Fri May 29 12:56:58 UTC 2020 I: starting to build nullmailer/buster/i386 on jenkins on '2020-05-29 12:56' Fri May 29 12:56:58 UTC 2020 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/i386_12/6593/console.log Fri May 29 12:56:58 UTC 2020 I: Downloading source for buster/nullmailer=1:2.2-3 --2020-05-29 12:56:59-- http://deb.debian.org/debian/pool/main/n/nullmailer/nullmailer_2.2-3.dsc Connecting to 78.137.99.97:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 1785 (1.7K) Saving to: ‘nullmailer_2.2-3.dsc’ 0K . 100% 146M=0s 2020-05-29 12:56:59 (146 MB/s) - ‘nullmailer_2.2-3.dsc’ saved [1785/1785] Fri May 29 12:56:59 UTC 2020 I: nullmailer_2.2-3.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Format: 3.0 (quilt) Source: nullmailer Binary: nullmailer Architecture: any Version: 1:2.2-3 Maintainer: David Bremner Uploaders: Felix Lechner Homepage: http://untroubled.org/nullmailer/ Standards-Version: 4.1.2 Build-Depends: daemontools, debhelper (>= 10.8), libgnutls28-dev | libgnutls-dev, po-debconf, ucspi-tcp-ipv6 Package-List: nullmailer deb mail optional arch=any Checksums-Sha1: 3af06b14d5b6f19b6d6cb737cfb262179f2071c5 90462 nullmailer_2.2.orig.tar.gz 4382fd35e760e5b5a38e62418e468791f1f7d778 27952 nullmailer_2.2-3.debian.tar.xz Checksums-Sha256: 6d277f69f1999c86df0ca9a97a4f14f9bb431c50fd4e016918290b84ff679241 90462 nullmailer_2.2.orig.tar.gz 9a7cdabd29578c699f0b65bb3c9dc50fc68a72d6381c614daa88d4affdd5667b 27952 nullmailer_2.2-3.debian.tar.xz Files: bf957e8527e73b9deb7a7ab56039c767 90462 nullmailer_2.2.orig.tar.gz dcce7eb101a46f6008be2215e1d9a741 27952 nullmailer_2.2-3.debian.tar.xz Dgit: 58712a56364320e9e804cbd673982f7ad66db17a debian archive/debian/1%2.2-3 https://git.dgit.debian.org/nullmailer -----BEGIN PGP SIGNATURE----- iQGzBAEBCAAdFiEE3VS2dnyDRXKVCQCp8gKXHaSnniwFAlwhbeQACgkQ8gKXHaSn nizeOQwAhbym9MJCeKKRA7TDc7UHg3Jg2u5VQ1HaC+taMK1E9nq+2YBuuRLjuHox 4PjxQMwhPAil3hmQ7prpv/a27rGv6tUMcCwg7XtwA96GVKd61nckiQ9i/u6jbRHB MXqp8iTJfoyN/ML4GBRehR2Z2OZpL92k1X0nLvCiulli4x7tmXpqhUo1IejNi0xu +8KT29Gg1rpU0Mh8TBXgZNvv4i9bADyRtTyJwiTnWM2jowlYhVkbyMohZ4U3ojii SQ7WpQ9bODsaxtKr/6y090kEEQMGl4PcIrbS4ELivnGNbDVQgwBTEoD7wERvEZ2g 2W5hAfDCZF7cStrL4KNz6jo7VmVwzKaTG8G3C3wXMzFyhDB9kQ3k2ipo9wVrfk81 3IHfKJS/N7SDemL+hbRru0LpiNsshtAlydfRVDTDtnxs8idElsWz6/HpcQw9rU0u rsN1NOYGSjWvbBbgj/j2t56QMdHnltGTKzKjZ7plJi1a5abrW6Un1HulNb/yYQnh 1tjsvtgW =Zdgr -----END PGP SIGNATURE----- Fri May 29 12:56:59 UTC 2020 I: Checking whether the package is not for us Fri May 29 12:56:59 UTC 2020 I: Starting 1st build on remote node profitbricks-build16-i386.debian.net. Fri May 29 12:56:59 UTC 2020 I: Preparing to do remote build '1' on profitbricks-build16-i386.debian.net. Fri May 29 13:01:22 UTC 2020 I: Deleting $TMPDIR on profitbricks-build16-i386.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Thu Jul 1 07:20:00 -12 2021 I: pbuilder-time-stamp: 1625167200 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/buster-reproducible-base.tgz] I: copying local configuration I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: using eatmydata during job I: Copying source file I: copying [nullmailer_2.2-3.dsc] I: copying [./nullmailer_2.2.orig.tar.gz] I: copying [./nullmailer_2.2-3.debian.tar.xz] I: Extracting source gpgv: unknown type of key resource 'trustedkeys.kbx' gpgv: keyblock resource '/root/.gnupg/trustedkeys.kbx': General error gpgv: Signature made Mon Dec 24 11:38:12 2018 -12 gpgv: using RSA key DD54B6767C834572950900A9F202971DA4A79E2C gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./nullmailer_2.2-3.dsc dpkg-source: info: extracting nullmailer in nullmailer-2.2 dpkg-source: info: unpacking nullmailer_2.2.orig.tar.gz dpkg-source: info: unpacking nullmailer_2.2-3.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying 0001-Remove-race-conditions-from-tests.patch dpkg-source: info: applying 0004-Sort-files-in-archive-reproducible-builds.patch dpkg-source: info: applying 0004-Allow-unqualified-sender-address.patch dpkg-source: info: applying 0005-Provide-for-etc-mailname.patch dpkg-source: info: applying 0006-Refer-to-manpages-and-locations-provided-by-Debian.patch dpkg-source: info: applying 0006-Disable-DNS-using-test.patch dpkg-source: info: applying 0007-disable-all-smtp-auth-tests.patch I: using fakeroot in build. I: Installing the build-deps -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: i386 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: daemontools, debhelper (>= 10.8), libgnutls28-dev | libgnutls-dev, po-debconf, ucspi-tcp-ipv6 dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19234 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on daemontools; however: Package daemontools is not installed. pbuilder-satisfydepends-dummy depends on debhelper (>= 10.8); however: Package debhelper is not installed. pbuilder-satisfydepends-dummy depends on libgnutls28-dev | libgnutls-dev; however: Package libgnutls28-dev is not installed. Package libgnutls-dev is not installed. pbuilder-satisfydepends-dummy depends on po-debconf; however: Package po-debconf is not installed. pbuilder-satisfydepends-dummy depends on ucspi-tcp-ipv6; however: Package ucspi-tcp-ipv6 is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdmainutils{a} daemontools{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libbsd0{a} libcroco3{a} libelf1{a} libevent-2.1-6{a} libfile-stripnondeterminism-perl{a} libglib2.0-0{a} libgmp-dev{a} libgmpxx4ldbl{a} libgnutls-dane0{a} libgnutls-openssl27{a} libgnutls28-dev{a} libgnutlsxx28{a} libicu63{a} libidn2-dev{a} libmagic-mgc{a} libmagic1{a} libncurses6{a} libp11-kit-dev{a} libpipeline1{a} libsigsegv2{a} libtasn1-6-dev{a} libtool{a} libuchardet0{a} libunbound8{a} libxml2{a} m4{a} man-db{a} nettle-dev{a} po-debconf{a} sensible-utils{a} ucspi-tcp-ipv6{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libglib2.0-data libgpm2 libltdl-dev libmail-sendmail-perl libtasn1-doc lynx shared-mime-info wget xdg-user-dirs 0 packages upgraded, 47 newly installed, 0 to remove and 0 not upgraded. Need to get 24.1 MB of archives. After unpacking 83.1 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian buster/main i386 libbsd0 i386 0.9.1-2 [104 kB] Get: 2 http://deb.debian.org/debian buster/main i386 bsdmainutils i386 11.1.2+b1 [193 kB] Get: 3 http://deb.debian.org/debian buster/main i386 libuchardet0 i386 0.0.6-3 [65.2 kB] Get: 4 http://deb.debian.org/debian buster/main i386 groff-base i386 1.22.4-3 [935 kB] Get: 5 http://deb.debian.org/debian buster/main i386 libpipeline1 i386 1.5.1-2 [33.3 kB] Get: 6 http://deb.debian.org/debian buster/main i386 man-db i386 2.8.5-2 [1284 kB] Get: 7 http://deb.debian.org/debian buster/main i386 sensible-utils all 0.0.12 [15.8 kB] Get: 8 http://deb.debian.org/debian buster/main i386 libmagic-mgc i386 1:5.35-4+deb10u1 [242 kB] Get: 9 http://deb.debian.org/debian buster/main i386 libmagic1 i386 1:5.35-4+deb10u1 [124 kB] Get: 10 http://deb.debian.org/debian buster/main i386 file i386 1:5.35-4+deb10u1 [66.3 kB] Get: 11 http://deb.debian.org/debian buster/main i386 gettext-base i386 0.19.8.1-9 [124 kB] Get: 12 http://deb.debian.org/debian buster/main i386 libsigsegv2 i386 2.12-2 [33.2 kB] Get: 13 http://deb.debian.org/debian buster/main i386 m4 i386 1.4.18-2 [205 kB] Get: 14 http://deb.debian.org/debian buster/main i386 autoconf all 2.69-11 [341 kB] Get: 15 