Wed May 15 15:28:36 UTC 2024 I: starting to build clamz/trixie/amd64 on jenkins on '2024-05-15 15:28' Wed May 15 15:28:36 UTC 2024 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/amd64_24/20782/console.log Wed May 15 15:28:36 UTC 2024 I: Downloading source for trixie/clamz=0.5-2.1 --2024-05-15 15:28:36-- http://deb.debian.org/debian/pool/main/c/clamz/clamz_0.5-2.1.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 1881 (1.8K) [text/prs.lines.tag] Saving to: ‘clamz_0.5-2.1.dsc’ 0K . 100% 250M=0s 2024-05-15 15:28:36 (250 MB/s) - ‘clamz_0.5-2.1.dsc’ saved [1881/1881] Wed May 15 15:28:36 UTC 2024 I: clamz_0.5-2.1.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: clamz Binary: clamz Architecture: any Version: 0.5-2.1 Maintainer: Vincent Bernat Homepage: http://code.google.com/p/clamz/ Standards-Version: 3.9.5 Vcs-Browser: http://anonscm.debian.org/gitweb/?p=collab-maint/clamz.git Vcs-Git: git://anonscm.debian.org/collab-maint/clamz.git Build-Depends: debhelper (>= 7.0.50~), autotools-dev, pkg-config, libexpat1-dev, libgcrypt20-dev, libcurl4-gnutls-dev Package-List: clamz deb utils extra arch=any Checksums-Sha1: 54664614e5098f9e4e9240086745b94fe638b176 75001 clamz_0.5.orig.tar.gz bfc8fed05cb26670c3f09488f08429c46f1b7c49 2428 clamz_0.5-2.1.debian.tar.xz Checksums-Sha256: 5a63f23f15dfa6c2af00ff9531ae9bfcca0facfe5b1aa82790964f050a09832b 75001 clamz_0.5.orig.tar.gz ba8e56a657b5366b008d1ed5ded605a03f1367293bbe590a56843642bebc8a6c 2428 clamz_0.5-2.1.debian.tar.xz Files: 84543c9346b285bdc218879e241941a8 75001 clamz_0.5.orig.tar.gz b7c774d3cbd4d5ffe0361f6ce072b23b 2428 clamz_0.5-2.1.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQIzBAEBCgAdFiEE0uCSA5741Jbt9PpepU8BhUOCFIQFAlvUBWUACgkQpU8BhUOC FIRSOQ/9E7QTa6BkEzE8aM1Bm/fOrIybClmBTP7yYKH4K3t5nqUCDIKuUaJGJ08d Lobrv9y8VlRBFcZ0EsxHKyEzSCfsTit8vYyVVD1alzgREMVnInQPnlZg0/8VMPpa REywuuLoWnE1o8kfGAXe3nmwj9Frbs4oFxjcqv8mlZI3seHCYN6kAAxygI/b/6Me 46D5f3nlygevd3rWivPGHYgQ2e0M0YmWZ4wTdfpPvWYngsmExTR5JnivW0GtWzRt V4UqZSgTU8e9Eq6EhW4kmS5CBTd5c83tOSBGMY38tMN4Ew4Mp3COOHjzProxdllQ IdRJNPkdAW2SV6aL4sIp6hME8tU8NU0OAvqsxc/oTJU4lUPpe33NEsa2tDCt+vC1 H59uUjd0y53tafMLDGSaqXi8waxIavBFvarJ7Fs8h/NCSOlgbig6csTMkKifS9xz BwyH/HAFTkaHGi/vKq+JoHza381GrGbkglDKXxab7bnWoLBJTDITx22fYhwwF+b+ fBRm9k1tEWudxjs83GFHOIzB67UE6xYPCsqu5jrVLWYeHkcL8E4YsJ8PcDgRK6f9 vlATciT0ASyICUvfR9H/GuDytC9d4a/mljYwXFtTr49ZnnooNPRWMh/J8Qo0NFup QY4oqa/Vu2RXblRO4KkT6INdeLM7791jJX6h1+gZsNnqiYqtYNA= =PVw/ -----END PGP SIGNATURE----- Wed May 15 15:28:36 UTC 2024 I: Checking whether the package is not for us Wed May 15 15:28:36 UTC 2024 I: Starting 1st build on remote node ionos15-amd64.debian.net. Wed May 15 15:28:36 UTC 2024 I: Preparing to do remote build '1' on ionos15-amd64.debian.net. Wed May 15 15:29:12 UTC 2024 I: Deleting $TMPDIR on ionos15-amd64.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Tue Jun 17 09:51:39 -12 2025 I: pbuilder-time-stamp: 1750197099 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [clamz_0.5-2.1.dsc] I: copying [./clamz_0.5.orig.tar.gz] I: copying [./clamz_0.5-2.1.debian.tar.xz] I: Extracting source gpgv: Signature made Sat Oct 27 06:27:49 2018 gpgv: using RSA key D2E092039EF8D496EDF4FA5EA54F018543821484 gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./clamz_0.5-2.1.dsc: no acceptable signature found dpkg-source: info: extracting clamz in clamz-0.5 dpkg-source: info: unpacking clamz_0.5.orig.tar.gz dpkg-source: info: unpacking clamz_0.5-2.1.