348 python-libtrace_1.6+git20180219.orig.tar.gz 3500c5c4c7a5bc6bbc96eacb4badcf0b 4968 python-libtrace_1.6+git20180219-1.1.debian.tar.xz -----BEGIN PGP SIGNATURE----- iIoEARYKADIWIQTumtb5BSD6EfafSCRHew2wJjpU2AUCY3dcsRQcc3RlZmFub3JA ZGViaWFuLm9yZwAKCRBHew2wJjpU2Dt8AP9Z8o0bIuBvKFDuQ7nFQEpQX8BX25Ck jPQ4+Mxc6smt/QD/WZhYALgDnFKh0Mm0dmaob8AVs/MINBYVGs71yZ24GA8= =5maU -----END PGP SIGNATURE----- Fri Jun 7 06:31:17 UTC 2024 I: Checking whether the package is not for us Fri Jun 7 06:31:17 UTC 2024 I: Starting 1st build on remote node virt64z-armhf-rb.debian.net. Fri Jun 7 06:31:17 UTC 2024 I: Preparing to do remote build '1' on virt64z-armhf-rb.debian.net. Fri Jun 7 06:33:22 UTC 2024 I: Deleting $TMPDIR on virt64z-armhf-rb.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Thu Jun 6 18:31:24 -12 2024 I: pbuilder-time-stamp: 1717741884 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [python-libtrace_1.6+git20180219-1.1.dsc] I: copying [./python-libtrace_1.6+git20180219.orig.tar.gz] I: copying [./python-libtrace_1.6+git20180219-1.1.debian.tar.xz] I: Extracting source gpgv: Signature made Fri Nov 18 10:21:37 2022 gpgv: using EDDSA key EE9AD6F90520FA11F69F4824477B0DB0263A54D8 gpgv: issuer "stefanor@debian.org" gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./python-libtrace_1.6+git20180219-1.1.dsc: no acceptable signature found dpkg-source: info: extracting python-libtrace in python-libtrace-1.6+git20180219 dpkg-source: info: unpacking python-libtrace_1.6+git20180219.orig.tar.gz dpkg-source: info: unpacking python-libtrace_1.6+git20180219-1.1.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying spelling-fixes.patch dpkg-source: info: applying python3.11.patch I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/25852/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='armhf' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=3 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='armhf' IFS=' ' INVOCATION_ID='f6f60a5ec1744134bd6770654fafa90b' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='25852' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.tNrDo16b/pbuilderrc_wN7N --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.tNrDo16b/b1 --logfile b1/build.log python-libtrace_1.6+git20180219-1.1.dsc' SUDO_GID='110' SUDO_UID='103' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://10.0.0.15:3142/' I: uname -a Linux virt64z 6.1.0-21-arm64 #1 SMP Debian 6.1.90-1 (2024-05-03) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Jun 5 11:24 /bin -> usr/bin I: user script /srv/workspace/pbuilder/25852/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: armhf Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper (>= 11), dh-python, python3-all-dev, libtrace3-dev, libldns-dev dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19446 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper (>= 11); however: Package debhelper is not installed. pbuilder-satisfydepends-dummy depends on dh-python; however: Package dh-python is not installed. pbuilder-satisfydepends-dummy depends on python3-all-dev; however: Package python3-all-dev is not installed. pbuilder-satisfydepends-dummy depends on libtrace3-dev; however: Package libtrace3-dev is not installed. pbuilder-satisfydepends-dummy depends on libldns-dev; however: Package libldns-dev is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-python{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdbus-1-3{a} libdebhelper-perl{a} libelf1t64{a} libexpat1{a} libexpat1-dev{a} libfile-stripnondeterminism-perl{a} libicu72{a} libjs-jquery{a} libjs-sphinxdoc{a} libjs-underscore{a} libldns-dev{a} libldns3t64{a} libmagic-mgc{a} libmagic1t64{a} libpcap0.8t64{a} libpipeline1{a} libpython3-all-dev{a} libpython3-dev{a} libpython3-stdlib{a} libpython3.11-dev{a} libpython3.11-minimal{a} libpython3.11-stdlib{a} libpython3.11t64{a} libpython3.12-dev{a} libpython3.12-minimal{a} libpython3.12-stdlib{a} libpython3.12t64{a} libreadline8t64{a} libssl-dev{a} libtool{a} libtrace3-dev{a} libtrace3t64{a} libuchardet0{a} libwandio1t64{a} libxml2{a} m4{a} man-db{a} media-types{a} netbase{a} po-debconf{a} python3{a} python3-all{a} python3-all-dev{a} python3-dev{a} python3-distutils{a} python3-lib2to3{a} python3-minimal{a} python3-pkg-resources{a} python3-setuptools{a} python3.11{a} python3.11-dev{a} python3.11-minimal{a} python3.12{a} python3.12-dev{a} python3.12-minimal{a} readline-common{a} sensible-utils{a} tzdata{a} zlib1g-dev{a} The following packages are RECOMMENDED but will NOT be installed: ca-certificates curl dbus javascript-common libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 75 newly installed, 0 to remove and 0 not upgraded. Need to get 47.1 MB of archives. After unpacking 195 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main armhf libpython3.11-minimal armhf 3.11.9-1 [805 kB] Get: 2 http://deb.debian.org/debian trixie/main armhf libexpat1 armhf 2.6.2-1 [83.5 kB] Get: 3 http://deb.debian.org/debian trixie/main armhf python3.11-minimal armhf 3.11.9-1 [1600 kB] Get: 4 http://deb.debian.org/debian trixie/main armhf python3-minimal armhf 3.11.8-1 [26.3 kB] Get: 5 http://deb.debian.org/debian trixie/main armhf media-types all 10.1.0 [26.9 kB] Get: 6 http://deb.debian.org/debian trixie/main armhf netbase all 6.4 [12.8 kB] Get: 7 http://deb.debian.org/debian trixie/main armhf tzdata all 2024a-4 [255 kB] Get: 8 http://deb.debian.org/debian trixie/main armhf readline-common all 8.2-4 [69.3 kB] Get: 9 http://deb.debian.org/debian trixie/main armhf libreadline8t64 armhf 8.2-4 [145 kB] Get: 10 http://deb.debian.org/debian trixie/main armhf libpython3.11-stdlib armhf 3.11.9-1 [1704 kB] Get: 11 http://deb.debian.org/debian trixie/main armhf python3.11 armhf 3.11.9-1 [602 kB] Get: 12 http://deb.debian.org/debian trixie/main armhf libpython3-stdlib armhf 3.11.8-1 [9332 B] Get: 13 http://deb.debian.org/debian trixie/main armhf python3 armhf 3.11.8-1 [27.4 kB] Get: 14 http://deb.debian.org/debian trixie/main armhf libpython3.12-minimal armhf 3.12.3-1 [795 kB] Get: 15 http://deb.debian.org/debian trixie/main armhf python3.12-minimal armhf 3.12.3-1 [1783 kB] Get: 16 http://deb.debian.org/debian trixie/main armhf sensible-utils all 0.0.22 [22.4 kB] Get: 17 http://deb.debian.org/debian trixie/main armhf libmagic-mgc armhf 1:5.45-3 [314 kB] Get: 18 http://deb.debian.org/debian trixie/main armhf libmagic1t64 armhf 1:5.45-3 [98.1 kB] Get: 19 http://deb.debian.org/debian trixie/main armhf file armhf 1:5.45-3 [42.0 kB] Get: 20 http://deb.debian.org/debian trixie/main armhf gettext-base armhf 0.21-14+b1 [157 kB] Get: 21 http://deb.debian.org/debian trixie/main armhf libuchardet0 armhf 0.0.8-1+b1 [65.7 kB] Get: 22 http://deb.debian.org/debian trixie/main armhf groff-base armhf 1.23.0-4 [1090 kB] Get: 23 http://deb.debian.org/debian trixie/main armhf bsdextrautils armhf 2.40.1-8 [87.7 kB] Get: 24 http://deb.debian.org/debian trixie/main armhf libpipeline1 armhf 1.5.7-2 [33.3 kB] Get: 25 http://deb.debian.org/debian trixie/main armhf man-db armhf 2.12.1-1 [1375 kB] Get: 26 http://deb.debian.org/debian trixie/main armhf m4 armhf 1.4.19-4 [264 kB] Get: 27 http://deb.debian.org/debian trixie/main armhf autoconf all 2.71-3 [332 kB] Get: 28 http://deb.debian.org/debian trixie/main armhf autotools-dev all 20220109.1 [51.6 kB] Get: 29 http://deb.debian.org/debian trixie/main armhf automake all 1:1.16.5-1.3 [823 kB] Get: 30 http://deb.debian.org/debian trixie/main armhf autopoint all 0.21-14 [496 kB] Get: 31 http://deb.debian.org/debian trixie/main armhf libdebhelper-perl all 13.15.3 [88.0 kB] Get: 32 http://deb.debian.org/debian trixie/main armhf libtool all 2.4.7-7 [517 kB] Get: 33 http://deb.debian.org/debian trixie/main armhf dh-autoreconf all 20 [17.1 kB] Get: 34 http://deb.debian.org/debian trixie/main armhf libarchive-zip-perl all 1.68-1 [104 kB] Get: 35 http://deb.debian.org/debian trixie/main armhf libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get: 