Mon Apr 22 22:24:56 UTC 2024 I: starting to build t-code/trixie/arm64 on jenkins on '2024-04-22 22:24' Mon Apr 22 22:24:56 UTC 2024 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/arm64_3/31691/console.log Mon Apr 22 22:24:56 UTC 2024 I: Downloading source for trixie/t-code=2:2.3.1-10 --2024-04-22 22:24:56-- http://deb.debian.org/debian/pool/main/t/t-code/t-code_2.3.1-10.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 1955 (1.9K) [text/prs.lines.tag] Saving to: ‘t-code_2.3.1-10.dsc’ 0K . 100% 154M=0s 2024-04-22 22:24:56 (154 MB/s) - ‘t-code_2.3.1-10.dsc’ saved [1955/1955] Mon Apr 22 22:24:56 UTC 2024 I: t-code_2.3.1-10.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Format: 3.0 (quilt) Source: t-code Binary: t-code, t-code-common Architecture: all Version: 2:2.3.1-10 Maintainer: Debian QA Group Homepage: http://openlab.jp/tcode/ Standards-Version: 4.5.0 Vcs-Browser: https://salsa.debian.org/debian/t-code Vcs-Git: https://salsa.debian.org/debian/t-code.git Build-Depends: debhelper-compat (= 12) Build-Depends-Indep: emacs-nox | emacs | xemacs21-mule | xemacs21-mule-canna-wnn | emacsen Package-List: t-code deb utils optional arch=all t-code-common deb utils optional arch=all Checksums-Sha1: 7eb55134581b83692ea6deb10c227232d0c8df4d 798831 t-code_2.3.1.orig.tar.gz 9cdf513c5dc7d92b6377380da3401cdd151a9916 74616 t-code_2.3.1-10.debian.tar.xz Checksums-Sha256: e089878b1f56ec63e709fa2f9824165861b8acfc22cf7266e8156d82dc6e0b49 798831 t-code_2.3.1.orig.tar.gz b30e7f44cf9f08182adcf9f0a48517e8fe3aad2a38c27dc63f180889dd6f8a10 74616 t-code_2.3.1-10.debian.tar.xz Files: 1b6c2faa5d4ca7ac1bb60ddbf1967cd0 798831 t-code_2.3.1.orig.tar.gz a24a79f63401190d394be615345bf42b 74616 t-code_2.3.1-10.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQIzBAEBCAAdFiEECynYjkLmt2W42OpQeDlhndQ5Zo4FAmK4+34ACgkQeDlhndQ5 Zo4lNxAAlsqSg5uzkSfcQQnZqkVt/oImn11DAltHlcoGhebAtCGDticUoWpJbXro 9glIxGiTg2v87xl5qLtzuBe3ubA8Jh+bPus9/NBAyuyW4RERdkTFgqOnD35Fu4bj 87UtUDr1yV5jK0JSHa3Q+lU5osOQ26+z2GBpj7nybE1JZwhJ5Py/aEMcDTzbE4sO YSlZUHunQJBWEZCSBkYv6slGY6zEyUstHEdl0AAXMbi9HKRGSeLcJ3L9jQBiJGqM hEen1xH4jOsqDSd2sWNKrbFi1tJ4dpUZ3Ged6wdWg6NYNcIaEpj1xqXCriN30hWd umKlH+Mtwrh2KGPZZ+/wi14oSElBnowfLaaARAHJy+ToeljiCm9bu5FDcjjNsBsQ /AwsCLFNeIomMFSVAqyrIaoB86cm8wEI+QSWwi3CWImEViwp8HrTgAqGN3CY8Kzf 3R7A/4uSiWoeHEg8zR0mjgycAKI/J8o/Cq17jZ9afgRlNmkIDxlI/t8R/AlmnjoW zxW+uJ8+Nkott1L9uoMiWVOEVMLjtzDdv6aVwBJtCcv9J2YuHwV+j3GadghuPCsS 79urLhFQMZ4q6IlmjoUOEIgJnEqG47otLdLIB1UWAlL+y65YQ63EzYSiAA6Jo/Zw wp+DJO84OougEGST5750yay4TJElgNOFWs7d9jEANH39wNI03uM= =5Vyu -----END PGP SIGNATURE----- Mon Apr 22 22:24:56 UTC 2024 I: Checking whether the package is not for us Mon Apr 22 22:24:56 UTC 2024 I: Starting 1st build on remote node codethink01-arm64.debian.net. Mon Apr 22 22:24:56 UTC 2024 I: Preparing to do remote build '1' on codethink01-arm64.debian.net. Mon Apr 22 22:25:42 UTC 2024 I: Deleting $TMPDIR on codethink01-arm64.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Sun May 25 16:47:59 -12 2025 I: pbuilder-time-stamp: 1748234879 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [t-code_2.3.1-10.dsc] I: copying [./t-code_2.3.1.orig.tar.gz] I: copying [./t-code_2.3.1-10.debian.tar.xz] I: Extracting source gpgv: Signature made Mon Jun 27 00:36:14 2022 gpgv: using RSA key 0B29D88E42E6B765B8D8EA507839619DD439668E gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./t-code_2.3.1-10.dsc: no acceptable signature found dpkg-source: info: extracting t-code in t-code-2.3.1 dpkg-source: info: unpacking t-code_2.3.1.orig.tar.gz dpkg-source: info: unpacking t-code_2.3.1-10.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying fix_package_name.diff dpkg-source: info: applying fix_perl_path.diff dpkg-source: info: applying fix_emacs_version.diff dpkg-source: info: applying add_etc_bushu_index2.diff dpkg-source: info: applying add_skkinput3_load_path.diff dpkg-source: info: applying use_string-to-number_instead_of_string-to-int.patch I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/326955/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='arm64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='arm64' IFS=' ' INVOCATION_ID='f02fcd8e350c4803b2e4de3e5719a1ba' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='326955' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.1blfwOiG/pbuilderrc_VKPK --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.1blfwOiG/b1 --logfile b1/build.log t-code_2.3.1-10.dsc' SUDO_GID='109' SUDO_UID='104' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://192.168.101.4:3128' I: uname -a Linux codethink01-arm64 6.1.0-20-cloud-arm64 #1 SMP Debian 6.1.85-1 (2024-04-11) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 May 24 13:38 /bin -> usr/bin I: user script /srv/workspace/pbuilder/326955/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 12), emacs-nox | emacs | xemacs21-mule | xemacs21-mule-canna-wnn | emacsen dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19930 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 12); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on emacs-nox | emacs | xemacs21-mule | xemacs21-mule-canna-wnn | emacsen; however: Package emacs-nox is not installed. Package emacs is not installed. Package xemacs21-mule is not installed. Package xemacs21-mule-canna-wnn is not installed. Package emacsen is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} dbus{a} dbus-bin{a} dbus-daemon{a} dbus-session-bus-common{a} dbus-system-bus-common{a} dbus-user-session{a} dconf-gsettings-backend{a} dconf-service{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dmsetup{a} dwz{a} emacs-bin-common{a} emacs-common{a} emacs-el{a} emacs-nox{a} emacsen-common{a} file{a} gettext{a} gettext-base{a} groff-base{a} install-info{a} intltool-debian{a} libapparmor1{a} libarchive-zip-perl{a} libargon2-1{a} libasound2{a} libasound2-data{a} libcryptsetup12{a} libdbus-1-3{a} libdconf1{a} libdebhelper-perl{a} libdevmapper1.02.1{a} libelf1{a} libexpat1{a} libfdisk1{a} libfile-stripnondeterminism-perl{a} libgcc-14-dev{a} libgccjit0{a} libglib2.0-0{a} libgpm2{a} libicu72{a} libjson-c5{a} libkmod2{a} liblcms2-2{a} libmagic-mgc{a} libmagic1{a} libpam-systemd{a} libpipeline1{a} libproc2-0{a} libsub-override-perl{a} libsystemd-shared{a} libtool{a} libtree-sitter0{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} procps{a} sensible-utils{a} systemd{a} systemd-dev{a} systemd-sysv{a} The following packages are RECOMMENDED but will NOT be installed: alsa-topology-conf alsa-ucm-conf chrony curl libarchive-cpio-perl libglib2.0-data libltdl-dev libmail-sendmail-perl libnss-systemd lynx mailutils ntpsec openntpd psmisc shared-mime-info systemd-timesyncd wget xdg-user-dirs 0 packages upgraded, 70 newly installed, 0 to remove and 0 not upgraded. Need to get 83.1 MB of archives. After unpacking 321 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main arm64 libapparmor1 arm64 3.0.13-2 [41.0 kB] Get: 2 http://deb.debian.org/debian trixie/main arm64 libargon2-1 arm64 0~20190702+dfsg-4+b1 [20.8 kB] Get: 3 http://deb.debian.org/debian trixie/main arm64 dmsetup arm64 2:1.02.196-1+b1 [75.8 kB] Get: 4 http://deb.debian.org/debian trixie/main arm64 libdevmapper1.02.1 arm64 2:1.02.196-1+b1 [117 kB] Get: 5 http://deb.debian.org/debian trixie/main arm64 libjson-c5 arm64 0.17-1+b1 [43.5 kB] Get: 6 http://deb.debian.org/debian trixie/main arm64 libcryptsetup12 arm64 2:2.6.1-6+b1 [206 kB] Get: 7 http://deb.debian.org/debian trixie/main arm64 libfdisk1 arm64 2.39.3-6 [192 kB] Get: 8 http://deb.debian.org/debian trixie/main arm64 libkmod2 arm64 31+20240202-2 [56.0 kB] Get: 9 http://deb.debian.org/debian trixie/main arm64 libsystemd-shared arm64 255.4-1 [1720 kB] Get: 10 http://deb.debian.org/debian trixie/main arm64 systemd-dev all 255.4-1 [59.7 kB] Get: 11 http://deb.debian.org/debian trixie/main arm64 systemd arm64 255.4-1 [3286 kB] Get: 12 http://deb.debian.org/debian trixie/main