Sat Aug 15 12:28:22 UTC 2020 I: starting to build skktools/buster/armhf on jenkins on '2020-08-15 12:28' Sat Aug 15 12:28:22 UTC 2020 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/armhf_50/1777/console.log Sat Aug 15 12:28:22 UTC 2020 I: Downloading source for buster/skktools=1.3.4-1 --2020-08-15 12:28:22-- http://deb.debian.org/debian/pool/main/s/skktools/skktools_1.3.4-1.dsc Connecting to 78.137.99.97:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 1845 (1.8K) Saving to: ‘skktools_1.3.4-1.dsc’ 0K . 100% 260M=0s 2020-08-15 12:28:22 (260 MB/s) - ‘skktools_1.3.4-1.dsc’ saved [1845/1845] Sat Aug 15 12:28:22 UTC 2020 I: skktools_1.3.4-1.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Format: 3.0 (quilt) Source: skktools Binary: skktools Architecture: any Version: 1.3.4-1 Maintainer: Tatsuya Kinoshita Homepage: http://openlab.jp/skk/ Standards-Version: 4.1.5 Vcs-Browser: https://salsa.debian.org/debian/skktools Vcs-Git: https://salsa.debian.org/debian/skktools.git Build-Depends: debhelper (>= 11), libdb-dev, libglib2.0-dev, pkg-config Package-List: skktools deb utils optional arch=any Checksums-Sha1: 084d5744a5fe38564661bf40fb0d805c43c962f3 482860 skktools_1.3.4.orig.tar.gz 4cb9e0f1a84245c0dfb3f36977cdc4f8d505b776 8336 skktools_1.3.4-1.debian.tar.xz Checksums-Sha256: 84cc5d3344362372e0dfe93a84790a193d93730178401a96248961ef161f2168 482860 skktools_1.3.4.orig.tar.gz eb5b9919592b9a3a8f441fcd4b0fea45469a228e238afbcafbc3a2e52700813e 8336 skktools_1.3.4-1.debian.tar.xz Files: 3da70a3c61119da9f97c1baf9735c1b6 482860 skktools_1.3.4.orig.tar.gz 034d6813316548fc582f3fc1b4093166 8336 skktools_1.3.4-1.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQIzBAEBCAAdFiEEAxxiPZTvHz7xexyE5e+rkAgOpjwFAltsUHwACgkQ5e+rkAgO pjzmHw//XfZga+ZA0CoBHlWHMx1KxdNlJJgULKU2oA9t6ir7WBXeH/OSWIiwT33W IGNir7UFj6M9p39cUFnbv09L770Z6QQRtgaw6+YmnhalMdzzLeHx3802ijqtnX4Y /llmUAYgYYj9PBCkM29ZocttLqny3h5Qf5OMevg1yW0OhBdKsY1S3HZtvIx6Ey8l z3NJqigoUIy9z0di2dwts+tQXTuMyb46DwHfJKpbSBBK3p6Y3ELgWoDfcOOW4eyi 8ak9ibnfwMR1bBLyp8Uo8FomDwkwlkM+O53xwFIIaxSujyRFnxJVBKHh+rtAej/E XW2SgweriT+eR15V1B2u+UcyYi10dWDTJJbgasiBdxl3lfLvDDmXWPyro2hpvAL0 cXAQfuMNy9eTtOOY7uVeNn6wB0tvsacP5oulupbaVFLWJjg5iRhD2hoVmyWNBcMh 3kFYH4gFKD3yX7JcR3cICKRsGAdy4On9+uAqEopYEaUzjOLmfhMOXA1xcdpovnYS NdLR9KOrMPlldzg9PwNNq0REHY89OXaqrK1jEZX9YEuevtZQtRe3O6J9IJtDne0j 2cO//4QQdmmzy/lc0xVNA4aGnNPpXifQBrUG5K5+79e+9vBGB0i+3jqwa6A7fIQs zteLWs+RcndvWnglyG0gnYMbjcIAsHmY6wa5SX2yn1v9e02zfkg= =Vfrd -----END PGP SIGNATURE----- Sat Aug 15 12:28:22 UTC 2020 I: Checking whether the package is not for us Sat Aug 15 12:28:23 UTC 2020 I: Starting 1st build on remote node jtx1c-armhf-rb.debian.net. Sat Aug 15 12:28:23 UTC 2020 I: Preparing to do remote build '1' on jtx1c-armhf-rb.debian.net. Sat Aug 15 12:30:02 UTC 2020 I: Deleting $TMPDIR on jtx1c-armhf-rb.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Sat Aug 15 00:28:29 -12 2020 I: pbuilder-time-stamp: 1597494509 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/buster-reproducible-base.tgz] I: copying local configuration I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [skktools_1.3.4-1.dsc] I: copying [./skktools_1.3.4.orig.tar.gz] I: copying [./skktools_1.3.4-1.debian.tar.xz] I: Extracting source gpgv: unknown type of key resource 'trustedkeys.kbx' gpgv: keyblock resource '/root/.gnupg/trustedkeys.kbx': General error gpgv: Signature made Thu Aug 9 02:32:28 2018 -12 gpgv: using RSA key 031C623D94EF1F3EF17B1C84E5EFAB90080EA63C gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./skktools_1.3.4-1.dsc dpkg-source: info: extracting skktools in skktools-1.3.4 dpkg-source: info: unpacking skktools_1.3.4.orig.tar.gz dpkg-source: info: unpacking skktools_1.3.4-1.debian.tar.xz I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/26969/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='armhf' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=3' DISTRIBUTION='' HOME='/root' HOST_ARCH='armhf' IFS=' ' INVOCATION_ID='d0782fe40c4e43c489b98b0ae55dd55c' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='26969' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/tmp.WOe1Ocde0S/pbuilderrc_5aRN --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/buster-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/tmp.WOe1Ocde0S/b1 --logfile b1/build.log skktools_1.3.4-1.dsc' SUDO_GID='111' SUDO_UID='107' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://10.0.0.15:8000/' I: uname -a Linux jtx1c 4.19.0-10-arm64 #1 SMP Debian 4.19.132-1 (2020-07-24) aarch64 GNU/Linux I: ls -l /bin total 3328 -rwxr-xr-x 1 root root 767656 Apr 17 2019 bash -rwxr-xr-x 3 root root 26052 Jul 10 2019 bunzip2 -rwxr-xr-x 3 root root 26052 Jul 10 2019 bzcat lrwxrwxrwx 1 root root 6 Jul 10 2019 bzcmp -> bzdiff -rwxr-xr-x 1 root root 2227 Jul 10 2019 bzdiff lrwxrwxrwx 1 root root 6 Jul 10 2019 bzegrep -> bzgrep -rwxr-xr-x 1 root root 4877 Jun 24 2019 bzexe lrwxrwxrwx 1 root root 6 Jul 10 2019 bzfgrep -> bzgrep -rwxr-xr-x 1 root root 3641 Jul 10 2019 bzgrep -rwxr-xr-x 3 root root 26052 Jul 10 2019 bzip2 -rwxr-xr-x 1 root root 9636 Jul 10 2019 bzip2recover lrwxrwxrwx 1 root root 6 Jul 10 2019 bzless -> bzmore -rwxr-xr-x 1 root root 1297 Jul 10 2019 bzmore -rwxr-xr-x 1 root root 22432 Feb 28 2019 cat -rwxr-xr-x 1 root root 38868 Feb 28 2019 chgrp -rwxr-xr-x 1 root root 38836 Feb 28 2019 chmod -rwxr-xr-x 1 root root 42972 Feb 28 2019 chown -rwxr-xr-x 1 root root 88376 Feb 28 2019 cp -rwxr-xr-x 1 root root 75516 Jan 17 2019 dash -rwxr-xr-x 1 root root 71648 Feb 28 2019 date -rwxr-xr-x 1 root root 51212 Feb 28 2019 dd -rwxr-xr-x 1 root root 55672 Feb 28 2019 df -rwxr-xr-x 1 root root 88444 Feb 28 2019 dir -rwxr-xr-x 1 root root 54872 Jan 9 2019 dmesg lrwxrwxrwx 1 root root 8 Sep 26 2018 dnsdomainname -> hostname lrwxrwxrwx 1 root root 8 Sep 26 2018 domainname -> hostname -rwxr-xr-x 1 root root 22364 Feb 28 2019 echo -rwxr-xr-x 1 root root 28 Jan 7 2019 egrep -rwxr-xr-x 1 root root 