Sun Jun 16 17:27:50 UTC 2024 I: starting to build libconfig-std-perl/trixie/arm64 on jenkins on '2024-06-16 17:27' Sun Jun 16 17:27:50 UTC 2024 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/arm64_22/17395/console.log Sun Jun 16 17:27:50 UTC 2024 I: Downloading source for trixie/libconfig-std-perl=0.903-4 --2024-06-16 17:27:50-- http://deb.debian.org/debian/pool/main/libc/libconfig-std-perl/libconfig-std-perl_0.903-4.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2556 (2.5K) [text/prs.lines.tag] Saving to: ‘libconfig-std-perl_0.903-4.dsc’ 0K .. 100% 297M=0s 2024-06-16 17:27:50 (297 MB/s) - ‘libconfig-std-perl_0.903-4.dsc’ saved [2556/2556] Sun Jun 16 17:27:50 UTC 2024 I: libconfig-std-perl_0.903-4.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: libconfig-std-perl Binary: libconfig-std-perl Architecture: all Version: 0.903-4 Maintainer: Debian Perl Group Uploaders: Damyan Ivanov , Salvatore Bonaccorso , gregor herrmann Homepage: https://metacpan.org/release/Config-Std Standards-Version: 4.6.2 Vcs-Browser: https://salsa.debian.org/perl-team/modules/packages/libconfig-std-perl Vcs-Git: https://salsa.debian.org/perl-team/modules/packages/libconfig-std-perl.git Testsuite: autopkgtest-pkg-perl Build-Depends: debhelper-compat (= 13), libmodule-build-perl Build-Depends-Indep: libclass-std-perl , libtest-pod-coverage-perl , libtest-pod-perl , perl Package-List: libconfig-std-perl deb perl optional arch=all Checksums-Sha1: 5087779f01361b024c4206897bc163e1d017ea86 21667 libconfig-std-perl_0.903.orig.tar.gz 835ee147ccbf5fcd0d0690d202c86af78085196d 4108 libconfig-std-perl_0.903-4.debian.tar.xz Checksums-Sha256: b7709ff663bd279d264ab9c2f51e9e9588479a3367a8c4cfc18659c2a11480fe 21667 libconfig-std-perl_0.903.orig.tar.gz b2c9f00cb92e3242ee40ee5f6ab6660d872569a24f81200f3ff140f380d04012 4108 libconfig-std-perl_0.903-4.debian.tar.xz Files: 7b224f1a4f1a292794ffa625daa31750 21667 libconfig-std-perl_0.903.orig.tar.gz 2749216b8140fdfb0328293f463bbdc8 4108 libconfig-std-perl_0.903-4.debian.tar.xz Dgit: 0c14b35f6d10ba9e7e5f770d72f8c76fcba18ffa debian archive/debian/0.903-4 https://git.dgit.debian.org/libconfig-std-perl -----BEGIN PGP SIGNATURE----- iQKTBAEBCgB9FiEE0eExbpOnYKgQTYX6uzpoAYZJqgYFAmXm/v5fFIAAAAAALgAo aXNzdWVyLWZwckBub3RhdGlvbnMub3BlbnBncC5maWZ0aGhvcnNlbWFuLm5ldEQx RTEzMTZFOTNBNzYwQTgxMDREODVGQUJCM0E2ODAxODY0OUFBMDYACgkQuzpoAYZJ qgYrpRAApaaLgb751FSYZxsEKL02iyCwaQWRxjXGaDxaV1s0dOeGyAcyGAcUo/hs m2RllKdu4C20430Y7QREkrTYKYe3N4pVgUydc5YHH8X5SkV/I8NhLaT5rzHAdZ4V iFAAS0S8ldd0xxPVVL7hgrBjP6vrkfUY/uk9lIvDQImwPHrq0YDCuWRPC9pT0YLN XSwA9z4ql6fVnytCbnV5x5p9jQUUg27oF5zb2kBvvkXBe9Ex+Um0PYbNjtAqSAiG /F+ZqGMiAG2KOiHLte9iqjdtvFEVBbYnuLRKbG0BND86WGTTrxbKkfVeSMGdZMSJ FQOFRvzCRbBSGx+fkol0yJKNZLxMgaFpDcY6K2W8HJxjL9rNipt5E0thjuVMYzks Sf1X/OV20ldZz3KbaOfaYWZZ4XmyhrWjZsiHNvqIgq7gdYb/9On5/EPUsbp5rCXn 5sg7Ng+o4UMpgsn9MJHkgctlO/7OG85RUQi322lloH2QAiQiBnaoL2GYAT+qQ94u /slyZwrNH/0i0WxnHylfPyU7Kvxjla4QvBTms/B/ckdyn8L9qvSqB8MgqsZ/YcKV 1/SmPj8YAtZ7ux1S+vKiZTOQsMbK1dgjfQ7lbXVZVZcpa8qMtVKuicL189gDAz90 ipyKxVQcZl9b/lFtVN46V/huIe0ymNQKmPuAAXCANXI/K9Zet0Y= =M5uN -----END PGP SIGNATURE----- Sun Jun 16 17:27:50 UTC 2024 I: Checking whether the package is not for us Sun Jun 16 17:27:50 UTC 2024 I: Starting 1st build on remote node codethink04-arm64.debian.net. Sun Jun 16 17:27:50 UTC 2024 I: Preparing to do remote build '1' on codethink04-arm64.debian.net. Sun Jun 16 17:28:24 UTC 2024 I: Deleting $TMPDIR on codethink04-arm64.