http://deb.debian.org/debian buster/main i386 autotools-dev all 20180224.1 [77.0 kB] Get: 16 http://deb.debian.org/debian buster/main i386 automake all 1:1.16.1-4 [771 kB] Get: 17 http://deb.debian.org/debian buster/main i386 autopoint all 0.19.8.1-9 [434 kB] Get: 18 http://deb.debian.org/debian buster/main i386 daemontools i386 1:0.76-7 [61.4 kB] Get: 19 http://deb.debian.org/debian buster/main i386 libtool all 2.4.6-9 [547 kB] Get: 20 http://deb.debian.org/debian buster/main i386 dh-autoreconf all 19 [16.9 kB] Get: 21 http://deb.debian.org/debian buster/main i386 libarchive-zip-perl all 1.64-1 [96.8 kB] Get: 22 http://deb.debian.org/debian buster/main i386 libfile-stripnondeterminism-perl all 1.1.2-1 [19.8 kB] Get: 23 http://deb.debian.org/debian buster/main i386 dh-strip-nondeterminism all 1.1.2-1 [13.0 kB] Get: 24 http://deb.debian.org/debian buster/main i386 libelf1 i386 0.176-1.1 [166 kB] Get: 25 http://deb.debian.org/debian buster/main i386 dwz i386 0.12-3 [81.4 kB] Get: 26 http://deb.debian.org/debian buster/main i386 libglib2.0-0 i386 2.58.3-2+deb10u2 [1334 kB] Get: 27 http://deb.debian.org/debian buster/main i386 libicu63 i386 63.1-6+deb10u1 [8451 kB] Get: 28 http://deb.debian.org/debian buster/main i386 libxml2 i386 2.9.4+dfsg1-7+b3 [721 kB] Get: 29 http://deb.debian.org/debian buster/main i386 libcroco3 i386 0.6.12-3 [151 kB] Get: 30 http://deb.debian.org/debian buster/main i386 libncurses6 i386 6.1+20181013-2+deb10u2 [109 kB] Get: 31 http://deb.debian.org/debian buster/main i386 gettext i386 0.19.8.1-9 [1314 kB] Get: 32 http://deb.debian.org/debian buster/main i386 intltool-debian all 0.35.0+20060710.5 [26.8 kB] Get: 33 http://deb.debian.org/debian buster/main i386 po-debconf all 1.0.21 [248 kB] Get: 34 http://deb.debian.org/debian buster/main i386 debhelper all 12.1.1 [1016 kB] Get: 35 http://deb.debian.org/debian buster/main i386 libevent-2.1-6 i386 2.1.8-stable-4 [191 kB] Get: 36 http://deb.debian.org/debian buster/main i386 libgmpxx4ldbl i386 2:6.1.2+dfsg-4 [23.2 kB] Get: 37 http://deb.debian.org/debian buster/main i386 libgmp-dev i386 2:6.1.2+dfsg-4 [648 kB] Get: 38 http://deb.debian.org/debian buster/main i386 libunbound8 i386 1.9.0-2+deb10u1 [492 kB] Get: 39 http://deb.debian.org/debian buster/main i386 libgnutls-dane0 i386 3.6.7-4+deb10u3 [317 kB] Get: 40 http://deb.debian.org/debian buster/main i386 libgnutls-openssl27 i386 3.6.7-4+deb10u3 [317 kB] Get: 41 http://deb.debian.org/debian buster/main i386 libgnutlsxx28 i386 3.6.7-4+deb10u3 [15.6 kB] Get: 42 http://deb.debian.org/debian buster/main i386 libidn2-dev i386 2.0.5-1+deb10u1 [80.4 kB] Get: 43 http://deb.debian.org/debian buster/main i386 libp11-kit-dev i386 0.23.15-2 [195 kB] Get: 44 http://deb.debian.org/debian buster/main i386 libtasn1-6-dev i386 4.13-3 [107 kB] Get: 45 http://deb.debian.org/debian buster/main i386 nettle-dev i386 3.4.1-1 [1101 kB] Get: 46 http://deb.debian.org/debian buster/main i386 libgnutls28-dev i386 3.6.7-4+deb10u3 [1148 kB] Get: 47 http://deb.debian.org/debian buster/main i386 ucspi-tcp-ipv6 i386 1:0.88-6 [78.6 kB] Fetched 24.1 MB in 1s (47.9 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package libbsd0:i386. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19234 files and directories currently installed.) Preparing to unpack .../00-libbsd0_0.9.1-2_i386.deb ... Unpacking libbsd0:i386 (0.9.1-2) ... Selecting previously unselected package bsdmainutils. Preparing to unpack .../01-bsdmainutils_11.1.2+b1_i386.deb ... Unpacking bsdmainutils (11.1.2+b1) ... Selecting previously unselected package libuchardet0:i386. Preparing to unpack .../02-libuchardet0_0.0.6-3_i386.deb ... Unpacking libuchardet0:i386 (0.0.6-3) ... Selecting previously unselected package groff-base. Preparing to unpack .../03-groff-base_1.22.4-3_i386.deb ... Unpacking groff-base (1.22.4-3) ... Selecting previously unselected package libpipeline1:i386. Preparing to unpack .../04-libpipeline1_1.5.1-2_i386.deb ... Unpacking libpipeline1:i386 (1.5.1-2) ... Selecting previously unselected package man-db. Preparing to unpack .../05-man-db_2.8.5-2_i386.deb ... Unpacking man-db (2.8.5-2) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../06-sensible-utils_0.0.12_all.deb ... Unpacking sensible-utils (0.0.12) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../07-libmagic-mgc_1%3a5.35-4+deb10u1_i386.deb ... Unpacking libmagic-mgc (1:5.35-4+deb10u1) ... Selecting previously unselected package libmagic1:i386. Preparing to unpack .../08-libmagic1_1%3a5.35-4+deb10u1_i386.deb ... Unpacking libmagic1:i386 (1:5.35-4+deb10u1) ... Selecting previously unselected package file. Preparing to unpack .../09-file_1%3a5.35-4+deb10u1_i386.deb ... Unpacking file (1:5.35-4+deb10u1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../10-gettext-base_0.19.8.1-9_i386.deb ... Unpacking gettext-base (0.19.8.1-9) ... Selecting previously unselected package libsigsegv2:i386. Preparing to unpack .../11-libsigsegv2_2.12-2_i386.deb ... Unpacking libsigsegv2:i386 (2.12-2) ... Selecting previously unselected package m4. Preparing to unpack .../12-m4_1.4.18-2_i386.deb ... Unpacking m4 (1.4.18-2) ... Selecting previously unselected package autoconf. Preparing to unpack .../13-autoconf_2.69-11_all.deb ... Unpacking autoconf (2.69-11) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../14-autotools-dev_20180224.1_all.deb ... Unpacking autotools-dev (20180224.1) ... Selecting previously unselected package automake. Preparing to unpack .../15-automake_1%3a1.16.1-4_all.deb ... Unpacking automake (1:1.16.1-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../16-autopoint_0.19.8.1-9_all.deb ... Unpacking autopoint (0.19.8.1-9) ... Selecting previously unselected package daemontools. Preparing to unpack .../17-daemontools_1%3a0.76-7_i386.deb ... Unpacking daemontools (1:0.76-7) ... Selecting previously unselected package libtool. Preparing to unpack .../18-libtool_2.4.6-9_all.deb ... Unpacking libtool (2.4.6-9) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../19-dh-autoreconf_19_all.deb ... Unpacking dh-autoreconf (19) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../20-libarchive-zip-perl_1.64-1_all.deb ... Unpacking libarchive-zip-perl (1.64-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../21-libfile-stripnondeterminism-perl_1.1.2-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.1.2-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../22-dh-strip-nondeterminism_1.1.2-1_all.deb ... Unpacking dh-strip-nondeterminism (1.1.2-1) ... Selecting previously unselected package libelf1:i386. Preparing to unpack .../23-libelf1_0.176-1.1_i386.deb ... Unpacking libelf1:i386 (0.176-1.1) ... Selecting previously unselected package dwz. Preparing to unpack .../24-dwz_0.12-3_i386.deb ... Unpacking dwz (0.12-3) ... Selecting previously unselected package libglib2.0-0:i386. Preparing to unpack .../25-libglib2.0-0_2.58.3-2+deb10u2_i386.deb ... Unpacking libglib2.0-0:i386 (2.58.3-2+deb10u2) ... Selecting previously unselected package libicu63:i386. Preparing to unpack .../26-libicu63_63.1-6+deb10u1_i386.deb ... Unpacking libicu63:i386 (63.1-6+deb10u1) ... Selecting previously unselected package libxml2:i386. Preparing to unpack .../27-libxml2_2.9.4+dfsg1-7+b3_i386.deb ... Unpacking libxml2:i386 (2.9.4+dfsg1-7+b3) ... Selecting previously unselected