Sun May 12 08:12:44 UTC 2024 I: starting to build libconvert-pem-perl/trixie/armhf on jenkins on '2024-05-12 08:12' Sun May 12 08:12:44 UTC 2024 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/armhf_4/5246/console.log Sun May 12 08:12:44 UTC 2024 I: Downloading source for trixie/libconvert-pem-perl=0.08-3 --2024-05-12 08:12:44-- http://deb.debian.org/debian/pool/main/libc/libconvert-pem-perl/libconvert-pem-perl_0.08-3.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2255 (2.2K) [text/prs.lines.tag] Saving to: ‘libconvert-pem-perl_0.08-3.dsc’ 0K .. 100% 319M=0s 2024-05-12 08:12:44 (319 MB/s) - ‘libconvert-pem-perl_0.08-3.dsc’ saved [2255/2255] Sun May 12 08:12:44 UTC 2024 I: libconvert-pem-perl_0.08-3.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: libconvert-pem-perl Binary: libconvert-pem-perl Architecture: all Version: 0.08-3 Maintainer: Debian Perl Group Uploaders: gregor herrmann Homepage: https://metacpan.org/release/Convert-PEM Standards-Version: 3.9.1 Vcs-Browser: https://salsa.debian.org/perl-team/modules/packages/libconvert-pem-perl Vcs-Git: https://salsa.debian.org/perl-team/modules/packages/libconvert-pem-perl.git Testsuite: autopkgtest-pkg-perl Build-Depends: debhelper-compat (= 13), libmodule-install-perl Build-Depends-Indep: libclass-errorhandler-perl, libconvert-asn1-perl, libcrypt-des-ede3-perl, libtest-base-perl, libtest-exception-perl, perl Package-List: libconvert-pem-perl deb perl optional arch=all Checksums-Sha1: eaee6c317cb8d4002604dacea45ea0d3349398f5 54089 libconvert-pem-perl_0.08.orig.tar.gz ca447cea42dfaf377fcd157ef7b261e9dd1ef829 4336 libconvert-pem-perl_0.08-3.debian.tar.xz Checksums-Sha256: 070ef357af0394d776647ca4b9dd992395617e49f0a5f393c85a29733f100b52 54089 libconvert-pem-perl_0.08.orig.tar.gz 3892b401faa8dfc2ed1bf9b6a3c74d728b0477fa106098989c25e22737ff35b8 4336 libconvert-pem-perl_0.08-3.debian.tar.xz Files: a55c927457035806228e62b403551f13 54089 libconvert-pem-perl_0.08.orig.tar.gz 49d760309c61de1b356bb8c78a31f26c 4336 libconvert-pem-perl_0.08-3.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQIzBAEBCgAdFiEEsjhixBXWVlpOhsvXV5wWDUyeI+gFAmKmVDEACgkQV5wWDUye I+h0MQ//ScAMTdBjeLLUqoXDsDojMdviXJbOTT6GgTmcapfh5Xzn8o0bOZd1dyix EKFydxyADyfoFGk8LL3DaJatz9cKUFyUCw3MCRY4L3KxH8HXIwmgK7Y7WrVl7dXp RHC6Zq/bGVwzFCs4E5hQBQQRvueitGL9rIKJAMYqFzVY54x9ZZuZgIVeC/u6oTQS KUzdU0V//Fm9PvQ7NXrQwdPjx7XsqAGdtyUK4IaA2zxI5ewg75t01B6TOOw5q5i1 cxLZIW0tChTuHXmbJzUOh0BOQmh+vxL6yLLvMi8AFFQuuL8Z5BSLTY/IyS2AWyAK SvMyzYPztm4EmgYGTGgbmP1Hm3WHNSx26LAWdEEyGqgzLax7eCHNBk0q5DroSTZz /HJBLpOkxqNvzI47RckLD49qUs7tq2IuoqlVC18HWjE9ktOnHvpyC2Zjg786I8hT jSff4frQWo38cnPao/X43ROL8VgieCiE2zlxivMm2DTH5lZdBxJuqBtbMaOzVfeH jlaur4SkZUMa+KgRGcrTdtwm8ZqfYxsaRO2Kcw80CDfWW0V/XXtQqz+NOi6e8/DW YYQznTj4CecXg2RrHGNGiFiJ3UauD0BDQWV3EFsLWYR0XnyHXGohIpx8Xoe90Jfc sOHEtcsLjeX3WMK05GmVozWpUJQ7bG/AGVrDXUUGSa5rdA6GQRc= =rGwZ -----END PGP SIGNATURE----- Sun May 12 08:12:45 UTC 2024 I: Checking whether the package is not for us Sun May 12 08:12:45 UTC 2024 I: Starting 1st build on remote node virt64z-armhf-rb.debian.net. Sun May 12 08:12:45 UTC 2024 I: Preparing to do remote build '1' on virt64z-armhf-rb.debian.net. Sun May 12 08:14:02 UTC 2024 I: Deleting $TMPDIR on virt64z-armhf-rb.