Wed May 8 07:48:42 UTC 2024 I: starting to build libmodule-install-rtx-perl/trixie/arm64 on jenkins on '2024-05-08 07:48' Wed May 8 07:48:42 UTC 2024 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/arm64_1/19142/console.log Wed May 8 07:48:42 UTC 2024 I: Downloading source for trixie/libmodule-install-rtx-perl=0.43-1 --2024-05-08 07:48:43-- http://deb.debian.org/debian/pool/main/libm/libmodule-install-rtx-perl/libmodule-install-rtx-perl_0.43-1.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2352 (2.3K) [text/prs.lines.tag] Saving to: ‘libmodule-install-rtx-perl_0.43-1.dsc’ 0K .. 100% 267M=0s 2024-05-08 07:48:43 (267 MB/s) - ‘libmodule-install-rtx-perl_0.43-1.dsc’ saved [2352/2352] Wed May 8 07:48:43 UTC 2024 I: libmodule-install-rtx-perl_0.43-1.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Format: 3.0 (quilt) Source: libmodule-install-rtx-perl Binary: libmodule-install-rtx-perl Architecture: all Version: 0.43-1 Maintainer: Debian Request Tracker Group Uploaders: KURASHIKI Satoru , Dominic Hargreaves , Andrew Ruthven Homepage: https://metacpan.org/release/Module-Install-RTx Standards-Version: 4.6.1 Vcs-Browser: https://salsa.debian.org/request-tracker-team/libmodule-install-rtx-perl Vcs-Git: https://salsa.debian.org/request-tracker-team/libmodule-install-rtx-perl.git Build-Depends: debhelper-compat (= 13), libmodule-build-perl Build-Depends-Indep: libmodule-install-perl (>= 0.4), libmodule-install-readmefrompod-perl, perl (>= 5.15.2) Package-List: libmodule-install-rtx-perl deb perl optional arch=all Checksums-Sha1: 6e8b65cbaa7b1e482d7959973c7c73ebbd783d1d 27813 libmodule-install-rtx-perl_0.43.orig.tar.gz ddb028ac590c4acd02b35283f87a179e54472341 3484 libmodule-install-rtx-perl_0.43-1.debian.tar.xz Checksums-Sha256: cab109b25f6c86220a0f0a0b141636ee5af3cee8f25664c329b58ab95667112b 27813 libmodule-install-rtx-perl_0.43.orig.tar.gz 7e6dc1c1c9c50e450707e25f5e9f7730503e657ccec4a418989fc6fbc6b549d7 3484 libmodule-install-rtx-perl_0.43-1.debian.tar.xz Files: 75d3466c280bb5e2251a1a82b0bac434 27813 libmodule-install-rtx-perl_0.43.orig.tar.gz d35b66f925f348f14a467cfe169b17cb 3484 libmodule-install-rtx-perl_0.43-1.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQIzBAEBCAAdFiEExgP8TmAPHOzRyNl8S1PZMeTT6GMFAmLZ1vIACgkQS1PZMeTT 6GNCKw/8D3HYiLIf9xk2DoUtytqoorxBNgklmQhyaSplMSd2CvRiKiJXmo3VChfG qrNrI6EOT/5IDSQSaz9m1VMRGkcWUfBQCdATceqR8HES/eHn47+wTJHa0Z5Wg9p+ H7DnDLmeYmzS0TvTEgisQ0nhFd7aTmZsh3Aa1wnJtDo9AqmHIjpBJWUk3+tkAUC7 QjPpXWQoK2fJ3cGdfJTmMzHJYKvVfLt7A+hls+R04F8WYWl8Y/FA8bkeouFdNUoi PO72TJ8go/zIYWrAqKYe99YpBYajMvp+BrRi+3jzTdQtNdpDUoBVXGonumh2Poc8 sIPvbCUjovMqT1rviUgydun9odWsUe5Pu1MY/T7mu6g5YYwWDdh9neexZa6rG4Fj Ud5wuiI4Okyx9ix2OEZWi+774EbiUxGzIgsxRZzhX/afnyNAi5ZQc2ry8MVunckE hSCyZk383eKXmHQtS2Hy7J1pOXVBEywt4d7ZGunHJXGNfISYmxA4Z1dstZnK+OW8 gm3MdAQVcNIF8PzWndPGQtt/evgxubFYRPmWJ+2wND58ptuua0KXMt8shmFRFlAm 1La9OrF57g5jEv7poQpgC2m6ljfcFL8yYJIF4R2lxxnfJMN6kxPc8nejWygwifl6 sWR9HFLXjcVmswVtWkAwmQ815mIV9Ri7WOcrriVmnpaCj2fIsb0= =dWWy -----END PGP SIGNATURE----- Wed May 8 07:48:43 UTC 2024 I: Checking whether the package is not for us Wed May 8 07:48:43 UTC 2024 I: Starting 1st build on remote node codethink01-arm64.debian.net. Wed May 8 07:48:43 UTC 2024 I: Preparing to do remote build '1' on codethink01-arm64.debian.net. Wed May 8 07:49:07 UTC 2024 I: Deleting $TMPDIR on codethink01-arm64.