Fri Jun 28 15:34:13 UTC 2024 I: starting to build haproxy-cmd/trixie/armhf on jenkins on '2024-06-28 15:34' Fri Jun 28 15:34:13 UTC 2024 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/armhf_23/3868/console.log Fri Jun 28 15:34:13 UTC 2024 I: Downloading source for trixie/haproxy-cmd=0.0.5 --2024-06-28 15:34:14-- http://deb.debian.org/debian/pool/main/h/haproxy-cmd/haproxy-cmd_0.0.5.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 1838 (1.8K) [text/prs.lines.tag] Saving to: ‘haproxy-cmd_0.0.5.dsc’ 0K . 100% 248M=0s 2024-06-28 15:34:14 (248 MB/s) - ‘haproxy-cmd_0.0.5.dsc’ saved [1838/1838] Fri Jun 28 15:34:14 UTC 2024 I: haproxy-cmd_0.0.5.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Format: 3.0 (native) Source: haproxy-cmd Binary: haproxy-cmd Architecture: all Version: 0.0.5 Maintainer: Debian OpenStack Uploaders: Philippe Seraphin , Thomas Goirand , Homepage: https://salsa.debian.org/openstack-team/third-party/haproxy-cmd Standards-Version: 4.6.1 Vcs-Browser: https://salsa.debian.org/openstack-team/third-party/haproxy-cmd Vcs-Git: https://salsa.debian.org/openstack-team/third-party/haproxy-cmd.git Build-Depends: debhelper-compat (= 11), dh-python, openstack-pkg-tools, python3-all, python3-pbr, python3-setuptools Package-List: haproxy-cmd deb net optional arch=all Checksums-Sha1: eaead6518ebe65ecfaf4e63b603a46012552062b 9852 haproxy-cmd_0.0.5.tar.xz Checksums-Sha256: 4a87ab4525616101790205b2501b7af7dbbd6d5ba2c5e14f7e0b1ac9284e0424 9852 haproxy-cmd_0.0.5.tar.xz Files: 41a62b7ddcce71f1304062f645a25e9a 9852 haproxy-cmd_0.0.5.tar.xz -----BEGIN PGP SIGNATURE----- iQIzBAEBCAAdFiEEoLGp81CJVhMOekJc1BatFaxrQ/4FAmZwRm4ACgkQ1BatFaxr Q/4BqQ/9EgGuM/hFLX18APH5QSMPl73B8TXhVRiDVo//8gA0WeYnCgDMjQPEDugJ s9tiWC4znUCuXOy98hDwlXC/aMJMMBw6jZGVdaCvxntQZEi6WX9jmOfUhVbB/uaf LhYC0OXF350SSSXq2GPIJQSI3NvG0xk7Ck3eSJwWUISCjJeODqNSmKLeV28z8YP5 ck77DXX3LnM6FZIC4coLhuYlhsmT1yjwIOG/sKU3BhnPI/0AvN9UFUWYDUfikEk8 H34TeeRD35/rgQXXM3fXm7GlJqp6aSSDPsAyYJ6vC4N8qkOcrk+2k91w5HoIvidm yloUpWsqnUXPNFR5y4rIeJTaDGJ+kIum60q5hYOjP5tGGaIEncfw836yXMXJWn5p pB4x75n7F7y20awMnYbVHPo7FfXBArzPfspXIuMVZIlBwLgmkRTTjL0tGhxBcxfE H/CQeBoScPw/ZUbG071FuQXRG5UeauN82jrXFbVUGRGMzjr7C1gtUQJNNgvMTXfP fQkkvWPSlMa5UUmPnXyvw4sWatxY1bDywoifIDdhu3lfNrYEtafbW22Rcaiyio1Z sw7LcZJZBKcDKUe4f1KsomLoBRmDlmCd3VB2OxznYYkpImQgl1HeRyy+qCRPlai6 zD9lU6cZxHVWBPaH9GNK8f5D7mYoaJFusHG53A9VSsSqYDf7q7k= =zRKZ -----END PGP SIGNATURE----- Fri Jun 28 15:34:14 UTC 2024 I: Checking whether the package is not for us Fri Jun 28 15:34:14 UTC 2024 I: Starting 1st build on remote node cbxi4b-armhf-rb.debian.net. Fri Jun 28 15:34:14 UTC 2024 I: Preparing to do remote build '1' on cbxi4b-armhf-rb.debian.net. Fri Jun 28 15:40:36 UTC 2024 I: Deleting $TMPDIR on cbxi4b-armhf-rb.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Fri Jun 28 03:34:23 -12 2024 I: pbuilder-time-stamp: 1719588863 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [haproxy-cmd_0.0.5.dsc] I: copying [./haproxy-cmd_0.0.5.tar.xz] I: Extracting source gpgv: Signature made Mon Jun 17 14:21:34 2024 gpgv: using RSA key A0B1A9F3508956130E7A425CD416AD15AC6B43FE gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./haproxy-cmd_0.0.5.dsc: no acceptable signature found dpkg-source: info: extracting haproxy-cmd in haproxy-cmd-0.0.5 dpkg-source: info: unpacking haproxy-cmd_0.0.5.tar.xz I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/31903/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='armhf' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=3 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='armhf' IFS=' ' INVOCATION_ID='003efee54e2e4e1198b02f370cd1a09b' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='31903' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.Q4lo7i9l/pbuilderrc_vcbc --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.Q4lo7i9l/b1 --logfile b1/build.log haproxy-cmd_0.0.5.dsc' SUDO_GID='116' SUDO_UID='112' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://10.0.0.15:3142/' I: uname -a Linux cbxi4b 6.1.0-21-armmp #1 SMP Debian 6.1.90-1 (2024-05-03) armv7l GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Jun 5 22:35 /bin -> usr/bin I: user script /srv/workspace/pbuilder/31903/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: armhf Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 11), dh-python, openstack-pkg-tools, python3-all, python3-pbr, python3-setuptools dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19419 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 11); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on dh-python; however: Package dh-python is not installed. pbuilder-satisfydepends-dummy depends on openstack-pkg-tools; however: Package openstack-pkg-tools is not installed. pbuilder-satisfydepends-dummy depends on python3-all; however: Package python3-all is not installed. pbuilder-satisfydepends-dummy depends on python3-pbr; however: Package python3-pbr is not installed. pbuilder-satisfydepends-dummy depends on python3-setuptools; however: Package python3-setuptools