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Sat May 11 20:12:51 -12 2024 I: pbuilder-time-stamp: 1715501571 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libconvert-pem-perl_0.08-3.dsc] I: copying [./libconvert-pem-perl_0.08.orig.tar.gz] I: copying [./libconvert-pem-perl_0.08-3.debian.tar.xz] I: Extracting source gpgv: Signature made Sun Jun 12 21:01:37 2022 gpgv: using RSA key B23862C415D6565A4E86CBD7579C160D4C9E23E8 gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./libconvert-pem-perl_0.08-3.dsc: no acceptable signature found dpkg-source: info: extracting libconvert-pem-perl in libconvert-pem-perl-0.08 dpkg-source: info: unpacking libconvert-pem-perl_0.08.orig.tar.gz dpkg-source: info: unpacking libconvert-pem-perl_0.08-3.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying clean-inc dpkg-source: info: applying 0001-Do-not-test-the-reason-for-decryption-failure-on-bad.patch I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/25654/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='armhf' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=3 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='armhf' IFS=' ' INVOCATION_ID='00e6c60b1bb242689da56f5743946baa' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='25654' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.0sAZsA6d/pbuilderrc_QfLf --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.0sAZsA6d/b1 --logfile b1/build.log libconvert-pem-perl_0.08-3.dsc' SUDO_GID='110' SUDO_UID='103' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://10.0.0.15:3142/' I: uname -a Linux virt64z 6.1.0-21-arm64 #1 SMP Debian 6.1.90-1 (2024-05-03) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 May 11 11:24 /bin -> usr/bin I: user script /srv/workspace/pbuilder/25654/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: armhf Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), libmodule-install-perl, libclass-errorhandler-perl, libconvert-asn1-perl, libcrypt-des-ede3-perl, libtest-base-perl, libtest-exception-perl, perl dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19446 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libmodule-install-perl; however: Package libmodule-install-perl is not installed. pbuilder-satisfydepends-dummy depends on libclass-errorhandler-perl; however: Package libclass-errorhandler-perl is not installed. pbuilder-satisfydepends-dummy depends on libconvert-asn1-perl; however: Package libconvert-asn1-perl is not installed. pbuilder-satisfydepends-dummy depends on libcrypt-des-ede3-perl; however: Package libcrypt-des-ede3-perl is not installed. pbuilder-satisfydepends-dummy depends on libtest-base-perl; however: Package libtest-base-perl is not installed. pbuilder-satisfydepends-dummy depends on libtest-exception-perl; however: Package libtest-exception-perl is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libalgorithm-diff-perl{a} libarchive-zip-perl{a} libclass-errorhandler-perl{a} libconvert-asn1-perl{a} libcrypt-des-ede3-perl{a} libcrypt-des-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-remove-perl{a} libfile-stripnondeterminism-perl{a} libicu72{a} libmagic-mgc{a} libmagic1t64{a} libmodule-install-perl{a} libmodule-scandeps-perl{a} libpipeline1{a} libspiffy-perl{a} libsub-override-perl{a} libsub-uplevel-perl{a} libtest-base-perl{a} libtest-exception-perl{a} libtext-diff-perl{a} libtool{a} libuchardet0{a} libxml2{a} libyaml-tiny-perl{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libalgorithm-diff-xs-perl