Sun Apr 14 22:31:18 UTC 2024 I: starting to build libcoro-perl/trixie/armhf on jenkins on '2024-04-14 22:31' Sun Apr 14 22:31:18 UTC 2024 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/armhf_6/3102/console.log Sun Apr 14 22:31:18 UTC 2024 I: Downloading source for trixie/libcoro-perl=6.570-3 --2024-04-14 22:31:18-- http://deb.debian.org/debian/pool/main/libc/libcoro-perl/libcoro-perl_6.570-3.dsc Connecting to 78.137.99.97:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2237 (2.2K) [text/prs.lines.tag] Saving to: ‘libcoro-perl_6.570-3.dsc’ 0K .. 100% 269M=0s 2024-04-14 22:31:18 (269 MB/s) - ‘libcoro-perl_6.570-3.dsc’ saved [2237/2237] Sun Apr 14 22:31:18 UTC 2024 I: libcoro-perl_6.570-3.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: libcoro-perl Binary: libcoro-perl Architecture: any Version: 6.570-3 Maintainer: Debian Perl Group Uploaders: gregor herrmann , Xavier Guimard Homepage: https://metacpan.org/release/Coro Standards-Version: 4.6.0 Vcs-Browser: https://salsa.debian.org/perl-team/modules/packages/libcoro-perl Vcs-Git: https://salsa.debian.org/perl-team/modules/packages/libcoro-perl.git Testsuite: autopkgtest-pkg-perl Build-Depends: debhelper-compat (= 13), libanyevent-perl , libcanary-stability-perl, libcommon-sense-perl , libev-perl , libevent-perl , libguard-perl , perl-xs-dev, perl:native Package-List: libcoro-perl deb perl optional arch=any Checksums-Sha1: 1ff1c7aee5cd1c31fbc50c38ab86d0ab0930417d 198128 libcoro-perl_6.570.orig.tar.gz 8eadb79d486e5f0fb1f0f431ef05828b443caa07 8040 libcoro-perl_6.570-3.debian.tar.xz Checksums-Sha256: 1928e48033540e11ebf5506986dd101af78d2421d210f96599223b15d51714c6 198128 libcoro-perl_6.570.orig.tar.gz 8d551de32102795bf390787a89772615483d74ddc535d27a02ad02835110475c 8040 libcoro-perl_6.570-3.debian.tar.xz Files: fa5970a2a2f3df9d68d4369c7dde1a55 198128 libcoro-perl_6.570.orig.tar.gz b0bb002ce51d19104909a02f6c0869bc 8040 libcoro-perl_6.570-3.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQIzBAEBCgAdFiEEsjhixBXWVlpOhsvXV5wWDUyeI+gFAmNILwQACgkQV5wWDUye I+hLbRAApBOXVGzXguBNK9MFoOn4keInrXFxaRWKs2BFQop/9otmx0KDVCQ0SVpq FPWClvUnb5GHtuf4GIF7eC2+oOZ0JNw0qTgiTG7OyGHTeZgrWYI8TwVJykDp0j+M h7YU2vPXml45Tl3AsBUNNVfRq9XrFMYfNTdeHhqfSjBNay3cWUoqaDVW3lxk1c7W Pa6ScOeHdLErodURmBALyW+Jw9AqDDgLHsGaJEngmjN9E7XTtV/UQ1iFiMobSYi8 n/jIOxYLQNZsI7RuQefZb9rnQ2HupLECcwZv5zv709LCw3LhtrHYpnBcN4bPDv2B Tv4Ga/yuoGr/maAzf2ItIl8zQaT8oBCFr95xc4HvWhqkviV9qZpazem+6OfYSy7t O5+5dr+VgmU6FoEnd0YGU5FnJL48t0IIZp//dMpXth5vrcbZtwt/+Yx94u0YgS32 dC5+1qGBPrEzMUqKZxnAg1jwAvOxCSD5qqcX8JHbxNe4iPTm64jkAnfjU9d6tJxl v71abriNuhy30RNBg/LY4/zmdxL+hEvAkfDCglxuyOv5C8d0h2E2kT8Jww8d+vD/ I6Se83Jjyu9FPRVd+e+aRRTSLNQN6GLpTKi5QUJYnNaGUv7//jJN1b0g6V9gsaeZ et1NREutX3m+Ts4OzgCuQPXX3G1it40HAnQXwKneqkEh0SV/Et0= =SebT -----END PGP SIGNATURE----- Sun Apr 14 22:31:18 UTC 2024 I: Checking whether the package is not for us Sun Apr 14 22:31:18 UTC 2024 I: Starting 1st build on remote node virt64b-armhf-rb.debian.net. Sun Apr 14 22:31:18 UTC 2024 I: Preparing to do remote build '1' on virt64b-armhf-rb.debian.net. Sun Apr 14 22:33:45 UTC 2024 I: Deleting $TMPDIR on virt64b-armhf-rb.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Sun Apr 14 10:31:25 -12 2024 I: pbuilder-time-stamp: 1713133885 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libcoro-perl_6.570-3.dsc] I: copying [./libcoro-perl_6.570.orig.tar.gz] I: copying [./libcoro-perl_6.570-3.debian.tar.xz] I: Extracting source gpgv: Signature made Thu Oct 13 15:30:12 2022 gpgv: using RSA key B23862C415D6565A4E86CBD7579C160D4C9E23E8 gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./libcoro-perl_6.570-3.dsc: no acceptable signature found dpkg-source: info: extracting libcoro-perl in libcoro-perl-6.570 dpkg-source: info: unpacking libcoro-perl_6.570.orig.tar.gz dpkg-source: info: unpacking libcoro-perl_6.570-3.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying whatis.patch dpkg-source: info: applying spelling.patch I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/26622/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='armhf' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=3 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='armhf' IFS=' ' INVOCATION_ID='76961e494ba140ecb05671ab02c88f25' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='26622' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.AP7PtyBc/pbuilderrc_kZKc --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.AP7PtyBc/b1 --logfile b1/build.log libcoro-perl_6.570-3.dsc' SUDO_GID='113' SUDO_UID='107' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://10.0.0.15:3142/' I: uname -a Linux virt64b 6.1.0-20-arm64 #1 SMP Debian 6.1.85-1 (2024-04-11) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Apr 14 11:24 /bin -> usr/bin I: user script /srv/workspace/pbuilder/26622/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: armhf Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), libanyevent-perl, libcanary-stability-perl, libcommon-sense-perl, libev-perl, libevent-perl, libguard-perl, perl-xs-dev, perl:native dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19635 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libanyevent-perl; however: Package libanyevent-perl is not installed. pbuilder-satisfydepends-dummy depends on libcanary-stability-perl; however: Package libcanary-stability-perl is not installed. pbuilder-satisfydepends-dummy depends on libcommon-sense-perl; however: Package libcommon-sense-perl is not installed. pbuilder-satisfydepends-dummy depends on libev-perl; however: Package libev-perl is not installed. pbuilder-satisfydepends-dummy depends on libevent-perl; however: Package libevent-perl is not installed. pbuilder-satisfydepends-dummy depends on libguard-perl; however: Package libguard-perl is not installed. pbuilder-satisfydepends-dummy depends on perl-xs-dev; however: Package perl-xs-dev is not installed. pbuilder-satisfydepends-dummy depends on perl:native. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libanyevent-perl{a} libarchive-zip-perl{a} libcanary-stability-perl{a} libcommon-sense-perl{a} libdebhelper-perl{a} libelf1{a} libev-perl{a} libevent-perl{a} libfile-stripnondeterminism-perl{a} libguard-perl{a} libicu72{a} libmagic-mgc{a} libmagic1{a} libperl-dev{a} libpipeline1{a} libsub-override-perl{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libasync-interrupt-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 37 newly installed, 0 to remove and 0 not upgraded. Need to get 20.3 MB of archives. After unpacking 74.2 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main armhf sensible-utils all 0.0.22 [22.4 kB] Get: 2 http://deb.debian.org/debian trixie/main armhf libmagic-mgc armhf 1:5.45-2+b1 [314 kB] Get: 3 http://deb.debian.org/debian trixie/main armhf libmagic1 armhf 1:5.45-2+b1 [97.9 kB] Get: 4 http://deb.debian.org/debian trixie/main armhf file armhf 1:5.45-2+b1 [42.2 kB] Get: 5 http://deb.debian.org/debian trixie/main armhf gettext-base armhf 0.21-14+b1 [157 kB] Get: 6 http://deb.debian.org/debian trixie/main armhf libuchardet0 armhf 0.0.8-1+b1 [65.7 kB] Get: 7 http://deb.debian.org/debian trixie/main armhf groff-base armhf 1.23.0-3 [1088 kB] Get: 8 http://deb.debian.org/debian trixie/main armhf bsdextrautils armhf 2.39.3-6 [81.2 kB] Get: 9 http://deb.debian.org/debian trixie/main armhf libpipeline1 armhf 1.5.7-2 [33.3 kB] Get: 10 http://deb.debian.org/debian trixie/main armhf man-db armhf 2.12.0-3 [1367 kB] Get: 11 http://deb.debian.org/debian trixie/main armhf m4 armhf 1.4.19-4 [264 kB] Get: 12 http://deb.debian.org/debian trixie/main armhf autoconf all 2.71-3 [332 kB] Get: 13 http://deb.debian.org/debian trixie/main armhf autotools-dev all 20220109.1 [51.6 kB] Get: 14 http://deb.debian.org/debian trixie/main armhf automake all 1:1.16.5-1.3 [823 kB] Get: 15 http://deb.debian.org/debian trixie/main armhf autopoint all 0.21-14 [496 kB] Get: 16 http://deb.debian.org/debian trixie/main armhf libdebhelper-perl all 13.15.3 [88.0 kB] Get: 17 http://deb.debian.org/debian trixie/main armhf libtool all 2.4.7-7 [517 kB] Get: 18 http://deb.debian.org/debian trixie/main armhf dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian trixie/main armhf libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian trixie/main armhf libsub-override-perl all 0.10-1 [10.6 kB] Get: 21 http://deb.debian.org/debian trixie/main armhf libfile-stripnondeterminism-perl all 1.13.1-1 [19.4 kB] Get: 22 http://deb.debian.org/debian trixie/main armhf dh-strip-nondeterminism all 1.13.1-1 [8620 B] Get: 23 http://deb.debian.org/debian trixie/main armhf libelf1 armhf 0.190-1+b1 [171 kB] Get: 24 http://deb.debian.org/debian trixie/main armhf dwz armhf 0.15-1 [101 kB] Get: 25 http://deb.debian.org/debian trixie/main armhf libicu72 armhf 72.1-4+b1 [9070 kB] Get: 26 http://deb.debian.org/debian trixie/main armhf libxml2 armhf 2.9.14+dfsg-1.3+b2 [599 kB] Get: 27 http://deb.debian.org/debian trixie/main armhf gettext armhf 0.21-14+b1 [1230 kB] Get: 28 http://deb.debian.org/debian trixie/main armhf intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 29 http://deb.debian.org/debian trixie/main armhf po-debconf all 1.0.21+nmu1 [248 kB] Get: 30 http://deb.debian.org/debian trixie/main armhf debhelper all 13.15.3 [901 kB] Get: 31 http://deb.debian.org/debian trixie/main armhf libanyevent-perl armhf 7.170-2+b4 [384 kB] Get: 32 http://deb.debian.org/debian trixie/main armhf libcanary-stability-perl armhf 2006-5 [9176 B] Get: 33 http://deb.debian.org/debian trixie/main armhf libcommon-sense-perl armhf 3.75-3+b1 [22.9 kB] Get: 34 http://deb.debian.org/debian trixie/main armhf libev-perl armhf 4.34-1+b1 [251 kB] Get: 35 http://deb.debian.org/debian trixie/main armhf libevent-perl armhf 1.28-2+b1 [255 kB] Get: 36 http://deb.debian.org/debian trixie/main armhf libguard-perl armhf 1.023-2+b2 [15.0 kB] Get: 37 http://deb.debian.org/debian trixie/main armhf libperl-dev armhf 5.38.2-3 [973 kB] Fetched 20.3 MB in 1s (30.0 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19635 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.22_all.deb ... Unpacking sensible-utils (0.0.22) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-2+b1_armhf.deb ... Unpacking libmagic-mgc (1:5.45-2+b1) ... Selecting previously unselected package libmagic1:armhf. Preparing to unpack .../02-libmagic1_1%3a5.45-2+b1_armhf.deb ... Unpacking libmagic1:armhf (1:5.45-2+b1) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-2+b1_armhf.deb ... Unpacking file (1:5.45-2+b1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.21-14+b1_armhf.deb ... Unpacking gettext-base (0.21-14+b1) ... Selecting previously unselected package libuchardet0:armhf. Preparing to unpack .../05-libuchardet0_0.0.8-1+b1_armhf.deb ... Unpacking libuchardet0:armhf (0.0.8-1+b1) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-3_armhf.deb ... Unpacking groff-base (1.23.0-3) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.39.3-6_armhf.deb ... Unpacking bsdextrautils (2.39.3-6) ... Selecting previously unselected package libpipeline1:armhf. Preparing to unpack .../08-libpipeline1_1.5.7-2_armhf.deb ... Unpacking libpipeline1:armhf (1.5.7-2) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.12.0-3_armhf.deb ... Unpacking man-db (2.12.0-3) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-4_armhf.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.71-3_all.deb ... Unpacking autoconf (2.71-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.21-14_all.deb ... Unpacking autopoint (0.21-14) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.15.3_all.deb ... Unpacking libdebhelper-perl (13.15.3) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.4.7-7_all.deb ... Unpacking libtool (2.4.7-7) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libsub-override-perl. Preparing to unpack .../19-libsub-override-perl_0.10-1_all.deb ... Unpacking libsub-override-perl (0.10-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../20-libfile-stripnondeterminism-perl_1.13.1-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.13.1-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../21-dh-strip-nondeterminism_1.13.1-1_all.deb ... Unpacking dh-strip-nondeterminism (1.13.1-1) ... Selecting previously unselected package libelf1:armhf. Preparing to unpack .../22-libelf1_0.190-1+b1_armhf.deb ... Unpacking libelf1:armhf (0.190-1+b1) ... Selecting previously unselected package dwz. Preparing to unpack .../23-dwz_0.15-1_armhf.deb ... Unpacking dwz (0.15-1) ... Selecting previously unselected package libicu72:armhf. Preparing to unpack .../24-libicu72_72.1-4+b1_armhf.deb ... Unpacking libicu72:armhf (72.1-4+b1) ... Selecting previously unselected package libxml2:armhf. Preparing to unpack .../25-libxml2_2.9.14+dfsg-1.3+b2_armhf.deb ... Unpacking libxml2:armhf (2.9.14+dfsg-1.3+b2) ... Selecting previously unselected package gettext. Preparing to unpack .../26-gettext_0.21-14+b1_armhf.deb ... Unpacking gettext (0.21-14+b1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../27-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../28-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../29-debhelper_13.15.3_all.deb ... Unpacking debhelper (13.15.3) ... Selecting previously unselected package libanyevent-perl. Preparing to unpack .../30-libanyevent-perl_7.170-2+b4_armhf.deb ... Unpacking libanyevent-perl (7.170-2+b4) ... Selecting previously unselected package libcanary-stability-perl:armhf. Preparing to unpack .../31-libcanary-stability-perl_2006-5_armhf.deb ... Unpacking libcanary-stability-perl:armhf (2006-5) ... Selecting previously unselected package libcommon-sense-perl:armhf. Preparing to unpack .../32-libcommon-sense-perl_3.75-3+b1_armhf.deb ... Unpacking libcommon-sense-perl:armhf (3.75-3+b1) ... Selecting previously unselected package libev-perl:armhf. Preparing to unpack .../33-libev-perl_4.34-1+b1_armhf.deb ... Unpacking libev-perl:armhf (4.34-1+b1) ... Selecting previously unselected package libevent-perl. Preparing to unpack .../34-libevent-perl_1.28-2+b1_armhf.deb ... Unpacking libevent-perl (1.28-2+b1) ... Selecting previously unselected package libguard-perl. Preparing to unpack .../35-libguard-perl_1.023-2+b2_armhf.deb ... Unpacking libguard-perl (1.023-2+b2) ... Selecting previously unselected package libperl-dev:armhf. Preparing to unpack .../36-libperl-dev_5.38.2-3_armhf.deb ... Unpacking libperl-dev:armhf (5.38.2-3) ... Setting up libanyevent-perl (7.170-2+b4) ... Setting up libpipeline1:armhf (1.5.7-2) ... Setting up libicu72:armhf (72.1-4+b1) ... Setting up bsdextrautils (2.39.3-6) ... Setting up libevent-perl (1.28-2+b1) ... Setting up libmagic-mgc (1:5.45-2+b1) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.15.3) ... Setting up libmagic1:armhf (1:5.45-2+b1) ... Setting up libcommon-sense-perl:armhf (3.75-3+b1) ... Setting up gettext-base (0.21-14+b1) ... Setting up m4 (1.4.19-4) ... Setting up libperl-dev:armhf (5.38.2-3) ... Setting up file (1:5.45-2+b1) ... Setting up libcanary-stability-perl:armhf (2006-5) ... Setting up autotools-dev (20220109.1) ... Setting up autopoint (0.21-14) ... Setting up autoconf (2.71-3) ... Setting up sensible-utils (0.0.22) ... Setting up libuchardet0:armhf (0.0.8-1+b1) ... Setting up libsub-override-perl (0.10-1) ... Setting up libev-perl:armhf (4.34-1+b1) ... Setting up libelf1:armhf (0.190-1+b1) ... Setting up libguard-perl (1.023-2+b2) ... Setting up libxml2:armhf (2.9.14+dfsg-1.3+b2) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.13.1-1) ... Setting up gettext (0.21-14+b1) ... Setting up libtool (2.4.7-7) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.13.1-1) ... Setting up dwz (0.15-1) ... Setting up groff-base (1.23.0-3) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.12.0-3) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.15.3) ... Processing triggers for libc-bin (2.37-15) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/reproducible-path/libcoro-perl-6.570/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libcoro-perl_6.570-3_source.changes dpkg-buildpackage: info: source package libcoro-perl dpkg-buildpackage: info: source version 6.570-3 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Jelmer Vernooij dpkg-source --before-build . dpkg-buildpackage: info: host architecture armhf debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -ffile-prefix-map=/build/reproducible-path/libcoro-perl-6.570=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2" "LD=arm-linux-gnueabihf-gcc -g -O2 -ffile-prefix-map=/build/reproducible-path/libcoro-perl-6.570=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now" *** *** The stability canary says: (nothing, it was driven away by harsh weather) *** *** It seems you are running perl version 5.038002, likely the "official" or *** "standard" version. While there is nothing wrong with doing that, *** standard perl versions 5.022 and up are not supported by Coro. *** While this might be fatal, it might also be all right - if you run into *** problems, you might want to downgrade your perl or switch to the *** stability branch. *** *** If everything works fine, you can ignore this message. *** *** Stability canary mini-FAQ: *** *** Do I need to do anything? *** With luck, no. While some distributions are known to fail *** already, most should probably work. This message is here *** to alert you that your perl is not supported by Coro, *** and if things go wrong, you either need to downgrade, or *** sidegrade to the stability variant of your perl version, *** or simply live with the consequences. *** *** What is this canary thing? *** It's purpose is to check support status of Coro with *** respect to your perl version. *** *** What is this "stability branch"? *** It's a branch or fork of the official perl, by schmorp, to *** improve stability and compatibility with existing modules. *** *** How can I skip this prompt on automated installs? *** Set PERL_CANARY_STABILITY_NOPROMPT=1 in your environment. *** More info is in the Canary::Stability manpage. *** *** Long version of this FAQ: http://stableperl.schmorp.de/faq.html *** Stability Branch homepage: http://stableperl.schmorp.de/ *** Continue anyways? [y] y *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Event version 1.28 found, building Event support. EV version 4.34 found, building EV support. Checking if your kit is complete... Looks good *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Coro has a number of configuration options. Due to its maturity, the defaults that Coro