Fri Jun 14 23:07:14 UTC 2024 I: starting to build units/trixie/arm64 on jenkins on '2024-06-14 23:06' Fri Jun 14 23:07:14 UTC 2024 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/arm64_4/23344/console.log Fri Jun 14 23:07:14 UTC 2024 I: Downloading source for trixie/units=2.23-1 --2024-06-14 23:07:15-- http://deb.debian.org/debian/pool/main/u/units/units_2.23-1.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2061 (2.0K) [text/prs.lines.tag] Saving to: ‘units_2.23-1.dsc’ 0K .. 100% 204M=0s 2024-06-14 23:07:15 (204 MB/s) - ‘units_2.23-1.dsc’ saved [2061/2061] Fri Jun 14 23:07:15 UTC 2024 I: units_2.23-1.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: units Binary: units Architecture: any Version: 2.23-1 Maintainer: Stephen Kitt Homepage: https://www.gnu.org/software/units/ Standards-Version: 4.6.2 Vcs-Browser: https://salsa.debian.org/debian/units Vcs-Git: https://salsa.debian.org/debian/units.git Build-Depends: bison, debhelper-compat (= 13), libreadline-dev, python3, texinfo Package-List: units deb utils optional arch=any Checksums-Sha1: d080c2791a377da59f5802526c8f53e6c237b704 1423494 units_2.23.orig.tar.gz 1680a5c1806188228b3b390495e7dcc16ecceb00 195 units_2.23.orig.tar.gz.asc 3435df5b710431b00a699807e3c22bd6d656da4b 9844 units_2.23-1.debian.tar.xz Checksums-Sha256: d957b451245925c9e614c4513397449630eaf92bd62b8495ba09bbe351a17370 1423494 units_2.23.orig.tar.gz ad8df5bd162f214f5813788aeea21192c257eedc9394dbcbb410ecce225f86c3 195 units_2.23.orig.tar.gz.asc 3f90fe274a90f4af6ec066314e6c238cf5086cfad5f327b5666a457b1cf1d93b 9844 units_2.23-1.debian.tar.xz Files: 2cb4f754dcde5b2409e656f5d8d4a474 1423494 units_2.23.orig.tar.gz 2cbf34a30c0bb935b42e2f06a658acef 195 units_2.23.orig.tar.gz.asc ecd2a66e221f23e055011a6aef335c0d 9844 units_2.23-1.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQIzBAEBCgAdFiEEnPVX/hPLkMoq7x0ggNMC9Yhtg5wFAmXfD+8ACgkQgNMC9Yht g5yiKg//WgQaIdSoohZ3gg4NE2LOXAzpo60JL438nhDJUfFzBAhwvigkQXTdKyqX AAjYRPNxDYFvFUEq9C6edAQSLozKGvVzF6hGYMCiwLfzeudgwOf77U6mj6xufZz0 J+qHWZuXW1nhmGc4Uu+s6V2oCdqvPaLlsXnDThTztOSKHZNn2u5lx8ULs7p6zhZj PmYWyQOovEHVBuWJnF5jvq59ChuonPW2Rxlkma4lYwvHxMSzA2eVd1LgfVRHze4E ycvyrn6pdtSzK38vj3IKdC52uUSZ9osfPWfdIrQPE8rstmjyrMaPF4txWi3Wq3Ta dKR28uO08jqmH0z3cxID7FpHL2HayLHQ2z+cnGUojpqgc1MEb4RnQ9G9gdJbrQN2 lIUJsUZNsw9AvNeYFaB5P4jBeszIZ72JySh+sNlcNYqlMCQ/xd2Hzca7AXzi/s6F g0cfcWmmedVUqO2BCLrdJFRSEh8xxfbHvuF0LuJ/y8PUG06nQcHJmXaKP+/jMPTd h2YSdPCsnvs79GUGuDY39/6HNTN9wPBR27ZaqGDyg3V8g94XPEGeMPLih6lAnUsl EwS6hdxVdpkvYPhBu3CQeC372E3OZ737EFu7TyJrvnO6qZ4LHz4k27v0Vmyom+OX ZOaehbdFlg6pmEB2F2Rwo2x2WCKAT9elRgtU2+HuKqIUkygPo3s= =KYyJ -----END PGP SIGNATURE----- Fri Jun 14 23:07:15 UTC 2024 I: Checking whether the package is not for us Fri Jun 14 23:07:15 UTC 2024 I: Starting 1st build on remote node codethink02-arm64.debian.net. Fri Jun 14 23:07:15 UTC 2024 I: Preparing to do remote build '1' on codethink02-arm64.debian.net. Fri Jun 14 23:08:24 UTC 2024 I: Deleting $TMPDIR on codethink02-arm64.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Fri Jun 14 11:07:18 -12 2024 I: pbuilder-time-stamp: 1718406438 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [units_2.23-1.dsc] I: copying [./units_2.23.orig.tar.gz] I: copying [./units_2.23.orig.tar.gz.asc] I: copying [./units_2.23-1.debian.tar.xz] I: Extracting source gpgv: Signature made Wed Feb 28 10:50:23 2024 gpgv: using RSA key 9CF557FE13CB90CA2AEF1D2080D302F5886D839C gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./units_2.23-1.dsc: no acceptable signature found dpkg-source: info: extracting units in units-2.23 dpkg-source: info: unpacking units_2.23.orig.tar.gz dpkg-source: info: unpacking units_2.23-1.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying no-currency-update-during-build.patch I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/70075/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='arm64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='arm64' IFS=' ' INVOCATION_ID='8bfe5ec94e8e4f9281e464d0d637c53c' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='70075' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.kh4dXm2i/pbuilderrc_SLeS --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.kh4dXm2i/b1 --logfile b1/build.log units_2.23-1.dsc' SUDO_GID='109' SUDO_UID='104' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://192.168.101.4:3128' I: uname -a Linux codethink02-arm64 6.1.0-21-cloud-arm64 #1 SMP Debian 6.1.90-1 (2024-05-03) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Jun 12 11:24 /bin -> usr/bin I: user script /srv/workspace/pbuilder/70075/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: bison, debhelper-compat (= 