libarchive-cpio-perl libfile-homedir-perl libjson-perl libltdl-dev libmail-sendmail-perl libpar-dist-perl libtest-deep-perl libwww-perl libyaml-perl lynx wget 0 packages upgraded, 44 newly installed, 0 to remove and 0 not upgraded. Need to get 18.8 MB of archives. After unpacking 70.0 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main armhf sensible-utils all 0.0.22 [22.4 kB] Get: 2 http://deb.debian.org/debian trixie/main armhf libmagic-mgc armhf 1:5.45-3 [314 kB] Get: 3 http://deb.debian.org/debian trixie/main armhf libmagic1t64 armhf 1:5.45-3 [98.1 kB] Get: 4 http://deb.debian.org/debian trixie/main armhf file armhf 1:5.45-3 [42.0 kB] Get: 5 http://deb.debian.org/debian trixie/main armhf gettext-base armhf 0.21-14+b1 [157 kB] Get: 6 http://deb.debian.org/debian trixie/main armhf libuchardet0 armhf 0.0.8-1+b1 [65.7 kB] Get: 7 http://deb.debian.org/debian trixie/main armhf groff-base armhf 1.23.0-4 [1090 kB] Get: 8 http://deb.debian.org/debian trixie/main armhf bsdextrautils armhf 2.40-8 [85.6 kB] Get: 9 http://deb.debian.org/debian trixie/main armhf libpipeline1 armhf 1.5.7-2 [33.3 kB] Get: 10 http://deb.debian.org/debian trixie/main armhf man-db armhf 2.12.1-1 [1375 kB] Get: 11 http://deb.debian.org/debian trixie/main armhf m4 armhf 1.4.19-4 [264 kB] Get: 12 http://deb.debian.org/debian trixie/main armhf autoconf all 2.71-3 [332 kB] Get: 13 http://deb.debian.org/debian trixie/main armhf autotools-dev all 20220109.1 [51.6 kB] Get: 14 http://deb.debian.org/debian trixie/main armhf automake all 1:1.16.5-1.3 [823 kB] Get: 15 http://deb.debian.org/debian trixie/main armhf autopoint all 0.21-14 [496 kB] Get: 16 http://deb.debian.org/debian trixie/main armhf libdebhelper-perl all 13.15.3 [88.0 kB] Get: 17 http://deb.debian.org/debian trixie/main armhf libtool all 2.4.7-7 [517 kB] Get: 18 http://deb.debian.org/debian trixie/main armhf dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian trixie/main armhf libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian trixie/main armhf libsub-override-perl all 0.10-1 [10.6 kB] Get: 21 http://deb.debian.org/debian trixie/main armhf libfile-stripnondeterminism-perl all 1.13.1-1 [19.4 kB] Get: 22 http://deb.debian.org/debian trixie/main armhf dh-strip-nondeterminism all 1.13.1-1 [8620 B] Get: 23 http://deb.debian.org/debian trixie/main armhf libelf1t64 armhf 0.191-1+b1 [183 kB] Get: 24 http://deb.debian.org/debian trixie/main armhf dwz armhf 0.15-1+b2 [106 kB] Get: 25 http://deb.debian.org/debian trixie/main armhf libicu72 armhf 72.1-4+b1 [9070 kB] Get: 26 http://deb.debian.org/debian trixie/main armhf libxml2 armhf 2.9.14+dfsg-1.3+b3 [598 kB] Get: 27 http://deb.debian.org/debian trixie/main armhf gettext armhf 0.21-14+b1 [1230 kB] Get: 28 http://deb.debian.org/debian trixie/main armhf intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 29 http://deb.debian.org/debian trixie/main armhf po-debconf all 1.0.21+nmu1 [248 kB] Get: 30 http://deb.debian.org/debian trixie/main armhf debhelper all 13.15.3 [901 kB] Get: 31 http://deb.debian.org/debian trixie/main armhf libalgorithm-diff-perl all 1.201-1 [43.3 kB] Get: 32 http://deb.debian.org/debian trixie/main armhf libclass-errorhandler-perl all 0.04-3 [6052 B] Get: 33 http://deb.debian.org/debian trixie/main armhf libconvert-asn1-perl all 0.34-1 [44.5 kB] Get: 34 