Thu Mar 28 04:25:41 UTC 2024 I: starting to build cacti-spine/trixie/armhf on jenkins on '2024-03-28 04:25' Thu Mar 28 04:25:41 UTC 2024 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/armhf_6/1806/console.log Thu Mar 28 04:25:41 UTC 2024 I: Downloading source for trixie/cacti-spine=1.2.25-1 --2024-03-28 04:25:41-- http://deb.debian.org/debian/pool/main/c/cacti-spine/cacti-spine_1.2.25-1.dsc Connecting to 78.137.99.97:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 1805 (1.8K) [text/prs.lines.tag] Saving to: ‘cacti-spine_1.2.25-1.dsc’ 0K . 100% 261M=0s 2024-03-28 04:25:41 (261 MB/s) - ‘cacti-spine_1.2.25-1.dsc’ saved [1805/1805] Thu Mar 28 04:25:41 UTC 2024 I: cacti-spine_1.2.25-1.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Format: 3.0 (quilt) Source: cacti-spine Binary: cacti-spine Architecture: any Version: 1.2.25-1 Maintainer: Cacti Maintainer Uploaders: Paul Gevers , Homepage: https://cacti.net/ Standards-Version: 4.5.1 Vcs-Browser: https://salsa.debian.org/debian/cacti-spine Vcs-Git: https://salsa.debian.org/debian/cacti-spine.git Build-Depends: autoconf, automake, debhelper-compat (= 13), default-libmysqlclient-dev, libssl-dev, libsnmp-dev, libcap-dev, libtool, help2man, po-debconf Package-List: cacti-spine deb web optional arch=any Checksums-Sha1: 410603891120382947c3eb9d969090d06f3a1202 120148 cacti-spine_1.2.25.orig.tar.gz e09556be191ed76a9712fa9609442a04b1be0ed2 14808 cacti-spine_1.2.25-1.debian.tar.xz Checksums-Sha256: dfd17fb72ab9587287d585fe1917152abc87c56df5d828ccb9e406577d5d92f0 120148 cacti-spine_1.2.25.orig.tar.gz ee91b7ce0d2405ad6fe5bfc93184b830ff79477f0bde9683f619ec2efb5fa97f 14808 cacti-spine_1.2.25-1.debian.tar.xz Files: 8bdc8af60481cff2dab773c31c81fd65 120148 cacti-spine_1.2.25.orig.tar.gz c3cb8cbee9e043e67a5adb060ec48b7b 14808 cacti-spine_1.2.25-1.debian.tar.xz Dgit: 5516fc660730524130690b37a1b2a6cdc0533600 debian archive/debian/1.2.25-1 https://git.dgit.debian.org/cacti-spine -----BEGIN PGP SIGNATURE----- iQEzBAEBCAAdFiEEWLZtSHNr6TsFLeZynFyZ6wW9dQoFAmUMKf4ACgkQnFyZ6wW9 dQolgwgAtwgNPPsKjObDMTy1CYM4G+hiUqM49dHxTPlcqjStlAJ2Z16eWRJb0+5Q 3eoQKQNiNQbnYtMkWvTgchfOG5opG/vvNKED7Z+bNbJLqamw1Y85xKL/fcGGmpA8 9nkAjXiIeYH6pFc6NDm6rJLu4voKImwEoe4qv60HqTqZ4zDPSnSqnMLrICk+XJkn 2XtOVPO83fXhUfFT4Chr6ssH3yyss/HXxBAqwPdFhpv2CtEr7m2zA2ObOzdAc4NI ybPO+GG8CSCynCn3C54W0WdXKmsGWG+oQjMTQI0SNigJjuXTPKnf0SQJbzAAk/Pa kn5k/vh0QoCGLdkiR6vfyBLUidtxng== =uS+4 -----END PGP SIGNATURE----- Thu Mar 28 04:25:41 UTC 2024 I: Checking whether the package is not for us Thu Mar 28 04:25:41 UTC 2024 I: Starting 1st build on remote node virt64b-armhf-rb.debian.net. Thu Mar 28 04:25:41 UTC 2024 I: Preparing to do remote build '1' on virt64b-armhf-rb.debian.net. Thu Mar 28 04:28:31 UTC 2024 I: Deleting $TMPDIR on virt64b-armhf-rb.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Wed Mar 27 16:25:58 -12 2024 I: pbuilder-time-stamp: 1711599958 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [cacti-spine_1.2.25-1.dsc] I: copying [./cacti-spine_1.2.25.orig.tar.gz] I: copying [./cacti-spine_1.2.25-1.debian.tar.xz] I: Extracting source gpgv: Signature made Thu Sep 21 11:33:18 2023 gpgv: using RSA key 58B66D48736BE93B052DE6729C5C99EB05BD750A gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./cacti-spine_1.2.25-1.dsc: no acceptable signature found dpkg-source: info: extracting cacti-spine in cacti-spine-1.2.25 dpkg-source: info: unpacking cacti-spine_1.2.25.orig.tar.gz dpkg-source: info: unpacking cacti-spine_1.2.25-1.debian.tar.xz I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/11812/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='armhf' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=3 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='armhf' IFS=' ' INVOCATION_ID='234caf75c4f54857bb4e31259519a432' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='11812' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.Jqk96U2E/pbuilderrc_Khdk --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.Jqk96U2E/b1 --logfile b1/build.log cacti-spine_1.2.25-1.dsc' SUDO_GID='113' SUDO_UID='107' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://10.0.0.15:3142/' I: uname -a Linux virt64b 6.1.0-18-arm64 #1 SMP Debian 6.1.76-1 (2024-02-01) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Mar 26 11:24 /bin -> usr/bin I: user script /srv/workspace/pbuilder/11812/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: armhf Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: autoconf, automake, debhelper-compat (= 13), default-libmysqlclient-dev, libssl-dev, libsnmp-dev, libcap-dev, libtool, help2man, po-debconf dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19577 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on autoconf; however: Package autoconf is not installed. pbuilder-satisfydepends-dummy depends on automake; however: Package automake is not installed. pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on default-libmysqlclient-dev; however: Package default-libmysqlclient-dev is not installed. pbuilder-satisfydepends-dummy depends on libssl-dev; however: Package libssl-dev is not installed. pbuilder-satisfydepends-dummy depends on libsnmp-dev; however: Package libsnmp-dev is not installed. pbuilder-satisfydepends-dummy depends on libcap-dev; however: Package libcap-dev is not installed. pbuilder-satisfydepends-dummy depends on libtool; however: Package libtool is not installed. pbuilder-satisfydepends-dummy depends on help2man; however: Package help2man is not installed. pbuilder-satisfydepends-dummy depends on po-debconf; however: Package po-debconf is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} default-libmysqlclient-dev{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} help2man{a} intltool-debian{a} libarchive-zip-perl{a} libcap-dev{a} libdebhelper-perl{a} libelf1{a} libfile-stripnondeterminism-perl{a} libicu72{a} liblocale-gettext-perl{a} libmagic-mgc{a} libmagic1{a} libmariadb-dev{a} libmariadb-dev-compat{a} libmariadb3{a} libnetsnmptrapd40{a} libpci-dev{a} libpci3{a} libpipeline1{a} libproc2-0{a} libsensors-config{a} libsensors-dev{a} libsensors5{a} libsnmp-base{a} libsnmp-dev{a} libsnmp40{a} libssl-dev{a} libsub-override-perl{a} libtool{a} libuchardet0{a} libudev-dev{a} libwrap0{a} libwrap0-dev{a} libxml2{a} m4{a} man-db{a} mariadb-common{a} mysql-common{a} pci.ids{a} po-debconf{a} procps{a} sensible-utils{a} zlib1g-dev{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl libsnmp-perl lynx psmisc wget 0 packages upgraded, 56 newly installed, 0 to remove and 0 not upgraded. Need to get 28.5 MB of archives. After unpacking 94.3 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main armhf liblocale-gettext-perl armhf 1.07-6+b1 [14.6 kB] Get: 2 http://deb.debian.org/debian trixie/main armhf libproc2-0 armhf 2:4.0.4-4 [55.7 kB] Get: 3 http://deb.debian.org/debian trixie/main armhf procps armhf 2:4.0.4-4 [864 kB] Get: 4 http://deb.debian.org/debian trixie/main armhf sensible-utils all 0.0.22 [22.4 kB] Get: 5 http://deb.debian.org/debian trixie/main armhf libmagic-mgc armhf 1:5.45-2+b1 [314 kB] Get: 6 http://deb.debian.org/debian trixie/main armhf libmagic1 armhf 1:5.45-2+b1 [97.9 kB] Get: 7 http://deb.debian.org/debian trixie/main armhf file armhf 1:5.45-2+b1 [42.2 kB] Get: 8 http://deb.debian.org/debian trixie/main armhf gettext-base armhf 0.21-14+b1 [157 kB] Get: 9 http://deb.debian.org/debian trixie/main armhf libuchardet0 armhf 0.0.8-1+b1 [65.7 kB] Get: 10 http://deb.debian.org/debian trixie/main armhf groff-base armhf 1.23.0-3 [1088 kB] Get: 11 http://deb.debian.org/debian trixie/main armhf bsdextrautils armhf 2.39.3-6 [81.2 kB] Get: 12 http://deb.debian.org/debian trixie/main armhf libpipeline1 armhf 1.5.7-1+b2 [33.4 kB] Get: 13 http://deb.debian.org/debian trixie/main armhf man-db armhf 2.12.0-3 [1367 kB] Get: 14 http://deb.debian.org/debian trixie/main armhf m4 armhf 1.4.19-4 [264 kB] Get: 15 http://deb.debian.org/debian trixie/main armhf autoconf all 2.71-3 [332 kB] Get: 16 http://deb.debian.org/debian trixie/main armhf autotools-dev all 20220109.1 [51.6 kB] Get: 17 http://deb.debian.org/debian trixie/main armhf automake all 1:1.16.5-1.3 [823 kB] Get: 18 http://deb.debian.org/debian trixie/main armhf autopoint all 0.21-14 [496 kB] Get: 19 http://deb.debian.org/debian trixie/main armhf libdebhelper-perl all 13.14.1 [85.6 kB] Get: 20 http://deb.debian.org/debian trixie/main armhf libtool all 2.4.7-7 [517 kB] Get: 21 http://deb.debian.org/debian trixie/main armhf dh-autoreconf all 20 [17.1 kB] Get: 22 http://deb.debian.org/debian trixie/main armhf libarchive-zip-perl all 1.68-1 [104 kB] Get: 23 http://deb.debian.org/debian trixie/main armhf libsub-override-perl all 0.10-1 [10.6 kB] Get: 24 http://deb.debian.org/debian trixie/main armhf libfile-stripnondeterminism-perl all 1.13.1-1 [19.4 kB] Get: 25 http://deb.debian.org/debian trixie/main armhf dh-strip-nondeterminism all 1.13.1-1 [8620 B] Get: 26 http://deb.debian.org/debian trixie/main armhf libelf1 armhf 0.190-1+b1 [171 kB] Get: 27 http://deb.debian.org/debian trixie/main armhf dwz armhf 0.15-1 [101 kB] Get: 28 http://deb.debian.org/debian trixie/main armhf libicu72 armhf 72.1-4+b1 [9070 kB] Get: 29 http://deb.debian.org/debian trixie/main armhf libxml2 armhf 2.9.14+dfsg-1.3+b2 [599 kB] Get: 30 http://deb.debian.org/debian trixie/main armhf gettext armhf 0.21-14+b1 [1230 kB] Get: 31 http://deb.debian.org/debian trixie/main armhf intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 32 http://deb.debian.org/debian trixie/main armhf po-debconf all 1.0.21+nmu1 [248 kB] Get: 33 http://deb.debian.org/debian trixie/main armhf debhelper all 13.14.1 [890 kB] Get: 34 http://deb.debian.org/debian trixie/main armhf mysql-common all 5.8+1.1.0 [6636 B] Get: 35 http://deb.debian.org/debian trixie/main armhf mariadb-common all 1:10.11.6-2 [25.2 kB] Get: 36 http://deb.debian.org/debian trixie/main armhf libmariadb3 armhf 1:10.11.6-2 [157 kB] Get: 37 http://deb.debian.org/debian trixie/main armhf libssl-dev armhf 3.1.5-1 [2152 kB] Get: 38 http://deb.debian.org/debian trixie/main armhf zlib1g-dev armhf 1:1.3.dfsg-3+b1 [904 kB] Get: 39 http://deb.debian.org/debian trixie/main armhf libmariadb-dev armhf 1:10.11.6-2 [249 kB] Get: 40 http://deb.debian.org/debian trixie/main armhf libmariadb-dev-compat armhf 1:10.11.6-2 [24.0 kB] Get: 41 http://deb.debian.org/debian trixie/main armhf default-libmysqlclient-dev armhf 1.1.0+b1 [3376 B] Get: 42 http://deb.debian.org/debian trixie/main armhf help2man armhf 1.49.3 [198 kB] Get: 43 http://deb.debian.org/debian trixie/main armhf libcap-dev armhf 1:2.66-5 [398 kB] Get: 44 http://deb.debian.org/debian trixie/main armhf pci.ids all 0.0~2024.02.02-1 [254 kB] Get: 45 http://deb.debian.org/debian trixie/main armhf libpci3 armhf 1:3.11.1-1 [67.1 kB] Get: 46 http://deb.debian.org/debian trixie/main armhf libsensors-config all 1:3.6.0-9 [14.6 kB] Get: 47 http://deb.debian.org/debian trixie/main armhf libsensors5 armhf 1:3.6.0-9 [31.9 kB] Get: 48 http://deb.debian.org/debian trixie/main armhf libwrap0 armhf 7.6.q-32+b1 [52.9 kB] Get: 49 http://deb.debian.org/debian trixie/main armhf libsnmp-base all 5.9.4+dfsg-1 [1770 kB] Get: 50 http://deb.debian.org/debian trixie/main armhf libsnmp40 armhf 5.9.4+dfsg-1+b2 [2495 kB] Get: 51 http://deb.debian.org/debian trixie/main armhf libnetsnmptrapd40 armhf 5.9.4+dfsg-1+b2 [20.2 kB] Get: 52 http://deb.debian.org/debian trixie/main armhf libudev-dev armhf 255.4-1 [60.9 kB] Get: 53 http://deb.debian.org/debian trixie/main armhf libpci-dev armhf 1:3.11.1-1 [65.4 kB] Get: 54 http://deb.debian.org/debian trixie/main armhf libsensors-dev armhf 1:3.6.0-9 [42.5 kB] Get: 55 http://deb.debian.org/debian trixie/main armhf libwrap0-dev armhf 7.6.q-32+b1 [19.9 kB] Get: 56 http://deb.debian.org/debian trixie/main armhf libsnmp-dev armhf 5.9.4+dfsg-1+b2 [201 kB] Fetched 28.5 MB in 5s (5742 kB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package liblocale-gettext-perl. