Sun May 12 08:50:21 UTC 2024 I: starting to build libcrypt-dsa-perl/trixie/armhf on jenkins on '2024-05-12 08:49' Sun May 12 08:50:21 UTC 2024 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/armhf_3/5150/console.log Sun May 12 08:50:21 UTC 2024 I: Downloading source for trixie/libcrypt-dsa-perl=1.17-5 --2024-05-12 08:50:21-- http://deb.debian.org/debian/pool/main/libc/libcrypt-dsa-perl/libcrypt-dsa-perl_1.17-5.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2245 (2.2K) [text/prs.lines.tag] Saving to: ‘libcrypt-dsa-perl_1.17-5.dsc’ 0K .. 100% 241M=0s 2024-05-12 08:50:21 (241 MB/s) - ‘libcrypt-dsa-perl_1.17-5.dsc’ saved [2245/2245] Sun May 12 08:50:21 UTC 2024 I: libcrypt-dsa-perl_1.17-5.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: libcrypt-dsa-perl Binary: libcrypt-dsa-perl Architecture: all Version: 1.17-5 Maintainer: Debian Perl Group Uploaders: Dominic Hargreaves Homepage: https://metacpan.org/release/Crypt-DSA Standards-Version: 3.9.6 Vcs-Browser: https://salsa.debian.org/perl-team/modules/packages/libcrypt-dsa-perl Vcs-Git: https://salsa.debian.org/perl-team/modules/packages/libcrypt-dsa-perl.git Testsuite: autopkgtest-pkg-perl Build-Depends: debhelper-compat (= 13), libmodule-install-perl Build-Depends-Indep: perl, libconvert-asn1-perl, libconvert-pem-perl, libcrypt-des-ede3-perl, libdata-buffer-perl, libfile-which-perl, libmath-bigint-gmp-perl Package-List: libcrypt-dsa-perl deb perl optional arch=all Checksums-Sha1: 32069da8c04d8bea79b260dda6f94b3000b3df24 42930 libcrypt-dsa-perl_1.17.orig.tar.gz 62771bf262a3765a08fb20a06bb87ab84b427f32 3012 libcrypt-dsa-perl_1.17-5.debian.tar.xz Checksums-Sha256: d1b8585f6bf746f76e5dc5da3641d325ed656bc2e5f344b54514b55c31009a03 42930 libcrypt-dsa-perl_1.17.orig.tar.gz f1d726a01c2943ac8f48e384b77645a5b6cd526ce53219f54b623c401b633aab 3012 libcrypt-dsa-perl_1.17-5.debian.tar.xz Files: 0a64dcd77e796ebacad4c6af2df74b57 42930 libcrypt-dsa-perl_1.17.orig.tar.gz 2ace2f72760f544bf0692f967b4c8600 3012 libcrypt-dsa-perl_1.17-5.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQIzBAEBCgAdFiEEsjhixBXWVlpOhsvXV5wWDUyeI+gFAmKmWTgACgkQV5wWDUye I+jDlA//eX7S3rtsU0St0y0iA2FIPWhDstxIa6hFFZZUOpa1NyHuHEyPWCrmhGLP rNgjkNj7SmFzDDLjE568aXO8qTBP0KqBjavvtcn6mXS7JVvAFUtZ3iWDvJ5gO35/ NPxz/GM8niX6hFGZM9/K4EaMIk+9SE32Osjhhha2TtlSr/Dt2UENaNGnyS5+2rTe ajGaNi3b3m10Q1dsdEX5y6W5uHDxs2HJnR8J8yPOc4N/AdlgJj13gLQj71gVAVXg hbcUiixb4s/FVyf4ZRKKGv+U/hLYMljswNolCwSMoxux1v5XQ5+H29aRdnfn88ft BXFsoGK1adWCWRXwgnjU6xsdqCOgrm55higNYm2kzh/GvN3gPoN7WaVqQUSZ8O08 F/4ceeouvIEGA1vyvLu5ZCd3x031XYe04/a1Ky4z7kQN4VlNOE+vWQLnMj7P2yhs JFTLGbBmyjD+H7gY3RDFCQxF0dP3Ql4Yvr4LOBtCgH2qhWlauaog6gihj1Z3fAtX 44JUE3juFaQvql3kMyPTLFdb/Jkwp6UVy+Ny8z2eHLfHrQb1SfUWonraiJ+iwX20 EWY5kjkzbHwa03TzhftAeixl/GoFSlzYvNrfWoShJfIEnoTPm+gpK9pdxOqI59ey AekvEew2R0P9lOSodZQeTBlksRRRVCh+MhSGt61fy8JHv8F9ySs= =l2T7 -----END PGP SIGNATURE----- Sun May 12 08:50:21 UTC 2024 I: Checking whether the package is not for us Sun May 12 08:50:21 UTC 2024 I: Starting 1st build on remote node ff4a-armhf-rb.debian.net. Sun May 12 08:50:21 UTC 2024 I: Preparing to do remote build '1' on ff4a-armhf-rb.debian.net. Sun May 12 08:58:05 UTC 2024 I: Deleting $TMPDIR on ff4a-armhf-rb.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Sat May 11 20:50:29 -12 2024 I: pbuilder-time-stamp: 1715503829 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libcrypt-dsa-perl_1.17-5.dsc] I: copying [./libcrypt-dsa-perl_1.17.orig.tar.gz] I: copying [./libcrypt-dsa-perl_1.17-5.debian.tar.xz] I: Extracting source gpgv: Signature made Sun Jun 12 21:23:04 2022 gpgv: using RSA key B23862C415D6565A4E86CBD7579C160D4C9E23E8 gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./libcrypt-dsa-perl_1.17-5.dsc: no acceptable signature found dpkg-source: info: extracting libcrypt-dsa-perl in libcrypt-dsa-perl-1.17 dpkg-source: info: unpacking libcrypt-dsa-perl_1.17.orig.tar.gz dpkg-source: info: unpacking libcrypt-dsa-perl_1.17-5.