Sun Apr 14 21:27:56 UTC 2024 I: starting to build ekeyd/trixie/armhf on jenkins on '2024-04-14 21:27' Sun Apr 14 21:27:56 UTC 2024 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/armhf_6/3097/console.log Sun Apr 14 21:27:56 UTC 2024 I: Downloading source for trixie/ekeyd=1.1.5-6.3 --2024-04-14 21:27:56-- http://deb.debian.org/debian/pool/main/e/ekeyd/ekeyd_1.1.5-6.3.dsc Connecting to 78.137.99.97:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 1835 (1.8K) [text/prs.lines.tag] Saving to: ‘ekeyd_1.1.5-6.3.dsc’ 0K . 100% 168M=0s 2024-04-14 21:27:56 (168 MB/s) - ‘ekeyd_1.1.5-6.3.dsc’ saved [1835/1835] Sun Apr 14 21:27:56 UTC 2024 I: ekeyd_1.1.5-6.3.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Format: 3.0 (quilt) Source: ekeyd Binary: ekeyd, ekeyd-egd-linux Architecture: any Version: 1.1.5-6.3 Maintainer: Simtec Electronics Uploaders: Vincent Sanders Standards-Version: 3.9.3 Build-Depends: debhelper-compat (= 13), lua5.1, liblua5.1-dev | liblua5.1-0-dev, pkgconf, systemd-dev Package-List: ekeyd deb utils optional arch=any ekeyd-egd-linux deb utils optional arch=linux-any Checksums-Sha1: 036e1e69127a3751f62fffb2221ff2d0738aef99 101366 ekeyd_1.1.5.orig.tar.gz b84bbd62985a0d17587a26a8e2f6ec52caed4728 8788 ekeyd_1.1.5-6.3.debian.tar.xz Checksums-Sha256: 4aa8abe4bd8bb4517be3f751a75ae270ac2855ba4ba465099a3f29a2c8602ec4 101366 ekeyd_1.1.5.orig.tar.gz bc681be2d76223b66deb262a0df4b258f4e010ab4c40882ced0304012d1ca422 8788 ekeyd_1.1.5-6.3.debian.tar.xz Files: 020b67ed8fae4324099269e2106ac96e 101366 ekeyd_1.1.5.orig.tar.gz 7cc79736adf36953a6d7000606414819 8788 ekeyd_1.1.5-6.3.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQIzBAEBCAAdFiEEfRrP+tnggGycTNOSXBPW25MFLgMFAmVyVrUACgkQXBPW25MF LgPB0Q/9FN3TkW7b5tMW5GGUKzwY3ONS8sTTxpNcY2t7jGJCWX7ZbraPcHwQkDf2 pCXZp6NXYE7+W/AwdmdL52vil7G9VlZ0F+MBN3hc8rruiTTRXa3WpqKfD8mkcSaj Zst4yRzEeIplfJ6+HLHAmFBwB+z4h2nuiIW9RYtfvO28oxuYTnQqIa5ZXieHNuOA Jrwc0fa7iVAsnzcORyqjCu/WXV0Gp9/HlZNx/JXtvBOWUG+q/6FpQf2GadjJGOXW iEjJ+Q3OI2ZmndB3OszE6y6o435bwQNxc5Gtfbk9AYzuRxyL6CEqUvyO6gWReXAM 5OuLGVEkaoqfL79Hm/fIJ4gWewnGyfHILSwr5fisopCaxrV8yjYuoS6CCilvwqV7 jnfrZy1j/NfA1Fs3AUT5PdYtX7pKXVZpaIgM+7IF3Pg0wQ+P+M02bkzyacZbjzQc x2UtuOc69VTh5XKrRY60Sr2FHqiqe/y5GlcLR9bylRw7Hs0P9ZtIQW3Zg2oYjvcN HOymex4KYUYeuWn0NEzJG635zOBeGHH/SlSwWarnTf/qrqrb1ktVkBayAl7q0jpC 8B7VJ4+yeqqTmAdOgIcRQR56tV3QU+b4Wck7rulM1Wh/Ogte0pl73d0WMhwq87zD lFLgN8HXyrdpCXd24sKhWu1LMuFFKhxezE5EPcN1J4pjEryVMEk= =pb9R -----END PGP SIGNATURE----- Sun Apr 14 21:27:56 UTC 2024 I: Checking whether the package is not for us Sun Apr 14 21:27:56 UTC 2024 I: Starting 1st build on remote node virt64b-armhf-rb.debian.net. Sun Apr 14 21:27:57 UTC 2024 I: Preparing to do remote build '1' on virt64b-armhf-rb.debian.net. Sun Apr 14 21:30:26 UTC 2024 I: Deleting $TMPDIR on virt64b-armhf-rb.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Sun Apr 14 09:28:07 -12 2024 I: pbuilder-time-stamp: 1713130087 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [ekeyd_1.1.5-6.3.dsc] I: copying [./ekeyd_1.1.5.orig.tar.gz] I: copying [./ekeyd_1.1.5-6.3.debian.tar.xz] I: Extracting source gpgv: Signature made Thu Dec 7 23:35:17 2023 gpgv: using RSA key 7D1ACFFAD9E0806C9C4CD3925C13D6DB93052E03 gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./ekeyd_1.1.5-6.3.dsc: no acceptable signature found dpkg-source: info: extracting ekeyd in ekeyd-1.1.5 dpkg-source: info: unpacking ekeyd_1.1.5.orig.tar.gz dpkg-source: info: unpacking ekeyd_1.1.5-6.3.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying harden-egd.patch dpkg-source: info: applying versionfix.patch dpkg-source: info: applying 718106-makefile-fix.patch dpkg-source: info: applying Fix-compatibility-with-changed-UNIX-socket-API.patch I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/21469/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='armhf' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=3 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='armhf' IFS=' ' INVOCATION_ID='86f108693a7940ffb3c33d0ef206843e' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='21469' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.am617zlj/pbuilderrc_79Kv --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.am617zlj/b1 --logfile b1/build.log ekeyd_1.1.5-6.3.dsc' SUDO_GID='113' SUDO_UID='107' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://10.0.0.15:3142/' I: uname -a Linux virt64b 6.1.0-20-arm64 #1 SMP Debian 6.1.85-1 (2024-04-11) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Apr 14 11:24 /bin -> usr/bin I: user script /srv/workspace/pbuilder/21469/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: armhf Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), lua5.1, liblua5.1-dev | liblua5.1-0-dev, pkgconf, systemd-dev dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19635 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on lua5.1; however: Package lua5.1 is not installed. pbuilder-satisfydepends-dummy depends on liblua5.1-dev | liblua5.1-0-dev; however: Package liblua5.1-dev is not installed. Package liblua5.1-0-dev is not installed. pbuilder-satisfydepends-dummy depends