Mon Nov 18 06:47:43 UTC 2024 I: starting to build insserv/trixie/arm64 on jenkins on '2024-11-18 06:47' Mon Nov 18 06:47:43 UTC 2024 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/arm64_19/44661/console.log Mon Nov 18 06:47:43 UTC 2024 I: Downloading source for trixie/insserv=1.25.0-1 --2024-11-18 06:47:43-- http://deb.debian.org/debian/pool/main/i/insserv/insserv_1.25.0-1.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 1957 (1.9K) [text/prs.lines.tag] Saving to: ‘insserv_1.25.0-1.dsc’ 0K . 100% 193M=0s 2024-11-18 06:47:43 (193 MB/s) - ‘insserv_1.25.0-1.dsc’ saved [1957/1957] Mon Nov 18 06:47:43 UTC 2024 I: insserv_1.25.0-1.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Format: 3.0 (quilt) Source: insserv Binary: insserv Architecture: any Version: 1.25.0-1 Maintainer: Debian sysvinit maintainers Uploaders: Mark Hindley , Homepage: https://github.com/slicer69/insserv Standards-Version: 4.7.0 Vcs-Browser: https://salsa.debian.org/debian/insserv Vcs-Git: https://salsa.debian.org/debian/insserv.git Testsuite: autopkgtest Build-Depends: bash-completion, debhelper-compat (= 13), po-debconf Package-List: insserv deb misc optional arch=any Checksums-Sha1: 794228dcb070f0a9e59f8ca2639792d926d13c92 76802 insserv_1.25.0.orig.tar.gz 5b70d272ac64f380004f302e0f49408577f8f035 36420 insserv_1.25.0-1.debian.tar.xz Checksums-Sha256: 5653830eeefd2ac792d0e3a0570b15b10689b07874f685ee9550e8337bd90149 76802 insserv_1.25.0.orig.tar.gz c1f0c6380504fa93802921338e063c9d6d3945d5752e36d64f9b62de3246991b 36420 insserv_1.25.0-1.debian.tar.xz Files: 4132831d6f4042949b6069bd76a5404f 76802 insserv_1.25.0.orig.tar.gz 67b3253394453efc1dff1eb23fd3db45 36420 insserv_1.25.0-1.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQIzBAEBCAAdFiEEUGwVpCsK9aCoVCPu0opFvzKH1kkFAmbGKWYACgkQ0opFvzKH 1klRDw/+NuKj5SIY2u4rLrPV7T0AUICkVwhQqZgkc416FIRZsAXEktpCD+kH2Bmw YtsvpXik3+MRoxvztFSqlL8VHfM+lnIC5zj1iZIMQwtQ8Ng6fdmsmOV4gQEDOL1d oj1XhLYDVxtijPftqNc6F7K6XUsJacEodZN0o5d1VCjIM3pjmnYYP/QcSPcaMUxl mx+vpG3f3yekA8uiJHjKiLrzwJWbmU2XP7DsyVO60UZHkoXr4Jr8JLwNEBlaSmth 1yHeCOUMKRpx59+pbC+jrNoLpg4r5QuW6M5jlWD/eq57Lr1kFOBxs6iX2FtYbtCd VmKGi8djVnocxiQaDX1eXAFB2HLz6yeUUG0uvn8Phr8NoP8WbiiZ+dBWgpS/y1+z W75psaFGnxU/EznUUsLKaqegKvlSRu/Xk5CKaQjNLZIkCq3fyCTZqHywL9INJvwj p1Ra8VDtWCqJQTxoh4WOnyHU+RmBX+aCskWjtxzKjJ9JcEjbe9SztjyAHk66jgOy omAl99VXic22mcHTsktSBgWgFkLr8CvHOcVf0zU8HHB8789eLYXVH94RubFvIOn2 /dJKbr/hMGzk1R1exiHysGZ4NoJFeRcAK34dMAkl98Yo1jJq+dNw8aDHHvxhKJMK o7QoeLW+Suh9hT4ul83dViAlFAna2ngtEw9GF8/yRQF50vylwSY= =i0Kd -----END PGP SIGNATURE----- Mon Nov 18 06:47:43 UTC 2024 I: Checking whether the package is not for us Mon Nov 18 06:47:43 UTC 2024 I: Starting 1st build on remote node codethink02-arm64.debian.net. Mon Nov 18 06:47:43 UTC 2024 I: Preparing to do remote build '1' on codethink02-arm64.debian.net. Mon Nov 18 06:48:19 UTC 2024 I: Deleting $TMPDIR on codethink02-arm64.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Sun Nov 17 18:47:45 -12 2024 I: pbuilder-time-stamp: 1731912465 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [insserv_1.25.0-1.dsc] I: copying [./insserv_1.25.0.orig.tar.gz] I: copying [./insserv_1.25.0-1.debian.tar.xz] I: Extracting source gpgv: Signature made Wed Aug 21 17:52:38 2024 gpgv: using RSA key 506C15A42B0AF5A0A85423EED28A45BF3287D649 gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./insserv_1.25.0-1.dsc: no acceptable signature found dpkg-source: info: extracting insserv in insserv-1.25.0 dpkg-source: info: unpacking insserv_1.25.0.orig.tar.gz dpkg-source: info: unpacking insserv_1.25.0-1.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying 0001-Ignore-flaky-upstream-testsuite-failures-pending-ups.patch dpkg-source: info: applying 11_debian_conf.patch dpkg-source: info: applying 110_portmap.patch dpkg-source: info: applying warn_in_ignore_mode.patch dpkg-source: info: applying 0004-Fix-spurious-warnings-about-unknown-virtual-dependen.patch dpkg-source: info: applying 0005-Fix-spelling-error-in-manpage.patch I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/3027181/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='arm64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='arm64' IFS=' ' INVOCATION_ID='0a2ddb78f77f45a8a76236fd56017db1' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='3027181' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.SGEpfK3k/pbuilderrc_GePc --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.SGEpfK3k/b1 --logfile b1/build.log insserv_1.25.0-1.dsc' SUDO_GID='109' SUDO_UID='104' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://192.168.101.4:3128' I: uname -a Linux codethink02-arm64 6.1.0-27-cloud-arm64 #1 SMP Debian 6.1.115-1 (2024-11-01) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Aug 4 21:30 /bin -> usr/bin I: