Wed May 8 10:01:32 UTC 2024 I: starting to build pixz/trixie/armhf on jenkins on '2024-05-08 10:01' Wed May 8 10:01:32 UTC 2024 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/armhf_2/6576/console.log Wed May 8 10:01:33 UTC 2024 I: Downloading source for trixie/pixz=1.0.7-2 --2024-05-08 10:01:33-- http://deb.debian.org/debian/pool/main/p/pixz/pixz_1.0.7-2.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 1849 (1.8K) [text/prs.lines.tag] Saving to: ‘pixz_1.0.7-2.dsc’ 0K . 100% 184M=0s 2024-05-08 10:01:33 (184 MB/s) - ‘pixz_1.0.7-2.dsc’ saved [1849/1849] Wed May 8 10:01:33 UTC 2024 I: pixz_1.0.7-2.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: pixz Binary: pixz Architecture: any Version: 1.0.7-2 Maintainer: Leon Marz Homepage: https://github.com/vasi/pixz Standards-Version: 4.6.1 Vcs-Browser: https://salsa.debian.org/debian/pixz Vcs-Git: https://salsa.debian.org/debian/pixz.git Build-Depends: asciidoc, cppcheck, debhelper-compat (= 13), docbook-xml, docbook-xsl, libarchive-dev, liblzma-dev, pkg-config Package-List: pixz deb utils optional arch=any Checksums-Sha1: a58573dc922c6e9d1158f80ac89e822b79024c0f 27998 pixz_1.0.7.orig.tar.gz ed29ed0c15628b9cc66b47e367ce7856ab28ed7d 4008 pixz_1.0.7-2.debian.tar.xz Checksums-Sha256: e29fba74ae399e5d27c21a6009002705ebcc20947b283ed0aa721df6a409680a 27998 pixz_1.0.7.orig.tar.gz 649300b5afe62366eee5ccef03f0d4cb9eaeeb2f592aa6bb3b8b3d249ce556e4 4008 pixz_1.0.7-2.debian.tar.xz Files: 06fcda5892dfad818fe45e8e63427134 27998 pixz_1.0.7.orig.tar.gz 13b0ab15f93ca0c6c9df486d6d90f3e1 4008 pixz_1.0.7-2.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQIzBAEBCgAdFiEEkjZVexcMh/iCHArDweDZLphvfH4FAmKQ1zYACgkQweDZLphv fH7y8Q//T3rTqSn6KNy2FblUxoQi3bYqoZDbCkbrBy5MlLZcLzgNjAKOUV0bUlHs hS/LhbB5ZRlWFlAn1ZklcWTB4GRZ7UtR4Sd8n+nHvuyzfJkNFWFlnekWOb90PTjW rIv+6Ql67NjO8gC7imklGO6SeHvkBlNSMscIkCPnbj/AI5lJ77HfPQ5tT4enVon9 hJA0IjqrucDCgHZhncgGTLYoHj4fmUiWUPi/tATiFqH3RERusF5NQotjDBlPBiHu lmds7xhtk61jhU48k3VzBlks+lPfsvD/ZE3KtefiNEilefTAwkLU4prI3fGYDoi0 fGpwBkmk6x0R9RfRRJqgrEpJo+MWaQJKu7ZHgG57tvl/wtByEbQw8oy5WWZhWwXu 7kc6cAU3p7GtwV2QquDVK9L2rEaWwuyZp/HIl/tT7VS+QLajFEoDlM03h/7o96Ca p6zLSa6wwsKCNJ8tAa15sOwza0DA3xtrhTa1K4zmuXh68MD7TH+XI1y5yWVco7yT pGxqRlWdpfZGfcCXDIoXtgXM/YXedDoKW7blCfdCvWPQYtoCg43lExUEqcpHc5sC 565XDJgBVu3enBQuEoHkT+xdsBHWe1R3nDYKnwpWfNYRDX5/Ft6Wem3jJs/8WkhY dR4zdKxH5IVK+bbfN4x+JtP90V5btcWlFUx7xvEeQ8YH9f5ozWI= =blNb -----END PGP SIGNATURE----- Wed May 8 10:01:33 UTC 2024 I: Checking whether the package is not for us Wed May 8 10:01:33 UTC 2024 I: Starting 1st build on remote node virt32a-armhf-rb.debian.net. Wed May 8 10:01:33 UTC 2024 I: Preparing to do remote build '1' on virt32a-armhf-rb.debian.net. Wed May 8 10:03:39 UTC 2024 I: Deleting $TMPDIR on virt32a-armhf-rb.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Tue May 7 22:01:40 -12 2024 I: pbuilder-time-stamp: 1715162500 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [pixz_1.0.7-2.dsc] I: copying [./pixz_1.0.7.orig.tar.gz] I: copying [./pixz_1.0.7-2.debian.tar.xz] I: Extracting source gpgv: Signature made Fri May 27 13:50:46 2022 gpgv: using RSA key 9236557B170C87F8821C0AC3C1E0D92E986F7C7E gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./pixz_1.0.7-2.dsc: no acceptable signature found dpkg-source: info: extracting pixz in pixz-1.0.7 dpkg-source: info: unpacking pixz_1.0.7.orig.tar.gz dpkg-source: info: unpacking pixz_1.0.7-2.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying fix-cppcheck-warnings.patch I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/18799/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='armhf' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=3 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='armhf' IFS=' ' INVOCATION_ID='1e5d26fba6b9469594406ecfa8f65b76' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='18799' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.yjk0ofTK/pbuilderrc_WblU --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.yjk0ofTK/b1 --logfile b1/build.log pixz_1.0.7-2.dsc' SUDO_GID='113' SUDO_UID='107' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://10.0.0.15:3142/' I: uname -a Linux virt32a 6.1.0-21-armmp-lpae #1 SMP Debian 6.1.90-1 (2024-05-03) armv7l GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 May 7 11:24 /bin -> usr/bin I: user script /srv/workspace/pbuilder/18799/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: armhf Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: asciidoc, cppcheck, debhelper-compat (= 13), docbook-xml, docbook-xsl, libarchive-dev, liblzma-dev, pkg-config dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19444 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on asciidoc; however: Package asciidoc is not installed. pbuilder-satisfydepends-dummy depends on cppcheck; however: Package cppcheck is not installed. pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on docbook-xml; however: Package docbook-xml is not installed. pbuilder-satisfydepends-dummy depends on docbook-xsl; however: Package docbook-xsl is not installed. pbuilder-satisfydepends-dummy depends on libarchive-dev; however: Package libarchive-dev is not installed. pbuilder-satisfydepends-dummy depends on liblzma-dev; however: Package liblzma-dev is not installed. pbuilder-satisfydepends-dummy