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19577 files and directories currently installed.) Preparing to unpack .../00-liblocale-gettext-perl_1.07-6+b1_armhf.deb ... Unpacking liblocale-gettext-perl (1.07-6+b1) ... Selecting previously unselected package libproc2-0:armhf. Preparing to unpack .../01-libproc2-0_2%3a4.0.4-4_armhf.deb ... Unpacking libproc2-0:armhf (2:4.0.4-4) ... Selecting previously unselected package procps. Preparing to unpack .../02-procps_2%3a4.0.4-4_armhf.deb ... Unpacking procps (2:4.0.4-4) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../03-sensible-utils_0.0.22_all.deb ... Unpacking sensible-utils (0.0.22) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../04-libmagic-mgc_1%3a5.45-2+b1_armhf.deb ... Unpacking libmagic-mgc (1:5.45-2+b1) ... Selecting previously unselected package libmagic1:armhf. Preparing to unpack .../05-libmagic1_1%3a5.45-2+b1_armhf.deb ... Unpacking libmagic1:armhf (1:5.45-2+b1) ... Selecting previously unselected package file. Preparing to unpack .../06-file_1%3a5.45-2+b1_armhf.deb ... Unpacking file (1:5.45-2+b1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../07-gettext-base_0.21-14+b1_armhf.deb ... Unpacking gettext-base (0.21-14+b1) ... Selecting previously unselected package libuchardet0:armhf. Preparing to unpack .../08-libuchardet0_0.0.8-1+b1_armhf.deb ... Unpacking libuchardet0:armhf (0.0.8-1+b1) ... Selecting previously unselected package groff-base. Preparing to unpack .../09-groff-base_1.23.0-3_armhf.deb ... Unpacking groff-base (1.23.0-3) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../10-bsdextrautils_2.39.3-6_armhf.deb ... Unpacking bsdextrautils (2.39.3-6) ... Selecting previously unselected package libpipeline1:armhf. Preparing to unpack .../11-libpipeline1_1.5.7-1+b2_armhf.deb ... Unpacking libpipeline1:armhf (1.5.7-1+b2) ... Selecting previously unselected package man-db. Preparing to unpack .../12-man-db_2.12.0-3_armhf.deb ... Unpacking man-db (2.12.0-3) ... Selecting previously unselected package m4. Preparing to unpack .../13-m4_1.4.19-4_armhf.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../14-autoconf_2.71-3_all.deb ... Unpacking autoconf (2.71-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../15-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../16-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../17-autopoint_0.21-14_all.deb ... Unpacking autopoint (0.21-14) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../18-libdebhelper-perl_13.14.1_all.deb ... Unpacking libdebhelper-perl (13.14.1) ... Selecting previously unselected package libtool. Preparing to unpack .../19-libtool_2.4.7-7_all.deb ... Unpacking libtool (2.4.7-7) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../20-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../21-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libsub-override-perl. Preparing to unpack .../22-libsub-override-perl_0.10-1_all.deb ... Unpacking libsub-override-perl (0.10-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../23-libfile-stripnondeterminism-perl_1.13.1-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.13.1-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../24-dh-strip-nondeterminism_1.13.1-1_all.deb ... Unpacking dh-strip-nondeterminism (1.13.1-1) ... Selecting previously unselected package libelf1:armhf. Preparing to unpack .../25-libelf1_0.190-1+b1_armhf.deb ... Unpacking libelf1:armhf (0.190-1+b1) ... Selecting previously unselected package dwz. Preparing to unpack .../26-dwz_0.15-1_armhf.deb ... Unpacking dwz (0.15-1) ... Selecting previously unselected package libicu72:armhf. Preparing to unpack .../27-libicu72_72.1-4+b1_armhf.deb ... Unpacking libicu72:armhf (72.1-4+b1) ... Selecting previously unselected package libxml2:armhf. Preparing to unpack .../28-libxml2_2.9.14+dfsg-1.3+b2_armhf.deb ... Unpacking libxml2:armhf (2.9.14+dfsg-1.3+b2) ... Selecting previously unselected package gettext. Preparing to unpack .../29-gettext_0.21-14+b1_armhf.deb ... Unpacking gettext (0.21-14+b1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../30-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../31-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../32-debhelper_13.14.1_all.deb ... Unpacking debhelper (13.14.1) ... Selecting previously unselected package mysql-common. Preparing to unpack .../33-mysql-common_5.8+1.1.0_all.deb ... Unpacking mysql-common (5.8+1.1.0) ... Selecting previously unselected package mariadb-common. Preparing to unpack .../34-mariadb-common_1%3a10.11.6-2_all.deb ... Unpacking mariadb-common (1:10.11.6-2) ... Selecting previously unselected package libmariadb3:armhf. Preparing to unpack .../35-libmariadb3_1%3a10.11.6-2_armhf.deb ... Unpacking libmariadb3:armhf (1:10.11.6-2) ... Selecting previously unselected package libssl-dev:armhf. Preparing to unpack .../36-libssl-dev_3.1.5-1_armhf.deb ... Unpacking libssl-dev:armhf (3.1.5-1) ... Selecting previously unselected package zlib1g-dev:armhf. Preparing to unpack .../37-zlib1g-dev_1%3a1.3.dfsg-3+b1_armhf.deb ... Unpacking zlib1g-dev:armhf (1:1.3.dfsg-3+b1) ... Selecting previously unselected package libmariadb-dev. Preparing to unpack .../38-libmariadb-dev_1%3a10.11.6-2_armhf.deb ... Unpacking libmariadb-dev (1:10.11.6-2) ... Selecting previously unselected package libmariadb-dev-compat. Preparing to unpack .../39-libmariadb-dev-compat_1%3a10.11.6-2_armhf.deb ... Unpacking libmariadb-dev-compat (1:10.11.6-2) ... Selecting previously unselected package default-libmysqlclient-dev:armhf. Preparing to unpack .../40-default-libmysqlclient-dev_1.1.0+b1_armhf.deb ... Unpacking default-libmysqlclient-dev:armhf (1.1.0+b1) ... Selecting previously unselected package help2man. Preparing to unpack .../41-help2man_1.49.3_armhf.deb ... Unpacking help2man (1.49.3) ... Selecting previously unselected package libcap-dev:armhf. Preparing to unpack .../42-libcap-dev_1%3a2.66-5_armhf.deb ... Unpacking libcap-dev:armhf (1:2.66-5) ... Selecting previously unselected package pci.ids. Preparing to unpack .../43-pci.ids_0.0~2024.02.02-1_all.deb ... Unpacking pci.ids (0.0~2024.02.02-1) ... Selecting previously unselected package libpci3:armhf. Preparing to unpack .../44-libpci3_1%3a3.11.1-1_armhf.deb ... Unpacking libpci3:armhf (1:3.11.1-1) ... Selecting previously unselected package libsensors-config. Preparing to unpack .../45-libsensors-config_1%3a3.6.0-9_all.deb ... Unpacking libsensors-config (1:3.6.0-9) ... Selecting previously unselected package libsensors5:armhf. Preparing to unpack .../46-libsensors5_1%3a3.6.0-9_armhf.deb ... Unpacking libsensors5:armhf (1:3.6.0-9) ... Selecting previously unselected package libwrap0:armhf. Preparing to unpack .../47-libwrap0_7.6.q-32+b1_armhf.deb ... Unpacking libwrap0:armhf (7.6.q-32+b1) ... Selecting previously unselected package libsnmp-base. Preparing to unpack .../48-libsnmp-base_5.9.4+dfsg-1_all.deb ... Unpacking libsnmp-base (5.9.4+dfsg-1) ... Selecting previously unselected package libsnmp40:armhf. Preparing to unpack .../49-libsnmp40_5.9.4+dfsg-1+b2_armhf.deb ... Unpacking libsnmp40:armhf (5.9.4+dfsg-1+b2) ... Selecting previously unselected package libnetsnmptrapd40:armhf. Preparing to unpack .../50-libnetsnmptrapd40_5.9.4+dfsg-1+b2_armhf.deb ... Unpacking libnetsnmptrapd40:armhf (5.9.4+dfsg-1+b2) ... Selecting previously unselected package libudev-dev:armhf. Preparing to unpack .../51-libudev-dev_255.4-1_armhf.deb ... Unpacking libudev-dev:armhf (255.4-1) ... Selecting previously unselected package libpci-dev:armhf. Preparing to unpack .../52-libpci-dev_1%3a3.11.1-1_armhf.deb ... Unpacking libpci-dev:armhf (1:3.11.1-1) ... Selecting previously unselected package libsensors-dev:armhf. Preparing to unpack .../53-libsensors-dev_1%3a3.6.0-9_armhf.deb ... Unpacking libsensors-dev:armhf (1:3.6.0-9) ... Selecting previously unselected package libwrap0-dev:armhf. Preparing to unpack .../54-libwrap0-dev_7.6.q-32+b1_armhf.deb ... Unpacking libwrap0-dev:armhf (7.6.q-32+b1) ... Selecting previously unselected package libsnmp-dev. Preparing to unpack .../55-libsnmp-dev_5.9.4+dfsg-1+b2_armhf.deb ... Unpacking libsnmp-dev (5.9.4+dfsg-1+b2) ... Setting up libpipeline1:armhf (1.5.7-1+b2) ... Setting up mysql-common (5.8+1.1.0) ... update-alternatives: using /etc/mysql/my.cnf.fallback to provide /etc/mysql/my.cnf (my.cnf) in auto mode Setting up pci.ids (0.0~2024.02.02-1) ... Setting up libicu72:armhf (72.1-4+b1) ... Setting up bsdextrautils (2.39.3-6) ... Setting up libmagic-mgc (1:5.45-2+b1) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libsnmp-base (5.9.4+dfsg-1) ... Setting up libdebhelper-perl (13.14.1) ... Setting up libsensors-config (1:3.6.0-9) ... Setting up libmagic1:armhf (1:5.45-2+b1) ... Setting up gettext-base (0.21-14+b1) ... Setting up m4 (1.4.19-4) ... Setting up file (1:5.45-2+b1) ... Setting up mariadb-common (1:10.11.6-2) ... update-alternatives: using /etc/mysql/mariadb.cnf to provide /etc/mysql/my.cnf (my.cnf) in auto mode Setting up autotools-dev (20220109.1) ... Setting up libwrap0:armhf (7.6.q-32+b1) ... Setting up libproc2-0:armhf (2:4.0.4-4) ... Setting up libssl-dev:armhf (3.1.5-1) ... Setting up autopoint (0.21-14) ... Setting up libmariadb3:armhf (1:10.11.6-2) ... Setting up libudev-dev:armhf (255.4-1) ... Setting up libsensors5:armhf (1:3.6.0-9) ... Setting up autoconf (2.71-3) ... Setting up zlib1g-dev:armhf (1:1.3.dfsg-3+b1) ... Setting up libpci3:armhf (1:3.11.1-1) ... Setting up sensible-utils (0.0.22) ... Setting up libwrap0-dev:armhf (7.6.q-32+b1) ... Setting up libuchardet0:armhf (0.0.8-1+b1) ... Setting up procps (2:4.0.4-4) ... Setting up libsub-override-perl (0.10-1) ... Setting up libsensors-dev:armhf (1:3.6.0-9) ... Setting up libcap-dev:armhf (1:2.66-5) ... Setting up libelf1:armhf (0.190-1+b1) ... Setting up libxml2:armhf (2.9.14+dfsg-1.3+b2) ... Setting up liblocale-gettext-perl (1.07-6+b1) ... Setting up libpci-dev:armhf (1:3.11.1-1) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.13.1-1) ... Setting up gettext (0.21-14+b1) ... Setting up libtool (2.4.7-7) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up help2man (1.49.3) ... Setting up dh-autoreconf (20) ... Setting up libsnmp40:armhf (5.9.4+dfsg-1+b2) ... Setting up libmariadb-dev (1:10.11.6-2) ... Setting up libnetsnmptrapd40:armhf (5.9.4+dfsg-1+b2) ... Setting up dh-strip-nondeterminism (1.13.1-1) ... Setting up dwz (0.15-1) ... Setting up groff-base (1.23.0-3) ... Setting up libsnmp-dev (5.9.4+dfsg-1+b2) ... Setting up libmariadb-dev-compat (1:10.11.6-2) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.12.0-3) ... Not building database; man-db/auto-update is not 'true'. Setting up default-libmysqlclient-dev:armhf (1.1.0+b1) ... Setting up debhelper (13.14.1) ... Processing triggers for libc-bin (2.37-15) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/reproducible-path/cacti-spine-1.2.25/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../cacti-spine_1.2.25-1_source.changes dpkg-buildpackage: info: source package cacti-spine dpkg-buildpackage: info: source version 1.2.25-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Paul Gevers dpkg-source --before-build . dpkg-buildpackage: info: host architecture armhf dpkg-source: info: using options from cacti-spine-1.2.25/debian/source/options: --extend-diff-ignore=(^|/)(config\.guess|config\.sub|aclocal\.m4|configure|ltmain\.sh|Makefile\.in)$ debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf aclocal: warning: couldn't open directory 'm4': No such file or directory libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, 'config'. libtoolize: copying file 'config/ltmain.sh' libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'. libtoolize: copying file 'm4/libtool.m4' libtoolize: copying file 'm4/ltoptions.m4' libtoolize: copying file 'm4/ltsugar.m4' libtoolize: copying file 'm4/ltversion.m4' libtoolize: copying file 'm4/lt~obsolete.m4' configure.ac:154: warning: The macro `AC_HEADER_TIME' is obsolete. configure.ac:154: You should run autoupdate. ./lib/autoconf/headers.m4:743: AC_HEADER_TIME is expanded from... configure.ac:154: the top level configure.ac:158: warning: your code may safely assume C89 semantics that RETSIGTYPE is void. configure.ac:158: Remove this warning and the `AC_CACHE_CHECK' when you adjust the code. ./lib/autoconf/general.m4:2434: AC_DIAGNOSE is expanded from... configure.ac:158: the top level configure.ac:32: installing 'config/compile' configure.ac:28: installing 'config/config.guess' configure.ac:28: installing 'config/config.sub' configure.ac:34: installing 'config/install-sh' configure.ac:34: installing 'config/missing' Makefile.am: installing 'config/depcomp' debian/rules override_dh_auto_configure make[1]: Entering directory '/build/reproducible-path/cacti-spine-1.2.25' ./configure --host=arm-linux-gnueabihf \ --build=arm-linux-gnueabihf \ --prefix=/usr \ --bindir=/usr/sbin \ --enable-lcap \ ASFLAGS="" ASFLAGS_FOR_BUILD="" CFLAGS="-g -O2 -ffile-prefix-map=/build/reproducible-path/cacti-spine-1.2.25=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security" CFLAGS_FOR_BUILD="-g -O2" CPPFLAGS="-Wdate-time -D_FORTIFY_SOURCE=2" CPPFLAGS_FOR_BUILD="" CXXFLAGS="-g -O2 -ffile-prefix-map=/build/reproducible-path/cacti-spine-1.2.25=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security" CXXFLAGS_FOR_BUILD="-g -O2" DFLAGS="-frelease" DFLAGS_FOR_BUILD="-frelease" FCFLAGS="-g -O2 -ffile-prefix-map=/build/reproducible-path/cacti-spine-1.2.25=. -fstack-protector-strong -fstack-clash-protection" FCFLAGS_FOR_BUILD="-g -O2" FFLAGS="-g -O2 -ffile-prefix-map=/build/reproducible-path/cacti-spine-1.2.25=. -fstack-protector-strong -fstack-clash-protection" FFLAGS_FOR_BUILD="-g -O2" LDFLAGS="-Wl,-z,relro -Wl,-z,now -lpthread -lssl -lm" LDFLAGS_FOR_BUILD="" OBJCFLAGS="-g -O2 -ffile-prefix-map=/build/reproducible-path/cacti-spine-1.2.25=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security" OBJCFLAGS_FOR_BUILD="-g -O2" OBJCXXFLAGS="-g -O2 -ffile-prefix-map=/build/reproducible-path/cacti-spine-1.2.25=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security" OBJCXXFLAGS_FOR_BUILD="-g -O2" checking build system type... arm-unknown-linux-gnueabihf checking host system type... arm-unknown-linux-gnueabihf checking for arm-linux-gnueabihf-gcc... arm-linux-gnueabihf-gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether arm-linux-gnueabihf-gcc accepts -g... yes checking for arm-linux-gnueabihf-gcc option to enable C11 features... none needed checking whether arm-linux-gnueabihf-gcc understands -c and -o together... yes checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a race-free mkdir -p... /usr/bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make supports the include directive... yes (GNU style) checking whether make supports nested variables... yes checking dependency style of arm-linux-gnueabihf-gcc... gcc3 checking for gawk... (cached) mawk checking for arm-linux-gnueabihf-gcc... (cached) arm-linux-gnueabihf-gcc checking whether the compiler supports GNU C... (cached) yes checking whether arm-linux-gnueabihf-gcc accepts -g... (cached) yes checking for arm-linux-gnueabihf-gcc option to enable C11 features... (cached) none needed checking whether arm-linux-gnueabihf-gcc understands -c and -o together... (cached) yes checking how to run the C preprocessor... arm-linux-gnueabihf-gcc -E checking whether ln -s works... yes checking how to print strings... printf checking for a sed that does not truncate output... /usr/bin/sed checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for fgrep... /usr/bin/grep -F checking for ld used by arm-linux-gnueabihf-gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/arm-linux-gnueabihf-nm -B checking the name lister (/usr/bin/arm-linux-gnueabihf-nm -B) interface... BSD nm checking the maximum length of command line arguments... 1572864 checking how to convert arm-unknown-linux-gnueabihf file names to arm-unknown-linux-gnueabihf format... func_convert_file_noop checking how to convert arm-unknown-linux-gnueabihf file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for arm-linux-gnueabihf-file... no checking for file... file checking for arm-linux-gnueabihf-objdump... arm-linux-gnueabihf-objdump checking how to recognize dependent libraries... pass_all checking for arm-linux-gnueabihf-dlltool... no checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for arm-linux-gnueabihf-ar... arm-linux-gnueabihf-ar checking for archiver @FILE support... @ checking for arm-linux-gnueabihf-strip... arm-linux-gnueabihf-strip checking for arm-linux-gnueabihf-ranlib... arm-linux-gnueabihf-ranlib checking command to parse /usr/bin/arm-linux-gnueabihf-nm -B output from arm-linux-gnueabihf-gcc object... ok checking for sysroot... no checking for a working dd... /usr/bin/dd checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1 checking for arm-linux-gnueabihf-mt... no checking for mt... no checking if : is a manifest tool... no checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for sys/time.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if arm-linux-gnueabihf-gcc supports -fno-rtti -fno-exceptions... no checking for arm-linux-gnueabihf-gcc option to produce PIC... -fPIC -DPIC checking if arm-linux-gnueabihf-gcc PIC flag -fPIC -DPIC works... yes checking if arm-linux-gnueabihf-gcc static flag -static works... yes checking if arm-linux-gnueabihf-gcc supports -c -o file.o... yes checking if arm-linux-gnueabihf-gcc supports -c -o file.o... (cached) yes checking whether the arm-linux-gnueabihf-gcc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking whether to enable -Wall... no checking for help2man... /usr/bin/help2man checking for help2man... /usr/bin/help2man checking for socket in -lsocket... no checking for floor in -lm... yes checking for dlclose in -ldl... yes checking for pthread_exit in -lpthread... yes checking for deflate in -lz... yes checking for kstat_close in -lkstat... no checking for CRYPTO_realloc in -lcrypto... yes checking for library containing clock_gettime... none required checking for sys/socket.h... yes checking for sys/select.h... yes checking for sys/wait.h... yes checking for sys/time.h... (cached) yes checking for assert.h... yes checking for ctype.h... yes checking for errno.h... yes checking for signal.h... yes checking