36 http://deb.debian.org/debian trixie/main armhf dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get: 37 http://deb.debian.org/debian trixie/main armhf libelf1t64 armhf 0.191-1+b1 [183 kB] Get: 38 http://deb.debian.org/debian trixie/main armhf dwz armhf 0.15-1+b2 [106 kB] Get: 39 http://deb.debian.org/debian trixie/main armhf libicu72 armhf 72.1-4+b1 [9070 kB] Get: 40 http://deb.debian.org/debian trixie/main armhf libxml2 armhf 2.9.14+dfsg-1.3+b3 [598 kB] Get: 41 http://deb.debian.org/debian trixie/main armhf gettext armhf 0.21-14+b1 [1230 kB] Get: 42 http://deb.debian.org/debian trixie/main armhf intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 43 http://deb.debian.org/debian trixie/main armhf po-debconf all 1.0.21+nmu1 [248 kB] Get: 44 http://deb.debian.org/debian trixie/main armhf debhelper all 13.15.3 [901 kB] Get: 45 http://deb.debian.org/debian trixie/main armhf python3-pkg-resources all 68.1.2-2 [241 kB] Get: 46 http://deb.debian.org/debian trixie/main armhf python3-lib2to3 all 3.12.3-3.1 [77.7 kB] Get: 47 http://deb.debian.org/debian trixie/main armhf python3-distutils all 3.12.3-3.1 [131 kB] Get: 48 http://deb.debian.org/debian trixie/main armhf python3-setuptools all 68.1.2-2 [468 kB] Get: 49 http://deb.debian.org/debian trixie/main armhf dh-python all 6.20240422 [107 kB] Get: 50 http://deb.debian.org/debian trixie/main armhf libdbus-1-3 armhf 1.14.10-4+b1 [181 kB] Get: 51 http://deb.debian.org/debian trixie/main armhf libexpat1-dev armhf 2.6.2-1 [140 kB] Get: 52 http://deb.debian.org/debian trixie/main armhf libjs-jquery all 3.6.1+dfsg+~3.5.14-1 [326 kB] Get: 53 http://deb.debian.org/debian trixie/main armhf libjs-underscore all 1.13.4~dfsg+~1.11.4-3 [116 kB] Get: 54 http://deb.debian.org/debian trixie/main armhf libjs-sphinxdoc all 7.2.6-8 [150 kB] Get: 55 http://deb.debian.org/debian trixie/main armhf libldns3t64 armhf 1.8.3-2 [149 kB] Get: 56 http://deb.debian.org/debian trixie/main armhf libssl-dev armhf 3.2.1-3 [2348 kB] Get: 57 http://deb.debian.org/debian trixie/main armhf libldns-dev armhf 1.8.3-2 [1316 kB] Get: 58 http://deb.debian.org/debian trixie/main armhf libpcap0.8t64 armhf 1.10.4-5 [148 kB] Get: 59 http://deb.debian.org/debian trixie/main armhf libpython3.11t64 armhf 3.11.9-1 [1674 kB] Get: 60 http://deb.debian.org/debian trixie/main armhf zlib1g-dev armhf 1:1.3.dfsg+really1.3.1-1 [904 kB] Get: 61 http://deb.debian.org/debian trixie/main armhf libpython3.11-dev armhf 3.11.9-1 [3108 kB] Get: 62 http://deb.debian.org/debian trixie/main armhf libpython3-dev armhf 3.11.8-1 [9560 B] Get: 63 http://deb.debian.org/debian trixie/main armhf libpython3.12-stdlib armhf 3.12.3-1 [1808 kB] Get: 64 http://deb.debian.org/debian trixie/main armhf libpython3.12t64 armhf 3.12.3-1 [1820 kB] Get: 65 http://deb.debian.org/debian trixie/main armhf libpython3.12-dev armhf 3.12.3-1 [3754 kB] Get: 66 http://deb.debian.org/debian trixie/main armhf libpython3-all-dev armhf 3.11.8-1 [1072 B] Get: 67 http://deb.debian.org/debian trixie/main armhf libwandio1t64 armhf 3.0.22-0.2 [11.3 kB] Get: 68 http://deb.debian.org/debian trixie/main armhf libtrace3t64 armhf 3.0.22-0.2 [35.8 kB] Get: 69 http://deb.debian.org/debian trixie/main armhf libtrace3-dev armhf 3.0.22-0.2 [69.6 kB] Get: 70 http://deb.debian.org/debian trixie/main armhf python3.12 armhf 3.12.3-1 [659 kB] Get: 71 http://deb.debian.org/debian trixie/main armhf python3-all armhf 3.11.8-1 [1056 B] Get: 72 http://deb.debian.org/debian trixie/main armhf python3.11-dev armhf 3.11.9-1 [501 kB] Get: 73 http://deb.debian.org/debian trixie/main armhf python3-dev armhf 3.11.8-1 [26.1 kB] Get: 74 http://deb.debian.org/debian trixie/main armhf python3.12-dev armhf 3.12.3-1 [499 kB] Get: 75 http://deb.debian.org/debian trixie/main armhf python3-all-dev armhf 3.11.8-1 [1072 B] Fetched 47.1 MB in 1s (68.7 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package libpython3.11-minimal:armhf. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19446 files and directories currently installed.) Preparing to unpack .../libpython3.11-minimal_3.11.9-1_armhf.deb ... Unpacking libpython3.11-minimal:armhf (3.11.9-1) ... Selecting previously unselected package libexpat1:armhf. Preparing to unpack .../libexpat1_2.6.2-1_armhf.deb ... Unpacking libexpat1:armhf (2.6.2-1) ... Selecting previously unselected package python3.11-minimal. Preparing to unpack .../python3.11-minimal_3.11.9-1_armhf.deb ... Unpacking python3.11-minimal (3.11.9-1) ... Setting up libpython3.11-minimal:armhf (3.11.9-1) ... Setting up libexpat1:armhf (2.6.2-1) ... Setting up python3.11-minimal (3.11.9-1) ... Selecting previously unselected package python3-minimal. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19762 files and directories currently installed.) Preparing to unpack .../0-python3-minimal_3.11.8-1_armhf.deb ... Unpacking python3-minimal (3.11.8-1) ... Selecting previously unselected package media-types. Preparing to unpack .../1-media-types_10.1.0_all.deb ... Unpacking media-types (10.1.0) ... Selecting previously unselected package netbase. Preparing to unpack .../2-netbase_6.4_all.deb ... Unpacking netbase (6.4) ... Selecting previously unselected package tzdata. Preparing to unpack .../3-tzdata_2024a-4_all.deb ... Unpacking tzdata (2024a-4) ... Selecting previously unselected package readline-common. Preparing to unpack .../4-readline-common_8.2-4_all.deb ... Unpacking readline-common (8.2-4) ... Selecting previously unselected package libreadline8t64:armhf. Preparing to unpack .../5-libreadline8t64_8.2-4_armhf.deb ... Adding 'diversion of /lib/arm-linux-gnueabihf/libhistory.so.8 to /lib/arm-linux-gnueabihf/libhistory.so.8.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/arm-linux-gnueabihf/libhistory.so.8.2 to /lib/arm-linux-gnueabihf/libhistory.so.8.2.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/arm-linux-gnueabihf/libreadline.so.8 to /lib/arm-linux-gnueabihf/libreadline.so.8.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/arm-linux-gnueabihf/libreadline.so.8.2 to /lib/arm-linux-gnueabihf/libreadline.so.8.2.usr-is-merged by libreadline8t64' Unpacking libreadline8t64:armhf (8.2-4) ... Selecting previously unselected package libpython3.11-stdlib:armhf. Preparing to unpack .../6-libpython3.11-stdlib_3.11.9-1_armhf.deb ... Unpacking libpython3.11-stdlib:armhf (3.11.9-1) ... Selecting previously unselected package python3.11. Preparing to unpack .../7-python3.11_3.11.9-1_armhf.deb ... Unpacking python3.11 (3.11.9-1) ... Selecting previously unselected package libpython3-stdlib:armhf. Preparing to unpack .../8-libpython3-stdlib_3.11.8-1_armhf.deb ... Unpacking libpython3-stdlib:armhf (3.11.8-1) ... Setting up python3-minimal (3.11.8-1) ... Selecting previously unselected package python3. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20754 files and directories currently installed.) Preparing to unpack .../00-python3_3.11.8-1_armhf.deb ... Unpacking python3 (3.11.8-1) ... Selecting previously unselected package libpython3.12-minimal:armhf. Preparing to unpack .../01-libpython3.12-minimal_3.12.3-1_armhf.deb ... Unpacking libpython3.12-minimal:armhf (3.12.3-1) ... Selecting previously unselected package python3.12-minimal. Preparing to unpack .../02-python3.12-minimal_3.12.3-1_armhf.deb ... Unpacking python3.12-minimal (3.12.3-1) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../03-sensible-utils_0.0.22_all.deb ... Unpacking sensible-utils (0.0.22) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../04-libmagic-mgc_1%3a5.45-3_armhf.deb ... Unpacking libmagic-mgc (1:5.45-3) ... Selecting previously unselected package libmagic1t64:armhf. Preparing to unpack .../05-libmagic1t64_1%3a5.45-3_armhf.deb ... Unpacking libmagic1t64:armhf (1:5.45-3) ... Selecting previously unselected package file. Preparing to unpack .../06-file_1%3a5.45-3_armhf.deb ... Unpacking file (1:5.45-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../07-gettext-base_0.21-14+b1_armhf.deb ... Unpacking gettext-base (0.21-14+b1) ... Selecting previously unselected package libuchardet0:armhf. Preparing to unpack .../08-libuchardet0_0.0.8-1+b1_armhf.deb ... Unpacking libuchardet0:armhf (0.0.8-1+b1) ... Selecting previously unselected package groff-base. Preparing to unpack .../09-groff-base_1.23.0-4_armhf.deb ... Unpacking groff-base (1.23.0-4) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../10-bsdextrautils_2.40.1-8_armhf.deb ... Unpacking bsdextrautils (2.40.1-8) ... Selecting previously unselected package libpipeline1:armhf. Preparing to unpack .../11-libpipeline1_1.5.7-2_armhf.deb ... Unpacking libpipeline1:armhf (1.5.7-2) ... Selecting previously unselected package man-db. Preparing to unpack .../12-man-db_2.12.1-1_armhf.deb ... Unpacking man-db (2.12.1-1) ... Selecting previously unselected package m4. Preparing to unpack .../13-m4_1.4.19-4_armhf.