Thu Jul 18 10:10:55 UTC 2024 I: starting to build libdata-flow-perl/trixie/armhf on jenkins on '2024-07-18 10:10' Thu Jul 18 10:10:55 UTC 2024 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/armhf_10/4835/console.log Thu Jul 18 10:10:55 UTC 2024 I: Downloading source for trixie/libdata-flow-perl=1.02-4 --2024-07-18 10:10:55-- http://deb.debian.org/debian/pool/main/libd/libdata-flow-perl/libdata-flow-perl_1.02-4.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2054 (2.0K) [text/prs.lines.tag] Saving to: ‘libdata-flow-perl_1.02-4.dsc’ 0K .. 100% 259M=0s 2024-07-18 10:10:55 (259 MB/s) - ‘libdata-flow-perl_1.02-4.dsc’ saved [2054/2054] Thu Jul 18 10:10:55 UTC 2024 I: libdata-flow-perl_1.02-4.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: libdata-flow-perl Binary: libdata-flow-perl Architecture: all Version: 1.02-4 Maintainer: Debian Perl Group Uploaders: Niko Tyni Homepage: https://metacpan.org/release/Data-Flow Standards-Version: 4.1.3 Vcs-Browser: https://salsa.debian.org/perl-team/modules/packages/libdata-flow-perl Vcs-Git: https://salsa.debian.org/perl-team/modules/packages/libdata-flow-perl.git Testsuite: autopkgtest-pkg-perl Build-Depends: debhelper-compat (= 13) Package-List: libdata-flow-perl deb perl optional arch=all Checksums-Sha1: f0b13e1c75b0d962fc84d93e81e0c6a86e95dafb 5188 libdata-flow-perl_1.02.orig.tar.gz 81bc02f18bb16ba5bb4f96b533c04650ab7b6b11 2688 libdata-flow-perl_1.02-4.debian.tar.xz Checksums-Sha256: 1335aba637595035f13d841bdcf740eee9b0c8bf5f538e6cedfb8792cc8fe56c 5188 libdata-flow-perl_1.02.orig.tar.gz 7bb9dc74e795c6f0a7f26dc2a285c571614748501dc9834256c9782a26105411 2688 libdata-flow-perl_1.02-4.debian.tar.xz Files: aa453ab013681206bccf43e8e267d63b 5188 libdata-flow-perl_1.02.orig.tar.gz c09a09f1923666ac2e79cce2a815e7b7 2688 libdata-flow-perl_1.02-4.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQIzBAEBCgAdFiEEsjhixBXWVlpOhsvXV5wWDUyeI+gFAmNIaesACgkQV5wWDUye I+gR7hAAqBQHJxWSynp2ir0EGaxPYIBffOgt5F3DgAO72hxg8PwUdOeJlc3RyDbN ug6rmvX5RFbX+BgfRGre5Vz1TWf/MVnfcT17UGCC1tyWfeaNdhjcsG2+wYp4eAro 1jjnfAAW6Iw46hf6y7+zUcrNixN6iu5ai5DL13Ld92/CClhVQwBEhvEgENW6fNAZ sTeoc3JsvvtlNVbGjaR5xsF8LzjSR1lCoy3dP5yBzlHLiqGszZc6otZ5prAb5nyd NhmrEf6s65m7/3HQnGCGLdaNfYdAWgbi2Lpe0r70OJMLCKpHzHnHXqFbvorn7wvU NTC2QOcj2I/nUnCB80+QpJYXbWLM4VuUkPr8idiPgXwMbR3zzlgt7NG1D+rQEOEL b8Uaco0SFqIbgmEi52sSfxxv0dgb7I0/OIp8w3Q5kuZncGCzrcR/o/uPePUgVCCr alBm1nftMdYljtoNoHxA5uwtEjt+mFHijY+eBWzvlSTrbO/Hpsb6nEnJs1XGCszt 8yDDxo4kxAjnlKPVXcHekX7Pk7Feno4OVSa61X+Mu5R6ZoED6HOekWrgrZBEia5a fs27sIgaposRDDRX8uFtwarfbTrmcfKQ/bIssIT/YyRaJ4iFMaJKUbvgUIZtpU10 a210+oQFkSXi7+HKXLjJwwA3OTY1gKXkbfzDiBrvKrEEnXIX7wM= =pjTo -----END PGP SIGNATURE----- Thu Jul 18 10:10:55 UTC 2024 I: Checking whether the package is not for us Thu Jul 18 10:10:55 UTC 2024 I: Starting 1st build on remote node wbq0-armhf-rb.debian.net. Thu Jul 18 10:10:55 UTC 2024 I: Preparing to do remote build '1' on wbq0-armhf-rb.debian.net. Thu Jul 18 10:13:13 UTC 2024 I: Deleting $TMPDIR on wbq0-armhf-rb.