Sun May 12 12:45:59 UTC 2024 I: starting to build libproc-daemon-perl/trixie/arm64 on jenkins on '2024-05-12 12:45' Sun May 12 12:45:59 UTC 2024 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/arm64_19/17881/console.log Sun May 12 12:45:59 UTC 2024 I: Downloading source for trixie/libproc-daemon-perl=0.23-2 --2024-05-12 12:45:59-- http://deb.debian.org/debian/pool/main/libp/libproc-daemon-perl/libproc-daemon-perl_0.23-2.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2146 (2.1K) [text/prs.lines.tag] Saving to: ‘libproc-daemon-perl_0.23-2.dsc’ 0K .. 100% 265M=0s 2024-05-12 12:45:59 (265 MB/s) - ‘libproc-daemon-perl_0.23-2.dsc’ saved [2146/2146] Sun May 12 12:45:59 UTC 2024 I: libproc-daemon-perl_0.23-2.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: libproc-daemon-perl Binary: libproc-daemon-perl Architecture: all Version: 0.23-2 Maintainer: Debian Perl Group Uploaders: Salvatore Bonaccorso Homepage: https://metacpan.org/release/Proc-Daemon Standards-Version: 4.1.4 Vcs-Browser: https://salsa.debian.org/perl-team/modules/packages/libproc-daemon-perl Vcs-Git: https://salsa.debian.org/perl-team/modules/packages/libproc-daemon-perl.git Testsuite: autopkgtest-pkg-perl Build-Depends: debhelper-compat (= 12) Build-Depends-Indep: libproc-processtable-perl, perl Package-List: libproc-daemon-perl deb perl optional arch=all Checksums-Sha1: 54112bde1c5c80a23c3a500b66f0bbcc93515d32 22782 libproc-daemon-perl_0.23.orig.tar.gz 8f72d7703015d96e3ef5c6b24d62c9daef8eda82 3792 libproc-daemon-perl_0.23-2.debian.tar.xz Checksums-Sha256: 34c0b85b7948b431cbabc97cee580835e515ccf43badbd8339eb109474089b69 22782 libproc-daemon-perl_0.23.orig.tar.gz ca78b486df45f8e0c50f382fe939aec56aa00a4b407b1149ef829bd7afbe97d7 3792 libproc-daemon-perl_0.23-2.debian.tar.xz Files: c5fb746a14b6948bb8533a6b6e9650bc 22782 libproc-daemon-perl_0.23.orig.tar.gz 1f2bd520c1695e6a11feef355aa70213 3792 libproc-daemon-perl_0.23-2.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQIzBAEBCgAdFiEEsjhixBXWVlpOhsvXV5wWDUyeI+gFAmKsMUAACgkQV5wWDUye I+h0fQ//V5BM2MtRwjBEbo9mgM65tIUi5FbG+L2F3UiaWNQW2I6WDxa+1IIdX3Oh FNQFCmHR/mz+g4lwdkYAtru9irTWMi+5C3LJ7nVDNp0ineKRLj1C9jWPk0JhOAJ+ x2yhcnu3o0o5wNigbHFgBePZQzukyVW3uhKXSzRftIzhDryczmBoecXLbQ5s4WyY P2VtGPdavrdK83PTeacA4V/9V5qPZGll43vZ+CYqTY+Zhd53CQ6PPUORKUtKAroo GeafPdA2UDqrExOBr5S3WjtNpallVPqje5TOlnODXXF8ItyD0yJO5p5E8KpzrF/3 eLx52IFaw2Kutj3wmcStlieW+PaKNuK9TTWTJk6kwXhUmQJu3lu0Qk2wUlx9jtt4 R+4+/M7vLxXExJexzOBvSRMbAe26LjQxv3gnKcffv1UJ55vljR7r5gHMLZ6gNovY zhaOENM3a1MnOPeY3sXfJfZ4b9NES2gjH4ab6KWhvMVn1jUeq4eWjDYMbCAOmwAd LIEgmLNZxoB3zPInnIySXjn8GgK2xWFGlsZWuUqltn10Qno3blVVXqIgP3clkGb4 9yDtc1PHNgkqN4dfkITiDUpf7Zg7RiI+kwMR71Bd1DwY+VWOAeOeFzsyKmtY3oKq cQZoxjhdj6p/OlJJxwbe765jTRwcPOd05kDLsWlZEzjkVeubhK4= =1idx -----END PGP SIGNATURE----- Sun May 12 12:45:59 UTC 2024 I: Checking whether the package is not for us Sun May 12 12:45:59 UTC 2024 I: Starting 1st build on remote node codethink02-arm64.debian.net. Sun May 12 12:45:59 UTC 2024 I: Preparing to do remote build '1' on codethink02-arm64.debian.net. Sun May 12 12:46:29 UTC 2024 I: Deleting $TMPDIR on codethink02-arm64.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Sun May 12 00:46:02 -12 2024 I: pbuilder-time-stamp: 1715517962 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libproc-daemon-perl_0.23-2.dsc] I: copying [./libproc-daemon-perl_0.23.orig.tar.gz] I: copying [./libproc-daemon-perl_0.23-2.debian.tar.xz] I: Extracting source gpgv: Signature made Fri Jun 17 07:46:08 2022 gpgv: using RSA key B23862C415D6565A4E86CBD7579C160D4C9E23E8 gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./libproc-daemon-perl_0.23-2.dsc: no acceptable signature found dpkg-source: info: extracting libproc-daemon-perl in libproc-daemon-perl-0.23 dpkg-source: info: unpacking libproc-daemon-perl_0.23.orig.tar.gz dpkg-source: info: unpacking libproc-daemon-perl_0.23-2.