Sat May 4 07:07:33 UTC 2024 I: starting to build safe-hole-perl/trixie/amd64 on jenkins on '2024-05-04 07:07' Sat May 4 07:07:33 UTC 2024 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/amd64_28/19116/console.log Sat May 4 07:07:33 UTC 2024 I: Downloading source for trixie/safe-hole-perl=0.14-1 --2024-05-04 07:07:33-- http://deb.debian.org/debian/pool/main/s/safe-hole-perl/safe-hole-perl_0.14-1.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 1774 (1.7K) [text/prs.lines.tag] Saving to: ‘safe-hole-perl_0.14-1.dsc’ 0K . 100% 247M=0s 2024-05-04 07:07:33 (247 MB/s) - ‘safe-hole-perl_0.14-1.dsc’ saved [1774/1774] Sat May 4 07:07:33 UTC 2024 I: safe-hole-perl_0.14-1.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Format: 3.0 (quilt) Source: safe-hole-perl Binary: libsafe-hole-perl Architecture: any Version: 0.14-1 Maintainer: Stefan Hornburg (Racke) Standards-Version: 4.5.0 Build-Depends: debhelper (>= 13), perl, libmodule-build-perl Package-List: libsafe-hole-perl deb perl optional arch=any Checksums-Sha1: 995573506ef6d52cfac8bf41e4bdc04508443dbe 13768 safe-hole-perl_0.14.orig.tar.gz 90e4aa7864e622e84ff68c6d026a3bea21453264 1768 safe-hole-perl_0.14-1.debian.tar.xz Checksums-Sha256: 708b4b907e7c0cea819e144517786637cd7bcbd98dff077f51dd4242c8d3c1ae 13768 safe-hole-perl_0.14.orig.tar.gz a0b22253f0e2d9b46e83b240d873c8ad9003986dc5bfbc38d71990bcf00102b1 1768 safe-hole-perl_0.14-1.debian.tar.xz Files: f3c5c050b471b58867074ff77ae4c86d 13768 safe-hole-perl_0.14.orig.tar.gz 606af04fe07077be7ae825518077fbba 1768 safe-hole-perl_0.14-1.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQJFBAEBCAAvFiEE1oFJdaJ3d0yY0N/vW5MBW/onIPgFAl8X0EoRHHJhY2tlQGxp bnV4aWEuZGUACgkQW5MBW/onIPjCxhAAj7iZS472bVgSCoz7A9EJ6w4a9rBKr2t1 a5HvjFexOrluvn4iTcWmv+13F3ksgrpNwAFR9xh3f1mc517fkZCgbfF5rQDPD6cu 3FN/4PGN0pUgUnc0kwH4oL6VCmveoreBoCfATLTKFDD9QefF98JjPDU49C3cXx3Y 3OrWNEbeZT8VxR0NMJLsK/9b+J+nP0HZOi3pgKAxVagKI+amCi9IPKvCAP0HhLT3 AvL2WcznmvhG7ZBIuJdhbTn5wat6CHfcvQ3uT9lIY9CJTG4F7AFdAhaRuqg4Lf13 5pNNR748yfzFnIqLTI6yO2Zzzb+RnONgL8Xceg8qhnPcgx1oG/1/o9TPzEKDCkUd /lSgivWGdPxg/eTQk67VfQ+Ow91hnVgqctyA7IV8/8yaZWALa0APjRCLcZHAOs+z qUW4mnZMmE2LJCzV7I7un8PC7QcpQBwruS4DpqNKT3Z5VBLCwlv7To5ugQL+YR8I jXH0UIf2r3crmEWM/bmcqXGFCc0TIDYNd42FYHacRKjyHMF8w5Up87WQXWCd1ult yhS3FnkDbfkbTc+5BuL5zzH5GC++7F1MZY0NoeMC+eTAozkhZjcO/zPOC7wzFnrc 1VjIgjflVGPGV3trCRTfRQgT9WkOnyZ8suOZKDN1JIwHgFh70YfPEpPMf//fw9eQ XQ/Zg/mcZoA= =cCOY -----END PGP SIGNATURE----- Sat May 4 07:07:33 UTC 2024 I: Checking whether the package is not for us Sat May 4 07:07:33 UTC 2024 I: Starting 1st build on remote node ionos15-amd64.debian.net. Sat May 4 07:07:33 UTC 2024 I: Preparing to do remote build '1' on ionos15-amd64.debian.net. Sat May 4 07:08:08 UTC 2024 I: Deleting $TMPDIR on ionos15-amd64.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Fri Jun 6 01:30:36 -12 2025 I: pbuilder-time-stamp: 1749216636 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [safe-hole-perl_0.14-1.dsc] I: copying [./safe-hole-perl_0.14.orig.tar.gz] I: copying [./safe-hole-perl_0.14-1.debian.tar.xz] I: Extracting source gpgv: Signature made Wed Jul 22 05:36:10 2020 gpgv: using RSA key D6814975A277774C98D0DFEF5B93015BFA2720F8 gpgv: issuer "racke@linuxia.de" gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./safe-hole-perl_0.14-1.dsc: no acceptable signature found dpkg-source: info: extracting safe-hole-perl in safe-hole-perl-0.14 dpkg-source: info: unpacking safe-hole-perl_0.14.orig.tar.gz dpkg-source: info: unpacking safe-hole-perl_0.14-1.debian.tar.xz