arm64 systemd-sysv arm64 255.4-1 [50.4 kB] Get: 13 http://deb.debian.org/debian trixie/main arm64 libdbus-1-3 arm64 1.14.10-4 [196 kB] Get: 14 http://deb.debian.org/debian trixie/main arm64 dbus-bin arm64 1.14.10-4 [105 kB] Get: 15 http://deb.debian.org/debian trixie/main arm64 dbus-session-bus-common all 1.14.10-4 [79.0 kB] Get: 16 http://deb.debian.org/debian trixie/main arm64 libexpat1 arm64 2.6.2-1 [88.7 kB] Get: 17 http://deb.debian.org/debian trixie/main arm64 dbus-daemon arm64 1.14.10-4 [177 kB] Get: 18 http://deb.debian.org/debian trixie/main arm64 dbus-system-bus-common all 1.14.10-4 [80.1 kB] Get: 19 http://deb.debian.org/debian trixie/main arm64 dbus arm64 1.14.10-4 [97.2 kB] Get: 20 http://deb.debian.org/debian trixie/main arm64 install-info arm64 7.1-3 [160 kB] Get: 21 http://deb.debian.org/debian trixie/main arm64 libproc2-0 arm64 2:4.0.4-4 [61.7 kB] Get: 22 http://deb.debian.org/debian trixie/main arm64 procps arm64 2:4.0.4-4 [869 kB] Get: 23 http://deb.debian.org/debian trixie/main arm64 sensible-utils all 0.0.22 [22.4 kB] Get: 24 http://deb.debian.org/debian trixie/main arm64 libmagic-mgc arm64 1:5.45-2+b1 [314 kB] Get: 25 http://deb.debian.org/debian trixie/main arm64 libmagic1 arm64 1:5.45-2+b1 [100 kB] Get: 26 http://deb.debian.org/debian trixie/main arm64 file arm64 1:5.45-2+b1 [43.2 kB] Get: 27 http://deb.debian.org/debian trixie/main arm64 gettext-base arm64 0.21-14+b1 [160 kB] Get: 28 http://deb.debian.org/debian trixie/main arm64 libuchardet0 arm64 0.0.8-1+b1 [69.0 kB] Get: 29 http://deb.debian.org/debian trixie/main arm64 groff-base arm64 1.23.0-3 [1127 kB] Get: 30 http://deb.debian.org/debian trixie/main arm64 libpam-systemd arm64 255.4-1 [242 kB] Get: 31 http://deb.debian.org/debian trixie/main arm64 bsdextrautils arm64 2.39.3-6 [90.0 kB] Get: 32 http://deb.debian.org/debian trixie/main arm64 libpipeline1 arm64 1.5.7-2 [36.5 kB] Get: 33 http://deb.debian.org/debian trixie/main arm64 man-db arm64 2.12.0-3 [1385 kB] Get: 34 http://deb.debian.org/debian trixie/main arm64 m4 arm64 1.4.19-4 [277 kB] Get: 35 http://deb.debian.org/debian trixie/main arm64 autoconf all 2.71-3 [332 kB] Get: 36 http://deb.debian.org/debian trixie/main arm64 autotools-dev all 20220109.1 [51.6 kB] Get: 37 http://deb.debian.org/debian trixie/main arm64 automake all 1:1.16.5-1.3 [823 kB] Get: 38 http://deb.debian.org/debian trixie/main arm64 autopoint all 0.21-14 [496 kB] Get: 39 http://deb.debian.org/debian trixie/main arm64 dbus-user-session arm64 1.14.10-4 [78.9 kB] Get: 40 http://deb.debian.org/debian trixie/main arm64 libglib2.0-0 arm64 2.78.4-1 [1361 kB] Get: 41 http://deb.debian.org/debian trixie/main arm64 libdconf1 arm64 0.40.0-4+b1 [40.2 kB] Get: 42 http://deb.debian.org/debian trixie/main arm64 dconf-service arm64 0.40.0-4+b1 [31.0 kB] Get: 43 http://deb.debian.org/debian trixie/main arm64 dconf-gsettings-backend arm64 0.40.0-4+b1 [27.2 kB] Get: 44 http://deb.debian.org/debian trixie/main arm64 libdebhelper-perl all 13.15.3 [88.0 kB] Get: 45 http://deb.debian.org/debian trixie/main arm64 libtool all 2.4.7-7 [517 kB] Get: 46 http://deb.debian.org/debian trixie/main arm64 dh-autoreconf all 20 [17.1 kB] Get: 47 http://deb.debian.org/debian trixie/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 48 http://deb.debian.org/debian trixie/main arm64 libsub-override-perl all 0.10-1 [10.6 kB] Get: 49 http://deb.debian.org/debian trixie/main arm64 libfile-stripnondeterminism-perl all 1.13.1-1 [19.4 kB] Get: 50 http://deb.debian.org/debian trixie/main arm64 dh-strip-nondeterminism all 1.13.1-1 [8620 B] Get: 51 http://deb.debian.org/debian trixie/main arm64 libelf1 arm64 0.190-1+b1 [175 kB] Get: 52 http://deb.debian.org/debian trixie/main arm64 dwz arm64 0.15-1 [101 kB] Get: 53 http://deb.debian.org/debian trixie/main arm64 libicu72 arm64 72.1-4+b1 [9224 kB] Get: 54 http://deb.debian.org/debian trixie/main arm64 libxml2 arm64 2.9.14+dfsg-1.3+b2 [624 kB] Get: 55 http://deb.debian.org/debian trixie/main arm64 gettext arm64 0.21-14+b1 [1249 kB] Get: 56 http://deb.debian.org/debian trixie/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 57 http://deb.debian.org/debian trixie/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 58 http://deb.debian.org/debian trixie/main arm64 debhelper all 13.15.3 [901 kB] Get: 59 http://deb.debian.org/debian trixie/main arm64 emacs-el all 1:29.2+1-2 [18.8 MB] Get: 60 http://deb.debian.org/debian trixie/main arm64 emacsen-common all 3.0.5 [12.3 kB] Get: 61 http://deb.debian.org/debian trixie/main arm64 emacs-common all 1:29.2+1-2 [15.2 MB] Get: 62 http://deb.debian.org/debian trixie/main arm64 emacs-bin-common arm64 1:29.2+1-2 [90.9 kB] Get: 63 http://deb.debian.org/debian trixie/main arm64 libasound2-data all 1.2.10-3 [20.7 kB] Get: 64 http://deb.debian.org/debian trixie/main arm64 libasound2 arm64 1.2.10-3 [333 kB] Get: 65 http://deb.debian.org/debian trixie/main arm64 libgcc-14-dev arm64 14-20240201-3 [2305 kB] Get: 66 http://deb.debian.org/debian trixie/main arm64 libgccjit0 arm64 14-20240201-3 [11.3 MB] Get: 67 http://deb.debian.org/debian trixie/main arm64 libgpm2 arm64 1.20.7-11 [14.3 kB] Get: 68 http://deb.debian.org/debian trixie/main arm64 liblcms2-2 arm64 2.14-2+b1 [144 kB] Get: 69 http://deb.debian.org/debian trixie/main arm64 libtree-sitter0 arm64 0.20.8-2+b1 [76.2 kB] Get: 70 http://deb.debian.org/debian trixie/main arm64 emacs-nox arm64 1:29.2+1-2 [6504 kB] Fetched 83.1 MB in 0s (207 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package libapparmor1:arm64. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19930 files and directories currently installed.) Preparing to unpack .../00-libapparmor1_3.0.13-2_arm64.deb ... Unpacking libapparmor1:arm64 (3.0.13-2) ... Selecting previously unselected package libargon2-1:arm64. Preparing to unpack .../01-libargon2-1_0~20190702+dfsg-4+b1_arm64.deb ... Unpacking libargon2-1:arm64 (0~20190702+dfsg-4+b1) ... Selecting previously unselected package dmsetup. Preparing to unpack .../02-dmsetup_2%3a1.02.196-1+b1_arm64.deb ... Unpacking dmsetup (2:1.02.196-1+b1) ... Selecting previously unselected package libdevmapper1.02.1:arm64. Preparing to unpack .../03-libdevmapper1.02.1_2%3a1.02.196-1+b1_arm64.deb ... Unpacking libdevmapper1.02.1:arm64 (2:1.02.196-1+b1) ... Selecting previously unselected package libjson-c5:arm64. Preparing to unpack .../04-libjson-c5_0.17-1+b1_arm64.deb ... Unpacking libjson-c5:arm64 (0.17-1+b1) ... Selecting previously unselected package libcryptsetup12:arm64. Preparing to unpack .../05-libcryptsetup12_2%3a2.6.1-6+b1_arm64.deb ... Unpacking libcryptsetup12:arm64 (2:2.6.1-6+b1) ... Selecting previously unselected package libfdisk1:arm64. Preparing to unpack .../06-libfdisk1_2.39.3-6_arm64.deb ... Unpacking libfdisk1:arm64 (2.39.3-6) ... Selecting previously unselected package libkmod2:arm64. Preparing to unpack .../07-libkmod2_31+20240202-2_arm64.deb ... Unpacking libkmod2:arm64 (31+20240202-2) ... Selecting previously unselected package libsystemd-shared:arm64. Preparing to unpack .../08-libsystemd-shared_255.4-1_arm64.deb ... Unpacking libsystemd-shared:arm64 (255.4-1) ... Selecting previously unselected package systemd-dev. Preparing to unpack .../09-systemd-dev_255.4-1_all.deb ... Unpacking systemd-dev (255.4-1) ... Selecting previously unselected package systemd. Preparing to unpack .../10-systemd_255.4-1_arm64.deb ... Unpacking systemd (255.4-1) ... Setting up libapparmor1:arm64 (3.0.13-2) ... Setting up libargon2-1:arm64 (0~20190702+dfsg-4+b1) ... Setting up libjson-c5:arm64 (0.17-1+b1) ... Setting up libfdisk1:arm64 (2.39.3-6) ... Setting up libkmod2:arm64 (31+20240202-2) ... Setting up libsystemd-shared:arm64 (255.4-1) ... Setting up systemd-dev (255.4-1) ... Setting up libdevmapper1.02.1:arm64 (2:1.02.196-1+b1) ... Setting up libcryptsetup12:arm64 (2:2.6.1-6+b1) ... Setting up systemd (255.4-1) ... Created symlink /etc/systemd/system/getty.target.wants/getty@tty1.service -> /usr/lib/systemd/system/getty@.service. Created symlink /etc/systemd/system/multi-user.target.wants/remote-fs.target -> /usr/lib/systemd/system/remote-fs.target. Created symlink /etc/systemd/system/sysinit.target.wants/systemd-pstore.service -> /usr/lib/systemd/system/systemd-pstore.service. Initializing machine ID from random generator. Creating group 'systemd-journal' with GID 999. Creating group 'systemd-network' with GID 998. Creating user 'systemd-network' (systemd Network Management) with UID 998 and GID 998. Setting up dmsetup (2:1.02.196-1+b1) ... Selecting previously unselected package systemd-sysv. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 21023 files and directories currently installed.) Preparing to unpack .../0-systemd-sysv_255.4-1_arm64.deb ... Unpacking systemd-sysv (255.4-1) ... Selecting previously unselected package libdbus-1-3:arm64. Preparing to unpack .../1-libdbus-1-3_1.14.10-4_arm64.deb ... Unpacking libdbus-1-3:arm64 (1.14.10-4) ... Selecting previously unselected package dbus-bin. Preparing to unpack .../2-dbus-bin_1.14.10-4_arm64.deb ... Unpacking dbus-bin (1.14.10-4) ... Selecting previously unselected package dbus-session-bus-common. Preparing to unpack .../3-dbus-session-bus-common_1.14.10-4_all.deb ... Unpacking dbus-session-bus-common (1.14.10-4) ... Selecting previously unselected package libexpat1:arm64. Preparing to unpack .../4-libexpat1_2.6.2-1_arm64.deb ... Unpacking libexpat1:arm64 (2.6.2-1) ... Selecting previously unselected package dbus-daemon. Preparing to unpack .../5-dbus-daemon_1.14.10-4_arm64.deb ... Unpacking dbus-daemon (1.14.10-4) ... Selecting previously unselected package dbus-system-bus-common. Preparing to unpack .../6-dbus-system-bus-common_1.14.10-4_all.deb ... Unpacking dbus-system-bus-common (1.14.10-4) ... Selecting previously unselected package dbus. Preparing to unpack .../7-dbus_1.14.10-4_arm64.deb ... Unpacking dbus (1.14.10-4) ... Selecting previously unselected package install-info. Preparing to unpack .../8-install-info_7.1-3_arm64.deb ... Unpacking install-info (7.1-3) ... Setting up install-info (7.1-3) ... Selecting previously unselected package libproc2-0:arm64. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 21138 files and directories currently installed.) Preparing to unpack .../00-libproc2-0_2%3a4.0.4-4_arm64.deb ... Unpacking libproc2-0:arm64 (2:4.0.4-4) ... Selecting previously unselected package procps. Preparing to unpack .../01-procps_2%3a4.0.4-4_arm64.deb ... Unpacking procps (2:4.0.4-4) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../02-sensible-utils_0.0.22_all.deb ... Unpacking sensible-utils (0.0.22) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../03-libmagic-mgc_1%3a5.45-2+b1_arm64.deb ... Unpacking libmagic-mgc (1:5.45-2+b1) ... Selecting previously unselected package libmagic1:arm64. Preparing to unpack .../04-libmagic1_1%3a5.45-2+b1_arm64.deb ... Unpacking libmagic1:arm64 (1:5.45-2+b1) ... Selecting previously unselected package file. Preparing to unpack .../05-file_1%3a5.45-2+b1_arm64.deb ... Unpacking file (1:5.45-2+b1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../06-gettext-base_0.21-14+b1_arm64.deb ... Unpacking gettext-base (0.21-14+b1) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../07-libuchardet0_0.0.8-1+b1_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.8-1+b1) ... Selecting previously unselected package groff-base. Preparing to unpack .../08-groff-base_1.23.0-3_arm64.deb ... Unpacking groff-base (1.23.0-3) ... Selecting previously unselected package libpam-systemd:arm64. Preparing to unpack .../09-libpam-systemd_255.4-1_arm64.deb ... Unpacking libpam-systemd:arm64 (255.4-1) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../10-bsdextrautils_2.39.3-6_arm64.deb ... Unpacking bsdextrautils (2.39.3-6) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../11-libpipeline1_1.5.7-2_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.7-2) ... Selecting previously unselected package man-db. Preparing to unpack .../12-man-db_2.12.0-3_arm64.deb ... Unpacking man-db (2.12.0-3) ... Selecting previously unselected package m4. Preparing to unpack .../13-m4_1.4.19-4_arm64.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../14-autoconf_2.71-3_all.deb ... Unpacking autoconf (2.71-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../15-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../16-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../17-autopoint_0.21-14_all.deb ... Unpacking autopoint (0.21-14) ... Selecting previously unselected package dbus-user-session. Preparing to unpack .../18-dbus-user-session_1.14.10-4_arm64.deb ... Unpacking dbus-user-session (1.14.10-4) ... Selecting previously unselected package libglib2.0-0:arm64. Preparing to unpack .../19-libglib2.0-0_2.78.4-1_arm64.deb ... Unpacking libglib2.0-0:arm64 (2.78.4-1) ... Selecting previously unselected package libdconf1:arm64. Preparing to unpack .../20-libdconf1_0.40.0-4+b1_arm64.deb ... Unpacking libdconf1:arm64 (0.40.0-4+b1) ... Selecting previously unselected package dconf-service. Preparing to unpack .../21-dconf-service_0.40.0-4+b1_arm64.deb ... Unpacking dconf-service (0.40.0-4+b1) ... Selecting previously unselected package dconf-gsettings-backend:arm64. Preparing to unpack .../22-dconf-gsettings-backend_0.40.0-4+b1_arm64.deb ... Unpacking dconf-gsettings-backend:arm64 (0.40.0-4+b1) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../23-libdebhelper-perl_13.15.3_all.deb ... Unpacking libdebhelper-perl (13.15.3) ... Selecting previously unselected package libtool. Preparing to unpack .../24-libtool_2.4.7-7_all.deb ... Unpacking libtool (2.4.7-7) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../25-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../26-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libsub-override-perl. Preparing to unpack .../27-libsub-override-perl_0.10-1_all.deb ... Unpacking libsub-override-perl (0.10-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../28-libfile-stripnondeterminism-perl_1.13.1-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.13.1-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../29-dh-strip-nondeterminism_1.13.1-1_all.deb ... Unpacking dh-strip-nondeterminism (1.13.1-1) ... Selecting previously unselected package libelf1:arm64. Preparing to unpack .../30-libelf1_0.190-1+b1_arm64.deb ... Unpacking libelf1:arm64 (0.190-1+b1) ... Selecting previously unselected package dwz. Preparing to unpack .../31-dwz_0.15-1_arm64.deb ... Unpacking dwz (0.15-1) ... Selecting previously unselected package libicu72:arm64. Preparing to unpack .../32-libicu72_72.1-4+b1_arm64.deb ... Unpacking libicu72:arm64 (72.1-4+b1) ... Selecting previously unselected package libxml2:arm64. Preparing to unpack .../33-libxml2_2.9.14+dfsg-1.3+b2_arm64.deb ... Unpacking libxml2:arm64 (2.9.14+dfsg-1.3+b2) ... Selecting previously unselected package gettext. Preparing to unpack .../34-gettext_0.21-14+b1_arm64.deb ... Unpacking gettext (0.21-14+b1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../35-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../36-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../37-debhelper_13.15.3_all.deb ... Unpacking debhelper (13.15.3) ... Selecting previously unselected package emacs-el. Preparing to unpack .../38-emacs-el_1%3a29.2+1-2_all.deb ... Unpacking emacs-el (1:29.2+1-2) ... Selecting previously unselected package emacsen-common. Preparing to unpack .../39-emacsen-common_3.0.5_all.deb ... Unpacking emacsen-common (3.0.5) ... Selecting previously unselected package emacs-common. Preparing to unpack .../40-emacs-common_1%3a29.2+1-2_all.deb ... Unpacking emacs-common (1:29.2+1-2) ... Selecting previously unselected package emacs-bin-common. Preparing to unpack .../41-emacs-bin-common_1%3a29.2+1-2_arm64.deb ... Unpacking emacs-bin-common (1:29.2+1-2) ... Selecting previously unselected package libasound2-data. Preparing to unpack .../42-libasound2-data_1.2.10-3_all.deb ... Unpacking libasound2-data (1.2.10-3) ... Selecting previously unselected package libasound2:arm64. Preparing to unpack .../43-libasound2_1.2.10-3_arm64.deb ... Unpacking libasound2:arm64 (1.2.10-3) ... Selecting previously unselected package libgcc-14-dev:arm64. Preparing to unpack .../44-libgcc-14-dev_14-20240201-3_arm64.deb ... Unpacking libgcc-14-dev:arm64 (14-20240201-3) ... Selecting previously unselected package libgccjit0:arm64. Preparing to unpack .../45-libgccjit0_14-20240201-3_arm64.deb ... Unpacking libgccjit0:arm64 (14-20240201-3) ... Selecting previously unselected package libgpm2:arm64. Preparing to unpack .../46-libgpm2_1.20.7-11_arm64.deb ... Unpacking libgpm2:arm64 (1.20.7-11) ... Selecting previously unselected package liblcms2-2:arm64. Preparing to unpack .../47-liblcms2-2_2.14-2+b1_arm64.deb ... Unpacking liblcms2-2:arm64 (2.14-2+b1) ... Selecting previously unselected package libtree-sitter0:arm64. Preparing to unpack .../48-libtree-sitter0_0.20.8-2+b1_arm64.deb ... Unpacking libtree-sitter0:arm64 (0.20.8-2+b1) ... Selecting previously unselected package emacs-nox. Preparing to unpack .../49-emacs-nox_1%3a29.2+1-2_arm64.deb ... Unpacking emacs-nox (1:29.2+1-2) ... Setting up libexpat1:arm64 (2.6.2-1) ... Setting up libpipeline1:arm64 (1.5.7-2) ... Setting up liblcms2-2:arm64 (2.14-2+b1) ... Setting up systemd-sysv (255.4-1) ... Setting up libgpm2:arm64 (1.20.7-11) ... Setting up libicu72:arm64 (72.1-4+b1) ... Setting up bsdextrautils (2.39.3-6) ... Setting up libmagic-mgc (1:5.45-2+b1) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libglib2.0-0:arm64 (2.78.4-1) ... Setting up libdebhelper-perl (13.15.3) ... Setting up libmagic1:arm64 (1:5.45-2+b1) ... Setting up gettext-base (0.21-14+b1) ... Setting up m4 (1.4.19-4) ... Setting up file (1:5.45-2+b1) ... Setting up libdconf1:arm64 (0.40.0-4+b1) ... Setting up libasound2-data (1.2.10-3) ... Setting up autotools-dev (20220109.1) ... Setting up libtree-sitter0:arm64 (0.20.8-2+b1) ... Setting up emacsen-common (3.0.5) ... Setting up libdbus-1-3:arm64 (1.14.10-4) ... Setting up libproc2-0:arm64 (2:4.0.4-4) ... Setting up autopoint (0.21-14) ... Setting up autoconf (2.71-3) ... Setting up sensible-utils (0.0.22) ... Setting up dbus-session-bus-common (1.14.10-4) ... Setting up libuchardet0:arm64 (0.0.8-1+b1) ... Setting up procps (2:4.0.4-4) ... Setting up libasound2:arm64 (1.2.10-3) ... Setting up libsub-override-perl (0.10-1) ... Setting up libgcc-14-dev:arm64 (14-20240201-3) ... Setting up dbus-system-bus-common (1.14.10-4) ... Setting up libgccjit0:arm64 (14-20240201-3) ... Setting up libelf1:arm64 (0.190-1+b1) ... Setting up libxml2:arm64 (2.9.14+dfsg-1.3+b2) ... Setting up dbus-bin (1.14.10-4) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.13.1-1) ... Setting up gettext (0.21-14+b1) ... Setting up libtool (2.4.7-7) ... Setting up dbus-daemon (1.14.10-4) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dbus (1.14.10-4) ... Running in chroot, ignoring request. invoke-rc.d: policy-rc.d denied execution of start. Setting up dh-strip-nondeterminism (1.13.1-1) ... Setting up dwz (0.15-1) ... Setting up groff-base (1.23.0-3) ... Setting up libpam-systemd:arm64 (255.4-1) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.12.0-3) ... Not building database; man-db/auto-update is not 'true'. Created symlink /etc/systemd/system/timers.target.wants/man-db.timer -> /usr/lib/systemd/system/man-db.timer. Setting up dbus-user-session (1.14.10-4) ... Setting up debhelper (13.15.3) ... Setting up dconf-service (0.40.0-4+b1) ... Setting up dconf-gsettings-backend:arm64 (0.40.0-4+b1) ... Setting up emacs-el (1:29.2+1-2) ... Setting up emacs-common (1:29.2+1-2) ... Setting up emacs-bin-common (1:29.2+1-2) ... update-alternatives: using /usr/bin/ctags.emacs to provide /usr/bin/ctags (ctags) in auto mode update-alternatives: using /usr/bin/ebrowse.emacs to provide /usr/bin/ebrowse (ebrowse) in auto mode update-alternatives: using /usr/bin/etags.emacs to provide /usr/bin/etags (etags) in auto mode Setting up emacs-nox (1:29.2+1-2) ... update-alternatives: using /usr/bin/emacs-nox to provide /usr/bin/emacs (emacs) in auto mode update-alternatives: using /usr/bin/emacs to provide /usr/bin/editor (editor) in auto mode update-alternatives: using /usr/bin/emacsclient.emacs to provide /usr/bin/emacsclient (emacsclient) in auto mode Install emacsen-common for emacs emacsen-common: Handling install of emacsen flavor emacs Processing triggers for libc-bin (2.37-15) ... Processing triggers for install-info (7.1-3) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/reproducible-path/t-code-2.3.1/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../t-code_2.3.1-10_source.changes dpkg-buildpackage: info: source package t-code dpkg-buildpackage: info: source version 2:2.3.1-10 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by HIGUCHI Daisuke (VDR dai) dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 debian/rules clean dh clean --no-parallel debian/rules override_dh_auto_clean make[1]: Entering directory '/build/reproducible-path/t-code-2.3.1' dh_auto_clean rm -f \ /build/reproducible-path/t-code-2.3.1/config.log \ /build/reproducible-path/t-code-2.3.1/aclocal.m4 \ /build/reproducible-path/t-code-2.3.1/compile \ /build/reproducible-path/t-code-2.3.1/etc/bushu.expand \ /build/reproducible-path/t-code-2.3.1/etc/bushu.index \ /build/reproducible-path/t-code-2.3.1/mazegaki/mazegaki.dic \ /build/reproducible-path/t-code-2.3.1/etc/bushu.index2 \ /build/reproducible-path/t-code-2.3.1/skkinput3/load-path.el make[1]: Leaving directory '/build/reproducible-path/t-code-2.3.1' dh_autoreconf_clean -O--no-parallel dh_clean -O--no-parallel debian/rules binary dh binary --no-parallel dh_update_autotools_config -O--no-parallel dh_autoreconf -O--no-parallel autoreconf: warning: autoconf input should be named 'configure.ac', not 'configure.in' aclocal: warning: autoconf input should be named 'configure.ac', not 'configure.in' acinclude.m4:4: warning: underquoted definition of AC_EMACS_LISP acinclude.m4:4: run info Automake 'Extending aclocal' acinclude.m4:4: or see https://www.gnu.org/software/automake/manual/automake.html#Extending-aclocal configure.in:2: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. ./lib/autoconf/general.m4:2434: AC_DIAGNOSE is expanded from... aclocal.m4:429: AM_INIT_AUTOMAKE is expanded from... configure.in:2: the top level configure.in:76: warning: AC_OUTPUT should be used without arguments. configure.in:76: You should run autoupdate. automake: warning: autoconf input should be named 'configure.ac', not 'configure.in' configure.in:2: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. For more info, see: configure.in:2: https://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_005fINIT_005fAUTOMAKE-invocation configure.in:17: installing './compile' doc/Makefile.am:7: warning: suffix '.texinfo' for Texinfo files is discouraged; use '.texi' instead automake: warning: autoconf input should be named 'configure.ac', not 'configure.in' debian/rules override_dh_auto_configure make[1]: Entering directory '/build/reproducible-path/t-code-2.3.1' dh_auto_configure -- \ --libexecdir=\${exec_prefix}/lib/t-code \ --with-lispdir=\${prefix}/share/emacs/site-lisp/t-code ./configure --build=aarch64-linux-gnu --prefix=/usr --includedir=\${prefix}/include --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info --sysconfdir=/etc --localstatedir=/var --disable-option-checking --disable-silent-rules --libdir=\${prefix}/lib/aarch64-linux-gnu --runstatedir=/run --disable-maintainer-mode --disable-dependency-tracking --libexecdir=\${exec_prefix}/lib/t-code --with-lispdir=\${prefix}/share/emacs/site-lisp/t-code checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a race-free mkdir -p... /usr/bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether gcc accepts -g... yes checking for gcc option to enable C11 features... none needed checking whether gcc understands -c and -o together... yes checking whether make supports the include directive... yes (GNU style) checking dependency style of gcc... none checking for emacs... emacs checking where .elc files should go... ${prefix}/share/emacs/site-lisp/t-code checking for makeinfo... ${SHELL} '/build/reproducible-path/t-code-2.3.1/missing' makeinfo checking for install-info... install-info checking for emacs version... 