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying pod.patch I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/660802/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='arm64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='arm64' IFS=' ' INVOCATION_ID='56e9005f937947719f616696ef5dc2fc' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='660802' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.xBn0Y6Q3/pbuilderrc_t36r --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.xBn0Y6Q3/b1 --logfile b1/build.log libproc-daemon-perl_0.23-2.dsc' SUDO_GID='109' SUDO_UID='104' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://192.168.101.4:3128' I: uname -a Linux codethink02-arm64 6.1.0-21-cloud-arm64 #1 SMP Debian 6.1.90-1 (2024-05-03) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 May 12 11:38 /bin -> usr/bin I: user script /srv/workspace/pbuilder/660802/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 12), libproc-processtable-perl, perl dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19745 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 12); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libproc-processtable-perl; however: Package libproc-processtable-perl is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libicu72{a} libmagic-mgc{a} libmagic1t64{a} libpipeline1{a} libproc-processtable-perl{a} libsub-override-perl{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 31 newly installed, 0 to remove and 0 not upgraded. Need to get 18.7 MB of archives. After unpacking 76.1 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main arm64 sensible-utils all 0.0.22 [22.4 kB] Get: 2 http://deb.debian.org/debian trixie/main arm64 libmagic-mgc arm64 1:5.45-3 [314 kB] Get: 3 http://deb.debian.org/debian trixie/main arm64 libmagic1t64 arm64 1:5.45-3 [100 kB] Get: 4 http://deb.debian.org/debian trixie/main arm64 file arm64 1:5.45-3 [43.0 kB] Get: 5 http://deb.debian.org/debian trixie/main arm64 gettext-base arm64 0.21-14+b1 [160 kB] Get: 6 http://deb.debian.org/debian trixie/main arm64 libuchardet0 arm64 0.0.8-1+b1 [69.0 kB] Get: 7 http://deb.debian.org/debian trixie/main arm64 groff-base arm64 1.23.0-4 [1130 kB] Get: 8 http://deb.debian.org/debian trixie/main arm64 bsdextrautils arm64 2.40-8 [93.0 kB] Get: 9 http://deb.debian.org/debian trixie/main arm64 libpipeline1 arm64 1.5.7-2 [36.5 kB] Get: 10 http://deb.debian.org/debian trixie/main arm64 man-db arm64 2.12.1-1 [1394 kB] Get: 11 http://deb.debian.org/debian trixie/main arm64 m4 arm64 1.4.19-4 [277 kB] Get: 12 http://deb.debian.org/debian trixie/main arm64 autoconf all 2.71-3 [332 kB] Get: 13 http://deb.debian.org/debian trixie/main arm64 autotools-dev all 20220109.1 [51.6 kB] Get: 14 http://deb.debian.org/debian trixie/main arm64 automake all 1:1.16.5-1.3 [823 kB] Get: 15 http://deb.debian.org/debian trixie/main arm64 autopoint all 0.21-14 [496 kB] Get: 16 http://deb.debian.org/debian trixie/main arm64 libdebhelper-perl all 13.15.3 [88.0 kB] Get: 17 http://deb.debian.org/debian trixie/main arm64 libtool all 2.4.7-7 [517 kB] Get: 18 http://deb.debian.org/debian trixie/main arm64 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian trixie/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian trixie/main arm64 libsub-override-perl all 0.10-1 [10.6 kB] Get: 21 http://deb.debian.org/debian