Sun Jun 23 11:36:52 UTC 2019 I: starting to build libdbd-odbc-perl/buster/i386 on jenkins on '2019-06-23 11:36' Sun Jun 23 11:36:52 UTC 2019 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/i386_12/298/console.log Sun Jun 23 11:36:52 UTC 2019 I: Downloading source for buster/libdbd-odbc-perl=1.60-1 --2019-06-23 11:36:52-- http://deb.debian.org/debian/pool/main/libd/libdbd-odbc-perl/libdbd-odbc-perl_1.60-1.dsc Connecting to 78.137.99.97:3128... connected. Proxy request sent, awaiting response... 302 Found Location: http://cdn-fastly.deb.debian.org/debian/pool/main/libd/libdbd-odbc-perl/libdbd-odbc-perl_1.60-1.dsc [following] --2019-06-23 11:36:53-- http://cdn-fastly.deb.debian.org/debian/pool/main/libd/libdbd-odbc-perl/libdbd-odbc-perl_1.60-1.dsc Reusing existing connection to 78.137.99.97:3128. Proxy request sent, awaiting response... 200 OK Length: 2194 (2.1K) Saving to: ‘libdbd-odbc-perl_1.60-1.dsc’ 0K .. 100% 29.6M=0s 2019-06-23 11:36:53 (29.6 MB/s) - ‘libdbd-odbc-perl_1.60-1.dsc’ saved [2194/2194] Sun Jun 23 11:36:53 UTC 2019 I: libdbd-odbc-perl_1.60-1.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: libdbd-odbc-perl Binary: libdbd-odbc-perl Architecture: any Version: 1.60-1 Maintainer: Debian Perl Group Uploaders: gregor herrmann , Ansgar Burchardt , Xavier Guimard Homepage: https://metacpan.org/release/DBD-ODBC Standards-Version: 4.2.1 Vcs-Browser: https://salsa.debian.org/perl-team/modules/packages/libdbd-odbc-perl Vcs-Git: https://salsa.debian.org/perl-team/modules/packages/libdbd-odbc-perl.git Testsuite: autopkgtest-pkg-perl Build-Depends: debhelper (>= 10), libdbi-perl, libsqliteodbc, perl, unixodbc-dev Package-List: libdbd-odbc-perl deb perl optional arch=any Checksums-Sha1: b033e7ebf64c89bcd3e54f0ef1611c2b5721808d 282900 libdbd-odbc-perl_1.60.orig.tar.gz 54e1247d5fd68a3bd4ecda607456873c2009b851 9508 libdbd-odbc-perl_1.60-1.debian.tar.xz Checksums-Sha256: bd0ed6134349fbf7562b0873e85799c56a08c643f11f286ff2126595cf4ced4b 282900 libdbd-odbc-perl_1.60.orig.tar.gz 66e964c1109066a4fc9c878f7fad6f31393c03be305b9b157143644dfab9b9ea 9508 libdbd-odbc-perl_1.60-1.debian.tar.xz Files: e9a2bec96744f960832e4f47f9e4bcd0 282900 libdbd-odbc-perl_1.60.orig.tar.gz 8d8f770f1111d851f5b2f6aaec8a9d54 9508 libdbd-odbc-perl_1.60-1.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQJEBAEBCgAuFiEEAN/li4tVV3nRAF7J9tdMp8mZ7ukFAlvdS4gQHHlhZGRAZGVi aWFuLm9yZwAKCRD210ynyZnu6fWmD/9yBHFsDNl4APs4X6RxRm0fyT5e0po2PNZH uqCVrL/51DcTvtChjn6MCnD9Gf1oXTfYqR2+5uOoha7fCtJHU1pDpJzf26PHwFHT UQkJ1rq/9enJyfdgDopyWIvM/V+SLBMILBvJpQaTSugvatrI3an2IWcxV1Oepo70 aRZM0aeKDCvHFi7hRXZ3JGcY1JF6naeEWfWH7xb5fmneb8WwrZFoQeXwfUCsltb8 5zALCGxdjNX3kUPvmOw6E8zqugtDUub0WCA5IfGqiZvqUdt5eQ2+ZnFqw+C4jiOV 7vX415dcN7eBwNew+WrqzCCoR3IOATz0o4gmYqMxdBUQaIZB4IzRHFsvyGVgTELq aoNPuE5mATejcMNCGq6MMQda1UralBCxCxnW2YMgKkb3IwoXI05auaIWugsrYpml UrX4ZeEnjxfgnbnG3ja76cx1lsRK/RU0VyjPZ5KC2ksW4CodTeoG0Kyy+NRIL8Br xW2Gv0VcXuzRgDKRuL1ViDEJRr0vywFat1wFxl/y1kFGcUt/h5JK1lcNvUJ6yXIH 1CFocYepUl9flNt6Re1UY5gqJ73cNy4DgO9++xCjCA3A9aYkzmUk8Ns3Ud02nOFZ ClmIAhFkXBvw+DO3PbE+SFjBSO/VejAa82/TH90qWxTL6c1u0F3vgX7PaHqDd72l NnxSznCJJQ== =9eNZ -----END PGP SIGNATURE----- Sun Jun 23 11:36:53 UTC 2019 I: Checking whether the package is not for us Sun Jun 23 11:36:53 UTC 2019 I: Starting 1st build on remote node profitbricks-build16-i386.debian.net. Sun Jun 23 11:36:53 UTC 2019 I: Preparing to do remote build '1' on profitbricks-build16-i386.debian.net. Sun Jun 23 11:37:22 UTC 2019 I: Deleting $TMPDIR on profitbricks-build16-i386.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Sat Jul 25 05:59:55 -12 2020 I: pbuilder-time-stamp: 1595699995 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/buster-reproducible-base.tgz] I: copying local configuration I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: using eatmydata during job I: Copying source file I: copying [libdbd-odbc-perl_1.60-1.dsc] I: copying [./libdbd-odbc-perl_1.60.orig.tar.gz] I: copying [./libdbd-odbc-perl_1.60-1.debian.tar.xz] I: Extracting source gpgv: unknown type of key resource 'trustedkeys.kbx' gpgv: keyblock resource '/root/.gnupg/trustedkeys.kbx': General error gpgv: Signature made Fri Nov 2 19:17:28 2018 -12 gpgv: using RSA key 00DFE58B8B555779D1005EC9F6D74CA7C999EEE9 gpgv: issuer "yadd@debian.org" gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./libdbd-odbc-perl_1.60-1.dsc dpkg-source: info: extracting libdbd-odbc-perl in libdbd-odbc-perl-1.60 dpkg-source: info: unpacking libdbd-odbc-perl_1.60.orig.tar.gz dpkg-source: info: unpacking libdbd-odbc-perl_1.60-1.debian.tar.xz I: using fakeroot in build. I: Installing the build-deps -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: i386 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper (>= 10), libdbi-perl, libsqliteodbc, perl, unixodbc-dev dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19231 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper (>= 10); however: Package debhelper is not installed. pbuilder-satisfydepends-dummy depends on libdbi-perl; however: Package libdbi-perl is not installed. pbuilder-satisfydepends-dummy depends on libsqliteodbc; however: Package libsqliteodbc is not installed. pbuilder-satisfydepends-dummy depends on unixodbc-dev; however: Package unixodbc-dev is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdmainutils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libbsd0{a} libcroco3{a} libdbi-perl{a} libelf1{a} libfile-stripnondeterminism-perl{a} libglib2.0-0{a} libicu63{a} libltdl-dev{a} libltdl7{a} libmagic-mgc{a} libmagic1{a} libncurses6{a} libodbc1{a} libpipeline1{a} libsigsegv2{a} libsqliteodbc{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} odbcinst{a} odbcinst1debian2{a} po-debconf{a} sensible-utils{a} unixodbc-dev{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libglib2.0-data libgpm2 libmail-sendmail-perl lynx shared-mime-info wget xdg-user-dirs 0 packages upgraded, 41 newly installed, 0 to remove and 0 not upgraded. Need to get 21.4 MB of archives. After unpacking 76.7 MB will be used. Writing extended state information... Get: 1 http://cdn-fastly.deb.debian.org/debian buster/main i386 libbsd0 i386 0.9.1-2 [104 kB] Get: 2 http://cdn-fastly.deb.debian.org/debian buster/main i386 bsdmainutils i386 11.1.2+b1 [193 kB] Get: 3 http://cdn-fastly.deb.debian.org/debian buster/main i386 libuchardet0 i386 0.0.6-3 [65.2 kB] Get: 4 http://cdn-fastly.deb.debian.org/debian buster/main i386 groff-base i386 1.22.4-3 [935 kB] Get: 5 http://cdn-fastly.deb.debian.org/debian buster/main i386 libpipeline1 i386 1.5.1-2 [33.3 kB] Get: 6 http://cdn-fastly.deb.debian.org/debian buster/main i386 man-db i386 2.8.5-2 [1284 kB] Get: 7 http://cdn-fastly.deb.debian.org/debian buster/main i386 sensible-utils all 0.0.12 [15.8 kB] Get: 8 http://cdn-fastly.deb.debian.org/debian buster/main i386 libmagic-mgc i386 1:5.35-4 [242 kB] Get: 9 http://cdn-fastly.deb.debian.org/debian buster/main i386 libmagic1 i386 1:5.35-4 [124 kB] Get: 10 http://cdn-fastly.deb.debian.org/debian buster/main i386 file i386 1:5.35-4 [66.3 kB] Get: 11 http://cdn-fastly.deb.debian.org/debian buster/main i386 gettext-base i386 0.19.8.1-9 [124 kB] Get: 12 http://cdn-fastly.deb.debian.org/debian buster/main i386 libsigsegv2 i386 2.12-2 [33.2 kB] Get: 13 http://cdn-fastly.deb.debian.org/debian buster/main i386 m4 i386 1.4.18-2 [205 kB] Get: 14 http://cdn-fastly.deb.debian.org/debian buster/main i386 autoconf all 2.69-11 [341 kB] Get: 15 http://cdn-fastly.deb.debian.org/debian buster/main i386 autotools-dev all 20180224.1 [77.0 kB] Get: 16 http://cdn-fastly.deb.debian.org/debian buster/main i386 automake all 1:1.16.1-4 [771 kB] Get: 17 http://cdn-fastly.deb.debian.org/debian buster/main i386 autopoint all 0.19.8.1-9 [434 kB] Get: 18 http://cdn-fastly.deb.debian.org/debian buster/main i386 libtool all 2.4.6-9 [547 kB] Get: 19 http://cdn-fastly.deb.debian.org/debian buster/main i386 dh-autoreconf all 19 [16.9 kB] Get: 20 http://cdn-fastly.deb.debian.org/debian buster/main i386 libarchive-zip-perl all 1.64-1 [96.8 kB] Get: 21 http://cdn-fastly.deb.debian.org/debian buster/main i386 libfile-stripnondeterminism-perl all 1.1.2-1 [19.8 kB] Get: 22 http://cdn-fastly.deb.debian.org/debian buster/main i386 dh-strip-nondeterminism all 1.1.2-1 [13.0 kB] Get: 23 http://cdn-fastly.deb.debian.org/debian buster/main i386 libelf1 i386 0.176-1.1 [166 kB] Get: 24 http://cdn-fastly.deb.debian.org/debian buster/main i386 dwz i386 0.12-3 [81.4 kB] Get: 25 http://cdn-fastly.deb.debian.org/debian buster/main i386 libglib2.0-0 i386 2.58.3-2 [1333 kB] Get: 26 http://cdn-fastly.deb.debian.org/debian buster/main i386 libicu63 i386 63.1-6 [8443 kB] Get: 27 http://cdn-fastly.deb.debian.org/debian buster/main i386 libxml2 i386 2.9.4+dfsg1-7+b3 [721 kB] Get: 28 http://cdn-fastly.deb.debian.org/debian buster/main i386 libcroco3 i386 0.6.12-3 [151 kB] Get: 29 http://cdn-fastly.deb.debian.org/debian buster/main i386 libncurses6 i386 6.1+20181013-2 [109 kB] Get: 30 http://cdn-fastly.deb.debian.org/debian buster/main i386 gettext i386 0.19.8.1-9 [1314 kB] Get: 31 http://cdn-fastly.deb.debian.org/debian buster/main i386 intltool-debian all 0.35.0+20060710.5 [26.8 kB] Get: 32 http://cdn-fastly.deb.debian.org/debian buster/main i386 po-debconf all 1.0.21 [248 kB] Get: 33 http://cdn-fastly.deb.debian.org/debian buster/main i386 debhelper all 12.1.1 [1016 kB] Get: 34 http://cdn-fastly.deb.debian.org/debian buster/main i386 libdbi-perl i386 1.642-1+b1 [779 kB] Get: 35 http://cdn-fastly.deb.debian.org/debian buster/main i386 libltdl7 i386 2.4.6-9 [392 kB] Get: 36 http://cdn-fastly.deb.debian.org/debian buster/main i386 libltdl-dev i386 2.4.6-9 [164 kB] Get: 37 http://cdn-fastly.deb.debian.org/debian buster/main i386 libodbc1 i386 2.3.6-0.1 [236 kB] Get: 38 http://cdn-fastly.deb.debian.org/debian buster/main i386 libsqliteodbc i386 0.9996-1 [87.2 kB] Get: 39 http://cdn-fastly.deb.debian.org/debian buster/main i386 odbcinst1debian2 i386 2.3.6-0.1 [81.0 kB] Get: 40 http://cdn-fastly.deb.debian.org/debian buster/main i386 odbcinst i386 2.3.6-0.1 [48.8 kB] Get: 41 http://cdn-fastly.deb.debian.org/debian buster/main i386 unixodbc-dev i386 2.3.6-0.1 [279 kB] Fetched 21.4 MB in 6s (3629 kB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package libbsd0:i386. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19231 files and directories currently installed.) Preparing to unpack .../00-libbsd0_0.9.1-2_i386.deb ... Unpacking libbsd0:i386 (0.9.1-2) ... Selecting previously unselected package bsdmainutils. Preparing to unpack .../01-bsdmainutils_11.1.2+b1_i386.deb ... Unpacking bsdmainutils (11.1.2+b1) ... Selecting previously unselected package libuchardet0:i386. Preparing to unpack .../02-libuchardet0_0.0.6-3_i386.deb ... Unpacking libuchardet0:i386 (0.0.6-3) ... Selecting previously unselected package groff-base. Preparing to unpack .../03-groff-base_1.22.4-3_i386.deb ... Unpacking groff-base (1.22.4-3) ... Selecting previously unselected package libpipeline1:i386. Preparing to unpack .../04-libpipeline1_1.5.1-2_i386.deb ... Unpacking libpipeline1:i386 (1.5.1-2) ... Selecting previously unselected package man-db. Preparing to unpack .../05-man-db_2.8.5-2_i386.deb ... Unpacking man-db (2.8.5-2) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../06-sensible-utils_0.0.12_all.deb ... Unpacking sensible-utils (0.0.12) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../07-libmagic-mgc_1%3a5.35-4_i386.deb ... Unpacking libmagic-mgc (1:5.35-4) ... Selecting previously unselected package libmagic1:i386. Preparing to unpack .../08-libmagic1_1%3a5.35-4_i386.deb ... Unpacking libmagic1:i386 (1:5.35-4) ... Selecting previously unselected package file. Preparing to unpack .../09-file_1%3a5.35-4_i386.deb ... Unpacking file (1:5.35-4) ... Selecting previously unselected package gettext-base. Preparing to unpack .../10-gettext-base_0.19.8.1-9_i386.deb ... Unpacking gettext-base (0.19.8.1-9) ... Selecting previously unselected package libsigsegv2:i386. Preparing to unpack .../11-libsigsegv2_2.12-2_i386.deb ... Unpacking libsigsegv2:i386 (2.12-2) ... Selecting previously unselected package m4. Preparing to unpack .../12-m4_1.4.18-2_i386.deb ... Unpacking m4 (1.4.18-2) ... Selecting previously unselected package autoconf. Preparing to unpack .../13-autoconf_2.69-11_all.deb ... Unpacking autoconf (2.69-11) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../14-autotools-dev_20180224.1_all.deb ... Unpacking autotools-dev (20180224.1) ... Selecting previously unselected package automake. Preparing to unpack .../15-automake_1%3a1.16.1-4_all.deb ... Unpacking automake (1:1.16.1-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../16-autopoint_0.19.8.1-9_all.deb ... Unpacking autopoint (0.19.8.1-9) ... Selecting previously unselected package libtool. Preparing to unpack .../17-libtool_2.4.6-9_all.deb ... Unpacking libtool (2.4.6-9) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../18-dh-autoreconf_19_all.deb ... Unpacking dh-autoreconf (19) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../19-libarchive-zip-perl_1.64-1_all.deb ... Unpacking libarchive-zip-perl (1.64-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../20-libfile-stripnondeterminism-perl_1.1.2-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.1.2-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../21-dh-strip-nondeterminism_1.1.2-1_all.deb ... Unpacking dh-strip-nondeterminism (1.1.2-1) ... Selecting previously unselected package libelf1:i386. Preparing to unpack .../22-libelf1_0.176-1.1_i386.deb ... Unpacking libelf1:i386 (0.176-1.1) ... Selecting previously unselected package dwz. Preparing to unpack .../23-dwz_0.12-3_i386.deb ... Unpacking dwz (0.12-3) ... Selecting previously unselected package libglib2.0-0:i386. Preparing to unpack .../24-libglib2.0-0_2.58.3-2_i386.deb ... Unpacking libglib2.0-0:i386 (2.58.3-2) ... Selecting previously unselected package libicu63:i386. Preparing to unpack .../25-libicu63_63.1-6_i386.deb ... Unpacking libicu63:i386 (63.1-6) ... Selecting previously unselected package libxml2:i386. Preparing to unpack .../26-libxml2_2.9.4+dfsg1-7+b3_i386.deb ... Unpacking libxml2:i386 (2.9.4+dfsg1-7+b3) ... Selecting previously unselected package libcroco3:i386. Preparing to unpack .../27-libcroco3_0.6.12-3_i386.deb ... Unpacking libcroco3:i386 (0.6.12-3) ... Selecting previously unselected package libncurses6:i386. Preparing to unpack .../28-libncurses6_6.1+20181013-2_i386.deb ... Unpacking libncurses6:i386 (6.1+20181013-2) ... Selecting previously unselected package gettext. Preparing to unpack .../29-gettext_0.19.8.1-9_i386.deb ... Unpacking gettext (0.19.8.1-9) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../30-intltool-debian_0.35.0+20060710.5_all.deb ... Unpacking intltool-debian (0.35.0+20060710.5) ... Selecting previously unselected package po-debconf. Preparing to unpack .../31-po-debconf_1.0.21_all.deb ... Unpacking po-debconf (1.0.21) ... Selecting previously unselected package debhelper. Preparing to unpack .../32-debhelper_12.1.1_all.deb ... Unpacking debhelper (12.1.1) ... Selecting previously unselected package libdbi-perl:i386. Preparing to unpack .../33-libdbi-perl_1.642-1+b1_i386.deb ... Unpacking libdbi-perl:i386 (1.642-1+b1) ... Selecting previously unselected package libltdl7:i386. Preparing to unpack .../34-libltdl7_2.4.6-9_i386.deb ... Unpacking libltdl7:i386 (2.4.6-9) ... Selecting previously unselected package libltdl-dev:i386. Preparing to unpack .../35-libltdl-dev_2.4.6-9_i386.deb ... Unpacking libltdl-dev:i386 (2.4.6-9) ... Selecting previously unselected package libodbc1:i386. Preparing to unpack .../36-libodbc1_2.3.6-0.1_i386.deb ... Unpacking libodbc1:i386 (2.3.6-0.1) ... Selecting previously unselected package libsqliteodbc:i386. Preparing to unpack .../37-libsqliteodbc_0.9996-1_i386.deb ... Unpacking libsqliteodbc:i386 (0.9996-1) ... Selecting previously unselected package odbcinst1debian2:i386. Preparing to unpack .../38-odbcinst1debian2_2.3.6-0.1_i386.deb ... Unpacking odbcinst1debian2:i386 (2.3.6-0.1) ... Selecting previously unselected package odbcinst. Preparing to unpack .../39-odbcinst_2.3.6-0.1_i386.deb ... Unpacking odbcinst (2.3.6-0.1) ... Selecting previously unselected package unixodbc-dev:i386. Preparing to unpack .../40-unixodbc-dev_2.3.6-0.1_i386.deb ... Unpacking unixodbc-dev:i386 (2.3.6-0.1) ... Setting up libpipeline1:i386 (1.5.1-2) ... Setting up libmagic-mgc (1:5.35-4) ... Setting up libarchive-zip-perl (1.64-1) ... Setting up libglib2.0-0:i386 (2.58.3-2) ... No schema files found: doing nothing. Setting up libmagic1:i386 (1:5.35-4) ... Setting up gettext-base (0.19.8.1-9) ... Setting up file (1:5.35-4) ... Setting up libicu63:i386 (63.1-6) ... Setting up autotools-dev (20180224.1) ... Setting up libncurses6:i386 (6.1+20181013-2) ... Setting up libsigsegv2:i386 (2.12-2) ... Setting up autopoint (0.19.8.1-9) ... Setting up libltdl7:i386 (2.4.6-9) ... Setting up sensible-utils (0.0.12) ... Setting up libuchardet0:i386 (0.0.6-3) ... Setting up libsqliteodbc:i386 (0.9996-1) ... odbcinst: Driver installed. Usage count increased to 1. Target directory is /etc odbcinst: Driver installed. Usage count increased to 1. Target directory is /etc Setting up libbsd0:i386 (0.9.1-2) ... Setting up libelf1:i386 (0.176-1.1) ... Setting up libxml2:i386 (2.9.4+dfsg1-7+b3) ... Setting up libdbi-perl:i386 (1.642-1+b1) ... Setting up libfile-stripnondeterminism-perl (1.1.2-1) ... Setting up libtool (2.4.6-9) ... Setting up m4 (1.4.18-2) ... Setting up bsdmainutils (11.1.2+b1) ... update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode Setting up libcroco3:i386 (0.6.12-3) ... Setting up libodbc1:i386 (2.3.6-0.1) ... Setting up autoconf (2.69-11) ... Setting up dwz (0.12-3) ... Setting up groff-base (1.22.4-3) ... Setting up automake (1:1.16.1-4) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up gettext (0.19.8.1-9) ... Setting up man-db (2.8.5-2) ... Not building database; man-db/auto-update is not 'true'. Setting up intltool-debian (0.35.0+20060710.5) ... Setting up libltdl-dev:i386 (2.4.6-9) ... Setting up po-debconf (1.0.21) ... Setting up odbcinst (2.3.6-0.1) ... Setting up debhelper (12.1.1) ... Setting up dh-autoreconf (19) ... Setting up dh-strip-nondeterminism (1.1.2-1) ... Setting up odbcinst1debian2:i386 (2.3.6-0.1) ... Setting up unixodbc-dev:i386 (2.3.6-0.1) ... Processing triggers for libc-bin (2.28-10) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.23-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/libdbd-odbc-perl-1.60/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b dpkg-buildpackage: info: source package libdbd-odbc-perl dpkg-buildpackage: info: source version 1.60-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Xavier Guimard dpkg-source --before-build . dpkg-buildpackage: info: host architecture i386 fakeroot debian/rules clean dh clean --with perl_dbi dh_clean debian/rules build dh build --with perl_dbi dh_update_autotools_config dh_autoreconf debian/rules override_dh_auto_configure make[1]: Entering directory '/build/libdbd-odbc-perl-1.60' PERL_DBD_ODBC_PREFER_UNIXODBC=1 dh_auto_configure perl -I. Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -ffile-prefix-map=/build/libdbd-odbc-perl-1.60=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2" "LD=i686-linux-gnu-gcc -g -O2 -ffile-prefix-map=/build/libdbd-odbc-perl-1.60=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now" ********** Remember to actually *READ* the README file! And re-read it if you have any problems. ********** OSNAME: linux LANG: C ODBCHOME: LD_LIBRARY_PATH: /usr/lib/libeatmydata DBROOT: WINDIR: II_SYSTEM: DBD_ODBC_UNICODE: Perl: 5.028001 ExtUtils::MakeMaker: 7.34 Command line options: x! = undef g! = 0 e! = undef u! = undef w! = undef o=s = You are using a Perl configured with threading enabled. Please read the warnings in DBI about this. You should also be aware that on non-Windows platforms ODBC drivers come in two forms, thread-safe and non-thread-safe drivers and you may need to make sure you are using the right one. Press return to continue... Looking for odbc_config in : nowhere Looking for odbc_config in (PATH) /usr/sbin:/usr/bin:/sbin:/bin:/usr/games odbc_config not found Looking for iodbc-config in PATH /usr/sbin:/usr/bin:/sbin:/bin:/usr/games iodbc_config not found odbc_config not found - ok, there are other things I can do Still trying to guess ODBCHOME - looking for headers now trying /usr/include Found sql.h, sqlext.h, sqltypes.h in /usr/include Using ODBCHOME /usr Looking for unixODBC libs in /usr/lib Looking for unixODBC libs in /usr/local/lib Looking for unixODBC libs in /usr/lib/gcc/i686-linux-gnu/8/include-fixed Looking for unixODBC libs in /usr/include/i386-linux-gnu Looking for unixODBC libs in /usr/lib Looking for unixODBC libs in /lib/i386-linux-gnu Looking for unixODBC libs in /lib/../lib Looking for unixODBC libs in /usr/lib/i386-linux-gnu Found unixODBC libs /usr/lib/i386-linux-gnu/libodbc.a,/usr/lib/i386-linux-gnu/libodbc.so,/usr/lib/i386-linux-gnu/libodbc.so.1,/usr/lib/i386-linux-gnu/libodbc.so.2,/usr/lib/i386-linux-gnu/libodbc.so.2.0.0,/usr/lib/i386-linux-gnu/libodbccr.a,/usr/lib/i386-linux-gnu/libodbccr.so,/usr/lib/i386-linux-gnu/libodbccr.so.1,/usr/lib/i386-linux-gnu/libodbccr.so.2,/usr/lib/i386-linux-gnu/libodbccr.so.2.0.0,/usr/lib/i386-linux-gnu/libodbcinst.a,/usr/lib/i386-linux-gnu/libodbcinst.so,/usr/lib/i386-linux-gnu/libodbcinst.so.1,/usr/lib/i386-linux-gnu/libodbcinst.so.2,/usr/lib/i386-linux-gnu/libodbcinst.so.2.0.0 in /usr/lib/i386-linux-gnu This looks like a unixodbc type of driver