Thu Apr 25 17:14:37 UTC 2024 I: starting to build debspawn/trixie/armhf on jenkins on '2024-04-25 17:14' Thu Apr 25 17:14:37 UTC 2024 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/armhf_14/3061/console.log Thu Apr 25 17:14:37 UTC 2024 I: Downloading source for trixie/debspawn=0.6.4-1 --2024-04-25 17:14:37-- http://deb.debian.org/debian/pool/main/d/debspawn/debspawn_0.6.4-1.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2086 (2.0K) [text/prs.lines.tag] Saving to: ‘debspawn_0.6.4-1.dsc’ 0K .. 100% 255M=0s 2024-04-25 17:14:37 (255 MB/s) - ‘debspawn_0.6.4-1.dsc’ saved [2086/2086] Thu Apr 25 17:14:37 UTC 2024 I: debspawn_0.6.4-1.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Format: 3.0 (quilt) Source: debspawn Binary: debspawn Architecture: all Version: 0.6.4-1 Maintainer: Matthias Klumpp Homepage: https://github.com/lkhq/debspawn Standards-Version: 4.6.2 Vcs-Browser: https://salsa.debian.org/laniakea-team/debspawn Vcs-Git: https://salsa.debian.org/laniakea-team/debspawn.git Testsuite: autopkgtest Testsuite-Triggers: apt, sudo Build-Depends: debhelper-compat (= 13), dh-python, docbook-xml, docbook-xsl, python3-all, python3-pkgconfig, python3-setuptools, python3-tomlkit (>= 0.8.0), systemd-dev, xsltproc Build-Conflicts: pybuild-plugin-pyproject Package-List: debspawn deb utils optional arch=all Checksums-Sha1: 8a587bc554ccd0874891cf227cef3387d3cc17e4 64541 debspawn_0.6.4.orig.tar.gz fa152a708370f62b7b66ed139f2c83eb0792c337 4840 debspawn_0.6.4-1.debian.tar.xz Checksums-Sha256: e15e693f9f992ca975280d3e505b5279f3ca4eb942bf54c2d39ef188767fd0e3 64541 debspawn_0.6.4.orig.tar.gz 38aeed866148228d659fe5280005f65e69c62acf03178e06f63dda029769cfe9 4840 debspawn_0.6.4-1.debian.tar.xz Files: 82be63e64dcf9c23d7072c048bda7f0d 64541 debspawn_0.6.4.orig.tar.gz 148155c13df764457c78a707bfef456b 4840 debspawn_0.6.4-1.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQJDBAEBCAAtFiEE0zo/DKFrCsxRpgc4SUyKX79N7OsFAmXVEqYPHG1ha0BkZWJp YW4ub3JnAAoJEElMil+/Tezr8KcP/AjiPrEJFwKOOnfiTByqKScpaJlNb3lEUw/c gjfZR4zuK7lBESW4iwqjhHaDZmwMn2CqK8dcjUlahfOJ/EgAQSOifdXmtAt3/xPP bJHBCtfVFggNcO4/Jv1wNSysfWvzGFOatMgNgIeArFKLCkr1eQW1UDcZH+LxESgn iaGNp7i3yu+tPI66vXcZl6e23h2+sv8+L6voFK46kzde6Gf1hDdouFqoy8O8rb3H QdzcMbll4noOGccnrgsAxl4JmteRJ4nk9E1GWbeWxKxXiXNVstFQoD03t1hAEv56 2lKCxeWu+V/HVIVT8Ymfd5LfGkjQpSuD1vFNqLseT7e5Nsuhaanvme87dLzodN/a pUqTF2jeKiTV51BFys4Z37BYEFWY7V+E6Hkt7lYy55GZwVsvyoPgdDrLl9PoqHde 81cHNRr8yF9nouynO/9URo61bUM5iV04GnWdfgpoK67x+yFfrA0gY2GpUib3ItN0 HKqcLZabB1+ssNfVr1KQTxZQM3JonqMjc8Zvhxpz0LWhhAr6MV/4qYBKqQb9BOgN i0EiUxPAl/5quAAOYY6vwTArbP7Jp6st1jkVZ2I8sSoo15Wdp/lMGAOXFXoEdB3s mX5wN6sYOMHUZT0MNhqlMe92+2Z2POkrGpmxZG8ko1R4CafSJO10fYA1yErhG9m+ QWLZBNZL =HPzw -----END PGP SIGNATURE----- Thu Apr 25 17:14:37 UTC 2024 I: Checking whether the package is not for us Thu Apr 25 17:14:37 UTC 2024 I: Starting 1st build on remote node virt32z-armhf-rb.debian.net. Thu Apr 25 17:14:37 UTC 2024 I: Preparing to do remote build '1' on virt32z-armhf-rb.debian.net. Thu Apr 25 17:17:19 UTC 2024 I: Deleting $TMPDIR on virt32z-armhf-rb.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Thu Apr 25 05:14:44 -12 2024 I: pbuilder-time-stamp: 1714065284 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [debspawn_0.6.4-1.dsc] I: copying [./debspawn_0.6.4.orig.tar.gz] I: copying [./debspawn_0.6.4-1.debian.tar.xz] I: Extracting source gpgv: Signature made Tue Feb 20 20:59:18 2024 gpgv: using RSA key D33A3F0CA16B0ACC51A60738494C8A5FBF4DECEB gpgv: issuer "mak@debian.org" gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./debspawn_0.6.4-1.dsc: no acceptable signature found dpkg-source: info: extracting debspawn in debspawn-0.6.4 dpkg-source: info: unpacking debspawn_0.6.4.orig.tar.gz dpkg-source: info: unpacking debspawn_0.6.4-1.debian.tar.xz I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/29437/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='armhf' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=3 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='armhf' IFS=' ' INVOCATION_ID='4d1ba9865e624d2ab2005af25fa51eac' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='29437' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.xykMth4p/pbuilderrc_6zDO --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.xykMth4p/b1 --logfile b1/build.log debspawn_0.6.4-1.dsc' SUDO_GID='110' SUDO_UID='103' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://10.0.0.15:3142/' I: uname -a Linux virt32z 6.1.0-20-armmp-lpae #1 SMP Debian 6.1.85-1 (2024-04-11) armv7l GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Apr 25 11:24 /bin -> usr/bin I: user script /srv/workspace/pbuilder/29437/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: armhf Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), dh-python, docbook-xml, docbook-xsl, python3-all, python3-pkgconfig, python3-setuptools, python3-tomlkit (>= 0.8.0), systemd-dev, xsltproc Conflicts: pybuild-plugin-pyproject dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19468 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on dh-python; however: Package dh-python is not installed. pbuilder-satisfydepends-dummy depends on docbook-xml; however: Package docbook-xml is not installed. pbuilder-satisfydepends-dummy depends on docbook-xsl; however: Package docbook-xsl is not installed. pbuilder-satisfydepends-dummy depends on python3-all; however: Package python3-all is not installed. pbuilder-satisfydepends-dummy depends on python3-pkgconfig; however: Package python3-pkgconfig is not installed. pbuilder-satisfydepends-dummy depends on python3-setuptools; however: Package python3-setuptools is not installed. pbuilder-satisfydepends-dummy depends on python3-tomlkit (>= 0.8.0); however: Package python3-tomlkit is not installed. pbuilder-satisfydepends-dummy depends on systemd-dev; however: Package systemd-dev is not installed. pbuilder-satisfydepends-dummy depends on xsltproc; however: Package xsltproc is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-python{a} dh-strip-nondeterminism{a} docbook-xml{a} docbook-xsl{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libcom-err2{a} libdebhelper-perl{a} libelf1{a} libexpat1{a} libfile-stripnondeterminism-perl{a} libgssapi-krb5-2{a} libicu72{a} libk5crypto3{a} libkeyutils1{a} libkrb5-3{a} libkrb5support0{a} libmagic-mgc{a} libmagic1{a} libnsl2{a} libpipeline1{a} libpkgconf3{a} libpython3-stdlib{a} libpython3.11-minimal{a} libpython3.11-stdlib{a} libpython3.12-minimal{a} libpython3.12-stdlib{a} libreadline8{a} libsub-override-perl{a} libtirpc-common{a} libtirpc3{a} libtool{a} libuchardet0{a} libxml2{a} libxslt1.1{a} m4{a} man-db{a} media-types{a} netbase{a} pkg-config{a} pkgconf{a} pkgconf-bin{a} po-debconf{a} python3{a} python3-all{a} python3-distutils{a} python3-lib2to3{a} python3-minimal{a} python3-pkg-resources{a} python3-pkgconfig{a} python3-setuptools{a} python3-tomlkit{a} python3.11{a} python3.11-minimal{a} python3.12{a} python3.12-minimal{a} readline-common{a} sensible-utils{a} sgml-base{a} sgml-data{a} systemd-dev{a} tzdata{a} xml-core{a} xsltproc{a} The following packages are RECOMMENDED but will NOT be installed: ca-certificates curl krb5-locales libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 76 newly installed, 0 to remove and 0 not upgraded. Need to get 32.7 MB of archives. After unpacking 136 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main armhf libpython3.11-minimal armhf 3.11.8-1 [802 kB] Get: 2 http://deb.debian.org/debian trixie/main armhf libexpat1 armhf 2.6.2-1 [83.5 kB] Get: 3 http://deb.debian.org/debian trixie/main armhf python3.11-minimal armhf 3.11.8-1 [1707 kB] Get: 4 http://deb.debian.org/debian trixie/main armhf python3-minimal armhf 3.11.6-1 [26.2 kB] Get: 5 http://deb.debian.org/debian trixie/main armhf media-types all 10.1.0 [26.9 kB] Get: 6 http://deb.debian.org/debian trixie/main armhf netbase all 6.4 [12.8 kB] Get: 7 http://deb.debian.org/debian trixie/main armhf tzdata all 2024a-1 [255 kB] Get: 8 http://deb.debian.org/debian trixie/main armhf libkrb5support0 armhf 1.20.1-5+b1 [30.4 kB] Get: 9 http://deb.debian.org/debian trixie/main armhf libcom-err2 armhf 1.47.0-2+b1 [19.3 kB] Get: 10 http://deb.debian.org/debian trixie/main armhf libk5crypto3 armhf 1.20.1-5+b1 [75.4 kB] Get: 11 http://deb.debian.org/debian trixie/main armhf libkeyutils1 armhf 1.6.3-3 [7908 B] Get: 12 http://deb.debian.org/debian trixie/main armhf libkrb5-3 armhf 1.20.1-5+b1 [289 kB] Get: 13 http://deb.debian.org/debian trixie/main armhf libgssapi-krb5-2 armhf 1.20.1-5+b1 [112 kB] Get: 14 http://deb.debian.org/debian trixie/main armhf libtirpc-common all 1.3.4+ds-1 [10.7 kB] Get: 15 http://deb.debian.org/debian trixie/main armhf libtirpc3 armhf 1.3.4+ds-1 [70.0 kB] Get: 16 http://deb.debian.org/debian trixie/main armhf libnsl2 armhf 1.3.0-3 [33.7 kB] Get: 17 http://deb.debian.org/debian trixie/main armhf readline-common all 8.2-4 [69.3 kB] Get: 18 http://deb.debian.org/debian trixie/main armhf libreadline8 armhf 8.2-3+b1 [144 kB] Get: 19 http://deb.debian.org/debian trixie/main armhf libpython3.11-stdlib armhf 3.11.8-1 [1709 kB] Get: 20 http://deb.debian.org/debian trixie/main armhf python3.11 armhf 3.11.8-1 [597 kB] Get: 21 http://deb.debian.org/debian trixie/main armhf libpython3-stdlib armhf 3.11.6-1 [9224 B] Get: 22 http://deb.debian.org/debian trixie/main armhf python3 armhf 3.11.6-1 [26.2 kB] Get: 23 