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Sun Jun 16 05:27:53 -12 2024 I: pbuilder-time-stamp: 1718558873 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libconfig-std-perl_0.903-4.dsc] I: copying [./libconfig-std-perl_0.903.orig.tar.gz] I: copying [./libconfig-std-perl_0.903-4.debian.tar.xz] I: Extracting source gpgv: Signature made Tue Mar 5 11:16:14 2024 gpgv: using RSA key D1E1316E93A760A8104D85FABB3A68018649AA06 gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./libconfig-std-perl_0.903-4.dsc: no acceptable signature found dpkg-source: info: extracting libconfig-std-perl in libconfig-std-perl-0.903 dpkg-source: info: unpacking libconfig-std-perl_0.903.orig.tar.gz dpkg-source: info: unpacking libconfig-std-perl_0.903-4.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying spelling-error-in-manpage.patch I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/2969817/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='arm64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='arm64' IFS=' ' INVOCATION_ID='bf788a8394e14172bd291a14b5c1673a' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='2969817' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.62W5fb4o/pbuilderrc_rhqo --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.62W5fb4o/b1 --logfile b1/build.log libconfig-std-perl_0.903-4.dsc' SUDO_GID='109' SUDO_UID='104' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://192.168.101.4:3128' I: uname -a Linux codethink04-arm64 6.1.0-21-cloud-arm64 #1 SMP Debian 6.1.90-1 (2024-05-03) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Jun 5 22:35 /bin -> usr/bin I: user script /srv/workspace/pbuilder/2969817/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), libmodule-build-perl, libclass-std-perl, libtest-pod-coverage-perl, libtest-pod-perl, perl dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19743 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libmodule-build-perl; however: Package libmodule-build-perl is not installed. pbuilder-satisfydepends-dummy depends on libclass-std-perl; however: Package libclass-std-perl is not installed. pbuilder-satisfydepends-dummy depends on libtest-pod-coverage-perl; however: Package libtest-pod-coverage-perl is not installed. pbuilder-satisfydepends-dummy depends on libtest-pod-perl; however: Package libtest-pod-perl is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libclass-std-perl{a} libdebhelper-perl{a} libdevel-symdump-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libicu72{a} libmagic-mgc{a} libmagic1t64{a} libmodule-build-perl{a} libpipeline1{a} libpod-coverage-perl{a} libpod-parser-perl{a} libtest-pod-coverage-perl{a} libtest-pod-perl{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl libmodule-signature-perl libpod-readme-perl libsoftware-license-perl lynx wget 0 packages upgraded, 36 newly installed, 0 to remove and 0 not upgraded. Need to get 19.1 MB of archives. After unpacking 77.0 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main arm64 sensible-utils all 0.0.22 [22.4 kB] Get: 2 http://deb.debian.org/debian trixie/main arm64 libmagic-mgc arm64 1:5.45-3 [314 kB] Get: 3 http://deb.debian.org/debian trixie/main arm64 libmagic1t64 arm64 1:5.45-3 [100 kB] Get: 4 http://deb.debian.org/debian trixie/main arm64 file arm64 1:5.45-3 [43.0 kB] Get: 5 http://deb.debian.org/debian trixie/main arm64 gettext-base arm64 0.21-14+b1 [160 kB] Get: 6 http://deb.debian.org/debian trixie/main arm64 libuchardet0 arm64 0.0.8-1+b1 [69.0 kB] Get: 7 http://deb.debian.org/debian trixie/main arm64 groff-base arm64 1.23.0-4 [1130 kB] Get: 8 http://deb.debian.org/debian trixie/main arm64 bsdextrautils arm64 2.40.1-8.1 [95.1 kB] Get: 9 http://deb.debian.org/debian trixie/main arm64 libpipeline1 arm64 1.5.7-2 [36.5 kB] Get: 10 http://deb.debian.org/debian trixie/main arm64 man-db arm64 2.12.1-2 [1394 kB] Get: 11 http://deb.debian.org/debian trixie/main arm64 m4 arm64 