18260 Feb 28 2019 false -rwxr-xr-x 1 root root 28 Jan 7 2019 fgrep -rwxr-xr-x 1 root root 47356 Jan 9 2019 findmnt -rwsr-xr-x 1 root root 21980 Apr 22 07:38 fusermount -rwxr-xr-x 1 root root 124508 Jan 7 2019 grep -rwxr-xr-x 2 root root 2345 Jan 5 2019 gunzip -rwxr-xr-x 1 root root 6375 Jan 5 2019 gzexe -rwxr-xr-x 1 root root 64232 Jan 5 2019 gzip -rwxr-xr-x 1 root root 13784 Sep 26 2018 hostname -rwxr-xr-x 1 root root 43044 Feb 28 2019 ln -rwxr-xr-x 1 root root 34932 Jul 26 2018 login -rwxr-xr-x 1 root root 88444 Feb 28 2019 ls -rwxr-xr-x 1 root root 67036 Jan 9 2019 lsblk -rwxr-xr-x 1 root root 47168 Feb 28 2019 mkdir -rwxr-xr-x 1 root root 43040 Feb 28 2019 mknod -rwxr-xr-x 1 root root 26552 Feb 28 2019 mktemp -rwxr-xr-x 1 root root 26024 Jan 9 2019 more -rwsr-xr-x 1 root root 34268 Jan 9 2019 mount -rwxr-xr-x 1 root root 9688 Jan 9 2019 mountpoint -rwxr-xr-x 1 root root 84284 Feb 28 2019 mv lrwxrwxrwx 1 root root 8 Sep 26 2018 nisdomainname -> hostname lrwxrwxrwx 1 root root 14 Feb 14 2019 pidof -> /sbin/killall5 -rwxr-xr-x 1 root root 22416 Feb 28 2019 pwd lrwxrwxrwx 1 root root 4 Apr 17 2019 rbash -> bash -rwxr-xr-x 1 root root 26504 Feb 28 2019 readlink -rwxr-xr-x 1 root root 42968 Feb 28 2019 rm -rwxr-xr-x 1 root root 26496 Feb 28 2019 rmdir -rwxr-xr-x 1 root root 14136 Jan 21 2019 run-parts -rwxr-xr-x 1 root root 76012 Dec 22 2018 sed lrwxrwxrwx 1 root root 4 Aug 14 20:25 sh -> dash -rwxr-xr-x 1 root root 22384 Feb 28 2019 sleep -rwxr-xr-x 1 root root 51124 Feb 28 2019 stty -rwsr-xr-x 1 root root 42472 Jan 9 2019 su -rwxr-xr-x 1 root root 22392 Feb 28 2019 sync -rwxr-xr-x 1 root root 283324 Apr 23 2019 tar -rwxr-xr-x 1 root root 9808 Jan 21 2019 tempfile -rwxr-xr-x 1 root root 63464 Feb 28 2019 touch -rwxr-xr-x 1 root root 18260 Feb 28 2019 true -rwxr-xr-x 1 root root 9636 Apr 22 07:38 ulockmgr_server -rwsr-xr-x 1 root root 21976 Jan 9 2019 umount -rwxr-xr-x 1 root root 22380 Feb 28 2019 uname -rwxr-xr-x 2 root root 2345 Jan 5 2019 uncompress -rwxr-xr-x 1 root root 88444 Feb 28 2019 vdir -rwxr-xr-x 1 root root 21980 Jan 9 2019 wdctl -rwxr-xr-x 1 root root 946 Jan 21 2019 which lrwxrwxrwx 1 root root 8 Sep 26 2018 ypdomainname -> hostname -rwxr-xr-x 1 root root 1983 Jan 5 2019 zcat -rwxr-xr-x 1 root root 1677 Jan 5 2019 zcmp -rwxr-xr-x 1 root root 5879 Jan 5 2019 zdiff -rwxr-xr-x 1 root root 29 Jan 5 2019 zegrep -rwxr-xr-x 1 root root 29 Jan 5 2019 zfgrep -rwxr-xr-x 1 root root 2080 Jan 5 2019 zforce -rwxr-xr-x 1 root root 7584 Jan 5 2019 zgrep -rwxr-xr-x 1 root root 2205 Jan 5 2019 zless -rwxr-xr-x 1 root root 1841 Jan 5 2019 zmore -rwxr-xr-x 1 root root 4552 Jan 5 2019 znew I: user script /srv/workspace/pbuilder/26969/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: armhf Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper (>= 11), libdb-dev, libglib2.0-dev, pkg-config dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 18932 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper (>= 11); however: Package debhelper is not installed. pbuilder-satisfydepends-dummy depends on libdb-dev; however: Package libdb-dev is not installed. pbuilder-satisfydepends-dummy depends on libglib2.0-dev; however: Package libglib2.0-dev is not installed. pbuilder-satisfydepends-dummy depends on pkg-config; however: Package pkg-config is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdmainutils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libblkid-dev{a} libbsd0{a} libcroco3{a} libdb-dev{a} libdb5.3-dev{a} libelf1{a} libexpat1{a} libffi-dev{a} libfile-stripnondeterminism-perl{a} libglib2.0-0{a} libglib2.0-bin{a} libglib2.0-data{a} libglib2.0-dev{a} libglib2.0-dev-bin{a} libicu63{a} libmagic-mgc{a} libmagic1{a} libmount-dev{a} libmpdec2{a} libncurses6{a} libpcre16-3{a} libpcre3-dev{a} libpcre32-3{a} libpcrecpp0v5{a} libpipeline1{a} libpython3-stdlib{a} libpython3.7-minimal{a} libpython3.7-stdlib{a} libreadline7{a} libselinux1-dev{a} libsepol1-dev{a} libsigsegv2{a} libssl1.1{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} mime-support{a} pkg-config{a} po-debconf{a} python3{a} python3-distutils{a} python3-lib2to3{a} python3-minimal{a} python3.7{a} python3.7-minimal{a} readline-common{a} sensible-utils{a} uuid-dev{a} zlib1g-dev{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libgpm2 libltdl-dev libmail-sendmail-perl lynx shared-mime-info wget xdg-user-dirs 0 packages upgraded, 66 newly installed, 0 to remove and 0 not upgraded. Need to get 30.4 MB of archives. After unpacking 112 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian buster/main armhf libbsd0 armhf 0.9.1-2 [103 kB] Get: 2 http://deb.debian.org/debian buster/main armhf bsdmainutils armhf 11.1.2+b1 [186 kB] Get: 3 http://deb.debian.org/debian buster/main armhf libuchardet0 armhf 0.0.6-3 [62.2 kB] Get: 4 http://deb.debian.org/debian buster/main armhf groff-base armhf 1.22.4-3 [828 kB] Get: 5 http://deb.debian.org/debian buster/main armhf libpipeline1 armhf 1.5.1-2 [26.8 kB] Get: 6 http://deb.debian.org/debian buster/main armhf man-db armhf 2.8.5-2 [1240 kB] Get: 7 http://deb.debian.org/debian buster/main armhf libssl1.1 armhf 1.1.1d-0+deb10u3 [1299 kB] Get: 8 http://deb.debian.org/debian buster/main armhf libpython3.7-minimal armhf 3.7.3-2+deb10u2 [582 kB] Get: 9 http://deb.debian.org/debian buster/main armhf libexpat1 armhf 2.2.6-2+deb10u1 [78.0 kB] Get: 10 http://deb.debian.org/debian buster/main armhf python3.7-minimal armhf 3.7.3-2+deb10u2 [1466 kB] Get: 11 http://deb.debian.org/debian buster/main armhf python3-minimal armhf 3.7.3-1 [36.6 kB] Get: 12 http://deb.debian.org/debian buster/main armhf mime-support all 3.62 [37.2 kB] Get: 13 http://deb.debian.org/debian buster/main armhf libmpdec2 armhf 2.4.2-2 [69.3 kB] Get: 14 http://deb.debian.org/debian buster/main armhf readline-common all 7.0-5 [70.6 kB] Get: 15 http://deb.debian.org/debian buster/main armhf libreadline7 armhf 7.0-5 [131 kB] Get: 16 http://deb.debian.org/debian