Sun Dec 8 20:36:58 UTC 2024 I: starting to build bottlerocket/trixie/amd64 on jenkins on '2024-12-08 20:36' Sun Dec 8 20:36:58 UTC 2024 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/amd64_10/24508/console.log Sun Dec 8 20:36:58 UTC 2024 I: Downloading source for trixie/bottlerocket=0.05b3-20 --2024-12-08 20:36:58-- http://deb.debian.org/debian/pool/main/b/bottlerocket/bottlerocket_0.05b3-20.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2075 (2.0K) [text/prs.lines.tag] Saving to: ‘bottlerocket_0.05b3-20.dsc’ 0K .. 100% 311M=0s 2024-12-08 20:36:58 (311 MB/s) - ‘bottlerocket_0.05b3-20.dsc’ saved [2075/2075] Sun Dec 8 20:36:58 UTC 2024 I: bottlerocket_0.05b3-20.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: bottlerocket Binary: bottlerocket Architecture: any Version: 0.05b3-20 Maintainer: Thorsten Alteholz Homepage: http://www.linuxha.com/bottlerocket/ Standards-Version: 4.7.0 Vcs-Browser: https://salsa.debian.org/alteholz/bottlerocket Vcs-Git: https://salsa.debian.org/alteholz/bottlerocket.git Build-Depends: debhelper-compat (= 13), po-debconf, autoconf Package-List: bottlerocket deb electronics optional arch=any Checksums-Sha1: 5d995d812917a62449558f75729797bb33b6fd13 42973 bottlerocket_0.05b3.orig.tar.gz 95448a5e653b00c729b625017c54b3e6e4b77430 13248 bottlerocket_0.05b3-20.debian.tar.xz Checksums-Sha256: 950396512ec900162b211589d1e0e26f3497c27ac62aaf9d2482a256aad0571a 42973 bottlerocket_0.05b3.orig.tar.gz d068c4efba6fb9cbcf1a99c1b35deb77383dc4318617eab18d2f0fa865b9c08d 13248 bottlerocket_0.05b3-20.debian.tar.xz Files: a24f1ce6b71ac4f1015739c85eb790ae 42973 bottlerocket_0.05b3.orig.tar.gz d28ac2f032847bb6fbc954510016e90d 13248 bottlerocket_0.05b3-20.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQKnBAEBCgCRFiEEYgH7/9u94Hgi6ruWlvysDTh7WEcFAmamyEhfFIAAAAAALgAo aXNzdWVyLWZwckBub3RhdGlvbnMub3BlbnBncC5maWZ0aGhvcnNlbWFuLm5ldDYy MDFGQkZGREJCREUwNzgyMkVBQkI5Njk2RkNBQzBEMzg3QjU4NDcTHGRlYmlhbkBh bHRlaG9sei5kZQAKCRCW/KwNOHtYRzUAD/4jOrLzQkd2QYsl+8bwt2mcltvPCUvV XQkUJCF4nZLGZAwDjYudqI7CzE/o13r0ce4mNgsxe9DcCll2zfoSaHt7iR7np9u5 X+bM0545FRBAJzdbq2so4gIIuXZdWr04Qw9ZRy1wODvwqyCL76B7AX8/Hi/LG8PQ rRVSWz9j58YE06bda7yp6AvW7aEOg60GQsv6lrAt+GHRirrOgsSxUNiGVZLTejZX O/91JoYwu20/zDeS8TcIjUDlh/PkBVPvjgAQ89vOS54p8WACoY1IbXWt+WEBUZBL WhA29/MZUdp7LdR33uQryZ+FNlTWLiT2oP2UeC6r9Zqgx5D8zngtGKHpdMzZ/E8r mHNmL9XTdQWXqSw+q+oFqXkd/YmpEOYxJFEMUHYXczVeyb/NTE6nnJCloeOc1Zy6 fCA60Q0x9XwCi2giQRgO4KljwpdDr9XcoL3JbDyzLJhkWw6+h6xNBZQJ1MPj+r8y Ts+8Vy9sv6uojB/Xd+yQ9fbv3EthqqGmNDZTzNzGa+41m5Vwbrud5xhRKDJ5ldrq EJ3HetsfnyBPtYOin6iG/SRWiHg3PsL6m3vOq27fzKwxc/INmhBbH3jS7w2qGS7U 6UTdZ8kgbsNW86ArgGXhUQ42EKnaYWkYR3ttWzSKhASIU+xomBRmY3goM8juo7/g Y3scgpc1ntglog== =hL93 -----END PGP SIGNATURE----- Sun Dec 8 20:36:58 UTC 2024 I: Checking whether the package is not for us Sun Dec 8 20:36:58 UTC 2024 I: Starting 1st build on remote node ionos5-amd64.debian.net. Sun Dec 8 20:36:58 UTC 2024 I: Preparing to do remote build '1' on ionos5-amd64.debian.net. Sun Dec 8 20:38:12 UTC 2024 I: Deleting $TMPDIR on ionos5-amd64.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Sat Jan 10 15:00:00 -12 2026 I: pbuilder-time-stamp: 1768100400 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [bottlerocket_0.05b3-20.dsc] I: copying [./bottlerocket_0.05b3.orig.tar.gz] I: copying [./bottlerocket_0.05b3-20.debian.tar.xz] I: Extracting source gpgv: Signature made Sun Jul 28 22:38:00 2024 gpgv: using RSA key 6201FBFFDBBDE07822EABB9696FCAC0D387B5847 gpgv: issuer "debian@alteholz.de" gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./bottlerocket_0.05b3-20.dsc: no acceptable signature found dpkg-source: info: extracting bottlerocket in bottlerocket-0.05b3 dpkg-source: info: unpacking bottlerocket_0.05b3.orig.tar.gz dpkg-source: info: unpacking bottlerocket_0.05b3-20.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying direct-changes dpkg-source: info: applying gcc-14.patch I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/1555681/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='amd64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=42 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='amd64' IFS=' ' INVOCATION_ID='51f537fded884b1e946aff85c93d119f' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='1555681' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.IdkbAUh0/pbuilderrc_vOIS --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.IdkbAUh0/b1 --logfile b1/build.log bottlerocket_0.05b3-20.dsc' SUDO_GID='110' SUDO_UID='105' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://213.165.73.152:3128' I: uname -a Linux ionos5-amd64 6.11.5+bpo-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.11.5-1~bpo12+1 (2024-11-11) x86_64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Nov 22 2024 /bin -> usr/bin I: user script /srv/workspace/pbuilder/1555681/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: amd64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), po-debconf, autoconf dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19967 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on po-debconf; however: Package po-debconf is not installed. pbuilder-satisfydepends-dummy depends on autoconf; however: Package autoconf is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libicu72{a} libmagic-mgc{a} libmagic1t64{a} libpipeline1{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 29 newly installed, 0 to remove and 0 not upgraded. Need to get 19.8 MB of archives. After unpacking 75.5 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main amd64 sensible-utils all 0.0.24 [24.8 kB] Get: 2 http://deb.debian.org/debian trixie/main amd64 libmagic-mgc amd64 1:5.45-3+b1 [314 kB] Get: 3 http://deb.debian.org/debian trixie/main amd64 libmagic1t64 amd64 1:5.45-3+b1 [108 kB] Get: 4 http://deb.debian.org/debian trixie/main amd64 file amd64 1:5.45-3+b1 [43.3 kB] Get: 5 http://deb.debian.org/debian trixie/main amd64 gettext-base amd64 0.22.5-2 [200 kB] Get: 6 http://deb.debian.org/debian trixie/main amd64 libuchardet0 amd64 0.0.8-1+b2 [68.9 kB] Get: 7 http://deb.debian.org/debian trixie/main amd64 groff-base amd64 1.23.0-5 [1181 kB] Get: 8 http://deb.debian.org/debian trixie/main amd64 bsdextrautils amd64 2.40.2-12 [92.0 kB] Get: 9 http://deb.debian.org/debian trixie/main amd64 libpipeline1 amd64 1.5.8-1 [42.0 kB] Get: 10 http://deb.debian.org/debian trixie/main amd64 man-db amd64 2.13.0-1 [1420 kB] Get: 11 http://deb.debian.org/debian trixie/main amd64 m4 amd64 1.4.19-4 [287 kB] Get: 12 http://deb.debian.org/debian trixie/main amd64 autoconf all 2.72-3 [493 kB] Get: 13 http://deb.debian.org/debian trixie/main amd64 autotools-dev all 20220109.1 [51.6 kB] Get: 14 http://deb.debian.org/debian trixie/main amd64 automake all 1:1.16.5-1.3 [823 kB] Get: 15 http://deb.debian.org/debian trixie/main amd64 autopoint all 0.22.5-2 [723 kB] Get: 16 http://deb.debian.org/debian trixie/main amd64 libdebhelper-perl all 13.20 [89.7 kB] Get: 17 http://deb.debian.org/debian trixie/main amd64 libtool all 2.4.7-8 [517 kB] Get: 18 http://deb.debian.org/debian trixie/main amd64 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian trixie/main amd64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian trixie/main amd64 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get: 21 http://deb.debian.org/debian trixie/main amd64 dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get: 22 http://deb.debian.org/debian trixie/main amd64 libelf1t64 amd64 0.192-4 [189 kB] Get: 23 http://deb.debian.org/debian trixie/main amd64 dwz amd64 0.15-1+b1 [110 kB] Get: 24 http://deb.debian.org/debian trixie/main amd64 libicu72 amd64 72.1-5+b1 [9423 kB] Get: 25 http://deb.debian.org/debian trixie/main amd64 libxml2 amd64 2.12.7+dfsg+really2.9.14-0.2+b1 [699 kB] Get: 26 http://deb.debian.org/debian trixie/main amd64 gettext amd64 0.22.5-2 [1601 kB] Get: 27 http://deb.debian.org/debian trixie/main amd64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian trixie/main amd64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian trixie/main amd64 debhelper all 13.20 [915 kB] Fetched 19.8 MB in 0s (71.7 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19967 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3+b1_amd64.deb ... Unpacking libmagic-mgc (1:5.45-3+b1) ... Selecting previously unselected package libmagic1t64:amd64. Preparing to unpack .../02-libmagic1t64_1%3a5.45-3+b1_amd64.deb ... Unpacking libmagic1t64:amd64 (1:5.45-3+b1) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-3+b1_amd64.deb ... Unpacking file (1:5.45-3+b1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.22.5-2_amd64.deb ... Unpacking gettext-base (0.22.5-2) ... Selecting previously unselected package libuchardet0:amd64. Preparing to unpack .../05-libuchardet0_0.0.8-1+b2_amd64.deb ... Unpacking libuchardet0:amd64 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-5_amd64.deb ... Unpacking groff-base (1.23.0-5) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.40.2-12_amd64.deb ... Unpacking bsdextrautils (2.40.2-12) ... Selecting previously unselected package libpipeline1:amd64. Preparing to unpack .../08-libpipeline1_1.5.8-1_amd64.deb ... Unpacking libpipeline1:amd64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.0-1_amd64.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-4_amd64.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.22.5-2_all.deb ... Unpacking autopoint (0.22.5-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.20_all.deb ... Unpacking libdebhelper-perl (13.20) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.4.7-8_all.deb ... Unpacking libtool (2.4.7-8) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:amd64. Preparing to unpack .../21-libelf1t64_0.192-4_amd64.deb ... Unpacking libelf1t64:amd64 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b1_amd64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libicu72:amd64. Preparing to unpack .../23-libicu72_72.1-5+b1_amd64.deb ... Unpacking libicu72:amd64 (72.1-5+b1) ... Selecting previously unselected package libxml2:amd64. Preparing to unpack .../24-libxml2_2.12.7+dfsg+really2.9.14-0.2+b1_amd64.deb ... Unpacking libxml2:amd64 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.22.5-2_amd64.deb ... Unpacking gettext (0.22.5-2) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.20_all.deb ... Unpacking debhelper (13.20) ... Setting up libpipeline1:amd64 (1.5.8-1) ... Setting up libicu72:amd64 (72.1-5+b1) ... Setting up bsdextrautils (2.40.2-12) ... Setting up libmagic-mgc (1:5.45-3+b1) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.20) ... Setting up libmagic1t64:amd64 (1:5.45-3+b1) ... Setting up gettext-base (0.22.5-2) ... Setting up m4 (1.4.19-4) ... Setting up file (1:5.45-3+b1) ... Setting up libelf1t64:amd64 (0.192-4) ... Setting up autotools-dev (20220109.1) ... Setting up autopoint (0.22.5-2) ... Setting up autoconf (2.72-3) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:amd64 (0.0.8-1+b2) ... Setting up libxml2:amd64 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up gettext (0.22.5-2) ... Setting up libtool (2.4.7-8) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up groff-base (1.23.0-5) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.20) ... Processing triggers for libc-bin (2.40-4) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.36-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/reproducible-path/bottlerocket-0.05b3/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../bottlerocket_0.05b3-20_source.changes dpkg-buildpackage: info: source package bottlerocket dpkg-buildpackage: info: source version 0.05b3-20 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Thorsten Alteholz dpkg-source --before-build . dpkg-buildpackage: info: host architecture amd64 fakeroot debian/rules clean dh_testdir dh_testroot rm -f build-stamp configure-stamp # Add here commands to clean up after the build process. [ ! -f Makefile ] || /usr/bin/make clean [ ! -f Makefile ] || /usr/bin/make really_clean find \( -name config.sub -o -name config.guess \) -print0 | xargs -0 -r rm -f \; dh_autoreconf_clean dh_clean debconf-updatepo debian/rules build dh_testdir ln -sf /usr/share/misc/config.sub config.sub ln -sf /usr/share/misc/config.guess config.guess rm -f config.cache # Add here commands to configure the package. autoupdate autoupdate: warning: autoconf input should be named 'configure.ac', not 'configure.in' dh_autoreconf autoreconf: warning: autoconf input should be named 'configure.ac', not 'configure.in' aclocal: warning: autoconf input should be named 'configure.ac', not 'configure.in' autoheader: warning: autoconf input should be named 'configure.ac', not 'configure.in' #./configure CFLAGS="\"-D_FORTIFY_SOURCE=2\"" LDFLAGS="-z now" --prefix=/usr --mandir=\${prefix}/share/man --with-x10port=/dev/firecracker CFLAGS="-D_FORTIFY_SOURCE=2" LDFLAGS="-z now" ./configure --prefix=/usr --mandir=\${prefix}/share/man --with-x10port=/dev/firecracker \ --host=x86_64-linux-gnu --build=x86_64-linux-gnu checking for x86_64-linux-gnu-gcc... x86_64-linux-gnu-gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether x86_64-linux-gnu-gcc accepts -g... yes checking for x86_64-linux-gnu-gcc option to enable C11 features... none needed checking how to run the C preprocessor... x86_64-linux-gnu-gcc -E checking for a BSD-compatible install... /usr/bin/install -c checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for features.h... yes checking for errno.h... yes checking for sys/termios.h... yes using /dev/firecracker for x10 port checking for egrep -e... /usr/bin/grep -E configure: creating ./config.status config.status: creating Makefile config.status: WARNING: 'Makefile.in' seems to ignore the --datarootdir setting config.status: creating config.h cat configure #! /bin/sh # Guess values for system-dependent variables and create Makefiles. # Generated by GNU Autoconf 2.72. # # # Copyright (C) 1992-1996, 1998-2017, 2020-2023 Free Software Foundation, # Inc. # # # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it. ## -------------------- ## ## M4sh Initialization. ## ## -------------------- ## # Be more Bourne compatible DUALCASE=1; export DUALCASE # for MKS sh if test ${ZSH_VERSION+y} && (emulate sh) >/dev/null 2>&1 then : emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case e in #( e) case `(set -o) 2>/dev/null` in #( *posix*) : set -o posix ;; #( *) : ;; esac ;; esac fi # Reset variables that may have inherited troublesome values from # the environment. # IFS needs to be set, to space, tab, and newline, in precisely that order. # (If _AS_PATH_WALK were called with IFS unset, it would have the # side effect of setting IFS to empty, thus disabling word splitting.) # Quoting is to prevent editors from complaining about space-tab. as_nl=' ' export as_nl IFS=" "" $as_nl" PS1='$ ' PS2='> ' PS4='+ ' # Ensure predictable behavior from utilities with locale-dependent output. LC_ALL=C export LC_ALL LANGUAGE=C export LANGUAGE # We cannot yet rely on "unset" to work, but we need these variables # to be unset--not just set to an empty or harmless value--now, to # avoid bugs in old shells (e.g. pre-3.0 UWIN ksh). This construct # also avoids known problems related to "unset" and subshell syntax # in other old shells (e.g. bash 2.01 and pdksh 5.2.14). for as_var in BASH_ENV ENV MAIL MAILPATH CDPATH do eval test \${$as_var+y} \ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : done # Ensure that fds 0, 1, and 2 are open. if (exec 3>&0) 2>/dev/null; then :; else exec 0&1) 2>/dev/null; then :; else exec 1>/dev/null; fi if (exec 3>&2) ; then :; else exec 2>/dev/null; fi # The user is always right. if ${PATH_SEPARATOR+false} :; then PATH_SEPARATOR=: (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || PATH_SEPARATOR=';' } fi # Find who we are. Look in the path if we contain no directory separator. as_myself= case $0 in #(( *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS case $as_dir in #((( '') as_dir=./ ;; */) ;; *) as_dir=$as_dir/ ;; esac test -r "$as_dir$0" && as_myself=$as_dir$0 && break done IFS=$as_save_IFS ;; esac # We did not find ourselves, most probably we were run as 'sh COMMAND' # in which case we are not to be found in the path. if test "x$as_myself" = x; then as_myself=$0 fi if test ! -f "$as_myself"; then printf "%s\n" "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 exit 1 fi # Use a proper internal environment variable to ensure we don't fall # into an infinite loop, continuously re-executing ourselves. if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then _as_can_reexec=no; export _as_can_reexec; # We cannot yet assume a decent shell, so we have to provide a # neutralization value for shells without unset; and this also # works around shells that cannot unset nonexistent variables. # Preserve -v and -x to the replacement shell. BASH_ENV=/dev/null ENV=/dev/null (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV case $- in # (((( *v*x* | *x*v* ) as_opts=-vx ;; *v* ) as_opts=-v ;; *x* ) as_opts=-x ;; * ) as_opts= ;; esac exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} # Admittedly, this is quite paranoid, since all the known shells bail # out after a failed 'exec'. printf "%s\n" "$0: could not re-execute with $CONFIG_SHELL" >&2 exit 255 fi # We don't want this to propagate to other subprocesses. { _as_can_reexec=; unset _as_can_reexec;} if test "x$CONFIG_SHELL" = x; then as_bourne_compatible="if test \${ZSH_VERSION+y} && (emulate sh) >/dev/null 2>&1 then : emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which # is contrary to our usage. Disable this feature. alias -g '\${1+\"\$@\"}'='\"\$@\"' setopt NO_GLOB_SUBST else case e in #( e) case \`(set -o) 2>/dev/null\` in #( *posix*) : set -o posix ;; #( *) : ;; esac ;; esac fi " as_required="as_fn_return () { (exit \$1); } as_fn_success () { as_fn_return 0; } as_fn_failure () { as_fn_return 1; } as_fn_ret_success () { return 0; } as_fn_ret_failure () { return 1; } exitcode=0 as_fn_success || { exitcode=1; echo as_fn_success failed.; } as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } if ( set x; as_fn_ret_success y && test x = \"\$1\" ) then : else case e in #( e) exitcode=1; echo positional parameters were not saved. ;; esac fi test x\$exitcode = x0 || exit 1 blah=\$(echo \$(echo blah)) test x\"\$blah\" = xblah || exit 1 test -x / || exit 1" as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 test \$(( 1 + 1 )) = 2 || exit 1" if (eval "$as_required") 2>/dev/null then : as_have_required=yes else case e in #( e) as_have_required=no ;; esac fi if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null then : else case e in #( e) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR as_found=false for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH do IFS=$as_save_IFS case $as_dir in #((( '') as_dir=./ ;; */) ;; *) as_dir=$as_dir/ ;; esac as_found=: case $as_dir in #( /*) for as_base in sh bash ksh sh5; do # Try only shells that exist, to save several forks. as_shell=$as_dir$as_base if { test -f "$as_shell" || test -f "$as_shell.exe"; } && as_run=a "$as_shell" -c "$as_bourne_compatible""$as_required" 2>/dev/null then : CONFIG_SHELL=$as_shell as_have_required=yes if as_run=a "$as_shell" -c "$as_bourne_compatible""$as_suggested" 2>/dev/null then : break 2 fi fi done;; esac as_found=false done IFS=$as_save_IFS if $as_found then : else case e in #( e) if { test -f "$SHELL" || test -f "$SHELL.exe"; } && as_run=a "$SHELL" -c "$as_bourne_compatible""$as_required" 2>/dev/null then : CONFIG_SHELL=$SHELL as_have_required=yes fi ;; esac fi if test "x$CONFIG_SHELL" != x then : export CONFIG_SHELL # We cannot yet assume a decent shell, so we have to provide a # neutralization value for shells without unset; and this also # works around shells that cannot unset nonexistent variables. # Preserve -v and -x to the replacement shell. BASH_ENV=/dev/null ENV=/dev/null (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV case $- in # (((( *v*x* | *x*v* ) as_opts=-vx ;; *v* ) as_opts=-v ;; *x* ) as_opts=-x ;; * ) as_opts= ;; esac exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} # Admittedly, this is quite paranoid, since all the known shells bail # out after a failed 'exec'. printf "%s\n" "$0: could not re-execute with $CONFIG_SHELL" >&2 exit 255 fi if test x$as_have_required = xno then : printf "%s\n" "$0: This script requires a shell more modern than all" printf "%s\n" "$0: the shells that I found on your system." if test ${ZSH_VERSION+y} ; then printf "%s\n" "$0: In particular, zsh $ZSH_VERSION has bugs and should" printf "%s\n" "$0: be upgraded to zsh 4.3.4 or later." else printf "%s\n" "$0: Please tell bug-autoconf@gnu.org about your system, $0: including any error possibly output before this $0: message. Then install a modern shell, or manually run $0: the script under such a shell if you do have one." fi exit 1 fi ;; esac fi fi SHELL=${CONFIG_SHELL-/bin/sh} export SHELL # Unset more variables known to interfere with behavior of common tools. CLICOLOR_FORCE= GREP_OPTIONS= unset CLICOLOR_FORCE GREP_OPTIONS ## --------------------- ## ## M4sh Shell Functions. ## ## --------------------- ## # as_fn_unset VAR # --------------- # Portably unset VAR. as_fn_unset () { { eval $1=; unset $1;} } as_unset=as_fn_unset # as_fn_set_status STATUS # ----------------------- # Set $? to STATUS, without forking. as_fn_set_status () { return $1 } # as_fn_set_status # as_fn_exit STATUS # ----------------- # Exit the shell with STATUS, even in a "trap 0" or "set -e" context. as_fn_exit () { set +e as_fn_set_status $1 exit $1 } # as_fn_exit # as_fn_mkdir_p # ------------- # Create "$as_dir" as a directory, including parents if necessary. as_fn_mkdir_p () { case $as_dir in #( -*) as_dir=./$as_dir;; esac test -d "$as_dir" || eval $as_mkdir_p || { as_dirs= while :; do case $as_dir in #( *\'*) as_qdir=`printf "%s\n" "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( *) as_qdir=$as_dir;; esac as_dirs="'$as_qdir' $as_dirs" as_dir=`$as_dirname -- "$as_dir" || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || printf "%s\n" X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` test -d "$as_dir" && break done test -z "$as_dirs" || eval "mkdir $as_dirs" } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" } # as_fn_mkdir_p # as_fn_executable_p FILE # ----------------------- # Test if FILE is an executable regular file. as_fn_executable_p () { test -f "$1" && test -x "$1" } # as_fn_executable_p # as_fn_append VAR VALUE # ---------------------- # Append the text in VALUE to the end of the definition contained in VAR. Take # advantage of any shell optimizations that allow amortized linear growth over # repeated appends, instead of the typical quadratic growth present in naive # implementations. if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null then : eval 'as_fn_append () { eval $1+=\$2 }' else case e in #( e) as_fn_append () { eval $1=\$$1\$2 } ;; esac fi # as_fn_append # as_fn_arith ARG... # ------------------ # Perform arithmetic evaluation on the ARGs, and store the result in the # global $as_val. Take advantage of shells that can avoid forks. The arguments # must be portable across $(()) and expr. if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null then : eval 'as_fn_arith () { as_val=$(( $* )) }' else case e in #( e) as_fn_arith () { as_val=`expr "$@" || test $? -eq 1` } ;; esac fi # as_fn_arith # as_fn_error STATUS ERROR [LINENO LOG_FD] # ---------------------------------------- # Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are # provided, also output the error to LOG_FD, referencing LINENO. Then exit the # script with STATUS, using 1 if that was 0. as_fn_error () { as_status=$1; test $as_status -eq 0 && as_status=1 if test "$4"; then as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 fi printf "%s\n" "$as_me: error: $2" >&2 as_fn_exit $as_status } # as_fn_error if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then as_basename=basename else as_basename=false fi if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then as_dirname=dirname else as_dirname=false fi as_me=`$as_basename -- "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)' \| . 2>/dev/null || printf "%s\n" X/"$0" | sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/ q } /^X\/\(\/\/\)$/{ s//\1/ q } /^X\/\(\/\).*/{ s//\1/ q } s/.*/./; q'` # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' as_cr_Letters=$as_cr_letters$as_cr_LETTERS as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits as_lineno_1=$LINENO as_lineno_1a=$LINENO as_lineno_2=$LINENO as_lineno_2a=$LINENO eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) sed -n ' p /[$]LINENO/= ' <$as_myself | sed ' t clear :clear s/[$]LINENO.*/&-/ t lineno b :lineno N :loop s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ t loop s/-\n.*// ' >$as_me.lineno && chmod +x "$as_me.lineno" || { printf "%s\n" "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } # If we had to re-execute with $CONFIG_SHELL, we're ensured to have # already done that, so ensure we don't try to do so again and fall # in an infinite loop. This has already happened in practice. _as_can_reexec=no; export _as_can_reexec # Don't try to exec as it changes $[0], causing all sort of problems # (the dirname of $[0] is not the place where we might find the # original and so on. Autoconf is especially sensitive to this). . "./$as_me.lineno" # Exit status is that of the last command. exit } # Determine whether it's possible to make 'echo' print without a newline. # These variables are no longer used directly by Autoconf, but are AC_SUBSTed # for compatibility with existing Makefiles. ECHO_C= ECHO_N= ECHO_T= case `echo -n x` in #((((( -n*) case `echo 'xy\c'` in *c*) ECHO_T=' ';; # ECHO_T is single tab character. xy) ECHO_C='\c';; *) echo `echo ksh88 bug on AIX 6.1` > /dev/null ECHO_T=' ';; esac;; *) ECHO_N='-n';; esac # For backward compatibility with old third-party macros, we provide # the shell variables $as_echo and $as_echo_n. New code should use # AS_ECHO(["message"]) and AS_ECHO_N(["message"]), respectively. as_echo='printf %s\n' as_echo_n='printf %s' rm -f conf$$ conf$$.exe conf$$.file if test -d conf$$.dir; then rm -f conf$$.dir/conf$$.file else rm -f conf$$.dir mkdir conf$$.dir 2>/dev/null fi if (echo >conf$$.file) 2>/dev/null; then if ln -s conf$$.file conf$$ 2>/dev/null; then as_ln_s='ln -s' # ... but there are two gotchas: # 1) On MSYS, both 'ln -s file dir' and 'ln file dir' fail. # 2) DJGPP < 2.04 has no symlinks; 'ln -s' creates a wrapper executable. # In both cases, we have to default to 'cp -pR'. ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || as_ln_s='cp -pR' elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else as_ln_s='cp -pR' fi else as_ln_s='cp -pR' fi rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file rmdir conf$$.dir 2>/dev/null if mkdir -p . 2>/dev/null; then as_mkdir_p='mkdir -p "$as_dir"' else test -d ./-p && rmdir ./-p as_mkdir_p=false fi as_test_x='test -x' as_executable_p=as_fn_executable_p # Sed expression to map a string onto a valid CPP name. as_sed_cpp="y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g" as_tr_cpp="eval sed '$as_sed_cpp'" # deprecated # Sed expression to map a string onto a valid variable name. as_sed_sh="y%*+%pp%;s%[^_$as_cr_alnum]%_%g" as_tr_sh="eval sed '$as_sed_sh'" # deprecated test -n "$DJDIR" || exec 7<&0 &1 # Name of the host. # hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, # so uname gets run too. ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` # # Initializations. # ac_default_prefix=/usr/local ac_clean_files= ac_config_libobj_dir=. LIBOBJS= cross_compiling=no subdirs= MFLAGS= MAKEFLAGS= # Identity of this package. PACKAGE_NAME='' PACKAGE_TARNAME='' PACKAGE_VERSION='' PACKAGE_STRING='' PACKAGE_BUGREPORT='' PACKAGE_URL='' ac_unique_file="br_cmd.h" # Factoring default headers for most tests. ac_includes_default="\ #include #ifdef HAVE_STDIO_H # include #endif #ifdef HAVE_STDLIB_H # include #endif #ifdef HAVE_STRING_H # include #endif #ifdef HAVE_INTTYPES_H # include #endif #ifdef HAVE_STDINT_H # include #endif #ifdef HAVE_STRINGS_H # include #endif #ifdef HAVE_SYS_TYPES_H # include #endif #ifdef HAVE_SYS_STAT_H # include #endif #ifdef HAVE_UNISTD_H # include #endif" ac_header_c_list= ac_subst_vars='LTLIBOBJS LIBOBJS X10PORT INSTALL_DATA INSTALL_SCRIPT INSTALL_PROGRAM CPP OBJEXT EXEEXT ac_ct_CC CPPFLAGS LDFLAGS CFLAGS CC target_alias host_alias build_alias LIBS ECHO_T ECHO_N ECHO_C DEFS mandir localedir libdir psdir pdfdir dvidir htmldir infodir docdir oldincludedir includedir runstatedir localstatedir sharedstatedir sysconfdir datadir datarootdir libexecdir sbindir bindir program_transform_name prefix exec_prefix PACKAGE_URL PACKAGE_BUGREPORT PACKAGE_STRING PACKAGE_VERSION PACKAGE_TARNAME PACKAGE_NAME PATH_SEPARATOR SHELL' ac_subst_files='' ac_user_opts=' enable_option_checking with_x10port ' ac_precious_vars='build_alias host_alias target_alias CC CFLAGS LDFLAGS LIBS CPPFLAGS CPP' # Initialize some variables set by options. ac_init_help= ac_init_version=false ac_unrecognized_opts= ac_unrecognized_sep= # The variables have the same names as the options, with # dashes changed to underlines. cache_file=/dev/null exec_prefix=NONE no_create= no_recursion= prefix=NONE program_prefix=NONE program_suffix=NONE program_transform_name=s,x,x, silent= site= srcdir= verbose= x_includes=NONE x_libraries=NONE # Installation directory options. # These are left unexpanded so users can "make install exec_prefix=/foo" # and all the variables that are supposed to be based on exec_prefix # by default will actually change. # Use braces instead of parens because sh, perl, etc. also accept them. # (The list follows the same order as the GNU Coding Standards.) bindir='${exec_prefix}/bin' sbindir='${exec_prefix}/sbin' libexecdir='${exec_prefix}/libexec' datarootdir='${prefix}/share' datadir='${datarootdir}' sysconfdir='${prefix}/etc' sharedstatedir='${prefix}/com' localstatedir='${prefix}/var' runstatedir='${localstatedir}/run' includedir='${prefix}/include' oldincludedir='/usr/include' docdir='${datarootdir}/doc/${PACKAGE}' infodir='${datarootdir}/info' htmldir='${docdir}' dvidir='${docdir}' pdfdir='${docdir}' psdir='${docdir}' libdir='${exec_prefix}/lib' localedir='${datarootdir}/locale' mandir='${datarootdir}/man' ac_prev= ac_dashdash= for ac_option do # If the previous option needs an argument, assign it. if test -n "$ac_prev"; then eval $ac_prev=\$ac_option ac_prev= continue fi case $ac_option in *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; *=) ac_optarg= ;; *) ac_optarg=yes ;; esac case $ac_dashdash$ac_option in --) ac_dashdash=yes ;; -bindir | --bindir | --bindi | --bind | --bin | --bi) ac_prev=bindir ;; -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) bindir=$ac_optarg ;; -build | --build | --buil | --bui | --bu) ac_prev=build_alias ;; -build=* | --build=* | --buil=* | --bui=* | --bu=*) build_alias=$ac_optarg ;; -cache-file | --cache-file | --cache-fil | --cache-fi \ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) ac_prev=cache_file ;; -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) cache_file=$ac_optarg ;; --config-cache | -C) cache_file=config.cache ;; -datadir | --datadir | --datadi | --datad) ac_prev=datadir ;; -datadir=* | --datadir=* | --datadi=* | --datad=*) datadir=$ac_optarg ;; -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ | --dataroo | --dataro | --datar) ac_prev=datarootdir ;; -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) datarootdir=$ac_optarg ;; -disable-* | --disable-*) ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error $? "invalid feature name: '$ac_useropt'" ac_useropt_orig=$ac_useropt ac_useropt=`printf "%s\n" "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "enable_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval enable_$ac_useropt=no ;; -docdir | --docdir | --docdi | --doc | --do) ac_prev=docdir ;; -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) docdir=$ac_optarg ;; -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) ac_prev=dvidir ;; -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) dvidir=$ac_optarg ;; -enable-* | --enable-*) ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error $? "invalid feature name: '$ac_useropt'" ac_useropt_orig=$ac_useropt ac_useropt=`printf "%s\n" "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "enable_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval enable_$ac_useropt=\$ac_optarg ;; -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ | --exec | --exe | --ex) ac_prev=exec_prefix ;; -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ | --exec=* | --exe=* | --ex=*) exec_prefix=$ac_optarg ;; -gas | --gas | --ga | --g) # Obsolete; use --with-gas. with_gas=yes ;; -help | --help | --hel | --he | -h) ac_init_help=long ;; -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) ac_init_help=recursive ;; -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) ac_init_help=short ;; -host | --host | --hos | --ho) ac_prev=host_alias ;; -host=* | --host=* | --hos=* | --ho=*) host_alias=$ac_optarg ;; -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) ac_prev=htmldir ;; -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ | --ht=*) htmldir=$ac_optarg ;; -includedir | --includedir | --includedi | --included | --include \ | --includ | --inclu | --incl | --inc) ac_prev=includedir ;; -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ | --includ=* | --inclu=* | --incl=* | --inc=*) includedir=$ac_optarg ;; -infodir | --infodir | --infodi | --infod | --info | --inf) ac_prev=infodir ;; -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) infodir=$ac_optarg ;; -libdir | --libdir | --libdi | --libd) ac_prev=libdir ;; -libdir=* | --libdir=* | --libdi=* | --libd=*) libdir=$ac_optarg ;; -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ | --libexe | --libex | --libe) ac_prev=libexecdir ;; -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ | --libexe=* | --libex=* | --libe=*) libexecdir=$ac_optarg ;; -localedir | --localedir | --localedi | --localed | --locale) ac_prev=localedir ;; -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) localedir=$ac_optarg ;; -localstatedir | --localstatedir | --localstatedi | --localstated \ | --localstate | --localstat | --localsta | --localst | --locals) ac_prev=localstatedir ;; -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) localstatedir=$ac_optarg ;; -mandir | --mandir | --mandi | --mand | --man | --ma | --m) ac_prev=mandir ;; -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) mandir=$ac_optarg ;; -nfp | --nfp | --nf) # Obsolete; use --without-fp. with_fp=no ;; -no-create | --no-create | --no-creat | --no-crea | --no-cre \ | --no-cr | --no-c | -n) no_create=yes ;; -no-recursion | --no-recursion | --no-recursio | --no-recursi \ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) no_recursion=yes ;; -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ | --oldin | --oldi | --old | --ol | --o) ac_prev=oldincludedir ;; -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) oldincludedir=$ac_optarg ;; -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) ac_prev=prefix ;; -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) prefix=$ac_optarg ;; -program-prefix | --program-prefix | --program-prefi | --program-pref \ | --program-pre | --program-pr | --program-p) ac_prev=program_prefix ;; -program-prefix=* | --program-prefix=* | --program-prefi=* \ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) program_prefix=$ac_optarg ;; -program-suffix | --program-suffix | --program-suffi | --program-suff \ | --program-suf | --program-su | --program-s) ac_prev=program_suffix ;; -program-suffix=* | --program-suffix=* | --program-suffi=* \ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) program_suffix=$ac_optarg ;; -program-transform-name | --program-transform-name \ | --program-transform-nam | --program-transform-na \ | --program-transform-n | --program-transform- \ | --program-transform | --program-transfor \ | --program-transfo | --program-transf \ | --program-trans | --program-tran \ | --progr-tra | --program-tr | --program-t) ac_prev=program_transform_name ;; -program-transform-name=* | --program-transform-name=* \ | --program-transform-nam=* | --program-transform-na=* \ | --program-transform-n=* | --program-transform-=* \ | --program-transform=* | --program-transfor=* \ | --program-transfo=* | --program-transf=* \ | --program-trans=* | --program-tran=* \ | --progr-tra=* | --program-tr=* | --program-t=*) program_transform_name=$ac_optarg ;; -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) ac_prev=pdfdir ;; -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) pdfdir=$ac_optarg ;; -psdir | --psdir | --psdi | --psd | --ps) ac_prev=psdir ;; -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) psdir=$ac_optarg ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) silent=yes ;; -runstatedir | --runstatedir | --runstatedi | --runstated \ | --runstate | --runstat | --runsta | --runst | --runs \ | --run | --ru | --r) ac_prev=runstatedir ;; -runstatedir=* | --runstatedir=* | --runstatedi=* | --runstated=* \ | --runstate=* | --runstat=* | --runsta=* | --runst=* | --runs=* \ | --run=* | --ru=* | --r=*) runstatedir=$ac_optarg ;; -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) ac_prev=sbindir ;; -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ | --sbi=* | --sb=*) sbindir=$ac_optarg ;; -sharedstatedir | --sharedstatedir | --sharedstatedi \ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ | --sharedst | --shareds | --shared | --share | --shar \ | --sha | --sh) ac_prev=sharedstatedir ;; -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ | --sha=* | --sh=*) sharedstatedir=$ac_optarg ;; -site | --site | --sit) ac_prev=site ;; -site=* | --site=* | --sit=*) site=$ac_optarg ;; -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) srcdir=$ac_optarg ;; -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ | --syscon | --sysco | --sysc | --sys | --sy) ac_prev=sysconfdir ;; -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) sysconfdir=$ac_optarg ;; -target | --target | --targe | --targ | --tar | --ta | --t) ac_prev=target_alias ;; -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) target_alias=$ac_optarg ;; -v | -verbose | --verbose | --verbos | --verbo | --verb) verbose=yes ;; -version | --version | --versio | --versi | --vers | -V) ac_init_version=: ;; -with-* | --with-*) ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error $? "invalid package name: '$ac_useropt'" ac_useropt_orig=$ac_useropt ac_useropt=`printf "%s\n" "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "with_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval with_$ac_useropt=\$ac_optarg ;; -without-* | --without-*) ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error $? "invalid package name: '$ac_useropt'" ac_useropt_orig=$ac_useropt ac_useropt=`printf "%s\n" "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "with_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval with_$ac_useropt=no ;; --x) # Obsolete; use --with-x. with_x=yes ;; -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ | --x-incl | --x-inc | --x-in | --x-i) ac_prev=x_includes ;; -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) x_includes=$ac_optarg ;; -x-libraries | --x-libraries | --x-librarie | --x-librari \ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) ac_prev=x_libraries ;; -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) x_libraries=$ac_optarg ;; -*) as_fn_error $? "unrecognized option: '$ac_option' Try '$0 --help' for more information" ;; *=*) ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` # Reject names that are not valid shell variable names. case $ac_envvar in #( '' | [0-9]* | *[!_$as_cr_alnum]* ) as_fn_error $? "invalid variable name: '$ac_envvar'" ;; esac eval $ac_envvar=\$ac_optarg export $ac_envvar ;; *) # FIXME: should be removed in autoconf 3.0. printf "%s\n" "$as_me: WARNING: you should use --build, --host, --target" >&2 expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && printf "%s\n" "$as_me: WARNING: invalid host type: $ac_option" >&2 : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}" ;; esac done if test -n "$ac_prev"; then ac_option=--`echo $ac_prev | sed 's/_/-/g'` as_fn_error $? "missing argument to $ac_option" fi if test -n "$ac_unrecognized_opts"; then case $enable_option_checking in no) ;; fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; *) printf "%s\n" "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; esac fi # Check all directory arguments for consistency. for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ datadir sysconfdir sharedstatedir localstatedir includedir \ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ libdir localedir mandir runstatedir do eval ac_val=\$$ac_var # Remove trailing slashes. case $ac_val in */ ) ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` eval $ac_var=\$ac_val;; esac # Be sure to have absolute directory names. case $ac_val in [\\/$]* | ?:[\\/]* ) continue;; NONE | '' ) case $ac_var in *prefix ) continue;; esac;; esac as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" done # There might be people who depend on the old broken behavior: '$host' # used to hold the argument of --host etc. # FIXME: To remove some day. build=$build_alias host=$host_alias target=$target_alias # FIXME: To remove some day. if test "x$host_alias" != x; then if test "x$build_alias" = x; then cross_compiling=maybe elif test "x$build_alias" != "x$host_alias"; then cross_compiling=yes fi fi ac_tool_prefix= test -n "$host_alias" && ac_tool_prefix=$host_alias- test "$silent" = yes && exec 6>/dev/null ac_pwd=`pwd` && test -n "$ac_pwd" && ac_ls_di=`ls -di .` && ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || as_fn_error $? "working directory cannot be determined" test "X$ac_ls_di" = "X$ac_pwd_ls_di" || as_fn_error $? "pwd does not report name of working directory" # Find the source files, if location was not specified. if test -z "$srcdir"; then ac_srcdir_defaulted=yes # Try the directory containing this script, then the parent directory. ac_confdir=`$as_dirname -- "$as_myself" || $as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_myself" : 'X\(//\)[^/]' \| \ X"$as_myself" : 'X\(//\)$' \| \ X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || printf "%s\n" X"$as_myself" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` srcdir=$ac_confdir if test ! -r "$srcdir/$ac_unique_file"; then srcdir=.. fi else ac_srcdir_defaulted=no fi if test ! -r "$srcdir/$ac_unique_file"; then test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" fi ac_msg="sources are in $srcdir, but 'cd $srcdir' does not work" ac_abs_confdir=`( cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" pwd)` # When building in place, set srcdir=. if test "$ac_abs_confdir" = "$ac_pwd"; then srcdir=. fi # Remove unnecessary trailing slashes from srcdir. # Double slashes in file names in object file debugging info # mess up M-x gdb in Emacs. case $srcdir in */) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; esac for ac_var in $ac_precious_vars; do eval ac_env_${ac_var}_set=\${${ac_var}+set} eval ac_env_${ac_var}_value=\$${ac_var} eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} eval ac_cv_env_${ac_var}_value=\$${ac_var} done # # Report the --help message. # if test "$ac_init_help" = "long"; then # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat <<_ACEOF 'configure' configures this package to adapt to many kinds of systems. Usage: $0 [OPTION]... [VAR=VALUE]... To assign environment variables (e.g., CC, CFLAGS...), specify them as VAR=VALUE. See below for descriptions of some of the useful variables. Defaults for the options are specified in brackets. Configuration: -h, --help display this help and exit --help=short display options specific to this package --help=recursive display the short help of all the included packages -V, --version display version information and exit -q, --quiet, --silent do not print 'checking ...' messages --cache-file=FILE cache test results in FILE [disabled] -C, --config-cache alias for '--cache-file=config.cache' -n, --no-create do not create output files --srcdir=DIR find the sources in DIR [configure dir or '..'] Installation directories: --prefix=PREFIX install architecture-independent files in PREFIX [$ac_default_prefix] --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX [PREFIX] By default, 'make install' will install all the files in '$ac_default_prefix/bin', '$ac_default_prefix/lib' etc. You can specify an installation prefix other than '$ac_default_prefix' using '--prefix', for instance '--prefix=\$HOME'. For better control, use the options below. Fine tuning of the installation directories: --bindir=DIR user executables [EPREFIX/bin] --sbindir=DIR system admin executables [EPREFIX/sbin] --libexecdir=DIR program executables [EPREFIX/libexec] --sysconfdir=DIR read-only single-machine data [PREFIX/etc] --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] --localstatedir=DIR modifiable single-machine data [PREFIX/var] --runstatedir=DIR modifiable per-process data [LOCALSTATEDIR/run] --libdir=DIR object code libraries [EPREFIX/lib] --includedir=DIR C header files [PREFIX/include] --oldincludedir=DIR C header files for non-gcc [/usr/include] --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] --datadir=DIR read-only architecture-independent data [DATAROOTDIR] --infodir=DIR info documentation [DATAROOTDIR/info] --localedir=DIR locale-dependent data [DATAROOTDIR/locale] --mandir=DIR man documentation [DATAROOTDIR/man] --docdir=DIR documentation root [DATAROOTDIR/doc/PACKAGE] --htmldir=DIR html documentation [DOCDIR] --dvidir=DIR dvi documentation [DOCDIR] --pdfdir=DIR pdf documentation [DOCDIR] --psdir=DIR ps documentation [DOCDIR] _ACEOF cat <<\_ACEOF _ACEOF fi if test -n "$ac_init_help"; then cat <<\_ACEOF Optional Packages: --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) --with-x10port=PATH Specify the serial port for the x10 module Some influential environment variables: CC C compiler command CFLAGS C compiler flags LDFLAGS linker flags, e.g. -L if you have libraries in a nonstandard directory LIBS libraries to pass to the linker, e.g. -l CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if you have headers in a nonstandard directory CPP C preprocessor Use these variables to override the choices made by 'configure' or to help it to find libraries and programs with nonstandard names/locations. Report bugs to the package provider. _ACEOF ac_status=$? fi if test "$ac_init_help" = "recursive"; then # If there are subdirs, report their specific --help. for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue test -d "$ac_dir" || { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || continue ac_builddir=. case "$ac_dir" in .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_dir_suffix=/`printf "%s\n" "$ac_dir" | sed 's|^\.[\\/]||'` # A ".." for each directory in $ac_dir_suffix. ac_top_builddir_sub=`printf "%s\n" "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` case $ac_top_builddir_sub in "") ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; esac ;; esac ac_abs_top_builddir=$ac_pwd ac_abs_builddir=$ac_pwd$ac_dir_suffix # for backward compatibility: ac_top_builddir=$ac_top_build_prefix case $srcdir in .) # We are building in place. ac_srcdir=. ac_top_srcdir=$ac_top_builddir_sub ac_abs_top_srcdir=$ac_pwd ;; [\\/]* | ?:[\\/]* ) # Absolute name. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ac_abs_top_srcdir=$srcdir ;; *) # Relative name. ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_build_prefix$srcdir ac_abs_top_srcdir=$ac_pwd/$srcdir ;; esac ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix cd "$ac_dir" || { ac_status=$?; continue; } # Check for configure.gnu first; this name is used for a wrapper for # Metaconfig's "Configure" on case-insensitive file systems. if test -f "$ac_srcdir/configure.gnu"; then echo && $SHELL "$ac_srcdir/configure.gnu" --help=recursive elif test -f "$ac_srcdir/configure"; then echo && $SHELL "$ac_srcdir/configure" --help=recursive else printf "%s\n" "$as_me: WARNING: no configuration information is in $ac_dir" >&2 fi || ac_status=$? cd "$ac_pwd" || { ac_status=$?; break; } done fi test -n "$ac_init_help" && exit $ac_status if $ac_init_version; then cat <<\_ACEOF configure generated by GNU Autoconf 2.72 Copyright (C) 2023 Free Software Foundation, Inc. This configure script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it. _ACEOF exit fi ## ------------------------ ## ## Autoconf initialization. ## ## ------------------------ ## # ac_fn_c_try_compile LINENO # -------------------------- # Try to compile conftest.$ac_ext, and return whether this succeeded. ac_fn_c_try_compile () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack rm -f conftest.$ac_objext conftest.beam if { { ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" printf "%s\n" "$ac_try_echo"; } >&5 (eval "$ac_compile") 2>conftest.err ac_status=$? if test -s conftest.err; then grep -v '^ *+' conftest.err >conftest.er1 cat conftest.er1 >&5 mv -f conftest.er1 conftest.err fi printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext then : ac_retval=0 else case e in #( e) printf "%s\n" "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=1 ;; esac fi eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno as_fn_set_status $ac_retval } # ac_fn_c_try_compile # ac_fn_c_try_cpp LINENO # ---------------------- # Try to preprocess conftest.$ac_ext, and return whether this succeeded. ac_fn_c_try_cpp () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack if { { ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" printf "%s\n" "$ac_try_echo"; } >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err ac_status=$? if test -s conftest.err; then grep -v '^ *+' conftest.err >conftest.er1 cat conftest.er1 >&5 mv -f conftest.er1 conftest.err fi printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } > conftest.i && { test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || test ! -s conftest.err } then : ac_retval=0 else case e in #( e) printf "%s\n" "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=1 ;; esac fi eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno as_fn_set_status $ac_retval } # ac_fn_c_try_cpp # ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES # ------------------------------------------------------- # Tests whether HEADER exists and can be compiled using the include files in # INCLUDES, setting the cache variable VAR accordingly. ac_fn_c_check_header_compile () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 printf %s "checking for $2... " >&6; } if eval test \${$3+y} then : printf %s "(cached) " >&6 else case e in #( e) cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $4 #include <$2> _ACEOF if ac_fn_c_try_compile "$LINENO" then : eval "$3=yes" else case e in #( e) eval "$3=no" ;; esac fi rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext ;; esac fi eval ac_res=\$$3 { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 printf "%s\n" "$ac_res" >&6; } eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno } # ac_fn_c_check_header_compile ac_configure_args_raw= for ac_arg do case $ac_arg in *\'*) ac_arg=`printf "%s\n" "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; esac as_fn_append ac_configure_args_raw " '$ac_arg'" done case $ac_configure_args_raw in *$as_nl*) ac_safe_unquote= ;; *) ac_unsafe_z='|&;<>()$`\\"*?