trixie/main arm64 libfile-stripnondeterminism-perl all 1.13.1-1 [19.4 kB] Get: 22 http://deb.debian.org/debian trixie/main arm64 dh-strip-nondeterminism all 1.13.1-1 [8620 B] Get: 23 http://deb.debian.org/debian trixie/main arm64 libelf1t64 arm64 0.191-1+b1 [187 kB] Get: 24 http://deb.debian.org/debian trixie/main arm64 dwz arm64 0.15-1+b1 [102 kB] Get: 25 http://deb.debian.org/debian trixie/main arm64 libicu72 arm64 72.1-4+b1 [9224 kB] Get: 26 http://deb.debian.org/debian trixie/main arm64 libxml2 arm64 2.9.14+dfsg-1.3+b3 [624 kB] Get: 27 http://deb.debian.org/debian trixie/main arm64 gettext arm64 0.21-14+b1 [1249 kB] Get: 28 http://deb.debian.org/debian trixie/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 29 http://deb.debian.org/debian trixie/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 30 http://deb.debian.org/debian trixie/main arm64 debhelper all 13.15.3 [901 kB] Get: 31 http://deb.debian.org/debian trixie/main arm64 libproc-processtable-perl arm64 0.636-1+b2 [41.6 kB] Fetched 18.7 MB in 0s (140 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19745 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.22_all.deb ... Unpacking sensible-utils (0.0.22) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3_arm64.deb ... Unpacking libmagic-mgc (1:5.45-3) ... Selecting previously unselected package libmagic1t64:arm64. Preparing to unpack .../02-libmagic1t64_1%3a5.45-3_arm64.deb ... Unpacking libmagic1t64:arm64 (1:5.45-3) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-3_arm64.deb ... Unpacking file (1:5.45-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.21-14+b1_arm64.deb ... Unpacking gettext-base (0.21-14+b1) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../05-libuchardet0_0.0.8-1+b1_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.8-1+b1) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-4_arm64.deb ... Unpacking groff-base (1.23.0-4) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.40-8_arm64.deb ... Unpacking bsdextrautils (2.40-8) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../08-libpipeline1_1.5.7-2_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.7-2) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.12.1-1_arm64.deb ... Unpacking man-db (2.12.1-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-4_arm64.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.71-3_all.deb ... Unpacking autoconf (2.71-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.21-14_all.deb ... Unpacking autopoint (0.21-14) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.15.3_all.deb ... Unpacking libdebhelper-perl (13.15.3) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.4.7-7_all.deb ... Unpacking libtool (2.4.7-7) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libsub-override-perl. Preparing to unpack .../19-libsub-override-perl_0.10-1_all.deb ... Unpacking libsub-override-perl (0.10-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../20-libfile-stripnondeterminism-perl_1.13.1-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.13.1-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../21-dh-strip-nondeterminism_1.13.1-1_all.deb ... Unpacking dh-strip-nondeterminism (1.13.1-1) ... Selecting previously unselected package libelf1t64:arm64. Preparing to unpack .../22-libelf1t64_0.191-1+b1_arm64.deb ... Unpacking libelf1t64:arm64 (0.191-1+b1) ... Selecting previously unselected package dwz. Preparing to unpack .../23-dwz_0.15-1+b1_arm64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libicu72:arm64. Preparing to unpack .../24-libicu72_72.1-4+b1_arm64.deb ... Unpacking libicu72:arm64 (72.1-4+b1) ... Selecting previously unselected package libxml2:arm64. Preparing to unpack .../25-libxml2_2.9.14+dfsg-1.3+b3_arm64.deb ... Unpacking libxml2:arm64 (2.9.14+dfsg-1.3+b3) ... Selecting previously unselected package gettext. Preparing to unpack .../26-gettext_0.21-14+b1_arm64.deb ... Unpacking gettext (0.21-14+b1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../27-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../28-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../29-debhelper_13.15.3_all.deb ... Unpacking debhelper (13.15.3) ... Selecting previously unselected package libproc-processtable-perl:arm64. Preparing to unpack .../30-libproc-processtable-perl_0.636-1+b2_arm64.deb ... Unpacking libproc-processtable-perl:arm64 (0.636-1+b2) ... Setting up libpipeline1:arm64 (1.5.7-2) ... Setting up libicu72:arm64 (72.1-4+b1) ... Setting up bsdextrautils (2.40-8) ... Setting up libmagic-mgc (1:5.45-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.15.3) ... Setting up libmagic1t64:arm64 (1:5.45-3) ... Setting up gettext-base (0.21-14+b1) ... Setting up m4 (1.4.19-4) ... Setting up file (1:5.45-3) ... Setting up libelf1t64:arm64 (0.191-1+b1) ... Setting up autotools-dev (20220109.1) ... Setting up autopoint (0.21-14) ... Setting up autoconf (2.71-3) ... Setting up dwz (0.15-1+b1) ... Setting up libproc-processtable-perl:arm64 (0.636-1+b2) ... Setting up sensible-utils (0.0.22) ... Setting up libuchardet0:arm64 (0.0.8-1+b1) ... Setting up libsub-override-perl (0.10-1) ... Setting up libxml2:arm64 (2.9.14+dfsg-1.3+b3) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.13.1-1) ... Setting up gettext (0.21-14+b1) ... Setting up libtool (2.4.7-7) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.13.1-1) ... Setting up groff-base (1.23.0-4) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.12.1-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.15.3) ... Processing triggers for libc-bin (2.38-10) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.33-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/reproducible-path/libproc-daemon-perl-0.23/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libproc-daemon-perl_0.23-2_source.changes dpkg-buildpackage: info: source package libproc-daemon-perl dpkg-buildpackage: info: source version 0.23-2 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Jelmer Vernooij dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 fakeroot debian/rules clean dh clean dh_clean debian/rules build dh build dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libproc-daemon-perl-0.23=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2" "LD=aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libproc-daemon-perl-0.23=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Proc::Daemon Writing MYMETA.yml and MYMETA.json dh_auto_build make -j12 make[1]: Entering directory '/build/reproducible-path/libproc-daemon-perl-0.23' cp lib/Proc/Daemon.pod blib/lib/Proc/Daemon.pod cp lib/Proc/Daemon.pm blib/lib/Proc/Daemon.pm Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libproc-daemon-perl-0.23' dh_auto_test make -j12 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libproc-daemon-perl-0.23' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/01_loadmodule.t .. 1..1 ok 1 - loading Proc::Daemon ok # Proc::ProcessTable is installed and did find the right PID for 'perl /build/reproducible-path/libproc-daemon-perl-0.23/t/kid.pl': 670425 t/02_testmodule.t .. 