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying remove-fallback dpkg-source: info: applying 00_use_digest_sha.diff I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/7079/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='armhf' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=3 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='armhf' IFS=' ' INVOCATION_ID='1a0519dd585140d99a5797aa46b3a34a' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='7079' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.MK2yUBeo/pbuilderrc_i9Uc --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.MK2yUBeo/b1 --logfile b1/build.log libcrypt-dsa-perl_1.17-5.dsc' SUDO_GID='113' SUDO_UID='107' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://10.0.0.15:3142/' I: uname -a Linux ff4a 6.1.0-21-armmp-lpae #1 SMP Debian 6.1.90-1 (2024-05-03) armv7l GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 May 11 11:24 /bin -> usr/bin I: user script /srv/workspace/pbuilder/7079/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: armhf Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), libmodule-install-perl, perl, libconvert-asn1-perl, libconvert-pem-perl, libcrypt-des-ede3-perl, libdata-buffer-perl, libfile-which-perl, libmath-bigint-gmp-perl dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19446 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libmodule-install-perl; however: Package libmodule-install-perl is not installed. pbuilder-satisfydepends-dummy depends on libconvert-asn1-perl; however: Package libconvert-asn1-perl is not installed. pbuilder-satisfydepends-dummy depends on libconvert-pem-perl; however: Package libconvert-pem-perl is not installed. pbuilder-satisfydepends-dummy depends on libcrypt-des-ede3-perl; however: Package libcrypt-des-ede3-perl is not installed. pbuilder-satisfydepends-dummy depends on libdata-buffer-perl; however: Package libdata-buffer-perl is not installed. pbuilder-satisfydepends-dummy depends on libfile-which-perl; however: Package libfile-which-perl is not installed. pbuilder-satisfydepends-dummy depends on libmath-bigint-gmp-perl; however: Package libmath-bigint-gmp-perl is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libclass-errorhandler-perl{a} libconvert-asn1-perl{a} libconvert-pem-perl{a} libcrypt-des-ede3-perl{a} libcrypt-des-perl{a} libdata-buffer-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-remove-perl{a} libfile-stripnondeterminism-perl{a} libfile-which-perl{a} libicu72{a} libmagic-mgc{a} libmagic1t64{a} libmath-bigint-gmp-perl{a} libmath-bigint-perl{a} libmodule-install-perl{a} libmodule-scandeps-perl{a} libpipeline1{a} libsub-override-perl{a} libtool{a} libuchardet0{a} libxml2{a} libyaml-tiny-perl{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libfile-homedir-perl libjson-perl libltdl-dev libmail-sendmail-perl libpar-dist-perl libwww-perl lynx wget 0 packages upgraded, 43 newly installed, 0 to remove and 0 not upgraded. Need to get 18.9 MB of archives. After unpacking 70.7 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main armhf sensible-utils all 0.0.22 [22.4 kB] Get: 2 http://deb.debian.org/debian trixie/main armhf libmagic-mgc armhf 1:5.45-3 [314 kB] Get: 3 http://deb.debian.org/debian trixie/main armhf libmagic1t64 armhf 1:5.45-3 [98.1 kB] Get: 4 http://deb.debian.org/debian trixie/main armhf file armhf 1:5.45-3 [42.0 kB] Get: 5 http://deb.debian.org/debian trixie/main armhf gettext-base armhf 0.21-14+b1 [157 kB] Get: 6 http://deb.debian.org/debian trixie/main armhf