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Tue Jun 10 02:11:45 -12 2025 I: pbuilder-time-stamp: 1749564705 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libmodule-install-rtx-perl_0.43-1.dsc] I: copying [./libmodule-install-rtx-perl_0.43.orig.tar.gz] I: copying [./libmodule-install-rtx-perl_0.43-1.debian.tar.xz] I: Extracting source gpgv: Signature made Thu Jul 21 22:45:06 2022 gpgv: using RSA key C603FC4E600F1CECD1C8D97C4B53D931E4D3E863 gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./libmodule-install-rtx-perl_0.43-1.dsc: no acceptable signature found dpkg-source: info: extracting libmodule-install-rtx-perl in libmodule-install-rtx-perl-0.43 dpkg-source: info: unpacking libmodule-install-rtx-perl_0.43.orig.tar.gz dpkg-source: info: unpacking libmodule-install-rtx-perl_0.43-1.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying 01-fix-plugindir.patch I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/557361/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='arm64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='arm64' IFS=' ' INVOCATION_ID='78c59d4fb40b44e08ce59be785ef31ea' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='557361' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.S1qzYl8t/pbuilderrc_6V7E --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.S1qzYl8t/b1 --logfile b1/build.log libmodule-install-rtx-perl_0.43-1.dsc' SUDO_GID='109' SUDO_UID='104' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://192.168.101.4:3128' I: uname -a Linux codethink01-arm64 6.1.0-21-cloud-arm64 #1 SMP Debian 6.1.90-1 (2024-05-03) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Jun 7 17:47 /bin -> usr/bin I: user script /srv/workspace/pbuilder/557361/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), libmodule-build-perl, libmodule-install-perl (>= 0.4), libmodule-install-readmefrompod-perl, perl (>= 5.15.2) dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19743 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libmodule-build-perl; however: Package libmodule-build-perl is not installed. pbuilder-satisfydepends-dummy depends on libmodule-install-perl (>= 0.4); however: Package libmodule-install-perl is not installed. pbuilder-satisfydepends-dummy depends on libmodule-install-readmefrompod-perl; however: Package libmodule-install-readmefrompod-perl is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libany-uri-escape-perl{a} libarchive-zip-perl{a} libcapture-tiny-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-remove-perl{a} libfile-stripnondeterminism-perl{a} libicu72{a} libio-all-perl{a} libmagic-mgc{a} libmagic1t64{a} libmodule-build-perl{a} libmodule-install-perl{a} libmodule-install-readmefrompod-perl{a} libmodule-scandeps-perl{a} libpipeline1{a} libpod-markdown-perl{a} libspiffy-perl{a} libsub-override-perl{a} libtool{a} libuchardet0{a} liburi-perl{a} libxml2{a} libyaml-tiny-perl{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libfile-homedir-perl libhtml-parser-perl libjson-perl libltdl-dev libmail-sendmail-perl libmodule-signature-perl libpar-dist-perl libpod-readme-perl libsoftware-license-perl liburi-escape-xs-perl libwww-perl lynx pod2pdf wget 0 packages upgraded, 42 newly installed, 0 to remove and 0 not upgraded. Need to get 19.4 MB of archives. After unpacking 77.8 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main arm64 sensible-utils all 0.0.22 [22.4 kB] Get: 2 http://deb.debian.org/debian trixie/main arm64 libmagic-mgc arm64 1:5.45-3 [314 kB] Get: 3 http://deb.debian.org/debian trixie/main arm64 libmagic1t64 arm64 1:5.45-3 [100 kB] Get: 4 http://deb.debian.org/debian trixie/main arm64 file arm64 1:5.45-3 [43.0 kB] Get: 5 