Wed May 27 17:25:00 UTC 2020 I: starting to build trickle/buster/armhf on jenkins on '2020-05-27 17:24' Wed May 27 17:25:00 UTC 2020 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/armhf_15/2955/console.log Wed May 27 17:25:00 UTC 2020 I: Downloading source for buster/trickle=1.07-10.1 --2020-05-27 17:25:02-- http://deb.debian.org/debian/pool/main/t/trickle/trickle_1.07-10.1.dsc Connecting to 78.137.99.97:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 1847 (1.8K) Saving to: ‘trickle_1.07-10.1.dsc’ 0K . 100% 69.7M=0s 2020-05-27 17:25:02 (69.7 MB/s) - ‘trickle_1.07-10.1.dsc’ saved [1847/1847] Wed May 27 17:25:02 UTC 2020 I: trickle_1.07-10.1.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 1.0 Source: trickle Binary: trickle Architecture: any Version: 1.07-10.1 Maintainer: Robert Lemmen Standards-Version: 3.9.4 Build-Depends: debhelper (>= 7.0.0), libevent-dev (>= 0.7b), autoconf, libbsd-dev, dh-autoreconf Package-List: trickle deb net optional arch=any Checksums-Sha1: fb524ef3ef1944ad5863312dfc235cbf802efa30 308863 trickle_1.07.orig.tar.gz 779215831e15ab7f8bc83e3222faf146b255020b 242918 trickle_1.07-10.1.diff.gz Checksums-Sha256: 9d36507e0b7afdfb87533244f7d75daa1c17f2768982674f4c9add5ae6c03868 308863 trickle_1.07.orig.tar.gz b66ffdda9aa003547c8cfb7fdc06d7d0c4ddc2bfd854b85305deeac194b22849 242918 trickle_1.07-10.1.diff.gz Files: 860ebc4abbbd82957c20a28bd9390d7d 308863 trickle_1.07.orig.tar.gz 3320adf88ec445c4eb1a1308a9d02695 242918 trickle_1.07-10.1.diff.gz Dgit: ad0bdee8f935989353752dfa37f65dab6f906099 debian archive/debian/1.07-10.1 https://git.dgit.debian.org/trickle -----BEGIN PGP SIGNATURE----- iQJGBAEBCgAwFiEEi3hoeGwz5cZMTQpICBa54Yx2K60FAljdmCESHG1hdHRpYUBk ZWJpYW4ub3JnAAoJEAgWueGMdiuthEIQAKkVXYvsPWFYgk6P2nmqj41dfc8Y980p ZqtBLHnqkRGDfllJhqaXucgJTw27tdbDH0Eq8tOfu5Cj2FrY3/aGbg9sQcXjQai8 YvB2HqXMX1M5fQn3vcMYQeaRvLKNYuy5V5AOL9SFJTOJp/ynfhGzkKLhvf01Wubg A3BiYad9LoSf2XXlKhzFk2mmo/iX3PzF221uHAv5fj+OWi040G2Q9mWGCk9tfRKA OMDR37/FuGI3aKG3Dcn0DA7Lrp706yLPZaGEdWPve8+IeGmilJkohhXFjJfS9cNp bODUX2Fi5l7cJUrll2xBa57t8MCFJ8YG485s5xc7oO0vQr+YMfzIMA8myPa+wUP8 zTQqhnsWPKBjWY5uCRpRRvrwzMCYf/k5O8KDi7Ojxtoy52uvmUAhZAliTNcqbstX 7v80pnDVp+lMHcp9Z8Y6SX/TAlPk3vBUISMaygAhMWbuHTtH23Km74kL9rEh3cdB ALOf62VpoLluSYq08akNsVqrYxi0r2JH4V3QrqpXBmQlPK5aHBGZF9B4zSd41QKL yupB1hjRQq7WFlpNnhOUsUn6f9DMC6BXPfdRfoZD7yMF0Fig1wP/dWXqSbjLemDo A2r379jl7oh3hfNdmGhioIAk1pWXujadnrnnUwnksKeYwlyUqPGRRlTi1yoz8NgF U5T/ZXU+0dzD =s/T2 -----END PGP SIGNATURE----- Wed May 27 17:25:02 UTC 2020 I: Checking whether the package is not for us Wed May 27 17:25:02 UTC 2020 I: Starting 1st build on remote node ff2b-armhf-rb.debian.net. Wed May 27 17:25:02 UTC 2020 I: Preparing to do remote build '1' on ff2b-armhf-rb.debian.net. Wed May 27 17:27:19 UTC 2020 I: Deleting $TMPDIR on ff2b-armhf-rb.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Wed May 27 05:25:09 -12 2020 I: pbuilder-time-stamp: 1590600309 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/buster-reproducible-base.tgz] I: copying local configuration I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [trickle_1.07-10.1.dsc] I: copying [./trickle_1.07.orig.tar.gz] I: copying [./trickle_1.07-10.1.diff.gz] I: Extracting source gpgv: unknown type of key resource 'trustedkeys.kbx' gpgv: keyblock resource '/root/.gnupg/trustedkeys.kbx': General error gpgv: Signature made Thu Mar 30 11:43:29 2017 -12 gpgv: using RSA key 8B7868786C33E5C64C4D0A480816B9E18C762BAD gpgv: issuer "mattia@debian.org" gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./trickle_1.07-10.1.dsc dpkg-source: info: extracting trickle in trickle-1.07 dpkg-source: info: unpacking trickle_1.07.orig.tar.gz dpkg-source: info: applying trickle_1.07-10.1.diff.gz dpkg-source: info: upstream files that have been modified: trickle-1.07/Makefile.am trickle-1.07/Makefile.in trickle-1.07/aclocal.m4 trickle-1.07/config.guess trickle-1.07/config.h.in trickle-1.07/config.sub trickle-1.07/configure trickle-1.07/configure.in trickle-1.07/getopt.c trickle-1.07/ltmain.sh trickle-1.07/test.c trickle-1.07/trickle-overload.c trickle-1.07/trickle.1 trickle-1.07/trickle.c trickle-1.07/tricklectl.c trickle-1.07/trickled.8 trickle-1.07/trickled.conf trickle-1.07/trickled.conf.5 I: using fakeroot in build. I: Installing the build-deps -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: armhf Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper (>= 7.0.0), libevent-dev (>= 0.7b), autoconf, libbsd-dev, dh-autoreconf dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 18932 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper (>= 7.0.0); however: Package debhelper is not installed. pbuilder-satisfydepends-dummy depends on libevent-dev (>= 0.7b); however: Package libevent-dev is not installed. pbuilder-satisfydepends-dummy depends on autoconf; however: Package autoconf is not installed. pbuilder-satisfydepends-dummy depends on libbsd-dev; however: Package libbsd-dev is not installed. pbuilder-satisfydepends-dummy depends on dh-autoreconf; however: Package dh-autoreconf is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdmainutils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libbsd-dev{a} libbsd0{a} libcroco3{a} libelf1{a} libevent-2.1-6{a} libevent-core-2.1-6{a} libevent-dev{a} libevent-extra-2.1-6{a} libevent-openssl-2.1-6{a} libevent-pthreads-2.1-6{a} libfile-stripnondeterminism-perl{a} libglib2.0-0{a} libicu63{a} libmagic-mgc{a} libmagic1{a} libncurses6{a} libpipeline1{a} libsigsegv2{a} libssl1.1{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libglib2.0-data libgpm2 libltdl-dev libmail-sendmail-perl lynx shared-mime-info wget xdg-user-dirs 0 packages upgraded, 41 newly installed, 0 to remove and 0 not upgraded. Need to get 20.5 MB of archives. After unpacking 68.8 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian buster/main armhf libbsd0 armhf 0.9.1-2 [103 kB] Get: 2 http://deb.debian.org/debian buster/main armhf bsdmainutils armhf 11.1.2+b1 [186 kB] Get: 3 http://deb.debian.org/debian buster/main armhf libuchardet0 armhf 0.0.6-3 [62.2 kB] Get: 4 http://deb.debian.org/debian buster/main armhf groff-base armhf 1.22.4-3 [828 kB] Get: 5 http://deb.debian.org/debian buster/main armhf libpipeline1 armhf 1.5.1-2 [26.8 kB] Get: 6 http://deb.debian.org/debian buster/main armhf man-db armhf 2.8.5-2 [1240 kB] Get: 7 