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../14-autoconf_2.71-3_all.deb ... Unpacking autoconf (2.71-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../15-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../16-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../17-autopoint_0.21-14_all.deb ... Unpacking autopoint (0.21-14) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../18-libdebhelper-perl_13.15.3_all.deb ... Unpacking libdebhelper-perl (13.15.3) ... Selecting previously unselected package libtool. Preparing to unpack .../19-libtool_2.4.7-7_all.deb ... Unpacking libtool (2.4.7-7) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../20-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../21-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../22-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../23-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:armhf. Preparing to unpack .../24-libelf1t64_0.191-1+b1_armhf.deb ... Unpacking libelf1t64:armhf (0.191-1+b1) ... Selecting previously unselected package dwz. Preparing to unpack .../25-dwz_0.15-1+b2_armhf.deb ... Unpacking dwz (0.15-1+b2) ... Selecting previously unselected package libicu72:armhf. Preparing to unpack .../26-libicu72_72.1-4+b1_armhf.deb ... Unpacking libicu72:armhf (72.1-4+b1) ... Selecting previously unselected package libxml2:armhf. Preparing to unpack .../27-libxml2_2.9.14+dfsg-1.3+b3_armhf.deb ... Unpacking libxml2:armhf (2.9.14+dfsg-1.3+b3) ... Selecting previously unselected package gettext. Preparing to unpack .../28-gettext_0.21-14+b1_armhf.deb ... Unpacking gettext (0.21-14+b1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../29-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../30-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../31-debhelper_13.15.3_all.deb ... Unpacking debhelper (13.15.3) ... Selecting previously unselected package python3-pkg-resources. Preparing to unpack .../32-python3-pkg-resources_68.1.2-2_all.deb ... Unpacking python3-pkg-resources (68.1.2-2) ... Selecting previously unselected package python3-lib2to3. Preparing to unpack .../33-python3-lib2to3_3.12.3-3.1_all.deb ... Unpacking python3-lib2to3 (3.12.3-3.1) ... Selecting previously unselected package python3-distutils. Preparing to unpack .../34-python3-distutils_3.12.3-3.1_all.deb ... Unpacking python3-distutils (3.12.3-3.1) ... Selecting previously unselected package python3-setuptools. Preparing to unpack .../35-python3-setuptools_68.1.2-2_all.deb ... Unpacking python3-setuptools (68.1.2-2) ... Selecting previously unselected package dh-python. Preparing to unpack .../36-dh-python_6.20240422_all.deb ... Unpacking dh-python (6.20240422) ... Selecting previously unselected package libdbus-1-3:armhf. Preparing to unpack .../37-libdbus-1-3_1.14.10-4+b1_armhf.deb ... Unpacking libdbus-1-3:armhf (1.14.10-4+b1) ... Selecting previously unselected package libexpat1-dev:armhf. Preparing to unpack .../38-libexpat1-dev_2.6.2-1_armhf.deb ... Unpacking libexpat1-dev:armhf (2.6.2-1) ... Selecting previously unselected package libjs-jquery. Preparing to unpack .../39-libjs-jquery_3.6.1+dfsg+~3.5.14-1_all.deb ... Unpacking libjs-jquery (3.6.1+dfsg+~3.5.14-1) ... Selecting previously unselected package libjs-underscore. Preparing to unpack .../40-libjs-underscore_1.13.4~dfsg+~1.11.4-3_all.deb ... Unpacking libjs-underscore (1.13.4~dfsg+~1.11.4-3) ... Selecting previously unselected package libjs-sphinxdoc. Preparing to unpack .../41-libjs-sphinxdoc_7.2.6-8_all.deb ... Unpacking libjs-sphinxdoc (7.2.6-8) ... Selecting previously unselected package libldns3t64:armhf. Preparing to unpack .../42-libldns3t64_1.8.3-2_armhf.deb ... Unpacking libldns3t64:armhf (1.8.3-2) ... Selecting previously unselected package libssl-dev:armhf. Preparing to unpack .../43-libssl-dev_3.2.1-3_armhf.deb ... Unpacking libssl-dev:armhf (3.2.1-3) ... Selecting previously unselected package libldns-dev:armhf. Preparing to unpack .../44-libldns-dev_1.8.3-2_armhf.deb ... Unpacking libldns-dev:armhf (1.8.3-2) ... Selecting previously unselected package libpcap0.8t64:armhf. Preparing to unpack .../45-libpcap0.8t64_1.10.4-5_armhf.deb ... Unpacking libpcap0.8t64:armhf (1.10.4-5) ... Selecting previously unselected package libpython3.11t64:armhf. Preparing to unpack .../46-libpython3.11t64_3.11.9-1_armhf.deb ... Unpacking libpython3.11t64:armhf (3.11.9-1) ... Selecting previously unselected package zlib1g-dev:armhf. Preparing to unpack .../47-zlib1g-dev_1%3a1.3.dfsg+really1.3.1-1_armhf.deb ... Unpacking zlib1g-dev:armhf (1:1.3.dfsg+really1.3.1-1) ... Selecting previously unselected package libpython3.11-dev:armhf. Preparing to unpack .../48-libpython3.11-dev_3.11.9-1_armhf.deb ... Unpacking libpython3.11-dev:armhf (3.11.9-1) ... Selecting previously unselected package libpython3-dev:armhf. Preparing to unpack .../49-libpython3-dev_3.11.8-1_armhf.deb ... Unpacking libpython3-dev:armhf (3.11.8-1) ... Selecting previously unselected package libpython3.12-stdlib:armhf. Preparing to unpack .../50-libpython3.12-stdlib_3.12.3-1_armhf.deb ... Unpacking libpython3.12-stdlib:armhf (3.12.3-1) ... Selecting previously unselected package libpython3.12t64:armhf. Preparing to unpack .../51-libpython3.12t64_3.12.3-1_armhf.deb ... Unpacking libpython3.12t64:armhf (3.12.3-1) ... Selecting previously unselected package libpython3.12-dev:armhf. Preparing to unpack .../52-libpython3.12-dev_3.12.3-1_armhf.deb ... Unpacking libpython3.12-dev:armhf (3.12.3-1) ... Selecting previously unselected package libpython3-all-dev:armhf. Preparing to unpack .../53-libpython3-all-dev_3.11.8-1_armhf.deb ... Unpacking libpython3-all-dev:armhf (3.11.8-1) ... Selecting previously unselected package libwandio1t64. Preparing to unpack .../54-libwandio1t64_3.0.22-0.2_armhf.deb ... Unpacking libwandio1t64 (3.0.22-0.2) ... Selecting previously unselected package libtrace3t64. Preparing to unpack .../55-libtrace3t64_3.0.22-0.2_armhf.deb ... Unpacking libtrace3t64 (3.0.22-0.2) ... Selecting previously unselected package libtrace3-dev. Preparing to unpack .../56-libtrace3-dev_3.0.22-0.2_armhf.deb ... Unpacking libtrace3-dev (3.0.22-0.2) ... Selecting previously unselected package python3.12. Preparing to unpack .../57-python3.12_3.12.3-1_armhf.deb ... Unpacking python3.12 (3.12.3-1) ... Selecting previously unselected package python3-all. Preparing to unpack .../58-python3-all_3.11.8-1_armhf.deb ... Unpacking python3-all (3.11.8-1) ... Selecting previously unselected package python3.11-dev. Preparing to unpack .../59-python3.11-dev_3.11.9-1_armhf.deb ... Unpacking python3.11-dev (3.11.9-1) ... Selecting previously unselected package python3-dev. Preparing to unpack .../60-python3-dev_3.11.8-1_armhf.deb ... Unpacking python3-dev (3.11.8-1) ... Selecting previously unselected package python3.12-dev. Preparing to unpack .../61-python3.12-dev_3.12.3-1_armhf.deb ... Unpacking python3.12-dev (3.12.3-1) ... Selecting previously