I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/3838410/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='amd64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=42 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='amd64' IFS=' ' INVOCATION_ID='5b5459053d0f4ef6948046a3302e8b04' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='3838410' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.MJH2T65L/pbuilderrc_ImTJ --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.MJH2T65L/b1 --logfile b1/build.log safe-hole-perl_0.14-1.dsc' SUDO_GID='111' SUDO_UID='106' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://213.165.73.152:3128' I: uname -a Linux ionos15-amd64 6.6.13+bpo-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.6.13-1~bpo12+1 (2024-02-15) x86_64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Jun 5 14:46 /bin -> usr/bin I: user script /srv/workspace/pbuilder/3838410/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: amd64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper (>= 13), perl, libmodule-build-perl dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19695 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper (>= 13); however: Package debhelper is not installed. pbuilder-satisfydepends-dummy depends on libmodule-build-perl; however: Package libmodule-build-perl is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libicu72{a} libmagic-mgc{a} libmagic1t64{a} libmodule-build-perl{a} libpipeline1{a} libsub-override-perl{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl libmodule-signature-perl libpod-readme-perl libsoftware-license-perl lynx wget 0 packages upgraded, 31 newly installed, 0 to remove and 0 not upgraded. Need to get 19.3 MB of archives. After unpacking 74.2 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main amd64 sensible-utils all 0.0.22 [22.4 kB] Get: 2 http://deb.debian.org/debian trixie/main amd64 libmagic-mgc amd64 1:5.45-3 [314 kB] Get: 3 http://deb.debian.org/debian trixie/main amd64 libmagic1t64 amd64 1:5.45-3 [105 kB] Get: 4 http://deb.debian.org/debian trixie/main amd64 file amd64 1:5.45-3 [42.9 kB] Get: 5 http://deb.debian.org/debian trixie/main amd64 gettext-base amd64 0.21-14+b1 [161 kB] Get: 6 http://deb.debian.org/debian trixie/main amd64 libuchardet0 amd64 0.0.8-1+b1 [68.8 kB] Get: 7 http://deb.debian.org/debian trixie/main amd64 groff-base amd64 1.23.0-3+b1 [1180 kB] Get: 8 http://deb.debian.org/debian trixie/main amd64 bsdextrautils amd64 2.40-8 [92.8 kB] Get: 9 http://deb.debian.org/debian trixie/main amd64 libpipeline1 amd64 1.5.7-2 [38.0 kB] Get: 10 http://deb.debian.org/debian trixie/main amd64 man-db amd64 2.12.1-1 [1411 kB] Get: 11 http://deb.debian.org/debian trixie/main amd64 m4 amd64 1.4.19-4 [287 kB] Get: 12 http://deb.debian.org/debian trixie/main amd64 autoconf all 2.71-3 [332 kB] Get: 13 http://deb.debian.org/debian trixie/main amd64 autotools-dev all 20220109.1 [51.6 kB] Get: 14 http://deb.debian.org/debian trixie/main amd64 automake all 1:1.16.5-1.3 [823 kB] Get: 15 http://deb.debian.org/debian trixie/main amd64 autopoint all 0.21-14 [496 kB] Get: 16 http://deb.debian.org/debian trixie/main amd64 libdebhelper-perl all 13.15.3 [88.0 kB] Get: 17 http://deb.debian.org/debian trixie/main amd64 libtool all 2.4.7-7 [517 kB] Get: 18 http://deb.debian.org/debian trixie/main amd64 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian trixie/main amd64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian trixie/main amd64 libsub-override-perl all 0.10-1 [10.6 kB] Get: 21 http://deb.debian.org/debian trixie/main amd64 libfile-stripnondeterminism-perl all 1.13.1-1 [19.4 kB] Get: 22 http://deb.debian.org/debian trixie/main amd64 dh-strip-nondeterminism all 1.13.1-1 [8620 B] Get: 23 http://deb.debian.org/debian trixie/main amd64 libelf1t64 amd64 0.191-1+b1 [189 kB] Get: 24 http://deb.debian.org/debian trixie/main amd64 dwz amd64 0.15-1+b1 [110 kB] Get: 25 http://deb.debian.org/debian trixie/main amd64 libicu72 amd64 72.1-4+b1 [9395 kB] Get: 26 http://deb.debian.org/debian trixie/main amd64 libxml2 amd64 2.9.14+dfsg-1.3+b3 [692 kB] Get: 27 http://deb.debian.org/debian trixie/main amd64 gettext amd64 0.21-14+b1 [1301 kB] Get: 28 http://deb.debian.org/debian trixie/main amd64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 29 http://deb.debian.org/debian trixie/main amd64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 30 http://deb.debian.org/debian trixie/main amd64 debhelper all 13.15.3 [901 kB] Get: 31 http://deb.debian.org/debian trixie/main amd64 libmodule-build-perl all 0.423400-2 [252 kB] Fetched 19.3 MB in 0s (135 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19695 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.22_all.deb ... Unpacking sensible-utils (0.0.22) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3_amd64.deb ... Unpacking libmagic-mgc (1:5.45-3) ... Selecting previously unselected package libmagic1t64:amd64. Preparing to unpack .../02-libmagic1t64_1%3a5.45-3_amd64.deb ... Unpacking libmagic1t64:amd64 (1:5.45-3) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-3_amd64.deb ... Unpacking file (1:5.45-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.21-14+b1_amd64.deb ... Unpacking gettext-base (0.21-14+b1) ... Selecting previously unselected package libuchardet0:amd64. Preparing to unpack .../05-libuchardet0_0.0.8-1+b1_amd64.deb ... Unpacking libuchardet0:amd64 (0.0.8-1+b1) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-3+b1_amd64.deb ... Unpacking groff-base (1.23.0-3+b1) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.40-8_amd64.deb ... Unpacking bsdextrautils (2.40-8) ... Selecting previously unselected package libpipeline1:amd64. Preparing to unpack .../08-libpipeline1_1.5.7-2_amd64.deb ... Unpacking libpipeline1:amd64 (1.5.7-2) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.12.1-1_amd64.deb ... Unpacking man-db (2.12.1-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-4_amd64.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.71-3_all.deb ... Unpacking autoconf (2.71-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.21-14_all.deb ... Unpacking autopoint (0.21-14) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.15.3_all.deb ... Unpacking libdebhelper-perl (13.15.3) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.4.7-7_all.deb ... Unpacking libtool (2.4.7-7) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libsub-override-perl. Preparing to unpack .../19-libsub-override-perl_0.10-1_all.deb ... Unpacking libsub-override-perl (0.10-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../20-libfile-stripnondeterminism-perl_1.13.1-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.13.1-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../21-dh-strip-nondeterminism_1.13.1-1_all.deb ... Unpacking dh-strip-nondeterminism (1.13.1-1) ... Selecting previously unselected package libelf1t64:amd64. Preparing to unpack .../22-libelf1t64_0.191-1+b1_amd64.deb ... Unpacking