package libcroco3:i386. Preparing to unpack .../28-libcroco3_0.6.12-3_i386.deb ... Unpacking libcroco3:i386 (0.6.12-3) ... Selecting previously unselected package libncurses6:i386. Preparing to unpack .../29-libncurses6_6.1+20181013-2+deb10u2_i386.deb ... Unpacking libncurses6:i386 (6.1+20181013-2+deb10u2) ... Selecting previously unselected package gettext. Preparing to unpack .../30-gettext_0.19.8.1-9_i386.deb ... Unpacking gettext (0.19.8.1-9) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../31-intltool-debian_0.35.0+20060710.5_all.deb ... Unpacking intltool-debian (0.35.0+20060710.5) ... Selecting previously unselected package po-debconf. Preparing to unpack .../32-po-debconf_1.0.21_all.deb ... Unpacking po-debconf (1.0.21) ... Selecting previously unselected package debhelper. Preparing to unpack .../33-debhelper_12.1.1_all.deb ... Unpacking debhelper (12.1.1) ... Selecting previously unselected package libevent-2.1-6:i386. Preparing to unpack .../34-libevent-2.1-6_2.1.8-stable-4_i386.deb ... Unpacking libevent-2.1-6:i386 (2.1.8-stable-4) ... Selecting previously unselected package libgmpxx4ldbl:i386. Preparing to unpack .../35-libgmpxx4ldbl_2%3a6.1.2+dfsg-4_i386.deb ... Unpacking libgmpxx4ldbl:i386 (2:6.1.2+dfsg-4) ... Selecting previously unselected package libgmp-dev:i386. Preparing to unpack .../36-libgmp-dev_2%3a6.1.2+dfsg-4_i386.deb ... Unpacking libgmp-dev:i386 (2:6.1.2+dfsg-4) ... Selecting previously unselected package libunbound8:i386. Preparing to unpack .../37-libunbound8_1.9.0-2+deb10u1_i386.deb ... Unpacking libunbound8:i386 (1.9.0-2+deb10u1) ... Selecting previously unselected package libgnutls-dane0:i386. Preparing to unpack .../38-libgnutls-dane0_3.6.7-4+deb10u3_i386.deb ... Unpacking libgnutls-dane0:i386 (3.6.7-4+deb10u3) ... Selecting previously unselected package libgnutls-openssl27:i386. Preparing to unpack .../39-libgnutls-openssl27_3.6.7-4+deb10u3_i386.deb ... Unpacking libgnutls-openssl27:i386 (3.6.7-4+deb10u3) ... Selecting previously unselected package libgnutlsxx28:i386. Preparing to unpack .../40-libgnutlsxx28_3.6.7-4+deb10u3_i386.deb ... Unpacking libgnutlsxx28:i386 (3.6.7-4+deb10u3) ... Selecting previously unselected package libidn2-dev:i386. Preparing to unpack .../41-libidn2-dev_2.0.5-1+deb10u1_i386.deb ... Unpacking libidn2-dev:i386 (2.0.5-1+deb10u1) ... Selecting previously unselected package libp11-kit-dev:i386. Preparing to unpack .../42-libp11-kit-dev_0.23.15-2_i386.deb ... Unpacking libp11-kit-dev:i386 (0.23.15-2) ... Selecting previously unselected package libtasn1-6-dev:i386. Preparing to unpack .../43-libtasn1-6-dev_4.13-3_i386.deb ... Unpacking libtasn1-6-dev:i386 (4.13-3) ... Selecting previously unselected package nettle-dev:i386. Preparing to unpack .../44-nettle-dev_3.4.1-1_i386.deb ... Unpacking nettle-dev:i386 (3.4.1-1) ... Selecting previously unselected package libgnutls28-dev:i386. Preparing to unpack .../45-libgnutls28-dev_3.6.7-4+deb10u3_i386.deb ... Unpacking libgnutls28-dev:i386 (3.6.7-4+deb10u3) ... Selecting previously unselected package ucspi-tcp-ipv6. Preparing to unpack .../46-ucspi-tcp-ipv6_1%3a0.88-6_i386.deb ... Unpacking ucspi-tcp-ipv6 (1:0.88-6) ... Setting up libpipeline1:i386 (1.5.1-2) ... Setting up libgnutls-openssl27:i386 (3.6.7-4+deb10u3) ... Setting up libmagic-mgc (1:5.35-4+deb10u1) ... Setting up libarchive-zip-perl (1.64-1) ... Setting up libglib2.0-0:i386 (2.58.3-2+deb10u2) ... No schema files found: doing nothing. Setting up libmagic1:i386 (1:5.35-4+deb10u1) ... Setting up gettext-base (0.19.8.1-9) ... Setting up file (1:5.35-4+deb10u1) ... Setting up libicu63:i386 (63.1-6+deb10u1) ... Setting up autotools-dev (20180224.1) ... Setting up libgmpxx4ldbl:i386 (2:6.1.2+dfsg-4) ... Setting up libncurses6:i386 (6.1+20181013-2+deb10u2) ... Setting up libsigsegv2:i386 (2.12-2) ... Setting up autopoint (0.19.8.1-9) ... Setting up libgnutlsxx28:i386 (3.6.7-4+deb10u3) ... Setting up ucspi-tcp-ipv6 (1:0.88-6) ... Setting up libidn2-dev:i386 (2.0.5-1+deb10u1) ... Setting up libevent-2.1-6:i386 (2.1.8-stable-4) ... Setting up sensible-utils (0.0.12) ... Setting up libuchardet0:i386 (0.0.6-3) ... Setting up daemontools (1:0.76-7) ... Setting up libtasn1-6-dev:i386 (4.13-3) ... Setting up libbsd0:i386 (0.9.1-2) ... Setting up libelf1:i386 (0.176-1.1) ... Setting up libxml2:i386 (2.9.4+dfsg1-7+b3) ... Setting up libp11-kit-dev:i386 (0.23.15-2) ... Setting up libfile-stripnondeterminism-perl (1.1.2-1) ... Setting up libgmp-dev:i386 (2:6.1.2+dfsg-4) ... Setting up nettle-dev:i386 (3.4.1-1) ... Setting up libtool (2.4.6-9) ... Setting up m4 (1.4.18-2) ... Setting up libunbound8:i386 (1.9.0-2+deb10u1) ... Setting up bsdmainutils (11.1.2+b1) ... update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode Setting up libcroco3:i386 (0.6.12-3) ... Setting up autoconf (2.69-11) ... Setting up dwz (0.12-3) ... Setting up groff-base (1.22.4-3) ... Setting up automake (1:1.16.1-4) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libgnutls-dane0:i386 (3.6.7-4+deb10u3) ... Setting up gettext (0.19.8.1-9) ... Setting up man-db (2.8.5-2) ... Not building database; man-db/auto-update is not 'true'. Setting up intltool-debian (0.35.0+20060710.5) ... Setting up libgnutls28-dev:i386 (3.6.7-4+deb10u3) ... Setting up po-debconf (1.0.21) ... Setting up debhelper (12.1.1) ... Setting up dh-autoreconf (19) ... Setting up dh-strip-nondeterminism (1.1.2-1) ... Processing triggers for libc-bin (2.28-10) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.23-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/nullmailer-2.2/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b dpkg-buildpackage: info: source package nullmailer dpkg-buildpackage: info: source version 1:2.2-3 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by David Bremner dpkg-source --before-build . dpkg-buildpackage: info: host architecture i386 fakeroot debian/rules clean dh clean dh_clean debian/rules build dh build dh_update_autotools_config debian/rules override_dh_autoreconf make[1]: Entering directory '/build/nullmailer-2.2' touch ChangeLog dh_autoreconf configure.ac:9: installing './compile' configure.ac:4: installing './install-sh' configure.ac:4: installing './missing' lib/Makefile.am: installing './depcomp' make[1]: Leaving directory '/build/nullmailer-2.2' debian/rules override_dh_auto_configure make[1]: Entering directory '/build/nullmailer-2.2' dh_auto_configure -- --libexecdir=/usr/lib --enable-tls ./configure --build=i686-linux-gnu --prefix=/usr --includedir=\${prefix}/include --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info --sysconfdir=/etc --localstatedir=/var --disable-silent-rules --libdir=\${prefix}/lib/i386-linux-gnu --libexecdir=\${prefix}/lib/i386-linux-gnu --disable-maintainer-mode --disable-dependency-tracking --libexecdir=/usr/lib --enable-tls configure: WARNING: unrecognized options: --disable-maintainer-mode checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking whether make supports the include directive... yes (GNU style) checking dependency style of gcc... none checking for g++... g++ checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking dependency style of g++... none checking whether g++ accepts -fno-rtti... yes checking whether g++ accepts -fno-exceptions... yes checking for special C compiler options needed for large files... no checking for _FILE_OFFSET_BITS value needed for large files... 