http://deb.debian.org/debian trixie/main arm64 gettext-base arm64 0.21-14+b1 [160 kB] Get: 6 http://deb.debian.org/debian trixie/main arm64 libuchardet0 arm64 0.0.8-1+b1 [69.0 kB] Get: 7 http://deb.debian.org/debian trixie/main arm64 groff-base arm64 1.23.0-4 [1130 kB] Get: 8 http://deb.debian.org/debian trixie/main arm64 bsdextrautils arm64 2.40-8 [93.0 kB] Get: 9 http://deb.debian.org/debian trixie/main arm64 libpipeline1 arm64 1.5.7-2 [36.5 kB] Get: 10 http://deb.debian.org/debian trixie/main arm64 man-db arm64 2.12.1-1 [1394 kB] Get: 11 http://deb.debian.org/debian trixie/main arm64 m4 arm64 1.4.19-4 [277 kB] Get: 12 http://deb.debian.org/debian trixie/main arm64 autoconf all 2.71-3 [332 kB] Get: 13 http://deb.debian.org/debian trixie/main arm64 autotools-dev all 20220109.1 [51.6 kB] Get: 14 http://deb.debian.org/debian trixie/main arm64 automake all 1:1.16.5-1.3 [823 kB] Get: 15 http://deb.debian.org/debian trixie/main arm64 autopoint all 0.21-14 [496 kB] Get: 16 http://deb.debian.org/debian trixie/main arm64 libdebhelper-perl all 13.15.3 [88.0 kB] Get: 17 http://deb.debian.org/debian trixie/main arm64 libtool all 2.4.7-7 [517 kB] Get: 18 http://deb.debian.org/debian trixie/main arm64 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian trixie/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian trixie/main arm64 libsub-override-perl all 0.10-1 [10.6 kB] Get: 21 http://deb.debian.org/debian trixie/main arm64 libfile-stripnondeterminism-perl all 1.13.1-1 [19.4 kB] Get: 22 http://deb.debian.org/debian trixie/main arm64 dh-strip-nondeterminism all 1.13.1-1 [8620 B] Get: 23 http://deb.debian.org/debian trixie/main arm64 libelf1t64 arm64 0.191-1+b1 [187 kB] Get: 24 http://deb.debian.org/debian trixie/main arm64 dwz arm64 0.15-1+b1 [102 kB] Get: 25 http://deb.debian.org/debian trixie/main arm64 libicu72 arm64 72.1-4+b1 [9224 kB] Get: 26 http://deb.debian.org/debian trixie/main arm64 libxml2 arm64 2.9.14+dfsg-1.3+b3 [624 kB] Get: 27 http://deb.debian.org/debian trixie/main arm64 gettext arm64 0.21-14+b1 [1249 kB] Get: 28 http://deb.debian.org/debian trixie/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 29 http://deb.debian.org/debian trixie/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 30 http://deb.debian.org/debian trixie/main arm64 debhelper all 13.15.3 [901 kB] Get: 31 http://deb.debian.org/debian trixie/main arm64 liburi-perl all 5.28-1 [98.6 kB] Get: 32 http://deb.debian.org/debian trixie/main arm64 libany-uri-escape-perl all 0.01-4 [5036 B] Get: 33 http://deb.debian.org/debian trixie/main arm64 libcapture-tiny-perl all 0.48-2 [24.6 kB] Get: 34 http://deb.debian.org/debian trixie/main arm64 libfile-remove-perl all 1.61-2 [16.1 kB] Get: 35 http://deb.debian.org/debian trixie/main arm64 libspiffy-perl all 0.46-1 [25.7 kB] Get: 36 http://deb.debian.org/debian trixie/main arm64 libio-all-perl all 0.87-2 [67.3 kB] Get: 37 http://deb.debian.org/debian trixie/main arm64 libmodule-build-perl all 0.423400-2 [252 kB] Get: 38 http://deb.debian.org/debian trixie/main arm64 libmodule-scandeps-perl all 1.35-1 [43.7 kB] Get: 39 http://deb.debian.org/debian trixie/main arm64 libyaml-tiny-perl all 1.74-1 [30.7 kB] Get: 40 http://deb.debian.org/debian trixie/main arm64 libmodule-install-perl all 1.21-2 [139 kB] Get: 41 http://deb.debian.org/debian trixie/main arm64 libpod-markdown-perl all 3.400000-1 [33.2 kB] Get: 42 http://deb.debian.org/debian trixie/main arm64 libmodule-install-readmefrompod-perl all 0.30-4 [12.6 kB] Fetched 19.4 MB in 0s (135 