Sun May 5 11:01:18 UTC 2024 I: starting to build idevicerestore/trixie/armhf on jenkins on '2024-05-05 11:00' Sun May 5 11:01:18 UTC 2024 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/armhf_5/5187/console.log Sun May 5 11:01:18 UTC 2024 I: Downloading source for trixie/idevicerestore=1.0.0-3 --2024-05-05 11:01:18-- http://deb.debian.org/debian/pool/main/i/idevicerestore/idevicerestore_1.0.0-3.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 1768 (1.7K) [text/prs.lines.tag] Saving to: ‘idevicerestore_1.0.0-3.dsc’ 0K . 100% 273M=0s 2024-05-05 11:01:18 (273 MB/s) - ‘idevicerestore_1.0.0-3.dsc’ saved [1768/1768] Sun May 5 11:01:18 UTC 2024 I: idevicerestore_1.0.0-3.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: idevicerestore Binary: idevicerestore Architecture: any Version: 1.0.0-3 Maintainer: gtkpod Maintainers Uploaders: Yves-Alexis Perez Homepage: https://www.libimobiledevice.org/ Standards-Version: 4.5.0 Vcs-Browser: https://salsa.debian.org/imobiledevice-team/idevicerestore Vcs-Git: https://salsa.debian.org/imobiledevice-team/idevicerestore.git Build-Depends: autoconf-archive, debhelper-compat (= 12), libcurl4-gnutls-dev, libimobiledevice-dev, libirecovery-1.0-dev, libusb-1.0-0-dev, libzip-dev, pkg-config Package-List: idevicerestore deb utils optional arch=any Checksums-Sha1: 8e5ae591bcbdf133a67bc5b71a2d1b38a6b2ae53 106872 idevicerestore_1.0.0.orig.tar.gz c17a20f7c85a7f452bd1819bdff01d64ad8ebe22 3608 idevicerestore_1.0.0-3.debian.tar.xz Checksums-Sha256: 2c83c60b8b7027b3730d63c3ebbdede5b0b43bd5ab1e54caaa52b3b1268881e5 106872 idevicerestore_1.0.0.orig.tar.gz 731095d4e604188542061559519956a6f0c033aad1483bd57051ade66e718d9a 3608 idevicerestore_1.0.0-3.debian.tar.xz Files: a3066844608ca0e05fac80e0ccca9aa1 106872 idevicerestore_1.0.0.orig.tar.gz b7eeea16e3b6bfac3f99326f46343a54 3608 idevicerestore_1.0.0-3.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQEzBAEBCgAdFiEE8vi34Qgfo83x35gF3rYcyPpXRFsFAl+RTXIACgkQ3rYcyPpX RFvH5AgAm1/mRtd8ykmDdHWGDy2EYDleIs3cOfx+9zH7hiOw4qdOvHIzXtZfkDb5 m7Ixj60M0G/7qqlJhdFOvtR70LAmrxHDUKwnfUbVKRrzucecnT3/mXtYuvUn3tAE De5mwOm5FjiBterwVFN91JFv7OXOuiJEU95I1q4bU9+isPfyr/EzloijKU8HYCh/ x/uCdrjrOA6ZOPFCIDOxcXg12/ekpAF1QtGDcvV0nM5iQInpxLdc9VOamwoIkufC +Av2Lclsq70o5+Ob/dr30K2kQ04w21LLzD1u3FfI3oH38DBxMgfb1Ig0NV6KXLDQ GpKcq+ITUcdUBMwQLAM4J3pEYzt90A== =sam9 -----END PGP SIGNATURE----- Sun May 5 11:01:18 UTC 2024 I: Checking whether the package is not for us Sun May 5 11:01:18 UTC 2024 I: Starting 1st build on remote node virt64a-armhf-rb.debian.net. Sun May 5 11:01:18 UTC 2024 I: Preparing to do remote build '1' on virt64a-armhf-rb.debian.net. Sun May 5 11:06:12 UTC 2024 I: Deleting $TMPDIR on virt64a-armhf-rb.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Sat May 4 23:01:24 -12 2024 I: pbuilder-time-stamp: 1714906884 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [idevicerestore_1.0.0-3.dsc] I: copying [./idevicerestore_1.0.0.orig.tar.gz] I: copying [./idevicerestore_1.0.0-3.debian.tar.xz] I: Extracting source gpgv: Signature made Thu Oct 22 09:14:26 2020 gpgv: using RSA key F2F8B7E1081FA3CDF1DF9805DEB61CC8FA57445B gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./idevicerestore_1.0.0-3.dsc: no acceptable signature found dpkg-source: info: extracting idevicerestore in idevicerestore-1.0.0 dpkg-source: info: unpacking idevicerestore_1.0.0.orig.tar.gz dpkg-source: info: unpacking idevicerestore_1.0.0-3.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying 0001-configure.ac-fix-link-against-pthread.patch I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/30491/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='armhf' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=3 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='armhf' IFS=' ' INVOCATION_ID='8fa55737cb6149a8bd1e97023c73546f' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='30491' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.OXKghoSF/pbuilderrc_rS8T --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.OXKghoSF/b1 --logfile b1/build.log idevicerestore_1.0.0-3.dsc' SUDO_GID='114' SUDO_UID='108' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://10.0.0.15:3142/' I: uname -a Linux virt64a 6.1.0-20-arm64 #1 SMP Debian 6.1.85-1 (2024-04-11) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 May 2 11:25 /bin -> usr/bin I: user script /srv/workspace/pbuilder/30491/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: armhf Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: autoconf-archive, debhelper-compat (= 12), libcurl4-gnutls-dev, libimobiledevice-dev, libirecovery-1.0-dev, libusb-1.0-0-dev, libzip-dev, pkg-config dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19441 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on autoconf-archive; however: Package autoconf-archive is not installed. pbuilder-satisfydepends-dummy depends on debhelper-compat (= 12); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libcurl4-gnutls-dev; however: Package libcurl4-gnutls-dev is not installed. pbuilder-satisfydepends-dummy depends on libimobiledevice-dev; however: Package libimobiledevice-dev is not installed. pbuilder-satisfydepends-dummy depends on libirecovery-1.0-dev; however: Package libirecovery-1.0-dev is not installed. pbuilder-satisfydepends-dummy depends on libusb-1.0-0-dev; however: Package libusb-1.0-0-dev is not installed. pbuilder-satisfydepends-dummy depends on libzip-dev; however: Package libzip-dev is not installed. pbuilder-satisfydepends-dummy depends on pkg-config; however: Package pkg-config is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} autoconf-archive{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libblkid-dev{a} libbrotli1{a} libcom-err2{a} libcurl3t64-gnutls{a} libcurl4-gnutls-dev{a} libdebhelper-perl{a} libelf1t64{a} libexpat1{a} libffi-dev{a} libfile-stripnondeterminism-perl{a} libgcrypt20-dev{a} libglib2.0-0t64{a} libglib2.0-bin{a} libglib2.0-data{a} libglib2.0-dev{a} libglib2.0-dev-bin{a} libgpg-error-dev{a} libgssapi-krb5-2{a} libicu72{a} libimobiledevice-dev{a} libimobiledevice6{a} libirecovery-1.0-3{a} libirecovery-1.0-dev{a} libirecovery-common{a} libk5crypto3{a} libkeyutils1{a} libkrb5-3{a} libkrb5support0{a} libmagic-mgc{a} libmagic1t64{a} libmount-dev{a} libnghttp2-14{a} libpcre2-16-0{a} libpcre2-32-0{a} libpcre2-dev{a} libpcre2-posix3{a} libpipeline1{a} libpkgconf3{a} libplist-dev{a} libplist3{a} libpsl5t64{a} libpython3-stdlib{a} libpython3.11-minimal{a} libpython3.11-stdlib{a} libreadline8t64{a} librtmp1{a} libselinux1-dev{a} libsepol-dev{a} libssh2-1t64{a} libssl-dev{a} libsub-override-perl{a} libtasn1-6-dev{a} libtool{a} libuchardet0{a} libusb-1.0-0{a} libusb-1.0-0-dev{a} libusbmuxd-dev{a} libusbmuxd6{a} libxml2{a} libzip-dev{a} libzip4t64{a} m4{a} man-db{a} media-types{a} netbase{a} pkgconf{a} pkgconf-bin{a} po-debconf{a} python3{a} python3-minimal{a} python3-packaging{a} python3.11{a} python3.11-minimal{a} readline-common{a} sensible-utils{a} tzdata{a} uuid-dev{a} zlib1g-dev{a} The following packages are RECOMMENDED but will NOT be installed: ca-certificates curl idevicerestore krb5-locales libarchive-cpio-perl libltdl-dev libmail-sendmail-perl libtasn1-doc libusb-1.0-doc lynx publicsuffix shared-mime-info usbmuxd wget xdg-user-dirs 0 packages upgraded, 94 newly installed, 0 to remove and 0 not upgraded. Need to get 37.7 MB of archives. After unpacking 143 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main armhf autoconf-archive all 20220903-3 [775 kB] Get: 2 http://deb.debian.org/debian trixie/main armhf libpython3.11-minimal armhf 3.11.9-1 [805 kB] Get: 3 http://deb.debian.org/debian trixie/main armhf libexpat1 armhf 2.6.2-1 [83.5 kB] Get: 4 http://deb.debian.org/debian trixie/main armhf python3.11-minimal armhf 3.11.9-1 [1600 kB] Get: 5 http://deb.debian.org/debian trixie/main armhf python3-minimal armhf 3.11.8-1 [26.3 kB] Get: 