1..19 ok 1 - child_1 was created with PID: 669140 ok 2 - child_1 process did exit within 2 sec. ok 3 - child_1 has created a 'pid.file' ok 4 - the 'pid.file' contains the right PID: 669140 ok 5 - the 'pid.file' has right permissions ok 6 - child_1 has created a 'output.file' ok 7 - the content of the 'output.file' was right. ok 8 - child_1 has created a 'error.file' ok 9 - child_1 has created the 'kid.pl' file ok 10 - child_2 was created with PID: 670425 ok 11 - child_2 created a 'pid_1.file' ok 12 - the 'pid_1.file' contains the right PID: 670425 ok 13 - child_2 created a 'output_1.file' ok 14 - child_2 created a 'error_1.file' ok 15 - 'kid.pl' daemon is still running ok 16 - stop daemon 'kid.pl' ok 17 - 'kid.pl' daemon was stopped within 1 sec. ok 18 - the 'umask.file' has right permissions ok 19 - the 'pid2.file' has right permissions via file_umask ok # Proc::ProcessTable is installed and did find the right PID for 'perl /build/reproducible-path/libproc-daemon-perl-0.23/t/kid.pl': 673874 t/03_taintmode.t ... 1..19 ok 1 - child_1 was created with PID: 672676 ok 2 - child_1 process did exit within 2 sec. ok 3 - child_1 has created a 'pid.file' ok 4 - the 'pid.file' contains the right PID: 672676 ok 5 - the 'pid.file' has right permissions ok 6 - child_1 has created a 'output.file' ok 7 - the content of the 'output.file' was right. ok 8 - child_1 has created a 'error.file' ok 9 - child_1 has created the 'kid.pl' file ok 10 - child_2 was created with PID: 673874 ok 11 - child_2 created a 'pid_1.file' ok 12 - the 'pid_1.file' contains the right PID: 673874 ok 13 - child_2 created a 'output_1.file' ok 14 - child_2 created a 'error_1.file' ok 15 - 'kid.pl' daemon is still running ok 16 - stop daemon 'kid.pl' ok 17 - 'kid.pl' daemon was stopped within 1 sec. ok 18 - the 'umask.file' has right permissions ok 19 - the 'pid2.file' has right permissions via file_umask ok All tests successful. Files=3, Tests=39, 9 wallclock secs ( 0.02 usr 0.01 sys + 0.32 cusr 0.10 csys = 0.45 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libproc-daemon-perl-0.23' create-stamp debian/debhelper-build-stamp fakeroot debian/rules binary dh binary dh_testroot dh_prep dh_auto_install --destdir=debian/libproc-daemon-perl/ make -j12 install DESTDIR=/build/reproducible-path/libproc-daemon-perl-0.23/debian/libproc-daemon-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libproc-daemon-perl-0.23' Manifying 1 pod document Installing /build/reproducible-path/libproc-daemon-perl-0.23/debian/libproc-daemon-perl/usr/share/perl5/Proc/Daemon.pm Installing /build/reproducible-path/libproc-daemon-perl-0.23/debian/libproc-daemon-perl/usr/share/perl5/Proc/Daemon.pod Installing /build/reproducible-path/libproc-daemon-perl-0.23/debian/libproc-daemon-perl/usr/share/man/man3/Proc::Daemon.3pm make[1]: Leaving directory '/build/reproducible-path/libproc-daemon-perl-0.23' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libproc-daemon-perl' in '../libproc-daemon-perl_0.23-2_all.deb'. dpkg-genbuildinfo --build=binary -O../libproc-daemon-perl_0.23-2_arm64.buildinfo dpkg-genchanges --build=binary -O../libproc-daemon-perl_0.23-2_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/660802 and its subdirectories I: Current time: Sun May 12 00:46:27 -12 2024 I: pbuilder-time-stamp: 1715517987 Sun May 12 12:46:29 UTC 2024 I: 1st build successful. Starting 2nd build on remote node codethink03-arm64.debian.net. Sun May 12 12:46:29 UTC 2024 I: Preparing to do remote build '2' on codethink03-arm64.debian.net. Sun May 12 12:47:07 UTC 2024 I: Deleting $TMPDIR on codethink03-arm64.debian.net. Sun May 12 12:47:08 UTC 2024 I: libproc-daemon-perl_0.23-2_arm64.changes: Format: 1.8 Date: Fri, 17 Jun 2022 08:45:33 +0100 Source: libproc-daemon-perl