unselected package python3-all-dev. Preparing to unpack .../62-python3-all-dev_3.11.8-1_armhf.deb ... Unpacking python3-all-dev (3.11.8-1) ... Setting up media-types (10.1.0) ... Setting up libpipeline1:armhf (1.5.7-2) ... Setting up libicu72:armhf (72.1-4+b1) ... Setting up bsdextrautils (2.40.1-8) ... Setting up libmagic-mgc (1:5.45-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libldns3t64:armhf (1.8.3-2) ... Setting up libdebhelper-perl (13.15.3) ... Setting up libmagic1t64:armhf (1:5.45-3) ... Setting up libpython3.12-minimal:armhf (3.12.3-1) ... Setting up gettext-base (0.21-14+b1) ... Setting up m4 (1.4.19-4) ... Setting up file (1:5.45-3) ... Setting up libelf1t64:armhf (0.191-1+b1) ... Setting up libwandio1t64 (3.0.22-0.2) ... Setting up tzdata (2024a-4) ... Current default time zone: 'Etc/UTC' Local time is now: Fri Jun 7 06:32:06 UTC 2024. Universal Time is now: Fri Jun 7 06:32:06 UTC 2024. Run 'dpkg-reconfigure tzdata' if you wish to change it. Setting up autotools-dev (20220109.1) ... Setting up libexpat1-dev:armhf (2.6.2-1) ... Setting up libdbus-1-3:armhf (1.14.10-4+b1) ... Setting up libssl-dev:armhf (3.2.1-3) ... Setting up autopoint (0.21-14) ... Setting up autoconf (2.71-3) ... Setting up zlib1g-dev:armhf (1:1.3.dfsg+really1.3.1-1) ... Setting up dwz (0.15-1+b2) ... Setting up sensible-utils (0.0.22) ... Setting up libuchardet0:armhf (0.0.8-1+b1) ... Setting up libpcap0.8t64:armhf (1.10.4-5) ... Setting up netbase (6.4) ... Setting up libjs-jquery (3.6.1+dfsg+~3.5.14-1) ... Setting up readline-common (8.2-4) ... Setting up libxml2:armhf (2.9.14+dfsg-1.3+b3) ... Setting up libjs-underscore (1.13.4~dfsg+~1.11.4-3) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up python3.12-minimal (3.12.3-1) ... Setting up gettext (0.21-14+b1) ... Setting up libtool (2.4.7-7) ... Setting up libtrace3t64 (3.0.22-0.2) ... Setting up libldns-dev:armhf (1.8.3-2) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up libjs-sphinxdoc (7.2.6-8) ... Setting up libreadline8t64:armhf (8.2-4) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up groff-base (1.23.0-4) ... Setting up libtrace3-dev (3.0.22-0.2) ... Setting up libpython3.12-stdlib:armhf (3.12.3-1) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up libpython3.11-stdlib:armhf (3.11.9-1) ... Setting up python3.12 (3.12.3-1) ... Setting up libpython3.11t64:armhf (3.11.9-1) ... Setting up man-db (2.12.1-1) ... Not building database; man-db/auto-update is not 'true'. Setting up libpython3.12t64:armhf (3.12.3-1) ... Setting up libpython3.11-dev:armhf (3.11.9-1) ... Setting up libpython3-stdlib:armhf (3.11.8-1) ... Setting up python3.11 (3.11.9-1) ... Setting up libpython3-dev:armhf (3.11.8-1) ... Setting up python3.11-dev (3.11.9-1) ... Setting up debhelper (13.15.3) ... Setting up python3 (3.11.8-1) ... Setting up libpython3.12-dev:armhf (3.12.3-1) ... Setting up libpython3-all-dev:armhf (3.11.8-1) ... Setting up python3.12-dev (3.12.3-1) ... Setting up python3-lib2to3 (3.12.3-3.1) ... Setting up python3-pkg-resources (68.1.2-2) ... Setting up python3-distutils (3.12.3-3.1) ... python3.12: can't get files for byte-compilation Setting up python3-setuptools (68.1.2-2) ... Setting up python3-all (3.11.8-1) ... Setting up python3-dev (3.11.8-1) ... Setting up dh-python (6.20240422) ... Setting up python3-all-dev (3.11.8-1) ... Processing triggers for libc-bin (2.38-12) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.33-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/reproducible-path/python-libtrace-1.6+git20180219/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../python-libtrace_1.6+git20180219-1.1_source.changes dpkg-buildpackage: info: source package python-libtrace dpkg-buildpackage: info: source version 1.6+git20180219-1.1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Stefano Rivera dpkg-source --before-build . dpkg-buildpackage: info: host architecture armhf fakeroot debian/rules clean dh clean --with python3 dh_auto_clean make -j3 distclean make[1]: Entering directory '/build/reproducible-path/python-libtrace-1.6+git20180219' cd lib/ipp; rm -rf build *~ #* .*~ cd lib/plt; rm -rf build *~ #* .*~ cd lib/natkit; rm -rf build *~ #* .*~ cd lib/pldns; rm -rf build *~ #* .*~ rm -rf build *~ #* .*~ make[1]: Leaving directory '/build/reproducible-path/python-libtrace-1.6+git20180219' dh_clean debian/rules build dh build --with python3 dh_update_autotools_config dh_autoreconf dh_auto_configure debian/rules override_dh_auto_build make[1]: Entering directory '/build/reproducible-path/python-libtrace-1.6+git20180219' set -e && for pyvers in 3.12 3.11; do \ ( cd lib/ipp; python$pyvers ipp-setup.py build ); \ ( cd lib/plt; python$pyvers plt-setup.py build ); \ ( cd lib/natkit; python$pyvers natkit-setup.py build ); \ ( cd lib/pldns; python$pyvers pldns-setup.py build ); \ done ip.c: In function 'get_frag_offset': ip.c:124:4: warning: converting a packed 'libtrace_ip_t' {aka 'struct libtrace_ip'} pointer (alignment 1) to a 'uint16_t' {aka 'short unsigned int'} pointer (alignment 2) may result in an unaligned pointer value [-Waddress-of-packed-member] 124 | uint16_t *nofp = (uint16_t *)lip; | ^~~~~~~~ In file included from ip.c:26: /usr/include/libtrace.h:565:16: note: defined here 565 | typedef struct libtrace_ip | ^~~~~~~~~~~ In file included from outputtrace.c:27: outputtrace.c: In function 'pltOutputTrace_init': outputtrace.c:53:19: warning: '%s' directive output may be truncated writing up to 254 bytes into a region of size 91 [-Wformat-truncation=] 53 | set_err_msg("Couldn't create outputTrace: %s", lte.problem); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~ ../include/plt.h:121:47: note: in definition of macro 'set_err_msg' 121 | snprintf(plt_err_msg, sizeof(plt_err_msg), fmt, v1) | ^~~ outputtrace.c:53:49: note: format string is defined here 53 | set_err_msg("Couldn't create outputTrace: %s", lte.problem); | ^~ In file included from /usr/include/stdio.h:964, from /usr/include/python3.12/Python.h:24, from outputtrace.c:23: In function 'snprintf', inlined from 'pltOutputTrace_init' at outputtrace.c:53:7: /usr/include/arm-linux-gnueabihf/bits/stdio2.h:54:10: note: '__builtin___snprintf_chk' output between 30 and 284 bytes into a destination of size 120 54 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 55 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 56 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ outputtrace.c: In function 'outputTrace_write': outputtrace.c:157:19: warning: '%s' directive output may be truncated writing up to 254 bytes into a region of size 94 [-Wformat-truncation=] 157 | set_err_msg("OutputTrace_write failed: %s", lte.problem); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~ ../include/plt.h:121:47: note: in definition of macro 'set_err_msg' 121 | snprintf(plt_err_msg, sizeof(plt_err_msg), fmt, v1) | ^~~ outputtrace.c:157:46: note: format string is defined here 157 | set_err_msg("OutputTrace_write failed: %s", lte.problem); | ^~ In function 'snprintf', inlined from 'outputTrace_write' at outputtrace.c:157:7: /usr/include/arm-linux-gnueabihf/bits/stdio2.h:54:10: note: '__builtin___snprintf_chk' output between 27 and 281 bytes into a destination of size 120 54 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 55 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 56 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ outputtrace.c: In function 'output_conf_compress_level': outputtrace.c:117:19: warning: '%s' directive output may be truncated writing up to 254 bytes into a region of size 80 [-Wformat-truncation=] 117 | set_err_msg("Couldn't set OutputTrace compress_type: %s", lte.problem); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~ ../include/plt.h:121:47: note: in definition of macro 'set_err_msg' 121 | snprintf(plt_err_msg, sizeof(plt_err_msg), fmt, v1) | ^~~ outputtrace.c:117:60: note: format string is defined here 117 | set_err_msg("Couldn't set OutputTrace compress_type: %s", lte.problem); | ^~ In function 'snprintf', inlined from 'output_conf_compress_level' at outputtrace.c:117:7: /usr/include/arm-linux-gnueabihf/bits/stdio2.h:54:10: note: '__builtin___snprintf_chk' output between 41 and 295 bytes into a destination of size 120 54 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 55 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 56 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ outputtrace.c: In function 'output_conf_compress_type': outputtrace.c:102:19: warning: '%s' directive output may be truncated writing up to 254 bytes into a region of size 80 [-Wformat-truncation=] 102 | set_err_msg("Couldn't set OutputTrace compress_type: %s", lte.problem); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~ ../include/plt.h:121:47: note: in definition of macro 'set_err_msg' 121 | snprintf(plt_err_msg, sizeof(plt_err_msg), fmt, v1) | ^~~ outputtrace.c:102:60: note: format string is defined here 102 | set_err_msg("Couldn't set OutputTrace compress_type: %s", lte.problem); | ^~ In function 'snprintf', inlined from 'output_conf_compress_type' at outputtrace.c:102:7: /usr/include/arm-linux-gnueabihf/bits/stdio2.h:54:10: note: '__builtin___snprintf_chk' output between 41 and 295 bytes into a destination of size 120 54 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 55 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 56 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ outputtrace.c: In function 'outputTrace_plt_start.part.0.isra': outputtrace.c:127:19: warning: '%s' directive output may be truncated writing up to 254 bytes into a region of size 92 [-Wformat-truncation=] 127 | set_err_msg("Couldn't start OutputTrace: %s", lte.problem); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~ ../include/plt.h:121:47: note: in definition of macro 'set_err_msg' 121 | snprintf(plt_err_msg, sizeof(plt_err_msg), fmt, v1) | ^~~ outputtrace.c:127:48: note: format string is defined here 127 | set_err_msg("Couldn't start OutputTrace: %s", lte.problem); | ^~ In function 'snprintf', inlined from 'outputTrace_plt_start.part.0.isra' at outputtrace.c:127:7: /usr/include/arm-linux-gnueabihf/bits/stdio2.h:54:10: note: '__builtin___snprintf_chk' output between 29 and 283 bytes into a destination of size 120 54 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 55 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 56 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ packet.c: In function 'initpacket': packet.c:591:4: warning: this 'if' clause does not guard... [-Wmisleading-indentation] 591 | if (out_v == NULL) return; Py_INCREF(out_v); | ^~ In file included from /usr/include/python3.12/Python.h:44, from packet.c:24: /usr/include/python3.12/object.h:661:25: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the 'if' 661 | # define Py_INCREF(op) Py_INCREF(_PyObject_CAST(op)) | ^~~~~~~~~ packet.c:591:32: note: in expansion of macro 'Py_INCREF' 591 | if (out_v == NULL) return; Py_INCREF(out_v); | ^~~~~~~~~ packet.c:595:4: warning: this 'if' clause does not guard... [-Wmisleading-indentation] 595 | if (in_v == NULL) return; Py_INCREF(in_v); | ^~ /usr/include/python3.12/object.h:661:25: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the 'if' 661 | # define Py_INCREF(op) Py_INCREF(_PyObject_CAST(op)) | ^~~~~~~~~ packet.c:595:31: note: in expansion of macro 'Py_INCREF' 595 | if (in_v == NULL) return; Py_INCREF(in_v); | ^~~~~~~~~ packet.c:599:4: warning: this 'if' clause does not guard... [-Wmisleading-indentation] 599 | if (other_v == NULL) return; Py_INCREF(other_v); | ^~ /usr/include/python3.12/object.h:661:25: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the 'if' 661 | # define Py_INCREF(op) Py_INCREF(_PyObject_CAST(op)) | ^~~~~~~~~ packet.c:599:34: note: in expansion of macro 'Py_INCREF' 599 | if (other_v == NULL) return; Py_INCREF(other_v); | ^~~~~~~~~ pltmodule.c: In function 'transport_checksum': pltmodule.c:207:18: warning: taking address of packed member of 'struct libtrace_icmp' may result in an unaligned pointer value [-Waddress-of-packed-member] 207 | check = &icmp_header->checksum; | ^~~~~~~~~~~~~~~~~~~~~~ pltmodule.c:216:21: warning: taking address of packed member of 'struct libtrace_tcp' may result in an unaligned pointer value [-Waddress-of-packed-member] 216 | check = &tcp_header->check; | ^~~~~~~~~~~~~~~~~~ pltmodule.c:220:21: warning: taking address of packed member of 'struct libtrace_udp' may result in an unaligned pointer value [-Waddress-of-packed-member] 220 | check = &udp_header->check; | ^~~~~~~~~~~~~~~~~~ pltmodule.c:235:18: warning: taking address of packed member of 'struct libtrace_tcp' may result in an unaligned pointer value [-Waddress-of-packed-member] 235 | check = &tcp_header->check; | ^~~~~~~~~~~~~~~~~~ pltmodule.c:239:18: warning: taking address of packed member of 'struct libtrace_udp' may result in an unaligned pointer value [-Waddress-of-packed-member] 239 | check = &udp_header->check; | ^~~~~~~~~~~~~~~~~~ pltmodule.c:243:18: warning: taking address of packed member of 'struct libtrace_icmp6' may result in an unaligned pointer value [-Waddress-of-packed-member] 243 | check = &icmp_header->checksum; | ^~~~~~~~~~~~~~~~~~~~~~ tcp.c: In function 'get_flags': tcp.c:146:4: warning: converting a packed 'libtrace_tcp_t' {aka 'struct libtrace_tcp'} pointer (alignment 1) to a 'uint16_t' {aka 'short unsigned int'} pointer (alignment 2) may result in an unaligned pointer value [-Waddress-of-packed-member] 146 | uint16_t *t16p = (uint16_t *)ltcp; | ^~~~~~~~ In file included from tcp.c:27: /usr/include/libtrace.h:618:16: note: defined here 618 | typedef struct libtrace_tcp | ^~~~~~~~~~~~ In file included from trace.c:27: trace.c: In function 'trace_plt_pause': trace.c:152:19: warning: '%s' directive output may be truncated writing up to 254 bytes into a region of size 98 [-Wformat-truncation=] 152 | set_err_msg("Couldn't pause trace: %s", lte.problem); | ^~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~ ../include/plt.h:121:47: note: in definition of macro 'set_err_msg' 121 | snprintf(plt_err_msg, sizeof(plt_err_msg), fmt, v1) | ^~~ trace.c:152:42: note: format string is defined here 152 | set_err_msg("Couldn't pause trace: %s", lte.problem); | ^~ In file included from /usr/include/stdio.h:964, from /usr/include/python3.12/Python.h:24, from trace.c:23: In function 'snprintf', inlined from 'trace_plt_pause' at trace.c:152:7: /usr/include/arm-linux-gnueabihf/bits/stdio2.h:54:10: note: '__builtin___snprintf_chk' output between 23 and 277 bytes into a destination of size 120 54 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 55 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 56 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ trace.c: In function 'trace_conf_timeout': trace.c:98:59: warning: '%s' directive output may be truncated writing up to 254 bytes into a region of size 39 [-Wformat-truncation=] 98 | snprintf(msg, sizeof(msg), "trace_config failed: %s", err.problem); | ^~ ~~~~~~~~~~~ In function 'snprintf', inlined from 'trace_conf_timeout' at trace.c:98:3: /usr/include/arm-linux-gnueabihf/bits/stdio2.h:54:10: note: '__builtin___snprintf_chk' output between 22 and 276 bytes into a destination of size 60 54 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 55 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 56 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ trace.c: In function 'trace_plt_start.part.0.isra': trace.c:137:19: warning: '%s' directive output may be truncated writing up to 254 bytes into a region of size 98 [-Wformat-truncation=] 137 | set_err_msg("Couldn't start trace: %s", lte.problem); | ^~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~ ../include/plt.h:121:47: note: in definition of macro 'set_err_msg' 121 | snprintf(plt_err_msg, sizeof(plt_err_msg), fmt, v1) | ^~~ trace.c:137:42: note: format string is defined here 137 | set_err_msg("Couldn't start trace: %s", lte.problem); | ^~ In function 'snprintf', inlined from 'trace_plt_start.part.0.isra' at trace.c:137:7: /usr/include/arm-linux-gnueabihf/bits/stdio2.h:54:10: note: '__builtin___snprintf_chk' output between 23 and 277 bytes into a destination of size 120 54 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 55 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 56 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ trace.c: In function 'get_packet': trace.c:270:17: warning: '%s' directive output may be truncated writing up to 254 bytes into a region of size between 86 and 95 [-Wformat-truncation=] 270 | set_err_msg2("get packet failed: r=%d, %s", r, lte.problem); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~ ../include/plt.h:123:46: note: in definition of macro 'set_err_msg2' 123 | snprintf(plt_err_msg, sizeof(plt_err_msg), fmt, v1, v2) | ^~~ trace.c:270:43: note: format string is defined here 270 | set_err_msg2("get packet failed: r=%d, %s", r, lte.problem); | ^~ In function 'snprintf', inlined from 'get_packet' at trace.c:270:4: /usr/include/arm-linux-gnueabihf/bits/stdio2.h:54:10: note: '__builtin___snprintf_chk' output between 26 and 289 bytes into a destination of size 120 54 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 55 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 56 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ ip.c: In function 'get_frag_offset': ip.c:124:4: warning: converting a packed 'libtrace_ip_t' {aka 'struct libtrace_ip'} pointer (alignment 1) to a 'uint16_t' {aka 'short unsigned int'} pointer (alignment 2) may result in an unaligned pointer value [-Waddress-of-packed-member] 124 | uint16_t *nofp = (uint16_t *)lip; | ^~~~~~~~ In file included from ip.c:26: /usr/include/libtrace.h:565:16: note: defined here 565 | typedef struct libtrace_ip | ^~~~~~~~~~~ In file included from outputtrace.c:27: outputtrace.c: In function 'pltOutputTrace_init': outputtrace.c:53:19: warning: '%s' directive output may be truncated writing up to 254 bytes into a region of size 91 [-Wformat-truncation=] 53 | set_err_msg("Couldn't create outputTrace: %s", lte.problem); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~ ../include/plt.h:121:47: note: in definition of macro 'set_err_msg' 121 | snprintf(plt_err_msg, sizeof(plt_err_msg), fmt, v1) | ^~~ outputtrace.c:53:49: note: format string is defined here 53 | set_err_msg("Couldn't create outputTrace: %s", lte.problem); | ^~ In file included from /usr/include/stdio.h:964, from /usr/include/python3.11/Python.h:24, from outputtrace.c:23: In function 'snprintf', inlined from 'pltOutputTrace_init' at outputtrace.c:53:7: /usr/include/arm-linux-gnueabihf/bits/stdio2.h:54:10: note: '__builtin___snprintf_chk' output between 30 and 284 bytes into a destination of size 120 54 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 55 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 56 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ outputtrace.c: In function 'outputTrace_write': outputtrace.c:157:19: warning: '%s' directive output may be truncated writing up to 254 bytes into a region of size 94 [-Wformat-truncation=] 157 | set_err_msg("OutputTrace_write failed: %s", lte.problem); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~ ../include/plt.h:121:47: note: in definition of macro 'set_err_msg' 121 | snprintf(plt_err_msg, sizeof(plt_err_msg), fmt, v1) | ^~~ outputtrace.c:157:46: note: format string is defined here 157 | set_err_msg("OutputTrace_write failed: %s", lte.problem); | ^~ In function 'snprintf', inlined from 'outputTrace_write' at outputtrace.c:157:7: /usr/include/arm-linux-gnueabihf/bits/stdio2.h:54:10: note: '__builtin___snprintf_chk' output between 27 and 281 bytes into a destination of size 120 54 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 55 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 56 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ outputtrace.c: In function 'output_conf_compress_level': outputtrace.c:117:19: warning: '%s' directive output may be truncated writing up to 254 bytes into a region of size 80 [-Wformat-truncation=] 117 | set_err_msg("Couldn't set OutputTrace compress_type: %s", lte.problem); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~ ../include/plt.h:121:47: note: in definition of macro 'set_err_msg' 121 | snprintf(plt_err_msg, sizeof(plt_err_msg), fmt, v1) | ^~~ outputtrace.c:117:60: note: format string is defined here 117 | set_err_msg("Couldn't set OutputTrace compress_type: %s", lte.problem); | ^~ In function 'snprintf', inlined from 'output_conf_compress_level' at outputtrace.c:117:7: /usr/include/arm-linux-gnueabihf/bits/stdio2.h:54:10: note: '__builtin___snprintf_chk' output between 41 and 295 bytes into a destination of size 120 54 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 55 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 56 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ outputtrace.c: In function 'output_conf_compress_type': outputtrace.c:102:19: warning: '%s' directive output may be truncated writing up to 254 bytes into a region of size 80 [-Wformat-truncation=] 102 | set_err_msg("Couldn't set OutputTrace compress_type: %s", lte.problem); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~ ../include/plt.h:121:47: note: in definition of macro 'set_err_msg' 121 | snprintf(plt_err_msg, sizeof(plt_err_msg), fmt, v1) | ^~~ outputtrace.c:102:60: note: format string is defined here 102 | set_err_msg("Couldn't set OutputTrace compress_type: %s", lte.problem); | ^~ In function 'snprintf', inlined from 'output_conf_compress_type' at outputtrace.c:102:7: /usr/include/arm-linux-gnueabihf/bits/stdio2.h:54:10: note: '__builtin___snprintf_chk' output between 41 and 295 bytes into a destination of size 120 54 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 55 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 56 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ outputtrace.c: In function 'outputTrace_plt_start.part.0.isra': outputtrace.c:127:19: warning: '%s' directive output may be truncated writing up to 254 bytes into a region of size 92 [-Wformat-truncation=] 127 | set_err_msg("Couldn't start OutputTrace: %s", lte.problem); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~ ../include/plt.h:121:47: note: in definition of macro 'set_err_msg' 121 | snprintf(plt_err_msg, sizeof(plt_err_msg), fmt, v1) | ^~~ outputtrace.c:127:48: note: format string is defined here 127 | set_err_msg("Couldn't start OutputTrace: %s", lte.problem); | ^~ In function 'snprintf', inlined from 'outputTrace_plt_start.part.0.isra' at outputtrace.c:127:7: /usr/include/arm-linux-gnueabihf/bits/stdio2.h:54:10: note: '__builtin___snprintf_chk' output between 29 and 283 bytes into a destination of size 120 54 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 55 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 56 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ packet.c: In function 'initpacket': packet.c:591:4: warning: this 'if' clause does not guard... [-Wmisleading-indentation] 591 | if (out_v == NULL) return; Py_INCREF(out_v); | ^~ In file included from /usr/include/python3.11/Python.h:44, from packet.c:24: /usr/include/python3.11/object.h:506:25: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the 'if' 506 | # define Py_INCREF(op) Py_INCREF(_PyObject_CAST(op)) | ^~~~~~~~~ packet.c:591:32: note: in expansion of macro 'Py_INCREF' 591 | if (out_v == NULL) return; Py_INCREF(out_v); | ^~~~~~~~~ packet.c:595:4: warning: this 'if' clause does not guard... [-Wmisleading-indentation] 595 | if (in_v == NULL) return; Py_INCREF(in_v); | ^~ /usr/include/python3.11/object.h:506:25: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the 'if' 506 | # define Py_INCREF(op) Py_INCREF(_PyObject_CAST(op)) | ^~~~~~~~~ packet.c:595:31: note: in expansion of macro 'Py_INCREF' 595 | if (in_v == NULL) return; Py_INCREF(in_v); | ^~~~~~~~~ packet.c:599:4: warning: this 'if' clause does not guard... [-Wmisleading-indentation] 599 | if (other_v == NULL) return; Py_INCREF(other_v); | ^~ /usr/include/python3.11/object.h:506:25: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the 'if' 506 | # define Py_INCREF(op) Py_INCREF(_PyObject_CAST(op)) | ^~~~~~~~~ packet.c:599:34: note: in expansion of macro 'Py_INCREF' 599 | if (other_v == NULL) return; Py_INCREF(other_v); | ^~~~~~~~~ pltmodule.c: In function 'transport_checksum': pltmodule.c:207:18: warning: taking address of packed member of 'struct libtrace_icmp' may result in an unaligned pointer value [-Waddress-of-packed-member] 207 | check = &icmp_header->checksum; | ^~~~~~~~~~~~~~~~~~~~~~ pltmodule.c:216:21: warning: taking address of packed member of 'struct libtrace_tcp' may result in an unaligned pointer value [-Waddress-of-packed-member] 216 | check = &tcp_header->check; | ^~~~~~~~~~~~~~~~~~ pltmodule.c:220:21: warning: taking address of packed member of 'struct libtrace_udp' may result in an unaligned pointer value [-Waddress-of-packed-member] 220 | check = &udp_header->check; | ^~~~~~~~~~~~~~~~~~ pltmodule.c:235:18: warning: taking address of packed member of 'struct libtrace_tcp' may result in an unaligned pointer value [-Waddress-of-packed-member] 235 | check = &tcp_header->check; | ^~~~~~~~~~~~~~~~~~ pltmodule.c:239:18: warning: taking address of packed member of 'struct libtrace_udp' may result in an unaligned pointer value [-Waddress-of-packed-member] 239 | check = &udp_header->check; | ^~~~~~~~~~~~~~~~~~ pltmodule.c:243:18: warning: taking address of packed member of 'struct libtrace_icmp6' may result in an unaligned pointer value [-Waddress-of-packed-member] 243 | check = &icmp_header->checksum; | ^~~~~~~~~~~~~~~~~~~~~~ tcp.c: In function 'get_flags': tcp.c:146:4: warning: converting a packed 'libtrace_tcp_t' {aka 'struct libtrace_tcp'} pointer (alignment 1) to a 'uint16_t' {aka 'short unsigned int'} pointer (alignment 2) may result in an unaligned pointer value [-Waddress-of-packed-member] 146 | uint16_t *t16p = (uint16_t *)ltcp; | ^~~~~~~~ In file included from tcp.c:27: /usr/include/libtrace.h:618:16: note: defined here 618 | typedef struct libtrace_tcp | ^~~~~~~~~~~~ In file included from trace.c:27: trace.c: In function 'trace_plt_pause': trace.c:152:19: warning: '%s' directive output may be truncated writing up to 254 bytes into a region of size 98 [-Wformat-truncation=] 152 | set_err_msg("Couldn't pause trace: %s", lte.problem); | ^~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~ ../include/plt.h:121:47: note: in definition of macro 'set_err_msg' 121 | snprintf(plt_err_msg, sizeof(plt_err_msg), fmt, v1) | ^~~ trace.c:152:42: note: format string is defined here 152 | set_err_msg("Couldn't pause trace: %s", lte.problem); | ^~ In file included from /usr/include/stdio.h:964, from /usr/include/python3.11/Python.h:24, from trace.c:23: In function 'snprintf', inlined from 'trace_plt_pause' at trace.c:152:7: /usr/include/arm-linux-gnueabihf/bits/stdio2.h:54:10: note: '__builtin___snprintf_chk' output between 23 and 277 bytes into a destination of size 120 54 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 55 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 56 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ trace.c: In function 'trace_conf_timeout': trace.c:98:59: warning: '%s' directive output may be truncated writing up to 254 bytes into a region of size 39 [-Wformat-truncation=] 98 | snprintf(msg, sizeof(msg), "trace_config failed: %s", err.problem); | ^~ ~~~~~~~~~~~ In function 'snprintf', inlined from 'trace_conf_timeout' at trace.c:98:3: /usr/include/arm-linux-gnueabihf/bits/stdio2.h:54:10: note: '__builtin___snprintf_chk' output between 22 and 276 bytes into a destination of size 60 54 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 55 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 56 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ trace.c: In function 'trace_plt_start.part.0.isra': trace.c:137:19: warning: '%s' directive output may be truncated writing up to 254 bytes into a region of size 98 [-Wformat-truncation=] 137 | set_err_msg("Couldn't start trace: %s", lte.problem); | ^~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~ ../include/plt.h:121:47: note: in definition of macro 'set_err_msg' 121 | snprintf(plt_err_msg, sizeof(plt_err_msg), fmt, v1) | ^~~ trace.c:137:42: note: format string is defined here 137 | set_err_msg("Couldn't start trace: %s", lte.problem); | ^~ In function 'snprintf', inlined from 'trace_plt_start.part.0.isra' at trace.c:137:7: /usr/include/arm-linux-gnueabihf/bits/stdio2.h:54:10: note: '__builtin___snprintf_chk' output between 23 and 277 bytes into a destination of size 120 54 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 55 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 56 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ trace.c: In function 'get_packet': trace.c:270:17: warning: '%s' directive output may be truncated writing up to 254 bytes into a region of size between 86 and 95 [-Wformat-truncation=] 270 | set_err_msg2("get packet failed: r=%d, %s", r, lte.problem); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~ ../include/plt.h:123:46: note: in definition of macro 'set_err_msg2' 123 | snprintf(plt_err_msg, sizeof(plt_err_msg), fmt, v1, v2) | ^~~ trace.c:270:43: note: format string is defined here 270 | set_err_msg2("get packet failed: r=%d, %s", r, lte.problem); | ^~ In function 'snprintf', inlined from 'get_packet' at trace.c:270:4: /usr/include/arm-linux-gnueabihf/bits/stdio2.h:54:10: note: '__builtin___snprintf_chk' output between 26 and 289 bytes into a destination of size 120 54 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 55 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 56 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ make[1]: Leaving directory '/build/reproducible-path/python-libtrace-1.6+git20180219' dh_auto_test create-stamp debian/debhelper-build-stamp fakeroot debian/rules binary dh binary --with python3 dh_testroot dh_prep debian/rules override_dh_auto_install make[1]: Entering directory '/build/reproducible-path/python-libtrace-1.6+git20180219' set -e && for pyvers in 3.12 3.11; do \ ( cd lib/ipp ; python$pyvers ipp-setup.py install --install-layout=deb \ --root /build/reproducible-path/python-libtrace-1.6+git20180219/debian/python3-libtrace ) ; \ ( cd lib/plt ; python$pyvers plt-setup.py install --install-layout=deb \ --root /build/reproducible-path/python-libtrace-1.6+git20180219/debian/python3-libtrace ) ; \ ( cd lib/natkit ; python$pyvers natkit-setup.py install --install-layout=deb \ --root /build/reproducible-path/python-libtrace-1.6+git20180219/debian/python3-libtrace ) ; \ ( cd lib/pldns ; python$pyvers pldns-setup.py install --install-layout=deb \ --root /build/reproducible-path/python-libtrace-1.6+git20180219/debian/python3-libtrace ) ; \ done /usr/lib/python3/dist-packages/setuptools/_distutils/cmd.py:66: SetuptoolsDeprecationWarning: setup.py install is deprecated. !! ******************************************************************************** Please avoid running ``setup.py`` directly. Instead, use pypa/build, pypa/installer or other standards-based tools. See https://blog.ganssle.io/articles/2021/10/setup-py-deprecated.html for details. ******************************************************************************** !! self.initialize_options() /usr/lib/python3/dist-packages/setuptools/_distutils/cmd.py:66: SetuptoolsDeprecationWarning: setup.py install is deprecated. !! ******************************************************************************** Please avoid running ``setup.py`` directly. Instead, use pypa/build, pypa/installer or other standards-based tools. See