Wed Feb 26 09:20:50 UTC 2020 I: starting to build libgd-graph3d-perl/buster/i386 on jenkins on '2020-02-26 09:20' Wed Feb 26 09:20:50 UTC 2020 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/i386_3/1109/console.log Wed Feb 26 09:20:50 UTC 2020 I: Downloading source for buster/libgd-graph3d-perl=0.63-9 --2020-02-26 09:20:50-- http://deb.debian.org/debian/pool/main/libg/libgd-graph3d-perl/libgd-graph3d-perl_0.63-9.dsc Connecting to 78.137.99.97:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2299 (2.2K) Saving to: ‘libgd-graph3d-perl_0.63-9.dsc’ 0K .. 100% 231K=0.01s 2020-02-26 09:20:50 (231 KB/s) - ‘libgd-graph3d-perl_0.63-9.dsc’ saved [2299/2299] Wed Feb 26 09:20:50 UTC 2020 I: libgd-graph3d-perl_0.63-9.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: libgd-graph3d-perl Binary: libgd-graph3d-perl Architecture: all Version: 0.63-9 Maintainer: Debian Perl Group Uploaders: Jonas Smedegaard Homepage: http://search.cpan.org/dist/GD-Graph3d/ Standards-Version: 3.9.5 Vcs-Browser: http://anonscm.debian.org/?p=pkg-perl/packages/libgd-graph3d-perl.git Vcs-Git: git://anonscm.debian.org/pkg-perl/packages/libgd-graph3d-perl Build-Depends: cdbs, devscripts, perl, debhelper, dh-buildinfo, libgd-graph-perl, libgd-perl | libgd-gd2-noxpm-perl | libgd-gd2-perl, libregexp-assemble-perl, libimage-exiftool-perl, libfont-ttf-perl Package-List: libgd-graph3d-perl deb perl extra arch=all Checksums-Sha1: 4f502b6fb0f32f6447970e7fa15cdf156b3d508a 97855 libgd-graph3d-perl_0.63.orig.tar.gz 10d402cfcb7e812f1ec2987266b69099f12e03cd 7632 libgd-graph3d-perl_0.63-9.debian.tar.xz Checksums-Sha256: d1784461b86f00f564d29c4926e409a0a2ed087e6154f7a14341d53c3bb55259 97855 libgd-graph3d-perl_0.63.orig.tar.gz d6141469e00ca5679ec2b82e304d5fb68407c68e9c033510051b9d828b9e2efb 7632 libgd-graph3d-perl_0.63-9.debian.tar.xz Files: f866dcdd1e7e2056bb946ab7ac3fe37b 97855 libgd-graph3d-perl_0.63.orig.tar.gz 288e6386803e92ac3d30c6238a3ea626 7632 libgd-graph3d-perl_0.63-9.debian.tar.xz -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQJ8BAEBCgBmBQJTnCYnXxSAAAAAAC4AKGlzc3Vlci1mcHJAbm90YXRpb25zLm9w ZW5wZ3AuZmlmdGhob3JzZW1hbi5uZXQ5RkUzRTlDMzY2OTFBNjlGRjUzQ0M2ODQy QzdDMzE0NkMxQTAwMTIxAAoJECx8MUbBoAEhPeoP/3u0BcdLNepnQQPRXCK617fh 8HICSxhEf1hIKgBPTX7Ii0AHWp6PbBVSg3Bxgwa3NJl6DXS5TaZvH7ese74psigO lrYqA0JVXs4mwd8qpGNyHcGVs6F02JSo4+NYxHr1RepTseW56M6hDBDy4PXxmEia Wl6xONaHunREitVt+Ok6YeNqeJkqiwMOxctrDYxcm33N4Yfsqpi/QzYSyxuLMtW7 gKsjjSOYXpQs1A9G8ZzzMjqThKu4FsjM2Lg5kjzAX5xADfqbHdkA4hJ7D+Jodw8Q 2cpWecwpv7+EvmpI26v+tCMIUXJSsRrwvPPpnQOfxrFV2JsSirWm01EKFBVrk/5m mX2X8HHPfKaBLd/YsLO476nMVqxPD3pCq5giDt4yeFVU5rdrLegMjvsluXR+hJBB /SNHBZVbb+3X+pSPj7ni59j20bsGK2nlhd9U/ZaYAWRQJ+3WOlDnlM5yZJtuVW5S RCqrAgACPy6XFZAdyYfmvvAPeqAhJfLGpVPbp+Tz8dUQwVyT+12y5jMR6xOPAb2G coT66jGE3orbvFzOsXa8F/uLqUBETMoeUjt6n6JOKqHnQsGxI0n0pmV0qvb2xIey Kfc4uPKEDa0CM2OvYYq9dM/MHGxKJdbzLMIJg4knJp1ZFuxpWJyk1se20OjIedM5 gTwPzHYugYAQfgC+wxN4 =4VvU -----END PGP SIGNATURE----- Wed Feb 26 09:20:50 UTC 2020 I: Checking whether the package is not for us Wed Feb 26 09:20:50 UTC 2020 I: Starting 1st build on remote node profitbricks-build2-i386.debian.net. Wed Feb 26 09:20:50 UTC 2020 I: Preparing to do remote build '1' on profitbricks-build2-i386.debian.net. Wed Feb 26 09:26:08 UTC 2020 I: Deleting $TMPDIR on profitbricks-build2-i386.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Tue Feb 25 21:20:52 -12 2020 I: pbuilder-time-stamp: 1582708852 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/buster-reproducible-base.tgz] I: copying local configuration I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: using eatmydata during job I: Copying source file I: copying [libgd-graph3d-perl_0.63-9.dsc] I: copying [./libgd-graph3d-perl_0.63.orig.tar.gz] I: copying [./libgd-graph3d-perl_0.63-9.debian.tar.xz] I: Extracting source gpgv: unknown type of key resource 'trustedkeys.kbx' gpgv: keyblock resource '/root/.gnupg/trustedkeys.kbx': General error gpgv: Signature made Fri Jun 13 22:38:31 2014 -12 gpgv: using RSA key 2C7C3146C1A00121 gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./libgd-graph3d-perl_0.63-9.dsc dpkg-source: info: extracting libgd-graph3d-perl in libgd-graph3d-perl-0.63 dpkg-source: info: unpacking libgd-graph3d-perl_0.63.orig.tar.gz dpkg-source: info: unpacking libgd-graph3d-perl_0.63-9.debian.tar.xz I: using fakeroot in build. I: Installing the build-deps -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: i386 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: cdbs, devscripts, perl, debhelper, dh-buildinfo, libgd-graph-perl, libgd-perl | libgd-gd2-noxpm-perl | libgd-gd2-perl, libregexp-assemble-perl, libimage-exiftool-perl, libfont-ttf-perl dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19231 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on cdbs; however: Package cdbs is not installed. pbuilder-satisfydepends-dummy depends on devscripts; however: Package devscripts is not installed. pbuilder-satisfydepends-dummy depends on debhelper; however: Package debhelper is not installed. pbuilder-satisfydepends-dummy depends on dh-buildinfo; however: Package dh-buildinfo is not installed. pbuilder-satisfydepends-dummy depends on libgd-graph-perl; however: Package libgd-graph-perl is not installed. pbuilder-satisfydepends-dummy depends on libgd-perl | libgd-gd2-noxpm-perl | libgd-gd2-perl; however: Package libgd-perl is not installed. Package libgd-gd2-noxpm-perl is not installed. Package libgd-gd2-perl is not installed. pbuilder-satisfydepends-dummy depends on libregexp-assemble-perl; however: Package libregexp-assemble-perl is not installed. pbuilder-satisfydepends-dummy depends on libimage-exiftool-perl; however: Package libimage-exiftool-perl is not installed. pbuilder-satisfydepends-dummy depends on libfont-ttf-perl; however: Package libfont-ttf-perl is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdmainutils{a} ca-certificates{a} cdbs{a} debhelper{a} devscripts{a} dh-autoreconf{a} dh-buildinfo{a} dh-strip-nondeterminism{a} dirmngr{a} dwz{a} file{a} fontconfig-config{a} fonts-dejavu-core{a} gettext{a} gettext-base{a} gnupg{a} gnupg-l10n{a} gnupg-utils{a} gpg{a} gpg-agent{a} gpg-wks-client{a} gpg-wks-server{a} gpgconf{a} gpgsm{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libassuan0{a} libb-hooks-op-check-perl{a} libbsd0{a} libclass-method-modifiers-perl{a} libcroco3{a} libdevel-callchecker-perl{a} libdevel-globaldestruction-perl{a} libdynaloader-functions-perl{a} libelf1{a} libencode-locale-perl{a} libexpat1{a} libfile-homedir-perl{a} libfile-listing-perl{a} libfile-stripnondeterminism-perl{a} libfile-which-perl{a} libfont-ttf-perl{a} libfontconfig1{a} libfreetype6{a} libgd-graph-perl{a} libgd-perl{a} libgd-text-perl{a} libgd3{a} libglib2.0-0{a} libhtml-parser-perl{a} libhtml-tagset-perl{a} libhtml-tree-perl{a} libhttp-cookies-perl{a} libhttp-date-perl{a} libhttp-message-perl{a} libhttp-negotiate-perl{a} libicu63{a} libimage-exiftool-perl{a} libimport-into-perl{a} libio-html-perl{a} libio-pty-perl{a} libio-socket-ssl-perl{a} libio-string-perl{a} libipc-run-perl{a} libjbig0{a} libjpeg62-turbo{a} libksba8{a} libldap-2.4-2{a} libldap-common{a} liblwp-mediatypes-perl{a} liblwp-protocol-https-perl{a} libmagic-mgc{a} libmagic1{a} libmodule-runtime-perl{a} libmoo-perl{a} libmpdec2{a} libncurses6{a} libnet-http-perl{a} libnet-ssleay-perl{a} libnpth0{a} libparams-classify-perl{a} libpipeline1{a} libpng16-16{a} libpython3-stdlib{a} libpython3.7-minimal{a} libpython3.7-stdlib{a} libreadline7{a} libregexp-assemble-perl{a} librole-tiny-perl{a} libsasl2-2{a} libsasl2-modules-db{a} libsigsegv2{a} libssl1.1{a} libstrictures-perl{a} libsub-exporter-progressive-perl{a} libsub-quote-perl{a} libtiff5{a} libtimedate-perl{a} libtool{a} libtry-tiny-perl{a} libuchardet0{a} liburi-perl{a} libwebp6{a} libwww-perl{a} libwww-robotrules-perl{a} libx11-6{a} libx11-data{a} libxau6{a} libxcb1{a} libxdmcp6{a} libxml2{a} libxpm4{a} lsb-base{a} m4{a} man-db{a} mime-support{a} netbase{a} openssl{a} patchutils{a} perl-openssl-defaults{a} pinentry-curses{a} po-debconf{a} python3{a} python3-minimal{a} python3.7{a} python3.7-minimal{a} readline-common{a} sensible-utils{a} ucf{a} wdiff{a} The following packages are RECOMMENDED but will NOT be installed: at curl dctrl-tools debian-keyring dput dput-ng dupload equivs libarchive-cpio-perl libclass-xsaccessor-perl libdata-dump-perl libdistro-info-perl libgit-wrapper-perl libgitlab-api-v4-perl libglib2.0-data libgpm2 