[ '' ' # This string ends in space, tab. ac_unsafe_a="$ac_unsafe_z#~" ac_safe_unquote="s/ '\\([^$ac_unsafe_a][^$ac_unsafe_z]*\\)'/ \\1/g" ac_configure_args_raw=` printf "%s\n" "$ac_configure_args_raw" | sed "$ac_safe_unquote"`;; esac cat >config.log <<_ACEOF This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by $as_me, which was generated by GNU Autoconf 2.72. Invocation command line was $ $0$ac_configure_args_raw _ACEOF exec 5>>config.log { cat <<_ASUNAME ## --------- ## ## Platform. ## ## --------- ## hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` uname -m = `(uname -m) 2>/dev/null || echo unknown` uname -r = `(uname -r) 2>/dev/null || echo unknown` uname -s = `(uname -s) 2>/dev/null || echo unknown` uname -v = `(uname -v) 2>/dev/null || echo unknown` /usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` /bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` /bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` /usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` /bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` /bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` _ASUNAME as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS case $as_dir in #((( '') as_dir=./ ;; */) ;; *) as_dir=$as_dir/ ;; esac printf "%s\n" "PATH: $as_dir" done IFS=$as_save_IFS } >&5 cat >&5 <<_ACEOF ## ----------- ## ## Core tests. ## ## ----------- ## _ACEOF # Keep a trace of the command line. # Strip out --no-create and --no-recursion so they do not pile up. # Strip out --silent because we don't want to record it for future runs. # Also quote any args containing shell meta-characters. # Make two passes to allow for proper duplicate-argument suppression. ac_configure_args= ac_configure_args0= ac_configure_args1= ac_must_keep_next=false for ac_pass in 1 2 do for ac_arg do case $ac_arg in -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) continue ;; *\'*) ac_arg=`printf "%s\n" "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; esac case $ac_pass in 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; 2) as_fn_append ac_configure_args1 " '$ac_arg'" if test $ac_must_keep_next = true; then ac_must_keep_next=false # Got value, back to normal. else case $ac_arg in *=* | --config-cache | -C | -disable-* | --disable-* \ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ | -with-* | --with-* | -without-* | --without-* | --x) case "$ac_configure_args0 " in "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; esac ;; -* ) ac_must_keep_next=true ;; esac fi as_fn_append ac_configure_args " '$ac_arg'" ;; esac done done { ac_configure_args0=; unset ac_configure_args0;} { ac_configure_args1=; unset ac_configure_args1;} # When interrupted or exit'd, cleanup temporary files, and complete # config.log. We remove comments because anyway the quotes in there # would cause problems or look ugly. # WARNING: Use '\'' to represent an apostrophe within the trap. # WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. trap 'exit_status=$? # Sanitize IFS. IFS=" "" $as_nl" # Save into config.log some information that might help in debugging. { echo printf "%s\n" "## ---------------- ## ## Cache variables. ## ## ---------------- ##" echo # The following way of writing the cache mishandles newlines in values, ( for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do eval ac_val=\$$ac_var case $ac_val in #( *${as_nl}*) case $ac_var in #( *_cv_*) { printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 printf "%s\n" "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; esac case $ac_var in #( _ | IFS | as_nl) ;; #( BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( *) { eval $ac_var=; unset $ac_var;} ;; esac ;; esac done (set) 2>&1 | case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( *${as_nl}ac_space=\ *) sed -n \ "s/'\''/'\''\\\\'\'''\''/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" ;; #( *) sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ;; esac | sort ) echo printf "%s\n" "## ----------------- ## ## Output variables. ## ## ----------------- ##" echo for ac_var in $ac_subst_vars do eval ac_val=\$$ac_var case $ac_val in *\'\''*) ac_val=`printf "%s\n" "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; esac printf "%s\n" "$ac_var='\''$ac_val'\''" done | sort echo if test -n "$ac_subst_files"; then printf "%s\n" "## ------------------- ## ## File substitutions. ## ## ------------------- ##" echo for ac_var in $ac_subst_files do eval ac_val=\$$ac_var case $ac_val in *\'\''*) ac_val=`printf "%s\n" "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; esac printf "%s\n" "$ac_var='\''$ac_val'\''" done | sort echo fi if test -s confdefs.h; then printf "%s\n" "## ----------- ## ## confdefs.h. ## ## ----------- ##" echo cat confdefs.h echo fi test "$ac_signal" != 0 && printf "%s\n" "$as_me: caught signal $ac_signal" printf "%s\n" "$as_me: exit $exit_status" } >&5 rm -f core *.core core.conftest.* && rm -f -r conftest* confdefs* conf$$* $ac_clean_files && exit $exit_status ' 0 for ac_signal in 1 2 13 15; do trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal done ac_signal=0 # confdefs.h avoids OS command line length limits that DEFS can exceed. rm -f -r conftest* confdefs.h printf "%s\n" "/* confdefs.h */" > confdefs.h # Predefined preprocessor variables. printf "%s\n" "#define PACKAGE_NAME \"$PACKAGE_NAME\"" >>confdefs.h printf "%s\n" "#define PACKAGE_TARNAME \"$PACKAGE_TARNAME\"" >>confdefs.h printf "%s\n" "#define PACKAGE_VERSION \"$PACKAGE_VERSION\"" >>confdefs.h printf "%s\n" "#define PACKAGE_STRING \"$PACKAGE_STRING\"" >>confdefs.h printf "%s\n" "#define PACKAGE_BUGREPORT \"$PACKAGE_BUGREPORT\"" >>confdefs.h printf "%s\n" "#define PACKAGE_URL \"$PACKAGE_URL\"" >>confdefs.h # Let the site file select an alternate cache file if it wants to. # Prefer an explicitly selected file to automatically selected ones. if test -n "$CONFIG_SITE"; then ac_site_files="$CONFIG_SITE" elif test "x$prefix" != xNONE; then ac_site_files="$prefix/share/config.site $prefix/etc/config.site" else ac_site_files="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" fi for ac_site_file in $ac_site_files do case $ac_site_file in #( */*) : ;; #( *) : ac_site_file=./$ac_site_file ;; esac if test -f "$ac_site_file" && test -r "$ac_site_file"; then { printf "%s\n" "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 printf "%s\n" "$as_me: loading site script $ac_site_file" >&6;} sed 's/^/| /' "$ac_site_file" >&5 . "$ac_site_file" \ || { { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in '$ac_pwd':" >&5 printf "%s\n" "$as_me: error: in '$ac_pwd':" >&2;} as_fn_error $? "failed to load site script $ac_site_file See 'config.log' for more details" "$LINENO" 5; } fi done if test -r "$cache_file"; then # Some versions of bash will fail to source /dev/null (special files # actually), so we avoid doing that. DJGPP emulates it as a regular file. if test /dev/null != "$cache_file" && test -f "$cache_file"; then { printf "%s\n" "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 printf "%s\n" "$as_me: loading cache $cache_file" >&6;} case $cache_file in [\\/]* | ?:[\\/]* ) . "$cache_file";; *) . "./$cache_file";; esac fi else { printf "%s\n" "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 printf "%s\n" "$as_me: creating cache $cache_file" >&6;} >$cache_file fi # Test code for whether the C compiler supports C89 (global declarations) ac_c_conftest_c89_globals=' /* Does the compiler advertise C89 conformance? Do not test the value of __STDC__, because some compilers set it to 0 while being otherwise adequately conformant. */ #if !defined __STDC__ # error "Compiler does not advertise C89 conformance" #endif #include #include struct stat; /* Most of the following tests are stolen from RCS 5.7 src/conf.sh. */ struct buf { int x; }; struct buf * (*rcsopen) (struct buf *, struct stat *, int); static char *e (char **p, int i) { return p[i]; } static char *f (char * (*g) (char **, int), char **p, ...) { char *s; va_list v; va_start (v,p); s = g (p, va_arg (v,int)); va_end (v); return s; } /* C89 style stringification. */ #define noexpand_stringify(a) #a const char *stringified = noexpand_stringify(arbitrary+token=sequence); /* C89 style token pasting. Exercises some of the corner cases that e.g. old MSVC gets wrong, but not very hard. */ #define noexpand_concat(a,b) a##b #define expand_concat(a,b) noexpand_concat(a,b) extern int vA; extern int vbee; #define aye A #define bee B int *pvA = &expand_concat(v,aye); int *pvbee = &noexpand_concat(v,bee); /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has function prototypes and stuff, but not \xHH hex character constants. These do not provoke an error unfortunately, instead are silently treated as an "x". The following induces an error, until -std is added to get proper ANSI mode. Curiously \x00 != x always comes out true, for an array size at least. It is necessary to write \x00 == 0 to get something that is true only with -std. */ int osf4_cc_array ['\''\x00'\'' == 0 ? 1 : -1]; /* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters inside strings and character constants. */ #define FOO(x) '\''x'\'' int xlc6_cc_array[FOO(a) == '\''x'\'' ? 1 : -1]; int test (int i, double x); struct s1 {int (*f) (int a);}; struct s2 {int (*f) (double a);}; int pairnames (int, char **, int *(*)(struct buf *, struct stat *, int), int, int);' # Test code for whether the C compiler supports C89 (body of main). ac_c_conftest_c89_main=' ok |= (argc == 0 || f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]); ' # Test code for whether the C compiler supports C99 (global declarations) ac_c_conftest_c99_globals=' /* Does the compiler advertise C99 conformance? */ #if !defined __STDC_VERSION__ || __STDC_VERSION__ < 199901L # error "Compiler does not advertise C99 conformance" #endif // See if C++-style comments work. #include extern int puts (const char *); extern int printf (const char *, ...); extern int dprintf (int, const char *, ...); extern void *malloc (size_t); extern void free (void *); // Check varargs macros. These examples are taken from C99 6.10.3.5. // dprintf is used instead of fprintf to avoid needing to declare // FILE and stderr. #define debug(...) dprintf (2, __VA_ARGS__) #define showlist(...) puts (#__VA_ARGS__) #define report(test,...) ((test) ? puts (#test) : printf (__VA_ARGS__)) static void test_varargs_macros (void) { int x = 1234; int y = 5678; debug ("Flag"); debug ("X = %d\n", x); showlist (The first, second, and third items.); report (x>y, "x is %d but y is %d", x, y); } // Check long long types. #define BIG64 18446744073709551615ull #define BIG32 4294967295ul #define BIG_OK (BIG64 / BIG32 == 4294967297ull && BIG64 % BIG32 == 0) #if !BIG_OK #error "your preprocessor is broken" #endif #if BIG_OK #else #error "your preprocessor is broken" #endif static long long int bignum = -9223372036854775807LL; static unsigned long long int ubignum = BIG64; struct incomplete_array { int datasize; double data[]; }; struct named_init { int number; const wchar_t *name; double average; }; typedef const char *ccp; static inline int test_restrict (ccp restrict text) { // Iterate through items via the restricted pointer. // Also check for declarations in for loops. for (unsigned int i = 0; *(text+i) != '\''\0'\''; ++i) continue; return 0; } // Check varargs and va_copy. static bool test_varargs (const char *format, ...) { va_list args; va_start (args, format); va_list args_copy; va_copy (args_copy, args); const char *str = ""; int number = 0; float fnumber = 0; while (*format) { switch (*format++) { case '\''s'\'': // string str = va_arg (args_copy, const char *); break; case '\''d'\'': // int number = va_arg (args_copy, int); break; case '\''f'\'': // float fnumber = va_arg (args_copy, double); break; default: break; } } va_end (args_copy); va_end (args); return *str && number && fnumber; } ' # Test code for whether the C compiler supports C99 (body of main). ac_c_conftest_c99_main=' // Check bool. _Bool success = false; success |= (argc != 0); // Check restrict. if (test_restrict ("String literal") == 0) success = true; char *restrict newvar = "Another string"; // Check varargs. success &= test_varargs ("s, d'\'' f .", "string", 65, 34.234); test_varargs_macros (); // Check flexible array members. struct incomplete_array *ia = malloc (sizeof (struct incomplete_array) + (sizeof (double) * 10)); ia->datasize = 10; for (int i = 0; i < ia->datasize; ++i) ia->data[i] = i * 1.234; // Work around memory leak warnings. free (ia); // Check named initializers. struct named_init ni = { .number = 34, .name = L"Test wide string", .average = 543.34343, }; ni.number = 58; int dynamic_array[ni.number]; dynamic_array[0] = argv[0][0]; dynamic_array[ni.number - 1] = 543; // work around unused variable warnings ok |= (!success || bignum == 0LL || ubignum == 0uLL || newvar[0] == '\''x'\'' || dynamic_array[ni.number - 1] != 543); ' # Test code for whether the C compiler supports C11 (global declarations) ac_c_conftest_c11_globals=' /* Does the compiler advertise C11 conformance? */ #if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L # error "Compiler does not advertise C11 conformance" #endif // Check _Alignas. char _Alignas (double) aligned_as_double; char _Alignas (0) no_special_alignment; extern char aligned_as_int; char _Alignas (0) _Alignas (int) aligned_as_int; // Check _Alignof. enum { int_alignment = _Alignof (int), int_array_alignment = _Alignof (int[100]), char_alignment = _Alignof (char) }; _Static_assert (0 < -_Alignof (int), "_Alignof is signed"); // Check _Noreturn. int _Noreturn does_not_return (void) { for (;;) continue; } // Check _Static_assert. struct test_static_assert { int x; _Static_assert (sizeof (int) <= sizeof (long int), "_Static_assert does not work in struct"); long int y; }; // Check UTF-8 literals. #define u8 syntax error! char const utf8_literal[] = u8"happens to be ASCII" "another string"; // Check duplicate typedefs. typedef long *long_ptr; typedef long int *long_ptr; typedef long_ptr long_ptr; // Anonymous structures and unions -- taken from C11 6.7.2.1 Example 1. struct anonymous { union { struct { int i; int j; }; struct { int k; long int l; } w; }; int m; } v1; ' # Test code for whether the C compiler supports C11 (body of main). ac_c_conftest_c11_main=' _Static_assert ((offsetof (struct anonymous, i) == offsetof (struct anonymous, w.k)), "Anonymous union alignment botch"); v1.i = 2; v1.w.k = 5; ok |= v1.i != 5; ' # Test code for whether the C compiler supports C11 (complete). ac_c_conftest_c11_program="${ac_c_conftest_c89_globals} ${ac_c_conftest_c99_globals} ${ac_c_conftest_c11_globals} int main (int argc, char **argv) { int ok = 0; ${ac_c_conftest_c89_main} ${ac_c_conftest_c99_main} ${ac_c_conftest_c11_main} return ok; } " # Test code for whether the C compiler supports C99 (complete). ac_c_conftest_c99_program="${ac_c_conftest_c89_globals} ${ac_c_conftest_c99_globals} int main (int argc, char **argv) { int ok = 0; ${ac_c_conftest_c89_main} ${ac_c_conftest_c99_main} return ok; } " # Test code for whether the C compiler supports C89 (complete). ac_c_conftest_c89_program="${ac_c_conftest_c89_globals} int main (int argc, char **argv) { int ok = 0; ${ac_c_conftest_c89_main} return ok; } " as_fn_append ac_header_c_list " stdio.h stdio_h HAVE_STDIO_H" as_fn_append ac_header_c_list " stdlib.h stdlib_h HAVE_STDLIB_H" as_fn_append ac_header_c_list " string.h string_h HAVE_STRING_H" as_fn_append ac_header_c_list " inttypes.h inttypes_h HAVE_INTTYPES_H" as_fn_append ac_header_c_list " stdint.h stdint_h HAVE_STDINT_H" as_fn_append ac_header_c_list " strings.h strings_h HAVE_STRINGS_H" as_fn_append ac_header_c_list " sys/stat.h sys_stat_h HAVE_SYS_STAT_H" as_fn_append ac_header_c_list " sys/types.h sys_types_h HAVE_SYS_TYPES_H" as_fn_append ac_header_c_list " unistd.h unistd_h HAVE_UNISTD_H" # Auxiliary files required by this configure script. ac_aux_files="install-sh" # Locations in which to look for auxiliary files. ac_aux_dir_candidates="${srcdir}${PATH_SEPARATOR}${srcdir}/..${PATH_SEPARATOR}${srcdir}/../.." # Search for a directory containing all of the required auxiliary files, # $ac_aux_files, from the $PATH-style list $ac_aux_dir_candidates. # If we don't find one directory that contains all the files we need, # we report the set of missing files from the *first* directory in # $ac_aux_dir_candidates and give up. ac_missing_aux_files="" ac_first_candidate=: printf "%s\n" "$as_me:${as_lineno-$LINENO}: looking for aux files: $ac_aux_files" >&5 as_save_IFS=$IFS; IFS=$PATH_SEPARATOR as_found=false for as_dir in $ac_aux_dir_candidates do IFS=$as_save_IFS case $as_dir in #((( '') as_dir=./ ;; */) ;; *) as_dir=$as_dir/ ;; esac as_found=: printf "%s\n" "$as_me:${as_lineno-$LINENO}: trying $as_dir" >&5 ac_aux_dir_found=yes ac_install_sh= for ac_aux in $ac_aux_files do # As a special case, if "install-sh" is required, that requirement # can be satisfied by any of "install-sh", "install.sh", or "shtool", # and $ac_install_sh is set appropriately for whichever one is found. if test x"$ac_aux" = x"install-sh" then if test -f "${as_dir}install-sh"; then printf "%s\n" "$as_me:${as_lineno-$LINENO}: ${as_dir}install-sh found" >&5 ac_install_sh="${as_dir}install-sh -c" elif test -f "${as_dir}install.sh"; then printf "%s\n" "$as_me:${as_lineno-$LINENO}: ${as_dir}install.sh found" >&5 ac_install_sh="${as_dir}install.sh -c" elif test -f "${as_dir}shtool"; then printf "%s\n" "$as_me:${as_lineno-$LINENO}: ${as_dir}shtool found" >&5 ac_install_sh="${as_dir}shtool install -c" else ac_aux_dir_found=no if $ac_first_candidate; then ac_missing_aux_files="${ac_missing_aux_files} install-sh" else break fi fi else if test -f "${as_dir}${ac_aux}"; then printf "%s\n" "$as_me:${as_lineno-$LINENO}: ${as_dir}${ac_aux} found" >&5 else ac_aux_dir_found=no if $ac_first_candidate; then ac_missing_aux_files="${ac_missing_aux_files} ${ac_aux}" else break fi fi fi done if test "$ac_aux_dir_found" = yes; then ac_aux_dir="$as_dir" break fi ac_first_candidate=false as_found=false done IFS=$as_save_IFS if $as_found then : else case e in #( e) as_fn_error $? "cannot find required auxiliary files:$ac_missing_aux_files" "$LINENO" 5 ;; esac fi # These three variables are undocumented and unsupported, # and are intended to be withdrawn in a future Autoconf release. # They can cause serious problems if a builder's source tree is in a directory # whose full name contains unusual characters. if test -f "${ac_aux_dir}config.guess"; then ac_config_guess="$SHELL ${ac_aux_dir}config.guess" fi if test -f "${ac_aux_dir}config.sub"; then ac_config_sub="$SHELL ${ac_aux_dir}config.sub" fi if test -f "$ac_aux_dir/configure"; then ac_configure="$SHELL ${ac_aux_dir}configure" fi # Check that the precious variables saved in the cache have kept the same # value. ac_cache_corrupted=false for ac_var in $ac_precious_vars; do eval ac_old_set=\$ac_cv_env_${ac_var}_set eval ac_new_set=\$ac_env_${ac_var}_set eval ac_old_val=\$ac_cv_env_${ac_var}_value eval ac_new_val=\$ac_env_${ac_var}_value case $ac_old_set,$ac_new_set in