6 http://deb.debian.org/debian trixie/main armhf media-types all 10.1.0 [26.9 kB] Get: 7 http://deb.debian.org/debian trixie/main armhf netbase all 6.4 [12.8 kB] Get: 8 http://deb.debian.org/debian trixie/main armhf tzdata all 2024a-3 [255 kB] Get: 9 http://deb.debian.org/debian trixie/main armhf readline-common all 8.2-4 [69.3 kB] Get: 10 http://deb.debian.org/debian trixie/main armhf libreadline8t64 armhf 8.2-4 [145 kB] Get: 11 http://deb.debian.org/debian trixie/main armhf libpython3.11-stdlib armhf 3.11.9-1 [1704 kB] Get: 12 http://deb.debian.org/debian trixie/main armhf python3.11 armhf 3.11.9-1 [602 kB] Get: 13 http://deb.debian.org/debian trixie/main armhf libpython3-stdlib armhf 3.11.8-1 [9332 B] Get: 14 http://deb.debian.org/debian trixie/main armhf python3 armhf 3.11.8-1 [27.4 kB] Get: 15 http://deb.debian.org/debian trixie/main armhf sensible-utils all 0.0.22 [22.4 kB] Get: 16 http://deb.debian.org/debian trixie/main armhf libmagic-mgc armhf 1:5.45-3 [314 kB] Get: 17 http://deb.debian.org/debian trixie/main armhf libmagic1t64 armhf 1:5.45-3 [98.1 kB] Get: 18 http://deb.debian.org/debian trixie/main armhf file armhf 1:5.45-3 [42.0 kB] Get: 19 http://deb.debian.org/debian trixie/main armhf gettext-base armhf 0.21-14+b1 [157 kB] Get: 20 http://deb.debian.org/debian trixie/main armhf libuchardet0 armhf 0.0.8-1+b1 [65.7 kB] Get: 21 http://deb.debian.org/debian trixie/main armhf groff-base armhf 1.23.0-4 [1090 kB] Get: 22 http://deb.debian.org/debian trixie/main armhf bsdextrautils armhf 2.40-8 [85.6 kB] Get: 23 http://deb.debian.org/debian trixie/main armhf libpipeline1 armhf 1.5.7-2 [33.3 kB] Get: 24 http://deb.debian.org/debian trixie/main armhf man-db armhf 2.12.1-1 [1375 kB] Get: 25 http://deb.debian.org/debian trixie/main armhf m4 armhf 1.4.19-4 [264 kB] Get: 26 http://deb.debian.org/debian trixie/main armhf autoconf all 2.71-3 [332 kB] Get: 27 http://deb.debian.org/debian trixie/main armhf autotools-dev all 20220109.1 [51.6 kB] Get: 28 http://deb.debian.org/debian trixie/main armhf automake all 1:1.16.5-1.3 [823 kB] Get: 29 http://deb.debian.org/debian trixie/main armhf autopoint all 0.21-14 [496 kB] Get: 30 http://deb.debian.org/debian trixie/main armhf libdebhelper-perl all 13.15.3 [88.0 kB] Get: 31 http://deb.debian.org/debian trixie/main armhf libtool all 2.4.7-7 [517 kB] Get: 32 http://deb.debian.org/debian trixie/main armhf dh-autoreconf all 20 [17.1 kB] Get: 33 http://deb.debian.org/debian trixie/main armhf libarchive-zip-perl all 1.68-1 [104 kB] Get: 34 http://deb.debian.org/debian trixie/main armhf libsub-override-perl all 0.10-1 [10.6 kB] Get: 35 http://deb.debian.org/debian trixie/main armhf libfile-stripnondeterminism-perl all 1.13.1-1 [19.4 kB] Get: 36 http://deb.debian.org/debian trixie/main armhf dh-strip-nondeterminism all 1.13.1-1 [8620 B] Get: 37 http://deb.debian.org/debian trixie/main armhf libelf1t64 armhf 0.191-1+b1 [183 kB] Get: 38 http://deb.debian.org/debian trixie/main armhf dwz armhf 0.15-1+b2 [106 kB] Get: 39 http://deb.debian.org/debian trixie/main armhf libicu72 armhf 72.1-4+b1 [9070 kB] Get: 40 http://deb.debian.org/debian trixie/main armhf libxml2 armhf 2.9.14+dfsg-1.3+b3 [598 kB] Get: 41 http://deb.debian.org/debian trixie/main armhf gettext armhf 0.21-14+b1 [1230 kB] Get: 42 http://deb.debian.org/debian trixie/main armhf intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 43 http://deb.debian.org/debian trixie/main armhf po-debconf all 1.0.21+nmu1 [248 kB] Get: 44 http://deb.debian.org/debian trixie/main armhf debhelper all 13.15.3 [901 kB] Get: 45 http://deb.debian.org/debian trixie/main armhf uuid-dev armhf 2.40-8 [42.5 kB] Get: 46 http://deb.debian.org/debian trixie/main armhf libblkid-dev armhf 2.40-8 [190 kB] Get: 47 http://deb.debian.org/debian trixie/main armhf libbrotli1 armhf 1.1.0-2+b3 [284 kB] Get: 48 http://deb.debian.org/debian trixie/main armhf libcom-err2 armhf 1.47.1~rc2-1 [21.8 kB] Get: 49 http://deb.debian.org/debian trixie/main armhf libkrb5support0 armhf 1.20.1-6+b1 [30.6 kB] Get: 50 http://deb.debian.org/debian trixie/main armhf libk5crypto3 armhf 1.20.1-6+b1 [75.5 kB] Get: 51 http://deb.debian.org/debian trixie/main armhf libkeyutils1 armhf 1.6.3-3 [7908 B] Get: 52 http://deb.debian.org/debian trixie/main armhf libkrb5-3 armhf 1.20.1-6+b1 [290 kB] Get: 53 http://deb.debian.org/debian trixie/main armhf libgssapi-krb5-2 armhf 1.20.1-6+b1 [112 kB] Get: 54 http://deb.debian.org/debian trixie/main armhf libnghttp2-14 armhf 1.61.0-1+b1 [64.1 kB] Get: 55 http://deb.debian.org/debian trixie/main armhf libpsl5t64 armhf 0.21.2-1.1 [55.6 kB] Get: 56 http://deb.debian.org/debian trixie/main armhf librtmp1 armhf 2.4+20151223.gitfa8646d.1-2+b4 [53.2 kB] Get: 57 http://deb.debian.org/debian trixie/main armhf libssh2-1t64 armhf 1.11.0-4.1+b2 [198 kB] Get: 58 http://deb.debian.org/debian trixie/main armhf libcurl3t64-gnutls armhf 8.7.1-3 [384 kB] Get: 59 http://deb.debian.org/debian trixie/main armhf libcurl4-gnutls-dev armhf 8.7.1-3 [497 kB] Get: 60 http://deb.debian.org/debian trixie/main armhf libffi-dev armhf 3.4.6-1 [55.9 kB] Get: 61 http://deb.debian.org/debian trixie/main armhf libgpg-error-dev armhf 1.47-3+b1 [126 kB] Get: 62 http://deb.debian.org/debian trixie/main armhf libgcrypt20-dev armhf 1.10.3-2+b1 [692 kB] Get: 63 http://deb.debian.org/debian trixie/main armhf libglib2.0-0t64 armhf 2.78.4-7 [1285 kB] Get: 64 http://deb.debian.org/debian trixie/main armhf libglib2.0-data all 2.78.4-7 [1225 kB] Get: 65 http://deb.debian.org/debian trixie/main armhf libglib2.0-bin armhf 2.78.4-7 [110 kB] Get: 66 http://deb.debian.org/debian trixie/main armhf python3-packaging all 24.0-1 [45.5 kB] Get: 67 http://deb.debian.org/debian trixie/main armhf libglib2.0-dev-bin armhf 2.78.4-7 [155 kB] Get: 68 http://deb.debian.org/debian trixie/main armhf libsepol-dev armhf 3.5-2+b1 [320 kB] Get: 69 http://deb.debian.org/debian trixie/main armhf libpcre2-16-0 armhf 10.42-4+b1 [212 kB] Get: 70 http://deb.debian.org/debian trixie/main armhf libpcre2-32-0 armhf 10.42-4+b1 [203 kB] Get: 71 http://deb.debian.org/debian trixie/main armhf libpcre2-posix3 armhf 10.42-4+b1 [55.3 kB] Get: 72 http://deb.debian.org/debian trixie/main armhf libpcre2-dev armhf 10.42-4+b1 [668 kB] Get: 73 http://deb.debian.org/debian trixie/main armhf libselinux1-dev armhf 3.5-2+b2 [152 kB] Get: 74 http://deb.debian.org/debian trixie/main armhf libmount-dev armhf 2.40-8 [25.9 kB] Get: 75 http://deb.debian.org/debian trixie/main armhf libpkgconf3 armhf 1.8.1-1+b2 [31.9 kB] Get: 76 http://deb.debian.org/debian trixie/main armhf pkgconf-bin armhf 1.8.1-1+b2 [28.9 kB] Get: 77 http://deb.debian.org/debian trixie/main armhf pkgconf armhf 1.8.1-1+b2 [26.2 kB] Get: 78 http://deb.debian.org/debian trixie/main armhf zlib1g-dev armhf 1:1.3.dfsg-3.1 [904 kB] Get: 79 http://deb.debian.org/debian trixie/main armhf libglib2.0-dev armhf 2.78.4-7 [1529 kB] Get: 80 http://deb.debian.org/debian trixie/main armhf libssl-dev armhf 3.2.1-3 [2348 kB] Get: 81 http://deb.debian.org/debian trixie/main armhf libplist3 armhf 2.2.0-7+b1 [31.2 kB] Get: 82 http://deb.debian.org/debian trixie/main armhf libusbmuxd6 armhf 2.0.2-4+b1 [19.0 kB] Get: 83 http://deb.debian.org/debian trixie/main armhf libimobiledevice6 armhf 1.3.0-7.1+b1 [64.0 kB] Get: 84 http://deb.debian.org/debian trixie/main armhf libplist-dev armhf 2.2.0-7+b1 [10.4 kB] Get: 85 http://deb.debian.org/debian trixie/main armhf libtasn1-6-dev armhf 4.19.0-3+b2 [93.0 kB] Get: 86 http://deb.debian.org/debian trixie/main armhf libusbmuxd-dev armhf 2.0.2-4+b1 [25.9 kB] Get: 87 http://deb.debian.org/debian trixie/main armhf libimobiledevice-dev armhf 1.3.0-7.1+b1 [87.8 kB] Get: 88 http://deb.debian.org/debian trixie/main armhf libirecovery-common all 1.0.0-5 [3228 B] Get: 89 http://deb.debian.org/debian trixie/main armhf libusb-1.0-0 armhf 2:1.0.27-1 [51.1 kB] Get: 90 http://deb.debian.org/debian trixie/main armhf libirecovery-1.0-3 armhf 1.0.0-5+b1 [16.5 kB] Get: 91 http://deb.debian.org/debian trixie/main armhf libusb-1.0-0-dev armhf 2:1.0.27-1 [74.3 kB] Get: 92 http://deb.debian.org/debian trixie/main armhf libirecovery-1.0-dev armhf 1.0.0-5+b1 [18.3 kB] Get: 93 http://deb.debian.org/debian trixie/main armhf libzip4t64 armhf 1.7.3-1.1+b1 [47.6 kB] Get: 94 http://deb.debian.org/debian trixie/main armhf libzip-dev armhf 1.7.3-1.1+b1 [161 kB] Fetched 37.7 MB in 1s (37.9 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package autoconf-archive. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19441 files and directories currently installed.) Preparing to unpack .../autoconf-archive_20220903-3_all.deb ... Unpacking autoconf-archive (20220903-3) ... Selecting previously unselected package libpython3.11-minimal:armhf. Preparing to unpack .../libpython3.11-minimal_3.11.9-1_armhf.deb ... Unpacking libpython3.11-minimal:armhf (3.11.9-1) ... Selecting previously unselected package libexpat1:armhf. Preparing to unpack .../libexpat1_2.6.2-1_armhf.deb ... Unpacking libexpat1:armhf (2.6.2-1) ... Selecting previously unselected package python3.11-minimal. Preparing to unpack .../python3.11-minimal_3.11.9-1_armhf.deb ... Unpacking python3.11-minimal (3.11.9-1) ... Setting up libpython3.11-minimal:armhf (3.11.9-1) ... Setting up libexpat1:armhf (2.6.2-1) ... Setting up python3.11-minimal (3.11.9-1) ... Selecting previously unselected package python3-minimal. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20939 files and directories currently installed.) Preparing to unpack .../0-python3-minimal_3.11.8-1_armhf.deb ... Unpacking python3-minimal (3.11.8-1) ... Selecting previously unselected package media-types. Preparing to unpack .../1-media-types_10.1.0_all.deb ... Unpacking media-types (10.1.0) ... Selecting previously unselected package netbase. Preparing to unpack .../2-netbase_6.4_all.deb ... Unpacking netbase (6.4) ... Selecting previously unselected package tzdata. Preparing to unpack .../3-tzdata_2024a-3_all.deb ... Unpacking tzdata (2024a-3) ... Selecting previously unselected package readline-common. Preparing to unpack .../4-readline-common_8.2-4_all.deb ... Unpacking readline-common (8.2-4) ... Selecting previously unselected package libreadline8t64:armhf. Preparing to unpack .../5-libreadline8t64_8.2-4_armhf.deb ... Adding 'diversion of /lib/arm-linux-gnueabihf/libhistory.so.8 to /lib/arm-linux-gnueabihf/libhistory.so.8.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/arm-linux-gnueabihf/libhistory.so.8.2 to /lib/arm-linux-gnueabihf/libhistory.so.8.2.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/arm-linux-gnueabihf/libreadline.so.8 to /lib/arm-linux-gnueabihf/libreadline.so.8.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/arm-linux-gnueabihf/libreadline.so.8.2 to /lib/arm-linux-gnueabihf/libreadline.so.8.2.usr-is-merged by libreadline8t64' Unpacking libreadline8t64:armhf (8.2-4) ... Selecting previously unselected package libpython3.11-stdlib:armhf. Preparing to unpack .../6-libpython3.11-stdlib_3.11.9-1_armhf.deb ... Unpacking libpython3.11-stdlib:armhf (3.11.9-1) ... Selecting previously unselected package python3.11. Preparing to unpack .../7-python3.11_3.11.9-1_armhf.deb ... Unpacking python3.11 (3.11.9-1) ... Selecting previously unselected package libpython3-stdlib:armhf. Preparing to unpack .../8-libpython3-stdlib_3.11.8-1_armhf.deb ... Unpacking libpython3-stdlib:armhf (3.11.8-1) ... Setting up python3-minimal (3.11.8-1) ... Selecting previously unselected package python3. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 21931 files and directories currently installed.) Preparing to unpack .../00-python3_3.11.8-1_armhf.deb ... Unpacking python3 (3.11.8-1) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../01-sensible-utils_0.0.22_all.deb ... Unpacking sensible-utils (0.0.22) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../02-libmagic-mgc_1%3a5.45-3_armhf.deb ... Unpacking libmagic-mgc (1:5.45-3) ... Selecting previously unselected package libmagic1t64:armhf. Preparing to unpack .../03-libmagic1t64_1%3a5.45-3_armhf.deb ... Unpacking libmagic1t64:armhf (1:5.45-3) ... Selecting previously unselected package file. Preparing to unpack .../04-file_1%3a5.45-3_armhf.deb ... Unpacking file (1:5.45-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../05-gettext-base_0.21-14+b1_armhf.deb ... Unpacking gettext-base (0.21-14+b1) ... Selecting previously unselected package libuchardet0:armhf. Preparing to unpack .../06-libuchardet0_0.0.8-1+b1_armhf.deb ... Unpacking libuchardet0:armhf (0.0.8-1+b1) ... Selecting previously unselected package groff-base. Preparing to unpack .../07-groff-base_1.23.0-4_armhf.deb ... Unpacking groff-base (1.23.0-4) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../08-bsdextrautils_2.40-8_armhf.deb ... Unpacking bsdextrautils (2.40-8) ... Selecting previously unselected package libpipeline1:armhf. Preparing to unpack .../09-libpipeline1_1.5.7-2_armhf.deb ... Unpacking libpipeline1:armhf (1.5.7-2) ... Selecting previously unselected package man-db. Preparing to unpack .../10-man-db_2.12.1-1_armhf.deb ... Unpacking man-db (2.12.1-1) ... Selecting previously unselected package m4. Preparing to unpack .../11-m4_1.4.19-4_armhf.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../12-autoconf_2.71-3_all.deb ... Unpacking autoconf (2.71-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../13-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../14-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../15-autopoint_0.21-14_all.deb ... Unpacking autopoint (0.21-14) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../16-libdebhelper-perl_13.15.3_all.deb ... Unpacking libdebhelper-perl (13.15.3) ... Selecting previously unselected package libtool. Preparing to unpack .../17-libtool_2.4.7-7_all.deb ... Unpacking libtool (2.4.7-7) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../18-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../19-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libsub-override-perl. Preparing to unpack .../20-libsub-override-perl_0.10-1_all.deb ... Unpacking libsub-override-perl (0.10-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../21-libfile-stripnondeterminism-perl_1.13.1-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.13.1-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../22-dh-strip-nondeterminism_1.13.1-1_all.deb ... Unpacking dh-strip-nondeterminism (1.13.1-1) ... Selecting previously unselected package libelf1t64:armhf. Preparing to unpack .../23-libelf1t64_0.191-1+b1_armhf.deb ... Unpacking libelf1t64:armhf (0.191-1+b1) ... Selecting previously unselected package dwz. Preparing to unpack .../24-dwz_0.15-1+b2_armhf.deb ... Unpacking dwz (0.15-1+b2) ... Selecting previously unselected package libicu72:armhf. Preparing to unpack .../25-libicu72_72.1-4+b1_armhf.deb ... Unpacking libicu72:armhf (72.1-4+b1) ... Selecting previously unselected package libxml2:armhf. Preparing to unpack .../26-libxml2_2.9.14+dfsg-1.3+b3_armhf.deb ... Unpacking libxml2:armhf (2.9.14+dfsg-1.3+b3) ... Selecting previously unselected package gettext. Preparing to unpack .../27-gettext_0.21-14+b1_armhf.deb ... Unpacking gettext (0.21-14+b1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../28-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../29-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../30-debhelper_13.15.3_all.deb ... Unpacking debhelper (13.15.3) ... Selecting previously unselected package uuid-dev:armhf. Preparing to unpack .../31-uuid-dev_2.40-8_armhf.deb ... Unpacking uuid-dev:armhf (2.40-8) ... Selecting previously unselected package libblkid-dev:armhf. Preparing to unpack .../32-libblkid-dev_2.40-8_armhf.deb ... Unpacking libblkid-dev:armhf (2.40-8) ... Selecting previously unselected package