libhtml-form-perl libhtml-format-perl libhttp-daemon-perl liblist-compare-perl libltdl-dev libmail-sendmail-perl libmailtools-perl libposix-strptime-perl libsasl2-modules libsoap-lite-perl libstring-shellquote-perl libsub-name-perl libunicode-linebreak-perl licensecheck lintian lynx python3-apt python3-debian python3-magic python3-requests python3-unidiff python3-xdg shared-mime-info strace unzip wget xdg-user-dirs 0 packages upgraded, 135 newly installed, 0 to remove and 0 not upgraded. Need to get 46.7 MB of archives. After unpacking 161 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian buster/main i386 libbsd0 i386 0.9.1-2 [104 kB] Get: 2 http://deb.debian.org/debian buster/main i386 bsdmainutils i386 11.1.2+b1 [193 kB] Get: 3 http://deb.debian.org/debian buster/main i386 libuchardet0 i386 0.0.6-3 [65.2 kB] Get: 4 http://deb.debian.org/debian buster/main i386 groff-base i386 1.22.4-3 [935 kB] Get: 5 http://deb.debian.org/debian buster/main i386 libpipeline1 i386 1.5.1-2 [33.3 kB] Get: 6 http://deb.debian.org/debian buster/main i386 man-db i386 2.8.5-2 [1284 kB] Get: 7 http://deb.debian.org/debian buster/main i386 libssl1.1 i386 1.1.1d-0+deb10u2 [1538 kB] Get: 8 http://deb.debian.org/debian buster/main i386 libpython3.7-minimal i386 3.7.3-2+deb10u1 [590 kB] Get: 9 http://deb.debian.org/debian buster/main i386 libexpat1 i386 2.2.6-2+deb10u1 [104 kB] Get: 10 http://deb.debian.org/debian buster/main i386 python3.7-minimal i386 3.7.3-2+deb10u1 [1745 kB] Get: 11 http://deb.debian.org/debian buster/main i386 python3-minimal i386 3.7.3-1 [36.6 kB] Get: 12 http://deb.debian.org/debian buster/main i386 mime-support all 3.62 [37.2 kB] Get: 13 http://deb.debian.org/debian buster/main i386 libmpdec2 i386 2.4.2-2 [83.2 kB] Get: 14 http://deb.debian.org/debian buster/main i386 readline-common all 7.0-5 [70.6 kB] Get: 15 http://deb.debian.org/debian buster/main i386 libreadline7 i386 7.0-5 [156 kB] Get: 16 http://deb.debian.org/debian buster/main i386 libpython3.7-stdlib i386 3.7.3-2+deb10u1 [1750 kB] Get: 17 http://deb.debian.org/debian buster/main i386 python3.7 i386 3.7.3-2+deb10u1 [330 kB] Get: 18 http://deb.debian.org/debian buster/main i386 libpython3-stdlib i386 3.7.3-1 [20.0 kB] Get: 19 http://deb.debian.org/debian buster/main i386 python3 i386 3.7.3-1 [61.5 kB] Get: 20 http://deb.debian.org/debian buster/main i386 netbase all 5.6 [19.4 kB] Get: 21 http://deb.debian.org/debian buster/main i386 sensible-utils all 0.0.12 [15.8 kB] Get: 22 http://deb.debian.org/debian buster/main i386 libmagic-mgc i386 1:5.35-4+deb10u1 [242 kB] Get: 23 http://deb.debian.org/debian buster/main i386 libmagic1 i386 1:5.35-4+deb10u1 [124 kB] Get: 24 http://deb.debian.org/debian buster/main i386 file i386 1:5.35-4+deb10u1 [66.3 kB] Get: 25 http://deb.debian.org/debian buster/main i386 gettext-base i386 0.19.8.1-9 [124 kB] Get: 26 http://deb.debian.org/debian buster/main i386 ucf all 3.0038+nmu1 [69.0 kB] Get: 27 http://deb.debian.org/debian buster/main i386 libsigsegv2 i386 2.12-2 [33.2 kB] Get: 28 http://deb.debian.org/debian buster/main i386 m4 i386 1.4.18-2 [205 kB] Get: 29 http://deb.debian.org/debian buster/main i386 autoconf all 2.69-11 [341 kB] Get: 30 http://deb.debian.org/debian buster/main i386 autotools-dev all 20180224.1 [77.0 kB] Get: 31 http://deb.debian.org/debian buster/main i386 automake all 1:1.16.1-4 [771 kB] Get: 32 http://deb.debian.org/debian buster/main i386 autopoint all 0.19.8.1-9 [434 kB] Get: 33 http://deb.debian.org/debian buster/main i386 openssl i386 1.1.1d-0+deb10u2 [853 kB] Get: 34 http://deb.debian.org/debian buster/main i386 ca-certificates all 20190110 [157 kB] Get: 35 http://deb.debian.org/debian buster/main i386 cdbs all 0.4.159 [83.7 kB] Get: 36 http://deb.debian.org/debian buster/main i386 libtool all 2.4.6-9 [547 kB] Get: 37 http://deb.debian.org/debian buster/main i386 dh-autoreconf all 19 [16.9 kB] Get: 38 http://deb.debian.org/debian buster/main i386 libarchive-zip-perl all 1.64-1 [96.8 kB] Get: 39 http://deb.debian.org/debian buster/main i386 libfile-stripnondeterminism-perl all 1.1.2-1 [19.8 kB] Get: 40 http://deb.debian.org/debian buster/main i386 dh-strip-nondeterminism all 1.1.2-1 [13.0 kB] Get: 41 http://deb.debian.org/debian buster/main i386 libelf1 i386 0.176-1.1 [166 kB] Get: 42 http://deb.debian.org/debian buster/main i386 dwz i386 0.12-3 [81.4 kB] Get: 43 http://deb.debian.org/debian buster/main i386 libglib2.0-0 i386 2.58.3-2+deb10u2 [1334 kB] Get: 44 http://deb.debian.org/debian buster/main i386 libicu63 i386 63.1-6 [8443 kB] Get: 45 http://deb.debian.org/debian buster/main i386 libxml2 i386 2.9.4+dfsg1-7+b3 [721 kB] Get: 46 http://deb.debian.org/debian buster/main i386 libcroco3 i386 0.6.12-3 [151 kB] Get: 47 http://deb.debian.org/debian buster/main i386 libncurses6 i386 6.1+20181013-2+deb10u2 [109 kB] Get: 48 http://deb.debian.org/debian buster/main i386 gettext i386 0.19.8.1-9 [1314 kB] Get: 49 http://deb.debian.org/debian buster/main i386 intltool-debian all 0.35.0+20060710.5 [26.8 kB] Get: 50 http://deb.debian.org/debian buster/main i386 po-debconf all 1.0.21 [248 kB] Get: 51 http://deb.debian.org/debian buster/main i386 debhelper all 12.1.1 [1016 kB] Get: 52 http://deb.debian.org/debian buster/main i386 libassuan0 i386 2.5.2-1 [51.5 kB] Get: 53 http://deb.debian.org/debian buster/main i386 gpgconf i386 2.2.12-1+deb10u1 [517 kB] Get: 54 http://deb.debian.org/debian buster/main i386 lsb-base all 10.2019051400 [28.4 kB] Get: 55 http://deb.debian.org/debian buster/main i386 libksba8 i386 1.3.5-2 [107 kB] Get: 56 http://deb.debian.org/debian buster/main i386 libsasl2-modules-db i386 2.1.27+dfsg-1+deb10u1 [70.1 kB] Get: 57 http://deb.debian.org/debian buster/main i386 libsasl2-2 i386 2.1.27+dfsg-1+deb10u1 [110 kB] Get: 58 http://deb.debian.org/debian buster/main i386 libldap-common all 2.4.47+dfsg-3+deb10u1 [89.6 kB] Get: 59 http://deb.debian.org/debian buster/main i386 libldap-2.4-2 i386 2.4.47+dfsg-3+deb10u1 [236 kB] Get: 60 http://deb.debian.org/debian buster/main i386 libnpth0 i386 1.6-1 [18.7 kB] Get: 61 http://deb.debian.org/debian buster/main i386 dirmngr i386 2.2.12-1+deb10u1 [738 kB] Get: 62 http://deb.debian.org/debian buster/main i386 gnupg-l10n all 2.2.12-1+deb10u1 [1010 kB] Get: 63 http://deb.debian.org/debian buster/main i386 gnupg-utils i386 2.2.12-1+deb10u1 [908 kB] Get: 64 http://deb.debian.org/debian buster/main i386 gpg i386 2.2.12-1+deb10u1 [905 kB] Get: 65 http://deb.debian.org/debian buster/main i386 pinentry-curses i386 1.1.0-2 [66.3 kB] Get: 66 http://deb.debian.org/debian buster/main i386 gpg-agent i386 2.2.12-1+deb10u1 [636 kB] Get: 67 http://deb.debian.org/debian buster/main i386 gpg-wks-client i386 2.2.12-1+deb10u1 [496 kB] Get: 68 http://deb.debian.org/debian buster/main i386 gpg-wks-server i386 2.2.12-1+deb10u1 [487 kB] Get: 69 http://deb.debian.org/debian buster/main i386 gpgsm i386 2.2.12-1+deb10u1 [624 kB] Get: 70 http://deb.debian.org/debian buster/main i386 gnupg all 2.2.12-1+deb10u1 [715 kB] Get: 71 http://deb.debian.org/debian buster/main i386 libfile-which-perl all 1.23-1 [16.6 kB] Get: 72 http://deb.debian.org/debian buster/main i386 libfile-homedir-perl all 1.004-1 [42.7 kB] Get: 73 http://deb.debian.org/debian buster/main i386 libio-pty-perl i386 1:1.08-1.1+b5 [34.4 kB] Get: 74 http://deb.debian.org/debian buster/main i386 libipc-run-perl all 20180523.0-1 [101 kB] Get: 75 http://deb.debian.org/debian buster/main i386 libclass-method-modifiers-perl all 2.12-1 [18.6 kB] Get: 76 http://deb.debian.org/debian buster/main i386 libsub-exporter-progressive-perl all 0.001013-1 [7588 B] Get: 77 http://deb.debian.org/debian buster/main i386 libdevel-globaldestruction-perl all 0.14-1 [8084 B] Get: 78 http://deb.debian.org/debian buster/main i386 libb-hooks-op-check-perl i386 0.22-1+b1 [11.5 kB] Get: 79 http://deb.debian.org/debian buster/main i386 libdynaloader-functions-perl all 0.003-1 [12.6 kB] Get: 80 http://deb.debian.org/debian buster/main i386 libdevel-callchecker-perl i386 0.008-1 [15.7 kB] Get: 81 http://deb.debian.org/debian buster/main i386 libparams-classify-perl i386 0.015-1+b1 [26.1 kB] Get: 82 http://deb.debian.org/debian buster/main i386 libmodule-runtime-perl all 0.016-1 [19.4 kB] Get: 83 http://deb.debian.org/debian buster/main i386 libimport-into-perl all 1.002005-1 [11.6 kB] Get: 84 http://deb.debian.org/debian buster/main i386 librole-tiny-perl all 2.000006-1 [19.4 kB] Get: 85 http://deb.debian.org/debian