set,) { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: '$ac_var' was set to '$ac_old_val' in the previous run" >&5 printf "%s\n" "$as_me: error: '$ac_var' was set to '$ac_old_val' in the previous run" >&2;} ac_cache_corrupted=: ;; ,set) { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: '$ac_var' was not set in the previous run" >&5 printf "%s\n" "$as_me: error: '$ac_var' was not set in the previous run" >&2;} ac_cache_corrupted=: ;; ,);; *) if test "x$ac_old_val" != "x$ac_new_val"; then # differences in whitespace do not lead to failure. ac_old_val_w=`echo x $ac_old_val` ac_new_val_w=`echo x $ac_new_val` if test "$ac_old_val_w" != "$ac_new_val_w"; then { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: '$ac_var' has changed since the previous run:" >&5 printf "%s\n" "$as_me: error: '$ac_var' has changed since the previous run:" >&2;} ac_cache_corrupted=: else { printf "%s\n" "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in '$ac_var' since the previous run:" >&5 printf "%s\n" "$as_me: warning: ignoring whitespace changes in '$ac_var' since the previous run:" >&2;} eval $ac_var=\$ac_old_val fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: former value: '$ac_old_val'" >&5 printf "%s\n" "$as_me: former value: '$ac_old_val'" >&2;} { printf "%s\n" "$as_me:${as_lineno-$LINENO}: current value: '$ac_new_val'" >&5 printf "%s\n" "$as_me: current value: '$ac_new_val'" >&2;} fi;; esac # Pass precious variables to config.status. if test "$ac_new_set" = set; then case $ac_new_val in *\'*) ac_arg=$ac_var=`printf "%s\n" "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; *) ac_arg=$ac_var=$ac_new_val ;; esac case " $ac_configure_args " in *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. *) as_fn_append ac_configure_args " '$ac_arg'" ;; esac fi done if $ac_cache_corrupted; then { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in '$ac_pwd':" >&5 printf "%s\n" "$as_me: error: in '$ac_pwd':" >&2;} { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 printf "%s\n" "$as_me: error: changes in the environment can compromise the build" >&2;} as_fn_error $? "run '${MAKE-make} distclean' and/or 'rm $cache_file' and start over" "$LINENO" 5 fi ## -------------------- ## ## Main body of script. ## ## -------------------- ## ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu ac_config_headers="$ac_config_headers config.h" ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. set dummy ${ac_tool_prefix}gcc; ac_word=$2 { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 printf %s "checking for $ac_word... " >&6; } if test ${ac_cv_prog_CC+y} then : printf %s "(cached) " >&6 else case e in #( e) if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS case $as_dir in #((( '') as_dir=./ ;; */) ;; *) as_dir=$as_dir/ ;; esac for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then ac_cv_prog_CC="${ac_tool_prefix}gcc" printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi ;; esac fi CC=$ac_cv_prog_CC if test -n "$CC"; then { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 printf "%s\n" "$CC" >&6; } else { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5 printf "%s\n" "no" >&6; } fi fi if test -z "$ac_cv_prog_CC"; then ac_ct_CC=$CC # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 printf %s "checking for $ac_word... " >&6; } if test ${ac_cv_prog_ac_ct_CC+y} then : printf %s "(cached) " >&6 else case e in #( e) if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS case $as_dir in #((( '') as_dir=./ ;; */) ;; *) as_dir=$as_dir/ ;; esac for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_CC="gcc" printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi ;; esac fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 printf "%s\n" "$ac_ct_CC" >&6; } else { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5 printf "%s\n" "no" >&6; } fi if test "x$ac_ct_CC" = x; then CC="" else case $cross_compiling:$ac_tool_warned in yes:) { printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 printf "%s\n" "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC fi else CC="$ac_cv_prog_CC" fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. set dummy ${ac_tool_prefix}cc; ac_word=$2 { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 printf %s "checking for $ac_word... " >&6; } if test ${ac_cv_prog_CC+y} then : printf %s "(cached) " >&6 else case e in #( e) if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS case $as_dir in #((( '') as_dir=./ ;; */) ;; *) as_dir=$as_dir/ ;; esac for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then ac_cv_prog_CC="${ac_tool_prefix}cc" printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi ;; esac fi CC=$ac_cv_prog_CC if test -n "$CC"; then { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 printf "%s\n" "$CC" >&6; } else { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5 printf "%s\n" "no" >&6; } fi fi fi if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 printf %s "checking for $ac_word... " >&6; } if test ${ac_cv_prog_CC+y} then : printf %s "(cached) " >&6 else case e in #( e) if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else ac_prog_rejected=no as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS case $as_dir in #((( '') as_dir=./ ;; */) ;; *) as_dir=$as_dir/ ;; esac for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then if test "$as_dir$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then ac_prog_rejected=yes continue fi ac_cv_prog_CC="cc" printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS if test $ac_prog_rejected = yes; then # We found a bogon in the path, so make sure we never use it. set dummy $ac_cv_prog_CC shift if test $# != 0; then # We chose a different compiler from the bogus one. # However, it has the same basename, so the bogon will be chosen # first if we set CC to just the basename; use the full file name. shift ac_cv_prog_CC="$as_dir$ac_word${1+' '}$@" fi fi fi ;; esac fi CC=$ac_cv_prog_CC if test -n "$CC"; then { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 printf "%s\n" "$CC" >&6; } else { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5 printf "%s\n" "no" >&6; } fi fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then for ac_prog in cl.exe do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 printf %s "checking for $ac_word... " >&6; } if test ${ac_cv_prog_CC+y} then : printf %s "(cached) " >&6 else case e in #( e) if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS case $as_dir in #((( '') as_dir=./ ;; */) ;; *) as_dir=$as_dir/ ;; esac for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then ac_cv_prog_CC="$ac_tool_prefix$ac_prog" printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi ;; esac fi CC=$ac_cv_prog_CC if test -n "$CC"; then { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 printf "%s\n" "$CC" >&6; } else { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5 printf "%s\n" "no" >&6; } fi test -n "$CC" && break done fi if test -z "$CC"; then ac_ct_CC=$CC for ac_prog in cl.exe do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 printf %s "checking for $ac_word... " >&6; } if test ${ac_cv_prog_ac_ct_CC+y} then : printf %s "(cached) " >&6 else case e in #( e) if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS case $as_dir in #((( '') as_dir=./ ;; */) ;; *) as_dir=$as_dir/ ;; esac for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_CC="$ac_prog" printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi ;; esac fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 printf "%s\n" "$ac_ct_CC" >&6; } else { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5 printf "%s\n" "no" >&6; } fi test -n "$ac_ct_CC" && break done if test "x$ac_ct_CC" = x; then CC="" else case $cross_compiling:$ac_tool_warned in yes:) { printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 printf "%s\n" "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC fi fi fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}clang", so it can be a program name with args. set dummy ${ac_tool_prefix}clang; ac_word=$2 { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 printf %s "checking for $ac_word... " >&6; } if test ${ac_cv_prog_CC+y} then : printf %s "(cached) " >&6 else case e in #( e) if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS case $as_dir in #((( '') as_dir=./ ;; */) ;; *) as_dir=$as_dir/ ;; esac for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then ac_cv_prog_CC="${ac_tool_prefix}clang" printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi ;; esac fi CC=$ac_cv_prog_CC if test -n "$CC"; then { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 printf "%s\n" "$CC" >&6; } else { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5 printf "%s\n" "no" >&6; } fi fi if test -z "$ac_cv_prog_CC"; then ac_ct_CC=$CC # Extract the first word of "clang", so it can be a program name with args. set dummy clang; ac_word=$2 { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 printf %s "checking for $ac_word... " >&6; } if test ${ac_cv_prog_ac_ct_CC+y} then : printf %s "(cached) " >&6 else case e in #( e) if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS case $as_dir in #((( '') as_dir=./ ;; */) ;; *) as_dir=$as_dir/ ;; esac for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_CC="clang" printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi ;; esac fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 printf "%s\n" "$ac_ct_CC" >&6; } else { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5 printf "%s\n" "no" >&6; } fi if test "x$ac_ct_CC" = x; then CC="" else case $cross_compiling:$ac_tool_warned in yes:) { printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 printf "%s\n" "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC fi else CC="$ac_cv_prog_CC" fi fi test -z "$CC" && { { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in '$ac_pwd':" >&5 printf "%s\n" "$as_me: error: in '$ac_pwd':" >&2;} as_fn_error $? "no acceptable C compiler found in \$PATH See 'config.log' for more details" "$LINENO" 5; } # Provide some information about the compiler. printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 set X $ac_compile ac_compiler=$2 for ac_option in --version -v -V -qversion -version; do { { ac_try="$ac_compiler $ac_option >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" printf "%s\n" "$ac_try_echo"; } >&5 (eval "$ac_compiler $ac_option >&5") 2>conftest.err ac_status=$? if test -s conftest.err; then sed '10a\ ... rest of stderr output deleted ... 10q' conftest.err >conftest.er1 cat conftest.er1 >&5 fi rm -f conftest.er1 conftest.err printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } done cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main (void) { ; return 0; } _ACEOF ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" # Try to create an executable without -o first, disregard a.out. # It will help us diagnose broken compilers, and finding out an intuition # of exeext. { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 printf %s "checking whether the C compiler works... " >&6; } ac_link_default=`printf "%s\n" "$ac_link" | sed 's/ -o *conftest[^ ]*//'` # The possible output files: ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" ac_rmfiles= for ac_file in $ac_files do case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; * ) ac_rmfiles="$ac_rmfiles $ac_file";; esac done rm -f $ac_rmfiles if { { ac_try="$ac_link_default" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" printf "%s\n" "$ac_try_echo"; } >&5 (eval "$ac_link_default") 2>&5 ac_status=$? printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } then : # Autoconf-2.13 could set the ac_cv_exeext variable to 'no'. # So ignore a value of 'no', otherwise this would lead to 'EXEEXT = no' # in a Makefile. We should not override ac_cv_exeext if it was cached, # so that the user can short-circuit this test for compilers unknown to # Autoconf. for ac_file in $ac_files '' do test -f "$ac_file" || continue case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; [ab].out ) # We found the default executable, but exeext='' is most # certainly right. break;; *.* ) if test ${ac_cv_exeext+y} && test "$ac_cv_exeext" != no; then :; else ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` fi # We set ac_cv_exeext here because the later test for it is not # safe: cross compilers may not add the suffix if given an '-o' # argument, so we may need to know it at that point already. # Even if this section looks crufty: it has the advantage of # actually working. break;; * ) break;; esac done test "$ac_cv_exeext" = no && ac_cv_exeext= else case e in #( e) ac_file='' ;; esac fi if test -z "$ac_file" then : { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5 printf "%s\n" "no" >&6; } printf "%s\n" "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 { { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in '$ac_pwd':" >&5 printf "%s\n" "$as_me: error: in '$ac_pwd':" >&2;} as_fn_error 77 "C compiler cannot create executables See 'config.log' for more details" "$LINENO" 5; } else case e in #( e) { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: yes" >&5 printf "%s\n" "yes" >&6; } ;; esac fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 printf %s "checking for C compiler default output file name... " >&6; } { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 printf "%s\n" "$ac_file" >&6; } ac_exeext=$ac_cv_exeext rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out ac_clean_files=$ac_clean_files_save { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 printf %s "checking for suffix of executables... " >&6; } if { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" printf "%s\n" "$ac_try_echo"; } >&5 (eval "$ac_link") 2>&5 ac_status=$? printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } then : # If both 'conftest.exe' and 'conftest' are 'present' (well, observable) # catch 'conftest.exe'. For instance with Cygwin, 'ls conftest' will # work properly (i.e., refer to 'conftest.exe'), while it won't with # 'rm'. for ac_file in conftest.exe conftest conftest.*; do test -f "$ac_file" || continue case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` break;; * ) break;; esac done else case e in #( e) { { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in '$ac_pwd':" >&5 printf "%s\n" "$as_me: error: in '$ac_pwd':" >&2;} as_fn_error $? "cannot compute suffix of executables: cannot compile and link See 'config.log' for more details" "$LINENO" 5; } ;; esac fi rm -f conftest conftest$ac_cv_exeext { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 printf "%s\n" "$ac_cv_exeext" >&6; } rm -f conftest.$ac_ext EXEEXT=$ac_cv_exeext ac_exeext=$EXEEXT cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include int main (void) { FILE *f = fopen ("conftest.out", "w"); if (!f) return 1; return ferror (f) || fclose (f) != 0; ; return 0; } _ACEOF ac_clean_files="$ac_clean_files conftest.out" # Check that the compiler produces executables we can run. If not, either # the compiler is broken, or we cross compile. { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 printf %s "checking whether we are cross compiling... " >&6; } if test "$cross_compiling" != yes; then { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" printf "%s\n" "$ac_try_echo"; } >&5 (eval "$ac_link") 2>&5 ac_status=$? printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } if { ac_try='./conftest$ac_cv_exeext' { { case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" printf "%s\n" "$ac_try_echo"; } >&5 (eval "$ac_try") 2>&5 ac_status=$? printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; }; then cross_compiling=no else if test "$cross_compiling" = maybe; then cross_compiling=yes else { { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in '$ac_pwd':" >&5 printf "%s\n" "$as_me: error: in '$ac_pwd':" >&2;} as_fn_error 77 "cannot run C compiled programs. If you meant to cross compile, use '--host'. See 'config.log' for more details" "$LINENO" 5; } fi fi fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 printf "%s\n" "$cross_compiling" >&6; } rm -f conftest.$ac_ext conftest$ac_cv_exeext \ conftest.o conftest.obj conftest.out ac_clean_files=$ac_clean_files_save { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 printf %s "checking for suffix of object files... " >&6; } if test ${ac_cv_objext+y} then : printf %s "(cached) " >&6 else case e in #( e) cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main (void) { ; return 0; } _ACEOF rm -f conftest.o conftest.obj if { { ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" printf "%s\n" "$ac_try_echo"; } >&5 (eval "$ac_compile") 2>&5 ac_status=$? printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } then : for ac_file in conftest.o conftest.obj conftest.*; do test -f "$ac_file" || continue; case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` break;; esac done else case e in #( e) printf "%s\n" "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 { { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in '$ac_pwd':" >&5 printf "%s\n" "$as_me: error: in '$ac_pwd':" >&2;} as_fn_error $? "cannot compute suffix of object files: cannot compile See 'config.log' for more details" "$LINENO" 5; } ;; esac fi rm -f conftest.$ac_cv_objext conftest.