http://deb.debian.org/debian trixie/main armhf libpython3.12-minimal armhf 3.12.2-1 [793 kB] Get: 24 http://deb.debian.org/debian trixie/main armhf python3.12-minimal armhf 3.12.2-1 [1845 kB] Get: 25 http://deb.debian.org/debian trixie/main armhf sgml-base all 1.31 [15.4 kB] Get: 26 http://deb.debian.org/debian trixie/main armhf sensible-utils all 0.0.22 [22.4 kB] Get: 27 http://deb.debian.org/debian trixie/main armhf libmagic-mgc armhf 1:5.45-2+b1 [314 kB] Get: 28 http://deb.debian.org/debian trixie/main armhf libmagic1 armhf 1:5.45-2+b1 [97.9 kB] Get: 29 http://deb.debian.org/debian trixie/main armhf file armhf 1:5.45-2+b1 [42.2 kB] Get: 30 http://deb.debian.org/debian trixie/main armhf gettext-base armhf 0.21-14+b1 [157 kB] Get: 31 http://deb.debian.org/debian trixie/main armhf libuchardet0 armhf 0.0.8-1+b1 [65.7 kB] Get: 32 http://deb.debian.org/debian trixie/main armhf groff-base armhf 1.23.0-3 [1088 kB] Get: 33 http://deb.debian.org/debian trixie/main armhf bsdextrautils armhf 2.39.3-6 [81.2 kB] Get: 34 http://deb.debian.org/debian trixie/main armhf libpipeline1 armhf 1.5.7-2 [33.3 kB] Get: 35 http://deb.debian.org/debian trixie/main armhf man-db armhf 2.12.0-3 [1367 kB] Get: 36 http://deb.debian.org/debian trixie/main armhf m4 armhf 1.4.19-4 [264 kB] Get: 37 http://deb.debian.org/debian trixie/main armhf autoconf all 2.71-3 [332 kB] Get: 38 http://deb.debian.org/debian trixie/main armhf autotools-dev all 20220109.1 [51.6 kB] Get: 39 http://deb.debian.org/debian trixie/main armhf automake all 1:1.16.5-1.3 [823 kB] Get: 40 http://deb.debian.org/debian trixie/main armhf autopoint all 0.21-14 [496 kB] Get: 41 http://deb.debian.org/debian trixie/main armhf libdebhelper-perl all 13.15.3 [88.0 kB] Get: 42 http://deb.debian.org/debian trixie/main armhf libtool all 2.4.7-7 [517 kB] Get: 43 http://deb.debian.org/debian trixie/main armhf dh-autoreconf all 20 [17.1 kB] Get: 44 http://deb.debian.org/debian trixie/main armhf libarchive-zip-perl all 1.68-1 [104 kB] Get: 45 http://deb.debian.org/debian trixie/main armhf libsub-override-perl all 0.10-1 [10.6 kB] Get: 46 http://deb.debian.org/debian trixie/main armhf libfile-stripnondeterminism-perl all 1.13.1-1 [19.4 kB] Get: 47 http://deb.debian.org/debian trixie/main armhf dh-strip-nondeterminism all 1.13.1-1 [8620 B] Get: 48 http://deb.debian.org/debian trixie/main armhf libelf1 armhf 0.190-1+b1 [171 kB] Get: 49 http://deb.debian.org/debian trixie/main armhf dwz armhf 0.15-1 [101 kB] Get: 50 http://deb.debian.org/debian trixie/main armhf libicu72 armhf 72.1-4+b1 [9070 kB] Get: 51 http://deb.debian.org/debian trixie/main armhf libxml2 armhf 2.9.14+dfsg-1.3+b2 [599 kB] Get: 52 http://deb.debian.org/debian trixie/main armhf gettext armhf 0.21-14+b1 [1230 kB] Get: 53 http://deb.debian.org/debian trixie/main armhf intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 54 http://deb.debian.org/debian trixie/main armhf po-debconf all 1.0.21+nmu1 [248 kB] Get: 55 http://deb.debian.org/debian trixie/main armhf debhelper all 13.15.3 [901 kB] Get: 56 http://deb.debian.org/debian trixie/main armhf python3-pkg-resources all 68.1.2-2 [241 kB] Get: 57 http://deb.debian.org/debian trixie/main armhf python3-lib2to3 all 3.11.5-1 [77.5 kB] Get: 58 http://deb.debian.org/debian trixie/main armhf python3-distutils all 3.11.5-1 [131 kB] Get: 59 http://deb.debian.org/debian trixie/main armhf python3-setuptools all 68.1.2-2 [468 kB] Get: 60 http://deb.debian.org/debian trixie/main armhf dh-python all 6.20240422 [107 kB] Get: 61 http://deb.debian.org/debian trixie/main armhf xml-core all 0.19 [20.1 kB] Get: 62 http://deb.debian.org/debian trixie/main armhf sgml-data all 2.0.11+nmu1 [179 kB] Get: 63 http://deb.debian.org/debian trixie/main armhf docbook-xml all 4.5-12 [85.2 kB] Get: 64 http://deb.debian.org/debian trixie/main armhf docbook-xsl all 1.79.2+dfsg-7 [1221 kB] Get: 65 http://deb.debian.org/debian trixie/main armhf libpkgconf3 armhf 1.8.1-1+b2 [31.9 kB] Get: 66 http://deb.debian.org/debian trixie/main armhf libpython3.12-stdlib armhf 3.12.2-1 [1800 kB] Get: 67 http://deb.debian.org/debian trixie/main armhf libxslt1.1 armhf 1.1.35-1 [223 kB] Get: 68 http://deb.debian.org/debian trixie/main armhf pkgconf-bin armhf 1.8.1-1+b2 [28.9 kB] Get: 69 http://deb.debian.org/debian trixie/main armhf pkgconf armhf 1.8.1-1+b2 [26.2 kB] Get: 70 http://deb.debian.org/debian trixie/main armhf pkg-config armhf 1.8.1-1+b2 [14.0 kB] Get: 71 http://deb.debian.org/debian trixie/main armhf python3.12 armhf 3.12.2-1 [653 kB] Get: 72 http://deb.debian.org/debian trixie/main armhf python3-all armhf 3.11.6-1 [1060 B] Get: 73 http://deb.debian.org/debian trixie/main armhf python3-pkgconfig all 1.5.5-2 [7856 B] Get: 74 http://deb.debian.org/debian trixie/main armhf python3-tomlkit all 0.12.4-1 [41.7 kB] Get: 75 http://deb.debian.org/debian trixie/main armhf systemd-dev all 255.4-1 [59.7 kB] Get: 76 http://deb.debian.org/debian trixie/main armhf xsltproc armhf 1.1.35-1 [126 kB] Fetched 32.7 MB in 1s (44.5 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package libpython3.11-minimal:armhf. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19468 files and directories currently installed.) Preparing to unpack .../libpython3.11-minimal_3.11.8-1_armhf.deb ... Unpacking libpython3.11-minimal:armhf (3.11.8-1) ... Selecting previously unselected package libexpat1:armhf. Preparing to unpack .../libexpat1_2.6.2-1_armhf.deb ... Unpacking libexpat1:armhf (2.6.2-1) ... Selecting previously unselected package python3.11-minimal. Preparing to unpack .../python3.11-minimal_3.11.8-1_armhf.deb ... Unpacking python3.11-minimal (3.11.8-1) ... Setting up libpython3.11-minimal:armhf (3.11.8-1) ... Setting up libexpat1:armhf (2.6.2-1) ... Setting up python3.11-minimal (3.11.8-1) ... Selecting previously unselected package python3-minimal. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19784 files and directories currently installed.) Preparing to unpack .../00-python3-minimal_3.11.6-1_armhf.deb ... Unpacking python3-minimal (3.11.6-1) ... Selecting previously unselected package media-types. Preparing to unpack .../01-media-types_10.1.0_all.deb ... Unpacking media-types (10.1.0) ... Selecting previously unselected package netbase. Preparing to unpack .../02-netbase_6.4_all.deb ... Unpacking netbase (6.4) ... Selecting previously unselected package tzdata. Preparing to unpack .../03-tzdata_2024a-1_all.deb ... Unpacking tzdata (2024a-1) ... Selecting previously unselected package libkrb5support0:armhf. Preparing to unpack .../04-libkrb5support0_1.20.1-5+b1_armhf.deb ... Unpacking libkrb5support0:armhf (1.20.1-5+b1) ... Selecting previously unselected package libcom-err2:armhf. Preparing to unpack .../05-libcom-err2_1.47.0-2+b1_armhf.deb ... Unpacking libcom-err2:armhf (1.47.0-2+b1) ... Selecting previously unselected package libk5crypto3:armhf. Preparing to unpack .../06-libk5crypto3_1.20.1-5+b1_armhf.deb ... Unpacking libk5crypto3:armhf (1.20.1-5+b1) ... Selecting previously unselected package libkeyutils1:armhf. Preparing to unpack .../07-libkeyutils1_1.6.3-3_armhf.deb ... Unpacking libkeyutils1:armhf (1.6.3-3) ... Selecting previously unselected package libkrb5-3:armhf. Preparing to unpack .../08-libkrb5-3_1.20.1-5+b1_armhf.deb ... Unpacking libkrb5-3:armhf (1.20.1-5+b1) ... Selecting previously unselected package libgssapi-krb5-2:armhf. Preparing to unpack .../09-libgssapi-krb5-2_1.20.1-5+b1_armhf.deb ... Unpacking libgssapi-krb5-2:armhf (1.20.1-5+b1) ... Selecting previously unselected package libtirpc-common. Preparing to unpack .../10-libtirpc-common_1.3.4+ds-1_all.deb ... Unpacking libtirpc-common (1.3.4+ds-1) ... Selecting previously unselected package libtirpc3:armhf. Preparing to unpack .../11-libtirpc3_1.3.4+ds-1_armhf.deb ... Unpacking libtirpc3:armhf (1.3.4+ds-1) ... Selecting previously unselected package libnsl2:armhf. Preparing to unpack .../12-libnsl2_1.3.0-3_armhf.deb ... Unpacking libnsl2:armhf (1.3.0-3) ... Selecting previously unselected package readline-common. Preparing to unpack .../13-readline-common_8.2-4_all.deb ... Unpacking readline-common (8.2-4) ... Selecting previously unselected package libreadline8:armhf. Preparing to unpack .../14-libreadline8_8.2-3+b1_armhf.deb ... Unpacking libreadline8:armhf (8.2-3+b1) ... Selecting previously unselected package libpython3.11-stdlib:armhf. Preparing to unpack .../15-libpython3.11-stdlib_3.11.8-1_armhf.deb ... Unpacking libpython3.11-stdlib:armhf (3.11.8-1) ... Selecting previously unselected package python3.11. Preparing to unpack .../16-python3.11_3.11.8-1_armhf.deb ... Unpacking python3.11 (3.11.8-1) ... Selecting previously unselected package libpython3-stdlib:armhf. Preparing to unpack .../17-libpython3-stdlib_3.11.6-1_armhf.deb ... Unpacking libpython3-stdlib:armhf (3.11.6-1) ... Setting up python3-minimal (3.11.6-1) ... Selecting previously unselected package python3. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20839 files and directories currently installed.) Preparing to unpack .../00-python3_3.11.6-1_armhf.deb ... Unpacking python3 (3.11.6-1) ... Selecting previously unselected package libpython3.12-minimal:armhf. Preparing to unpack .../01-libpython3.12-minimal_3.12.2-1_armhf.deb ... Unpacking libpython3.12-minimal:armhf (3.12.2-1) ... Selecting previously unselected package python3.12-minimal. Preparing to unpack .../02-python3.12-minimal_3.12.2-1_armhf.deb ... Unpacking python3.12-minimal (3.12.2-1) ... Selecting previously unselected package sgml-base. Preparing to unpack .../03-sgml-base_1.31_all.deb ... Unpacking sgml-base (1.31) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../04-sensible-utils_0.0.22_all.deb ... Unpacking sensible-utils (0.0.22) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../05-libmagic-mgc_1%3a5.45-2+b1_armhf.deb ... Unpacking libmagic-mgc (1:5.45-2+b1) ... Selecting previously unselected package libmagic1:armhf. Preparing to unpack .../06-libmagic1_1%3a5.45-2+b1_armhf.deb ... Unpacking libmagic1:armhf (1:5.45-2+b1) ... Selecting previously unselected package file. Preparing to unpack .../07-file_1%3a5.45-2+b1_armhf.deb ... Unpacking file (1:5.45-2+b1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../08-gettext-base_0.21-14+b1_armhf.deb ... Unpacking gettext-base (0.21-14+b1) ... Selecting previously unselected package libuchardet0:armhf. Preparing to unpack .../09-libuchardet0_0.0.8-1+b1_armhf.deb ... Unpacking libuchardet0:armhf (0.0.8-1+b1) ... Selecting previously unselected package groff-base. Preparing to unpack .../10-groff-base_1.23.0-3_armhf.deb ... Unpacking groff-base (1.23.0-3) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../11-bsdextrautils_2.39.3-6_armhf.deb ... Unpacking bsdextrautils (2.39.3-6) ... Selecting previously unselected package libpipeline1:armhf. Preparing to unpack .../12-libpipeline1_1.5.7-2_armhf.deb ... Unpacking libpipeline1:armhf (1.5.7-2) ... Selecting previously unselected package man-db. Preparing to unpack .../13-man-db_2.12.0-3_armhf.deb ... Unpacking man-db (2.12.0-3) ... Selecting previously unselected package m4. Preparing to unpack .../14-m4_1.4.19-4_armhf.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../15-autoconf_2.71-3_all.deb ... Unpacking autoconf (2.71-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../16-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../17-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../18-autopoint_0.21-14_all.deb ... Unpacking autopoint (0.21-14) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../19-libdebhelper-perl_13.15.3_all.deb ... Unpacking libdebhelper-perl (13.15.3) ... Selecting previously unselected package libtool. Preparing to unpack .../20-libtool_2.4.7-7_all.deb ... Unpacking libtool (2.4.7-7) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../21-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../22-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libsub-override-perl. Preparing to unpack .../23-libsub-override-perl_0.10-1_all.deb ... Unpacking libsub-override-perl (0.10-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../24-libfile-stripnondeterminism-perl_1.13.1-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.13.1-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../25-dh-strip-nondeterminism_1.13.1-1_all.deb ... Unpacking dh-strip-nondeterminism (1.13.1-1) ... Selecting previously unselected package libelf1:armhf. Preparing to unpack .../26-libelf1_0.190-1+b1_armhf.deb ... Unpacking libelf1:armhf (0.190-1+b1) ... Selecting previously unselected package dwz. Preparing to unpack .../27-dwz_0.15-1_armhf.deb ... Unpacking dwz (0.15-1) ... Selecting previously unselected package libicu72:armhf. Preparing to unpack .../28-libicu72_72.1-4+b1_armhf.deb ... Unpacking libicu72:armhf (72.1-4+b1) ... Selecting previously unselected package libxml2:armhf. Preparing to unpack .../29-libxml2_2.9.14+dfsg-1.3+b2_armhf.deb ... Unpacking libxml2:armhf (2.9.14+dfsg-1.3+b2) ... Selecting previously unselected package gettext. Preparing to unpack .../30-gettext_0.21-14+b1_armhf.deb ... Unpacking gettext (0.21-14+b1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../31-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../32-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../33-debhelper_13.15.3_all.deb ... Unpacking debhelper (13.15.3) ... Selecting previously unselected package python3-pkg-resources. Preparing to unpack .../34-python3-pkg-resources_68.1.2-2_all.deb ... Unpacking python3-pkg-resources (68.1.2-2) ... Selecting previously unselected package python3-lib2to3. Preparing to unpack .../35-python3-lib2to3_3.11.5-1_all.deb ... Unpacking python3-lib2to3 (3.11.5-1) ... Selecting previously unselected package python3-distutils. Preparing to unpack .../36-python3-distutils_3.11.5-1_all.deb ... Unpacking python3-distutils (3.11.5-1) ... Selecting previously unselected package python3-setuptools. Preparing to unpack .../37-python3-setuptools_68.1.2-2_all.deb ... Unpacking python3-setuptools (68.1.2-2) ... Selecting previously unselected package dh-python. Preparing to unpack .../38-dh-python_6.20240422_all.deb ... Unpacking dh-python (6.20240422) ... Selecting previously unselected package xml-core. Preparing to unpack .../39-xml-core_0.19_all.deb ... Unpacking xml-core (0.19) ... Selecting previously unselected package sgml-data. Preparing to unpack .../40-sgml-data_2.0.11+nmu1_all.deb ... Unpacking sgml-data (2.0.11+nmu1) ... Selecting previously unselected package docbook-xml. Preparing to unpack .../41-docbook-xml_4.5-12_all.deb ... Unpacking docbook-xml (4.5-12) ... Selecting previously unselected package docbook-xsl. Preparing to unpack .../42-docbook-xsl_1.79.2+dfsg-7_all.deb ... Unpacking docbook-xsl (1.79.2+dfsg-7) ... Selecting previously unselected package libpkgconf3:armhf. Preparing to unpack .../43-libpkgconf3_1.8.1-1+b2_armhf.deb ... Unpacking libpkgconf3:armhf (1.8.1-1+b2) ... Selecting previously unselected package libpython3.12-stdlib:armhf. Preparing to unpack .../44-libpython3.12-stdlib_3.12.2-1_armhf.deb ... Unpacking libpython3.12-stdlib:armhf (3.12.2-1) ... Selecting previously unselected package libxslt1.1:armhf. Preparing to unpack .../45-libxslt1.1_1.1.35-1_armhf.deb ... Unpacking libxslt1.1:armhf (1.1.35-1) ... Selecting previously unselected package pkgconf-bin. Preparing to unpack .../46-pkgconf-bin_1.8.1-1+b2_armhf.deb ... Unpacking pkgconf-bin (1.8.1-1+b2) ... Selecting previously unselected package pkgconf:armhf. Preparing to unpack .../47-pkgconf_1.8.1-1+b2_armhf.deb ... Unpacking pkgconf:armhf (1.8.1-1+b2) ... Selecting previously unselected package pkg-config:armhf. Preparing to unpack .../48-pkg-config_1.8.1-1+b2_armhf.deb ... Unpacking pkg-config:armhf (1.8.1-1+b2) ... Selecting previously unselected package python3.12. Preparing to unpack .../49-python3.12_3.12.2-1_armhf.deb ... Unpacking python3.12 (3.12.2-1) ... Selecting previously unselected package python3-all. Preparing to unpack .../50-python3-all_3.11.6-1_armhf.deb ... Unpacking python3-all (3.11.6-1) ... Selecting previously unselected package python3-pkgconfig. Preparing to unpack .../51-python3-pkgconfig_1.5.5-2_all.deb ... Unpacking python3-pkgconfig (1.5.5-2) ... Selecting previously unselected package python3-tomlkit. Preparing to unpack .../52-python3-tomlkit_0.12.4-1_all.deb ... Unpacking python3-tomlkit (0.12.4-1) ... Selecting previously unselected package systemd-dev. Preparing to unpack .../53-systemd-dev_255.4-1_all.deb ... Unpacking systemd-dev (255.4-1) ... Selecting previously unselected package xsltproc. Preparing to unpack .../54-xsltproc_1.1.35-1_armhf.deb ... Unpacking xsltproc (1.1.35-1) ... Setting up media-types (10.1.0) ... Setting up libpipeline1:armhf (1.5.7-2) ... Setting up libkeyutils1:armhf (1.6.3-3) ... Setting up libicu72:armhf (72.1-4+b1) ... Setting up bsdextrautils (2.39.3-6) ... Setting up libmagic-mgc (1:5.45-2+b1) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libtirpc-common (1.3.4+ds-1) ... Setting up libdebhelper-perl (13.15.3) ... Setting up libpython3.12-minimal:armhf (3.12.2-1) ... Setting up libmagic1:armhf (1:5.45-2+b1) ... Setting up gettext-base (0.21-14+b1) ... Setting up m4 (1.4.19-4) ... Setting up systemd-dev (255.4-1) ... Setting up libcom-err2:armhf (1.47.0-2+b1) ... Setting up file (1:5.45-2+b1) ... Setting up libkrb5support0:armhf (1.20.1-5+b1) ... Setting up tzdata (2024a-1) ... Current default time zone: 'Etc/UTC' Local time is now: Thu Apr 25 17:15:57 UTC 2024. Universal Time is now: Thu Apr 25 17:15:57 UTC 2024. Run 'dpkg-reconfigure tzdata' if you wish to change it. Setting up autotools-dev (20220109.1) ... Setting up libpkgconf3:armhf (1.8.1-1+b2) ... Setting up autopoint (0.21-14) ... Setting up pkgconf-bin (1.8.1-1+b2) ... Setting up libk5crypto3:armhf (1.20.1-5+b1) ... Setting up autoconf (2.71-3) ... Setting up sensible-utils (0.0.22) ... Setting up libuchardet0:armhf (0.0.8-1+b1) ... Setting up libsub-override-perl (0.10-1) ... Setting up netbase (6.4) ... Setting up sgml-base (1.31) ... Setting up libkrb5-3:armhf (1.20.1-5+b1) ... Setting up libelf1:armhf (0.190-1+b1) ... Setting up readline-common (8.2-4) ... Setting up libxml2:armhf (2.9.14+dfsg-1.3+b2) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.13.1-1) ... Setting up python3.12-minimal (3.12.2-1) ... Setting up gettext (0.21-14+b1) ... Setting up libtool (2.4.7-7) ... Setting up libreadline8:armhf (8.2-3+b1) ... Setting up pkgconf:armhf (1.8.1-1+b2) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up libgssapi-krb5-2:armhf (1.20.1-5+b1) ... Setting up pkg-config:armhf (1.8.1-1+b2) ... Setting up dh-strip-nondeterminism (1.13.1-1) ... Setting up dwz (0.15-1) ... Setting up groff-base (1.23.0-3) ... Setting up xml-core (0.19) ... Setting up libxslt1.1:armhf (1.1.35-1) ... Setting up libtirpc3:armhf (1.3.4+ds-1) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up xsltproc (1.1.35-1) ... Setting up man-db (2.12.0-3) ... Not building database; man-db/auto-update is not 'true'. Setting up libnsl2:armhf (1.3.0-3) ... Setting up libpython3.12-stdlib:armhf (3.12.2-1) ... Setting up libpython3.11-stdlib:armhf (3.11.8-1) ... Setting up python3.12 (3.12.2-1) ... Setting up debhelper (13.15.3) ... Setting up libpython3-stdlib:armhf (3.11.6-1) ... Setting up python3.11 (3.11.8-1) ... Setting up python3 (3.11.6-1) ... Setting up python3-pkgconfig (1.5.5-2) ... Setting up python3-tomlkit (0.12.4-1) ... Setting up python3-lib2to3 (3.11.5-1) ... Setting up python3-pkg-resources (68.1.2-2) ... Setting up python3-distutils (3.11.5-1) ... python3.12: can't get files for byte-compilation Setting up python3-setuptools (68.1.2-2) ... Setting up python3-all (3.11.6-1) ... Setting up dh-python (6.20240422) ... Processing triggers for libc-bin (2.37-18) ... Processing triggers for sgml-base (1.31) ... Setting up sgml-data (2.0.11+nmu1) ... Setting up docbook-xsl (1.79.2+dfsg-7) ... Processing triggers for sgml-base (1.31) ... Setting up docbook-xml (4.5-12) ... Processing triggers for sgml-base (1.31) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/reproducible-path/debspawn-0.6.4/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../debspawn_0.6.4-1_source.changes dpkg-buildpackage: info: source package debspawn dpkg-buildpackage: info: source version 0.6.4-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Matthias Klumpp dpkg-source --before-build . dpkg-buildpackage: info: host architecture armhf debian/rules clean dh clean --with python3 --buildsystem=pybuild dh_auto_clean -O--buildsystem=pybuild I: pybuild base:311: python3.12 setup.py clean /usr/lib/python3/dist-packages/setuptools/config/_apply_pyprojecttoml.py:73: _WouldIgnoreField: `dependencies` defined outside of `pyproject.toml` would be ignored. !! ******************************************************************************** ########################################################################## # configuration would be ignored/result in error due to `pyproject.toml` # ########################################################################## The following seems to be defined outside of `pyproject.toml`: `dependencies = ['tomlkit>=0.8']` According to the spec (see the link below), however, setuptools CANNOT consider this value unless `dependencies` is listed as `dynamic`. https://packaging.python.org/en/latest/specifications/declaring-project-metadata/ For the time being, `setuptools` will still consider the given value (as a **transitional** measure), but please note that future releases of setuptools will follow strictly the standard. To prevent this warning, you can list `dependencies` under `dynamic` or alternatively remove the `[project]` table from your file and rely entirely on other means of configuration. This deprecation is overdue, please update your project and remove deprecated calls to avoid build errors in the future. ******************************************************************************** !! _handle_missing_dynamic(dist, project_table) running clean removing '/build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.12/build' (and everything under it) 'build/bdist.linux-armv7l' does not exist -- can't clean it 'build/scripts-3.12' does not exist -- can't clean it I: pybuild base:311: python3.11 setup.py clean /usr/lib/python3/dist-packages/setuptools/config/_apply_pyprojecttoml.py:73: _WouldIgnoreField: `dependencies` defined outside of `pyproject.toml` would be ignored. !! ******************************************************************************** ########################################################################## # configuration would be ignored/result in error due to `pyproject.toml` # ########################################################################## The following seems to be defined outside of `pyproject.toml`: `dependencies = ['tomlkit>=0.8']` According to the spec (see the link below), however, setuptools CANNOT consider this value unless `dependencies` is listed as `dynamic`. https://packaging.python.org/en/latest/specifications/declaring-project-metadata/ For the time being, `setuptools` will still consider the given value (as a **transitional** measure), but please note that future releases of setuptools will follow strictly the standard. To prevent this warning, you can list `dependencies` under `dynamic` or alternatively remove the `[project]` table from your file and rely entirely on other means of configuration. This deprecation is overdue, please update your project and remove deprecated calls to avoid build errors in the future. ******************************************************************************** !! _handle_missing_dynamic(dist, project_table) running clean removing '/build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.11/build' (and everything under it) 'build/bdist.linux-armv7l' does not exist -- can't clean it 'build/scripts-3.11' does not exist -- can't clean it dh_autoreconf_clean -O--buildsystem=pybuild dh_clean -O--buildsystem=pybuild debian/rules binary dh binary --with python3 --buildsystem=pybuild dh_update_autotools_config -O--buildsystem=pybuild dh_autoreconf -O--buildsystem=pybuild dh_auto_configure -O--buildsystem=pybuild I: pybuild base:311: python3.12 setup.py config /usr/lib/python3/dist-packages/setuptools/config/_apply_pyprojecttoml.py:73: _WouldIgnoreField: `dependencies` defined outside of `pyproject.toml` would be ignored. !! ******************************************************************************** ########################################################################## # configuration would be ignored/result in error due to `pyproject.toml` # ########################################################################## The following seems to be defined outside of `pyproject.toml`: `dependencies = ['tomlkit>=0.8']` According to the spec (see the link below), however, setuptools CANNOT consider this value unless `dependencies` is listed as `dynamic`. https://packaging.python.org/en/latest/specifications/declaring-project-metadata/ For the time being, `setuptools` will still consider the given value (as a **transitional** measure), but please note that future releases of setuptools will follow strictly the standard. To prevent this warning, you can list `dependencies` under `dynamic` or alternatively remove the `[project]` table from your file and rely entirely on other means of configuration. This deprecation is overdue, please update your project and remove deprecated calls to avoid build errors in the future. ******************************************************************************** !! _handle_missing_dynamic(dist, project_table) running config I: pybuild base:311: python3.11 setup.py config /usr/lib/python3/dist-packages/setuptools/config/_apply_pyprojecttoml.py:73: _WouldIgnoreField: `dependencies` defined outside of `pyproject.toml` would be ignored. !! ******************************************************************************** ########################################################################## # configuration would be ignored/result in error due to `pyproject.toml` # ########################################################################## The following seems to be defined outside of `pyproject.toml`: `dependencies = ['tomlkit>=0.8']` According to the spec (see the link below), however, setuptools CANNOT consider this value unless `dependencies` is listed as `dynamic`. https://packaging.python.org/en/latest/specifications/declaring-project-metadata/ For the time being, `setuptools` will still consider the given value (as a **transitional** measure), but please note that future releases of setuptools will follow strictly the standard. To prevent this warning, you can list `dependencies` under `dynamic` or alternatively remove the `[project]` table from your file and rely entirely on other means of configuration. This deprecation is overdue, please update your project and remove deprecated calls to avoid build errors in the future. ******************************************************************************** !! _handle_missing_dynamic(dist, project_table) running config dh_auto_build -O--buildsystem=pybuild I: pybuild base:311: /usr/bin/python3.12 setup.py build /usr/lib/python3/dist-packages/setuptools/config/_apply_pyprojecttoml.py:73: _WouldIgnoreField: `dependencies` defined outside of `pyproject.toml` would be ignored. !! ******************************************************************************** ########################################################################## # configuration would be ignored/result in error due to `pyproject.toml` # ########################################################################## The following seems to be defined outside of `pyproject.toml`: `dependencies = ['tomlkit>=0.8']` According to the spec (see the link below), however, setuptools CANNOT consider this value unless `dependencies` is listed as `dynamic`. https://packaging.python.org/en/latest/specifications/declaring-project-metadata/ For the time being, `setuptools` will still consider the given value (as a **transitional** measure), but please note that future releases of setuptools will follow strictly the standard. To prevent this warning, you can list `dependencies` under `dynamic` or alternatively remove the `[project]` table from your file and rely entirely on other means of configuration. This deprecation is overdue, please update your project and remove deprecated calls to avoid build errors in the future. ******************************************************************************** !! _handle_missing_dynamic(dist, project_table) running build running build_py creating /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.12/build/debspawn copying debspawn/maintain.py -> /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.12/build/debspawn copying debspawn/osbase.py -> /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.12/build/debspawn copying debspawn/aptcache.py -> /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.12/build/debspawn copying debspawn/config.py -> /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.12/build/debspawn copying debspawn/__init__.py -> /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.12/build/debspawn copying debspawn/injectpkg.py -> /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.12/build/debspawn copying debspawn/cli.py -> /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.12/build/debspawn copying debspawn/nspawn.py -> /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.12/build/debspawn copying debspawn/build.py -> /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.12/build/debspawn creating /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.12/build/debspawn/utils copying debspawn/utils/misc.py -> /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.12/build/debspawn/utils copying debspawn/utils/zstd_tar.py -> /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.12/build/debspawn/utils copying debspawn/utils/log.py -> /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.12/build/debspawn/utils copying debspawn/utils/command.py -> /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.12/build/debspawn/utils copying debspawn/utils/__init__.py -> /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.12/build/debspawn/utils copying debspawn/utils/env.py -> /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.12/build/debspawn/utils running egg_info creating debspawn.egg-info writing debspawn.egg-info/PKG-INFO writing dependency_links to debspawn.egg-info/dependency_links.txt writing requirements to debspawn.egg-info/requires.txt writing top-level names to debspawn.egg-info/top_level.txt writing manifest file 'debspawn.egg-info/SOURCES.txt' reading manifest file 'debspawn.egg-info/SOURCES.txt' reading manifest template 'MANIFEST.in' adding license file 'LICENSE' adding license file 'AUTHORS' writing manifest file 'debspawn.egg-info/SOURCES.txt' copying debspawn/dsrun -> /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.12/build/debspawn running build_scripts creating build creating build/scripts-3.12 copying and adjusting debspawn.py -> build/scripts-3.12 changing mode of build/scripts-3.12/debspawn.py from 644 to 755 I: pybuild base:311: /usr/bin/python3 setup.py build /usr/lib/python3/dist-packages/setuptools/config/_apply_pyprojecttoml.py:73: _WouldIgnoreField: `dependencies` defined outside of `pyproject.toml` would be ignored. !! ******************************************************************************** ########################################################################## # configuration would be ignored/result in error due to `pyproject.toml` # ########################################################################## The following seems to be defined outside of `pyproject.toml`: `dependencies = ['tomlkit>=0.8']` According to the spec (see the link below), however, setuptools CANNOT consider this value unless `dependencies` is listed as `dynamic`. https://packaging.python.org/en/latest/specifications/declaring-project-metadata/ For the time being, `setuptools` will still consider the given value (as a **transitional** measure), but please note that future releases of setuptools will follow strictly the standard. To prevent this warning, you can list `dependencies` under `dynamic` or alternatively remove the `[project]` table from your file and rely entirely on other means of configuration. This deprecation is overdue, please update your project and remove deprecated calls to avoid build errors in the future. ******************************************************************************** !! _handle_missing_dynamic(dist, project_table) running build running build_py creating /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.11/build/debspawn copying debspawn/maintain.py -> /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.11/build/debspawn copying debspawn/osbase.py -> /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.11/build/debspawn copying debspawn/aptcache.py -> /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.11/build/debspawn copying debspawn/config.py -> /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.11/build/debspawn copying debspawn/__init__.py -> /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.11/build/debspawn copying debspawn/injectpkg.py -> /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.11/build/debspawn copying debspawn/cli.py -> /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.11/build/debspawn copying debspawn/nspawn.py -> /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.11/build/debspawn copying debspawn/build.py -> /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.11/build/debspawn creating /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.11/build/debspawn/utils copying debspawn/utils/misc.py -> /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.11/build/debspawn/utils copying debspawn/utils/zstd_tar.py -> /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.11/build/debspawn/utils copying debspawn/utils/log.py -> /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.11/build/debspawn/utils copying debspawn/utils/command.py -> /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.11/build/debspawn/utils copying debspawn/utils/__init__.py -> /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.11/build/debspawn/utils copying debspawn/utils/env.py -> /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.11/build/debspawn/utils running egg_info writing debspawn.egg-info/PKG-INFO writing dependency_links to debspawn.egg-info/dependency_links.txt writing requirements to debspawn.egg-info/requires.txt writing top-level names to debspawn.egg-info/top_level.txt reading manifest file 'debspawn.egg-info/SOURCES.txt' reading manifest template 'MANIFEST.in' adding license file 'LICENSE' adding license file 'AUTHORS' writing manifest file 'debspawn.egg-info/SOURCES.txt' copying debspawn/dsrun -> /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.11/build/debspawn running build_scripts creating build/scripts-3.11 copying and adjusting debspawn.py -> build/scripts-3.11 changing mode of build/scripts-3.11/debspawn.py from 644 to 755 dh_auto_test -O--buildsystem=pybuild I: pybuild base:311: cd /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.12/build; python3.12 -m unittest discover -v ---------------------------------------------------------------------- Ran 0 tests in 0.000s NO TESTS RAN I: pybuild base:311: cd /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.11/build; python3.11 -m unittest discover -v ---------------------------------------------------------------------- Ran 0 tests in 0.000s OK create-stamp debian/debhelper-build-stamp dh_testroot -O--buildsystem=pybuild dh_prep -O--buildsystem=pybuild dh_auto_install --destdir=debian/debspawn/ -O--buildsystem=pybuild I: pybuild base:311: /usr/bin/python3.12 setup.py install --root /build/reproducible-path/debspawn-0.6.4/debian/debspawn /usr/lib/python3/dist-packages/setuptools/config/_apply_pyprojecttoml.py:73: _WouldIgnoreField: `dependencies` defined outside of `pyproject.toml` would be ignored. !! ******************************************************************************** ########################################################################## # configuration would be ignored/result in error due to `pyproject.toml` # ########################################################################## The following seems to be defined outside of `pyproject.toml`: `dependencies = ['tomlkit>=0.8']` According to the spec (see the link below), however, setuptools CANNOT consider this value unless `dependencies` is listed as `dynamic`. https://packaging.python.org/en/latest/specifications/declaring-project-metadata/ For the time being, `setuptools` will still consider the given value (as a **transitional** measure), but please note that future releases of setuptools will follow strictly the standard. To prevent this warning, you can list `dependencies` under `dynamic` or alternatively remove the `[project]` table from your file and rely entirely on other means of configuration. This deprecation is overdue, please update your project and remove deprecated calls to avoid build errors in the future. ******************************************************************************** !! _handle_missing_dynamic(dist, project_table) running install /usr/lib/python3/dist-packages/setuptools/_distutils/cmd.py:66: SetuptoolsDeprecationWarning: setup.py install is deprecated. !! ******************************************************************************** Please avoid running ``setup.py`` directly. Instead, use pypa/build, pypa/installer or other standards-based tools. See https://blog.ganssle.io/articles/2021/10/setup-py-deprecated.html for details. ******************************************************************************** !! self.initialize_options() running build running build_py running egg_info writing debspawn.egg-info/PKG-INFO writing dependency_links to debspawn.egg-info/dependency_links.txt writing requirements to debspawn.egg-info/requires.txt writing top-level names to debspawn.egg-info/top_level.txt reading manifest file 'debspawn.egg-info/SOURCES.txt' reading manifest template 'MANIFEST.in' adding license file 'LICENSE' adding license file 'AUTHORS' writing manifest file 'debspawn.egg-info/SOURCES.txt' running build_scripts running install_lib creating /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr creating /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib creating /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.12 creating /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.12/dist-packages creating /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.12/dist-packages/debspawn copying /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.12/build/debspawn/maintain.py -> /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.12/dist-packages/debspawn copying /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.12/build/debspawn/osbase.py -> /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.12/dist-packages/debspawn copying /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.12/build/debspawn/aptcache.py -> /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.12/dist-packages/debspawn copying /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.12/build/debspawn/dsrun -> /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.12/dist-packages/debspawn creating /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.12/dist-packages/debspawn/utils copying /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.12/build/debspawn/utils/misc.py -> /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.12/dist-packages/debspawn/utils copying /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.12/build/debspawn/utils/zstd_tar.py -> /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.12/dist-packages/debspawn/utils copying /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.12/build/debspawn/utils/log.py -> /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.12/dist-packages/debspawn/utils copying /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.12/build/debspawn/utils/command.py -> /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.12/dist-packages/debspawn/utils copying /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.12/build/debspawn/utils/__init__.py -> /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.12/dist-packages/debspawn/utils copying /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.12/build/debspawn/utils/env.py -> /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.12/dist-packages/debspawn/utils creating /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.12/dist-packages/debspawn/utils/__pycache__ copying /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.12/build/debspawn/utils/__pycache__/__init__.cpython-312.pyc -> /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.12/dist-packages/debspawn/utils/__pycache__ copying /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.12/build/debspawn/utils/__pycache__/command.cpython-312.pyc -> /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.12/dist-packages/debspawn/utils/__pycache__ copying /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.12/build/debspawn/utils/__pycache__/log.cpython-312.pyc -> /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.12/dist-packages/debspawn/utils/__pycache__ copying /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.12/build/debspawn/utils/__pycache__/zstd_tar.cpython-312.pyc -> /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.12/dist-packages/debspawn/utils/__pycache__ copying /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.12/build/debspawn/utils/__pycache__/misc.cpython-312.pyc -> /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.12/dist-packages/debspawn/utils/__pycache__ copying /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.12/build/debspawn/utils/__pycache__/env.cpython-312.pyc -> /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.12/dist-packages/debspawn/utils/__pycache__ copying /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.12/build/debspawn/config.py -> /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.12/dist-packages/debspawn copying /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.12/build/debspawn/__init__.py -> /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.12/dist-packages/debspawn copying /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.12/build/debspawn/injectpkg.py -> /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.12/dist-packages/debspawn copying /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.12/build/debspawn/cli.py -> /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.12/dist-packages/debspawn creating /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.12/dist-packages/debspawn/__pycache__ copying /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.12/build/debspawn/__pycache__/injectpkg.cpython-312.pyc -> /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.12/dist-packages/debspawn/__pycache__ copying /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.12/build/debspawn/__pycache__/nspawn.cpython-312.pyc -> /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.12/dist-packages/debspawn/__pycache__ copying /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.12/build/debspawn/__pycache__/aptcache.cpython-312.pyc -> /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.12/dist-packages/debspawn/__pycache__ copying /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.12/build/debspawn/__pycache__/__init__.cpython-312.pyc -> /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.12/dist-packages/debspawn/__pycache__ copying /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.12/build/debspawn/__pycache__/osbase.cpython-312.pyc -> /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.12/dist-packages/debspawn/__pycache__ copying /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.12/build/debspawn/__pycache__/config.cpython-312.pyc -> /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.12/dist-packages/debspawn/__pycache__ copying /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.12/build/debspawn/nspawn.py -> /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.12/dist-packages/debspawn copying /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.12/build/debspawn/build.py -> /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.12/dist-packages/debspawn byte-compiling /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.12/dist-packages/debspawn/maintain.py to maintain.cpython-312.pyc byte-compiling /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.12/dist-packages/debspawn/osbase.py to osbase.cpython-312.pyc byte-compiling /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.12/dist-packages/debspawn/aptcache.py to aptcache.cpython-312.pyc byte-compiling /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.12/dist-packages/debspawn/utils/misc.py to misc.cpython-312.pyc byte-compiling /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.12/dist-packages/debspawn/utils/zstd_tar.py to zstd_tar.cpython-312.pyc byte-compiling /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.12/dist-packages/debspawn/utils/log.py to log.cpython-312.pyc byte-compiling /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.12/dist-packages/debspawn/utils/command.py to command.cpython-312.pyc byte-compiling /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.12/dist-packages/debspawn/utils/__init__.py to __init__.cpython-312.pyc byte-compiling /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.12/dist-packages/debspawn/utils/env.py to env.cpython-312.pyc byte-compiling /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.12/dist-packages/debspawn/config.py to config.cpython-312.pyc byte-compiling /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.12/dist-packages/debspawn/__init__.py to __init__.cpython-312.pyc byte-compiling /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.12/dist-packages/debspawn/injectpkg.py to injectpkg.cpython-312.pyc byte-compiling /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.12/dist-packages/debspawn/cli.py to cli.cpython-312.pyc byte-compiling /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.12/dist-packages/debspawn/nspawn.py to nspawn.cpython-312.pyc byte-compiling /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.12/dist-packages/debspawn/build.py to build.cpython-312.pyc running install_egg_info Copying debspawn.egg-info to /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.12/dist-packages/debspawn-0.6.4.egg-info Skipping SOURCES.txt running