chooses are usually fine, so you can decide to skip these questions. Only if something went wrong you should select 'n' here and manually configure Coro, and, of course, report this to the maintainer :) Skip further questions and use defaults (y/n)? [y] y *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Coro can use a number of methods to implement coroutines at the C level. The default chosen is based on your current confguration and is correct in most cases, but you still can chose between these alternatives: u The unix 'ucontext.h' functions are relatively new and not implemented or well-tested in older unices. They allow very fast coroutine creation and reasonably fast switching. They are, however, usually slower than the other alternatives due to an extra syscall done by swapcontext. And while nominally most portable (it's the only POSIX-standardised interface for coroutines), ucontext functions are, as usual, broken on most/all BSDs. s If the ucontext functions are not working or you don't want to use them for other reasons you can try a workaround using setjmp/longjmp/sigaltstack (also standard unix functions). Coroutine creation is rather slow, but switching is very fast (often much faster than with the ucontext functions). Unfortunately, glibc-2.1 and below don't even feature a working sigaltstack. You cannot use this implementation if some other code uses SIGUSR2 or you plan to create coroutines from an alternative signal stack, as both are being used for coroutine creation. a Handcoded assembly. This is the fastest and most compatible method, with the least side effects, if it works, that is. It has been tested on GNU/Linux x86 and x86_64 systems and should work on all x86/x86_64 systems using the SVR ELF ABI (it is also reported to be working on Strawberry Perl for Windows using MinGW). This is the recommended method on supported platforms. When it doesn't work, use another method, such as (s)etjmp/longjmp. l GNU/Linux. Very old GNU/Linux systems (glibc-2.1 and below) need this hack. Since it is very linux-specific it is also quite fast and recommended even for newer versions; when it works, that is (currently x86 and a few others only. If it compiles, it's usually ok). Newer glibc versions (>= 2.5) stop working with this implementation however. i IRIX. For some reason, SGI really does not like to follow POSIX (does that surprise you?), so this workaround might be needed (it's fast), although [s] and [u] should also work now. w Microsoft Windows. Try this on Microsoft Windows when using Cygwin or the MSVC compilers (e.g. ActiveState Perl, but see "a" for Strawberry Perl), although, as there is no standard on how to do this under windows, different environments might work differently. Doh. f Microsoft Windows. Try this on Microsoft Windows if w fails. It is slower and uses a lot more memory, but should be working all the time. p Use pthread API. Try to avoid this option, it was only created to make a point about the programming language shootout. It is unlikely to work with perls that have windows process emulation enabled ("perl threads"). It is also likely the slowest method of implementing coroutines. It might work fine as a last resort, however, as the pthread API is slightly better tested than ucontext functions for example. Of course, not on BSDs, who usually have very broken pthread implementations. Coro tries hard to come up with a suitable default for most systems, so pressing return at the prompt usually does the right thing. If you experience problems (e.g. make test fails) then you should experiment with this setting. Use which implementation, etjmp, ctx, sm, rix, inux,

threads, indows, iber? [s] s Using setjmp/longjmp/sigaltstack implementation Trying to detect stack growth direction (for TEST_sigaltstack) You might see some warnings, this should not concern you. libcoro/conftest.c: In function 'main': libcoro/conftest.c:98:28: error: storage size of 'ss' isn't known 98 | struct sigaltstack ss; | ^~ ***************************************************************************** If the testsuite fails PLEASE provide the following information to Marc Lehmann : operating system name, version, architecture name and this string '|'. Thanks a lot! ***************************************************************************** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Per-context stack size factor: Depending on your settings, Coro tries to share the C stacks is creates as much as possible, but sometimes it needs to allocate a new one. This setting controls the maximum size that gets allocated, and should not be set too high, as memory and address space still is wasted even if it's not fully used. The value entered will be multiplied by sizeof(void *), which is usually 4 on 32-bit systems, and 8 on 64-bit systems. A setting of 16384 (the default) therefore corresponds to a 64k..128k stack, which usually is ample space (you might even want to try 8192 or lower if your program creates many coroutines). On systems supporting mmap and dynamic memory management, the actual memory usually gets allocated on demand, but with many large stacks you can still run out of address space on your typical 32 bit platform (not to forget the pagetables). Some perls (mostly threaded ones and perl compiled under linux 2.6) and some programs (inefficient regexes can use a lot of stack space) may need much, much more: If Coro segfaults with weird backtraces (e.g. in a function prologue) or in t/10_bugs.t, you might want to increase this to 65536 or more. The default should be fine, and can be changed at runtime with Coro::State::cctx_stacksize. C stack size factor? [16384] 16384 using a stacksize of 16384 * sizeof(void*) *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Coro can optionally put a guard area before each stack segment: When the stack is too small and the access is not too far outside the stack (i.e. within the guard area), then the program will safely segfault instead of running into other data. The cost is some additional overhead with is usually negligible, and extra use of address space. The guard area size currently needs to be specified in pages (typical pagesizes are 4k and 8k). The guard area is only enabled on a few hardcoded architectures and is ignored on others. The actual preprocessor expression disables this feature if: !