$ac_ext ;; esac fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 printf "%s\n" "$ac_cv_objext" >&6; } OBJEXT=$ac_cv_objext ac_objext=$OBJEXT { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking whether the compiler supports GNU C" >&5 printf %s "checking whether the compiler supports GNU C... " >&6; } if test ${ac_cv_c_compiler_gnu+y} then : printf %s "(cached) " >&6 else case e in #( e) cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main (void) { #ifndef __GNUC__ choke me #endif ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO" then : ac_compiler_gnu=yes else case e in #( e) ac_compiler_gnu=no ;; esac fi rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext ac_cv_c_compiler_gnu=$ac_compiler_gnu ;; esac fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 printf "%s\n" "$ac_cv_c_compiler_gnu" >&6; } ac_compiler_gnu=$ac_cv_c_compiler_gnu if test $ac_compiler_gnu = yes; then GCC=yes else GCC= fi ac_test_CFLAGS=${CFLAGS+y} ac_save_CFLAGS=$CFLAGS { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 printf %s "checking whether $CC accepts -g... " >&6; } if test ${ac_cv_prog_cc_g+y} then : printf %s "(cached) " >&6 else case e in #( e) ac_save_c_werror_flag=$ac_c_werror_flag ac_c_werror_flag=yes ac_cv_prog_cc_g=no CFLAGS="-g" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main (void) { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO" then : ac_cv_prog_cc_g=yes else case e in #( e) CFLAGS="" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main (void) { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO" then : else case e in #( e) ac_c_werror_flag=$ac_save_c_werror_flag CFLAGS="-g" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main (void) { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO" then : ac_cv_prog_cc_g=yes fi rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext ;; esac fi rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext ;; esac fi rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext ac_c_werror_flag=$ac_save_c_werror_flag ;; esac fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 printf "%s\n" "$ac_cv_prog_cc_g" >&6; } if test $ac_test_CFLAGS; then CFLAGS=$ac_save_CFLAGS elif test $ac_cv_prog_cc_g = yes; then if test "$GCC" = yes; then CFLAGS="-g -O2" else CFLAGS="-g" fi else if test "$GCC" = yes; then CFLAGS="-O2" else CFLAGS= fi fi ac_prog_cc_stdc=no if test x$ac_prog_cc_stdc = xno then : { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $CC option to enable C11 features" >&5 printf %s "checking for $CC option to enable C11 features... " >&6; } if test ${ac_cv_prog_cc_c11+y} then : printf %s "(cached) " >&6 else case e in #( e) ac_cv_prog_cc_c11=no ac_save_CC=$CC cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $ac_c_conftest_c11_program _ACEOF for ac_arg in '' -std=gnu11 do CC="$ac_save_CC $ac_arg" if ac_fn_c_try_compile "$LINENO" then : ac_cv_prog_cc_c11=$ac_arg fi rm -f core conftest.err conftest.$ac_objext conftest.beam test "x$ac_cv_prog_cc_c11" != "xno" && break done rm -f conftest.$ac_ext CC=$ac_save_CC ;; esac fi if test "x$ac_cv_prog_cc_c11" = xno then : { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 printf "%s\n" "unsupported" >&6; } else case e in #( e) if test "x$ac_cv_prog_cc_c11" = x then : { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 printf "%s\n" "none needed" >&6; } else case e in #( e) { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c11" >&5 printf "%s\n" "$ac_cv_prog_cc_c11" >&6; } CC="$CC $ac_cv_prog_cc_c11" ;; esac fi ac_cv_prog_cc_stdc=$ac_cv_prog_cc_c11 ac_prog_cc_stdc=c11 ;; esac fi fi if test x$ac_prog_cc_stdc = xno then : { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $CC option to enable C99 features" >&5 printf %s "checking for $CC option to enable C99 features... " >&6; } if test ${ac_cv_prog_cc_c99+y} then : printf %s "(cached) " >&6 else case e in #( e) ac_cv_prog_cc_c99=no ac_save_CC=$CC cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $ac_c_conftest_c99_program _ACEOF for ac_arg in '' -std=gnu99 -std=c99 -c99 -qlanglvl=extc1x -qlanglvl=extc99 -AC99 -D_STDC_C99= do CC="$ac_save_CC $ac_arg" if ac_fn_c_try_compile "$LINENO" then : ac_cv_prog_cc_c99=$ac_arg fi rm -f core conftest.err conftest.$ac_objext conftest.beam test "x$ac_cv_prog_cc_c99" != "xno" && break done rm -f conftest.$ac_ext CC=$ac_save_CC ;; esac fi if test "x$ac_cv_prog_cc_c99" = xno then : { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 printf "%s\n" "unsupported" >&6; } else case e in #( e) if test "x$ac_cv_prog_cc_c99" = x then : { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 printf "%s\n" "none needed" >&6; } else case e in #( e) { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c99" >&5 printf "%s\n" "$ac_cv_prog_cc_c99" >&6; } CC="$CC $ac_cv_prog_cc_c99" ;; esac fi ac_cv_prog_cc_stdc=$ac_cv_prog_cc_c99 ac_prog_cc_stdc=c99 ;; esac fi fi if test x$ac_prog_cc_stdc = xno then : { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $CC option to enable C89 features" >&5 printf %s "checking for $CC option to enable C89 features... " >&6; } if test ${ac_cv_prog_cc_c89+y} then : printf %s "(cached) " >&6 else case e in #( e) ac_cv_prog_cc_c89=no ac_save_CC=$CC cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $ac_c_conftest_c89_program _ACEOF for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" do CC="$ac_save_CC $ac_arg" if ac_fn_c_try_compile "$LINENO" then : ac_cv_prog_cc_c89=$ac_arg fi rm -f core conftest.err conftest.$ac_objext conftest.beam test "x$ac_cv_prog_cc_c89" != "xno" && break done rm -f conftest.$ac_ext CC=$ac_save_CC ;; esac fi if test "x$ac_cv_prog_cc_c89" = xno then : { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 printf "%s\n" "unsupported" >&6; } else case e in #( e) if test "x$ac_cv_prog_cc_c89" = x then : { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 printf "%s\n" "none needed" >&6; } else case e in #( e) { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 printf "%s\n" "$ac_cv_prog_cc_c89" >&6; } CC="$CC $ac_cv_prog_cc_c89" ;; esac fi ac_cv_prog_cc_stdc=$ac_cv_prog_cc_c89 ac_prog_cc_stdc=c89 ;; esac fi fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5 printf %s "checking how to run the C preprocessor... " >&6; } # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= fi if test -z "$CPP"; then if test ${ac_cv_prog_CPP+y} then : printf %s "(cached) " >&6 else case e in #( e) # Double quotes because $CC needs to be expanded for CPP in "$CC -E" "$CC -E -traditional-cpp" cpp /lib/cpp do ac_preproc_ok=false for ac_c_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include Syntax error _ACEOF if ac_fn_c_try_cpp "$LINENO" then : else case e in #( e) # Broken: fails on valid input. continue ;; esac fi rm -f conftest.err conftest.i conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if ac_fn_c_try_cpp "$LINENO" then : # Broken: success on invalid input. continue else case e in #( e) # Passes both tests. ac_preproc_ok=: break ;; esac fi rm -f conftest.err conftest.i conftest.$ac_ext done # Because of 'break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.i conftest.err conftest.$ac_ext if $ac_preproc_ok then : break fi done ac_cv_prog_CPP=$CPP ;; esac fi CPP=$ac_cv_prog_CPP else ac_cv_prog_CPP=$CPP fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5 printf "%s\n" "$CPP" >&6; } ac_preproc_ok=false for ac_c_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include Syntax error _ACEOF if ac_fn_c_try_cpp "$LINENO" then : else case e in #( e) # Broken: fails on valid input. continue ;; esac fi rm -f conftest.err conftest.i conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if ac_fn_c_try_cpp "$LINENO" then : # Broken: success on invalid input. continue else case e in #( e) # Passes both tests. ac_preproc_ok=: break ;; esac fi rm -f conftest.err conftest.i conftest.$ac_ext done # Because of 'break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.i conftest.err conftest.$ac_ext if $ac_preproc_ok then : else case e in #( e) { { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in '$ac_pwd':" >&5 printf "%s\n" "$as_me: error: in '$ac_pwd':" >&2;} as_fn_error $? "C preprocessor \"$CPP\" fails sanity check See 'config.log' for more details" "$LINENO" 5; } ;; esac fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu # Find a good install program. We prefer a C program (faster), # so one script is as good as another. But avoid the broken or # incompatible versions: # SysV /etc/install, /usr/sbin/install # SunOS /usr/etc/install # IRIX /sbin/install # AIX /bin/install # AmigaOS /C/install, which installs bootblocks on floppy discs # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag # AFS /usr/afsws/bin/install, which mishandles nonexistent args # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # OS/2's system install, which has a completely different semantic # ./install, which can be erroneously created by make from ./install.sh. # Reject install programs that cannot install multiple files. { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 printf %s "checking for a BSD-compatible install... " >&6; } if test -z "$INSTALL"; then if test ${ac_cv_path_install+y} then : printf %s "(cached) " >&6 else case e in #( e) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS case $as_dir in #((( '') as_dir=./ ;; */) ;; *) as_dir=$as_dir/ ;; esac # Account for fact that we put trailing slashes in our PATH walk. case $as_dir in #(( ./ | /[cC]/* | \ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \ /usr/ucb/* ) ;; *) # OSF1 and SCO ODT 3.0 have their own names for install. # Don't use installbsd from OSF since it installs stuff as root # by default. for ac_prog in ginstall scoinst install; do for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir$ac_prog$ac_exec_ext"; then if test $ac_prog = install && grep dspmsg "$as_dir$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # AIX install. It has an incompatible calling convention. : elif test $ac_prog = install && grep pwplus "$as_dir$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # program-specific install script used by HP pwplus--don't use. : else rm -rf conftest.one conftest.two conftest.dir echo one > conftest.one echo two > conftest.two mkdir conftest.dir if "$as_dir$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir/" && test -s conftest.one && test -s conftest.two && test -s conftest.dir/conftest.one && test -s conftest.dir/conftest.two then ac_cv_path_install="$as_dir$ac_prog$ac_exec_ext -c" break 3 fi fi fi done done ;; esac done IFS=$as_save_IFS rm -rf conftest.one conftest.two conftest.dir ;; esac fi if test ${ac_cv_path_install+y}; then INSTALL=$ac_cv_path_install else # As a last resort, use the slow shell script. Don't cache a # value for INSTALL within a source directory, because that will # break other packages using the cache if that directory is # removed, or if the value is a relative name. INSTALL=$ac_install_sh fi fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5 printf "%s\n" "$INSTALL" >&6; } # Use test -z because SunOS4 sh mishandles braces in ${var-val}. # It thinks the first close brace ends the variable substitution. test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' ac_header= ac_cache= for ac_item in $ac_header_c_list do if test $ac_cache; then ac_fn_c_check_header_compile "$LINENO" $ac_header ac_cv_header_$ac_cache "$ac_includes_default" if eval test \"x\$ac_cv_header_$ac_cache\" = xyes; then printf "%s\n" "#define $ac_item 1" >> confdefs.h fi ac_header= ac_cache= elif test $ac_header; then ac_cache=$ac_item else ac_header=$ac_item fi done if test $ac_cv_header_stdlib_h = yes && test $ac_cv_header_string_h = yes then : printf "%s\n" "#define STDC_HEADERS 1" >>confdefs.h fi ac_fn_c_check_header_compile "$LINENO" "features.h" "ac_cv_header_features_h" "$ac_includes_default" if test "x$ac_cv_header_features_h" = xyes then : printf "%s\n" "#define HAVE_FEATURES_H 1" >>confdefs.h fi ac_fn_c_check_header_compile "$LINENO" "errno.h" "ac_cv_header_errno_h" "$ac_includes_default" if test "x$ac_cv_header_errno_h" = xyes then : printf "%s\n" "#define HAVE_ERRNO_H 1" >>confdefs.h fi ac_fn_c_check_header_compile "$LINENO" "sys/termios.h" "ac_cv_header_sys_termios_h" "$ac_includes_default" if test "x$ac_cv_header_sys_termios_h" = xyes then : printf "%s\n" "#define HAVE_SYS_TERMIOS_H 1" >>confdefs.h fi # Check whether --with-x10port was given. if test ${with_x10port+y} then : withval=$with_x10port; case "$withval" in *) X10PORT="$withval" ;; esac else case e in #( e) X10PORT="auto" ;; esac fi if test "$X10PORT" = "auto" then echo "guessing x10 port" for port in /dev/ttyS0 /dev/cua0 /dev/cuaa0 /dev/tty00 /dev/ttya do if test -c $port then X10PORT=$port; break fi done fi echo "using $X10PORT for x10 port" { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for egrep -e" >&5 printf %s "checking for egrep -e... " >&6; } if test ${ac_cv_path_EGREP_TRADITIONAL+y} then : printf %s "(cached) " >&6 else case e in #( e) if test -z "$EGREP_TRADITIONAL"; then ac_path_EGREP_TRADITIONAL_found=false # Loop through the user's path and test for each of PROGNAME-LIST as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin do IFS=$as_save_IFS case $as_dir in #((( '') as_dir=./ ;; */) ;; *) as_dir=$as_dir/ ;; esac for ac_prog in grep ggrep do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_EGREP_TRADITIONAL="$as_dir$ac_prog$ac_exec_ext" as_fn_executable_p "$ac_path_EGREP_TRADITIONAL" || continue # Check for GNU ac_path_EGREP_TRADITIONAL and select it if it is found. # Check for GNU $ac_path_EGREP_TRADITIONAL case `"$ac_path_EGREP_TRADITIONAL" --version 2>&1` in #( *GNU*) ac_cv_path_EGREP_TRADITIONAL="$ac_path_EGREP_TRADITIONAL" ac_path_EGREP_TRADITIONAL_found=:;; #( *) ac_count=0 printf %s 0123456789 >"conftest.in" while : do cat "conftest.in" "conftest.in" >"conftest.tmp" mv "conftest.tmp" "conftest.in" cp "conftest.in" "conftest.nl" printf "%s\n" 'EGREP_TRADITIONAL' >> "conftest.nl" "$ac_path_EGREP_TRADITIONAL" -E 'EGR(EP|AC)_TRADITIONAL$' < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break as_fn_arith $ac_count + 1 && ac_count=$as_val if test $ac_count -gt ${ac_path_EGREP_TRADITIONAL_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_EGREP_TRADITIONAL="$ac_path_EGREP_TRADITIONAL" ac_path_EGREP_TRADITIONAL_max=$ac_count fi # 10*(2^10) chars as input seems more than enough test $ac_count -gt 10 && break done rm -f conftest.in conftest.tmp conftest.nl conftest.out;; esac $ac_path_EGREP_TRADITIONAL_found && break 3 done done done IFS=$as_save_IFS if test -z "$ac_cv_path_EGREP_TRADITIONAL"; then : fi else ac_cv_path_EGREP_TRADITIONAL=$EGREP_TRADITIONAL fi if test "$ac_cv_path_EGREP_TRADITIONAL" then : ac_cv_path_EGREP_TRADITIONAL="$ac_cv_path_EGREP_TRADITIONAL -E" else case e in #( e) if test -z "$EGREP_TRADITIONAL"; then ac_path_EGREP_TRADITIONAL_found=false # Loop through the user's path and test for each of PROGNAME-LIST as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin do IFS=$as_save_IFS case $as_dir in #((( '') as_dir=./ ;; */) ;; *) as_dir=$as_dir/ ;; esac for ac_prog in egrep do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_EGREP_TRADITIONAL="$as_dir$ac_prog$ac_exec_ext" as_fn_executable_p "$ac_path_EGREP_TRADITIONAL" || continue # Check for GNU ac_path_EGREP_TRADITIONAL and select it if it is found. # Check for GNU $ac_path_EGREP_TRADITIONAL case `"$ac_path_EGREP_TRADITIONAL" --version 2>&1` in #( *GNU*) ac_cv_path_EGREP_TRADITIONAL="$ac_path_EGREP_TRADITIONAL" ac_path_EGREP_TRADITIONAL_found=:;; #( *) ac_count=0 printf %s 0123456789 >"conftest.in" while : do cat "conftest.in" "conftest.in" >"conftest.tmp" mv "conftest.tmp" "conftest.in" cp "conftest.in" "conftest.nl" printf "%s\n" 'EGREP_TRADITIONAL' >> "conftest.nl" "$ac_path_EGREP_TRADITIONAL" 'EGR(EP|AC)_TRADITIONAL$' < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break as_fn_arith $ac_count + 1 && ac_count=$as_val if test $ac_count -gt ${ac_path_EGREP_TRADITIONAL_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_EGREP_TRADITIONAL="$ac_path_EGREP_TRADITIONAL" ac_path_EGREP_TRADITIONAL_max=$ac_count fi # 10*(2^10) chars as input seems more than enough test $ac_count -gt 10 && break done rm -f conftest.in conftest.tmp conftest.nl conftest.out;; esac $ac_path_EGREP_TRADITIONAL_found && break 3 done done done IFS=$as_save_IFS if test -z "$ac_cv_path_EGREP_TRADITIONAL"; then as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 fi else ac_cv_path_EGREP_TRADITIONAL=$EGREP_TRADITIONAL fi ;; esac fi ;; esac fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP_TRADITIONAL" >&5 printf "%s\n" "$ac_cv_path_EGREP_TRADITIONAL" >&6; } EGREP_TRADITIONAL=$ac_cv_path_EGREP_TRADITIONAL cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP_TRADITIONAL "getopt_long" >/dev/null 2>&1 then : printf "%s\n" "#define HAVE_GETOPT_LONG 1" >>confdefs.h fi rm -rf conftest* cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP_TRADITIONAL "issetugid" >/dev/null 2>&1 then : printf "%s\n" "#define HAVE_ISSETUGID 1" >>confdefs.h fi rm -rf conftest* ac_config_files="$ac_config_files Makefile" cat >confcache <<\_ACEOF # This file is a shell script that caches the results of configure # tests run on this system so they can be shared between configure # scripts and configure runs, see configure's option --config-cache. # It is not useful on other systems. If it contains results you don't # want to keep, you may remove or edit it. # # config.status only pays attention to the cache file if you give it # the --recheck option to rerun configure. # # 'ac_cv_env_foo' variables (set or unset) will be overridden when # loading this file, other *unset* 'ac_cv_foo' will be assigned the # following values. _ACEOF # The following way of writing the cache mishandles newlines in values, # but we know of no workaround that is simple, portable, and efficient. # So, we kill variables containing newlines. # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. ( for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do eval ac_val=\$$ac_var case $ac_val in #( *${as_nl}*) case $ac_var in #( *_cv_*) { printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 printf "%s\n" "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; esac case $ac_var in #( _ | IFS | as_nl) ;; #( BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( *) { eval $ac_var=; unset $ac_var;} ;; esac ;; esac done (set) 2>&1 | case $as_nl`(ac_space=' '; set) 2>&1` in #( *${as_nl}ac_space=\ *) # 'set' does not quote correctly, so add quotes: double-quote # substitution turns \\\\ into \\, and sed turns \\ into \. sed -n \ "s/'/'\\\\''/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" ;; #( *) # 'set' quotes correctly as required by POSIX, so do not add quotes. sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ;; esac | sort ) | sed ' /^ac_cv_env_/b end t clear :clear s/^\([^=]*\)=\(.