http://deb.debian.org/debian buster/main armhf sensible-utils all 0.0.12 [15.8 kB] Get: 8 http://deb.debian.org/debian buster/main armhf libmagic-mgc armhf 1:5.35-4+deb10u1 [242 kB] Get: 9 http://deb.debian.org/debian buster/main armhf libmagic1 armhf 1:5.35-4+deb10u1 [110 kB] Get: 10 http://deb.debian.org/debian buster/main armhf file armhf 1:5.35-4+deb10u1 [65.5 kB] Get: 11 http://deb.debian.org/debian buster/main armhf gettext-base armhf 0.19.8.1-9 [118 kB] Get: 12 http://deb.debian.org/debian buster/main armhf libsigsegv2 armhf 2.12-2 [32.1 kB] Get: 13 http://deb.debian.org/debian buster/main armhf m4 armhf 1.4.18-2 [190 kB] Get: 14 http://deb.debian.org/debian buster/main armhf autoconf all 2.69-11 [341 kB] Get: 15 http://deb.debian.org/debian buster/main armhf autotools-dev all 20180224.1 [77.0 kB] Get: 16 http://deb.debian.org/debian buster/main armhf automake all 1:1.16.1-4 [771 kB] Get: 17 http://deb.debian.org/debian buster/main armhf autopoint all 0.19.8.1-9 [434 kB] Get: 18 http://deb.debian.org/debian buster/main armhf libtool all 2.4.6-9 [547 kB] Get: 19 http://deb.debian.org/debian buster/main armhf dh-autoreconf all 19 [16.9 kB] Get: 20 http://deb.debian.org/debian buster/main armhf libarchive-zip-perl all 1.64-1 [96.8 kB] Get: 21 http://deb.debian.org/debian buster/main armhf libfile-stripnondeterminism-perl all 1.1.2-1 [19.8 kB] Get: 22 http://deb.debian.org/debian buster/main armhf dh-strip-nondeterminism all 1.1.2-1 [13.0 kB] Get: 23 http://deb.debian.org/debian buster/main armhf libelf1 armhf 0.176-1.1 [158 kB] Get: 24 http://deb.debian.org/debian buster/main armhf dwz armhf 0.12-3 [72.0 kB] Get: 25 http://deb.debian.org/debian buster/main armhf libglib2.0-0 armhf 2.58.3-2+deb10u2 [1101 kB] Get: 26 http://deb.debian.org/debian buster/main armhf libicu63 armhf 63.1-6+deb10u1 [8005 kB] Get: 27 http://deb.debian.org/debian buster/main armhf libxml2 armhf 2.9.4+dfsg1-7+b3 [595 kB] Get: 28 http://deb.debian.org/debian buster/main armhf libcroco3 armhf 0.6.12-3 [133 kB] Get: 29 http://deb.debian.org/debian buster/main armhf libncurses6 armhf 6.1+20181013-2+deb10u2 [79.8 kB] Get: 30 http://deb.debian.org/debian buster/main armhf gettext armhf 0.19.8.1-9 [1242 kB] Get: 31 http://deb.debian.org/debian buster/main armhf intltool-debian all 0.35.0+20060710.5 [26.8 kB] Get: 32 http://deb.debian.org/debian buster/main armhf po-debconf all 1.0.21 [248 kB] Get: 33 http://deb.debian.org/debian buster/main armhf debhelper all 12.1.1 [1016 kB] Get: 34 http://deb.debian.org/debian buster/main armhf libbsd-dev armhf 0.9.1-2 [222 kB] Get: 35 http://deb.debian.org/debian buster/main armhf libevent-2.1-6 armhf 2.1.8-stable-4 [159 kB] Get: 36 http://deb.debian.org/debian buster/main armhf libevent-core-2.1-6 armhf 2.1.8-stable-4 [118 kB] Get: 37 http://deb.debian.org/debian buster/main armhf libevent-extra-2.1-6 armhf 2.1.8-stable-4 [90.9 kB] Get: 38 http://deb.debian.org/debian buster/main armhf libevent-pthreads-2.1-6 armhf 2.1.8-stable-4 [47.6 kB] Get: 39 http://deb.debian.org/debian buster/main armhf libssl1.1 armhf 1.1.1d-0+deb10u3 [1299 kB] Get: 40 http://deb.debian.org/debian buster/main armhf libevent-openssl-2.1-6 armhf 2.1.8-stable-4 [52.2 kB] Get: 41 http://deb.debian.org/debian buster/main armhf libevent-dev armhf 2.1.8-stable-4 [291 kB] Fetched 20.5 MB in 2s (8752 kB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package libbsd0:armhf. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 18932 files and directories currently installed.) Preparing to unpack .../00-libbsd0_0.9.1-2_armhf.deb ... Unpacking libbsd0:armhf (0.9.1-2) ... Selecting previously unselected package bsdmainutils. Preparing to unpack .../01-bsdmainutils_11.1.2+b1_armhf.deb ... Unpacking bsdmainutils (11.1.2+b1) ... Selecting previously unselected package libuchardet0:armhf. Preparing to unpack .../02-libuchardet0_0.0.6-3_armhf.deb ... Unpacking libuchardet0:armhf (0.0.6-3) ... Selecting previously unselected package groff-base. Preparing to unpack .../03-groff-base_1.22.4-3_armhf.deb ... Unpacking groff-base (1.22.4-3) ... Selecting previously unselected package libpipeline1:armhf. Preparing to unpack .../04-libpipeline1_1.5.1-2_armhf.deb ... Unpacking libpipeline1:armhf (1.5.1-2) ... Selecting previously unselected package man-db. Preparing to unpack .../05-man-db_2.8.5-2_armhf.deb ... Unpacking man-db (2.8.5-2) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../06-sensible-utils_0.0.12_all.deb ... Unpacking sensible-utils (0.0.12) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../07-libmagic-mgc_1%3a5.35-4+deb10u1_armhf.deb ... Unpacking libmagic-mgc (1:5.35-4+deb10u1) ... Selecting previously unselected package libmagic1:armhf. Preparing to unpack .../08-libmagic1_1%3a5.35-4+deb10u1_armhf.deb ... Unpacking libmagic1:armhf (1:5.35-4+deb10u1) ... Selecting previously unselected package file. Preparing to unpack .../09-file_1%3a5.35-4+deb10u1_armhf.deb ... Unpacking file (1:5.35-4+deb10u1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../10-gettext-base_0.19.8.1-9_armhf.deb ... Unpacking gettext-base (0.19.8.1-9) ... Selecting previously unselected package libsigsegv2:armhf. Preparing to unpack .../11-libsigsegv2_2.12-2_armhf.deb ... Unpacking libsigsegv2:armhf (2.12-2) ... Selecting previously unselected package m4. Preparing to unpack .../12-m4_1.4.18-2_armhf.deb ... Unpacking m4 (1.4.18-2) ... Selecting previously unselected package autoconf. Preparing to unpack .../13-autoconf_2.69-11_all.deb ... Unpacking autoconf (2.69-11) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../14-autotools-dev_20180224.1_all.deb ... Unpacking autotools-dev (20180224.1) ... Selecting previously unselected package automake. Preparing to unpack .../15-automake_1%3a1.16.1-4_all.deb ... Unpacking automake (1:1.16.1-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../16-autopoint_0.19.8.1-9_all.deb ... Unpacking autopoint (0.19.8.1-9) ... Selecting previously unselected package libtool. Preparing to unpack .../17-libtool_2.4.6-9_all.deb ... Unpacking libtool (2.4.6-9) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../18-dh-autoreconf_19_all.deb ... Unpacking dh-autoreconf (19) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../19-libarchive-zip-perl_1.64-1_all.deb ... Unpacking libarchive-zip-perl (1.64-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../20-libfile-stripnondeterminism-perl_1.1.2-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.1.2-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../21-dh-strip-nondeterminism_1.1.2-1_all.deb ... Unpacking dh-strip-nondeterminism (1.1.2-1) ... Selecting previously unselected package libelf1:armhf. Preparing to unpack .../22-libelf1_0.176-1.1_armhf.deb ... Unpacking libelf1:armhf (0.176-1.1) ... Selecting previously unselected package dwz. Preparing to unpack .../23-dwz_0.12-3_armhf.deb ... Unpacking dwz (0.12-3) ... Selecting previously unselected package libglib2.0-0:armhf. Preparing to unpack .../24-libglib2.0-0_2.58.3-2+deb10u2_armhf.deb ... Unpacking libglib2.0-0:armhf (2.58.3-2+deb10u2) ... Selecting previously unselected package libicu63:armhf. Preparing to unpack .../25-libicu63_63.1-6+deb10u1_armhf.deb ... Unpacking libicu63:armhf (63.1-6+deb10u1) ... Selecting previously unselected package libxml2:armhf. Preparing to unpack .../26-libxml2_2.9.4+dfsg1-7+b3_armhf.deb ... Unpacking libxml2:armhf (2.9.4+dfsg1-7+b3) ... Selecting previously unselected package libcroco3:armhf. Preparing to unpack .../27-libcroco3_0.6.12-3_armhf.deb ... Unpacking libcroco3:armhf (0.6.12-3) ... Selecting previously unselected package libncurses6:armhf. Preparing to unpack .../28-libncurses6_6.1+20181013-2+deb10u2_armhf.deb ... Unpacking libncurses6:armhf (6.1+20181013-2+deb10u2) ... Selecting previously unselected package gettext. Preparing to unpack .../29-gettext_0.19.8.1-9_armhf.deb ... Unpacking gettext (0.19.8.1-9) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../30-intltool-debian_0.35.0+20060710.5_all.deb ... Unpacking intltool-debian (0.35.0+20060710.5) ... Selecting previously unselected package po-debconf. Preparing to unpack .../31-po-debconf_1.0.21_all.deb ... Unpacking po-debconf (1.0.21) ... Selecting previously unselected package debhelper. Preparing to unpack .../32-debhelper_12.1.1_all.deb ... Unpacking debhelper (12.1.1) ... Selecting previously unselected package libbsd-dev:armhf. Preparing to unpack .../33-libbsd-dev_0.9.1-2_armhf.deb ... Unpacking libbsd-dev:armhf (0.9.1-2) ... Selecting previously unselected package libevent-2.1-6:armhf. Preparing to unpack .../34-libevent-2.1-6_2.1.8-stable-4_armhf.deb ... Unpacking libevent-2.1-6:armhf (2.1.8-stable-4) ... Selecting previously unselected package libevent-core-2.1-6:armhf. Preparing to unpack .../35-libevent-core-2.1-6_2.1.8-stable-4_armhf.deb ... Unpacking libevent-core-2.1-6:armhf (2.1.8-stable-4) ... Selecting previously unselected package libevent-extra-2.1-6:armhf. Preparing to unpack .../36-libevent-extra-2.1-6_2.1.8-stable-4_armhf.deb ... Unpacking libevent-extra-2.1-6:armhf (2.1.8-stable-4) ... Selecting previously unselected package libevent-pthreads-2.1-6:armhf. Preparing to unpack .../37-libevent-pthreads-2.1-6_2.1.8-stable-4_armhf.deb ... Unpacking libevent-pthreads-2.1-6:armhf (2.1.8-stable-4) ... Selecting previously unselected package libssl1.1:armhf. Preparing to unpack .../38-libssl1.1_1.1.1d-0+deb10u3_armhf.deb ... Unpacking libssl1.1:armhf (1.1.1d-0+deb10u3) ... Selecting previously unselected package libevent-openssl-2.1-6:armhf. Preparing to unpack .../39-libevent-openssl-2.1-6_2.1.8-stable-4_armhf.deb ... Unpacking libevent-openssl-2.1-6:armhf (2.1.8-stable-4) ... Selecting previously unselected package libevent-dev. Preparing to unpack .../40-libevent-dev_2.1.8-stable-4_armhf.deb ... Unpacking libevent-dev (2.1.8-stable-4) ... Setting up libpipeline1:armhf (1.5.1-2) ... Setting up libmagic-mgc (1:5.35-4+deb10u1) ... Setting up libarchive-zip-perl (1.64-1) ... Setting up libglib2.0-0:armhf (2.58.3-2+deb10u2) ... No schema files found: doing nothing. Setting up libssl1.1:armhf (1.1.1d-0+deb10u3) ... Setting up libmagic1:armhf (1:5.35-4+deb10u1) ... Setting up gettext-base (0.19.8.1-9) ... Setting up file (1:5.35-4+deb10u1) ... Setting up libicu63:armhf (63.1-6+deb10u1) ... Setting up autotools-dev (20180224.1) ... Setting up libncurses6:armhf (6.1+20181013-2+deb10u2) ... Setting up libsigsegv2:armhf (2.12-2) ... Setting up autopoint (0.19.8.1-9) ... Setting up libevent-core-2.1-6:armhf (2.1.8-stable-4) ... Setting up libevent-2.1-6:armhf (2.1.8-stable-4) ... Setting up sensible-utils (0.0.12) ... Setting up libuchardet0:armhf (0.0.6-3) ... Setting up libbsd0:armhf (0.9.1-2) ... Setting up libelf1:armhf (0.176-1.1) ... Setting up libxml2:armhf (2.9.4+dfsg1-7+b3) ... Setting up libbsd-dev:armhf (0.9.1-2) ... Setting up libevent-extra-2.1-6:armhf (2.1.8-stable-4) ... Setting up libfile-stripnondeterminism-perl (1.1.2-1) ... Setting up libevent-pthreads-2.1-6:armhf (2.1.8-stable-4) ... Setting up libtool (2.4.6-9) ... Setting up libevent-openssl-2.1-6:armhf (2.1.8-stable-4) ... Setting up m4 (1.4.18-2) ... Setting up bsdmainutils (11.1.2+b1) ... update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode Setting up libevent-dev (2.1.8-stable-4) ... Setting up libcroco3:armhf (0.6.12-3) ... Setting up autoconf (2.69-11) ... Setting up dwz (0.12-3) ... Setting up groff-base (1.22.4-3) ... Setting up automake (1:1.16.1-4) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up gettext (0.19.8.1-9) ... Setting up man-db (2.8.5-2) ... Not building database; man-db/auto-update is not 'true'. Setting up intltool-debian (0.35.0+20060710.5) ... Setting up po-debconf (1.0.21) ... Setting up debhelper (12.1.1) ... Setting up dh-autoreconf (19) ... Setting up dh-strip-nondeterminism (1.1.2-1) ... Processing triggers for libc-bin (2.28-10) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.23-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/trickle-1.07/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b dpkg-buildpackage: info: source package trickle dpkg-buildpackage: info: source version 1.07-10.1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Mattia Rizzolo dpkg-source --before-build . dpkg-buildpackage: info: host architecture armhf fakeroot debian/rules clean dh_testdir dh_testroot rm -f build-arch-stamp [ ! -f Makefile ] || /usr/bin/make distclean dh_autoreconf_clean dh_clean dh_clean: Compatibility levels before 9 are deprecated (level 7 in use) debian/rules build dh_testdir dh_autoreconf aclocal: warning: autoconf input should be named 'configure.ac', not 'configure.in' libtoolize: putting auxiliary files in '.'