Thu May 9 17:34:34 UTC 2024 I: starting to build ldapvi/trixie/armhf on jenkins on '2024-05-09 17:34' Thu May 9 17:34:34 UTC 2024 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/armhf_14/4486/console.log Thu May 9 17:34:34 UTC 2024 I: Downloading source for trixie/ldapvi=1.7-11 --2024-05-09 17:34:34-- http://deb.debian.org/debian/pool/main/l/ldapvi/ldapvi_1.7-11.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 1777 (1.7K) [text/prs.lines.tag] Saving to: ‘ldapvi_1.7-11.dsc’ 0K . 100% 251M=0s 2024-05-09 17:34:34 (251 MB/s) - ‘ldapvi_1.7-11.dsc’ saved [1777/1777] Thu May 9 17:34:34 UTC 2024 I: ldapvi_1.7-11.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: ldapvi Binary: ldapvi Architecture: any Version: 1.7-11 Maintainer: Rhonda D'Vine Homepage: http://www.lichteblau.com/ldapvi/ Standards-Version: 3.9.6 Build-Depends: debhelper (>= 9~), libldap-dev, libglib2.0-dev, libpopt-dev, libncurses-dev, libsasl2-dev, libreadline-dev, xsltproc Package-List: ldapvi deb text optional arch=any Checksums-Sha1: d1cde4cbb618180f9ae0e77c56a1520b8ad61c9a 119503 ldapvi_1.7.orig.tar.gz 707c8d4bd18f8dc8f0a93dd641a3b6c2a4fdd377 9592 ldapvi_1.7-11.debian.tar.xz Checksums-Sha256: 6f62e92d20ff2ac0d06125024a914b8622e5b8a0a0c2d390bf3e7990cbd2e153 119503 ldapvi_1.7.orig.tar.gz bba97940aa50f74e72a67a6b710e0847f018064a5f053c69033cb46890786b17 9592 ldapvi_1.7-11.debian.tar.xz Files: 6dc2f5441ac5f1e2b5b036e3521012cc 119503 ldapvi_1.7.orig.tar.gz 786ccd3dda4a74eff4139d91df1b9dd0 9592 ldapvi_1.7-11.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQIzBAEBCgAdFiEEfncpR22H1vEdkazLwpPntGGCWs4FAmYrxcIACgkQwpPntGGC Ws6nRg/+LGDzxfGa0Tth97nRZsyURrYNF23lqr/4Q+ZmLHITOlio48FQdbiAJ32d yemU2xXza/5lsUTvliy9wsFP7EAzbymK9sKGOnGOlR+8eGP5mlhEmQ+yRTzCWmAg Capm5WBj9ELtQeg0qtQuQgDo1nKYYYDJG+DKXadZMvO2NgJeA10CA2xwsCY2AO9Z doy6SH7jIgDMZ1DFEthFH34J3ql6x7KWeBFW84CIrk4IHhi+Prg3acV5wj3cXcFs uoWaTWdX5slBxOaNcJXs3iQ6cWCSkxAmaQCTiCwVgrC/h2vsNIE6cUYVsPEZvAz8 Ijvt3MzTys7KoBCM8ImfAHY2VvVc0/APjQ5CafhNdnNcCwxDxQ7U5kzC3+sP7gGn um41+BHrnqJqP8+op7Zhf7ZhhMqsCBEJ2//BiRwjji/SMW9A0tRnu0VJfCbfZ7Sh yT+6Xy9//sj1vNMl6gquv4AulbE6R+XMMJlv5iBh+PhbUkyWbtVsP7r5nLRgMaWb SZmPkgFL1e5vtWlzfyJytZ6ma01DzZb65a/JJSyg1WPhvkRoNg0hoymgND75Lr1s YQqQemLPp8RhfOwKQ2N0Sj/Mg8WdiQ5xoINY4zfBLlK5cUggH6Udxb/oUW/lcpv3 Orf1LgaGbsOl2TzUcLdvaqp7Ear6Ikudz66rYNKAXUpfCEXHwuc= =unUm -----END PGP SIGNATURE----- Thu May 9 17:34:34 UTC 2024 I: Checking whether the package is not for us Thu May 9 17:34:34 UTC 2024 I: Starting 1st build on remote node virt32z-armhf-rb.debian.net. Thu May 9 17:34:34 UTC 2024 I: Preparing to do remote build '1' on virt32z-armhf-rb.debian.net. Thu May 9 17:36:00 UTC 2024 I: Deleting $TMPDIR on virt32z-armhf-rb.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Thu May 9 05:34:40 -12 2024 I: pbuilder-time-stamp: 1715276080 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [ldapvi_1.7-11.dsc] I: copying [./ldapvi_1.7.orig.tar.gz] I: copying [./ldapvi_1.7-11.debian.tar.xz] I: Extracting source gpgv: Signature made Fri Apr 26 15:18:26 2024 gpgv: using RSA key 7E7729476D87D6F11D91ACCBC293E7B461825ACE gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./ldapvi_1.7-11.dsc: no acceptable signature found dpkg-source: info: extracting ldapvi in ldapvi-1.7 dpkg-source: info: unpacking ldapvi_1.7.orig.tar.gz dpkg-source: info: unpacking ldapvi_1.7-11.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying 01_disable-libcrypto dpkg-source: info: applying 02_sensible-editor-pager dpkg-source: info: applying 03_unpaged-help dpkg-source: info: applying 04_manpage-hyphen dpkg-source: info: applying 05_getline-conflict dpkg-source: info: applying 06_fix-vim-modeline dpkg-source: info: applying 07_diff.c-Use-public-interface-ldap_bv2dn-instead-of-ld.patch dpkg-source: info: applying 08_ftbfs-implicit-function-declaration.patch I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/29065/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='armhf' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=3 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='armhf' IFS=' ' INVOCATION_ID='3f252adc132b4bc1b19c91ce9d74994d' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='29065' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.rKILYNIl/pbuilderrc_PqlO --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.rKILYNIl/b1 --logfile b1/build.log ldapvi_1.7-11.dsc' SUDO_GID='110' SUDO_UID='103' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://10.0.0.15:3142/' I: uname -a Linux virt32z 6.1.0-21-armmp-lpae #1 SMP Debian 6.1.90-1 (2024-05-03) armv7l GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 May 7 11:24 /bin -> usr/bin I: user script /srv/workspace/pbuilder/29065/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: armhf Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper (>= 9~), libldap-dev, libglib2.0-dev, libpopt-dev, libncurses-dev, libsasl2-dev, libreadline-dev, xsltproc dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19445 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper (>= 9~); however: Package debhelper is not installed. pbuilder-satisfydepends-dummy depends on libldap-dev; however: Package libldap-dev is not installed. pbuilder-satisfydepends-dummy depends on libglib2.0-dev; however: Package libglib2.0-dev is not installed. pbuilder-satisfydepends-dummy depends on libpopt-dev; however: Package libpopt-dev is not installed. pbuilder-satisfydepends-dummy depends on libncurses-dev; however: Package libncurses-dev is not installed. pbuilder-satisfydepends-dummy depends on libsasl2-dev; however: Package libsasl2-dev is not installed. pbuilder-satisfydepends-dummy depends on libreadline-dev; however: Package libreadline-dev is not installed. pbuilder-satisfydepends-dummy depends on xsltproc; however: Package xsltproc