*[{}].*\)$/test ${\1+y} || &/ t end s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ :end' >>confcache if diff "$cache_file" confcache >/dev/null 2>&1; then :; else if test -w "$cache_file"; then if test "x$cache_file" != "x/dev/null"; then { printf "%s\n" "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 printf "%s\n" "$as_me: updating cache $cache_file" >&6;} if test ! -f "$cache_file" || test -h "$cache_file"; then cat confcache >"$cache_file" else case $cache_file in #( */* | ?:*) mv -f confcache "$cache_file"$$ && mv -f "$cache_file"$$ "$cache_file" ;; #( *) mv -f confcache "$cache_file" ;; esac fi fi else { printf "%s\n" "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 printf "%s\n" "$as_me: not updating unwritable cache $cache_file" >&6;} fi fi rm -f confcache test "x$prefix" = xNONE && prefix=$ac_default_prefix # Let make expand exec_prefix. test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' DEFS=-DHAVE_CONFIG_H ac_libobjs= ac_ltlibobjs= U= for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue # 1. Remove the extension, and $U if already installed. ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' ac_i=`printf "%s\n" "$ac_i" | sed "$ac_script"` # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR # will be set to the directory where LIBOBJS objects are built. as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' done LIBOBJS=$ac_libobjs LTLIBOBJS=$ac_ltlibobjs : "${CONFIG_STATUS=./config.status}" ac_write_fail=0 ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files $CONFIG_STATUS" { printf "%s\n" "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 printf "%s\n" "$as_me: creating $CONFIG_STATUS" >&6;} as_write_fail=0 cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 #! $SHELL # Generated by $as_me. # Run this file to recreate the current configuration. # Compiler output produced by configure, useful for debugging # configure, is in config.log if it exists. debug=false ac_cs_recheck=false ac_cs_silent=false SHELL=\${CONFIG_SHELL-$SHELL} export SHELL _ASEOF cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 ## -------------------- ## ## M4sh Initialization. ## ## -------------------- ## # Be more Bourne compatible DUALCASE=1; export DUALCASE # for MKS sh if test ${ZSH_VERSION+y} && (emulate sh) >/dev/null 2>&1 then : emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case e in #( e) case `(set -o) 2>/dev/null` in #( *posix*) : set -o posix ;; #( *) : ;; esac ;; esac fi # Reset variables that may have inherited troublesome values from # the environment. # IFS needs to be set, to space, tab, and newline, in precisely that order. # (If _AS_PATH_WALK were called with IFS unset, it would have the # side effect of setting IFS to empty, thus disabling word splitting.) # Quoting is to prevent editors from complaining about space-tab. as_nl=' ' export as_nl IFS=" "" $as_nl" PS1='$ ' PS2='> ' PS4='+ ' # Ensure predictable behavior from utilities with locale-dependent output. LC_ALL=C export LC_ALL LANGUAGE=C export LANGUAGE # We cannot yet rely on "unset" to work, but we need these variables # to be unset--not just set to an empty or harmless value--now, to # avoid bugs in old shells (e.g. pre-3.0 UWIN ksh). This construct # also avoids known problems related to "unset" and subshell syntax # in other old shells (e.g. bash 2.01 and pdksh 5.2.14). for as_var in BASH_ENV ENV MAIL MAILPATH CDPATH do eval test \${$as_var+y} \ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : done # Ensure that fds 0, 1, and 2 are open. if (exec 3>&0) 2>/dev/null; then :; else exec 0&1) 2>/dev/null; then :; else exec 1>/dev/null; fi if (exec 3>&2) ; then :; else exec 2>/dev/null; fi # The user is always right. if ${PATH_SEPARATOR+false} :; then PATH_SEPARATOR=: (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || PATH_SEPARATOR=';' } fi # Find who we are. Look in the path if we contain no directory separator. as_myself= case $0 in #(( *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS case $as_dir in #((( '') as_dir=./ ;; */) ;; *) as_dir=$as_dir/ ;; esac test -r "$as_dir$0" && as_myself=$as_dir$0 && break done IFS=$as_save_IFS ;; esac # We did not find ourselves, most probably we were run as 'sh COMMAND' # in which case we are not to be found in the path. if test "x$as_myself" = x; then as_myself=$0 fi if test ! -f "$as_myself"; then printf "%s\n" "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 exit 1 fi # as_fn_error STATUS ERROR [LINENO LOG_FD] # ---------------------------------------- # Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are # provided, also output the error to LOG_FD, referencing LINENO. Then exit the # script with STATUS, using 1 if that was 0. as_fn_error () { as_status=$1; test $as_status -eq 0 && as_status=1 if test "$4"; then as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 fi printf "%s\n" "$as_me: error: $2" >&2 as_fn_exit $as_status } # as_fn_error # as_fn_set_status STATUS # ----------------------- # Set $? to STATUS, without forking. as_fn_set_status () { return $1 } # as_fn_set_status # as_fn_exit STATUS # ----------------- # Exit the shell with STATUS, even in a "trap 0" or "set -e" context. as_fn_exit () { set +e as_fn_set_status $1 exit $1 } # as_fn_exit # as_fn_unset VAR # --------------- # Portably unset VAR. as_fn_unset () { { eval $1=; unset $1;} } as_unset=as_fn_unset # as_fn_append VAR VALUE # ---------------------- # Append the text in VALUE to the end of the definition contained in VAR. Take # advantage of any shell optimizations that allow amortized linear growth over # repeated appends, instead of the typical quadratic growth present in naive # implementations. if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null then : eval 'as_fn_append () { eval $1+=\$2 }' else case e in #( e) as_fn_append () { eval $1=\$$1\$2 } ;; esac fi # as_fn_append # as_fn_arith ARG... # ------------------ # Perform arithmetic evaluation on the ARGs, and store the result in the # global $as_val. Take advantage of shells that can avoid forks. The arguments # must be portable across $(()) and expr. if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null then : eval 'as_fn_arith () { as_val=$(( $* )) }' else case e in #( e) as_fn_arith () { as_val=`expr "$@" || test $? -eq 1` } ;; esac fi # as_fn_arith if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then as_basename=basename else as_basename=false fi if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then as_dirname=dirname else as_dirname=false fi as_me=`$as_basename -- "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)' \| . 2>/dev/null || printf "%s\n" X/"$0" | sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/ q } /^X\/\(\/\/\)$/{ s//\1/ q } /^X\/\(\/\).*/{ s//\1/ q } s/.*/./; q'` # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' as_cr_Letters=$as_cr_letters$as_cr_LETTERS as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits # Determine whether it's possible to make 'echo' print without a newline. # These variables are no longer used directly by Autoconf, but are AC_SUBSTed # for compatibility with existing Makefiles. ECHO_C= ECHO_N= ECHO_T= case `echo -n x` in #((((( -n*) case `echo 'xy\c'` in *c*) ECHO_T=' ';; # ECHO_T is single tab character. xy) ECHO_C='\c';; *) echo `echo ksh88 bug on AIX 6.1` > /dev/null ECHO_T=' ';; esac;; *) ECHO_N='-n';; esac # For backward compatibility with old third-party macros, we provide # the shell variables $as_echo and $as_echo_n. New code should use # AS_ECHO(["message"]) and AS_ECHO_N(["message"]), respectively. as_echo='printf %s\n' as_echo_n='printf %s' rm -f conf$$ conf$$.exe conf$$.file if test -d conf$$.dir; then rm -f conf$$.dir/conf$$.file else rm -f conf$$.dir mkdir conf$$.dir 2>/dev/null fi if (echo >conf$$.file) 2>/dev/null; then if ln -s conf$$.file conf$$ 2>/dev/null; then as_ln_s='ln -s' # ... but there are two gotchas: # 1) On MSYS, both 'ln -s file dir' and 'ln file dir' fail. # 2) DJGPP < 2.04 has no symlinks; 'ln -s' creates a wrapper executable. # In both cases, we have to default to 'cp -pR'. ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || as_ln_s='cp -pR' elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else as_ln_s='cp -pR' fi else as_ln_s='cp -pR' fi rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file rmdir conf$$.dir 2>/dev/null # as_fn_mkdir_p # ------------- # Create "$as_dir" as a directory, including parents if necessary. as_fn_mkdir_p () { case $as_dir in #( -*) as_dir=./$as_dir;; esac test -d "$as_dir" || eval $as_mkdir_p || { as_dirs= while :; do case $as_dir in #( *\'*) as_qdir=`printf "%s\n" "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( *) as_qdir=$as_dir;; esac as_dirs="'$as_qdir' $as_dirs" as_dir=`$as_dirname -- "$as_dir" || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || printf "%s\n" X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` test -d "$as_dir" && break done test -z "$as_dirs" || eval "mkdir $as_dirs" } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" } # as_fn_mkdir_p if mkdir -p . 2>/dev/null; then as_mkdir_p='mkdir -p "$as_dir"' else test -d ./-p && rmdir ./-p as_mkdir_p=false fi # as_fn_executable_p FILE # ----------------------- # Test if FILE is an executable regular file. as_fn_executable_p () { test -f "$1" && test -x "$1" } # as_fn_executable_p as_test_x='test -x' as_executable_p=as_fn_executable_p # Sed expression to map a string onto a valid CPP name. as_sed_cpp="y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g" as_tr_cpp="eval sed '$as_sed_cpp'" # deprecated # Sed expression to map a string onto a valid variable name. as_sed_sh="y%*+%pp%;s%[^_$as_cr_alnum]%_%g" as_tr_sh="eval sed '$as_sed_sh'" # deprecated exec 6>&1 ## ----------------------------------- ## ## Main body of $CONFIG_STATUS script. ## ## ----------------------------------- ## _ASEOF test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # Save the log message, to keep $0 and so on meaningful, and to # report actual input values of CONFIG_FILES etc. instead of their # values after options handling. ac_log=" This file was extended by $as_me, which was generated by GNU Autoconf 2.72. Invocation command line was CONFIG_FILES = $CONFIG_FILES CONFIG_HEADERS = $CONFIG_HEADERS CONFIG_LINKS = $CONFIG_LINKS CONFIG_COMMANDS = $CONFIG_COMMANDS $ $0 $@ on `(hostname || uname -n) 2>/dev/null | sed 1q` " _ACEOF case $ac_config_files in *" "*) set x $ac_config_files; shift; ac_config_files=$*;; esac case $ac_config_headers in *" "*) set x $ac_config_headers; shift; ac_config_headers=$*;; esac cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 # Files that config.status was made for. config_files="$ac_config_files" config_headers="$ac_config_headers" _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ac_cs_usage="\ '$as_me' instantiates files and other configuration actions from templates according to the current configuration. Unless the files and actions are specified as TAGs, all are instantiated by default. Usage: $0 [OPTION]... [TAG]... -h, --help print this help, then exit -V, --version print version number and configuration settings, then exit --config print configuration, then exit -q, --quiet, --silent do not print progress messages -d, --debug don't remove temporary files --recheck update $as_me by reconfiguring in the same conditions --file=FILE[:TEMPLATE] instantiate the configuration file FILE --header=FILE[:TEMPLATE] instantiate the configuration header FILE Configuration files: $config_files Configuration headers: $config_headers Report bugs to the package provider." _ACEOF ac_cs_config=`printf "%s\n" "$ac_configure_args" | sed "$ac_safe_unquote"` ac_cs_config_escaped=`printf "%s\n" "$ac_cs_config" | sed "s/^ //; s/'/'\\\\\\\\''/g"` cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_cs_config='$ac_cs_config_escaped' ac_cs_version="\\ config.status configured by $0, generated by GNU Autoconf 2.72, with options \\"\$ac_cs_config\\" Copyright (C) 2023 Free Software Foundation, Inc. This config.status script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it." ac_pwd='$ac_pwd' srcdir='$srcdir' INSTALL='$INSTALL' test -n "\$AWK" || AWK=awk _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # The default lists apply if the user does not specify any file. ac_need_defaults=: while test $# != 0 do case $1 in --*=?*) ac_option=`expr "X$1" : 'X\([^=]*\)='` ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` ac_shift=: ;; --*=) ac_option=`expr "X$1" : 'X\([^=]*\)='` ac_optarg= ac_shift=: ;; *) ac_option=$1 ac_optarg=$2 ac_shift=shift ;; esac case $ac_option in # Handling of the options. -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) ac_cs_recheck=: ;; --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) printf "%s\n" "$ac_cs_version"; exit ;; --config | --confi | --conf | --con | --co | --c ) printf "%s\n" "$ac_cs_config"; exit ;; --debug | --debu | --deb | --de | --d | -d ) debug=: ;; --file | --fil | --fi | --f ) $ac_shift case $ac_optarg in *\'*) ac_optarg=`printf "%s\n" "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; '') as_fn_error $? "missing file argument" ;; esac as_fn_append CONFIG_FILES " '$ac_optarg'" ac_need_defaults=false;; --header | --heade | --head | --hea ) $ac_shift case $ac_optarg in *\'*) ac_optarg=`printf "%s\n" "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; esac as_fn_append CONFIG_HEADERS " '$ac_optarg'" ac_need_defaults=false;; --he | --h) # Conflict between --help and --header as_fn_error $? "ambiguous option: '$1' Try '$0 --help' for more information.";; --help | --hel | -h ) printf "%s\n" "$ac_cs_usage"; exit ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil | --si | --s) ac_cs_silent=: ;; # This is an error. -*) as_fn_error $? "unrecognized option: '$1' Try '$0 --help' for more information." ;; *) as_fn_append ac_config_targets " $1" ac_need_defaults=false ;; esac shift done ac_configure_extra_args= if $ac_cs_silent; then exec 6>/dev/null ac_configure_extra_args="$ac_configure_extra_args --silent" fi _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 if \$ac_cs_recheck; then set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion shift \printf "%s\n" "running CONFIG_SHELL=$SHELL \$*" >&6 CONFIG_SHELL='$SHELL' export CONFIG_SHELL exec "\$@" fi _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 exec 5>>config.log { echo sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX ## Running $as_me. ## _ASBOX printf "%s\n" "$ac_log" } >&5 _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # Handling of arguments. for ac_config_target in $ac_config_targets do case $ac_config_target in "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; *) as_fn_error $? "invalid argument: '$ac_config_target'" "$LINENO" 5;; esac done # If the user did not use the arguments to specify the items to instantiate, # then the envvar interface is used. Set only those that are not. # We use the long form for the default assignment because of an extremely # bizarre bug on SunOS 4.1.3. if $ac_need_defaults; then test ${CONFIG_FILES+y} || CONFIG_FILES=$config_files test ${CONFIG_HEADERS+y} || CONFIG_HEADERS=$config_headers fi # Have a temporary directory for convenience. Make it in the build tree # simply because there is no reason against having it here, and in addition, # creating and moving files from /tmp can sometimes cause problems. # Hook for its removal unless debugging. # Note that there is a small window in which the directory will not be cleaned: # after its creation but before its name has been assigned to '$tmp'. $debug || { tmp= ac_tmp= trap 'exit_status=$? : "${ac_tmp:=$tmp}" { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status ' 0 trap 'as_fn_exit 1' 1 2 13 15 } # Create a (secure) tmp directory for tmp files. { tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && test -d "$tmp" } || { tmp=./conf$$-$RANDOM (umask 077 && mkdir "$tmp") } || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 ac_tmp=$tmp # Set up the scripts for CONFIG_FILES section. # No need to generate them if there are no CONFIG_FILES. # This happens for instance with './config.status config.h'. if test -n "$CONFIG_FILES"; then ac_cr=`echo X | tr X '\015'` # On cygwin, bash can eat \r inside `` if the user requested igncr. # But we know of no other shell where ac_cr would be empty at this # point, so we can use a bashism as a fallback. if test "x$ac_cr" = x; then eval ac_cr=\$\'\\r\' fi ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then ac_cs_awk_cr='\\r' else ac_cs_awk_cr=$ac_cr fi echo 'BEGIN {' >"$ac_tmp/subs1.awk" && _ACEOF { echo "cat >conf$$subs.awk <<_ACEOF" && echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && echo "_ACEOF" } >conf$$subs.sh || as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` ac_delim='%!_!