on pkgconf; however: Package pkgconf is not installed. pbuilder-satisfydepends-dummy depends on systemd-dev; however: Package systemd-dev is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1{a} libfile-stripnondeterminism-perl{a} libicu72{a} liblua5.1-0{a} liblua5.1-0-dev{a} libmagic-mgc{a} libmagic1{a} libncurses-dev{a} libncurses6{a} libpipeline1{a} libpkgconf3{a} libreadline-dev{a} libreadline8{a} libsub-override-perl{a} libtool{a} libuchardet0{a} libxml2{a} lua5.1{a} m4{a} man-db{a} pkgconf{a} pkgconf-bin{a} po-debconf{a} readline-common{a} sensible-utils{a} systemd-dev{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libgpm2 libltdl-dev libmail-sendmail-perl libtool-bin lynx wget 0 packages upgraded, 42 newly installed, 0 to remove and 0 not upgraded. Need to get 19.5 MB of archives. After unpacking 73.2 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main armhf readline-common all 8.2-3 [69.1 kB] Get: 2 http://deb.debian.org/debian trixie/main armhf sensible-utils all 0.0.22 [22.4 kB] Get: 3 http://deb.debian.org/debian trixie/main armhf libmagic-mgc armhf 1:5.45-2+b1 [314 kB] Get: 4 http://deb.debian.org/debian trixie/main armhf libmagic1 armhf 1:5.45-2+b1 [97.9 kB] Get: 5 http://deb.debian.org/debian trixie/main armhf file armhf 1:5.45-2+b1 [42.2 kB] Get: 6 http://deb.debian.org/debian trixie/main armhf gettext-base armhf 0.21-14+b1 [157 kB] Get: 7 http://deb.debian.org/debian trixie/main armhf libuchardet0 armhf 0.0.8-1+b1 [65.7 kB] Get: 8 http://deb.debian.org/debian trixie/main armhf groff-base armhf 1.23.0-3 [1088 kB] Get: 9 http://deb.debian.org/debian trixie/main armhf bsdextrautils armhf 2.39.3-6 [81.2 kB] Get: 10 http://deb.debian.org/debian trixie/main armhf libpipeline1 armhf 1.5.7-2 [33.3 kB] Get: 11 http://deb.debian.org/debian trixie/main armhf man-db armhf 2.12.0-3 [1367 kB] Get: 12 http://deb.debian.org/debian trixie/main armhf m4 armhf 1.4.19-4 [264 kB] Get: 13 http://deb.debian.org/debian trixie/main armhf autoconf all 2.71-3 [332 kB] Get: 14 http://deb.debian.org/debian trixie/main armhf autotools-dev all 20220109.1 [51.6 kB] Get: 15 http://deb.debian.org/debian trixie/main armhf automake all 1:1.16.5-1.3 [823 kB] Get: 16 http://deb.debian.org/debian trixie/main armhf autopoint all 0.21-14 [496 kB] Get: 17 http://deb.debian.org/debian trixie/main armhf libdebhelper-perl all 13.15.3 [88.0 kB] Get: 18 http://deb.debian.org/debian trixie/main armhf libtool all 2.4.7-7 [517 kB] Get: 19 http://deb.debian.org/debian trixie/main armhf dh-autoreconf all 20 [17.1 kB] Get: 20 http://deb.debian.org/debian trixie/main armhf libarchive-zip-perl all 1.68-1 [104 kB] Get: 21 http://deb.debian.org/debian trixie/main armhf libsub-override-perl all 0.10-1 [10.6 kB] Get: 22 http://deb.debian.org/debian trixie/main armhf libfile-stripnondeterminism-perl all 1.13.1-1 [19.4 kB] Get: 23 http://deb.debian.org/debian trixie/main armhf dh-strip-nondeterminism all 1.13.1-1 [8620 B] Get: 24 http://deb.debian.org/debian trixie/main armhf libelf1 armhf 0.190-1+b1 [171 kB] Get: 25 http://deb.debian.org/debian trixie/main armhf dwz armhf 0.15-1 [101 kB] Get: 26 http://deb.debian.org/debian trixie/main armhf libicu72 armhf 72.1-4+b1 [9070 kB] Get: 27 http://deb.debian.org/debian trixie/main armhf libxml2 armhf 2.9.14+dfsg-1.3+b2 [599 kB] Get: 28 http://deb.debian.org/debian trixie/main armhf gettext armhf 0.21-14+b1 [1230 kB] Get: 29 http://deb.debian.org/debian trixie/main armhf intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 30 http://deb.debian.org/debian trixie/main armhf po-debconf all 1.0.21+nmu1 [248 kB] Get: 31 http://deb.debian.org/debian trixie/main armhf debhelper all 13.15.3 [901 kB] Get: 32 http://deb.debian.org/debian trixie/main armhf liblua5.1-0 armhf 5.1.5-9+b1 [86.7 kB] Get: 33 http://deb.debian.org/debian trixie/main armhf libreadline8 armhf 8.2-3+b1 [144 kB] Get: 34 http://deb.debian.org/debian trixie/main armhf libncurses6 armhf 6.4+20240113-1 [81.8 kB] Get: 35 http://deb.debian.org/debian trixie/main armhf libncurses-dev armhf 6.4+20240113-1 [309 kB] Get: 36 http://deb.debian.org/debian trixie/main armhf libreadline-dev armhf 8.2-3+b1 [137 kB] Get: 37 http://deb.debian.org/debian trixie/main armhf liblua5.1-0-dev armhf 5.1.5-9+b1 [122 kB] Get: 38 http://deb.debian.org/debian trixie/main armhf libpkgconf3 armhf 1.8.1-1+b2 [31.9 kB] Get: 39 http://deb.debian.org/debian trixie/main armhf lua5.1 armhf 5.1.5-9+b1 [81.2 kB] Get: 40 http://deb.debian.org/debian trixie/main armhf pkgconf-bin armhf 1.8.1-1+b2 [28.9 kB] Get: 41 http://deb.debian.org/debian trixie/main armhf pkgconf armhf 1.8.1-1+b2 [26.2 kB] Get: 42 http://deb.debian.org/debian trixie/main armhf systemd-dev all 255.4-1 [59.7 kB] Fetched 19.5 MB in 1s (19.6 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package readline-common. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19635 files and directories currently installed.) Preparing to unpack .../00-readline-common_8.2-3_all.deb ... Unpacking readline-common (8.2-3) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../01-sensible-utils_0.0.22_all.deb ... Unpacking sensible-utils (0.0.22) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../02-libmagic-mgc_1%3a5.45-2+b1_armhf.deb ... Unpacking libmagic-mgc (1:5.45-2+b1) ... Selecting previously unselected package libmagic1:armhf. Preparing to unpack .../03-libmagic1_1%3a5.45-2+b1_armhf.deb ... Unpacking libmagic1:armhf (1:5.45-2+b1) ... Selecting previously unselected package file. Preparing to unpack .../04-file_1%3a5.45-2+b1_armhf.deb ... Unpacking file (1:5.45-2+b1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../05-gettext-base_0.21-14+b1_armhf.deb ... Unpacking gettext-base (0.21-14+b1) ... Selecting previously unselected package libuchardet0:armhf. Preparing to unpack .../06-libuchardet0_0.0.8-1+b1_armhf.deb ... Unpacking libuchardet0:armhf (0.0.8-1+b1) ... Selecting previously unselected package groff-base. Preparing to unpack .../07-groff-base_1.23.0-3_armhf.deb ... Unpacking groff-base (1.23.0-3) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../08-bsdextrautils_2.39.3-6_armhf.deb ... Unpacking bsdextrautils (2.39.3-6) ... Selecting previously unselected package libpipeline1:armhf. Preparing to unpack .../09-libpipeline1_1.5.7-2_armhf.deb ... Unpacking libpipeline1:armhf (1.5.7-2) ... Selecting previously unselected package man-db. Preparing to unpack .../10-man-db_2.12.0-3_armhf.deb ... Unpacking man-db (2.12.0-3) ... Selecting previously unselected package m4. Preparing to unpack .../11-m4_1.4.19-4_armhf.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../12-autoconf_2.71-3_all.deb ... Unpacking autoconf (2.71-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../13-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../14-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../15-autopoint_0.21-14_all.deb ... Unpacking autopoint (0.21-14) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../16-libdebhelper-perl_13.15.3_all.deb ... Unpacking libdebhelper-perl (13.15.3) ... Selecting previously unselected package libtool. Preparing to unpack .../17-libtool_2.4.7-7_all.deb ... Unpacking libtool (2.4.7-7) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../18-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../19-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libsub-override-perl. Preparing to unpack .../20-libsub-override-perl_0.10-1_all.deb ... Unpacking libsub-override-perl (0.10-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../21-libfile-stripnondeterminism-perl_1.13.1-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.13.1-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../22-dh-strip-nondeterminism_1.13.1-1_all.deb ... Unpacking dh-strip-nondeterminism (1.13.1-1) ... Selecting previously unselected package libelf1:armhf. Preparing to unpack .../23-libelf1_0.190-1+b1_armhf.deb ... Unpacking libelf1:armhf (0.190-1+b1) ... Selecting previously unselected package dwz. Preparing to unpack .../24-dwz_0.15-1_armhf.deb ... Unpacking dwz (0.15-1) ... Selecting previously unselected package libicu72:armhf. Preparing to unpack .../25-libicu72_72.1-4+b1_armhf.deb ... Unpacking libicu72:armhf (72.1-4+b1) ... Selecting previously unselected package libxml2:armhf. Preparing to unpack .../26-libxml2_2.9.14+dfsg-1.3+b2_armhf.deb ... Unpacking libxml2:armhf (2.9.14+dfsg-1.3+b2) ... Selecting previously unselected package gettext. Preparing to unpack .../27-gettext_0.21-14+b1_armhf.deb ... Unpacking gettext (0.21-14+b1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../28-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../29-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../30-debhelper_13.15.3_all.deb ... Unpacking debhelper (13.15.3) ... Selecting previously unselected package liblua5.1-0:armhf. Preparing to unpack .../31-liblua5.1-0_5.1.5-9+b1_armhf.deb ... Unpacking liblua5.1-0:armhf (5.1.5-9+b1) ... Selecting previously unselected package libreadline8:armhf. Preparing to unpack .../32-libreadline8_8.2-3+b1_armhf.deb ... Unpacking libreadline8:armhf (8.2-3+b1) ... Selecting previously unselected package libncurses6:armhf. Preparing to unpack .../33-libncurses6_6.4+20240113-1_armhf.deb ... Unpacking libncurses6:armhf (6.4+20240113-1) ... Selecting previously unselected package libncurses-dev:armhf. Preparing to unpack .../34-libncurses-dev_6.4+20240113-1_armhf.deb ... Unpacking libncurses-dev:armhf (6.4+20240113-1) ... Selecting previously unselected package libreadline-dev:armhf. Preparing to unpack .../35-libreadline-dev_8.2-3+b1_armhf.deb ... Unpacking libreadline-dev:armhf (8.2-3+b1) ... Selecting previously unselected package liblua5.1-0-dev:armhf. Preparing to unpack .../36-liblua5.1-0-dev_5.1.5-9+b1_armhf.deb ... Unpacking liblua5.1-0-dev:armhf (5.1.5-9+b1) ... Selecting previously unselected package libpkgconf3:armhf. Preparing to unpack .../37-libpkgconf3_1.8.1-1+b2_armhf.deb ... Unpacking libpkgconf3:armhf (1.8.1-1+b2) ... Selecting previously unselected package lua5.1. Preparing to unpack .../38-lua5.1_5.1.5-9+b1_armhf.deb ... Unpacking lua5.1 (5.1.5-9+b1) ... Selecting previously unselected package pkgconf-bin. Preparing to unpack .../39-pkgconf-bin_1.8.1-1+b2_armhf.deb ... Unpacking pkgconf-bin (1.8.1-1+b2) ... Selecting previously unselected package pkgconf:armhf. Preparing to unpack .../40-pkgconf_1.8.1-1+b2_armhf.deb ... Unpacking pkgconf:armhf (1.8.1-1+b2) ... Selecting previously unselected package systemd-dev. Preparing to unpack .../41-systemd-dev_255.4-1_all.deb ... Unpacking systemd-dev (255.4-1) ... Setting up libpipeline1:armhf (1.5.7-2) ... Setting up libicu72:armhf (72.1-4+b1) ... Setting up bsdextrautils (2.39.3-6) ... Setting up libmagic-mgc (1:5.45-2+b1) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.15.3) ... Setting up libmagic1:armhf (1:5.45-2+b1) ... Setting up gettext-base (0.21-14+b1) ... Setting up m4 (1.4.19-4) ... Setting up systemd-dev (255.4-1) ... Setting up file (1:5.45-2+b1) ... Setting up autotools-dev (20220109.1) ... Setting up libpkgconf3:armhf (1.8.1-1+b2) ... Setting up libncurses6:armhf (6.4+20240113-1) ... Setting up autopoint (0.21-14) ... Setting up pkgconf-bin (1.8.1-1+b2) ... Setting up autoconf (2.71-3) ... Setting up sensible-utils (0.0.22) ... Setting up libuchardet0:armhf (0.0.8-1+b1) ... Setting up liblua5.1-0:armhf (5.1.5-9+b1) ... Setting up libsub-override-perl (0.10-1) ... Setting up libelf1:armhf (0.190-1+b1) ... Setting up readline-common (8.2-3) ... Setting up libxml2:armhf (2.9.14+dfsg-1.3+b2) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.13.1-1) ... Setting up libncurses-dev:armhf (6.4+20240113-1) ... Setting up gettext (0.21-14+b1) ... Setting up libtool (2.4.7-7) ... Setting up libreadline8:armhf (8.2-3+b1) ... Setting up libreadline-dev:armhf (8.2-3+b1) ... Setting up lua5.1 (5.1.5-9+b1) ... update-alternatives: using /usr/bin/lua5.1 to provide /usr/bin/lua (lua-interpreter) in auto mode update-alternatives: using /usr/bin/luac5.1 to provide /usr/bin/luac (lua-compiler) in auto mode Setting up pkgconf:armhf (1.8.1-1+b2) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.13.1-1) ... Setting up dwz (0.15-1) ... Setting up groff-base (1.23.0-3) ... Setting up liblua5.1-0-dev:armhf (5.1.5-9+b1) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.12.0-3) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.15.3) ... Processing triggers for libc-bin (2.37-15) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.33-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/reproducible-path/ekeyd-1.1.5/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../ekeyd_1.1.5-6.3_source.changes dpkg-buildpackage: info: source package ekeyd dpkg-buildpackage: info: source version 1.1.5-6.3 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Chris Hofstaedtler dpkg-source --before-build . dpkg-buildpackage: info: host architecture armhf fakeroot debian/rules clean dh clean debian/rules override_dh_auto_clean make[1]: Entering directory '/build/reproducible-path/ekeyd-1.1.5' dh_auto_clean make -j3 clean make[2]: Entering directory '/build/reproducible-path/ekeyd-1.1.5' make -C host BUILD_ULUSB=no BUILD_EGDLINUX=no DESTDIR= clean make[3]: Entering directory '/build/reproducible-path/ekeyd-1.1.5/host' rm -f rdpkt ekeyd ekey-setkey *.o control.inc ../device/skeinwrap.o ../device/frames/pem.o ../device/skein/skein.o ../device/skein/skein_block.o ekeyd.conf ekey-rekey egd-linux control.inc.new ekeydctl ekey-ulusbd *.gcda gmon.out make[3]: Leaving directory '/build/reproducible-path/ekeyd-1.1.5/host' make[2]: Leaving directory '/build/reproducible-path/ekeyd-1.1.5' /usr/bin/make -C host clean make[2]: Entering directory '/build/reproducible-path/ekeyd-1.1.5/host' rm -f rdpkt ekeyd ekey-setkey *.o control.inc ../device/skeinwrap.o ../device/frames/pem.o ../device/skein/skein.o ../device/skein/skein_block.o ekeyd.conf ekey-rekey egd-linux control.inc.new ekeydctl ekey-ulusbd *.gcda gmon.out make[2]: Leaving directory '/build/reproducible-path/ekeyd-1.1.5/host' make[1]: Leaving directory '/build/reproducible-path/ekeyd-1.1.5' dh_clean debian/rules build dh build dh_update_autotools_config dh_autoreconf dh_auto_configure debian/rules override_dh_auto_build make[1]: Entering directory '/build/reproducible-path/ekeyd-1.1.5' dh_auto_build --sourcedirectory=host -- BUILD_ULUSBD=no cd host && make -j3 "INSTALL=install --strip-program=true" BUILD_ULUSBD=no make[2]: Entering directory '/build/reproducible-path/ekeyd-1.1.5/host' cc -g -O2 -ffile-prefix-map=/build/reproducible-path/ekeyd-1.1.5=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -DEKEY_OS_LINUX -DEKEY_FULL_TERMIOS -I../device/frames/ -I../device/ -I../device/skein/ -I/usr/include/lua5.1 -g -Wall -O2 -fno-strict-aliasing -std=c99 -Wall -pedantic -Wshadow -Werror -D_GNU_SOURCE '-DCONFIGFILE="/etc/entropykey/ekeyd.conf"' '-DPIDFILE="/var/run/ekeyd.pid"' '-DKEYRINGFILE="/etc/entropykey/keyring"' '-DEKEYD_VERSION_S="""1.1.5"""' -Wdate-time -D_FORTIFY_SOURCE=2 -c -o ekeyd.o ekeyd.c cc -g -O2 -ffile-prefix-map=/build/reproducible-path/ekeyd-1.1.5=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -DEKEY_OS_LINUX -DEKEY_FULL_TERMIOS -I../device/frames/ -I../device/ -I../device/skein/ -I/usr/include/lua5.1 -g -Wall -O2 -fno-strict-aliasing -std=c99 -Wall -pedantic -Wshadow -Werror -D_GNU_SOURCE '-DCONFIGFILE="/etc/entropykey/ekeyd.conf"' '-DPIDFILE="/var/run/ekeyd.pid"' '-DKEYRINGFILE="/etc/entropykey/keyring"' '-DEKEYD_VERSION_S="""1.1.5"""' -Wdate-time -D_FORTIFY_SOURCE=2 -c -o daemonise.o daemonise.c lua5.1 bin2c.lua +control.lua result > control.inc.new mv control.inc.new control.inc cc -g -O2 -ffile-prefix-map=/build/reproducible-path/ekeyd-1.1.5=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -DEKEY_OS_LINUX -DEKEY_FULL_TERMIOS -I../device/frames/ -I../device/ -I../device/skein/ -I/usr/include/lua5.1 -g -Wall -O2 -fno-strict-aliasing -std=c99 -Wall -pedantic -Wshadow -Werror -D_GNU_SOURCE '-DCONFIGFILE="/etc/entropykey/ekeyd.conf"' '-DPIDFILE="/var/run/ekeyd.pid"' '-DKEYRINGFILE="/etc/entropykey/keyring"' '-DEKEYD_VERSION_S="""1.1.5"""' -Wdate-time -D_FORTIFY_SOURCE=2 -c -o connection.o connection.c cc -g -O2 -ffile-prefix-map=/build/reproducible-path/ekeyd-1.1.5=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -DEKEY_OS_LINUX -DEKEY_FULL_TERMIOS -I../device/frames/ -I../device/ -I../device/skein/ -I/usr/include/lua5.1 -g -Wall -O2 -fno-strict-aliasing -std=c99 -Wall -pedantic -Wshadow -Werror -D_GNU_SOURCE '-DCONFIGFILE="/etc/entropykey/ekeyd.conf"' '-DPIDFILE="/var/run/ekeyd.pid"' '-DKEYRINGFILE="/etc/entropykey/keyring"' '-DEKEYD_VERSION_S="""1.1.5"""' -Wdate-time -D_FORTIFY_SOURCE=2 -c -o stream.o stream.c cc -g -O2 -ffile-prefix-map=/build/reproducible-path/ekeyd-1.1.5=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -DEKEY_OS_LINUX -DEKEY_FULL_TERMIOS -I../device/frames/ -I../device/ -I../device/skein/ -I/usr/include/lua5.1 -g -Wall -O2 -fno-strict-aliasing -std=c99 -Wall -pedantic -Wshadow -Werror -D_GNU_SOURCE '-DCONFIGFILE="/etc/entropykey/ekeyd.conf"' '-DPIDFILE="/var/run/ekeyd.pid"' '-DKEYRINGFILE="/etc/entropykey/keyring"' '-DEKEYD_VERSION_S="""1.1.5"""' -Wdate-time -D_FORTIFY_SOURCE=2 -c -o frame.o frame.c cc -g -O2 -ffile-prefix-map=/build/reproducible-path/ekeyd-1.1.5=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -DEKEY_OS_LINUX -DEKEY_FULL_TERMIOS -I../device/frames/ -I../device/ -I../device/skein/ -I/usr/include/lua5.1 -g -Wall -O2 -fno-strict-aliasing -std=c99 -Wall -pedantic -Wshadow -Werror -D_GNU_SOURCE '-DCONFIGFILE="/etc/entropykey/ekeyd.conf"' '-DPIDFILE="/var/run/ekeyd.pid"' '-DKEYRINGFILE="/etc/entropykey/keyring"' '-DEKEYD_VERSION_S="""1.1.5"""' -Wdate-time -D_FORTIFY_SOURCE=2 -c -o packet.o packet.c cc -g -O2 -ffile-prefix-map=/build/reproducible-path/ekeyd-1.1.5=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -DEKEY_OS_LINUX -DEKEY_FULL_TERMIOS -I../device/frames/ -I../device/ -I../device/skein/ -I/usr/include/lua5.1 -g -Wall -O2 -fno-strict-aliasing -std=c99 -Wall -pedantic -Wshadow -Werror -D_GNU_SOURCE '-DCONFIGFILE="/etc/entropykey/ekeyd.conf"' '-DPIDFILE="/var/run/ekeyd.pid"' '-DKEYRINGFILE="/etc/entropykey/keyring"' '-DEKEYD_VERSION_S="""1.1.5"""' -Wdate-time -D_FORTIFY_SOURCE=2 -c -o keydb.o keydb.c cc -g -O2 -ffile-prefix-map=/build/reproducible-path/ekeyd-1.1.5=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -DEKEY_OS_LINUX -DEKEY_FULL_TERMIOS -I../device/frames/ -I../device/ -I../device/skein/ -I/usr/include/lua5.1 -g -Wall -O2 -fno-strict-aliasing -std=c99 -Wall -pedantic -Wshadow -Werror -D_GNU_SOURCE '-DCONFIGFILE="/etc/entropykey/ekeyd.conf"' '-DPIDFILE="/var/run/ekeyd.pid"' '-DKEYRINGFILE="/etc/entropykey/keyring"' '-DEKEYD_VERSION_S="""1.1.5"""' -Wdate-time -D_FORTIFY_SOURCE=2 -c -o util.o util.c cc -g -O2 -ffile-prefix-map=/build/reproducible-path/ekeyd-1.1.5=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -DEKEY_OS_LINUX -DEKEY_FULL_TERMIOS -I../device/frames/ -I../device/ -I../device/skein/ -I/usr/include/lua5.1 -g -Wall -O2 -fno-strict-aliasing -std=c99 -Wall -pedantic -Wshadow -Werror -D_GNU_SOURCE '-DCONFIGFILE="/etc/entropykey/ekeyd.conf"' '-DPIDFILE="/var/run/ekeyd.pid"' '-DKEYRINGFILE="/etc/entropykey/keyring"' '-DEKEYD_VERSION_S="""1.1.5"""' -Wdate-time -D_FORTIFY_SOURCE=2 -c -o fds.o fds.c cc -g -O2 -ffile-prefix-map=/build/reproducible-path/ekeyd-1.1.5=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -DEKEY_OS_LINUX -DEKEY_FULL_TERMIOS -I../device/frames/ -I../device/ -I../device/skein/ -I/usr/include/lua5.1 -g -Wall -O2 -fno-strict-aliasing -std=c99 -Wall -pedantic -Wshadow -Werror -D_GNU_SOURCE '-DCONFIGFILE="/etc/entropykey/ekeyd.conf"' '-DPIDFILE="/var/run/ekeyd.pid"' '-DKEYRINGFILE="/etc/entropykey/keyring"' '-DEKEYD_VERSION_S="""1.1.5"""' -Wdate-time -D_FORTIFY_SOURCE=2 -c -o krnlop.o krnlop.c cc -g -O2 -ffile-prefix-map=/build/reproducible-path/ekeyd-1.1.5=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -DEKEY_OS_LINUX -DEKEY_FULL_TERMIOS -I../device/frames/ -I../device/ -I../device/skein/ -I/usr/include/lua5.1 -g -Wall -O2 -fno-strict-aliasing -std=c99 -Wall -pedantic -Wshadow -Werror -D_GNU_SOURCE '-DCONFIGFILE="/etc/entropykey/ekeyd.conf"' '-DPIDFILE="/var/run/ekeyd.pid"' '-DKEYRINGFILE="/etc/entropykey/keyring"' '-DEKEYD_VERSION_S="""1.1.5"""' -Wdate-time -D_FORTIFY_SOURCE=2 -c -o foldback.o foldback.c cc -g -O2 -ffile-prefix-map=/build/reproducible-path/ekeyd-1.1.5=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -DEKEY_OS_LINUX -DEKEY_FULL_TERMIOS -I../device/frames/ -I../device/ -I../device/skein/ -I/usr/include/lua5.1 -g -Wall -O2 -fno-strict-aliasing -std=c99 -Wall -pedantic -Wshadow -Werror -D_GNU_SOURCE '-DCONFIGFILE="/etc/entropykey/ekeyd.conf"' '-DPIDFILE="/var/run/ekeyd.pid"' '-DKEYRINGFILE="/etc/entropykey/keyring"' '-DEKEYD_VERSION_S="""1.1.5"""' -Wdate-time -D_FORTIFY_SOURCE=2 -c -o stats.o stats.c cc -g -O2 -ffile-prefix-map=/build/reproducible-path/ekeyd-1.1.5=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -DEKEY_OS_LINUX -DEKEY_FULL_TERMIOS -I../device/frames/ -I../device/ -I../device/skein/ -I/usr/include/lua5.1 -g -Wall -O2 -fno-strict-aliasing -std=c99 -Wall -pedantic -Wshadow -Werror -D_GNU_SOURCE '-DCONFIGFILE="/etc/entropykey/ekeyd.conf"' '-DPIDFILE="/var/run/ekeyd.pid"' '-DKEYRINGFILE="/etc/entropykey/keyring"' '-DEKEYD_VERSION_S="""1.1.5"""' -Wdate-time -D_FORTIFY_SOURCE=2 -c -o nonce.o nonce.c cc -g -O2 -ffile-prefix-map=/build/reproducible-path/ekeyd-1.1.5=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -DEKEY_OS_LINUX -DEKEY_FULL_TERMIOS -I../device/frames/ -I../device/ -I../device/skein/ -I/usr/include/lua5.1 -g -Wall -O2 -fno-strict-aliasing -std=c99 -Wall -pedantic -Wshadow -Werror -D_GNU_SOURCE '-DCONFIGFILE="/etc/entropykey/ekeyd.conf"' '-DPIDFILE="/var/run/ekeyd.pid"' '-DKEYRINGFILE="/etc/entropykey/keyring"' '-DEKEYD_VERSION_S="""1.1.5"""' -Wdate-time -D_FORTIFY_SOURCE=2 -c -o ../device/frames/pem.o ../device/frames/pem.c cc -g -O2 -ffile-prefix-map=/build/reproducible-path/ekeyd-1.1.5=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -DEKEY_OS_LINUX -DEKEY_FULL_TERMIOS -I../device/frames/ -I../device/ -I../device/skein/ -I/usr/include/lua5.1 -g -Wall -O2 -fno-strict-aliasing -std=c99 -Wall -pedantic -Wshadow -Werror -D_GNU_SOURCE '-DCONFIGFILE="/etc/entropykey/ekeyd.conf"' '-DPIDFILE="/var/run/ekeyd.pid"' '-DKEYRINGFILE="/etc/entropykey/keyring"' '-DEKEYD_VERSION_S="""1.1.5"""' -Wdate-time -D_FORTIFY_SOURCE=2 -c -o ../device/skeinwrap.o ../device/skeinwrap.c cc -g -O2 -ffile-prefix-map=/build/reproducible-path/ekeyd-1.1.5=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -DEKEY_OS_LINUX -DEKEY_FULL_TERMIOS -I../device/frames/ -I../device/ -I../device/skein/ -I/usr/include/lua5.1 -g -Wall -O2 -fno-strict-aliasing -std=c99 -Wall -pedantic -Wshadow -Werror -D_GNU_SOURCE '-DCONFIGFILE="/etc/entropykey/ekeyd.conf"' '-DPIDFILE="/var/run/ekeyd.pid"' '-DKEYRINGFILE="/etc/entropykey/keyring"' '-DEKEYD_VERSION_S="""1.1.5"""' -Wdate-time -D_FORTIFY_SOURCE=2 -c -o ../device/skein/skein.o ../device/skein/skein.c cc -g -O2 -ffile-prefix-map=/build/reproducible-path/ekeyd-1.1.5=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -DEKEY_OS_LINUX -DEKEY_FULL_TERMIOS -I../device/frames/ -I../device/ -I../device/skein/ -I/usr/include/lua5.1 -g -Wall -O2 -fno-strict-aliasing -std=c99 -Wall -pedantic -Wshadow -Werror -D_GNU_SOURCE '-DCONFIGFILE="/etc/entropykey/ekeyd.conf"' '-DPIDFILE="/var/run/ekeyd.pid"' '-DKEYRINGFILE="/etc/entropykey/keyring"' '-DEKEYD_VERSION_S="""1.1.5"""' -Wdate-time -D_FORTIFY_SOURCE=2 -c -o ../device/skein/skein_block.o ../device/skein/skein_block.c cc -g -O2 -ffile-prefix-map=/build/reproducible-path/ekeyd-1.1.5=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -DEKEY_OS_LINUX -DEKEY_FULL_TERMIOS -I../device/frames/ -I../device/ -I../device/skein/ -I/usr/include/lua5.1 -g -Wall -O2 -fno-strict-aliasing -std=c99 -Wall -pedantic -Wshadow -Werror -D_GNU_SOURCE '-DCONFIGFILE="/etc/entropykey/ekeyd.conf"' '-DPIDFILE="/var/run/ekeyd.pid"' '-DKEYRINGFILE="/etc/entropykey/keyring"' '-DEKEYD_VERSION_S="""1.1.5"""' -Wdate-time -D_FORTIFY_SOURCE=2 -c -o ekey-setkey.o ekey-setkey.c cc -g -O2 -ffile-prefix-map=/build/reproducible-path/ekeyd-1.1.5=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -DEKEY_OS_LINUX -DEKEY_FULL_TERMIOS -I../device/frames/ -I../device/ -I../device/skein/ -I/usr/include/lua5.1 -g -Wall -O2 -fno-strict-aliasing -std=c99 -Wall -pedantic -Wshadow -Werror -D_GNU_SOURCE '-DCONFIGFILE="/etc/entropykey/ekeyd.conf"' '-DPIDFILE="/var/run/ekeyd.pid"' '-DKEYRINGFILE="/etc/entropykey/keyring"' '-DEKEYD_VERSION_S="""1.1.5"""' -Wdate-time -D_FORTIFY_SOURCE=2 -c -o crc8.o crc8.c cc -g -O2 -ffile-prefix-map=/build/reproducible-path/ekeyd-1.1.5=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -DEKEY_OS_LINUX -DEKEY_FULL_TERMIOS -I../device/frames/ -I../device/ -I../device/skein/ -I/usr/include/lua5.1 -g -Wall -O2 -fno-strict-aliasing -std=c99 -Wall -pedantic -Wshadow -Werror -D_GNU_SOURCE '-DCONFIGFILE="/etc/entropykey/ekeyd.conf"' '-DPIDFILE="/var/run/ekeyd.pid"' '-DKEYRINGFILE="/etc/entropykey/keyring"' '-DEKEYD_VERSION_S="""1.1.5"""' -Wdate-time -D_FORTIFY_SOURCE=2 -c -o egd-linux.o egd-linux.c sed -e's|@PREFIX@|/usr|g' -e's|@SYSCONFPREFIX@|/etc/entropykey|g' -e's|@RUNTIMEPREFIX@|/var/run|g' -e's|@LUA_V@|5.1|g' -e's|@KERNOUTOK@||' -e's|@KERNOUTNOTOK@|-- |' -e's|@EGDSOCK@|/etc/entropy|' -e's|@UDEVOK@||' -e's|@EKEYD_VERSION_S@|"1.1.5"|' < ekey-rekey.in > ekey-rekey if test -x