29.2 checking for emacs type... mule1 checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating etc/Makefile config.status: creating doc/Makefile config.status: creating kinput2/Makefile config.status: creating lisp/Makefile config.status: creating lisp/tc-pre-base config.status: creating mazegaki/Makefile config.status: creating bushu-util/Makefile config.status: creating skkinput3/Makefile config.status: creating skkinput3/tcinput config.status: WARNING: skkinput3/tcinput contains a reference to the variable `datarootdir' which seems to be undefined. Please make sure it is defined config.status: executing depfiles commands " " "Sucessfully configured Emacs/tc2" "Emacs/tc2 will be compiled with: emacs" "Lisp files will be installed into: ${prefix}/share/emacs/site-lisp/t-code" " " "To finish building Emacs/tc2 type \'make\' now." "To install Emacs/tc2 type \'make install\'." make[1]: Leaving directory '/build/reproducible-path/t-code-2.3.1' dh_auto_build -O--no-parallel make -j1 make[1]: Entering directory '/build/reproducible-path/t-code-2.3.1' Making all in lisp make[2]: Entering directory '/build/reproducible-path/t-code-2.3.1/lisp' /bin/sh add-site-info tc-pre-base tc-pre.el \ "/usr/share/t-code/" /bin/sh add-site-info tc-pre-base tc-pre.el \ "/usr/share/t-code/" emacs -q -no-site-file -batch -l ./make-elc \ tc-setup.el tc.el tc-help.el tc-complete.el tc-jiscode.el tc-bushu.el tc-mazegaki.el tc-util.el tc-tbl.el tutc-tbl.el eelll.el tc-inst.el tc-stat.el tc-ja-alnum.el tc-is18.el 2> compile.log make[2]: Leaving directory '/build/reproducible-path/t-code-2.3.1/lisp' Making all in doc make[2]: Entering directory '/build/reproducible-path/t-code-2.3.1/doc' make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '/build/reproducible-path/t-code-2.3.1/doc' Making all in etc make[2]: Entering directory '/build/reproducible-path/t-code-2.3.1/etc' *** compiling bushu dictionary *** *** this may take a few minutes *** emacs -q -no-site-file -batch -l ./mk-bdic Loading /build/reproducible-path/t-code-2.3.1/lisp/tc-pre-base... Loading /build/reproducible-path/t-code-2.3.1/lisp/tc-setup.el (source)... Loading tc... making bushu dictionary... making bushu dictionary...done make[2]: Leaving directory '/build/reproducible-path/t-code-2.3.1/etc' Making all in kinput2 make[2]: Entering directory '/build/reproducible-path/t-code-2.3.1/kinput2' make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '/build/reproducible-path/t-code-2.3.1/kinput2' Making all in mazegaki make[2]: Entering directory '/build/reproducible-path/t-code-2.3.1/mazegaki' /bin/rm -f mazegaki.dic emacs -q -no-site-file -batch -l ./mk-mzdic Loading /build/reproducible-path/t-code-2.3.1/lisp/tc-pre-base... Loading tc-setup... reading certain files reading uncertain files parsing kihon-yomi kihon-yomi: 0/32806 kihon-yomi: 1024/32806 kihon-yomi: 2048/32806 kihon-yomi: 3072/32806 kihon-yomi: 4096/32806 kihon-yomi: 5120/32806 kihon-yomi: 6144/32806 kihon-yomi: 7168/32806 kihon-yomi: 8192/32806 kihon-yomi: 9216/32806 kihon-yomi: 10240/32806 kihon-yomi: 11264/32806 kihon-yomi: 12288/32806 kihon-yomi: 13312/32806 kihon-yomi: 14336/32806 kihon-yomi: 15360/32806 kihon-yomi: 16384/32806 kihon-yomi: 17408/32806 kihon-yomi: 18432/32806 kihon-yomi: 19456/32806 kihon-yomi: 20480/32806 kihon-yomi: 21504/32806 kihon-yomi: 22528/32806 kihon-yomi: 23552/32806 kihon-yomi: 24576/32806 kihon-yomi: 25600/32806 kihon-yomi: 26624/32806 kihon-yomi: 27648/32806 kihon-yomi: 28672/32806 kihon-yomi: 29696/32806 kihon-yomi: 30720/32806 kihon-yomi: 31744/32806 kihon-yomi: 32768/32806 sorting kanji reading additional dics sorting key inserting data make[2]: Leaving directory '/build/reproducible-path/t-code-2.3.1/mazegaki' Making all in bushu-util make[2]: Entering directory '/build/reproducible-path/t-code-2.3.1/bushu-util' make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '/build/reproducible-path/t-code-2.3.1/bushu-util' Making all in skkinput3 make[2]: Entering directory '/build/reproducible-path/t-code-2.3.1/skkinput3' echo "(setq load-path (nconc load-path (cons \"/usr/share/emacs/site-lisp/t-code\" nil)))" \ > load-path.el make[2]: Leaving directory '/build/reproducible-path/t-code-2.3.1/skkinput3' make[2]: Entering directory '/build/reproducible-path/t-code-2.3.1' make[2]: Nothing to be done for 'all-am'. make[2]: Leaving directory '/build/reproducible-path/t-code-2.3.1' make[1]: Leaving directory '/build/reproducible-path/t-code-2.3.1' dh_auto_test -O--no-parallel make -j1 check "TESTSUITEFLAGS=-j1 --verbose" VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/t-code-2.3.1' Making check in lisp make[2]: Entering directory '/build/reproducible-path/t-code-2.3.1/lisp' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/build/reproducible-path/t-code-2.3.1/lisp' Making check in doc make[2]: Entering directory '/build/reproducible-path/t-code-2.3.1/doc' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/build/reproducible-path/t-code-2.3.1/doc' Making check in etc make[2]: Entering directory '/build/reproducible-path/t-code-2.3.1/etc' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/build/reproducible-path/t-code-2.3.1/etc' Making check in kinput2 make[2]: Entering directory '/build/reproducible-path/t-code-2.3.1/kinput2' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/build/reproducible-path/t-code-2.3.1/kinput2' Making check in mazegaki make[2]: Entering directory '/build/reproducible-path/t-code-2.3.1/mazegaki' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/build/reproducible-path/t-code-2.3.1/mazegaki' Making check in bushu-util make[2]: Entering directory '/build/reproducible-path/t-code-2.3.1/bushu-util' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/build/reproducible-path/t-code-2.3.1/bushu-util' Making check in skkinput3 make[2]: Entering directory '/build/reproducible-path/t-code-2.3.1/skkinput3' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/build/reproducible-path/t-code-2.3.1/skkinput3' make[2]: Entering directory '/build/reproducible-path/t-code-2.3.1' make[2]: Nothing to be done for 'check-am'. make[2]: Leaving directory '/build/reproducible-path/t-code-2.3.1' make[1]: Leaving directory '/build/reproducible-path/t-code-2.3.1' create-stamp debian/debhelper-build-stamp dh_testroot -O--no-parallel dh_prep -O--no-parallel dh_auto_install -O--no-parallel make -j1 install DESTDIR=/build/reproducible-path/t-code-2.3.1/debian/tmp AM_UPDATE_INFO_DIR=no make[1]: Entering directory '/build/reproducible-path/t-code-2.3.1' Making install in lisp make[2]: Entering directory '/build/reproducible-path/t-code-2.3.1/lisp' make[3]: Entering directory '/build/reproducible-path/t-code-2.3.1/lisp' make[3]: Nothing to be done for 'install-exec-am'. /usr/bin/mkdir -p '/build/reproducible-path/t-code-2.3.1/debian/tmp/usr/share/emacs/site-lisp/t-code' /usr/bin/install -c -m 644 'tc-sysdep.el' '/build/reproducible-path/t-code-2.3.1/debian/tmp/usr/share/emacs/site-lisp/t-code/tc-sysdep.el' /usr/bin/install -c -m 644 'tc-setup.el' '/build/reproducible-path/t-code-2.3.1/debian/tmp/usr/share/emacs/site-lisp/t-code/tc-setup.el' /usr/bin/install -c -m 644 'tc-setup.elc' '/build/reproducible-path/t-code-2.3.1/debian/tmp/usr/share/emacs/site-lisp/t-code/tc-setup.elc' /usr/bin/install -c -m 644 'tc.el' '/build/reproducible-path/t-code-2.3.1/debian/tmp/usr/share/emacs/site-lisp/t-code/tc.el' /usr/bin/install -c -m 644 'tc.elc' '/build/reproducible-path/t-code-2.3.1/debian/tmp/usr/share/emacs/site-lisp/t-code/tc.elc' /usr/bin/install -c -m 644 'tc-help.el' '/build/reproducible-path/t-code-2.3.1/debian/tmp/usr/share/emacs/site-lisp/t-code/tc-help.el' /usr/bin/install -c -m 644 'tc-help.elc' '/build/reproducible-path/t-code-2.3.1/debian/tmp/usr/share/emacs/site-lisp/t-code/tc-help.elc' /usr/bin/install -c -m 644 'tc-complete.el' '/build/reproducible-path/t-code-2.3.1/debian/tmp/usr/share/emacs/site-lisp/t-code/tc-complete.el' /usr/bin/install -c -m 644 'tc-complete.elc' '/build/reproducible-path/t-code-2.3.1/debian/tmp/usr/share/emacs/site-lisp/t-code/tc-complete.elc' /usr/bin/install -c -m 644 'tc-jiscode.el' '/build/reproducible-path/t-code-2.3.1/debian/tmp/usr/share/emacs/site-lisp/t-code/tc-jiscode.el' /usr/bin/install -c -m 644 'tc-jiscode.elc' '/build/reproducible-path/t-code-2.3.1/debian/tmp/usr/share/emacs/site-lisp/t-code/tc-jiscode.elc' /usr/bin/install -c -m 644 'tc-bushu.el' '/build/reproducible-path/t-code-2.3.1/debian/tmp/usr/share/emacs/site-lisp/t-code/tc-bushu.el' /usr/bin/install -c -m 644 'tc-bushu.elc' '/build/reproducible-path/t-code-2.3.1/debian/tmp/usr/share/emacs/site-lisp/t-code/tc-bushu.elc' /usr/bin/install -c -m 644 'tc-mazegaki.el' '/build/reproducible-path/t-code-2.3.1/debian/tmp/usr/share/emacs/site-lisp/t-code/tc-mazegaki.el' /usr/bin/install -c -m 644 'tc-mazegaki.elc' '/build/reproducible-path/t-code-2.3.1/debian/tmp/usr/share/emacs/site-lisp/t-code/tc-mazegaki.elc' /usr/bin/install -c -m 644 'tc-util.el' '/build/reproducible-path/t-code-2.3.1/debian/tmp/usr/share/emacs/site-lisp/t-code/tc-util.el' /usr/bin/install -c -m 644 'tc-util.elc' '/build/reproducible-path/t-code-2.3.1/debian/tmp/usr/share/emacs/site-lisp/t-code/tc-util.elc' /usr/bin/install -c -m 644 'tc-tbl.el' '/build/reproducible-path/t-code-2.3.1/debian/tmp/usr/share/emacs/site-lisp/t-code/tc-tbl.el' /usr/bin/install -c -m 644 'tc-tbl.elc' '/build/reproducible-path/t-code-2.3.1/debian/tmp/usr/share/emacs/site-lisp/t-code/tc-tbl.elc' /usr/bin/install -c -m 644 'tutc-tbl.el' '/build/reproducible-path/t-code-2.3.1/debian/tmp/usr/share/emacs/site-lisp/t-code/tutc-tbl.el' /usr/bin/install -c -m 644 'tutc-tbl.elc' '/build/reproducible-path/t-code-2.3.1/debian/tmp/usr/share/emacs/site-lisp/t-code/tutc-tbl.elc' /usr/bin/install -c -m 644 'eelll.el' '/build/reproducible-path/t-code-2.3.1/debian/tmp/usr/share/emacs/site-lisp/t-code/eelll.el' /usr/bin/install -c -m 644 'eelll.elc' '/build/reproducible-path/t-code-2.3.1/debian/tmp/usr/share/emacs/site-lisp/t-code/eelll.elc' /usr/bin/install -c -m 644 'tc-inst.el' '/build/reproducible-path/t-code-2.3.1/debian/tmp/usr/share/emacs/site-lisp/t-code/tc-inst.el' /usr/bin/install -c -m 644 'tc-inst.elc' '/build/reproducible-path/t-code-2.3.1/debian/tmp/usr/share/emacs/site-lisp/t-code/tc-inst.elc' /usr/bin/install -c -m 644 'tc-stat.el' '/build/reproducible-path/t-code-2.3.1/debian/tmp/usr/share/emacs/site-lisp/t-code/tc-stat.el' /usr/bin/install -c -m 644 'tc-stat.elc' '/build/reproducible-path/t-code-2.3.1/debian/tmp/usr/share/emacs/site-lisp/t-code/tc-stat.elc' /usr/bin/install -c -m 644 'tc-ja-alnum.el' '/build/reproducible-path/t-code-2.3.1/debian/tmp/usr/share/emacs/site-lisp/t-code/tc-ja-alnum.el' /usr/bin/install -c -m 644 'tc-ja-alnum.elc' '/build/reproducible-path/t-code-2.3.1/debian/tmp/usr/share/emacs/site-lisp/t-code/tc-ja-alnum.elc' /usr/bin/install -c -m 644 'tc-is18.el' '/build/reproducible-path/t-code-2.3.1/debian/tmp/usr/share/emacs/site-lisp/t-code/tc-is18.el' /usr/bin/install -c -m 644 'tc-is18.elc' '/build/reproducible-path/t-code-2.3.1/debian/tmp/usr/share/emacs/site-lisp/t-code/tc-is18.elc' /usr/bin/install -c -m 644 'tc-is19.el' '/build/reproducible-path/t-code-2.3.1/debian/tmp/usr/share/emacs/site-lisp/t-code/tc-is19.el' /usr/bin/install -c -m 644 'tc-is20.el' '/build/reproducible-path/t-code-2.3.1/debian/tmp/usr/share/emacs/site-lisp/t-code/tc-is20.el' /usr/bin/install -c -m 644 'tc-bitmap.el' '/build/reproducible-path/t-code-2.3.1/debian/tmp/usr/share/emacs/site-lisp/t-code/tc-bitmap.el' /usr/bin/install -c -m 644 'tc-image.el' '/build/reproducible-path/t-code-2.3.1/debian/tmp/usr/share/emacs/site-lisp/t-code/tc-image.el' /usr/bin/install -c -m 644 'tc-mkmzdic.el' '/build/reproducible-path/t-code-2.3.1/debian/tmp/usr/share/emacs/site-lisp/t-code/tc-mkmzdic.el' /usr/bin/install -c -m 644 'tc-pre.el' '/build/reproducible-path/t-code-2.3.1/debian/tmp/usr/share/emacs/site-lisp/t-code/tc-pre.el' make[3]: Leaving directory '/build/reproducible-path/t-code-2.3.1/lisp' make[2]: Leaving directory '/build/reproducible-path/t-code-2.3.1/lisp' Making install in doc make[2]: Entering directory '/build/reproducible-path/t-code-2.3.1/doc' make[3]: Entering directory '/build/reproducible-path/t-code-2.3.1/doc' make[3]: Nothing to be done for 'install-exec-am'. /usr/bin/mkdir -p '/build/reproducible-path/t-code-2.3.1/debian/tmp/usr/share/info' /usr/bin/install -c -m 644 ./tc.info '/build/reproducible-path/t-code-2.3.1/debian/tmp/usr/share/info' /usr/bin/mkdir -p '/build/reproducible-path/t-code-2.3.1/debian/tmp/usr/share/t-code' /usr/bin/install -c -m 644 manual.pdf '/build/reproducible-path/t-code-2.3.1/debian/tmp/usr/share/t-code' make[3]: Leaving directory '/build/reproducible-path/t-code-2.3.1/doc' make[2]: Leaving directory '/build/reproducible-path/t-code-2.3.1/doc' Making install in etc make[2]: Entering directory '/build/reproducible-path/t-code-2.3.1/etc' make[3]: Entering directory '/build/reproducible-path/t-code-2.3.1/etc' make[3]: Nothing to be done for 'install-exec-am'. /usr/bin/mkdir -p '/build/reproducible-path/t-code-2.3.1/debian/tmp/usr/share/t-code' /usr/bin/install -c -m 644 EELLLTXT EELLLTXT.tut bushu.rev symbol.rev tc-bitmap-8x16 bushu.expand bushu.index2 '/build/reproducible-path/t-code-2.3.1/debian/tmp/usr/share/t-code' make[3]: Leaving directory '/build/reproducible-path/t-code-2.3.1/etc' make[2]: Leaving directory '/build/reproducible-path/t-code-2.3.1/etc' Making install in kinput2 make[2]: Entering directory '/build/reproducible-path/t-code-2.3.1/kinput2' make[3]: Entering directory '/build/reproducible-path/t-code-2.3.1/kinput2' make[3]: Nothing to be done for 'install-exec-am'. /usr/bin/mkdir -p '/build/reproducible-path/t-code-2.3.1/debian/tmp/usr/share/t-code' /usr/bin/install -c -m 644 ccdef.tcode tc-ki2.el '/build/reproducible-path/t-code-2.3.1/debian/tmp/usr/share/t-code' make[3]: Leaving directory '/build/reproducible-path/t-code-2.3.1/kinput2' make[2]: Leaving directory '/build/reproducible-path/t-code-2.3.1/kinput2' Making install in mazegaki make[2]: Entering directory '/build/reproducible-path/t-code-2.3.1/mazegaki' make[3]: Entering directory '/build/reproducible-path/t-code-2.3.1/mazegaki' make[3]: Nothing to be done for 'install-exec-am'. /usr/bin/mkdir -p '/build/reproducible-path/t-code-2.3.1/debian/tmp/usr/share/t-code' /usr/bin/install -c -m 644 pd_kihon.yom greece.maz jukujiku.maz t225.dat t300.dat t400.dat t450.dat t575.dat t675.dat t900.dat t1200.dat t1353.dat itaiji.maz mazegaki.dic mkcertain.pl '/build/reproducible-path/t-code-2.3.1/debian/tmp/usr/share/t-code' make[3]: Leaving directory '/build/reproducible-path/t-code-2.3.1/mazegaki' make[2]: Leaving directory '/build/reproducible-path/t-code-2.3.1/mazegaki' Making install in bushu-util make[2]: Entering directory '/build/reproducible-path/t-code-2.3.1/bushu-util' make[3]: Entering directory '/build/reproducible-path/t-code-2.3.1/bushu-util' make[3]: Nothing to be done for 'install-exec-am'. /usr/bin/mkdir -p '/build/reproducible-path/t-code-2.3.1/debian/tmp/usr/share/t-code' /usr/bin/install -c -m 644 bushu2canna order.txt parts.txt tchars.txt tcode.txt want.txt