libuchardet0 armhf 0.0.8-1+b1 [65.7 kB] Get: 7 http://deb.debian.org/debian trixie/main armhf groff-base armhf 1.23.0-4 [1090 kB] Get: 8 http://deb.debian.org/debian trixie/main armhf bsdextrautils armhf 2.40-8 [85.6 kB] Get: 9 http://deb.debian.org/debian trixie/main armhf libpipeline1 armhf 1.5.7-2 [33.3 kB] Get: 10 http://deb.debian.org/debian trixie/main armhf man-db armhf 2.12.1-1 [1375 kB] Get: 11 http://deb.debian.org/debian trixie/main armhf m4 armhf 1.4.19-4 [264 kB] Get: 12 http://deb.debian.org/debian trixie/main armhf autoconf all 2.71-3 [332 kB] Get: 13 http://deb.debian.org/debian trixie/main armhf autotools-dev all 20220109.1 [51.6 kB] Get: 14 http://deb.debian.org/debian trixie/main armhf automake all 1:1.16.5-1.3 [823 kB] Get: 15 http://deb.debian.org/debian trixie/main armhf autopoint all 0.21-14 [496 kB] Get: 16 http://deb.debian.org/debian trixie/main armhf libdebhelper-perl all 13.15.3 [88.0 kB] Get: 17 http://deb.debian.org/debian trixie/main armhf libtool all 2.4.7-7 [517 kB] Get: 18 http://deb.debian.org/debian trixie/main armhf dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian trixie/main armhf libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian trixie/main armhf libsub-override-perl all 0.10-1 [10.6 kB] Get: 21 http://deb.debian.org/debian trixie/main armhf libfile-stripnondeterminism-perl all 1.13.1-1 [19.4 kB] Get: 22 http://deb.debian.org/debian trixie/main armhf dh-strip-nondeterminism all 1.13.1-1 [8620 B] Get: 23 http://deb.debian.org/debian trixie/main armhf libelf1t64 armhf 0.191-1+b1 [183 kB] Get: 24 http://deb.debian.org/debian trixie/main armhf dwz armhf 0.15-1+b2 [106 kB] Get: 25 http://deb.debian.org/debian trixie/main armhf libicu72 armhf 72.1-4+b1 [9070 kB] Get: 26 http://deb.debian.org/debian trixie/main armhf libxml2 armhf 2.9.14+dfsg-1.3+b3 [598 kB] Get: 27 http://deb.debian.org/debian trixie/main armhf gettext armhf 0.21-14+b1 [1230 kB] Get: 28 http://deb.debian.org/debian trixie/main armhf intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 29 http://deb.debian.org/debian trixie/main armhf po-debconf all 1.0.21+nmu1 [248 kB] Get: 30 http://deb.debian.org/debian trixie/main armhf debhelper all 13.15.3 [901 kB] Get: 31 http://deb.debian.org/debian trixie/main armhf libclass-errorhandler-perl all 0.04-3 [6052 B] Get: 32 http://deb.debian.org/debian trixie/main armhf libmath-bigint-perl all 2.003002-1 [185 kB] Get: 33 http://deb.debian.org/debian trixie/main armhf libconvert-asn1-perl all 0.34-1 [44.5 kB] Get: 34 http://deb.debian.org/debian trixie/main armhf libcrypt-des-perl armhf 2.07-4+b4 [17.1 kB] Get: 35 http://deb.debian.org/debian trixie/main armhf libcrypt-des-ede3-perl all 0.01-3 [6384 B] Get: 36 http://deb.debian.org/debian trixie/main armhf libconvert-pem-perl all 0.08-3 [17.6 kB] Get: 37 http://deb.debian.org/debian trixie/main armhf libdata-buffer-perl all 0.04-3 [11.2 kB] Get: 38 http://deb.debian.org/debian trixie/main armhf libfile-remove-perl all 1.61-2 [16.1 kB] Get: 39 http://deb.debian.org/debian trixie/main armhf libfile-which-perl all 1.27-2 [15.1 kB] Get: 40 http://deb.debian.org/debian trixie/main armhf libmath-bigint-gmp-perl armhf 1.7001-1+b1 [22.5 kB] Get: 41 http://deb.debian.org/debian trixie/main armhf libmodule-scandeps-perl all 1.35-1 [43.7 kB] Get: 42 http://deb.debian.org/debian trixie/main armhf libyaml-tiny-perl all 1.74-1 [30.7 kB] Get: 43 http://deb.debian.org/debian trixie/main armhf libmodule-install-perl all 1.21-2 [139 kB] Fetched 18.9 MB in 2s (11.5 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19446 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.22_all.deb ... Unpacking sensible-utils (0.0.22) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3_armhf.deb ... Unpacking libmagic-mgc (1:5.45-3) ... Selecting previously unselected package libmagic1t64:armhf. Preparing to unpack .../02-libmagic1t64_1%3a5.45-3_armhf.deb ... Unpacking libmagic1t64:armhf (1:5.45-3) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-3_armhf.deb ... Unpacking file (1:5.45-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.21-14+b1_armhf.deb ... Unpacking gettext-base (0.21-14+b1) ... Selecting previously unselected package libuchardet0:armhf. Preparing to unpack .../05-libuchardet0_0.0.8-1+b1_armhf.deb ... Unpacking libuchardet0:armhf (0.0.8-1+b1) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-4_armhf.deb ... Unpacking groff-base (1.23.0-4) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.40-8_armhf.deb ... Unpacking bsdextrautils (2.40-8) ... Selecting previously unselected package libpipeline1:armhf. Preparing to unpack .../08-libpipeline1_1.5.7-2_armhf.deb ... Unpacking libpipeline1:armhf (1.5.7-2) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.12.1-1_armhf.deb ... Unpacking man-db (2.12.1-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-4_armhf.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.71-3_all.deb ... Unpacking autoconf (2.71-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.21-14_all.deb ... Unpacking autopoint (0.21-14) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.15.3_all.deb ... Unpacking libdebhelper-perl (13.15.3) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.4.7-7_all.deb ... Unpacking libtool (2.4.7-7) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libsub-override-perl. Preparing to unpack .../19-libsub-override-perl_0.10-1_all.deb ... Unpacking libsub-override-perl (0.10-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../20-libfile-stripnondeterminism-perl_1.13.1-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.13.1-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../21-dh-strip-nondeterminism_1.13.1-1_all.deb ... Unpacking dh-strip-nondeterminism (1.13.1-1) ... Selecting previously unselected package libelf1t64:armhf. Preparing to unpack .../22-libelf1t64_0.191-1+b1_armhf.deb ... Unpacking libelf1t64:armhf (0.191-1+b1) ... Selecting previously unselected package dwz. Preparing to unpack .../23-dwz_0.15-1+b2_armhf.deb ... Unpacking dwz (0.15-1+b2) ... Selecting previously unselected package libicu72:armhf. Preparing to unpack .../24-libicu72_72.1-4+b1_armhf.deb ... Unpacking libicu72:armhf (72.1-4+b1) ... Selecting previously unselected package libxml2:armhf. Preparing to unpack .../25-libxml2_2.9.14+dfsg-1.3+b3_armhf.deb ... Unpacking libxml2:armhf (2.9.14+dfsg-1.3+b3) ... Selecting previously unselected package gettext. Preparing to unpack .../26-gettext_0.21-14+b1_armhf.deb ... Unpacking gettext (0.21-14+b1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../27-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../28-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../29-debhelper_13.15.3_all.deb ... Unpacking debhelper (13.15.3) ... Selecting previously unselected package libclass-errorhandler-perl. Preparing to unpack .../30-libclass-errorhandler-perl_0.04-3_all.deb ... Unpacking libclass-errorhandler-perl (0.04-3) ... Selecting previously unselected package libmath-bigint-perl. Preparing to unpack .../31-libmath-bigint-perl_2.003002-1_all.deb ... Unpacking libmath-bigint-perl (2.003002-1) ... Selecting previously unselected package libconvert-asn1-perl. Preparing to unpack .../32-libconvert-asn1-perl_0.34-1_all.deb ... Unpacking libconvert-asn1-perl (0.34-1) ... Selecting previously unselected package libcrypt-des-perl:armhf. Preparing to unpack .../33-libcrypt-des-perl_2.07-4+b4_armhf.deb ... Unpacking libcrypt-des-perl:armhf (2.07-4+b4) ... Selecting previously unselected package libcrypt-des-ede3-perl. Preparing to unpack .../34-libcrypt-des-ede3-perl_0.01-3_all.deb ... Unpacking libcrypt-des-ede3-perl (0.01-3) ... Selecting previously unselected package libconvert-pem-perl. Preparing to unpack .../35-libconvert-pem-perl_0.08-3_all.deb ... Unpacking libconvert-pem-perl (0.08-3) ... Selecting previously unselected package libdata-buffer-perl. Preparing to unpack .../36-libdata-buffer-perl_0.04-3_all.deb ... Unpacking libdata-buffer-perl (0.04-3) ... Selecting previously unselected package libfile-remove-perl. Preparing to unpack .../37-libfile-remove-perl_1.61-2_all.deb ... Unpacking libfile-remove-perl (1.61-2) ... Selecting previously unselected package libfile-which-perl. Preparing to unpack .../38-libfile-which-perl_1.27-2_all.deb ... Unpacking libfile-which-perl (1.27-2) ... Selecting previously unselected package libmath-bigint-gmp-perl. Preparing to unpack .../39-libmath-bigint-gmp-perl_1.7001-1+b1_armhf.deb ... Unpacking libmath-bigint-gmp-perl (1.7001-1+b1) ... Selecting previously unselected package libmodule-scandeps-perl. Preparing to unpack .../40-libmodule-scandeps-perl_1.35-1_all.deb ... Unpacking libmodule-scandeps-perl (1.35-1) ... Selecting previously unselected package libyaml-tiny-perl. Preparing to unpack .../41-libyaml-tiny-perl_1.74-1_all.deb ... Unpacking libyaml-tiny-perl (1.74-1) ... Selecting previously unselected package libmodule-install-perl. Preparing to unpack .../42-libmodule-install-perl_1.21-2_all.deb ... Unpacking libmodule-install-perl (1.21-2) ... Setting up libfile-remove-perl (1.61-2) ... Setting up libpipeline1:armhf (1.5.7-2) ... Setting up libfile-which-perl (1.27-2) ... Setting up libicu72:armhf (72.1-4+b1) ... Setting up bsdextrautils (2.40-8) ... Setting up libmagic-mgc (1:5.45-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.15.3) ... Setting up libmath-bigint-perl (2.003002-1) ... Setting up libmagic1t64:armhf (1:5.45-3) ... Setting up gettext-base (0.21-14+b1) ... Setting up m4 (1.4.19-4) ... Setting up file (1:5.45-3) ... Setting up libclass-errorhandler-perl (0.04-3) ... Setting up libyaml-tiny-perl (1.74-1) ... Setting up libelf1t64:armhf (0.191-1+b1) ... Setting up autotools-dev (20220109.1) ... Setting up libcrypt-des-perl:armhf (2.07-4+b4) ... Setting up libmath-bigint-gmp-perl (1.7001-1+b1) ... Setting up autopoint (0.21-14) ... Setting up autoconf (2.71-3) ... Setting up dwz (0.15-1+b2) ... Setting up sensible-utils (0.0.22) ... Setting up libuchardet0:armhf (0.0.8-1+b1) ... Setting up libsub-override-perl (0.10-1) ... Setting up libconvert-asn1-perl (0.34-1) ... Setting up libxml2:armhf (2.9.14+dfsg-1.3+b3) ... Setting up libmodule-scandeps-perl (1.35-1) ... Setting up libdata-buffer-perl (0.04-3) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.13.1-1) ... Setting up libcrypt-des-ede3-perl (0.01-3) ... Setting up gettext (0.21-14+b1) ... Setting up libtool (2.4.7-7) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up libmodule-install-perl (1.21-2) ... Setting up dh-strip-nondeterminism (1.13.1-1) ... Setting up groff-base (1.23.0-4) ... Setting up libconvert-pem-perl (0.08-3) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.12.1-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.15.3) ... Processing triggers for libc-bin (2.38-10) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.33-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/reproducible-path/libcrypt-dsa-perl-1.17/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libcrypt-dsa-perl_1.17-5_source.changes dpkg-buildpackage: info: source package libcrypt-dsa-perl dpkg-buildpackage: info: source version 1.17-5 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Jelmer Vernooij dpkg-source --before-build . dpkg-buildpackage: info: host architecture armhf fakeroot debian/rules clean dh clean dh_clean debian/rules build dh build dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libcrypt-dsa-perl-1.17=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2" "LD=arm-linux-gnueabihf-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libcrypt-dsa-perl-1.17=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -Wl,-z,relro" Warning: prerequisite Digest::SHA1 0 not found. Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Crypt::DSA Writing MYMETA.yml and MYMETA.json dh_auto_build make -j3 make[1]: Entering directory '/build/reproducible-path/libcrypt-dsa-perl-1.17' cp lib/Crypt/DSA/KeyChain.pm blib/lib/Crypt/DSA/KeyChain.pm cp lib/Crypt/DSA/Key.pm blib/lib/Crypt/DSA/Key.pm cp lib/Crypt/DSA/Signature.pm blib/lib/Crypt/DSA/Signature.pm cp lib/Crypt/DSA.pm blib/lib/Crypt/DSA.pm cp lib/Crypt/DSA/Key/SSH2.pm blib/lib/Crypt/DSA/Key/SSH2.pm cp lib/Crypt/DSA/Util.pm blib/lib/Crypt/DSA/Util.pm cp lib/Crypt/DSA/Key/PEM.pm blib/lib/Crypt/DSA/Key/PEM.pm Manifying 7 pod documents make[1]: Leaving directory '/build/reproducible-path/libcrypt-dsa-perl-1.17' dh_auto_test make -j3 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libcrypt-dsa-perl-1.17' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'inc', 'blib/lib', 'blib/arch')" t/*.t # Testing Crypt::DSA 1.17 t/00-compile.t .. 1..1 ok 1 - use Crypt::DSA; ok t/01-util.t ..... 1..13 ok 1 - bin2mp is correct for long string ok 2 - bitsize is correct for large number ok 3 - bitsize is correct for large mp ok 4 - mp2bin is correct for large number ok 5 - bin2mp is correct for short string ok 6 - bitsize is correct for small number ok 7 - bitsize is correct for small mp ok 8 - mp2bin is correct for small number ok 9 - bin2mp is correct for empty string ok 10 - mp2bin is correct for empty string ok 11 - mod_exp is correct ok 12 - mod_inverse is correct ok 13 - mod_inverse reverses correctly ok t/02-sign.t ..... 1..4 ok 1 - Crypt::DSA->new ok ok 2 - Generated key correctly ok 3 - generated signature correctly ok 4 - verified signature correctly ok t/03-keygen.t ... 1..18 ok 1 - Key generated of size 512 bits ok 2 - Key is 512 bits ok 3 - p of appropriate size (512 bits) ok 4 - q of appropriate size (512 bits) ok 5 - Consistency check 1 (512 bits) ok 6 - Consistency check 2 (512 bits) ok 7 - Key generated of size 768 bits ok 8 - Key is 768 bits ok 9 - p of appropriate size (768 bits) ok 10 - q of appropriate size (768 bits) ok 11 - Consistency check 1 (768 bits) ok 12 - Consistency check 2 (768 bits) ok 13 - Key generated of size 1024 bits ok 14 - Key is 1024 bits ok 15 - p of appropriate size (1024 bits) ok 16 - q of appropriate size (1024 bits) ok 17 - Consistency check 1 (1024 bits) ok 18 - Consistency check 2 (1024 bits) ok t/04-pem.t ...... 1..26 ok 1 - Signature created correctly using Crypt::DSA->sign ok 2 - Signature serialized correctly ok 3 - Signature created correctly using Crypt::DSA::Signature ok 4 - ->r of both signatures is identical ok 5 - ->s of both signatures is identical ok 6 - Writing key works. ok 7 - Load key using Crypt::DSA::key ok 8 - ->p of both keys is identical ok 9 - ->q of both keys is identical ok 10 - ->g of both keys is identical ok 11 - ->pub_key of both keys is identical ok 12 - ->priv_key of both keys is identical ok 13 - Writing keyfile with password works ok 14 - Reading keyfile with password works ok 15 - ->p of both keys is identical ok 16 - ->q of both keys is identical ok 17 - ->g of both keys is identical ok 18 - ->pub_key of both keys is identical ok 19 - ->priv_key of both keys is identical ok 20 - Writing keyfile without private key works ok 21 - Reading keyfile without private key works ok 22 - ->p of both keys is identical ok 23 - ->q of both keys is identical ok 24 - ->g of both keys is identical ok 25 - ->pub_key of both keys is identical ok 26 - No private key ok # This takes a couple of minutes on slower machines. t/06-fips.t ..... 