Fri May 10 14:40:34 UTC 2024 I: starting to build astrodendro/trixie/armhf on jenkins on '2024-05-10 14:40' Fri May 10 14:40:34 UTC 2024 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/armhf_16/5544/console.log Fri May 10 14:40:34 UTC 2024 I: Downloading source for trixie/astrodendro=0.2.0+dfsg1-4 --2024-05-10 14:40:34-- http://deb.debian.org/debian/pool/main/a/astrodendro/astrodendro_0.2.0%2bdfsg1-4.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2181 (2.1K) [text/prs.lines.tag] Saving to: ‘astrodendro_0.2.0+dfsg1-4.dsc’ 0K .. 100% 310M=0s 2024-05-10 14:40:34 (310 MB/s) - ‘astrodendro_0.2.0+dfsg1-4.dsc’ saved [2181/2181] Fri May 10 14:40:34 UTC 2024 I: astrodendro_0.2.0+dfsg1-4.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: astrodendro Binary: python3-astrodendro Architecture: all Version: 0.2.0+dfsg1-4 Maintainer: Debian Astronomy Maintainers Uploaders: Josue Ortega Homepage: http://www.dendrograms.org/ Standards-Version: 4.6.0 Vcs-Browser: https://salsa.debian.org/debian-astro-team/python-astrodendro Vcs-Git: https://salsa.debian.org/debian-astro-team/python-astrodendro.git Testsuite: autopkgtest Build-Depends: debhelper-compat (= 13), dh-python, python3-all, python3-setuptools, python3-numpy (>= 1.4.1), python3-astropy (>= 0.2.0), python3-h5py (>= 0.2.0) Package-List: python3-astrodendro deb python optional arch=all Checksums-Sha1: c35e42d5c994b2469654c8fc37e7ca49474a492e 1163192 astrodendro_0.2.0+dfsg1.orig.tar.gz ac1af5f01c7932806c91a39c99ccfd96aa51a82d 5700 astrodendro_0.2.0+dfsg1-4.debian.tar.xz Checksums-Sha256: 98e7260f0fe70a6088100acba015ba23078dc1c79bcdebfceec95df63359aaea 1163192 astrodendro_0.2.0+dfsg1.orig.tar.gz da03a10f0494fb8713407ff58bc0f19b7661ba9649b31fb89c398aa8fc5ba516 5700 astrodendro_0.2.0+dfsg1-4.debian.tar.xz Files: f9254f96fcd4435e12491d7edef7abe2 1163192 astrodendro_0.2.0+dfsg1.orig.tar.gz 3e881446bf7291950b33c108370a570e 5700 astrodendro_0.2.0+dfsg1-4.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQIzBAEBCgAdFiEEuvxshffLFD/utvsVcRWv0HcQ3PcFAmPGW7IACgkQcRWv0HcQ 3Pd4ZA//ef34QNabt/syQd0NVfuROhMezs6sD5eaDzH6xu//nmkVmBPpf07qOR8A k2jF/1SGfo2+QbQK/o1HAZavmY7OmoocpgkiIcrNKHnZZPor4Y79G5VhdZQona86 UwN8/SiB9XC3FB2k5V7pL8ydHMhmnAXi+8XbTRCjbrk3h9nw4fkq7MX4G0Vcp+5Q P/c+UTNA8BGV1A3ikMCQ1ALkVuPoPvNFu+I3YAIik/R5KowbU/G6pQBNrXSzPW4i 8DSc2EHRLEC+WjkEN/liXH5sdIHabcrP8/XrTtvVu6qzyHEYKKMhheN9CGLokrh2 QnsXUWaQJElWsqyvI391ojdHiXPLJpDTWPu/eKBG4F3uqZNjVwgOYpW78zYIlFiG 2itkm86COW0VTfb2UF5cyghU3G3sZQTAfpYdMNkeAQJROV5/9hiDXaBHQb1qF1JL u6XjLoipf5jDO4csisDmpaa0wnLquY1h8vnIVCEc0y5eRU7xzq/WQAhDQ/1KpSEb L4GlECICeHk7X+Vy2nL1AumiQJXB7nMBuFj3vhVXCT4v+eVhGhIsDbvGNuWLjPlU ilsKlIOnoqybddsBd/SVsZ37Po/BZUQ1a14EkC4RsWLcMxZZXcHKbyVBLMi2oStS yTs1Tuo0rgs0ubhmr5+xb7+7eXt782KfDM9QiqAwNHHegTTFEnE= =eajc -----END PGP SIGNATURE----- Fri May 10 14:40:34 UTC 2024 I: Checking whether the package is not for us Fri May 10 14:40:34 UTC 2024 I: Starting 1st build on remote node virt32b-armhf-rb.debian.net. Fri May 10 14:40:34 UTC 2024 I: Preparing to do remote build '1' on virt32b-armhf-rb.debian.net. Fri May 10 14:45:23 UTC 2024 I: Deleting $TMPDIR on virt32b-armhf-rb.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Fri May 10 02:40:41 -12 2024 I: pbuilder-time-stamp: 1715352041 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [astrodendro_0.2.0+dfsg1-4.dsc] I: copying [./astrodendro_0.2.0+dfsg1.orig.tar.gz] I: copying [./astrodendro_0.2.0+dfsg1-4.debian.tar.xz] I: Extracting source gpgv: Signature made Tue Jan 17 08:26:26 2023 gpgv: using RSA key BAFC6C85F7CB143FEEB6FB157115AFD07710DCF7 gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./astrodendro_0.2.0+dfsg1-4.dsc: no acceptable signature found dpkg-source: info: extracting astrodendro in astrodendro-0.2.0+dfsg1 dpkg-source: info: unpacking astrodendro_0.2.0+dfsg1.orig.tar.gz dpkg-source: info: unpacking astrodendro_0.2.0+dfsg1-4.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying 000-removes-install-requires.patch dpkg-source: info: applying 001-python3.10-support.patch dpkg-source: info: applying 002-Fix-compability-to-numpy-1.24.patch I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/13316/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='armhf' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=3 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='armhf' IFS=' ' INVOCATION_ID='e1158588b6824eb280d9f69d6f464468' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='13316' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.TCAqOXgM/pbuilderrc_Ars6 --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.TCAqOXgM/b1 --logfile b1/build.log astrodendro_0.2.0+dfsg1-4.dsc' SUDO_GID='112' SUDO_UID='106' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://10.0.0.15:3142/' I: uname -a Linux virt32b 6.1.0-21-armmp-lpae #1 SMP Debian 6.1.90-1 (2024-05-03) armv7l GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 May 8 11:25 /bin -> usr/bin I: user script /srv/workspace/pbuilder/13316/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: armhf Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), dh-python, python3-all, python3-setuptools, python3-numpy (>= 1.4.1), python3-astropy (>= 0.2.0), python3-h5py (>= 0.2.0) dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19445 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on dh-python; however: Package dh-python is not installed. pbuilder-satisfydepends-dummy depends on python3-all; however: Package python3-all is not installed. pbuilder-satisfydepends-dummy depends on python3-setuptools; however: Package python3-setuptools is not installed. pbuilder-satisfydepends-dummy depends on python3-numpy (>= 1.4.1); however: Package python3-numpy is not installed. pbuilder-satisfydepends-dummy depends on python3-astropy (>= 0.2.0); however: Package python3-astropy is not installed. pbuilder-satisfydepends-dummy depends on python3-h5py (>= 0.2.0); however: Package python3-h5py is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-python{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libaec0{a} libarchive-zip-perl{a} libblas3{a} libbrotli1{a} libcom-err2{a} libcurl4t64{a} libdebhelper-perl{a} libelf1t64{a} liberfa1{a} libexpat1{a} libfile-stripnondeterminism-perl{a} libgfortran5{a} libgssapi-krb5-2{a} libhdf5-103-1t64{a} libhdf5-hl-100t64{a} libicu72{a} libjs-jquery{a} libjs-jquery-hotkeys{a} libjs-jquery-isonscreen{a} libjs-jquery-metadata{a} libjs-jquery-tablesorter{a} libjs-jquery-throttle-debounce{a} libjs-sphinxdoc{a} libjs-underscore{a} libk5crypto3{a} libkeyutils1{a} libkrb5-3{a} libkrb5support0{a} liblapack3{a} liblzf1{a} libmagic-mgc{a} libmagic1t64{a} libnghttp2-14{a} libpipeline1{a} libpsl5t64{a} libpython3-stdlib{a} libpython3.11-minimal{a} libpython3.11-stdlib{a} libpython3.12-minimal{a} libpython3.12-stdlib{a} libreadline8t64{a} librtmp1{a} libssh2-1t64{a} libsub-override-perl{a} libsz2{a} libtool{a} libuchardet0{a} libwcs8{a} libxml2{a} libyaml-0-2{a} m4{a} man-db{a} media-types{a} netbase{a} po-debconf{a} python3{a} python3-all{a} python3-astropy{a} python3-astropy-iers-data{a} python3-attr{a} python3-configobj{a} python3-coverage{a} python3-dateutil{a} python3-distutils{a} python3-erfa{a} python3-h5py{a} python3-h5py-serial{a} python3-hypothesis{a} python3-iniconfig{a} python3-lib2to3{a} python3-minimal{a} python3-numpy{a} python3-packaging{a} python3-pkg-resources{a} python3-pluggy{a} python3-ply{a} python3-pytest{a} python3-pytest-arraydiff{a} python3-pytest-astropy{a} python3-pytest-astropy-header{a} python3-pytest-cov{a} python3-pytest-doctestplus{a} python3-pytest-filter-subpackage{a} python3-pytest-mock{a} python3-pytest-remotedata{a} python3-setuptools{a} python3-six{a} python3-sortedcontainers{a} python3-yaml{a} python3.11{a} python3.11-minimal{a} python3.12{a} python3.12-minimal{a} readline-common{a} sensible-utils{a} tzdata{a} The following packages are RECOMMENDED but will NOT be installed: ca-certificates curl javascript-common krb5-locales libarchive-cpio-perl libjs-jquery-datatables libltdl-dev libmail-sendmail-perl lynx publicsuffix python3-click python3-pygments python3-scipy wget 0 packages upgraded, 111 newly installed, 0 to remove and 0 not upgraded. Need to get 48.1 MB of archives. After unpacking 199 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main armhf libjs-jquery all 3.6.1+dfsg+~3.5.14-1 [326 kB] Get: 2 http://deb.debian.org/debian trixie/main armhf libjs-jquery-hotkeys all 0~20130707+git2d51e3a9+dfsg-2.1 [11.5 kB] Get: 3 http://deb.debian.org/debian trixie/main armhf libpython3.11-minimal armhf 3.11.9-1 [805 kB] Get: 4 http://deb.debian.org/debian trixie/main armhf libexpat1 armhf 2.6.2-1 [83.5 kB] Get: 5 http://deb.debian.org/debian trixie/main armhf python3.11-minimal armhf 3.11.9-1 [1600 kB] Get: 6 http://deb.debian.org/debian trixie/main armhf python3-minimal armhf 3.11.8-1 [26.3 kB] Get: 7 http://deb.debian.org/debian