http://deb.debian.org/debian trixie/main armhf libcrypt-des-perl armhf 2.07-4+b4 [17.1 kB] Get: 35 http://deb.debian.org/debian trixie/main armhf libcrypt-des-ede3-perl all 0.01-3 [6384 B] Get: 36 http://deb.debian.org/debian trixie/main armhf libfile-remove-perl all 1.61-2 [16.1 kB] Get: 37 http://deb.debian.org/debian trixie/main armhf libmodule-scandeps-perl all 1.35-1 [43.7 kB] Get: 38 http://deb.debian.org/debian trixie/main armhf libyaml-tiny-perl all 1.74-1 [30.7 kB] Get: 39 http://deb.debian.org/debian trixie/main armhf libmodule-install-perl all 1.21-2 [139 kB] Get: 40 http://deb.debian.org/debian trixie/main armhf libspiffy-perl all 0.46-1 [25.7 kB] Get: 41 http://deb.debian.org/debian trixie/main armhf libsub-uplevel-perl all 0.2800-3 [14.0 kB] Get: 42 http://deb.debian.org/debian trixie/main armhf libtext-diff-perl all 1.45-2 [27.2 kB] Get: 43 http://deb.debian.org/debian trixie/main armhf libtest-base-perl all 0.89-3 [34.7 kB] Get: 44 http://deb.debian.org/debian trixie/main armhf libtest-exception-perl all 0.43-3 [16.9 kB] Fetched 18.8 MB in 0s (41.5 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19446 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.22_all.deb ... Unpacking sensible-utils (0.0.22) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3_armhf.deb ... Unpacking libmagic-mgc (1:5.45-3) ... Selecting previously unselected package libmagic1t64:armhf. Preparing to unpack .../02-libmagic1t64_1%3a5.45-3_armhf.deb ... Unpacking libmagic1t64:armhf (1:5.45-3) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-3_armhf.deb ... Unpacking file (1:5.45-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.21-14+b1_armhf.deb ... Unpacking gettext-base (0.21-14+b1) ... Selecting previously unselected package libuchardet0:armhf. Preparing to unpack .../05-libuchardet0_0.0.8-1+b1_armhf.deb ... Unpacking libuchardet0:armhf (0.0.8-1+b1) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-4_armhf.deb ... Unpacking groff-base (1.23.0-4) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.40-8_armhf.deb ... Unpacking bsdextrautils (2.40-8) ... Selecting previously unselected package libpipeline1:armhf. Preparing to unpack .../08-libpipeline1_1.5.7-2_armhf.deb ... Unpacking libpipeline1:armhf (1.5.7-2) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.12.1-1_armhf.deb ... Unpacking man-db (2.12.1-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-4_armhf.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.71-3_all.deb ... Unpacking autoconf (2.71-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.21-14_all.deb ... Unpacking autopoint (0.21-14) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.15.3_all.deb ... Unpacking libdebhelper-perl (13.15.3) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.4.7-7_all.deb ... Unpacking libtool (2.4.7-7) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libsub-override-perl. Preparing to unpack .../19-libsub-override-perl_0.10-1_all.deb ... Unpacking libsub-override-perl (0.10-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../20-libfile-stripnondeterminism-perl_1.13.1-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.13.1-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../21-dh-strip-nondeterminism_1.13.1-1_all.deb ... Unpacking dh-strip-nondeterminism (1.13.1-1) ... Selecting previously unselected package