. libtoolize: copying file './ltmain.sh' libtoolize: Consider adding 'AC_CONFIG_MACRO_DIRS([m4])' to configure.in, libtoolize: and rerunning libtoolize and aclocal. libtoolize: Consider adding '-I m4' to ACLOCAL_AMFLAGS in Makefile.am. libtoolize: 'AC_PROG_RANLIB' is rendered obsolete by 'LT_INIT' aclocal: warning: autoconf input should be named 'configure.ac', not 'configure.in' autoheader: WARNING: Using auxiliary files such as `acconfig.h', `config.h.bot' autoheader: WARNING: and `config.h.top', to define templates for `config.h.in' autoheader: WARNING: is deprecated and discouraged. autoheader: autoheader: WARNING: Using the third argument of `AC_DEFINE' and autoheader: WARNING: `AC_DEFINE_UNQUOTED' allows one to define a template without autoheader: WARNING: `acconfig.h': autoheader: autoheader: WARNING: AC_DEFINE([NEED_FUNC_MAIN], 1, autoheader: [Define if a function `main' is needed.]) autoheader: autoheader: WARNING: More sophisticated templates can also be produced, see the autoheader: WARNING: documentation. automake: warning: autoconf input should be named 'configure.ac', not 'configure.in' configure.in:7: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. For more info, see: configure.in:7: https://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_005fINIT_005fAUTOMAKE-invocation configure.in:10: installing './compile' configure.in:7: installing './missing' automake: warning: autoconf input should be named 'configure.ac', not 'configure.in' CPPFLAGS="-Wdate-time -D_FORTIFY_SOURCE=2" CFLAGS="-g -O2 -ffile-prefix-map=/build/trickle-1.07=. -fstack-protector-strong -Wformat -Werror=format-security" CXXFLAGS="-g -O2 -ffile-prefix-map=/build/trickle-1.07=. -fstack-protector-strong -Wformat -Werror=format-security" \ LDFLAGS="-Wl,-z,relro" ./configure --prefix=/usr \ --mandir=/usr/share/man --sysconfdir=/etc --with-pic checking build system type... armv7l-unknown-linux-gnueabihf checking host system type... armv7l-unknown-linux-gnueabihf checking target system type... armv7l-unknown-linux-gnueabihf checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking whether make supports the include directive... yes (GNU style) checking dependency style of gcc... none checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert armv7l-unknown-linux-gnueabihf file names to armv7l-unknown-linux-gnueabihf format... func_convert_file_noop checking how to convert armv7l-unknown-linux-gnueabihf file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking whether make sets $(MAKE)... (cached) yes checking for ranlib... (cached) ranlib checking for socket in -lsocket... no checking for gethostbyname in -lnsl... yes checking for dlopen in -ldl... yes checking for err in -lc... yes checking for ANSI C header files... (cached) yes checking for sys/wait.h that is POSIX.1 compatible... yes checking if libc defines __progname... yes checking sys/ioctl.h usability... yes checking sys/ioctl.h presence... yes checking for sys/ioctl.h... yes checking sys/time.h usability... yes checking sys/time.h presence... yes checking for sys/time.h... yes checking err.h usability... yes checking err.h presence... yes checking for err.h... yes checking time.h usability... yes checking time.h presence... yes checking for time.h... yes checking for unistd.h... (cached) yes checking for stdint.h... (cached) yes checking netinet/in.h usability... yes checking netinet/in.h presence... yes checking for netinet/in.h... yes checking asm/poll.h usability... yes checking asm/poll.h presence... yes checking for asm/poll.h... yes checking for an ANSI C-conforming const... yes checking for pid_t... yes checking for size_t... yes checking whether time.h and sys/time.h may both be included... yes checking for u_int64_t... yes checking for u_int32_t... yes checking for u_int16_t... yes checking for u_int8_t... yes checking for in_addr_t... yes checking whether gcc needs -traditional... no checking return type of signal handlers... void checking for socket... yes checking for strlcat... no checking for strlcpy... no checking for daemon... yes checking for setenv... yes checking for strsep... yes checking for sendfile... yes checking for libevent... yes checking if underscores are needed for symbols... no checking if we can access libc without dlopen... yes checking for sendfile... (cached) yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating config.h config.status: executing depfiles commands config.status: executing libtool commands dh_testdir /usr/bin/make make[1]: Entering directory '/build/trickle-1.07' /usr/bin/make all-am make[2]: Entering directory '/build/trickle-1.07' gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Icompat -g -O2 -ffile-prefix-map=/build/trickle-1.07=. -fstack-protector-strong -Wformat -Werror=format-security -c -o trickle.o trickle.c trickle.c: In function 'main': trickle.c:49:48: warning: unused variable 'pathp' [-Wunused-variable] char buf[MAXPATHLEN], sockname[MAXPATHLEN], **pathp; ^~~~~ trickle.c:47:7: warning: variable 'latency' set but not used [-Wunused-but-set-variable] *latency = "0"; ^~~~~~~ gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Icompat -g -O2 -ffile-prefix-map=/build/trickle-1.07=. -fstack-protector-strong -Wformat -Werror=format-security -c -o util.o util.c gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Icompat -g -O2 -ffile-prefix-map=/build/trickle-1.07=. -fstack-protector-strong -Wformat -Werror=format-security -c -o getopt.o getopt.c /bin/bash ./libtool --tag=CC --mode=link gcc -Wall -Icompat -g -O2 -ffile-prefix-map=/build/trickle-1.07=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -o trickle trickle.o util.o getopt.o -lbsd -lnsl -ldl libtool: link: gcc -Wall -Icompat -g -O2 -ffile-prefix-map=/build/trickle-1.07=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z -Wl,relro -o trickle trickle.o util.o getopt.o -lbsd -lnsl -ldl gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Icompat -g -O2 -ffile-prefix-map=/build/trickle-1.07=. -fstack-protector-strong -Wformat -Werror=format-security -c -o trickled.o trickled.c gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Icompat -g -O2 -ffile-prefix-map=/build/trickle-1.07=. -fstack-protector-strong -Wformat -Werror=format-security -c -o atomicio.o atomicio.c gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Icompat -g -O2 -ffile-prefix-map=/build/trickle-1.07=. -fstack-protector-strong -Wformat -Werror=format-security -c -o print.o print.c gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Icompat -g -O2 -ffile-prefix-map=/build/trickle-1.07=. -fstack-protector-strong -Wformat -Werror=format-security -c -o bwstat.o bwstat.c bwstat.c: In function 'bwstat_getdelay': bwstat.c:151:7: warning: variable 'initent' set but not used [-Wunused-but-set-variable] uint initent; ^~~~~~~ gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Icompat -g -O2 -ffile-prefix-map=/build/trickle-1.07=. -fstack-protector-strong -Wformat -Werror=format-security -c -o client.o client.c gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Icompat -g -O2 -ffile-prefix-map=/build/trickle-1.07=. -fstack-protector-strong -Wformat -Werror=format-security -c -o conf.o conf.c conf.c: In function 'conf_decode_base64': conf.c:548:17: warning: pointer targets in passing argument 1 of 'strcmp' differ in signedness [-Wpointer-sign] if (!strcmp (buf, "==")) ^~~ In file included from conf.c:55: /usr/include/string.h:136:12: note: expected 'const char *' but argument is of type 'u_char *' {aka 'unsigned char *'} extern int strcmp (const char *__s1, const char *__s2) ^~~~~~ conf.c:564:17: warning: pointer targets in passing argument 1 of 'strcmp' differ in signedness [-Wpointer-sign] if (strcmp (buf, "=")) ^~~ In file included from conf.c:55: /usr/include/string.h:136:12: note: expected 'const char *' but argument is of type 'u_char *' {aka 'unsigned char *'} extern int strcmp (const char *__s1, const char *__s2) ^~~~~~ gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Icompat -g -O2 -ffile-prefix-map=/build/trickle-1.07=. -fstack-protector-strong -Wformat -Werror=format-security -c -o cleanup.o cleanup.c gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Icompat -g -O2 -ffile-prefix-map=/build/trickle-1.07=. -fstack-protector-strong -Wformat -Werror=format-security -c -o xdr.o xdr.c xdr.c: In function 'xdr_msg': xdr.c:106:25: warning: passing argument 5 of 'xdr_union' from incompatible pointer type [-Wincompatible-pointer-types] xdr_msg_discrim, _xdr_void)); ^~~~~~~~~ xdr.c:15:7: note: in definition of macro 'X' if (!x) \ ^ In file included from /usr/include/rpc/rpc.h:42, from xdr.c:10: /usr/include/rpc/xdr.h:317:15: note: expected 'xdrproc_t' {aka 'int (*)(struct XDR *, void *, ...)'} but argument is of type 'bool_t (*)(void)' {aka 'int (*)(void)'} xdrproc_t __dfault) __THROW; ~~~~~~~~~~^~~~~~~~ xdr.c: In function 'msg2xdr': xdr.c:116:23: warning: pointer targets in passing argument 2 of 'xdrmem_create' differ in signedness [-Wpointer-sign] xdrmem_create(&xdrs, buf, *buflen, XDR_ENCODE); ^~~ In file included from /usr/include/rpc/rpc.h:42, from xdr.c:10: /usr/include/rpc/xdr.h:350:13: note: expected 'caddr_t' {aka 'char * const'} but argument is of type 'u_char *' {aka 'unsigned char *'} extern void xdrmem_create (XDR *__xdrs, const caddr_t __addr, ^~~~~~~~~~~~~ xdr.c: In function 'xdr2msg': xdr.c:136:23: warning: pointer targets in passing argument 2 of 'xdrmem_create' differ in signedness [-Wpointer-sign] xdrmem_create(&xdrs, buf, buflen, XDR_DECODE); ^~~ In file included from /usr/include/rpc/rpc.h:42, from xdr.c:10: /usr/include/rpc/xdr.h:350:13: note: expected 'caddr_t' {aka 'char * const'} but argument is of type 'u_char *' {aka 'unsigned char *'} extern void xdrmem_create (XDR *__xdrs, const caddr_t __addr, ^~~~~~~~~~~~~ /bin/bash ./libtool --tag=CC --mode=link gcc -Wall -Icompat -g -O2 -ffile-prefix-map=/build/trickle-1.07=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -o trickled trickled.o atomicio.o print.o bwstat.o client.o conf.o util.o cleanup.o getopt.o xdr.o -levent -lbsd -lnsl -ldl libtool: link: gcc -Wall -Icompat -g -O2 -ffile-prefix-map=/build/trickle-1.07=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z -Wl,relro -o trickled trickled.o atomicio.o print.o bwstat.o client.o conf.o util.o cleanup.o getopt.o xdr.o -levent -lbsd -lnsl -ldl gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Icompat -g -O2 -ffile-prefix-map=/build/trickle-1.07=. -fstack-protector-strong -Wformat -Werror=format-security -c -o tricklectl.o tricklectl.c gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Icompat -g -O2 -ffile-prefix-map=/build/trickle-1.07=. -fstack-protector-strong -Wformat -Werror=format-security -c -o trickledu.o trickledu.c /bin/bash ./libtool --tag=CC --mode=link gcc -Wall -Icompat -g -O2 -ffile-prefix-map=/build/trickle-1.07=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -o tricklectl tricklectl.o trickledu.o atomicio.o xdr.o -lbsd -lnsl -ldl libtool: link: gcc -Wall -Icompat -g -O2 -ffile-prefix-map=/build/trickle-1.07=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z -Wl,relro -o tricklectl tricklectl.o trickledu.o atomicio.o xdr.o -lbsd -lnsl -ldl /bin/bash ./libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Icompat -g -O2 -ffile-prefix-map=/build/trickle-1.07=. -fstack-protector-strong -Wformat -Werror=format-security -c -o strlcat.lo strlcat.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Icompat -g -O2 -ffile-prefix-map=/build/trickle-1.07=. -fstack-protector-strong -Wformat -Werror=format-security -c strlcat.c -fPIC -DPIC -o .libs/strlcat.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Icompat -g -O2 -ffile-prefix-map=/build/trickle-1.07=. -fstack-protector-strong -Wformat -Werror=format-security -c strlcat.c -fPIC -DPIC -o strlcat.o >/dev/null 2>&1 /bin/bash ./libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Icompat -g -O2 -ffile-prefix-map=/build/trickle-1.07=. -fstack-protector-strong -Wformat -Werror=format-security -c -o strlcpy.lo strlcpy.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Icompat -g -O2 -ffile-prefix-map=/build/trickle-1.07=. -fstack-protector-strong -Wformat -Werror=format-security -c strlcpy.c -fPIC -DPIC -o .libs/strlcpy.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Icompat -g -O2 -ffile-prefix-map=/build/trickle-1.07=. -fstack-protector-strong -Wformat -Werror=format-security -c strlcpy.c -fPIC -DPIC -o strlcpy.o >/dev/null 2>&1 /bin/bash ./libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Icompat -g -O2 -ffile-prefix-map=/build/trickle-1.07=. -fstack-protector-strong -Wformat -Werror=format-security -c -o trickle-overload.lo trickle-overload.