trixie/main armhf media-types all 10.1.0 [26.9 kB] Get: 8 http://deb.debian.org/debian trixie/main armhf netbase all 6.4 [12.8 kB] Get: 9 http://deb.debian.org/debian trixie/main armhf tzdata all 2024a-4 [255 kB] Get: 10 http://deb.debian.org/debian trixie/main armhf readline-common all 8.2-4 [69.3 kB] Get: 11 http://deb.debian.org/debian trixie/main armhf libreadline8t64 armhf 8.2-4 [145 kB] Get: 12 http://deb.debian.org/debian trixie/main armhf libpython3.11-stdlib armhf 3.11.9-1 [1704 kB] Get: 13 http://deb.debian.org/debian trixie/main armhf python3.11 armhf 3.11.9-1 [602 kB] Get: 14 http://deb.debian.org/debian trixie/main armhf libpython3-stdlib armhf 3.11.8-1 [9332 B] Get: 15 http://deb.debian.org/debian trixie/main armhf python3 armhf 3.11.8-1 [27.4 kB] Get: 16 http://deb.debian.org/debian trixie/main armhf libpython3.12-minimal armhf 3.12.3-1 [795 kB] Get: 17 http://deb.debian.org/debian trixie/main armhf python3.12-minimal armhf 3.12.3-1 [1783 kB] Get: 18 http://deb.debian.org/debian trixie/main armhf sensible-utils all 0.0.22 [22.4 kB] Get: 19 http://deb.debian.org/debian trixie/main armhf libmagic-mgc armhf 1:5.45-3 [314 kB] Get: 20 http://deb.debian.org/debian trixie/main armhf libmagic1t64 armhf 1:5.45-3 [98.1 kB] Get: 21 http://deb.debian.org/debian trixie/main armhf file armhf 1:5.45-3 [42.0 kB] Get: 22 http://deb.debian.org/debian trixie/main armhf gettext-base armhf 0.21-14+b1 [157 kB] Get: 23 http://deb.debian.org/debian trixie/main armhf libuchardet0 armhf 0.0.8-1+b1 [65.7 kB] Get: 24 http://deb.debian.org/debian trixie/main armhf groff-base armhf 1.23.0-4 [1090 kB] Get: 25 http://deb.debian.org/debian trixie/main armhf bsdextrautils armhf 2.40-8 [85.6 kB] Get: 26 http://deb.debian.org/debian trixie/main armhf libpipeline1 armhf 1.5.7-2 [33.3 kB] Get: 27 http://deb.debian.org/debian trixie/main armhf man-db armhf 2.12.1-1 [1375 kB] Get: 28 http://deb.debian.org/debian trixie/main armhf m4 armhf 1.4.19-4 [264 kB] Get: 29 http://deb.debian.org/debian trixie/main armhf autoconf all 2.71-3 [332 kB] Get: 30 http://deb.debian.org/debian trixie/main armhf autotools-dev all 20220109.1 [51.6 kB] Get: 31 http://deb.debian.org/debian trixie/main armhf automake all 1:1.16.5-1.3 [823 kB] Get: 32 http://deb.debian.org/debian trixie/main armhf autopoint all 0.21-14 [496 kB] Get: 33 http://deb.debian.org/debian trixie/main armhf libdebhelper-perl all 13.15.3 [88.0 kB] Get: 34 http://deb.debian.org/debian trixie/main armhf libtool all 2.4.7-7 [517 kB] Get: 35 http://deb.debian.org/debian trixie/main armhf dh-autoreconf all 20 [17.1 kB] Get: 36 http://deb.debian.org/debian trixie/main armhf libarchive-zip-perl all 1.68-1 [104 kB] Get: 37 http://deb.debian.org/debian trixie/main armhf libsub-override-perl all 0.10-1 [10.6 kB] Get: 38 http://deb.debian.org/debian trixie/main armhf libfile-stripnondeterminism-perl all 1.13.1-1 [19.4 kB] Get: 39 http://deb.debian.org/debian trixie/main armhf dh-strip-nondeterminism all 1.13.1-1 [8620 B] Get: 40 http://deb.debian.org/debian trixie/main armhf libelf1t64 armhf 0.191-1+b1 [183 kB] Get: 41 http://deb.debian.org/debian trixie/main armhf dwz armhf 0.15-1+b2 [106 kB] Get: 42 http://deb.debian.org/debian trixie/main armhf libicu72 armhf 72.1-4+b1 [9070 kB] Get: 43 http://deb.debian.org/debian trixie/main armhf libxml2 armhf 2.9.14+dfsg-1.3+b3 [598 kB] Get: 44 http://deb.debian.org/debian trixie/main armhf gettext armhf 0.21-14+b1 [1230 kB] Get: 45 http://deb.debian.org/debian trixie/main armhf intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 46 http://deb.debian.org/debian trixie/main armhf po-debconf all 1.0.21+nmu1 [248 kB] Get: 47 http://deb.debian.org/debian trixie/main armhf debhelper all 13.15.3 [901 kB] Get: 48 http://deb.debian.org/debian trixie/main armhf python3-pkg-resources all 68.1.2-2 [241 kB] Get: 49 http://deb.debian.org/debian trixie/main armhf python3-lib2to3 all 3.12.3-1 [77.6 kB] Get: 50 http://deb.debian.org/debian trixie/main armhf python3-distutils all 3.12.3-1 [131 kB] Get: 51 http://deb.debian.org/debian trixie/main armhf python3-setuptools all 68.1.2-2 [468 kB] Get: 52 http://deb.debian.org/debian trixie/main armhf dh-python all 6.20240422 [107 kB] Get: 53 http://deb.debian.org/debian trixie/main armhf libaec0 armhf 1.1.3-1 [21.5 kB] Get: 54 http://deb.debian.org/debian trixie/main armhf libblas3 armhf 3.12.0-3 [108 kB] Get: 55 http://deb.debian.org/debian trixie/main armhf libbrotli1 armhf 1.1.0-2+b3 [284 kB] Get: 56 http://deb.debian.org/debian trixie/main armhf libcom-err2 armhf 1.47.1~rc2-1 [21.8 kB] Get: 57 http://deb.debian.org/debian trixie/main armhf libkrb5support0 armhf 1.20.1-6+b1 [30.6 kB] Get: 58 http://deb.debian.org/debian trixie/main armhf libk5crypto3 armhf 1.20.1-6+b1 [75.5 kB] Get: 59 http://deb.debian.org/debian trixie/main armhf libkeyutils1 armhf 1.6.3-3 [7908 B] Get: 60 http://deb.debian.org/debian trixie/main armhf libkrb5-3 armhf 1.20.1-6+b1 [290 kB] Get: 61 http://deb.debian.org/debian trixie/main armhf libgssapi-krb5-2 armhf 1.20.1-6+b1 [112 kB] Get: 62 http://deb.debian.org/debian trixie/main armhf libnghttp2-14 armhf 1.61.0-1+b1 [64.1 kB] Get: 63 http://deb.debian.org/debian trixie/main armhf libpsl5t64 armhf 0.21.2-1.1 [55.6 kB] Get: 64 http://deb.debian.org/debian trixie/main armhf librtmp1 armhf 2.4+20151223.gitfa8646d.1-2+b4 [53.2 kB] Get: 65 http://deb.debian.org/debian trixie/main armhf libssh2-1t64 armhf 1.11.0-4.1+b2 [198 kB] Get: 66 http://deb.debian.org/debian trixie/main armhf libcurl4t64 armhf 8.7.1-3 [391 kB] Get: 67 http://deb.debian.org/debian trixie/main armhf liberfa1 armhf 2.0.1-1+b1 [119 kB] Get: 68 http://deb.debian.org/debian trixie/main armhf libgfortran5 armhf 14-20240330-1 [264 kB] Get: 69 http://deb.debian.org/debian trixie/main armhf libsz2 armhf 1.1.3-1 [7724 B] Get: 70 http://deb.debian.org/debian trixie/main armhf libhdf5-103-1t64 armhf 1.10.10+repack-3.3 [1190 kB] Get: 71 http://deb.debian.org/debian trixie/main armhf libhdf5-hl-100t64 armhf 1.10.10+repack-3.3 [61.2 kB] Get: 72 http://deb.debian.org/debian trixie/main armhf libjs-jquery-isonscreen all 1.2.0-1.1 [3196 B] Get: 73 http://deb.debian.org/debian trixie/main armhf libjs-jquery-metadata all 12-4 [6532 B] Get: 74 http://deb.debian.org/debian trixie/main armhf libjs-jquery-tablesorter all 1:2.31.3+dfsg1-3 [184 kB] Get: 75 http://deb.debian.org/debian trixie/main armhf libjs-jquery-throttle-debounce all 1.1+dfsg.1-2 [12.2 kB] Get: 76 http://deb.debian.org/debian trixie/main armhf libjs-underscore all 1.13.4~dfsg+~1.11.4-3 [116 kB] Get: 77 http://deb.debian.org/debian trixie/main armhf libjs-sphinxdoc all 7.2.6-6 [150 kB] Get: 78 http://deb.debian.org/debian trixie/main armhf liblapack3 armhf 3.12.0-3 [1803 kB] Get: 79 http://deb.debian.org/debian trixie/main armhf liblzf1 armhf 3.6-4+b1 [9476 B] Get: 80 http://deb.debian.org/debian trixie/main armhf libpython3.12-stdlib armhf 3.12.3-1 [1808 kB] Get: 81 http://deb.debian.org/debian trixie/main armhf libwcs8 armhf 8.2.2+ds-3+b2 [246 kB] Get: 82 http://deb.debian.org/debian trixie/main armhf libyaml-0-2 armhf 0.2.5-1+b1 [45.5 kB] Get: 83 http://deb.debian.org/debian trixie/main armhf python3.12 armhf 3.12.3-1 [659 kB] Get: 84 http://deb.debian.org/debian trixie/main armhf python3-all armhf 3.11.8-1 [1056 B] Get: 85 http://deb.debian.org/debian trixie/main armhf python3-configobj all 5.0.8-3 [33.9 kB] Get: 86 http://deb.debian.org/debian trixie/main armhf python3-iniconfig all 1.1.1-2 [6396 B] Get: 87 http://deb.debian.org/debian trixie/main armhf python3-packaging all 24.0-1 [45.5 kB] Get: 88 http://deb.debian.org/debian trixie/main armhf python3-pluggy all 1.5.0-1 [26.9 kB] Get: 89 http://deb.debian.org/debian trixie/main armhf python3-pytest all 7.4.4-3 [239 kB] Get: 90 http://deb.debian.org/debian trixie/main armhf python3-attr all 23.2.0-2 [65.5 kB] Get: 91 http://deb.debian.org/debian trixie/main armhf python3-six all 1.16.0-6 [16.3 kB] Get: 92 http://deb.debian.org/debian trixie/main armhf python3-dateutil all 2.9.0-2 [79.4 kB] Get: 93 http://deb.debian.org/debian trixie/main armhf python3-sortedcontainers all 2.4.0-2 [31.9 kB] Get: 94 http://deb.debian.org/debian trixie/main armhf python3-hypothesis all 6.100.4-1 [314 kB] Get: 95 http://deb.debian.org/debian trixie/main armhf python3-numpy armhf 1:1.26.4+ds-8 [4132 kB] Get: 96 http://deb.debian.org/debian trixie/main armhf python3-pytest-arraydiff all 0.6.1-3 [10.5 kB] Get: 97 http://deb.debian.org/debian trixie/main armhf python3-pytest-astropy-header all 0.2.2-1 [8676 B] Get: 98 http://deb.debian.org/debian trixie/main armhf python3-coverage armhf 7.2.7+dfsg1-1+b1 [168 kB] Get: 99 http://deb.debian.org/debian trixie/main armhf python3-pytest-cov all 5.0.0-1 [26.8 kB] Get: 100 http://deb.debian.org/debian trixie/main armhf python3-pytest-doctestplus all 1.2.1-1 [25.1 kB] Get: 101 http://deb.debian.org/debian trixie/main armhf python3-pytest-filter-subpackage all 0.2.0-1 [6312 B] Get: 102 http://deb.debian.org/debian trixie/main armhf python3-pytest-mock all 3.12.0-1.1 [17.6 kB] Get: 103 http://deb.debian.org/debian trixie/main armhf python3-pytest-remotedata all 0.4.1-1 [9292 B] Get: 104 http://deb.debian.org/debian trixie/main armhf python3-pytest-astropy all 0.11.0-1 [6716 B] Get: 105 http://deb.debian.org/debian trixie/main armhf python3-ply all 3.11-6 [63.7 kB] Get: 106 http://deb.debian.org/debian trixie/main armhf python3-astropy-iers-data all 0.2024.04.08.00.32.04-1 [1076 kB] Get: 107 http://deb.debian.org/debian trixie/main armhf python3-erfa armhf 2.0.1.4+ds-1 [303 kB] Get: 108 http://deb.debian.org/debian trixie/main armhf python3-yaml armhf 6.0.1-2 [162 kB] Get: 109 http://deb.debian.org/debian trixie/main armhf python3-astropy armhf 6.0.1-4 [3858 kB] Get: 110 http://deb.debian.org/debian trixie/main armhf python3-h5py-serial armhf 3.10.0-1+b3 [1261 kB] Get: 111 http://deb.debian.org/debian trixie/main armhf python3-h5py all 3.10.0-1 [14.4 kB] Fetched 48.1 MB in 2s (26.2 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package libjs-jquery. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19445 files and directories currently installed.) Preparing to unpack .../libjs-jquery_3.6.1+dfsg+~3.5.14-1_all.deb ... Unpacking libjs-jquery (3.6.1+dfsg+~3.5.14-1) ... Selecting previously unselected package libjs-jquery-hotkeys. Preparing to unpack .../libjs-jquery-hotkeys_0~20130707+git2d51e3a9+dfsg-2.1_all.deb ... Unpacking libjs-jquery-hotkeys (0~20130707+git2d51e3a9+dfsg-2.1) ... Selecting previously unselected package libpython3.11-minimal:armhf. Preparing to unpack .../libpython3.11-minimal_3.11.9-1_armhf.deb ... Unpacking libpython3.11-minimal:armhf (3.11.9-1) ... Selecting previously unselected package libexpat1:armhf. Preparing to unpack .../libexpat1_2.6.2-1_armhf.deb ... Unpacking libexpat1:armhf (2.6.2-1) ... Selecting previously unselected package python3.11-minimal. Preparing to unpack .../python3.11-minimal_3.11.9-1_armhf.deb ... Unpacking python3.11-minimal (3.11.9-1) ... Setting up libpython3.11-minimal:armhf (3.11.9-1) ... Setting up libexpat1:armhf (2.6.2-1) ... Setting up python3.11-minimal (3.11.9-1) ... Selecting previously unselected package python3-minimal. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19787 files and directories currently installed.) Preparing to unpack .../0-python3-minimal_3.11.8-1_armhf.deb ... Unpacking python3-minimal (3.11.8-1) ... Selecting previously unselected package media-types. Preparing to unpack .../1-media-types_10.1.0_all.deb ... Unpacking media-types (10.1.0) ... Selecting previously unselected package netbase. Preparing to unpack .../2-netbase_6.4_all.deb ... Unpacking netbase (6.4) ... Selecting previously unselected package tzdata. Preparing to unpack .../3-tzdata_2024a-4_all.deb ... Unpacking tzdata (2024a-4) ... Selecting previously unselected package readline-common. Preparing to unpack .../4-readline-common_8.2-4_all.deb ... Unpacking readline-common (8.2-4) ... Selecting previously unselected package libreadline8t64:armhf. Preparing to unpack .../5-libreadline8t64_8.2-4_armhf.deb ... Adding 'diversion of /lib/arm-linux-gnueabihf/libhistory.so.8 to /lib/arm-linux-gnueabihf/libhistory.so.8.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/arm-linux-gnueabihf/libhistory.so.8.2 to /lib/arm-linux-gnueabihf/libhistory.so.8.2.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/arm-linux-gnueabihf/libreadline.so.8 to /lib/arm-linux-gnueabihf/libreadline.so.8.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/arm-linux-gnueabihf/libreadline.so.8.2 to /lib/arm-linux-gnueabihf/libreadline.so.8.2.usr-is-merged by libreadline8t64' Unpacking libreadline8t64:armhf (8.2-4) ... Selecting previously unselected package libpython3.11-stdlib:armhf. Preparing to unpack .../6-libpython3.11-stdlib_3.11.9-1_armhf.deb ... Unpacking libpython3.11-stdlib:armhf (3.11.9-1) ... Selecting previously unselected package python3.11. Preparing to unpack .../7-python3.11_3.11.9-1_armhf.deb ... Unpacking python3.11 (3.11.9-1) ... Selecting previously unselected package libpython3-stdlib:armhf. Preparing to unpack .../8-libpython3-stdlib_3.11.8-1_armhf.deb ... Unpacking libpython3-stdlib:armhf (3.11.8-1) ... Setting up python3-minimal (3.11.8-1) ... Selecting previously unselected package python3. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20779 files and directories currently installed.) Preparing to unpack .../00-python3_3.11.8-1_armhf.deb ... Unpacking python3 (3.11.8-1) ... Selecting previously unselected package libpython3.12-minimal:armhf. Preparing to unpack .../01-libpython3.12-minimal_3.12.3-1_armhf.deb ... Unpacking libpython3.12-minimal:armhf (3.12.3-1) ... Selecting previously unselected package python3.12-minimal. Preparing to unpack .../02-python3.12-minimal_3.12.3-1_armhf.deb ... Unpacking python3.12-minimal (3.12.3-1) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../03-sensible-utils_0.0.22_all.deb ... Unpacking sensible-utils (0.0.22) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../04-libmagic-mgc_1%3a5.45-3_armhf.deb ... Unpacking libmagic-mgc (1:5.45-3) ... Selecting previously unselected package libmagic1t64:armhf. Preparing to unpack .../05-libmagic1t64_1%3a5.45-3_armhf.deb ... Unpacking libmagic1t64:armhf (1:5.45-3) ... Selecting previously unselected package file. Preparing to unpack .../06-file_1%3a5.45-3_armhf.deb ... Unpacking file (1:5.45-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../07-gettext-base_0.21-14+b1_armhf.deb ... Unpacking gettext-base (0.21-14+b1) ... Selecting previously unselected package libuchardet0:armhf. Preparing to unpack .../08-libuchardet0_0.0.8-1+b1_armhf.deb ... Unpacking libuchardet0:armhf (0.0.8-1+b1) ... Selecting previously unselected package groff-base. Preparing to unpack .../09-groff-base_1.23.0-4_armhf.deb ... Unpacking groff-base (1.23.0-4) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../10-bsdextrautils_2.40-8_armhf.deb ... Unpacking bsdextrautils (2.40-8) ... Selecting previously unselected package libpipeline1:armhf. Preparing to unpack .../11-libpipeline1_1.5.7-2_armhf.deb ... Unpacking libpipeline1:armhf (1.5.7-2) ... Selecting previously unselected package man-db. Preparing to unpack .../12-man-db_2.12.1-1_armhf.deb ... Unpacking man-db (2.12.1-1) ... Selecting previously unselected package m4. Preparing to unpack .../13-m4_1.4.19-4_armhf.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../14-autoconf_2.71-3_all.deb ... Unpacking autoconf (2.71-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../15-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../16-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../17-autopoint_0.21-14_all.deb ... Unpacking autopoint (0.21-14) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../18-libdebhelper-perl_13.15.3_all.deb ... Unpacking libdebhelper-perl (13.15.3) ... Selecting previously unselected package libtool. Preparing to unpack .../19-libtool_2.4.7-7_all.deb ... Unpacking libtool (2.4.7-7) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../20-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../21-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libsub-override-perl. Preparing to unpack .../22-libsub-override-perl_0.10-1_all.deb ... Unpacking libsub-override-perl (0.10-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../23-libfile-stripnondeterminism-perl_1.13.1-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.13.1-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../24-dh-strip-nondeterminism_1.13.1-1_all.deb ... Unpacking dh-strip-nondeterminism (1.13.1-1) ... Selecting previously unselected package libelf1t64:armhf. Preparing to unpack .../25-libelf1t64_0.191-1+b1_armhf.deb ... Unpacking libelf1t64:armhf (0.191-1+b1) ... Selecting previously unselected package dwz. Preparing to unpack .../26-dwz_0.15-1+b2_armhf.deb ... Unpacking dwz (0.15-1+b2) ... Selecting previously unselected package libicu72:armhf. Preparing to unpack .../27-libicu72_72.1-4+b1_armhf.deb ... Unpacking libicu72:armhf (72.1-4+b1) ... Selecting previously unselected package libxml2:armhf. Preparing to unpack .../28-libxml2_2.9.14+dfsg-1.3+b3_armhf.deb ... Unpacking libxml2:armhf (2.9.14+dfsg-1.3+b3) ... Selecting previously unselected package gettext. Preparing to unpack .../29-gettext_0.21-14+b1_armhf.deb ... Unpacking gettext (0.21-14+b1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../30-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../31-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../32-debhelper_13.15.3_all.deb ... Unpacking debhelper (13.15.3) ... Selecting previously unselected package python3-pkg-resources. Preparing to unpack .../33-python3-pkg-resources_68.1.2-2_all.deb ... Unpacking python3-pkg-resources (68.1.2-2) ... Selecting previously unselected package python3-lib2to3. Preparing to unpack .../34-python3-lib2to3_3.12.3-1_all.deb ... Unpacking python3-lib2to3 (3.12.3-1) ... Selecting previously unselected package python3-distutils. Preparing to unpack .../35-python3-distutils_3.12.3-1_all.deb ... Unpacking python3-distutils (3.12.3-1) ... Selecting previously unselected package python3-setuptools. Preparing to unpack .../36-python3-setuptools_68.1.2-2_all.deb ... Unpacking python3-setuptools (68.1.2-2) ... Selecting previously unselected package dh-python. Preparing to unpack .../37-dh-python_6.20240422_all.deb ... Unpacking dh-python (6.20240422) ... Selecting previously unselected package libaec0:armhf. Preparing to unpack .../38-libaec0_1.1.3-1_armhf.deb ... Unpacking libaec0:armhf (1.1.3-1) ... Selecting previously unselected package libblas3:armhf. Preparing to unpack .../39-libblas3_3.12.0-3_armhf.deb ... Unpacking libblas3:armhf (3.12.0-3) ... Selecting previously unselected package libbrotli1:armhf. Preparing to unpack .../40-libbrotli1_1.1.0-2+b3_armhf.deb ... Unpacking libbrotli1:armhf (1.1.0-2+b3) ... Selecting previously unselected package libcom-err2:armhf. Preparing to unpack .../41-libcom-err2_1.47.1~rc2-1_armhf.deb ... Unpacking libcom-err2:armhf (1.47.1~rc2-1) ... Selecting previously unselected package libkrb5support0:armhf. Preparing to unpack .../42-libkrb5support0_1.20.1-6+b1_armhf.deb ... Unpacking libkrb5support0:armhf (1.20.1-6+b1) ... Selecting previously unselected package libk5crypto3:armhf. Preparing to unpack .../43-libk5crypto3_1.20.1-6+b1_armhf.deb ... Unpacking libk5crypto3:armhf (1.20.1-6+b1) ... Selecting previously unselected package libkeyutils1:armhf. Preparing to unpack .../44-libkeyutils1_1.6.3-3_armhf.deb ... Unpacking libkeyutils1:armhf (1.6.3-3) ... Selecting previously unselected package libkrb5-3:armhf. Preparing to unpack .../45-libkrb5-3_1.20.1-6+b1_armhf.deb ... Unpacking libkrb5-3:armhf (1.20.1-6+b1) ... Selecting previously unselected package libgssapi-krb5-2:armhf. Preparing to unpack .../46-libgssapi-krb5-2_1.20.1-6+b1_armhf.deb ... Unpacking libgssapi-krb5-2:armhf (1.20.1-6+b1) ... Selecting previously unselected package libnghttp2-14:armhf. Preparing to unpack .../47-libnghttp2-14_1.61.0-1+b1_armhf.deb ... Unpacking libnghttp2-14:armhf (1.61.0-1+b1) ... Selecting previously unselected package libpsl5t64:armhf. Preparing to unpack .../48-libpsl5t64_0.21.2-1.1_armhf.deb ... Unpacking libpsl5t64:armhf (0.21.2-1.1) ... Selecting previously unselected package librtmp1:armhf. Preparing to unpack .../49-librtmp1_2.4+20151223.gitfa8646d.1-2+b4_armhf.deb ... Unpacking librtmp1:armhf (2.4+20151223.gitfa8646d.1-2+b4) ... Selecting previously unselected package libssh2-1t64:armhf. Preparing to unpack .../50-libssh2-1t64_1.11.0-4.1+b2_armhf.deb ... Unpacking libssh2-1t64:armhf (1.11.0-4.1+b2) ... Selecting previously unselected package libcurl4t64:armhf. Preparing to unpack .../51-libcurl4t64_8.7.1-3_armhf.deb ... Unpacking libcurl4t64:armhf (8.7.1-3) ... Selecting previously unselected package liberfa1:armhf. Preparing to unpack .../52-liberfa1_2.0.1-1+b1_armhf.deb ... Unpacking liberfa1:armhf (2.0.1-1+b1) ... Selecting previously unselected package libgfortran5:armhf. Preparing to unpack .../53-libgfortran5_14-20240330-1_armhf.deb ... Unpacking libgfortran5:armhf (14-20240330-1) ... Selecting previously unselected package libsz2:armhf. Preparing to unpack .../54-libsz2_1.1.3-1_armhf.deb ... Unpacking libsz2:armhf (1.1.3-1) ... Selecting previously unselected package libhdf5-103-1t64:armhf. Preparing to unpack .../55-libhdf5-103-1t64_1.10.10+repack-3.3_armhf.deb ... Unpacking libhdf5-103-1t64:armhf (1.10.10+repack-3.3) ... Selecting previously unselected package libhdf5-hl-100t64:armhf. Preparing to unpack .../56-libhdf5-hl-100t64_1.10.10+repack-3.3_armhf.deb ... Unpacking libhdf5-hl-100t64:armhf (1.10.10+repack-3.3) ... Selecting previously unselected package libjs-jquery-isonscreen. Preparing to unpack .../57-libjs-jquery-isonscreen_1.2.0-1.1_all.deb ... Unpacking libjs-jquery-isonscreen (1.2.0-1.1) ... Selecting previously unselected package libjs-jquery-metadata. Preparing to unpack .../58-libjs-jquery-metadata_12-4_all.deb ... Unpacking libjs-jquery-metadata (12-4) ... Selecting previously unselected package libjs-jquery-tablesorter. Preparing to unpack .../59-libjs-jquery-tablesorter_1%3a2.31.3+dfsg1-3_all.deb ... Unpacking libjs-jquery-tablesorter (1:2.31.3+dfsg1-3) ... Selecting previously unselected package libjs-jquery-throttle-debounce. Preparing to unpack .../60-libjs-jquery-throttle-debounce_1.1+dfsg.1-2_all.deb ... Unpacking libjs-jquery-throttle-debounce (1.1+dfsg.1-2) ... Selecting previously unselected package libjs-underscore. Preparing to unpack .../61-libjs-underscore_1.13.4~dfsg+~1.11.4-3_all.deb ... Unpacking libjs-underscore (1.13.4~dfsg+~1.11.4-3) ... Selecting previously unselected package libjs-sphinxdoc. Preparing to unpack .../62-libjs-sphinxdoc_7.2.6-6_all.deb ... Unpacking libjs-sphinxdoc (7.2.6-6) ... Selecting previously unselected package liblapack3:armhf. Preparing to unpack .../63-liblapack3_3.12.0-3_armhf.deb ... Unpacking liblapack3:armhf (3.12.0-3) ... Selecting previously unselected package liblzf1:armhf. Preparing to unpack .../64-liblzf1_3.6-4+b1_armhf.deb ... Unpacking liblzf1:armhf (3.6-4+b1) ... Selecting previously unselected package libpython3.12-stdlib:armhf. Preparing to unpack .../65-libpython3.12-stdlib_3.12.3-1_armhf.deb ... Unpacking libpython3.12-stdlib:armhf (3.12.3-1) ... Selecting previously unselected package libwcs8:armhf. Preparing to unpack .../66-libwcs8_8.2.2+ds-3+b2_armhf.deb ... Unpacking libwcs8:armhf (8.2.2+ds-3+b2) ... Selecting previously unselected package libyaml-0-2:armhf. Preparing to unpack .../67-libyaml-0-2_0.2.5-1+b1_armhf.deb ... Unpacking libyaml-0-2:armhf (0.2.5-1+b1) ... Selecting previously unselected package python3.12. Preparing to unpack .../68-python3.12_3.12.3-1_armhf.deb ... Unpacking python3.12 (3.12.3-1) ... Selecting previously unselected package python3-all. Preparing to unpack .../69-python3-all_3.11.8-1_armhf.deb ... Unpacking python3-all (3.11.8-1) ... Selecting previously unselected package python3-configobj. Preparing to unpack .../70-python3-configobj_5.0.8-3_all.deb ... Unpacking python3-configobj (5.0.8-3) ... Selecting previously unselected package python3-iniconfig. Preparing to unpack .../71-python3-iniconfig_1.1.1-2_all.deb ... Unpacking python3-iniconfig (1.1.1-2) ... Selecting previously unselected package python3-packaging. Preparing to unpack .../72-python3-packaging_24.0-1_all.deb ... Unpacking python3-packaging (24.0-1) ... Selecting previously unselected package python3-pluggy. Preparing to unpack .../73-python3-pluggy_1.5.0-1_all.deb ... Unpacking python3-pluggy (1.5.0-1) ... Selecting previously unselected package python3-pytest. Preparing to unpack .../74-python3-pytest_7.4.4-3_all.deb ... Unpacking python3-pytest (7.4.4-3) ... Selecting previously unselected package python3-attr. Preparing to unpack .../75-python3-attr_23.2.0-2_all.deb ... Unpacking python3-attr (23.2.0-2) ... Selecting previously unselected package python3-six. Preparing to unpack .../76-python3-six_1.16.0-6_all.deb ... Unpacking python3-six (1.16.0-6) ... Selecting previously unselected package python3-dateutil. Preparing to unpack .../77-python3-dateutil_2.9.0-2_all.deb ... Unpacking python3-dateutil (2.9.0-2) ... Selecting previously unselected package python3-sortedcontainers. Preparing to unpack .../78-python3-sortedcontainers_2.4.0-2_all.deb ... Unpacking python3-sortedcontainers (2.4.0-2) ... Selecting previously unselected package python3-hypothesis. Preparing to unpack .../79-python3-hypothesis_6.100.4-1_all.deb ... Unpacking python3-hypothesis (6.100.4-1) ... Selecting previously unselected package python3-numpy. Preparing to unpack .../80-python3-numpy_1%3a1.26.4+ds-8_armhf.deb ... Unpacking python3-numpy (1:1.26.4+ds-8) ... Selecting previously unselected package python3-pytest-arraydiff. Preparing to unpack .../81-python3-pytest-arraydiff_0.6.1-3_all.deb ... Unpacking python3-pytest-arraydiff (0.6.1-3) ... Selecting previously unselected package python3-pytest-astropy-header. Preparing to unpack .../82-python3-pytest-astropy-header_0.2.2-1_all.deb ... Unpacking python3-pytest-astropy-header (0.2.2-1) ... Selecting previously unselected package python3-coverage. Preparing to unpack .../83-python3-coverage_7.2.7+dfsg1-1+b1_armhf.deb ... Unpacking python3-coverage (7.2.7+dfsg1-1+b1) ... Selecting previously unselected package python3-pytest-cov. Preparing to unpack .../84-python3-pytest-cov_5.0.0-1_all.deb ... Unpacking python3-pytest-cov (5.0.0-1) ... Selecting previously unselected package python3-pytest-doctestplus. Preparing to unpack .../85-python3-pytest-doctestplus_1.2.1-1_all.deb ... Unpacking python3-pytest-doctestplus (1.2.1-1) ... Selecting previously unselected package python3-pytest-filter-subpackage. Preparing to unpack .../86-python3-pytest-filter-subpackage_0.2.0-1_all.deb ... Unpacking python3-pytest-filter-subpackage (0.2.0-1) ... Selecting previously unselected package python3-pytest-mock. Preparing to unpack .../87-python3-pytest-mock_3.12.0-1.1_all.deb ... Unpacking python3-pytest-mock (3.12.0-1.1) ... Selecting previously unselected package python3-pytest-remotedata. Preparing to unpack .../88-python3-pytest-remotedata_0.4.1-1_all.deb ... Unpacking python3-pytest-remotedata (0.4.1-1) ... Selecting previously unselected package python3-pytest-astropy. Preparing to unpack .../89-python3-pytest-astropy_0.11.0-1_all.deb ... Unpacking python3-pytest-astropy (0.11.0-1) ... Selecting previously unselected package python3-ply. Preparing to unpack .../90-python3-ply_3.11-6_all.deb ... Unpacking python3-ply (3.11-6) ... Selecting previously unselected package python3-astropy-iers-data. Preparing to unpack .../91-python3-astropy-iers-data_0.2024.04.08.00.32.04-1_all.deb ... Unpacking python3-astropy-iers-data (0.2024.04.08.00.32.04-1) ... Selecting previously unselected package python3-erfa. Preparing to unpack .../92-python3-erfa_2.0.1.4+ds-1_armhf.deb ... Unpacking python3-erfa (2.0.1.4+ds-1) ... Selecting previously unselected package python3-yaml. Preparing to unpack .../93-python3-yaml_6.0.1-2_armhf.deb ... Unpacking python3-yaml (6.0.1-2) ... Selecting previously unselected package python3-astropy. Preparing to unpack .../94-python3-astropy_6.0.1-4_armhf.deb ... Unpacking python3-astropy (6.0.1-4) ... Selecting previously unselected package python3-h5py-serial. Preparing to unpack .../95-python3-h5py-serial_3.10.0-1+b3_armhf.deb ... Unpacking python3-h5py-serial (3.10.0-1+b3) ... Selecting previously unselected package python3-h5py. Preparing to unpack .../96-python3-h5py_3.10.0-1_all.deb ... Unpacking python3-h5py (3.10.0-1) ... Setting up libwcs8:armhf (8.2.2+ds-3+b2) ... Setting up media-types (10.1.0) ... Setting up libpipeline1:armhf (1.5.7-2) ... Setting up liberfa1:armhf (2.0.1-1+b1) ... Setting up libkeyutils1:armhf (1.6.3-3) ... Setting up libicu72:armhf (72.1-4+b1) ... Setting up bsdextrautils (2.40-8) ... Setting up libmagic-mgc (1:5.45-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libyaml-0-2:armhf (0.2.5-1+b1) ... Setting up libdebhelper-perl (13.15.3) ... Setting up libbrotli1:armhf (1.1.0-2+b3) ... Setting up libmagic1t64:armhf (1:5.45-3) ... Setting up libpython3.12-minimal:armhf (3.12.3-1) ... Setting up libpsl5t64:armhf (0.21.2-1.1) ... Setting up libnghttp2-14:armhf (1.61.0-1+b1) ... Setting up gettext-base (0.21-14+b1) ... Setting up m4 (1.4.19-4) ... Setting up libcom-err2:armhf (1.47.1~rc2-1) ... Setting up file (1:5.45-3) ... Setting up libjs-jquery-throttle-debounce (1.1+dfsg.1-2) ... Setting up libaec0:armhf (1.1.3-1) ... Setting up libelf1t64:armhf (0.191-1+b1) ... Setting up libkrb5support0:armhf (1.20.1-6+b1) ... Setting up tzdata (2024a-4) ... Current default time zone: 'Etc/UTC' Local time is now: Fri May 10 14:42:47 UTC 2024. Universal Time is now: Fri May 10 14:42:47 UTC 2024. Run 'dpkg-reconfigure tzdata' if you wish to change it. Setting up autotools-dev (20220109.1) ... Setting up libblas3:armhf (3.12.0-3) ... update-alternatives: using /usr/lib/arm-linux-gnueabihf/blas/libblas.so.3 to provide /usr/lib/arm-linux-gnueabihf/libblas.so.3 (libblas.so.3-arm-linux-gnueabihf) in auto mode Setting up librtmp1:armhf (2.4+20151223.gitfa8646d.1-2+b4) ... Setting up liblzf1:armhf (3.6-4+b1) ... Setting up autopoint (0.21-14) ... Setting up libk5crypto3:armhf (1.20.1-6+b1) ... Setting up libgfortran5:armhf (14-20240330-1) ... Setting up autoconf (2.71-3) ... Setting up dwz (0.15-1+b2) ... Setting up sensible-utils (0.0.22) ... Setting up libuchardet0:armhf (0.0.8-1+b1) ... Setting up libsub-override-perl (0.10-1) ... Setting up netbase (6.4) ... Setting up libkrb5-3:armhf (1.20.1-6+b1) ... Setting up libssh2-1t64:armhf (1.11.0-4.1+b2) ... Setting up libjs-jquery (3.6.1+dfsg+~3.5.14-1) ... Setting up libjs-jquery-hotkeys (0~20130707+git2d51e3a9+dfsg-2.1) ... Setting up readline-common (8.2-4) ... Setting up libxml2:armhf (2.9.14+dfsg-1.3+b3) ... Setting up libsz2:armhf (1.1.3-1) ... Setting up libjs-underscore (1.13.4~dfsg+~1.11.4-3) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.13.1-1) ... Setting up python3.12-minimal (3.12.3-1) ... Setting up liblapack3:armhf (3.12.0-3) ... update-alternatives: using /usr/lib/arm-linux-gnueabihf/lapack/liblapack.so.3 to provide /usr/lib/arm-linux-gnueabihf/liblapack.so.3 (liblapack.so.3-arm-linux-gnueabihf) in auto mode Setting up gettext (0.21-14+b1) ... Setting up libtool (2.4.7-7) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up libjs-jquery-metadata (12-4) ... Setting up libjs-jquery-isonscreen (1.2.0-1.1) ... Setting up libgssapi-krb5-2:armhf (1.20.1-6+b1) ... Setting up libjs-sphinxdoc (7.2.6-6) ... Setting up libreadline8t64:armhf (8.2-4) ... Setting up dh-strip-nondeterminism (1.13.1-1) ... Setting up libjs-jquery-tablesorter (1:2.31.3+dfsg1-3) ... Setting up groff-base (1.23.0-4) ... Setting up libpython3.12-stdlib:armhf (3.12.3-1) ... Setting up libcurl4t64:armhf (8.7.1-3) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up libpython3.11-stdlib:armhf (3.11.9-1) ... Setting up python3.12 (3.12.3-1) ... Setting up man-db (2.12.1-1) ... Not building database; man-db/auto-update is not 'true'. Setting up libhdf5-103-1t64:armhf (1.10.10+repack-3.3) ... Setting up libpython3-stdlib:armhf (3.11.8-1) ... Setting up libhdf5-hl-100t64:armhf (1.10.10+repack-3.3) ... Setting up python3.11 (3.11.9-1) ... Setting up debhelper (13.15.3) ... Setting up python3 (3.11.8-1) ... Setting up python3-sortedcontainers (2.4.0-2) ... Setting up python3-astropy-iers-data (0.2024.04.08.00.32.04-1) ... Setting up python3-six (1.16.0-6) ... Setting up python3-packaging (24.0-1) ... Setting up python3-configobj (5.0.8-3) ... Setting up python3-pluggy (1.5.0-1) ... Setting up python3-dateutil (2.9.0-2) ... Setting up python3-lib2to3 (3.12.3-1) ... Setting up python3-pkg-resources (68.1.2-2) ... Setting up python3-distutils (3.12.3-1) ... python3.12: can't get files for byte-compilation Setting up python3-iniconfig (1.1.1-2) ... Setting up python3-attr (23.2.0-2) ... Setting up python3-setuptools (68.1.2-2) ... Setting up python3-pytest (7.4.4-3) ... Setting up python3-hypothesis (6.100.4-1) ... Setting up python3-ply (3.11-6) ... Setting up python3-all (3.11.8-1) ... Setting up python3-coverage (7.2.7+dfsg1-1+b1) ... Setting up python3-yaml (6.0.1-2) ... Setting up python3-pytest-cov (5.0.0-1) ... Setting up python3-pytest-remotedata (0.4.1-1) ... Setting up python3-numpy (1:1.26.4+ds-8) ... Setting up python3-pytest-doctestplus (1.2.1-1) ... Setting up python3-pytest-mock (3.12.0-1.1) ... Setting up python3-pytest-filter-subpackage (0.2.0-1) ... Setting up python3-pytest-astropy-header (0.2.2-1) ... Setting up dh-python (6.20240422) ... Setting up python3-h5py-serial (3.10.0-1+b3) ... Setting up python3-pytest-arraydiff (0.6.1-3) ... Setting up python3-erfa (2.0.1.4+ds-1) ... Setting up python3-h5py (3.10.0-1) ... Setting up python3-pytest-astropy (0.11.0-1) ... Setting up python3-astropy (6.0.1-4) ... Processing triggers for libc-bin (2.38-7) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/reproducible-path/astrodendro-0.2.0+dfsg1/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../astrodendro_0.2.0+dfsg1-4_source.changes dpkg-buildpackage: info: source package astrodendro dpkg-buildpackage: info: source version 0.2.0+dfsg1-4 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Ole Streicher dpkg-source --before-build . dpkg-buildpackage: info: host architecture armhf debian/rules clean dh clean --with python3 --buildsystem=pybuild dh_auto_clean -O--buildsystem=pybuild I: pybuild base:311: python3.12 setup.py clean running clean removing '/build/reproducible-path/astrodendro-0.2.0+dfsg1/.pybuild/cpython3_3.12_astrodendro/build' (and everything under it) 'build/bdist.linux-armv7l' does not exist -- can't clean it 'build/scripts-3.12' does not exist -- can't clean it I: pybuild base:311: python3.11 setup.py clean running clean removing '/build/reproducible-path/astrodendro-0.2.0+dfsg1/.pybuild/cpython3_3.11_astrodendro/build' (and everything under it) 'build/bdist.linux-armv7l' does not exist -- can't clean it 'build/scripts-3.11' does not exist -- can't clean it dh_autoreconf_clean -O--buildsystem=pybuild dh_clean -O--buildsystem=pybuild debian/rules binary dh binary --with python3 --buildsystem=pybuild dh_update_autotools_config -O--buildsystem=pybuild dh_autoreconf -O--buildsystem=pybuild dh_auto_configure -O--buildsystem=pybuild I: pybuild base:311: python3.12 setup.py config running config