13), libreadline-dev, python3, texinfo dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19743 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on bison; however: Package bison is not installed. pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libreadline-dev; however: Package libreadline-dev is not installed. pbuilder-satisfydepends-dummy depends on python3; however: Package python3 is not installed. pbuilder-satisfydepends-dummy depends on texinfo; however: Package texinfo is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bison{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1t64{a} libexpat1{a} libfile-stripnondeterminism-perl{a} libicu72{a} libmagic-mgc{a} libmagic1t64{a} libncurses-dev{a} libncurses6{a} libpipeline1{a} libpython3-stdlib{a} libpython3.11-minimal{a} libpython3.11-stdlib{a} libreadline-dev{a} libreadline8t64{a} libtext-unidecode-perl{a} libtool{a} libuchardet0{a} libxml-libxml-perl{a} libxml-namespacesupport-perl{a} libxml-sax-base-perl{a} libxml-sax-perl{a} libxml2{a} m4{a} man-db{a} media-types{a} netbase{a} po-debconf{a} python3{a} python3-minimal{a} python3.11{a} python3.11-minimal{a} readline-common{a} sensible-utils{a} tex-common{a} texinfo{a} texinfo-lib{a} tzdata{a} ucf{a} The following packages are RECOMMENDED but will NOT be installed: ca-certificates curl libarchive-cpio-perl libgpm2 libltdl-dev libmail-sendmail-perl libwww-perl libxml-sax-expat-perl lynx wget 0 packages upgraded, 55 newly installed, 0 to remove and 0 not upgraded. Need to get 28.6 MB of archives. After unpacking 123 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main arm64 libpython3.11-minimal arm64 3.11.9-1 [813 kB] Get: 2 http://deb.debian.org/debian trixie/main arm64 libexpat1 arm64 2.6.2-1 [88.7 kB] Get: 3 http://deb.debian.org/debian trixie/main arm64 python3.11-minimal arm64 3.11.9-1 [1767 kB] Get: 4 http://deb.debian.org/debian trixie/main arm64 python3-minimal arm64 3.11.8-1 [26.3 kB] Get: 5 http://deb.debian.org/debian trixie/main arm64 media-types all 10.1.0 [26.9 kB] Get: 6 http://deb.debian.org/debian trixie/main arm64 netbase all 6.4 [12.8 kB] Get: 7 http://deb.debian.org/debian trixie/main arm64 tzdata all 2024a-4 [255 kB] Get: 8 http://deb.debian.org/debian trixie/main arm64 readline-common all 8.2-4 [69.3 kB] Get: 9 http://deb.debian.org/debian trixie/main arm64 libreadline8t64 arm64 8.2-4 [157 kB] Get: 10 http://deb.debian.org/debian trixie/main arm64 libpython3.11-stdlib arm64 3.11.9-1 [1775 kB] Get: 11 http://deb.debian.org/debian trixie/main arm64 python3.11 arm64 3.11.9-1 [602 kB] Get: 12 http://deb.debian.org/debian trixie/main arm64 libpython3-stdlib arm64 3.11.8-1 [9332 B] Get: 13 http://deb.debian.org/debian trixie/main arm64 python3 arm64 3.11.8-1 [27.4 kB] Get: 14 http://deb.debian.org/debian trixie/main arm64 sensible-utils all 0.0.22 [22.4 kB] Get: 15 http://deb.debian.org/debian trixie/main arm64 libmagic-mgc arm64 1:5.45-3 [314 kB] Get: 16 http://deb.debian.org/debian trixie/main arm64 libmagic1t64 arm64 1:5.45-3 [100 kB] Get: 17 http://deb.debian.org/debian trixie/main arm64 file arm64 1:5.45-3 [43.0 kB] Get: 18 http://deb.debian.org/debian trixie/main arm64 gettext-base arm64 0.21-14+b1 [160 kB] Get: 19 http://deb.debian.org/debian trixie/main arm64 libuchardet0 arm64 0.0.8-1+b1 [69.0 kB] Get: 20 http://deb.debian.org/debian trixie/main arm64 groff-base arm64 1.23.0-4 [1130 kB] Get: 21 http://deb.debian.org/debian trixie/main arm64 bsdextrautils arm64 2.40.1-8.1 [95.1 kB] Get: 22 http://deb.debian.org/debian trixie/main arm64 libpipeline1 arm64 1.5.7-2 [36.5 kB] Get: 23 http://deb.debian.org/debian trixie/main arm64 man-db arm64 2.12.1-1 [1394 kB] Get: 24 http://deb.debian.org/debian trixie/main arm64 ucf all 3.0043+nmu1 [55.2 kB] Get: 25 http://deb.debian.org/debian trixie/main arm64 m4 arm64 1.4.19-4 [277 kB] Get: 26 http://deb.debian.org/debian trixie/main arm64 autoconf all 2.71-3 [332 kB] Get: 27 http://deb.debian.org/debian trixie/main arm64 autotools-dev all 20220109.1 [51.6 kB] Get: 28 http://deb.debian.org/debian trixie/main arm64 automake all 1:1.16.5-1.3 [823 kB] Get: 29 http://deb.debian.org/debian trixie/main arm64 autopoint all 0.21-14 [496 kB] Get: 30 http://deb.debian.org/debian trixie/main arm64 bison arm64 2:3.8.2+dfsg-1+b1 [1152 kB] Get: 31 http://deb.debian.org/debian trixie/main arm64 libdebhelper-perl all 13.15.3 [88.0 kB] Get: 32 http://deb.debian.org/debian trixie/main arm64 libtool all 2.4.7-7 [517 kB] Get: 33 http://deb.debian.org/debian trixie/main arm64 dh-autoreconf all 20 [17.1 kB] Get: 34 http://deb.debian.org/debian trixie/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 35 