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying fix-clamz-desktop.patch I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/1212352/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='amd64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=42 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='amd64' IFS=' ' INVOCATION_ID='20c585cfc96f4108b5be7bb0a9d5387f' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='1212352' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.fxS8vake/pbuilderrc_MWMV --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.fxS8vake/b1 --logfile b1/build.log clamz_0.5-2.1.dsc' SUDO_GID='111' SUDO_UID='106' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://213.165.73.152:3128' I: uname -a Linux ionos15-amd64 6.6.13+bpo-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.6.13-1~bpo12+1 (2024-02-15) x86_64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Jun 17 17:46 /bin -> usr/bin I: user script /srv/workspace/pbuilder/1212352/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: amd64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper (>= 7.0.50~), autotools-dev, pkg-config, libexpat1-dev, libgcrypt20-dev, libcurl4-gnutls-dev dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19699 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper (>= 7.0.50~); however: Package debhelper is not installed. pbuilder-satisfydepends-dummy depends on autotools-dev; however: Package autotools-dev is not installed. pbuilder-satisfydepends-dummy depends on pkg-config; however: Package pkg-config is not installed. pbuilder-satisfydepends-dummy depends on libexpat1-dev; however: Package libexpat1-dev is not installed. pbuilder-satisfydepends-dummy depends on libgcrypt20-dev; however: Package libgcrypt20-dev is not installed. pbuilder-satisfydepends-dummy depends on libcurl4-gnutls-dev; however: Package libcurl4-gnutls-dev is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libbrotli1{a} libcom-err2{a} libcurl3t64-gnutls{a} libcurl4-gnutls-dev{a} libdebhelper-perl{a} libelf1t64{a} libexpat1{a} libexpat1-dev{a} libfile-stripnondeterminism-perl{a} libgcrypt20-dev{a} libgpg-error-dev{a} libgssapi-krb5-2{a} libicu72{a} libk5crypto3{a} libkeyutils1{a} libkrb5-3{a} libkrb5support0{a} libldap-2.5-0{a} libmagic-mgc{a} libmagic1t64{a} libnghttp2-14{a} libpipeline1{a} libpkgconf3{a} libpsl5t64{a} librtmp1{a} libsasl2-2{a} libsasl2-modules-db{a} libssh2-1t64{a} libsub-override-perl{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} pkg-config{a} pkgconf{a} pkgconf-bin{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: ca-certificates curl krb5-locales libarchive-cpio-perl libldap-common libltdl-dev libmail-sendmail-perl libsasl2-modules lynx publicsuffix wget 0 packages upgraded, 54 newly installed, 0 to remove and 0 not upgraded. Need to get 22.9 MB of archives. After unpacking 85.8 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main amd64 sensible-utils all 0.0.22 [22.4 kB] Get: 2 http://deb.debian.org/debian trixie/main amd64 libmagic-mgc amd64 1:5.45-3 [314 kB] Get: 3 http://deb.debian.org/debian trixie/main amd64 libmagic1t64 amd64 1:5.45-3 [105 kB] Get: 4 http://deb.debian.org/debian trixie/main amd64 file amd64 1:5.45-3 [42.9 kB] Get: 5 http://deb.debian.org/debian trixie/main amd64 gettext-base amd64 0.21-14+b1 [161 kB] Get: 6 http://deb.debian.org/debian trixie/main amd64 libuchardet0 amd64 0.0.8-1+b1 [68.8 kB] Get: 7 http://deb.debian.org/debian trixie/main amd64 groff-base amd64 1.23.0-4 [1180 kB] Get: 8 http://deb.debian.org/debian trixie/main amd64 bsdextrautils amd64 2.40-8 [92.8 kB] Get: 9 http://deb.debian.org/debian trixie/main amd64 libpipeline1 amd64 1.5.7-2 [38.0 kB] Get: 10 http://deb.debian.org/debian trixie/main amd64 man-db amd64 2.12.1-1 [1411 kB] Get: 11 http://deb.debian.org/debian trixie/main amd64 m4 amd64 1.4.19-4 [287 kB] Get: 12 http://deb.debian.org/debian trixie/main amd64 autoconf all 2.71-3 [332 kB] Get: 13 http://deb.debian.org/debian trixie/main amd64 autotools-dev all 20220109.1 [51.6 kB] Get: 14 http://deb.debian.org/debian trixie/main amd64 automake all 1:1.16.5-1.3 [823 kB] Get: 15 http://deb.debian.org/debian trixie/main amd64 autopoint all 0.21-14 [496 