__i386 && !__x86_64 && !__powerpc && !__m68k && !__alpha && !__mips && !__sparc64 The default, as usual, should be just fine. Number of guard pages (0 disables)? [4] 4 *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Coro can tell valgrind about its stacks and so reduce spurious warnings where valgrind would otherwise complain about possible stack switches. Enabling this does not incur noticable runtime or memory overhead, but it requires that you have the header file available. Valgrind support is completely optional, so disabling it is the safe choice. Enable valgrind support (y/n)? [n] n *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Coro can use (or even trick) some perl functions into doing what it needs instead of relying on (some) of its own functions. This might increase chances that it compiles and works, but it could just as well result in memory leaks, crashes or silent data corruption. It certainly does result in slightly slower speed and higher memory consumption, though, so YOU SHOULD ENABLE THIS OPTION ONLY AS A LAST RESORT. Prefer perl functions over coro functions (y/n)? [n] n *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Coro can use a simple JIT compiler to compile a part of the thread switch function at runtime. On perls with windows process emulation (most!), this results in a 50% speed improvement. On sane perls, the gain is much less, usually around 5%. If you enable this option, then the JIT will be enabled, on compatible operating systems and CPUs (currently only x86/amd64 on certain unix clones). Otherwise, it will be disabled. It should be safe to leave on - this setting is only here so you can switch it off in case of problems. Note that some broken kernels (often calling themselves "hardened") break all JIT generation by manipulating some system calls. If you get bus errors or segmentation faults immediately when the JIT is enabled but not without, then note that disabling the JIT only fixes some symptoms, not the underlying problem, and you might run into other problems later. Try to use the JIT compiler, if available? [y] y *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Coro has experimental support for cloning states. This can be used to implement a scheme-like call/cc. However, this doesn't add to the expressiveness in general, and is likely perl-version specific (and perl 5.12 deliberately removed support for it). As such, it is disabled by default. Enable it when you want to play around with it, but note that it isn't supported, and unlikely ever will be. It exists mainly to prove that it could be done - if only it were useful for something. Implement Coro::State->clone method (y/n)? [n] n *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Writing MYMETA.yml and MYMETA.json Writing MYMETA.yml and MYMETA.json Writing MYMETA.yml and MYMETA.json Generating a Unix-style Makefile Writing Makefile for Coro Writing MYMETA.yml and MYMETA.json dh_auto_build make -j3 make[1]: Entering directory '/build/reproducible-path/libcoro-perl-6.570' make[2]: Entering directory '/build/reproducible-path/libcoro-perl-6.570/Coro' cp Coro/Signal.pm blib/lib/Coro/Signal.pm cp Coro/State.pm blib/lib/Coro/State.pm cp Coro/AnyEvent.pm blib/lib/Coro/AnyEvent.pm cp Coro/CoroAPI.h blib/lib/Coro/CoroAPI.h cp Coro/SemaphoreSet.pm blib/lib/Coro/SemaphoreSet.pm cp Coro/Util.pm blib/lib/Coro/Util.pm cp Coro/RWLock.pm blib/lib/Coro/RWLock.pm cp Coro/Channel.pm blib/lib/Coro/Channel.pm cp Coro/Timer.pm blib/lib/Coro/Timer.pm cp Coro/MakeMaker.pm blib/lib/Coro/MakeMaker.pm cp Coro/jit-x86-unix.pl blib/lib/Coro/jit-x86-unix.pl cp Coro.pm blib/lib/Coro.pm cp Coro/LWP.pm blib/lib/Coro/LWP.pm cp Coro/Specific.pm blib/lib/Coro/Specific.pm cp Coro/BDB.pm blib/lib/Coro/BDB.pm cp Coro/Storable.pm blib/lib/Coro/Storable.pm cp Coro/Handle.pm blib/lib/Coro/Handle.pm cp Coro/Select.pm blib/lib/Coro/Select.pm cp Coro/jit-amd64-unix.pl blib/lib/Coro/jit-amd64-unix.pl cp Coro/Semaphore.pm blib/lib/Coro/Semaphore.pm cp Coro/Debug.pm blib/lib/Coro/Debug.pm cp Coro/Socket.pm blib/lib/Coro/Socket.pm cp Coro/AIO.pm blib/lib/Coro/AIO.pm Running Mkbootstrap for State () "/usr/bin/perl" "/usr/share/perl/5.38.2/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.38/ExtUtils/typemap' -typemap '/build/reproducible-path/libcoro-perl-6.570/Coro/typemap' State.xs > State.xsc Skip ../blib/lib/Coro/State.pm (unchanged) Skip ../blib/lib/Coro/Channel.pm (unchanged) cp Intro.pod ../blib/lib/Coro/Intro.pod Skip ../blib/lib/Coro/jit-amd64-unix.pl (unchanged) Skip ../blib/lib/Coro/Util.pm (unchanged) Skip ../blib/lib/Coro/SemaphoreSet.pm (unchanged) Skip ../blib/lib/Coro/Debug.pm (unchanged) Skip ../blib/lib/Coro/Timer.pm (unchanged) Skip ../blib/lib/Coro/MakeMaker.pm (unchanged) Skip ../blib/lib/Coro/Signal.pm (unchanged) Skip ../blib/lib/Coro/Handle.pm (unchanged) Skip ../blib/lib/Coro/Specific.pm (unchanged) Skip ../blib/lib/Coro/AnyEvent.pm (unchanged) Skip ../blib/lib/Coro/Select.pm (unchanged) Skip ../blib/lib/Coro/BDB.pm (unchanged) Skip ../blib/lib/Coro/jit-x86-unix.pl (unchanged) Skip ../blib/lib/Coro/Storable.pm (unchanged) Skip ../blib/lib/Coro/LWP.pm (unchanged) Skip ../blib/lib/Coro/RWLock.pm (unchanged) Skip ../blib/lib/Coro/AIO.pm (unchanged) Skip ../blib/lib/Coro/Semaphore.pm (unchanged) Skip ../blib/lib/Coro/Socket.pm (unchanged) chmod 644 "State.