buster/main armhf libpython3.7-stdlib armhf 3.7.3-2+deb10u2 [1660 kB] Get: 17 http://deb.debian.org/debian buster/main armhf python3.7 armhf 3.7.3-2+deb10u2 [330 kB] Get: 18 http://deb.debian.org/debian buster/main armhf libpython3-stdlib armhf 3.7.3-1 [20.0 kB] Get: 19 http://deb.debian.org/debian buster/main armhf python3 armhf 3.7.3-1 [61.5 kB] Get: 20 http://deb.debian.org/debian buster/main armhf sensible-utils all 0.0.12 [15.8 kB] Get: 21 http://deb.debian.org/debian buster/main armhf libmagic-mgc armhf 1:5.35-4+deb10u1 [242 kB] Get: 22 http://deb.debian.org/debian buster/main armhf libmagic1 armhf 1:5.35-4+deb10u1 [110 kB] Get: 23 http://deb.debian.org/debian buster/main armhf file armhf 1:5.35-4+deb10u1 [65.5 kB] Get: 24 http://deb.debian.org/debian buster/main armhf gettext-base armhf 0.19.8.1-9 [118 kB] Get: 25 http://deb.debian.org/debian buster/main armhf libsigsegv2 armhf 2.12-2 [32.1 kB] Get: 26 http://deb.debian.org/debian buster/main armhf m4 armhf 1.4.18-2 [190 kB] Get: 27 http://deb.debian.org/debian buster/main armhf autoconf all 2.69-11 [341 kB] Get: 28 http://deb.debian.org/debian buster/main armhf autotools-dev all 20180224.1 [77.0 kB] Get: 29 http://deb.debian.org/debian buster/main armhf automake all 1:1.16.1-4 [771 kB] Get: 30 http://deb.debian.org/debian buster/main armhf autopoint all 0.19.8.1-9 [434 kB] Get: 31 http://deb.debian.org/debian buster/main armhf libtool all 2.4.6-9 [547 kB] Get: 32 http://deb.debian.org/debian buster/main armhf dh-autoreconf all 19 [16.9 kB] Get: 33 http://deb.debian.org/debian buster/main armhf libarchive-zip-perl all 1.64-1 [96.8 kB] Get: 34 http://deb.debian.org/debian buster/main armhf libfile-stripnondeterminism-perl all 1.1.2-1 [19.8 kB] Get: 35 http://deb.debian.org/debian buster/main armhf dh-strip-nondeterminism all 1.1.2-1 [13.0 kB] Get: 36 http://deb.debian.org/debian buster/main armhf libelf1 armhf 0.176-1.1 [158 kB] Get: 37 http://deb.debian.org/debian buster/main armhf dwz armhf 0.12-3 [72.0 kB] Get: 38 http://deb.debian.org/debian buster/main armhf libglib2.0-0 armhf 2.58.3-2+deb10u2 [1101 kB] Get: 39 http://deb.debian.org/debian buster/main armhf libicu63 armhf 63.1-6+deb10u1 [8005 kB] Get: 40 http://deb.debian.org/debian buster/main armhf libxml2 armhf 2.9.4+dfsg1-7+b3 [595 kB] Get: 41 http://deb.debian.org/debian buster/main armhf libcroco3 armhf 0.6.12-3 [133 kB] Get: 42 http://deb.debian.org/debian buster/main armhf libncurses6 armhf 6.1+20181013-2+deb10u2 [79.8 kB] Get: 43 http://deb.debian.org/debian buster/main armhf gettext armhf 0.19.8.1-9 [1242 kB] Get: 44 http://deb.debian.org/debian buster/main armhf intltool-debian all 0.35.0+20060710.5 [26.8 kB] Get: 45 http://deb.debian.org/debian buster/main armhf po-debconf all 1.0.21 [248 kB] Get: 46 http://deb.debian.org/debian buster/main armhf debhelper all 12.1.1 [1016 kB] Get: 47 http://deb.debian.org/debian buster/main armhf uuid-dev armhf 2.33.1-0.1 [92.6 kB] Get: 48 http://deb.debian.org/debian buster/main armhf libblkid-dev armhf 2.33.1-0.1 [217 kB] Get: 49 http://deb.debian.org/debian buster/main armhf libdb5.3-dev armhf 5.3.28+dfsg1-0.5 [694 kB] Get: 50 http://deb.debian.org/debian buster/main armhf libdb-dev armhf 5.3.1+nmu1 [2500 B] Get: 51 http://deb.debian.org/debian buster/main armhf libffi-dev armhf 3.2.1-9 [154 kB] Get: 52 http://deb.debian.org/debian buster/main armhf libglib2.0-data all 2.58.3-2+deb10u2 [1110 kB] Get: 53 http://deb.debian.org/debian buster/main armhf libglib2.0-bin armhf 2.58.3-2+deb10u2 [119 kB] Get: 54 http://deb.debian.org/debian buster/main armhf python3-lib2to3 all 3.7.3-1 [76.7 kB] Get: 55 http://deb.debian.org/debian buster/main armhf python3-distutils all 3.7.3-1 [142 kB] Get: 56 http://deb.debian.org/debian buster/main armhf libglib2.0-dev-bin armhf 2.58.3-2+deb10u2 [155 kB] Get: 57 http://deb.debian.org/debian buster/main armhf libmount-dev armhf 2.33.1-0.1 [223 kB] Get: 58 http://deb.debian.org/debian buster/main armhf libpcre16-3 armhf 2:8.39-12 [238 kB] Get: 59 http://deb.debian.org/debian buster/main armhf libpcre32-3 armhf 2:8.39-12 [231 kB] Get: 60 http://deb.debian.org/debian buster/main armhf libpcrecpp0v5 armhf 2:8.39-12 [150 kB] Get: 61 http://deb.debian.org/debian buster/main armhf libpcre3-dev armhf 2:8.39-12 [585 kB] Get: 62 http://deb.debian.org/debian buster/main armhf libsepol1-dev armhf 2.8-1 [318 kB] Get: 63 http://deb.debian.org/debian buster/main armhf libselinux1-dev armhf 2.8-1+b1 [162 kB] Get: 64 http://deb.debian.org/debian buster/main armhf pkg-config armhf 0.29-6 [60.7 kB] Get: 65 http://deb.debian.org/debian buster/main armhf zlib1g-dev armhf 1:1.2.11.dfsg-1 [207 kB] Get: 66 http://deb.debian.org/debian buster/main armhf libglib2.0-dev armhf 2.58.3-2+deb10u2 [1386 kB] Fetched 30.4 MB in 6s (5305 kB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package libbsd0:armhf. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 18932 files and directories currently installed.) Preparing to unpack .../0-libbsd0_0.9.1-2_armhf.deb ... Unpacking libbsd0:armhf (0.9.1-2) ... Selecting previously unselected package bsdmainutils. Preparing to unpack .../1-bsdmainutils_11.1.2+b1_armhf.deb ... Unpacking bsdmainutils (11.1.2+b1) ... Selecting previously unselected package libuchardet0:armhf. Preparing to unpack .../2-libuchardet0_0.0.6-3_armhf.deb ... Unpacking libuchardet0:armhf (0.0.6-3) ... Selecting previously unselected package groff-base. Preparing to unpack .../3-groff-base_1.22.4-3_armhf.deb ... Unpacking groff-base (1.22.4-3) ... Selecting previously unselected package libpipeline1:armhf. Preparing to unpack .../4-libpipeline1_1.5.1-2_armhf.deb ... Unpacking libpipeline1:armhf (1.5.1-2) ... Selecting previously unselected package man-db. Preparing to unpack .../5-man-db_2.8.5-2_armhf.deb ... Unpacking man-db (2.8.5-2) ... Selecting previously unselected package libssl1.1:armhf. Preparing to unpack .../6-libssl1.1_1.1.1d-0+deb10u3_armhf.deb ... Unpacking libssl1.1:armhf (1.1.1d-0+deb10u3) ... Selecting previously unselected package libpython3.7-minimal:armhf. Preparing to unpack .../7-libpython3.7-minimal_3.7.3-2+deb10u2_armhf.deb ... Unpacking libpython3.7-minimal:armhf (3.7.3-2+deb10u2) ... Selecting previously unselected package libexpat1:armhf. Preparing to unpack .../8-libexpat1_2.2.6-2+deb10u1_armhf.deb ... Unpacking libexpat1:armhf (2.2.6-2+deb10u1) ... Selecting previously unselected package python3.7-minimal. Preparing to unpack .../9-python3.7-minimal_3.7.3-2+deb10u2_armhf.deb ... Unpacking python3.7-minimal (3.7.3-2+deb10u2) ... Setting up libssl1.1:armhf (1.1.1d-0+deb10u3) ... Setting up libpython3.7-minimal:armhf (3.7.3-2+deb10u2) ... Setting up libexpat1:armhf (2.2.6-2+deb10u1) ... Setting up python3.7-minimal (3.7.3-2+deb10u2) ... Selecting previously unselected package python3-minimal. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19827 files and directories currently installed.) Preparing to unpack .../0-python3-minimal_3.7.3-1_armhf.deb ... Unpacking python3-minimal (3.7.3-1) ... Selecting previously unselected package mime-support. Preparing to unpack .../1-mime-support_3.62_all.deb ... Unpacking mime-support (3.62) ... Selecting previously unselected package libmpdec2:armhf. Preparing to unpack .../2-libmpdec2_2.4.2-2_armhf.deb ... Unpacking libmpdec2:armhf (2.4.2-2) ... Selecting previously unselected package readline-common. Preparing to unpack .../3-readline-common_7.0-5_all.deb ... Unpacking readline-common (7.0-5) ... Selecting previously unselected package libreadline7:armhf. Preparing to unpack .../4-libreadline7_7.0-5_armhf.deb ... Unpacking libreadline7:armhf (7.0-5) ... Selecting previously unselected package libpython3.7-stdlib:armhf. Preparing to unpack .../5-libpython3.7-stdlib_3.7.3-2+deb10u2_armhf.deb ... Unpacking libpython3.7-stdlib:armhf (3.7.3-2+deb10u2) ... Selecting previously unselected package python3.7. Preparing to unpack .../6-python3.7_3.7.3-2+deb10u2_armhf.deb ... Unpacking python3.7 (3.7.3-2+deb10u2) ... Selecting previously unselected package libpython3-stdlib:armhf. Preparing to unpack .../7-libpython3-stdlib_3.7.3-1_armhf.deb ... Unpacking libpython3-stdlib:armhf (3.7.3-1) ... Setting up python3-minimal (3.7.3-1) ... Selecting previously unselected package python3. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20288 files and directories currently installed.) Preparing to unpack .../00-python3_3.7.3-1_armhf.deb ... Unpacking python3 (3.7.3-1) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../01-sensible-utils_0.0.12_all.deb ... Unpacking sensible-utils (0.0.12) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../02-libmagic-mgc_1%3a5.35-4+deb10u1_armhf.deb ... Unpacking libmagic-mgc (1:5.35-4+deb10u1) ... Selecting previously unselected package libmagic1:armhf. Preparing to unpack .../03-libmagic1_1%3a5.35-4+deb10u1_armhf.deb ... Unpacking libmagic1:armhf (1:5.35-4+deb10u1) ... Selecting previously unselected package file. Preparing to unpack .../04-file_1%3a5.35-4+deb10u1_armhf.deb ... Unpacking file (1:5.35-4+deb10u1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../05-gettext-base_0.19.8.1-9_armhf.deb ... Unpacking gettext-base (0.19.8.1-9) ... Selecting previously unselected package libsigsegv2:armhf. Preparing to unpack .../06-libsigsegv2_2.12-2_armhf.deb ... Unpacking libsigsegv2:armhf (2.12-2) ... Selecting previously unselected package m4. Preparing to unpack .../07-m4_1.4.18-2_armhf.deb ... Unpacking m4 (1.4.18-2) ... Selecting previously unselected package autoconf. Preparing to unpack .../08-autoconf_2.69-11_all.deb ... Unpacking autoconf (2.69-11) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../09-autotools-dev_20180224.1_all.deb ... Unpacking autotools-dev (20180224.1) ... Selecting previously unselected package automake. Preparing to unpack .../10-automake_1%3a1.16.1-4_all.deb ... Unpacking automake (1:1.16.1-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../11-autopoint_0.19.8.1-9_all.deb ... Unpacking autopoint (0.19.8.1-9) ... Selecting previously unselected package libtool. Preparing to unpack .../12-libtool_2.4.6-9_all.deb ... Unpacking libtool (2.4.6-9) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../13-dh-autoreconf_19_all.deb ... Unpacking dh-autoreconf (19) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../14-libarchive-zip-perl_1.64-1_all.deb ... Unpacking libarchive-zip-perl (1.64-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../15-libfile-stripnondeterminism-perl_1.1.2-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.1.2-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../16-dh-strip-nondeterminism_1.1.2-1_all.deb ... Unpacking dh-strip-nondeterminism (1.1.2-1) ... Selecting previously unselected package libelf1:armhf. Preparing to unpack .../17-libelf1_0.176-1.1_armhf.deb ... Unpacking libelf1:armhf (0.176-1.1) ... Selecting previously unselected package dwz. Preparing to unpack .../18-dwz_0.12-3_armhf.deb ... Unpacking dwz (0.12-3) ... Selecting previously unselected package libglib2.0-0:armhf. Preparing to unpack .../19-libglib2.0-0_2.58.3-2+deb10u2_armhf.deb ... Unpacking libglib2.0-0:armhf (2.58.3-2+deb10u2) ... Selecting previously unselected package libicu63:armhf. Preparing to unpack .../20-libicu63_63.1-6+deb10u1_armhf.deb ... Unpacking libicu63:armhf (63.1-6+deb10u1) ... Selecting previously unselected package libxml2:armhf. Preparing to unpack .../21-libxml2_2.9.4+dfsg1-7+b3_armhf.deb ... Unpacking libxml2:armhf (2.9.4+dfsg1-7+b3) ... Selecting previously unselected package libcroco3:armhf. Preparing to unpack .../22-libcroco3_0.6.12-3_armhf.deb ... Unpacking libcroco3:armhf (0.6.12-3) ... Selecting previously unselected package libncurses6:armhf. Preparing to unpack .../23-libncurses6_6.1+20181013-2+deb10u2_armhf.deb ... Unpacking libncurses6:armhf (6.1+20181013-2+deb10u2) ... Selecting previously