kB] Get: 16 http://deb.debian.org/debian trixie/main amd64 libdebhelper-perl all 13.15.3 [88.0 kB] Get: 17 http://deb.debian.org/debian trixie/main amd64 libtool all 2.4.7-7 [517 kB] Get: 18 http://deb.debian.org/debian trixie/main amd64 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian trixie/main amd64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian trixie/main amd64 libsub-override-perl all 0.10-1 [10.6 kB] Get: 21 http://deb.debian.org/debian trixie/main amd64 libfile-stripnondeterminism-perl all 1.13.1-1 [19.4 kB] Get: 22 http://deb.debian.org/debian trixie/main amd64 dh-strip-nondeterminism all 1.13.1-1 [8620 B] Get: 23 http://deb.debian.org/debian trixie/main amd64 libelf1t64 amd64 0.191-1+b1 [189 kB] Get: 24 http://deb.debian.org/debian trixie/main amd64 dwz amd64 0.15-1+b1 [110 kB] Get: 25 http://deb.debian.org/debian trixie/main amd64 libicu72 amd64 72.1-4+b1 [9395 kB] Get: 26 http://deb.debian.org/debian trixie/main amd64 libxml2 amd64 2.9.14+dfsg-1.3+b3 [692 kB] Get: 27 http://deb.debian.org/debian trixie/main amd64 gettext amd64 0.21-14+b1 [1301 kB] Get: 28 http://deb.debian.org/debian trixie/main amd64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 29 http://deb.debian.org/debian trixie/main amd64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 30 http://deb.debian.org/debian trixie/main amd64 debhelper all 13.15.3 [901 kB] Get: 31 http://deb.debian.org/debian trixie/main amd64 libbrotli1 amd64 1.1.0-2+b3 [305 kB] Get: 32 http://deb.debian.org/debian trixie/main amd64 libcom-err2 amd64 1.47.1~rc2-1 [22.6 kB] Get: 33 http://deb.debian.org/debian trixie/main amd64 libkrb5support0 amd64 1.20.1-6+b1 [33.3 kB] Get: 34 http://deb.debian.org/debian trixie/main amd64 libk5crypto3 amd64 1.20.1-6+b1 [79.8 kB] Get: 35 http://deb.debian.org/debian trixie/main amd64 libkeyutils1 amd64 1.6.3-3 [8952 B] Get: 36 http://deb.debian.org/debian trixie/main amd64 libkrb5-3 amd64 1.20.1-6+b1 [333 kB] Get: 37 http://deb.debian.org/debian trixie/main amd64 libgssapi-krb5-2 amd64 1.20.1-6+b1 [135 kB] Get: 38 http://deb.debian.org/debian trixie/main amd64 libsasl2-modules-db amd64 2.1.28+dfsg1-6 [19.5 kB] Get: 39 http://deb.debian.org/debian trixie/main amd64 libsasl2-2 amd64 2.1.28+dfsg1-6 [56.9 kB] Get: 40 http://deb.debian.org/debian trixie/main amd64 libldap-2.5-0 amd64 2.5.17+dfsg-1 [186 kB] Get: 41 http://deb.debian.org/debian trixie/main amd64 libnghttp2-14 amd64 1.61.0-1+b1 [75.6 kB] Get: 42 http://deb.debian.org/debian trixie/main amd64 libpsl5t64 amd64 0.21.2-1.1 [56.8 kB] Get: 43 http://deb.debian.org/debian trixie/main amd64 librtmp1 amd64 2.4+20151223.gitfa8646d.1-2+b4 [58.5 kB] Get: 44 http://deb.debian.org/debian trixie/main amd64 libssh2-1t64 amd64 1.11.0-4.1+b2 [215 kB] Get: 45 http://deb.debian.org/debian trixie/main amd64 libcurl3t64-gnutls amd64 8.7.1-5 [433 kB] Get: 46 http://deb.debian.org/debian trixie/main amd64 libcurl4-gnutls-dev amd64 8.7.1-5 [538 kB] Get: 47 http://deb.debian.org/debian trixie/main amd64 libexpat1 amd64 2.6.2-1 [103 kB] Get: 48 http://deb.debian.org/debian trixie/main amd64 libexpat1-dev amd64 2.6.2-1 [155 kB] Get: 49 http://deb.debian.org/debian trixie/main amd64 libgpg-error-dev amd64 1.49-2 [138 kB] Get: 50 http://deb.debian.org/debian trixie/main amd64 libgcrypt20-dev amd64 1.10.3-2+b1 [764 kB] Get: 51 http://deb.debian.org/debian trixie/main amd64 libpkgconf3 amd64 1.8.1-1+b2 [36.4 kB] Get: 52 http://deb.debian.org/debian trixie/main amd64 pkgconf-bin amd64 1.8.1-1+b2 [29.7 kB] Get: 53 http://deb.debian.org/debian trixie/main amd64 pkgconf amd64 1.8.1-1+b2 [26.2 kB] Get: 54 http://deb.debian.org/debian trixie/main amd64 pkg-config amd64 1.8.1-1+b2 [14.0 kB] Fetched 22.9 MB in 0s (129 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19699 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.22_all.deb ... Unpacking sensible-utils (0.0.22) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3_amd64.deb ... Unpacking libmagic-mgc (1:5.45-3) ... Selecting previously unselected package libmagic1t64:amd64. Preparing to unpack .../02-libmagic1t64_1%3a5.45-3_amd64.deb ... Unpacking libmagic1t64:amd64 (1:5.45-3) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-3_amd64.deb ... Unpacking file (1:5.45-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.21-14+b1_amd64.deb ... Unpacking gettext-base (0.21-14+b1) ... Selecting previously unselected package libuchardet0:amd64. Preparing to unpack .../05-libuchardet0_0.0.8-1+b1_amd64.deb ... Unpacking libuchardet0:amd64 (0.0.8-1+b1) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-4_amd64.deb ... Unpacking groff-base (1.23.0-4) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.40-8_amd64.deb ... Unpacking bsdextrautils (2.40-8) ... Selecting previously unselected package libpipeline1:amd64. Preparing to unpack .../08-libpipeline1_1.5.7-2_amd64.deb ... Unpacking libpipeline1:amd64 (1.5.7-2) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.12.1-1_amd64.deb ... Unpacking man-db (2.12.1-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-4_amd64.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.71-3_all.deb ... Unpacking autoconf (2.71-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.21-14_all.deb ... Unpacking autopoint (0.21-14) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.15.3_all.deb ... Unpacking libdebhelper-perl (13.15.3) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.4.7-7_all.deb ... Unpacking libtool (2.4.7-7) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libsub-override-perl. Preparing to unpack .../19-libsub-override-perl_0.10-1_all.deb ... Unpacking libsub-override-perl (0.10-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../20-libfile-stripnondeterminism-perl_1.13.1-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.13.1-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../21-dh-strip-nondeterminism_1.13.1-1_all.deb ... Unpacking dh-strip-nondeterminism (1.13.1-1) ... Selecting previously unselected package libelf1t64:amd64. Preparing to unpack .../22-libelf1t64_0.191-1+b1_amd64.deb ... Unpacking libelf1t64:amd64 (0.191-1+b1) ... Selecting previously unselected package dwz. Preparing to unpack .../23-dwz_0.15-1+b1_amd64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libicu72:amd64. Preparing to unpack .../24-libicu72_72.1-4+b1_amd64.deb ... Unpacking libicu72:amd64 (72.1-4+b1) ... Selecting previously unselected package libxml2:amd64. Preparing to unpack .../25-libxml2_2.9.14+dfsg-1.3+b3_amd64.deb ... Unpacking libxml2:amd64 (2.9.14+dfsg-1.3+b3) ... Selecting previously unselected package gettext. Preparing to unpack .../26-gettext_0.21-14+b1_amd64.deb ... Unpacking gettext (0.21-14+b1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../27-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../28-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../29-debhelper_13.15.3_all.deb ... Unpacking debhelper (13.15.3) ... Selecting previously unselected package libbrotli1:amd64. Preparing to unpack .../30-libbrotli1_1.1.0-2+b3_amd64.deb ... Unpacking libbrotli1:amd64 (1.1.0-2+b3) ... Selecting previously unselected package libcom-err2:amd64. Preparing to unpack .../31-libcom-err2_1.47.1~rc2-1_amd64.deb ... Unpacking libcom-err2:amd64 (1.47.1~rc2-1) ... Selecting previously unselected package libkrb5support0:amd64. Preparing to unpack .../32-libkrb5support0_1.20.1-6+b1_amd64.deb ... Unpacking libkrb5support0:amd64 (1.20.1-6+b1) ... Selecting previously unselected package libk5crypto3:amd64. Preparing to unpack .../33-libk5crypto3_1.20.1-6+b1_amd64.deb ... Unpacking libk5crypto3:amd64 (1.20.1-6+b1) ... Selecting previously unselected package