1.4.19-4 [277 kB] Get: 12 http://deb.debian.org/debian trixie/main arm64 autoconf all 2.71-3 [332 kB] Get: 13 http://deb.debian.org/debian trixie/main arm64 autotools-dev all 20220109.1 [51.6 kB] Get: 14 http://deb.debian.org/debian trixie/main arm64 automake all 1:1.16.5-1.3 [823 kB] Get: 15 http://deb.debian.org/debian trixie/main arm64 autopoint all 0.21-14 [496 kB] Get: 16 http://deb.debian.org/debian trixie/main arm64 libdebhelper-perl all 13.15.3 [88.0 kB] Get: 17 http://deb.debian.org/debian trixie/main arm64 libtool all 2.4.7-7 [517 kB] Get: 18 http://deb.debian.org/debian trixie/main arm64 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian trixie/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian trixie/main arm64 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get: 21 http://deb.debian.org/debian trixie/main arm64 dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get: 22 http://deb.debian.org/debian trixie/main arm64 libelf1t64 arm64 0.191-1+b1 [187 kB] Get: 23 http://deb.debian.org/debian trixie/main arm64 dwz arm64 0.15-1+b1 [102 kB] Get: 24 http://deb.debian.org/debian trixie/main arm64 libicu72 arm64 72.1-4+b1 [9224 kB] Get: 25 http://deb.debian.org/debian trixie/main arm64 libxml2 arm64 2.9.14+dfsg-1.3+b3 [624 kB] Get: 26 http://deb.debian.org/debian trixie/main arm64 gettext arm64 0.21-14+b1 [1249 kB] Get: 27 http://deb.debian.org/debian trixie/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian trixie/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian trixie/main arm64 debhelper all 13.15.3 [901 kB] Get: 30 http://deb.debian.org/debian trixie/main arm64 libclass-std-perl all 0.013-3 [45.6 kB] Get: 31 http://deb.debian.org/debian trixie/main arm64 libdevel-symdump-perl all 2.18-5 [15.8 kB] Get: 32 http://deb.debian.org/debian trixie/main arm64 libmodule-build-perl all 0.423400-2 [252 kB] Get: 33 http://deb.debian.org/debian trixie/main arm64 libpod-parser-perl all 1.67-1 [94.1 kB] Get: 34 http://deb.debian.org/debian trixie/main arm64 libpod-coverage-perl all 0.23-2 [22.1 kB] Get: 35 http://deb.debian.org/debian trixie/main arm64 libtest-pod-coverage-perl all 1.10-3 [14.9 kB] Get: 36 http://deb.debian.org/debian trixie/main arm64 libtest-pod-perl all 1.52-3 [12.6 kB] Fetched 19.1 MB in 0s (107 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19743 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.22_all.deb ... Unpacking sensible-utils (0.0.22) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3_arm64.deb ... Unpacking libmagic-mgc (1:5.45-3) ... Selecting previously unselected package libmagic1t64:arm64. Preparing to unpack .../02-libmagic1t64_1%3a5.45-3_arm64.deb ... Unpacking libmagic1t64:arm64 (1:5.45-3) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-3_arm64.deb ... Unpacking file (1:5.45-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.21-14+b1_arm64.deb ... Unpacking gettext-base (0.21-14+b1) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../05-libuchardet0_0.0.8-1+b1_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.8-1+b1) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-4_arm64.deb ... Unpacking groff-base (1.23.0-4) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.40.1-8.1_arm64.deb ... Unpacking bsdextrautils (2.40.1-8.1) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../08-libpipeline1_1.5.7-2_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.7-2) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.12.1-2_arm64.deb ... Unpacking man-db (2.12.1-2) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-4_arm64.