is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} ca-certificates{a} debhelper{a} dh-autoreconf{a} dh-python{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} jq{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1t64{a} libexpat1{a} libfile-stripnondeterminism-perl{a} libicu72{a} libjq1{a} libmagic-mgc{a} libmagic1t64{a} libonig5{a} libpipeline1{a} libpython3-stdlib{a} libpython3.11-minimal{a} libpython3.11-stdlib{a} libpython3.12-minimal{a} libpython3.12-stdlib{a} libreadline8t64{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} media-types{a} netbase{a} openssl{a} openstack-pkg-tools{a} po-debconf{a} python3{a} python3-all{a} python3-distutils{a} python3-lib2to3{a} python3-minimal{a} python3-pbr{a} python3-pip{a} python3-pkg-resources{a} python3-setuptools{a} python3-wheel{a} python3.11{a} python3.11-minimal{a} python3.12{a} python3.12-minimal{a} readline-common{a} sensible-utils{a} tzdata{a} The following packages are RECOMMENDED but will NOT be installed: autopkgtest curl libarchive-cpio-perl libjs-sphinxdoc libltdl-dev libmail-sendmail-perl lynx madison-lite pristine-tar python3-dev wget 0 packages upgraded, 61 newly installed, 0 to remove and 0 not upgraded. Need to get 33.6 MB of archives. After unpacking 129 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main armhf libpython3.11-minimal armhf 3.11.9-1 [805 kB] Get: 2 http://deb.debian.org/debian trixie/main armhf libexpat1 armhf 2.6.2-1 [83.5 kB] Get: 3 http://deb.debian.org/debian trixie/main armhf python3.11-minimal armhf 3.11.9-1 [1600 kB] Get: 4 http://deb.debian.org/debian trixie/main armhf python3-minimal armhf 3.11.8-1 [26.3 kB] Get: 5 http://deb.debian.org/debian trixie/main armhf media-types all 10.1.0 [26.9 kB] Get: 6 http://deb.debian.org/debian trixie/main armhf netbase all 6.4 [12.8 kB] Get: 7 http://deb.debian.org/debian trixie/main armhf tzdata all 2024a-4 [255 kB] Get: 8 http://deb.debian.org/debian trixie/main armhf readline-common all 8.2-4 [69.3 kB] Get: 9 http://deb.debian.org/debian trixie/main armhf libreadline8t64 armhf 8.2-4 [145 kB] Get: 10 http://deb.debian.org/debian trixie/main armhf libpython3.11-stdlib armhf 3.11.9-1 [1704 kB] Get: 11 http://deb.debian.org/debian trixie/main armhf python3.11 armhf 3.11.9-1 [602 kB] Get: 12 http://deb.debian.org/debian trixie/main armhf libpython3-stdlib armhf 3.11.8-1 [9332 B] Get: 13 http://deb.debian.org/debian trixie/main armhf python3 armhf 3.11.8-1 [27.4 kB] Get: 14 http://deb.debian.org/debian trixie/main armhf libpython3.12-minimal armhf 3.12.4-1 [797 kB] Get: 15 http://deb.debian.org/debian trixie/main armhf python3.12-minimal armhf 3.12.4-1 [1779 kB] Get: 16 http://deb.debian.org/debian trixie/main armhf sensible-utils all 0.0.23 [24.7 kB] Get: 17 http://deb.debian.org/debian trixie/main armhf openssl armhf 3.2.2-1 [1329 kB] Get: 18 http://deb.debian.org/debian trixie/main armhf ca-certificates all 20240203 [158 kB] Get: 19 http://deb.debian.org/debian trixie/main armhf libmagic-mgc armhf 1:5.45-3 [314 kB] Get: 20 http://deb.debian.org/debian trixie/main armhf libmagic1t64 armhf 1:5.45-3 [98.1 kB] Get: 21 http://deb.debian.org/debian trixie/main armhf file armhf 1:5.45-3 [42.0 kB] Get: 22 http://deb.debian.org/debian trixie/main armhf gettext-base armhf 0.21-15 [157 kB] Get: 23 http://deb.debian.org/debian trixie/main armhf libuchardet0 armhf 0.0.8-1+b1 [65.7 kB] Get: 24 http://deb.debian.org/debian trixie/main armhf groff-base armhf 1.23.0-4 [1090 kB] Get: 25 http://deb.debian.org/debian trixie/main armhf bsdextrautils armhf 2.40.1-9 [87.8 kB] Get: 26 http://deb.debian.org/debian trixie/main armhf libpipeline1 armhf 1.5.7-2 [33.3 kB] Get: 27 http://deb.debian.org/debian trixie/main armhf man-db armhf 2.12.1-2 [1376 kB] Get: 28 http://deb.debian.org/debian trixie/main armhf m4 armhf 1.4.19-4 [264 kB] Get: 29 http://deb.debian.org/debian trixie/main armhf autoconf all 2.71-3 [332 kB] Get: 30 http://deb.debian.org/debian trixie/main armhf autotools-dev all 20220109.1 [51.6 kB] Get: 31 http://deb.debian.org/debian trixie/main armhf automake all 1:1.16.5-1.3 [823 kB] Get: 32 http://deb.debian.org/debian trixie/main armhf autopoint all 0.21-15 [683 kB] Get: 33 http://deb.debian.org/debian trixie/main armhf libdebhelper-perl all 13.16 [88.6 kB] Get: 34 http://deb.debian.org/debian trixie/main armhf libtool all 2.4.7-7 [517 kB] Get: 35 http://deb.debian.org/debian trixie/main armhf dh-autoreconf all 20 [17.1 kB] Get: 36 http://deb.debian.org/debian trixie/main armhf libarchive-zip-perl all 1.68-1 [104 kB] Get: 37 http://deb.debian.org/debian trixie/main armhf libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get: 38 http://deb.debian.org/debian trixie/main armhf dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get: 39 http://deb.debian.org/debian trixie/main armhf libelf1t64 armhf 0.191-1+b1 [183 kB] Get: 40 http://deb.debian.org/debian trixie/main armhf dwz armhf 0.15-1+b2 [106 kB] Get: 41 http://deb.debian.org/debian trixie/main armhf libicu72 armhf 72.1-4+b1 [9070 kB] Get: 42 http://deb.debian.org/debian trixie/main armhf libxml2 armhf 2.9.14+dfsg-1.3+b3 [598 kB] Get: 43 http://deb.debian.org/debian trixie/main armhf gettext armhf 0.21-15 [1230 kB] Get: 44 http://deb.debian.org/debian trixie/main armhf intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 45 http://deb.debian.org/debian trixie/main armhf po-debconf all 1.0.21+nmu1 [248 kB] Get: 46 http://deb.debian.org/debian trixie/main armhf debhelper all 13.16 [891 kB] Get: 47 http://deb.debian.org/debian trixie/main armhf python3-pkg-resources all 68.1.2-2 [241 kB] Get: 48 http://deb.debian.org/debian trixie/main armhf python3-lib2to3 all 3.12.3-3.1 [77.7 kB] Get: 49 http://deb.debian.org/debian trixie/main armhf python3-distutils all 3.12.3-3.1 [131 kB] Get: 50 http://deb.debian.org/debian trixie/main armhf python3-setuptools all 68.1.2-2 [468 kB] Get: 51 http://deb.debian.org/debian trixie/main armhf dh-python all 6.20240422 [107 kB] Get: 52 http://deb.debian.org/debian trixie/main armhf libonig5 armhf 6.9.9-1 [167 kB] Get: 53 http://deb.debian.org/debian trixie/main armhf libjq1 armhf 1.7.1-3 [155 kB] Get: 54 http://deb.debian.org/debian trixie/main armhf jq armhf 1.7.1-3 [77.4 kB] Get: 55 http://deb.debian.org/debian trixie/main armhf libpython3.12-stdlib armhf 3.12.4-1 [1808 kB] Get: 56 http://deb.debian.org/debian trixie/main armhf python3-wheel all 0.43.0-1 [52.5 kB] Get: 57 http://deb.debian.org/debian trixie/main armhf python3-pip all 24.0+dfsg-2 [1517 kB] Get: 58 http://deb.debian.org/debian trixie/main armhf openstack-pkg-tools all 126 [94.2 kB] Get: 59 http://deb.debian.org/debian trixie/main armhf python3.12 armhf 3.12.4-1 [664 kB] Get: 60 http://deb.debian.org/debian trixie/main armhf python3-all armhf 3.11.8-1 [1056 B] Get: 61 http://deb.debian.org/debian trixie/main armhf python3-pbr all 6.0.0-2 [55.8 kB] Fetched 33.6 MB in 4s (9549 kB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package libpython3.11-minimal:armhf. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19419 files and directories currently installed.) Preparing to unpack .../libpython3.11-minimal_3.11.9-1_armhf.deb ... Unpacking libpython3.11-minimal:armhf (3.11.9-1) ... Selecting previously unselected package libexpat1:armhf. Preparing to unpack .../libexpat1_2.6.2-1_armhf.deb ... Unpacking libexpat1:armhf (2.6.2-1) ... Selecting previously unselected package python3.11-minimal. Preparing to unpack .../python3.11-minimal_3.11.9-1_armhf.deb ... Unpacking python3.11-minimal (3.11.9-1) ... Setting up libpython3.11-minimal:armhf (3.11.9-1) ... Setting up libexpat1:armhf (2.6.2-1) ... Setting up python3.11-minimal (3.11.9-1) ... Selecting previously unselected package python3-minimal. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19735 files and directories currently installed.) Preparing to unpack .../0-python3-minimal_3.11.8-1_armhf.deb ... Unpacking python3-minimal (3.11.8-1) ... Selecting previously unselected package media-types. Preparing to unpack .../1-media-types_10.1.0_all.deb ... Unpacking media-types (10.1.0) ... Selecting previously unselected package netbase. Preparing to unpack .../2-netbase_6.4_all.deb ... Unpacking netbase (6.4) ... Selecting previously unselected package tzdata. Preparing to unpack .../3-tzdata_2024a-4_all.deb ... Unpacking tzdata (2024a-4) ... Selecting previously unselected package readline-common. Preparing to unpack .../4-readline-common_8.2-4_all.deb ... Unpacking readline-common (8.2-4) ... Selecting previously unselected package libreadline8t64:armhf. Preparing to unpack .../5-libreadline8t64_8.2-4_armhf.deb ... Adding 'diversion of /lib/arm-linux-gnueabihf/libhistory.so.8 to /lib/arm-linux-gnueabihf/libhistory.so.8.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/arm-linux-gnueabihf/libhistory.so.8.2 to /lib/arm-linux-gnueabihf/libhistory.so.8.2.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/arm-linux-gnueabihf/libreadline.so.8 to /lib/arm-linux-gnueabihf/libreadline.so.8.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/arm-linux-gnueabihf/libreadline.so.8.2 to /lib/arm-linux-gnueabihf/libreadline.so.8.2.usr-is-merged by libreadline8t64' Unpacking libreadline8t64:armhf (8.2-4) ... Selecting previously unselected package libpython3.11-stdlib:armhf. Preparing to unpack .../6-libpython3.11-stdlib_3.11.9-1_armhf.deb ... Unpacking libpython3.11-stdlib:armhf (3.11.9-1) ... Selecting previously unselected package python3.11. Preparing to unpack .../7-python3.11_3.11.9-1_armhf.deb ... Unpacking python3.11 (3.11.9-1) ... Selecting previously unselected package libpython3-stdlib:armhf. Preparing to unpack .../8-libpython3-stdlib_3.11.8-1_armhf.deb ... Unpacking libpython3-stdlib:armhf (3.11.8-1) ... Setting up python3-minimal (3.11.8-1) ... Selecting previously unselected package python3. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20727 files and directories currently installed.) Preparing to unpack .../00-python3_3.11.8-1_armhf.deb ... Unpacking python3 (3.11.8-1) ... Selecting previously unselected package libpython3.12-minimal:armhf. Preparing to unpack .../01-libpython3.12-minimal_3.12.4-1_armhf.deb ... Unpacking libpython3.12-minimal:armhf (3.12.4-1) ... Selecting previously unselected package python3.12-minimal. Preparing to unpack .../02-python3.12-minimal_3.12.4-1_armhf.deb ... Unpacking python3.12-minimal (3.12.4-1) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../03-sensible-utils_0.0.23_all.deb ... Unpacking sensible-utils (0.0.23) ... Selecting previously unselected package openssl. Preparing to unpack .../04-openssl_3.2.2-1_armhf.deb ... Unpacking openssl (3.2.2-1) ... Selecting previously unselected package ca-certificates. Preparing to unpack .../05-ca-certificates_20240203_all.deb ... Unpacking ca-certificates (20240203) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../06-libmagic-mgc_1%3a5.45-3_armhf.deb ... Unpacking libmagic-mgc (1:5.45-3) ... Selecting previously unselected package libmagic1t64:armhf. Preparing to unpack .../07-libmagic1t64_1%3a5.45-3_armhf.deb ... Unpacking libmagic1t64:armhf (1:5.45-3) ... Selecting previously unselected package file. Preparing