depends on pkg-config; however: Package pkg-config is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: asciidoc{a} asciidoc-base{a} asciidoc-common{a} autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} comerr-dev{a} cppcheck{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} docbook-xml{a} docbook-xsl{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} icu-devtools{a} intltool-debian{a} libacl1-dev{a} libarchive-dev{a} libarchive-zip-perl{a} libarchive13t64{a} libattr1-dev{a} libbz2-dev{a} libcom-err2{a} libdebhelper-perl{a} libelf1t64{a} libexpat1{a} libext2fs-dev{a} libext2fs2t64{a} libfile-stripnondeterminism-perl{a} libgmp-dev{a} libgmpxx4ldbl{a} libicu-dev{a} libicu72{a} liblz4-dev{a} liblzma-dev{a} libmagic-mgc{a} libmagic1t64{a} libpipeline1{a} libpkgconf3{a} libpython3-stdlib{a} libpython3.11-minimal{a} libpython3.11-stdlib{a} libreadline8t64{a} libsub-override-perl{a} libtinyxml2-10{a} libtool{a} libuchardet0{a} libxml2{a} libxml2-dev{a} libxml2-utils{a} libxslt1.1{a} libzstd-dev{a} m4{a} man-db{a} media-types{a} netbase{a} nettle-dev{a} pkg-config{a} pkgconf{a} pkgconf-bin{a} po-debconf{a} python3{a} python3-minimal{a} python3-pkg-resources{a} python3-pygments{a} python3.11{a} python3.11-minimal{a} readline-common{a} sensible-utils{a} sgml-base{a} sgml-data{a} tzdata{a} xml-core{a} xsltproc{a} zlib1g-dev{a} The following packages are RECOMMENDED but will NOT be installed: asciidoc-dblatex bzip2-doc ca-certificates curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget xmlto 0 packages upgraded, 81 newly installed, 0 to remove and 0 not upgraded. Need to get 45.3 MB of archives. After unpacking 184 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main armhf libpython3.11-minimal armhf 3.11.9-1 [805 kB] Get: 2 http://deb.debian.org/debian trixie/main armhf libexpat1 armhf 2.6.2-1 [83.5 kB] Get: 3 http://deb.debian.org/debian trixie/main armhf python3.11-minimal armhf 3.11.9-1 [1600 kB] Get: 4 http://deb.debian.org/debian trixie/main armhf python3-minimal armhf 3.11.8-1 [26.3 kB] Get: 5 http://deb.debian.org/debian trixie/main armhf media-types all 10.1.0 [26.9 kB] Get: 6 http://deb.debian.org/debian trixie/main armhf netbase all 6.4 [12.8 kB] Get: 7 http://deb.debian.org/debian trixie/main armhf tzdata all 2024a-3 [255 kB] Get: 8 http://deb.debian.org/debian trixie/main armhf readline-common all 8.2-4 [69.3 kB] Get: 9 http://deb.debian.org/debian trixie/main armhf libreadline8t64 armhf 8.2-4 [145 kB] Get: 10 http://deb.debian.org/debian trixie/main armhf libpython3.11-stdlib armhf 3.11.9-1 [1704 kB] Get: 11 http://deb.debian.org/debian trixie/main armhf python3.11 armhf 3.11.9-1 [602 kB] Get: 12 http://deb.debian.org/debian trixie/main armhf libpython3-stdlib armhf 3.11.8-1 [9332 B] Get: 13 http://deb.debian.org/debian trixie/main armhf python3 armhf 3.11.8-1 [27.4 kB] Get: 14 http://deb.debian.org/debian trixie/main armhf sgml-base all 1.31 [15.4 kB] Get: 15 http://deb.debian.org/debian trixie/main armhf sensible-utils all 0.0.22 [22.4 kB] Get: 16 http://deb.debian.org/debian trixie/main armhf libmagic-mgc armhf 1:5.45-3 [314 kB] Get: 17 http://deb.debian.org/debian trixie/main armhf libmagic1t64 armhf 1:5.45-3 [98.1 kB] Get: 18 http://deb.debian.org/debian trixie/main armhf file armhf 1:5.45-3 [42.0 kB] Get: 19 http://deb.debian.org/debian trixie/main armhf gettext-base armhf 0.21-14+b1 [157 kB] Get: 20 http://deb.debian.org/debian trixie/main armhf libuchardet0 armhf 0.0.8-1+b1 [65.7 kB] Get: 21 http://deb.debian.org/debian trixie/main armhf groff-base armhf 1.23.0-4 [1090 kB] Get: 22 http://deb.debian.org/debian trixie/main armhf bsdextrautils armhf 2.40-8 [85.6 kB] Get: 23 http://deb.debian.org/debian trixie/main armhf libpipeline1 armhf 1.5.7-2 [33.3 kB] Get: 24 http://deb.debian.org/debian trixie/main armhf man-db armhf 2.12.1-1 [1375 kB] Get: 25 http://deb.debian.org/debian trixie/main armhf asciidoc-common all 10.2.0-2 [104 kB] Get: 26 http://deb.debian.org/debian trixie/main armhf xml-core all 0.19 [20.1 kB] Get: 27 http://deb.debian.org/debian trixie/main armhf docbook-xsl all 1.79.2+dfsg-7 [1221 kB] Get: 28 http://deb.debian.org/debian trixie/main armhf libicu72 armhf 72.1-4+b1 [9070 kB] Get: 29 http://deb.debian.org/debian trixie/main armhf libxml2 armhf 2.9.14+dfsg-1.3+b3 [598 kB] Get: 30 http://deb.debian.org/debian trixie/main armhf libxml2-utils armhf 2.9.14+dfsg-1.3+b3 [98.1 kB] Get: 31 http://deb.debian.org/debian trixie/main armhf libxslt1.1 armhf 1.1.35-1+b1 [212 kB] Get: 32 http://deb.debian.org/debian trixie/main armhf xsltproc armhf 1.1.35-1+b1 [115 kB] Get: 33 http://deb.debian.org/debian trixie/main armhf asciidoc-base all 10.2.0-2 [85.3 kB] Get: 34 http://deb.debian.org/debian trixie/main armhf asciidoc all 10.2.0-2 [6112 B] Get: 35 http://deb.debian.org/debian trixie/main armhf m4 armhf 1.4.19-4 [264 kB] Get: 36 http://deb.debian.org/debian trixie/main armhf autoconf all 2.71-3 [332 kB] Get: 37 http://deb.debian.org/debian trixie/main armhf autotools-dev all 20220109.1 [51.6 kB] Get: 38 http://deb.debian.org/debian trixie/main armhf automake all 1:1.16.5-1.3 [823 kB] Get: 39 http://deb.debian.org/debian trixie/main armhf autopoint all 0.21-14 [496 kB] Get: 40 http://deb.debian.org/debian trixie/main armhf libcom-err2 