is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libblkid-dev{a} libdebhelper-perl{a} libelf1t64{a} libexpat1{a} libffi-dev{a} libfile-stripnondeterminism-perl{a} libgirepository-2.0-0{a} libglib2.0-0t64{a} libglib2.0-bin{a} libglib2.0-data{a} libglib2.0-dev{a} libglib2.0-dev-bin{a} libicu72{a} libldap-2.5-0{a} libldap-dev{a} libmagic-mgc{a} libmagic1t64{a} libmount-dev{a} libncurses-dev{a} libncurses6{a} libpcre2-16-0{a} libpcre2-32-0{a} libpcre2-dev{a} libpcre2-posix3{a} libpipeline1{a} libpkgconf3{a} libpopt-dev{a} libpopt0{a} libpython3-stdlib{a} libpython3.11-minimal{a} libpython3.11-stdlib{a} libreadline-dev{a} libreadline8t64{a} libsasl2-2{a} libsasl2-dev{a} libsasl2-modules-db{a} libselinux1-dev{a} libsepol-dev{a} libssl-dev{a} libsub-override-perl{a} libsysprof-capture-4-dev{a} libtool{a} libuchardet0{a} libxml2{a} libxslt1.1{a} m4{a} man-db{a} media-types{a} netbase{a} pkgconf{a} pkgconf-bin{a} po-debconf{a} python3{a} python3-minimal{a} python3-packaging{a} python3.11{a} python3.11-minimal{a} readline-common{a} sensible-utils{a} tzdata{a} uuid-dev{a} xsltproc{a} zlib1g-dev{a} The following packages are RECOMMENDED but will NOT be installed: ca-certificates curl libarchive-cpio-perl libgpm2 libldap-common libltdl-dev libmail-sendmail-perl libsasl2-modules lynx shared-mime-info wget xdg-user-dirs 0 packages upgraded, 78 newly installed, 0 to remove and 0 not upgraded. Need to get 35.4 MB of archives. After unpacking 135 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main armhf libpython3.11-minimal armhf 3.11.9-1 [805 kB] Get: 2 http://deb.debian.org/debian trixie/main armhf libexpat1 armhf 2.6.2-1 [83.5 kB] Get: 3 http://deb.debian.org/debian trixie/main armhf python3.11-minimal armhf 3.11.9-1 [1600 kB] Get: 4 http://deb.debian.org/debian trixie/main armhf python3-minimal armhf 3.11.8-1 [26.3 kB] Get: 5 http://deb.debian.org/debian trixie/main armhf media-types all 10.1.0 [26.9 kB] Get: 6 http://deb.debian.org/debian trixie/main armhf netbase all 6.4 [12.8 kB] Get: 7 http://deb.debian.org/debian trixie/main armhf tzdata all 2024a-4 [255 kB] Get: 8 http://deb.debian.org/debian trixie/main armhf readline-common all 8.2-4 [69.3 kB] Get: 9 http://deb.debian.org/debian trixie/main armhf libreadline8t64 armhf 8.2-4 [145 kB] Get: 10 http://deb.debian.org/debian trixie/main armhf libpython3.11-stdlib armhf 3.11.9-1 [1704 kB] Get: 11 http://deb.debian.org/debian trixie/main armhf python3.11 armhf 3.11.9-1 [602 kB] Get: 12 http://deb.debian.org/debian trixie/main armhf libpython3-stdlib armhf 3.11.8-1 [9332 B] Get: 13 http://deb.debian.org/debian trixie/main armhf python3 armhf 3.11.8-1 [27.4 kB] Get: 14 http://deb.debian.org/debian trixie/main armhf sensible-utils all 0.0.22 [22.4 kB] Get: 15 http://deb.debian.org/debian trixie/main armhf libmagic-mgc armhf 1:5.45-3 [314 kB] Get: 16 http://deb.debian.org/debian trixie/main armhf libmagic1t64 armhf 1:5.45-3 [98.1 kB] Get: 17 http://deb.debian.org/debian trixie/main armhf file armhf 1:5.45-3 [42.0 kB] Get: 18 http://deb.debian.org/debian trixie/main armhf gettext-base armhf 0.21-14+b1 [157 kB] Get: 19 http://deb.debian.org/debian trixie/main armhf libuchardet0 armhf 0.0.8-1+b1 [65.7 kB] Get: 20 http://deb.debian.org/debian trixie/main armhf groff-base armhf 1.23.0-4 [1090 kB] Get: 21 http://deb.debian.org/debian trixie/main armhf bsdextrautils armhf 2.40-8 [85.6 kB] Get: 22 http://deb.debian.org/debian trixie/main armhf libpipeline1 armhf 1.5.7-2 [33.3 kB] Get: 23 http://deb.debian.org/debian trixie/main armhf man-db armhf 2.12.1-1 [1375 kB] Get: 24 http://deb.debian.org/debian trixie/main armhf m4 armhf 1.4.19-4 [264 kB] Get: 25 http://deb.debian.org/debian trixie/main armhf autoconf all 2.71-3 [332 kB] Get: 26 http://deb.debian.org/debian trixie/main armhf autotools-dev all 20220109.1 [51.6 kB] Get: 27 http://deb.debian.org/debian trixie/main armhf automake all 1:1.16.5-1.3 [823 kB] Get: 28 http://deb.debian.org/debian trixie/main armhf autopoint all 0.21-14 [496 kB] Get: 29 http://deb.debian.org/debian trixie/main armhf libdebhelper-perl all 13.15.3 [88.0 kB] Get: 30 http://deb.debian.org/debian trixie/main armhf libtool all 2.4.7-7 [517 kB] Get: 31 http://deb.debian.org/debian trixie/main armhf dh-autoreconf all 20 [17.1 kB] Get: 32 http://deb.debian.org/debian trixie/main armhf libarchive-zip-perl all 1.68-1 [104 kB] Get: 33 http://deb.debian.org/debian trixie/main armhf libsub-override-perl all 0.10-1 [10.6 kB] Get: 34 http://deb.debian.org/debian trixie/main armhf libfile-stripnondeterminism-perl all 1.13.1-1 [19.4 kB] Get: 35 http://deb.debian.org/debian trixie/main armhf dh-strip-nondeterminism all 1.13.1-1 [8620 B] Get: 36 http://deb.debian.org/debian trixie/main armhf libelf1t64 armhf 0.191-1+b1 [183 kB] Get: 37 http://deb.debian.org/debian trixie/main armhf dwz armhf 0.15-1+b2 [106 kB] Get: 38 http://deb.debian.org/debian trixie/main armhf libicu72 armhf 72.1-4+b1 [9070 kB] Get: 39 http://deb.debian.org/debian trixie/main armhf libxml2 armhf 2.9.14+dfsg-1.3+b3 [598 kB] Get: 40 http://deb.debian.org/debian trixie/main armhf gettext armhf 0.21-14+b1 [1230 kB] Get: 41 http://deb.debian.org/debian trixie/main armhf intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 42 http://deb.debian.org/debian trixie/main armhf po-debconf all 1.0.21+nmu1 [248 kB] Get: 43 http://deb.debian.org/debian trixie/main armhf debhelper all 13.15.3 [901 kB] Get: 44 http://deb.debian.org/debian trixie/main armhf uuid-dev armhf 2.40-8 [42.5 kB] Get: 45 http://deb.debian.org/debian trixie/main armhf libblkid-dev armhf 2.40-8 [190 kB] Get: 46 http://deb.debian.org/debian trixie/main armhf libffi-dev armhf 3.4.6-1 [55.9 kB] Get: 47 http://deb.debian.org/debian trixie/main armhf libglib2.0-0t64 armhf 2.80.1-1 [1314 kB] Get: 48 http://deb.debian.org/debian