Binary: libproc-daemon-perl Architecture: all Version: 0.23-2 Distribution: unstable Urgency: medium Maintainer: Debian Perl Group Changed-By: Jelmer Vernooij Description: libproc-daemon-perl - module for running scripts as daemons Changes: libproc-daemon-perl (0.23-2) unstable; urgency=medium . [ Salvatore Bonaccorso ] * debian/control: Use HTTPS transport protocol for Vcs-Git URI . [ gregor herrmann ] * debian/copyright: change Copyright-Format 1.0 URL to HTTPS. * Remove Jonathan Yu from Uploaders. Thanks for your work! . [ Alex Muntada ] * Remove inactive pkg-perl members from Uploaders. . [ Salvatore Bonaccorso ] * Update Vcs-* headers for switch to salsa.debian.org . [ Guillaume Bougard] * Bump Standards-Version to 4.1.4 * Update debhelper version support to 10 in d/compat & d/control . [ gregor herrmann ] * debian/watch: use uscan version 4. . [ Debian Janitor ] * Bump debhelper from old 10 to 12. * Set debhelper-compat version in Build-Depends. * Set upstream metadata fields: Bug-Database, Bug-Submit, Repository- Browse. * Remove obsolete fields Contact, Name from debian/upstream/metadata (already present in machine-readable debian/copyright). Checksums-Sha1: e5ca528155af7c7d74eec89f9ce38a2839abca54 21220 libproc-daemon-perl_0.23-2_all.deb b322ffd3d32503221bf838c9d832c71d33e15940 4908 libproc-daemon-perl_0.23-2_arm64.buildinfo Checksums-Sha256: 6b169761c4d9ae753149e7db024dd1a38c4e5ea819ab881802880bb42505d63d 21220 libproc-daemon-perl_0.23-2_all.deb ce3e631949e22a62faf78c699fb448074acca1390640b62aa6229ad9b47cbadf 4908 libproc-daemon-perl_0.23-2_arm64.buildinfo Files: 0dffb55161bcd72ba8c229eb3c413d0c 21220 perl optional libproc-daemon-perl_0.23-2_all.deb 6291e8a49fca7d2f94228cef6dbb4b40 4908 perl optional libproc-daemon-perl_0.23-2_arm64.buildinfo Sun May 12 12:47:09 UTC 2024 I: diffoscope 266 will be used to compare the two builds: Running as unit: rb-diffoscope-arm64_19-17881.service # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.xBn0Y6Q3/libproc-daemon-perl_0.23-2.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.xBn0Y6Q3/libproc-daemon-perl_0.23-2.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.xBn0Y6Q3/libproc-daemon-perl_0.23-2.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.xBn0Y6Q3/b1/libproc-daemon-perl_0.23-2_arm64.changes /srv/reproducible-results/rbuild-debian/r-b-build.xBn0Y6Q3/b2/libproc-daemon-perl_0.23-2_arm64.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.489s) 0.489s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.018s) 0.018s 12 calls diffoscope.comparators.binary.FilesystemFile ## specialize (total time: 0.000s) 0.000s 1 call specialize Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 949ms CPU time consumed: 942ms Sun May 12 13:00:55 UTC 2024 I: diffoscope 266 found no differences in the changes files, and a .buildinfo file also exists. Sun May 12 13:00:55 UTC 2024 I: libproc-daemon-perl from trixie built successfully and reproducibly on arm64. Sun May 12 13:01:00 UTC 2024 I: Submitting .buildinfo files to external archives: Sun May 12 13:01:00 UTC 2024 I: Submitting 8.0K b1/libproc-daemon-perl_0.23-2_arm64.buildinfo.asc Sun May 12 13:01:07 UTC 2024 I: Submitting 8.0K b2/libproc-daemon-perl_0.23-2_arm64.buildinfo.asc Sun May 12 13:01:27 UTC 2024 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Sun May 12 13:01:27 UTC 2024 I: Done submitting .buildinfo files. Sun May 12 13:01:27 UTC 2024 I: Removing signed libproc-daemon-perl_0.23-2_arm64.buildinfo.asc files: removed './b1/libproc-daemon-perl_0.23-2_arm64.buildinfo.asc' removed './b2/libproc-daemon-perl_0.23-2_arm64.buildinfo.asc'