Sun Aug 9 07:22:37 UTC 2020 I: starting to build pms/buster/armhf on jenkins on '2020-08-09 07:22' Sun Aug 9 07:22:37 UTC 2020 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/armhf_7/5954/console.log Sun Aug 9 07:22:37 UTC 2020 I: Downloading source for buster/pms=0.42-1 --2020-08-09 07:22:37-- http://deb.debian.org/debian/pool/main/p/pms/pms_0.42-1.dsc Connecting to 78.137.99.97:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 1147 (1.1K) Saving to: ‘pms_0.42-1.dsc’ 0K . 100% 124M=0s 2020-08-09 07:22:37 (124 MB/s) - ‘pms_0.42-1.dsc’ saved [1147/1147] Sun Aug 9 07:22:37 UTC 2020 I: pms_0.42-1.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Format: 3.0 (quilt) Source: pms Binary: pms Architecture: any Version: 0.42-1 Maintainer: Alejandro Garrido Mota Homepage: http://pms.sourceforge.net Standards-Version: 3.9.4 Build-Depends: debhelper (>= 9), gettext, gettext-base, libgettextpo0, libncurses5-dev, libmpd-dev, libncursesw5-dev, libglib2.0-dev, gnulib, libboost-regex-dev Package-List: pms deb sound extra Checksums-Sha1: 344a1d211d752e32d32f42a3ad0ea513fcc42f81 196053 pms_0.42.orig.tar.bz2 5f2d1a33b8efb49fb595fc06338fcd75c1a8e4b9 3322 pms_0.42-1.debian.tar.gz Checksums-Sha256: 96bf942b08cba10ee891a63eeccad307fd082ef3bd20be879f189e1959e775a6 196053 pms_0.42.orig.tar.bz2 1f9aa0862e91d01f2cbff8fdd6d47a71b1d7dcac42abe9788190e67d10873324 3322 pms_0.42-1.debian.tar.gz Files: 8ebd65c5e6e33cd0ca79817a5e823805 196053 pms_0.42.orig.tar.bz2 7556307e7b0dbe1fc7793f84a170f2ca 3322 pms_0.42-1.debian.tar.gz -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.14 (GNU/Linux) iEYEARECAAYFAlIH+oMACgkQ9rCWRbJL8gDWvACguNExjxZCaJqOvwRbd3w7Pbqj BwMAoIzIodskXrO/sgKWpVIuvhFF9FGc =RKpz -----END PGP SIGNATURE----- Sun Aug 9 07:22:38 UTC 2020 I: Checking whether the package is not for us Sun Aug 9 07:22:38 UTC 2020 I: Starting 1st build on remote node ff4a-armhf-rb.debian.net. Sun Aug 9 07:22:38 UTC 2020 I: Preparing to do remote build '1' on ff4a-armhf-rb.debian.net. Sun Aug 9 07:26:05 UTC 2020 I: Deleting $TMPDIR on ff4a-armhf-rb.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Sat Aug 8 19:22:44 -12 2020 I: pbuilder-time-stamp: 1596957764 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/buster-reproducible-base.tgz] I: copying local configuration I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [pms_0.42-1.dsc] I: copying [./pms_0.42.orig.tar.bz2] I: copying [./pms_0.42-1.debian.tar.gz] I: Extracting source gpgv: unknown type of key resource 'trustedkeys.kbx' gpgv: keyblock resource '/root/.gnupg/trustedkeys.kbx': General error gpgv: Signature made Sun Aug 11 08:56:35 2013 -12 gpgv: using DSA key F6B09645B24BF200 gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./pms_0.42-1.dsc dpkg-source: info: extracting pms in pms-0.42 dpkg-source: info: unpacking pms_0.42.orig.tar.bz2 dpkg-source: info: unpacking pms_0.42-1.debian.tar.gz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying translations_errors.diff I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/30406/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='armhf' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=3' DISTRIBUTION='' HOME='/root' HOST_ARCH='armhf' IFS=' ' INVOCATION_ID='c9dc4726371e489cbb1f4fdd778655c1' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='30406' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/tmp.m0gHHUfHAS/pbuilderrc_bPh3 --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/buster-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/tmp.m0gHHUfHAS/b1 --logfile b1/build.log pms_0.42-1.dsc' SUDO_GID='111' SUDO_UID='107' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://10.0.0.15:8000/' I: uname -a Linux ff4a 4.19.0-10-armmp-lpae #1 SMP Debian 4.19.132-1 (2020-07-24) armv7l GNU/Linux I: ls -l /bin total 3328 -rwxr-xr-x 1 root root 767656 Apr 17 2019 bash -rwxr-xr-x 3 root root 26052 Jul 10 2019 bunzip2 -rwxr-xr-x 3 root root 26052 Jul 10 2019 bzcat lrwxrwxrwx 1 root root 6 Jul 10 2019 bzcmp -> bzdiff -rwxr-xr-x 1 root root 2227 Jul 10 2019 bzdiff lrwxrwxrwx 1 root root 6 Jul 10 2019 bzegrep -> bzgrep -rwxr-xr-x 1 root root 4877 Jun 24 2019 bzexe lrwxrwxrwx 1 root root 6 Jul 10 2019 bzfgrep -> bzgrep -rwxr-xr-x 1 root root 3641 Jul 10 2019 bzgrep -rwxr-xr-x 3 root root 26052 Jul 10 2019 bzip2 -rwxr-xr-x 1 root root 9636 Jul 10 2019 bzip2recover lrwxrwxrwx 1 root root 6 Jul 10 2019 bzless -> bzmore -rwxr-xr-x 1 root root 1297 Jul 10 2019 bzmore -rwxr-xr-x 1 root root 22432 Feb 28 2019 cat -rwxr-xr-x 1 root root 38868 Feb 28 2019 chgrp -rwxr-xr-x 1 root root 38836 Feb 28 2019 chmod -rwxr-xr-x 1 root root 42972 Feb 28 2019 chown -rwxr-xr-x 1 root root 88376 Feb 28 2019 cp -rwxr-xr-x 1 root root 75516 Jan 17 2019 dash -rwxr-xr-x 1 root root 71648 Feb 28 2019 date -rwxr-xr-x 1 root root 51212 Feb 28 2019 dd -rwxr-xr-x 1 root root 55672 Feb 28 2019 df -rwxr-xr-x 1 root root 88444 Feb 28 2019 dir -rwxr-xr-x 1 root root 54872 Jan 9 2019 dmesg lrwxrwxrwx 1 root root 8 Sep 26 2018 dnsdomainname -> hostname lrwxrwxrwx 1 root root 8 Sep 26 2018 domainname -> hostname -rwxr-xr-x 1 root root 22364 Feb 28 2019 echo -rwxr-xr-x 1 root root 28 Jan 7 2019 egrep -rwxr-xr-x 1 root root 18260 Feb 28 2019 false -rwxr-xr-x 1 root root 28 Jan 7 2019 fgrep -rwxr-xr-x 1 root root 47356 Jan 9 2019 findmnt -rwsr-xr-x 1 root root 21980 Apr 22 07:38 fusermount -rwxr-xr-x 1 root root 124508 Jan 7 2019 grep -rwxr-xr-x 2 root root 2345 Jan 5 2019 gunzip -rwxr-xr-x 1 root root 6375 Jan 5 2019 gzexe -rwxr-xr-x 1 root root 64232 Jan 5 2019 gzip -rwxr-xr-x 1 root root 13784 Sep 26 2018 hostname -rwxr-xr-x 1 root root 43044 Feb 28 2019 ln -rwxr-xr-x 1 root root 34932 Jul 26 2018 login -rwxr-xr-x 1 root root 88444 Feb 28 2019 ls -rwxr-xr-x 1 root root 67036 Jan 9 2019 lsblk -rwxr-xr-x 1 root root 47168 Feb 28 2019 mkdir -rwxr-xr-x 1 root root 43040 Feb 28 2019 mknod -rwxr-xr-x 1 root root 26552 Feb 28 2019 mktemp -rwxr-xr-x 1 root root 26024 Jan 9 2019 more -rwsr-xr-x 1 root root 34268 Jan 9 2019 mount -rwxr-xr-x 1 root root 9688 Jan 9 2019 mountpoint -rwxr-xr-x 1 root root 84284 Feb 28 2019 mv lrwxrwxrwx 1 root root 8 Sep 26 2018 nisdomainname -> hostname lrwxrwxrwx 1 root root 14 Feb 14 2019 pidof -> /sbin/killall5 -rwxr-xr-x 1 root root 22416 Feb 28 2019 pwd lrwxrwxrwx 1 root root 4 Apr 17 2019 rbash -> bash -rwxr-xr-x 1 root root 26504 Feb 28 2019 readlink -rwxr-xr-x 1 root root 42968 Feb 28 2019 rm -rwxr-xr-x 1 root root 26496 Feb 28 2019 rmdir -rwxr-xr-x 1 root root 14136 Jan 21 2019 run-parts -rwxr-xr-x 1 root root 76012 Dec 22 2018 sed lrwxrwxrwx 1 root root 4 Aug 6 20:27 sh -> dash -rwxr-xr-x 1 root root 22384 Feb 28 2019 sleep -rwxr-xr-x 1 root root 51124 Feb 28 2019 stty -rwsr-xr-x 1 root root 42472 Jan 9 2019 su -rwxr-xr-x 1 root root 22392 Feb 28 2019 sync -rwxr-xr-x 1 root root 283324 Apr 23 2019 tar -rwxr-xr-x 1 root root 9808 Jan 21 2019 tempfile -rwxr-xr-x 1 root root 63464 Feb 28 2019 touch -rwxr-xr-x 1 root root 18260 Feb 28 2019 true -rwxr-xr-x 1 root root 9636 Apr 22 07:38 ulockmgr_server -rwsr-xr-x 1 root root 21976 Jan 9 2019 umount -rwxr-xr-x 1 root root 22380 Feb 28 2019 uname -rwxr-xr-x 2 root root 2345 Jan 5 2019 uncompress -rwxr-xr-x 1 root root 88444 Feb 28 2019 vdir -rwxr-xr-x 1 root root 21980 Jan 9 2019 wdctl -rwxr-xr-x 1 root root 946 Jan 21 2019 which lrwxrwxrwx 1 root root 8 Sep 26 2018 ypdomainname -> hostname -rwxr-xr-x 1 root root 1983 Jan 5 2019 zcat -rwxr-xr-x 1 root root 1677 Jan 5 2019 zcmp -rwxr-xr-x 1 root root 5879 Jan 5 2019 zdiff -rwxr-xr-x 1 root root 29 Jan 5 2019 zegrep -rwxr-xr-x 1 root root 29 Jan 5 2019 zfgrep -rwxr-xr-x 1 root root 2080 Jan 5 2019 zforce -rwxr-xr-x 1 root root 7584 Jan 5 2019 zgrep -rwxr-xr-x 1 root root 2205 Jan 5 2019 zless -rwxr-xr-x 1 root root 1841 Jan 5 2019 zmore -rwxr-xr-x 1 root root 4552 Jan 5 2019 znew I: user script /srv/workspace/pbuilder/30406/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: armhf Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper (>= 9), gettext, gettext-base, libgettextpo0, libncurses5-dev, libmpd-dev, libncursesw5-dev, libglib2.0-dev, gnulib, libboost-regex-dev dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 18932 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper (>= 9); however: Package debhelper is not installed. pbuilder-satisfydepends-dummy depends on gettext; however: Package gettext is not installed. pbuilder-satisfydepends-dummy depends on gettext-base; however: Package gettext-base is not installed. pbuilder-satisfydepends-dummy depends on libgettextpo0; however: Package libgettextpo0 is not installed. pbuilder-satisfydepends-dummy depends on libncurses5-dev; however: Package libncurses5-dev is not installed. pbuilder-satisfydepends-dummy depends on libmpd-dev; however: Package libmpd-dev is not installed. pbuilder-satisfydepends-dummy depends on libncursesw5-dev; however: Package libncursesw5-dev is not installed. pbuilder-satisfydepends-dummy depends on libglib2.0-dev; however: Package libglib2.0-dev is not installed. pbuilder-satisfydepends-dummy depends on gnulib; however: Package gnulib is not installed. pbuilder-satisfydepends-dummy depends on libboost-regex-dev; however: Package libboost-regex-dev