to unpack .../08-file_1%3a5.45-3_armhf.deb ... Unpacking file (1:5.45-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../09-gettext-base_0.21-15_armhf.deb ... Unpacking gettext-base (0.21-15) ... Selecting previously unselected package libuchardet0:armhf. Preparing to unpack .../10-libuchardet0_0.0.8-1+b1_armhf.deb ... Unpacking libuchardet0:armhf (0.0.8-1+b1) ... Selecting previously unselected package groff-base. Preparing to unpack .../11-groff-base_1.23.0-4_armhf.deb ... Unpacking groff-base (1.23.0-4) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../12-bsdextrautils_2.40.1-9_armhf.deb ... Unpacking bsdextrautils (2.40.1-9) ... Selecting previously unselected package libpipeline1:armhf. Preparing to unpack .../13-libpipeline1_1.5.7-2_armhf.deb ... Unpacking libpipeline1:armhf (1.5.7-2) ... Selecting previously unselected package man-db. Preparing to unpack .../14-man-db_2.12.1-2_armhf.deb ... Unpacking man-db (2.12.1-2) ... Selecting previously unselected package m4. Preparing to unpack .../15-m4_1.4.19-4_armhf.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../16-autoconf_2.71-3_all.deb ... Unpacking autoconf (2.71-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../17-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../18-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../19-autopoint_0.21-15_all.deb ... Unpacking autopoint (0.21-15) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../20-libdebhelper-perl_13.16_all.deb ... Unpacking libdebhelper-perl (13.16) ... Selecting previously unselected package libtool. Preparing to unpack .../21-libtool_2.4.7-7_all.deb ... Unpacking libtool (2.4.7-7) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../22-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../23-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../24-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../25-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:armhf. Preparing to unpack .../26-libelf1t64_0.191-1+b1_armhf.deb ... Unpacking libelf1t64:armhf (0.191-1+b1) ... Selecting previously unselected package dwz. Preparing to unpack .../27-dwz_0.15-1+b2_armhf.deb ... Unpacking dwz (0.15-1+b2) ... Selecting previously unselected package libicu72:armhf. Preparing to unpack .../28-libicu72_72.1-4+b1_armhf.deb ... Unpacking libicu72:armhf (72.1-4+b1) ... Selecting previously unselected package libxml2:armhf. Preparing to unpack .../29-libxml2_2.9.14+dfsg-1.3+b3_armhf.deb ... Unpacking libxml2:armhf (2.9.14+dfsg-1.3+b3) ... Selecting previously unselected package gettext. Preparing to unpack .../30-gettext_0.21-15_armhf.deb ... Unpacking gettext (0.21-15) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../31-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../32-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../33-debhelper_13.16_all.deb ... Unpacking debhelper (13.16) ... Selecting previously unselected package python3-pkg-resources. Preparing to unpack .../34-python3-pkg-resources_68.1.2-2_all.deb ... Unpacking python3-pkg-resources (68.1.2-2) ... Selecting previously unselected package python3-lib2to3. Preparing to unpack .../35-python3-lib2to3_3.12.3-3.1_all.deb ... Unpacking python3-lib2to3 (3.12.3-3.1) ... Selecting previously unselected package python3-distutils. Preparing to unpack .../36-python3-distutils_3.12.3-3.1_all.deb ... Unpacking python3-distutils (3.12.3-3.1) ... Selecting previously unselected package python3-setuptools. Preparing to unpack .../37-python3-setuptools_68.1.2-2_all.deb ... Unpacking python3-setuptools (68.1.2-2) ... Selecting previously unselected package dh-python. Preparing to unpack .../38-dh-python_6.20240422_all.deb ... Unpacking dh-python (6.20240422) ... Selecting previously unselected package libonig5:armhf. Preparing to unpack .../39-libonig5_6.9.9-1_armhf.deb ... Unpacking libonig5:armhf (6.9.9-1) ... Selecting previously unselected package libjq1:armhf. Preparing to unpack .../40-libjq1_1.7.1-3_armhf.deb ... Unpacking libjq1:armhf (1.7.1-3) ... Selecting previously unselected package jq. Preparing to unpack .../41-jq_1.7.1-3_armhf.deb ... Unpacking jq (1.7.1-3) ... Selecting previously unselected package libpython3.12-stdlib:armhf. Preparing to unpack .../42-libpython3.12-stdlib_3.12.4-1_armhf.deb ... Unpacking libpython3.12-stdlib:armhf (3.12.4-1) ... Selecting previously unselected package python3-wheel. Preparing to unpack .../43-python3-wheel_0.43.0-1_all.deb ... Unpacking python3-wheel (0.43.0-1) ... Selecting previously unselected package python3-pip. Preparing to unpack .../44-python3-pip_24.0+dfsg-2_all.deb ... Unpacking python3-pip (24.0+dfsg-2) ... Selecting previously unselected package openstack-pkg-tools. Preparing to unpack .../45-openstack-pkg-tools_126_all.deb ... Unpacking openstack-pkg-tools (126) ... Selecting previously unselected package python3.12. Preparing to unpack .../46-python3.12_3.12.4-1_armhf.deb ... Unpacking python3.12 (3.12.4-1) ... Selecting previously unselected package python3-all. Preparing to unpack .../47-python3-all_3.11.8-1_armhf.deb ... Unpacking python3-all (3.11.8-1) ... Selecting previously unselected package python3-pbr. Preparing to unpack .../48-python3-pbr_6.0.0-2_all.deb ... Unpacking python3-pbr (6.0.0-2) ... Setting up media-types (10.1.0) ... Setting up libpipeline1:armhf (1.5.7-2) ... Setting up libicu72:armhf (72.1-4+b1) ... Setting up