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19743 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.22_all.deb ... Unpacking sensible-utils (0.0.22) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3_arm64.deb ... Unpacking libmagic-mgc (1:5.45-3) ... Selecting previously unselected package libmagic1t64:arm64. Preparing to unpack .../02-libmagic1t64_1%3a5.45-3_arm64.deb ... Unpacking libmagic1t64:arm64 (1:5.45-3) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-3_arm64.deb ... Unpacking file (1:5.45-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.21-14+b1_arm64.deb ... Unpacking gettext-base (0.21-14+b1) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../05-libuchardet0_0.0.8-1+b1_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.8-1+b1) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-4_arm64.deb ... Unpacking groff-base (1.23.0-4) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.40-8_arm64.deb ... Unpacking bsdextrautils (2.40-8) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../08-libpipeline1_1.5.7-2_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.7-2) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.12.1-1_arm64.deb ... Unpacking man-db (2.12.1-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-4_arm64.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.71-3_all.deb ... Unpacking autoconf (2.71-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.21-14_all.deb ... Unpacking autopoint (0.21-14) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.15.3_all.deb ... Unpacking libdebhelper-perl (13.15.3) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.4.7-7_all.deb ... Unpacking libtool (2.4.7-7) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libsub-override-perl. Preparing to unpack .../19-libsub-override-perl_0.10-1_all.deb ... Unpacking libsub-override-perl (0.10-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../20-libfile-stripnondeterminism-perl_1.13.1-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.13.1-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../21-dh-strip-nondeterminism_1.13.1-1_all.deb ... Unpacking dh-strip-nondeterminism (1.13.1-1) ... Selecting previously unselected package libelf1t64:arm64. Preparing to unpack .../22-libelf1t64_0.191-1+b1_arm64.deb ... Unpacking libelf1t64:arm64 (0.191-1+b1) ... Selecting previously unselected package dwz. Preparing to unpack .../23-dwz_0.15-1+b1_arm64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libicu72:arm64. Preparing to unpack .../24-libicu72_72.1-4+b1_arm64.deb ... Unpacking libicu72:arm64 (72.1-4+b1) ... Selecting previously unselected package libxml2:arm64. Preparing to unpack .../25-libxml2_2.9.14+dfsg-1.3+b3_arm64.deb ... Unpacking libxml2:arm64 (2.9.14+dfsg-1.3+b3) ... Selecting previously unselected package gettext. Preparing to unpack .../26-gettext_0.21-14+b1_arm64.deb ... Unpacking gettext (0.21-14+b1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../27-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../28-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../29-debhelper_13.15.3_all.deb ... Unpacking debhelper (13.15.3) ... Selecting previously unselected package liburi-perl. Preparing to unpack .../30-liburi-perl_5.28-1_all.deb ... Unpacking liburi-perl (5.28-1) ... Selecting previously unselected package libany-uri-escape-perl. Preparing to unpack .../31-libany-uri-escape-perl_0.01-4_all.deb ... Unpacking libany-uri-escape-perl (0.01-4) ... Selecting previously unselected package