libelf1t64:armhf. Preparing to unpack .../22-libelf1t64_0.191-1+b1_armhf.deb ... Unpacking libelf1t64:armhf (0.191-1+b1) ... Selecting previously unselected package dwz. Preparing to unpack .../23-dwz_0.15-1+b2_armhf.deb ... Unpacking dwz (0.15-1+b2) ... Selecting previously unselected package libicu72:armhf. Preparing to unpack .../24-libicu72_72.1-4+b1_armhf.deb ... Unpacking libicu72:armhf (72.1-4+b1) ... Selecting previously unselected package libxml2:armhf. Preparing to unpack .../25-libxml2_2.9.14+dfsg-1.3+b3_armhf.deb ... Unpacking libxml2:armhf (2.9.14+dfsg-1.3+b3) ... Selecting previously unselected package gettext. Preparing to unpack .../26-gettext_0.21-14+b1_armhf.deb ... Unpacking gettext (0.21-14+b1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../27-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../28-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../29-debhelper_13.15.3_all.deb ... Unpacking debhelper (13.15.3) ... Selecting previously unselected package libalgorithm-diff-perl. Preparing to unpack .../30-libalgorithm-diff-perl_1.201-1_all.deb ... Unpacking libalgorithm-diff-perl (1.201-1) ... Selecting previously unselected package libclass-errorhandler-perl. Preparing to unpack .../31-libclass-errorhandler-perl_0.04-3_all.deb ... Unpacking libclass-errorhandler-perl (0.04-3) ... Selecting previously unselected package libconvert-asn1-perl. Preparing to unpack .../32-libconvert-asn1-perl_0.34-1_all.deb ... Unpacking libconvert-asn1-perl (0.34-1) ... Selecting previously unselected package libcrypt-des-perl:armhf. Preparing to unpack .../33-libcrypt-des-perl_2.07-4+b4_armhf.deb ... Unpacking libcrypt-des-perl:armhf (2.07-4+b4) ... Selecting previously unselected package libcrypt-des-ede3-perl. Preparing to unpack .../34-libcrypt-des-ede3-perl_0.01-3_all.deb ... Unpacking libcrypt-des-ede3-perl (0.01-3) ... Selecting previously unselected package libfile-remove-perl. Preparing to unpack .../35-libfile-remove-perl_1.61-2_all.deb ... Unpacking libfile-remove-perl (1.61-2) ... Selecting previously unselected package libmodule-scandeps-perl. Preparing to unpack .../36-libmodule-scandeps-perl_1.35-1_all.deb ... Unpacking libmodule-scandeps-perl (1.35-1) ... Selecting previously unselected package libyaml-tiny-perl. Preparing to unpack .../37-libyaml-tiny-perl_1.74-1_all.deb ... Unpacking libyaml-tiny-perl (1.74-1) ... Selecting previously unselected package libmodule-install-perl. Preparing to unpack .../38-libmodule-install-perl_1.21-2_all.deb ... Unpacking libmodule-install-perl (1.21-2) ... Selecting previously unselected package libspiffy-perl. Preparing to unpack .../39-libspiffy-perl_0.46-1_all.deb ... Unpacking libspiffy-perl (0.46-1) ... Selecting previously unselected package libsub-uplevel-perl. Preparing to unpack .../40-libsub-uplevel-perl_0.2800-3_all.deb ... Unpacking libsub-uplevel-perl (0.2800-3) ... Selecting previously unselected package libtext-diff-perl. Preparing to unpack .../41-libtext-diff-perl_1.45-2_all.deb ... Unpacking libtext-diff-perl (1.45-2) ... Selecting previously unselected package libtest-base-perl. Preparing to unpack .../42-libtest-base-perl_0.89-3_all.deb ... Unpacking libtest-base-perl (0.89-3) ... Selecting previously unselected package libtest-exception-perl. Preparing to unpack .../43-libtest-exception-perl_0.43-3_all.deb ... Unpacking