unselected package gettext. Preparing to unpack .../24-gettext_0.19.8.1-9_armhf.deb ... Unpacking gettext (0.19.8.1-9) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../25-intltool-debian_0.35.0+20060710.5_all.deb ... Unpacking intltool-debian (0.35.0+20060710.5) ... Selecting previously unselected package po-debconf. Preparing to unpack .../26-po-debconf_1.0.21_all.deb ... Unpacking po-debconf (1.0.21) ... Selecting previously unselected package debhelper. Preparing to unpack .../27-debhelper_12.1.1_all.deb ... Unpacking debhelper (12.1.1) ... Selecting previously unselected package uuid-dev:armhf. Preparing to unpack .../28-uuid-dev_2.33.1-0.1_armhf.deb ... Unpacking uuid-dev:armhf (2.33.1-0.1) ... Selecting previously unselected package libblkid-dev:armhf. Preparing to unpack .../29-libblkid-dev_2.33.1-0.1_armhf.deb ... Unpacking libblkid-dev:armhf (2.33.1-0.1) ... Selecting previously unselected package libdb5.3-dev. Preparing to unpack .../30-libdb5.3-dev_5.3.28+dfsg1-0.5_armhf.deb ... Unpacking libdb5.3-dev (5.3.28+dfsg1-0.5) ... Selecting previously unselected package libdb-dev:armhf. Preparing to unpack .../31-libdb-dev_5.3.1+nmu1_armhf.deb ... Unpacking libdb-dev:armhf (5.3.1+nmu1) ... Selecting previously unselected package libffi-dev:armhf. Preparing to unpack .../32-libffi-dev_3.2.1-9_armhf.deb ... Unpacking libffi-dev:armhf (3.2.1-9) ... Selecting previously unselected package libglib2.0-data. Preparing to unpack .../33-libglib2.0-data_2.58.3-2+deb10u2_all.deb ... Unpacking libglib2.0-data (2.58.3-2+deb10u2) ... Selecting previously unselected package libglib2.0-bin. Preparing to unpack .../34-libglib2.0-bin_2.58.3-2+deb10u2_armhf.deb ... Unpacking libglib2.0-bin (2.58.3-2+deb10u2) ... Selecting previously unselected package python3-lib2to3. Preparing to unpack .../35-python3-lib2to3_3.7.3-1_all.deb ... Unpacking python3-lib2to3 (3.7.3-1) ... Selecting previously unselected package python3-distutils. Preparing to unpack .../36-python3-distutils_3.7.3-1_all.deb ... Unpacking python3-distutils (3.7.3-1) ... Selecting previously unselected package libglib2.0-dev-bin. Preparing to unpack .../37-libglib2.0-dev-bin_2.58.3-2+deb10u2_armhf.deb ... Unpacking libglib2.0-dev-bin (2.58.3-2+deb10u2) ... Selecting previously unselected package libmount-dev:armhf. Preparing to unpack .../38-libmount-dev_2.33.1-0.1_armhf.deb ... Unpacking libmount-dev:armhf (2.33.1-0.1) ... Selecting previously unselected package libpcre16-3:armhf. Preparing to unpack .../39-libpcre16-3_2%3a8.39-12_armhf.deb ... Unpacking libpcre16-3:armhf (2:8.39-12) ... Selecting previously unselected package libpcre32-3:armhf. Preparing to unpack .../40-libpcre32-3_2%3a8.39-12_armhf.deb ... Unpacking libpcre32-3:armhf (2:8.39-12) ... Selecting previously unselected package libpcrecpp0v5:armhf. Preparing to unpack .../41-libpcrecpp0v5_2%3a8.39-12_armhf.deb ... Unpacking libpcrecpp0v5:armhf (2:8.39-12) ... Selecting previously unselected package libpcre3-dev:armhf. Preparing to unpack .../42-libpcre3-dev_2%3a8.39-12_armhf.deb ... Unpacking libpcre3-dev:armhf (2:8.39-12) ... Selecting previously unselected package libsepol1-dev:armhf. Preparing to unpack .../43-libsepol1-dev_2.8-1_armhf.deb ... Unpacking libsepol1-dev:armhf (2.8-1) ... Selecting previously unselected package libselinux1-dev:armhf. Preparing to unpack .../44-libselinux1-dev_2.8-1+b1_armhf.deb ... Unpacking libselinux1-dev:armhf (2.8-1+b1) ... Selecting previously unselected package pkg-config. Preparing to unpack .../45-pkg-config_0.29-6_armhf.deb ... Unpacking pkg-config (0.29-6) ... Selecting previously unselected package zlib1g-dev:armhf. Preparing to unpack .../46-zlib1g-dev_1%3a1.2.11.dfsg-1_armhf.deb ... Unpacking zlib1g-dev:armhf (1:1.2.11.dfsg-1) ... Selecting previously unselected package libglib2.0-dev:armhf. Preparing to unpack .../47-libglib2.0-dev_2.58.3-2+deb10u2_armhf.deb ... Unpacking libglib2.0-dev:armhf (2.58.3-2+deb10u2) ... Setting up libpcrecpp0v5:armhf (2:8.39-12) ... Setting up libpipeline1:armhf (1.5.1-2) ... Setting up mime-support (3.62) ... Setting up libpcre16-3:armhf (2:8.39-12) ... Setting up libmagic-mgc (1:5.35-4+deb10u1) ... Setting up libarchive-zip-perl (1.64-1) ... Setting up libglib2.0-0:armhf (2.58.3-2+deb10u2) ... No schema files found: doing nothing. Setting up libmagic1:armhf (1:5.35-4+deb10u1) ... Setting up libsepol1-dev:armhf (2.8-1) ... Setting up gettext-base (0.19.8.1-9) ... Setting up file (1:5.35-4+deb10u1) ... Setting up libffi-dev:armhf (3.2.1-9) ... Setting up libicu63:armhf (63.1-6+deb10u1) ... Setting up autotools-dev (20180224.1) ... Setting up libglib2.0-data (2.58.3-2+deb10u2) ... Setting up uuid-dev:armhf (2.33.1-0.1) ... Setting up libncurses6:armhf (6.1+20181013-2+deb10u2) ... Setting up libsigsegv2:armhf (2.12-2) ... Setting up libpcre32-3:armhf (2:8.39-12) ... Setting up autopoint (0.19.8.1-9) ... Setting up pkg-config (0.29-6) ... Setting up zlib1g-dev:armhf (1:1.2.11.dfsg-1) ... Setting up sensible-utils (0.0.12) ... Setting up libdb5.3-dev (5.3.28+dfsg1-0.5) ... Setting up libuchardet0:armhf (0.0.6-3) ... Setting up libmpdec2:armhf (2.4.2-2) ... Setting up libbsd0:armhf (0.9.1-2) ... Setting up libelf1:armhf (0.176-1.1) ... Setting up readline-common (7.0-5) ... Setting up libxml2:armhf (2.9.4+dfsg1-7+b3) ... Setting up libreadline7:armhf (7.0-5) ... Setting up libfile-stripnondeterminism-perl (1.1.2-1) ... Setting up libblkid-dev:armhf (2.33.1-0.1) ... Setting up libpython3.7-stdlib:armhf (3.7.3-2+deb10u2) ... Setting up libtool (2.4.6-9) ... Setting up libpcre3-dev:armhf (2:8.39-12) ... Setting up libglib2.0-bin (2.58.3-2+deb10u2) ... Setting up m4 (1.4.18-2) ... Setting up libdb-dev:armhf (5.3.1+nmu1) ... Setting up bsdmainutils (11.1.2+b1) ... update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode Setting up libcroco3:armhf (0.6.12-3) ... Setting up autoconf (2.69-11) ... Setting up dwz (0.12-3) ... Setting up groff-base (1.22.4-3) ... Setting up libmount-dev:armhf (2.33.1-0.1) ... Setting up libpython3-stdlib:armhf (3.7.3-1) ... Setting up automake (1:1.16.1-4) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up python3.7 (3.7.3-2+deb10u2) ... Setting up gettext (0.19.8.1-9) ... Setting up libselinux1-dev:armhf (2.8-1+b1) ... Setting up python3 (3.7.3-1) ... Setting up man-db (2.8.5-2) ... Not building database; man-db/auto-update is not 'true'. Setting up intltool-debian (0.35.0+20060710.5) ... Setting up python3-lib2to3 (3.7.3-1) ... Setting up python3-distutils (3.7.3-1) ... Setting up libglib2.0-dev-bin (2.58.3-2+deb10u2) ... Setting up po-debconf (1.0.21) ... Setting up libglib2.0-dev:armhf (2.58.3-2+deb10u2) ... Setting up dh-autoreconf (19) ... Setting up debhelper (12.1.1) ... Setting up dh-strip-nondeterminism (1.1.2-1) ... Processing triggers for libc-bin (2.28-10) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.23-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/skktools-1.3.4/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b dpkg-buildpackage: info: source package skktools dpkg-buildpackage: info: source version 1.3.4-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Tatsuya Kinoshita dpkg-source --before-build . dpkg-buildpackage: info: host architecture armhf fakeroot debian/rules clean dh_testdir dh_testroot rm -f build*-stamp [ ! -f Makefile ] || /usr/bin/make distclean rm -f libtool stamp-* dh_clean debian/rules build dh_testdir dh_update_autotools_config CFLAGS="-g -O2 -ffile-prefix-map=/build/skktools-1.3.4=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2" LDFLAGS="-Wl,-z,relro -Wl,-z,now" ./configure --prefix=/usr checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking for style of include used by make... GNU checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking dependency style of gcc... gcc3 checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking minix/config.h usability... no checking minix/config.h presence... no checking for minix/config.h... no checking whether it is safe to define __EXTENSIONS__... yes checking for gawk... (cached) mawk checking for gcc... (cached) gcc checking whether we are using the GNU C compiler... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to accept ISO C89... (cached) none needed checking dependency style of gcc... (cached) gcc3 checking build system type... aarch64-unknown-linux-gnu checking host system type... aarch64-unknown-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking whether the shell understands some XSI constructs... yes checking whether the shell understands "+="... yes checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for ar... ar checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking whether make sets $(MAKE)... (cached) yes checking for bzip2... /bin/bzip2 checking for date... /bin/date checking for gzip... /bin/gzip checking for md5... no checking for md5sum... /usr/bin/md5sum checking for tar... /bin/tar checking for mkdtemp... yes checking for snprintf... yes checking for dbm_open... no checking for dbm_open in -lndbm... no checking for __db_ndbm_open in -ldb... yes checking for pkg-config... /usr/bin/pkg-config checking for glib-2.0 >= 2.0.0... yes checking GLIB2_CFLAGS... -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include checking GLIB2_LIBS... -lglib-2.0 checking fcntl.h usability... yes checking fcntl.h presence... yes checking for fcntl.h... yes checking glib.h usability... no checking glib.h presence... no checking for glib.h... no checking malloc.h usability... yes checking malloc.h presence... yes checking for malloc.h... yes checking for an ANSI C-conforming const... yes checking for stdlib.h... (cached) yes checking for GNU libc compatible malloc... yes checking return type of signal handlers... void configure: creating ./config.status config.status: creating Makefile config.status: creating config.h config.status: executing depfiles commands config.status: executing libtool commands /usr/bin/make make[1]: Entering directory '/build/skktools-1.3.4' gcc -I. -I. -I. -g -O2 -ffile-prefix-map=/build/skktools-1.3.4=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -o skkdic-expr ./skkdic-expr.c -ldb -Wl,-z,relro -Wl,-z,now ./skkdic-expr.c: In function 'db_remove_files': ./skkdic-expr.c:140:45: warning: '.pag' directive output may be truncated writing 4 bytes into a region of size between 1 and 256 [-Wformat-truncation=] snprintf(pag_name, sizeof(pag_name), "%s.pag", file_name); ^~~~ In file included from /usr/include/stdio.h:873, from ./skkdic-expr.c:31: /usr/include/arm-linux-gnueabihf/bits/stdio2.h:67:10: note: '__builtin___snprintf_chk' output between 5 and 260 bytes into a destination of size 256 return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ __bos (__s), __fmt, __va_arg_pack ()); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./skkdic-expr.c:142:45: warning: '.dir' directive output may be truncated writing 4 bytes into a region of size between 1 and 256 [-Wformat-truncation=] snprintf(dir_name, sizeof(dir_name), "%s.dir", file_name); ^~~~ In file included from /usr/include/stdio.h:873, from ./skkdic-expr.c:31: /usr/include/arm-linux-gnueabihf/bits/stdio2.h:67:10: note: '__builtin___snprintf_chk' output between 5 and 260 bytes into a destination of size 256 return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ __bos (__s), __fmt, __va_arg_pack ()); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./skkdic-expr.c:144:45: warning: '.db' directive output may be truncated writing 3 bytes into a region of size between 1 and 256 [-Wformat-truncation=] snprintf(dir_name, sizeof(dir_name), "%s.db", file_name); ^~~ In file included from /usr/include/stdio.h:873, from ./skkdic-expr.c:31: /usr/include/arm-linux-gnueabihf/bits/stdio2.h:67:10: note: '__builtin___snprintf_chk' output between 4 and 259 bytes into a destination of size 256 