install_scripts creating /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/bin copying build/scripts-3.12/debspawn.py -> /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/bin/debspawn Checking dependencies Generating manual pages Generating manual page debspawn.1 Generating manual page debspawn-create.1 Generating manual page debspawn-delete.1 Generating manual page debspawn-update.1 Generating manual page debspawn-list.1 Generating manual page debspawn-build.1 Generating manual page debspawn-login.1 Generating manual page debspawn-run.1 Generating manual page debspawn-maintain.1 Installing data debspawn.conf /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/tmpfiles.d/debspawn.conf debspawn-clear-caches.timer /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/systemd/system/debspawn-clear-caches.timer debspawn-clear-caches.service /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/systemd/system/debspawn-clear-caches.service debspawn.1 /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/share/man/man1/debspawn.1 debspawn-create.1 /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/share/man/man1/debspawn-create.1 debspawn-delete.1 /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/share/man/man1/debspawn-delete.1 debspawn-update.1 /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/share/man/man1/debspawn-update.1 debspawn-list.1 /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/share/man/man1/debspawn-list.1 debspawn-build.1 /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/share/man/man1/debspawn-build.1 debspawn-login.1 /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/share/man/man1/debspawn-login.1 debspawn-run.1 /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/share/man/man1/debspawn-run.1 debspawn-maintain.1 /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/share/man/man1/debspawn-maintain.1 I: pybuild base:311: /usr/bin/python3 setup.py install --root /build/reproducible-path/debspawn-0.6.4/debian/debspawn /usr/lib/python3/dist-packages/setuptools/config/_apply_pyprojecttoml.py:73: _WouldIgnoreField: `dependencies` defined outside of `pyproject.toml` would be ignored. !! ******************************************************************************** ########################################################################## # configuration would be ignored/result in error due to `pyproject.toml` # ########################################################################## The following seems to be defined outside of `pyproject.toml`: `dependencies = ['tomlkit>=0.8']` According to the spec (see the link below), however, setuptools CANNOT consider this value unless `dependencies` is listed as `dynamic`. https://packaging.python.org/en/latest/specifications/declaring-project-metadata/ For the time being, `setuptools` will still consider the given value (as a **transitional** measure), but please note that future releases of setuptools will follow strictly the standard. To prevent this warning, you can list `dependencies` under `dynamic` or alternatively remove the `[project]` table from your file and rely entirely on other means of configuration. This deprecation is overdue, please update your project and remove deprecated calls to avoid build errors in the future. ******************************************************************************** !! _handle_missing_dynamic(dist, project_table) running install /usr/lib/python3/dist-packages/setuptools/_distutils/cmd.py:66: SetuptoolsDeprecationWarning: setup.py install is deprecated. !! ******************************************************************************** Please avoid running ``setup.py`` directly. Instead, use pypa/build, pypa/installer or other standards-based tools. See https://blog.ganssle.io/articles/2021/10/setup-py-deprecated.html for details. ******************************************************************************** !! self.initialize_options() running build running build_py running egg_info writing debspawn.egg-info/PKG-INFO writing dependency_links to debspawn.egg-info/dependency_links.txt writing requirements to debspawn.egg-info/requires.txt writing top-level names to debspawn.egg-info/top_level.txt reading manifest file 'debspawn.egg-info/SOURCES.txt' reading manifest template 'MANIFEST.in' adding license file 'LICENSE' adding license file 'AUTHORS' writing manifest file 'debspawn.egg-info/SOURCES.txt' running build_scripts running install_lib creating /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.11 creating /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.11/dist-packages creating /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.11/dist-packages/debspawn copying /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.11/build/debspawn/maintain.py -> /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.11/dist-packages/debspawn copying /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.11/build/debspawn/osbase.py -> /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.11/dist-packages/debspawn copying /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.11/build/debspawn/aptcache.py -> /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.11/dist-packages/debspawn copying /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.11/build/debspawn/dsrun -> /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.11/dist-packages/debspawn creating /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.11/dist-packages/debspawn/utils copying /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.11/build/debspawn/utils/misc.py -> /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.11/dist-packages/debspawn/utils copying /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.11/build/debspawn/utils/zstd_tar.py -> /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.11/dist-packages/debspawn/utils copying /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.11/build/debspawn/utils/log.py -> /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.11/dist-packages/debspawn/utils copying /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.11/build/debspawn/utils/command.py -> /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.11/dist-packages/debspawn/utils copying /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.11/build/debspawn/utils/__init__.py -> /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.11/dist-packages/debspawn/utils copying /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.11/build/debspawn/utils/env.py -> /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.11/dist-packages/debspawn/utils creating /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.11/dist-packages/debspawn/utils/__pycache__ copying /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.11/build/debspawn/utils/__pycache__/env.cpython-311.pyc -> /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.11/dist-packages/debspawn/utils/__pycache__ copying /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.11/build/debspawn/utils/__pycache__/misc.cpython-311.pyc -> /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.11/dist-packages/debspawn/utils/__pycache__ copying /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.11/build/debspawn/utils/__pycache__/log.cpython-311.pyc -> /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.11/dist-packages/debspawn/utils/__pycache__ copying /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.11/build/debspawn/utils/__pycache__/__init__.cpython-311.pyc -> /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.11/dist-packages/debspawn/utils/__pycache__ copying /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.11/build/debspawn/utils/__pycache__/zstd_tar.cpython-311.pyc -> /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.11/dist-packages/debspawn/utils/__pycache__ copying /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.11/build/debspawn/utils/__pycache__/command.cpython-311.pyc -> /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.11/dist-packages/debspawn/utils/__pycache__ copying /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.11/build/debspawn/config.py -> /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.11/dist-packages/debspawn copying /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.11/build/debspawn/__init__.py -> /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.11/dist-packages/debspawn copying /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.11/build/debspawn/injectpkg.py -> /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.11/dist-packages/debspawn copying /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.11/build/debspawn/cli.py -> /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.11/dist-packages/debspawn creating /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.11/dist-packages/debspawn/__pycache__ copying /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.11/build/debspawn/__pycache__/injectpkg.cpython-311.pyc -> /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.11/dist-packages/debspawn/__pycache__ copying /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.11/build/debspawn/__pycache__/nspawn.cpython-311.pyc -> /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.11/dist-packages/debspawn/__pycache__ copying /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.11/build/debspawn/__pycache__/aptcache.cpython-311.pyc -> /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.11/dist-packages/debspawn/__pycache__ copying /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.11/build/debspawn/__pycache__/osbase.cpython-311.pyc -> /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.11/dist-packages/debspawn/__pycache__ copying /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.11/build/debspawn/__pycache__/__init__.cpython-311.pyc -> /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.11/dist-packages/debspawn/__pycache__ copying /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.11/build/debspawn/__pycache__/config.cpython-311.pyc -> /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.11/dist-packages/debspawn/__pycache__ copying /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.11/build/debspawn/nspawn.py -> /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.11/dist-packages/debspawn copying /build/reproducible-path/debspawn-0.6.4/.pybuild/cpython3_3.11/build/debspawn/build.py -> /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.11/dist-packages/debspawn byte-compiling /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.11/dist-packages/debspawn/maintain.py to maintain.cpython-311.pyc byte-compiling /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.11/dist-packages/debspawn/osbase.py to osbase.cpython-311.pyc byte-compiling /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.11/dist-packages/debspawn/aptcache.py to aptcache.cpython-311.pyc byte-compiling /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.11/dist-packages/debspawn/utils/misc.py to misc.cpython-311.pyc byte-compiling /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.11/dist-packages/debspawn/utils/zstd_tar.py to zstd_tar.cpython-311.pyc byte-compiling /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.11/dist-packages/debspawn/utils/log.py to log.cpython-311.pyc byte-compiling /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.11/dist-packages/debspawn/utils/command.py to command.cpython-311.pyc byte-compiling /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.11/dist-packages/debspawn/utils/__init__.py to __init__.cpython-311.pyc byte-compiling /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.11/dist-packages/debspawn/utils/env.py to env.cpython-311.pyc byte-compiling /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.11/dist-packages/debspawn/config.py to config.cpython-311.pyc byte-compiling /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.11/dist-packages/debspawn/__init__.py to __init__.cpython-311.pyc byte-compiling /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.11/dist-packages/debspawn/injectpkg.py to injectpkg.cpython-311.pyc byte-compiling /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.11/dist-packages/debspawn/cli.py to cli.cpython-311.pyc byte-compiling /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.11/dist-packages/debspawn/nspawn.py to nspawn.cpython-311.pyc byte-compiling /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.11/dist-packages/debspawn/build.py to build.cpython-311.pyc running install_egg_info Copying debspawn.egg-info to /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/python3.11/dist-packages/debspawn-0.6.4.egg-info Skipping SOURCES.txt running install_scripts copying build/scripts-3.11/debspawn.py -> /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/bin/debspawn Checking dependencies Generating manual pages Generating manual page debspawn.1 Generating manual page debspawn-create.1 Generating manual page debspawn-delete.1 Generating manual page debspawn-update.1 Generating manual page debspawn-list.1 Generating manual page debspawn-build.1 Generating manual page debspawn-login.1 Generating manual page debspawn-run.1 Generating manual page debspawn-maintain.1 Installing data debspawn.conf /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/tmpfiles.d/debspawn.conf debspawn-clear-caches.timer /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/systemd/system/debspawn-clear-caches.timer debspawn-clear-caches.service /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/lib/systemd/system/debspawn-clear-caches.service debspawn.1 /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/share/man/man1/debspawn.1 debspawn-create.1 /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/share/man/man1/debspawn-create.1 debspawn-delete.1 /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/share/man/man1/debspawn-delete.1 debspawn-update.1 /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/share/man/man1/debspawn-update.1 debspawn-list.1 /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/share/man/man1/debspawn-list.1 debspawn-build.1 /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/share/man/man1/debspawn-build.1 debspawn-login.1 /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/share/man/man1/debspawn-login.1 debspawn-run.1 /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/share/man/man1/debspawn-run.1 debspawn-maintain.1 /build/reproducible-path/debspawn-0.6.4/debian/debspawn/usr/share/man/man1/debspawn-maintain.1 dh_installdocs -O--buildsystem=pybuild dh_installchangelogs -O--buildsystem=pybuild dh_installman -O--buildsystem=pybuild dh_python3 -O--buildsystem=pybuild dh_installinit -O--buildsystem=pybuild dh_installtmpfiles -O--buildsystem=pybuild dh_installsystemd -O--buildsystem=pybuild dh_installsystemduser -O--buildsystem=pybuild dh_perl -O--buildsystem=pybuild dh_link -O--buildsystem=pybuild dh_strip_nondeterminism -O--buildsystem=pybuild dh_compress -O--buildsystem=pybuild dh_fixperms -O--buildsystem=pybuild dh_missing -O--buildsystem=pybuild dh_installdeb -O--buildsystem=pybuild dh_gencontrol -O--buildsystem=pybuild dh_md5sums -O--buildsystem=pybuild dh_builddeb -O--buildsystem=pybuild dpkg-deb: building package 'debspawn' in '../debspawn_0.6.4-1_all.deb'. dpkg-genbuildinfo --build=binary -O../debspawn_0.6.4-1_armhf.buildinfo dpkg-genchanges --build=binary -O../debspawn_0.6.4-1_armhf.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: including full source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/29437 and its subdirectories I: Current time: Thu Apr 25 05:17:14 -12 2024 I: pbuilder-time-stamp: 1714065434 Thu Apr 25 17:17:22 UTC 2024 I: 1st build successful. Starting 2nd build on remote node ff64a-armhf-rb.debian.net. Thu Apr 25 17:17:22 UTC 2024 I: Preparing to do remote build '2' on ff64a-armhf-rb.debian.net. Thu Apr 25 17:23:22 UTC 2024 I: Deleting $TMPDIR on ff64a-armhf-rb.debian.net. Thu Apr 25 17:23:25 UTC 2024 I: debspawn_0.6.4-1_armhf.changes: Format: 1.8 Date: Tue, 20 Feb 2024 21:54:18 +0100 Source: debspawn Binary: debspawn Architecture: all Version: 0.6.4-1 Distribution: unstable Urgency: medium Maintainer: Matthias Klumpp Changed-By: Matthias Klumpp Description: debspawn - Build in nspawn containers Closes: 1060539 Changes: debspawn (0.6.4-1) unstable; urgency=medium . * New upstream version: 0.6.4 * Drop patches: Applied upstream * Switch Build-Depends to systemd-dev (CLoses: #1060539) Checksums-Sha1: f21fc8b3f4ab691d1f9d5b1b8a5b708355ec97ed 58856 debspawn_0.6.4-1_all.deb 94ec76a440a4eabd9762583f74bf3c656c2f8a35 6092 debspawn_0.6.4-1_armhf.buildinfo Checksums-Sha256: 8df3c1886caa47314147da78a0804c9b4f996bfb296e56f59891bcfc5b280411 58856 debspawn_0.6.4-1_all.deb 113d2600b57c968142c83f997d292bcf4e0a9fce2278163045851a13d0d13704 6092 debspawn_0.6.4-1_armhf.buildinfo Files: 59d696fb3d1f9e12e3e9d46499d505e3 58856 utils optional debspawn_0.6.4-1_all.deb dabfc34bc1636ad5fd6ac6cb1348e475 6092 utils optional debspawn_0.6.4-1_armhf.buildinfo Thu Apr 25 17:23:26 UTC 2024 I: diffoscope 265 will be used to compare the two builds: Running as unit: rb-diffoscope-armhf_14-3061.service # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.xykMth4p/debspawn_0.6.4-1.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.xykMth4p/debspawn_0.6.4-1.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.xykMth4p/debspawn_0.6.4-1.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.xykMth4p/b1/debspawn_0.6.4-1_armhf.changes /srv/reproducible-results/rbuild-debian/r-b-build.xykMth4p/b2/debspawn_0.6.4-1_armhf.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.417s) 0.417s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.018s) 0.018s 12 calls diffoscope.comparators.binary.FilesystemFile ## specialize (total time: 0.000s) 0.000s 1 call specialize Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 790ms CPU time consumed: 788ms Thu Apr 25 17:23:28 UTC 2024 I: diffoscope 265 found no differences in the changes files, and a .buildinfo file also exists. Thu Apr 25 17:23:28 UTC 2024 I: debspawn from trixie built successfully and reproducibly on armhf. Thu Apr 25 17:23:29 UTC 2024 I: Submitting .buildinfo files to external archives: Thu Apr 25 17:23:29 UTC 2024 I: Submitting 8.0K b1/debspawn_0.6.4-1_armhf.buildinfo.asc Thu Apr 25 17:23:30 UTC 2024 I: Submitting 8.0K b2/debspawn_0.6.4-1_armhf.buildinfo.asc Thu Apr 25 17:23:30 UTC 2024 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Thu Apr 25 17:23:30 UTC 2024 I: Done submitting .buildinfo files. Thu Apr 25 17:23:31 UTC 2024 I: Removing signed debspawn_0.6.4-1_armhf.buildinfo.asc files: removed './b1/debspawn_0.6.4-1_armhf.buildinfo.asc' removed './b2/debspawn_0.6.4-1_armhf.buildinfo.asc'