armhf 1.47.1~rc2-1 [21.8 kB] Get: 41 http://deb.debian.org/debian trixie/main armhf comerr-dev armhf 2.1-1.47.1~rc2-1 [53.8 kB] Get: 42 http://deb.debian.org/debian trixie/main armhf libtinyxml2-10 armhf 10.0.0+dfsg-2+b1 [25.5 kB] Get: 43 http://deb.debian.org/debian trixie/main armhf python3-pkg-resources all 68.1.2-2 [241 kB] Get: 44 http://deb.debian.org/debian trixie/main armhf python3-pygments all 2.17.2+dfsg-1 [818 kB] Get: 45 http://deb.debian.org/debian trixie/main armhf cppcheck armhf 2.14.0-1 [1951 kB] Get: 46 http://deb.debian.org/debian trixie/main armhf libdebhelper-perl all 13.15.3 [88.0 kB] Get: 47 http://deb.debian.org/debian trixie/main armhf libtool all 2.4.7-7 [517 kB] Get: 48 http://deb.debian.org/debian trixie/main armhf dh-autoreconf all 20 [17.1 kB] Get: 49 http://deb.debian.org/debian trixie/main armhf libarchive-zip-perl all 1.68-1 [104 kB] Get: 50 http://deb.debian.org/debian trixie/main armhf libsub-override-perl all 0.10-1 [10.6 kB] Get: 51 http://deb.debian.org/debian trixie/main armhf libfile-stripnondeterminism-perl all 1.13.1-1 [19.4 kB] Get: 52 http://deb.debian.org/debian trixie/main armhf dh-strip-nondeterminism all 1.13.1-1 [8620 B] Get: 53 http://deb.debian.org/debian trixie/main armhf libelf1t64 armhf 0.191-1+b1 [183 kB] Get: 54 http://deb.debian.org/debian trixie/main armhf dwz armhf 0.15-1+b2 [106 kB] Get: 55 http://deb.debian.org/debian trixie/main armhf gettext armhf 0.21-14+b1 [1230 kB] Get: 56 http://deb.debian.org/debian trixie/main armhf intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 57 http://deb.debian.org/debian trixie/main armhf po-debconf all 1.0.21+nmu1 [248 kB] Get: 58 http://deb.debian.org/debian trixie/main armhf debhelper all 13.15.3 [901 kB] Get: 59 http://deb.debian.org/debian trixie/main armhf sgml-data all 2.0.11+nmu1 [179 kB] Get: 60 http://deb.debian.org/debian trixie/main armhf docbook-xml all 4.5-12 [85.2 kB] Get: 61 http://deb.debian.org/debian trixie/main armhf icu-devtools armhf 72.1-4+b1 [185 kB] Get: 62 http://deb.debian.org/debian trixie/main armhf libattr1-dev armhf 1:2.5.2-1 [35.4 kB] Get: 63 http://deb.debian.org/debian trixie/main armhf libacl1-dev armhf 2.3.2-2 [90.6 kB] Get: 64 http://deb.debian.org/debian trixie/main armhf libarchive13t64 armhf 3.7.2-2 [304 kB] Get: 65 http://deb.debian.org/debian trixie/main armhf libbz2-dev armhf 1.0.8-5.1 [28.3 kB] Get: 66 http://deb.debian.org/debian trixie/main armhf liblz4-dev armhf 1.9.4-2 [75.0 kB] Get: 67 http://deb.debian.org/debian trixie/main armhf liblzma-dev armhf 5.6.1+really5.4.5-1 [281 kB] Get: 68 http://deb.debian.org/debian trixie/main armhf libicu-dev armhf 72.1-4+b1 [10.1 MB] Get: 69 http://deb.debian.org/debian trixie/main armhf libxml2-dev armhf 2.9.14+dfsg-1.3+b3 [717 kB] Get: 70 http://deb.debian.org/debian trixie/main armhf libzstd-dev armhf 1.5.5+dfsg2-2 [322 kB] Get: 71 http://deb.debian.org/debian trixie/main armhf zlib1g-dev armhf 1:1.3.dfsg-3.1 [904 kB] Get: 72 http://deb.debian.org/debian trixie/main armhf libext2fs2t64 armhf 1.47.1~rc2-1 [191 kB] Get: 73 http://deb.debian.org/debian trixie/main armhf libext2fs-dev armhf 1.47.1~rc2-1 [279 kB] Get: 74 http://deb.debian.org/debian trixie/main armhf libgmpxx4ldbl armhf 2:6.3.0+dfsg-2+b1 [328 kB] Get: 75 http://deb.debian.org/debian trixie/main armhf libgmp-dev armhf 2:6.3.0+dfsg-2+b1 [591 kB] Get: 76 http://deb.debian.org/debian trixie/main armhf nettle-dev armhf 3.9.1-2.2 [1289 kB] Get: 77 http://deb.debian.org/debian trixie/main armhf libarchive-dev armhf 3.7.2-2 [525 kB] Get: 78 http://deb.debian.org/debian trixie/main armhf libpkgconf3 armhf 1.8.1-1+b2 [31.9 kB] Get: 79 http://deb.debian.org/debian trixie/main armhf pkgconf-bin armhf 1.8.1-1+b2 [28.9 kB] Get: 80 http://deb.debian.org/debian trixie/main armhf pkgconf armhf 1.8.1-1+b2 [26.2 kB] Get: 81 http://deb.debian.org/debian trixie/main armhf pkg-config armhf 1.8.1-1+b2 [14.0 kB] Fetched 45.3 MB in 2s (25.9 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package libpython3.11-minimal:armhf. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19444 files and directories currently installed.) Preparing to unpack .../libpython3.11-minimal_3.11.9-1_armhf.deb ... Unpacking libpython3.11-minimal:armhf (3.11.9-1) ... Selecting previously unselected package libexpat1:armhf. Preparing to unpack .../libexpat1_2.6.2-1_armhf.deb ... Unpacking libexpat1:armhf (2.6.2-1) ... Selecting previously unselected package python3.11-minimal. Preparing to unpack .../python3.11-minimal_3.11.9-1_armhf.deb ... Unpacking python3.11-minimal (3.11.9-1) ... Setting up libpython3.11-minimal:armhf (3.11.9-1) ... Setting up libexpat1:armhf (2.6.2-1) ... Setting up python3.11-minimal (3.11.9-1) ... Selecting previously unselected package python3-minimal. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19760 files and directories currently installed.) Preparing to unpack .../0-python3-minimal_3.11.8-1_armhf.deb ... Unpacking python3-minimal (3.11.8-1) ... Selecting previously unselected package media-types. Preparing to unpack .../1-media-types_10.1.0_all.deb ... Unpacking media-types (10.1.0) ... Selecting previously unselected package netbase. Preparing to unpack .../2-netbase_6.4_all.deb ... Unpacking netbase (6.4) ... Selecting previously unselected package tzdata. Preparing to unpack .../3-tzdata_2024a-3_all.deb ... Unpacking tzdata (2024a-3) ... Selecting previously unselected package readline-common. Preparing to unpack .../4-readline-common_8.2-4_all.deb ... Unpacking readline-common (8.2-4) ... Selecting previously unselected package libreadline8t64:armhf. Preparing to unpack .../5-libreadline8t64_8.2-4_armhf.deb ... Adding 'diversion of /lib/arm-linux-gnueabihf/libhistory.so.8 to /lib/arm-linux-gnueabihf/libhistory.so.8.