ekey-rekey.in; then chmod +x ekey-rekey; fi sed -e's|@PREFIX@|/usr|g' -e's|@SYSCONFPREFIX@|/etc/entropykey|g' -e's|@RUNTIMEPREFIX@|/var/run|g' -e's|@LUA_V@|5.1|g' -e's|@KERNOUTOK@||' -e's|@KERNOUTNOTOK@|-- |' -e's|@EGDSOCK@|/etc/entropy|' -e's|@UDEVOK@||' -e's|@EKEYD_VERSION_S@|"1.1.5"|' < ekeydctl.in > ekeydctl if test -x ekeydctl.in; then chmod +x ekeydctl; fi sed -e's|@PREFIX@|/usr|g' -e's|@SYSCONFPREFIX@|/etc/entropykey|g' -e's|@RUNTIMEPREFIX@|/var/run|g' -e's|@LUA_V@|5.1|g' -e's|@KERNOUTOK@||' -e's|@KERNOUTNOTOK@|-- |' -e's|@EGDSOCK@|/etc/entropy|' -e's|@UDEVOK@||' -e's|@EKEYD_VERSION_S@|"1.1.5"|' < ekeyd.conf.in > ekeyd.conf if test -x ekeyd.conf.in; then chmod +x ekeyd.conf; fi cc -g -O2 -ffile-prefix-map=/build/reproducible-path/ekeyd-1.1.5=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -DEKEY_OS_LINUX -DEKEY_FULL_TERMIOS -I../device/frames/ -I../device/ -I../device/skein/ -I/usr/include/lua5.1 -g -Wall -O2 -fno-strict-aliasing -std=c99 -Wall -pedantic -Wshadow -Werror -D_GNU_SOURCE '-DCONFIGFILE="/etc/entropykey/ekeyd.conf"' '-DPIDFILE="/var/run/ekeyd.pid"' '-DKEYRINGFILE="/etc/entropykey/keyring"' '-DEKEYD_VERSION_S="""1.1.5"""' -Wdate-time -D_FORTIFY_SOURCE=2 -c -o lstate.o lstate.c cc -g -O2 -ffile-prefix-map=/build/reproducible-path/ekeyd-1.1.5=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -DEKEY_OS_LINUX -DEKEY_FULL_TERMIOS -I../device/frames/ -I../device/ -I../device/skein/ -I/usr/include/lua5.1 -g -Wall -O2 -fno-strict-aliasing -std=c99 -Wall -pedantic -Wshadow -Werror -D_GNU_SOURCE '-DCONFIGFILE="/etc/entropykey/ekeyd.conf"' '-DPIDFILE="/var/run/ekeyd.pid"' '-DKEYRINGFILE="/etc/entropykey/keyring"' '-DEKEYD_VERSION_S="""1.1.5"""' -Wl,-z,relro -o egd-linux egd-linux.o daemonise.o cc -g -O2 -ffile-prefix-map=/build/reproducible-path/ekeyd-1.1.5=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -DEKEY_OS_LINUX -DEKEY_FULL_TERMIOS -I../device/frames/ -I../device/ -I../device/skein/ -I/usr/include/lua5.1 -g -Wall -O2 -fno-strict-aliasing -std=c99 -Wall -pedantic -Wshadow -Werror -D_GNU_SOURCE '-DCONFIGFILE="/etc/entropykey/ekeyd.conf"' '-DPIDFILE="/var/run/ekeyd.pid"' '-DKEYRINGFILE="/etc/entropykey/keyring"' '-DEKEYD_VERSION_S="""1.1.5"""' -Wl,-z,relro -o ekeyd ekeyd.o daemonise.o lstate.o connection.o stream.o frame.o packet.o keydb.o util.o fds.o krnlop.o foldback.o stats.o nonce.o ../device/frames/pem.o ../device/skeinwrap.o ../device/skein/skein.o ../device/skein/skein_block.o -llua5.1 -lm -ldl cc -g -O2 -ffile-prefix-map=/build/reproducible-path/ekeyd-1.1.5=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -DEKEY_OS_LINUX -DEKEY_FULL_TERMIOS -I../device/frames/ -I../device/ -I../device/skein/ -I/usr/include/lua5.1 -g -Wall -O2 -fno-strict-aliasing -std=c99 -Wall -pedantic -Wshadow -Werror -D_GNU_SOURCE '-DCONFIGFILE="/etc/entropykey/ekeyd.conf"' '-DPIDFILE="/var/run/ekeyd.pid"' '-DKEYRINGFILE="/etc/entropykey/keyring"' '-DEKEYD_VERSION_S="""1.1.5"""' -Wl,-z,relro -o ekey-setkey ekey-setkey.o util.o stream.o frame.o packet.o keydb.o crc8.o nonce.o ../device/frames/pem.o ../device/skeinwrap.o ../device/skein/skein.o ../device/skein/skein_block.o make[2]: Leaving directory '/build/reproducible-path/ekeyd-1.1.5/host' make[1]: Leaving directory '/build/reproducible-path/ekeyd-1.1.5' dh_auto_test create-stamp debian/debhelper-build-stamp fakeroot debian/rules binary dh binary dh_testroot dh_prep dh_installdirs debian/rules override_dh_auto_install make[1]: Entering directory '/build/reproducible-path/ekeyd-1.1.5' install -m 644 munin/plugin-conf.d_ekeyd debian/ekeyd/etc/munin/plugin-conf.d/ekeyd install -m 644 debian/ekeyd.default debian/ekeyd/etc/default/ekeyd install -m 600 debian/ekeyd.keyring debian/ekeyd/etc/entropykey/keyring if [ -d debian/ekeyd-egd-linux ] ; then \ install -m 755 host/egd-linux debian/ekeyd-egd-linux/usr/sbin/ekeyd-egd-linux; \ install -m 644 debian/ekeyd-egd-linux.default debian/ekeyd-egd-linux/etc/default/ekeyd-egd-linux ; \ install -m 644 host/egd-linux.8 debian/ekeyd-egd-linux/usr/share/man/man8/ekeyd-egd-linux.8 ; \ fi make[1]: Leaving directory '/build/reproducible-path/ekeyd-1.1.5' dh_install dh_installdocs dh_installchangelogs dh_installman dh_installinit dh_installudev dh_perl dh_link dh_strip_nondeterminism dh_compress debian/rules override_dh_fixperms make[1]: Entering directory '/build/reproducible-path/ekeyd-1.1.5' dh_fixperms chmod 0755 debian/ekeyd/usr/share/munin/plugins/ekeyd_stat_ chmod 0755 debian/ekeyd/usr/lib/udev/entropykey.sh make[1]: Leaving directory '/build/reproducible-path/ekeyd-1.1.5' dh_missing dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dh_installdeb dh_gencontrol dpkg-gencontrol: warning: package ekeyd: substitution variable ${misc:Pre-Depends} unused, but is defined dpkg-gencontrol: warning: package ekeyd: substitution variable ${perl:Depends} unused, but is defined dpkg-gencontrol: warning: package ekeyd-egd-linux: substitution variable ${misc:Pre-Depends} unused, but is defined dpkg-gencontrol: warning: package ekeyd: substitution variable ${misc:Pre-Depends} unused, but is defined dpkg-gencontrol: warning: package ekeyd: substitution variable ${perl:Depends} unused, but is defined dpkg-gencontrol: warning: package ekeyd-egd-linux: substitution variable ${misc:Pre-Depends} unused, but is defined dh_md5sums dh_builddeb dpkg-deb: building package 'ekeyd-egd-linux' in '../ekeyd-egd-linux_1.1.5-6.3_armhf.deb'. dpkg-deb: building package 'ekeyd' in '../ekeyd_1.1.5-6.3_armhf.deb'. dpkg-deb: building package 'ekeyd-egd-linux-dbgsym' in '../ekeyd-egd-linux-dbgsym_1.1.5-6.3_armhf.deb'. dpkg-deb: building package 'ekeyd-dbgsym' in '../ekeyd-dbgsym_1.1.5-6.3_armhf.deb'. dpkg-genbuildinfo --build=binary -O../ekeyd_1.1.5-6.3_armhf.buildinfo dpkg-genchanges --build=binary -O../ekeyd_1.1.5-6.3_armhf.