libkeyutils1:amd64. Preparing to unpack .../34-libkeyutils1_1.6.3-3_amd64.deb ... Unpacking libkeyutils1:amd64 (1.6.3-3) ... Selecting previously unselected package libkrb5-3:amd64. Preparing to unpack .../35-libkrb5-3_1.20.1-6+b1_amd64.deb ... Unpacking libkrb5-3:amd64 (1.20.1-6+b1) ... Selecting previously unselected package libgssapi-krb5-2:amd64. Preparing to unpack .../36-libgssapi-krb5-2_1.20.1-6+b1_amd64.deb ... Unpacking libgssapi-krb5-2:amd64 (1.20.1-6+b1) ... Selecting previously unselected package libsasl2-modules-db:amd64. Preparing to unpack .../37-libsasl2-modules-db_2.1.28+dfsg1-6_amd64.deb ... Unpacking libsasl2-modules-db:amd64 (2.1.28+dfsg1-6) ... Selecting previously unselected package libsasl2-2:amd64. Preparing to unpack .../38-libsasl2-2_2.1.28+dfsg1-6_amd64.deb ... Unpacking libsasl2-2:amd64 (2.1.28+dfsg1-6) ... Selecting previously unselected package libldap-2.5-0:amd64. Preparing to unpack .../39-libldap-2.5-0_2.5.17+dfsg-1_amd64.deb ... Unpacking libldap-2.5-0:amd64 (2.5.17+dfsg-1) ... Selecting previously unselected package libnghttp2-14:amd64. Preparing to unpack .../40-libnghttp2-14_1.61.0-1+b1_amd64.deb ... Unpacking libnghttp2-14:amd64 (1.61.0-1+b1) ... Selecting previously unselected package libpsl5t64:amd64. Preparing to unpack .../41-libpsl5t64_0.21.2-1.1_amd64.deb ... Unpacking libpsl5t64:amd64 (0.21.2-1.1) ... Selecting previously unselected package librtmp1:amd64. Preparing to unpack .../42-librtmp1_2.4+20151223.gitfa8646d.1-2+b4_amd64.deb ... Unpacking librtmp1:amd64 (2.4+20151223.gitfa8646d.1-2+b4) ... Selecting previously unselected package libssh2-1t64:amd64. Preparing to unpack .../43-libssh2-1t64_1.11.0-4.1+b2_amd64.deb ... Unpacking libssh2-1t64:amd64 (1.11.0-4.1+b2) ... Selecting previously unselected package libcurl3t64-gnutls:amd64. Preparing to unpack .../44-libcurl3t64-gnutls_8.7.1-5_amd64.deb ... Unpacking libcurl3t64-gnutls:amd64 (8.7.1-5) ... Selecting previously unselected package libcurl4-gnutls-dev:amd64. Preparing to unpack .../45-libcurl4-gnutls-dev_8.7.1-5_amd64.deb ... Unpacking libcurl4-gnutls-dev:amd64 (8.7.1-5) ... Selecting previously unselected package libexpat1:amd64. Preparing to unpack .../46-libexpat1_2.6.2-1_amd64.deb ... Unpacking libexpat1:amd64 (2.6.2-1) ... Selecting previously unselected package libexpat1-dev:amd64. Preparing to unpack .../47-libexpat1-dev_2.6.2-1_amd64.deb ... Unpacking libexpat1-dev:amd64 (2.6.2-1) ... Selecting previously unselected package libgpg-error-dev:amd64. Preparing to unpack .../48-libgpg-error-dev_1.49-2_amd64.deb ... Unpacking libgpg-error-dev:amd64 (1.49-2) ... Selecting previously unselected package libgcrypt20-dev. Preparing to unpack .../49-libgcrypt20-dev_1.10.3-2+b1_amd64.deb ... Unpacking libgcrypt20-dev (1.10.3-2+b1) ... Selecting previously unselected package libpkgconf3:amd64. Preparing to unpack .../50-libpkgconf3_1.8.1-1+b2_amd64.deb ... Unpacking libpkgconf3:amd64 (1.8.1-1+b2) ... Selecting previously unselected package pkgconf-bin. Preparing to unpack .../51-pkgconf-bin_1.8.1-1+b2_amd64.deb ... Unpacking pkgconf-bin (1.8.1-1+b2) ... Selecting previously unselected package pkgconf:amd64. Preparing to unpack .../52-pkgconf_1.8.1-1+b2_amd64.deb ... Unpacking pkgconf:amd64 (1.8.1-1+b2) ... Selecting previously unselected package pkg-config:amd64. Preparing to unpack .../53-pkg-config_1.8.1-1+b2_amd64.deb ... Unpacking pkg-config:amd64 (1.8.1-1+b2) ... Setting up libexpat1:amd64 (2.6.2-1) ... Setting up libpipeline1:amd64 (1.5.7-2) ... Setting up libkeyutils1:amd64 (1.6.3-3) ... Setting up libicu72:amd64 (72.1-4+b1) ... Setting up bsdextrautils (2.40-8) ... Setting up libmagic-mgc (1:5.45-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.15.3) ... Setting up libbrotli1:amd64 (1.1.0-2+b3) ... Setting up libmagic1t64:amd64 (1:5.45-3) ... Setting up libpsl5t64:amd64 (0.21.2-1.1) ... Setting up libnghttp2-14:amd64 (1.61.0-1+b1) ... Setting up gettext-base (0.21-14+b1) ... Setting up m4 (1.4.19-4) ... Setting up libcom-err2:amd64 (1.47.1~rc2-1) ... Setting up file (1:5.45-3) ... Setting up libelf1t64:amd64 (0.191-1+b1) ... Setting up libkrb5support0:amd64 (1.20.1-6+b1) ... Setting up libsasl2-modules-db:amd64 (2.1.28+dfsg1-6) ... Setting up autotools-dev (20220109.1) ... Setting up libpkgconf3:amd64 (1.8.1-1+b2) ... Setting up libexpat1-dev:amd64 (2.6.2-1) ... Setting up libgpg-error-dev:amd64 (1.49-2) ... Setting up librtmp1:amd64 (2.4+20151223.gitfa8646d.1-2+b4) ... Setting up autopoint (0.21-14) ... Setting up pkgconf-bin (1.8.1-1+b2) ... Setting up libk5crypto3:amd64 (1.20.1-6+b1) ... Setting up libsasl2-2:amd64 (2.1.28+dfsg1-6) ... Setting up autoconf (2.71-3) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.22) ... Setting up libuchardet0:amd64 (0.0.8-1+b1) ... Setting up libsub-override-perl (0.10-1) ... Setting up libkrb5-3:amd64 (1.20.1-6+b1) ... Setting up libssh2-1t64:amd64 (1.11.0-4.1+b2) ... Setting up libxml2:amd64 (2.9.14+dfsg-1.3+b3) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.13.1-1) ... Setting up gettext (0.21-14+b1) ... Setting up libtool (2.4.7-7) ... Setting up libldap-2.5-0:amd64 (2.5.17+dfsg-1) ... Setting up pkgconf:amd64 (1.8.1-1+b2) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up libgcrypt20-dev (1.10.3-2+b1) ... Setting up libgssapi-krb5-2:amd64 (1.20.1-6+b1) ... Setting up pkg-config:amd64 (1.8.1-1+b2) ... Setting up dh-strip-nondeterminism (1.13.1-1) ... Setting up groff-base (1.23.0-4) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up libcurl3t64-gnutls:amd64 (8.7.1-5) ... Setting up libcurl4-gnutls-dev:amd64 (8.7.1-5) ... Setting up man-db (2.12.1-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.15.3) ... Processing triggers for libc-bin (2.38-10) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.33-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/reproducible-path/clamz-0.5/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../clamz_0.5-2.1_source.changes dpkg-buildpackage: info: source package clamz dpkg-buildpackage: info: source version 0.5-2.1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Andreas Metzler dpkg-source --before-build . dpkg-buildpackage: info: host architecture amd64 fakeroot debian/rules clean dh clean dh: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_clean dh_clean: warning: Compatibility levels before 10 are deprecated (level 7 in use) debian/rules build dh build dh: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_update_autotools_config dh_auto_configure dh_auto_configure: warning: Compatibility levels before 10 are deprecated (level 7 in use) ./configure --build=x86_64-linux-gnu --prefix=/usr --includedir=\${prefix}/include --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info --sysconfdir=/etc --localstatedir=/var --disable-option-checking --disable-silent-rules --libexecdir=\${prefix}/lib/clamz --disable-maintainer-mode --disable-dependency-tracking checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking for a BSD-compatible install... /usr/bin/install -c checking for update-mime-database... : checking for update-desktop-database... : checking for XML_ParserCreate in -lexpat... yes checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for LIBCURL... yes checking for libgcrypt-config... /usr/bin/libgcrypt-config checking for LIBGCRYPT - version >= 1.2.0... yes (1.10.3) checking LIBGCRYPT API version... okay checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for size_t... yes checking for off_t... yes checking for special C compiler options needed for large files... no checking for _FILE_OFFSET_BITS value needed for large files... no configure: creating ./config.status config.status: creating Makefile config.status: creating config.h dh_auto_build dh_auto_build: warning: Compatibility levels before 10 are deprecated (level 7 in use) make -j1 make[1]: Entering directory '/build/reproducible-path/clamz-0.5' gcc -g -O2 -W -Wall -I/usr/include/x86_64-linux-gnu -I. -DHAVE_CONFIG_H -c ./clamz.c gcc -g -O2 -W -Wall -I/usr/include/x86_64-linux-gnu -I. -DHAVE_CONFIG_H -c ./options.c gcc -g -O2 -W -Wall -I/usr/include/x86_64-linux-gnu -I. -DHAVE_CONFIG_H -c ./playlist.c gcc -g -O2 -W -Wall -I/usr/include/x86_64-linux-gnu -I. -DHAVE_CONFIG_H -c ./download.c ./download.c: In function 'download_track': ./download.c:319:5: warning: 'CURLOPT_PROGRESSFUNCTION' is deprecated: since 7.32.0. Use CURLOPT_XFERINFOFUNCTION [-Wdeprecated-declarations] 319 | curl_easy_setopt(dl->curl, CURLOPT_PROGRESSFUNCTION, show_progress); | ^~~~~~~~~~~~~~~~ In file included from ./download.c:31: /usr/include/x86_64-linux-gnu/curl/curl.h:1291:3: note: declared here 1291 | CURLOPTDEPRECATED(CURLOPT_PROGRESSFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 56, | ^~~~~~~~~~~~~~~~~ gcc -g -O2 -W -Wall -I/usr/include/x86_64-linux-gnu -I. -DHAVE_CONFIG_H -c ./vars.c gcc -g -O2 -W -Wall -o clamz clamz.o options.o playlist.o download.o vars.o -L/usr/lib/x86_64-linux-gnu -lgcrypt -lcurl -lexpat make[1]: Leaving directory '/build/reproducible-path/clamz-0.5' dh_auto_test dh_auto_test: warning: Compatibility levels before 10 are deprecated (level 7 in use) fakeroot debian/rules binary dh binary dh: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_testroot dh_prep dh_auto_install --destdir=debian/clamz/ dh_auto_install: warning: Compatibility levels before 10 are deprecated (level 7 in use) make -j1 install DESTDIR=/build/reproducible-path/clamz-0.5/debian/clamz AM_UPDATE_INFO_DIR=no make[1]: Entering directory '/build/reproducible-path/clamz-0.5' /usr/bin/install -c -d -m 755 /build/reproducible-path/clamz-0.5/debian/clamz/usr/bin /usr/bin/install -c -m 755 clamz /build/reproducible-path/clamz-0.5/debian/clamz/usr/bin /usr/bin/install -c -d -m 755 /build/reproducible-path/clamz-0.5/debian/clamz/usr/share/man/man1 /usr/bin/install -c -m 644 ./clamz.1 /build/reproducible-path/clamz-0.5/debian/clamz/usr/share/man/man1 /usr/bin/install -c -d -m 755 /build/reproducible-path/clamz-0.5/debian/clamz/usr/share/applications /usr/bin/install -c -m 644 ./clamz.desktop /build/reproducible-path/clamz-0.5/debian/clamz/usr/share/applications : /build/reproducible-path/clamz-0.5/debian/clamz/usr/share/applications /usr/bin/install -c -d -m 755 /build/reproducible-path/clamz-0.5/debian/clamz/usr/share/mime/packages /usr/bin/install -c -m 644 ./clamz.xml /build/reproducible-path/clamz-0.5/debian/clamz/usr/share/mime/packages : /build/reproducible-path/clamz-0.5/debian/clamz/usr/share/mime make[1]: Leaving directory '/build/reproducible-path/clamz-0.5' dh_installdocs dh_installdocs: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_installchangelogs dh_installchangelogs: warning: Compatibility levels before 10 are deprecated (level 7 in use) debian/rules override_dh_installman make[1]: Entering directory '/build/reproducible-path/clamz-0.5' dh_installman clamz.1 dh_installman: warning: Compatibility levels before 10 are deprecated (level 7 in use) make[1]: Leaving directory '/build/reproducible-path/clamz-0.5' dh_perl dh_link dh_strip_nondeterminism dh_compress dh_compress: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_fixperms dh_missing dh_missing: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_strip dh_strip: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_makeshlibs dh_makeshlibs: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_shlibdeps dh_shlibdeps: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_installdeb dh_installdeb: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_gencontrol