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Wed Jul 17 22:11:03 -12 2024 I: pbuilder-time-stamp: 1721297463 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libdata-flow-perl_1.02-4.dsc] I: copying [./libdata-flow-perl_1.02.orig.tar.gz] I: copying [./libdata-flow-perl_1.02-4.debian.tar.xz] I: Extracting source gpgv: Signature made Thu Oct 13 19:41:31 2022 gpgv: using RSA key B23862C415D6565A4E86CBD7579C160D4C9E23E8 gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./libdata-flow-perl_1.02-4.dsc: no acceptable signature found dpkg-source: info: extracting libdata-flow-perl in libdata-flow-perl-1.02 dpkg-source: info: unpacking libdata-flow-perl_1.02.orig.tar.gz tar: A lone zero block at 40 dpkg-source: info: unpacking libdata-flow-perl_1.02-4.debian.tar.xz I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/24061/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='armhf' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=3 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='armhf' IFS=' ' INVOCATION_ID='278876b2206d4c79a5473e113c2d8fe1' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='24061' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.h7EbaaFf/pbuilderrc_4su6 --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.h7EbaaFf/b1 --logfile b1/build.log libdata-flow-perl_1.02-4.dsc' SUDO_GID='113' SUDO_UID='107' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://10.0.0.15:3142/' I: uname -a Linux wbq0 6.1.0-23-armmp #1 SMP Debian 6.1.99-1 (2024-07-15) armv7l GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Jun 5 22:35 /bin -> usr/bin I: user script /srv/workspace/pbuilder/24061/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: armhf Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13) dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19407 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libicu72{a} libmagic-mgc{a} libmagic1t64{a} libpipeline1{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 29 newly installed, 0 to remove and 0 not upgraded. Need to get 18.9 MB of archives. After unpacking 70.0 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main armhf sensible-utils all 0.0.24 [24.8 kB] Get: 2 http://deb.debian.org/debian trixie/main armhf libmagic-mgc armhf 1:5.45-3 [314 kB] Get: 3 http://deb.debian.org/debian trixie/main armhf libmagic1t64 armhf 1:5.45-3 [98.1 kB] Get: 4 http://deb.debian.org/debian trixie/main armhf file armhf 1:5.45-3 [42.0 kB] Get: 5 http://deb.debian.org/debian trixie/main armhf gettext-base armhf 0.22.5-1 [195 kB] Get: 6 http://deb.debian.org/debian trixie/main armhf libuchardet0 armhf 0.0.8-1+b1 [65.7 kB] Get: 7 http://deb.debian.org/debian trixie/main armhf groff-base armhf 1.23.0-5 [1091 kB] Get: 8 http://deb.debian.org/debian trixie/main armhf bsdextrautils armhf 2.40.2-1 [87.8 kB] Get: 9 http://deb.debian.org/debian trixie/main armhf libpipeline1 armhf 1.5.7-2 [33.3 kB] Get: 10 http://deb.debian.org/debian trixie/main armhf man-db armhf 2.12.1-2 [1376 kB] Get: 11 http://deb.debian.org/debian trixie/main armhf m4 armhf 1.4.19-4 [264 kB] Get: 12 http://deb.debian.org/debian trixie/main armhf autoconf all 2.71-3 [332 kB] Get: 13 http://deb.debian.org/debian trixie/main armhf autotools-dev all 20220109.1 [51.6 kB] Get: 14 http://deb.debian.org/debian trixie/main armhf automake all 1:1.16.5-1.3 [823 kB] Get: 15 http://deb.debian.org/debian trixie/main armhf autopoint all 0.22.5-1 [723 kB] Get: 16 http://deb.debian.org/debian trixie/main armhf libdebhelper-perl all 13.16 [88.6 kB] Get: 17 http://deb.debian.org/debian trixie/main armhf libtool all 2.4.7-7 [517 kB] Get: 18 http://deb.debian.org/debian trixie/main armhf dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian trixie/main armhf libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian trixie/main armhf libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get: 21 http://deb.debian.org/debian trixie/main armhf dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get: 22 http://deb.debian.org/debian trixie/main armhf libelf1t64 armhf 0.191-2 [183 kB] Get: 23 http://deb.debian.org/debian trixie/main armhf dwz armhf 0.15-1+b2 [106 kB] Get: 24 http://deb.debian.org/debian trixie/main armhf libicu72 armhf 72.1-5 [9075 kB] Get: 25 http://deb.debian.org/debian trixie/main armhf libxml2 armhf 2.9.14+dfsg-1.3+b3 [598 kB] Get: 26 http://deb.debian.org/debian trixie/main armhf gettext armhf 0.22.5-1 [1479 kB] Get: 27 http://deb.debian.org/debian trixie/main armhf intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian trixie/main armhf po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian trixie/main armhf debhelper all 13.16 [891 kB] Fetched 18.9 MB in 2s (10.6 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19407 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3_armhf.deb ... Unpacking libmagic-mgc (1:5.45-3) ... Selecting previously unselected package libmagic1t64:armhf. Preparing to unpack .../02-libmagic1t64_1%3a5.45-3_armhf.deb ... Unpacking libmagic1t64:armhf (1:5.45-3) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-3_armhf.deb ... Unpacking file (1:5.45-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.22.5-1_armhf.deb ... Unpacking gettext-base (0.22.5-1) ... Selecting previously unselected package libuchardet0:armhf. Preparing to unpack .../05-libuchardet0_0.0.8-1+b1_armhf.deb ... Unpacking libuchardet0:armhf (0.0.8-1+b1) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-5_armhf.deb ... Unpacking groff-base (1.23.0-5) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.40.2-1_armhf.deb ... Unpacking bsdextrautils (2.40.2-1) ... Selecting previously unselected package libpipeline1:armhf. Preparing to unpack .../08-libpipeline1_1.5.7-2_armhf.deb ... Unpacking libpipeline1:armhf (1.5.7-2) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.12.1-2_armhf.deb ... Unpacking man-db (2.12.1-2) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-4_armhf.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.71-3_all.deb ... Unpacking autoconf (2.71-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.22.5-1_all.deb ... Unpacking autopoint (0.22.5-1) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.16_all.deb ... Unpacking libdebhelper-perl (13.16) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.4.7-7_all.deb ... Unpacking libtool (2.4.7-7) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:armhf. Preparing to unpack .../21-libelf1t64_0.191-2_armhf.deb ... Unpacking libelf1t64:armhf (0.191-2) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b2_armhf.deb ... Unpacking dwz (0.15-1+b2) ... Selecting previously unselected package libicu72:armhf. Preparing to unpack .../23-libicu72_72.1-5_armhf.deb ... Unpacking libicu72:armhf (72.1-5) ... Selecting previously unselected package libxml2:armhf. Preparing to unpack .../24-libxml2_2.9.14+dfsg-1.3+b3_armhf.deb ... Unpacking libxml2:armhf (2.9.14+dfsg-1.3+b3) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.22.5-1_armhf.deb ... Unpacking gettext (0.22.5-1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.16_all.deb ... Unpacking debhelper (13.16) ... Setting up libpipeline1:armhf (1.5.7-2) ... Setting up libicu72:armhf (72.1-5) ... Setting up bsdextrautils (2.40.2-1) ... Setting up libmagic-mgc (1:5.45-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.16) ... Setting up libmagic1t64:armhf (1:5.45-3) ... Setting up gettext-base (0.22.5-1) ... Setting up m4 (1.4.19-4) ... Setting up file (1:5.45-3) ... Setting up libelf1t64:armhf (0.191-2) ... Setting up autotools-dev (20220109.1) ... Setting up autopoint (0.22.5-1) ... Setting up autoconf (2.71-3) ... Setting up dwz (0.15-1+b2) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:armhf (0.0.8-1+b1) ... Setting up libxml2:armhf (2.9.14+dfsg-1.3+b3) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up gettext (0.22.5-1) ... Setting up libtool (2.4.7-7) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up groff-base (1.23.0-5) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.12.1-2) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.16) ... Processing triggers for libc-bin (2.38-14) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.33-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/reproducible-path/libdata-flow-perl-1.02/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libdata-flow-perl_1.02-4_source.changes dpkg-buildpackage: info: source package libdata-flow-perl dpkg-buildpackage: info: source version 1.02-4 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Jelmer Vernooij dpkg-source --before-build . dpkg-buildpackage: info: host architecture armhf fakeroot debian/rules clean dh clean dh_clean debian/rules build dh build dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libdata-flow-perl-1.02=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2" "LD=arm-linux-gnueabihf-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libdata-flow-perl-1.02=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -Wl,-z,relro" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Data::Flow Writing MYMETA.yml and MYMETA.json dh_auto_build make -j3 make[1]: Entering directory '/build/reproducible-path/libdata-flow-perl-1.02' cp Flow.pm blib/lib/Data/Flow.pm AutoSplitting blib/lib/Data/Flow.pm (blib/lib/auto/Data/Flow) Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libdata-flow-perl-1.02' dh_auto_test make -j3 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libdata-flow-perl-1.02' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/Data-Flow.t .. 1..12 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok All tests successful. Files=1, Tests=12, 0 wallclock secs ( 0.13 usr 0.04 sys + 0.05 cusr 0.04 csys = 0.26 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libdata-flow-perl-1.02' create-stamp debian/debhelper-build-stamp fakeroot debian/rules binary dh binary dh_testroot dh_prep dh_auto_install --destdir=debian/libdata-flow-perl/ make -j3 install DESTDIR=/build/reproducible-path/libdata-flow-perl-1.02/debian/libdata-flow-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libdata-flow-perl-1.02' Manifying 1 pod document Installing /build/reproducible-path/libdata-flow-perl-1.02/debian/libdata-flow-perl/usr/share/perl5/Data/Flow.pm Installing /build/reproducible-path/libdata-flow-perl-1.02/debian/libdata-flow-perl/usr/share/perl5/auto/Data/Flow/autosplit.ix Installing /build/reproducible-path/libdata-flow-perl-1.02/debian/libdata-flow-perl/usr/share/man/man3/Data::Flow.3pm make[1]: Leaving directory '/build/reproducible-path/libdata-flow-perl-1.02' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libdata-flow-perl' in '../libdata-flow-perl_1.02-4_all.deb'. dpkg-genbuildinfo --build=binary -O../libdata-flow-perl_1.02-4_armhf.buildinfo dpkg-genchanges --build=binary -O../libdata-flow-perl_1.02-4_armhf.