manager. Looking for odbcinst Found odbcinst in /usr/bin odbcinst -j reports: unixODBC 2.3.6 DRIVERS............: /etc/odbcinst.ini SYSTEM DATA SOURCES: /etc/odbc.ini FILE DATA SOURCES..: /etc/ODBCDataSources USER DATA SOURCES..: /nonexistent/first-build/.odbc.ini SQLULEN Size.......: 4 SQLLEN Size........: 4 SQLSETPOSIROW Size.: 2 Please note these files as they are where you define your ODBC drivers and data sources. Looking for odbc_config to get cflags odbc_config not found - ok Warning: LD_LIBRARY_PATH=/usr/lib/libeatmydata doesn't include /usr/lib/i386-linux-gnu Checking if your kit is complete... Looks good Warning: prerequisite Test::Output 1.031 not found. Using DBI 1.642 (for perl 5.028001 on i686-linux-gnu-thread-multi-64int) installed in /usr/lib/i386-linux-gnu/perl5/5.28/auto/DBI/ Using DBI 1.642 (for perl 5.028001 on i686-linux-gnu-thread-multi-64int) installed in /usr/lib/i386-linux-gnu/perl5/5.28/auto/DBI/ Generating a Unix-style Makefile Writing Makefile for DBD::ODBC Writing MYMETA.yml and MYMETA.json Warning: not all required environment variables are set. Warning: Will not be able to run tests as you have not defined all of DBI_DSN, DBI_USER and DBI_PASS environment variables. make[1]: Leaving directory '/build/libdbd-odbc-perl-1.60' dh_auto_build make -j18 make[1]: Entering directory '/build/libdbd-odbc-perl-1.60' Running Mkbootstrap for ODBC () i686-linux-gnu-gcc -c -I/usr/include -I. -I/usr/lib/i386-linux-gnu/perl5/5.28/auto/DBI -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -ffile-prefix-map=/build/libdbd-odbc-perl-1.60=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"1.60\" -DXS_VERSION=\"1.60\" -fPIC "-I/usr/lib/i386-linux-gnu/perl/5.28/CORE" -I/usr/include ConvertUTF.c "/usr/bin/perl" -p -e "s/~DRIVER~/ODBC/g" /usr/lib/i386-linux-gnu/perl5/5.28/auto/DBI/Driver.xst > ODBC.xsi i686-linux-gnu-gcc -c -I/usr/include -I. -I/usr/lib/i386-linux-gnu/perl5/5.28/auto/DBI -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -ffile-prefix-map=/build/libdbd-odbc-perl-1.60=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"1.60\" -DXS_VERSION=\"1.60\" -fPIC "-I/usr/lib/i386-linux-gnu/perl/5.28/CORE" -I/usr/include dbdimp.c i686-linux-gnu-gcc -c -I/usr/include -I. -I/usr/lib/i386-linux-gnu/perl5/5.28/auto/DBI -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -ffile-prefix-map=/build/libdbd-odbc-perl-1.60=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"1.60\" -DXS_VERSION=\"1.60\" -fPIC "-I/usr/lib/i386-linux-gnu/perl/5.28/CORE" -I/usr/include unicode_helper.c "/usr/bin/perl" "/usr/share/perl/5.28/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.28/ExtUtils/typemap' ODBC.xs > ODBC.xsc chmod 644 "ODBC.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- ODBC.bs blib/arch/auto/DBD/ODBC/ODBC.bs 644 cp TO_DO blib/lib/DBD/ODBC/TO_DO.pm cp Changes blib/lib/DBD/ODBC/Changes.pm cp FAQ blib/lib/DBD/ODBC/FAQ.pm cp ODBC.pm blib/lib/DBD/ODBC.pm mv ODBC.xsc ODBC.c i686-linux-gnu-gcc -c -I/usr/include -I. -I/usr/lib/i386-linux-gnu/perl5/5.28/auto/DBI -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -ffile-prefix-map=/build/libdbd-odbc-perl-1.60=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"1.60\" -DXS_VERSION=\"1.60\" -fPIC "-I/usr/lib/i386-linux-gnu/perl/5.28/CORE" -I/usr/include ODBC.c In file included from /usr/lib/i386-linux-gnu/perl5/5.28/auto/DBI/DBIXS.h:38, from ODBC.h:12, from dbdimp.c:44: /usr/lib/i386-linux-gnu/perl5/5.28/auto/DBI/dbipport.h:4471: warning: "WIDEST_UTYPE" redefined # define WIDEST_UTYPE U64TYPE In file included from /usr/lib/i386-linux-gnu/perl/5.28/CORE/perl.h:2465, from /usr/lib/i386-linux-gnu/perl5/5.28/auto/DBI/DBIXS.h:23, from ODBC.h:12, from dbdimp.c:44: /usr/lib/i386-linux-gnu/perl/5.28/CORE/handy.h:1064: note: this is the location of the previous definition # define WIDEST_UTYPE U64 dbdimp.c: In function 'odbc_set_query_timeout': dbdimp.c:195:24: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] (SQLPOINTER)odbc_timeout,(SQLINTEGER)SQL_IS_INTEGER); ^ dbdimp.c: In function 'odbc_st_prepare_sv': dbdimp.c:2154:32: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] (SQLPOINTER)SvIV(*attr_sv), SQL_NTS); ^ dbdimp.c: In function 'odbc_st_execute_iv': dbdimp.c:82:55: warning: format '%Ld' expects argument of type 'long long int', but argument 4 has type 'SQLINTEGER' {aka 'long int'} [-Wformat=] #define TRACE2(a,b,c,d) PerlIO_printf(DBIc_LOGPIO(a), (b), (c), (d)) ^~~ ~~~ dbdimp.c:3172:9: note: in expansion of macro 'TRACE2' TRACE2(imp_dbh, " -dbd_st_execute_iv(%p)=%"IVdf"\n", sth, ret); ^~~~~~ dbdimp.c: In function 'odbc_db_STORE_attrib': dbdimp.c:4740:18: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] vParam = (SQLPOINTER)SvIV(valuesv); ^ dbdimp.c: In function 'set_odbc_version': dbdimp.c:6499:28: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] (SQLPOINTER)odbc_version, SQL_IS_INTEGER); ^ dbdimp.c: In function 'post_connect': dbdimp.c:6806:36: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] (SQLPOINTER)odbc_cursortype, ^ dbdimp.c: In function 'odbc_st_execute_for_fetch': dbdimp.c:7325:25: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] (SQLPOINTER)count, 0); ^ In file included from /usr/lib/i386-linux-gnu/perl5/5.28/auto/DBI/DBIXS.h:38, from ODBC.h:12, from ODBC.xs:1: /usr/lib/i386-linux-gnu/perl5/5.28/auto/DBI/dbipport.h:4471: warning: "WIDEST_UTYPE" redefined # define WIDEST_UTYPE U64TYPE In file included from /usr/lib/i386-linux-gnu/perl/5.28/CORE/perl.h:2465, from /usr/lib/i386-linux-gnu/perl5/5.28/auto/DBI/DBIXS.h:23, from ODBC.h:12, from ODBC.xs:1: /usr/lib/i386-linux-gnu/perl/5.28/CORE/handy.h:1064: note: this is the location of the previous definition # define WIDEST_UTYPE U64 rm -f blib/arch/auto/DBD/ODBC/ODBC.so i686-linux-gnu-gcc -g -O2 -ffile-prefix-map=/build/libdbd-odbc-perl-1.60=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong ConvertUTF.o ODBC.o dbdimp.o unicode_helper.o -o blib/arch/auto/DBD/ODBC/ODBC.so \ -L/usr/lib/i386-linux-gnu -lodbc \ chmod 755 blib/arch/auto/DBD/ODBC/ODBC.so Manifying 1 pod document make[1]: Leaving directory '/build/libdbd-odbc-perl-1.60' debian/rules override_dh_auto_test make[1]: Entering directory '/build/libdbd-odbc-perl-1.60' DBI_DSN=dbi:ODBC:"DRIVER=SQLite3;database=/tmp/tmp.eHLGyO1bqX" dh_auto_test make -j18 test TEST_VERBOSE=1 make[2]: Entering directory '/build/libdbd-odbc-perl-1.60' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- ODBC.bs blib/arch/auto/DBD/ODBC/ODBC.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/01base.t ................... 1..6 ok 1 - require DBI; ok 2 - import DBI ok 3 - DBI->internal is DBI::dr ok 4 - install ODBC ok 5 - Install ODBC driver OK ok 6 - Version is not empty ok # # Perl 5.28.1 # osname=linux, osvers=4.9.0, archname=i686-linux-gnu-thread-multi-64int # Using DBI 1.642 # Using DBD::ODBC 1.60 # Using DBMS_NAME 'SQLite' # Using DBMS_VER '3.24.0' # Using DRIVER_NAME 'sqlite3odbc.so' # Using DRIVER_VER '0.9996' # odbc_has_unicode # AA: # DBD::ODBC::db STORE warning: [SQLite]option value changed at t/02simple.t line 59. # Your ODBC driver does not support setting ReadOnly t/02simple.t ................. 1..65 ok 1 - use DBI; ok 2 - use ODBCTEST; ok 3 - ReadOnly set ok 4 - ReadOnly cleared ok 5 - dbc private_attribute_info result ok 6 - dbc private_attribute_info is hashref ok 7 - dbc private_attribute_info has some attributes ok 8 - stmt private_attribute_info result ok 9 - stmt private_attribute_info is hashref ok 10 - stmt private_attribute_info has some attributes ok 11 - Set Auto commit off ok 12 - Auto commit off retrieved ok 13 - Set Auto commit on ok 14 - Auto commit on restored ok 15 - create test table ok 16 - test table exists ok 17 - insert test data ok 18 - NUM_OF_FIELDS ok 19 - NAME returns right number of columns ok 20 - column name for column 1 ok 21 - column name for column 2 ok 22 - column name for column 3 ok 23 - column name for column 4 ok 24 - long strings compare ok 25 - long strings compare 255 ok 26 - select test data ok 27 - Get LongReadLen starting value ok 28 - LongReadLen is numeric ok 29 - Set LongReadLen ok 30 - Read changed LongReadLen back ok 31 - Get LongTruncOk starting value ok 32 - Set LongTruncOk on ok 33 - LongTruncOk on ok 34 - Set Print Error ok 35 - Select Long data, LongTruncOk ok 36 - err not set on LongTruncOk handle ok 37 - Truncated column to LongReadLen ok 38 - Set Long TruncOk 0 ok 39 - Select Long Data failure ok 40 - error set on truncated handle ok 41 - errstr set on truncated handle ok 42 - state set on truncated handle ok 43 - prepare select from table ok 44 - Execute select ok 45 - NUM_OF_FIELDS = ColAttributes(SQL_COLUMN_COUNT) ok 46 - Col count matches correct col count ok 47 - Set RaiseError 0 ok 48 - Set PrintError 0 ok 49 - Error reported on bad query ok 50 - date check select ok 51 - date check execute ok 52 - date check rows ok 53 - group by query prepare ok 54 - group by query execute ok 55 - group by query returned rows ok 56 - data sources test ok 57 - test ping method ok 58 - Attrib odbc_ignore_named_placeholders 0 to start ok 59 - Attrib odbc_ignore_named_placeholders set to 1 ok 60 - test connecting twice to the same database ok 61 - database name is returned successfully ok 62 - automatically finish when execute run again ok 63 # skip DSN already contains DRIVER= or DSN= ok 64 # skip DSN already contains DRIVER= or DSN= ok 65 # skip DSN already contains DRIVER= or DSN= ok # # N.B. Some drivers (postgres/cache) may return ODBC 2.0 column names for the SQLTables result-set e.g. TABLE_QUALIFIER instead of TABLE_CAT t/03dbatt.t .................. 1..30 ok 1 - use DBI; ok 2 - use ODBCTEST; ok 3 - Set Long Read Len ok 4 - Create tables ok 5 - AutoCommit set on dbh ok 6 - commitTest with AutoCommit ok 7 - AutoCommit turned off ok 8 - commitTest with AutoCommit off ok 9 - Ensure autocommit back on ok 10 - 'sth {NAME} returns ref to array' isa 'ARRAY' ok 11 - Column test for table_info 0 ok 12 - Column test for table_info 1 ok 13 - Column test for table_info 2 ok 14 - Column test for table_info 3 ok 15 - Column test for table_info 4 ok 16 - must be some tables out there? ok 17 - tables returns array ok 18 - column info returns a row for test table perl_dbd_test ok 19 - primary key count ok 20 - prepare update statement returns valid sth ok 21 - update statement has 0 columns returned ok 22 - update statement has 0 columns returned 2 ok 23 - verify default dbh odbc_query_timeout = 0 ok 24 - verify default sth odbc_query_timeout = 0 ok 25 - Verify odbc_query_timeout set ok ok 26 - verify dbh setting for query_timeout passed to sth ok 27 - verify sth query_timeout can be overridden ok 28 - verify default for odbc_column_display_size ok 29 - set odbc_column_display_size ok 30 - verify changed odbc_column_display_size ok t/05meth.t ................... 