for math.h... yes checking for malloc.h... yes checking for netdb.h... yes checking for signal.h... (cached) yes checking for stdarg.h... yes checking for stdio.h... (cached) yes checking for syslog.h... yes checking for netinet/in_systm.h... yes checking for netinet/in.h... yes checking for netinet/ip.h... yes checking for netinet/ip_icmp.h... yes checking for unsigned long long... yes checking for long long... yes checking for an ANSI C-conforming const... yes checking for size_t... yes checking whether struct tm is in sys/time.h or time.h... time.h checking return type of signal handlers... void checking for malloc... yes checking for calloc... yes checking for gettimeofday... yes checking for strerror... yes checking for strtoll... yes checking for priv.h... no checking whether we are using Solaris privileges... no checking for sys/capability.h... yes checking whether we are using Linux Capabilities... yes checking for cap_init in -lcap... yes checking for mysql_init in -lmysqlclient... yes checking if Net-SNMP needs crypto support... yes checking for snmp_timeout in -lnetsnmp... yes checking for the spine results buffer size... 2048 bytes checking for the maximum simultaneous spine scripts... 20 checking for the maximum MySQL buffer size... 131072 checking whether we are using traditional popen... no checking whether to verify net-snmp library vs header versions... no checking if we can support backtracing... yes checking if we can support mysql/mariadb retry count... no checking if we can support mysql/mariadb ssl keys... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating config/config.h config.status: executing depfiles commands config.status: executing libtool commands make[1]: Leaving directory '/build/reproducible-path/cacti-spine-1.2.25' dh_auto_build make -j3 make[1]: Entering directory '/build/reproducible-path/cacti-spine-1.2.25' arm-linux-gnueabihf-gcc -DHAVE_CONFIG_H -I. -I./config -Wdate-time -D_FORTIFY_SOURCE=2 -I/usr/include/net-snmp -I/usr/include/net-snmp/.. -I/usr/include/mysql -g -O2 -ffile-prefix-map=/build/reproducible-path/cacti-spine-1.2.25=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -MT sql.o -MD -MP -MF .deps/sql.Tpo -c -o sql.o sql.c arm-linux-gnueabihf-gcc -DHAVE_CONFIG_H -I. -I./config -Wdate-time -D_FORTIFY_SOURCE=2 -I/usr/include/net-snmp -I/usr/include/net-snmp/.. -I/usr/include/mysql -g -O2 -ffile-prefix-map=/build/reproducible-path/cacti-spine-1.2.25=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -MT spine.o -MD -MP -MF .deps/spine.Tpo -c -o spine.o spine.c arm-linux-gnueabihf-gcc -DHAVE_CONFIG_H -I. -I./config -Wdate-time -D_FORTIFY_SOURCE=2 -I/usr/include/net-snmp -I/usr/include/net-snmp/.. -I/usr/include/mysql -g -O2 -ffile-prefix-map=/build/reproducible-path/cacti-spine-1.2.25=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -MT util.o -MD -MP -MF .deps/util.Tpo -c -o util.o util.c In file included from util.c:35: util.c: In function 'read_config_options': util.c:375:26: warning: format '%s' expects argument of type 'char *', but argument 2 has type 'int' [-Wformat=] 375 | SPINE_LOG_DEBUG(("DEBUG: The binary Cacti version is %s", set.cacti_version)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~ | | | int spine.h:128:103: note: in definition of macro 'SPINE_LOG_DEBUG' 128 | #define SPINE_LOG_DEBUG(format_and_args) (void)(set.log_level >= POLLER_VERBOSITY_DEBUG && spine_log format_and_args) | ^~~~~~~~~~~~~~~ util.c:375:63: note: format string is defined here 375 | SPINE_LOG_DEBUG(("DEBUG: The binary Cacti version is %s", set.cacti_version)); | ~^ | | | char * | %d spine.c: In function 'main': spine.c:477:59: warning: '%s' directive output may be truncated writing up to 4095 bytes into a region of size 2048 [-Wformat-truncation=] 477 | snprintf(conf_file, DBL_BUFSIZE, "%s%s", config_paths[i], DEFAULT_CONF_FILE); | ^~ In file included from /usr/include/stdio.h:906, from common.h:93, from spine.c:97: In function 'snprintf', inlined from 'main' at spine.c:477:4: /usr/include/arm-linux-gnueabihf/bits/stdio2.h:54:10: note: '__builtin___snprintf_chk' output between 11 and 4106 bytes into a destination of size 2048 54 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 55 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 56 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ mv -f .deps/sql.Tpo .deps/sql.Po arm-linux-gnueabihf-gcc -DHAVE_CONFIG_H -I. -I./config -Wdate-time -D_FORTIFY_SOURCE=2 -I/usr/include/net-snmp -I/usr/include/net-snmp/.. -I/usr/include/mysql -g -O2 -ffile-prefix-map=/build/reproducible-path/cacti-spine-1.2.25=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -MT snmp.o -MD -MP -MF .deps/snmp.Tpo -c -o snmp.o snmp.c mv -f .deps/spine.Tpo .deps/spine.Po arm-linux-gnueabihf-gcc -DHAVE_CONFIG_H -I. -I./config -Wdate-time -D_FORTIFY_SOURCE=2 -I/usr/include/net-snmp -I/usr/include/net-snmp/.. -I/usr/include/mysql -g -O2 -ffile-prefix-map=/build/reproducible-path/cacti-spine-1.2.25=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -MT locks.o -MD -MP -MF .deps/locks.Tpo -c -o locks.o locks.c util.c:710:25: warning: '%s' directive writing up to 65534 bytes into a region of size 182 [-Wformat-overflow=] 710 | sqlp += sprintf(sqlp, " AND host_id IN(%s)", set.host_id_list); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/stdio.h:906, from common.h:93, from util.c:34: In function 'sprintf', inlined from 'read_config_options' at util.c:710:11: /usr/include/arm-linux-gnueabihf/bits/stdio2.h:30:10: note: '__builtin___sprintf_chk' output between 18 and 65552 bytes into a destination of size 198 30 | return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 31 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 32 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ mv -f .deps/snmp.Tpo .deps/snmp.Po arm-linux-gnueabihf-gcc -DHAVE_CONFIG_H -I. -I./config -Wdate-time -D_FORTIFY_SOURCE=2 -I/usr/include/net-snmp -I/usr/include/net-snmp/.. -I/usr/include/mysql -g -O2 -ffile-prefix-map=/build/reproducible-path/cacti-spine-1.2.25=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -MT