libelf1t64:amd64 (0.191-1+b1) ... Selecting previously unselected package dwz. Preparing to unpack .../23-dwz_0.15-1+b1_amd64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libicu72:amd64. Preparing to unpack .../24-libicu72_72.1-4+b1_amd64.deb ... Unpacking libicu72:amd64 (72.1-4+b1) ... Selecting previously unselected package libxml2:amd64. Preparing to unpack .../25-libxml2_2.9.14+dfsg-1.3+b3_amd64.deb ... Unpacking libxml2:amd64 (2.9.14+dfsg-1.3+b3) ... Selecting previously unselected package gettext. Preparing to unpack .../26-gettext_0.21-14+b1_amd64.deb ... Unpacking gettext (0.21-14+b1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../27-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../28-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../29-debhelper_13.15.3_all.deb ... Unpacking debhelper (13.15.3) ... Selecting previously unselected package libmodule-build-perl. Preparing to unpack .../30-libmodule-build-perl_0.423400-2_all.deb ... Adding 'diversion of /usr/bin/config_data to /usr/bin/config_data.diverted by libmodule-build-perl' Adding 'diversion of /usr/share/man/man1/config_data.1.gz to /usr/share/man/man1/config_data.diverted.1.gz by libmodule-build-perl' Unpacking libmodule-build-perl (0.423400-2) ... Setting up libpipeline1:amd64 (1.5.7-2) ... Setting up libicu72:amd64 (72.1-4+b1) ... Setting up bsdextrautils (2.40-8) ... Setting up libmagic-mgc (1:5.45-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.15.3) ... Setting up libmagic1t64:amd64 (1:5.45-3) ... Setting up gettext-base (0.21-14+b1) ... Setting up m4 (1.4.19-4) ... Setting up file (1:5.45-3) ... Setting up libelf1t64:amd64 (0.191-1+b1) ... Setting up libmodule-build-perl (0.423400-2) ... Setting up autotools-dev (20220109.1) ... Setting up autopoint (0.21-14) ... Setting up autoconf (2.71-3) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.22) ... Setting up libuchardet0:amd64 (0.0.8-1+b1) ... Setting up libsub-override-perl (0.10-1) ... Setting up libxml2:amd64 (2.9.14+dfsg-1.3+b3) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.13.1-1) ... Setting up gettext (0.21-14+b1) ... Setting up libtool (2.4.7-7) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.13.1-1) ... Setting up groff-base (1.23.0-3+b1) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.12.1-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.15.3) ... Processing triggers for libc-bin (2.37-19) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.33-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/reproducible-path/safe-hole-perl-0.14/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../safe-hole-perl_0.14-1_source.changes dpkg-buildpackage: info: source package safe-hole-perl dpkg-buildpackage: info: source version 0.14-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Stefan Hornburg (Racke) dpkg-source --before-build . dpkg-buildpackage: info: host architecture amd64 fakeroot debian/rules clean dh clean dh: warning: Use of debian/compat is deprecated and will be removed in debhelper (>= 14~). dh_clean dh_clean: warning: Use of debian/compat is deprecated and will be removed in debhelper (>= 14~). debian/rules build dh build dh: warning: Use of debian/compat is deprecated and will be removed in debhelper (>= 14~). dh_update_autotools_config dh_autoreconf dh_auto_configure dh_auto_configure: warning: Use of debian/compat is deprecated and will be removed in debhelper (>= 14~). /usr/bin/perl Build.PL --installdirs vendor --config "optimize=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/safe-hole-perl-0.14=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2" --config "ld=x86_64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/safe-hole-perl-0.14=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wl,-z,relro" Created MYMETA.yml and MYMETA.json Creating new 'Build' script for 'Safe-Hole' version '0.14' dh_auto_build dh_auto_build: warning: Use of debian/compat is deprecated and will be removed in debhelper (>= 14~). /usr/bin/perl Build Building Safe-Hole x86_64-linux-gnu-gcc -I/usr/lib/x86_64-linux-gnu/perl/5.38/CORE '-DVERSION="0.14"' '-DXS_VERSION="0.14"' -fPIC -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE '-D_FILE_OFFSET_BITS=64' -g -O2 '-Werror=implicit-function-declaration' '-ffile-prefix-map=/build/reproducible-path/safe-hole-perl-0.14=.' -fstack-protector-strong -fstack-clash-protection -Wformat '-Werror=format-security' -fcf-protection -g -O2 '-Werror=implicit-function-declaration' '-ffile-prefix-map=/build/reproducible-path/safe-hole-perl-0.14=.' -fstack-protector-strong -fstack-clash-protection -Wformat '-Werror=format-security' -fcf-protection -Wdate-time '-D_FORTIFY_SOURCE=2' -o lib/Safe/Hole.o lib/Safe/Hole.c lib/Safe/Hole.xs: In function 'XS_Safe__Hole__hole_call_sv': lib/Safe/Hole.xs:83:5: warning: 'Perl_dowantarray' is deprecated [-Wdeprecated-declarations] 83 | perl_call_sv(codesv, GIMME); | ^~~~~~~~~~~~ In file included from /usr/lib/x86_64-linux-gnu/perl/5.38/CORE/perl.h:6188, from lib/Safe/Hole.xs:10: /usr/lib/x86_64-linux-gnu/perl/5.38/CORE/proto.h:1019:1: note: declared here 1019 | Perl_dowantarray(pTHX) | ^~~~~~~~~~~~~~~~ ExtUtils::Mkbootstrap::Mkbootstrap('blib/arch/auto/Safe/Hole/Hole.bs') x86_64-linux-gnu-gcc -g -O2 '-Werror=implicit-function-declaration' '-ffile-prefix-map=/build/reproducible-path/safe-hole-perl-0.14=.' -fstack-protector-strong -fstack-clash-protection -Wformat '-Werror=format-security' -fcf-protection -Wl,-z,relro -shared -L/usr/local/lib -fstack-protector-strong -o blib/arch/auto/Safe/Hole/Hole.so lib/Safe/Hole.o dh_auto_test dh_auto_test: warning: Use of debian/compat is deprecated and will be removed in debhelper (>= 14~). /usr/bin/perl Build test --verbose 1 # Testing Safe::Hole 0.14, Perl 5.038002, /usr/bin/perl t/00-load.t .......... 1..1 ok 1 - use Safe::Hole; ok t/01-hole.t .......... 1..33 ok 1 - use Safe::Hole; ok 2 - An object of class 'Safe' isa 'Safe' ok 3 - An object of class 'Safe::Hole' isa 'Safe::Hole' ok 4 - Test visibility of root namespace ok 5 - Reval $v ok 6 - $hole->call returns \$v ok 7 - $save->reval('v()') returns $v ok 8 - No error on reval call ok 9 - $safe->reval('v_wrapped()') returns $v ok 10 - No error on reval(vrwapped) call ok 11 - $safe->reval('do_op()') returns false ok 12 - $safe->reval('do_op()') retuns true after doing an invalid eval ok 13 - Check Safe::Hole clears the opmask ok 14 - Reality: check eof allowed ok 15 - Disabled opcode propagates into Safe compartment ok 16 - Disabled opcode is not disabled via $hole ok 17 - '$hole2' isa 'Safe::Hole' ok 18 - $hole2->call(sub{ 666 }) returns 666 ok 19 - $hole2->call(do_op) returns false ok 20 - $hole2->call(\&do_op) returns true ok 21 - We can still get at forbidden op via $hole ok 22 - ...but not via $hole2 ok 23 - Check argument and return passing (5) ok 24 - Check argument and return passing (34) ok 25 - Check exception handling of die - eval doesn't cause die ok 26 - $@ is populated ok 27 - 'New hole' isa 'Safe::Hole' ok 28 - backwards compatible - old_hole ok 29 - 'New hole alternate root' isa 'Safe::Hole' ok 30 - v in foo - alternate root ok 31 - $safe->reval('do_op_wrapped_old()') ok 32 - Test that require works ok 33 - %INC = ( FOO => "./FOO.pm" ); ok t/98-pod-coverage.t .. skipped: Test::Pod::Coverage 1.08 required for testing POD coverage t/99-pod.t ........... skipped: Test::Pod 1.22 required for testing POD All tests successful. Files=4, Tests=34, 0 wallclock secs ( 0.02 usr 0.01 sys + 0.24 cusr 0.02 csys = 0.29 CPU) Result: PASS create-stamp debian/debhelper-build-stamp fakeroot debian/rules binary dh binary dh: warning: Use of debian/compat is deprecated and will be removed in debhelper (>= 14~). dh_testroot dh_prep dh_auto_install --destdir=debian/libsafe-hole-perl/ dh_auto_install: warning: Use of debian/compat is deprecated and will be removed in debhelper (>= 14~). /usr/bin/perl Build install --destdir /build/reproducible-path/safe-hole-perl-0.14/debian/libsafe-hole-perl --create_packlist 0 Building Safe-Hole Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /build/reproducible-path/safe-hole-perl-0.14/debian/libsafe-hole-perl/usr/lib/x86_64-linux-gnu/perl5/5.38/auto/Safe/Hole/Hole.so Installing /build/reproducible-path/safe-hole-perl-0.14/debian/libsafe-hole-perl/usr/lib/x86_64-linux-gnu/perl5/5.38/auto/Safe/Hole/Hole.bs Installing /build/reproducible-path/safe-hole-perl-0.14/debian/libsafe-hole-perl/usr/lib/x86_64-linux-gnu/perl5/5.38/Safe/Hole.pm Installing /build/reproducible-path/safe-hole-perl-0.14/debian/libsafe-hole-perl/usr/share/man/man3/Safe::Hole.3pm dh_installdocs dh_installdocs: warning: Use of debian/compat is deprecated and will be removed in debhelper (>= 14~). dh_installchangelogs dh_installchangelogs: warning: Use of debian/compat is deprecated and will be removed in debhelper (>= 14~). dh_installman dh_installman: warning: Use of debian/compat is deprecated and will be removed in debhelper (>= 14~). dh_perl dh_link dh_strip_nondeterminism dh_compress dh_compress: warning: Use of debian/compat is deprecated and will be removed in debhelper (>= 14~). dh_fixperms dh_missing dh_missing: warning: Use of debian/compat is deprecated and will be removed in debhelper (>= 14~). dh_dwz -a dh_strip -a dh_strip: warning: Use of debian/compat is deprecated and will be removed in debhelper (>= 14~). dh_makeshlibs -a dh_makeshlibs: warning: Use of debian/compat is deprecated and will be removed in debhelper (>= 14~). dh_shlibdeps -a dh_shlibdeps: warning: Use of debian/compat is deprecated and will be removed in debhelper (>= 14~). dh_installdeb dh_installdeb: warning: Use of debian/compat is deprecated and will be removed in debhelper (>= 14~). dh_gencontrol dh_gencontrol: warning: Use of debian/compat is deprecated and will be removed in debhelper (>= 14~). dh_md5sums dh_builddeb dpkg-deb: building package 'libsafe-hole-perl' in '../libsafe-hole-perl_0.14-1_amd64.deb'. dpkg-deb: building package 'libsafe-hole-perl-dbgsym' in '../libsafe-hole-perl-dbgsym_0.14-1_amd64.deb'. dpkg-genbuildinfo --build=binary -O../safe-hole-perl_0.14-1_amd64.buildinfo dpkg-genchanges --build=binary -O../safe-hole-perl_0.14-1_amd64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: including full source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/3838410 and its subdirectories I: Current time: Fri Jun 6 01:31:07 -12 2025 I: pbuilder-time-stamp: 1749216667 Sat May 4 07:08:09 UTC 2024 I: 1st build successful. Starting 2nd build on remote node