1..16 ok 1 - use DBI; ok 2 - use ODBCTEST; ok 3 - Create tables ok 4 - delete prepared statement ok 5 - Number of rows >= 0 ok 6 - Number of rows from DBI matches sth ok 7 - finished and rolled back ok 8 - no error ok 9 ok 10 - ? ok 11 - ?? ok 12 - Active ok 13 - ping ok 14 - disconnect ok 15 - Active ok 16 - ping ok t/07bind.t ................... 1..25 ok 1 - use ODBCTEST; ok 2 - Create tables ok 3 - Table insert test ok 4 - Ensure long readlen set correctly ok 5 - Select tests ok 6 - Insert with bind tests ok 7 - select long test data ok 8 - update long test data ok 9 - select long test data again ok 10 - ParamValues returns a hash ref ok 11 - ParamValues test integer ok 12 - Paramvalues test string ok 13 - ParamValues returns a hash ref ok 14 - p1 exists ok 15 - p2 exists ok 16 - p1 is a hash reference ok 17 - p2 is a hash reference ok 18 - p1 TYPE exists ok 19 - p2 TYPE exists ok 20 - numeric SQL type on p1 ok 21 - numeric SQL type on p2 ok 22 - insert with numbered placeholders ok 23 - ...inserted one row ok 24 - insert with named placeholders ok 25 - ...inserted one row ok t/08bind2.t .................. 1..6 ok 1 - use ODBCTEST; ok 2 - use Data::Dumper; ok 3 - Create tables ok 4 - insert \#1 various test data no dates, no long data ok 5 - insert \#2 various test data no dates, with long data ok 6 - insert \#3 various test data data with dates ok t/09multi.t .................. 1..7 ok 1 - use strict; ok 2 - use DBI; ok 3 - use ODBCTEST; ok 4 # skip Multiple statements not supported using SQLite (SQL_MULT_RESULT_SETS) ok 5 # skip Multiple statements not supported using SQLite (SQL_MULT_RESULT_SETS) ok 6 # skip Multiple statements not supported using SQLite (SQL_MULT_RESULT_SETS) ok 7 # skip Multiple statements not supported using SQLite (SQL_MULT_RESULT_SETS) ok t/10handler.t ................ 1..10 ok 1 - use ODBCTEST; ok 2 - Error handler called ok 3 - Error handler called - state seen ok 4 - Error handler called - message seen ok 5 - Error handler called - native seen ok 6 - Error handler called - error passed on ok 7 - Error handler called - error propagated ok 8 - Handler cancelled ok 9 - Handler filtered all messages ok 10 - eval complete ok t/12blob.t ................... 1..24 ok 1 - use ODBCTEST; ok 2 - default putdata_start ok 3 - type_info_all ok 4 - table DBD_ODBC_drop_me created ok 5 - prepare for insert ok 6 - insert clob ok 7 - select test data back ok 8 - sizes of insert/select compare ok 9 - data read back compares ok 10 - delete records from test table ok 11 - retrieved putdata_start = set value ok 12 - prepare for insert ok 13 - insert clob ok 14 - select test data back ok 15 - sizes of insert/select compare ok 16 - data read back compares ok 17 - delete records from test table ok 18 - retrieved putdata_start = set value ok 19 - prepare for insert ok 20 - insert clob ok 21 - select test data back ok 22 - sizes of insert/select compare ok 23 - data read back compares ok 24 - delete records from test table ok t/20SqlServer.t .............. 1..67 ok 1 - use ODBCTEST; ok 2 # skip Microsoft SQL Server tests not supported using SQLite ok 3 # skip Microsoft SQL Server tests not supported using SQLite ok 4 # skip Microsoft SQL Server tests not supported using SQLite ok 5 # skip Microsoft SQL Server tests not supported using SQLite ok 6 # skip Microsoft SQL Server tests not supported using SQLite ok 7 # skip Microsoft SQL Server tests not supported using SQLite ok 8 # skip Microsoft SQL Server tests not supported using SQLite ok 9 # skip Microsoft SQL Server tests not supported using SQLite ok 10 # skip Microsoft SQL Server tests not supported using SQLite ok 11 # skip Microsoft SQL Server tests not supported using SQLite ok 12 # skip Microsoft SQL Server tests not supported using SQLite ok 13 # skip Microsoft SQL Server tests not supported using SQLite ok 14 # skip Microsoft SQL Server tests not supported using SQLite ok 15 # skip Microsoft SQL Server tests not supported using SQLite ok 16 # skip Microsoft SQL Server tests not supported using SQLite ok 17 # skip Microsoft SQL Server tests not supported using SQLite ok 18 # skip Microsoft SQL Server tests not supported using SQLite ok 19 # skip Microsoft SQL Server tests not supported using SQLite ok 20 # skip Microsoft SQL Server tests not supported using SQLite ok 21 # skip Microsoft SQL Server tests not supported using SQLite ok 22 # skip Microsoft SQL Server tests not supported using SQLite ok 23 # skip Microsoft SQL Server tests not supported using SQLite ok 24 # skip Microsoft SQL Server tests not supported using SQLite ok 25 # skip Microsoft SQL Server tests not supported using SQLite ok 26 # skip Microsoft SQL Server tests not supported using SQLite ok 27 # skip Microsoft SQL Server tests not supported using SQLite ok 28 # skip Microsoft SQL Server tests not supported using SQLite ok 29 # skip Microsoft SQL Server tests not supported using SQLite ok 30 # skip Microsoft SQL Server tests not supported using SQLite ok 31 # skip Microsoft SQL Server tests not supported using SQLite ok 32 # skip Microsoft SQL Server tests not supported using SQLite ok 33 # skip Microsoft SQL Server tests not supported using SQLite ok 34 # skip Microsoft SQL Server tests not supported using SQLite ok 35 # skip Microsoft SQL Server tests not supported using SQLite ok 36 # skip Microsoft SQL Server tests not supported using SQLite ok 37 # skip Microsoft SQL Server tests not supported using SQLite ok 38 # skip Microsoft SQL Server tests not supported using SQLite ok 39 # skip Microsoft SQL Server tests not supported using SQLite ok 40 # skip Microsoft SQL Server tests not supported using SQLite ok 41 # skip Microsoft SQL Server tests not supported using SQLite ok 42 # skip Microsoft SQL Server tests not supported using SQLite ok 43 # skip Microsoft SQL Server tests not supported using SQLite ok 44 # skip Microsoft SQL Server tests not supported using SQLite ok 45 # skip Microsoft SQL Server tests not supported using SQLite ok 46 # skip Microsoft SQL Server tests not supported using SQLite ok 47 # skip Microsoft SQL Server tests not supported using SQLite ok 48 # skip Microsoft SQL Server tests not supported using SQLite ok 49 # skip Microsoft SQL Server tests not supported using SQLite ok 50 # skip Microsoft SQL Server tests not supported using SQLite ok 51 # skip Microsoft SQL Server tests not supported using SQLite ok 52 # skip Microsoft SQL Server tests not supported using SQLite ok 53 # skip Microsoft SQL Server tests not supported using SQLite ok 54 # skip Microsoft SQL Server tests not supported using SQLite ok 55 # skip Microsoft SQL Server tests not supported using SQLite ok 56 # skip Microsoft SQL Server tests not supported using SQLite ok 57 # skip Microsoft SQL Server tests not supported using SQLite ok 58 # skip Microsoft SQL Server tests not supported using SQLite ok 59 # skip Microsoft SQL Server tests not supported using SQLite ok 60 # skip Microsoft SQL Server tests not supported using SQLite ok 61 # skip Microsoft SQL Server tests not supported using SQLite ok 62 # skip Microsoft SQL Server tests not supported using SQLite ok 63 # skip Microsoft SQL Server tests not supported using SQLite ok 64 # skip Microsoft SQL Server tests not supported using SQLite ok 65 # skip Microsoft SQL Server tests not supported using SQLite ok 66 # skip Microsoft SQL Server tests not supported using SQLite ok 67 # skip Microsoft SQL Server tests not supported using SQLite ok t/30Oracle.t ................. 1..4 ok 1 - use ODBCTEST; ok 2 # skip Oracle tests not supported using SQLite ok 3 # skip Oracle tests not supported using SQLite ok 4 # skip Oracle tests not supported using SQLite ok t/40UnicodeRoundTrip.t ....... 1..61 ok 1 - DBI connect ok 2 # skip Unicode-specific tests disabled - not a unicode build ok 3 # skip Unicode-specific tests disabled - not a unicode build ok 4 # skip Unicode-specific tests disabled - not a unicode build ok 5 # skip Unicode-specific tests disabled - not a unicode build ok 6 # skip Unicode-specific tests disabled - not a unicode build ok 7 # skip Unicode-specific tests disabled - not a unicode build ok 8 # skip Unicode-specific tests disabled - not a unicode build ok 9 # skip Unicode-specific tests disabled - not a unicode build ok 10 # skip Unicode-specific tests disabled - not a unicode build ok 11 # skip Unicode-specific tests disabled - not a unicode build ok 12 # skip Unicode-specific tests disabled - not a unicode build ok 13 # skip Unicode-specific tests disabled - not a unicode build ok 14 # skip Unicode-specific tests disabled - not a unicode build ok 15 # skip Unicode-specific tests disabled - not a unicode build ok 16 # skip Unicode-specific tests disabled - not a unicode build ok 17 # skip Unicode-specific tests disabled - not a unicode build ok 18 # skip Unicode-specific tests disabled - not a unicode build ok 19 # skip Unicode-specific tests disabled - not a unicode build ok 20 # skip Unicode-specific tests disabled - not a unicode build ok 21 # skip Unicode-specific tests disabled - not a unicode build ok 22 # skip Unicode-specific tests disabled - not a unicode build ok 23 # skip Unicode-specific tests disabled - not a unicode build ok 24 # skip Unicode-specific tests disabled - not a unicode build ok 25 # skip Unicode-specific tests disabled - not a unicode build ok 26 # skip Unicode-specific tests disabled - not a unicode build ok 27 # skip Unicode-specific tests disabled - not a unicode build ok 28 # skip Unicode-specific tests disabled - not a unicode build ok 29 # skip Unicode-specific tests disabled - not a unicode build ok 30 # skip Unicode-specific tests disabled - not a unicode build ok 31 # skip Unicode-specific tests disabled - not a unicode build ok 32 # skip Unicode-specific tests disabled - not a unicode build ok 33 # skip Unicode-specific tests disabled - not a unicode build ok 34 # skip Unicode-specific tests disabled - not a unicode build ok 35 # skip Unicode-specific tests disabled - not a unicode build ok 36 # skip Unicode-specific tests disabled - not a unicode build ok 37 # skip Unicode-specific tests disabled - not a unicode build ok 38 # skip Unicode-specific tests disabled - not a unicode build ok 39 # skip Unicode-specific tests disabled - not a unicode build ok 40 # skip Unicode-specific tests disabled - not a unicode build ok 41 # skip Unicode-specific tests disabled - not a unicode build ok 42 # skip Unicode-specific tests disabled - not a unicode build ok 43 # skip Unicode-specific tests disabled - not a unicode build ok 44 # skip Unicode-specific tests disabled - not a unicode build ok 45 # skip Unicode-specific tests disabled - not a unicode build ok 46 # skip Unicode-specific tests disabled - not a unicode build ok 47 # skip Unicode-specific tests disabled - not a unicode build ok 48 # skip Unicode-specific tests disabled - not a unicode build ok 49 # skip Unicode-specific tests disabled - not a unicode build ok 50 # skip Unicode-specific tests disabled - not a unicode build ok 51 # skip Unicode-specific tests disabled - not a unicode build ok 52 # skip Unicode-specific tests disabled - not a unicode build ok 53 # skip Unicode-specific tests disabled - not a unicode build ok 54 # skip Unicode-specific tests disabled - not a unicode build ok 55 # skip Unicode-specific tests disabled - not a unicode build ok 56 # skip Unicode-specific tests disabled - not a unicode build ok 57 # skip Unicode-specific tests disabled - not a unicode build ok 58 # skip Unicode-specific tests disabled - not a unicode build ok 59 # skip Unicode-specific tests disabled - not a unicode build ok 60 # skip Unicode-specific tests disabled - not a unicode build ok 61 # skip Unicode-specific tests disabled - not a unicode build ok t/41Unicode.t ................ 