user script /srv/workspace/pbuilder/3027181/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: bash-completion, debhelper-compat (= 13), po-debconf dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 20088 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on bash-completion; however: Package bash-completion is not installed. pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on po-debconf; however: Package po-debconf is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bash-completion{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libicu72{a} libmagic-mgc{a} libmagic1t64{a} libpipeline1{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 30 newly installed, 0 to remove and 0 not upgraded. Need to get 19.7 MB of archives. After unpacking 79.7 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main arm64 sensible-utils all 0.0.24 [24.8 kB] Get: 2 http://deb.debian.org/debian trixie/main arm64 bash-completion all 1:2.14.0-2 [310 kB] Get: 3 http://deb.debian.org/debian trixie/main arm64 libmagic-mgc arm64 1:5.45-3+b1 [314 kB] Get: 4 http://deb.debian.org/debian trixie/main arm64 libmagic1t64 arm64 1:5.45-3+b1 [102 kB] Get: 5 http://deb.debian.org/debian trixie/main arm64 file arm64 1:5.45-3+b1 [43.4 kB] Get: 6 http://deb.debian.org/debian trixie/main arm64 gettext-base arm64 0.22.5-2 [198 kB] Get: 7 http://deb.debian.org/debian trixie/main arm64 libuchardet0 arm64 0.0.8-1+b2 [69.2 kB] Get: 8 http://deb.debian.org/debian trixie/main arm64 groff-base arm64 1.23.0-5 [1129 kB] Get: 9 http://deb.debian.org/debian trixie/main arm64 bsdextrautils arm64 2.40.2-11 [91.2 kB] Get: 10 http://deb.debian.org/debian trixie/main arm64 libpipeline1 arm64 1.5.8-1 [40.2 kB] Get: 11 http://deb.debian.org/debian trixie/main arm64 man-db arm64 2.13.0-1 [1404 kB] Get: 12 http://deb.debian.org/debian trixie/main arm64 m4 arm64 1.4.19-4 [277 kB] Get: 13 http://deb.debian.org/debian trixie/main arm64 autoconf all 2.72-3 [493 kB] Get: 14 http://deb.debian.org/debian trixie/main arm64 autotools-dev all 20220109.1 [51.6 kB] Get: 15 http://deb.debian.org/debian trixie/main arm64 automake all 1:1.16.5-1.3 [823 kB] Get: 16 http://deb.debian.org/debian trixie/main arm64 autopoint all 0.22.5-2 [723 kB] Get: 17 http://deb.debian.org/debian trixie/main arm64 libdebhelper-perl all 13.20 [89.7 kB] Get: 18 http://deb.debian.org/debian trixie/main arm64 libtool all 2.4.7-8 [517 kB] Get: 19 http://deb.debian.org/debian trixie/main arm64 dh-autoreconf all 20 [17.1 kB] Get: 20 http://deb.debian.org/debian trixie/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 21 http://deb.debian.org/debian trixie/main arm64 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get: 22 http://deb.debian.org/debian trixie/main arm64 dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get: 23 http://deb.debian.org/debian trixie/main arm64 libelf1t64 arm64 0.192-4 [189 kB] Get: 24 http://deb.debian.org/debian trixie/main arm64 dwz arm64 0.15-1+b1 [102 kB] Get: 25 http://deb.debian.org/debian trixie/main arm64 libicu72 arm64 72.1-5+b1 [9239 kB] Get: 26 http://deb.debian.org/debian trixie/main arm64 libxml2 arm64 2.12.7+dfsg+really2.9.14-0.2+b1 [630 kB] Get: 27 http://deb.debian.org/debian trixie/main arm64 gettext arm64 0.22.5-2 [1532 kB] Get: 28 http://deb.debian.org/debian trixie/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 29 http://deb.debian.org/debian trixie/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 30 http://deb.debian.org/debian trixie/main arm64 debhelper all 13.20 [915 kB] Fetched 19.7 MB in 0s (181 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20088 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package bash-completion. Preparing to unpack .../01-bash-completion_1%3a2.14.0-2_all.deb ... Unpacking bash-completion (1:2.14.0-2) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../02-libmagic-mgc_1%3a5.45-3+b1_arm64.deb ... Unpacking libmagic-mgc (1:5.45-3+b1) ... Selecting previously unselected package libmagic1t64:arm64. Preparing to unpack .../03-libmagic1t64_1%3a5.45-3+b1_arm64.deb ... Unpacking libmagic1t64:arm64 (1:5.45-3+b1) ... Selecting previously unselected package file. Preparing to unpack .../04-file_1%3a5.45-3+b1_arm64.deb ... Unpacking file (1:5.45-3+b1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../05-gettext-base_0.22.5-2_arm64.deb ... Unpacking gettext-base (0.22.5-2) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../06-libuchardet0_0.0.8-1+b2_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../07-groff-base_1.23.0-5_arm64.deb ... Unpacking groff-base (1.23.0-5) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../08-bsdextrautils_2.40.2-11_arm64.deb ... Unpacking bsdextrautils (2.40.2-11) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../09-libpipeline1_1.5.8-1_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../10-man-db_2.13.0-1_arm64.