libcapture-tiny-perl. Preparing to unpack .../32-libcapture-tiny-perl_0.48-2_all.deb ... Unpacking libcapture-tiny-perl (0.48-2) ... Selecting previously unselected package libfile-remove-perl. Preparing to unpack .../33-libfile-remove-perl_1.61-2_all.deb ... Unpacking libfile-remove-perl (1.61-2) ... Selecting previously unselected package libspiffy-perl. Preparing to unpack .../34-libspiffy-perl_0.46-1_all.deb ... Unpacking libspiffy-perl (0.46-1) ... Selecting previously unselected package libio-all-perl. Preparing to unpack .../35-libio-all-perl_0.87-2_all.deb ... Unpacking libio-all-perl (0.87-2) ... Selecting previously unselected package libmodule-build-perl. Preparing to unpack .../36-libmodule-build-perl_0.423400-2_all.deb ... Adding 'diversion of /usr/bin/config_data to /usr/bin/config_data.diverted by libmodule-build-perl' Adding 'diversion of /usr/share/man/man1/config_data.1.gz to /usr/share/man/man1/config_data.diverted.1.gz by libmodule-build-perl' Unpacking libmodule-build-perl (0.423400-2) ... Selecting previously unselected package libmodule-scandeps-perl. Preparing to unpack .../37-libmodule-scandeps-perl_1.35-1_all.deb ... Unpacking libmodule-scandeps-perl (1.35-1) ... Selecting previously unselected package libyaml-tiny-perl. Preparing to unpack .../38-libyaml-tiny-perl_1.74-1_all.deb ... Unpacking libyaml-tiny-perl (1.74-1) ... Selecting previously unselected package libmodule-install-perl. Preparing to unpack .../39-libmodule-install-perl_1.21-2_all.deb ... Unpacking libmodule-install-perl (1.21-2) ... Selecting previously unselected package libpod-markdown-perl. Preparing to unpack .../40-libpod-markdown-perl_3.400000-1_all.deb ... Unpacking libpod-markdown-perl (3.400000-1) ... Selecting previously unselected package libmodule-install-readmefrompod-perl. Preparing to unpack .../41-libmodule-install-readmefrompod-perl_0.30-4_all.deb ... Unpacking libmodule-install-readmefrompod-perl (0.30-4) ... Setting up libfile-remove-perl (1.61-2) ... Setting up libpipeline1:arm64 (1.5.7-2) ... Setting up libicu72:arm64 (72.1-4+b1) ... Setting up bsdextrautils (2.40-8) ... Setting up libmagic-mgc (1:5.45-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.15.3) ... Setting up libmagic1t64:arm64 (1:5.45-3) ... Setting up gettext-base (0.21-14+b1) ... Setting up m4 (1.4.19-4) ... Setting up file (1:5.45-3) ... Setting up libyaml-tiny-perl (1.74-1) ... Setting up libelf1t64:arm64 (0.191-1+b1) ... Setting up libmodule-build-perl (0.423400-2) ... Setting up autotools-dev (20220109.1) ... Setting up autopoint (0.21-14) ... Setting up libspiffy-perl (0.46-1) ... Setting up autoconf (2.71-3) ... Setting up libcapture-tiny-perl (0.48-2) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.22) ... Setting up libuchardet0:arm64 (0.0.8-1+b1) ... Setting up libsub-override-perl (0.10-1) ... Setting up libxml2:arm64 (2.9.14+dfsg-1.3+b3) ... Setting up libmodule-scandeps-perl (1.35-1) ... Setting up liburi-perl (5.28-1) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.13.1-1) ... Setting up gettext (0.21-14+b1) ... Setting up libtool (2.4.7-7) ... Setting up libio-all-perl (0.87-2) ... Setting up libany-uri-escape-perl (0.01-4) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up libmodule-install-perl (1.21-2) ... Setting up dh-strip-nondeterminism (1.13.1-1) ... Setting up groff-base (1.23.0-4) ... Setting up libpod-markdown-perl (3.400000-1) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up libmodule-install-readmefrompod-perl (0.30-4) ... Setting