1..55 ok 1 - DBI connect ok 2 # skip Unicode-specific tests disabled - not a unicode build ok 3 # skip Unicode-specific tests disabled - not a unicode build ok 4 # skip Unicode-specific tests disabled - not a unicode build ok 5 # skip Unicode-specific tests disabled - not a unicode build ok 6 # skip Unicode-specific tests disabled - not a unicode build ok 7 # skip Unicode-specific tests disabled - not a unicode build ok 8 # skip Unicode-specific tests disabled - not a unicode build ok 9 # skip Unicode-specific tests disabled - not a unicode build ok 10 # skip Unicode-specific tests disabled - not a unicode build ok 11 # skip Unicode-specific tests disabled - not a unicode build ok 12 # skip Unicode-specific tests disabled - not a unicode build ok 13 # skip Unicode-specific tests disabled - not a unicode build ok 14 # skip Unicode-specific tests disabled - not a unicode build ok 15 # skip Unicode-specific tests disabled - not a unicode build ok 16 # skip Unicode-specific tests disabled - not a unicode build ok 17 # skip Unicode-specific tests disabled - not a unicode build ok 18 # skip Unicode-specific tests disabled - not a unicode build ok 19 # skip Unicode-specific tests disabled - not a unicode build ok 20 # skip Unicode-specific tests disabled - not a unicode build ok 21 # skip Unicode-specific tests disabled - not a unicode build ok 22 # skip Unicode-specific tests disabled - not a unicode build ok 23 # skip Unicode-specific tests disabled - not a unicode build ok 24 # skip Unicode-specific tests disabled - not a unicode build ok 25 # skip Unicode-specific tests disabled - not a unicode build ok 26 # skip Unicode-specific tests disabled - not a unicode build ok 27 # skip Unicode-specific tests disabled - not a unicode build ok 28 # skip Unicode-specific tests disabled - not a unicode build ok 29 # skip Unicode-specific tests disabled - not a unicode build ok 30 # skip Unicode-specific tests disabled - not a unicode build ok 31 # skip Unicode-specific tests disabled - not a unicode build ok 32 # skip Unicode-specific tests disabled - not a unicode build ok 33 # skip Unicode-specific tests disabled - not a unicode build ok 34 # skip Unicode-specific tests disabled - not a unicode build ok 35 # skip Unicode-specific tests disabled - not a unicode build ok 36 # skip Unicode-specific tests disabled - not a unicode build ok 37 # skip Unicode-specific tests disabled - not a unicode build ok 38 # skip Unicode-specific tests disabled - not a unicode build ok 39 # skip Unicode-specific tests disabled - not a unicode build ok 40 # skip Unicode-specific tests disabled - not a unicode build ok 41 # skip Unicode-specific tests disabled - not a unicode build ok 42 # skip Unicode-specific tests disabled - not a unicode build ok 43 # skip Unicode-specific tests disabled - not a unicode build ok 44 # skip Unicode-specific tests disabled - not a unicode build ok 45 # skip Unicode-specific tests disabled - not a unicode build ok 46 # skip Unicode-specific tests disabled - not a unicode build ok 47 # skip Unicode-specific tests disabled - not a unicode build ok 48 # skip Unicode-specific tests disabled - not a unicode build ok 49 # skip Unicode-specific tests disabled - not a unicode build ok 50 # skip Unicode-specific tests disabled - not a unicode build ok 51 # skip Unicode-specific tests disabled - not a unicode build ok 52 # skip Unicode-specific tests disabled - not a unicode build ok 53 # skip Unicode-specific tests disabled - not a unicode build ok 54 # skip Unicode-specific tests disabled - not a unicode build ok 55 # skip Unicode-specific tests disabled - not a unicode build ok # Driver: sqlite3odbc.so t/45_unicode_varchar.t ....... skipped: Not MS SQL Server t/50_odbc_utf8_on.t .......... 1..3 ok 1 - odbc_utf8_on exists with value=0 ok 2 - odbc_utf8_on is off by default ok 3 - odbc_utf8_on set value=1 ok # # # NOTE: This tests execute_array and execute_for_fetch using DBI's version and not the native DBD::ODBC execute_for_fetch. It should work as it is using nothing special in DBD::ODBC other than the normal methods. t/70execute_array_dbi.t ...... # Using driver ODBC # ***** error handler called ***** # Table dropped ok 1 - create test table # simple tests array_context = 1, raise = 1 # all param arrays the same size # Autocommit: 1 # insert raise = 1, sts = 5, commit = '', affected = 5, array_context = 1, tuple = ARRAY(0x578b5c1c), error = 0 ok 2 - no error in execute_array eval ok 3 - execute_array returned 5 rows executed ok 4 - total affected 5 ok 5 - no error captured ok 6 - 5 rows in tuple_status # $ArrayTupleStatus = [ # 1, # 1, # 1, # 1, # 1 # ]; ok 7 - tuple status is an array ok 8 - status arrays same size ok 9 - row 0 tuple status ok 10 - row 1 tuple status ok 11 - row 2 tuple status ok 12 - row 3 tuple status ok 13 - row 4 tuple status ok 14 - row 0 p1 data ok 15 - row 0 p2 data ok 16 - row 1 p1 data ok 17 - row 1 p2 data ok 18 - row 2 p1 data ok 19 - row 2 p2 data ok 20 - row 3 p1 data ok 21 - row 3 p2 data ok 22 - row 4 p1 data ok 23 - row 4 p2 data # Autocommit: 0 # insert sts = 5, raise = 1, tuple = ARRAY(0x578b5b54), array_context = 1, error = 0, affected = 5, commit = 1 ok 24 - no error in execute_array eval ok 25 - execute_array returned 5 rows executed ok 26 - total affected 5 ok 27 - no error captured ok 28 - 5 rows in tuple_status # $ArrayTupleStatus = [ # 1, # 1, # 1, # 1, # 1 # ]; ok 29 - tuple status is an array ok 30 - status arrays same size ok 31 - row 0 tuple status ok 32 - row 1 tuple status ok 33 - row 2 tuple status ok 34 - row 3 tuple status ok 35 - row 4 tuple status ok 36 - row 0 p1 data ok 37 - row 0 p2 data ok 38 - row 1 p1 data ok 39 - row 1 p2 data ok 40 - row 2 p1 data ok 41 - row 2 p2 data ok 42 - row 3 p1 data ok 43 - row 3 p2 data ok 44 - row 4 p1 data ok 45 - row 4 p2 data # Not all param arrays the same size # insert error = 0, array_context = 1, tuple = ARRAY(0x5790905c), commit = 0, affected = 5, sts = 5, raise = 1 ok 46 - no error in execute_array eval ok 47 - execute_array returned 5 rows executed ok 48 - total affected 5 ok 49 - no error captured ok 50 - 5 rows in tuple_status # $ArrayTupleStatus = [ # 1, # 1, # 1, # 1, # 1 # ]; ok 51 - tuple status is an array ok 52 - status arrays same size ok 53 - row 0 tuple status ok 54 - row 1 tuple status ok 55 - row 2 tuple status ok 56 - row 3 tuple status ok 57 - row 4 tuple status ok 58 - row 0 p1 data ok 59 - row 0 p2 data ok 60 - row 1 p1 data ok 61 - row 1 p2 data ok 62 - row 2 p1 data ok 63 - row 2 p2 data ok 64 - row 3 p1 data ok 65 - row 3 p2 data ok 66 - row 4 p1 data ok 67 - row 4 p2 data # Not all param arrays the same size with bind on execute_array # insert sts = 5, params = ARRAY(0x57909214), raise = 1, tuple = ARRAY(0x57908ff8), array_context = 1, error = 0, affected = 5, commit = 0 ok 68 - no error in execute_array eval ok 69 - execute_array returned 5 rows executed ok 70 - total affected 5 ok 71 - no error captured ok 72 - 5 rows in tuple_status # $ArrayTupleStatus = [ # 1, # 1, # 1, # 1, # 1 # ]; ok 73 - tuple status is an array ok 74 - status arrays same size ok 75 - row 0 tuple status ok 76 - row 1 tuple status ok 77 - row 2 tuple status ok 78 - row 3 tuple status ok 79 - row 4 tuple status ok 80 - row 0 p1 data ok 81 - row 0 p2 data ok 82 - row 1 p1 data ok 83 - row 1 p2 data ok 84 - row 2 p1 data ok 85 - row 2 p2 data ok 86 - row 3 p1 data ok 87 - row 3 p2 data ok 88 - row 4 p1 data ok 89 - row 4 p2 data # no parameters # insert array_context = 1, tuple = ARRAY(0x579090fc), error = 0, commit = 0, affected = 0, sts = '0E0', raise = 1, params = ARRAY(0x57908a30) ok 90 - no error in execute_array eval ok 91 - execute_array returned '0E0' rows executed ok 92 - total affected 0 ok 93 - no error captured ok 94 - 0E0 rows in tuple_status # $ArrayTupleStatus = []; ok 95 - tuple status is an array ok 96 - status arrays same size # simple tests raise = 1, array_context = 0 # all param arrays the same size # Autocommit: 1 # insert sts = 5, raise = 1, array_context = 0, tuple = ARRAY(0x57910dd0), error = 0, commit = '', affected = 5 ok 97 - no error in execute_array eval ok 98 - execute_array returned 5 rows executed ok 99 - no error captured ok 100 - 5 rows in tuple_status # $ArrayTupleStatus = [ # 1, # 1, # 1, # 1, # 1 # ]; ok 101 - tuple status is an array ok 102 - status arrays same size ok 103 - row 0 tuple status ok 104 - row 1 tuple status ok 105 - row 2 tuple status ok 106 - row 3 tuple status ok 107 - row 4 tuple status ok 108 - row 0 p1 data ok 109 - row 0 p2 data ok 110 - row 1 p1 data ok 111 - row 1 p2 data ok 112 - row 2 p1 data ok 113 - row 2 p2 data ok 114 - row 3 p1 data ok 115 - row 3 p2 data ok 116 - row 4 p1 data ok 117 - row 4 p2 data # Autocommit: 0 # insert commit = 1, affected = 5, error = 0, array_context = 0, tuple = ARRAY(0x57910628), raise = 1, sts = 5 ok 118 - no error in execute_array eval ok 119 - execute_array returned 5 rows executed ok 120 - no error captured ok 121 - 5 rows in tuple_status # $ArrayTupleStatus = [ # 1, # 1, # 1, # 1, # 1 # ]; ok 122 - tuple status is an array ok 123 - status arrays same size ok 124 - row 0 tuple status ok 125 - row 1 tuple status ok 126 - row 2 tuple status ok 127 - row 3 tuple status ok 128 - row 4 tuple status ok 129 - row 0 p1 data ok 130 - row 0 p2 data ok 131 - row 1 p1 data ok 132 - row 1 p2 data ok 133 - row 2 p1 data ok 134 - row 2 p2 data ok 135 - row 3 p1 data ok 136 - row 3 p2 data ok 137 - row 4 p1 data ok 138 - row 4 p2 data # Not all param arrays the same size # insert raise = 1, sts = 5, commit = 0, affected = 5, array_context = 0, tuple = ARRAY(0x57915d78), error = 0 ok 139 - no error in execute_array eval ok 140 - execute_array returned 5 rows executed ok 141 - no error captured ok 142 - 5 rows in tuple_status # $ArrayTupleStatus = [ # 1, # 1, # 1, # 1, # 1 # ]; ok 143 - tuple