is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bison{a} bsdmainutils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} gnulib{a} gperf{a} groff-base{a} icu-devtools{a} intltool-debian{a} libarchive-zip-perl{a} libbison-dev{a} libblkid-dev{a} libboost-regex-dev{a} libboost-regex1.67-dev{a} libboost-regex1.67.0{a} libboost1.67-dev{a} libbsd0{a} libcroco3{a} libelf1{a} libexpat1{a} libffi-dev{a} libfile-stripnondeterminism-perl{a} libgettextpo0{a} libglib2.0-0{a} libglib2.0-bin{a} libglib2.0-data{a} libglib2.0-dev{a} libglib2.0-dev-bin{a} libicu-dev{a} libicu63{a} libmagic-mgc{a} libmagic1{a} libmount-dev{a} libmpd-dev{a} libmpd1{a} libmpdec2{a} libncurses-dev{a} libncurses5-dev{a} libncurses6{a} libpcre16-3{a} libpcre3-dev{a} libpcre32-3{a} libpcrecpp0v5{a} libpipeline1{a} libpython3-stdlib{a} libpython3.7-minimal{a} libpython3.7-stdlib{a} libreadline7{a} libselinux1-dev{a} libsepol1-dev{a} libsigsegv2{a} libssl1.1{a} libtext-unidecode-perl{a} libtool{a} libuchardet0{a} libxml-libxml-perl{a} libxml-namespacesupport-perl{a} libxml-sax-base-perl{a} libxml-sax-perl{a} libxml2{a} m4{a} man-db{a} mime-support{a} pkg-config{a} po-debconf{a} python3{a} python3-distutils{a} python3-lib2to3{a} python3-minimal{a} python3.7{a} python3.7-minimal{a} readline-common{a} sensible-utils{a} tex-common{a} texinfo{a} ucf{a} uuid-dev{a} zlib1g-dev{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libgpm2 libltdl-dev libmail-sendmail-perl libwww-perl libxml-sax-expat-perl lynx shared-mime-info wget xdg-user-dirs 0 packages upgraded, 87 newly installed, 0 to remove and 0 not upgraded. Need to get 56.6 MB of archives. After unpacking 342 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian buster/main armhf libbsd0 armhf 0.9.1-2 [103 kB] Get: 2 http://deb.debian.org/debian buster/main armhf bsdmainutils armhf 11.1.2+b1 [186 kB] Get: 3 http://deb.debian.org/debian buster/main armhf libuchardet0 armhf 0.0.6-3 [62.2 kB] Get: 4 http://deb.debian.org/debian buster/main armhf groff-base armhf 1.22.4-3 [828 kB] Get: 5 http://deb.debian.org/debian buster/main armhf libpipeline1 armhf 1.5.1-2 [26.8 kB] Get: 6 http://deb.debian.org/debian buster/main armhf man-db armhf 2.8.5-2 [1240 kB] Get: 7 http://deb.debian.org/debian buster/main armhf libssl1.1 armhf 1.1.1d-0+deb10u3 [1299 kB] Get: 8 http://deb.debian.org/debian buster/main armhf libpython3.7-minimal armhf 3.7.3-2+deb10u2 [582 kB] Get: 9 http://deb.debian.org/debian buster/main armhf libexpat1 armhf 2.2.6-2+deb10u1 [78.0 kB] Get: 10 http://deb.debian.org/debian buster/main armhf python3.7-minimal armhf 3.7.3-2+deb10u2 [1466 kB] Get: 11 http://deb.debian.org/debian buster/main armhf python3-minimal armhf 3.7.3-1 [36.6 kB] Get: 12 http://deb.debian.org/debian buster/main armhf mime-support all 3.62 [37.2 kB] Get: 13 http://deb.debian.org/debian buster/main armhf libmpdec2 armhf 2.4.2-2 [69.3 kB] Get: 14 http://deb.debian.org/debian buster/main armhf readline-common all 7.0-5 [70.6 kB] Get: 15 http://deb.debian.org/debian buster/main armhf libreadline7 armhf 7.0-5 [131 kB] Get: 16 http://deb.debian.org/debian buster/main armhf libpython3.7-stdlib armhf 3.7.3-2+deb10u2 [1660 kB] Get: 17 http://deb.debian.org/debian buster/main armhf python3.7 armhf 3.7.3-2+deb10u2 [330 kB] Get: 18 http://deb.debian.org/debian buster/main armhf libpython3-stdlib armhf 3.7.3-1 [20.0 kB] Get: 19 http://deb.debian.org/debian buster/main armhf python3 armhf 3.7.3-1 [61.5 kB] Get: 20 http://deb.debian.org/debian buster/main armhf sensible-utils all 0.0.12 [15.8 kB] Get: 21 http://deb.debian.org/debian buster/main armhf ucf all 3.0038+nmu1 [69.0 kB] Get: 22 http://deb.debian.org/debian buster/main armhf tex-common all 6.11 [53.1 kB] Get: 23 http://deb.debian.org/debian buster/main armhf libmagic-mgc armhf 1:5.35-4+deb10u1 [242 kB] Get: 24 http://deb.debian.org/debian buster/main armhf libmagic1 armhf 1:5.35-4+deb10u1 [110 kB] Get: 25 http://deb.debian.org/debian buster/main armhf file armhf 1:5.35-4+deb10u1 [65.5 kB] Get: 26 http://deb.debian.org/debian buster/main armhf gettext-base armhf 0.19.8.1-9 [118 kB] Get: 27 http://deb.debian.org/debian buster/main armhf libsigsegv2 armhf 2.12-2 [32.1 kB] Get: 28 http://deb.debian.org/debian buster/main armhf m4 armhf 1.4.18-2 [190 kB] Get: 29 http://deb.debian.org/debian buster/main armhf autoconf all 2.69-11 [341 kB] Get: 30 http://deb.debian.org/debian buster/main armhf autotools-dev all 20180224.1 [77.0 kB] Get: 31 http://deb.debian.org/debian buster/main armhf automake all 1:1.16.1-4 [771 kB] Get: 32 http://deb.debian.org/debian buster/main armhf autopoint all 0.19.8.1-9 [434 kB] Get: 33 http://deb.debian.org/debian buster/main armhf libbison-dev armhf 2:3.3.2.dfsg-1 [500 kB] Get: 34 http://deb.debian.org/debian buster/main armhf bison armhf 2:3.3.2.dfsg-1 [848 kB] Get: 35 