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- State.bs ../blib/arch/auto/Coro/State/State.bs 644 mv State.xsc State.c arm-linux-gnueabihf-gcc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -ffile-prefix-map=/build/reproducible-path/libcoro-perl-6.570=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"6.57\" -DXS_VERSION=\"6.57\" -fPIC "-I/usr/lib/arm-linux-gnueabihf/perl/5.38/CORE" -D_FORTIFY_SOURCE=0 -DCORO_SJLJ -DCORO_STACKSIZE=16384 -DCORO_GUARDPAGES=4 -DCORO_JIT=1 State.c : warning: "_FORTIFY_SOURCE" redefined : note: this is the location of the previous definition rm -f ../blib/arch/auto/Coro/State/State.so arm-linux-gnueabihf-gcc -g -O2 -ffile-prefix-map=/build/reproducible-path/libcoro-perl-6.570=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong State.o -o ../blib/arch/auto/Coro/State/State.so \ \ chmod 755 ../blib/arch/auto/Coro/State/State.so Manifying 20 pod documents make[2]: Leaving directory '/build/reproducible-path/libcoro-perl-6.570/Coro' make[2]: Entering directory '/build/reproducible-path/libcoro-perl-6.570/Event' Running Mkbootstrap for Event () "/usr/bin/perl" "/usr/share/perl/5.38.2/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.38/ExtUtils/typemap' Event.xs > Event.xsc cp Event.pm ../blib/lib/Coro/Event.pm chmod 644 "Event.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Event.bs ../blib/arch/auto/Coro/Event/Event.bs 644 mv Event.xsc Event.c arm-linux-gnueabihf-gcc -c -I/usr/lib/arm-linux-gnueabihf/perl5/5.38/Event -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -ffile-prefix-map=/build/reproducible-path/libcoro-perl-6.570=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"6.57\" -DXS_VERSION=\"6.57\" -fPIC "-I/usr/lib/arm-linux-gnueabihf/perl/5.38/CORE" -DHAVE_EVENT=1 -DHAVE_EV=1 Event.c In file included from Event.xs:8: Event.xs: In function 'boot_Coro__Event': /usr/lib/arm-linux-gnueabihf/perl5/5.38/Event/EventAPI.h:252:15: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 252 | GEventAPI = (struct EventAPI*) SvIV(sv); \ | ^ Event.xs:82:9: note: in expansion of macro 'I_EVENT_API' 82 | I_EVENT_API ("Coro::Event"); | ^~~~~~~~~~~ /usr/lib/arm-linux-gnueabihf/perl5/5.38/Event/EventAPI.h:254:11: warning: format '%d' expects argument of type 'int', but argument 2 has type 'I32' {aka 'long int'} [-Wformat=] 254 | croak("Event::API version mismatch (%d != %d) -- please recompile %s", \ | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 255 | GEventAPI->Ver, EventAPI_VERSION, YourName); \ | ~~~~~~~~~~~~~~ | | | I32 {aka long int} Event.xs:82:9: note: in expansion of macro 'I_EVENT_API' 82 | I_EVENT_API ("Coro::Event"); | ^~~~~~~~~~~ In file included from Event.xs:9: ../Coro/CoroAPI.h:122:14: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 122 | GCoroAPI = (struct CoroAPI*) SvIV (sv); \ | ^ Event.xs:83:9: note: in expansion of macro 'I_CORO_API' 83 | I_CORO_API ("Coro::Event"); | ^~~~~~~~~~ rm -f ../blib/arch/auto/Coro/Event/Event.so arm-linux-gnueabihf-gcc -g -O2 -ffile-prefix-map=/build/reproducible-path/libcoro-perl-6.570=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong Event.o -o ../blib/arch/auto/Coro/Event/Event.so \ \ chmod 755 ../blib/arch/auto/Coro/Event/Event.so Manifying 1 pod document make[2]: Leaving directory '/build/reproducible-path/libcoro-perl-6.570/Event' make[2]: Entering directory '/build/reproducible-path/libcoro-perl-6.570/EV' Running Mkbootstrap for EV () "/usr/bin/perl" "/usr/share/perl/5.38.2/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.38/ExtUtils/typemap' EV.xs > EV.xsc cp EV.pm ../blib/lib/Coro/EV.pm chmod 644 "EV.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- EV.bs ../blib/arch/auto/Coro/EV/EV.bs 644 mv EV.xsc EV.c arm-linux-gnueabihf-gcc -c -I/usr/lib/arm-linux-gnueabihf/perl5/5.38/EV -I/usr/lib/arm-linux-gnueabihf/perl5/5.38 -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -ffile-prefix-map=/build/reproducible-path/libcoro-perl-6.570=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"6.57\" -DXS_VERSION=\"6.57\" -fPIC "-I/usr/lib/arm-linux-gnueabihf/perl/5.38/CORE" -DHAVE_EVENT=1 -DHAVE_EV=1 EV.c In file included from EV.xs:9: EV.xs: In function 'boot_Coro__EV': /usr/lib/arm-linux-gnueabihf/perl5/5.38/EV/EVAPI.h:195:12: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 195 | GEVAPI = (struct EVAPI*) SvIV (sv); \ | ^ EV.xs:358:9: note: in expansion of macro 'I_EV_API' 358 | I_EV_API ("Coro::EV"); | ^~~~~~~~ In file included from EV.xs:10: ../Coro/CoroAPI.h:122:14: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 122 | GCoroAPI = (struct CoroAPI*) SvIV (sv); \ | ^ EV.xs:359:9: note: in expansion of macro 'I_CORO_API' 359 | I_CORO_API ("Coro::EV"); | ^~~~~~~~~~ rm -f ../blib/arch/auto/Coro/EV/EV.so arm-linux-gnueabihf-gcc -g -O2 -ffile-prefix-map=/build/reproducible-path/libcoro-perl-6.570=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong EV.o -o ../blib/arch/auto/Coro/EV/EV.so \ \ chmod 755 ../blib/arch/auto/Coro/EV/EV.so Manifying 1 pod document make[2]: Leaving directory '/build/reproducible-path/libcoro-perl-6.570/EV' Manifying 20 pod documents make[1]: Leaving directory '/build/reproducible-path/libcoro-perl-6.570' dh_auto_test make -j3 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libcoro-perl-6.570' make[2]: Entering directory '/build/reproducible-path/libcoro-perl-6.570/Coro' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- State.bs ../blib/arch/auto/Coro/State/State.bs 644 Manifying 20 pod documents make[2]: Leaving directory '/build/reproducible-path/libcoro-perl-6.570/Coro' make[2]: Entering directory '/build/reproducible-path/libcoro-perl-6.570/Event' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Event.bs ../blib/arch/auto/Coro/Event/Event.bs 644 Manifying 1 pod document make[2]: Leaving directory '/build/reproducible-path/libcoro-perl-6.570/Event' make[2]: Entering directory '/build/reproducible-path/libcoro-perl-6.570/EV' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- EV.bs ../blib/arch/auto/Coro/EV/EV.bs 644 Manifying 1 pod document make[2]: Leaving directory '/build/reproducible-path/libcoro-perl-6.570/EV' make[2]: Entering directory '/build/reproducible-path/libcoro-perl-6.570/Coro' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- State.bs ../blib/arch/auto/Coro/State/State.bs 644 No tests defined for Coro::State extension. make[2]: Leaving directory '/build/reproducible-path/libcoro-perl-6.570/Coro' make[2]: Entering directory '/build/reproducible-path/libcoro-perl-6.570/Event' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Event.bs ../blib/arch/auto/Coro/Event/Event.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, '../blib/lib', '../blib/arch')" t/*.t t/00_basic.t .... 1..5 ok 1 ok 2 ok 3 ok 4 ok 5 ok t/01_unblock.t .. 