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.71-3_all.deb ... Unpacking autoconf (2.71-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.21-14_all.deb ... Unpacking autopoint (0.21-14) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.15.3_all.deb ... Unpacking libdebhelper-perl (13.15.3) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.4.7-7_all.deb ... Unpacking libtool (2.4.7-7) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:arm64. Preparing to unpack .../21-libelf1t64_0.191-1+b1_arm64.deb ... Unpacking libelf1t64:arm64 (0.191-1+b1) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b1_arm64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libicu72:arm64. Preparing to unpack .../23-libicu72_72.1-4+b1_arm64.deb ... Unpacking libicu72:arm64 (72.1-4+b1) ... Selecting previously unselected package libxml2:arm64. Preparing to unpack .../24-libxml2_2.9.14+dfsg-1.3+b3_arm64.deb ... Unpacking libxml2:arm64 (2.9.14+dfsg-1.3+b3) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.21-14+b1_arm64.deb ... Unpacking gettext (0.21-14+b1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.15.3_all.deb ... Unpacking debhelper (13.15.3) ... Selecting previously unselected package libclass-std-perl. Preparing to unpack .../29-libclass-std-perl_0.013-3_all.deb ... Unpacking libclass-std-perl (0.013-3) ... Selecting previously unselected package libdevel-symdump-perl. Preparing to unpack .../30-libdevel-symdump-perl_2.18-5_all.deb ... Unpacking libdevel-symdump-perl (2.18-5) ... Selecting previously unselected package libmodule-build-perl. Preparing to unpack .../31-libmodule-build-perl_0.423400-2_all.deb ... Adding 'diversion of /usr/bin/config_data to /usr/bin/config_data.diverted by libmodule-build-perl' Adding 'diversion of /usr/share/man/man1/config_data.1.gz to /usr/share/man/man1/config_data.diverted.1.gz by libmodule-build-perl' Unpacking libmodule-build-perl (0.423400-2) ... Selecting previously unselected package libpod-parser-perl. Preparing to unpack .../32-libpod-parser-perl_1.67-1_all.deb ... Adding 'diversion of /usr/bin/podselect to /usr/bin/podselect.bundled by libpod-parser-perl' Adding 'diversion of /usr/share/man/man1/podselect.1.gz to /usr/share/man/man1/podselect.bundled.1.gz by libpod-parser-perl' Unpacking libpod-parser-perl (1.67-1) ... Selecting previously unselected package libpod-coverage-perl. Preparing to unpack .../33-libpod-coverage-perl_0.23-2_all.deb ... Unpacking libpod-coverage-perl (0.23-2) ... Selecting previously unselected package libtest-pod-coverage-perl. Preparing to unpack .../34-libtest-pod-coverage-perl_1.10-3_all.deb ... Unpacking libtest-pod-coverage-perl (1.10-3) ... Selecting previously unselected package libtest-pod-perl. Preparing to unpack .../35-libtest-pod-perl_1.52-3_all.deb ... Unpacking libtest-pod-perl (1.52-3) ... Setting up libpipeline1:arm64 (1.5.7-2) ... Setting up libicu72:arm64 (72.1-4+b1) ... Setting up bsdextrautils (2.40.1-8.1) ... Setting up libmagic-mgc (1:5.45-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.15.3) ... Setting up libmagic1t64:arm64 (1:5.45-3) ... Setting up libtest-pod-perl (1.52-3) ... Setting up gettext-base (0.21-14+b1) ... Setting up m4 (1.4.19-4) ... Setting up file (1:5.45-3) ... Setting up libelf1t64:arm64 (0.191-1+b1) ... Setting up libmodule-build-perl (0.423400-2) ... Setting up autotools-dev (20220109.1) ... Setting up libpod-parser-perl (1.67-1) ... Setting up autopoint (0.21-14) ... Setting up autoconf (2.71-3) ... Setting up libclass-std-perl (0.013-3) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.22) ... Setting up libuchardet0:arm64 (0.0.8-1+b1) ... Setting up libdevel-symdump-perl (2.18-5) ... Setting up libxml2:arm64 (2.9.14+dfsg-1.3+b3) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up gettext (0.21-14+b1) ... Setting up libtool (2.4.7-7) ... Setting up libpod-coverage-perl (0.23-2) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up groff-base (1.23.0-4) ... Setting up libtest-pod-coverage-perl (1.10-3) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.12.1-2) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.15.3) ... Processing triggers for libc-bin (2.38-13) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/reproducible-path/libconfig-std-perl-0.903/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libconfig-std-perl_0.903-4_source.changes dpkg-buildpackage: info: source package libconfig-std-perl dpkg-buildpackage: info: source version 0.903-4 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by gregor herrmann dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Build.PL --installdirs vendor --config "optimize=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libconfig-std-perl-0.903=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2" --config "ld=aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libconfig-std-perl-0.903=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro" Checking prerequisites... recommends: * Test::Distribution is not installed ERRORS/WARNINGS FOUND IN PREREQUISITES. You may wish to install the versions of the modules indicated above before proceeding with this installation Run 'Build installdeps' to install missing prerequisites. Created MYMETA.yml and MYMETA.json Creating new 'Build' script for 'Config-Std' version '0.903' dh_auto_build /usr/bin/perl Build Building Config-Std dh_auto_test /usr/bin/perl Build test --verbose 1 # Testing Config::Std 0.903 t/00.load.t ......... 1..1 ok 1 - use Config::Std; ok t/00write.t ......... ok 1 - Write succeeded ok 2 - File created ok 3 - File read ok 4 - DATA loaded ok 5 - Content correct 1..5 ok t/01read.t .......... ok 1 - Read succeeded ok 2 - Data correct 1..2 ok t/01read_renamed.t .. ok 1 - Read succeeded ok 2 - Data correct 1..2 ok t/02rewrite.t ....... ok 1 - Read succeeded ok 2 - Data correct ok 3 - Write succeeded ok 4 - File opened ok 5 - File read ok 6 - DATA loaded ok 7 - Extra content correct 1..7 ok t/02rewrite_eq.t .... ok 1 - Read succeeded ok 2 - Write succeeded ok 3 - File opened ok 4 - File read ok 5 - DATA loaded ok 6 - Extra content correct 1..6 ok t/03autoviv.t ....... ok 1 - Mutation via hash ok 2 - Mutation via hash-ref 1..2 ok t/comments.t ........ ok 1 - Comments preserved on simple round-trip ok 2 - Comments preserved on mutating round-trip 1..2 ok t/pod-coverage.t .... 1..1 ok 1 - Pod coverage on Config::Std ok t/pod.t ............. 1..1 ok 1 - POD test for blib/lib/Config/Std.pm ok t/undef.t ........... ok 1 - Write failed as expected ok 2 - Failed with expected exception 1..2 ok All tests successful. Files=11, Tests=31, 1 wallclock secs ( 0.06 usr 0.03 sys + 0.98 cusr 0.19 csys = 1.26 CPU) Result: PASS create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libconfig-std-perl/ /usr/bin/perl Build install --destdir /build/reproducible-path/libconfig-std-perl-0.903/debian/libconfig-std-perl --create_packlist 0 Building Config-Std Installing /build/reproducible-path/libconfig-std-perl-0.903/debian/libconfig-std-perl/usr/share/perl5/Config/Std.pm Installing /build/reproducible-path/libconfig-std-perl-0.903/debian/libconfig-std-perl/usr/share/man/man3/Config::Std.3pm dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libconfig-std-perl' in '../libconfig-std-perl_0.903-4_all.deb'. dpkg-genbuildinfo --build=binary -O../libconfig-std-perl_0.903-4_arm64.buildinfo dpkg-genchanges --build=binary -O../libconfig-std-perl_0.903-4_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/2969817 and