http://deb.debian.org/debian buster/main armhf libtool all 2.4.6-9 [547 kB] Get: 36 http://deb.debian.org/debian buster/main armhf dh-autoreconf all 19 [16.9 kB] Get: 37 http://deb.debian.org/debian buster/main armhf libarchive-zip-perl all 1.64-1 [96.8 kB] Get: 38 http://deb.debian.org/debian buster/main armhf libfile-stripnondeterminism-perl all 1.1.2-1 [19.8 kB] Get: 39 http://deb.debian.org/debian buster/main armhf dh-strip-nondeterminism all 1.1.2-1 [13.0 kB] Get: 40 http://deb.debian.org/debian buster/main armhf libelf1 armhf 0.176-1.1 [158 kB] Get: 41 http://deb.debian.org/debian buster/main armhf dwz armhf 0.12-3 [72.0 kB] Get: 42 http://deb.debian.org/debian buster/main armhf libglib2.0-0 armhf 2.58.3-2+deb10u2 [1101 kB] Get: 43 http://deb.debian.org/debian buster/main armhf libicu63 armhf 63.1-6+deb10u1 [8005 kB] Get: 44 http://deb.debian.org/debian buster/main armhf libxml2 armhf 2.9.4+dfsg1-7+b3 [595 kB] Get: 45 http://deb.debian.org/debian buster/main armhf libcroco3 armhf 0.6.12-3 [133 kB] Get: 46 http://deb.debian.org/debian buster/main armhf libncurses6 armhf 6.1+20181013-2+deb10u2 [79.8 kB] Get: 47 http://deb.debian.org/debian buster/main armhf gettext armhf 0.19.8.1-9 [1242 kB] Get: 48 http://deb.debian.org/debian buster/main armhf intltool-debian all 0.35.0+20060710.5 [26.8 kB] Get: 49 http://deb.debian.org/debian buster/main armhf po-debconf all 1.0.21 [248 kB] Get: 50 http://deb.debian.org/debian buster/main armhf debhelper all 12.1.1 [1016 kB] Get: 51 http://deb.debian.org/debian buster/main armhf gperf armhf 3.1-1 [144 kB] Get: 52 http://deb.debian.org/debian buster/main armhf libtext-unidecode-perl all 1.30-1 [103 kB] Get: 53 http://deb.debian.org/debian buster/main armhf libxml-namespacesupport-perl all 1.12-1 [14.8 kB] Get: 54 http://deb.debian.org/debian buster/main armhf libxml-sax-base-perl all 1.09-1 [20.4 kB] Get: 55 http://deb.debian.org/debian buster/main armhf libxml-sax-perl all 1.00+dfsg-1 [58.6 kB] Get: 56 http://deb.debian.org/debian buster/main armhf libxml-libxml-perl armhf 2.0134+dfsg-1 [326 kB] Get: 57 http://deb.debian.org/debian buster/main armhf texinfo armhf 6.5.0.dfsg.1-4+b1 [1421 kB] Get: 58 http://deb.debian.org/debian buster/main armhf gnulib all 20140202+stable-4 [4408 kB] Get: 59 http://deb.debian.org/debian buster/main armhf icu-devtools armhf 63.1-6+deb10u1 [168 kB] Get: 60 http://deb.debian.org/debian buster/main armhf uuid-dev armhf 2.33.1-0.1 [92.6 kB] Get: 61 http://deb.debian.org/debian buster/main armhf libblkid-dev armhf 2.33.1-0.1 [217 kB] Get: 62 http://deb.debian.org/debian buster/main armhf libboost1.67-dev armhf 1.67.0-13+deb10u1 [8388 kB] Get: 63 http://deb.debian.org/debian buster/main armhf libboost-regex1.67.0 armhf 1.67.0-13+deb10u1 [438 kB] Get: 64 http://deb.debian.org/debian buster/main armhf libicu-dev armhf 63.1-6+deb10u1 [8940 kB] Get: 65 http://deb.debian.org/debian buster/main armhf libboost-regex1.67-dev armhf 1.67.0-13+deb10u1 [538 kB] Get: 66 http://deb.debian.org/debian buster/main armhf libboost-regex-dev armhf 1.67.0.1 [3916 B] Get: 67 http://deb.debian.org/debian buster/main armhf libffi-dev armhf 3.2.1-9 [154 kB] Get: 68 http://deb.debian.org/debian buster/main armhf libgettextpo0 armhf 0.19.8.1-9 [125 kB] Get: 69 http://deb.debian.org/debian buster/main armhf libglib2.0-data all 2.58.3-2+deb10u2 [1110 kB] Get: 70 http://deb.debian.org/debian buster/main armhf libglib2.0-bin armhf 2.58.3-2+deb10u2 [119 kB] Get: 71 http://deb.debian.org/debian buster/main armhf python3-lib2to3 all 3.7.3-1 [76.7 kB] Get: 72 http://deb.debian.org/debian buster/main armhf python3-distutils all 3.7.3-1 [142 kB] Get: 73 http://deb.debian.org/debian buster/main armhf libglib2.0-dev-bin armhf 2.58.3-2+deb10u2 [155 kB] Get: 74 http://deb.debian.org/debian buster/main armhf libmount-dev armhf 2.33.1-0.1 [223 kB] Get: 75 http://deb.debian.org/debian buster/main armhf libpcre16-3 armhf 2:8.39-12 [238 kB] Get: 76 http://deb.debian.org/debian buster/main armhf libpcre32-3 armhf 2:8.39-12 [231 kB] Get: 77 http://deb.debian.org/debian buster/main armhf libpcrecpp0v5 armhf 2:8.39-12 [150 kB] Get: 78 http://deb.debian.org/debian buster/main armhf libpcre3-dev armhf 2:8.39-12 [585 kB] Get: 79 http://deb.debian.org/debian buster/main armhf libsepol1-dev armhf 2.8-1 [318 kB] Get: 80 http://deb.debian.org/debian buster/main armhf libselinux1-dev armhf 2.8-1+b1 [162 kB] Get: 81 http://deb.debian.org/debian buster/main armhf pkg-config armhf 0.29-6 [60.7 kB] Get: 82 http://deb.debian.org/debian buster/main armhf zlib1g-dev armhf 1:1.2.11.dfsg-1 [207 kB] Get: 83 http://deb.debian.org/debian buster/main armhf libglib2.0-dev armhf 2.58.3-2+deb10u2 [1386 kB] Get: 84 http://deb.debian.org/debian buster/main armhf libmpd1 armhf 0.20.0-3 [35.3 kB] Get: 85 http://deb.debian.org/debian buster/main armhf libmpd-dev armhf 0.20.0-3 [17.9 kB] Get: 86 http://deb.debian.org/debian buster/main armhf libncurses-dev armhf 6.1+20181013-2+deb10u2 [295 kB] Get: 87 http://deb.debian.org/debian buster/main armhf libncurses5-dev armhf 6.1+20181013-2+deb10u2 [948 B] Fetched 56.6 MB in 7s (8538 kB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package libbsd0:armhf. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 18932 files and directories currently installed.) Preparing to unpack .../0-libbsd0_0.9.1-2_armhf.deb ... Unpacking libbsd0:armhf (0.9.1-2) ... Selecting previously unselected package bsdmainutils. Preparing to unpack .../1-bsdmainutils_11.1.2+b1_armhf.deb ... Unpacking bsdmainutils (11.1.2+b1) ... Selecting previously unselected package libuchardet0:armhf. Preparing to unpack .../2-libuchardet0_0.0.6-3_armhf.deb ... Unpacking libuchardet0:armhf (0.0.6-3) ... Selecting previously unselected package groff-base. Preparing to unpack .../3-groff-base_1.22.4-3_armhf.deb ... Unpacking groff-base (1.22.4-3) ... Selecting previously unselected package libpipeline1:armhf. Preparing to unpack .../4-libpipeline1_1.5.1-2_armhf.deb ... Unpacking libpipeline1:armhf (1.5.1-2) ... Selecting previously unselected package man-db. Preparing to unpack .../5-man-db_2.8.5-2_armhf.deb ... Unpacking man-db (2.8.5-2) ... Selecting previously unselected package libssl1.1:armhf. Preparing to unpack .../6-libssl1.1_1.1.1d-0+deb10u3_armhf.deb ... Unpacking libssl1.1:armhf (1.1.1d-0+deb10u3) ... Selecting previously unselected package libpython3.7-minimal:armhf. Preparing to unpack .../7-libpython3.7-minimal_3.7.3-2+deb10u2_armhf.deb ... Unpacking libpython3.7-minimal:armhf (3.7.3-2+deb10u2) ... Selecting previously unselected package libexpat1:armhf. Preparing to unpack .../8-libexpat1_2.2.6-2+deb10u1_armhf.deb ... Unpacking libexpat1:armhf (2.2.6-2+deb10u1) ... Selecting previously unselected package python3.7-minimal. Preparing to unpack .../9-python3.7-minimal_3.7.3-2+deb10u2_armhf.deb ... Unpacking python3.7-minimal (3.7.3-2+deb10u2) ... Setting up libssl1.1:armhf (1.1.1d-0+deb10u3) ... Setting up libpython3.7-minimal:armhf (3.7.3-2+deb10u2) ... Setting up libexpat1:armhf (2.2.6-2+deb10u1) ... Setting up python3.7-minimal (3.7.3-2+deb10u2) ... Selecting previously unselected package python3-minimal. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19827 files and directories currently installed.) Preparing to unpack .../0-python3-minimal_3.7.3-1_armhf.deb ... Unpacking python3-minimal (3.7.3-1) ... Selecting previously unselected package mime-support. Preparing to unpack .../1-mime-support_3.62_all.deb ... Unpacking mime-support (3.62) ... Selecting previously unselected package libmpdec2:armhf. Preparing to unpack .../2-libmpdec2_2.4.2-2_armhf.deb ... Unpacking libmpdec2:armhf (2.4.2-2) ... Selecting previously unselected package readline-common. Preparing to unpack .../3-readline-common_7.0-5_all.deb ... Unpacking readline-common (7.0-5) ... Selecting previously unselected package libreadline7:armhf. Preparing to unpack .../4-libreadline7_7.0-5_armhf.deb ... Unpacking libreadline7:armhf (7.0-5) ... Selecting previously unselected package libpython3.7-stdlib:armhf. Preparing to unpack .../5-libpython3.7-stdlib_3.7.3-2+deb10u2_armhf.deb ... Unpacking libpython3.7-stdlib:armhf (3.7.3-2+deb10u2) ... Selecting previously unselected package python3.7. Preparing to unpack .../6-python3.7_3.7.3-2+deb10u2_armhf.deb ... Unpacking python3.7 (3.7.3-2+deb10u2) ... Selecting previously unselected package libpython3-stdlib:armhf. Preparing to unpack .../7-libpython3-stdlib_3.7.3-1_armhf.deb ... Unpacking libpython3-stdlib:armhf (3.7.3-1) ... Setting up python3-minimal (3.7.3-1) ... Selecting previously unselected package python3. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20288 files and directories currently installed.) Preparing to unpack .../00-python3_3.7.3-1_armhf.deb ... Unpacking python3 (3.7.3-1) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../01-sensible-utils_0.0.12_all.deb ... Unpacking sensible-utils (0.0.12) ... Selecting previously unselected package ucf. Preparing to unpack .../02-ucf_3.0038+nmu1_all.deb ... Moving old data out of the way Unpacking ucf (3.0038+nmu1) ... Selecting previously unselected package tex-common. Preparing to unpack .../03-tex-common_6.11_all.deb ... Unpacking tex-common (6.11) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../04-libmagic-mgc_1%3a5.35-4+deb10u1_armhf.deb ... Unpacking libmagic-mgc (1:5.35-4+deb10u1) ... Selecting