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/24061 and its subdirectories I: Current time: Wed Jul 17 22:13:08 -12 2024 I: pbuilder-time-stamp: 1721297588 Thu Jul 18 10:13:16 UTC 2024 I: 1st build successful. Starting 2nd build on remote node virt64a-armhf-rb.debian.net. Thu Jul 18 10:13:16 UTC 2024 I: Preparing to do remote build '2' on virt64a-armhf-rb.debian.net. Thu Jul 18 10:15:14 UTC 2024 I: Deleting $TMPDIR on virt64a-armhf-rb.debian.net. Thu Jul 18 10:15:16 UTC 2024 I: libdata-flow-perl_1.02-4_armhf.changes: Format: 1.8 Date: Thu, 13 Oct 2022 20:40:57 +0100 Source: libdata-flow-perl Binary: libdata-flow-perl Architecture: all Version: 1.02-4 Distribution: unstable Urgency: medium Maintainer: Debian Perl Group Changed-By: Jelmer Vernooij Description: libdata-flow-perl - Perl extension for simple-minded recipe-controlled build of data Changes: libdata-flow-perl (1.02-4) unstable; urgency=medium . [ Debian Janitor ] * Bump debhelper from old 12 to 13. * Apply multi-arch hints. + libdata-flow-perl: Add Multi-Arch: foreign. Checksums-Sha1: a6f53350a0e3232d7f2d18b49444d976e0641bf2 9844 libdata-flow-perl_1.02-4_all.deb a30d7777d027558d4d36035cb3728c8b32afcc35 4600 libdata-flow-perl_1.02-4_armhf.buildinfo Checksums-Sha256: ac0d507e4ae604f0f63a4c2172ba3b666c824b927dbafff71d1b61538545d5ba 9844 libdata-flow-perl_1.02-4_all.deb a401e9e7792e9c5c8c35f67f02f6ea1542eb99c0cb59230931471336400c243d 4600 libdata-flow-perl_1.02-4_armhf.buildinfo Files: bda13dfbfc9338adee480330699cfdec 9844 perl optional libdata-flow-perl_1.02-4_all.deb 58cfd4d2ada38b374fe738b9f51af37e 4600 perl optional libdata-flow-perl_1.02-4_armhf.buildinfo Thu Jul 18 10:15:17 UTC 2024 I: diffoscope 272 will be used to compare the two builds: Running as unit: rb-diffoscope-armhf_10-4835.service Warning: program compiled against libxml 212 using older 209 # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.h7EbaaFf/libdata-flow-perl_1.02-4.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.h7EbaaFf/libdata-flow-perl_1.02-4.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.h7EbaaFf/libdata-flow-perl_1.02-4.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.h7EbaaFf/b1/libdata-flow-perl_1.02-4_armhf.changes /srv/reproducible-results/rbuild-debian/r-b-build.h7EbaaFf/b2/libdata-flow-perl_1.02-4_armhf.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.404s) 0.404s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.016s) 0.016s 12 calls diffoscope.comparators.binary.FilesystemFile ## specialize (total time: 0.000s) 0.000s 1 call specialize Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 785ms CPU time consumed: 776ms Thu Jul 18 10:15:19 UTC 2024 I: diffoscope 272 found no differences in the changes files, and a .buildinfo file also exists. Thu Jul 18 10:15:19 UTC 2024 I: libdata-flow-perl from trixie built successfully and reproducibly on armhf. Thu Jul 18 10:15:21 UTC 2024 I: Submitting .buildinfo files to external archives: Thu Jul 18 10:15:21 UTC 2024 I: Submitting 8.0K b1/libdata-flow-perl_1.02-4_armhf.buildinfo.asc Thu Jul 18 10:15:21 UTC 2024 I: Submitting 8.0K b2/libdata-flow-perl_1.02-4_armhf.buildinfo.asc Thu Jul 18 10:15:22 UTC 2024 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Thu Jul 18 10:15:22 UTC 2024 I: Done submitting .buildinfo files. Thu Jul 18 10:15:22 UTC 2024 I: Removing signed libdata-flow-perl_1.02-4_armhf.buildinfo.asc files: removed './b1/libdata-flow-perl_1.02-4_armhf.buildinfo.asc' removed './b2/libdata-flow-perl_1.02-4_armhf.buildinfo.asc'