trixie/main armhf libgirepository-2.0-0 armhf 2.80.1-1 [122 kB] Get: 49 http://deb.debian.org/debian trixie/main armhf libglib2.0-data all 2.80.1-1 [1266 kB] Get: 50 http://deb.debian.org/debian trixie/main armhf libglib2.0-bin armhf 2.80.1-1 [116 kB] Get: 51 http://deb.debian.org/debian trixie/main armhf python3-packaging all 24.0-1 [45.5 kB] Get: 52 http://deb.debian.org/debian trixie/main armhf libglib2.0-dev-bin armhf 2.80.1-1 [167 kB] Get: 53 http://deb.debian.org/debian trixie/main armhf libsepol-dev armhf 3.5-2+b1 [320 kB] Get: 54 http://deb.debian.org/debian trixie/main armhf libpcre2-16-0 armhf 10.42-4+b1 [212 kB] Get: 55 http://deb.debian.org/debian trixie/main armhf libpcre2-32-0 armhf 10.42-4+b1 [203 kB] Get: 56 http://deb.debian.org/debian trixie/main armhf libpcre2-posix3 armhf 10.42-4+b1 [55.3 kB] Get: 57 http://deb.debian.org/debian trixie/main armhf libpcre2-dev armhf 10.42-4+b1 [668 kB] Get: 58 http://deb.debian.org/debian trixie/main armhf libselinux1-dev armhf 3.5-2+b2 [152 kB] Get: 59 http://deb.debian.org/debian trixie/main armhf libmount-dev armhf 2.40-8 [25.9 kB] Get: 60 http://deb.debian.org/debian trixie/main armhf libsysprof-capture-4-dev armhf 46.0-1 [44.8 kB] Get: 61 http://deb.debian.org/debian trixie/main armhf libpkgconf3 armhf 1.8.1-1+b2 [31.9 kB] Get: 62 http://deb.debian.org/debian trixie/main armhf pkgconf-bin armhf 1.8.1-1+b2 [28.9 kB] Get: 63 http://deb.debian.org/debian trixie/main armhf pkgconf armhf 1.8.1-1+b2 [26.2 kB] Get: 64 http://deb.debian.org/debian trixie/main armhf zlib1g-dev armhf 1:1.3.dfsg-3.1 [904 kB] Get: 65 http://deb.debian.org/debian trixie/main armhf libglib2.0-dev armhf 2.80.1-1 [1616 kB] Get: 66 http://deb.debian.org/debian trixie/main armhf libsasl2-modules-db armhf 2.1.28+dfsg1-6 [18.0 kB] Get: 67 http://deb.debian.org/debian trixie/main armhf libsasl2-2 armhf 2.1.28+dfsg1-6 [50.1 kB] Get: 68 http://deb.debian.org/debian trixie/main armhf libldap-2.5-0 armhf 2.5.17+dfsg-1 [161 kB] Get: 69 http://deb.debian.org/debian trixie/main armhf libldap-dev armhf 2.5.17+dfsg-1 [280 kB] Get: 70 http://deb.debian.org/debian trixie/main armhf libncurses6 armhf 6.4+20240414-1 [81.8 kB] Get: 71 http://deb.debian.org/debian trixie/main armhf libncurses-dev armhf 6.4+20240414-1 [309 kB] Get: 72 http://deb.debian.org/debian trixie/main armhf libpopt0 armhf 1.19+dfsg-1+b1 [40.6 kB] Get: 73 http://deb.debian.org/debian trixie/main armhf libpopt-dev armhf 1.19+dfsg-1+b1 [44.0 kB] Get: 74 http://deb.debian.org/debian trixie/main armhf libreadline-dev armhf 8.2-4 [137 kB] Get: 75 http://deb.debian.org/debian trixie/main armhf libssl-dev armhf 3.2.1-3 [2348 kB] Get: 76 http://deb.debian.org/debian trixie/main armhf libsasl2-dev armhf 2.1.28+dfsg1-6 [215 kB] Get: 77 http://deb.debian.org/debian trixie/main armhf libxslt1.1 armhf 1.1.35-1+b1 [212 kB] Get: 78 http://deb.debian.org/debian trixie/main armhf xsltproc armhf 1.1.35-1+b1 [115 kB] Fetched 35.4 MB in 0s (78.7 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package libpython3.11-minimal:armhf. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19445 files and directories currently installed.) Preparing to unpack .../libpython3.11-minimal_3.11.9-1_armhf.deb ... Unpacking libpython3.11-minimal:armhf (3.11.9-1) ... Selecting previously unselected package libexpat1:armhf. Preparing to unpack .../libexpat1_2.6.2-1_armhf.deb ... Unpacking libexpat1:armhf (2.6.2-1) ... Selecting previously unselected package python3.11-minimal. Preparing to unpack .../python3.11-minimal_3.11.9-1_armhf.deb ... Unpacking python3.11-minimal (3.11.9-1) ... Setting up libpython3.11-minimal:armhf (3.11.9-1) ... Setting up libexpat1:armhf (2.6.2-1) ... Setting up python3.11-minimal (3.11.9-1) ... Selecting previously unselected package python3-minimal. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19761 files and directories currently installed.) Preparing to unpack .../0-python3-minimal_3.11.8-1_armhf.deb ... Unpacking python3-minimal (3.11.8-1) ... Selecting previously unselected package media-types. Preparing to unpack .../1-media-types_10.1.0_all.deb ... Unpacking media-types (10.1.0) ... Selecting previously unselected package netbase. Preparing to unpack .../2-netbase_6.4_all.deb ... Unpacking netbase (6.4) ... Selecting previously unselected package tzdata. Preparing to unpack .../3-tzdata_2024a-4_all.deb ... Unpacking tzdata (2024a-4) ... Selecting previously unselected package readline-common. Preparing to unpack .../4-readline-common_8.2-4_all.deb ... Unpacking readline-common (8.2-4) ... Selecting previously unselected package libreadline8t64:armhf. Preparing to unpack .../5-libreadline8t64_8.2-4_armhf.deb ... Adding 'diversion of /lib/arm-linux-gnueabihf/libhistory.so.8 to /lib/arm-linux-gnueabihf/libhistory.so.8.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/arm-linux-gnueabihf/libhistory.so.8.2 to /lib/arm-linux-gnueabihf/libhistory.so.8.2.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/arm-linux-gnueabihf/libreadline.so.8 to /lib/arm-linux-gnueabihf/libreadline.so.8.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/arm-linux-gnueabihf/libreadline.so.8.2 to /lib/arm-linux-gnueabihf/libreadline.so.8.2.usr-is-merged by libreadline8t64' Unpacking libreadline8t64:armhf (8.2-4) ... Selecting previously unselected package libpython3.11-stdlib:armhf. Preparing to unpack .../6-libpython3.11-stdlib_3.11.9-1_armhf.deb ... Unpacking libpython3.11-stdlib:armhf (3.11.9-1) ... Selecting previously unselected package python3.11. Preparing to unpack .../7-python3.11_3.11.9-1_armhf.deb ... Unpacking python3.11 (3.11.9-1) ... Selecting previously unselected package libpython3-stdlib:armhf. Preparing to unpack .../8-libpython3-stdlib_3.11.8-1_armhf.deb ... Unpacking libpython3-stdlib:armhf (3.11.8-1) ... Setting up python3-minimal (3.11.8-1) ... Selecting previously unselected package python3. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20753 files and directories currently installed.) Preparing to unpack .../00-python3_3.11.8-1_armhf.deb ... Unpacking python3 (3.11.8-1) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../01-sensible-utils_0.0.22_all.deb ... Unpacking sensible-utils (0.0.22) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../02-libmagic-mgc_1%3a5.45-3_armhf.deb ... Unpacking libmagic-mgc (1:5.45-3) ... Selecting previously unselected package libmagic1t64:armhf. Preparing to unpack .../03-libmagic1t64_1%3a5.45-3_armhf.deb ... Unpacking libmagic1t64:armhf (1:5.45-3) ... Selecting previously unselected package file. Preparing to unpack .../04-file_1%3a5.45-3_armhf.deb ... Unpacking file (1:5.45-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../05-gettext-base_0.21-14+b1_armhf.deb ... Unpacking gettext-base (0.21-14+b1) ... Selecting previously unselected package libuchardet0:armhf. Preparing to unpack .../06-libuchardet0_0.0.8-1+b1_armhf.deb ... Unpacking libuchardet0:armhf (0.0.8-1+b1) ... Selecting previously unselected package groff-base. Preparing to unpack .../07-groff-base_1.23.0-4_armhf.deb ... Unpacking groff-base (1.23.0-4) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../08-bsdextrautils_2.40-8_armhf.deb ... Unpacking bsdextrautils (2.40-8) ... Selecting previously unselected package libpipeline1:armhf. Preparing to unpack .../09-libpipeline1_1.5.7-2_armhf.deb ... Unpacking libpipeline1:armhf (1.5.7-2) ... Selecting previously unselected package man-db. Preparing to unpack .../10-man-db_2.12.1-1_armhf.deb ... Unpacking man-db (2.12.1-1) ... Selecting previously unselected package m4. Preparing to unpack .../11-m4_1.4.19-4_armhf.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../12-autoconf_2.71-3_all.deb ... Unpacking autoconf (2.71-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../13-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../14-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../15-autopoint_0.21-14_all.deb ... Unpacking autopoint (0.21-14) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../16-libdebhelper-perl_13.15.3_all.deb ... Unpacking libdebhelper-perl (13.15.3) ... Selecting previously unselected package libtool. Preparing to unpack .../17-libtool_2.4.7-7_all.deb ... Unpacking libtool (2.4.7-7) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../18-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../19-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libsub-override-perl. Preparing to unpack .../20-libsub-override-perl_0.10-1_all.deb ... Unpacking libsub-override-perl (0.10-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../21-libfile-stripnondeterminism-perl_1.13.1-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.13.1-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../22-dh-strip-nondeterminism_1.13.1-1_all.deb ... Unpacking dh-strip-nondeterminism (1.13.1-1) ... Selecting previously unselected package libelf1t64:armhf. Preparing to unpack .../23-libelf1t64_0.191-1+b1_armhf.deb ... Unpacking libelf1t64:armhf (0.191-1+b1) ... Selecting previously unselected package dwz. Preparing to unpack .../24-dwz_0.15-1+b2_armhf.deb ... Unpacking dwz (0.15-1+b2) ... Selecting previously unselected package libicu72:armhf. Preparing to unpack .../25-libicu72_72.1-4+b1_armhf.deb ... Unpacking libicu72:armhf (72.1-4+b1) ... Selecting previously unselected package libxml2:armhf. Preparing to unpack .../26-libxml2_2.9.14+dfsg-1.3+b3_armhf.deb ... Unpacking libxml2:armhf (2.9.14+dfsg-1.3+b3) ... Selecting previously unselected package gettext. Preparing to unpack .../27-gettext_0.21-14+b1_armhf.deb ... Unpacking gettext (0.21-14+b1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../28-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../29-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../30-debhelper_13.15.3_all.deb ... Unpacking debhelper (13.15.3) ... Selecting previously unselected package uuid-dev:armhf. Preparing to unpack .../31-uuid-dev_2.40-8_armhf.deb ... Unpacking uuid-dev:armhf (2.40-8) ... Selecting previously unselected package libblkid-dev:armhf. Preparing to unpack .../32-libblkid-dev_2.40-8_armhf.deb ... Unpacking libblkid-dev:armhf (2.40-8) ... Selecting previously unselected package libffi-dev:armhf. Preparing to unpack .../33-libffi-dev_3.4.6-1_armhf.deb ... Unpacking libffi-dev:armhf (3.4.6-1) ... Selecting previously unselected package libglib2.0-0t64:armhf. Preparing to unpack .../34-libglib2.0-0t64_2.80.1-1_armhf.deb ... Unpacking libglib2.0-0t64:armhf (2.80.1-1) ... Selecting previously unselected package libgirepository-2.0-0:armhf. Preparing to unpack .../35-libgirepository-2.0-0_2.80.1-1_armhf.deb ... Unpacking libgirepository-2.0-0:armhf (2.80.1-1) ... Selecting previously unselected package libglib2.0-data. Preparing to unpack .../36-libglib2.0-data_2.80.1-1_all.deb ... Unpacking libglib2.0-data (2.80.1-1) ... Selecting previously unselected package libglib2.0-bin. Preparing to unpack .../37-libglib2.0-bin_2.80.1-1_armhf.deb ... Unpacking libglib2.0-bin (2.80.1-1) ... Selecting previously unselected package python3-packaging. Preparing to unpack .../38-python3-packaging_24.0-1_all.deb ... Unpacking python3-packaging (24.0-1) ... Selecting previously unselected package libglib2.0-dev-bin. Preparing to unpack .../39-libglib2.0-dev-bin_2.80.1-1_armhf.deb ... Unpacking libglib2.0-dev-bin (2.80.1-1) ... Selecting previously unselected package libsepol-dev:armhf. Preparing to unpack .../40-libsepol-dev_3.5-2+b1_armhf.deb ... Unpacking libsepol-dev:armhf (3.5-2+b1) ... Selecting previously unselected package libpcre2-16-0:armhf. Preparing