poller.o -MD -MP -MF .deps/poller.Tpo -c -o poller.o poller.c mv -f .deps/locks.Tpo .deps/locks.Po arm-linux-gnueabihf-gcc -DHAVE_CONFIG_H -I. -I./config -Wdate-time -D_FORTIFY_SOURCE=2 -I/usr/include/net-snmp -I/usr/include/net-snmp/.. -I/usr/include/mysql -g -O2 -ffile-prefix-map=/build/reproducible-path/cacti-spine-1.2.25=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -MT nft_popen.o -MD -MP -MF .deps/nft_popen.Tpo -c -o nft_popen.o nft_popen.c poller.c: In function 'poll_host': poller.c:932:99: warning: zero-length gnu_printf format string [-Wformat-zero-length] 932 | snprintf(sysUptime, BUFSIZE, ""); | ^~ mv -f .deps/util.Tpo .deps/util.Po arm-linux-gnueabihf-gcc -DHAVE_CONFIG_H -I. -I./config -Wdate-time -D_FORTIFY_SOURCE=2 -I/usr/include/net-snmp -I/usr/include/net-snmp/.. -I/usr/include/mysql -g -O2 -ffile-prefix-map=/build/reproducible-path/cacti-spine-1.2.25=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -MT php.o -MD -MP -MF .deps/php.Tpo -c -o php.o php.c mv -f .deps/nft_popen.Tpo .deps/nft_popen.Po arm-linux-gnueabihf-gcc -DHAVE_CONFIG_H -I. -I./config -Wdate-time -D_FORTIFY_SOURCE=2 -I/usr/include/net-snmp -I/usr/include/net-snmp/.. -I/usr/include/mysql -g -O2 -ffile-prefix-map=/build/reproducible-path/cacti-spine-1.2.25=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -MT ping.o -MD -MP -MF .deps/ping.Tpo -c -o ping.o ping.c php.c: In function 'php_init': php.c:369:69: warning: '%d' directive output may be truncated writing between 1 and 11 bytes into a region of size 7 [-Wformat-truncation=] 369 | snprintf(poller_id, TINY_BUFSIZE, "--poller=%d", set.poller_id); | ^~ php.c:369:59: note: directive argument in the range [-2147483648, 1] 369 | snprintf(poller_id, TINY_BUFSIZE, "--poller=%d", set.poller_id); | ^~~~~~~~~~~~~ In file included from /usr/include/stdio.h:906, from common.h:93, from php.c:34: In function 'snprintf', inlined from 'php_init' at php.c:369:4: /usr/include/arm-linux-gnueabihf/bits/stdio2.h:54:10: note: '__builtin___snprintf_chk' output between 11 and 21 bytes into a destination of size 16 54 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 55 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 56 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ php.c: In function 'php_init': php.c:353:69: warning: '%d' directive output may be truncated writing between 1 and 10 bytes into a region of size 7 [-Wformat-truncation=] 353 | snprintf(poller_id, TINY_BUFSIZE, "--poller=%d", set.poller_id); | ^~ php.c:353:59: note: directive argument in the range [2, 2147483647] 353 | snprintf(poller_id, TINY_BUFSIZE, "--poller=%d", set.poller_id); | ^~~~~~~~~~~~~ In function 'snprintf', inlined from 'php_init' at php.c:353:4: /usr/include/arm-linux-gnueabihf/bits/stdio2.h:54:10: note: '__builtin___snprintf_chk' output between 11 and 20 bytes into a destination of size 16 54 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 55 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 56 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ In file included from ping.c:35: ping.c: In function 'get_namebyhost': ping.c:1020:50: warning: format '%li' expects argument of type 'long int', but argument 3 has type 'size_t' {aka 'unsigned int'} [-Wformat=] 1020 | SPINE_LOG_DEBUG(("get_hostbyname(%s) - No matching method for %li chars: %s", hostname, strlen(token), token)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~ | | | size_t {aka unsigned int} spine.h:128:103: note: in definition of macro 'SPINE_LOG_DEBUG' 128 | #define SPINE_LOG_DEBUG(format_and_args) (void)(set.log_level >= POLLER_VERBOSITY_DEBUG && spine_log format_and_args) | ^~~~~~~~~~~~~~~ ping.c:1020:97: note: format string is defined here 1020 | SPINE_LOG_DEBUG(("get_hostbyname(%s) - No matching method for %li chars: %s", hostname, strlen(token), token)); | ~~^ | | | long int | %i mv -f .deps/php.Tpo .deps/php.Po arm-linux-gnueabihf-gcc -DHAVE_CONFIG_H -I. -I./config -Wdate-time -D_FORTIFY_SOURCE=2 -I/usr/include/net-snmp -I/usr/include/net-snmp/.. -I/usr/include/mysql -g -O2 -ffile-prefix-map=/build/reproducible-path/cacti-spine-1.2.25=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -MT keywords.o -MD -MP -MF .deps/keywords.Tpo -c -o keywords.o keywords.c mv -f .deps/keywords.Tpo .deps/keywords.Po arm-linux-gnueabihf-gcc -DHAVE_CONFIG_H -I. -I./config -Wdate-time -D_FORTIFY_SOURCE=2 -I/usr/include/net-snmp -I/usr/include/net-snmp/.. -I/usr/include/mysql -g -O2 -ffile-prefix-map=/build/reproducible-path/cacti-spine-1.2.25=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -MT error.o -MD -MP -MF .deps/error.Tpo -c -o error.o error.c error.c: In function 'spine_signal_handler': error.c:82:67: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'size_t' {aka 'unsigned int'} [-Wformat=] 82 | fprintf(stderr, "Generating backtrace...%ld line(s)...\n", set.exit_size); | ~~^ ~~~~~~~~~~~~~ | | | | long int size_t {aka unsigned int} | %d mv -f .deps/error.Tpo .deps/error.Po mv -f .deps/ping.Tpo .deps/ping.Po mv -f .deps/poller.Tpo .deps/poller.Po /bin/bash ./libtool --tag=CC --mode=link arm-linux-gnueabihf-gcc -I/usr/include/net-snmp -I/usr/include/net-snmp/.. -I/usr/include/mysql -g -O2 -ffile-prefix-map=/build/reproducible-path/cacti-spine-1.2.25=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -lpthread -lssl -lm -o spine sql.o spine.o util.o snmp.o locks.o poller.o nft_popen.o php.o ping.o keywords.o error.o -lnetsnmp -lmysqlclient -lm -ldl -lmysqlclient -lm -ldl -lcap -lcrypto -lz -lpthread -ldl -lm -lpthread -lssl libtool: link: arm-linux-gnueabihf-gcc -I/usr/include/net-snmp -I/usr/include/net-snmp/.. -I/usr/include/mysql -g -O2 -ffile-prefix-map=/build/reproducible-path/cacti-spine-1.2.25=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -Wl,-z -Wl,relro -Wl,-z -Wl,now -o spine sql.o spine.o util.o snmp.o locks.o poller.o nft_popen.o php.o ping.o keywords.o error.o -lnetsnmp -lmysqlclient -lcap -lcrypto -lz -ldl -lm -lpthread -lssl /usr/bin/help2man --output=spine.1 --name='Data Collector for Cacti' --no-info --version-option='--version' ./spine make[1]: Leaving directory '/build/reproducible-path/cacti-spine-1.2.25' dh_auto_test make -j3 check "TESTSUITEFLAGS=-j3 --verbose" VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/cacti-spine-1.2.25' make[1]: Leaving directory '/build/reproducible-path/cacti-spine-1.2.25' create-stamp debian/debhelper-build-stamp dh_prep dh_installdirs debian/rules override_dh_auto_install make[1]: Entering directory '/build/reproducible-path/cacti-spine-1.2.25' dh_auto_install --destdir=debian/tmp make -j1 install DESTDIR=/build/reproducible-path/cacti-spine-1.2.25/debian/tmp AM_UPDATE_INFO_DIR=no make[2]: Entering directory '/build/reproducible-path/cacti-spine-1.2.25' make[3]: Entering directory '/build/reproducible-path/cacti-spine-1.2.25' /usr/bin/mkdir -p '/build/reproducible-path/cacti-spine-1.2.25/debian/tmp/usr/sbin' /bin/bash ./libtool --mode=install /usr/bin/install -c spine '/build/reproducible-path/cacti-spine-1.2.25/debian/tmp/usr/sbin' libtool: install: /usr/bin/install -c spine /build/reproducible-path/cacti-spine-1.2.25/debian/tmp/usr/sbin/spine /usr/bin/mkdir -p '/build/reproducible-path/cacti-spine-1.2.25/debian/tmp/usr/etc' /usr/bin/install -c -m 644 spine.conf.dist '/build/reproducible-path/cacti-spine-1.2.25/debian/tmp/usr/etc' /usr/bin/mkdir -p '/build/reproducible-path/cacti-spine-1.2.25/debian/tmp/usr/share/man/man1' /usr/bin/install -c -m 644 spine.1 '/build/reproducible-path/cacti-spine-1.2.25/debian/tmp/usr/share/man/man1' make[3]: Leaving directory '/build/reproducible-path/cacti-spine-1.2.25' make[2]: Leaving directory '/build/reproducible-path/cacti-spine-1.2.25' make[1]: Leaving directory '/build/reproducible-path/cacti-spine-1.2.25' dh_install dh_installdocs dh_installchangelogs dh_installman dh_installdebconf dh_lintian dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'cacti-spine-dbgsym' in '../cacti-spine-dbgsym_1.2.25-1_armhf.deb'. dpkg-deb: building package 'cacti-spine' in '../cacti-spine_1.2.25-1_armhf.deb'. dpkg-genbuildinfo --build=binary -O../cacti-spine_1.2.25-1_armhf.buildinfo dpkg-genchanges --build=binary -O../cacti-spine_1.2.25-1_armhf.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-source: info: using options from cacti-spine-1.2.25/debian/source/options: --extend-diff-ignore=(^|/)(config\.guess|config\.sub|aclocal\.m4|configure|ltmain\.sh|Makefile\.in)$ dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: including full source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/11812 and its subdirectories I: Current time: Wed Mar 27 16:28:26 -12 2024 I: pbuilder-time-stamp: 1711600106 Thu Mar 28 04:28:33 UTC 2024 I: 1st build successful. Starting 2nd build on remote node virt32z-armhf-rb.debian.net. Thu Mar 28 04:28:33 UTC 2024 I: Preparing to do remote build '2' on virt32z-armhf-rb.debian.net. Thu Mar 28 04:30:02 UTC 2024 I: Deleting $TMPDIR on virt32z-armhf-rb.debian.net. Thu Mar 28 04:30:04 UTC 2024 I: cacti-spine_1.2.25-1_armhf.changes: Format: 1.8 Date: Thu, 21 Sep 2023 13:04:44 +0200 Source: cacti-spine Binary: cacti-spine cacti-spine-dbgsym Architecture: armhf Version: 1.2.25-1 Distribution: unstable Urgency: medium Maintainer: Cacti Maintainer Changed-By: Paul Gevers Description: cacti-spine - Multi-Threading poller for cacti Changes: cacti-spine (1.2.25-1) unstable; urgency=medium . * New upstream version 1.2.25 * Update Vcs to point at Debian namespace to invite others Checksums-Sha1: f6d65bd058ae4038874d3c107c700a87f8b0cee5 150836 cacti-spine-dbgsym_1.2.25-1_armhf.deb e21ae9f5b0892c5a14fc20d29d71264a25e93cdb 6139 cacti-spine_1.2.25-1_armhf.buildinfo ac135f1fe9b0a616a6232361c01f09ba554cbae2 68324 cacti-spine_1.2.25-1_armhf.deb Checksums-Sha256: 9e26052b857c4922b7b28f6d0f3c9d79e78d8133cc0ddfb3f23dabb85ffaf1d3 150836 cacti-spine-dbgsym_1.2.25-1_armhf.deb ec5bff32e42b3844859c0db6039ac42a6a0586531773d8874c569f563cc52d18 6139 cacti-spine_1.2.25-1_armhf.buildinfo e1a4d8942ab1b45276d2ab6405a42826e575d3e59bbaccb4cdf7f628eec9f99d 68324 cacti-spine_1.2.25-1_armhf.deb Files: 1349903be015b26c51045812974a822d 150836 debug optional cacti-spine-dbgsym_1.2.25-1_armhf.deb af068efa917da6218b9083f803b90017 6139 web optional cacti-spine_1.2.25-1_armhf.buildinfo 2dbc402f98aca4835d346a22e085dfcc 68324 web optional cacti-spine_1.2.25-1_armhf.deb Thu Mar 28 04:30:06 UTC 2024 I: diffoscope 261 will be used to compare the two builds: Running as unit: rb-diffoscope-armhf_6-1806.service # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.Jqk96U2E/cacti-spine_1.2.25-1.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.Jqk96U2E/cacti-spine_1.2.25-1.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.Jqk96U2E/cacti-spine_1.2.25-1.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.Jqk96U2E/b1/cacti-spine_1.2.25-1_armhf.changes /srv/reproducible-results/rbuild-debian/r-b-build.Jqk96U2E/b2/cacti-spine_1.2.25-1_armhf.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.332s) 0.332s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.017s) 0.017s 12 calls diffoscope.comparators.binary.FilesystemFile ## specialize (total time: 0.000s) 0.000s 1 call specialize Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 639ms CPU time consumed: 635ms Thu Mar 28 04:30:07 UTC 2024 I: diffoscope 261 found no differences in the changes files, and a .buildinfo file also exists. Thu Mar 28 04:30:07 UTC 2024 I: cacti-spine from trixie built successfully and reproducibly on armhf. Thu Mar 28 04:30:08 UTC 2024 I: Submitting .buildinfo files to external archives: Thu Mar 28 04:30:08 UTC 2024 I: Submitting 8.0K b1/cacti-spine_1.2.25-1_armhf.buildinfo.asc Thu Mar 28 04:30:10 UTC 2024 I: Submitting 8.0K b2/cacti-spine_1.2.25-1_armhf.buildinfo.asc Thu Mar 28 04:30:11 UTC 2024 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Thu Mar 28 04:30:11 UTC 2024 I: Done submitting .buildinfo files. Thu Mar 28 04:30:11 UTC 2024 I: Removing signed cacti-spine_1.2.25-1_armhf.buildinfo.asc files: removed './b1/cacti-spine_1.2.25-1_armhf.buildinfo.asc' removed './b2/cacti-spine_1.2.25-1_armhf.buildinfo.asc'