buster/main i386 libstrictures-perl all 2.000005-1 [18.3 kB] Get: 86 http://deb.debian.org/debian buster/main i386 libsub-quote-perl all 2.005001-1 [17.9 kB] Get: 87 http://deb.debian.org/debian buster/main i386 libmoo-perl all 2.003004-2 [57.4 kB] Get: 88 http://deb.debian.org/debian buster/main i386 libencode-locale-perl all 1.05-1 [13.7 kB] Get: 89 http://deb.debian.org/debian buster/main i386 libtimedate-perl all 2.3000-2+deb10u1 [38.1 kB] Get: 90 http://deb.debian.org/debian buster/main i386 libhttp-date-perl all 6.02-1 [10.7 kB] Get: 91 http://deb.debian.org/debian buster/main i386 libfile-listing-perl all 6.04-1 [10.3 kB] Get: 92 http://deb.debian.org/debian buster/main i386 libhtml-tagset-perl all 3.20-3 [12.7 kB] Get: 93 http://deb.debian.org/debian buster/main i386 liburi-perl all 1.76-1 [89.9 kB] Get: 94 http://deb.debian.org/debian buster/main i386 libhtml-parser-perl i386 3.72-3+b3 [106 kB] Get: 95 http://deb.debian.org/debian buster/main i386 libhtml-tree-perl all 5.07-2 [213 kB] Get: 96 http://deb.debian.org/debian buster/main i386 libio-html-perl all 1.001-1 [17.6 kB] Get: 97 http://deb.debian.org/debian buster/main i386 liblwp-mediatypes-perl all 6.02-1 [22.1 kB] Get: 98 http://deb.debian.org/debian buster/main i386 libhttp-message-perl all 6.18-1 [77.8 kB] Get: 99 http://deb.debian.org/debian buster/main i386 libhttp-cookies-perl all 6.04-1 [17.8 kB] Get: 100 http://deb.debian.org/debian buster/main i386 libhttp-negotiate-perl all 6.01-1 [12.8 kB] Get: 101 http://deb.debian.org/debian buster/main i386 perl-openssl-defaults i386 3 [6782 B] Get: 102 http://deb.debian.org/debian buster/main i386 libnet-ssleay-perl i386 1.85-2+b1 [314 kB] Get: 103 http://deb.debian.org/debian buster/main i386 libio-socket-ssl-perl all 2.060-3 [207 kB] Get: 104 http://deb.debian.org/debian buster/main i386 libnet-http-perl all 6.18-1 [24.5 kB] Get: 105 http://deb.debian.org/debian buster/main i386 liblwp-protocol-https-perl all 6.07-2 [9242 B] Get: 106 http://deb.debian.org/debian buster/main i386 libtry-tiny-perl all 0.30-1 [23.3 kB] Get: 107 http://deb.debian.org/debian buster/main i386 libwww-robotrules-perl all 6.02-1 [12.9 kB] Get: 108 http://deb.debian.org/debian buster/main i386 libwww-perl all 6.36-2 [188 kB] Get: 109 http://deb.debian.org/debian buster/main i386 patchutils i386 0.3.4-2 [92.4 kB] Get: 110 http://deb.debian.org/debian buster/main i386 wdiff i386 1.2.2-2+b1 [123 kB] Get: 111 http://deb.debian.org/debian buster/main i386 devscripts i386 2.19.5+deb10u1 [1046 kB] Get: 112 http://deb.debian.org/debian buster/main i386 dh-buildinfo all 0.11+nmu2 [18.4 kB] Get: 113 http://deb.debian.org/debian buster/main i386 fonts-dejavu-core all 2.37-1 [1068 kB] Get: 114 http://deb.debian.org/debian buster/main i386 fontconfig-config all 2.13.1-2 [280 kB] Get: 115 http://deb.debian.org/debian buster/main i386 libio-string-perl all 1.08-3 [12.3 kB] Get: 116 http://deb.debian.org/debian buster/main i386 libfont-ttf-perl all 1.06-1 [317 kB] Get: 117 http://deb.debian.org/debian buster/main i386 libpng16-16 i386 1.6.36-6 [301 kB] Get: 118 http://deb.debian.org/debian buster/main i386 libfreetype6 i386 2.9.1-3+deb10u1 [395 kB] Get: 119 http://deb.debian.org/debian buster/main i386 libfontconfig1 i386 2.13.1-2 [357 kB] Get: 120 http://deb.debian.org/debian buster/main i386 libjpeg62-turbo i386 1:1.5.2-2+b1 [142 kB] Get: 121 http://deb.debian.org/debian buster/main i386 libjbig0 i386 2.1-3.1+b2 [31.5 kB] Get: 122 http://deb.debian.org/debian buster/main i386 libwebp6 i386 0.6.1-2 [275 kB] Get: 123 http://deb.debian.org/debian buster/main i386 libtiff5 i386 4.1.0+git191117-2~deb10u1 [284 kB] Get: 124 http://deb.debian.org/debian buster/main i386 libxau6 i386 1:1.0.8-1+b2 [20.3 kB] Get: 125 http://deb.debian.org/debian buster/main i386 libxdmcp6 i386 1:1.1.2-3 [26.7 kB] Get: 126 http://deb.debian.org/debian buster/main i386 libxcb1 i386 1.13.1-2 [141 kB] Get: 127 http://deb.debian.org/debian buster/main i386 libx11-data all 2:1.6.7-1 [298 kB] Get: 128 http://deb.debian.org/debian buster/main i386 libx11-6 i386 2:1.6.7-1 [778 kB] Get: 129 http://deb.debian.org/debian buster/main i386 libxpm4 i386 1:3.5.12-1 [50.9 kB] Get: 130 http://deb.debian.org/debian buster/main i386 libgd3 i386 2.2.5-5.2 [141 kB] Get: 131 http://deb.debian.org/debian buster/main i386 libgd-perl i386 2.71-2 [143 kB] Get: 132 http://deb.debian.org/debian buster/main i386 libgd-text-perl all 0.86-9 [41.4 kB] Get: 133 http://deb.debian.org/debian buster/main i386 libgd-graph-perl all 1.54~ds-2 [125 kB] Get: 134 http://deb.debian.org/debian buster/main i386 libimage-exiftool-perl all 11.16-1 [3354 kB] Get: 135 http://deb.debian.org/debian buster/main i386 libregexp-assemble-perl all 0.36-1 [86.6 kB] Fetched 46.7 MB in 11s (4317 kB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package libbsd0:i386. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19231 files and directories currently installed.) Preparing to unpack .../0-libbsd0_0.9.1-2_i386.deb ... Unpacking libbsd0:i386 (0.9.1-2) ... Selecting previously unselected package bsdmainutils. Preparing to unpack .../1-bsdmainutils_11.1.2+b1_i386.deb ... Unpacking bsdmainutils (11.1.2+b1) ... Selecting previously unselected package libuchardet0:i386. Preparing to unpack .../2-libuchardet0_0.0.6-3_i386.deb ... Unpacking libuchardet0:i386 (0.0.6-3) ... Selecting previously unselected package groff-base. Preparing to unpack .../3-groff-base_1.22.4-3_i386.deb ... Unpacking groff-base (1.22.4-3) ... Selecting previously unselected package libpipeline1:i386. Preparing to unpack .../4-libpipeline1_1.5.1-2_i386.deb ... Unpacking libpipeline1:i386 (1.5.1-2) ... Selecting previously unselected package man-db. Preparing to unpack .../5-man-db_2.8.5-2_i386.deb ... Unpacking man-db (2.8.5-2) ... Selecting previously unselected package libssl1.1:i386. Preparing to unpack .../6-libssl1.1_1.1.1d-0+deb10u2_i386.deb ... Unpacking libssl1.1:i386 (1.1.1d-0+deb10u2) ... Selecting previously unselected package libpython3.7-minimal:i386. Preparing to unpack .../7-libpython3.7-minimal_3.7.3-2+deb10u1_i386.deb ... Unpacking libpython3.7-minimal:i386 (3.7.3-2+deb10u1) ... Selecting previously unselected package libexpat1:i386. Preparing to unpack .../8-libexpat1_2.2.6-2+deb10u1_i386.deb ... Unpacking libexpat1:i386 (2.2.6-2+deb10u1) ... Selecting previously unselected package python3.7-minimal. Preparing to unpack .../9-python3.7-minimal_3.7.3-2+deb10u1_i386.deb ... Unpacking python3.7-minimal (3.7.3-2+deb10u1) ... Setting up libssl1.1:i386 (1.1.1d-0+deb10u2) ... Setting up libpython3.7-minimal:i386 (3.7.3-2+deb10u1) ... Setting up libexpat1:i386 (2.2.6-2+deb10u1) ... Setting up python3.7-minimal (3.7.3-2+deb10u1) ... Selecting previously unselected package python3-minimal. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20126 files and directories currently installed.) Preparing to unpack .../0-python3-minimal_3.7.3-1_i386.deb ... Unpacking python3-minimal (3.7.3-1) ... Selecting previously unselected package mime-support. Preparing to unpack .../1-mime-support_3.62_all.deb ... Unpacking mime-support (3.62) ... Selecting previously unselected package libmpdec2:i386. Preparing to unpack .../2-libmpdec2_2.4.2-2_i386.deb ... Unpacking libmpdec2:i386 (2.4.2-2) ... Selecting previously unselected package readline-common. Preparing to unpack .../3-readline-common_7.0-5_all.deb ... Unpacking readline-common (7.0-5) ... Selecting previously unselected package libreadline7:i386. Preparing to unpack .../4-libreadline7_7.0-5_i386.deb ... Unpacking libreadline7:i386 (7.0-5) ... Selecting previously unselected package libpython3.7-stdlib:i386. Preparing to unpack .../5-libpython3.7-stdlib_3.7.3-2+deb10u1_i386.deb ... Unpacking libpython3.7-stdlib:i386 (3.7.3-2+deb10u1) ... Selecting previously unselected package python3.7. Preparing to unpack .../6-python3.7_3.7.3-2+deb10u1_i386.deb ... Unpacking python3.7 (3.7.3-2+deb10u1) ... Selecting previously unselected package libpython3-stdlib:i386. Preparing to unpack .../7-libpython3-stdlib_3.7.3-1_i386.deb ... Unpacking libpython3-stdlib:i386 (3.7.3-1) ... Setting up python3-minimal (3.7.3-1) ... Selecting previously unselected package python3. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20587 files and directories currently installed.) Preparing to unpack .../000-python3_3.7.3-1_i386.deb ... Unpacking python3 (3.7.3-1) ... Selecting previously unselected package netbase. Preparing to unpack .../001-netbase_5.6_all.deb ... Unpacking netbase (5.6) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../002-sensible-utils_0.0.12_all.deb ... Unpacking sensible-utils (0.0.12) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../003-libmagic-mgc_1%3a5.35-4+deb10u1_i386.deb ... Unpacking libmagic-mgc (1:5.35-4+deb10u1) ... Selecting previously unselected package libmagic1:i386. Preparing to unpack .../004-libmagic1_1%3a5.35-4+deb10u1_i386.deb ... Unpacking libmagic1:i386 (1:5.35-4+deb10u1) ... Selecting previously unselected package file. Preparing to unpack .../005-file_1%3a5.35-4+deb10u1_i386.deb ... Unpacking file (1:5.35-4+deb10u1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../006-gettext-base_0.19.8.1-9_i386.deb ... Unpacking gettext-base (0.19.8.1-9) ... Selecting previously unselected package ucf. Preparing to unpack .../007-ucf_3.0038+nmu1_all.deb ... Moving old data out of the way Unpacking ucf (3.0038+nmu1) ... Selecting previously unselected package libsigsegv2:i386. Preparing to unpack .../008-libsigsegv2_2.12-2_i386.deb ... Unpacking libsigsegv2:i386 (2.12-2) ... Selecting previously unselected package m4. Preparing to unpack .../009-m4_1.4.18-2_i386.deb ... Unpacking m4 (1.4.18-2) ... Selecting previously unselected package autoconf. Preparing to unpack .../010-autoconf_2.69-11_all.deb ... Unpacking autoconf (2.69-11) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../011-autotools-dev_20180224.1_all.deb ... Unpacking autotools-dev (20180224.1) ... Selecting previously unselected package automake. Preparing to unpack .../012-automake_1%3a1.16.1-4_all.deb ... Unpacking automake (1:1.16.1-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../013-autopoint_0.19.8.1-9_all.deb ... Unpacking autopoint (0.19.8.1-9) ... Selecting previously unselected package openssl. Preparing to unpack .../014-openssl_1.1.1d-0+deb10u2_i386.deb ... Unpacking openssl (1.1.1d-0+deb10u2) ... Selecting previously unselected package ca-certificates. Preparing to unpack .../015-ca-certificates_20190110_all.deb ... Unpacking ca-certificates (20190110) ... Selecting previously unselected package cdbs. Preparing to unpack .../016-cdbs_0.4.159_all.deb ... Unpacking cdbs (0.4.159) ... Selecting previously unselected package libtool. Preparing to unpack .../017-libtool_2.4.6-9_all.deb ... Unpacking libtool (2.4.6-9) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../018-dh-autoreconf_19_all.deb ... Unpacking dh-autoreconf (19) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../019-libarchive-zip-perl_1.64-1_all.deb ... Unpacking libarchive-zip-perl (1.64-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../020-libfile-stripnondeterminism-perl_1.1.2-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.1.2-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../021-dh-strip-nondeterminism_1.1.2-1_all.deb ... Unpacking dh-strip-nondeterminism (1.1.2-1) ... Selecting previously unselected package libelf1:i386. Preparing to unpack .../022-libelf1_0.176-1.1_i386.deb ... Unpacking libelf1:i386 (0.176-1.1) ... Selecting previously unselected package dwz. Preparing to unpack .../023-dwz_0.12-3_i386.deb ... Unpacking dwz (0.12-3) ... Selecting previously unselected package libglib2.0-0:i386. Preparing to unpack .../024-libglib2.0-0_2.58.3-2+deb10u2_i386.deb ... Unpacking libglib2.0-0:i386 (2.58.3-2+deb10u2) ... Selecting previously unselected package libicu63:i386. Preparing to unpack .../025-libicu63_63.1-6_i386.deb ... Unpacking libicu63:i386 (63.1-6) ... Selecting previously unselected package libxml2:i386. Preparing to unpack .../026-libxml2_2.9.4+dfsg1-7+b3_i386.deb ... Unpacking libxml2:i386 (2.9.4+dfsg1-7+b3) ... Selecting previously unselected package libcroco3:i386. Preparing to unpack .../027-libcroco3_0.6.12-3_i386.deb ... Unpacking libcroco3:i386 (0.6.12-3) ... Selecting previously unselected package libncurses6:i386. Preparing to unpack .../028-libncurses6_6.1+20181013-2+deb10u2_i386.deb ... Unpacking libncurses6:i386 (6.1+20181013-2+deb10u2) ... Selecting previously unselected package gettext. Preparing to unpack .../029-gettext_0.19.8.1-9_i386.deb ... Unpacking gettext (0.19.8.1-9) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../030-intltool-debian_0.35.0+20060710.5_all.deb ... Unpacking intltool-debian (0.35.0+20060710.5) ... Selecting previously unselected package po-debconf. Preparing to unpack .../031-po-debconf_1.0.21_all.deb ... Unpacking po-debconf (1.0.21) ... Selecting previously unselected package debhelper. Preparing to unpack .../032-debhelper_12.1.1_all.deb ... Unpacking debhelper (12.1.1) ... Selecting previously unselected package libassuan0:i386. Preparing to unpack .../033-libassuan0_2.5.2-1_i386.deb ... Unpacking libassuan0:i386 (2.5.2-1) ... Selecting previously unselected package gpgconf. Preparing to unpack .../034-gpgconf_2.2.12-1+deb10u1_i386.deb ... Unpacking gpgconf (2.2.12-1+deb10u1) ... Selecting previously unselected package lsb-base. Preparing to unpack .../035-lsb-base_10.2019051400_all.deb ... Unpacking lsb-base (10.2019051400) ... Selecting previously unselected package libksba8:i386. Preparing to unpack .../036-libksba8_1.3.5-2_i386.deb ... Unpacking libksba8:i386 (1.3.5-2) ... Selecting previously unselected package libsasl2-modules-db:i386. Preparing to unpack .../037-libsasl2-modules-db_2.1.27+dfsg-1+deb10u1_i386.deb ... Unpacking libsasl2-modules-db:i386 (2.1.27+dfsg-1+deb10u1) ... Selecting previously unselected package libsasl2-2:i386. Preparing to unpack .../038-libsasl2-2_2.1.27+dfsg-1+deb10u1_i386.deb ... Unpacking libsasl2-2:i386 (2.1.27+dfsg-1+deb10u1) ... Selecting previously unselected package libldap-common. Preparing to unpack .../039-libldap-common_2.4.47+dfsg-3+deb10u1_all.deb ... Unpacking libldap-common (2.4.47+dfsg-3+deb10u1) ... Selecting previously unselected package libldap-2.4-2:i386. Preparing to unpack .../040-libldap-2.4-2_2.4.47+dfsg-3+deb10u1_i386.deb ... Unpacking libldap-2.4-2:i386 (2.4.47+dfsg-3+deb10u1) ... Selecting previously unselected package libnpth0:i386. Preparing to unpack .../041-libnpth0_1.6-1_i386.deb ... Unpacking libnpth0:i386 (1.6-1) ... Selecting previously unselected package dirmngr. Preparing to unpack .../042-dirmngr_2.2.12-1+deb10u1_i386.deb ... Unpacking dirmngr (2.2.12-1+deb10u1) ... Selecting previously unselected package gnupg-l10n. Preparing to unpack .../043-gnupg-l10n_2.2.12-1+deb10u1_all.deb ... Unpacking gnupg-l10n (2.2.12-1+deb10u1) ... Selecting previously unselected package gnupg-utils. Preparing to unpack .../044-gnupg-utils_2.2.12-1+deb10u1_i386.deb ... Unpacking gnupg-utils (2.2.12-1+deb10u1) ... Selecting previously unselected package gpg. Preparing to unpack .../045-gpg_2.2.12-1+deb10u1_i386.deb ... Unpacking gpg (2.2.12-1+deb10u1) ... Selecting previously unselected package pinentry-curses. Preparing to unpack .../046-pinentry-curses_1.1.0-2_i386.deb ... Unpacking pinentry-curses (1.1.0-2) ... Selecting previously unselected package gpg-agent. Preparing to unpack .../047-gpg-agent_2.2.12-1+deb10u1_i386.deb ... Unpacking gpg-agent (2.2.12-1+deb10u1) ... Selecting previously unselected package gpg-wks-client. Preparing to unpack .../048-gpg-wks-client_2.2.12-1+deb10u1_i386.deb ... Unpacking gpg-wks-client (2.2.12-1+deb10u1) ... Selecting previously unselected package gpg-wks-server. Preparing to unpack .../049-gpg-wks-server_2.2.12-1+deb10u1_i386.deb ... Unpacking gpg-wks-server (2.2.12-1+deb10u1) ... Selecting previously unselected package gpgsm. Preparing to unpack .../050-gpgsm_2.2.12-1+deb10u1_i386.deb ... Unpacking gpgsm (2.2.12-1+deb10u1) ... Selecting previously unselected package gnupg. Preparing to unpack .../051-gnupg_2.2.12-1+deb10u1_all.deb ... Unpacking gnupg (2.2.12-1+deb10u1) ... Selecting previously unselected package libfile-which-perl. Preparing to unpack .../052-libfile-which-perl_1.23-1_all.deb ... Unpacking libfile-which-perl (1.23-1) ... Selecting previously unselected package libfile-homedir-perl. Preparing to unpack .../053-libfile-homedir-perl_1.004-1_all.deb ... Unpacking libfile-homedir-perl (1.004-1) ... Selecting previously unselected package libio-pty-perl. Preparing to unpack .../054-libio-pty-perl_1%3a1.08-1.1+b5_i386.deb ... Unpacking libio-pty-perl (1:1.08-1.1+b5) ... Selecting previously unselected package libipc-run-perl. Preparing to unpack .../055-libipc-run-perl_20180523.0-1_all.deb ... Unpacking libipc-run-perl (20180523.0-1) ... Selecting previously unselected package libclass-method-modifiers-perl. Preparing to unpack .../056-libclass-method-modifiers-perl_2.12-1_all.deb ... Unpacking libclass-method-modifiers-perl (2.12-1) ... Selecting previously unselected package libsub-exporter-progressive-perl. Preparing to unpack .../057-libsub-exporter-progressive-perl_0.001013-1_all.deb ... Unpacking libsub-exporter-progressive-perl (0.001013-1) ... Selecting previously unselected package libdevel-globaldestruction-perl. Preparing to unpack .../058-libdevel-globaldestruction-perl_0.14-1_all.deb ... Unpacking libdevel-globaldestruction-perl (0.14-1) ... Selecting previously unselected package libb-hooks-op-check-perl. Preparing to unpack .../059-libb-hooks-op-check-perl_0.22-1+b1_i386.deb ... Unpacking libb-hooks-op-check-perl (0.22-1+b1) ... Selecting previously unselected package libdynaloader-functions-perl. Preparing to unpack .../060-libdynaloader-functions-perl_0.003-1_all.deb ... Unpacking libdynaloader-functions-perl (0.003-1) ... Selecting previously unselected package libdevel-callchecker-perl. Preparing to unpack .../061-libdevel-callchecker-perl_0.008-1_i386.deb ... Unpacking libdevel-callchecker-perl (0.008-1) ... Selecting previously unselected package libparams-classify-perl. Preparing to unpack .../062-libparams-classify-perl_0.015-1+b1_i386.deb ... Unpacking libparams-classify-perl (0.015-1+b1) ... Selecting previously unselected package libmodule-runtime-perl. Preparing to unpack .../063-libmodule-runtime-perl_0.016-1_all.deb ... Unpacking libmodule-runtime-perl (0.016-1) ... Selecting previously unselected package libimport-into-perl. Preparing to unpack .../064-libimport-into-perl_1.002005-1_all.deb ... Unpacking libimport-into-perl (1.002005-1) ... Selecting previously unselected package librole-tiny-perl. Preparing to unpack .../065-librole-tiny-perl_2.000006-1_all.deb ... Unpacking librole-tiny-perl (2.000006-1) ... Selecting previously unselected package libstrictures-perl. Preparing to unpack .../066-libstrictures-perl_2.000005-1_all.deb ... Unpacking libstrictures-perl (2.000005-1) ... Selecting previously unselected package libsub-quote-perl. Preparing to unpack .../067-libsub-quote-perl_2.005001-1_all.deb ... Unpacking libsub-quote-perl (2.005001-1) ... Selecting previously unselected package libmoo-perl. Preparing to unpack .../068-libmoo-perl_2.003004-2_all.deb ... Unpacking libmoo-perl (2.003004-2) ... Selecting previously unselected package libencode-locale-perl. Preparing to unpack .../069-libencode-locale-perl_1.05-1_all.deb ... Unpacking libencode-locale-perl (1.05-1) ... Selecting previously unselected package libtimedate-perl. Preparing to unpack .../070-libtimedate-perl_2.3000-2+deb10u1_all.deb ... Unpacking libtimedate-perl (2.3000-2+deb10u1) ... Selecting previously unselected package libhttp-date-perl. Preparing to unpack .../071-libhttp-date-perl_6.02-1_all.deb ... Unpacking libhttp-date-perl (6.02-1) ... Selecting previously unselected package libfile-listing-perl. Preparing to unpack .../072-libfile-listing-perl_6.04-1_all.deb ... Unpacking libfile-listing-perl (6.04-1) ... Selecting previously unselected package libhtml-tagset-perl. Preparing to unpack .../073-libhtml-tagset-perl_3.20-3_all.deb ... Unpacking libhtml-tagset-perl (3.20-3) ... Selecting previously unselected package liburi-perl. Preparing to unpack .../074-liburi-perl_1.76-1_all.deb ... Unpacking liburi-perl (1.76-1) ... Selecting previously unselected package libhtml-parser-perl. Preparing to unpack .../075-libhtml-parser-perl_3.72-3+b3_i386.deb ... Unpacking libhtml-parser-perl (3.72-3+b3) ... Selecting previously unselected package libhtml-tree-perl. Preparing to unpack .../076-libhtml-tree-perl_5.07-2_all.deb ... Unpacking libhtml-tree-perl (5.07-2) ... Selecting previously unselected package libio-html-perl. Preparing to unpack .../077-libio-html-perl_1.001-1_all.deb ... Unpacking libio-html-perl (1.001-1) ... Selecting previously unselected package liblwp-mediatypes-perl. Preparing to unpack .../078-liblwp-mediatypes-perl_6.02-1_all.deb ... Unpacking liblwp-mediatypes-perl (6.02-1) ... Selecting previously unselected package libhttp-message-perl. Preparing to unpack .../079-libhttp-message-perl_6.18-1_all.deb ... Unpacking libhttp-message-perl (6.18-1) ... Selecting previously unselected package libhttp-cookies-perl. Preparing to unpack .../080-libhttp-cookies-perl_6.04-1_all.deb ... Unpacking libhttp-cookies-perl (6.04-1) ... Selecting previously unselected package libhttp-negotiate-perl. Preparing to unpack .../081-libhttp-negotiate-perl_6.01-1_all.deb ... Unpacking libhttp-negotiate-perl (6.01-1) ... Selecting previously unselected package perl-openssl-defaults:i386. Preparing to unpack .../082-perl-openssl-defaults_3_i386.deb ... Unpacking perl-openssl-defaults:i386 (3) ... Selecting previously unselected package libnet-ssleay-perl. Preparing to unpack .../083-libnet-ssleay-perl_1.85-2+b1_i386.deb ... Unpacking libnet-ssleay-perl (1.85-2+b1) ... Selecting previously unselected package libio-socket-ssl-perl. Preparing to unpack .../084-libio-socket-ssl-perl_2.060-3_all.deb ... Unpacking libio-socket-ssl-perl (2.060-3) ... Selecting previously unselected package libnet-http-perl. Preparing to unpack .../085-libnet-http-perl_6.18-1_all.deb ... Unpacking libnet-http-perl (6.18-1) ... Selecting previously unselected package liblwp-protocol-https-perl. Preparing to unpack .../086-liblwp-protocol-https-perl_6.07-2_all.deb ... Unpacking liblwp-protocol-https-perl (6.07-2) ... Selecting previously unselected package libtry-tiny-perl. Preparing to unpack .../087-libtry-tiny-perl_0.30-1_all.deb ... Unpacking libtry-tiny-perl (0.30-1) ... Selecting previously unselected package libwww-robotrules-perl. Preparing to unpack .../088-libwww-robotrules-perl_6.02-1_all.deb ... Unpacking libwww-robotrules-perl (6.02-1) ... Selecting previously unselected package libwww-perl. Preparing to unpack .../089-libwww-perl_6.36-2_all.deb ... Unpacking libwww-perl (6.36-2) ... Selecting previously unselected package patchutils. Preparing to unpack .../090-patchutils_0.3.4-2_i386.deb ... Unpacking patchutils (0.3.4-2) ... Selecting previously unselected package wdiff. Preparing to unpack .../091-wdiff_1.2.2-2+b1_i386.deb ... Unpacking wdiff (1.2.2-2+b1) ... Selecting previously unselected package devscripts. Preparing to unpack .../092-devscripts_2.19.5+deb10u1_i386.deb ... Unpacking devscripts (2.19.5+deb10u1) ... Selecting previously unselected package dh-buildinfo. Preparing to unpack .../093-dh-buildinfo_0.11+nmu2_all.deb ... Unpacking dh-buildinfo (0.11+nmu2) ... Selecting previously unselected package fonts-dejavu-core. Preparing to unpack .../094-fonts-dejavu-core_2.37-1_all.deb ... Unpacking fonts-dejavu-core (2.37-1) ... Selecting previously unselected package fontconfig-config. Preparing to unpack .../095-fontconfig-config_2.13.1-2_all.deb ... Unpacking fontconfig-config (2.13.1-2) ... Selecting previously unselected package libio-string-perl. Preparing to unpack .../096-libio-string-perl_1.08-3_all.deb ... Unpacking libio-string-perl (1.08-3) ... Selecting previously unselected package libfont-ttf-perl. Preparing to unpack .../097-libfont-ttf-perl_1.06-1_all.deb ... Unpacking libfont-ttf-perl (1.06-1) ... Selecting previously unselected package libpng16-16:i386. Preparing to unpack .../098-libpng16-16_1.6.36-6_i386.deb ... Unpacking libpng16-16:i386 (1.6.36-6) ... Selecting previously unselected package libfreetype6:i386. Preparing to unpack .../099-libfreetype6_2.9.1-3+deb10u1_i386.deb ... Unpacking libfreetype6:i386 (2.9.1-3+deb10u1) ... Selecting previously unselected package libfontconfig1:i386. Preparing to unpack .../100-libfontconfig1_2.13.1-2_i386.deb ... Unpacking libfontconfig1:i386 (2.13.1-2) ... Selecting previously unselected package libjpeg62-turbo:i386. Preparing to unpack .../101-libjpeg62-turbo_1%3a1.5.2-2+b1_i386.deb ... Unpacking libjpeg62-turbo:i386 (1:1.5.2-2+b1) ... Selecting previously unselected package libjbig0:i386. Preparing to unpack .../102-libjbig0_2.1-3.1+b2_i386.deb ... Unpacking libjbig0:i386 (2.1-3.1+b2) ... Selecting previously unselected package libwebp6:i386. Preparing to unpack .../103-libwebp6_0.6.1-2_i386.deb ... Unpacking libwebp6:i386 (0.6.1-2) ... Selecting previously unselected package libtiff5:i386. Preparing to unpack .../104-libtiff5_4.1.0+git191117-2~deb10u1_i386.deb ... Unpacking libtiff5:i386 (4.1.0+git191117-2~deb10u1) ... Selecting previously unselected package libxau6:i386. Preparing to unpack .../105-libxau6_1%3a1.0.8-1+b2_i386.deb ... Unpacking libxau6:i386 (1:1.0.8-1+b2) ... Selecting previously unselected package libxdmcp6:i386. Preparing to unpack .../106-libxdmcp6_1%3a1.1.2-3_i386.deb ... Unpacking libxdmcp6:i386 (1:1.1.2-3) ... Selecting previously unselected package libxcb1:i386. Preparing to unpack .../107-libxcb1_1.13.1-2_i386.deb ... Unpacking libxcb1:i386 (1.13.1-2) ... Selecting previously unselected package libx11-data. Preparing to unpack .../108-libx11-data_2%3a1.6.7-1_all.deb ... Unpacking libx11-data (2:1.6.7-1) ... Selecting previously unselected package libx11-6:i386. Preparing to unpack .../109-libx11-6_2%3a1.6.7-1_i386.deb ... Unpacking libx11-6:i386 (2:1.6.7-1) ... Selecting previously unselected package libxpm4:i386. Preparing to unpack .../110-libxpm4_1%3a3.5.12-1_i386.deb ... Unpacking libxpm4:i386 (1:3.5.12-1) ... Selecting previously unselected package libgd3:i386. Preparing to unpack .../111-libgd3_2.2.5-5.2_i386.deb ... Unpacking libgd3:i386 (2.2.5-5.2) ... Selecting previously unselected package libgd-perl. Preparing to unpack .../112-libgd-perl_2.71-2_i386.deb ... Unpacking libgd-perl (2.71-2) ... Selecting previously unselected package libgd-text-perl. Preparing to unpack .../113-libgd-text-perl_0.86-9_all.deb ... Unpacking libgd-text-perl (0.86-9) ... Selecting previously unselected package libgd-graph-perl. Preparing to unpack .../114-libgd-graph-perl_1.54~ds-2_all.deb ... Unpacking libgd-graph-perl (1.54~ds-2) ... Selecting previously unselected package libimage-exiftool-perl. Preparing to unpack .../115-libimage-exiftool-perl_11.16-1_all.deb ... Unpacking libimage-exiftool-perl (11.16-1) ... Selecting previously unselected package libregexp-assemble-perl. Preparing to unpack .../116-libregexp-assemble-perl_0.36-1_all.deb ... Unpacking libregexp-assemble-perl (0.36-1) ... Setting up libksba8:i386 (1.3.5-2) ... Setting up libpipeline1:i386 (1.5.1-2) ... Setting up wdiff (1.2.2-2+b1) ... Setting up lsb-base (10.2019051400) ... Setting up libfile-which-perl (1.23-1) ... Setting up libxau6:i386 (1:1.0.8-1+b2) ... Setting up mime-support (3.62) ... Setting up libdynaloader-functions-perl (0.003-1) ... Setting up libclass-method-modifiers-perl (2.12-1) ... Setting up libio-pty-perl (1:1.08-1.1+b5) ... Setting up libmagic-mgc (1:5.35-4+deb10u1) ... Setting up libarchive-zip-perl (1.64-1) ... Setting up libglib2.0-0:i386 (2.58.3-2+deb10u2) ... No schema files found: doing nothing. Setting up libhtml-tagset-perl (3.20-3) ... Setting up liblwp-mediatypes-perl (6.02-1) ... Setting up libtry-tiny-perl (0.30-1) ... Setting up libmagic1:i386 (1:5.35-4+deb10u1) ... Setting up perl-openssl-defaults:i386 (3) ... Setting up gettext-base (0.19.8.1-9) ... Setting up libencode-locale-perl (1.05-1) ... Setting up libnpth0:i386 (1.6-1) ... Setting up file (1:5.35-4+deb10u1) ... Setting up libassuan0:i386 (2.5.2-1) ... Setting up libldap-common (2.4.47+dfsg-3+deb10u1) ... Setting up libjbig0:i386 (2.1-3.1+b2) ... Setting up libimage-exiftool-perl (11.16-1) ... Setting up libicu63:i386 (63.1-6) ... Setting up libsasl2-modules-db:i386 (2.1.27+dfsg-1+deb10u1) ... Setting up patchutils (0.3.4-2) ... Setting up libio-string-perl (1.08-3) ... Setting up autotools-dev (20180224.1) ... Setting up libjpeg62-turbo:i386 (1:1.5.2-2+b1) ... Setting up libx11-data (2:1.6.7-1) ... Setting up gnupg-l10n (2.2.12-1+deb10u1) ... Setting up libncurses6:i386 (6.1+20181013-2+deb10u2) ... Setting up libsigsegv2:i386 (2.12-2) ... Setting up libpng16-16:i386 (1.6.36-6) ... Setting up libio-html-perl (1.001-1) ... Setting up autopoint (0.19.8.1-9) ... Setting up libwebp6:i386 (0.6.1-2) ... Setting up libb-hooks-op-check-perl (0.22-1+b1) ... Setting up fonts-dejavu-core (2.37-1) ... Setting up libipc-run-perl (20180523.0-1) ... Setting up libsasl2-2:i386 (2.1.27+dfsg-1+deb10u1) ... Setting up libsub-exporter-progressive-perl (0.001013-1) ... Setting up libtimedate-perl (2.3000-2+deb10u1) ... Setting up sensible-utils (0.0.12) ... Setting up libuchardet0:i386 (0.0.6-3) ... Setting up librole-tiny-perl (2.000006-1) ... Setting up libdevel-globaldestruction-perl (0.14-1) ... Setting up netbase (5.6) ... Setting up libstrictures-perl (2.000005-1) ... Setting up libsub-quote-perl (2.005001-1) ... Setting up libtiff5:i386 (4.1.0+git191117-2~deb10u1) ... Setting up libmpdec2:i386 (2.4.2-2) ... Setting up libfont-ttf-perl (1.06-1) ... Setting up libfile-homedir-perl (1.004-1) ... Setting up libregexp-assemble-perl (0.36-1) ... Setting up openssl (1.1.1d-0+deb10u2) ... Setting up libbsd0:i386 (0.9.1-2) ... Setting up cdbs (0.4.159) ... Setting up libelf1:i386 (0.176-1.1) ... Setting up readline-common (7.0-5) ... Setting up libxml2:i386 (2.9.4+dfsg1-7+b3) ... Setting up liburi-perl (1.76-1) ... Setting up libreadline7:i386 (7.0-5) ... Setting up gnupg-utils (2.2.12-1+deb10u1) ... Setting up libnet-ssleay-perl (1.85-2+b1) ... Setting up pinentry-curses (1.1.0-2) ... Setting up libfile-stripnondeterminism-perl (1.1.2-1) ... Setting up libhttp-date-perl (6.02-1) ... Setting up libxdmcp6:i386 (1:1.1.2-3) ... Setting up libpython3.7-stdlib:i386 (3.7.3-2+deb10u1) ... Setting up libxcb1:i386 (1.13.1-2) ... Setting up libfile-listing-perl (6.04-1) ... Setting up libtool (2.4.6-9) ... Setting up libldap-2.4-2:i386 (2.4.47+dfsg-3+deb10u1) ... Setting up libnet-http-perl (6.18-1) ... Setting up m4 (1.4.18-2) ... Setting up libdevel-callchecker-perl (0.008-1) ... Setting up ca-certificates (20190110) ... Updating certificates in /etc/ssl/certs... 128 added, 0 removed; done. Setting up libfreetype6:i386 (2.9.1-3+deb10u1) ... Setting up bsdmainutils (11.1.2+b1) ... update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode Setting up libcroco3:i386 (0.6.12-3) ... Setting up ucf (3.0038+nmu1) ... Setting up autoconf (2.69-11) ... Setting up libwww-robotrules-perl (6.02-1) ... Setting up dwz (0.12-3) ... Setting up groff-base (1.22.4-3) ... Setting up libhtml-parser-perl (3.72-3+b3) ... Setting up gpgconf (2.2.12-1+deb10u1) ... Setting up libx11-6:i386 (2:1.6.7-1) ... Setting up libio-socket-ssl-perl (2.060-3) ... Setting up gpg (2.2.12-1+deb10u1) ... Setting up libpython3-stdlib:i386 (3.7.3-1) ... Setting up libhttp-message-perl (6.18-1) ... Setting up automake (1:1.16.1-4) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up python3.7 (3.7.3-2+deb10u1) ... Setting up libhttp-negotiate-perl (6.01-1) ... Setting up gettext (0.19.8.1-9) ... Setting up gpg-agent (2.2.12-1+deb10u1) ... Setting up libxpm4:i386 (1:3.5.12-1) ... Setting up libhttp-cookies-perl (6.04-1) ... Setting up fontconfig-config (2.13.1-2) ... Setting up libhtml-tree-perl (5.07-2) ... Setting up libparams-classify-perl (0.015-1+b1) ... Setting up gpgsm (2.2.12-1+deb10u1) ... Setting up python3 (3.7.3-1) ... Setting up man-db (2.8.5-2) ... Not building database; man-db/auto-update is not 'true'. Setting up intltool-debian (0.35.0+20060710.5) ... Setting up dirmngr (2.2.12-1+deb10u1) ... Setting up libmodule-runtime-perl (0.016-1) ... Setting up gpg-wks-server (2.2.12-1+deb10u1) ... Setting up libfontconfig1:i386 (2.13.1-2) ... Setting up gpg-wks-client (2.2.12-1+deb10u1) ... Setting up libimport-into-perl (1.002005-1) ... Setting up libmoo-perl (2.003004-2) ... Setting up po-debconf (1.0.21) ... Setting up libgd3:i386 (2.2.5-5.2) ... Setting up gnupg (2.2.12-1+deb10u1) ... Setting up libgd-perl (2.71-2) ... Setting up libgd-text-perl (0.86-9) ... Setting up libgd-graph-perl (1.54~ds-2) ... Setting up dh-autoreconf (19) ... Setting up dh-strip-nondeterminism (1.1.2-1) ... Setting up liblwp-protocol-https-perl (6.07-2) ... Setting up libwww-perl (6.36-2) ... Setting up debhelper (12.1.1) ... Setting up devscripts (2.19.5+deb10u1) ... Setting up dh-buildinfo (0.11+nmu2) ... Processing triggers for libc-bin (2.28-10) ... Processing triggers for ca-certificates (20190110) ... Updating certificates in /etc/ssl/certs... 0 added, 0 removed; done. Running hooks in /etc/ca-certificates/update.d... done. Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.23-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/libgd-graph3d-perl-0.63/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b dpkg-buildpackage: info: source package libgd-graph3d-perl dpkg-buildpackage: info: source version 0.63-9 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Jonas Smedegaard dpkg-source --before-build . dpkg-buildpackage: info: host architecture i386 fakeroot debian/rules clean CDBS WARNING: copyright-check disabled - licensecheck is missing. test -x debian/rules rm -f debian/stamp-makefile-build debian/stamp-makefile-install /usr/bin/make -C . OPTIMIZE="-g -O2 -ffile-prefix-map=/build/libgd-graph3d-perl-0.63=. -fstack-protector-strong -Wformat -Werror=format-security -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include" LDDLFLAGS="-Wl,-z,relro -shared -L/usr/local/lib -fstack-protector-strong" -k clean make[1]: Entering directory '/build/libgd-graph3d-perl-0.63' make[1]: *** No rule to make target 'clean'. make[1]: Leaving directory '/build/libgd-graph3d-perl-0.63' make: [/usr/share/cdbs/1/class/makefile.mk:91: makefile-clean] Error 2 (ignored) rm -f debian/stamp-makefile-check rm -f debian/copyright_newhints rm -f debian/cdbs-install-list debian/cdbs-package-list debian/stamp-copyright-check rm -rf "debian/upstream-cruft" rm -f debian/stamp-upstream-cruft dh_clean dh_clean: Compatibility levels before 9 are deprecated (level 8 in use) find -type f -name '*.metadata_dump' -delete rm -f debian/stamp-extract-copyright debian/rules build CDBS WARNING: copyright-check disabled - licensecheck is missing. test -x debian/rules mkdir -p "." CDBS WARNING: DEB_COPYRIGHT_CHECK_IGNORE_REGEX is deprecated since 0.4.133 Scanning upstream source for new/changed copyright notices... set -e; LC_ALL=C.UTF-8 /usr/bin/licensecheck --check '.*' --recursive --copyright --deb-fmt --ignore '^((.*/)?[^/]+\.(png)|debian/(changelog|copyright(|_hints|_newhints)))$' --lines 0 -- * | /usr/lib/cdbs/licensecheck2dep5 > debian/copyright_newhints /bin/sh: 1: /usr/bin/licensecheck: not found find * -type f -regextype posix-extended \ -regex '.*\.(png)' \ -print0 | perl -0 debian/license-miner touch debian/stamp-extract-copyright 0 combinations of copyright and licensing found. WARNING: New or changed notices discovered: Format: https://www.debian.org/doc/packaging-manuals/copyright-format/1.0/ To fix the situation please do the following: 1) Examine debian/copyright_* and referenced files 2) Update debian/copyright as needed 3) Replace debian/copyright_hints with debian/copyright_newhints touch debian/stamp-copyright-check touch debian/stamp-upstream-cruft find -type f -name '*.metadata_dump' -delete cd . && /usr/bin/perl -I. Makefile.PL NOECHO= INSTALLDIRS=vendor Undefined requirement for GD::Text::Align treated as '0' at /usr/share/perl/5.28/ExtUtils/MakeMaker.pm line 470. Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for GD::Graph3d Writing MYMETA.yml and MYMETA.json The test suite for GD::Graph3d is very basic. It makes sure that graphs objects can be contructed and plotted. If you want to verify that the plots are accurate, you should run the 'visual-test.pl' script in the t/ directory. To do this you may need to look at images in a web browser or graphics program and visually verify that they are substantially similar. Otherwise continue on with the standard 'make', 'make test', 'make install' procedure. /usr/bin/make -C . OPTIMIZE="-g -O2 -ffile-prefix-map=/build/libgd-graph3d-perl-0.63=. -fstack-protector-strong -Wformat -Werror=format-security -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include" LDDLFLAGS="-Wl,-z,relro -shared -L/usr/local/lib -fstack-protector-strong" all make[1]: Entering directory '/build/libgd-graph3d-perl-0.63' "/usr/bin/perl" -MExtUtils::Command -e 'mkpath' -- blib/lib/GD chmod 755 blib/lib/GD touch blib/lib/GD/.exists "/usr/bin/perl" -MExtUtils::Command -e 'mkpath' -- blib/arch chmod 755 blib/arch touch blib/arch/.exists "/usr/bin/perl" -MExtUtils::Command -e 'mkpath' -- blib/lib/auto/GD/Graph3d chmod 755 blib/lib/auto/GD/Graph3d touch blib/lib/auto/GD/Graph3d/.exists "/usr/bin/perl" -MExtUtils::Command -e 'mkpath' -- blib/arch/auto/GD/Graph3d chmod 755 blib/arch/auto/GD/Graph3d touch blib/arch/auto/GD/Graph3d/.exists "/usr/bin/perl" -MExtUtils::Command -e 'mkpath' -- blib/bin chmod 755 blib/bin touch blib/bin/.exists "/usr/bin/perl" -MExtUtils::Command -e 'mkpath' -- blib/script chmod 755 blib/script touch blib/script/.exists "/usr/bin/perl" -MExtUtils::Command -e 'mkpath' -- blib/man1 chmod 755 blib/man1 touch blib/man1/.exists "/usr/bin/perl" -MExtUtils::Command -e 'mkpath' -- blib/man3 chmod 755 blib/man3 touch blib/man3/.exists true true true "/usr/bin/perl" -MExtUtils::Install -e 'pm_to_blib({@ARGV}, '\''blib/lib/auto'\'', q[], '\''755'\'')' -- \ 'lib/GD/Graph/axestype3d.pm' 'blib/lib/GD/Graph/axestype3d.pm' \ 'lib/GD/Graph/bars3d.pm' 'blib/lib/GD/Graph/bars3d.pm' \ 'lib/GD/Graph/cylinder.pm' 'blib/lib/GD/Graph/cylinder.pm' \ 'lib/GD/Graph/cylinder3d.pm' 'blib/lib/GD/Graph/cylinder3d.pm' \ 'lib/GD/Graph/lines3d.pm' 'blib/lib/GD/Graph/lines3d.pm' \ 'lib/GD/Graph/pie3d.pm' 'blib/lib/GD/Graph/pie3d.pm' \ 'lib/GD/Graph3d.pm' 'blib/lib/GD/Graph3d.pm' cp lib/GD/Graph/pie3d.pm blib/lib/GD/Graph/pie3d.pm cp lib/GD/Graph3d.pm blib/lib/GD/Graph3d.pm cp lib/GD/Graph/bars3d.pm blib/lib/GD/Graph/bars3d.pm cp lib/GD/Graph/axestype3d.pm blib/lib/GD/Graph/axestype3d.pm cp lib/GD/Graph/cylinder.pm blib/lib/GD/Graph/cylinder.pm cp lib/GD/Graph/cylinder3d.pm blib/lib/GD/Graph/cylinder3d.pm cp lib/GD/Graph/lines3d.pm blib/lib/GD/Graph/lines3d.pm touch pm_to_blib true true true true true true "/usr/bin/perl" "-MExtUtils::Command::MM" -e pod2man "--" --section=3pm --perm_rw=644 -u \ lib/GD/Graph3d.pm blib/man3/GD::Graph3d.3pm Manifying 1 pod document true make[1]: Leaving directory '/build/libgd-graph3d-perl-0.63' touch debian/stamp-makefile-build /usr/bin/make -C . OPTIMIZE="-g -O2 -ffile-prefix-map=/build/libgd-graph3d-perl-0.63=. -fstack-protector-strong -Wformat -Werror=format-security -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include" LDDLFLAGS="-Wl,-z,relro -shared -L/usr/local/lib -fstack-protector-strong" test TEST_VERBOSE=1 make[1]: Entering directory '/build/libgd-graph3d-perl-0.63' true true true true true true true true true PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/all.t .. 1..15 # Running under perl version 5.028001 for linux # Current time local: Tue Feb 25 21:26:01 2020 # Current time GMT: Wed Feb 26 09:26:01 2020 # Using Test.pm version 1.31 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok All tests successful. Files=1, Tests=15, 0 wallclock secs ( 0.02 usr 0.01 sys + 0.10 cusr 0.02 csys = 0.15 CPU) Result: PASS true make[1]: Leaving directory '/build/libgd-graph3d-perl-0.63' touch debian/stamp-makefile-check fakeroot debian/rules binary CDBS WARNING: copyright-check disabled - licensecheck is missing. test -x debian/rules dh_testroot dh_prep dh_installdirs -A dh_installdirs: Compatibility levels before 9 are deprecated (level 8 in use) mkdir -p "." CDBS WARNING: DEB_COPYRIGHT_CHECK_IGNORE_REGEX is deprecated since 0.4.133 find -type f -name '*.metadata_dump' -delete /usr/bin/make -C . OPTIMIZE="-g -O2 -ffile-prefix-map=/build/libgd-graph3d-perl-0.63=. -fstack-protector-strong -Wformat -Werror=format-security -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include" LDDLFLAGS="-Wl,-z,relro -shared -L/usr/local/lib -fstack-protector-strong" install DESTDIR=" /build/libgd-graph3d-perl-0.63/debian/libgd-graph3d-perl" make[1]: Entering directory '/build/libgd-graph3d-perl-0.63' true true true true true true true true true "/usr/bin/perl" "-MExtUtils::Command::MM" -e pod2man "--" --section=3pm --perm_rw=644 -u \ lib/GD/Graph3d.pm blib/man3/GD::Graph3d.3pm Manifying 1 pod document true umask 022; "/usr/bin/perl" -MExtUtils::Install -e 'install([ from_to => {@ARGV}, verbose => '\''0'\'', uninstall_shadows => '\''0'\'', dir_mode => '\''755'\'' ]);' -- \ "blib/lib" "/build/libgd-graph3d-perl-0.63/debian/libgd-graph3d-perl/usr/share/perl5" \ "blib/arch" "/build/libgd-graph3d-perl-0.63/debian/libgd-graph3d-perl/usr/lib/i386-linux-gnu/perl5/5.28" \ "blib/bin" "/build/libgd-graph3d-perl-0.63/debian/libgd-graph3d-perl/usr/bin" \ "blib/script" "/build/libgd-graph3d-perl-0.63/debian/libgd-graph3d-perl/usr/bin" \ "blib/man1" "/build/libgd-graph3d-perl-0.63/debian/libgd-graph3d-perl/usr/share/man/man1" \ "blib/man3" "/build/libgd-graph3d-perl-0.63/debian/libgd-graph3d-perl/usr/share/man/man3" Installing /build/libgd-graph3d-perl-0.63/debian/libgd-graph3d-perl/usr/share/perl5/GD/Graph3d.pm Installing /build/libgd-graph3d-perl-0.63/debian/libgd-graph3d-perl/usr/share/perl5/GD/Graph/cylinder3d.pm Installing /build/libgd-graph3d-perl-0.63/debian/libgd-graph3d-perl/usr/share/perl5/GD/Graph/axestype3d.pm Installing /build/libgd-graph3d-perl-0.63/debian/libgd-graph3d-perl/usr/share/perl5/GD/Graph/lines3d.pm Installing /build/libgd-graph3d-perl-0.63/debian/libgd-graph3d-perl/usr/share/perl5/GD/Graph/bars3d.pm Installing /build/libgd-graph3d-perl-0.63/debian/libgd-graph3d-perl/usr/share/perl5/GD/Graph/cylinder.pm Installing /build/libgd-graph3d-perl-0.63/debian/libgd-graph3d-perl/usr/share/perl5/GD/Graph/pie3d.pm Installing /build/libgd-graph3d-perl-0.63/debian/libgd-graph3d-perl/usr/share/man/man3/GD::Graph3d.3pm true true true make[1]: Leaving directory '/build/libgd-graph3d-perl-0.63' touch debian/stamp-makefile-install Adding cdbs dependencies to debian/libgd-graph3d-perl.substvars dh_installdirs -plibgd-graph3d-perl \ dh_installdirs: Compatibility levels before 9 are deprecated (level 8 in use) dh_installdocs -plibgd-graph3d-perl dh_installdocs: Compatibility levels before 9 are deprecated (level 8 in use) dh_installexamples -plibgd-graph3d-perl dh_installexamples: Compatibility levels before 9 are deprecated (level 8 in use) dh_installman -plibgd-graph3d-perl dh_installman: Compatibility levels before 9 are deprecated (level 8 in use) dh_installinfo -plibgd-graph3d-perl dh_installinfo: Compatibility levels before 9 are deprecated (level 8 in use) dh_installmenu -plibgd-graph3d-perl dh_installcron -plibgd-graph3d-perl dh_systemd_enable -plibgd-graph3d-perl dh_systemd_enable: Compatibility levels before 9 are deprecated (level 8 in use) dh_installinit -plibgd-graph3d-perl dh_installinit: Compatibility levels before 9 are deprecated (level 8 in use) dh_installdebconf -plibgd-graph3d-perl dh_installemacsen -plibgd-graph3d-perl dh_installcatalogs -plibgd-graph3d-perl dh_installpam -plibgd-graph3d-perl dh_installlogrotate -plibgd-graph3d-perl dh_installlogcheck -plibgd-graph3d-perl dh_installchangelogs -plibgd-graph3d-perl ./Changes dh_installudev -plibgd-graph3d-perl dh_lintian -plibgd-graph3d-perl dh_bugfiles -plibgd-graph3d-perl dh_install -plibgd-graph3d-perl dh_install: Compatibility levels before 9 are deprecated (level 8 in use) dh_systemd_start -plibgd-graph3d-perl dh_systemd_start: Compatibility levels before 9 are deprecated (level 8 in use) dh_link -plibgd-graph3d-perl dh_buildinfo -plibgd-graph3d-perl dh_installmime -plibgd-graph3d-perl dh_installgsettings -plibgd-graph3d-perl dh_strip -plibgd-graph3d-perl dh_strip: Compatibility levels before 9 are deprecated (level 8 in use) dh_strip_nondeterminism -plibgd-graph3d-perl dh_compress -plibgd-graph3d-perl dh_compress: Compatibility levels before 9 are deprecated (level 8 in use) dh_fixperms -plibgd-graph3d-perl dh_makeshlibs -plibgd-graph3d-perl dh_installdeb -plibgd-graph3d-perl dh_installdeb: Compatibility levels before 9 are deprecated (level 8 in use) dh_perl -plibgd-graph3d-perl dh_shlibdeps -plibgd-graph3d-perl dh_shlibdeps: Compatibility levels before 9 are deprecated (level 8 in use) dh_gencontrol -plibgd-graph3d-perl dh_md5sums -plibgd-graph3d-perl dh_builddeb -plibgd-graph3d-perl dpkg-deb: building package 'libgd-graph3d-perl' in '../libgd-graph3d-perl_0.63-9_all.deb'. dpkg-genbuildinfo --build=binary dpkg-genchanges --build=binary >../libgd-graph3d-perl_0.63-9_i386.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/31286 and its subdirectories I: Current time: Tue Feb 25 21:26:08 -12 2020 I: pbuilder-time-stamp: 1582709168 Wed Feb 26 09:26:08 UTC 2020 I: 1st build successful. Starting 2nd build on remote node profitbricks-build16-i386.debian.net. Wed Feb 26 09:26:08 UTC 2020 I: Preparing to do remote build '2' on profitbricks-build16-i386.debian.net. Wed Feb 26 09:26:36 UTC 2020 I: Deleting $TMPDIR on profitbricks-build16-i386.debian.net. Wed Feb 26 09:26:36 UTC 2020 I: libgd-graph3d-perl_0.63-9_i386.changes: Format: 1.8 Date: Sat, 14 Jun 2014 12:27:03 +0200 Source: libgd-graph3d-perl Binary: libgd-graph3d-perl Architecture: all Version: 0.63-9 Distribution: unstable Urgency: low Maintainer: Debian Perl Group Changed-By: Jonas Smedegaard Description: libgd-graph3d-perl - Create 3D Graphs with GD and GD::Graph Changes: libgd-graph3d-perl (0.63-9) unstable; urgency=low . [ Gregor Herrmann ] * Remove debian/source/local-options: abort-on-upstream-changes and unapply-patches are default in dpkg-source since 1.16.1. . [ Salvatore Bonaccorso ] * Change to use canonical hot (anonscm.debian.org) in Vcs-Git URI. . [ Axel Beckert ] * Update copyright info: + Declare compliance with format version 1.0. . [ Jonas Smedegaard ] * Update copyright info: + Fix use comment and license pseudo-sections to obey silly restrictions of copyright format 1.0. + Quote license names in comments to avoid some ambiguity. + Extend packaging to cover recent years. + Bump licensing of packaging to GPL-3+. + Fix double-indent subsequent copyright holders. * Modernize CDBS: + Hard-include upstream-tarball.mk and utils.mk: Needed helper tools are now available even in oldstable. * Update package relations: + (Build-)depend on libgd-perl (with obsolete libgd-gd2-perl and libgd-gd2-noxpm-perl variants only as fallback). + Relax to (build-)depend unversioned on libgd-graph-perl, cdbs and debhelper: Needed versions satisfied even in oldstable. + Build-depend on devscripts and dh-buildinfo. + Build-depend on libregexp-assemble-perl, libimage-exiftool-perl and libfont-ttf-perl: Needed to extract copyright metadata. + Resolve package relations in rules file. * Update watch file to include metacpan.org URL (replacing search.cpan.org URL), in addition to www.cpan.org URL. Stop needless (and arguably bogus) upstream version mangling. * Bump Standards-Version to 3.9.5: Packaging is compliant with corresponding version of Debian Policy. * Bump debhelper compatibility level to 8: Needed package version satisfied even in oldstable, and no newer features needed. * Fix use canonical Vcs-Git and Vcs-Browser URLs. * Rewrap long description at 72 chars, and strip trailing whitespace. * Extract metadata from (not suppress) images before copyright check. Checksums-Sha1: 34c1eb127dcbb0b1f2172b6666c70c5862019116 28116 libgd-graph3d-perl_0.63-9_all.deb 45a5f295ef7b67446cfcbc1cba99645990f9a27e 8065 libgd-graph3d-perl_0.63-9_i386.buildinfo Checksums-Sha256: c168e10830531adb94768ee8f1286786a216ba8c0b8fe933252abdf14fe59d26 28116 libgd-graph3d-perl_0.63-9_all.deb c02cee4895f0827a3ec11bd3b7da4fd6fe9e581d11415412c5e5fba4871b96d0 8065 libgd-graph3d-perl_0.63-9_i386.buildinfo Files: b366b344174bd7f8f9405ea61e383cbb 28116 perl extra libgd-graph3d-perl_0.63-9_all.deb 2b90fe216e9e0050e4cf8375dd5154d7 8065 perl extra libgd-graph3d-perl_0.63-9_i386.buildinfo Wed Feb 26 09:26:37 UTC 2020 I: diffoscope 137 will be used to compare the two builds: # Profiling output for: /usr/bin/diffoscope --html /srv/reproducible-results/rbuild-debian/tmp.7GEuFIhhCi/libgd-graph3d-perl_0.63-9.diffoscope.html --text /srv/reproducible-results/rbuild-debian/tmp.7GEuFIhhCi/libgd-graph3d-perl_0.63-9.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/tmp.7GEuFIhhCi/libgd-graph3d-perl_0.63-9.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/tmp.7GEuFIhhCi/b1/libgd-graph3d-perl_0.63-9_i386.changes /srv/reproducible-results/rbuild-debian/tmp.7GEuFIhhCi/b2/libgd-graph3d-perl_0.63-9_i386.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.278s) 0.278s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.030s) 0.030s 10 calls diffoscope.comparators.binary.FilesystemFile Wed Feb 26 09:26:40 UTC 2020 I: diffoscope 137 found no differences in the changes files, and a .buildinfo file also exists. Wed Feb 26 09:26:40 UTC 2020 I: libgd-graph3d-perl from buster built successfully and reproducibly on i386. Wed Feb 26 09:26:41 UTC 2020 I: Submitting .buildinfo files to external archives: Wed Feb 26 09:26:41 UTC 2020 I: Submitting 12K b1/libgd-graph3d-perl_0.63-9_i386.buildinfo.asc Wed Feb 26 09:27:06 UTC 2020 I: Submitting 12K b2/libgd-graph3d-perl_0.63-9_i386.buildinfo.asc Wed Feb 26 09:27:11 UTC 2020 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Wed Feb 26 09:27:11 UTC 2020 I: Done submitting .buildinfo files. Wed Feb 26 09:27:11 UTC 2020 I: Removing signed libgd-graph3d-perl_0.63-9_i386.buildinfo.asc files: removed './b1/libgd-graph3d-perl_0.63-9_i386.buildinfo.asc' removed './b2/libgd-graph3d-perl_0.63-9_i386.buildinfo.asc'