to unpack .../41-libpcre2-16-0_10.42-4+b1_armhf.deb ... Unpacking libpcre2-16-0:armhf (10.42-4+b1) ... Selecting previously unselected package libpcre2-32-0:armhf. Preparing to unpack .../42-libpcre2-32-0_10.42-4+b1_armhf.deb ... Unpacking libpcre2-32-0:armhf (10.42-4+b1) ... Selecting previously unselected package libpcre2-posix3:armhf. Preparing to unpack .../43-libpcre2-posix3_10.42-4+b1_armhf.deb ... Unpacking libpcre2-posix3:armhf (10.42-4+b1) ... Selecting previously unselected package libpcre2-dev:armhf. Preparing to unpack .../44-libpcre2-dev_10.42-4+b1_armhf.deb ... Unpacking libpcre2-dev:armhf (10.42-4+b1) ... Selecting previously unselected package libselinux1-dev:armhf. Preparing to unpack .../45-libselinux1-dev_3.5-2+b2_armhf.deb ... Unpacking libselinux1-dev:armhf (3.5-2+b2) ... Selecting previously unselected package libmount-dev:armhf. Preparing to unpack .../46-libmount-dev_2.40-8_armhf.deb ... Unpacking libmount-dev:armhf (2.40-8) ... Selecting previously unselected package libsysprof-capture-4-dev:armhf. Preparing to unpack .../47-libsysprof-capture-4-dev_46.0-1_armhf.deb ... Unpacking libsysprof-capture-4-dev:armhf (46.0-1) ... Selecting previously unselected package libpkgconf3:armhf. Preparing to unpack .../48-libpkgconf3_1.8.1-1+b2_armhf.deb ... Unpacking libpkgconf3:armhf (1.8.1-1+b2) ... Selecting previously unselected package pkgconf-bin. Preparing to unpack .../49-pkgconf-bin_1.8.1-1+b2_armhf.deb ... Unpacking pkgconf-bin (1.8.1-1+b2) ... Selecting previously unselected package pkgconf:armhf. Preparing to unpack .../50-pkgconf_1.8.1-1+b2_armhf.deb ... Unpacking pkgconf:armhf (1.8.1-1+b2) ... Selecting previously unselected package zlib1g-dev:armhf. Preparing to unpack .../51-zlib1g-dev_1%3a1.3.dfsg-3.1_armhf.deb ... Unpacking zlib1g-dev:armhf (1:1.3.dfsg-3.1) ... Selecting previously unselected package libglib2.0-dev:armhf. Preparing to unpack .../52-libglib2.0-dev_2.80.1-1_armhf.deb ... Unpacking libglib2.0-dev:armhf (2.80.1-1) ... Selecting previously unselected package libsasl2-modules-db:armhf. Preparing to unpack .../53-libsasl2-modules-db_2.1.28+dfsg1-6_armhf.deb ... Unpacking libsasl2-modules-db:armhf (2.1.28+dfsg1-6) ... Selecting previously unselected package libsasl2-2:armhf. Preparing to unpack .../54-libsasl2-2_2.1.28+dfsg1-6_armhf.deb ... Unpacking libsasl2-2:armhf (2.1.28+dfsg1-6) ... Selecting previously unselected package libldap-2.5-0:armhf. Preparing to unpack .../55-libldap-2.5-0_2.5.17+dfsg-1_armhf.deb ... Unpacking libldap-2.5-0:armhf (2.5.17+dfsg-1) ... Selecting previously unselected package libldap-dev:armhf. Preparing to unpack .../56-libldap-dev_2.5.17+dfsg-1_armhf.deb ... Unpacking libldap-dev:armhf (2.5.17+dfsg-1) ... Selecting previously unselected package libncurses6:armhf. Preparing to unpack .../57-libncurses6_6.4+20240414-1_armhf.deb ... Unpacking libncurses6:armhf (6.4+20240414-1) ... Selecting previously unselected package libncurses-dev:armhf. Preparing to unpack .../58-libncurses-dev_6.4+20240414-1_armhf.deb ... Unpacking libncurses-dev:armhf (6.4+20240414-1) ... Selecting previously unselected package libpopt0:armhf. Preparing to unpack .../59-libpopt0_1.19+dfsg-1+b1_armhf.deb ... Unpacking libpopt0:armhf (1.19+dfsg-1+b1) ... Selecting previously unselected package libpopt-dev:armhf. Preparing to unpack .../60-libpopt-dev_1.19+dfsg-1+b1_armhf.deb ... Unpacking libpopt-dev:armhf (1.19+dfsg-1+b1) ... Selecting previously unselected package libreadline-dev:armhf. Preparing to unpack .../61-libreadline-dev_8.2-4_armhf.deb ... Unpacking libreadline-dev:armhf (8.2-4) ... Selecting previously unselected package libssl-dev:armhf. Preparing to unpack .../62-libssl-dev_3.2.1-3_armhf.deb ... Unpacking libssl-dev:armhf (3.2.1-3) ... Selecting previously unselected package libsasl2-dev. Preparing to unpack .../63-libsasl2-dev_2.1.28+dfsg1-6_armhf.deb ... Unpacking libsasl2-dev (2.1.28+dfsg1-6) ... Selecting previously unselected package libxslt1.1:armhf. Preparing to unpack .../64-libxslt1.1_1.1.35-1+b1_armhf.deb ... Unpacking libxslt1.1:armhf (1.1.35-1+b1) ... Selecting previously unselected package xsltproc. Preparing to unpack .../65-xsltproc_1.1.35-1+b1_armhf.deb ... Unpacking xsltproc (1.1.35-1+b1) ... Setting up media-types (10.1.0) ... Setting up libpipeline1:armhf (1.5.7-2) ... Setting up libicu72:armhf (72.1-4+b1) ... Setting up bsdextrautils (2.40-8) ... Setting up libmagic-mgc (1:5.45-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.15.3) ... Setting up libmagic1t64:armhf (1:5.45-3) ... Setting up gettext-base (0.21-14+b1) ... Setting up m4 (1.4.19-4) ... Setting up file (1:5.45-3) ... Setting up libffi-dev:armhf (3.4.6-1) ... Setting up libpcre2-16-0:armhf (10.42-4+b1) ... Setting up libelf1t64:armhf (0.191-1+b1) ... Setting up libsasl2-modules-db:armhf (2.1.28+dfsg1-6) ... Setting up tzdata (2024a-4) ... Current default time zone: 'Etc/UTC' Local time is now: Thu May 9 17:35:16 UTC 2024. Universal Time is now: Thu May 9 17:35:16 UTC 2024. Run 'dpkg-reconfigure tzdata' if you wish to change it. Setting up libsysprof-capture-4-dev:armhf (46.0-1) ... Setting up autotools-dev (20220109.1) ... Setting up libpcre2-32-0:armhf (10.42-4+b1) ... Setting up libglib2.0-0t64:armhf (2.80.1-1) ... No schema files found: doing nothing. Setting up libglib2.0-data (2.80.1-1) ... Setting up libpkgconf3:armhf (1.8.1-1+b2) ... Setting up uuid-dev:armhf (2.40-8) ... Setting up libncurses6:armhf (6.4+20240414-1) ... Setting up libssl-dev:armhf (3.2.1-3) ... Setting up autopoint (0.21-14) ... Setting up libsepol-dev:armhf (3.5-2+b1) ... Setting up pkgconf-bin (1.8.1-1+b2) ... Setting up libsasl2-2:armhf (2.1.28+dfsg1-6) ... Setting up autoconf (2.71-3) ... Setting up zlib1g-dev:armhf (1:1.3.dfsg-3.1) ... Setting up libpcre2-posix3:armhf (10.42-4+b1) ... Setting up dwz (0.15-1+b2) ... Setting up sensible-utils (0.0.22) ... Setting up libuchardet0:armhf (0.0.8-1+b1) ... Setting up libsub-override-perl (0.10-1) ... Setting up netbase (6.4) ... Setting up readline-common (8.2-4) ... Setting up libxml2:armhf (2.9.14+dfsg-1.3+b3) ... Setting up libpopt0:armhf (1.19+dfsg-1+b1) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.13.1-1) ... Setting up libblkid-dev:armhf (2.40-8) ... Setting up libncurses-dev:armhf (6.4+20240414-1) ... Setting up gettext (0.21-14+b1) ... Setting up libpcre2-dev:armhf (10.42-4+b1) ... Setting up libtool (2.4.7-7) ... Setting up libgirepository-2.0-0:armhf (2.80.1-1) ... Setting up libselinux1-dev:armhf (3.5-2+b2) ... Setting up libglib2.0-bin (2.80.1-1) ... Setting up libldap-2.5-0:armhf (2.5.17+dfsg-1) ... Setting up pkgconf:armhf (1.8.1-1+b2) ... Setting up libpopt-dev:armhf (1.19+dfsg-1+b1) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up libsasl2-dev (2.1.28+dfsg1-6) ... Setting up libldap-dev:armhf (2.5.17+dfsg-1) ... Setting up libreadline8t64:armhf (8.2-4) ... Setting up dh-strip-nondeterminism (1.13.1-1) ... Setting up groff-base (1.23.0-4) ... Setting up libxslt1.1:armhf (1.1.35-1+b1) ... Setting up libmount-dev:armhf (2.40-8) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up libpython3.11-stdlib:armhf (3.11.9-1) ... Setting up xsltproc (1.1.35-1+b1) ... Setting up libreadline-dev:armhf (8.2-4) ... Setting up man-db (2.12.1-1) ... Not building database; man-db/auto-update is not 'true'. Setting up libpython3-stdlib:armhf (3.11.8-1) ... Setting up python3.11 (3.11.9-1) ... Setting up debhelper (13.15.3) ... Setting up python3 (3.11.8-1) ... Setting up python3-packaging (24.0-1) ... Setting up libglib2.0-dev-bin (2.80.1-1) ... Setting up libglib2.0-dev:armhf (2.80.1-1) ... Processing triggers for libc-bin (2.38-7) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.33-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/reproducible-path/ldapvi-1.7/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../ldapvi_1.7-11_source.changes dpkg-buildpackage: info: source package ldapvi dpkg-buildpackage: info: source version 1.7-11 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Boyuan Yang dpkg-source --before-build . dpkg-buildpackage: info: host architecture armhf fakeroot debian/rules clean dh clean dh: warning: Compatibility levels before 10 are deprecated (level 9 in use) debian/rules override_dh_clean make[1]: Entering directory '/build/reproducible-path/ldapvi-1.7' rm manual/manual.html rm: cannot remove 'manual/manual.html': No such file or directory make[1]: [debian/rules:11: override_dh_clean] Error 1 (ignored) cp -a configure configure.save dh_clean dh_clean: warning: Compatibility levels before 10 are deprecated (level 9 in use) mv configure.save configure make[1]: Leaving directory '/build/reproducible-path/ldapvi-1.7' debian/rules build dh build dh: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_update_autotools_config debian/rules override_dh_auto_configure make[1]: Entering directory '/build/reproducible-path/ldapvi-1.7' dh_auto_configure -- --with-libcrypto=none dh_auto_configure: warning: Compatibility levels before 10 are deprecated (level 9 in use) ./configure --build=arm-linux-gnueabihf --prefix=/usr --includedir=\${prefix}/include --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info --sysconfdir=/etc --localstatedir=/var --disable-option-checking --disable-silent-rules --libdir=\${prefix}/lib/arm-linux-gnueabihf --libexecdir=\${prefix}/lib/arm-linux-gnueabihf --disable-maintainer-mode --disable-dependency-tracking --with-libcrypto=none checking for a BSD-compatible install... /usr/bin/install -c checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking for mkdtemp... yes checking for on_exit... yes checking for main in -lsocket... no checking for main in -lresolv... yes checking for main in -llber... yes checking for main in -lldap... yes checking for ldap_initialize in -lldap... yes checking for ldap_bv2dn_x in -lldap... yes checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking sasl/sasl.h usability... yes checking sasl/sasl.h presence... yes checking for sasl/sasl.h... yes checking for library containing tigetstr... -lcurses checking curses.h usability... yes checking curses.h presence... yes checking for curses.h... yes checking for poptGetContext in -lpopt... yes checking for readline in -lreadline... yes checking for pkg-config... /usr/bin/pkg-config checking for main in -lglib-2.0... yes checking for SHA1... no checking for MD5... no checking for RAND_pseudo_bytes... no checking for main in -lcrypt... yes configure: creating ./config.status config.status: creating GNUmakefile config.status: WARNING: GNUmakefile.in seems to ignore the --datarootdir setting config.status: creating config.h cd manual && /usr/bin/make manual.html make[2]: Entering directory '/build/reproducible-path/ldapvi-1.7/manual' xsltproc html.xsl manual.xml >manual.html make[2]: Leaving directory '/build/reproducible-path/ldapvi-1.7/manual' make[1]: Leaving directory '/build/reproducible-path/ldapvi-1.7' dh_auto_build dh_auto_build: warning: Compatibility levels before 10 are deprecated (level 9 in use) make -j1 make[1]: Entering directory '/build/reproducible-path/ldapvi-1.7' gcc -c -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -I/usr/include/sysprof-6 -pthread -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/ldapvi-1.7=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -o ldapvi.o ldapvi.c ldapvi.c: In function 'save_ldif': ldapvi.c:766:20: warning: Deprecated pre-processor symbol: replace with "g_string_append_printf" 766 | g_string_sprintfa(name, "-%d.ldif", getpid()); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ldapvi.c: In function 