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../11-m4_1.4.19-4_arm64.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../12-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../13-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../14-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../15-autopoint_0.22.5-2_all.deb ... Unpacking autopoint (0.22.5-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../16-libdebhelper-perl_13.20_all.deb ... Unpacking libdebhelper-perl (13.20) ... Selecting previously unselected package libtool. Preparing to unpack .../17-libtool_2.4.7-8_all.deb ... Unpacking libtool (2.4.7-8) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../18-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../19-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../20-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../21-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:arm64. Preparing to unpack .../22-libelf1t64_0.192-4_arm64.deb ... Unpacking libelf1t64:arm64 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../23-dwz_0.15-1+b1_arm64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libicu72:arm64. Preparing to unpack .../24-libicu72_72.1-5+b1_arm64.deb ... Unpacking libicu72:arm64 (72.1-5+b1) ... Selecting previously unselected package libxml2:arm64. Preparing to unpack .../25-libxml2_2.12.7+dfsg+really2.9.14-0.2+b1_arm64.deb ... Unpacking libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Selecting previously unselected package gettext. Preparing to unpack .../26-gettext_0.22.5-2_arm64.deb ... Unpacking gettext (0.22.5-2) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../27-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../28-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../29-debhelper_13.20_all.deb ... Unpacking debhelper (13.20) ... Setting up libpipeline1:arm64 (1.5.8-1) ... Setting up libicu72:arm64 (72.1-5+b1) ... Setting up bsdextrautils (2.40.2-11) ... Setting up libmagic-mgc (1:5.45-3+b1) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.20) ... Setting up libmagic1t64:arm64 (1:5.45-3+b1) ... Setting up gettext-base (0.22.5-2) ... Setting up m4 (1.4.19-4) ... Setting up file (1:5.45-3+b1) ... Setting up libelf1t64:arm64 (0.192-4) ... Setting up autotools-dev (20220109.1) ... Setting up bash-completion (1:2.14.0-2) ... Setting up autopoint (0.22.5-2) ... Setting up autoconf (2.72-3) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:arm64 (0.0.8-1+b2) ... Setting up libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up gettext (0.22.5-2) ... Setting up libtool (2.4.7-8) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up groff-base (1.23.0-5) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.20) ... Processing triggers for libc-bin (2.40-3) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.36-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/reproducible-path/insserv-1.25.0/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../insserv_1.25.0-1_source.changes dpkg-buildpackage: info: source package insserv dpkg-buildpackage: info: source version 1.25.0-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Mark Hindley dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 fakeroot debian/rules clean echo -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/insserv-1.25.0=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/insserv-1.25.0=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard dh clean --with=bash-completion dh_auto_clean make -j12 distclean make[1]: Entering directory '/build/reproducible-path/insserv-1.25.0' rm -f *.o *~ insserv insserv.8 config.h .depend.* .system rm -f insserv-1.25.0.tar.xz insserv-1.25.0.tar.xz.sig rm -f insserv rm -rf tests/root make[1]: Leaving directory '/build/reproducible-path/insserv-1.25.0' dh_clean debian/rules build echo -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/insserv-1.25.0=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/insserv-1.25.0=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard dh build --with=bash-completion dh_update_autotools_config dh_autoreconf dh_auto_configure dh_auto_build make -j12 "INSTALL=install --strip-program=true" make[1]: Entering directory '/build/reproducible-path/insserv-1.25.0' sed -r '\!@@BEGIN_SUSE@@!,\!@@(ELSE|END)_SUSE@@!d;\!