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/arm-linux-gnueabihf/libhistory.so.8.2 to /lib/arm-linux-gnueabihf/libhistory.so.8.2.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/arm-linux-gnueabihf/libreadline.so.8 to /lib/arm-linux-gnueabihf/libreadline.so.8.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/arm-linux-gnueabihf/libreadline.so.8.2 to /lib/arm-linux-gnueabihf/libreadline.so.8.2.usr-is-merged by libreadline8t64' Unpacking libreadline8t64:armhf (8.2-4) ... Selecting previously unselected package libpython3.11-stdlib:armhf. Preparing to unpack .../6-libpython3.11-stdlib_3.11.9-1_armhf.deb ... Unpacking libpython3.11-stdlib:armhf (3.11.9-1) ... Selecting previously unselected package python3.11. Preparing to unpack .../7-python3.11_3.11.9-1_armhf.deb ... Unpacking python3.11 (3.11.9-1) ... Selecting previously unselected package libpython3-stdlib:armhf. Preparing to unpack .../8-libpython3-stdlib_3.11.8-1_armhf.deb ... Unpacking libpython3-stdlib:armhf (3.11.8-1) ... Setting up python3-minimal (3.11.8-1) ... Selecting previously unselected package python3. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20752 files and directories currently installed.) Preparing to unpack .../00-python3_3.11.8-1_armhf.deb ... Unpacking python3 (3.11.8-1) ... Selecting previously unselected package sgml-base. Preparing to unpack .../01-sgml-base_1.31_all.deb ... Unpacking sgml-base (1.31) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../02-sensible-utils_0.0.22_all.deb ... Unpacking sensible-utils (0.0.22) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../03-libmagic-mgc_1%3a5.45-3_armhf.deb ... Unpacking libmagic-mgc (1:5.45-3) ... Selecting previously unselected package libmagic1t64:armhf. Preparing to unpack .../04-libmagic1t64_1%3a5.45-3_armhf.deb ... Unpacking libmagic1t64:armhf (1:5.45-3) ... Selecting previously unselected package file. Preparing to unpack .../05-file_1%3a5.45-3_armhf.deb ... Unpacking file (1:5.45-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../06-gettext-base_0.21-14+b1_armhf.deb ... Unpacking gettext-base (0.21-14+b1) ... Selecting previously unselected package libuchardet0:armhf. Preparing to unpack .../07-libuchardet0_0.0.8-1+b1_armhf.deb ... Unpacking libuchardet0:armhf (0.0.8-1+b1) ... Selecting previously unselected package groff-base. Preparing to unpack .../08-groff-base_1.23.0-4_armhf.deb ... Unpacking groff-base (1.23.0-4) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../09-bsdextrautils_2.40-8_armhf.deb ... Unpacking bsdextrautils (2.40-8) ... Selecting previously unselected package libpipeline1:armhf. Preparing to unpack .../10-libpipeline1_1.5.7-2_armhf.deb ... Unpacking libpipeline1:armhf (1.5.7-2) ... Selecting previously unselected package man-db. Preparing to unpack .../11-man-db_2.12.1-1_armhf.deb ... Unpacking man-db (2.12.1-1) ... Selecting previously unselected package asciidoc-common. Preparing to unpack .../12-asciidoc-common_10.2.0-2_all.deb ... Unpacking asciidoc-common (10.2.0-2) ... Selecting previously unselected package xml-core. Preparing to unpack .../13-xml-core_0.19_all.deb ... Unpacking xml-core (0.19) ... Selecting previously unselected package docbook-xsl. Preparing to unpack .../14-docbook-xsl_1.79.2+dfsg-7_all.deb ... Unpacking docbook-xsl (1.79.2+dfsg-7) ... Selecting previously unselected package libicu72:armhf. Preparing to unpack .../15-libicu72_72.1-4+b1_armhf.deb ... Unpacking libicu72:armhf (72.1-4+b1) ... Selecting previously unselected package libxml2:armhf. Preparing to unpack .../16-libxml2_2.9.14+dfsg-1.3+b3_armhf.deb ... Unpacking libxml2:armhf (2.9.14+dfsg-1.3+b3) ... Selecting previously unselected package libxml2-utils. Preparing to unpack .../17-libxml2-utils_2.9.14+dfsg-1.3+b3_armhf.deb ... Unpacking libxml2-utils (2.9.14+dfsg-1.3+b3) ... Selecting previously unselected package libxslt1.1:armhf. Preparing to unpack .../18-libxslt1.1_1.1.35-1+b1_armhf.deb ... Unpacking libxslt1.1:armhf (1.1.35-1+b1) ... Selecting previously unselected package xsltproc. Preparing to unpack .../19-xsltproc_1.1.35-1+b1_armhf.deb ... Unpacking xsltproc (1.1.35-1+b1) ... Selecting previously unselected package asciidoc-base. Preparing to unpack .../20-asciidoc-base_10.2.0-2_all.deb ... Unpacking asciidoc-base (10.2.0-2) ... Selecting previously unselected package asciidoc. Preparing to unpack .../21-asciidoc_10.2.0-2_all.deb ... Unpacking asciidoc (10.2.0-2) ... Selecting previously unselected package m4. Preparing to unpack .../22-m4_1.4.19-4_armhf.