status is an array ok 144 - status arrays same size ok 145 - row 0 tuple status ok 146 - row 1 tuple status ok 147 - row 2 tuple status ok 148 - row 3 tuple status ok 149 - row 4 tuple status ok 150 - row 0 p1 data ok 151 - row 0 p2 data ok 152 - row 1 p1 data ok 153 - row 1 p2 data ok 154 - row 2 p1 data ok 155 - row 2 p2 data ok 156 - row 3 p1 data ok 157 - row 3 p2 data ok 158 - row 4 p1 data ok 159 - row 4 p2 data # Not all param arrays the same size with bind on execute_array # insert affected = 5, commit = 0, error = 0, tuple = ARRAY(0x579179cc), array_context = 0, params = ARRAY(0x5791760c), raise = 1, sts = 5 ok 160 - no error in execute_array eval ok 161 - execute_array returned 5 rows executed ok 162 - no error captured ok 163 - 5 rows in tuple_status # $ArrayTupleStatus = [ # 1, # 1, # 1, # 1, # 1 # ]; ok 164 - tuple status is an array ok 165 - status arrays same size ok 166 - row 0 tuple status ok 167 - row 1 tuple status ok 168 - row 2 tuple status ok 169 - row 3 tuple status ok 170 - row 4 tuple status ok 171 - row 0 p1 data ok 172 - row 0 p2 data ok 173 - row 1 p1 data ok 174 - row 1 p2 data ok 175 - row 2 p1 data ok 176 - row 2 p2 data ok 177 - row 3 p1 data ok 178 - row 3 p2 data ok 179 - row 4 p1 data ok 180 - row 4 p2 data # no parameters # insert commit = 0, affected = 0, array_context = 0, tuple = ARRAY(0x57918318), error = 0, raise = 1, params = ARRAY(0x579179a4), sts = '0E0' ok 181 - no error in execute_array eval ok 182 - execute_array returned '0E0' rows executed ok 183 - no error captured ok 184 - 0E0 rows in tuple_status # $ArrayTupleStatus = []; ok 185 - tuple status is an array ok 186 - status arrays same size # error tests array_context = 1, raise = 1 # Last row in error # insert sts = undef, raise = 1, error = 1, tuple = ARRAY(0x5791994c), array_context = 1, affected = undef, commit = 0 # ***** error handler called ***** ok 187 - error in execute_array eval ok 188 - error captured # $ArrayTupleStatus = [ # 1, # 1, # 1, # 1, # [ # 1, # '[SQLite]UNIQUE constraint failed: PERL_DBD_execute_array.a (19) (SQL-HY000)', # 'HY000' # ] # ]; ok 189 - tuple status is an array ok 190 - status arrays same size ok 191 - row 0 tuple status ok 192 - row 1 tuple status ok 193 - row 2 tuple status ok 194 - row 3 tuple status ok 195 - array in array tuple status ok 196 - 3 elements in array tuple status error ok 197 - row 0 p1 data ok 198 - row 0 p2 data ok 199 - row 1 p1 data ok 200 - row 1 p2 data ok 201 - row 2 p1 data ok 202 - row 2 p2 data ok 203 - row 3 p1 data ok 204 - row 3 p2 data # 2nd last row in error # insert error = 1, tuple = ARRAY(0x57919884), array_context = 1, affected = undef, commit = 0, sts = undef, raise = 1 # ***** error handler called ***** ok 205 - error in execute_array eval ok 206 - error captured # $ArrayTupleStatus = [ # 1, # 1, # 1, # [ # 1, # '[SQLite]UNIQUE constraint failed: PERL_DBD_execute_array.a (19) (SQL-HY000)', # 'HY000' # ], # 1 # ]; ok 207 - tuple status is an array ok 208 - status arrays same size ok 209 - row 0 tuple status ok 210 - row 1 tuple status ok 211 - row 2 tuple status ok 212 - array in array tuple status ok 213 - 3 elements in array tuple status error ok 214 - row 4 tuple status ok 215 - row 0 p1 data ok 216 - row 0 p2 data ok 217 - row 1 p1 data ok 218 - row 1 p2 data ok 219 - row 2 p1 data ok 220 - row 2 p2 data ok 221 - row 3 p1 data ok 222 - row 3 p2 data # error tests raise = 1, array_context = 0 # Last row in error # insert sts = undef, raise = 1, array_context = 0, tuple = ARRAY(0x5791d2b8), error = 1, commit = 0, affected = undef # ***** error handler called ***** ok 223 - error in execute_array eval ok 224 - error captured # $ArrayTupleStatus = [ # 1, # 1, # 1, # 1, # [ # 1, # '[SQLite]UNIQUE constraint failed: PERL_DBD_execute_array.a (19) (SQL-HY000)', # 'HY000' # ] # ]; ok 225 - tuple status is an array ok 226 - status arrays same size ok 227 - row 0 tuple status ok 228 - row 1 tuple status ok 229 - row 2 tuple status ok 230 - row 3 tuple status ok 231 - array in array tuple status ok 232 - 3 elements in array tuple status error ok 233 - row 0 p1 data ok 234 - row 0 p2 data ok 235 - row 1 p1 data ok 236 - row 1 p2 data ok 237 - row 2 p1 data ok 238 - row 2 p2 data ok 239 - row 3 p1 data ok 240 - row 3 p2 data # 2nd last row in error # insert error = 1, array_context = 0, tuple = ARRAY(0x57924008), commit = 0, affected = undef, sts = undef, raise = 1 # ***** error handler called ***** ok 241 - error in execute_array eval ok 242 - error captured # $ArrayTupleStatus = [ # 1, # 1, # 1, # [ # 1, # '[SQLite]UNIQUE constraint failed: PERL_DBD_execute_array.a (19) (SQL-HY000)', # 'HY000' # ], # 1 # ]; ok 243 - tuple status is an array ok 244 - status arrays same size ok 245 - row 0 tuple status ok 246 - row 1 tuple status ok 247 - row 2 tuple status ok 248 - array in array tuple status ok 249 - 3 elements in array tuple status error ok 250 - row 4 tuple status ok 251 - row 0 p1 data ok 252 - row 0 p2 data ok 253 - row 1 p1 data ok 254 - row 1 p2 data ok 255 - row 2 p1 data ok 256 - row 2 p2 data ok 257 - row 3 p1 data ok 258 - row 3 p2 data # error tests array_context = 1, raise = 0 # Last row in error # insert tuple = ARRAY(0x57924f04), array_context = 1, error = 1, affected = undef, commit = 0, sts = undef, raise = 0 # ***** error handler called ***** ok 259 - no error in execute_array eval ok 260 - execute_array returned undef rows executed ok 261 - total affected undef # $ArrayTupleStatus = [ # 1, # 1, # 1, # 1, # [ # 1, # '[SQLite]UNIQUE constraint failed: PERL_DBD_execute_array.a (19) (SQL-HY000)', # 'HY000' # ] # ]; ok 262 - tuple status is an array ok 263 - status arrays same size ok 264 - row 0 tuple status ok 265 - row 1 tuple status ok 266 - row 2 tuple status ok 267 - row 3 tuple status ok 268 - array in array tuple status ok 269 - 3 elements in array tuple status error ok 270 - row 0 p1 data ok 271 - row 0 p2 data ok 272 - row 1 p1 data ok 273 - row 1 p2 data ok 274 - row 2 p1 data ok 275 - row 2 p2 data ok 276 - row 3 p1 data ok 277 - row 3 p2 data # 2nd last row in error # insert raise = 0, sts = undef, commit = 0, affected = undef, array_context = 1, tuple = ARRAY(0x5792560c), error = 1 # ***** error handler called ***** ok 278 - no error in execute_array eval ok 279 - execute_array returned undef rows executed ok 280 - total affected undef # $ArrayTupleStatus = [ # 1, # 1, # 1, # [ # 1, # '[SQLite]UNIQUE constraint failed: PERL_DBD_execute_array.a (19) (SQL-HY000)', # 'HY000' # ], # 1 # ]; ok 281 - tuple status is an array ok 282 - status arrays same size ok 283 - row 0 tuple status ok 284 - row 1 tuple status ok 285 - row 2 tuple status ok 286 - array in array tuple status ok 287 - 3 elements in array tuple status error ok 288 - row 4 tuple status ok 289 - row 0 p1 data ok 290 - row 0 p2 data ok 291 - row 1 p1 data ok 292 - row 1 p2 data ok 293 - row 2 p1 data ok 294 - row 2 p2 data ok 295 - row 3 p1 data ok 296 - row 3 p2 data # error tests raise = 0, array_context = 0 # Last row in error # insert commit = 0, affected = undef, array_context = 0, tuple = ARRAY(0x5792aaa8), error = 1, raise = 0, sts = undef # ***** error handler called ***** ok 297 - no error in execute_array eval ok 298 - execute_array returned undef rows executed # $ArrayTupleStatus = [ # 1, # 1, # 1, # 1, # [ # 1, # '[SQLite]UNIQUE constraint failed: PERL_DBD_execute_array.a (19) (SQL-HY000)', # 'HY000' # ] # ]; ok 299 - tuple status is an array ok 300 - status arrays same size ok 301 - row 0 tuple status ok 302 - row 1 tuple status ok 303 - row 2 tuple status ok 304 - row 3 tuple status ok 305 - array in array tuple status ok 306 - 3 elements in array tuple status error ok 307 - row 0 p1 data ok 308 - row 0 p2 data ok 309 - row 1 p1 data ok 310 - row 1 p2 data ok 311 - row 2 p1 data ok 312 - row 2 p2 data ok 313 - row 3 p1 data ok 314 - row 3 p2 data # 2nd last row in error # insert error = 1, array_context = 0, tuple = ARRAY(0x5792d6f0), commit = 0, affected = undef, sts = undef, raise = 0 # ***** error handler called ***** ok 315 - no error in execute_array eval ok 316 - execute_array returned undef rows executed # $ArrayTupleStatus = [ # 1, # 1, # 1, # [ # 1, # '[SQLite]UNIQUE constraint failed: PERL_DBD_execute_array.a (19) (SQL-HY000)', # 'HY000' # ], # 1 # ]; ok 317 - tuple status is an array ok 318 - status arrays same size ok 319 - row 0 tuple status ok 320 - row 1 tuple status ok 321 - row 2 tuple status ok 322 - array in array tuple status ok 323 - 3 elements in array tuple status error ok 324 - row 4 tuple status ok 325 - row 0 p1 data ok 326 - row 0 p2 data ok 327 - row 1 p1 data ok 328 - row 1 p2 data ok 329 - row 2 p1 data ok 330 - row 2 p2 data ok 331 - row 3 p1 data ok 332 - row 3 p2 data # row_size via execute_for_fetch # insert affected = 5, commit = 0, fetch = CODE(0x5788a980), error = 0, tuple = ARRAY(0x5792d86c), array_context = 1, raise = 1, sts = 5 # fetch_sub 0 # fetch_sub 1 # fetch_sub 2 # fetch_sub 3 # fetch_sub 4 # fetch_sub 5 # returning undef ok 333 - no error in execute_array eval ok 334 - execute_array returned 5 rows executed ok 335 - total affected 5 ok 336 - no error captured ok 337 - 5 rows in tuple_status # $ArrayTupleStatus = [ # 1, # 1, # 1, # 1, # 1 # ]; ok 338 - tuple status is an array ok 339 - status arrays same size ok 340 - row 0 tuple status ok 341 - row 1 tuple status ok 342 - row 2 tuple status ok 343 - row 3 tuple status ok 344 - row 4 tuple status # row_size via select ok 345 - execute on second table ok 346 - second statement is in executed state # insert affected = 5, commit = 0, fetch = DBI::st=HASH(0x5792db28), error = 0, tuple = ARRAY(0x5792df4c), array_context = 1, requires_mas = 1, raise = 1, sts = 5 ok 347 - no error in execute_array eval ok 348 - execute_array returned 5 rows executed ok 349 - total affected 5 ok 350 - no error captured ok 351 - 5 rows in tuple_status # $ArrayTupleStatus = [ # 1, # 1, # 1, # 1, # 1 # ]; ok 352 - tuple status is an array ok 353 - status arrays same size ok 354 - row 0 tuple status ok 355 - row 1 tuple status ok 356 - row 2 tuple status ok 357 - row 3 tuple status ok 358 - row 4 tuple status ok 359 - row 0 p1 data ok 360 - row 0 p2 data ok 361 - row 1 p1 data ok 362 - row 1 p2 data ok 363 - row 2 p1 data ok 364 - row 2 p2 data ok 365 - row 3 p1 data ok 366 - row 3 p2 data ok 367 - row 4 p1 data ok 368 - row 4 p2 data # update test # insert array_context = 1, tuple = ARRAY(0x5792d8f8), error = 0, fetch = CODE(0x5788a980), commit = 0, affected = 5, sts = 5, raise = 1 # fetch_sub 0 # fetch_sub 1 # fetch_sub 2 # fetch_sub 3 # fetch_sub 4 # fetch_sub 5 # returning undef ok 369 - no error in execute_array eval ok 370 - execute_array returned 5 rows executed ok 371 - total affected 5 ok 372 - no error captured ok 373 - 5 rows in tuple_status # $ArrayTupleStatus = [ # 