@@(NOT|END)_SUSE@@!d' < insserv.8.in > insserv.8 cc -W -Wall -Wunreachable-code -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/insserv-1.25.0=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2 -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -DINITDIR=\"/etc/init.d\" -DINSCONF=\"/etc/insserv.conf\" -pipe -c map.c cc -W -Wall -Wunreachable-code -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/insserv-1.25.0=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2 -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -DINITDIR=\"/etc/init.d\" -DINSCONF=\"/etc/insserv.conf\" -pipe -c listing.c cc -W -Wall -Wunreachable-code -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/insserv-1.25.0=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2 -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -DINITDIR=\"/etc/init.d\" -DINSCONF=\"/etc/insserv.conf\" -pipe insserv.c -c insserv.c: In function 'main': insserv.c:2929:20: warning: ignoring return value of 'asprintf' declared with attribute 'warn_unused_result' [-Wunused-result] 2929 | asprintf(&dependency_path, "%s/.", optarg); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ insserv.c:2933:20: warning: ignoring return value of 'getcwd' declared with attribute 'warn_unused_result' [-Wunused-result] 2933 | getcwd(current_dir, PATH_MAX); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ insserv.c:2934:20: warning: ignoring return value of 'asprintf' declared with attribute 'warn_unused_result' [-Wunused-result] 2934 | asprintf(&dependency_path, "%s/%s/.", current_dir, optarg); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cc -W -Wall -Wunreachable-code -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/insserv-1.25.0=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2 -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -DINITDIR=\"/etc/init.d\" -DINSCONF=\"/etc/insserv.conf\" -pipe -Wl,-z,relro -Wl,-z,now -o insserv insserv.o listing.o map.o make[1]: Leaving directory '/build/reproducible-path/insserv-1.25.0' dh_auto_test make -j12 check make[1]: Entering directory '/build/reproducible-path/insserv-1.25.0' rm -rf tests/root/ cd tests && ./common info: test simple script ordering. insserv.conf init.d: firstscript lastscript middlescript rc0.d: rc1.d: rc2.d: S01firstscript S02middlescript S03lastscript rc3.d: S01firstscript S02middlescript S03lastscript rc4.d: S01firstscript S02middlescript S03lastscript rc5.d: S01firstscript S02middlescript S03lastscript rc6.d: rcS.d: info: test if loop involving virtual facility is detected. insserv: There is a loop between service mountall and hibernate-cleanup if started insserv: loop involving service hibernate-cleanup at depth 3 insserv: loop involving service mdadm at depth 2 insserv: There is a loop between service mountall and hibernate-cleanup if started insserv: loop involving service mountall at depth 1 insserv: There is a loop between service hibernate-cleanup and mdadm if started insserv: exiting now without changing boot order! insserv.conf: $local_fs mountall insserv.conf init.d: hibernate mdadm mountall.sh rc0.d: rc1.d: rc2.d: rc3.d: S01hibernate S02mountall.sh rc4.d: rc5.d: rc6.d: rcS.d: success: 7 test executed, 0 nonfatal tests failed. # Tests are flaky. Ignore failures pending upstream fix. See #1052942 cd tests && severity=check ./run-testsuite || true info: test normal boot sequence scripts, and their order insserv: Could not read script nolsbheader: No such file or directory insserv: warning: script 'nolsbheader' missing LSB tags insserv: Could not read script nolsbheader: Success insserv: warning: script 'nolsbheader' missing LSB tags insserv: Default-Start undefined, assuming empty start runlevel(s) for script `nolsbheader' insserv: Default-Stop undefined, assuming empty stop runlevel(s) for script `nolsbheader' insserv.conf init.d: beforenfs checkfs.sh checkroot.sh halt hwclock.sh ifupdown ifupdown-clean kexec killprocs mountall.sh mountdevsubfs.sh mountkernfs.sh mountnfs.sh needallfs needallfs2 needlocalfs networking nolsbheader reboot single sysklogd umountfs umountnfs umountroot rc0.d: K01hwclock.sh K01needallfs K01needallfs2 K01needlocalfs K01sysklogd K02umountnfs K03networking K04ifupdown K05umountfs K06umountroot K07halt rc1.d: K01needallfs K01needallfs2 K01needlocalfs K01sysklogd S01killprocs S02single rc2.d: S01needallfs2 S01needlocalfs S01sysklogd S02needallfs rc3.d: S01needallfs2 S01needlocalfs S01sysklogd S02needallfs rc4.d: S01needallfs2 S01needlocalfs S01sysklogd S02needallfs rc5.d: S01needallfs2 S01needlocalfs S01sysklogd S02needallfs rc6.d: K01hwclock.sh K01needallfs K01needallfs2 K01needlocalfs K01sysklogd K02umountnfs K03networking K04ifupdown K05umountfs K06umountroot K07kexec K08reboot rcS.d: S01mountkernfs.sh S02mountdevsubfs.sh S03checkroot.sh S04checkfs.sh S05hwclock.sh S05ifupdown-clean S05mountall.sh S06beforenfs S06ifupdown S07networking S08mountnfs.sh info: test if override files replace headers in the file insserv.conf init.d: base mover insserv: override rc0.d: rc1.d: rc2.d: rc3.d: rc4.d: rc5.d: rc6.d: rcS.d: S01mover S02base info: testing to insert scripts with a loop, and the effect of an override file insserv: FATAL: service loop2 has to be enabled to use service loop1 insserv: exiting now! insserv: FATAL: service loop1 has to be enabled to use service loop2 insserv: There is a loop between service loop2 and loop1 if started insserv: loop involving service loop1 at depth 2 insserv: loop involving service loop2 at depth 1 insserv: There is a loop between service loop1 and loop2 if started insserv: exiting now without changing boot order! info: Try to reproduce BTS #540866 insserv.conf init.d: testscript insserv: override rc0.d: K01testscript rc1.d: K01testscript rc2.d: S01testscript rc3.d: rc4.d: S01testscript rc5.d: S01testscript rc6.d: K01testscript rcS.d: info: Trying to remove the script insserv.conf init.d: testscript insserv: override rc0.d: rc1.d: rc2.d: rc3.d: rc4.d: rc5.d: rc6.d: rcS.d: info: testing to insert scripts with a longer loop, making sure it fail insserv: There is a loop between service loop2 and loop1 if started insserv: loop involving service loop1 at depth 3 insserv: loop involving service loop3 at depth 2 insserv: There is a loop between service loop2 and loop1 if started insserv: loop involving service loop2 at depth 1 insserv: There is a loop between service loop1 and loop3 if started insserv: exiting now without changing boot order! info: test handling of loops in the combination of start and stop sequences insserv.conf init.d: startfirst startsecond insserv: override rc0.d: rc1.d: rc2.d: rc3.d: rc4.d: rc5.d: rc6.d: K01startsecond K02startfirst rcS.d: S01startfirst S02startsecond info: test handling of 'fake' loops in the combination of start and stop sequences insserv.conf init.d: startfirst_stopfirst startsecond_stoplast insserv: override rc0.d: rc1.d: rc2.d: rc3.d: rc4.d: rc5.d: rc6.d: K01startfirst_stopfirst K02startsecond_stoplast rcS.d: S01startfirst_stopfirst S02startsecond_stoplast info: test handling of 'fake' loops using reverse depends insserv.conf init.d: startfirst_stopfirst startsecond_stoplast insserv: override rc0.d: rc1.d: rc2.d: rc3.d: rc4.d: rc5.d: rc6.d: K01startfirst_stopfirst K02startsecond_stoplast rcS.d: S01startfirst_stopfirst S02startsecond_stoplast info: test if bad script in init.d/ with no symlinks in rc*.d/ make problems insserv.conf init.d: distroglobal sitelocal insserv: override rc0.d: rc1.d: rc2.d: rc3.d: rc4.d: rc5.d: rc6.d: K01distroglobal rcS.d: S01distroglobal info: check that it work to insert scripts with only start runlevels insserv.conf init.d: onlystart insserv: override rc0.d: rc1.d: rc2.d: S01onlystart rc3.d: S01onlystart rc4.d: S01onlystart rc5.d: S01onlystart rc6.d: rcS.d: info: check that it work to insert scripts with only stop runlevels insserv.conf init.d: onlystop insserv: override rc0.d: K01onlystop rc1.d: rc2.d: rc3.d: rc4.d: rc5.d: rc6.d: K01onlystop rcS.d: info: test if script removal removes all symlinks. insserv.conf init.d: oldscript insserv: override rc0.d: rc1.d: K01oldscript rc2.d: S01oldscript rc3.d: rc4.d: S01oldscript rc5.d: S01oldscript rc6.d: rcS.d: info: detect segfault caused by script providing virtual facility. insserv: script badheaderscript provides system facility $syslog, skipped! insserv: script badheaderscript provides system facility $syslog, skipped! insserv: script S02badheaderscript provides system facility $syslog, skipped! insserv: script badheaderscript provides system facility $syslog, skipped! insserv.conf init.d: badheaderscript okscript insserv: override rc0.d: K01okscript rc1.d: K01okscript rc2.d: S01okscript S02badheaderscript rc3.d: S01okscript rc4.d: S01okscript rc5.d: S01okscript rc6.d: K01okscript rcS.d: info: Check if insserv add start symlinks for scripts that info: currently do not have them. #492526 insserv.conf init.d: disablestartscript insserv: override rc0.d: K01disablestartscript rc1.d: K01disablestartscript rc2.d: S01disablestartscript rc3.d: S01disablestartscript rc4.d: S01disablestartscript rc5.d: S01disablestartscript rc6.d: K01disablestartscript rcS.d: insserv.conf init.d: disablestartscript insserv: override rc0.d: K01disablestartscript rc1.d: K01disablestartscript rc2.d: rc3.d: rc4.d: rc5.d: rc6.d: K01disablestartscript rcS.d: info: Check if insserv add stop symlinks for scripts that info: currently do not have them. insserv.conf init.d: disablestopscript insserv: override rc0.d: K01disablestopscript rc1.d: K01disablestopscript rc2.d: S01disablestopscript rc3.d: S01disablestopscript rc4.d: S01disablestopscript rc5.d: S01disablestopscript rc6.d: K01disablestopscript rcS.d: insserv.conf init.d: disablestopscript insserv: override rc0.d: rc1.d: rc2.d: S01disablestopscript rc3.d: S01disablestopscript rc4.d: S01disablestopscript rc5.d: S01disablestopscript