dh_gencontrol: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_md5sums dh_builddeb dpkg-deb: building package 'clamz' in '../clamz_0.5-2.1_amd64.deb'. dpkg-deb: building package 'clamz-dbgsym' in '../clamz-dbgsym_0.5-2.1_amd64.deb'. dpkg-genbuildinfo --build=binary -O../clamz_0.5-2.1_amd64.buildinfo dpkg-genchanges --build=binary -O../clamz_0.5-2.1_amd64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/1212352 and its subdirectories I: Current time: Tue Jun 17 09:52:11 -12 2025 I: pbuilder-time-stamp: 1750197131 Wed May 15 15:29:13 UTC 2024 I: 1st build successful. Starting 2nd build on remote node ionos11-amd64.debian.net. Wed May 15 15:29:13 UTC 2024 I: Preparing to do remote build '2' on ionos11-amd64.debian.net. Wed May 15 15:32:18 UTC 2024 I: Deleting $TMPDIR on ionos11-amd64.debian.net. Wed May 15 15:32:19 UTC 2024 I: clamz_0.5-2.1_amd64.changes: Format: 1.8 Date: Sat, 27 Oct 2018 08:24:18 +0200 Source: clamz Binary: clamz clamz-dbgsym Architecture: amd64 Version: 0.5-2.1 Distribution: unstable Urgency: low Maintainer: Vincent Bernat Changed-By: Andreas Metzler Description: clamz - command-line program to download MP3's from Amazon Closes: 864098 Changes: clamz (0.5-2.1) unstable; urgency=low . * Non-maintainer upload. * B-d on libgcrypt20-dev instead of libgcrypt11-dev. Closes: #864098 Checksums-Sha1: 9d240b7ce433575e7dd7cce4cd3c4f74da5542ee 45908 clamz-dbgsym_0.5-2.1_amd64.deb dc22874ddd27e3b1cae4e46e06adfbb4ed29d920 6047 clamz_0.5-2.1_amd64.buildinfo 32ca278d0513044ed52981b97e3cfe2ebc4ceafe 22932 clamz_0.5-2.1_amd64.deb Checksums-Sha256: 336bb46fad87b89ec71a852fcb3e43297752f9297ee7e2e2cc80d5f5f2752811 45908 clamz-dbgsym_0.5-2.1_amd64.deb 86ad6de99f48e87749c86282023e447989647003a7bb6089b42e059cc6be6462 6047 clamz_0.5-2.1_amd64.buildinfo 73a26016c294a724a42343cc66cb960d18a6f525a1418dc632782a1ee02f6270 22932 clamz_0.5-2.1_amd64.deb Files: 037fc104b163ebf5d31b01808c61f94d 45908 debug optional clamz-dbgsym_0.5-2.1_amd64.deb c1a41d59d28f2c3caef5f4fca6ab432d 6047 utils extra clamz_0.5-2.1_amd64.buildinfo 3552248ccf7cb834be6f5c9aa02bafd3 22932 utils extra clamz_0.5-2.1_amd64.deb Wed May 15 15:32:20 UTC 2024 I: diffoscope 266 will be used to compare the two builds: Running as unit: rb-diffoscope-amd64_24-20782.service # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.fxS8vake/clamz_0.5-2.1.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.fxS8vake/clamz_0.5-2.1.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.fxS8vake/clamz_0.5-2.1.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.fxS8vake/b1/clamz_0.5-2.1_amd64.changes /srv/reproducible-results/rbuild-debian/r-b-build.fxS8vake/b2/clamz_0.5-2.1_amd64.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.368s) 0.368s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.015s) 0.015s 12 calls diffoscope.comparators.binary.FilesystemFile ## specialize (total time: 0.000s) 0.000s 1 call specialize Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 709ms CPU time consumed: 710ms Wed May 15 15:32:22 UTC 2024 I: diffoscope 266 found no differences in the changes files, and a .buildinfo file also exists. Wed May 15 15:32:22 UTC 2024 I: clamz from trixie built successfully and reproducibly on amd64. Wed May 15 15:32:23 UTC 2024 I: Submitting .buildinfo files to external archives: Wed May 15 15:32:23 UTC 2024 I: Submitting 8.0K b1/clamz_0.5-2.1_amd64.buildinfo.asc Wed May 15 15:32:24 UTC 2024 I: Submitting 8.0K b2/clamz_0.5-2.1_amd64.buildinfo.asc Wed May 15 15:32:25 UTC 2024 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Wed May 15 15:32:25 UTC 2024 I: Done submitting .buildinfo files. Wed May 15 15:32:25 UTC 2024 I: Removing signed clamz_0.5-2.1_amd64.buildinfo.asc files: removed './b1/clamz_0.5-2.1_amd64.buildinfo.asc' removed './b2/clamz_0.5-2.1_amd64.buildinfo.asc'