http://deb.debian.org/debian trixie/main arm64 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get: 36 http://deb.debian.org/debian trixie/main arm64 dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get: 37 http://deb.debian.org/debian trixie/main arm64 libelf1t64 arm64 0.191-1+b1 [187 kB] Get: 38 http://deb.debian.org/debian trixie/main arm64 dwz arm64 0.15-1+b1 [102 kB] Get: 39 http://deb.debian.org/debian trixie/main arm64 libicu72 arm64 72.1-4+b1 [9224 kB] Get: 40 http://deb.debian.org/debian trixie/main arm64 libxml2 arm64 2.9.14+dfsg-1.3+b3 [624 kB] Get: 41 http://deb.debian.org/debian trixie/main arm64 gettext arm64 0.21-14+b1 [1249 kB] Get: 42 http://deb.debian.org/debian trixie/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 43 http://deb.debian.org/debian trixie/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 44 http://deb.debian.org/debian trixie/main arm64 debhelper all 13.15.3 [901 kB] Get: 45 http://deb.debian.org/debian trixie/main arm64 libncurses6 arm64 6.5-2 [95.7 kB] Get: 46 http://deb.debian.org/debian trixie/main arm64 libncurses-dev arm64 6.5-2 [337 kB] Get: 47 http://deb.debian.org/debian trixie/main arm64 libreadline-dev arm64 8.2-4 [153 kB] Get: 48 http://deb.debian.org/debian trixie/main arm64 libtext-unidecode-perl all 1.30-3 [101 kB] Get: 49 http://deb.debian.org/debian trixie/main arm64 libxml-namespacesupport-perl all 1.12-2 [15.1 kB] Get: 50 http://deb.debian.org/debian trixie/main arm64 libxml-sax-base-perl all 1.09-3 [20.6 kB] Get: 51 http://deb.debian.org/debian trixie/main arm64 libxml-sax-perl all 1.02+dfsg-3 [59.4 kB] Get: 52 http://deb.debian.org/debian trixie/main arm64 libxml-libxml-perl arm64 2.0207+dfsg+really+2.0134-1+b3 [299 kB] Get: 53 http://deb.debian.org/debian trixie/main arm64 tex-common all 6.18 [32.5 kB] Get: 54 http://deb.debian.org/debian trixie/main arm64 texinfo-lib arm64 7.1-3+b1 [213 kB] Get: 55 http://deb.debian.org/debian trixie/main arm64 texinfo all 7.1-3 [1748 kB] Fetched 28.6 MB in 0s (115 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package libpython3.11-minimal:arm64. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19743 files and directories currently installed.) Preparing to unpack .../libpython3.11-minimal_3.11.9-1_arm64.deb ... Unpacking libpython3.11-minimal:arm64 (3.11.9-1) ... Selecting previously unselected package libexpat1:arm64. Preparing to unpack .../libexpat1_2.6.2-1_arm64.deb ... Unpacking libexpat1:arm64 (2.6.2-1) ... Selecting previously unselected package python3.11-minimal. Preparing to unpack .../python3.11-minimal_3.11.9-1_arm64.deb ... Unpacking python3.11-minimal (3.11.9-1) ... Setting up libpython3.11-minimal:arm64 (3.11.9-1) ... Setting up libexpat1:arm64 (2.6.2-1) ... Setting up python3.11-minimal (3.11.9-1) ... Selecting previously unselected package python3-minimal. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20059 files and directories currently installed.) Preparing to unpack .../0-python3-minimal_3.11.8-1_arm64.deb ... Unpacking python3-minimal (3.11.8-1) ... Selecting previously unselected package media-types. Preparing to unpack .../1-media-types_10.1.0_all.deb ... Unpacking media-types (10.1.0) ... Selecting previously unselected package netbase. Preparing to unpack .../2-netbase_6.4_all.deb ... Unpacking netbase (6.4) ... Selecting previously unselected package tzdata. Preparing to unpack .../3-tzdata_2024a-4_all.deb ... Unpacking tzdata (2024a-4) ... Selecting previously unselected package readline-common. Preparing to unpack .../4-readline-common_8.2-4_all.deb ... Unpacking readline-common (8.2-4) ... Selecting previously unselected package libreadline8t64:arm64. Preparing to unpack .../5-libreadline8t64_8.2-4_arm64.deb ... Adding 'diversion of /lib/aarch64-linux-gnu/libhistory.so.8 to /lib/aarch64-linux-gnu/libhistory.so.8.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/aarch64-linux-gnu/libhistory.so.8.2 to /lib/aarch64-linux-gnu/libhistory.so.8.2.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/aarch64-linux-gnu/libreadline.so.8 to /lib/aarch64-linux-gnu/libreadline.so.8.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/aarch64-linux-gnu/libreadline.so.8.2 to /lib/aarch64-linux-gnu/libreadline.so.8.2.usr-is-merged by libreadline8t64' Unpacking libreadline8t64:arm64 (8.2-4) ... Selecting previously unselected package libpython3.11-stdlib:arm64. Preparing to unpack .../6-libpython3.11-stdlib_3.11.9-1_arm64.deb ... Unpacking libpython3.11-stdlib:arm64 (3.11.9-1) ... Selecting previously unselected package python3.11. Preparing to unpack .../7-python3.11_3.11.9-1_arm64.deb ... Unpacking python3.11 (3.11.9-1) ... Selecting previously unselected package libpython3-stdlib:arm64. Preparing to unpack .../8-libpython3-stdlib_3.11.8-1_arm64.deb ... Unpacking libpython3-stdlib:arm64 (3.11.8-1) ... Setting up python3-minimal (3.11.8-1) ... Selecting previously unselected package python3. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 21051 files and directories currently installed.) Preparing to unpack .../00-python3_3.11.8-1_arm64.deb ... Unpacking python3 (3.11.8-1) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../01-sensible-utils_0.0.22_all.deb ... Unpacking sensible-utils (0.0.22) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../02-libmagic-mgc_1%3a5.45-3_arm64.deb ... Unpacking libmagic-mgc (1:5.45-3) ... Selecting previously unselected package libmagic1t64:arm64. Preparing to unpack .../03-libmagic1t64_1%3a5.45-3_arm64.deb ... Unpacking libmagic1t64:arm64 (1:5.45-3) ... Selecting previously unselected package file. Preparing to unpack .../04-file_1%3a5.45-3_arm64.deb ... Unpacking file (1:5.45-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../05-gettext-base_0.21-14+b1_arm64.deb ... Unpacking gettext-base (0.21-14+b1) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../06-libuchardet0_0.0.8-1+b1_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.8-1+b1) ... Selecting previously unselected package groff-base. Preparing to unpack .../07-groff-base_1.23.0-4_arm64.deb ... Unpacking groff-base (1.23.0-4) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../08-bsdextrautils_2.40.1-8.1_arm64.deb ... Unpacking bsdextrautils (2.40.1-8.1) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../09-libpipeline1_1.5.7-2_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.7-2) ... Selecting previously unselected package man-db. Preparing to unpack .../10-man-db_2.12.1-1_arm64.deb ... Unpacking man-db (2.12.1-1) ... Selecting previously unselected package ucf. Preparing to unpack .../11-ucf_3.0043+nmu1_all.deb ... Moving old data out of the way Unpacking ucf (3.0043+nmu1) ... Selecting previously unselected package m4. Preparing to unpack .../12-m4_1.4.19-4_arm64.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../13-autoconf_2.71-3_all.deb ... Unpacking autoconf (2.71-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../14-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../15-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../16-autopoint_0.21-14_all.deb ... Unpacking autopoint (0.21-14) ... Selecting previously unselected package bison. Preparing to unpack .../17-bison_2%3a3.8.2+dfsg-1+b1_arm64.deb ... Unpacking bison (2:3.8.2+dfsg-1+b1) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../18-libdebhelper-perl_13.15.3_all.deb ... Unpacking libdebhelper-perl (13.15.3) ... Selecting previously unselected package libtool. Preparing to unpack .../19-libtool_2.4.7-7_all.deb ... Unpacking libtool (2.4.7-7) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../20-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../21-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../22-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../23-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:arm64. Preparing to unpack .../24-libelf1t64_0.191-1+b1_arm64.deb ... Unpacking libelf1t64:arm64 (0.191-1+b1) ... Selecting previously unselected package dwz. Preparing to unpack .../25-dwz_0.15-1+b1_arm64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libicu72:arm64. Preparing to unpack .../26-libicu72_72.1-4+b1_arm64.deb ... Unpacking libicu72:arm64 (72.1-4+b1) ... Selecting previously unselected package libxml2:arm64. Preparing to unpack .../27-libxml2_2.9.14+dfsg-1.3+b3_arm64.deb ... Unpacking libxml2:arm64 (2.9.14+dfsg-1.3+b3) ... Selecting previously unselected package gettext. Preparing to unpack .../28-gettext_0.21-14+b1_arm64.deb ... Unpacking gettext (0.21-14+b1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../29-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../30-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../31-debhelper_13.15.3_all.deb ... Unpacking debhelper (13.15.3) ... Selecting previously unselected package libncurses6:arm64. Preparing to unpack .../32-libncurses6_6.5-2_arm64.deb ... Unpacking libncurses6:arm64 (6.5-2) ... Selecting previously unselected package libncurses-dev:arm64. Preparing to unpack .../33-libncurses-dev_6.5-2_arm64.deb ... Unpacking libncurses-dev:arm64 (6.5-2) ... Selecting previously unselected package libreadline-dev:arm64. Preparing to unpack .../34-libreadline-dev_8.2-4_arm64.deb ... Unpacking libreadline-dev:arm64 (8.2-4) ... Selecting previously unselected package libtext-unidecode-perl. Preparing