1..9 ok 1 - Crypt::DSA->new worked ok 2 - Crypt::DSA::KeyChain->new worked ok 3 - ->p returns expected value ok 4 - ->q returns expected value ok 5 - ->g returns expected value ok 6 - Consistency check 1 ok 7 - Consistency check 2 ok 8 - Consistency check 3 ok 9 - Signing and verifying ok ok t/07-openid.t ... 1..11 ok 1 - Created Crypt::DSA object ok 2 - Parsed key ok 3 - key->p is correct ok 4 - key->q is correct ok 5 - key->g is correct ok 6 - key->pub_key is correct ok 7 - Parsed raw ASN.1 signature ok 8 - Parsed base64-encoded signature ok 9 - sig->r is correct ok 10 - sig->s is correct ok 11 - Signature is verified ok All tests successful. Files=7, Tests=82, 382 wallclock secs ( 0.12 usr 0.05 sys + 381.56 cusr 0.22 csys = 381.95 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libcrypt-dsa-perl-1.17' create-stamp debian/debhelper-build-stamp fakeroot debian/rules binary dh binary dh_testroot dh_prep dh_auto_install --destdir=debian/libcrypt-dsa-perl/ make -j3 install DESTDIR=/build/reproducible-path/libcrypt-dsa-perl-1.17/debian/libcrypt-dsa-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libcrypt-dsa-perl-1.17' Manifying 7 pod documents Installing /build/reproducible-path/libcrypt-dsa-perl-1.17/debian/libcrypt-dsa-perl/usr/share/perl5/Crypt/DSA.pm Installing /build/reproducible-path/libcrypt-dsa-perl-1.17/debian/libcrypt-dsa-perl/usr/share/perl5/Crypt/DSA/Util.pm Installing /build/reproducible-path/libcrypt-dsa-perl-1.17/debian/libcrypt-dsa-perl/usr/share/perl5/Crypt/DSA/Signature.pm Installing /build/reproducible-path/libcrypt-dsa-perl-1.17/debian/libcrypt-dsa-perl/usr/share/perl5/Crypt/DSA/KeyChain.pm Installing /build/reproducible-path/libcrypt-dsa-perl-1.17/debian/libcrypt-dsa-perl/usr/share/perl5/Crypt/DSA/Key.pm Installing /build/reproducible-path/libcrypt-dsa-perl-1.17/debian/libcrypt-dsa-perl/usr/share/perl5/Crypt/DSA/Key/PEM.pm Installing /build/reproducible-path/libcrypt-dsa-perl-1.17/debian/libcrypt-dsa-perl/usr/share/perl5/Crypt/DSA/Key/SSH2.pm Installing /build/reproducible-path/libcrypt-dsa-perl-1.17/debian/libcrypt-dsa-perl/usr/share/man/man3/Crypt::DSA.3pm Installing /build/reproducible-path/libcrypt-dsa-perl-1.17/debian/libcrypt-dsa-perl/usr/share/man/man3/Crypt::DSA::KeyChain.3pm Installing /build/reproducible-path/libcrypt-dsa-perl-1.17/debian/libcrypt-dsa-perl/usr/share/man/man3/Crypt::DSA::Signature.3pm Installing /build/reproducible-path/libcrypt-dsa-perl-1.17/debian/libcrypt-dsa-perl/usr/share/man/man3/Crypt::DSA::Key::PEM.3pm Installing /build/reproducible-path/libcrypt-dsa-perl-1.17/debian/libcrypt-dsa-perl/usr/share/man/man3/Crypt::DSA::Util.3pm Installing /build/reproducible-path/libcrypt-dsa-perl-1.17/debian/libcrypt-dsa-perl/usr/share/man/man3/Crypt::DSA::Key.3pm Installing /build/reproducible-path/libcrypt-dsa-perl-1.17/debian/libcrypt-dsa-perl/usr/share/man/man3/Crypt::DSA::Key::SSH2.3pm make[1]: Leaving directory '/build/reproducible-path/libcrypt-dsa-perl-1.17' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libcrypt-dsa-perl' in '../libcrypt-dsa-perl_1.17-5_all.deb'. dpkg-genbuildinfo --build=binary -O../libcrypt-dsa-perl_1.17-5_armhf.buildinfo dpkg-genchanges --build=binary -O../libcrypt-dsa-perl_1.17-5_armhf.