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Icompat -g -O2 -ffile-prefix-map=/build/trickle-1.07=. -fstack-protector-strong -Wformat -Werror=format-security -c trickle-overload.c -fPIC -DPIC -o .libs/trickle-overload.o trickle-overload.c: In function 'read': trickle-overload.c:658:27: warning: pointer targets in passing argument 2 of 'delay' differ in signedness [-Wpointer-sign] if (!(eagain = delay(fd, &xnbytes, TRICKLE_RECV) == TRICKLE_WOULDBLOCK)) { ^~~~~~~~ trickle-overload.c:150:24: note: expected 'ssize_t *' {aka 'int *'} but argument is of type 'size_t *' {aka 'unsigned int *'} static int delay(int, ssize_t *, short); ^~~~~ trickle-overload.c: In function 'readv': trickle-overload.c:693:27: warning: pointer targets in passing argument 2 of 'delay' differ in signedness [-Wpointer-sign] if (!(eagain = delay(fd, &len, TRICKLE_RECV) == TRICKLE_WOULDBLOCK)) { ^~~~ trickle-overload.c:150:24: note: expected 'ssize_t *' {aka 'int *'} but argument is of type 'size_t *' {aka 'unsigned int *'} static int delay(int, ssize_t *, short); ^~~~~ trickle-overload.c: In function 'recv': trickle-overload.c:722:29: warning: pointer targets in passing argument 2 of 'delay' differ in signedness [-Wpointer-sign] if (!(eagain = delay(sock, &xlen, TRICKLE_RECV) == TRICKLE_WOULDBLOCK)) { ^~~~~ trickle-overload.c:150:24: note: expected 'ssize_t *' {aka 'int *'} but argument is of type 'size_t *' {aka 'unsigned int *'} static int delay(int, ssize_t *, short); ^~~~~ trickle-overload.c: In function 'recvfrom': trickle-overload.c:759:29: warning: pointer targets in passing argument 2 of 'delay' differ in signedness [-Wpointer-sign] if (!(eagain = delay(sock, &xlen, TRICKLE_RECV) == TRICKLE_WOULDBLOCK)) { ^~~~~ trickle-overload.c:150:24: note: expected 'ssize_t *' {aka 'int *'} but argument is of type 'size_t *' {aka 'unsigned int *'} static int delay(int, ssize_t *, short); ^~~~~ trickle-overload.c: In function 'write': trickle-overload.c:789:27: warning: pointer targets in passing argument 2 of 'delay' differ in signedness [-Wpointer-sign] if (!(eagain = delay(fd, &xlen, TRICKLE_SEND) == TRICKLE_WOULDBLOCK)) { ^~~~~ trickle-overload.c:150:24: note: expected 'ssize_t *' {aka 'int *'} but argument is of type 'size_t *' {aka 'unsigned int *'} static int delay(int, ssize_t *, short); ^~~~~ trickle-overload.c: In function 'writev': trickle-overload.c:823:27: warning: pointer targets in passing argument 2 of 'delay' differ in signedness [-Wpointer-sign] if (!(eagain = delay(fd, &len, TRICKLE_SEND) == TRICKLE_WOULDBLOCK)) { ^~~~ trickle-overload.c:150:24: note: expected 'ssize_t *' {aka 'int *'} but argument is of type 'size_t *' {aka 'unsigned int *'} static int delay(int, ssize_t *, short); ^~~~~ trickle-overload.c: In function 'send': trickle-overload.c:853:29: warning: pointer targets in passing argument 2 of 'delay' differ in signedness [-Wpointer-sign] if (!(eagain = delay(sock, &xlen, TRICKLE_SEND) == TRICKLE_WOULDBLOCK)) { ^~~~~ trickle-overload.c:150:24: note: expected 'ssize_t *' {aka 'int *'} but argument is of type 'size_t *' {aka 'unsigned int *'} static int delay(int, ssize_t *, short); ^~~~~ trickle-overload.c: In function 'sendto': trickle-overload.c:885:29: warning: pointer targets in passing argument 2 of 'delay' differ in signedness [-Wpointer-sign] if (!(eagain = delay(sock, &xlen, TRICKLE_SEND) == TRICKLE_WOULDBLOCK)) { ^~~~~ trickle-overload.c:150:24: note: expected 'ssize_t *' {aka 'int *'} but argument is of type 'size_t *' {aka 'unsigned int *'} static int delay(int, ssize_t *, short); ^~~~~ trickle-overload.c: In function 'sendfile': trickle-overload.c:1026:15: warning: pointer targets in passing argument 2 of 'delay' differ in signedness [-Wpointer-sign] delay(in_fd, &inbytes, TRICKLE_RECV); ^~~~~~~~ trickle-overload.c:150:24: note: expected 'ssize_t *' {aka 'int *'} but argument is of type 'size_t *' {aka 'unsigned int *'} static int delay(int, ssize_t *, short); ^~~~~ trickle-overload.c:1027:16: warning: pointer targets in passing argument 2 of 'delay' differ in signedness [-Wpointer-sign] delay(out_fd, &outbytes, TRICKLE_SEND); ^~~~~~~~~ trickle-overload.c:150:24: note: expected 'ssize_t *' {aka 'int *'} but argument is of type 'size_t *' {aka 'unsigned int *'} static int delay(int, ssize_t *, short); ^~~~~ trickle-overload.c: In function 'fread': trickle-overload.c:1047:39: warning: pointer targets in passing argument 2 of 'delay' differ in signedness [-Wpointer-sign] if (!(eagain = delay(fileno(stream), &xnbytes, TRICKLE_RECV) ^~~~~~~~ trickle-overload.c:150:24: note: expected 'ssize_t *' {aka 'int *'} but argument is of type 'size_t *' {aka 'unsigned int *'} static int delay(int, ssize_t *, short); ^~~~~ trickle-overload.c: In function 'fwrite': trickle-overload.c:1078:39: warning: pointer targets in passing argument 2 of 'delay' differ in signedness [-Wpointer-sign] if (!(eagain = delay(fileno(stream), &xlen, TRICKLE_SEND) ^~~~~ trickle-overload.c:150:24: note: expected 'ssize_t *' {aka 'int *'} but argument is of type 'size_t *' {aka 'unsigned int *'} static int delay(int, ssize_t *, short); ^~~~~ trickle-overload.c: In function 'getdelay': trickle-overload.c:1147:50: warning: pointer targets in passing argument 2 of 'trickled_getdelay' differ in signedness [-Wpointer-sign] if (trickled && (xtv = trickled_getdelay(which, len)) != NULL) ^~~ In file included from trickle-overload.c:56: trickledu.h:20:17: note: expected 'size_t *' {aka 'unsigned int *'} but argument is of type 'ssize_t *' {aka 'int *'} struct timeval *trickled_getdelay(short, size_t *); ^~~~~~~~~~~~~~~~~ trickle-overload.c:1153:36: warning: pointer targets in passing argument 2 of 'bwstat_getdelay' differ in signedness [-Wpointer-sign] return (bwstat_getdelay(sd->stat, len, xlim, which)); ^~~ In file included from trickle-overload.c:52: bwstat.h:38:17: note: expected 'size_t *' {aka 'unsigned int *'} but argument is of type 'ssize_t *' {aka 'int *'} struct timeval *bwstat_getdelay(struct bwstat *, size_t *, uint, short); ^~~~~~~~~~~~~~~ libtool: compile: gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Icompat -g -O2 -ffile-prefix-map=/build/trickle-1.07=. -fstack-protector-strong -Wformat -Werror=format-security -c trickle-overload.c -fPIC -DPIC -o trickle-overload.o >/dev/null 2>&1 /bin/bash ./libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Icompat -g -O2 -ffile-prefix-map=/build/trickle-1.07=. -fstack-protector-strong -Wformat -Werror=format-security -c -o bwstat.lo bwstat.