64 checking for ranlib... ranlib checking for strip... /usr/bin/strip checking for rm... /bin/rm checking for mkdir... /bin/mkdir checking for socket in -lxnet... no checking for socket in -linet... no checking for socket in -lsocket... no checking for dirent.h that defines DIR... yes checking for library containing opendir... none required checking how to run the C++ preprocessor... g++ -E checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ANSI C header files... yes checking for sys/wait.h that is POSIX.1 compatible... yes checking whether time.h and sys/time.h may both be included... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking sys/time.h usability... yes checking sys/time.h presence... yes checking for sys/time.h... yes checking for unistd.h... (cached) yes checking for size_t... yes checking whether struct tm contains tm_isdst... yes checking whether struct tm contains __tm_isdst... no checking whether struct tm contains tm_gmtoff... yes checking whether struct tm contains __tm_gmtoff... no checking whether struct utsname contains domainname... yes checking whether struct utsname contains __domainname... no checking whether named pipes are buggy... no checking for setenv... yes checking for srandom... yes checking for getaddrinfo... yes checking for gnutls_certificate_set_verify_function in -lgnutls... yes checking for gnutls_priority_set_direct in -lgnutls... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating doc/Makefile config.status: creating lib/Makefile config.status: creating lib/cli++/Makefile config.status: creating lib/fdbuf/Makefile config.status: creating lib/mystring/Makefile config.status: creating protocols/Makefile config.status: creating src/Makefile config.status: creating test/Makefile config.status: creating config.h config.status: executing depfiles commands configure: WARNING: unrecognized options: --disable-maintainer-mode make[1]: Leaving directory '/build/nullmailer-2.2' dh_auto_build make -j18 make[1]: Entering directory '/build/nullmailer-2.2' make all-recursive make[2]: Entering directory '/build/nullmailer-2.2' Making all in doc make[3]: Entering directory '/build/nullmailer-2.2/doc' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/build/nullmailer-2.2/doc' Making all in lib make[3]: Entering directory '/build/nullmailer-2.2/lib' Making all in cli++ make[4]: Entering directory '/build/nullmailer-2.2/lib/cli++' g++ -DHAVE_CONFIG_H -I. -I../.. -I../../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -c -o main.o main.cc g++ -DHAVE_CONFIG_H -I. -I../.. -I../../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -c -o messages.o messages.cc g++ -DHAVE_CONFIG_H -I. -I../.. -I../../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -c -o only_long.o only_long.cc rm -f libcli++.a ar cru libcli++.a main.o messages.o only_long.o ar: `u' modifier ignored since `D' is the default (see `U') ranlib libcli++.a make[4]: Leaving directory '/build/nullmailer-2.2/lib/cli++' Making all in fdbuf make[4]: Entering directory '/build/nullmailer-2.2/lib/fdbuf' g++ -DHAVE_CONFIG_H -I. -I../.. -I../../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -c -o fdbuf.o fdbuf.cc g++ -DHAVE_CONFIG_H -I. -I../.. -I../../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -c -o fdbuf_copy.o fdbuf_copy.cc g++ -DHAVE_CONFIG_H -I. -I../.. -I../../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -c -o fdibuf.o fdibuf.cc g++ -DHAVE_CONFIG_H -I. -I../.. -I../../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -c -o fdobuf.o fdobuf.cc g++ -DHAVE_CONFIG_H -I. -I../.. -I../../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -c -o fdobuf_chownmod.o fdobuf_chownmod.cc g++ -DHAVE_CONFIG_H -I. -I../.. -I../../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -c -o fdobuf_seek.o fdobuf_seek.cc g++ -DHAVE_CONFIG_H -I. -I../.. -I../../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -c -o fdobuf_signed.o fdobuf_signed.cc g++ -DHAVE_CONFIG_H -I. -I../.. -I../../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -c -o fdobuf_unsigned.o fdobuf_unsigned.cc g++ -DHAVE_CONFIG_H -I. -I../.. -I../../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -c -o tlsibuf.o tlsibuf.cc g++ -DHAVE_CONFIG_H -I. -I../.. -I../../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -c -o tlsobuf.o tlsobuf.cc g++ -DHAVE_CONFIG_H -I. -I../.. -I../../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -c -o fdibuf_mystring.o fdibuf_mystring.cc g++ -DHAVE_CONFIG_H -I. -I../.. -I../../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -c -o fdibuf_netstring.o fdibuf_netstring.cc rm -f libfdbuf.a ar cru libfdbuf.a fdbuf.o fdbuf_copy.o fdibuf.o fdobuf.o fdobuf_chownmod.o fdobuf_seek.o fdobuf_signed.o fdobuf_unsigned.o tlsibuf.o tlsobuf.o fdibuf_mystring.o fdibuf_netstring.o ar: `u' modifier ignored since `D' is the default (see `U') ranlib libfdbuf.a make[4]: Leaving directory '/build/nullmailer-2.2/lib/fdbuf' Making all in mystring make[4]: Entering directory '/build/nullmailer-2.2/lib/mystring' g++ -DHAVE_CONFIG_H -I. -I../.. -I../../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -c -o append.o append.cc g++ -DHAVE_CONFIG_H -I. -I../.. -I../../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -c -o assign.o assign.cc g++ -DHAVE_CONFIG_H -I. -I../.. -I../../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -c -o count.o count.cc g++ -DHAVE_CONFIG_H -I. -I../.. -I../../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -c -o fdobuf.o fdobuf.cc g++ -DHAVE_CONFIG_H -I. -I../.. -I../../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -c -o find_first_ch.o find_first_ch.cc g++ -DHAVE_CONFIG_H -I. -I../.. -I../../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -c -o find_first_of.o find_first_of.cc g++ -DHAVE_CONFIG_H -I. -I../.. -I../../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -c -o find_last_ch.o find_last_ch.cc g++ -DHAVE_CONFIG_H -I. -I../.. -I../../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -c -o find_last_of.o find_last_of.cc g++ -DHAVE_CONFIG_H -I. -I../.. -I../../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -c -o iter.o iter.cc g++ -DHAVE_CONFIG_H -I. -I../.. -I../../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -c -o join.o join.cc g++ -DHAVE_CONFIG_H -I. -I../.. -I../../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -c -o lower.o lower.cc g++ -DHAVE_CONFIG_H -I. -I../.. -I../../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -c -o lstrip.o lstrip.cc g++ -DHAVE_CONFIG_H -I. -I../.. -I../../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -c -o mystring.o mystring.cc g++ -DHAVE_CONFIG_H -I. -I../.. -I../../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -c -o rep.o rep.cc g++ -DHAVE_CONFIG_H -I. -I../.. -I../../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -c -o starts_with.o starts_with.cc g++ -DHAVE_CONFIG_H -I. -I../.. -I../../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -c -o rstrip.o rstrip.cc g++ -DHAVE_CONFIG_H -I. -I../.. -I../../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -c -o sub.o sub.cc g++ -DHAVE_CONFIG_H -I. -I../.. -I../../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -c -o subst.o subst.cc g++ -DHAVE_CONFIG_H -I. -I../.. -I../../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -c -o strip.o strip.cc g++ -DHAVE_CONFIG_H -I. -I../.. -I../../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -c -o upper.o upper.cc rm -f libmystring.a ar cru libmystring.a append.o assign.o count.o fdobuf.o find_first_ch.o find_first_of.o find_last_ch.o find_last_of.o iter.o join.o lower.o lstrip.o mystring.o rep.o starts_with.o rstrip.o sub.o subst.o strip.o upper.o ar: `u' modifier ignored since `D' is the default (see `U') ranlib libmystring.a make[4]: Leaving directory '/build/nullmailer-2.2/lib/mystring' make[4]: Entering directory '/build/nullmailer-2.2/lib' g++ -DHAVE_CONFIG_H -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -c -o address.o address.cc g++ -DHAVE_CONFIG_H -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -c -o argparse.o argparse.cc g++ -DHAVE_CONFIG_H -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -c -o base64.o base64.cc g++ -DHAVE_CONFIG_H -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -c -o canonicalize.o canonicalize.cc g++ -DHAVE_CONFIG_H -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -c -o config_path.o config_path.cc g++ -DHAVE_CONFIG_H -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -c -o config_read.o config_read.cc g++ -DHAVE_CONFIG_H -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -c -o config_readlist.o config_readlist.cc g++ -DHAVE_CONFIG_H -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -c -o config_readint.o config_readint.cc g++ -DHAVE_CONFIG_H -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -c -o config_syserr.o config_syserr.cc g++ -DHAVE_CONFIG_H -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -c -o tcpconnect.o tcpconnect.cc g++ -DHAVE_CONFIG_H -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -c -o errcodes.o errcodes.cc g++ -DHAVE_CONFIG_H -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -c -o hostname.o hostname.cc g++ -DHAVE_CONFIG_H -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -c -o itoa.o itoa.cc g++ -DHAVE_CONFIG_H -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -c -o makefield.o makefield.cc g++ -DHAVE_CONFIG_H -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -c -o netstring.o netstring.cc g++ -DHAVE_CONFIG_H -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -c -o forkexec.o forkexec.cc g++ -DHAVE_CONFIG_H -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -c -o selfpipe.o selfpipe.cc g++ -DHAVE_CONFIG_H -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -c -o setenv.o setenv.cc itoa.cc: In function 'const char* itoa(long int, int)': itoa.cc:18:32: warning: array subscript -1 is below array bounds of 'char [64]' [-Warray-bounds] while(digits > 0 && ptr > buf-1) ~~~^~ Creating defines.cc g++ -DHAVE_CONFIG_H -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -c -o defines.o defines.cc selfpipe.cc: In function 'void catcher(int)': selfpipe.cc:69:8: warning: ignoring return value of 'ssize_t write(int, const void*, size_t)', declared with attribute warn_unused_result [-Wunused-result] write(fds[1], &sig, sizeof sig); ~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~ rm -f libmisc.a ar cru libmisc.a address.o argparse.o base64.o canonicalize.o config_path.o config_read.o config_readlist.o config_readint.o config_syserr.o tcpconnect.o errcodes.o hostname.o itoa.o makefield.o netstring.o forkexec.o selfpipe.o setenv.o defines.o ar: `u' modifier ignored since `D' is the default (see `U') ranlib libmisc.a /bin/rm -f libnullmailer.a sh ./mergelib.sh libnullmailer.a \ libmisc.a \ fdbuf/libfdbuf.a \ mystring/libmystring.a make[4]: Leaving directory '/build/nullmailer-2.2/lib' make[3]: Leaving directory '/build/nullmailer-2.2/lib' Making all in protocols make[3]: Entering directory '/build/nullmailer-2.2/protocols' g++ -DHAVE_CONFIG_H -I. -I.. -I../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -c -o smtp.o smtp.cc g++ -DHAVE_CONFIG_H -I. -I.. -I../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -c -o protocol.o protocol.cc g++ -DHAVE_CONFIG_H -I. -I.. -I../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -c -o tls_gnutls.o tls_gnutls.cc g++ -DHAVE_CONFIG_H -I. -I.. -I../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -c -o qmqp.o qmqp.cc g++ -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -Wl,-z,relro -Wl,-z,now -Wl,-z,defs -Wl,--as-needed -o qmqp qmqp.o protocol.o tls_gnutls.o ../lib/cli++/libcli++.a ../lib/libnullmailer.a -lgnutls g++ -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -Wl,-z,relro -Wl,-z,now -Wl,-z,defs -Wl,--as-needed -o smtp smtp.o protocol.o tls_gnutls.o ../lib/cli++/libcli++.a ../lib/libnullmailer.a -lgnutls make[3]: Leaving directory '/build/nullmailer-2.2/protocols' Making all in src make[3]: Entering directory '/build/nullmailer-2.2/src' g++ -DHAVE_CONFIG_H -I. -I.. -I../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -c -o mailq.o mailq.cc g++ -DHAVE_CONFIG_H -I. -I.. -I../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -c -o dsn.o dsn.cc g++ -DHAVE_CONFIG_H -I. -I.. -I../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -c -o inject.o inject.cc g++ -DHAVE_CONFIG_H -I. -I.. -I../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -c -o smtpd.o smtpd.cc g++ -DHAVE_CONFIG_H -I. -I.. -I../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -c -o queue.o queue.cc g++ -DHAVE_CONFIG_H -I. -I.. -I../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -c -o send.o send.cc g++ -DHAVE_CONFIG_H -I. -I.. -I../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -c -o sendmail.o sendmail.cc queue.cc: In function 'void trigger()': queue.cc:81:8: warning: ignoring return value of 'ssize_t write(int, const void*, size_t)', declared with attribute warn_unused_result [-Wunused-result] write(fd, &x, 1); ~~~~~^~~~~~~~~~~ send.cc: In function 'bool read_trigger()': send.cc:446:9: warning: ignoring return value of 'ssize_t read(int, void*, size_t)', declared with attribute warn_unused_result [-Wunused-result] read(trigger, buf, sizeof buf); ~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~ g++ -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -Wl,-z,relro -Wl,-z,now -Wl,-z,defs -Wl,--as-needed -o mailq mailq.o ../lib/libnullmailer.a g++ -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -Wl,-z,relro -Wl,-z,now -Wl,-z,defs -Wl,--as-needed -o sendmail sendmail.o ../lib/cli++/libcli++.a ../lib/libnullmailer.a g++ -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -Wl,-z,relro -Wl,-z,now -Wl,-z,defs -Wl,--as-needed -o nullmailer-queue queue.o ../lib/libnullmailer.a ../lib/cli++/libcli++.a g++ -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -Wl,-z,relro -Wl,-z,now -Wl,-z,defs -Wl,--as-needed -o nullmailer-smtpd smtpd.o ../lib/libnullmailer.a g++ -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -Wl,-z,relro -Wl,-z,now -Wl,-z,defs -Wl,--as-needed -o nullmailer-dsn dsn.o ../lib/libnullmailer.a ../lib/cli++/libcli++.a g++ -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -Wl,-z,relro -Wl,-z,now -Wl,-z,defs -Wl,--as-needed -o nullmailer-send send.o ../lib/libnullmailer.a ../lib/cli++/libcli++.a g++ -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -Wl,-z,relro -Wl,-z,now -Wl,-z,defs -Wl,--as-needed -o nullmailer-inject inject.o ../lib/libnullmailer.a ../lib/cli++/libcli++.a make[3]: Leaving directory '/build/nullmailer-2.2/src' Making