previously unselected package libmagic1:armhf. Preparing to unpack .../05-libmagic1_1%3a5.35-4+deb10u1_armhf.deb ... Unpacking libmagic1:armhf (1:5.35-4+deb10u1) ... Selecting previously unselected package file. Preparing to unpack .../06-file_1%3a5.35-4+deb10u1_armhf.deb ... Unpacking file (1:5.35-4+deb10u1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../07-gettext-base_0.19.8.1-9_armhf.deb ... Unpacking gettext-base (0.19.8.1-9) ... Selecting previously unselected package libsigsegv2:armhf. Preparing to unpack .../08-libsigsegv2_2.12-2_armhf.deb ... Unpacking libsigsegv2:armhf (2.12-2) ... Selecting previously unselected package m4. Preparing to unpack .../09-m4_1.4.18-2_armhf.deb ... Unpacking m4 (1.4.18-2) ... Selecting previously unselected package autoconf. Preparing to unpack .../10-autoconf_2.69-11_all.deb ... Unpacking autoconf (2.69-11) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../11-autotools-dev_20180224.1_all.deb ... Unpacking autotools-dev (20180224.1) ... Selecting previously unselected package automake. Preparing to unpack .../12-automake_1%3a1.16.1-4_all.deb ... Unpacking automake (1:1.16.1-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../13-autopoint_0.19.8.1-9_all.deb ... Unpacking autopoint (0.19.8.1-9) ... Selecting previously unselected package libbison-dev:armhf. Preparing to unpack .../14-libbison-dev_2%3a3.3.2.dfsg-1_armhf.deb ... Unpacking libbison-dev:armhf (2:3.3.2.dfsg-1) ... Selecting previously unselected package bison. Preparing to unpack .../15-bison_2%3a3.3.2.dfsg-1_armhf.deb ... Unpacking bison (2:3.3.2.dfsg-1) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.4.6-9_all.deb ... Unpacking libtool (2.4.6-9) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_19_all.deb ... Unpacking dh-autoreconf (19) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.64-1_all.deb ... Unpacking libarchive-zip-perl (1.64-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.1.2-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.1.2-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.1.2-1_all.deb ... Unpacking dh-strip-nondeterminism (1.1.2-1) ... Selecting previously unselected package libelf1:armhf. Preparing to unpack .../21-libelf1_0.176-1.1_armhf.deb ... Unpacking libelf1:armhf (0.176-1.1) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.12-3_armhf.deb ... Unpacking dwz (0.12-3) ... Selecting previously unselected package libglib2.0-0:armhf. Preparing to unpack .../23-libglib2.0-0_2.58.3-2+deb10u2_armhf.deb ... Unpacking libglib2.0-0:armhf (2.58.3-2+deb10u2) ... Selecting previously unselected package libicu63:armhf. Preparing to unpack .../24-libicu63_63.1-6+deb10u1_armhf.deb ... Unpacking libicu63:armhf (63.1-6+deb10u1) ... Selecting previously unselected package libxml2:armhf. Preparing to unpack .../25-libxml2_2.9.4+dfsg1-7+b3_armhf.deb ... Unpacking libxml2:armhf (2.9.4+dfsg1-7+b3) ... Selecting previously unselected package libcroco3:armhf. Preparing to unpack .../26-libcroco3_0.6.12-3_armhf.deb ... Unpacking libcroco3:armhf (0.6.12-3) ... Selecting previously unselected package libncurses6:armhf. Preparing to unpack .../27-libncurses6_6.1+20181013-2+deb10u2_armhf.deb ... Unpacking libncurses6:armhf (6.1+20181013-2+deb10u2) ... Selecting previously unselected package gettext. Preparing to unpack .../28-gettext_0.19.8.1-9_armhf.deb ... Unpacking gettext (0.19.8.1-9) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../29-intltool-debian_0.35.0+20060710.5_all.deb ... Unpacking intltool-debian (0.35.0+20060710.5) ... Selecting previously unselected package po-debconf. Preparing to unpack .../30-po-debconf_1.0.21_all.deb ... Unpacking po-debconf (1.0.21) ... Selecting previously unselected package debhelper. Preparing to unpack .../31-debhelper_12.1.1_all.deb ... Unpacking debhelper (12.1.1) ... Selecting previously unselected package gperf. Preparing to unpack .../32-gperf_3.1-1_armhf.deb ... Unpacking gperf (3.1-1) ... Selecting previously unselected package libtext-unidecode-perl. Preparing to unpack .../33-libtext-unidecode-perl_1.30-1_all.deb ... Unpacking libtext-unidecode-perl (1.30-1) ... Selecting previously unselected package libxml-namespacesupport-perl. Preparing to unpack .../34-libxml-namespacesupport-perl_1.12-1_all.deb ... Unpacking libxml-namespacesupport-perl (1.12-1) ... Selecting previously unselected package libxml-sax-base-perl. Preparing to unpack .../35-libxml-sax-base-perl_1.09-1_all.deb ... Unpacking libxml-sax-base-perl (1.09-1) ... Selecting previously unselected package libxml-sax-perl. Preparing to unpack .../36-libxml-sax-perl_1.00+dfsg-1_all.deb ... Unpacking libxml-sax-perl (1.00+dfsg-1) ... Selecting