'write_config': ldapvi.c:1236:43: warning: format '%s' expects argument of type 'char *', but argument 3 has type 'gpointer' {aka 'void *'} [-Wformat=] 1236 | fprintf(f, "BASE %s\n", g_ptr_array_index(basedns, i)); | ~^ | | | char * | %p ldapvi.c: In function 'copy_sasl_output': ldapvi.c:1468:37: warning: 'return' with no value, in function returning non-void 1468 | if (lstat(sasl, &st) == -1) return; | ^~~~~~ ldapvi.c:1460:1: note: declared here 1460 | copy_sasl_output(FILE *out, char *sasl) | ^~~~~~~~~~~~~~~~ ldapvi.c: In function 'ensure_tmp_directory': ldapvi.c:579:9: warning: ignoring return value of 'mkdtemp' declared with attribute 'warn_unused_result' [-Wunused-result] 579 | mkdtemp(dir); | ^~~~~~~~~~~~ gcc -c -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -I/usr/include/sysprof-6 -pthread -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/ldapvi-1.7=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -o data.o data.c gcc -c -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -I/usr/include/sysprof-6 -pthread -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/ldapvi-1.7=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -o diff.o diff.c gcc -c -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -I/usr/include/sysprof-6 -pthread -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/ldapvi-1.7=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -o error.o error.c gcc -c -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -I/usr/include/sysprof-6 -pthread -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/ldapvi-1.7=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -o misc.o misc.c misc.c: In function 'edit': misc.c:177:25: warning: missing sentinel in function call [-Wformat=] 177 | execlp(vi, vi, buf, pathname, 0); | ^~~~~~ misc.c:179:25: warning: missing sentinel in function call [-Wformat=] 179 | execlp(vi, vi, pathname, 0); | ^~~~~~ misc.c: In function 'view': misc.c:220:17: warning: missing sentinel in function call [-Wformat=] 220 | execlp(pg, pg, pathname, 0); | ^~~~~~ misc.c: In function 'pipeview': misc.c:252:17: warning: missing sentinel in function call [-Wformat=] 252 | execlp(pg, pg, 0); | ^~~~~~ misc.c: In function 'xalloc': misc.c:404:17: warning: ignoring return value of 'write' declared with attribute 'warn_unused_result' [-Wunused-result] 404 | write(2, "\nmalloc error\n", sizeof("\nmalloc error\n") - 1); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ misc.c: In function 'xdup': misc.c:418:17: warning: ignoring return value of 'write' declared with attribute 'warn_unused_result' [-Wunused-result] 418 | write(2, "\nstrdup error\n", sizeof("\nstrdup error\n") - 1); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ misc.c: In function 'fdcp': misc.c:53:21: warning: 'write' specified size 4294967295 exceeds maximum object size 2147483647 [-Wstringop-overflow=] 53 | if (write(fddst, buf, n) != n) syserr(); | ^~~~~~~~~~~~~~~~~~~~ In file included from common.h:39, from misc.c:20: /usr/include/unistd.h:378:16: note: in a call to function 'write' declared with attribute 'access (read_only, 2, 3)' 378 | extern ssize_t write (int __fd, const void *__buf, size_t __n) __wur | ^~~~~ gcc -c -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -I/usr/include/sysprof-6 -pthread -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/ldapvi-1.7=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -o parse.o parse.c gcc -c -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -I/usr/include/sysprof-6 -pthread -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/ldapvi-1.7=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -o port.o port.c port.c:42:2: warning: #warning Compiling without cryptographic routines. [-Wcpp] 42 | #warning Compiling without cryptographic routines. | ^~~~~~~ gcc -c -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -I/usr/include/sysprof-6 -pthread -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/ldapvi-1.7=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -o print.o print.c gcc -c -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -I/usr/include/sysprof-6 -pthread -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/ldapvi-1.7=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -o search.o search.c gcc -c -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -I/usr/include/sysprof-6 -pthread -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/ldapvi-1.7=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -o base64.o base64.c gcc -c -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -I/usr/include/sysprof-6 -pthread -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/ldapvi-1.7=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -o arguments.o arguments.c arguments.c: In function 'usage': arguments.c:186:17: warning: ignoring return value of 'write' declared with attribute 'warn_unused_result' [-Wunused-result] 186 | write(fd, USAGE, strlen(USAGE)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ gcc -c -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -I/usr/include/sysprof-6 -pthread -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/ldapvi-1.7=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -o parseldif.o parseldif.c gcc -c -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -I/usr/include/sysprof-6 -pthread -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/ldapvi-1.7=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -o sasl.o sasl.c gcc -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -I/usr/include/sysprof-6 -pthread -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/ldapvi-1.7=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -o ldapvi ldapvi.o data.o diff.o error.o misc.o parse.o port.o print.o search.o base64.o arguments.o parseldif.o