to unpack .../35-libtext-unidecode-perl_1.30-3_all.deb ... Unpacking libtext-unidecode-perl (1.30-3) ... Selecting previously unselected package libxml-namespacesupport-perl. Preparing to unpack .../36-libxml-namespacesupport-perl_1.12-2_all.deb ... Unpacking libxml-namespacesupport-perl (1.12-2) ... Selecting previously unselected package libxml-sax-base-perl. Preparing to unpack .../37-libxml-sax-base-perl_1.09-3_all.deb ... Unpacking libxml-sax-base-perl (1.09-3) ... Selecting previously unselected package libxml-sax-perl. Preparing to unpack .../38-libxml-sax-perl_1.02+dfsg-3_all.deb ... Unpacking libxml-sax-perl (1.02+dfsg-3) ... Selecting previously unselected package libxml-libxml-perl. Preparing to unpack .../39-libxml-libxml-perl_2.0207+dfsg+really+2.0134-1+b3_arm64.deb ... Unpacking libxml-libxml-perl (2.0207+dfsg+really+2.0134-1+b3) ... Selecting previously unselected package tex-common. Preparing to unpack .../40-tex-common_6.18_all.deb ... Unpacking tex-common (6.18) ... Selecting previously unselected package texinfo-lib. Preparing to unpack .../41-texinfo-lib_7.1-3+b1_arm64.deb ... Unpacking texinfo-lib (7.1-3+b1) ... Selecting previously unselected package texinfo. Preparing to unpack .../42-texinfo_7.1-3_all.deb ... Unpacking texinfo (7.1-3) ... Setting up media-types (10.1.0) ... Setting up libpipeline1:arm64 (1.5.7-2) ... Setting up libicu72:arm64 (72.1-4+b1) ... Setting up bsdextrautils (2.40.1-8.1) ... Setting up libmagic-mgc (1:5.45-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.15.3) ... Setting up libmagic1t64:arm64 (1:5.45-3) ... Setting up libxml-namespacesupport-perl (1.12-2) ... Setting up gettext-base (0.21-14+b1) ... Setting up m4 (1.4.19-4) ... Setting up file (1:5.45-3) ... Setting up texinfo-lib (7.1-3+b1) ... Setting up libelf1t64:arm64 (0.191-1+b1) ... Setting up tzdata (2024a-4) ... Current default time zone: 'Etc/UTC' Local time is now: Fri Jun 14 23:07:50 UTC 2024. Universal Time is now: Fri Jun 14 23:07:50 UTC 2024. Run 'dpkg-reconfigure tzdata' if you wish to change it. Setting up libxml-sax-base-perl (1.09-3) ... Setting up autotools-dev (20220109.1) ... Setting up libncurses6:arm64 (6.5-2) ... Setting up autopoint (0.21-14) ... Setting up autoconf (2.71-3) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.22) ... Setting up libuchardet0:arm64 (0.0.8-1+b1) ... Setting up bison (2:3.8.2+dfsg-1+b1) ... update-alternatives: using /usr/bin/bison.yacc to provide /usr/bin/yacc (yacc) in auto mode Setting up netbase (6.4) ... Setting up libtext-unidecode-perl (1.30-3) ... Setting up readline-common (8.2-4) ... Setting up libxml2:arm64 (2.9.14+dfsg-1.3+b3) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up libncurses-dev:arm64 (6.5-2) ... Setting up gettext (0.21-14+b1) ... Setting up libtool (2.4.7-7) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up ucf (3.0043+nmu1) ... Setting up libreadline8t64:arm64 (8.2-4) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up groff-base (1.23.0-4) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up libpython3.11-stdlib:arm64 (3.11.9-1) ... Setting up libreadline-dev:arm64 (8.2-4) ... Setting up man-db (2.12.1-1) ... Not building database; man-db/auto-update is not 'true'. Setting up libxml-sax-perl (1.02+dfsg-3) ... update-perl-sax-parsers: Registering Perl SAX parser XML::SAX::PurePerl with priority 10... update-perl-sax-parsers: Updating overall Perl SAX parser modules info file... Creating config file /etc/perl/XML/SAX/ParserDetails.ini with new version Setting up tex-common (6.18) ... update-language: texlive-base not installed and configured, doing nothing! Setting up libxml-libxml-perl (2.0207+dfsg+really+2.0134-1+b3) ... update-perl-sax-parsers: Registering Perl SAX parser XML::LibXML::SAX::Parser with priority 50... update-perl-sax-parsers: Registering Perl SAX parser XML::LibXML::SAX with priority 50... update-perl-sax-parsers: Updating overall Perl SAX parser modules info file... Replacing config file /etc/perl/XML/SAX/ParserDetails.ini with new version Setting up libpython3-stdlib:arm64 (3.11.8-1) ... Setting up python3.11 (3.11.9-1) ... Setting up debhelper (13.15.3) ... Setting up python3 (3.11.8-1) ... Setting up texinfo (7.1-3) ... Processing triggers for libc-bin (2.38-13) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/reproducible-path/units-2.23/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../units_2.23-1_source.changes dpkg-buildpackage: info: source package units dpkg-buildpackage: info: source version 2.23-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Stephen Kitt dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf debian/rules override_dh_auto_configure make[1]: Entering directory '/build/reproducible-path/units-2.23' dh_auto_configure -- --sharedstatedir=/var/lib ./configure --build=aarch64-linux-gnu --prefix=/usr --includedir=\${prefix}/include --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info --sysconfdir=/etc --localstatedir=/var --disable-option-checking --disable-silent-rules --libdir=\${prefix}/lib/aarch64-linux-gnu --runstatedir=/run --disable-maintainer-mode --disable-dependency-tracking --sharedstatedir=/var/lib checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether gcc accepts -g... yes checking for gcc option to enable C11 features... none needed detected non-mac os: linux-gnu checking whether C compiler accepts -fpic... yes checking for an ANSI C-conforming const... yes checking for a BSD-compatible install... /usr/bin/install -c checking for a race-free mkdir -p... /usr/bin/mkdir -p checking for library containing sin... -lm checking for append_history in -lreadline... yes checking for gcc options needed to detect all undeclared functions... none needed checking whether rl_completion_suppress_append is declared... yes checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for string.h... (cached) yes checking for stdlib.h... (cached) yes checking for strchr... yes checking for strspn... yes checking for strtok... yes checking whether TIOCGWINSZ is declared... yes checking for setenv... yes checking for setlocale... yes checking for locale and UTF-8 support... yes checking for isfinite... yes checking for mksinfo... no checking for python3... /usr/bin/python3 configure: creating ./config.status config.status: creating Makefile make[1]: Leaving directory '/build/reproducible-path/units-2.23' dh_auto_build make -j12 make[1]: Entering directory '/build/reproducible-path/units-2.23' gcc -DUNITSFILE=\"/usr/share/units/definitions.units\" -DLOCALEMAP=\"/usr/share/units/locale_map.txt\" -DREADLINE -DHAVE_IOCTL -DSUPPORT_UTF8 -DPACKAGE_NAME=\"GNU\ units\" -DPACKAGE_TARNAME=\"units\" -DPACKAGE_VERSION=\"2.23\" -DPACKAGE_STRING=\"GNU\ units\ 2.23\" -DPACKAGE_BUGREPORT=\"adrianm@gnu.org\" -DPACKAGE_URL=\"https://www.gnu.org/software/units/\" -DHAVE_STDIO_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_STRINGS_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_UNISTD_H=1 -DSTDC_HEADERS=1 -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/units-2.23=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -fpic -I. -c units.c bison parse.y parse.y:275.9-66: warning: unset value: $$ [-Wother] 275 | | BADNUMBER { err = E_BADNUM; CHECK(0); } | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ parse.y:276.9-66: warning: unset value: $$ [-Wother] 276 | | NUMOVERFLOW { err = E_OVERFLOW; CHECK(0); } | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ parse.y:277.9-66: warning: unset value: $$ [-Wother] 277 | | NUMUNDERFLOW { err = E_UNDERFLOW;CHECK(0); } | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ parse.y:278.9-66: warning: unset value: $$ [-Wother] 278 | | MEMERROR { err = E_PARSEMEM; CHECK(0); } ... | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ parse.y:279.9-66: warning: unset value: $$ [-Wother] 279 | | UNITEND { err = E_UNITEND; CHECK(0); } | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ parse.y:280.9-66: warning: unset value: $$ [-Wother] 280 | | LASTUNSET { err = E_LASTUNSET;CHECK(0); } | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ parse.y:281.9-66: warning: unset value: $$ [-Wother] 281 | | FUNCINV UNIT { err = E_NOTAFUNC; CHECK($2);} | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ gcc -DUNITSFILE=\"/usr/share/units/definitions.units\" -DLOCALEMAP=\"/usr/share/units/locale_map.txt\" -DREADLINE -DHAVE_IOCTL -DSUPPORT_UTF8 -DPACKAGE_NAME=\"GNU\ units\" -DPACKAGE_TARNAME=\"units\" -DPACKAGE_VERSION=\"2.23\" -DPACKAGE_STRING=\"GNU\ units\ 2.23\" -DPACKAGE_BUGREPORT=\"adrianm@gnu.org\" -DPACKAGE_URL=\"https://www.gnu.org/software/units/\" -DHAVE_STDIO_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_STRINGS_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_UNISTD_H=1 -DSTDC_HEADERS=1 -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/units-2.23=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -fpic -I. -c getopt.c gcc -DUNITSFILE=\"/usr/share/units/definitions.units\" -DLOCALEMAP=\"/usr/share/units/locale_map.txt\" -DREADLINE -DHAVE_IOCTL -DSUPPORT_UTF8 -DPACKAGE_NAME=\"GNU\ units\" -DPACKAGE_TARNAME=\"units\" -DPACKAGE_VERSION=\"2.23\" -DPACKAGE_STRING=\"GNU\ units\ 2.23\" -DPACKAGE_BUGREPORT=\"adrianm@gnu.org\" -DPACKAGE_URL=\"https://www.gnu.org/software/units/\" -DHAVE_STDIO_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_STRINGS_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_UNISTD_H=1 -DSTDC_HEADERS=1 -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/units-2.23=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -fpic -I. -c getopt1.c ./texi2man units.texinfo > units.man makeinfo ./units.texinfo sed -e "s*output_dir = ''*output_dir='/var/lib/units/'*"\ -e "s@/usr/bin/python@/usr/bin/python3@" \ ./units_cur > units_cur_inst gcc -DUNITSFILE=\"/usr/share/units/definitions.units\" -DLOCALEMAP=\"/usr/share/units/locale_map.txt\" -DREADLINE -DHAVE_IOCTL -DSUPPORT_UTF8 -DPACKAGE_NAME=\"GNU\ units\" -DPACKAGE_TARNAME=\"units\" -DPACKAGE_VERSION=\"2.23\" -DPACKAGE_STRING=\"GNU\ units\ 2.23\" -DPACKAGE_BUGREPORT=\"adrianm@gnu.org\" -DPACKAGE_URL=\"https://www.gnu.org/software/units/\" -DHAVE_STDIO_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_STRINGS_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_UNISTD_H=1 -DSTDC_HEADERS=1 -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/units-2.23=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -fpic -I. -c parse.tab.c sed s!@DATAFILE@!/usr/share/units/definitions.units! ./units.man > units.1 gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/units-2.23=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -fpic -Wl,-z,relro -Wl,-z,now -o units units.o parse.tab.o getopt.o getopt1.o -lreadline -lm make[1]: Leaving directory '/build/reproducible-path/units-2.23' dh_auto_test make -j12 check "TESTSUITEFLAGS=-j12 --verbose" VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/units-2.23' Checking units Units seems to work make[1]: Leaving directory '/build/reproducible-path/units-2.23' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/units/ make -j12 install DESTDIR=/build/reproducible-path/units-2.23/debian/units AM_UPDATE_INFO_DIR=no make[1]: Entering directory '/build/reproducible-path/units-2.23' /usr/bin/mkdir -p /build/reproducible-path/units-2.23/debian/units/usr/share/man/man1 /usr/bin/install -c -m 644 units.1 /build/reproducible-path/units-2.23/debian/units/usr/share/man/man1/`echo units|sed 's,x,x,'`.1 /usr/bin/mkdir -p /build/reproducible-path/units-2.23/debian/units/usr/share/info /usr/bin/install -c -m 644 ./units.info /build/reproducible-path/units-2.23/debian/units/usr/share/info if test -f /build/reproducible-path/units-2.23/debian/units/usr/share/info/dir; then \ if /bin/sh -c 'install-info --version' >/dev/null 2>&1; then \ install-info --dir-file=/build/reproducible-path/units-2.23/debian/units/usr/share/info/dir \ /build/reproducible-path/units-2.23/debian/units/usr/share/info/units.info; \ else true; fi \ else true; fi /usr/bin/mkdir -p /build/reproducible-path/units-2.23/debian/units/usr/share/units/ /build/reproducible-path/units-2.23/debian/units/usr/bin /build/reproducible-path/units-2.23/debian/units/var/lib/units/ /usr/bin/install -c -m 644 ./definitions.units /build/reproducible-path/units-2.23/debian/units/usr/share/units/definitions.units /usr/bin/install -c -m 644 ./elements.units /build/reproducible-path/units-2.23/debian/units/usr/share/units/elements.units rm -f /build/reproducible-path/units-2.23/debian/units/usr/share/units/currency.units /build/reproducible-path/units-2.23/debian/units/usr/share/units/cpi.units /usr/bin/install -c -m 644 ./currency.units /build/reproducible-path/units-2.23/debian/units/var/lib/units/currency.units /usr/bin/install -c -m 644 ./cpi.units /build/reproducible-path/units-2.23/debian/units/var/lib/units/cpi.units if [ /build/reproducible-path/units-2.23/debian/units/var/lib/units/ != /build/reproducible-path/units-2.23/debian/units/usr/share/units/ ];then ln -sf /var/lib/units/currency.units /build/reproducible-path/units-2.23/debian/units/usr/share/units/currency.units;fi if [ /build/reproducible-path/units-2.23/debian/units/var/lib/units/ != /build/reproducible-path/units-2.23/debian/units/usr/share/units/ ];then ln -sf /var/lib/units/cpi.units /build/reproducible-path/units-2.23/debian/units/usr/share/units/cpi.units;fi /usr/bin/install -c -m 644 ./locale_map.txt /build/reproducible-path/units-2.23/debian/units/usr/share/units/locale_map.txt if test yes = yes; then \ /usr/bin/install -c units_cur_inst /build/reproducible-path/units-2.23/debian/units/usr/bin/`echo units_cur|sed 's,x,x,'`;fi if test no = yes; then make install-mks; fi /usr/bin/mkdir -p /build/reproducible-path/units-2.23/debian/units/usr/bin /usr/bin/install -c units /build/reproducible-path/units-2.23/debian/units/usr/bin/`echo units|sed 's,x,x,'` make[1]: Leaving directory '/build/reproducible-path/units-2.23' dh_installdocs dh_installchangelogs