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/21469 and its subdirectories I: Current time: Sun Apr 14 09:30:17 -12 2024 I: pbuilder-time-stamp: 1713130217 Sun Apr 14 21:30:29 UTC 2024 I: 1st build successful. Starting 2nd build on remote node virt32z-armhf-rb.debian.net. Sun Apr 14 21:30:29 UTC 2024 I: Preparing to do remote build '2' on virt32z-armhf-rb.debian.net. Sun Apr 14 21:31:48 UTC 2024 I: Deleting $TMPDIR on virt32z-armhf-rb.debian.net. Sun Apr 14 21:31:50 UTC 2024 I: ekeyd_1.1.5-6.3_armhf.changes: Format: 1.8 Date: Fri, 08 Dec 2023 00:24:37 +0100 Source: ekeyd Binary: ekeyd ekeyd-dbgsym ekeyd-egd-linux ekeyd-egd-linux-dbgsym Architecture: armhf Version: 1.1.5-6.3 Distribution: unstable Urgency: medium Maintainer: Simtec Electronics Changed-By: Chris Hofstaedtler Description: ekeyd - Simtec Electronics UDEKEY01 Entropy Key Daemon ekeyd-egd-linux - Transfers entropy from an EGD to the Linux kernel pool Closes: 888775 889304 1050646 Changes: ekeyd (1.1.5-6.3) unstable; urgency=medium . * Non-maintainer upload. * Delegate placement of udev files to pkg-config data * Update dh compat for substitutions in .install files. * Cleanup uploaders list (Closes: #889304, #1050646) . [ Helmut Grohne ] * Fix FTCBFS: Let dh_auto_build pass cross compilers to make. (Closes: #888775) Checksums-Sha1: 00155630d0dd4472d1726787b52c1f2fc374c2fe 113076 ekeyd-dbgsym_1.1.5-6.3_armhf.deb 401625d8ce736287d4195ffaa3773035eca839d4 15104 ekeyd-egd-linux-dbgsym_1.1.5-6.3_armhf.deb e41f38673588f4cb4c949834cb95602ba2712dd3 14380 ekeyd-egd-linux_1.1.5-6.3_armhf.deb 504e66ce65859b9be3f4856935906cda6b96d593 6245 ekeyd_1.1.5-6.3_armhf.buildinfo c7b031c7c212544b13b1ebb3ea9eb8a3c4c62381 76096 ekeyd_1.1.5-6.3_armhf.deb Checksums-Sha256: 6e181765adc761926f243818881bd57e4129e0c1f9c0b840710bddf936dec0d3 113076 ekeyd-dbgsym_1.1.5-6.3_armhf.deb 56ccdc0d8d8dc71fd363d52147648991909253cfd18957e0f5a0833231f260c5 15104 ekeyd-egd-linux-dbgsym_1.1.5-6.3_armhf.deb fdf50699a7f2205d5bc64aa6fd70aeeaad3a1bd6a948795cc223871a6877014a 14380 ekeyd-egd-linux_1.1.5-6.3_armhf.deb 37aaccd63ef7b58e97fbd05913b656985bbe762f846220222ed1f648119a2c83 6245 ekeyd_1.1.5-6.3_armhf.buildinfo fcfdf02d12d7be2015257680dde2780a979f2ad926079bdef30f577b97d5da07 76096 ekeyd_1.1.5-6.3_armhf.deb Files: c05ae482567fef974111623a1d77689a 113076 debug optional ekeyd-dbgsym_1.1.5-6.3_armhf.deb 16fd32140de6e09e1fac94676ac867f4 15104 debug optional ekeyd-egd-linux-dbgsym_1.1.5-6.3_armhf.deb c1baacbb649a681ba8346bf93b7201b7 14380 utils optional ekeyd-egd-linux_1.1.5-6.3_armhf.deb c0549d52d48d0e25cfe667db46c030d2 6245 utils optional ekeyd_1.1.5-6.3_armhf.buildinfo 787c0d7535b020c2848f27ca0aa0aa62 76096 utils optional ekeyd_1.1.5-6.3_armhf.deb Sun Apr 14 21:31:51 UTC 2024 I: diffoscope 264 will be used to compare the two builds: Running as unit: rb-diffoscope-armhf_6-3097.service # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.am617zlj/ekeyd_1.1.5-6.3.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.am617zlj/ekeyd_1.1.5-6.3.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.am617zlj/ekeyd_1.1.5-6.3.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.am617zlj/b1/ekeyd_1.1.5-6.3_armhf.changes /srv/reproducible-results/rbuild-debian/r-b-build.am617zlj/b2/ekeyd_1.1.5-6.3_armhf.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.344s) 0.344s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.019s) 0.019s 12 calls diffoscope.comparators.binary.FilesystemFile ## specialize (total time: 0.000s) 0.000s 1 call specialize Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 659ms CPU time consumed: 655ms Sun Apr 14 21:31:52 UTC 2024 I: diffoscope 264 found no differences in the changes files, and a .buildinfo file also exists. Sun Apr 14 21:31:52 UTC 2024 I: ekeyd from trixie built successfully and reproducibly on armhf. Sun Apr 14 21:31:54 UTC 2024 I: Submitting .buildinfo files to external archives: Sun Apr 14 21:31:54 UTC 2024 I: Submitting 8.0K b1/ekeyd_1.1.5-6.3_armhf.buildinfo.asc Sun Apr 14 21:31:55 UTC 2024 I: Submitting 8.0K b2/ekeyd_1.1.5-6.3_armhf.buildinfo.asc Sun Apr 14 21:31:55 UTC 2024 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Sun Apr 14 21:31:55 UTC 2024 I: Done submitting .buildinfo files. Sun Apr 14 21:31:55 UTC 2024 I: Removing signed ekeyd_1.1.5-6.3_armhf.buildinfo.asc files: removed './b1/ekeyd_1.1.5-6.3_armhf.buildinfo.asc' removed './b2/ekeyd_1.1.5-6.3_armhf.buildinfo.asc'