bsdextrautils (2.40.1-9) ... Setting up libmagic-mgc (1:5.45-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.16) ... Setting up libmagic1t64:armhf (1:5.45-3) ... Setting up libpython3.12-minimal:armhf (3.12.4-1) ... Setting up gettext-base (0.21-15) ... Setting up m4 (1.4.19-4) ... Setting up file (1:5.45-3) ... Setting up libelf1t64:armhf (0.191-1+b1) ... Setting up tzdata (2024a-4) ... Current default time zone: 'Etc/UTC' Local time is now: Fri Jun 28 15:36:43 UTC 2024. Universal Time is now: Fri Jun 28 15:36:43 UTC 2024. Run 'dpkg-reconfigure tzdata' if you wish to change it. Setting up autotools-dev (20220109.1) ... Setting up autopoint (0.21-15) ... Setting up autoconf (2.71-3) ... Setting up dwz (0.15-1+b2) ... Setting up sensible-utils (0.0.23) ... Setting up libuchardet0:armhf (0.0.8-1+b1) ... Setting up netbase (6.4) ... Setting up openssl (3.2.2-1) ... Setting up readline-common (8.2-4) ... Setting up libxml2:armhf (2.9.14+dfsg-1.3+b3) ... Setting up libonig5:armhf (6.9.9-1) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up python3.12-minimal (3.12.4-1) ... Setting up gettext (0.21-15) ... Setting up libtool (2.4.7-7) ... Setting up libjq1:armhf (1.7.1-3) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up ca-certificates (20240203) ... Updating certificates in /etc/ssl/certs... 146 added, 0 removed; done. Setting up libreadline8t64:armhf (8.2-4) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up groff-base (1.23.0-4) ... Setting up jq (1.7.1-3) ... Setting up libpython3.12-stdlib:armhf (3.12.4-1) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up libpython3.11-stdlib:armhf (3.11.9-1) ... Setting up python3.12 (3.12.4-1) ... Setting up man-db (2.12.1-2) ... Not building database; man-db/auto-update is not 'true'. Setting up libpython3-stdlib:armhf (3.11.8-1) ... Setting up python3.11 (3.11.9-1) ... Setting up debhelper (13.16) ... Setting up python3 (3.11.8-1) ... Setting up python3-wheel (0.43.0-1) ... Setting up python3-pip (24.0+dfsg-2) ... Setting up python3-lib2to3 (3.12.3-3.1) ... Setting up python3-pkg-resources (68.1.2-2) ... Setting up python3-distutils (3.12.3-3.1) ... python3.12: can't get files for byte-compilation Setting up python3-setuptools (68.1.2-2) ... Setting up python3-pbr (6.0.0-2) ... Setting up python3-all (3.11.8-1) ... Setting up openstack-pkg-tools (126) ... Setting up dh-python (6.20240422) ... Processing triggers for libc-bin (2.38-13) ... Processing triggers for ca-certificates (20240203) ... Updating certificates in /etc/ssl/certs... 0 added, 0 removed; done. Running hooks in /etc/ca-certificates/update.d... done. Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.33-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/reproducible-path/haproxy-cmd-0.0.5/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../haproxy-cmd_0.0.5_source.changes dpkg-buildpackage: info: source package haproxy-cmd dpkg-buildpackage: info: source version 0.0.5 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Thomas Goirand dpkg-source --before-build . dpkg-buildpackage: info: host architecture armhf fakeroot debian/rules clean make: pyversions: No such file or directory py3versions: no X-Python3-Version in control file, using supported versions dh clean --buildsystem=python_distutils --with python3 debian/rules override_dh_auto_clean make[1]: Entering directory '/build/reproducible-path/haproxy-cmd-0.0.5' make[1]: pyversions: No such file or directory py3versions: no X-Python3-Version in control file, using supported versions rm -rf build *.egg-info make[1]: Leaving directory '/build/reproducible-path/haproxy-cmd-0.0.5' dh_autoreconf_clean -O--buildsystem=python_distutils dh_clean -O--buildsystem=python_distutils debian/rules build make: pyversions: No such file or directory py3versions: no X-Python3-Version in control file, using supported versions dh build --buildsystem=python_distutils --with python3 dh_update_autotools_config -O--buildsystem=python_distutils dh_autoreconf -O--buildsystem=python_distutils dh_auto_configure -O--buildsystem=python_distutils dh_auto_configure: warning: Please use the third-party "pybuild" build system instead of python-distutils dh_auto_configure: warning: This feature will be removed in compat 12. debian/rules override_dh_auto_build make[1]: Entering directory '/build/reproducible-path/haproxy-cmd-0.0.5' make[1]: pyversions: No such file or directory py3versions: no X-Python3-Version in control file, using supported versions echo "Do nothing..." Do nothing... make[1]: Leaving directory '/build/reproducible-path/haproxy-cmd-0.0.5' debian/rules override_dh_auto_test make[1]: Entering directory '/build/reproducible-path/haproxy-cmd-0.0.5' make[1]: pyversions: No such file or directory py3versions: no X-Python3-Version in control file, using supported versions echo "Do nothing..." Do nothing... make[1]: Leaving directory '/build/reproducible-path/haproxy-cmd-0.0.5' create-stamp debian/debhelper-build-stamp fakeroot debian/rules binary make: pyversions: No such file or directory py3versions: no X-Python3-Version in control file, using supported versions dh binary --buildsystem=python_distutils --with python3 dh_testroot -O--buildsystem=python_distutils dh_prep -O--buildsystem=python_distutils debian/rules override_dh_auto_install make[1]: Entering directory '/build/reproducible-path/haproxy-cmd-0.0.5' make[1]: pyversions: No such