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Icompat -g -O2 -ffile-prefix-map=/build/trickle-1.07=. -fstack-protector-strong -Wformat -Werror=format-security -c bwstat.c -fPIC -DPIC -o .libs/bwstat.o bwstat.c: In function 'bwstat_getdelay': bwstat.c:151:7: warning: variable 'initent' set but not used [-Wunused-but-set-variable] uint initent; ^~~~~~~ libtool: compile: gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Icompat -g -O2 -ffile-prefix-map=/build/trickle-1.07=. -fstack-protector-strong -Wformat -Werror=format-security -c bwstat.c -fPIC -DPIC -o bwstat.o >/dev/null 2>&1 /bin/bash ./libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Icompat -g -O2 -ffile-prefix-map=/build/trickle-1.07=. -fstack-protector-strong -Wformat -Werror=format-security -c -o trickledu.lo trickledu.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Icompat -g -O2 -ffile-prefix-map=/build/trickle-1.07=. -fstack-protector-strong -Wformat -Werror=format-security -c trickledu.c -fPIC -DPIC -o .libs/trickledu.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Icompat -g -O2 -ffile-prefix-map=/build/trickle-1.07=. -fstack-protector-strong -Wformat -Werror=format-security -c trickledu.c -fPIC -DPIC -o trickledu.o >/dev/null 2>&1 /bin/bash ./libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Icompat -g -O2 -ffile-prefix-map=/build/trickle-1.07=. -fstack-protector-strong -Wformat -Werror=format-security -c -o atomicio.lo atomicio.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Icompat -g -O2 -ffile-prefix-map=/build/trickle-1.07=. -fstack-protector-strong -Wformat -Werror=format-security -c atomicio.c -fPIC -DPIC -o .libs/atomicio.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Icompat -g -O2 -ffile-prefix-map=/build/trickle-1.07=. -fstack-protector-strong -Wformat -Werror=format-security -c atomicio.c -fPIC -DPIC -o atomicio.o >/dev/null 2>&1 /bin/bash ./libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Icompat -g -O2 -ffile-prefix-map=/build/trickle-1.07=. -fstack-protector-strong -Wformat -Werror=format-security -c -o xdr.lo xdr.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Icompat -g -O2 -ffile-prefix-map=/build/trickle-1.07=. -fstack-protector-strong -Wformat -Werror=format-security -c xdr.c -fPIC -DPIC -o .libs/xdr.o xdr.c: In function 'xdr_msg': xdr.c:106:25: warning: passing argument 5 of 'xdr_union' from incompatible pointer type [-Wincompatible-pointer-types] xdr_msg_discrim, _xdr_void)); ^~~~~~~~~ xdr.c:15:7: note: in definition of macro 'X' if (!x) \ ^ In file included from /usr/include/rpc/rpc.h:42, from xdr.c:10: /usr/include/rpc/xdr.h:317:15: note: expected 'xdrproc_t' {aka 'int (*)(struct XDR *, void *, ...)'} but argument is of type 'bool_t (*)(void)' {aka 'int (*)(void)'} xdrproc_t __dfault) __THROW; ~~~~~~~~~~^~~~~~~~ xdr.c: In function 'msg2xdr': xdr.c:116:23: warning: pointer targets in passing argument 2 of 'xdrmem_create' differ in signedness [-Wpointer-sign] xdrmem_create(&xdrs, buf, *buflen, XDR_ENCODE); ^~~ In file included from /usr/include/rpc/rpc.h:42, from xdr.c:10: /usr/include/rpc/xdr.h:350:13: note: expected 'caddr_t' {aka 'char * const'} but argument is of type 'u_char *' {aka 'unsigned char *'} extern void xdrmem_create (XDR *__xdrs, const caddr_t __addr, ^~~~~~~~~~~~~ xdr.c: In function 'xdr2msg': xdr.c:136:23: warning: pointer targets in passing argument 2 of 'xdrmem_create' differ in signedness [-Wpointer-sign] xdrmem_create(&xdrs, buf, buflen, XDR_DECODE); ^~~ In file included from /usr/include/rpc/rpc.h:42, from xdr.c:10: /usr/include/rpc/xdr.h:350:13: note: expected 'caddr_t' {aka 'char * const'} but argument is of type 'u_char *' {aka 'unsigned char *'} extern void xdrmem_create (XDR *__xdrs, const caddr_t __addr, ^~~~~~~~~~~~~ libtool: compile: gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Icompat -g -O2 -ffile-prefix-map=/build/trickle-1.07=. -fstack-protector-strong -Wformat -Werror=format-security -c xdr.c -fPIC -DPIC -o xdr.o >/dev/null 2>&1 /bin/bash ./libtool --mode=link gcc -g -O2 -ffile-prefix-map=/build/trickle-1.07=. -fstack-protector-strong -Wformat -Werror=format-security -o libtmptrickle-overload.so.la \ -rpath /usr/lib/trickle strlcat.lo strlcpy.lo trickle-overload.lo bwstat.lo trickledu.lo atomicio.lo xdr.lo -lnsl -ldl \ -Wl,-z,relro -module -avoid-version -nostdlib -ldl libtool: link: gcc -shared -fPIC -DPIC .libs/strlcat.o .libs/strlcpy.o .libs/trickle-overload.o .libs/bwstat.o .libs/trickledu.o .libs/atomicio.o .libs/xdr.o -lnsl -ldl -g -O2 -fstack-protector-strong -Wl,-z -Wl,relro -Wl,-soname -Wl,libtmptrickle-overload.so.so -o .libs/libtmptrickle-overload.so.so libtool: link: ar cru .libs/libtmptrickle-overload.so.a strlcat.o strlcpy.o trickle-overload.o bwstat.o trickledu.o atomicio.o xdr.o ar: `u' modifier ignored since `D' is the default (see `U') libtool: link: ranlib .libs/libtmptrickle-overload.so.a libtool: link: ( cd ".libs" && rm -f "libtmptrickle-overload.so.la" && ln -s "../libtmptrickle-overload.so.la" "libtmptrickle-overload.so.la" ) make[2]: Leaving directory '/build/trickle-1.07' make[1]: Leaving directory '/build/trickle-1.07' touch build-stamp fakeroot debian/rules binary dh_testdir dh_testroot dh_prep dh_installdirs dh_installdirs: Compatibility levels before 9 are deprecated (level 7 in use) /usr/bin/make install DESTDIR=/build/trickle-1.07/debian/trickle make[1]: Entering directory '/build/trickle-1.07' /bin/bash ./libtool --tag=CC --mode=link gcc -Wall -Icompat -g -O2 -ffile-prefix-map=/build/trickle-1.07=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -o trickled trickled.o atomicio.o print.o bwstat.o client.o conf.o util.o cleanup.o getopt.o xdr.o -levent -lbsd -lnsl -ldl libtool: link: gcc -Wall -Icompat -g -O2 -ffile-prefix-map=/build/trickle-1.07=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z -Wl,relro -o trickled trickled.o atomicio.o print.o bwstat.o client.o conf.o util.o cleanup.o getopt.o xdr.o -levent -lbsd -lnsl -ldl /bin/bash ./libtool --tag=CC --mode=link gcc -Wall -Icompat -g -O2 -ffile-prefix-map=/build/trickle-1.07=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -o tricklectl tricklectl.o trickledu.o atomicio.o xdr.o -lbsd -lnsl -ldl libtool: link: gcc -Wall -Icompat -g -O2 -ffile-prefix-map=/build/trickle-1.07=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z -Wl,relro -o tricklectl tricklectl.o trickledu.o atomicio.o xdr.o -lbsd -lnsl -ldl make[2]: Entering directory '/build/trickle-1.07' /bin/mkdir -p '/build/trickle-1.07/debian/trickle/usr/bin' /bin/bash ./libtool --mode=install /usr/bin/install -c trickle trickled tricklectl '/build/trickle-1.07/debian/trickle/usr/bin' libtool: install: /usr/bin/install -c trickle /build/trickle-1.07/debian/trickle/usr/bin/trickle libtool: install: /usr/bin/install -c trickled /build/trickle-1.07/debian/trickle/usr/bin/trickled libtool: install: /usr/bin/install -c tricklectl /build/trickle-1.07/debian/trickle/usr/bin/tricklectl /bin/mkdir -p '/build/trickle-1.07/debian/trickle/usr/share/man/man1' /usr/bin/install -c -m 644 trickle.1 '/build/trickle-1.07/debian/trickle/usr/share/man/man1' /bin/mkdir -p '/build/trickle-1.07/debian/trickle/usr/share/man/man5' /usr/bin/install -c -m 644 trickled.conf.5 '/build/trickle-1.07/debian/trickle/usr/share/man/man5' /bin/mkdir -p '/build/trickle-1.07/debian/trickle/usr/share/man/man8' /usr/bin/install -c -m 644 trickled.8 '/build/trickle-1.07/debian/trickle/usr/share/man/man8' /bin/mkdir -p '/build/trickle-1.07/debian/trickle/usr/lib/trickle' /usr/bin/install -c -m 644 trickle-overload.so '/build/trickle-1.07/debian/trickle/usr/lib/trickle' make[2]: Leaving directory '/build/trickle-1.07' make[1]: Leaving directory '/build/trickle-1.07' dh_testdir dh_testroot dh_install trickled.conf etc dh_install: Compatibility levels before 9 are deprecated (level 7 in use) dh_installdocs -n dh_installdocs: Compatibility levels before 9 are deprecated (level 7 in use) dh_installman debian/tricklectl.8 dh_installman: Compatibility levels before 9 are deprecated (level 7 in use) dh_installchangelogs dh_installchangelogs: Compatibility levels before 9 are deprecated (level 7 in use) dh_strip dh_strip: Compatibility levels before 9 are deprecated (level 7 in use) dh_compress dh_compress: Compatibility levels before 9 are deprecated (level 7 in use) dh_fixperms dh_installdeb dh_installdeb: Compatibility levels before 9 are deprecated (level 7 in use) dh_shlibdeps dh_shlibdeps: Compatibility levels before 9 are deprecated (level 7 in use) dpkg-shlibdeps: warning: package could avoid a useless dependency if debian/trickle/usr/bin/tricklectl debian/trickle/usr/bin/trickle debian/trickle/usr/bin/trickled debian/trickle/usr/lib/trickle/trickle-overload.so were not linked against libnsl.so.1 (they use none of the library's symbols) dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'trickle-dbgsym' in '../trickle-dbgsym_1.07-10.1_armhf.deb'. dpkg-deb: building package 'trickle' in '../trickle_1.07-10.1_armhf.deb'. dpkg-genbuildinfo --build=binary dpkg-genchanges --build=binary >../trickle_1.07-10.1_armhf.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/8122 and its subdirectories I: Current time: Wed May 27 05:27:14 -12 2020 I: pbuilder-time-stamp: 1590600434 Wed May 27 17:27:21 UTC 2020 I: 1st build successful. Starting 2nd build on remote node opi2c-armhf-rb.debian.net. Wed May 27 17:27:21 UTC 2020 I: Preparing to do remote build '2' on opi2c-armhf-rb.debian.net. Wed May 27 17:32:18 UTC 2020 I: Deleting $TMPDIR on opi2c-armhf-rb.debian.net. Wed May 27 17:32:20 UTC 2020 I: trickle_1.07-10.1_armhf.changes: Format: 1.8 Date: Fri, 31 Mar 2017 01:41:27 +0200 Source: trickle Binary: trickle trickle-dbgsym Architecture: armhf Version: 1.07-10.1 Distribution: unstable Urgency: medium Maintainer: Robert Lemmen Changed-By: Mattia Rizzolo Description: trickle - user-space bandwidth shaper Closes: 736887 Changes: trickle (1.07-10.1) unstable; urgency=medium . * Non-maintainer upload. * Use dh-autoreconf to fix FTBFS on ppc64el and update config.{sub, guess} for new arches. Closes: #736887 Checksums-Sha1: 6c2e3a75ff3702fba8a086d0883f76739747a754 100688 trickle-dbgsym_1.07-10.1_armhf.deb d10784109ba4d4f364df6864f7d01cdb3f88d064 4784 trickle_1.07-10.1_armhf.buildinfo fe30b9ccec6d5f952b9d78cc5b1940403dddf0fd 31312 trickle_1.07-10.1_armhf.deb Checksums-Sha256: eff9bfba42ad323c78fbfff5615c98ea3c5016e2863ca519777a53410de07df0 100688 trickle-dbgsym_1.07-10.1_armhf.deb 601481affed2b394159739e27f540b5a60d6eb3a79dd8ffa12b505346ab780db 4784 trickle_1.07-10.1_armhf.buildinfo 26bb457828e8f2b9f50a4fe1b06c854c2d9c1f713b21f995e638e00b197c1b77 31312 trickle_1.07-10.1_armhf.deb Files: ddfd96b2f10fb75ffd8a2cbfde7935fc 100688 debug optional trickle-dbgsym_1.07-10.1_armhf.deb 202fcc08d7e73c4218691dd14438c031 4784 net optional trickle_1.07-10.1_armhf.buildinfo 5dee3e306e725fb4ffc17e55cb6fdc3a 31312 net optional trickle_1.07-10.1_armhf.deb Wed May 27 17:32:22 UTC 2020 I: diffoscope 145 will be used to compare the two builds: # Profiling output for: /usr/bin/diffoscope --html /srv/reproducible-results/rbuild-debian/tmp.ZfXIHvZxbj/trickle_1.07-10.1.diffoscope.html --text /srv/reproducible-results/rbuild-debian/tmp.ZfXIHvZxbj/trickle_1.07-10.1.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/tmp.ZfXIHvZxbj/trickle_1.07-10.1.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/tmp.ZfXIHvZxbj/b1/trickle_1.07-10.1_armhf.changes /srv/reproducible-results/rbuild-debian/tmp.ZfXIHvZxbj/b2/trickle_1.07-10.1_armhf.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 1.124s) 1.124s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.031s) 0.031s 10 calls diffoscope.comparators.binary.FilesystemFile Wed May 27 17:41:45 UTC 2020 I: diffoscope 145 found no differences in the changes files, and a .buildinfo file also exists. Wed May 27 17:41:45 UTC 2020 I: trickle from buster built successfully and reproducibly on armhf. Wed May 27 17:41:46 UTC 2020 I: Submitting .buildinfo files to external archives: Wed May 27 17:41:46 UTC 2020 I: Submitting 8.0K b1/trickle_1.07-10.1_armhf.buildinfo.asc Wed May 27 17:41:47 UTC 2020 I: Submitting 8.0K b2/trickle_1.07-10.1_armhf.buildinfo.asc Wed May 27 17:41:48 UTC 2020 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Wed May 27 17:41:48 UTC 2020 I: Done submitting .buildinfo files. Wed May 27 17:41:48 UTC 2020 I: Removing signed trickle_1.07-10.1_armhf.buildinfo.asc files: removed './b1/trickle_1.07-10.1_armhf.buildinfo.asc' removed './b2/trickle_1.07-10.1_armhf.buildinfo.asc'