https://blog.ganssle.io/articles/2021/10/setup-py-deprecated.html for details. ******************************************************************************** !! self.initialize_options() /usr/lib/python3/dist-packages/setuptools/_distutils/cmd.py:66: SetuptoolsDeprecationWarning: setup.py install is deprecated. !! ******************************************************************************** Please avoid running ``setup.py`` directly. Instead, use pypa/build, pypa/installer or other standards-based tools. See https://blog.ganssle.io/articles/2021/10/setup-py-deprecated.html for details. ******************************************************************************** !! self.initialize_options() /usr/lib/python3/dist-packages/setuptools/_distutils/cmd.py:66: SetuptoolsDeprecationWarning: setup.py install is deprecated. !! ******************************************************************************** Please avoid running ``setup.py`` directly. Instead, use pypa/build, pypa/installer or other standards-based tools. See https://blog.ganssle.io/articles/2021/10/setup-py-deprecated.html for details. ******************************************************************************** !! self.initialize_options() /usr/lib/python3/dist-packages/setuptools/_distutils/cmd.py:66: SetuptoolsDeprecationWarning: setup.py install is deprecated. !! ******************************************************************************** Please avoid running ``setup.py`` directly. Instead, use pypa/build, pypa/installer or other standards-based tools. See https://blog.ganssle.io/articles/2021/10/setup-py-deprecated.html for details. ******************************************************************************** !! self.initialize_options() /usr/lib/python3/dist-packages/setuptools/_distutils/cmd.py:66: SetuptoolsDeprecationWarning: setup.py install is deprecated. !! ******************************************************************************** Please avoid running ``setup.py`` directly. Instead, use pypa/build, pypa/installer or other standards-based tools. See https://blog.ganssle.io/articles/2021/10/setup-py-deprecated.html for details. ******************************************************************************** !! self.initialize_options() /usr/lib/python3/dist-packages/setuptools/_distutils/cmd.py:66: SetuptoolsDeprecationWarning: setup.py install is deprecated. !! ******************************************************************************** Please avoid running ``setup.py`` directly. Instead, use pypa/build, pypa/installer or other standards-based tools. See https://blog.ganssle.io/articles/2021/10/setup-py-deprecated.html for details. ******************************************************************************** !! self.initialize_options() /usr/lib/python3/dist-packages/setuptools/_distutils/cmd.py:66: SetuptoolsDeprecationWarning: setup.py install is deprecated. !! ******************************************************************************** Please avoid running ``setup.py`` directly. Instead, use pypa/build, pypa/installer or other standards-based tools. See https://blog.ganssle.io/articles/2021/10/setup-py-deprecated.html for details. ******************************************************************************** !! self.initialize_options() make[1]: Leaving directory '/build/reproducible-path/python-libtrace-1.6+git20180219' dh_installdocs dh_installchangelogs dh_python3 dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_strip dh_makeshlibs dh_shlibdeps dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'python3-libtrace' in '../python3-libtrace_1.6+git20180219-1.1_armhf.deb'. dpkg-deb: building package 'python3-libtrace-dbgsym' in '../python3-libtrace-dbgsym_1.6+git20180219-1.1_armhf.deb'. dpkg-genbuildinfo --build=binary -O../python-libtrace_1.6+git20180219-1.1_armhf.buildinfo dpkg-genchanges --build=binary -O../python-libtrace_1.6+git20180219-1.1_armhf.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/25852 and its subdirectories I: Current time: Thu Jun 6 18:33:16 -12 2024 I: pbuilder-time-stamp: 1717741996 Fri Jun 7 06:33:25 UTC 2024 I: 1st build successful. Starting 2nd build on remote node cbxi4b-armhf-rb.debian.net. Fri Jun 7 06:33:25 UTC 2024 I: Preparing to do remote build '2' on cbxi4b-armhf-rb.debian.net. Fri Jun 7 06:39:19 UTC 2024 I: Deleting $TMPDIR on cbxi4b-armhf-rb.debian.net. Fri Jun 7 06:39:21 UTC 2024 I: python-libtrace_1.6+git20180219-1.1_armhf.changes: Format: 1.8 Date: Fri, 18 Nov 2022 12:08:57 +0200 Source: python-libtrace Binary: python3-libtrace python3-libtrace-dbgsym Architecture: armhf Version: 1.6+git20180219-1.1 Distribution: unstable Urgency: medium Maintainer: Internet Measurement Packaging Team Changed-By: Stefano Rivera Description: python3-libtrace - Python 3 bindings for the libtrace API Closes: 1023901 Changes: python-libtrace (1.6+git20180219-1.1) unstable; urgency=medium . * Non-maintainer upload. * Patch: Python 3.11 support. (Closes: #1023901) Checksums-Sha1: 23972f110918dfc30c2b7cdea41142409cc2225d 6505 python-libtrace_1.6+git20180219-1.1_armhf.buildinfo 8b4ef8518bc098edf63dc1d60cbe9c85be9802aa 357400 python3-libtrace-dbgsym_1.6+git20180219-1.1_armhf.deb de7bf45927c179b45511c2f84447f2fe0750ec24 109732 python3-libtrace_1.6+git20180219-1.1_armhf.deb Checksums-Sha256: 4feccb62127ef74d680e6b8829aed391b74781b9833731ed7c26b512e7c2280c 6505 python-libtrace_1.6+git20180219-1.1_armhf.buildinfo d04388f20ea4b1a242e0cac6bb6fd86261c985a22157bc96a8ef918e2baa1faf 357400 python3-libtrace-dbgsym_1.6+git20180219-1.1_armhf.deb b28d41e9826e5136a81aca1490fb642121ca540f08d883edecf5f93127ac9b75 109732 python3-libtrace_1.6+git20180219-1.1_armhf.deb Files: 1f1ddd2e3d7537ebba3e76792989744a 6505 python optional python-libtrace_1.6+git20180219-1.1_armhf.buildinfo d696693ce7dcfbc2763b1148e35eed5b 357400 debug optional python3-libtrace-dbgsym_1.6+git20180219-1.1_armhf.deb 104c36dab471f10c390df0a1d7c16a22 109732 python optional python3-libtrace_1.6+git20180219-1.1_armhf.deb Fri Jun 7 06:39:22 UTC 2024 I: diffoscope 270 will be used to compare the two builds: Running as unit: rb-diffoscope-armhf_26-5521.service # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.tNrDo16b/python-libtrace_1.6+git20180219-1.1.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.tNrDo16b/python-libtrace_1.6+git20180219-1.1.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.tNrDo16b/python-libtrace_1.6+git20180219-1.1.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.tNrDo16b/b1/python-libtrace_1.6+git20180219-1.1_armhf.changes /srv/reproducible-results/rbuild-debian/r-b-build.tNrDo16b/b2/python-libtrace_1.6+git20180219-1.1_armhf.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.363s) 0.363s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.021s) 0.021s 12 calls diffoscope.comparators.binary.FilesystemFile ## specialize (total time: 0.000s) 0.000s 1 call specialize Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 690ms CPU time consumed: 689ms Fri Jun 7 06:39:23 UTC 2024 I: diffoscope 270 found no differences in the changes files, and a .buildinfo file also exists. Fri Jun 7 06:39:23 UTC 2024 I: python-libtrace from trixie built successfully and reproducibly on armhf. Fri Jun 7 06:39:25 UTC 2024 I: Submitting .buildinfo files to external archives: Fri Jun 7 06:39:25 UTC 2024 I: Submitting 8.0K b1/python-libtrace_1.6+git20180219-1.1_armhf.buildinfo.asc Fri Jun 7 06:39:25 UTC 2024 I: Submitting 8.0K b2/python-libtrace_1.6+git20180219-1.1_armhf.buildinfo.asc Fri Jun 7 06:39:26 UTC 2024 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Fri Jun 7 06:39:26 UTC 2024 I: Done submitting .buildinfo files. Fri Jun 7 06:39:26 UTC 2024 I: Removing signed python-libtrace_1.6+git20180219-1.1_armhf.buildinfo.asc files: removed './b1/python-libtrace_1.6+git20180219-1.1_armhf.buildinfo.asc' removed './b2/python-libtrace_1.6+git20180219-1.1_armhf.buildinfo.asc'