1..12 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok All tests successful. Files=2, Tests=17, 1 wallclock secs ( 0.06 usr 0.00 sys + 0.18 cusr 0.08 csys = 0.32 CPU) Result: PASS make[2]: Leaving directory '/build/reproducible-path/libcoro-perl-6.570/Event' make[2]: Entering directory '/build/reproducible-path/libcoro-perl-6.570/EV' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- EV.bs ../blib/arch/auto/Coro/EV/EV.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, '../blib/lib', '../blib/arch')" t/*.t t/00_basic.t .... 1..5 ok 1 ok 2 ok 3 ok 4 ok 5 ok t/01_unblock.t .. 1..12 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok All tests successful. Files=2, Tests=17, 1 wallclock secs ( 0.06 usr 0.00 sys + 0.14 cusr 0.06 csys = 0.26 CPU) Result: PASS make[2]: Leaving directory '/build/reproducible-path/libcoro-perl-6.570/EV' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/00_basic.t .......... 1..9 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok t/01_process.t ........ 1..13 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok t/02_channel.t ........ 1..19 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok 18 ok 19 ok t/03_channel.t ........ 1..10 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok t/04_rwlock.t ......... 1..25 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok 18 ok 19 ok 20 ok 21 ok 22 ok 23 ok 24 ok 25 ok t/05_specific.t ....... 1..8 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok t/06_prio.t ........... 1..10 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok t/07_eval.t ........... 1..5 ok 1 ok 2 ok 3 ok 4 ok 5 ok t/08_join.t ........... 1..10 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok t/10_bugs.t ........... 1..3 ok 1 ok 2 ok 3 ok t/11_deadlock.t ....... 1..5 ok 1 ok 2 ok 3 ok 4 ok 5 ok t/12_exit.t ........... 1..5 ok 1 ok 2 ok 3 ok 4 ok 5 ok t/13_diewarn.t ........ 1..7 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok t/14_load.t ........... 1..17 ok 1 # Coro::State () ok 2 # Coro () ok 3 # Coro::MakeMaker () ok 4 # Coro::Signal () ok 5 # Coro::Semaphore () ok 6 # Coro::SemaphoreSet () ok 7 # Coro::Channel () ok 8 # Coro::Specific () ok 9 # Coro::RWLock () ok 10 # Coro::AnyEvent () ok 11 # Coro::Timer () ok 12 # Coro::Util () ok 13 # Coro::Select () ok 14 # Coro::Handle () ok 15 # Coro::Socket () ok 16 # Coro::Storable () ok 17 # Coro::Debug () ok t/15_semaphore.t ...... 1..6 ok 1 # 998 ok 2 ok 3 ok 4 ok 5 ok 6 ok t/16_signal.t ......... 1..18 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok 18 ok t/17_rouse.t .......... 1..5 ok 1 ok 2 ok 3 ok 4 ok 5 ok t/18_winder.t ......... 1..17 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok t/19_handle.t ......... 1..4 ok 1 ok 2 ok 3 ok 4 ok t/20_mutual_cancel.t .. 1..10 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok All tests successful. Files=20, Tests=206, 3 wallclock secs ( 0.14 usr 0.04 sys + 1.04 cusr 0.08 csys = 1.30 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libcoro-perl-6.570' create-stamp debian/debhelper-build-stamp dh_prep debian/rules override_dh_auto_install make[1]: Entering directory '/build/reproducible-path/libcoro-perl-6.570' dh_auto_install make -j3 install DESTDIR=/build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[2]: Entering directory '/build/reproducible-path/libcoro-perl-6.570' make[3]: Entering directory '/build/reproducible-path/libcoro-perl-6.570/Coro' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- State.bs ../blib/arch/auto/Coro/State/State.bs 644 Manifying 20 pod documents make[3]: Leaving directory '/build/reproducible-path/libcoro-perl-6.570/Coro' make[3]: Entering directory '/build/reproducible-path/libcoro-perl-6.570/Event' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Event.bs ../blib/arch/auto/Coro/Event/Event.bs 644 Manifying 1 pod document make[3]: Leaving directory '/build/reproducible-path/libcoro-perl-6.570/Event' make[3]: Entering directory '/build/reproducible-path/libcoro-perl-6.570/EV' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- EV.bs ../blib/arch/auto/Coro/EV/EV.bs 644 Manifying 1 pod document make[3]: Leaving directory '/build/reproducible-path/libcoro-perl-6.570/EV' Manifying 20 pod documents Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.38/auto/Coro/State/State.so Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.38/auto/Coro/Event/Event.so Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.38/auto/Coro/EV/EV.so Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.38/Coro.pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.38/Coro/MakeMaker.pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.38/Coro/CoroAPI.h Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.38/Coro/SemaphoreSet.pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.38/Coro/Intro.pod Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.38/Coro/Handle.pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.38/Coro/Select.pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.38/Coro/Storable.pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.38/Coro/Socket.pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.38/Coro/Specific.pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.38/Coro/Semaphore.pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.38/Coro/AIO.pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.38/Coro/jit-amd64-unix.pl Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.38/Coro/Signal.pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.38/Coro/LWP.pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.38/Coro/EV.pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.38/Coro/RWLock.pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.38/Coro/AnyEvent.pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.38/Coro/BDB.pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.38/Coro/Timer.pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.38/Coro/jit-x86-unix.pl Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.38/Coro/State.pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.38/Coro/Util.pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.38/Coro/Debug.pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.38/Coro/Channel.pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.38/Coro/Event.pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::Intro.3pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::Event.3pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro.3pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::Util.3pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::LWP.3pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::EV.3pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::MakeMaker.3pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::State.3pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::Debug.3pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::Socket.3pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::AIO.3pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::Timer.3pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::Specific.3pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::Select.3pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::RWLock.3pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::Handle.3pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::Signal.3pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::AnyEvent.3pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::SemaphoreSet.3pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::Storable.3pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::Channel.3pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::Semaphore.3pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::BDB.3pm make[2]: Leaving directory '/build/reproducible-path/libcoro-perl-6.570' sed -i '1s|^#!/opt/bin/perl|#!/usr/bin/perl|' /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl//usr/lib/arm-linux-gnueabihf/perl5/5.38/Coro/*.pl make[1]: Leaving directory '/build/reproducible-path/libcoro-perl-6.570' dh_installdocs dh_installchangelogs debian/rules override_dh_installexamples make[1]: Entering directory '/build/reproducible-path/libcoro-perl-6.570' dh_installexamples sed -i '1s|^#!/opt/bin/perl|#!/usr/bin/perl|' /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/share/doc/libcoro-perl/examples/* make[1]: Leaving directory '/build/reproducible-path/libcoro-perl-6.570' dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libcoro-perl' in '../libcoro-perl_6.570-3_armhf.deb'. dpkg-deb: building package 'libcoro-perl-dbgsym' in '../libcoro-perl-dbgsym_6.570-3_armhf.deb'. dpkg-genbuildinfo --build=binary -O../libcoro-perl_6.570-3_armhf.buildinfo dpkg-genchanges --build=binary -O../libcoro-perl_6.570-3_armhf.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/26622 and its subdirectories I: Current time: Sun Apr 14 10:33:37 -12 2024 I: pbuilder-time-stamp: 1713134017 Sun Apr 14 22:33:48 UTC 2024 I: 1st build successful. Starting 2nd build on remote node virt32z-armhf-rb.debian.net. Sun Apr 14 22:33:48 UTC 2024 I: Preparing to do remote build '2' on virt32z-armhf-rb.debian.net. Sun Apr 14 22:35:01 UTC 2024 I: Deleting $TMPDIR on virt32z-armhf-rb.debian.net. Sun Apr 14 22:35:04 UTC 2024 I: libcoro-perl_6.570-3_armhf.changes: Format: 1.8 Date: Thu, 13 Oct 2022 16:29:37 +0100 Source: libcoro-perl Binary: libcoro-perl libcoro-perl-dbgsym Architecture: armhf Version: 6.570-3 Distribution: unstable Urgency: medium Maintainer: Debian Perl Group Changed-By: Jelmer Vernooij Description: libcoro-perl - Perl framework implementing coroutines Changes: libcoro-perl (6.570-3) unstable; urgency=medium . [ Debian Janitor ] * Apply multi-arch hints. + libcoro-perl: Drop Multi-Arch: same. Checksums-Sha1: f3f9ac2d67db214b2eac1a1408e5407fca3e5344 181448 libcoro-perl-dbgsym_6.570-3_armhf.deb 5cd68a92b9ba42d5f3233279c61ecb02a07c321e 5547 libcoro-perl_6.570-3_armhf.buildinfo 5f9a833f48f75c0795303afc3bc3ebf2fd81226a 213192 libcoro-perl_6.570-3_armhf.deb Checksums-Sha256: 7ba9ff480cd6ba32f27c7a71036f393df6dd7b9e326aea6ecc86ba8577a9b58a 181448 libcoro-perl-dbgsym_6.570-3_armhf.deb 06bcf35938f4b6a6ff7dbec39cdf4dcf5af7189ee05d71a08fa63b4448bd44e3 5547 libcoro-perl_6.570-3_armhf.buildinfo 29597bec80cd4bfd22004fa02b9a037e32979ed4df6399865c9e1383420c5211 213192 libcoro-perl_6.570-3_armhf.deb Files: 59b2e2cec892a6858a7ae7ed99c0385a 181448 debug optional libcoro-perl-dbgsym_6.570-3_armhf.deb d7b70b38ae506cce332ff3e9cf52e34e 5547 perl optional libcoro-perl_6.570-3_armhf.buildinfo 9d4d76c0fe948ccdd88057c24e41714e 213192 perl optional libcoro-perl_6.570-3_armhf.deb Sun Apr 14 22:35:05 UTC 2024 I: diffoscope 264 will be used to compare the two builds: Running as unit: rb-diffoscope-armhf_6-3102.service # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.AP7PtyBc/libcoro-perl_6.570-3.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.AP7PtyBc/libcoro-perl_6.570-3.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.AP7PtyBc/libcoro-perl_6.570-3.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.AP7PtyBc/b1/libcoro-perl_6.570-3_armhf.changes /srv/reproducible-results/rbuild-debian/r-b-build.AP7PtyBc/b2/libcoro-perl_6.570-3_armhf.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.345s) 0.345s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.020s) 0.020s 12 calls diffoscope.comparators.binary.FilesystemFile ## specialize (total time: 0.000s) 0.000s 1 call specialize Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 654ms CPU time consumed: 646ms Sun Apr 14 22:35:07 UTC 2024 I: diffoscope 264 found no differences in the changes files, and a .buildinfo file also exists. Sun Apr 14 22:35:07 UTC 2024 I: libcoro-perl from trixie built successfully and reproducibly on armhf. Sun Apr 14 22:35:08 UTC 2024 I: Submitting .buildinfo files to external archives: Sun Apr 14 22:35:08 UTC 2024 I: Submitting 8.0K b1/libcoro-perl_6.570-3_armhf.buildinfo.asc Sun Apr 14 22:35:10 UTC 2024 I: Submitting 8.0K b2/libcoro-perl_6.570-3_armhf.buildinfo.asc Sun Apr 14 22:35:12 UTC 2024 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Sun Apr 14 22:35:12 UTC 2024 I: Done submitting .buildinfo files. Sun Apr 14 22:35:12 UTC 2024 I: Removing signed libcoro-perl_6.570-3_armhf.buildinfo.asc files: removed './b1/libcoro-perl_6.570-3_armhf.buildinfo.asc' removed './b2/libcoro-perl_6.570-3_armhf.buildinfo.asc'