ionos11-amd64.debian.net. Sat May 4 07:08:09 UTC 2024 I: Preparing to do remote build '2' on ionos11-amd64.debian.net. Sat May 4 07:09:06 UTC 2024 I: Deleting $TMPDIR on ionos11-amd64.debian.net. Sat May 4 07:09:07 UTC 2024 I: safe-hole-perl_0.14-1_amd64.changes: Format: 1.8 Date: Wed, 22 Jul 2020 07:12:45 +0200 Source: safe-hole-perl Binary: libsafe-hole-perl libsafe-hole-perl-dbgsym Architecture: amd64 Version: 0.14-1 Distribution: unstable Urgency: low Maintainer: Stefan Hornburg (Racke) Changed-By: Stefan Hornburg (Racke) Description: libsafe-hole-perl - Perl module which makes a "hole" in the Safe compartment Closes: 965811 Changes: safe-hole-perl (0.14-1) unstable; urgency=low . * New upstream release. * Bump debhelper compatibility to 13 (Closes: #965811). * Add watch file. * Add source format file * Bump Standards-Version to 4.5.0. Checksums-Sha1: 241170ba740a9e1b504f46822bb81cf7922d27b9 28804 libsafe-hole-perl-dbgsym_0.14-1_amd64.deb 82b0c7c4d203b7007ba82a1a8d1968c0a13f7a9b 12740 libsafe-hole-perl_0.14-1_amd64.deb 053e144a23fce69bd4e246710dbed3c4f94a1121 5250 safe-hole-perl_0.14-1_amd64.buildinfo Checksums-Sha256: ffa45497705587f29fc29e42765b87454c65b89483477c628518ec79cf85b278 28804 libsafe-hole-perl-dbgsym_0.14-1_amd64.deb f468a3f271267ef6d32a223370d20475f5f96f10b98e043697666ac9a8732416 12740 libsafe-hole-perl_0.14-1_amd64.deb 0eeb3ab9f69a579b9f6088f9b6218e0bfa84f0243bea3ce73cb326e31c40858b 5250 safe-hole-perl_0.14-1_amd64.buildinfo Files: 69d03f116120466c8e8e640c553b3c12 28804 debug optional libsafe-hole-perl-dbgsym_0.14-1_amd64.deb fe1bc990f86c33653df4a60b9f07ccf5 12740 perl optional libsafe-hole-perl_0.14-1_amd64.deb 1bb524188365a70c21324c28898ffee2 5250 perl optional safe-hole-perl_0.14-1_amd64.buildinfo Sat May 4 07:09:08 UTC 2024 I: diffoscope 265 will be used to compare the two builds: Running as unit: rb-diffoscope-amd64_28-19116.service # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.MJH2T65L/safe-hole-perl_0.14-1.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.MJH2T65L/safe-hole-perl_0.14-1.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.MJH2T65L/safe-hole-perl_0.14-1.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.MJH2T65L/b1/safe-hole-perl_0.14-1_amd64.changes /srv/reproducible-results/rbuild-debian/r-b-build.MJH2T65L/b2/safe-hole-perl_0.14-1_amd64.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.360s) 0.360s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.015s) 0.015s 12 calls diffoscope.comparators.binary.FilesystemFile ## specialize (total time: 0.000s) 0.000s 1 call specialize Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 695ms CPU time consumed: 696ms Sat May 4 07:09:09 UTC 2024 I: diffoscope 265 found no differences in the changes files, and a .buildinfo file also exists. Sat May 4 07:09:09 UTC 2024 I: safe-hole-perl from trixie built successfully and reproducibly on amd64. Sat May 4 07:09:11 UTC 2024 I: Submitting .buildinfo files to external archives: Sat May 4 07:09:11 UTC 2024 I: Submitting 8.0K b1/safe-hole-perl_0.14-1_amd64.buildinfo.asc Sat May 4 07:09:11 UTC 2024 I: Submitting 8.0K b2/safe-hole-perl_0.14-1_amd64.buildinfo.asc Sat May 4 07:09:12 UTC 2024 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Sat May 4 07:09:12 UTC 2024 I: Done submitting .buildinfo files. Sat May 4 07:09:12 UTC 2024 I: Removing signed safe-hole-perl_0.14-1_amd64.buildinfo.asc files: removed './b1/safe-hole-perl_0.14-1_amd64.buildinfo.asc' removed './b2/safe-hole-perl_0.14-1_amd64.buildinfo.asc'