rc6.d: K01disablestopscript rcS.d: info: Verify that introducing a loop in a working system do info: not change the order of the scripts currently on disk. insserv.conf init.d: mountall needboth needlocal needremote insserv: override rc0.d: rc1.d: rc2.d: rc3.d: rc4.d: rc5.d: rc6.d: K01needboth K02needremote K03needlocal rcS.d: S01mountall S02needlocal S03needremote S04needboth info: calling insserv after introducing a bug in script needboth insserv: There is a loop between service needboth and mountall if started insserv: loop involving service mountall at depth 2 insserv: loop involving service needboth at depth 1 insserv: There is a loop at service mountall if started insserv: exiting now without changing boot order! insserv.conf init.d: mountall needboth needlocal needremote insserv: override rc0.d: rc1.d: rc2.d: rc3.d: rc4.d: rc5.d: rc6.d: K01needboth K02needremote K03needlocal rcS.d: S01mountall S02needlocal S03needremote S04needboth info: Verify that X-start-before work as it should. insserv.conf init.d: startfirst startlast insserv: override rc0.d: rc1.d: rc2.d: rc3.d: rc4.d: rc5.d: rc6.d: rcS.d: S01startfirst S02startlast info: Verify that X-stop-after work as it should. insserv.conf init.d: stopafter stopfirst insserv: override rc0.d: K01stopfirst K02stopafter rc1.d: rc2.d: rc3.d: rc4.d: rc5.d: rc6.d: K01stopfirst K02stopafter rcS.d: info: Make sure that adding start levels do not change an existing installation. insserv: warning: current start runlevel(s) (empty) of script `addstartscript' overrides LSB defaults (2 3 4 5). insserv.conf init.d: addstartscript insserv: override rc0.d: rc1.d: K01addstartscript rc2.d: rc3.d: rc4.d: rc5.d: rc6.d: rcS.d: info: Make sure that removing start levels do not change an existing installation. insserv: warning: current start runlevel(s) (2 3 4 5) of script `remstartscript' overrides LSB defaults (empty). insserv.conf init.d: remstartscript insserv: override rc0.d: K01remstartscript rc1.d: K01remstartscript rc2.d: S01remstartscript rc3.d: S01remstartscript rc4.d: S01remstartscript rc5.d: S01remstartscript rc6.d: K01remstartscript rcS.d: info: Make sure that adding stop levels do not change an existing installation. insserv: warning: current stop runlevel(s) (empty) of script `addstopscript' overrides LSB defaults (0). insserv.conf init.d: addstopscript insserv: override rc0.d: rc1.d: rc2.d: rc3.d: rc4.d: rc5.d: rc6.d: rcS.d: S01addstopscript info: Make sure that removing stop levels do not change an existing installation. insserv: warning: current stop runlevel(s) (0 6) of script `remstopscript' overrides LSB defaults (empty). insserv.conf init.d: remstopscript insserv: override rc0.d: K01remstopscript rc1.d: rc2.d: rc3.d: rc4.d: rc5.d: rc6.d: K01remstopscript rcS.d: S01remstopscript info: test two initscripts providing same facility. info: Not sure if this should fail or not. insserv: script two: service samefac already provided! insserv: script two: service samefac already provided! insserv: exiting now! insserv.conf init.d: one two insserv: override rc0.d: rc1.d: rc2.d: rc3.d: rc4.d: rc5.d: rc6.d: rcS.d: S01one info: test insertion of script requiring a virtual facility that doesn't exist insserv: warning: could not find all dependencies for $bogusvirtualfacility insserv.conf init.d: needbogusvirtual insserv: override rc0.d: rc1.d: rc2.d: rc3.d: rc4.d: rc5.d: rc6.d: rcS.d: S01needbogusvirtual info: test that /etc/insserv.conf.d/ is used insserv.conf init.d: dummy facone factwo service insserv: override insserv.conf.d: facone factwo rc0.d: rc1.d: rc2.d: rc3.d: rc4.d: rc5.d: rc6.d: rcS.d: S01dummy S02facone S02factwo S03service info: test insertion of script missing Required-{Start,Stop} fields insserv: script badheader is broken: incomplete LSB comment. insserv: missing `Required-Start:' entry: please add even if empty. insserv: missing `Required-Stop:' entry: please add even if empty. insserv: script badheader is broken: incomplete LSB comment. insserv: missing `Required-Start:' entry: please add even if empty. insserv: missing `Required-Stop:' entry: please add even if empty. insserv.conf init.d: badheader insserv: override rc0.d: K01badheader rc1.d: K01badheader rc2.d: S01badheader rc3.d: S01badheader rc4.d: S01badheader rc5.d: S01badheader rc6.d: K01badheader rcS.d: info: test insertion of script missing Provides fields insserv: script badheader is broken: incomplete LSB comment. insserv: missing `Provides:' entry: please add. insserv: script badheader is broken: incomplete LSB comment. insserv: missing `Provides:' entry: please add. insserv.conf init.d: badheader insserv: override rc0.d: K01badheader rc1.d: K01badheader rc2.d: S01badheader rc3.d: S01badheader rc4.d: S01badheader rc5.d: S01badheader rc6.d: K01badheader