I: pybuild base:311: python3.11 setup.py config running config dh_auto_build -O--buildsystem=pybuild I: pybuild base:311: /usr/bin/python3.12 setup.py build running build running build_py creating /build/reproducible-path/astrodendro-0.2.0+dfsg1/.pybuild/cpython3_3.12_astrodendro/build/astrodendro copying astrodendro/flux.py -> /build/reproducible-path/astrodendro-0.2.0+dfsg1/.pybuild/cpython3_3.12_astrodendro/build/astrodendro copying astrodendro/plot.py -> /build/reproducible-path/astrodendro-0.2.0+dfsg1/.pybuild/cpython3_3.12_astrodendro/build/astrodendro copying astrodendro/dendrogram.py -> /build/reproducible-path/astrodendro-0.2.0+dfsg1/.pybuild/cpython3_3.12_astrodendro/build/astrodendro copying astrodendro/viewer.py -> /build/reproducible-path/astrodendro-0.2.0+dfsg1/.pybuild/cpython3_3.12_astrodendro/build/astrodendro copying astrodendro/__init__.py -> /build/reproducible-path/astrodendro-0.2.0+dfsg1/.pybuild/cpython3_3.12_astrodendro/build/astrodendro copying astrodendro/structure_collection.py -> /build/reproducible-path/astrodendro-0.2.0+dfsg1/.pybuild/cpython3_3.12_astrodendro/build/astrodendro copying astrodendro/progressbar.py -> /build/reproducible-path/astrodendro-0.2.0+dfsg1/.pybuild/cpython3_3.12_astrodendro/build/astrodendro copying astrodendro/scatter.py -> /build/reproducible-path/astrodendro-0.2.0+dfsg1/.pybuild/cpython3_3.12_astrodendro/build/astrodendro copying astrodendro/structure.py -> /build/reproducible-path/astrodendro-0.2.0+dfsg1/.pybuild/cpython3_3.12_astrodendro/build/astrodendro copying astrodendro/six.py -> /build/reproducible-path/astrodendro-0.2.0+dfsg1/.pybuild/cpython3_3.12_astrodendro/build/astrodendro copying astrodendro/analysis.py -> /build/reproducible-path/astrodendro-0.2.0+dfsg1/.pybuild/cpython3_3.12_astrodendro/build/astrodendro copying astrodendro/pruning.py -> /build/reproducible-path/astrodendro-0.2.0+dfsg1/.pybuild/cpython3_3.12_astrodendro/build/astrodendro creating /build/reproducible-path/astrodendro-0.2.0+dfsg1/.pybuild/cpython3_3.12_astrodendro/build/astrodendro/io copying astrodendro/io/hdf5.py -> /build/reproducible-path/astrodendro-0.2.0+dfsg1/.pybuild/cpython3_3.12_astrodendro/build/astrodendro/io copying astrodendro/io/__init__.py -> /build/reproducible-path/astrodendro-0.2.0+dfsg1/.pybuild/cpython3_3.12_astrodendro/build/astrodendro/io copying astrodendro/io/handler.py -> /build/reproducible-path/astrodendro-0.2.0+dfsg1/.pybuild/cpython3_3.12_astrodendro/build/astrodendro/io copying astrodendro/io/fits.py -> /build/reproducible-path/astrodendro-0.2.0+dfsg1/.pybuild/cpython3_3.12_astrodendro/build/astrodendro/io copying astrodendro/io/util.py -> /build/reproducible-path/astrodendro-0.2.0+dfsg1/.pybuild/cpython3_3.12_astrodendro/build/astrodendro/io I: pybuild base:311: /usr/bin/python3 setup.py build running build running build_py creating /build/reproducible-path/astrodendro-0.2.0+dfsg1/.pybuild/cpython3_3.11_astrodendro/build/astrodendro copying astrodendro/flux.py -> /build/reproducible-path/astrodendro-0.2.0+dfsg1/.pybuild/cpython3_3.11_astrodendro/build/astrodendro copying astrodendro/plot.py -> /build/reproducible-path/astrodendro-0.2.0+dfsg1/.pybuild/cpython3_3.11_astrodendro/build/astrodendro copying astrodendro/dendrogram.py -> /build/reproducible-path/astrodendro-0.2.0+dfsg1/.pybuild/cpython3_3.11_astrodendro/build/astrodendro copying astrodendro/viewer.py -> /build/reproducible-path/astrodendro-0.2.0+dfsg1/.pybuild/cpython3_3.11_astrodendro/build/astrodendro copying astrodendro/__init__.py -> /build/reproducible-path/astrodendro-0.2.0+dfsg1/.pybuild/cpython3_3.11_astrodendro/build/astrodendro copying astrodendro/structure_collection.py -> /build/reproducible-path/astrodendro-0.2.0+dfsg1/.pybuild/cpython3_3.11_astrodendro/build/astrodendro copying astrodendro/progressbar.py -> /build/reproducible-path/astrodendro-0.2.0+dfsg1/.pybuild/cpython3_3.11_astrodendro/build/astrodendro copying astrodendro/scatter.py -> /build/reproducible-path/astrodendro-0.2.0+dfsg1/.pybuild/cpython3_3.11_astrodendro/build/astrodendro copying astrodendro/structure.py -> /build/reproducible-path/astrodendro-0.2.0+dfsg1/.pybuild/cpython3_3.11_astrodendro/build/astrodendro copying astrodendro/six.py -> /build/reproducible-path/astrodendro-0.2.0+dfsg1/.pybuild/cpython3_3.11_astrodendro/build/astrodendro copying astrodendro/analysis.py -> /build/reproducible-path/astrodendro-0.2.0+dfsg1/.pybuild/cpython3_3.11_astrodendro/build/astrodendro copying astrodendro/pruning.py -> /build/reproducible-path/astrodendro-0.2.0+dfsg1/.pybuild/cpython3_3.11_astrodendro/build/astrodendro creating /build/reproducible-path/astrodendro-0.2.0+dfsg1/.pybuild/cpython3_3.11_astrodendro/build/astrodendro/io copying astrodendro/io/hdf5.py -> /build/reproducible-path/astrodendro-0.2.0+dfsg1/.pybuild/cpython3_3.11_astrodendro/build/astrodendro/io copying astrodendro/io/__init__.py -> /build/reproducible-path/astrodendro-0.2.0+dfsg1/.pybuild/cpython3_3.11_astrodendro/build/astrodendro/io copying astrodendro/io/handler.py -> /build/reproducible-path/astrodendro-0.2.0+dfsg1/.pybuild/cpython3_3.11_astrodendro/build/astrodendro/io copying astrodendro/io/fits.py -> /build/reproducible-path/astrodendro-0.2.0+dfsg1/.pybuild/cpython3_3.11_astrodendro/build/astrodendro/io copying astrodendro/io/util.py -> /build/reproducible-path/astrodendro-0.2.0+dfsg1/.pybuild/cpython3_3.11_astrodendro/build/astrodendro/io create-stamp debian/debhelper-build-stamp dh_testroot -O--buildsystem=pybuild dh_prep -O--buildsystem=pybuild dh_auto_install --destdir=debian/python3-astrodendro/ -O--buildsystem=pybuild I: pybuild base:311: /usr/bin/python3.12 setup.py install --root /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro running install /usr/lib/python3/dist-packages/setuptools/_distutils/cmd.py:66: SetuptoolsDeprecationWarning: setup.py install is deprecated. !! ******************************************************************************** Please avoid running ``setup.py`` directly. Instead, use pypa/build, pypa/installer or other standards-based tools. See https://blog.ganssle.io/articles/2021/10/setup-py-deprecated.html for details. ******************************************************************************** !! self.initialize_options() running build running build_py running install_lib creating /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr creating /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib creating /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.12 creating /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.12/dist-packages creating /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.12/dist-packages/astrodendro copying /build/reproducible-path/astrodendro-0.2.0+dfsg1/.pybuild/cpython3_3.12_astrodendro/build/astrodendro/flux.py -> /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.12/dist-packages/astrodendro copying /build/reproducible-path/astrodendro-0.2.0+dfsg1/.pybuild/cpython3_3.12_astrodendro/build/astrodendro/plot.py -> /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.12/dist-packages/astrodendro copying /build/reproducible-path/astrodendro-0.2.0+dfsg1/.pybuild/cpython3_3.12_astrodendro/build/astrodendro/dendrogram.py -> /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.12/dist-packages/astrodendro copying /build/reproducible-path/astrodendro-0.2.0+dfsg1/.pybuild/cpython3_3.12_astrodendro/build/astrodendro/viewer.py -> /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.12/dist-packages/astrodendro creating /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.12/dist-packages/astrodendro/io copying /build/reproducible-path/astrodendro-0.2.0+dfsg1/.pybuild/cpython3_3.12_astrodendro/build/astrodendro/io/hdf5.py -> /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.12/dist-packages/astrodendro/io copying /build/reproducible-path/astrodendro-0.2.0+dfsg1/.pybuild/cpython3_3.12_astrodendro/build/astrodendro/io/__init__.py -> /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.12/dist-packages/astrodendro/io copying /build/reproducible-path/astrodendro-0.2.0+dfsg1/.pybuild/cpython3_3.12_astrodendro/build/astrodendro/io/handler.py -> /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.12/dist-packages/astrodendro/io copying /build/reproducible-path/astrodendro-0.2.0+dfsg1/.pybuild/cpython3_3.12_astrodendro/build/astrodendro/io/fits.py -> /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.12/dist-packages/astrodendro/io copying /build/reproducible-path/astrodendro-0.2.0+dfsg1/.pybuild/cpython3_3.12_astrodendro/build/astrodendro/io/util.py -> /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.12/dist-packages/astrodendro/io copying /build/reproducible-path/astrodendro-0.2.0+dfsg1/.pybuild/cpython3_3.12_astrodendro/build/astrodendro/__init__.py -> /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.12/dist-packages/astrodendro