all in test make[3]: Entering directory '/build/nullmailer-2.2/test' g++ -DHAVE_CONFIG_H -I. -I.. -I../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -c -o address-test.o address-test.cc g++ -DHAVE_CONFIG_H -I. -I.. -I../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -c -o argparse-test.o argparse-test.cc g++ -DHAVE_CONFIG_H -I. -I.. -I../lib -DCLI_ONLY_LONG=false -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -c -o clitest0-clitest.o `test -f 'clitest.cc' || echo './'`clitest.cc g++ -DHAVE_CONFIG_H -I. -I.. -I../lib -DCLI_ONLY_LONG=true -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -c -o clitest1-clitest.o `test -f 'clitest.cc' || echo './'`clitest.cc sed -e 's,[@]SRCDIR[@],/build/nullmailer-2.2,g; s,[@]BUILDDIR[@],/build/nullmailer-2.2,g;' < functions.in > functions g++ -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -Wl,-z,relro -Wl,-z,now -Wl,-z,defs -Wl,--as-needed -o clitest0 clitest0-clitest.o ../lib/libnullmailer.a ../lib/cli++/libcli++.a g++ -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -Wl,-z,relro -Wl,-z,now -Wl,-z,defs -Wl,--as-needed -o clitest1 clitest1-clitest.o ../lib/libnullmailer.a ../lib/cli++/libcli++.a g++ -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -Wl,-z,relro -Wl,-z,now -Wl,-z,defs -Wl,--as-needed -o argparse-test argparse-test.o ../lib/libnullmailer.a g++ -g -O2 -ffile-prefix-map=/build/nullmailer-2.2=. -fstack-protector-strong -Wformat -Werror=format-security -fno-rtti -fno-exceptions -W -Wall -Wl,-z,relro -Wl,-z,now -Wl,-z,defs -Wl,--as-needed -o address-test address-test.o ../lib/libnullmailer.a make[3]: Leaving directory '/build/nullmailer-2.2/test' make[3]: Entering directory '/build/nullmailer-2.2' make[3]: Leaving directory '/build/nullmailer-2.2' make[2]: Leaving directory '/build/nullmailer-2.2' make[1]: Leaving directory '/build/nullmailer-2.2' dh_auto_test make -j18 check VERBOSE=1 make[1]: Entering directory '/build/nullmailer-2.2' Making check in doc make[2]: Entering directory '/build/nullmailer-2.2/doc' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/build/nullmailer-2.2/doc' Making check in lib make[2]: Entering directory '/build/nullmailer-2.2/lib' Making check in cli++ make[3]: Entering directory '/build/nullmailer-2.2/lib/cli++' make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '/build/nullmailer-2.2/lib/cli++' Making check in fdbuf make[3]: Entering directory '/build/nullmailer-2.2/lib/fdbuf' make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '/build/nullmailer-2.2/lib/fdbuf' Making check in mystring make[3]: Entering directory '/build/nullmailer-2.2/lib/mystring' make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '/build/nullmailer-2.2/lib/mystring' make[3]: Entering directory '/build/nullmailer-2.2/lib' make[3]: Nothing to be done for 'check-am'. make[3]: Leaving directory '/build/nullmailer-2.2/lib' make[2]: Leaving directory '/build/nullmailer-2.2/lib' Making check in protocols make[2]: Entering directory '/build/nullmailer-2.2/protocols' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/build/nullmailer-2.2/protocols' Making check in src make[2]: Entering directory '/build/nullmailer-2.2/src' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/build/nullmailer-2.2/src' Making check in test make[2]: Entering directory '/build/nullmailer-2.2/test' ./address-test 42 tests run, 0 failed. ./argparse-test 14 tests run, 0 failed. sh ./clitest.sh All tests passed. ./runtests `find /build/nullmailer-2.2/test/tests -type f -not -name '.*'` Running test /build/nullmailer-2.2/test/tests/protocols... Testing protocol success with smtp (command-line) Testing protocol success with smtp (stdin) Testing protocol success with smtp (stdin, IPv6) Testing protocol success with smtp (source addr) Testing protocol failure with smtp (bad source addr 1) Testing protocol failure with smtp (bad source addr 2) Testing connection refused error with smtp. Testing connection refused error with smtp (IPv6). Testing usage error with smtp (zero args). Testing usage error with smtp (two args). Testing usage error with smtp (unknown option). Testing usage error with smtp (invalid integer). Testing protocol failure with smtp. Testing protocol success with qmqp (command-line) Testing protocol success with qmqp (stdin) Testing protocol success with qmqp (stdin, IPv6) Testing protocol success with qmqp (source addr) Testing protocol failure with qmqp (bad source addr 1) Testing protocol failure with qmqp (bad source addr 2) Testing connection refused error with qmqp. Testing connection refused error with qmqp (IPv6). Testing usage error with qmqp (zero args). Testing usage error with qmqp (two args). Testing usage error with qmqp (unknown option). Testing usage error with qmqp (invalid integer). Testing protocol failure with qmqp. Done. Running test /build/nullmailer-2.2/test/tests/inject/date... Checking that inject inserts a date line. Checking that inject preserves an existing date line. Checking that inject does not add more date lines. Done. Running test /build/nullmailer-2.2/test/tests/inject/from... Checking that inject inserts a from line. Checking that inject preserves an existing from line. Checking that inject does not add more from lines. Checking that inject will strip from lines. Checking that inject obeys me Checking that inject obeys config/defaulthost Checking that inject obeys config/defaultdomain Checking that inject ignores config/defaultdomain for localhost Checking that inject obeys HOSTNAME. Checking that inject obeys MAILHOST. Checking that inject obeys NULLMAILER_HOST. Checking that inject uses getpwnam Checking that inject obeys LOGNAME. Checking that inject obeys USER. Checking that inject obeys MAILUSER. Checking that inject obeys NULLMAILER_USER. Checking that inject obeys NAME. Checking that inject obeys MAILNAME. Checking that inject obeys NULLMAILER_NAME. Checking that inject will use address-comment form. Done. Running test /build/nullmailer-2.2/test/tests/inject/message-id... Checking that inject inserts a message-id. Checking that inject preserves an existing message-id. Checking that inject does not add more message-ids. Checking that inject will ignore an existing message-id. Checking that inject obeys me Checking that inject obeys config/idhost Done. Running test /build/nullmailer-2.2/test/tests/inject/return-path... Checking that inject does not inserts a return-path. Checking that inject strips return-paths. Done. Running test /build/nullmailer-2.2/test/tests/inject/recips... Checking that inject uses command line with -a. Checking that inject ignores header lines with -a. Checking that inject uses command line with -b. Checking that inject uses header lines with -b. Checking that inject ignores command line with -h. Checking that inject uses header lines with -h. Checking that inject uses command line with -e and no header. Checking that inject uses command line with -e and header. Checking that inject uses header with -e and no command line. Checking that inject ignores header with -e and command line. Checking that inject uses command line with no header by default. Checking that inject uses command line with header by default. Checking that inject uses header with no command line by default. Checking that inject ignores header with command line