where '/build/reproducible-path/t-code-2.3.1/debian/tmp/usr/share/t-code' make[3]: Leaving directory '/build/reproducible-path/t-code-2.3.1/bushu-util' make[2]: Leaving directory '/build/reproducible-path/t-code-2.3.1/bushu-util' Making install in skkinput3 make[2]: Entering directory '/build/reproducible-path/t-code-2.3.1/skkinput3' make[3]: Entering directory '/build/reproducible-path/t-code-2.3.1/skkinput3' /usr/bin/mkdir -p '/build/reproducible-path/t-code-2.3.1/debian/tmp/usr/bin' /usr/bin/install -c tcinput '/build/reproducible-path/t-code-2.3.1/debian/tmp/usr/bin' /usr/bin/mkdir -p '/build/reproducible-path/t-code-2.3.1/debian/tmp/usr/share/t-code' /usr/bin/install -c -m 644 init.el skk-startup.el tc-skki.el load-path.el '/build/reproducible-path/t-code-2.3.1/debian/tmp/usr/share/t-code' make[3]: Leaving directory '/build/reproducible-path/t-code-2.3.1/skkinput3' make[2]: Leaving directory '/build/reproducible-path/t-code-2.3.1/skkinput3' make[2]: Entering directory '/build/reproducible-path/t-code-2.3.1' make[3]: Entering directory '/build/reproducible-path/t-code-2.3.1' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/build/reproducible-path/t-code-2.3.1' make[2]: Leaving directory '/build/reproducible-path/t-code-2.3.1' make[1]: Leaving directory '/build/reproducible-path/t-code-2.3.1' debian/rules override_dh_install make[1]: Entering directory '/build/reproducible-path/t-code-2.3.1' /usr/bin/make -C bushu-util DESTDIR=/build/reproducible-path/t-code-2.3.1/debian/tmp install make[2]: Entering directory '/build/reproducible-path/t-code-2.3.1/bushu-util' make[3]: Entering directory '/build/reproducible-path/t-code-2.3.1/bushu-util' make[3]: Nothing to be done for 'install-exec-am'. /usr/bin/mkdir -p '/build/reproducible-path/t-code-2.3.1/debian/tmp/usr/share/t-code' /usr/bin/install -c -m 644 bushu2canna order.txt parts.txt tchars.txt tcode.txt want.txt where '/build/reproducible-path/t-code-2.3.1/debian/tmp/usr/share/t-code' make[3]: Leaving directory '/build/reproducible-path/t-code-2.3.1/bushu-util' make[2]: Leaving directory '/build/reproducible-path/t-code-2.3.1/bushu-util' /usr/bin/make -C doc DESTDIR=/build/reproducible-path/t-code-2.3.1/debian/tmp install make[2]: Entering directory '/build/reproducible-path/t-code-2.3.1/doc' make[3]: Entering directory '/build/reproducible-path/t-code-2.3.1/doc' make[3]: Nothing to be done for 'install-exec-am'. /usr/bin/mkdir -p '/build/reproducible-path/t-code-2.3.1/debian/tmp/usr/share/info' /usr/bin/install -c -m 644 ./tc.info '/build/reproducible-path/t-code-2.3.1/debian/tmp/usr/share/info' install-info --info-dir='/build/reproducible-path/t-code-2.3.1/debian/tmp/usr/share/info' '/build/reproducible-path/t-code-2.3.1/debian/tmp/usr/share/info/tc.info' /usr/bin/mkdir -p '/build/reproducible-path/t-code-2.3.1/debian/tmp/usr/share/t-code' /usr/bin/install -c -m 644 manual.pdf '/build/reproducible-path/t-code-2.3.1/debian/tmp/usr/share/t-code' make[3]: Leaving directory '/build/reproducible-path/t-code-2.3.1/doc' make[2]: Leaving directory '/build/reproducible-path/t-code-2.3.1/doc' /usr/bin/make -C etc DESTDIR=/build/reproducible-path/t-code-2.3.1/debian/tmp install make[2]: Entering directory '/build/reproducible-path/t-code-2.3.1/etc' make[3]: Entering directory '/build/reproducible-path/t-code-2.3.1/etc' make[3]: Nothing to be done for 'install-exec-am'. /usr/bin/mkdir -p '/build/reproducible-path/t-code-2.3.1/debian/tmp/usr/share/t-code' /usr/bin/install -c -m 644 EELLLTXT EELLLTXT.tut bushu.rev symbol.rev tc-bitmap-8x16 bushu.expand bushu.index2 '/build/reproducible-path/t-code-2.3.1/debian/tmp/usr/share/t-code' make[3]: Leaving directory '/build/reproducible-path/t-code-2.3.1/etc' make[2]: Leaving directory '/build/reproducible-path/t-code-2.3.1/etc' /usr/bin/make -C kinput2 DESTDIR=/build/reproducible-path/t-code-2.3.1/debian/tmp install make[2]: Entering directory '/build/reproducible-path/t-code-2.3.1/kinput2' make[3]: Entering directory '/build/reproducible-path/t-code-2.3.1/kinput2' make[3]: Nothing to be done for 'install-exec-am'. /usr/bin/mkdir -p '/build/reproducible-path/t-code-2.3.1/debian/tmp/usr/share/t-code' /usr/bin/install -c -m 644 ccdef.tcode tc-ki2.el '/build/reproducible-path/t-code-2.3.1/debian/tmp/usr/share/t-code' make[3]: Leaving directory '/build/reproducible-path/t-code-2.3.1/kinput2' make[2]: Leaving directory '/build/reproducible-path/t-code-2.3.1/kinput2' /usr/bin/make -C mazegaki DESTDIR=/build/reproducible-path/t-code-2.3.1/debian/tmp install make[2]: Entering directory '/build/reproducible-path/t-code-2.3.1/mazegaki' make[3]: Entering directory '/build/reproducible-path/t-code-2.3.1/mazegaki' make[3]: Nothing to be done for 'install-exec-am'. /usr/bin/mkdir -p '/build/reproducible-path/t-code-2.3.1/debian/tmp/usr/share/t-code' /usr/bin/install -c -m 644 pd_kihon.yom greece.maz jukujiku.maz t225.dat t300.dat t400.dat t450.dat t575.dat t675.dat t900.dat t1200.dat t1353.dat itaiji.maz mazegaki.dic mkcertain.pl '/build/reproducible-path/t-code-2.3.1/debian/tmp/usr/share/t-code' make[3]: Leaving directory '/build/reproducible-path/t-code-2.3.1/mazegaki' make[2]: Leaving directory '/build/reproducible-path/t-code-2.3.1/mazegaki' /usr/bin/make -C skkinput3 DESTDIR=/build/reproducible-path/t-code-2.3.1/debian/tmp install make[2]: Entering directory '/build/reproducible-path/t-code-2.3.1/skkinput3' make[3]: Entering directory '/build/reproducible-path/t-code-2.3.1/skkinput3' /usr/bin/mkdir -p '/build/reproducible-path/t-code-2.3.1/debian/tmp/usr/bin' /usr/bin/install -c tcinput '/build/reproducible-path/t-code-2.3.1/debian/tmp/usr/bin' /usr/bin/mkdir -p '/build/reproducible-path/t-code-2.3.1/debian/tmp/usr/share/t-code' /usr/bin/install -c -m 644 init.el skk-startup.el tc-skki.el load-path.el '/build/reproducible-path/t-code-2.3.1/debian/tmp/usr/share/t-code' make[3]: Leaving directory '/build/reproducible-path/t-code-2.3.1/skkinput3' make[2]: Leaving directory '/build/reproducible-path/t-code-2.3.1/skkinput3' cd /build/reproducible-path/t-code-2.3.1/debian/tmp/usr/share/t-code && \ chmod +x bushu2canna where mkcertain.pl install -m 644 lisp/*.el \ /build/reproducible-path/t-code-2.3.1/debian/tmp/usr/share/emacs/site-lisp/t-code rm -f /build/reproducible-path/t-code-2.3.1/debian/tmp/usr/share/t-code/manual.pdf dh_install make[1]: Leaving directory '/build/reproducible-path/t-code-2.3.1' debian/rules override_dh_installdocs make[1]: Entering directory '/build/reproducible-path/t-code-2.3.1' mkdir -p /build/reproducible-path/t-code-2.3.1/debian/t-code-common/usr/share/doc/t-code-common/kinput2 for i in README tc-ki2.el ccdef.tcode; do \ cp -pr /build/reproducible-path/t-code-2.3.1/kinput2/$i \ /build/reproducible-path/t-code-2.3.1/debian/t-code-common/usr/share/doc/t-code-common/kinput2; \ done mkdir -p /build/reproducible-path/t-code-2.3.1/debian/t-code-common/usr/share/doc/t-code-common/skkinput3 cp -pr /build/reproducible-path/t-code-2.3.1/skkinput3/tcinput \ /build/reproducible-path/t-code-2.3.1/debian/t-code-common/usr/share/doc/t-code-common/skkinput3 dh_installdocs make[1]: Leaving directory '/build/reproducible-path/t-code-2.3.1' debian/rules override_dh_installchangelogs make[1]: Entering directory '/build/reproducible-path/t-code-2.3.1' dh_installchangelogs ChangeLog ChangeLog.old make[1]: Leaving directory '/build/reproducible-path/t-code-2.3.1' dh_installexamples -O--no-parallel dh_installemacsen -O--no-parallel dh_installinfo -O--no-parallel dh_installinit -O--no-parallel dh_installsystemduser -O--no-parallel dh_perl -O--no-parallel debian/rules override_dh_link make[1]: Entering directory '/build/reproducible-path/t-code-2.3.1' rm -rf /build/reproducible-path/t-code-2.3.1/debian/t-code/usr/share/doc/t-code dh_link -pt-code usr/share/doc/t-code-common usr/share/doc/t-code make[1]: Leaving directory '/build/reproducible-path/t-code-2.3.1' dh_strip_nondeterminism -O--no-parallel dh_compress -O--no-parallel dh_fixperms -O--no-parallel dh_missing -O--no-parallel dh_missing: warning: usr/bin/tcinput exists in debian/tmp but is not installed to anywhere dh_missing: warning: usr/share/emacs/site-lisp/t-code/eelll.elc exists in debian/tmp but is not installed to anywhere dh_missing: warning: usr/share/emacs/site-lisp/t-code/tc-bushu.elc exists in debian/tmp but is not installed to anywhere dh_missing: warning: usr/share/emacs/site-lisp/t-code/tc-complete.elc exists in debian/tmp but is not installed to anywhere dh_missing: warning: usr/share/emacs/site-lisp/t-code/tc-help.elc exists in debian/tmp but is not installed to anywhere dh_missing: warning: usr/share/emacs/site-lisp/t-code/tc-inst.elc exists in debian/tmp but is not installed to anywhere dh_missing: warning: usr/share/emacs/site-lisp/t-code/tc-is18.elc exists in debian/tmp but is not installed to anywhere dh_missing: warning: usr/share/emacs/site-lisp/t-code/tc-ja-alnum.elc exists in debian/tmp but is not installed to anywhere dh_missing: warning: usr/share/emacs/site-lisp/t-code/tc-jiscode.elc exists in debian/tmp but is not installed to anywhere dh_missing: warning: usr/share/emacs/site-lisp/t-code/tc-mazegaki.elc exists in debian/tmp but is not installed to anywhere dh_missing: warning: usr/share/emacs/site-lisp/t-code/tc-setup.elc exists in debian/tmp but is not installed to anywhere dh_missing: warning: usr/share/emacs/site-lisp/t-code/tc-stat.elc exists in debian/tmp but is not installed to anywhere dh_missing: warning: usr/share/emacs/site-lisp/t-code/tc-tbl.elc exists in debian/tmp but is not installed to anywhere dh_missing: warning: usr/share/emacs/site-lisp/t-code/tc-util.elc exists in debian/tmp but is not installed to anywhere dh_missing: warning: usr/share/emacs/site-lisp/t-code/tc.elc exists in debian/tmp but is not installed to anywhere dh_missing: warning: usr/share/emacs/site-lisp/t-code/tutc-tbl.elc exists in debian/tmp but is not installed to anywhere dh_missing: warning: usr/share/info/dir exists in debian/tmp but is not installed to anywhere (related file: "usr/share/info/dir") dh_missing: warning: usr/share/info/tc.info exists in debian/tmp but is not installed to anywhere (related file: "doc/tc.info") While detecting missing files, dh_missing noted some files with a similar name to those that were missing. This warning /might/ be resolved by replacing references to the missing files with the similarly named ones that dh_missing found - assuming the content is identical. As an example, you might want to replace: * usr/share/info/dir with: * usr/share/info/dir in a file in debian/ or as argument to one of the dh_* tools called from debian/rules. (Note it is possible the paths are not used verbatim but instead directories containing or globs matching them are used instead) Alternatively, add the missing file to debian/not-installed if it cannot and should not be used. The following debhelper tools have reported what they installed (with files per package) * dh_install: t-code (22), t-code-common (1) * dh_installdocs: t-code (0), t-code-common (6) * dh_installexamples: t-code (0), t-code-common (1) * dh_installinfo: t-code (2), t-code-common (1) If the missing files are installed by another tool, please file a bug against it. When filing the report, if the tool is not part of debhelper itself, please reference the "Logging helpers and dh_missing" section from the "PROGRAMMING" guide for debhelper (10.6.3+). (in the debhelper package: /usr/share/doc/debhelper/PROGRAMMING.md.gz) Be sure to test with dpkg-buildpackage -A/-B as the results may vary when only a subset is built If the omission is intentional or no other helper can take care of this consider adding the paths to debian/not-installed. dh_installdeb -O--no-parallel dh_gencontrol -O--no-parallel dpkg-gencontrol: warning: package t-code-common: substitution variable ${perl:Depends} unused, but is defined dh_md5sums -O--no-parallel dh_builddeb -O--no-parallel dpkg-deb: building package 't-code' in '../t-code_2.3.1-10_all.deb'. dpkg-deb: building package 't-code-common' in '../t-code-common_2.3.1-10_all.deb'. dpkg-genbuildinfo --build=binary -O../t-code_2.3.1-10_arm64.buildinfo dpkg-genchanges --build=binary -O../t-code_2.3.1-10_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/326955 and its subdirectories I: Current time: Sun May 25 16:48:40 -12 2025 I: pbuilder-time-stamp: 1748234920 Mon Apr 22 22:25:43 UTC 2024 I: 1st build successful. Starting 2nd build on remote node codethink04-arm64.debian.net. Mon Apr 22 22:25:43 UTC 2024 I: Preparing to do remote build '2' on codethink04-arm64.debian.net. Mon Apr 22 22:26:33 UTC 2024 I: Deleting $TMPDIR on codethink04-arm64.debian.net. Mon Apr 22 22:26:34 UTC 2024 I: t-code_2.3.1-10_arm64.changes: Format: 1.8 Date: Mon, 27 Jun 2022 09:33:09 +0900 Source: t-code Binary: t-code t-code-common Architecture: all Version: 2:2.3.1-10 Distribution: unstable Urgency: medium Maintainer: Debian QA Group Changed-By: HIGUCHI Daisuke (VDR dai) Description: t-code - Japanese direct input method environment for emacsen t-code-common - Japanese direct input method environment - common files Changes: t-code (2:2.3.1-10) unstable; urgency=medium . * QA upload. . [ Debian Janitor ] * Remove constraints unnecessary since buster . [ HIGUCHI Daisuke (VDR dai) ] * Orphan package. Checksums-Sha1: 2d547581a2a8edde2cd29854f37495f20a3d9ec4 886076 t-code-common_2.3.1-10_all.deb 70566203db36b551d73ed775feff44a5d489f495 118704 t-code_2.3.1-10_all.deb 1b6f7049a7fdf5616e653f0ba7734cb0830438e0 6977 t-code_2.3.1-10_arm64.buildinfo Checksums-Sha256: 5fa3c03239e2cdc5c79f04d21bee05e85979c04681665f5f10f8fbf604ae86b2 886076 t-code-common_2.3.1-10_all.deb a43ba9cd11adf7b4f65d6dd23d5e1d1d9e816965f8af4f1f023bb4025b6b2454 118704 t-code_2.3.1-10_all.deb ada6d5c1a224289c344f6cce77f9a52cbcb1f29a98f45524503c0ba528ad4e2c 6977 t-code_2.3.1-10_arm64.buildinfo Files: 9846506b375148fb0fed8b197bc6c187 886076 utils optional t-code-common_2.3.1-10_all.deb 61dad496dbb9ca5bcfee6ae5103a060f 118704 utils optional t-code_2.3.1-10_all.deb d3a509b2fd5aaf3b2aff195f07a5ee0e 6977 utils optional t-code_2.3.1-10_arm64.buildinfo Mon Apr 22 22:26:35 UTC 2024 I: diffoscope 265 will be used to compare the two builds: Running as unit: rb-diffoscope-arm64_3-31691.service # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.1blfwOiG/t-code_2.3.1-10.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.1blfwOiG/t-code_2.3.1-10.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.1blfwOiG/t-code_2.3.1-10.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.1blfwOiG/b1/t-code_2.3.1-10_arm64.changes /srv/reproducible-results/rbuild-debian/r-b-build.1blfwOiG/b2/t-code_2.3.1-10_arm64.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.322s) 0.322s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.025s) 0.025s 12 calls diffoscope.comparators.binary.FilesystemFile ## specialize (total time: 0.000s) 0.000s 1 call specialize Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 600ms CPU time consumed: 601ms Mon Apr 22 22:26:36 UTC 2024 I: diffoscope 265 found no differences in the changes files, and a .buildinfo file also exists. Mon Apr 22 22:26:36 UTC 2024 I: t-code from trixie built successfully and reproducibly on arm64. Mon Apr 22 22:26:37 UTC 2024 I: Submitting .buildinfo files to external archives: Mon Apr 22 22:26:37 UTC 2024 I: Submitting 8.0K b1/t-code_2.3.1-10_arm64.buildinfo.asc Mon Apr 22 22:26:38 UTC 2024 I: Submitting 8.0K b2/t-code_2.3.1-10_arm64.buildinfo.asc Mon Apr 22 22:26:39 UTC 2024 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Mon Apr 22 22:26:39 UTC 2024 I: Done submitting .buildinfo files. Mon Apr 22 22:26:39 UTC 2024 I: Removing signed t-code_2.3.1-10_arm64.buildinfo.asc files: removed './b1/t-code_2.3.1-10_arm64.buildinfo.asc' removed './b2/t-code_2.3.1-10_arm64.buildinfo.asc'