schema.c sasl.o -Wl,-z,relro -lcrypt -lglib-2.0 -lreadline -lpopt -lcurses -lldap -llber -lresolv make[1]: Leaving directory '/build/reproducible-path/ldapvi-1.7' dh_auto_test dh_auto_test: warning: Compatibility levels before 10 are deprecated (level 9 in use) fakeroot debian/rules binary dh binary dh: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_testroot dh_prep debian/rules override_dh_auto_install make[1]: Entering directory '/build/reproducible-path/ldapvi-1.7' # NOP make[1]: Leaving directory '/build/reproducible-path/ldapvi-1.7' dh_install dh_install: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_installdocs dh_installdocs: warning: Compatibility levels before 10 are deprecated (level 9 in use) debian/rules override_dh_installchangelogs make[1]: Entering directory '/build/reproducible-path/ldapvi-1.7' dh_installchangelogs NEWS make[1]: Leaving directory '/build/reproducible-path/ldapvi-1.7' dh_installman dh_installman: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_perl dh_link dh_strip_nondeterminism dh_compress dh_compress: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_fixperms dh_missing dh_missing: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_strip dh_strip: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_makeshlibs dh_makeshlibs: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_shlibdeps dh_shlibdeps: warning: Compatibility levels before 10 are deprecated (level 9 in use) dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libreadline8t64 from: /lib/arm-linux-gnueabihf/libreadline.so.8 dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libreadline8t64 to: /lib/arm-linux-gnueabihf/libreadline.so.8.usr-is-merged dh_installdeb dh_installdeb: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_gencontrol dh_gencontrol: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_md5sums dh_builddeb dpkg-deb: building package 'ldapvi-dbgsym' in '../ldapvi-dbgsym_1.7-11_armhf.deb'. dpkg-deb: building package 'ldapvi' in '../ldapvi_1.7-11_armhf.deb'. dpkg-genbuildinfo --build=binary -O../ldapvi_1.7-11_armhf.buildinfo dpkg-genchanges --build=binary -O../ldapvi_1.7-11_armhf.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/29065 and its subdirectories I: Current time: Thu May 9 05:35:56 -12 2024 I: pbuilder-time-stamp: 1715276156 Thu May 9 17:36:03 UTC 2024 I: 1st build successful. Starting 2nd build on remote node ff64a-armhf-rb.debian.net. Thu May 9 17:36:03 UTC 2024 I: Preparing to do remote build '2' on ff64a-armhf-rb.debian.net. Thu May 9 17:42:02 UTC 2024 I: Deleting $TMPDIR on ff64a-armhf-rb.debian.net. Thu May 9 17:42:05 UTC 2024 I: ldapvi_1.7-11_armhf.changes: Format: 1.8 Date: Fri, 26 Apr 2024 11:15:30 -0400 Source: ldapvi Binary: ldapvi ldapvi-dbgsym Architecture: armhf Version: 1.7-11 Distribution: unstable Urgency: medium Maintainer: Rhonda D'Vine Changed-By: Boyuan Yang Description: ldapvi - perform an LDAP search and update results using a text editor Closes: 1066357 Changes: ldapvi (1.7-11) unstable; urgency=medium . * Non-maintainer upload. * debian/control: Avoid using transitional package names. * debian/control: Add missing dependency sensible-utils (lintian). * debian/patches/07,08: Add patch to fix FTBFS caused by Werror=implicit-function-declaration. (Closes: #1066357) Checksums-Sha1: 75da055cc61fcfca1fefea9654de12297d4ca718 160256 ldapvi-dbgsym_1.7-11_armhf.deb 968878a485afe52fd98b197c8bb193970313b6e6 6644 ldapvi_1.7-11_armhf.buildinfo 33f313e5822c2d08ff992caa83c17e33ca2e9f8f 62876 ldapvi_1.7-11_armhf.deb Checksums-Sha256: e4ff3c1f8e58dd5aeaf77ef080bf6063b617e89181737ea25d7b74e09e84b850 160256 ldapvi-dbgsym_1.7-11_armhf.deb adaa618d969fc41e0cf58ff2a81af763b32e3546512f422eabb1caef656229ee 6644 ldapvi_1.7-11_armhf.buildinfo e18edce368ffebebb96fc98b85728aaa6e5b27fb8f01950721777861da5b9b71 62876 ldapvi_1.7-11_armhf.deb Files: 767af902828fb269590562883956967f 160256 debug optional ldapvi-dbgsym_1.7-11_armhf.deb 0faf9c88aa90e47712aa1c704578d55e 6644 text optional ldapvi_1.7-11_armhf.buildinfo b8f26f4c25ab95c74d02370870f03711 62876 text optional ldapvi_1.7-11_armhf.deb Thu May 9 17:42:06 UTC 2024 I: diffoscope 265 will be used to compare the two builds: Running as unit: rb-diffoscope-armhf_14-4486.service # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.rKILYNIl/ldapvi_1.7-11.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.rKILYNIl/ldapvi_1.7-11.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.rKILYNIl/ldapvi_1.7-11.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.rKILYNIl/b1/ldapvi_1.7-11_armhf.changes /srv/reproducible-results/rbuild-debian/r-b-build.rKILYNIl/b2/ldapvi_1.7-11_armhf.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.504s) 0.504s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.032s) 0.032s 12 calls diffoscope.comparators.binary.FilesystemFile ## specialize (total time: 0.000s) 0.000s 1 call specialize Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 1.019s CPU time consumed: 942ms Thu May 9 17:42:09 UTC 2024 I: diffoscope 265 found no differences in the changes files, and a .buildinfo file also exists. Thu May 9 17:42:09 UTC 2024 I: ldapvi from trixie built successfully and reproducibly on armhf. Thu May 9 17:42:10 UTC 2024 I: Submitting .buildinfo files to external archives: Thu May 9 17:42:10 UTC 2024 I: Submitting 8.0K b1/ldapvi_1.7-11_armhf.buildinfo.asc Thu May 9 17:42:11 UTC 2024 I: Submitting 8.0K b2/ldapvi_1.7-11_armhf.buildinfo.asc Thu May 9 17:42:12 UTC 2024 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Thu May 9 17:42:12 UTC 2024 I: Done submitting .buildinfo files. Thu May 9 17:42:12 UTC 2024 I: Removing signed ldapvi_1.7-11_armhf.buildinfo.asc files: removed './b1/ldapvi_1.7-11_armhf.buildinfo.asc' removed './b2/ldapvi_1.7-11_armhf.buildinfo.asc'