by default. Done. Running test /build/nullmailer-2.2/test/tests/inject/bad-headers... Checking that inject rejects leading continuation lines. No recipients were listed. Checking that inject rejects malformed RFC headers. No recipients were listed. No recipients were listed. No recipients were listed. Checking that inject rejects bad addresses. nullmailer-inject: Invalid header line: from: fooFrom " line Done. Running test /build/nullmailer-2.2/test/tests/inject/sender... Checking that inject obeys me Checking that inject obeys config/defaulthost Checking that inject obeys config/defaultdomain Checking that inject ignores config/defaultdomain for localhost Checking that inject obeys HOSTNAME. Checking that inject canonicalizes HOSTNAME. Checking that inject obeys MAILHOST. Checking that inject canonicalizes MAILHOST. Checking that inject obeys NULLMAILER_HOST. Checking that inject canonicalizes NULLMAILER_HOST. Checking that inject uses getpwnam Checking that inject obeys LOGNAME. Checking that inject obeys USER. Checking that inject obeys MAILUSER. Checking that inject obeys NULLMAILER_USER. Checking that inject ignores Errors-To: Checking that inject ignores From: Checking that inject ignores Reply-To: Checking that inject ignores Resent-From: Checking that inject ignores Resent-Reply-To: Checking that inject ignores Resent-Sender: Checking that inject ignores Return-Receipt-To: Checking that inject ignores Sender: Checking that inject uses Return-Path: Checking that inject ignores Return-Path: Checking that inject honors -f '' Checking that inject honors -f '<>' Checking that inject honors -f 'a@b.c' Checking that inject honors -f '' Checking that inject honors -f 'a@b' Checking that inject honors -f '' Done. Running test /build/nullmailer-2.2/test/tests/send... Testing sending with a succeeding protocol Testing sending with a failing protocol Testing handling of a permanent failure Checking failed message was moved out of the queue Checking for a generated bounce message Checking bounce sender Checking bounce recipient Checking bounce contents Checking log outputs Testing handling of rejected bounces Checking failed message was moved out of the queue Checking for no generated bounce message Checking log outputs Done. Running test /build/nullmailer-2.2/test/tests/smtpd... Testing the nullmailer-smtpd program testing queued message envelope testing queued message contents Done. Running test /build/nullmailer-2.2/test/tests/mailq... Testing the output of the mailq command Done. Running test /build/nullmailer-2.2/test/tests/dsn... Testing envelope: sender, recipient, end Testing header: from, to, subject, date, message-id, mime, content-type Testing report header: reporting-mta, date Testing recipient report 1: final-recipient, action, status, date Testing recipient report 2: final-recipient, action, status, date Testing quoted message pre-header Testing quoted message header Testing quoted message body Testing fixed bounce address Testing max-lines: 0, 1, 2, bouncelines=1, override Done. Running test /build/nullmailer-2.2/test/tests/queue/rewrite... Checking that queue rewrites user@localhost to adminaddr. Checking that queue rewrites user@hostname to adminaddr. Checking that queue does not rewrite non-local users. Checking that queue rewrites to multiple adminaddr. Checking that queue transmits the envelope sender normally. Checking that queue rewrites sender with allmailfrom. Done. Running test /build/nullmailer-2.2/test/tests/queue/validate... Testing queue from to Testing queue from <@b.c> to Testing queue from to <@e.f> Testing queue from <> to Done. Running test /build/nullmailer-2.2/test/tests/smtp-auth... Done. 17 tests run, 0 failed make[2]: Leaving directory '/build/nullmailer-2.2/test' make[2]: Entering directory '/build/nullmailer-2.2' make[2]: Leaving directory '/build/nullmailer-2.2' make[1]: Leaving directory '/build/nullmailer-2.2' create-stamp debian/debhelper-build-stamp fakeroot debian/rules binary dh binary dh_testroot debian/rules override_dh_prep make[1]: Entering directory '/build/nullmailer-2.2' dh_prep debconf-updatepo make[1]: Leaving directory '/build/nullmailer-2.2' dh_installdirs debian/rules override_dh_auto_install make[1]: Entering directory '/build/nullmailer-2.2' dh_auto_install make -j18 install DESTDIR=/build/nullmailer-2.2/debian/nullmailer AM_UPDATE_INFO_DIR=no make[2]: Entering directory '/build/nullmailer-2.2' Making install in doc make[3]: Entering directory '/build/nullmailer-2.2/doc' make[4]: Entering directory '/build/nullmailer-2.2/doc' make[4]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/build/nullmailer-2.2/debian/nullmailer/usr/share/man/man1' /bin/mkdir -p '/build/nullmailer-2.2/debian/nullmailer/usr/share/man/man7' /bin/mkdir -p '/build/nullmailer-2.2/debian/nullmailer/usr/share/man/man8' /usr/bin/install -c -m 644 nullmailer-dsn.1 nullmailer-inject.1 sendmail.1 '/build/nullmailer-2.2/debian/nullmailer/usr/share/man/man1' /usr/bin/install -c -m 644 nullmailer.7 '/build/nullmailer-2.2/debian/nullmailer/usr/share/man/man7' /usr/bin/install -c -m 644 nullmailer-queue.8 nullmailer-send.8 '/build/nullmailer-2.2/debian/nullmailer/usr/share/man/man8' make[4]: Leaving directory '/build/nullmailer-2.2/doc' make[3]: Leaving directory '/build/nullmailer-2.2/doc' Making install in lib make[3]: Entering directory '/build/nullmailer-2.2/lib' Making install in cli++ make[4]: Entering directory '/build/nullmailer-2.2/lib/cli++' make[5]: Entering directory '/build/nullmailer-2.2/lib/cli++' make[5]: Nothing to be done for 'install-exec-am'. make[5]: Nothing to be done for 'install-data-am'. make[5]: Leaving directory '/build/nullmailer-2.2/lib/cli++' make[4]: Leaving directory '/build/nullmailer-2.2/lib/cli++' Making install in fdbuf make[4]: Entering directory '/build/nullmailer-2.2/lib/fdbuf' make[5]: Entering directory '/build/nullmailer-2.2/lib/fdbuf' make[5]: Nothing to be done for 'install-exec-am'. make[5]: Nothing to be done for 'install-data-am'. make[5]: Leaving directory '/build/nullmailer-2.2/lib/fdbuf' make[4]: Leaving directory '/build/nullmailer-2.2/lib/fdbuf' Making install in mystring make[4]: Entering directory '/build/nullmailer-2.2/lib/mystring' make[5]: Entering directory '/build/nullmailer-2.2/lib/mystring' make[5]: Nothing to be done for 'install-exec-am'. make[5]: Nothing to be done for 'install-data-am'. make[5]: Leaving directory '/build/nullmailer-2.2/lib/mystring' make[4]: Leaving directory '/build/nullmailer-2.2/lib/mystring' make[4]: Entering directory '/build/nullmailer-2.2/lib' make[5]: Entering directory '/build/nullmailer-2.2/lib' make[5]: Nothing to be done for 'install-exec-am'. make[5]: Nothing to be done for 'install-data-am'. make[5]: Leaving directory '/build/nullmailer-2.2/lib' make[4]: Leaving directory '/build/nullmailer-2.2/lib' make[3]: Leaving directory '/build/nullmailer-2.2/lib' Making install in protocols make[3]: Entering directory '/build/nullmailer-2.2/protocols' make[4]: Entering directory '/build/nullmailer-2.2/protocols' make[4]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '/build/nullmailer-2.2/debian/nullmailer/usr/lib/nullmailer' /usr/bin/install -c smtp qmqp '/build/nullmailer-2.2/debian/nullmailer/usr/lib/nullmailer' make[4]: Leaving directory '/build/nullmailer-2.2/protocols' make[3]: Leaving directory '/build/nullmailer-2.2/protocols' Making install in src make[3]: Entering directory '/build/nullmailer-2.2/src' make[4]: Entering directory '/build/nullmailer-2.2/src' make[4]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '/build/nullmailer-2.2/debian/nullmailer/usr/bin' /bin/mkdir -p '/build/nullmailer-2.2/debian/nullmailer/usr/sbin' /usr/bin/install -c mailq nullmailer-dsn nullmailer-inject nullmailer-smtpd '/build/nullmailer-2.2/debian/nullmailer/usr/bin' /usr/bin/install -c nullmailer-queue nullmailer-send sendmail '/build/nullmailer-2.2/debian/nullmailer/usr/sbin' make[4]: Leaving directory '/build/nullmailer-2.2/src' make[3]: Leaving directory '/build/nullmailer-2.2/src' Making install in test make[3]: Entering directory '/build/nullmailer-2.2/test' make[4]: Entering directory '/build/nullmailer-2.2/test' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/build/nullmailer-2.2/test' make[3]: Leaving directory '/build/nullmailer-2.2/test' make[3]: Entering directory '/build/nullmailer-2.2' make[4]: Entering directory '/build/nullmailer-2.2' make[4]: Nothing to be done for 'install-exec-am'. /bin/bash /build/nullmailer-2.2/install-sh -d /build/nullmailer-2.2/debian/nullmailer/var/spool/nullmailer/failed chmod 700 /build/nullmailer-2.2/debian/nullmailer/var/spool/nullmailer/failed /bin/bash /build/nullmailer-2.2/install-sh -d /build/nullmailer-2.2/debian/nullmailer/var/spool/nullmailer/queue chmod 700 /build/nullmailer-2.2/debian/nullmailer/var/spool/nullmailer/queue /bin/bash /build/nullmailer-2.2/install-sh -d /build/nullmailer-2.2/debian/nullmailer/var/spool/nullmailer/tmp chmod 700 /build/nullmailer-2.2/debian/nullmailer/var/spool/nullmailer/tmp /bin/bash /build/nullmailer-2.2/install-sh -d /build/nullmailer-2.2/debian/nullmailer/etc/nullmailer /bin/rm -f /build/nullmailer-2.2/debian/nullmailer/var/spool/nullmailer/trigger mkfifo /build/nullmailer-2.2/debian/nullmailer/var/spool/nullmailer/trigger chmod 600 /build/nullmailer-2.2/debian/nullmailer/var/spool/nullmailer/trigger make[4]: Leaving directory '/build/nullmailer-2.2' make[3]: Leaving directory '/build/nullmailer-2.2' make[2]: Leaving directory '/build/nullmailer-2.2' rm -f /build/nullmailer-2.2/debian/nullmailer/var/spool/nullmailer/trigger make[1]: Leaving directory '/build/nullmailer-2.2' dh_install dh_installdocs debian/rules override_dh_installchangelogs make[1]: Entering directory '/build/nullmailer-2.2' dh_installchangelogs -k NEWS make[1]: Leaving directory '/build/nullmailer-2.2' dh_installman dh_installdebconf dh_systemd_enable dh_installinit debian/rules override_dh_systemd_start make[1]: Entering directory '/build/nullmailer-2.2' dh_systemd_start --no-restart-after-upgrade make[1]: Leaving directory '/build/nullmailer-2.2' dh_lintian dh_perl dh_link dh_strip_nondeterminism dh_compress debian/rules override_dh_fixperms make[1]: Entering directory '/build/nullmailer-2.2' dh_fixperms chown mail /build/nullmailer-2.2/debian/nullmailer/usr/sbin/nullmailer-queue /build/nullmailer-2.2/debian/nullmailer/usr/bin/mailq chmod 4755 /build/nullmailer-2.2/debian/nullmailer/usr/sbin/nullmailer-queue /build/nullmailer-2.2/debian/nullmailer/usr/bin/mailq chown -R mail:root /build/nullmailer-2.2/debian/nullmailer/var/spool/nullmailer chmod 0755 /build/nullmailer-2.2/debian/nullmailer/var/spool/nullmailer chmod 0750 /build/nullmailer-2.2/debian/nullmailer/var/spool/nullmailer/queue /build/nullmailer-2.2/debian/nullmailer/var/spool/nullmailer/tmp make[1]: Leaving directory '/build/nullmailer-2.2' dh_missing dh_strip dh_makeshlibs dh_shlibdeps dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'nullmailer-dbgsym' in '../nullmailer-dbgsym_2.2-3_i386.deb'. dpkg-deb: building package 'nullmailer' in '../nullmailer_2.2-3_i386.deb'. dpkg-genbuildinfo --build=binary dpkg-genchanges --build=binary >../nullmailer_2.2-3_i386.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/45847 and its subdirectories I: Current time: Thu Jul 1 07:24:21 -12 2021 I: pbuilder-time-stamp: 1625167461 Fri May 29 13:01:22 UTC 2020 I: 1st build successful. Starting 2nd build on remote node profitbricks-build2-i386.debian.net. Fri May 29 13:01:22 UTC 2020 I: Preparing to do remote build '2' on profitbricks-build2-i386.debian.net. Fri May 29 13:10:34 UTC 2020 I: Deleting $TMPDIR on profitbricks-build2-i386.debian.net. Fri May 29 13:10:34 UTC 2020 I: nullmailer_2.2-3_i386.changes: Format: 1.8 Date: Tue, 25 Dec 2018 08:25:38 +0900 Source: nullmailer Binary: nullmailer nullmailer-dbgsym Architecture: i386 Version: 1:2.2-3 Distribution: unstable Urgency: medium Maintainer: David Bremner Changed-By: David Bremner Description: nullmailer - simple relay-only mail transport agent Closes: 917197 Changes: nullmailer (1:2.2-3) unstable; urgency=medium . * disable all smtp-auth tests. There is a second race condition that I can't figure out at the moment (Closes: #917197). Checksums-Sha1: fb62650005349dea9e21e2e4a076d64fea820987 657436 nullmailer-dbgsym_2.2-3_i386.deb a45ea33fe4ce2c283f1e75ca1a596b0778d68981 5217 nullmailer_2.2-3_i386.buildinfo 8f80e17089c33d0086ef0c2059d374ab7acc1848 116228 nullmailer_2.2-3_i386.deb Checksums-Sha256: 5ca3e397e4837715316c55d3faded44cbf22cbf0e1f13421ff8f19aab61d8f32 657436 nullmailer-dbgsym_2.2-3_i386.deb d9eafecda03544191e6cb234fa197cdf8bc5a4f784e52b344bfcf07c27667692 5217 nullmailer_2.2-3_i386.buildinfo 6662e1fafba75bc4c1c3c11a35b4045ad0b28f2176fc9f9775a1f9f1d4a10bc7 116228 nullmailer_2.2-3_i386.deb Files: 8a5c104f8b48acceabe55a39c84aeec0 657436 debug optional nullmailer-dbgsym_2.2-3_i386.deb 9e5d6fd2dfadc880dd5a680bd44c7d67 5217 mail optional nullmailer_2.2-3_i386.buildinfo 0ca5ca51bb2ab9d48e873e58d9cd74df 116228 mail optional nullmailer_2.2-3_i386.deb Fri May 29 13:10:37 UTC 2020 I: diffoscope 145 will be used to compare the two builds: # Profiling output for: /usr/bin/diffoscope --html /srv/reproducible-results/rbuild-debian/tmp.uAcaX7D5SQ/nullmailer_2.2-3.diffoscope.html --text /srv/reproducible-results/rbuild-debian/tmp.uAcaX7D5SQ/nullmailer_2.2-3.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/tmp.uAcaX7D5SQ/nullmailer_2.2-3.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/tmp.uAcaX7D5SQ/b1/nullmailer_2.2-3_i386.changes /srv/reproducible-results/rbuild-debian/tmp.uAcaX7D5SQ/b2/nullmailer_2.2-3_i386.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.219s) 0.219s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.026s) 0.026s 10 calls diffoscope.comparators.binary.FilesystemFile Fri May 29 13:10:41 UTC 2020 I: diffoscope 145 found no differences in the changes files, and a .buildinfo file also exists. Fri May 29 13:10:41 UTC 2020 I: nullmailer from buster built successfully and reproducibly on i386. Fri May 29 13:10:42 UTC 2020 I: Submitting .buildinfo files to external archives: Fri May 29 13:10:42 UTC 2020 I: Submitting 8.0K b1/nullmailer_2.2-3_i386.buildinfo.asc Fri May 29 13:10:45 UTC 2020 I: Submitting 8.0K b2/nullmailer_2.2-3_i386.buildinfo.asc Fri May 29 13:10:46 UTC 2020 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Fri May 29 13:10:46 UTC 2020 I: Done submitting .buildinfo files. Fri May 29 13:10:46 UTC 2020 I: Removing signed nullmailer_2.2-3_i386.buildinfo.asc files: removed './b1/nullmailer_2.2-3_i386.buildinfo.asc' removed './b2/nullmailer_2.2-3_i386.buildinfo.asc'