copying /build/reproducible-path/astrodendro-0.2.0+dfsg1/.pybuild/cpython3_3.12_astrodendro/build/astrodendro/structure_collection.py -> /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.12/dist-packages/astrodendro copying /build/reproducible-path/astrodendro-0.2.0+dfsg1/.pybuild/cpython3_3.12_astrodendro/build/astrodendro/progressbar.py -> /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.12/dist-packages/astrodendro copying /build/reproducible-path/astrodendro-0.2.0+dfsg1/.pybuild/cpython3_3.12_astrodendro/build/astrodendro/scatter.py -> /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.12/dist-packages/astrodendro copying /build/reproducible-path/astrodendro-0.2.0+dfsg1/.pybuild/cpython3_3.12_astrodendro/build/astrodendro/structure.py -> /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.12/dist-packages/astrodendro copying /build/reproducible-path/astrodendro-0.2.0+dfsg1/.pybuild/cpython3_3.12_astrodendro/build/astrodendro/six.py -> /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.12/dist-packages/astrodendro copying /build/reproducible-path/astrodendro-0.2.0+dfsg1/.pybuild/cpython3_3.12_astrodendro/build/astrodendro/analysis.py -> /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.12/dist-packages/astrodendro copying /build/reproducible-path/astrodendro-0.2.0+dfsg1/.pybuild/cpython3_3.12_astrodendro/build/astrodendro/pruning.py -> /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.12/dist-packages/astrodendro byte-compiling /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.12/dist-packages/astrodendro/flux.py to flux.cpython-312.pyc byte-compiling /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.12/dist-packages/astrodendro/plot.py to plot.cpython-312.pyc byte-compiling /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.12/dist-packages/astrodendro/dendrogram.py to dendrogram.cpython-312.pyc byte-compiling /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.12/dist-packages/astrodendro/viewer.py to viewer.cpython-312.pyc byte-compiling /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.12/dist-packages/astrodendro/io/hdf5.py to hdf5.cpython-312.pyc byte-compiling /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.12/dist-packages/astrodendro/io/__init__.py to __init__.cpython-312.pyc byte-compiling /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.12/dist-packages/astrodendro/io/handler.py to handler.cpython-312.pyc byte-compiling /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.12/dist-packages/astrodendro/io/fits.py to fits.cpython-312.pyc byte-compiling /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.12/dist-packages/astrodendro/io/util.py to util.cpython-312.pyc byte-compiling /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.12/dist-packages/astrodendro/__init__.py to __init__.cpython-312.pyc byte-compiling /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.12/dist-packages/astrodendro/structure_collection.py to structure_collection.cpython-312.pyc byte-compiling /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.12/dist-packages/astrodendro/progressbar.py to progressbar.cpython-312.pyc byte-compiling /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.12/dist-packages/astrodendro/scatter.py to scatter.cpython-312.pyc byte-compiling /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.12/dist-packages/astrodendro/structure.py to structure.cpython-312.pyc byte-compiling /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.12/dist-packages/astrodendro/six.py to six.cpython-312.pyc byte-compiling /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.12/dist-packages/astrodendro/analysis.py to analysis.cpython-312.pyc byte-compiling /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.12/dist-packages/astrodendro/pruning.py to pruning.cpython-312.pyc running install_egg_info running egg_info creating astrodendro.egg-info writing astrodendro.egg-info/PKG-INFO writing dependency_links to astrodendro.egg-info/dependency_links.txt writing top-level names to astrodendro.egg-info/top_level.txt writing manifest file 'astrodendro.egg-info/SOURCES.txt' /usr/lib/python3/dist-packages/setuptools/command/sdist.py:126: SetuptoolsDeprecationWarning: `build_py` command does not inherit from setuptools' `build_py`. !! ******************************************************************************** Custom 'build_py' does not implement 'get_data_files_without_manifest'. Please extend command classes from setuptools instead of distutils. See https://peps.python.org/pep-0632/ for details. ******************************************************************************** !! self._add_data_files(self._safe_data_files(build_py)) reading manifest file 'astrodendro.egg-info/SOURCES.txt' reading manifest template 'MANIFEST.in' warning: no files found matching '*.npz' under directory 'astrodendro/tests' warning: no files found matching '*.fits' under directory 'astrodendro/tests/benchmark_data' adding license file 'LICENSE' writing manifest file 'astrodendro.egg-info/SOURCES.txt' Copying astrodendro.egg-info to /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.12/dist-packages/astrodendro-0.2.0.egg-info Skipping SOURCES.txt running install_scripts I: pybuild base:311: /usr/bin/python3 setup.py install --root /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro running install /usr/lib/python3/dist-packages/setuptools/_distutils/cmd.py:66: SetuptoolsDeprecationWarning: setup.py install is deprecated. !! ******************************************************************************** Please avoid running ``setup.py`` directly. Instead, use pypa/build, pypa/installer or other standards-based tools. See https://blog.ganssle.io/articles/2021/10/setup-py-deprecated.html for details. ******************************************************************************** !! self.initialize_options() running build running build_py running install_lib creating /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.11 creating /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.11/dist-packages creating /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.11/dist-packages/astrodendro copying /build/reproducible-path/astrodendro-0.2.0+dfsg1/.pybuild/cpython3_3.11_astrodendro/build/astrodendro/flux.py -> /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.11/dist-packages/astrodendro copying /build/reproducible-path/astrodendro-0.2.0+dfsg1/.pybuild/cpython3_3.11_astrodendro/build/astrodendro/plot.py -> /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.11/dist-packages/astrodendro copying /build/reproducible-path/astrodendro-0.2.0+dfsg1/.pybuild/cpython3_3.11_astrodendro/build/astrodendro/dendrogram.py -> /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.11/dist-packages/astrodendro copying /build/reproducible-path/astrodendro-0.2.0+dfsg1/.pybuild/cpython3_3.11_astrodendro/build/astrodendro/viewer.py -> /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.11/dist-packages/astrodendro creating /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.11/dist-packages/astrodendro/io copying /build/reproducible-path/astrodendro-0.2.0+dfsg1/.pybuild/cpython3_3.11_astrodendro/build/astrodendro/io/hdf5.py -> /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.11/dist-packages/astrodendro/io copying /build/reproducible-path/astrodendro-0.2.0+dfsg1/.pybuild/cpython3_3.11_astrodendro/build/astrodendro/io/__init__.py -> /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.11/dist-packages/astrodendro/io copying /build/reproducible-path/astrodendro-0.2.0+dfsg1/.pybuild/cpython3_3.11_astrodendro/build/astrodendro/io/handler.py -> /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.11/dist-packages/astrodendro/io copying /build/reproducible-path/astrodendro-0.2.0+dfsg1/.pybuild/cpython3_3.11_astrodendro/build/astrodendro/io/fits.py -> /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.11/dist-packages/astrodendro/io copying /build/reproducible-path/astrodendro-0.2.0+dfsg1/.pybuild/cpython3_3.11_astrodendro/build/astrodendro/io/util.py -> /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.11/dist-packages/astrodendro/io copying /build/reproducible-path/astrodendro-0.2.0+dfsg1/.pybuild/cpython3_3.11_astrodendro/build/astrodendro/__init__.py -> /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.11/dist-packages/astrodendro copying /build/reproducible-path/astrodendro-0.2.0+dfsg1/.pybuild/cpython3_3.11_astrodendro/build/astrodendro/structure_collection.py -> /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.11/dist-packages/astrodendro copying /build/reproducible-path/astrodendro-0.2.0+dfsg1/.pybuild/cpython3_3.11_astrodendro/build/astrodendro/progressbar.py -> /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.11/dist-packages/astrodendro copying /build/reproducible-path/astrodendro-0.2.0+dfsg1/.pybuild/cpython3_3.11_astrodendro/build/astrodendro/scatter.py -> /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.11/dist-packages/astrodendro copying /build/reproducible-path/astrodendro-0.2.0+dfsg1/.pybuild/cpython3_3.11_astrodendro/build/astrodendro/structure.py -> /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.11/dist-packages/astrodendro copying /build/reproducible-path/astrodendro-0.2.0+dfsg1/.pybuild/cpython3_3.11_astrodendro/build/astrodendro/six.py -> /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.11/dist-packages/astrodendro copying /build/reproducible-path/astrodendro-0.2.0+dfsg1/.pybuild/cpython3_3.11_astrodendro/build/astrodendro/analysis.py -> /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.11/dist-packages/astrodendro copying /build/reproducible-path/astrodendro-0.2.0+dfsg1/.pybuild/cpython3_3.11_astrodendro/build/astrodendro/pruning.py -> /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.11/dist-packages/astrodendro byte-compiling /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.11/dist-packages/astrodendro/flux.py to flux.cpython-311.pyc byte-compiling /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.11/dist-packages/astrodendro/plot.py to plot.cpython-311.pyc byte-compiling /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.11/dist-packages/astrodendro/dendrogram.py to dendrogram.cpython-311.pyc byte-compiling /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.11/dist-packages/astrodendro/viewer.py to viewer.cpython-311.pyc byte-compiling /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.11/dist-packages/astrodendro/io/hdf5.py to hdf5.cpython-311.pyc byte-compiling /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.11/dist-packages/astrodendro/io/__init__.py to __init__.cpython-311.pyc byte-compiling /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.11/dist-packages/astrodendro/io/handler.py to handler.cpython-311.pyc byte-compiling /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.11/dist-packages/astrodendro/io/fits.py to fits.cpython-311.pyc byte-compiling /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.11/dist-packages/astrodendro/io/util.py to util.cpython-311.pyc byte-compiling /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.11/dist-packages/astrodendro/__init__.py to __init__.cpython-311.pyc byte-compiling /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.11/dist-packages/astrodendro/structure_collection.py to structure_collection.cpython-311.pyc byte-compiling /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.11/dist-packages/astrodendro/progressbar.py to progressbar.cpython-311.pyc byte-compiling /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.11/dist-packages/astrodendro/scatter.py to scatter.cpython-311.pyc byte-compiling /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.11/dist-packages/astrodendro/structure.py to structure.cpython-311.pyc byte-compiling /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.11/dist-packages/astrodendro/six.py to six.cpython-311.pyc byte-compiling /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.11/dist-packages/astrodendro/analysis.py to analysis.cpython-311.pyc byte-compiling /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.11/dist-packages/astrodendro/pruning.py to pruning.cpython-311.pyc running install_egg_info running egg_info writing astrodendro.egg-info/PKG-INFO writing dependency_links to astrodendro.egg-info/dependency_links.txt writing top-level names to astrodendro.egg-info/top_level.txt /usr/lib/python3/dist-packages/setuptools/command/sdist.py:126: SetuptoolsDeprecationWarning: `build_py` command does not inherit from setuptools' `build_py`. !! ******************************************************************************** Custom 'build_py' does not implement 'get_data_files_without_manifest'. Please extend command classes from setuptools instead of distutils. See https://peps.python.org/pep-0632/ for details. ******************************************************************************** !! self._add_data_files(self._safe_data_files(build_py)) reading manifest file 'astrodendro.egg-info/SOURCES.txt' reading manifest template 'MANIFEST.in' warning: no files found matching '*.npz' under directory 'astrodendro/tests' warning: no files found matching '*.fits' under directory 'astrodendro/tests/benchmark_data' adding license file 'LICENSE' writing manifest file 'astrodendro.egg-info/SOURCES.txt' Copying astrodendro.egg-info to /build/reproducible-path/astrodendro-0.2.0+dfsg1/debian/python3-astrodendro/usr/lib/python3.11/dist-packages/astrodendro-0.2.0.egg-info Skipping SOURCES.txt running install_scripts dh_installdocs -O--buildsystem=pybuild dh_installchangelogs -O--buildsystem=pybuild dh_python3 -O--buildsystem=pybuild dh_installsystemduser -O--buildsystem=pybuild dh_perl -O--buildsystem=pybuild dh_link -O--buildsystem=pybuild dh_strip_nondeterminism -O--buildsystem=pybuild dh_compress -O--buildsystem=pybuild dh_fixperms -O--buildsystem=pybuild dh_missing -O--buildsystem=pybuild dh_installdeb -O--buildsystem=pybuild dh_gencontrol -O--buildsystem=pybuild dh_md5sums -O--buildsystem=pybuild dh_builddeb -O--buildsystem=pybuild dpkg-deb: building package 'python3-astrodendro' in '../python3-astrodendro_0.2.0+dfsg1-4_all.deb'. dpkg-genbuildinfo --build=binary -O../astrodendro_0.2.0+dfsg1-4_armhf.buildinfo dpkg-genchanges --build=binary -O../astrodendro_0.2.0+dfsg1-4_armhf.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/13316 and its subdirectories I: Current time: Fri May 10 02:45:17 -12 2024 I: pbuilder-time-stamp: 1715352317 Fri May 10 14:45:25 UTC 2024 I: 1st build successful. Starting 2nd build on remote node virt64z-armhf-rb.debian.net. Fri May 10 14:45:25 UTC 2024 I: Preparing to do remote build '2' on virt64z-armhf-rb.debian.net. Fri May 10 14:47:25 UTC 2024 I: Deleting $TMPDIR on virt64z-armhf-rb.debian.net. Fri May 10 14:47:28 UTC 2024 I: astrodendro_0.2.0+dfsg1-4_armhf.changes: Format: 1.8 Date: Tue, 17 Jan 2023 09:23:28 +0100 Source: astrodendro Binary: python3-astrodendro Architecture: all Version: 0.2.0+dfsg1-4 Distribution: unstable Urgency: medium Maintainer: Debian Astronomy Maintainers Changed-By: Ole Streicher Description: python3-astrodendro - Astronomical Dendrograms in Python 3 Closes: 1027188 Changes: astrodendro (0.2.0+dfsg1-4) unstable; urgency=medium . * Team upload. * Fix compability to numpy 1.24 (Closes: #1027188) Checksums-Sha1: ce4d12f2c02e7a9b93ebe9a3fc570f912ac2b903 7670 astrodendro_0.2.0+dfsg1-4_armhf.buildinfo 37326b22dee6e68ac6e4eb76a72b6dfa83c49e21 34840 python3-astrodendro_0.2.0+dfsg1-4_all.deb Checksums-Sha256: d29f114672598a3031e9d196efe2638d4e3f806946a98e952b100f87ec09fa9c 7670 astrodendro_0.2.0+dfsg1-4_armhf.buildinfo 8cd7c0d9fe22fa5725111dc8b22fd6816ae05d4930a9bbe1b1f4297f045bd18b 34840 python3-astrodendro_0.2.0+dfsg1-4_all.deb Files: fb52c1612e0d02e7374f58821aa2b7b5 7670 python optional astrodendro_0.2.0+dfsg1-4_armhf.buildinfo c6417112cfe9be3364ca2d27d923cda5 34840 python optional python3-astrodendro_0.2.0+dfsg1-4_all.deb Fri May 10 14:47:29 UTC 2024 I: diffoscope 265 will be used to compare the two builds: Running as unit: rb-diffoscope-armhf_16-5544.service # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.TCAqOXgM/astrodendro_0.2.0+dfsg1-4.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.TCAqOXgM/astrodendro_0.2.0+dfsg1-4.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.TCAqOXgM/astrodendro_0.2.0+dfsg1-4.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.TCAqOXgM/b1/astrodendro_0.2.0+dfsg1-4_armhf.changes /srv/reproducible-results/rbuild-debian/r-b-build.TCAqOXgM/b2/astrodendro_0.2.0+dfsg1-4_armhf.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.358s) 0.358s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.014s) 0.014s 12 calls diffoscope.comparators.binary.FilesystemFile ## specialize (total time: 0.000s) 0.000s 1 call specialize Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 682ms CPU time consumed: 683ms Fri May 10 14:47:30 UTC 2024 I: diffoscope 265 found no differences in the changes files, and a .buildinfo file also exists. Fri May 10 14:47:30 UTC 2024 I: astrodendro from trixie built successfully and reproducibly on armhf. Fri May 10 14:47:31 UTC 2024 I: Submitting .buildinfo files to external archives: Fri May 10 14:47:31 UTC 2024 I: Submitting 12K b1/astrodendro_0.2.0+dfsg1-4_armhf.buildinfo.asc Fri May 10 14:47:32 UTC 2024 I: Submitting 12K b2/astrodendro_0.2.0+dfsg1-4_armhf.buildinfo.asc Fri May 10 14:47:33 UTC 2024 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Fri May 10 14:47:33 UTC 2024 I: Done submitting .buildinfo files. Fri May 10 14:47:33 UTC 2024 I: Removing signed astrodendro_0.2.0+dfsg1-4_armhf.buildinfo.asc files: removed './b1/astrodendro_0.2.0+dfsg1-4_armhf.buildinfo.asc' removed './b2/astrodendro_0.2.0+dfsg1-4_armhf.buildinfo.asc'