up man-db (2.12.1-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.15.3) ... Processing triggers for libc-bin (2.38-7) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.33-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/reproducible-path/libmodule-install-rtx-perl-0.43/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libmodule-install-rtx-perl_0.43-1_source.changes dpkg-buildpackage: info: source package libmodule-install-rtx-perl dpkg-buildpackage: info: source version 0.43-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Andrew Ruthven dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 fakeroot debian/rules clean dh clean dh_clean debian/rules build dh build dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libmodule-install-rtx-perl-0.43=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2" "LD=aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libmodule-install-rtx-perl-0.43=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Module::Install::RTx Writing MYMETA.yml and MYMETA.json dh_auto_build make -j12 make[1]: Entering directory '/build/reproducible-path/libmodule-install-rtx-perl-0.43' cp lib/Module/Install/RTx/Runtime.pm blib/lib/Module/Install/RTx/Runtime.pm cp lib/Module/Install/RTx/Remove.pm blib/lib/Module/Install/RTx/Remove.pm cp lib/Module/Install/RTx.pm blib/lib/Module/Install/RTx.pm Manifying 2 pod documents make[1]: Leaving directory '/build/reproducible-path/libmodule-install-rtx-perl-0.43' dh_auto_test make -j12 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libmodule-install-rtx-perl-0.43' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'inc', 'blib/lib', 'blib/arch')" t/*.t t/1-basic.t .. 1..1 ok 1 ok All tests successful. Files=1, Tests=1, 0 wallclock secs ( 0.02 usr 0.01 sys + 0.04 cusr 0.01 csys = 0.08 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libmodule-install-rtx-perl-0.43' create-stamp debian/debhelper-build-stamp fakeroot debian/rules binary dh binary dh_testroot dh_prep dh_auto_install --destdir=debian/libmodule-install-rtx-perl/ make -j12 install DESTDIR=/build/reproducible-path/libmodule-install-rtx-perl-0.43/debian/libmodule-install-rtx-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libmodule-install-rtx-perl-0.43' Manifying 2 pod documents Installing /build/reproducible-path/libmodule-install-rtx-perl-0.43/debian/libmodule-install-rtx-perl/usr/share/perl5/Module/Install/RTx.pm Installing /build/reproducible-path/libmodule-install-rtx-perl-0.43/debian/libmodule-install-rtx-perl/usr/share/perl5/Module/Install/RTx/Remove.pm Installing /build/reproducible-path/libmodule-install-rtx-perl-0.43/debian/libmodule-install-rtx-perl/usr/share/perl5/Module/Install/RTx/Runtime.pm Installing /build/reproducible-path/libmodule-install-rtx-perl-0.43/debian/libmodule-install-rtx-perl/usr/share/man/man3/Module::Install::RTx::Remove.3pm Installing /build/reproducible-path/libmodule-install-rtx-perl-0.43/debian/libmodule-install-rtx-perl/usr/share/man/man3/Module::Install::RTx.3pm make[1]: Leaving directory '/build/reproducible-path/libmodule-install-rtx-perl-0.43' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libmodule-install-rtx-perl' in '../libmodule-install-rtx-perl_0.43-1_all.deb'. dpkg-genbuildinfo --build=binary -O../libmodule-install-rtx-perl_0.43-1_arm64.buildinfo dpkg-genchanges --build=binary -O../libmodule-install-rtx-perl_0.43-1_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: including full source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/557361 