libbrotli1:armhf. Preparing to unpack .../33-libbrotli1_1.1.0-2+b3_armhf.deb ... Unpacking libbrotli1:armhf (1.1.0-2+b3) ... Selecting previously unselected package libcom-err2:armhf. Preparing to unpack .../34-libcom-err2_1.47.1~rc2-1_armhf.deb ... Unpacking libcom-err2:armhf (1.47.1~rc2-1) ... Selecting previously unselected package libkrb5support0:armhf. Preparing to unpack .../35-libkrb5support0_1.20.1-6+b1_armhf.deb ... Unpacking libkrb5support0:armhf (1.20.1-6+b1) ... Selecting previously unselected package libk5crypto3:armhf. Preparing to unpack .../36-libk5crypto3_1.20.1-6+b1_armhf.deb ... Unpacking libk5crypto3:armhf (1.20.1-6+b1) ... Selecting previously unselected package libkeyutils1:armhf. Preparing to unpack .../37-libkeyutils1_1.6.3-3_armhf.deb ... Unpacking libkeyutils1:armhf (1.6.3-3) ... Selecting previously unselected package libkrb5-3:armhf. Preparing to unpack .../38-libkrb5-3_1.20.1-6+b1_armhf.deb ... Unpacking libkrb5-3:armhf (1.20.1-6+b1) ... Selecting previously unselected package libgssapi-krb5-2:armhf. Preparing to unpack .../39-libgssapi-krb5-2_1.20.1-6+b1_armhf.deb ... Unpacking libgssapi-krb5-2:armhf (1.20.1-6+b1) ... Selecting previously unselected package libnghttp2-14:armhf. Preparing to unpack .../40-libnghttp2-14_1.61.0-1+b1_armhf.deb ... Unpacking libnghttp2-14:armhf (1.61.0-1+b1) ... Selecting previously unselected package libpsl5t64:armhf. Preparing to unpack .../41-libpsl5t64_0.21.2-1.1_armhf.deb ... Unpacking libpsl5t64:armhf (0.21.2-1.1) ... Selecting previously unselected package librtmp1:armhf. Preparing to unpack .../42-librtmp1_2.4+20151223.gitfa8646d.1-2+b4_armhf.deb ... Unpacking librtmp1:armhf (2.4+20151223.gitfa8646d.1-2+b4) ... Selecting previously unselected package libssh2-1t64:armhf. Preparing to unpack .../43-libssh2-1t64_1.11.0-4.1+b2_armhf.deb ... Unpacking libssh2-1t64:armhf (1.11.0-4.1+b2) ... Selecting previously unselected package libcurl3t64-gnutls:armhf. Preparing to unpack .../44-libcurl3t64-gnutls_8.7.1-3_armhf.deb ... Unpacking libcurl3t64-gnutls:armhf (8.7.1-3) ... Selecting previously unselected package libcurl4-gnutls-dev:armhf. Preparing to unpack .../45-libcurl4-gnutls-dev_8.7.1-3_armhf.deb ... Unpacking libcurl4-gnutls-dev:armhf (8.7.1-3) ... Selecting previously unselected package libffi-dev:armhf. Preparing to unpack .../46-libffi-dev_3.4.6-1_armhf.deb ... Unpacking libffi-dev:armhf (3.4.6-1) ... Selecting previously unselected package libgpg-error-dev. Preparing to unpack .../47-libgpg-error-dev_1.47-3+b1_armhf.deb ... Unpacking libgpg-error-dev (1.47-3+b1) ... Selecting previously unselected package libgcrypt20-dev. Preparing to unpack .../48-libgcrypt20-dev_1.10.3-2+b1_armhf.deb ... Unpacking libgcrypt20-dev (1.10.3-2+b1) ... Selecting previously unselected package libglib2.0-0t64:armhf. Preparing to unpack .../49-libglib2.0-0t64_2.78.4-7_armhf.deb ... Unpacking libglib2.0-0t64:armhf (2.78.4-7) ... Selecting previously unselected package libglib2.0-data. Preparing to unpack .../50-libglib2.0-data_2.78.4-7_all.deb ... Unpacking libglib2.0-data (2.78.4-7) ... Selecting previously unselected package libglib2.0-bin. Preparing to unpack .../51-libglib2.0-bin_2.78.4-7_armhf.deb ... Unpacking libglib2.0-bin (2.78.4-7) ... Selecting previously unselected package python3-packaging. Preparing to unpack .../52-python3-packaging_24.0-1_all.deb ... Unpacking python3-packaging (24.0-1) ... Selecting previously unselected package libglib2.0-dev-bin. Preparing to unpack .../53-libglib2.0-dev-bin_2.78.4-7_armhf.deb ... Unpacking libglib2.0-dev-bin (2.78.4-7) ... Selecting previously unselected package libsepol-dev:armhf. Preparing to unpack .../54-libsepol-dev_3.5-2+b1_armhf.deb ... Unpacking libsepol-dev:armhf (3.5-2+b1) ... Selecting previously unselected package libpcre2-16-0:armhf. Preparing to unpack .../55-libpcre2-16-0_10.42-4+b1_armhf.deb ... Unpacking libpcre2-16-0:armhf (10.42-4+b1) ... Selecting previously unselected package libpcre2-32-0:armhf. Preparing to unpack .../56-libpcre2-32-0_10.42-4+b1_armhf.deb ... Unpacking libpcre2-32-0:armhf (10.42-4+b1) ... Selecting previously unselected package libpcre2-posix3:armhf. Preparing to unpack .../57-libpcre2-posix3_10.42-4+b1_armhf.deb ... Unpacking libpcre2-posix3:armhf (10.42-4+b1) ... Selecting previously unselected package libpcre2-dev:armhf. Preparing to unpack .../58-libpcre2-dev_10.42-4+b1_armhf.deb ... Unpacking libpcre2-dev:armhf (10.42-4+b1) ... Selecting previously unselected package libselinux1-dev:armhf. Preparing to unpack .../59-libselinux1-dev_3.5-2+b2_armhf.deb ... Unpacking libselinux1-dev:armhf (3.5-2+b2) ... Selecting previously unselected package libmount-dev:armhf. Preparing to unpack .../60-libmount-dev_2.40-8_armhf.deb ... Unpacking libmount-dev:armhf (2.40-8) ... Selecting previously unselected package libpkgconf3:armhf. Preparing to unpack .../61-libpkgconf3_1.8.1-1+b2_armhf.deb ... Unpacking libpkgconf3:armhf (1.8.1-1+b2) ... Selecting previously unselected package pkgconf-bin. Preparing to unpack .../62-pkgconf-bin_1.8.1-1+b2_armhf.deb ... Unpacking pkgconf-bin (1.8.1-1+b2) ... Selecting previously unselected package pkgconf:armhf. Preparing to unpack .../63-pkgconf_1.8.1-1+b2_armhf.deb ... Unpacking pkgconf:armhf (1.8.1-1+b2) ... Selecting previously unselected package zlib1g-dev:armhf. Preparing to unpack .../64-zlib1g-dev_1%3a1.3.dfsg-3.1_armhf.deb ... Unpacking zlib1g-dev:armhf (1:1.3.dfsg-3.1) ... Selecting previously unselected package libglib2.0-dev:armhf. Preparing to unpack .../65-libglib2.0-dev_2.78.4-7_armhf.deb ... Unpacking libglib2.0-dev:armhf (2.78.4-7) ... Selecting previously unselected package libssl-dev:armhf. Preparing to unpack .../66-libssl-dev_3.2.1-3_armhf.deb ... Unpacking libssl-dev:armhf (3.2.1-3) ... Selecting previously unselected package libplist3:armhf. Preparing to unpack .../67-libplist3_2.2.0-7+b1_armhf.deb ... Unpacking libplist3:armhf (2.2.0-7+b1) ... Selecting previously unselected package libusbmuxd6:armhf. Preparing to unpack .../68-libusbmuxd6_2.0.2-4+b1_armhf.deb ... Unpacking libusbmuxd6:armhf (2.0.2-4+b1) ... Selecting previously unselected package libimobiledevice6:armhf. Preparing to unpack .../69-libimobiledevice6_1.3.0-7.1+b1_armhf.deb ... Unpacking libimobiledevice6:armhf (1.3.0-7.1+b1) ... Selecting previously unselected package libplist-dev:armhf. Preparing to unpack .../70-libplist-dev_2.2.0-7+b1_armhf.deb ... Unpacking libplist-dev:armhf (2.2.0-7+b1) ... Selecting previously unselected package libtasn1-6-dev:armhf. Preparing to unpack .../71-libtasn1-6-dev_4.19.0-3+b2_armhf.deb ... Unpacking libtasn1-6-dev:armhf (4.19.0-3+b2) ... Selecting previously unselected package libusbmuxd-dev:armhf. Preparing to unpack .../72-libusbmuxd-dev_2.0.2-4+b1_armhf.deb ... Unpacking libusbmuxd-dev:armhf (2.0.2-4+b1) ... Selecting previously unselected package libimobiledevice-dev. Preparing to unpack .../73-libimobiledevice-dev_1.3.0-7.1+b1_armhf.deb ... Unpacking libimobiledevice-dev (1.3.0-7.1+b1) ... Selecting previously unselected package libirecovery-common. Preparing to unpack .../74-libirecovery-common_1.0.0-5_all.deb ... Unpacking libirecovery-common (1.0.0-5) ... Selecting previously unselected package libusb-1.0-0:armhf. Preparing to unpack .../75-libusb-1.0-0_2%3a1.0.27-1_armhf.deb ... Unpacking libusb-1.0-0:armhf (2:1.0.27-1) ... Selecting previously unselected package libirecovery-1.0-3:armhf. Preparing to unpack .../76-libirecovery-1.0-3_1.0.0-5+b1_armhf.deb ... Unpacking libirecovery-1.0-3:armhf (1.0.0-5+b1) ... Selecting previously unselected package libusb-1.0-0-dev:armhf. Preparing to unpack .../77-libusb-1.0-0-dev_2%3a1.0.27-1_armhf.deb ... Unpacking libusb-1.0-0-dev:armhf (2:1.0.27-1) ... Selecting previously unselected package libirecovery-1.0-dev. Preparing to unpack .../78-libirecovery-1.0-dev_1.0.0-5+b1_armhf.deb ... Unpacking libirecovery-1.0-dev (1.0.0-5+b1) ... Selecting previously unselected package libzip4t64:armhf. Preparing to unpack .../79-libzip4t64_1.7.3-1.1+b1_armhf.deb ... Unpacking libzip4t64:armhf (1.7.3-1.1+b1) ... Selecting previously unselected package libzip-dev:armhf. Preparing to unpack .../80-libzip-dev_1.7.3-1.1+b1_armhf.deb ... Unpacking libzip-dev:armhf (1.7.3-1.1+b1) ... Setting up media-types (10.1.0) ... Setting up libpipeline1:armhf (1.5.7-2) ... Setting up libkeyutils1:armhf (1.6.3-3) ... Setting up libicu72:armhf (72.1-4+b1) ... Setting up bsdextrautils (2.40-8) ... Setting up libplist3:armhf (2.2.0-7+b1) ... Setting up libmagic-mgc (1:5.45-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.15.3) ... Setting up libbrotli1:armhf (1.1.0-2+b3) ... Setting up libmagic1t64:armhf (1:5.45-3) ... Setting up libpsl5t64:armhf (0.21.2-1.1) ... Setting up libnghttp2-14:armhf (1.61.0-1+b1) ... Setting up gettext-base (0.21-14+b1) ... Setting up m4 (1.4.19-4) ... Setting up autoconf-archive (20220903-3) ... Setting up libcom-err2:armhf (1.47.1~rc2-1) ... Setting up file (1:5.45-3) ... Setting up libirecovery-common (1.0.0-5) ... Setting up libffi-dev:armhf (3.4.6-1) ... Setting up libpcre2-16-0:armhf (10.42-4+b1) ... Setting up libelf1t64:armhf (0.191-1+b1) ... Setting up libkrb5support0:armhf (1.20.1-6+b1) ... Setting up tzdata (2024a-3) ... Current default time zone: 'Etc/UTC' Local time is now: Sun May 5 11:03:49 UTC 2024. Universal Time is now: Sun May 5 11:03:49 UTC 2024. Run 'dpkg-reconfigure tzdata' if you wish to change it. Setting up autotools-dev (20220109.1) ... Setting up libpcre2-32-0:armhf (10.42-4+b1) ... Setting up libglib2.0-0t64:armhf (2.78.4-7) ... No schema files found: doing nothing. Setting up libglib2.0-data (2.78.4-7) ... Setting up libpkgconf3:armhf (1.8.1-1+b2) ... Setting up libgpg-error-dev (1.47-3+b1) ... Setting up librtmp1:armhf (2.4+20151223.gitfa8646d.1-2+b4) ... Setting up uuid-dev:armhf (2.40-8) ... Setting up libssl-dev:armhf (3.2.1-3) ... Setting up autopoint (0.21-14) ... Setting up libsepol-dev:armhf (3.5-2+b1) ... Setting up pkgconf-bin (1.8.1-1+b2) ... Setting up libk5crypto3:armhf (1.20.1-6+b1) ... Setting up libplist-dev:armhf (2.2.0-7+b1) ... Setting up autoconf (2.71-3) ... Setting up zlib1g-dev:armhf (1:1.3.dfsg-3.1) ... Setting up libpcre2-posix3:armhf (10.42-4+b1) ... Setting up dwz (0.15-1+b2) ... Setting up sensible-utils (0.0.22) ... Setting up libusbmuxd6:armhf (2.0.2-4+b1) ... Setting up libuchardet0:armhf (0.0.8-1+b1) ... Setting up libsub-override-perl (0.10-1) ... Setting up netbase (6.4) ... Setting up libkrb5-3:armhf (1.20.1-6+b1) ... Setting up libusb-1.0-0:armhf (2:1.0.27-1) ... Setting up libssh2-1t64:armhf (1.11.0-4.1+b2) ... Setting up libimobiledevice6:armhf (1.3.0-7.1+b1) ... Setting up libzip4t64:armhf (1.7.3-1.1+b1) ... Setting up libtasn1-6-dev:armhf (4.19.0-3+b2) ... Setting up readline-common (8.2-4) ... Setting up libxml2:armhf (2.9.14+dfsg-1.3+b3) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libirecovery-1.0-3:armhf (1.0.0-5+b1) ... Setting up libfile-stripnondeterminism-perl (1.13.1-1) ... Setting up libblkid-dev:armhf (2.40-8) ... Setting up libzip-dev:armhf (1.7.3-1.1+b1) ... Setting up gettext (0.21-14+b1) ... Setting up libpcre2-dev:armhf (10.42-4+b1) ... Setting up libtool (2.4.7-7) ... Setting up libselinux1-dev:armhf (3.5-2+b2) ... Setting up libusbmuxd-dev:armhf (2.0.2-4+b1) ... Setting up libglib2.0-bin (2.78.4-7) ... Setting up libusb-1.0-0-dev:armhf (2:1.0.27-1) ... Setting up pkgconf:armhf (1.8.1-1+b2) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up libgcrypt20-dev (1.10.3-2+b1) ... Setting up libgssapi-krb5-2:armhf (1.20.1-6+b1) ... Setting up libreadline8t64:armhf (8.2-4) ... Setting up dh-strip-nondeterminism (1.13.1-1) ... Setting up groff-base (1.23.0-4) ... Setting up libmount-dev:armhf (2.40-8) ... Setting up libirecovery-1.0-dev (1.0.0-5+b1) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up libpython3.11-stdlib:armhf (3.11.9-1) ... Setting up libcurl3t64-gnutls:armhf (8.7.1-3) ... Setting up libcurl4-gnutls-dev:armhf (8.7.1-3) ... Setting up man-db (2.12.1-1) ... Not building database; man-db/auto-update is not 'true'. Setting up libpython3-stdlib:armhf (3.11.8-1) ... Setting up python3.11 (3.11.9-1) ... Setting up debhelper (13.15.3) ... Setting up python3 (3.11.8-1) ... Setting up python3-packaging (24.0-1) ... Setting up libglib2.0-dev-bin (2.78.4-7) ... Setting up libglib2.0-dev:armhf (2.78.4-7) ... Setting up libimobiledevice-dev (1.3.0-7.1+b1) ... Processing triggers for libc-bin (2.37-19) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.33-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/reproducible-path/idevicerestore-1.0.0/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../idevicerestore_1.0.0-3_source.changes dpkg-buildpackage: info: source package idevicerestore dpkg-buildpackage: info: source version 1.0.0-3 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Yves-Alexis Perez dpkg-source --before-build . dpkg-buildpackage: info: host architecture armhf fakeroot debian/rules clean dh clean dh_clean debian/rules build dh build dh_update_autotools_config dh_autoreconf libtoolize: putting auxiliary files in '.'. libtoolize: copying file './ltmain.sh' libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'. libtoolize: copying file 'm4/libtool.m4' libtoolize: copying file 'm4/ltoptions.m4' libtoolize: copying file 'm4/ltsugar.m4' libtoolize: copying file 'm4/ltversion.m4' libtoolize: copying file 'm4/lt~obsolete.m4' configure.ac:7: warning: The macro `AC_CANONICAL_SYSTEM' is obsolete. configure.ac:7: You should run autoupdate. ./lib/autoconf/general.m4:2081: AC_CANONICAL_SYSTEM is expanded from... configure.ac:7: the top level configure.ac:35: warning: The macro `AC_PROG_LIBTOOL' is obsolete. configure.ac:35: You should run autoupdate. m4/libtool.m4:100: AC_PROG_LIBTOOL is expanded from... configure.ac:35: the top level configure.ac:62: warning: $as_echo is obsolete; use AS_ECHO(["message"]) instead lib/m4sugar/m4sh.m4:692: _AS_IF_ELSE is expanded from... lib/m4sugar/m4sh.m4:699: AS_IF is expanded from... ./lib/autoconf/general.m4:2249: AC_CACHE_VAL is expanded from... ./lib/autoconf/general.m4:2270: AC_CACHE_CHECK is expanded from... m4/ax_pthread.m4:88: AX_PTHREAD is expanded from... configure.ac:62: the top level configure.ac:66: warning: $as_echo is obsolete; use AS_ECHO(["message"]) instead lib/m4sugar/m4sh.m4:692: _AS_IF_ELSE is expanded from... lib/m4sugar/m4sh.m4:699: AS_IF is expanded from... ./lib/autoconf/general.m4:2249: AC_CACHE_VAL is expanded from... ./lib/autoconf/general.m4:2270: AC_CACHE_CHECK is expanded from... m4/ax_pthread.m4:88: AX_PTHREAD is expanded from... configure.ac:66: the top level configure.ac:84: warning: The macro `AC_TRY_COMPILE' is obsolete. configure.ac:84: You should run autoupdate. ./lib/autoconf/general.m4:2847: AC_TRY_COMPILE is expanded from... configure.ac:84: the top level configure.ac:94: warning: The macro `AC_TRY_COMPILE' is obsolete. configure.ac:94: You should run autoupdate. ./lib/autoconf/general.m4:2847: AC_TRY_COMPILE is expanded from... configure.ac:94: the top level configure.ac:105: warning: The macro `AC_TRY_COMPILE' is obsolete. configure.ac:105: You should run autoupdate. ./lib/autoconf/general.m4:2847: AC_TRY_COMPILE is expanded from... configure.ac:105: the top level configure.ac:152: warning: AC_OUTPUT should be used without arguments. configure.ac:152: You should run autoupdate. configure.ac:33: installing './compile' configure.ac:7: installing './config.guess' configure.ac:7: installing './config.sub' configure.ac:8: installing './install-sh' configure.ac:8: installing './missing' src/Makefile.am: installing './depcomp' dh_auto_configure ./configure --build=arm-linux-gnueabihf --prefix=/usr --includedir=\${prefix}/include --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info --sysconfdir=/etc --localstatedir=/var --disable-option-checking --disable-silent-rules --libdir=\${prefix}/lib/arm-linux-gnueabihf --runstatedir=/run --disable-maintainer-mode --disable-dependency-tracking checking build system type... arm-unknown-linux-gnueabihf checking host system type... arm-unknown-linux-gnueabihf checking target system type... arm-unknown-linux-gnueabihf checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a race-free mkdir -p... /usr/bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether gcc accepts -g... yes checking for gcc option to enable C11 features... none needed checking whether gcc understands -c and -o together... yes checking whether make supports the include directive... yes (GNU style) checking dependency style of gcc... none checking how to print strings... printf checking for a sed that does not truncate output... /usr/bin/sed checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for fgrep... /usr/bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert arm-unknown-linux-gnueabihf file names to arm-unknown-linux-gnueabihf format... func_convert_file_noop checking how to convert arm-unknown-linux-gnueabihf file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for file... file checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /usr/bin/dd checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for libirecovery-1.0 >= 1.0.0... yes checking for libimobiledevice-1.0 >= 1.3.0... yes checking for libplist-2.0 >= 2.2.0... yes checking for libzip >= 0.8... yes checking for libcurl >= 7.0... yes checking for zlib... yes checking for openssl >= 0.9.8... yes checking whether we need platform-specific build settings... yes checking whether gcc is Clang... no checking whether pthreads work with -pthread... yes checking for joinable pthread attribute... PTHREAD_CREATE_JOINABLE checking whether more special flags are required for pthreads... no checking for PTHREAD_PRIO_INHERIT... yes checking for pthread_kill in -lpthread... yes checking for strsep... yes checking for strcspn... yes checking for mkstemp... yes checking for realpath... yes checking for IDEVICE_E_TIMEOUT in enum idevice_error_t... yes checking for RESTORE_E_RECEIVE_TIMEOUT in enum restored_error_t... yes checking for enum idevice_connection_type... yes checking for special C compiler options needed for large files... no checking for _FILE_OFFSET_BITS value needed for large files... no checking whether make supports nested variables... (cached) yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating src/Makefile config.status: creating docs/Makefile config.status: creating config.h config.status: executing depfiles commands config.status: executing libtool commands Configuration for idevicerestore 1.0.0: ------------------------------------------- Install prefix: .........: /usr Now type 'make' to build idevicerestore 1.0.0, and then 'make install' for installation. dh_auto_build make -j3 make[1]: Entering directory '/build/reproducible-path/idevicerestore-1.0.0' make all-recursive make[2]: Entering directory '/build/reproducible-path/idevicerestore-1.0.0' Making all in src make[3]: Entering directory '/build/reproducible-path/idevicerestore-1.0.0/src' gcc -DHAVE_CONFIG_H -I. -I.. -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -Wno-multichar -O2 -I/usr/include/libusb-1.0 -I/usr/include/arm-linux-gnueabihf -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/idevicerestore-1.0.0=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -c -o idevicerestore-idevicerestore.o `test -f 'idevicerestore.c' || echo './'`idevicerestore.c gcc -DHAVE_CONFIG_H -I. -I.. -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -Wno-multichar -O2 -I/usr/include/libusb-1.0 -I/usr/include/arm-linux-gnueabihf -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/idevicerestore-1.0.0=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -c -o idevicerestore-common.o `test -f 'common.c' || echo './'`common.c gcc -DHAVE_CONFIG_H -I. -I.. -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -Wno-multichar -O2 -I/usr/include/libusb-1.0 -I/usr/include/arm-linux-gnueabihf -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/idevicerestore-1.0.0=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -c -o idevicerestore-tss.o `test -f 'tss.c' || echo './'`tss.c gcc -DHAVE_CONFIG_H -I. -I.. -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -Wno-multichar -O2 -I/usr/include/libusb-1.0 -I/usr/include/arm-linux-gnueabihf -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/idevicerestore-1.0.0=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -c -o idevicerestore-fls.o `test -f 'fls.c' || echo './'`fls.c gcc -DHAVE_CONFIG_H -I. -I.. -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -Wno-multichar -O2 -I/usr/include/libusb-1.0 -I/usr/include/arm-linux-gnueabihf -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/idevicerestore-1.0.0=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -c -o idevicerestore-mbn.o `test -f 'mbn.c' || echo './'`mbn.c gcc -DHAVE_CONFIG_H -I. -I.. -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -Wno-multichar -O2 -I/usr/include/libusb-1.0 -I/usr/include/arm-linux-gnueabihf -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/idevicerestore-1.0.0=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -c -o idevicerestore-img3.o `test -f 'img3.c' || echo './'`img3.c gcc -DHAVE_CONFIG_H -I. -I.. -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -Wno-multichar -O2 -I/usr/include/libusb-1.0 -I/usr/include/arm-linux-gnueabihf -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/idevicerestore-1.0.0=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -c -o idevicerestore-img4.o `test -f 'img4.c' || echo './'`img4.c gcc -DHAVE_CONFIG_H -I. -I.. -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -Wno-multichar -O2 -I/usr/include/libusb-1.0 -I/usr/include/arm-linux-gnueabihf -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/idevicerestore-1.0.0=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -c -o idevicerestore-ftab.o `test -f 'ftab.c' || echo './'`ftab.c gcc -DHAVE_CONFIG_H -I. -I.. -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -Wno-multichar -O2 -I/usr/include/libusb-1.0 -I/usr/include/arm-linux-gnueabihf -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/idevicerestore-1.0.0=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -c -o idevicerestore-ipsw.o `test -f 'ipsw.c' || echo './'`ipsw.c ipsw.c: In function 'sha1_verify_fp': ipsw.c:696:9: warning: 'SHA1_Init' is deprecated: Since OpenSSL 3.0 [-Wdeprecated-declarations] 696 | SHA1_Init(&sha1ctx); | ^~~~~~~~~ In file included from ipsw.c:36: /usr/include/openssl/sha.h:49:27: note: declared here 49 | OSSL_DEPRECATEDIN_3_0 int SHA1_Init(SHA_CTX *c); | ^~~~~~~~~ ipsw.c:700:17: warning: 'SHA1_Update' is deprecated: Since OpenSSL 3.0 [-Wdeprecated-declarations] 700 | SHA1_Update(&sha1ctx, (const void*)buf, sz); | ^~~~~~~~~~~ /usr/include/openssl/sha.h:50:27: note: declared here 50 | OSSL_DEPRECATEDIN_3_0 int SHA1_Update(SHA_CTX *c, const void *data, size_t len); | ^~~~~~~~~~~ ipsw.c:702:9: warning: 'SHA1_Final' is deprecated: Since OpenSSL 3.0 [-Wdeprecated-declarations] 702 | SHA1_Final(tsha1, &sha1ctx); | ^~~~~~~~~~ /usr/include/openssl/sha.h:51:27: note: declared here 51 | OSSL_DEPRECATEDIN_3_0 int SHA1_Final(unsigned char *md, SHA_CTX *c); | ^~~~~~~~~~ gcc -DHAVE_CONFIG_H -I. -I.. -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -Wno-multichar -O2 -I/usr/include/libusb-1.0 -I/usr/include/arm-linux-gnueabihf -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/idevicerestore-1.0.0=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -c -o idevicerestore-normal.o `test -f 'normal.c' || echo './'`normal.c gcc -DHAVE_CONFIG_H -I. -I.. -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -Wno-multichar -O2 -I/usr/include/libusb-1.0 -I/usr/include/arm-linux-gnueabihf -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/idevicerestore-1.0.0=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -c -o idevicerestore-dfu.o `test -f 'dfu.c' || echo './'`dfu.c gcc -DHAVE_CONFIG_H -I. -I.. -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -Wno-multichar -O2 -I/usr/include/libusb-1.0 -I/usr/include/arm-linux-gnueabihf -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/idevicerestore-1.0.0=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -c -o idevicerestore-recovery.o `test -f 'recovery.c' || echo './'`recovery.c gcc -DHAVE_CONFIG_H -I. -I.. -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -Wno-multichar -O2 -I/usr/include/libusb-1.0 -I/usr/include/arm-linux-gnueabihf -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/idevicerestore-1.0.0=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -c -o idevicerestore-restore.o `test -f 'restore.c' || echo './'`restore.c gcc -DHAVE_CONFIG_H -I. -I.. -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -Wno-multichar -O2 -I/usr/include/libusb-1.0 -I/usr/include/arm-linux-gnueabihf -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/idevicerestore-1.0.0=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -c -o idevicerestore-asr.o `test -f 'asr.c' || echo './'`asr.c asr.c: In function 'asr_send_payload': asr.c:378:17: warning: 'SHA1_Init' is deprecated: Since OpenSSL 3.0 [-Wdeprecated-declarations] 378 | SHA1_Init(&sha1); | ^~~~~~~~~ In file included from asr.c:34: /usr/include/openssl/sha.h:49:27: note: declared here 49 | OSSL_DEPRECATEDIN_3_0 int SHA1_Init(SHA_CTX *c); | ^~~~~~~~~ asr.c:413:25: warning: 'SHA1_Update' is deprecated: Since OpenSSL 3.0 [-Wdeprecated-declarations] 413 | SHA1_Update(&sha1, (unsigned char*)data, size); | ^~~~~~~~~~~ /usr/include/openssl/sha.h:50:27: note: declared here 50 | OSSL_DEPRECATEDIN_3_0 int SHA1_Update(SHA_CTX *c, const void *data, size_t len); | ^~~~~~~~~~~ asr.c:418:33: warning: 'SHA1_Final' is deprecated: Since OpenSSL 3.0 [-Wdeprecated-declarations] 418 | SHA1_Final((unsigned char*)data, &sha1); | ^~~~~~~~~~ /usr/include/openssl/sha.h:51:27: note: declared here 51 | OSSL_DEPRECATEDIN_3_0 int SHA1_Final(unsigned char *md, SHA_CTX *c); | ^~~~~~~~~~ asr.c:429:33: warning: 'SHA1_Init' is deprecated: Since OpenSSL 3.0 [-Wdeprecated-declarations] 429 | SHA1_Init(&sha1); | ^~~~~~~~~ /usr/include/openssl/sha.h:49:27: note: declared here 49 | OSSL_DEPRECATEDIN_3_0 int SHA1_Init(SHA_CTX *c); | ^~~~~~~~~ asr.c:447:17: warning: 'SHA1_Final' is deprecated: Since OpenSSL 3.0 [-Wdeprecated-declarations] 447 | SHA1_Final((unsigned char*)data, &sha1); | ^~~~~~~~~~ /usr/include/openssl/sha.h:51:27: note: declared here 51 | OSSL_DEPRECATEDIN_3_0 int SHA1_Final(unsigned char *md, SHA_CTX *c); | ^~~~~~~~~~ gcc -DHAVE_CONFIG_H -I. -I.. -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -Wno-multichar -O2 -I/usr/include/libusb-1.0 -I/usr/include/arm-linux-gnueabihf -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/idevicerestore-1.0.0=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -c -o idevicerestore-fdr.o `test -f 'fdr.c' || echo './'`fdr.c gcc -DHAVE_CONFIG_H -I. -I.. -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -Wno-multichar -O2 -I/usr/include/libusb-1.0 -I/usr/include/arm-linux-gnueabihf -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/idevicerestore-1.0.0=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -c -o idevicerestore-limera1n.o `test -f 'limera1n.c' || echo './'`limera1n.c gcc -DHAVE_CONFIG_H -I. -I.. -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -Wno-multichar -O2 -I/usr/include/libusb-1.0 -I/usr/include/arm-linux-gnueabihf -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/idevicerestore-1.0.0=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -c -o idevicerestore-download.o `test -f 'download.c' || echo './'`download.c download.c: In function 'download_to_file': download.c:132:17: warning: 'CURLOPT_PROGRESSFUNCTION' is deprecated: since 7.32.0. Use CURLOPT_XFERINFOFUNCTION [-Wdeprecated-declarations] 132 | curl_easy_setopt(handle, CURLOPT_PROGRESSFUNCTION, (curl_progress_callback)&download_progress); | ^~~~~~~~~~~~~~~~ In file included from download.c:25: /usr/include/arm-linux-gnueabihf/curl/curl.h:1291:3: note: declared here 1291 | CURLOPTDEPRECATED(CURLOPT_PROGRESSFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 56, | ^~~~~~~~~~~~~~~~~ gcc -DHAVE_CONFIG_H -I. -I.. -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -Wno-multichar -O2 -I/usr/include/libusb-1.0 -I/usr/include/arm-linux-gnueabihf -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/idevicerestore-1.0.0=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -c -o idevicerestore-locking.o `test -f 'locking.c' || echo './'`locking.c gcc -DHAVE_CONFIG_H -I. -I.. -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -Wno-multichar -O2 -I/usr/include/libusb-1.0 -I/usr/include/arm-linux-gnueabihf -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/idevicerestore-1.0.0=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -c -o idevicerestore-socket.o `test -f 'socket.c' || echo './'`socket.c gcc -DHAVE_CONFIG_H -I. -I.. -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -Wno-multichar -O2 -I/usr/include/libusb-1.0 -I/usr/include/arm-linux-gnueabihf -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/idevicerestore-1.0.0=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -c -o idevicerestore-thread.o `test -f 'thread.c' || echo './'`thread.c gcc -DHAVE_CONFIG_H -I. -I.. -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -Wno-multichar -O2 -I/usr/include/libusb-1.0 -I/usr/include/arm-linux-gnueabihf -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/idevicerestore-1.0.0=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -c -o idevicerestore-jsmn.o `test -f 'jsmn.c' || echo './'`jsmn.c gcc -DHAVE_CONFIG_H -I. -I.. -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -Wno-multichar -O2 -I/usr/include/libusb-1.0 -I/usr/include/arm-linux-gnueabihf -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/idevicerestore-1.0.0=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -c -o idevicerestore-json_plist.o `test -f 'json_plist.c' || echo './'`json_plist.c /bin/bash ../libtool --tag=CC --mode=link gcc -Wno-multichar -O2 -I/usr/include/libusb-1.0 -I/usr/include/arm-linux-gnueabihf -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/idevicerestore-1.0.0=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -lirecovery-1.0 -limobiledevice-1.0 -lplist-2.0 -lplist-2.0 -lzip -lz -lssl -lcrypto -lcurl -Wl,-z,relro -Wl,-z,now -Wl,--as-needed -Wl,-O1 -Wl,-z,defs -o idevicerestore idevicerestore-idevicerestore.o idevicerestore-common.o idevicerestore-tss.o idevicerestore-fls.o idevicerestore-mbn.o idevicerestore-img3.o idevicerestore-img4.o idevicerestore-ftab.o idevicerestore-ipsw.o idevicerestore-normal.o idevicerestore-dfu.o idevicerestore-recovery.o idevicerestore-restore.o idevicerestore-asr.o idevicerestore-fdr.o idevicerestore-limera1n.o idevicerestore-download.o idevicerestore-locking.o idevicerestore-socket.o idevicerestore-thread.o idevicerestore-jsmn.o idevicerestore-json_plist.o -lpthread libtool: link: gcc -Wno-multichar -O2 -I/usr/include/libusb-1.0 -I/usr/include/arm-linux-gnueabihf -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/idevicerestore-1.0.0=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -Wl,-z -Wl,relro -Wl,-z -Wl,now -Wl,--as-needed -Wl,-O1 -Wl,-z -Wl,defs -o idevicerestore idevicerestore-idevicerestore.o idevicerestore-common.o idevicerestore-tss.o idevicerestore-fls.o idevicerestore-mbn.o idevicerestore-img3.o idevicerestore-img4.o idevicerestore-ftab.o idevicerestore-ipsw.o idevicerestore-normal.o idevicerestore-dfu.o idevicerestore-recovery.o idevicerestore-restore.o