its subdirectories I: Current time: Sun Jun 16 05:28:23 -12 2024 I: pbuilder-time-stamp: 1718558903 Sun Jun 16 17:28:25 UTC 2024 I: 1st build successful. Starting 2nd build on remote node codethink02-arm64.debian.net. Sun Jun 16 17:28:25 UTC 2024 I: Preparing to do remote build '2' on codethink02-arm64.debian.net. Sun Jun 16 17:29:07 UTC 2024 I: Deleting $TMPDIR on codethink02-arm64.debian.net. Sun Jun 16 17:29:08 UTC 2024 I: libconfig-std-perl_0.903-4_arm64.changes: Format: 1.8 Date: Tue, 05 Mar 2024 12:06:54 +0100 Source: libconfig-std-perl Binary: libconfig-std-perl Architecture: all Version: 0.903-4 Distribution: unstable Urgency: medium Maintainer: Debian Perl Group Changed-By: gregor herrmann Description: libconfig-std-perl - Load and save configuration files in a standard format Closes: 1046200 Changes: libconfig-std-perl (0.903-4) unstable; urgency=medium . [ Debian Janitor ] * Bump debhelper from old 12 to 13. . [ gregor herrmann ] * Remove generated test file via debian/clean. (Closes: #1046200) * Update years of packaging copyright. * Declare compliance with Debian Policy 4.6.2. * Set Rules-Requires-Root: no. * Annotate test-only build dependencies with . Checksums-Sha1: c050cbd0c8f5b6bedff147b55698f4e7a27ace20 22688 libconfig-std-perl_0.903-4_all.deb 425c4ecb6baf35719c12a1c9c57ecdf8215ad96a 4980 libconfig-std-perl_0.903-4_arm64.buildinfo Checksums-Sha256: b6b720c1ab0f98a65857a5b7962f5d356be271c2b4c833cc5cb849c27f999584 22688 libconfig-std-perl_0.903-4_all.deb f55bc227fd5ec013102f1102afe3769a26dc6b9a98574e29c70dd5d18378f1e3 4980 libconfig-std-perl_0.903-4_arm64.buildinfo Files: 09ad18cac13c01300ad78183a2368543 22688 perl optional libconfig-std-perl_0.903-4_all.deb a1248b0290183e6c719625029894853a 4980 perl optional libconfig-std-perl_0.903-4_arm64.buildinfo Sun Jun 16 17:29:09 UTC 2024 I: diffoscope 271 will be used to compare the two builds: Running as unit: rb-diffoscope-arm64_22-17395.service Warning: program compiled against libxml 212 using older 209 # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.62W5fb4o/libconfig-std-perl_0.903-4.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.62W5fb4o/libconfig-std-perl_0.903-4.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.62W5fb4o/libconfig-std-perl_0.903-4.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.62W5fb4o/b1/libconfig-std-perl_0.903-4_arm64.changes /srv/reproducible-results/rbuild-debian/r-b-build.62W5fb4o/b2/libconfig-std-perl_0.903-4_arm64.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.381s) 0.381s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.016s) 0.016s 12 calls diffoscope.comparators.binary.FilesystemFile ## specialize (total time: 0.000s) 0.000s 1 call specialize Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 739ms CPU time consumed: 740ms Sun Jun 16 17:29:10 UTC 2024 I: diffoscope 271 found no differences in the changes files, and a .buildinfo file also exists. Sun Jun 16 17:29:10 UTC 2024 I: libconfig-std-perl from trixie built successfully and reproducibly on arm64. Sun Jun 16 17:29:11 UTC 2024 I: Submitting .buildinfo files to external archives: Sun Jun 16 17:29:11 UTC 2024 I: Submitting 8.0K b1/libconfig-std-perl_0.903-4_arm64.buildinfo.asc Sun Jun 16 17:29:12 UTC 2024 I: Submitting 8.0K b2/libconfig-std-perl_0.903-4_arm64.buildinfo.asc Sun Jun 16 17:29:13 UTC 2024 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Sun Jun 16 17:29:13 UTC 2024 I: Done submitting .buildinfo files. Sun Jun 16 17:29:13 UTC 2024 I: Removing signed libconfig-std-perl_0.903-4_arm64.buildinfo.asc files: removed './b1/libconfig-std-perl_0.903-4_arm64.buildinfo.asc' removed './b2/libconfig-std-perl_0.903-4_arm64.buildinfo.asc'