and its subdirectories I: Current time: Tue Jun 10 02:12:06 -12 2025 I: pbuilder-time-stamp: 1749564726 Wed May 8 07:49:08 UTC 2024 I: 1st build successful. Starting 2nd build on remote node codethink02-arm64.debian.net. Wed May 8 07:49:08 UTC 2024 I: Preparing to do remote build '2' on codethink02-arm64.debian.net. Wed May 8 07:49:38 UTC 2024 I: Deleting $TMPDIR on codethink02-arm64.debian.net. Wed May 8 07:49:39 UTC 2024 I: libmodule-install-rtx-perl_0.43-1_arm64.changes: Format: 1.8 Date: Fri, 22 Jul 2022 10:38:34 +1200 Source: libmodule-install-rtx-perl Binary: libmodule-install-rtx-perl Architecture: all Version: 0.43-1 Distribution: unstable Urgency: medium Maintainer: Debian Request Tracker Group Changed-By: Andrew Ruthven Description: libmodule-install-rtx-perl - RT extension installer Changes: libmodule-install-rtx-perl (0.43-1) unstable; urgency=medium . * New upstream release * Add myself to Uploaders * New Standards-Version: 4.6.1 Checksums-Sha1: d246120f1dd7b5b4338ca649240941c802141839 19372 libmodule-install-rtx-perl_0.43-1_all.deb 92a4bf09448de37741be0c98545889f1623f8196 5314 libmodule-install-rtx-perl_0.43-1_arm64.buildinfo Checksums-Sha256: fd63a191d44002058b4907ebbd39de7e8bdc0aca14563bf87f6b8c89a4548c0a 19372 libmodule-install-rtx-perl_0.43-1_all.deb 866d439c7f2b238b2bf6c0bf99a0f104917871fe46900b10b6e1c3e0e59f51e7 5314 libmodule-install-rtx-perl_0.43-1_arm64.buildinfo Files: 12ab058d1725567f6d727b298024b6bf 19372 perl optional libmodule-install-rtx-perl_0.43-1_all.deb 8efe3730ba2fd5971f2de4d631273ddc 5314 perl optional libmodule-install-rtx-perl_0.43-1_arm64.buildinfo Wed May 8 07:49:40 UTC 2024 I: diffoscope 265 will be used to compare the two builds: Running as unit: rb-diffoscope-arm64_1-19142.service # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.S1qzYl8t/libmodule-install-rtx-perl_0.43-1.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.S1qzYl8t/libmodule-install-rtx-perl_0.43-1.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.S1qzYl8t/libmodule-install-rtx-perl_0.43-1.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.S1qzYl8t/b1/libmodule-install-rtx-perl_0.43-1_arm64.changes /srv/reproducible-results/rbuild-debian/r-b-build.S1qzYl8t/b2/libmodule-install-rtx-perl_0.43-1_arm64.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.373s) 0.373s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.015s) 0.015s 12 calls diffoscope.comparators.binary.FilesystemFile ## specialize (total time: 0.000s) 0.000s 1 call specialize Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 711ms CPU time consumed: 710ms Wed May 8 07:49:41 UTC 2024 I: diffoscope 265 found no differences in the changes files, and a .buildinfo file also exists. Wed May 8 07:49:41 UTC 2024 I: libmodule-install-rtx-perl from trixie built successfully and reproducibly on arm64. Wed May 8 07:49:42 UTC 2024 I: Submitting .buildinfo files to external archives: Wed May 8 07:49:42 UTC 2024 I: Submitting 8.0K b1/libmodule-install-rtx-perl_0.43-1_arm64.buildinfo.asc Wed May 8 07:49:46 UTC 2024 I: Submitting 8.0K b2/libmodule-install-rtx-perl_0.43-1_arm64.buildinfo.asc Wed May 8 07:49:48 UTC 2024 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Wed May 8 07:49:48 UTC 2024 I: Done submitting .buildinfo files. Wed May 8 07:49:48 UTC 2024 I: Removing signed libmodule-install-rtx-perl_0.43-1_arm64.buildinfo.asc files: removed './b1/libmodule-install-rtx-perl_0.43-1_arm64.buildinfo.asc' removed './b2/libmodule-install-rtx-perl_0.43-1_arm64.buildinfo.asc'