libtest-exception-perl (0.43-3) ... Setting up libfile-remove-perl (1.61-2) ... Setting up libpipeline1:armhf (1.5.7-2) ... Setting up libicu72:armhf (72.1-4+b1) ... Setting up bsdextrautils (2.40-8) ... Setting up libmagic-mgc (1:5.45-3) ... Setting up libalgorithm-diff-perl (1.201-1) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.15.3) ... Setting up libmagic1t64:armhf (1:5.45-3) ... Setting up gettext-base (0.21-14+b1) ... Setting up m4 (1.4.19-4) ... Setting up file (1:5.45-3) ... Setting up libclass-errorhandler-perl (0.04-3) ... Setting up libyaml-tiny-perl (1.74-1) ... Setting up libelf1t64:armhf (0.191-1+b1) ... Setting up autotools-dev (20220109.1) ... Setting up libcrypt-des-perl:armhf (2.07-4+b4) ... Setting up libtext-diff-perl (1.45-2) ... Setting up autopoint (0.21-14) ... Setting up libspiffy-perl (0.46-1) ... Setting up autoconf (2.71-3) ... Setting up dwz (0.15-1+b2) ... Setting up sensible-utils (0.0.22) ... Setting up libuchardet0:armhf (0.0.8-1+b1) ... Setting up libsub-uplevel-perl (0.2800-3) ... Setting up libsub-override-perl (0.10-1) ... Setting up libconvert-asn1-perl (0.34-1) ... Setting up libxml2:armhf (2.9.14+dfsg-1.3+b3) ... Setting up libmodule-scandeps-perl (1.35-1) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.13.1-1) ... Setting up libcrypt-des-ede3-perl (0.01-3) ... Setting up gettext (0.21-14+b1) ... Setting up libtool (2.4.7-7) ... Setting up libtest-base-perl (0.89-3) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up libtest-exception-perl (0.43-3) ... Setting up libmodule-install-perl (1.21-2) ... Setting up dh-strip-nondeterminism (1.13.1-1) ... Setting up groff-base (1.23.0-4) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.12.1-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.15.3) ... Processing triggers for libc-bin (2.38-10) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.33-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/reproducible-path/libconvert-pem-perl-0.08/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libconvert-pem-perl_0.08-3_source.changes dpkg-buildpackage: info: source package libconvert-pem-perl dpkg-buildpackage: info: source version 0.08-3 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Jelmer Vernooij dpkg-source --before-build . dpkg-buildpackage: info: host architecture armhf fakeroot debian/rules clean dh clean dh_clean debian/rules build dh build dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libconvert-pem-perl-0.08=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2" "LD=arm-linux-gnueabihf-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libconvert-pem-perl-0.08=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -Wl,-z,relro" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Convert::PEM Writing MYMETA.yml and MYMETA.json dh_auto_build make -j3 make[1]: Entering directory '/build/reproducible-path/libconvert-pem-perl-0.08' cp lib/Convert/PEM.pm blib/lib/Convert/PEM.pm cp lib/Convert/PEM/CBC.pm blib/lib/Convert/PEM/CBC.pm Manifying 2 pod documents make[1]: Leaving directory '/build/reproducible-path/libconvert-pem-perl-0.08' dh_auto_test make -j3 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libconvert-pem-perl-0.08' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'inc', 'blib/lib', 'blib/arch')" t/*.t t/00-compile.t .... 