file or directory py3versions: no X-Python3-Version in control file, using supported versions pkgos-dh_auto_install --no-py2 --in-tmp + PKGOS_IN_TMP=no + echo WARNING: --no-py2 is deprecated and always on. WARNING: --no-py2 is deprecated and always on. + shift + PKGOS_IN_TMP=yes + shift + dpkg-parsechangelog -SSource + SRC_PKG_NAME=haproxy-cmd + echo+ sed s/python-// haproxy-cmd + PY_MODULE_NAME=haproxy-cmd + py3versions -vr + PYTHON3S=3.12 3.11 + [ yes = yes ] + TARGET_DIR=tmp + pwd + python3.12 setup.py install --install-layout=deb --root /build/reproducible-path/haproxy-cmd-0.0.5/debian/tmp /usr/lib/python3/dist-packages/setuptools/__init__.py:84: _DeprecatedInstaller: setuptools.installer and fetch_build_eggs are deprecated. !! ******************************************************************************** Requirements should be satisfied by a PEP 517 installer. If you are using pip, you can try `pip install --use-pep517`. ******************************************************************************** !! dist.fetch_build_eggs(dist.setup_requires) /usr/lib/python3/dist-packages/setuptools/command/develop.py:40: EasyInstallDeprecationWarning: easy_install command is deprecated. !! ******************************************************************************** Please avoid running ``setup.py`` and ``easy_install``. Instead, use pypa/build, pypa/installer or other standards-based tools. See https://github.com/pypa/setuptools/issues/917 for details. ******************************************************************************** !! easy_install.initialize_options(self) /usr/lib/python3/dist-packages/setuptools/_distutils/cmd.py:66: SetuptoolsDeprecationWarning: setup.py install is deprecated. !! ******************************************************************************** Please avoid running ``setup.py`` directly. Instead, use pypa/build, pypa/installer or other standards-based tools. See https://blog.ganssle.io/articles/2021/10/setup-py-deprecated.html for details. ******************************************************************************** !! self.initialize_options() running install [pbr] Generating AUTHORS [pbr] AUTHORS complete (0.0s) running build running build_py creating build creating build/lib creating build/lib/haproxy_cmd copying haproxy_cmd/__init__.py -> build/lib/haproxy_cmd copying haproxy_cmd/haproxy_cmd.py -> build/lib/haproxy_cmd running egg_info creating haproxy_cmd.egg-info writing haproxy_cmd.egg-info/PKG-INFO writing dependency_links to haproxy_cmd.egg-info/dependency_links.txt writing entry points to haproxy_cmd.egg-info/entry_points.txt writing top-level names to haproxy_cmd.egg-info/top_level.txt [pbr] Processing SOURCES.txt writing manifest file 'haproxy_cmd.egg-info/SOURCES.txt' warning: no files found matching 'AUTHORS' warning: no files found matching 'ChangeLog' warning: no previously-included files found matching '.gitignore' warning: no previously-included files found matching '.gitreview' warning: no previously-included files matching '*.pyc' found anywhere in distribution adding license file 'LICENSE' writing manifest file 'haproxy_cmd.egg-info/SOURCES.txt' running install_lib creating /build/reproducible-path/haproxy-cmd-0.0.5/debian/tmp creating /build/reproducible-path/haproxy-cmd-0.0.5/debian/tmp/usr creating /build/reproducible-path/haproxy-cmd-0.0.5/debian/tmp/usr/lib creating /build/reproducible-path/haproxy-cmd-0.0.5/debian/tmp/usr/lib/python3 creating /build/reproducible-path/haproxy-cmd-0.0.5/debian/tmp/usr/lib/python3/dist-packages creating /build/reproducible-path/haproxy-cmd-0.0.5/debian/tmp/usr/lib/python3/dist-packages/haproxy_cmd copying build/lib/haproxy_cmd/__init__.py -> /build/reproducible-path/haproxy-cmd-0.0.5/debian/tmp/usr/lib/python3/dist-packages/haproxy_cmd copying build/lib/haproxy_cmd/haproxy_cmd.py -> /build/reproducible-path/haproxy-cmd-0.0.5/debian/tmp/usr/lib/python3/dist-packages/haproxy_cmd byte-compiling /build/reproducible-path/haproxy-cmd-0.0.5/debian/tmp/usr/lib/python3/dist-packages/haproxy_cmd/__init__.py to __init__.cpython-312.pyc byte-compiling /build/reproducible-path/haproxy-cmd-0.0.5/debian/tmp/usr/lib/python3/dist-packages/haproxy_cmd/haproxy_cmd.py to haproxy_cmd.cpython-312.pyc /usr/lib/python3/dist-packages/haproxy_cmd/haproxy_cmd.py:234: SyntaxWarning: invalid escape sequence '\K' running install_egg_info Copying haproxy_cmd.egg-info to /build/reproducible-path/haproxy-cmd-0.0.5/debian/tmp/usr/lib/python3/dist-packages/haproxy_cmd-0.0.5.egg-info Skipping SOURCES.txt running install_scripts Installing hapc script to /build/reproducible-path/haproxy-cmd-0.0.5/debian/tmp/usr/bin + pwd + python3.11 setup.py install --install-layout=deb --root /build/reproducible-path/haproxy-cmd-0.0.5/debian/tmp /usr/lib/python3/dist-packages/setuptools/__init__.py:84: _DeprecatedInstaller: setuptools.installer and fetch_build_eggs are deprecated. !! ******************************************************************************** Requirements should be satisfied by a PEP 517 installer. If you are using pip, you can try `pip install --use-pep517`. ******************************************************************************** !! dist.fetch_build_eggs(dist.setup_requires) /usr/lib/python3/dist-packages/setuptools/command/develop.py:40: EasyInstallDeprecationWarning: easy_install command is