idevicerestore-asr.o idevicerestore-fdr.o idevicerestore-limera1n.o idevicerestore-download.o idevicerestore-locking.o idevicerestore-socket.o idevicerestore-thread.o idevicerestore-jsmn.o idevicerestore-json_plist.o -lirecovery-1.0 -limobiledevice-1.0 -lplist-2.0 -lzip -lz -lssl -lcrypto -lcurl -lpthread make[3]: Leaving directory '/build/reproducible-path/idevicerestore-1.0.0/src' Making all in docs make[3]: Entering directory '/build/reproducible-path/idevicerestore-1.0.0/docs' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/build/reproducible-path/idevicerestore-1.0.0/docs' make[3]: Entering directory '/build/reproducible-path/idevicerestore-1.0.0' make[3]: Leaving directory '/build/reproducible-path/idevicerestore-1.0.0' make[2]: Leaving directory '/build/reproducible-path/idevicerestore-1.0.0' make[1]: Leaving directory '/build/reproducible-path/idevicerestore-1.0.0' dh_auto_test make -j3 check "TESTSUITEFLAGS=-j3 --verbose" VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/idevicerestore-1.0.0' Making check in src make[2]: Entering directory '/build/reproducible-path/idevicerestore-1.0.0/src' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/build/reproducible-path/idevicerestore-1.0.0/src' Making check in docs make[2]: Entering directory '/build/reproducible-path/idevicerestore-1.0.0/docs' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/build/reproducible-path/idevicerestore-1.0.0/docs' make[2]: Entering directory '/build/reproducible-path/idevicerestore-1.0.0' make[2]: Leaving directory '/build/reproducible-path/idevicerestore-1.0.0' make[1]: Leaving directory '/build/reproducible-path/idevicerestore-1.0.0' create-stamp debian/debhelper-build-stamp fakeroot debian/rules binary dh binary dh_testroot dh_prep dh_auto_install --destdir=debian/idevicerestore/ make -j1 install DESTDIR=/build/reproducible-path/idevicerestore-1.0.0/debian/idevicerestore AM_UPDATE_INFO_DIR=no make[1]: Entering directory '/build/reproducible-path/idevicerestore-1.0.0' Making install in src make[2]: Entering directory '/build/reproducible-path/idevicerestore-1.0.0/src' make[3]: Entering directory '/build/reproducible-path/idevicerestore-1.0.0/src' /usr/bin/mkdir -p '/build/reproducible-path/idevicerestore-1.0.0/debian/idevicerestore/usr/bin' /bin/bash ../libtool --mode=install /usr/bin/install -c idevicerestore '/build/reproducible-path/idevicerestore-1.0.0/debian/idevicerestore/usr/bin' libtool: install: /usr/bin/install -c idevicerestore /build/reproducible-path/idevicerestore-1.0.0/debian/idevicerestore/usr/bin/idevicerestore make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/build/reproducible-path/idevicerestore-1.0.0/src' make[2]: Leaving directory '/build/reproducible-path/idevicerestore-1.0.0/src' Making install in docs make[2]: Entering directory '/build/reproducible-path/idevicerestore-1.0.0/docs' make[3]: Entering directory '/build/reproducible-path/idevicerestore-1.0.0/docs' make[3]: Nothing to be done for 'install-exec-am'. /usr/bin/mkdir -p '/build/reproducible-path/idevicerestore-1.0.0/debian/idevicerestore/usr/share/man/man1' /usr/bin/install -c -m 644 idevicerestore.1 '/build/reproducible-path/idevicerestore-1.0.0/debian/idevicerestore/usr/share/man/man1' make[3]: Leaving directory '/build/reproducible-path/idevicerestore-1.0.0/docs' make[2]: Leaving directory '/build/reproducible-path/idevicerestore-1.0.0/docs' make[2]: Entering directory '/build/reproducible-path/idevicerestore-1.0.0' make[3]: Entering directory '/build/reproducible-path/idevicerestore-1.0.0' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/build/reproducible-path/idevicerestore-1.0.0' make[2]: Leaving directory '/build/reproducible-path/idevicerestore-1.0.0' make[1]: Leaving directory '/build/reproducible-path/idevicerestore-1.0.0' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz dh_strip dh_makeshlibs dh_shlibdeps dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'idevicerestore' in '../idevicerestore_1.0.0-3_armhf.deb'. dpkg-deb: building package 'idevicerestore-dbgsym' in '../idevicerestore-dbgsym_1.0.0-3_armhf.deb'. dpkg-genbuildinfo --build=binary -O../idevicerestore_1.0.0-3_armhf.buildinfo dpkg-genchanges --build=binary -O../idevicerestore_1.0.0-3_armhf.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/30491 and its subdirectories I: Current time: Sat May 4 23:06:04 -12 2024 I: pbuilder-time-stamp: 1714907164 Sun May 5 11:06:15 UTC 2024 I: 1st build successful. Starting 2nd build on remote node cbxi4b-armhf-rb.debian.net. Sun May 5 11:06:15 UTC 2024 I: Preparing to do remote build '2' on cbxi4b-armhf-rb.debian.net. Sun May 5 11:14:11 UTC 2024 I: Deleting $TMPDIR on cbxi4b-armhf-rb.debian.net. Sun May 5 11:14:14 UTC 2024 I: idevicerestore_1.0.0-3_armhf.changes: Format: 1.8 Date: Thu, 22 Oct 2020 10:27:24 +0200 Source: idevicerestore Binary: idevicerestore idevicerestore-dbgsym Architecture: armhf Version: 1.0.0-3 Distribution: unstable Urgency: medium Maintainer: gtkpod Maintainers Changed-By: Yves-Alexis Perez Description: idevicerestore - command-line application to restore firmware files to iOS devices Changes: idevicerestore (1.0.0-3) unstable; urgency=medium . * d/patches: add missing patch to repository Checksums-Sha1: 685aef27e13c4993f35b8fe727628a8d42adc3bf 201820 idevicerestore-dbgsym_1.0.0-3_armhf.deb 42e2c9422912ce4b890402f1677fd7a07622bd07 7249 idevicerestore_1.0.0-3_armhf.buildinfo ba22165aa14d9d140a9c793d62bd544d8eda11d0 74596 idevicerestore_1.0.0-3_armhf.deb Checksums-Sha256: 5ecc66e29f2e95bcecdba50a5bbc2d393841c74e12aa01a59461e99b537d72a5 201820 idevicerestore-dbgsym_1.0.0-3_armhf.deb 90979bf44c789dc69ee46805f536cfdc90ddeb6922cf866fb3095a32678f93a1 7249 idevicerestore_1.0.0-3_armhf.buildinfo d4442f2c1e06d78487deca2bde945b3cc7c8fbb2d4d95dcaacf37d135d2c913f 74596 idevicerestore_1.0.0-3_armhf.deb Files: d03773ecbf3eaf73244a53514a29138f 201820 debug optional idevicerestore-dbgsym_1.0.0-3_armhf.deb 7bb2d1524dbcb814072bd7aa5c788173 7249 utils optional idevicerestore_1.0.0-3_armhf.buildinfo 558804c4e77b22ef8ead4396df454ede 74596 utils optional idevicerestore_1.0.0-3_armhf.deb Sun May 5 11:14:15 UTC 2024 I: diffoscope 265 will be used to compare the two builds: Running as unit: rb-diffoscope-armhf_5-5187.service # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.OXKghoSF/idevicerestore_1.0.0-3.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.OXKghoSF/idevicerestore_1.0.0-3.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.OXKghoSF/idevicerestore_1.0.0-3.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.OXKghoSF/b1/idevicerestore_1.0.0-3_armhf.changes /srv/reproducible-results/rbuild-debian/r-b-build.OXKghoSF/b2/idevicerestore_1.0.0-3_armhf.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.382s) 0.382s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.018s) 0.018s 12 calls diffoscope.comparators.binary.FilesystemFile ## specialize (total time: 0.000s) 0.000s 1 call specialize Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 728ms CPU time consumed: 728ms Sun May 5 11:14:16 UTC 2024 I: diffoscope 265 found no differences in the changes files, and a .buildinfo file also exists. Sun May 5 11:14:16 UTC 2024 I: idevicerestore from trixie built successfully and reproducibly on armhf. Sun May 5 11:14:17 UTC 2024 I: Submitting .buildinfo files to external archives: Sun May 5 11:14:17 UTC 2024 I: Submitting 8.0K b1/idevicerestore_1.0.0-3_armhf.buildinfo.asc Sun May 5 11:14:18 UTC 2024 I: Submitting 8.0K b2/idevicerestore_1.0.0-3_armhf.buildinfo.asc Sun May 5 11:14:18 UTC 2024 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Sun May 5 11:14:18 UTC 2024 I: Done submitting .buildinfo files. Sun May 5 11:14:18 UTC 2024 I: Removing signed idevicerestore_1.0.0-3_armhf.buildinfo.asc files: removed './b1/idevicerestore_1.0.0-3_armhf.buildinfo.asc' removed './b2/idevicerestore_1.0.0-3_armhf.buildinfo.asc'