rcS.d: info: test insertion of script missing Default-Start field insserv: script nodefstart is broken: incomplete LSB comment. insserv: missing `Default-Start:' entry: please add even if empty. insserv: script nodefstart is broken: incomplete LSB comment. insserv: missing `Default-Start:' entry: please add even if empty. insserv: Default-Start undefined, assuming empty start runlevel(s) for script `nodefstart' insserv.conf init.d: nodefstart insserv: override rc0.d: K01nodefstart rc1.d: rc2.d: rc3.d: rc4.d: rc5.d: rc6.d: K01nodefstart rcS.d: info: test insertion of script missing Default-Stop field insserv: script nodefstop is broken: incomplete LSB comment. insserv: missing `Default-Stop:' entry: please add even if empty. insserv: script nodefstop is broken: incomplete LSB comment. insserv: missing `Default-Stop:' entry: please add even if empty. insserv: Default-Stop undefined, assuming empty stop runlevel(s) for script `nodefstop' insserv.conf init.d: nodefstop insserv: override rc0.d: rc1.d: rc2.d: S01nodefstop rc3.d: S01nodefstop rc4.d: S01nodefstop rc5.d: S01nodefstop rc6.d: rcS.d: info: test that a symlink in /etc/init.d/ to another script does not cause problems insserv: script symlink is a symlink to another script, skipped! insserv.conf outsider init.d: outsidelink symlink symlinked insserv: override rc0.d: rc1.d: K01outsidelink K01symlinked rc2.d: S01outsidelink S01symlinked rc3.d: S01outsidelink S01symlinked rc4.d: S01outsidelink S01symlinked rc5.d: S01outsidelink S01symlinked rc6.d: rcS.d: info: test two or more initscripts providing same facility, making sure info: that the first script can be registered with insserv, but others fail. insserv: script hjk: service service already provided! insserv: script abc: service service already provided! insserv: script hjk: service service already provided! insserv: script abc: service service already provided! insserv: exiting now! insserv: script abc: service service already provided! insserv: script hjk: service service already provided! insserv: exiting now! insserv.conf init.d: abc hjk xyz insserv: override rc0.d: rc1.d: rc2.d: rc3.d: rc4.d: rc5.d: rc6.d: rcS.d: S01xyz info: test behaviour of a script depending on another with the $all keyword info: #491391 insserv: Starting bootchart depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: There is a loop between service rmnologin and bootchart if started insserv: loop involving service bootchart at depth 2 insserv: loop involving service rmnologin at depth 1 insserv: There is a loop at service bootchart if started insserv: Starting bootchart depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: loop involving service four at depth 1 insserv: Starting bootchart depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting bootchart depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting bootchart depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting bootchart depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: exiting now without changing boot order! insserv.conf init.d: bootchart four one rmnologin three two insserv: override rc0.d: rc1.d: rc2.d: S01one S01three S01two S02four S03rmnologin rc3.d: S01one S01three S01two S02four S03rmnologin rc4.d: S01one S01three S01two S02four S03rmnologin rc5.d: S01one S01three S01two S02four S03rmnologin rc6.d: rcS.d: error: script bootchart not present in runlevel 5 error: 198 test executed, 1 fatal tests failed, 0 nonfatal test failed. make[1]: Leaving directory '/build/reproducible-path/insserv-1.25.0' create-stamp debian/debhelper-build-stamp fakeroot debian/rules binary echo -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/insserv-1.25.0=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/insserv-1.25.0=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard dh binary --with=bash-completion dh_testroot dh_prep dh_installdirs dh_auto_install --destdir=debian/insserv/ make -j12 install DESTDIR=/build/reproducible-path/insserv-1.25.0/debian/insserv AM_UPDATE_INFO_DIR=no "INSTALL=install --strip-program=true" make[1]: Entering directory '/build/reproducible-path/insserv-1.25.0' mkdir -p /build/reproducible-path/insserv-1.25.0/debian/insserv/usr/sbin mkdir -p /build/reproducible-path/insserv-1.25.0/debian/insserv/usr/share/man/man8 mkdir -p /build/reproducible-path/insserv-1.25.0/debian/insserv/etc install -m 0755 insserv /build/reproducible-path/insserv-1.25.0/debian/insserv/usr/sbin/ install -c -m 0644 insserv.8 /build/reproducible-path/insserv-1.25.0/debian/insserv/usr/share/man/man8/ # Only install configuration file if it does not exist. Do not overwrite distro config. if [ -f /build/reproducible-path/insserv-1.25.0/debian/insserv/etc/insserv.conf ]; then install -c -m 0644 insserv.conf /build/reproducible-path/insserv-1.25.0/debian/insserv/etc/insserv.conf.sample ; fi if [ ! -f /build/reproducible-path/insserv-1.25.0/debian/insserv/etc/insserv.conf ] ; then install -c -m 0644 insserv.conf /build/reproducible-path/insserv-1.25.0/debian/insserv/etc/ ; fi make[1]: Leaving directory '/build/reproducible-path/insserv-1.25.0' dh_install dh_installdocs dh_installchangelogs dh_installman dh_bash-completion dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 from: /lib/ld-linux-aarch64.so.1 dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 to: /lib/ld-linux-aarch64.so.1.usr-is-merged dh_installdeb dh_gencontrol dpkg-gencontrol: warning: package insserv: substitution variable ${perl:Depends} unused, but is defined dpkg-gencontrol: warning: package insserv: substitution variable ${perl:Depends} unused, but is defined dh_md5sums dh_builddeb dpkg-deb: building package 'insserv-dbgsym' in '../insserv-dbgsym_1.25.0-1_arm64.deb'. dpkg-deb: building package 'insserv' in '../insserv_1.25.0-1_arm64.deb'. dpkg-genbuildinfo --build=binary -O../insserv_1.25.0-1_arm64.buildinfo dpkg-genchanges --build=binary -O../insserv_1.25.0-1_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: including full source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/3027181 and its subdirectories I: Current time: Sun Nov 17 18:48:18 -12 2024 I: pbuilder-time-stamp: 1731912498 Mon Nov 18 06:48:20 UTC 2024 I: 1st build successful. Starting 2nd build on remote node codethink03-arm64.debian.net. Mon Nov 18 06:48:20 UTC 2024 I: Preparing to do remote build '2' on codethink03-arm64.debian.net. Mon Nov 18 06:48:57 UTC 2024 I: Deleting $TMPDIR on codethink03-arm64.debian.net. Mon Nov 18 06:48:59 UTC 2024 I: insserv_1.25.0-1_arm64.changes: Format: 1.8 Date: Wed, 21 Aug 2024 18:09:48 +0100 Source: insserv Binary: insserv insserv-dbgsym Architecture: arm64 Version: 1.25.0-1 Distribution: unstable Urgency: medium Maintainer: Debian sysvinit maintainers Changed-By: Mark Hindley Description: insserv - boot sequence organizer using LSB init.d script dependency inform Changes: insserv (1.25.0-1) unstable; urgency=medium . * New upstream version 1.25.0 * d/patches: drop patch fixed upstream. Checksums-Sha1: 855610bbd61c97e237bc4b2a56ff61ab4c7648b2 83800 insserv-dbgsym_1.25.0-1_arm64.deb 7ef8deb50d5a6f45f3f5851d38c70d2cb115dda2 4975 insserv_1.25.0-1_arm64.buildinfo f093041d9de49c362334f9c5f1e7a34d4e120b23 49568 insserv_1.25.0-1_arm64.deb Checksums-Sha256: 2e3a2f7aff4ec1c1e06c6593aec2b2060b2a6e74ccd01fbdf5a5ed5bf4a14e6c 83800 insserv-dbgsym_1.25.0-1_arm64.deb c3bd6799e1d88ab4f99c05292f728a2400820ad758bcc38e41c3fb8861359acd 4975 insserv_1.25.0-1_arm64.buildinfo 771baa8bed752cb62f2b53ba0e7ce4c0ca8aa31cf2b0295e9d8e02acd48b3b96 49568 insserv_1.25.0-1_arm64.deb Files: a768ff0744793a902bbb0c23e8ec5e99 83800 debug optional insserv-dbgsym_1.25.0-1_arm64.deb 5195f3685a2beb0dc374567fc79b61ee 4975 misc optional insserv_1.25.0-1_arm64.buildinfo 7240e45b290e4b7c72805c6837289096 49568 misc optional insserv_1.25.0-1_arm64.deb Mon Nov 18 06:49:00 UTC 2024 I: diffoscope 283 will be used to compare the two builds: Running as unit: rb-diffoscope-arm64_19-44661.service # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.SGEpfK3k/insserv_1.25.0-1.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.SGEpfK3k/insserv_1.25.0-1.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.SGEpfK3k/insserv_1.25.0-1.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.SGEpfK3k/b1/insserv_1.25.0-1_arm64.changes /srv/reproducible-results/rbuild-debian/r-b-build.SGEpfK3k/b2/insserv_1.25.0-1_arm64.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.369s) 0.369s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.014s) 0.014s 12 calls diffoscope.comparators.binary.FilesystemFile ## specialize (total time: 0.000s) 0.000s 1 call specialize Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 736ms CPU time consumed: 736ms Mon Nov 18 06:49:01 UTC 2024 I: diffoscope 283 found no differences in the changes files, and a .buildinfo file also exists. Mon Nov 18 06:49:01 UTC 2024 I: insserv from trixie built successfully and reproducibly on arm64. Mon Nov 18 06:49:02 UTC 2024 I: Submitting .buildinfo files to external archives: Mon Nov 18 06:49:02 UTC 2024 I: Submitting 8.0K b1/insserv_1.25.0-1_arm64.buildinfo.asc Mon Nov 18 06:49:03 UTC 2024 I: Submitting 8.0K b2/insserv_1.25.0-1_arm64.buildinfo.asc Mon Nov 18 06:49:04 UTC 2024 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Mon Nov 18 06:49:04 UTC 2024 I: Done submitting .buildinfo files. Mon Nov 18 06:49:04 UTC 2024 I: Removing signed insserv_1.25.0-1_arm64.buildinfo.asc files: removed './b1/insserv_1.25.0-1_arm64.buildinfo.asc' removed './b2/insserv_1.25.0-1_arm64.buildinfo.asc'