1..1 ok 1 - use Convert::PEM; ok t/01-readwrite.t .. 1..15 ok 1 - An object of class 'Convert::PEM' isa 'Convert::PEM' ok 2 - can write ok 3 - output file exists ok 4 - can read ok 5 - input matches output ok 6 - can write ok 7 - output file exists ok 8 - can read ok 9 - cannot read encrypted file ok 10 - can read ok 11 - input matches output ok 12 - can write ok 13 - output file exists ok 14 - can read ok 15 - input matches output ok t/02-encode.t ..... 1..8 ok 1 - An object of class 'Convert::PEM' isa 'Convert::PEM' ok 2 - encode gave us something ok 3 - input matches output ok 4 - encode gave us something ok 5 - decode fails on encrypted input ok 6 - input matches output ok 7 - encode gave us something ok 8 - input matches output ok t/03-ede3.t ....... 1..6 ok 1 - An object of class 'Convert::PEM::CBC' isa 'Convert::PEM::CBC' ok 2 - An object of class 'Convert::PEM::CBC' isa 'Convert::PEM::CBC' ok 3 - got something from encrypt ok 4 - got something from decrypt ok 5 - input1 matches output1 ok 6 - input2 matches output2 ok t/04-explode.t .... 1..4 ok 1 - An object of class 'Convert::PEM' isa 'Convert::PEM' ok 2 - explode with unix line break ok 3 - explode with dos line break ok 4 - explode with old mac line break ok All tests successful. Files=5, Tests=34, 1 wallclock secs ( 0.04 usr 0.02 sys + 1.06 cusr 0.16 csys = 1.28 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libconvert-pem-perl-0.08' create-stamp debian/debhelper-build-stamp fakeroot debian/rules binary dh binary dh_testroot dh_prep dh_auto_install --destdir=debian/libconvert-pem-perl/ make -j3 install DESTDIR=/build/reproducible-path/libconvert-pem-perl-0.08/debian/libconvert-pem-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libconvert-pem-perl-0.08' Manifying 2 pod documents Installing /build/reproducible-path/libconvert-pem-perl-0.08/debian/libconvert-pem-perl/usr/share/perl5/Convert/PEM.pm Installing /build/reproducible-path/libconvert-pem-perl-0.08/debian/libconvert-pem-perl/usr/share/perl5/Convert/PEM/CBC.pm Installing /build/reproducible-path/libconvert-pem-perl-0.08/debian/libconvert-pem-perl/usr/share/man/man3/Convert::PEM::CBC.3pm Installing /build/reproducible-path/libconvert-pem-perl-0.08/debian/libconvert-pem-perl/usr/share/man/man3/Convert::PEM.3pm make[1]: Leaving directory '/build/reproducible-path/libconvert-pem-perl-0.08' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libconvert-pem-perl' in '../libconvert-pem-perl_0.08-3_all.deb'. dpkg-genbuildinfo --build=binary -O../libconvert-pem-perl_0.08-3_armhf.buildinfo dpkg-genchanges --build=binary -O../libconvert-pem-perl_0.08-3_armhf.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/25654 and its subdirectories I: Current time: Sat May 11 20:13:57 -12 2024 I: pbuilder-time-stamp: 1715501637 Sun May 12 08:14:04 UTC 2024 I: 1st build successful. Starting 2nd build on remote node ff4a-armhf-rb.debian.net. Sun May 12 08:14:04 UTC 2024 I: Preparing to do remote build '2' on ff4a-armhf-rb.debian.net. Sun May 12 08:15:24 UTC 2024 I: Deleting $TMPDIR on ff4a-armhf-rb.debian.net. Sun May 12 08:15:27 UTC 2024 I: libconvert-pem-perl_0.08-3_armhf.changes: Format: 1.8 Date: Sun, 12 Jun 2022 22:01:10 +0100 Source: libconvert-pem-perl Binary: libconvert-pem-perl Architecture: all Version: 0.08-3 Distribution: unstable Urgency: medium Maintainer: Debian Perl Group Changed-By: Jelmer