1, # 1, # 1, # 1, # 1 # ]; ok 374 - tuple status is an array ok 375 - status arrays same size ok 376 - row 0 tuple status ok 377 - row 1 tuple status ok 378 - row 2 tuple status ok 379 - row 3 tuple status ok 380 - row 4 tuple status ok 381 - row 0 p1 data ok 382 - row 0 p2 data ok 383 - row 1 p1 data ok 384 - row 1 p2 data ok 385 - row 2 p1 data ok 386 - row 2 p2 data ok 387 - row 3 p1 data ok 388 - row 3 p2 data ok 389 - row 4 p1 data ok 390 - row 4 p2 data # insert sts = 5, raise = 1, error = 0, tuple = ARRAY(0x5792ae90), array_context = 1, affected = 5, commit = 0 ok 391 - no error in execute_array eval ok 392 - execute_array returned 5 rows executed ok 393 - total affected 5 ok 394 - no error captured ok 395 - 5 rows in tuple_status # $ArrayTupleStatus = [ # 1, # 1, # 1, # 1, # 1 # ]; ok 396 - tuple status is an array ok 397 - status arrays same size ok 398 - row 0 tuple status ok 399 - row 1 tuple status ok 400 - row 2 tuple status ok 401 - row 3 tuple status ok 402 - row 4 tuple status ok 403 - row 0 p1 data ok 404 - row 0 p2 data ok 405 - row 1 p1 data ok 406 - row 1 p2 data ok 407 - row 2 p1 data ok 408 - row 2 p2 data ok 409 - row 3 p1 data ok 410 - row 3 p2 data ok 411 - row 4 p1 data ok 412 - row 4 p2 data # insert raise = 1, sts = 5, affected = 4, commit = 0, error = 0, tuple = ARRAY(0x5792db8c), array_context = 1 ok 413 - no error in execute_array eval ok 414 - execute_array returned 5 rows executed ok 415 - total affected 4 ok 416 - no error captured ok 417 - 5 rows in tuple_status # $ArrayTupleStatus = [ # 1, # 1, # 1, # 1, # '0E0' # ]; ok 418 - tuple status is an array ok 419 - status arrays same size ok 420 - row 0 tuple status ok 421 - row 1 tuple status ok 422 - row 2 tuple status ok 423 - row 3 tuple status ok 424 - row 4 tuple status ok 425 - row 0 p1 data ok 426 - row 0 p2 data ok 427 - row 1 p1 data ok 428 - row 1 p2 data ok 429 - row 2 p1 data ok 430 - row 2 p2 data ok 431 - row 3 p1 data ok 432 - row 3 p2 data ok 433 - row 4 p1 data ok 434 - row 4 p2 data # insert commit = 0, affected = 5, error = 0, array_context = 1, tuple = ARRAY(0x57937290), raise = 1, sts = 2 ok 435 - no error in execute_array eval ok 436 - execute_array returned 2 rows executed ok 437 - total affected 5 ok 438 - no error captured ok 439 - 2 rows in tuple_status # $ArrayTupleStatus = [ # 4, # 1 # ]; ok 440 - tuple status is an array ok 441 - status arrays same size ok 442 - row 0 tuple status ok 443 - row 1 tuple status ok 444 - row 0 p1 data ok 445 - row 0 p2 data ok 446 - row 1 p1 data ok 447 - row 1 p2 data ok 448 - row 2 p1 data ok 449 - row 2 p2 data ok 450 - row 3 p1 data ok 451 - row 3 p2 data ok 452 - row 4 p1 data ok 453 - row 4 p2 data # error tests array_context = 1, raise = 1, notuplestatus = 1 # Last row in error # insert tuple = ARRAY(0x579372a4), array_context = 1, error = 1, affected = undef, commit = 0, sts = undef, notuplestatus = 1, raise = 1 # ***** error handler called ***** ok 454 - error in execute_array eval ok 455 - error captured ok 456 - row 0 p1 data ok 457 - row 0 p2 data ok 458 - row 1 p1 data ok 459 - row 1 p2 data ok 460 - row 2 p1 data ok 461 - row 2 p2 data ok 462 - row 3 p1 data ok 463 - row 3 p2 data # 2nd last row in error # insert notuplestatus = 1, raise = 1, sts = undef, affected = undef, commit = 0, error = 1, tuple = ARRAY(0x57936fe8), array_context = 1 # ***** error handler called ***** ok 464 - error in execute_array eval ok 465 - error captured ok 466 - row 0 p1 data ok 467 - row 0 p2 data ok 468 - row 1 p1 data ok 469 - row 1 p2 data ok 470 - row 2 p1 data ok 471 - row 2 p2 data ok 472 - row 3 p1 data ok 473 - row 3 p2 data # error tests raise = 1, notuplestatus = 1, array_context = 0 # Last row in error # insert commit = 0, affected = undef, array_context = 0, tuple = ARRAY(0x5793d660), error = 1, raise = 1, notuplestatus = 1, sts = undef # ***** error handler called ***** ok 474 - error in execute_array eval ok 475 - error captured ok 476 - row 0 p1 data ok 477 - row 0 p2 data ok 478 - row 1 p1 data ok 479 - row 1 p2 data ok 480 - row 2 p1 data ok 481 - row 2 p2 data ok 482 - row 3 p1 data ok 483 - row 3 p2 data # 2nd last row in error # insert sts = undef, raise = 1, notuplestatus = 1, array_context = 0, tuple = ARRAY(0x57940ce0), error = 1, commit = 0, affected = undef # ***** error handler called ***** ok 484 - error in execute_array eval ok 485 - error captured ok 486 - row 0 p1 data ok 487 - row 0 p2 data ok 488 - row 1 p1 data ok 489 - row 1 p2 data ok 490 - row 2 p1 data ok 491 - row 2 p2 data ok 492 - row 3 p1 data ok 493 - row 3 p2 data # error tests notuplestatus = 1, raise = 0, array_context = 1 # Last row in error # insert array_context = 1, tuple = ARRAY(0x57941a3c), error = 1, commit = 0, affected = undef, sts = undef, raise = 0, notuplestatus = 1 # ***** error handler called ***** ok 494 - no error in execute_array eval ok 495 - execute_array returned undef rows executed ok 496 - total affected undef ok 497 - row 0 p1 data ok 498 - row 0 p2 data ok 499 - row 1 p1 data ok 500 - row 1 p2 data ok 501 - row 2 p1 data ok 502 - row 2 p2 data ok 503 - row 3 p1 data ok 504 - row 3 p2 data # 2nd last row in error # insert raise = 0, notuplestatus = 1, sts = undef, commit = 0, affected = undef, error = 1, array_context = 1, tuple = ARRAY(0x579418e8) # ***** error handler called ***** ok 505 - no error in execute_array eval ok 506 - execute_array returned undef rows executed ok 507 - total affected undef ok 508 - row 0 p1 data ok 509 - row 0 p2 data ok 510 - row 1 p1 data ok 511 - row 1 p2 data ok 512 - row 2 p1 data ok 513 - row 2 p2 data ok 514 - row 3 p1 data ok 515 - row 3 p2 data # error tests notuplestatus = 1, raise = 0, array_context = 0 # Last row in error # insert error = 1, array_context = 0, tuple = ARRAY(0x579423d8), commit = 0, affected = undef, sts = undef, raise = 0, notuplestatus = 1 # ***** error handler called ***** ok 516 - no error in execute_array eval ok 517 - execute_array returned undef rows executed ok 518 - row 0 p1 data ok 519 - row 0 p2 data ok 520 - row 1 p1 data ok 521 - row 1 p2 data ok 522 - row 2 p1 data ok 523 - row 2 p2 data ok 524 - row 3 p1 data ok 525 - row 3 p2 data # 2nd last row in error # insert tuple = ARRAY(0x579469a0), array_context = 0, error = 1, affected = undef, commit = 0, sts = undef, notuplestatus = 1, raise = 0 # ***** error handler called ***** ok 526 - no error in execute_array eval ok 527 - execute_array returned undef rows executed ok 528 - row 0 p1 data ok 529 - row 0 p2 data ok 530 - row 1 p1 data ok 531 - row 1 p2 data ok 532 - row 2 p1 data ok 533 - row 2 p2 data ok 534 - row 3 p1 data ok 535 - row 3 p2 data # Table dropped 1..535 ok t/70execute_array_native.t ... skipped: SQLite fails this test horribly - I can't find anywhere to report it t/80_odbc_diags.t ............ skipped: sqlite core dumps with this test - I can't find anywhere to report it t/82_table_info.t ............ ok 1 - table found ok 2 - table only ok 3 # skip SQLite is known to fail the next test because catalog, schema and table are returned as '' instead of undef 1..3 ok t/87_odbc_lob_read.t ......... skipped: Not MS SQL Server t/90_trace_flags.t ........... ok 1 - odbcunicode ok 2 - odbcconnection ok 3 - parse_trace_flags 1..3 ok t/odbc_describe_parameter.t .. 1..17 ok 1 - use ODBCTEST; ok 2 - create test table with integer ok 3 - prepare insert ok 4 - execute ok ok 5 - ParamTypes is a hash ok 6 - one parameter ok 7 - integer parameter ok 8 - prepare insert ok 9 - execute ok ok 10 - ParamTypes is a hash ok 11 - one parameter ok 12 - char parameter (prepare) ok 13 - prepare insert ok 14 - execute ok ok 15 - ParamTypes is a hash ok 16 - one parameter ok 17 - char parameter (connect) ok # Test::Pod::Coverage 1.04 required for testing POD coverage t/pod-coverage.t ............. 1..1 ok 1 - Pod::Coverage ok t/pod.t ...................... 1..4 ok 1 # skip Test::Pod 1.00 required for testing POD ok 2 # skip Test::Pod 1.00 required for testing POD ok 3 # skip Test::Pod 1.00 required for testing POD ok 4 # skip Test::Pod 1.00 required for testing POD ok t/rt_101579.t ................ ok 1 - use ODBCTEST; ok 2 - Inserted 8295.6 ok 3 - Inserted 181161.8 ok 4 - Inserted 6514.15 1..4 ok t/rt_38977.t ................. 1..14 ok 1 - use ODBCTEST; ok 2 - got DBMS name: SQLite ok 3 - got DBMS version: 3.24.0 ok 4 - got DRIVER name: sqlite3odbc.so ok 5 - got DRIVER version 0.9996 ok 6 # skip not SQL Server ok 7 # skip not SQL Server ok 8 # skip not SQL Server ok 9 # skip not SQL Server ok 10 # skip not SQL Server ok 11 # skip not SQL Server ok 12 # skip not SQL Server ok 13 # skip not SQL Server ok 14 # skip not SQL Server ok t/rt_39841.t ................. 1..28 ok 1 - use ODBCTEST; ok 2 - got DBMS name: SQLite ok 3 - got DBMS version: 3.24.0 ok 4 # skip not SQL Server ok 5 # skip not SQL Server ok 6 # skip not SQL Server ok 7 # skip not SQL Server ok 8 # skip not SQL Server ok 9 # skip not SQL Server ok 10 # skip not SQL Server ok 11 # skip not SQL Server ok 12 # skip not SQL Server ok 13 # skip not SQL Server ok 14 # skip not SQL Server ok 15 # skip not SQL Server ok 16 # skip not SQL Server ok 17 # skip not SQL Server ok 18 # skip not SQL Server ok 19 # skip not SQL Server ok 20 # skip not SQL Server ok 21 # skip not SQL Server ok 22 # skip not SQL Server ok 23 # skip not SQL Server ok 24 # skip not SQL Server ok 25 # skip not SQL Server ok 26 # skip not SQL Server ok 27 # skip not SQL Server ok 28 # skip not SQL Server ok t/rt_39897.t ................. 1..6 ok 1 - use ODBCTEST; ok 2 - create test table with varchar ok 3 - prepare insert ok 4 - execute insert ok 5 - issue select on test table ok 6 - fetch varchar(100) from test table ok t/rt_43384.t ................. 1..8 ok 1 - use ODBCTEST; ok 2 # skip Microsoft Access tests not supported using SQLite ok 3 # skip Microsoft Access tests not supported using SQLite ok 4 # skip Microsoft Access tests not supported using SQLite ok 5 # skip Microsoft Access tests not supported using SQLite ok 6 # skip Microsoft Access tests not supported using SQLite ok 7 # skip Microsoft Access tests not supported using SQLite ok 8 # skip Microsoft Access tests not supported using SQLite ok t/rt_46597.t ................. 1..6 ok 1 - use ODBCTEST; ok 2 # skip Microsoft Access tests not supported using SQLite ok 3 # skip Microsoft Access tests not supported using SQLite ok 4 # skip Microsoft Access tests not supported using SQLite ok 5 # skip Microsoft Access tests not supported using SQLite ok 6 # skip Microsoft Access tests not supported using SQLite ok t/rt_50852.t ................. 1..5 ok 1 - use ODBCTEST; ok 2 # skip Microsoft SQL Server test not supported using SQLite ok 3 # skip Microsoft SQL Server test not supported using SQLite ok 4 # skip Microsoft SQL Server test not supported using SQLite ok 5 # skip Microsoft SQL Server test not supported using SQLite ok # # Some of these tests may fail for your driver - please let me know if they do along with the strings SQLite/sqlite3odbc.so t/rt_57957.t ................. 