return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ __bos (__s), __fmt, __va_arg_pack ()); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./skkdic-expr.c:149:42: warning: '.pag' directive output may be truncated writing 4 bytes into a region of size between 1 and 256 [-Wformat-truncation=] snprintf(pag_name, sizeof(pag_name), "%s.pag", okuri_head_name); ^~~~ In file included from /usr/include/stdio.h:873, from ./skkdic-expr.c:31: /usr/include/arm-linux-gnueabihf/bits/stdio2.h:67:10: note: '__builtin___snprintf_chk' output between 5 and 260 bytes into a destination of size 256 return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ __bos (__s), __fmt, __va_arg_pack ()); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./skkdic-expr.c:151:42: warning: '.dir' directive output may be truncated writing 4 bytes into a region of size between 1 and 256 [-Wformat-truncation=] snprintf(dir_name, sizeof(dir_name), "%s.dir", okuri_head_name); ^~~~ In file included from /usr/include/stdio.h:873, from ./skkdic-expr.c:31: /usr/include/arm-linux-gnueabihf/bits/stdio2.h:67:10: note: '__builtin___snprintf_chk' output between 5 and 260 bytes into a destination of size 256 return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ __bos (__s), __fmt, __va_arg_pack ()); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./skkdic-expr.c:153:42: warning: '.db' directive output may be truncated writing 3 bytes into a region of size between 1 and 256 [-Wformat-truncation=] snprintf(dir_name, sizeof(dir_name), "%s.db", okuri_head_name); ^~~ In file included from /usr/include/stdio.h:873, from ./skkdic-expr.c:31: /usr/include/arm-linux-gnueabihf/bits/stdio2.h:67:10: note: '__builtin___snprintf_chk' output between 4 and 259 bytes into a destination of size 256 return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ __bos (__s), __fmt, __va_arg_pack ()); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./skkdic-expr.c:157:42: warning: '.pag' directive output may be truncated writing 4 bytes into a region of size between 1 and 256 [-Wformat-truncation=] snprintf(pag_name, sizeof(pag_name), "%s.pag", okuri_tail_name); ^~~~ In file included from /usr/include/stdio.h:873, from ./skkdic-expr.c:31: /usr/include/arm-linux-gnueabihf/bits/stdio2.h:67:10: note: '__builtin___snprintf_chk' output between 5 and 260 bytes into a destination of size 256 return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ __bos (__s), __fmt, __va_arg_pack ()); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./skkdic-expr.c:159:42: warning: '.dir' directive output may be truncated writing 4 bytes into a region of size between 1 and 256 [-Wformat-truncation=] snprintf(dir_name, sizeof(dir_name), "%s.dir", okuri_tail_name); ^~~~ In file included from /usr/include/stdio.h:873, from ./skkdic-expr.c:31: /usr/include/arm-linux-gnueabihf/bits/stdio2.h:67:10: note: '__builtin___snprintf_chk' output between 5 and 260 bytes into a destination of size 256 return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ __bos (__s), __fmt, __va_arg_pack ()); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./skkdic-expr.c:161:42: warning: '.db' directive output may be truncated writing 3 bytes into a region of size between 1 and 256 [-Wformat-truncation=] snprintf(dir_name, sizeof(dir_name), "%s.db", okuri_tail_name); ^~~ In file included from /usr/include/stdio.h:873, from ./skkdic-expr.c:31: /usr/include/arm-linux-gnueabihf/bits/stdio2.h:67:10: note: '__builtin___snprintf_chk' output between 4 and 259 bytes into a destination of size 256 return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ __bos (__s), __fmt, __va_arg_pack ()); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./skkdic-expr.c: In function 'main': ./skkdic-expr.c:845:47: warning: '/skkdic' directive output may be truncated writing 7 bytes into a region of size between 1 and 256 [-Wformat-truncation=] snprintf(file_name, sizeof(file_name), "%s/skkdic%d", tmpdir, getpid()); ^~~~~~~ In file included from /usr/include/stdio.h:873, from ./skkdic-expr.c:31: /usr/include/arm-linux-gnueabihf/bits/stdio2.h:67:10: note: '__builtin___snprintf_chk' output between 9 and 274 bytes into a destination of size 256 return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ __bos (__s), __fmt, __va_arg_pack ()); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./skkdic-expr.c:847:56: warning: '/skkhead' directive output may be truncated writing 8 bytes into a region of size between 1 and 256 [-Wformat-truncation=] snprintf(okuri_head_name, sizeof(okuri_head_name), "%s/skkhead%d", tmpdir, getpid()); ^~~~~~~~ In file included from /usr/include/stdio.h:873, from ./skkdic-expr.c:31: /usr/include/arm-linux-gnueabihf/bits/stdio2.h:67:10: note: '__builtin___snprintf_chk' output between 10 and 275 bytes into a destination of size 256 return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ __bos (__s), __fmt, __va_arg_pack ()); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./skkdic-expr.c:848:56: warning: '/skktail' directive output may be truncated writing 8 bytes into a region of size between 1 and 256 [-Wformat-truncation=] snprintf(okuri_tail_name, sizeof(okuri_tail_name), "%s/skktail%d", tmpdir, getpid()); ^~~~~~~~ In file included from /usr/include/stdio.h:873, from ./skkdic-expr.c:31: /usr/include/arm-linux-gnueabihf/bits/stdio2.h:67:10: note: '__builtin___snprintf_chk' output between 10 and 275 bytes into a destination of size 256 return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ __bos (__s), __fmt, __va_arg_pack ()); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ gcc -I. -I. -I. -g -O2 -ffile-prefix-map=/build/skktools-1.3.4=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -o skkdic-sort ./skkdic-sort.c -Wl,-z,relro -Wl,-z,now gcc -I. -I. -I. -g -O2 -ffile-prefix-map=/build/skktools-1.3.4=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -o skkdic-count ./skkdic-count.c -Wl,-z,relro -Wl,-z,now gcc -I. -I. -I. -g -O2 -ffile-prefix-map=/build/skktools-1.3.4=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -o skkdic-expr2 ./skkdic-expr2.c -lglib-2.0 -Wl,-z,relro -Wl,-z,now make[1]: Leaving directory '/build/skktools-1.3.4' touch build-arch-stamp fakeroot debian/rules binary dh_testdir dh_testroot dh_prep dh_installdirs /usr/bin/make install prefix=/build/skktools-1.3.4/debian/skktools/usr make[1]: Entering directory '/build/skktools-1.3.4' ./mkinstalldirs /build/skktools-1.3.4/debian/skktools/usr/bin mkdir /build/skktools-1.3.4/debian/skktools/usr/bin /usr/bin/install -c skkdic-expr /build/skktools-1.3.4/debian/skktools/usr/bin/ /usr/bin/install -c skkdic-sort /build/skktools-1.3.4/debian/skktools/usr/bin/ /usr/bin/install -c skkdic-count /build/skktools-1.3.4/debian/skktools/usr/bin/ /usr/bin/install -c skkdic-expr2 /build/skktools-1.3.4/debian/skktools/usr/bin/ make[1]: Leaving directory '/build/skktools-1.3.4' dh_install debian/update-skkdic usr/sbin dh_install debian/skk2cdb usr/bin dh_install *.el usr/share/emacs/site-lisp for f in *.awk *.rb *.scm *.py \ convert2skk/*.pl \ convert2skk/*.rb \ convert2skk/*.sh \ convert2skk/*.awk \ convert2skk/*.sed \ convert2skk/adddummy \ convert2skk/list2skk \ convert2skk/pubdic2list \ convert2skk/removedummy \ convert2skk/skk2list \ dbm/makedbmdic* filters/*.rb; do \ touch "debian/skktools/usr/share/skktools/${f}"; \ head -1 "${f}" | grep '^#!' >/dev/null || \ case "${f}" in \ *.awk) \ echo '#!/usr/bin/gawk -f' >>"debian/skktools/usr/share/skktools/${f}" ;; \ *.sed) \ echo '#!/bin/sed -f' >>"debian/skktools/usr/share/skktools/${f}" ;; \ esac; \ LC_ALL=C perl -pe 's!/usr/local!/usr!g;s!bin/jperl[0-9]?!bin/perl!g;s!"qkc"!"nkf -e" #"qkc"!g' "${f}" >>"debian/skktools/usr/share/skktools/${f}"; \ chmod 755 "debian/skktools/usr/share/skktools/${f}"; \ done cat filters/README* >debian/skktools/usr/share/doc/skktools/README.filters cat convert2skk/README* >debian/skktools/usr/share/doc/skktools/README.convert2skk cat */read.me >debian/skktools/usr/share/doc/skktools/README.jperl dh_testdir dh_testroot dh_installchangelogs ChangeLog dh_installdocs dh_installman dh_link dh_strip dh_compress dh_fixperms dh_installdeb dh_shlibdeps dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'skktools-dbgsym' in '../skktools-dbgsym_1.3.4-1_armhf.deb'. dpkg-deb: building package 'skktools' in '../skktools_1.3.4-1_armhf.deb'. dpkg-genbuildinfo --build=binary dpkg-genchanges --build=binary >../skktools_1.3.4-1_armhf.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/26969 and its subdirectories I: Current time: Sat Aug 15 00:29:58 -12 2020 I: pbuilder-time-stamp: 1597494598 Sat Aug 15 12:30:04 UTC 2020 I: 1st build successful. Starting 2nd build on remote node jtk1a-armhf-rb.debian.net. Sat Aug 15 12:30:04 UTC 2020 I: Preparing to do remote build '2' on jtk1a-armhf-rb.debian.net. Sat Aug 15 12:34:53 UTC 2020 I: Deleting $TMPDIR on jtk1a-armhf-rb.debian.net. Sat Aug 15 12:34:55 UTC 2020 I: skktools_1.3.4-1_armhf.changes: Format: 1.8 Date: Thu, 09 Aug 2018 23:23:18 +0900 Source: skktools Binary: skktools skktools-dbgsym Architecture: armhf Version: 1.3.4-1 Distribution: unstable Urgency: medium Maintainer: Tatsuya Kinoshita Changed-By: Tatsuya Kinoshita Description: skktools - SKK dictionary maintenance tools Changes: skktools (1.3.4-1) unstable; urgency=medium . * New upstream version 1.3.4 * Update debhelper compat version to 11 * Update Standards-Version to 4.1.5 Checksums-Sha1: 0ac3bb37c5b0b98894797171ebdaef682b18c655 54772 skktools-dbgsym_1.3.4-1_armhf.deb cc8b6041de6664fc4f07399776750e5c0761d6f1 5584 skktools_1.3.4-1_armhf.buildinfo 195fb4a241d89f667ada08e5bfc3583f372c8d10 69740 skktools_1.3.4-1_armhf.deb Checksums-Sha256: 7954aa95a6e5e556f534c1174bc0adc09244fad5f254c3d4157f4019bccd470c 54772 skktools-dbgsym_1.3.4-1_armhf.deb 4b7682b16ca45bd759502353c25716f4bc5061b5edc7e7187e3ce8d38f7eaa56 5584 skktools_1.3.4-1_armhf.buildinfo ffacfceb0b7745ec3bcd7229e52e1b75de64ea45b5f28512eb4ff2ec834e5e65 69740 skktools_1.3.4-1_armhf.deb Files: bdb5773315716aa9180ba7062ffc9eab 54772 debug optional skktools-dbgsym_1.3.4-1_armhf.deb da23d1cfae342549d2985095e29a0272 5584 utils optional skktools_1.3.4-1_armhf.buildinfo e269e75f6060a8e9752460a16ea1fe8e 69740 utils optional skktools_1.3.4-1_armhf.deb Sat Aug 15 12:34:56 UTC 2020 I: diffoscope 156 will be used to compare the two builds: # Profiling output for: /usr/bin/diffoscope --html /srv/reproducible-results/rbuild-debian/tmp.WOe1Ocde0S/skktools_1.3.4-1.diffoscope.html --text /srv/reproducible-results/rbuild-debian/tmp.WOe1Ocde0S/skktools_1.3.4-1.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/tmp.WOe1Ocde0S/skktools_1.3.4-1.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/tmp.WOe1Ocde0S/b1/skktools_1.3.4-1_armhf.changes /srv/reproducible-results/rbuild-debian/tmp.WOe1Ocde0S/b2/skktools_1.3.4-1_armhf.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.221s) 0.221s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.022s) 0.022s 10 calls diffoscope.comparators.binary.FilesystemFile 0.000s 8 calls abc.DotChangesFile Sat Aug 15 12:34:58 UTC 2020 I: diffoscope 156 found no differences in the changes files, and a .buildinfo file also exists. Sat Aug 15 12:34:58 UTC 2020 I: skktools from buster built successfully and reproducibly on armhf. Sat Aug 15 12:34:59 UTC 2020 I: Submitting .buildinfo files to external archives: Sat Aug 15 12:34:59 UTC 2020 I: Submitting 8.0K b1/skktools_1.3.4-1_armhf.buildinfo.asc Sat Aug 15 12:35:00 UTC 2020 I: Submitting 8.0K b2/skktools_1.3.4-1_armhf.buildinfo.asc Sat Aug 15 12:35:01 UTC 2020 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Sat Aug 15 12:35:01 UTC 2020 I: Done submitting .buildinfo files. Sat Aug 15 12:35:01 UTC 2020 I: Removing signed skktools_1.3.4-1_armhf.buildinfo.asc files: removed './b1/skktools_1.3.4-1_armhf.buildinfo.asc' removed './b2/skktools_1.3.4-1_armhf.buildinfo.asc'