Vernooij Description: libconvert-pem-perl - Perl module for reading/writing encrypted ASN.1 PEM files Changes: libconvert-pem-perl (0.08-3) unstable; urgency=medium . [ Salvatore Bonaccorso ] * debian/control: Use HTTPS transport protocol for Vcs-Git URI . [ gregor herrmann ] * debian/copyright: change Copyright-Format 1.0 URL to HTTPS. * Remove Deepak Tripathi from Uploaders. Thanks for your work! * Remove Jose Luis Rivas from Uploaders. Thanks for your work! . [ Salvatore Bonaccorso ] * Update Vcs-* headers for switch to salsa.debian.org . [ Laurent Baillet ] * fix lintian file-contains-trailing-whitespace warning . [ gregor herrmann ] * debian/watch: use uscan version 4. . [ Debian Janitor ] * Bump debhelper from deprecated 7 to 12. * Set debhelper-compat version in Build-Depends. * Set upstream metadata fields: Repository, Repository-Browse. * Add missing build dependency on libmodule-install-perl. Checksums-Sha1: defcd9756cafb03f1528474127cd210647aecda5 16816 libconvert-pem-perl_0.08-3_all.deb 7ed21ec3dda961148085a55b9156ba86ba260d08 5209 libconvert-pem-perl_0.08-3_armhf.buildinfo Checksums-Sha256: 05e577b6a045d58da949d2efaee2e7eccd3416c146176b3018114f03f7fd13b1 16816 libconvert-pem-perl_0.08-3_all.deb 351c3bdad88b7c704fbc92b909e36adc7febdffbd3a1424b76549d0671dede7d 5209 libconvert-pem-perl_0.08-3_armhf.buildinfo Files: dca6f0fe04202e931b9bc1eb7cb3a0ec 16816 perl optional libconvert-pem-perl_0.08-3_all.deb b814c17a6d5a2e9e7e0f35c965829e1a 5209 perl optional libconvert-pem-perl_0.08-3_armhf.buildinfo Sun May 12 08:15:28 UTC 2024 I: diffoscope 266 will be used to compare the two builds: Running as unit: rb-diffoscope-armhf_4-5246.service # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.0sAZsA6d/libconvert-pem-perl_0.08-3.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.0sAZsA6d/libconvert-pem-perl_0.08-3.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.0sAZsA6d/libconvert-pem-perl_0.08-3.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.0sAZsA6d/b1/libconvert-pem-perl_0.08-3_armhf.changes /srv/reproducible-results/rbuild-debian/r-b-build.0sAZsA6d/b2/libconvert-pem-perl_0.08-3_armhf.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.387s) 0.387s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.016s) 0.016s 12 calls diffoscope.comparators.binary.FilesystemFile ## specialize (total time: 0.000s) 0.000s 1 call specialize Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 771ms CPU time consumed: 757ms Sun May 12 08:49:26 UTC 2024 I: diffoscope 266 found no differences in the changes files, and a .buildinfo file also exists. Sun May 12 08:49:26 UTC 2024 I: libconvert-pem-perl from trixie built successfully and reproducibly on armhf. Sun May 12 08:49:31 UTC 2024 I: Submitting .buildinfo files to external archives: Sun May 12 08:49:31 UTC 2024 I: Submitting 8.0K b1/libconvert-pem-perl_0.08-3_armhf.buildinfo.asc Sun May 12 08:49:35 UTC 2024 I: Submitting 8.0K b2/libconvert-pem-perl_0.08-3_armhf.buildinfo.asc Sun May 12 08:50:00 UTC 2024 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Sun May 12 08:50:00 UTC 2024 I: Done submitting .buildinfo files. Sun May 12 08:50:00 UTC 2024 I: Removing signed libconvert-pem-perl_0.08-3_armhf.buildinfo.asc files: removed './b1/libconvert-pem-perl_0.08-3_armhf.buildinfo.asc' removed './b2/libconvert-pem-perl_0.08-3_armhf.buildinfo.asc'