1..8 ok 1 - use ODBCTEST; ok 2 - Prepare with trailing comment and named placeholder ok 3 - Prepare with leading comment and named placeholder ok 4 - Prepare with line comment named placeholder ok 5 - Prepare with leading comment and ? placeholder ok 6 - Prepare with line comment and ? placeholder ok 7 - Prepare with ? placeholder in literal ok 8 - Prepare with named placeholder in literal ok t/rt_59621.t ................. 1..11 ok 1 - use ODBCTEST; ok 2 - got DBMS name: SQLite ok 3 - got DBMS version: 3.24.0 ok 4 - got DRIVER name: sqlite3odbc.so ok 5 - got DRIVER version 0.9996 ok 6 # skip not SQL Server ok 7 # skip not SQL Server ok 8 # skip not SQL Server ok 9 # skip not SQL Server ok 10 # skip not SQL Server ok 11 # skip not SQL Server ok t/rt_61370.t ................. ok 1 - use ODBCTEST; ok 2 - got DBMS name: SQLite ok 3 - got DBMS version: 3.24.0 ok 4 - got DRIVER name: sqlite3odbc.so ok 5 - got DRIVER version 0.9996 # Not Microsoft SQL Server 1..5 ok t/rt_62033.t ................. ok 1 - use ODBCTEST; ok 2 - got DBMS name: SQLite ok 3 - got DBMS version: 3.24.0 ok 4 - got DRIVER name: sqlite3odbc.so ok 5 - got DRIVER version 0.9996 # Not Microsoft SQL Server 1..5 ok t/rt_63550.t ................. ok 1 - use ODBCTEST; ok 2 - Statement is defined 1..2 ok t/rt_78838.t ................. ok 1 - use ODBCTEST; ok 2 - got DBMS name: SQLite # Not Microsoft SQL Server 1..2 ok t/rt_79190.t ................. skipped: DBI_USER is undefined t/rt_79397.t ................. ok 1 - use ODBCTEST; ok 2 - got DBMS name: SQLite ok 3 - got DBMS version: 3.24.0 ok 4 - got DRIVER name: sqlite3odbc.so ok 5 - got DRIVER version 0.9996 # Not Microsoft SQL Server 1..5 ok t/rt_81911.t ................. ok 1 - use ODBCTEST; ok 2 - affected from execute insert ok 3 - execute and odbc_rows agree on insert ok 4 - affected from execute insert ok 5 - execute and odbc_rows agree on insert 2 ok 6 - affected from execute update none ok 7 - execute and odbc_rows agree on update none ok 8 - affected from execute update 1 ok 9 - execute and odbc_rows agree on update 1 ok 10 - affected from execute update 2 ok 11 - execute and odbc_rows agree on update 2 1..11 ok t/rt_null_nvarchar.t ......... 1..8 ok 1 - got DBMS name: SQLite ok 2 - got DBMS version: 3.24.0 ok 3 - got DRIVER name: sqlite3odbc.so ok 4 - got DRIVER version 0.9996 ok 5 # skip not SQL Server ok 6 # skip not SQL Server ok 7 # skip not SQL Server ok 8 # skip not SQL Server ok t/sql_type_cast.t ............ 1..16 ok 1 - use ODBCTEST; ok 2 - create test table with integer ok 3 - insert into table ok 4 - correct value returned ok 5 - ! ivok no bind ok 6 - correct value returned Bind ok 7 - ! ivok bind ok 8 - correct value returned SQL_NUMERIC ok 9 - ivok bind integer ok 10 - PV bind integer ok 11 - correct value returned SQL_NUMERIC|DiscardString ok 12 - ivok bind integer discard ok 13 - not PV bind integer discard ok 14 - correct value returned SQL_NUMERIC|DiscardString ok 15 - ivok bind integer discard ok 16 - not PV bind integer discard ok All tests successful. Files=42, Tests=1086, 4 wallclock secs ( 0.12 usr 0.04 sys + 2.74 cusr 0.18 csys = 3.08 CPU) Result: PASS make[2]: Leaving directory '/build/libdbd-odbc-perl-1.60' # remove testdb after tests rm -f -v /tmp/tmp.eHLGyO1bqX removed '/tmp/tmp.eHLGyO1bqX' make[1]: Leaving directory '/build/libdbd-odbc-perl-1.60' create-stamp debian/debhelper-build-stamp fakeroot debian/rules binary dh binary --with perl_dbi dh_testroot dh_prep dh_auto_install make -j18 install DESTDIR=/build/libdbd-odbc-perl-1.60/debian/libdbd-odbc-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/libdbd-odbc-perl-1.60' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- ODBC.bs blib/arch/auto/DBD/ODBC/ODBC.bs 644 Manifying 1 pod document Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /build/libdbd-odbc-perl-1.60/debian/libdbd-odbc-perl/usr/lib/i386-linux-gnu/perl5/5.28/auto/DBD/ODBC/ODBC.so Installing /build/libdbd-odbc-perl-1.60/debian/libdbd-odbc-perl/usr/lib/i386-linux-gnu/perl5/5.28/DBD/ODBC.pm Installing /build/libdbd-odbc-perl-1.60/debian/libdbd-odbc-perl/usr/lib/i386-linux-gnu/perl5/5.28/DBD/ODBC/FAQ.pm Installing /build/libdbd-odbc-perl-1.60/debian/libdbd-odbc-perl/usr/lib/i386-linux-gnu/perl5/5.28/DBD/ODBC/TO_DO.pm Installing /build/libdbd-odbc-perl-1.60/debian/libdbd-odbc-perl/usr/lib/i386-linux-gnu/perl5/5.28/DBD/ODBC/Changes.pm Installing /build/libdbd-odbc-perl-1.60/debian/libdbd-odbc-perl/usr/share/man/man3/DBD::ODBC.3pm make[1]: Leaving directory '/build/libdbd-odbc-perl-1.60' debian/rules override_dh_installdocs make[1]: Entering directory '/build/libdbd-odbc-perl-1.60' pod2text FAQ > debian/FAQ dh_installdocs make[1]: Leaving directory '/build/libdbd-odbc-perl-1.60' debian/rules override_dh_installchangelogs make[1]: Entering directory '/build/libdbd-odbc-perl-1.60' pod2text Changes > debian/Changes.txt dh_installchangelogs debian/Changes.txt make[1]: Leaving directory '/build/libdbd-odbc-perl-1.60' debian/rules override_dh_installexamples make[1]: Entering directory '/build/libdbd-odbc-perl-1.60' dh_installexamples sed -i '1s|^##!/usr/bin/perl|#!/usr/bin/perl|' /build/libdbd-odbc-perl-1.60/debian/libdbd-odbc-perl/usr/share/doc/libdbd-odbc-perl/examples/* sed -i '1s|^#!perl|#!/usr/bin/perl|' /build/libdbd-odbc-perl-1.60/debian/libdbd-odbc-perl/usr/share/doc/libdbd-odbc-perl/examples/* sed -i '1s|^#/usr/bin/perl|#!/usr/bin/perl|' /build/libdbd-odbc-perl-1.60/debian/libdbd-odbc-perl/usr/share/doc/libdbd-odbc-perl/examples/* sed -i '1s|^#!/usr/bin/perl.exe|#!/usr/bin/perl|' /build/libdbd-odbc-perl-1.60/debian/libdbd-odbc-perl/usr/share/doc/libdbd-odbc-perl/examples/* sed -i '1s|^#!c:/programme/perl/bin/perl.exe|#!/usr/bin/perl|' /build/libdbd-odbc-perl-1.60/debian/libdbd-odbc-perl/usr/share/doc/libdbd-odbc-perl/examples/* sed -i '1s|^\(#[^!].\+\)|#!/usr/bin/perl\n\1|' /build/libdbd-odbc-perl-1.60/debian/libdbd-odbc-perl/usr/share/doc/libdbd-odbc-perl/examples/*.pl sed -i '1s|^\(use strict;\)|#!/usr/bin/perl\n\1|' /build/libdbd-odbc-perl-1.60/debian/libdbd-odbc-perl/usr/share/doc/libdbd-odbc-perl/examples/*.pl sed -i '1s|^\(use DBI;\)|#!/usr/bin/perl\n\1|' /build/libdbd-odbc-perl-1.60/debian/libdbd-odbc-perl/usr/share/doc/libdbd-odbc-perl/examples/*.pl make[1]: Leaving directory '/build/libdbd-odbc-perl-1.60' dh_installman dh_perl dh_perl_dbi dh_link dh_strip_nondeterminism dh_compress debian/rules override_dh_fixperms make[1]: Entering directory '/build/libdbd-odbc-perl-1.60' dh_fixperms chmod 755 /build/libdbd-odbc-perl-1.60/debian/libdbd-odbc-perl/usr/share/doc/libdbd-odbc-perl/examples/*.pl make[1]: Leaving directory '/build/libdbd-odbc-perl-1.60' dh_missing dh_strip dh_makeshlibs dh_shlibdeps dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libdbd-odbc-perl' in '../libdbd-odbc-perl_1.60-1_i386.deb'. dpkg-deb: building package 'libdbd-odbc-perl-dbgsym' in '../libdbd-odbc-perl-dbgsym_1.60-1_i386.deb'. dpkg-genbuildinfo --build=binary dpkg-genchanges --build=binary >../libdbd-odbc-perl_1.60-1_i386.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/19904 and its subdirectories I: Current time: Sat Jul 25 06:00:22 -12 2020 I: pbuilder-time-stamp: 1595700022 Sun Jun 23 11:37:22 UTC 2019 I: 1st build successful. Starting 2nd build on remote node profitbricks-build2-i386.debian.net. Sun Jun 23 11:37:22 UTC 2019 I: Preparing to do remote build '2' on profitbricks-build2-i386.debian.net. Sun Jun 23 11:50:48 UTC 2019 I: Deleting $TMPDIR on profitbricks-build2-i386.debian.net. Sun Jun 23 11:50:48 UTC 2019 I: libdbd-odbc-perl_1.60-1_i386.changes: Format: 1.8 Date: Sat, 03 Nov 2018 07:50:11 +0100 Source: libdbd-odbc-perl Binary: libdbd-odbc-perl libdbd-odbc-perl-dbgsym Architecture: i386 Version: 1.60-1 Distribution: unstable Urgency: medium Maintainer: Debian Perl Group Changed-By: Xavier Guimard Description: libdbd-odbc-perl - Perl Database Driver implementing ODBC for DBI Changes: libdbd-odbc-perl (1.60-1) unstable; urgency=medium . * Email change: Xavier Guimard -> yadd@debian.org * Import upstream version 1.60 Checksums-Sha1: 6ae83720664aea1159c0c678871d7369f3091857 141324 libdbd-odbc-perl-dbgsym_1.60-1_i386.deb 233ca9bed8d59223e5b6c0c809d0e93bc5d8565c 4761 libdbd-odbc-perl_1.60-1_i386.buildinfo d5bed11ffaeb9eecbcf7b80e337947d54509fd20 275188 libdbd-odbc-perl_1.60-1_i386.deb Checksums-Sha256: 62c4ce7706544923ec33032a0df1395b926f08b03fd5027a817cdd543275312c 141324 libdbd-odbc-perl-dbgsym_1.60-1_i386.deb 8e2ee052c5c95467edca7fb51e04573ecb634960d16d728224a9a8369bf5a4e6 4761 libdbd-odbc-perl_1.60-1_i386.buildinfo ff1c2ba2e9f96cb0755af9ea96d0fbbf2b7ccb7c3fbbe7f100d883dfad53b8fd 275188 libdbd-odbc-perl_1.60-1_i386.deb Files: a16db829f49a6fcdee325050495bd688 141324 debug optional libdbd-odbc-perl-dbgsym_1.60-1_i386.deb e936c0dfdb57f6d58044ada058d7b750 4761 perl optional libdbd-odbc-perl_1.60-1_i386.buildinfo 667d70dd8633e4992f2be50582a623de 275188 perl optional libdbd-odbc-perl_1.60-1_i386.deb Sun Jun 23 11:50:49 UTC 2019 I: diffoscope 115 will be used to compare the two builds: # Profiling output for: /usr/bin/diffoscope --html /srv/reproducible-results/rbuild-debian/tmp.3AvEzKLkWf/libdbd-odbc-perl_1.60-1.diffoscope.html --text /srv/reproducible-results/rbuild-debian/tmp.3AvEzKLkWf/libdbd-odbc-perl_1.60-1.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/tmp.3AvEzKLkWf/libdbd-odbc-perl_1.60-1.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/tmp.3AvEzKLkWf/b1/libdbd-odbc-perl_1.60-1_i386.changes /srv/reproducible-results/rbuild-debian/tmp.3AvEzKLkWf/b2/libdbd-odbc-perl_1.60-1_i386.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.209s) 0.209s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.024s) 0.024s 10 calls diffoscope.comparators.binary.FilesystemFile Sun Jun 23 11:50:50 UTC 2019 I: diffoscope 115 found no differences in the changes files, and a .buildinfo file also exists. Sun Jun 23 11:50:50 UTC 2019 I: libdbd-odbc-perl from buster built successfully and reproducibly on i386. Sun Jun 23 11:50:52 UTC 2019 I: Submitting .buildinfo files to external archives: Sun Jun 23 11:50:52 UTC 2019 I: Submitting 8.0K b1/libdbd-odbc-perl_1.60-1_i386.buildinfo.asc Sun Jun 23 11:51:02 UTC 2019 I: Submitting 8.0K b2/libdbd-odbc-perl_1.60-1_i386.buildinfo.asc Sun Jun 23 11:51:19 UTC 2019 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Sun Jun 23 11:51:19 UTC 2019 I: Done submitting .buildinfo files. Sun Jun 23 11:51:19 UTC 2019 I: Removing signed libdbd-odbc-perl_1.60-1_i386.buildinfo.asc files: removed './b1/libdbd-odbc-perl_1.60-1_i386.buildinfo.asc' removed './b2/libdbd-odbc-perl_1.60-1_i386.buildinfo.asc'