deprecated. !! ******************************************************************************** Please avoid running ``setup.py`` and ``easy_install``. Instead, use pypa/build, pypa/installer or other standards-based tools. See https://github.com/pypa/setuptools/issues/917 for details. ******************************************************************************** !! easy_install.initialize_options(self) /usr/lib/python3/dist-packages/setuptools/_distutils/cmd.py:66: SetuptoolsDeprecationWarning: setup.py install is deprecated. !! ******************************************************************************** Please avoid running ``setup.py`` directly. Instead, use pypa/build, pypa/installer or other standards-based tools. See https://blog.ganssle.io/articles/2021/10/setup-py-deprecated.html for details. ******************************************************************************** !! self.initialize_options() running install [pbr] Generating AUTHORS [pbr] AUTHORS complete (0.0s) running build running build_py running egg_info writing haproxy_cmd.egg-info/PKG-INFO writing dependency_links to haproxy_cmd.egg-info/dependency_links.txt writing entry points to haproxy_cmd.egg-info/entry_points.txt writing top-level names to haproxy_cmd.egg-info/top_level.txt [pbr] Reusing existing SOURCES.txt running install_lib byte-compiling /build/reproducible-path/haproxy-cmd-0.0.5/debian/tmp/usr/lib/python3/dist-packages/haproxy_cmd/__init__.py to __init__.cpython-311.pyc byte-compiling /build/reproducible-path/haproxy-cmd-0.0.5/debian/tmp/usr/lib/python3/dist-packages/haproxy_cmd/haproxy_cmd.py to haproxy_cmd.cpython-311.pyc running install_egg_info removing '/build/reproducible-path/haproxy-cmd-0.0.5/debian/tmp/usr/lib/python3/dist-packages/haproxy_cmd-0.0.5.egg-info' (and everything under it) Copying haproxy_cmd.egg-info to /build/reproducible-path/haproxy-cmd-0.0.5/debian/tmp/usr/lib/python3/dist-packages/haproxy_cmd-0.0.5.egg-info Skipping SOURCES.txt running install_scripts Installing hapc script to /build/reproducible-path/haproxy-cmd-0.0.5/debian/tmp/usr/bin + pwd + rm -rf /build/reproducible-path/haproxy-cmd-0.0.5/debian/python*/usr/lib/python*/dist-packages/*.pth + pwd + rm -rf /build/reproducible-path/haproxy-cmd-0.0.5/debian/tmp/usr/lib/python*/dist-packages/*.pth make[1]: Leaving directory '/build/reproducible-path/haproxy-cmd-0.0.5' dh_install -O--buildsystem=python_distutils dh_installdocs -O--buildsystem=python_distutils debian/rules override_dh_installchangelogs make[1]: Entering directory '/build/reproducible-path/haproxy-cmd-0.0.5' make[1]: pyversions: No such file or directory py3versions: no X-Python3-Version in control file, using supported versions if [ -e /build/reproducible-path/haproxy-cmd-0.0.5/debian/CHANGELOG ] ; then \ dh_installchangelogs /build/reproducible-path/haproxy-cmd-0.0.5/debian/CHANGELOG ; \ else \ dh_installchangelogs ; \ fi make[1]: Leaving directory '/build/reproducible-path/haproxy-cmd-0.0.5' dh_installman -O--buildsystem=python_distutils debian/rules override_dh_python3 make[1]: Entering directory '/build/reproducible-path/haproxy-cmd-0.0.5' make[1]: pyversions: No such file or directory py3versions: no X-Python3-Version in control file, using supported versions dh_python3 --shebang=/usr/bin/python3 I: dh_python3 tools:113: replacing shebang in debian/haproxy-cmd/usr/bin/hapc dh_python3 --shebang=/usr/bin/python3 /usr/bin I: dh_python3 tools:113: replacing shebang in debian/haproxy-cmd/usr/bin/hapc make[1]: Leaving directory '/build/reproducible-path/haproxy-cmd-0.0.5' debian/rules override_dh_installinit make[1]: Entering directory '/build/reproducible-path/haproxy-cmd-0.0.5' make[1]: pyversions: No such file or directory py3versions: no X-Python3-Version in control file, using supported versions # Create the init scripts and systemd unit files from the template set -e ; set -x ; for i in `ls -1 debian/*.init.in` ; do \ MYINIT=`echo $i | sed s/.init.in//` ; \ cp $i $MYINIT.init ; \ cat /usr/share/openstack-pkg-tools/init-script-template >>$MYINIT.init ; \ pkgos-gen-systemd-unit $i ; \ done + ls -1 debian/*.init.in ls: cannot access 'debian/*.init.in': No such file or directory # If there's a service.in file, use that one instead of the generated one set -e ; set -x ; for i in `ls -1 debian/*.service.in`; do \ MYPKG=`echo $i | sed s/.service.in//` ; \ cp $MYPKG.service.in $MYPKG.service ; \ done + ls -1 debian/*.service.in ls: cannot access 'debian/*.service.in': No such file or directory # Generate the systemd unit if there's no already existing .service.in set -e ; set -x ; for i in `ls debian/*.init.in` ; do \ MYINIT=`echo $i | sed s/.init.in/.service.in/` ; \ if ! [ -e $MYINIT ] ; then \ pkgos-gen-systemd-unit $i ; \ fi \ done + ls debian/*.init.in ls: cannot access 'debian/*.init.in': No such file or directory dh_installinit --error-handler=true make[1]: Leaving directory '/build/reproducible-path/haproxy-cmd-0.0.5' debian/rules override_dh_installsystemd make[1]: Entering directory '/build/reproducible-path/haproxy-cmd-0.0.5' make[1]: pyversions: No such file or directory py3versions: no X-Python3-Version in control file, using supported versions # Create the init scripts and systemd unit files from the template set -e ; set -x ; for i in `ls -1 debian/*.init.in` ; do \ MYINIT=`echo $i | sed s/.init.in//` ; \ cp $i $MYINIT.init ; \ cat /usr/share/openstack-pkg-tools/init-script-template >>$MYINIT.init ; \ pkgos-gen-systemd-unit $i ; \ done + ls -1 debian/*.init.in ls: cannot access 'debian/*.init.in': No such file or directory # If there's a service.in file, use that one instead of the generated one set -e ; set -x ; for i in `ls -1 debian/*.service.in`; do \ MYPKG=`echo $i | sed s/.service.in//` ; \ cp $MYPKG.service.in $MYPKG.service ; \ done + ls -1 debian/*.service.in ls: cannot access 'debian/*.service.in': No such file or directory # Generate the systemd unit if there's no already existing .service.in set -e ; set -x ; for i in `ls debian/*.init.in` ; do \ MYINIT=`echo $i | sed s/.init.in/.service.in/` ; \ if ! [ -e $MYINIT ] ; then \ pkgos-gen-systemd-unit $i ; \ fi \ done + ls debian/*.init.in ls: cannot access 'debian/*.init.in': No such file or directory dh_installsystemd make[1]: Leaving directory '/build/reproducible-path/haproxy-cmd-0.0.5' dh_perl -O--buildsystem=python_distutils dh_link -O--buildsystem=python_distutils dh_strip_nondeterminism -O--buildsystem=python_distutils dh_compress -O--buildsystem=python_distutils dh_fixperms -O--buildsystem=python_distutils dh_missing -O--buildsystem=python_distutils dh_installdeb -O--buildsystem=python_distutils debian/rules override_dh_gencontrol make[1]: Entering directory '/build/reproducible-path/haproxy-cmd-0.0.5' make[1]: pyversions: No such file or directory py3versions: no X-Python3-Version in control file, using supported versions if dpkg-vendor --derives-from ubuntu ; then \ dh_gencontrol -- -T/build/reproducible-path/haproxy-cmd-0.0.5/debian/ubuntu_control_vars ; \ else \ dh_gencontrol -- -T/build/reproducible-path/haproxy-cmd-0.0.5/debian/debian_control_vars ; \ fi make[1]: Leaving directory '/build/reproducible-path/haproxy-cmd-0.0.5' dh_md5sums -O--buildsystem=python_distutils dh_builddeb -O--buildsystem=python_distutils dpkg-deb: building package 'haproxy-cmd' in '../haproxy-cmd_0.0.5_all.deb'. dpkg-genbuildinfo --build=binary -O../haproxy-cmd_0.0.5_armhf.buildinfo dpkg-genchanges --build=binary -O../haproxy-cmd_0.0.5_armhf.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: including full source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/31903 and its subdirectories I: Current time: Fri Jun 28 03:40:31 -12 2024 I: pbuilder-time-stamp: 1719589231 Fri Jun 28 15:40:39 UTC 2024 I: 1st build successful. Starting 2nd build on remote node ff64a-armhf-rb.debian.net. Fri Jun 28 15:40:39 UTC 2024 I: Preparing to do remote build '2' on ff64a-armhf-rb.debian.net. Fri Jun 28 15:48:48 UTC 2024 I: Deleting $TMPDIR on ff64a-armhf-rb.debian.net. Fri Jun 28 15:48:51 UTC 2024 I: haproxy-cmd_0.0.5_armhf.changes: Format: 1.8 Date: Mon, 17 Jun 2024 16:19:03 +0200 Source: haproxy-cmd Binary: haproxy-cmd Architecture: all Version: 0.0.5 Distribution: unstable Urgency: medium Maintainer: Debian OpenStack Changed-By: Thomas Goirand Description: haproxy-cmd - command line utility to control backends of haproxy Changes: haproxy-cmd (0.0.5) unstable; urgency=medium . [ Gregory Duchatelet ] * Fetch admin socket path by parsing haproxy.cfg. Checksums-Sha1: 270d2a56a232751b92de4a8a9cbbd86a6f99b39e 8140 haproxy-cmd_0.0.5_all.deb 7a79600f137e318ff31c4113206d7760e635dcd2 5578 haproxy-cmd_0.0.5_armhf.buildinfo Checksums-Sha256: 8b79f00d44804bf71579b2623215d783650bfc7a09ba34ff14d7e8e3c86fca13 8140 haproxy-cmd_0.0.5_all.deb 0e72c568bf4d12cb72bceddcf367e881f2785a18d9d59122312167518cfc95d1 5578 haproxy-cmd_0.0.5_armhf.buildinfo Files: 54b1ad20df6af44c2e8bed8c4cdce8d8 8140 net optional haproxy-cmd_0.0.5_all.deb 4f1275e4dc4f801cddf9111d85df417b 5578 net optional haproxy-cmd_0.0.5_armhf.buildinfo Fri Jun 28 15:48:52 UTC 2024 I: diffoscope 271 will be used to compare the two builds: Running as unit: rb-diffoscope-armhf_23-3868.service Warning: program compiled against libxml 212 using older 209 # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.Q4lo7i9l/haproxy-cmd_0.0.5.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.Q4lo7i9l/haproxy-cmd_0.0.5.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.Q4lo7i9l/haproxy-cmd_0.0.5.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.Q4lo7i9l/b1/haproxy-cmd_0.0.5_armhf.changes /srv/reproducible-results/rbuild-debian/r-b-build.Q4lo7i9l/b2/haproxy-cmd_0.0.5_armhf.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.347s) 0.346s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.015s) 0.015s 12 calls diffoscope.comparators.binary.FilesystemFile ## specialize (total time: 0.000s) 0.000s 1 call specialize Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 661ms CPU time consumed: 663ms Fri Jun 28 15:48:53 UTC 2024 I: diffoscope 271 found no differences in the changes files, and a .buildinfo file also exists. Fri Jun 28 15:48:53 UTC 2024 I: haproxy-cmd from trixie built successfully and reproducibly on armhf. Fri Jun 28 15:48:54 UTC 2024 I: Submitting .buildinfo files to external archives: Fri Jun 28 15:48:54 UTC 2024 I: Submitting 8.0K b1/haproxy-cmd_0.0.5_armhf.buildinfo.asc Fri Jun 28 15:48:55 UTC 2024 I: Submitting 8.0K b2/haproxy-cmd_0.0.5_armhf.buildinfo.asc Fri Jun 28 15:48:55 UTC 2024 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Fri Jun 28 15:48:55 UTC 2024 I: Done submitting .buildinfo files. Fri Jun 28 15:48:55 UTC 2024 I: Removing signed haproxy-cmd_0.0.5_armhf.buildinfo.asc files: removed './b1/haproxy-cmd_0.0.5_armhf.buildinfo.asc' removed './b2/haproxy-cmd_0.0.5_armhf.buildinfo.asc'