dh_installman dh_installmenu dh_lintian dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 from: /lib/ld-linux-aarch64.so.1 dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 to: /lib/ld-linux-aarch64.so.1.usr-is-merged dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libreadline8t64 from: /lib/aarch64-linux-gnu/libreadline.so.8 dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libreadline8t64 to: /lib/aarch64-linux-gnu/libreadline.so.8.usr-is-merged dh_installdeb dh_gencontrol debian/rules override_dh_md5sums make[1]: Entering directory '/build/reproducible-path/units-2.23' dh_md5sums -X var/lib make[1]: Leaving directory '/build/reproducible-path/units-2.23' dh_builddeb dpkg-deb: building package 'units-dbgsym' in '../units-dbgsym_2.23-1_arm64.deb'. dpkg-deb: building package 'units' in '../units_2.23-1_arm64.deb'. dpkg-genbuildinfo --build=binary -O../units_2.23-1_arm64.buildinfo dpkg-genchanges --build=binary -O../units_2.23-1_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: including full source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/70075 and its subdirectories I: Current time: Fri Jun 14 11:08:23 -12 2024 I: pbuilder-time-stamp: 1718406503 Fri Jun 14 23:08:25 UTC 2024 I: 1st build successful. Starting 2nd build on remote node codethink01-arm64.debian.net. Fri Jun 14 23:08:25 UTC 2024 I: Preparing to do remote build '2' on codethink01-arm64.debian.net. Fri Jun 14 23:09:14 UTC 2024 I: Deleting $TMPDIR on codethink01-arm64.debian.net. Fri Jun 14 23:09:15 UTC 2024 I: units_2.23-1_arm64.changes: Format: 1.8 Date: Wed, 28 Feb 2024 11:49:52 +0100 Source: units Binary: units units-dbgsym Architecture: arm64 Version: 2.23-1 Distribution: unstable Urgency: medium Maintainer: Stephen Kitt Changed-By: Stephen Kitt Description: units - converts between different systems of units Changes: units (2.23-1) unstable; urgency=medium . [ Debian Janitor ] * Remove constraints unnecessary since buster (oldstable): + Remove 1 maintscript entries from 1 files. . [ Stephen Kitt ] * New upstream release. * Standards-Version 4.6.2, no change required. Checksums-Sha1: 4b79da8b8d18015e5dcd20c9911aeb3b82b1278b 97896 units-dbgsym_2.23-1_arm64.deb 8e647427f43d4f9878a5235a177244b5775c7d20 5772 units_2.23-1_arm64.buildinfo 7d42e383e3e42fe217010a1d8cbc52f7c8c5f85d 299628 units_2.23-1_arm64.deb Checksums-Sha256: 1596a22ddada08ffbb88ede0e2c9784260d5b92761280966570a5717d8d93463 97896 units-dbgsym_2.23-1_arm64.deb 509abec6d5174af729b6f4fc95d6300d67c858594d36356b90130b9a5a268907 5772 units_2.23-1_arm64.buildinfo 682cd0f7eabd7b8c65640dc6bdd4516d2db28c8bc63af0c4444f5f9b892fef7a 299628 units_2.23-1_arm64.deb Files: 7c4859d16f78ec41da6ff0eea5437ce4 97896 debug optional units-dbgsym_2.23-1_arm64.deb 6fd4236745ef931eebef3d8641002689 5772 utils optional units_2.23-1_arm64.buildinfo 71445e745fa126607309e9fe7eb2d172 299628 utils optional units_2.23-1_arm64.deb Fri Jun 14 23:09:16 UTC 2024 I: diffoscope 271 will be used to compare the two builds: Running as unit: rb-diffoscope-arm64_4-23344.service Warning: program compiled against libxml 212 using older 209 # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.kh4dXm2i/units_2.23-1.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.kh4dXm2i/units_2.23-1.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.kh4dXm2i/units_2.23-1.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.kh4dXm2i/b1/units_2.23-1_arm64.changes /srv/reproducible-results/rbuild-debian/r-b-build.kh4dXm2i/b2/units_2.23-1_arm64.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.392s) 0.392s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.021s) 0.021s 12 calls diffoscope.comparators.binary.FilesystemFile ## specialize (total time: 0.000s) 0.000s 1 call specialize Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 769ms CPU time consumed: 767ms Fri Jun 14 23:09:17 UTC 2024 I: diffoscope 271 found no differences in the changes files, and a .buildinfo file also exists. Fri Jun 14 23:09:17 UTC 2024 I: units from trixie built successfully and reproducibly on arm64. Fri Jun 14 23:09:18 UTC 2024 I: Submitting .buildinfo files to external archives: Fri Jun 14 23:09:18 UTC 2024 I: Submitting 8.0K b1/units_2.23-1_arm64.buildinfo.asc Fri Jun 14 23:09:19 UTC 2024 I: Submitting 8.0K b2/units_2.23-1_arm64.buildinfo.asc Fri Jun 14 23:09:20 UTC 2024 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Fri Jun 14 23:09:20 UTC 2024 I: Done submitting .buildinfo files. Fri Jun 14 23:09:20 UTC 2024 I: Removing signed units_2.23-1_arm64.buildinfo.asc files: removed './b1/units_2.23-1_arm64.buildinfo.asc' removed './b2/units_2.23-1_arm64.buildinfo.asc'