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/7079 and its subdirectories I: Current time: Sat May 11 20:58:00 -12 2024 I: pbuilder-time-stamp: 1715504280 Sun May 12 08:58:07 UTC 2024 I: 1st build successful. Starting 2nd build on remote node virt64z-armhf-rb.debian.net. Sun May 12 08:58:07 UTC 2024 I: Preparing to do remote build '2' on virt64z-armhf-rb.debian.net. Sun May 12 09:01:59 UTC 2024 I: Deleting $TMPDIR on virt64z-armhf-rb.debian.net. Sun May 12 09:02:01 UTC 2024 I: libcrypt-dsa-perl_1.17-5_armhf.changes: Format: 1.8 Date: Sun, 12 Jun 2022 22:21:04 +0100 Source: libcrypt-dsa-perl Binary: libcrypt-dsa-perl Architecture: all Version: 1.17-5 Distribution: unstable Urgency: medium Maintainer: Debian Perl Group Changed-By: Jelmer Vernooij Description: libcrypt-dsa-perl - Perl module for DSA Signatures and Key Generation Changes: libcrypt-dsa-perl (1.17-5) unstable; urgency=medium . [ Salvatore Bonaccorso ] * debian/control: Use HTTPS transport protocol for Vcs-Git URI . [ gregor herrmann ] * debian/copyright: change Copyright-Format 1.0 URL to HTTPS. . [ Alex Muntada ] * Remove inactive pkg-perl members from Uploaders. . [ Salvatore Bonaccorso ] * Update Vcs-* headers for switch to salsa.debian.org . [ Debian Janitor ] * Trim trailing whitespace. * Bump debhelper from deprecated 8 to 12. * Set debhelper-compat version in Build-Depends. * Set upstream metadata fields: Repository. * Add missing build dependency on libmodule-install-perl. . [ gregor herrmann ] * debian/watch: use uscan version 4. Checksums-Sha1: 233613b8b1af179d24fe781dcd9f4d12e2d267b6 27232 libcrypt-dsa-perl_1.17-5_all.deb 779ac6b585ba7d058dd1480289ed895d697373ef 5181 libcrypt-dsa-perl_1.17-5_armhf.buildinfo Checksums-Sha256: 9b17c81bf7bfe04c8b9a67282339434f277e30bf56ce25c0dd49c8451c07d244 27232 libcrypt-dsa-perl_1.17-5_all.deb c56888492422ee39daa4969860f0ac3de245657e7b0584854889280ff501a2af 5181 libcrypt-dsa-perl_1.17-5_armhf.buildinfo Files: c28b7777ff62ace5a60035196a2b14d5 27232 perl optional libcrypt-dsa-perl_1.17-5_all.deb 993fbc91969ee4efb98d64b8aa492413 5181 perl optional libcrypt-dsa-perl_1.17-5_armhf.buildinfo Sun May 12 09:02:02 UTC 2024 I: diffoscope 266 will be used to compare the two builds: Running as unit: rb-diffoscope-armhf_3-5150.service # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.MK2yUBeo/libcrypt-dsa-perl_1.17-5.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.MK2yUBeo/libcrypt-dsa-perl_1.17-5.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.MK2yUBeo/libcrypt-dsa-perl_1.17-5.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.MK2yUBeo/b1/libcrypt-dsa-perl_1.17-5_armhf.changes /srv/reproducible-results/rbuild-debian/r-b-build.MK2yUBeo/b2/libcrypt-dsa-perl_1.17-5_armhf.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.350s) 0.349s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.015s) 0.015s 12 calls diffoscope.comparators.binary.FilesystemFile ## specialize (total time: 0.000s) 0.000s 1 call specialize Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 720ms CPU time consumed: 720ms Sun May 12 09:06:22 UTC 2024 I: diffoscope 266 found no differences in the changes files, and a .buildinfo file also exists. Sun May 12 09:06:22 UTC 2024 I: libcrypt-dsa-perl from trixie built successfully and reproducibly on armhf. Sun May 12 09:06:28 UTC 2024 I: Submitting .buildinfo files to external archives: Sun May 12 09:06:28 UTC 2024 I: Submitting 8.0K b1/libcrypt-dsa-perl_1.17-5_armhf.buildinfo.asc Sun May 12 09:06:47 UTC 2024 I: Submitting 8.0K b2/libcrypt-dsa-perl_1.17-5_armhf.buildinfo.asc Sun May 12 09:07:11 UTC 2024 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Sun May 12 09:07:11 UTC 2024 I: Done submitting .buildinfo files. Sun May 12 09:07:11 UTC 2024 I: Removing signed libcrypt-dsa-perl_1.17-5_armhf.buildinfo.asc files: removed './b1/libcrypt-dsa-perl_1.17-5_armhf.buildinfo.asc' removed './b2/libcrypt-dsa-perl_1.17-5_armhf.buildinfo.asc'