# ' for ac_last_try in false false false false false :; do . ./conf$$subs.sh || as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` if test $ac_delim_n = $ac_delim_num; then break elif $ac_last_try; then as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 else ac_delim="$ac_delim!$ac_delim _$ac_delim!! " fi done rm -f conf$$subs.sh cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK && _ACEOF sed -n ' h s/^/S["/; s/!.*/"]=/ p g s/^[^!]*!// :repl t repl s/'"$ac_delim"'$// t delim :nl h s/\(.\{148\}\)..*/\1/ t more1 s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ p n b repl :more1 s/["\\]/\\&/g; s/^/"/; s/$/"\\/ p g s/.\{148\}// t nl :delim h s/\(.\{148\}\)..*/\1/ t more2 s/["\\]/\\&/g; s/^/"/; s/$/"/ p b :more2 s/["\\]/\\&/g; s/^/"/; s/$/"\\/ p g s/.\{148\}// t delim ' >$CONFIG_STATUS || ac_write_fail=1 rm -f conf$$subs.awk cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 _ACAWK cat >>"\$ac_tmp/subs1.awk" <<_ACAWK && for (key in S) S_is_set[key] = 1 FS = "" } { line = $ 0 nfields = split(line, field, "@") substed = 0 len = length(field[1]) for (i = 2; i < nfields; i++) { key = field[i] keylen = length(key) if (S_is_set[key]) { value = S[key] line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) len += length(value) + length(field[++i]) substed = 1 } else len += 1 + keylen } print line } _ACAWK _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" else cat fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 _ACEOF # VPATH may cause trouble with some makes, so we remove sole $(srcdir), # ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and # trailing colons and then remove the whole line if VPATH becomes empty # (actually we leave an empty line to preserve line numbers). if test "x$srcdir" = x.; then ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ h s/// s/^/:/ s/[ ]*$/:/ s/:\$(srcdir):/:/g s/:\${srcdir}:/:/g s/:@srcdir@:/:/g s/^:*// s/:*$// x s/\(=[ ]*\).*/\1/ G s/\n// s/^[^=]*=[ ]*$// }' fi cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 fi # test -n "$CONFIG_FILES" # Set up the scripts for CONFIG_HEADERS section. # No need to generate them if there are no CONFIG_HEADERS. # This happens for instance with './config.status Makefile'. if test -n "$CONFIG_HEADERS"; then cat >"$ac_tmp/defines.awk" <<\_ACAWK || BEGIN { _ACEOF # Transform confdefs.h into an awk script 'defines.awk', embedded as # here-document in config.status, that substitutes the proper values into # config.h.in to produce config.h. # Create a delimiter string that does not exist in confdefs.h, to ease # handling of long lines. ac_delim='%!_!# ' for ac_last_try in false false :; do ac_tt=`sed -n "/$ac_delim/p" confdefs.h` if test -z "$ac_tt"; then break elif $ac_last_try; then as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5 else ac_delim="$ac_delim!$ac_delim _$ac_delim!! " fi done # For the awk script, D is an array of macro values keyed by name, # likewise P contains macro parameters if any. Preserve backslash # newline sequences. ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* sed -n ' s/.\{148\}/&'"$ac_delim"'/g t rset :rset s/^[ ]*#[ ]*define[ ][ ]*/ / t def d :def s/\\$// t bsnl s/["\\]/\\&/g s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ D["\1"]=" \3"/p s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p d :bsnl s/["\\]/\\&/g s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ D["\1"]=" \3\\\\\\n"\\/p t cont s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p t cont d :cont n s/.\{148\}/&'"$ac_delim"'/g t clear :clear s/\\$// t bsnlc s/["\\]/\\&/g; s/^/"/; s/$/"/p d :bsnlc s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p b cont ' >$CONFIG_STATUS || ac_write_fail=1 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 for (key in D) D_is_set[key] = 1 FS = "" } /^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { line = \$ 0 split(line, arg, " ") if (arg[1] == "#") { defundef = arg[2] mac1 = arg[3] } else { defundef = substr(arg[1], 2) mac1 = arg[2] } split(mac1, mac2, "(") #) macro = mac2[1] prefix = substr(line, 1, index(line, defundef) - 1) if (D_is_set[macro]) { # Preserve the white space surrounding the "#". print prefix "define", macro P[macro] D[macro] next } else { # Replace #undef with comments. This is necessary, for example, # in the case of _POSIX_SOURCE, which is predefined and required # on some systems where configure will not decide to define it. if (defundef == "undef") { print "/*", prefix defundef, macro, "*/" next } } } { print } _ACAWK _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 as_fn_error $? "could not setup config headers machinery" "$LINENO" 5 fi # test -n "$CONFIG_HEADERS" eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS " shift for ac_tag do case $ac_tag in :[FHLC]) ac_mode=$ac_tag; continue;; esac case $ac_mode$ac_tag in :[FHL]*:*);; :L* | :C*:*) as_fn_error $? "invalid tag '$ac_tag'" "$LINENO" 5;; :[FH]-) ac_tag=-:-;; :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; esac ac_save_IFS=$IFS IFS=: set x $ac_tag IFS=$ac_save_IFS shift ac_file=$1 shift case $ac_mode in :L) ac_source=$1;; :[FH]) ac_file_inputs= for ac_f do case $ac_f in -) ac_f="$ac_tmp/stdin";; *) # Look for the file first in the build tree, then in the source tree # (if the path is not absolute). The absolute path cannot be DOS-style, # because $ac_f cannot contain ':'. test -f "$ac_f" || case $ac_f in [\\/$]*) false;; *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; esac || as_fn_error 1 "cannot find input file: '$ac_f'" "$LINENO" 5;; esac case $ac_f in *\'*) ac_f=`printf "%s\n" "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac as_fn_append ac_file_inputs " '$ac_f'" done # Let's still pretend it is 'configure' which instantiates (i.e., don't # use $as_me), people would be surprised to read: # /* config.h. Generated by config.status. */ configure_input='Generated from '` printf "%s\n" "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' `' by configure.' if test x"$ac_file" != x-; then configure_input="$ac_file. $configure_input" { printf "%s\n" "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 printf "%s\n" "$as_me: creating $ac_file" >&6;} fi # Neutralize special characters interpreted by sed in replacement strings. case $configure_input in #( *\&* | *\|* | *\\* ) ac_sed_conf_input=`printf "%s\n" "$configure_input" | sed 's/[\\\\&|]/\\\\&/g'`;; #( *) ac_sed_conf_input=$configure_input;; esac case $ac_tag in *:-:* | *:-) cat >"$ac_tmp/stdin" \ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; esac ;; esac ac_dir=`$as_dirname -- "$ac_file" || $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$ac_file" : 'X\(//\)[^/]' \| \ X"$ac_file" : 'X\(//\)$' \| \ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || printf "%s\n" X"$ac_file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` as_dir="$ac_dir"; as_fn_mkdir_p ac_builddir=. case "$ac_dir" in .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_dir_suffix=/`printf "%s\n" "$ac_dir" | sed 's|^\.[\\/]||'` # A ".." for each directory in $ac_dir_suffix. ac_top_builddir_sub=`printf "%s\n" "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` case $ac_top_builddir_sub in "") ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; esac ;; esac ac_abs_top_builddir=$ac_pwd ac_abs_builddir=$ac_pwd$ac_dir_suffix # for backward compatibility: ac_top_builddir=$ac_top_build_prefix case $srcdir in .) # We are building in place. ac_srcdir=. ac_top_srcdir=$ac_top_builddir_sub ac_abs_top_srcdir=$ac_pwd ;; [\\/]* | ?:[\\/]* ) # Absolute name. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ac_abs_top_srcdir=$srcdir ;; *) # Relative name. ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_build_prefix$srcdir ac_abs_top_srcdir=$ac_pwd/$srcdir ;; esac ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix case $ac_mode in :F) # # CONFIG_FILE # case $INSTALL in [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; esac _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # If the template does not know about datarootdir, expand it. # FIXME: This hack should be removed a few years after 2.60. ac_datarootdir_hack=; ac_datarootdir_seen= ac_sed_dataroot=' /datarootdir/ { p q } /@datadir@/p /@docdir@/p /@infodir@/p /@localedir@/p /@mandir@/p' case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in *datarootdir*) ac_datarootdir_seen=yes;; *@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) { printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 printf "%s\n" "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_datarootdir_hack=' s&@datadir@&$datadir&g s&@docdir@&$docdir&g s&@infodir@&$infodir&g s&@localedir@&$localedir&g s&@mandir@&$mandir&g s&\\\${datarootdir}&$datarootdir&g' ;; esac _ACEOF # Neutralize VPATH when '$srcdir' = '.'. # Shell code in configure.ac might set extrasub. # FIXME: do we really want to maintain this feature? cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_sed_extra="$ac_vpsub $extrasub _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 :t /@[a-zA-Z_][a-zA-Z_0-9]*@/!b s|@configure_input@|$ac_sed_conf_input|;t t s&@top_builddir@&$ac_top_builddir_sub&;t t s&@top_build_prefix@&$ac_top_build_prefix&;t t s&@srcdir@&$ac_srcdir&;t t s&@abs_srcdir@&$ac_abs_srcdir&;t t s&@top_srcdir@&$ac_top_srcdir&;t t s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t s&@builddir@&$ac_builddir&;t t s&@abs_builddir@&$ac_abs_builddir&;t t s&@abs_top_builddir@&$ac_abs_top_builddir&;t t s&@INSTALL@&$ac_INSTALL&;t t $ac_datarootdir_hack " eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ "$ac_tmp/out"`; test -z "$ac_out"; } && { printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable 'datarootdir' which seems to be undefined. Please make sure it is defined" >&5 printf "%s\n" "$as_me: WARNING: $ac_file contains a reference to the variable 'datarootdir' which seems to be undefined. Please make sure it is defined" >&2;} rm -f "$ac_tmp/stdin" case $ac_file in -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; esac \ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; :H) # # CONFIG_HEADER # if test x"$ac_file" != x-; then { printf "%s\n" "/* $configure_input */" >&1 \ && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" } >"$ac_tmp/config.h" \ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then { printf "%s\n" "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5 printf "%s\n" "$as_me: $ac_file is unchanged" >&6;} else rm -f "$ac_file" mv "$ac_tmp/config.h" "$ac_file" \ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 fi else printf "%s\n" "/* $configure_input */" >&1 \ && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \ || as_fn_error $? "could not create -" "$LINENO" 5 fi ;; esac done # for ac_tag as_fn_exit 0 _ACEOF ac_clean_files=$ac_clean_files_save test $ac_write_fail = 0 || as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 # configure is writing to config.log, and then calls config.status. # config.status does its own redirection, appending to config.log. # Unfortunately, on DOS this fails, as config.log is still kept open # by configure, so config.status won't be able to write to it; its # output is simply discarded. So we exec the FD to /dev/null, # effectively closing config.log, so it can be properly (re)opened and # appended to by config.status. When coming back to configure, we # need to make the FD available again. if test "$no_create" != yes; then ac_cs_success=: ac_config_status_args= test "$silent" = yes && ac_config_status_args="$ac_config_status_args --quiet" exec 5>/dev/null $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false exec 5>>config.log # Use ||, not &&, to avoid exiting from the if with $? = 1, which # would make configure fail if this is the last instruction. $ac_cs_success || as_fn_exit 1 fi if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then { printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 printf "%s\n" "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} fi dh_testdir # Add here commands to compile the package. CFLAGS="-D_FORTIFY_SOURCE=2" LDFLAGS="-z now" /usr/bin/make make[1]: Entering directory '/build/reproducible-path/bottlerocket-0.05b3' x86_64-linux-gnu-gcc -D_FORTIFY_SOURCE=2 -I. -Wall -O2 -DX10_PORTNAME=\"/dev/firecracker\" -DHAVE_CONFIG_H -c ./br.c x86_64-linux-gnu-gcc -D_FORTIFY_SOURCE=2 -I. -Wall -O2 -DX10_PORTNAME=\"/dev/firecracker\" -DHAVE_CONFIG_H -c ./br_cmd.c x86_64-linux-gnu-gcc -D_FORTIFY_SOURCE=2 -I. -Wall -O2 -DX10_PORTNAME=\"/dev/firecracker\" -DHAVE_CONFIG_H -c ./br_cmd_engine.c ar cru libbr.a br_cmd.o br_cmd_engine.o ar: `u' modifier ignored since `D' is the default (see `U') x86_64-linux-gnu-gcc -D_FORTIFY_SOURCE=2 -I. -Wall -O2 -DX10_PORTNAME=\"/dev/firecracker\" -DHAVE_CONFIG_H -o br br.o -L. -lbr make[1]: Leaving directory '/build/reproducible-path/bottlerocket-0.05b3' touch build-stamp fakeroot debian/rules binary dh_testdir dh_testroot dh_prep dh_installdirs # Add here commands to install the package into debian/bottlerocket. /usr/bin/make install prefix=/build/reproducible-path/bottlerocket-0.05b3/debian/bottlerocket/usr make[1]: Entering directory '/build/reproducible-path/bottlerocket-0.05b3' /usr/bin/install -c -d -m 755 /build/reproducible-path/bottlerocket-0.05b3/debian/bottlerocket/usr/bin /usr/bin/install -c -m 555 br /build/reproducible-path/bottlerocket-0.05b3/debian/bottlerocket/usr/bin make[1]: Leaving directory '/build/reproducible-path/bottlerocket-0.05b3' dh_testdir dh_testroot dh_installchangelogs dh_installdocs README dh_install rocket_launcher usr/bin dh_installmenu dh_installdebconf dh_installman dh_installudev dh_link dh_strip dh_compress dh_fixperms dh_installdeb dh_shlibdeps dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'bottlerocket-dbgsym' in '../bottlerocket-dbgsym_0.05b3-20_amd64.deb'. dpkg-deb: building package 'bottlerocket' in '../bottlerocket_0.05b3-20_amd64.deb'. dpkg-genbuildinfo --build=binary -O../bottlerocket_0.05b3-20_amd64.buildinfo dpkg-genchanges --build=binary -O../bottlerocket_0.05b3-20_amd64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/1555681 and its subdirectories I: Current time: Sat Jan 10 15:01:10 -12 2026 I: pbuilder-time-stamp: 1768100470 Sun Dec 8 20:38:13 UTC 2024 I: 1st build successful. Starting 2nd build on remote node ionos1-amd64.debian.net. Sun Dec 8 20:38:13 UTC 2024 I: Preparing to do remote build '2' on ionos1-amd64.debian.net. Sun Dec 8 20:39:08 UTC 2024 I: Deleting $TMPDIR on ionos1-amd64.debian.net. Sun Dec 8 20:39:09 UTC 2024 I: bottlerocket_0.05b3-20_amd64.changes: Format: 1.8 Date: Sun, 28 Jul 2024 20:07:41 +0200 Source: bottlerocket Binary: bottlerocket bottlerocket-dbgsym Architecture: amd64 Version: 0.05b3-20 Distribution: unstable Urgency: medium Maintainer: Thorsten Alteholz Changed-By: Thorsten Alteholz Description: bottlerocket - Utility to control X10 Firecracker devices for home automation Closes: 1077333 Changes: bottlerocket (0.05b3-20) unstable; urgency=medium . * debian/control: change Rules-Requires-Root: to binary-targets (Closes: #1077333) Thanks a lot to Adrian to tell me about this before I take notice! Checksums-Sha1: a30287bc8797f10723e7cb32ded90f6c8866a69a 3248 bottlerocket-dbgsym_0.05b3-20_amd64.deb cf4e148cd9378e90395b4ed55f4403ca3c842b07 5079 bottlerocket_0.05b3-20_amd64.buildinfo 7115b5429c751ca4524610d4d14b39277cf94d75 21492 bottlerocket_0.05b3-20_amd64.deb Checksums-Sha256: 751dd1b5d8a52d90d5d2bac27b2f23108adac923130272f8ce4351e8a9ede062 3248 bottlerocket-dbgsym_0.05b3-20_amd64.deb 99da1edda62319670b40d1df71693cd62699fb7f18414d76ad2b9b3c60e81e13 5079 bottlerocket_0.05b3-20_amd64.buildinfo 2d09b44a50027733279912640fa067d9cf9f268058fbf9e00228b68df8805b4a 21492 bottlerocket_0.05b3-20_amd64.deb Files: 7a33c0da14908f6b43ec1c4b0d626944 3248 debug optional bottlerocket-dbgsym_0.05b3-20_amd64.deb 80aabc23823c9de78353dc5ed3f9308a 5079 electronics optional bottlerocket_0.05b3-20_amd64.buildinfo c0cbc0f2a2fcf646283a6b03600969c5 21492 electronics optional bottlerocket_0.05b3-20_amd64.deb Sun Dec 8 20:39:10 UTC 2024 I: diffoscope 284 will be used to compare the two builds: Running as unit: rb-diffoscope-amd64_10-24508.service # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.IdkbAUh0/bottlerocket_0.05b3-20.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.IdkbAUh0/bottlerocket_0.05b3-20.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.IdkbAUh0/bottlerocket_0.05b3-20.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.IdkbAUh0/b1/bottlerocket_0.05b3-20_amd64.changes /srv/reproducible-results/rbuild-debian/r-b-build.IdkbAUh0/b2/bottlerocket_0.05b3-20_amd64.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.392s) 0.392s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.017s) 0.017s 12 calls diffoscope.comparators.binary.FilesystemFile ## specialize (total time: 0.000s) 0.000s 1 call specialize Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 765ms CPU time consumed: 765ms Sun Dec 8 20:39:11 UTC 2024 I: diffoscope 284 found no differences in the changes files, and a .buildinfo file also exists. Sun Dec 8 20:39:11 UTC 2024 I: bottlerocket from trixie built successfully and reproducibly on amd64. Sun Dec 8 20:39:12 UTC 2024 I: Submitting .buildinfo files to external archives: Sun Dec 8 20:39:12 UTC 2024 I: Submitting 8.0K b1/bottlerocket_0.05b3-20_amd64.buildinfo.asc Sun Dec 8 20:39:13 UTC 2024 I: Submitting 8.0K b2/bottlerocket_0.05b3-20_amd64.buildinfo.asc Sun Dec 8 20:39:14 UTC 2024 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Sun Dec 8 20:39:14 UTC 2024 I: Done submitting .buildinfo files. Sun Dec 8 20:39:14 UTC 2024 I: Removing signed bottlerocket_0.05b3-20_amd64.buildinfo.asc files: removed './b1/bottlerocket_0.05b3-20_amd64.buildinfo.asc' removed './b2/bottlerocket_0.05b3-20_amd64.buildinfo.asc'