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../23-autoconf_2.71-3_all.deb ... Unpacking autoconf (2.71-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../24-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../25-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../26-autopoint_0.21-14_all.deb ... Unpacking autopoint (0.21-14) ... Selecting previously unselected package libcom-err2:armhf. Preparing to unpack .../27-libcom-err2_1.47.1~rc2-1_armhf.deb ... Unpacking libcom-err2:armhf (1.47.1~rc2-1) ... Selecting previously unselected package comerr-dev:armhf. Preparing to unpack .../28-comerr-dev_2.1-1.47.1~rc2-1_armhf.deb ... Unpacking comerr-dev:armhf (2.1-1.47.1~rc2-1) ... Selecting previously unselected package libtinyxml2-10:armhf. Preparing to unpack .../29-libtinyxml2-10_10.0.0+dfsg-2+b1_armhf.deb ... Unpacking libtinyxml2-10:armhf (10.0.0+dfsg-2+b1) ... Selecting previously unselected package python3-pkg-resources. Preparing to unpack .../30-python3-pkg-resources_68.1.2-2_all.deb ... Unpacking python3-pkg-resources (68.1.2-2) ... Selecting previously unselected package python3-pygments. Preparing to unpack .../31-python3-pygments_2.17.2+dfsg-1_all.deb ... Unpacking python3-pygments (2.17.2+dfsg-1) ... Selecting previously unselected package cppcheck. Preparing to unpack .../32-cppcheck_2.14.0-1_armhf.deb ... Unpacking cppcheck (2.14.0-1) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../33-libdebhelper-perl_13.15.3_all.deb ... Unpacking libdebhelper-perl (13.15.3) ... Selecting previously unselected package libtool. Preparing to unpack .../34-libtool_2.4.7-7_all.deb ... Unpacking libtool (2.4.7-7) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../35-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../36-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libsub-override-perl. Preparing to unpack .../37-libsub-override-perl_0.10-1_all.deb ... Unpacking libsub-override-perl (0.10-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../38-libfile-stripnondeterminism-perl_1.13.1-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.13.1-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../39-dh-strip-nondeterminism_1.13.1-1_all.deb ... Unpacking dh-strip-nondeterminism (1.13.1-1) ... Selecting previously unselected package libelf1t64:armhf. Preparing to unpack .../40-libelf1t64_0.191-1+b1_armhf.deb ... Unpacking libelf1t64:armhf (0.191-1+b1) ... Selecting previously unselected package dwz. Preparing to unpack .../41-dwz_0.15-1+b2_armhf.deb ... Unpacking dwz (0.15-1+b2) ... Selecting previously unselected package gettext. Preparing to unpack .../42-gettext_0.21-14+b1_armhf.deb ... Unpacking gettext (0.21-14+b1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../43-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../44-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../45-debhelper_13.15.3_all.deb ... Unpacking debhelper (13.15.3) ... Selecting previously unselected package sgml-data. Preparing to unpack .../46-sgml-data_2.0.11+nmu1_all.deb ... Unpacking sgml-data (2.0.11+nmu1) ... Selecting previously unselected package docbook-xml. Preparing to unpack .../47-docbook-xml_4.5-12_all.deb ... Unpacking docbook-xml (4.5-12) ... Selecting previously unselected package icu-devtools. Preparing to unpack .../48-icu-devtools_72.1-4+b1_armhf.deb ... Unpacking icu-devtools (72.1-4+b1) ... Selecting previously unselected package libattr1-dev:armhf. Preparing to unpack .../49-libattr1-dev_1%3a2.5.2-1_armhf.deb ... Unpacking libattr1-dev:armhf (1:2.5.2-1) ... Selecting previously unselected package libacl1-dev:armhf. Preparing to unpack .../50-libacl1-dev_2.3.2-2_armhf.deb ... Unpacking libacl1-dev:armhf (2.3.2-2) ... Selecting previously unselected package libarchive13t64:armhf. Preparing to unpack .../51-libarchive13t64_3.7.2-2_armhf.deb ... Unpacking libarchive13t64:armhf (3.7.2-2) ... Selecting previously unselected package libbz2-dev:armhf. Preparing to unpack .../52-libbz2-dev_1.0.8-5.1_armhf.deb ... Unpacking libbz2-dev:armhf (1.0.8-5.1) ... Selecting previously unselected package liblz4-dev:armhf. Preparing to unpack .../53-liblz4-dev_1.9.4-2_armhf.deb ... Unpacking liblz4-dev:armhf (1.9.4-2) ... Selecting previously unselected package liblzma-dev:armhf. Preparing to unpack .../54-liblzma-dev_5.6.1+really5.4.5-1_armhf.deb ... Unpacking liblzma-dev:armhf (5.6.1+really5.4.5-1) ... Selecting previously unselected package libicu-dev:armhf. Preparing to unpack .../55-libicu-dev_72.1-4+b1_armhf.deb ... Unpacking libicu-dev:armhf (72.1-4+b1) ... Selecting previously unselected package libxml2-dev:armhf. Preparing to unpack .../56-libxml2-dev_2.9.14+dfsg-1.3+b3_armhf.deb ... Unpacking libxml2-dev:armhf (2.9.14+dfsg-1.3+b3) ... Selecting previously unselected package libzstd-dev:armhf. Preparing to unpack .../57-libzstd-dev_1.5.5+dfsg2-2_armhf.deb ... Unpacking libzstd-dev:armhf (1.5.5+dfsg2-2) ... Selecting previously unselected package zlib1g-dev:armhf. Preparing to unpack .../58-zlib1g-dev_1%3a1.3.dfsg-3.1_armhf.deb ... Unpacking zlib1g-dev:armhf (1:1.3.dfsg-3.1) ... Selecting previously unselected package libext2fs2t64:armhf. Preparing to unpack .../59-libext2fs2t64_1.47.1~rc2-1_armhf.deb ... Adding 'diversion of /lib/arm-linux-gnueabihf/libe2p.so.2 to /lib/arm-linux-gnueabihf/libe2p.so.2.usr-is-merged by libext2fs2t64' Adding 'diversion of /lib/arm-linux-gnueabihf/libe2p.so.2.3 to /lib/arm-linux-gnueabihf/libe2p.so.2.3.usr-is-merged by libext2fs2t64' Adding 'diversion of /lib/arm-linux-gnueabihf/libext2fs.so.2 to /lib/arm-linux-gnueabihf/libext2fs.so.2.usr-is-merged by libext2fs2t64' Adding 'diversion of /lib/arm-linux-gnueabihf/libext2fs.so.2.4 to /lib/arm-linux-gnueabihf/libext2fs.so.2.4.usr-is-merged by libext2fs2t64' Unpacking libext2fs2t64:armhf (1.47.1~rc2-1) ... Selecting previously unselected package libext2fs-dev. Preparing to unpack .../60-libext2fs-dev_1.47.1~rc2-1_armhf.deb ... Unpacking libext2fs-dev (1.47.1~rc2-1) ... Selecting previously unselected package libgmpxx4ldbl:armhf. Preparing to unpack .../61-libgmpxx4ldbl_2%3a6.3.0+dfsg-2+b1_armhf.deb ... Unpacking libgmpxx4ldbl:armhf (2:6.3.0+dfsg-2+b1) ... Selecting previously unselected package libgmp-dev:armhf. Preparing to unpack .../62-libgmp-dev_2%3a6.3.0+dfsg-2+b1_armhf.deb ... Unpacking libgmp-dev:armhf (2:6.3.0+dfsg-2+b1) ... Selecting previously unselected package nettle-dev:armhf. Preparing to unpack .../63-nettle-dev_3.9.1-2.2_armhf.deb ... Unpacking nettle-dev:armhf (3.9.1-2.2) ... Selecting previously unselected package libarchive-dev:armhf. Preparing to unpack .../64-libarchive-dev_3.7.2-2_armhf.deb ... Unpacking libarchive-dev:armhf (3.7.2-2) ... Selecting previously unselected package libpkgconf3:armhf. Preparing to unpack .../65-libpkgconf3_1.8.1-1+b2_armhf.deb ... Unpacking libpkgconf3:armhf (1.8.1-1+b2) ... Selecting previously unselected package pkgconf-bin. Preparing to unpack .../66-pkgconf-bin_1.8.1-1+b2_armhf.deb ... Unpacking pkgconf-bin (1.8.1-1+b2) ... Selecting previously unselected package pkgconf:armhf. Preparing to unpack .../67-pkgconf_1.8.1-1+b2_armhf.deb ... Unpacking pkgconf:armhf (1.8.1-1+b2) ... Selecting previously unselected package pkg-config:armhf. Preparing to unpack .../68-pkg-config_1.8.1-1+b2_armhf.deb ... Unpacking pkg-config:armhf (1.8.1-1+b2) ... Setting up media-types (10.1.0) ... Setting up libpipeline1:armhf (1.5.7-2) ... Setting up libicu72:armhf (72.1-4+b1) ... Setting up libzstd-dev:armhf (1.5.5+dfsg2-2) ... Setting up bsdextrautils (2.40-8) ... Setting up libattr1-dev:armhf (1:2.5.2-1) ... Setting up libmagic-mgc (1:5.45-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.15.3) ... Setting up libmagic1t64:armhf (1:5.45-3) ... Setting up libtinyxml2-10:armhf (10.0.0+dfsg-2+b1) ... Setting up gettext-base (0.21-14+b1) ... Setting up m4 (1.4.19-4) ... Setting up libcom-err2:armhf (1.47.1~rc2-1) ... Setting up file (1:5.45-3) ... Setting up libelf1t64:armhf (0.191-1+b1) ... Setting up tzdata (2024a-3) ... Current default time zone: 'Etc/UTC' Local time is now: Wed May 8 10:02:41 UTC 2024. Universal Time is now: Wed May 8 10:02:41 UTC 2024. Run 'dpkg-reconfigure tzdata' if you wish to change it. Setting up autotools-dev (20220109.1) ... Setting up libpkgconf3:armhf (1.8.1-1+b2) ... Setting up libgmpxx4ldbl:armhf (2:6.3.0+dfsg-2+b1) ... Setting up comerr-dev:armhf (2.1-1.47.1~rc2-1) ... Setting up autopoint (0.21-14) ... Setting up icu-devtools (72.1-4+b1) ... Setting up liblz4-dev:armhf (1.9.4-2) ... Setting up pkgconf-bin (1.8.1-1+b2) ... Setting up autoconf (2.71-3) ... Setting up liblzma-dev:armhf (5.6.1+really5.4.5-1) ... Setting up zlib1g-dev:armhf (1:1.3.dfsg-3.1) ... Setting up dwz (0.15-1+b2) ... Setting up sensible-utils (0.0.22) ... Setting up libuchardet0:armhf (0.0.8-1+b1) ... Setting up libext2fs2t64:armhf (1.47.1~rc2-1) ... Setting up libsub-override-perl (0.10-1) ... Setting up netbase (6.4) ... Setting up sgml-base (1.31) ... Setting up libext2fs-dev (1.47.1~rc2-1) ... Setting up readline-common (8.2-4) ... Setting up libicu-dev:armhf (72.1-4+b1) ... Setting up libxml2:armhf (2.9.14+dfsg-1.3+b3) ... Setting up libacl1-dev:armhf (2.3.2-2) ... Setting up libbz2-dev:armhf (1.0.8-5.1) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.13.1-1) ... Setting up gettext (0.21-14+b1) ... Setting up libgmp-dev:armhf (2:6.3.0+dfsg-2+b1) ... Setting up nettle-dev:armhf (3.9.1-2.2) ... Setting up libtool (2.4.7-7) ... Setting up pkgconf:armhf (1.8.1-1+b2) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up libxml2-dev:armhf (2.9.14+dfsg-1.3+b3) ... Setting up pkg-config:armhf (1.8.1-1+b2) ... Setting up libreadline8t64:armhf (8.2-4) ... Setting up dh-strip-nondeterminism (1.13.1-1) ... Setting up groff-base (1.23.0-4) ... Setting up xml-core (0.19) ... Setting up libxslt1.1:armhf (1.1.35-1+b1) ... Setting up libxml2-utils (2.9.14+dfsg-1.3+b3) ... Setting up libarchive13t64:armhf (3.7.2-2) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up libpython3.11-stdlib:armhf (3.11.9-1) ... Setting up xsltproc (1.1.35-1+b1) ... Setting up man-db (2.12.1-1) ... Not building database; man-db/auto-update is not 'true'. Setting up libarchive-dev:armhf (3.7.2-2) ... Setting up libpython3-stdlib:armhf (3.11.8-1) ... Setting up python3.11 (3.11.9-1) ... Setting up debhelper (13.15.3) ... Setting up python3 (3.11.8-1) ... Setting up asciidoc-common (10.2.0-2) ... Setting up python3-pkg-resources (68.1.2-2) ... Setting up python3-pygments (2.17.2+dfsg-1) ... Setting up cppcheck (2.14.0-1) ... Processing triggers for libc-bin (2.38-7) ... Processing triggers for sgml-base (1.31) ... Setting up docbook-xsl (1.79.2+dfsg-7) ... Setting up sgml-data (2.0.11+nmu1) ... Setting up asciidoc-base (10.2.0-2) ... Setting up asciidoc (10.2.0-2) ... Processing triggers for sgml-base (1.31) ... Setting up docbook-xml (4.5-12) ... Processing triggers for sgml-base (1.31) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/reproducible-path/pixz-1.0.7/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../pixz_1.0.7-2_source.changes dpkg-buildpackage: info: source package pixz dpkg-buildpackage: info: source version 1.0.7-2 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Leon Marz dpkg-source --before-build . dpkg-buildpackage: info: host architecture armhf debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf configure.ac:14: warning: The macro `AC_PROG_CC_STDC' is obsolete. configure.ac:14: You should run autoupdate. ./lib/autoconf/c.m4:1666: AC_PROG_CC_STDC is expanded from... configure.ac:14: the top level configure.ac:14: installing './compile' configure.ac:47: installing './config.guess' configure.ac:47: installing './config.sub' configure.ac:11: installing './install-sh' configure.ac:11: installing './missing' src/Makefile.am: installing './depcomp' parallel-tests: installing './test-driver' dh_auto_configure ./configure --build=arm-linux-gnueabihf --prefix=/usr --includedir=\${prefix}/include --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info --sysconfdir=/etc --localstatedir=/var --disable-option-checking --disable-silent-rules --libdir=\${prefix}/lib/arm-linux-gnueabihf --runstatedir=/run --disable-maintainer-mode --disable-dependency-tracking checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a race-free mkdir -p... /usr/bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports the include directive... yes (GNU style) checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether gcc accepts -g... yes checking for gcc option to enable C11 features... none needed checking whether gcc understands -c and -o together... yes checking dependency style of gcc... none checking for src/pixz.1... no checking for a2x... a2x checking for ceil in -lm... yes checking build system type... arm-unknown-linux-gnueabihf checking host system type... arm-unknown-linux-gnueabihf checking if compiler needs -Werror to reject unknown flags... no checking for the pthreads library -lpthreads... no checking whether pthreads work without any flags... yes checking for joinable pthread attribute... PTHREAD_CREATE_JOINABLE checking if more special flags are required for pthreads... no checking for PTHREAD_PRIO_INHERIT... yes checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for libarchive... yes checking for liblzma... yes checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for fcntl.h... yes checking for stdint.h... (cached) yes checking for stdlib.h... (cached) yes checking for string.h... (cached) yes checking for unistd.h... (cached) yes checking for off_t... yes checking for size_t... yes checking for ssize_t... yes checking for uint16_t... yes checking for uint32_t... yes checking for uint64_t... yes checking for uint8_t... yes checking for special C compiler options needed for large files... no checking for _FILE_OFFSET_BITS value needed for large files... no checking for GNU libc compatible malloc... yes checking for GNU libc compatible realloc... yes checking for working strtod... yes checking for memchr... yes checking for memmove... yes checking for memset... yes checking for strerror... yes checking for strtol... yes checking for gcc options needed to detect all undeclared functions... none needed checking for sys/endian.h... no checking for endian.h... yes checking whether htole64 is declared... yes checking whether le64toh is declared... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating src/Makefile config.status: creating test/Makefile config.status: creating config.h config.status: executing depfiles commands dh_auto_build make -j3 make[1]: Entering directory '/build/reproducible-path/pixz-1.0.7' make all-recursive make[2]: Entering directory '/build/reproducible-path/pixz-1.0.7' Making all in src make[3]: Entering directory '/build/reproducible-path/pixz-1.0.7/src' gcc -DHAVE_CONFIG_H -I. -I.. -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Wno-unknown-pragmas -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/pixz-1.0.7=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -c -o pixz-common.o `test -f 'common.c' || echo './'`common.c gcc -DHAVE_CONFIG_H -I. -I.. -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Wno-unknown-pragmas -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/pixz-1.0.7=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -c -o pixz-cpu.o `test -f 'cpu.c' || echo './'`cpu.c gcc -DHAVE_CONFIG_H -I. -I.. -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Wno-unknown-pragmas -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/pixz-1.0.7=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -c -o pixz-endian.o `test -f 'endian.c' || echo './'`endian.c gcc -DHAVE_CONFIG_H -I. -I.. -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Wno-unknown-pragmas -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/pixz-1.0.7=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -c -o pixz-list.o `test -f 'list.c' || echo './'`list.c gcc -DHAVE_CONFIG_H -I. -I.. -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Wno-unknown-pragmas -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/pixz-1.0.7=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -c -o pixz-pixz.o `test -f 'pixz.c' || echo './'`pixz.c gcc -DHAVE_CONFIG_H -I. -I.. -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Wno-unknown-pragmas -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/pixz-1.0.7=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -c -o pixz-read.o `test -f 'read.c' || echo './'`read.c gcc -DHAVE_CONFIG_H -I. -I.. -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Wno-unknown-pragmas -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/pixz-1.0.7=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -c -o pixz-write.o `test -f 'write.c' || echo './'`write.c a2x -a manversion=1.0.7 -f manpage ../src/pixz.1.asciidoc gcc -Wall -Wno-unknown-pragmas -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/pixz-1.0.7=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -o pixz pixz-common.o pixz-cpu.o pixz-endian.o pixz-list.o pixz-pixz.o pixz-read.o pixz-write.o -lm -larchive -llzma -lm if ! test -f pixz.1 ; then mv -f ../src/pixz.1 . ; fi make[3]: Leaving directory '/build/reproducible-path/pixz-1.0.7/src' Making all in test make[3]: Entering directory '/build/reproducible-path/pixz-1.0.7/test' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/build/reproducible-path/pixz-1.0.7/test' make[3]: Entering directory '/build/reproducible-path/pixz-1.0.7' make[3]: Leaving directory '/build/reproducible-path/pixz-1.0.7' make[2]: Leaving directory '/build/reproducible-path/pixz-1.0.7' make[1]: Leaving directory '/build/reproducible-path/pixz-1.0.7' dh_auto_test make -j3 check "TESTSUITEFLAGS=-j3 --verbose" VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/pixz-1.0.7' Making check in src make[2]: Entering directory '/build/reproducible-path/pixz-1.0.7/src' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/build/reproducible-path/pixz-1.0.7/src' Making check in test make[2]: Entering directory '/build/reproducible-path/pixz-1.0.7/test' make check-TESTS make[3]: Entering directory '/build/reproducible-path/pixz-1.0.7/test' make[4]: Entering directory '/build/reproducible-path/pixz-1.0.7/test' PASS: single-file-round-trip.sh PASS: xz-compatibility-c-option.sh PASS: compress-file-permissions.sh FAIL: cppcheck-src.sh ===================================== pixz 1.0.7: test/test-suite.log ===================================== # TOTAL: 4 # PASS: 3 # SKIP: 0 # XFAIL: 0 # FAIL: 1 # XPASS: 0 # ERROR: 0 .. contents:: :depth: 2 FAIL: cppcheck-src ================== /usr/bin/cppcheck Checking ../src/common.c ... ../src/common.c:0:0: information: Limiting analysis of branches. Use --check-level=exhaustive to analyze all branches. [normalCheckLevelMaxBranches] ^ Checking ../src/common.c: HAVE_CONFIG_H... 1/7 files checked 26% done Checking ../src/cpu.c ... 2/7 files checked 26% done Checking ../src/endian.c ... Checking ../src/endian.c: HAVE_DECL_HTOLE64=0;__FreeBSD__;__linux__... Checking ../src/endian.c: HAVE_DECL_LE64TOH=0;__FreeBSD__;__linux__... Checking ../src/endian.c: __APPLE__... Checking ../src/endian.c: __FreeBSD__;__linux__... Checking ../src/endian.c: __FreeBSD__;__linux__;__linux__... 3/7 files checked 28% done Checking ../src/list.c ... Checking ../src/list.c: HAVE_CONFIG_H... 4/7 files checked 29% done Checking ../src/pixz.c ... ../src/pixz.c:0:0: information: Limiting analysis of branches. Use --check-level=exhaustive to analyze all branches. [normalCheckLevelMaxBranches] ^ Checking ../src/pixz.c: HAVE_CONFIG_H... 5/7 files checked 40% done Checking ../src/read.c ... ../src/read.c:0:0: information: Limiting analysis of branches. Use --check-level=exhaustive to analyze all branches. [normalCheckLevelMaxBranches] ^ Checking ../src/read.c: DEBUG... Checking ../src/read.c: HAVE_CONFIG_H... 6/7 files checked 73% done Checking ../src/write.c ... Checking ../src/write.c: HAVE_CONFIG_H... 7/7 files checked 100% done FAIL cppcheck-src.sh (exit status: 1) ============================================================================ Testsuite summary for pixz 1.0.7 ============================================================================ # TOTAL: 4 # PASS: 3 # SKIP: 0 # XFAIL: 0 # FAIL: 1 # XPASS: 0 # ERROR: 0 ============================================================================ See test/test-suite.log Please report to https://github.com/vasi/pixz/issues ============================================================================ make[4]: *** [Makefile:498: test-suite.log] Error 1 make[4]: Leaving directory '/build/reproducible-path/pixz-1.0.7/test' make[3]: *** [Makefile:606: check-TESTS] Error 2 make[3]: Leaving directory '/build/reproducible-path/pixz-1.0.7/test' make[2]: *** [Makefile:671: check-am] Error 2 make[2]: Leaving directory '/build/reproducible-path/pixz-1.0.7/test' make[1]: *** [Makefile:377: check-recursive] Error 1 make[1]: Leaving directory '/build/reproducible-path/pixz-1.0.7' dh_auto_test: error: make -j3 check "TESTSUITEFLAGS=-j3 --verbose" VERBOSE=1 returned exit code 2 make: *** [debian/rules:10: binary] Error 25 dpkg-buildpackage: error: debian/rules binary subprocess returned exit status 2 I: copying local configuration E: Failed autobuilding of package I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/18799 and its subdirectories Wed May 8 10:03:42 UTC 2024 W: No second build log, what happened?