previously unselected package libxml-libxml-perl. Preparing to unpack .../37-libxml-libxml-perl_2.0134+dfsg-1_armhf.deb ... Unpacking libxml-libxml-perl (2.0134+dfsg-1) ... Selecting previously unselected package texinfo. Preparing to unpack .../38-texinfo_6.5.0.dfsg.1-4+b1_armhf.deb ... Unpacking texinfo (6.5.0.dfsg.1-4+b1) ... Selecting previously unselected package gnulib. Preparing to unpack .../39-gnulib_20140202+stable-4_all.deb ... Unpacking gnulib (20140202+stable-4) ... Selecting previously unselected package icu-devtools. Preparing to unpack .../40-icu-devtools_63.1-6+deb10u1_armhf.deb ... Unpacking icu-devtools (63.1-6+deb10u1) ... Selecting previously unselected package uuid-dev:armhf. Preparing to unpack .../41-uuid-dev_2.33.1-0.1_armhf.deb ... Unpacking uuid-dev:armhf (2.33.1-0.1) ... Selecting previously unselected package libblkid-dev:armhf. Preparing to unpack .../42-libblkid-dev_2.33.1-0.1_armhf.deb ... Unpacking libblkid-dev:armhf (2.33.1-0.1) ... Selecting previously unselected package libboost1.67-dev:armhf. Preparing to unpack .../43-libboost1.67-dev_1.67.0-13+deb10u1_armhf.deb ... Unpacking libboost1.67-dev:armhf (1.67.0-13+deb10u1) ... Selecting previously unselected package libboost-regex1.67.0:armhf. Preparing to unpack .../44-libboost-regex1.67.0_1.67.0-13+deb10u1_armhf.deb ... Unpacking libboost-regex1.67.0:armhf (1.67.0-13+deb10u1) ... Selecting previously unselected package libicu-dev:armhf. Preparing to unpack .../45-libicu-dev_63.1-6+deb10u1_armhf.deb ... Unpacking libicu-dev:armhf (63.1-6+deb10u1) ... Selecting previously unselected package libboost-regex1.67-dev:armhf. Preparing to unpack .../46-libboost-regex1.67-dev_1.67.0-13+deb10u1_armhf.deb ... Unpacking libboost-regex1.67-dev:armhf (1.67.0-13+deb10u1) ... Selecting previously unselected package libboost-regex-dev:armhf. Preparing to unpack .../47-libboost-regex-dev_1.67.0.1_armhf.deb ... Unpacking libboost-regex-dev:armhf (1.67.0.1) ... Selecting previously unselected package libffi-dev:armhf. Preparing to unpack .../48-libffi-dev_3.2.1-9_armhf.deb ... Unpacking libffi-dev:armhf (3.2.1-9) ... Selecting previously unselected package libgettextpo0:armhf. Preparing to unpack .../49-libgettextpo0_0.19.8.1-9_armhf.deb ... Unpacking libgettextpo0:armhf (0.19.8.1-9) ... Selecting previously unselected package libglib2.0-data. Preparing to unpack .../50-libglib2.0-data_2.58.3-2+deb10u2_all.deb ... Unpacking libglib2.0-data (2.58.3-2+deb10u2) ... Selecting previously unselected package libglib2.0-bin. Preparing to unpack .../51-libglib2.0-bin_2.58.3-2+deb10u2_armhf.deb ... Unpacking libglib2.0-bin (2.58.3-2+deb10u2) ... Selecting previously unselected package python3-lib2to3. Preparing to unpack .../52-python3-lib2to3_3.7.3-1_all.deb ... Unpacking python3-lib2to3 (3.7.3-1) ... Selecting previously unselected package python3-distutils. Preparing to unpack .../53-python3-distutils_3.7.3-1_all.deb ... Unpacking python3-distutils (3.7.3-1) ... Selecting previously unselected package libglib2.0-dev-bin. Preparing to unpack .../54-libglib2.0-dev-bin_2.58.3-2+deb10u2_armhf.deb ... Unpacking libglib2.0-dev-bin (2.58.3-2+deb10u2) ... Selecting previously unselected package libmount-dev:armhf. Preparing to unpack .../55-libmount-dev_2.33.1-0.1_armhf.deb ... Unpacking libmount-dev:armhf (2.33.1-0.1) ... Selecting previously unselected package libpcre16-3:armhf. Preparing to unpack .../56-libpcre16-3_2%3a8.39-12_armhf.deb ... Unpacking libpcre16-3:armhf (2:8.39-12) ... Selecting previously unselected package libpcre32-3:armhf. Preparing to unpack .../57-libpcre32-3_2%3a8.39-12_armhf.deb ... Unpacking libpcre32-3:armhf (2:8.39-12) ... Selecting previously unselected package libpcrecpp0v5:armhf. Preparing to unpack .../58-libpcrecpp0v5_2%3a8.39-12_armhf.deb ... Unpacking libpcrecpp0v5:armhf (2:8.39-12) ... Selecting previously unselected package libpcre3-dev:armhf. Preparing to unpack .../59-libpcre3-dev_2%3a8.39-12_armhf.deb ... Unpacking libpcre3-dev:armhf (2:8.39-12) ... Selecting previously unselected package libsepol1-dev:armhf. Preparing to unpack .../60-libsepol1-dev_2.8-1_armhf.deb ... Unpacking libsepol1-dev:armhf (2.8-1) ... Selecting previously unselected package libselinux1-dev:armhf. Preparing to unpack .../61-libselinux1-dev_2.8-1+b1_armhf.deb ... Unpacking libselinux1-dev:armhf (2.8-1+b1) ... Selecting previously unselected package pkg-config. Preparing to unpack .../62-pkg-config_0.29-6_armhf.deb ... Unpacking pkg-config (0.29-6) ... Selecting previously unselected package zlib1g-dev:armhf. Preparing to unpack .../63-zlib1g-dev_1%3a1.2.11.dfsg-1_armhf.deb ... Unpacking zlib1g-dev:armhf (1:1.2.11.dfsg-1) ... Selecting previously unselected package libglib2.0-dev:armhf. Preparing to unpack .../64-libglib2.0-dev_2.58.3-2+deb10u2_armhf.deb ... Unpacking libglib2.0-dev:armhf (2.58.3-2+deb10u2) ... Selecting previously unselected package libmpd1:armhf. Preparing to unpack .../65-libmpd1_0.20.0-3_armhf.deb ... Unpacking libmpd1:armhf (0.20.0-3) ... Selecting previously unselected package libmpd-dev:armhf. Preparing to unpack .../66-libmpd-dev_0.20.0-3_armhf.deb ... Unpacking libmpd-dev:armhf (0.20.0-3) ... Selecting previously unselected package libncurses-dev:armhf. Preparing to unpack .../67-libncurses-dev_6.1+20181013-2+deb10u2_armhf.deb ... Unpacking libncurses-dev:armhf (6.1+20181013-2+deb10u2) ... Selecting previously unselected package libncurses5-dev:armhf. Preparing to unpack .../68-libncurses5-dev_6.1+20181013-2+deb10u2_armhf.deb ... Unpacking libncurses5-dev:armhf (6.1+20181013-2+deb10u2) ... Setting up libboost1.67-dev:armhf (1.67.0-13+deb10u1) ... Setting up libpcrecpp0v5:armhf (2:8.39-12) ... Setting up libpipeline1:armhf (1.5.1-2) ... Setting up mime-support (3.62) ... Setting up libpcre16-3:armhf (2:8.39-12) ... Setting up libbison-dev:armhf (2:3.3.2.dfsg-1) ... Setting up libmagic-mgc (1:5.35-4+deb10u1) ... Setting up libarchive-zip-perl (1.64-1) ... Setting up libglib2.0-0:armhf (2.58.3-2+deb10u2) ... No schema files found: doing nothing. Setting up libmagic1:armhf (1:5.35-4+deb10u1) ... Setting up libsepol1-dev:armhf (2.8-1) ... Setting up libxml-namespacesupport-perl (1.12-1) ... Setting up gettext-base (0.19.8.1-9) ... Setting up file (1:5.35-4+deb10u1) ... Setting up libgettextpo0:armhf (0.19.8.1-9) ... Setting up libffi-dev:armhf (3.2.1-9) ... Setting up gperf (3.1-1) ... Setting up libicu63:armhf (63.1-6+deb10u1) ... Setting up libxml-sax-base-perl (1.09-1) ... Setting up autotools-dev (20180224.1) ... Setting up libglib2.0-data (2.58.3-2+deb10u2) ... Setting up uuid-dev:armhf (2.33.1-0.1) ... Setting up libncurses6:armhf (6.1+20181013-2+deb10u2) ... Setting up libsigsegv2:armhf (2.12-2) ... Setting up libpcre32-3:armhf (2:8.39-12) ... Setting up autopoint (0.19.8.1-9) ... Setting up icu-devtools (63.1-6+deb10u1) ... Setting up pkg-config (0.29-6) ... Setting up zlib1g-dev:armhf (1:1.2.11.dfsg-1) ... Setting up libmpd1:armhf (0.20.0-3) ... Setting up sensible-utils (0.0.12) ... Setting up libuchardet0:armhf (0.0.6-3) ... Setting up libmpdec2:armhf (2.4.2-2) ... Setting up libtext-unidecode-perl (1.30-1) ... Setting up libbsd0:armhf (0.9.1-2) ... Setting up libelf1:armhf (0.176-1.1) ... Setting up readline-common (7.0-5) ... Setting up libicu-dev:armhf (63.1-6+deb10u1) ... Setting up libxml2:armhf (2.9.4+dfsg1-7+b3) ... Setting up libreadline7:armhf (7.0-5) ... Setting up libfile-stripnondeterminism-perl (1.1.2-1) ... Setting up libblkid-dev:armhf (2.33.1-0.1) ... Setting up libpython3.7-stdlib:armhf (3.7.3-2+deb10u2) ... Setting up libncurses-dev:armhf (6.1+20181013-2+deb10u2) ... Setting up libboost-regex1.67.0:armhf (1.67.0-13+deb10u1) ... Setting up libtool (2.4.6-9) ... Setting up libpcre3-dev:armhf (2:8.39-12) ... Setting up libboost-regex1.67-dev:armhf (1.67.0-13+deb10u1) ... Setting up libglib2.0-bin (2.58.3-2+deb10u2) ... Setting up m4 (1.4.18-2) ... Setting up bsdmainutils (11.1.2+b1) ... update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode Setting up libcroco3:armhf (0.6.12-3) ... Setting up ucf (3.0038+nmu1) ... Setting up autoconf (2.69-11) ... Setting up dwz (0.12-3) ... Setting up groff-base (1.22.4-3) ... Setting up libncurses5-dev:armhf (6.1+20181013-2+deb10u2) ... Setting up bison (2:3.3.2.dfsg-1) ... update-alternatives: using /usr/bin/bison.yacc to provide /usr/bin/yacc (yacc) in auto mode Setting up libboost-regex-dev:armhf (1.67.0.1) ... Setting up libmount-dev:armhf (2.33.1-0.1) ... Setting up libpython3-stdlib:armhf (3.7.3-1) ... Setting up automake (1:1.16.1-4) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up python3.7 (3.7.3-2+deb10u2) ... Setting up gettext (0.19.8.1-9) ... Setting up libselinux1-dev:armhf (2.8-1+b1) ... Setting up python3 (3.7.3-1) ... Setting up man-db (2.8.5-2) ... Not building database; man-db/auto-update is not 'true'. Setting up libxml-sax-perl (1.00+dfsg-1) ... update-perl-sax-parsers: Registering Perl SAX parser XML::SAX::PurePerl with priority 10... update-perl-sax-parsers: Updating overall Perl SAX parser modules info file... Creating config file /etc/perl/XML/SAX/ParserDetails.ini with new version Setting up intltool-debian (0.35.0+20060710.5) ... Setting up tex-common (6.11) ... update-language: texlive-base not installed and configured, doing nothing! Setting up libxml-libxml-perl (2.0134+dfsg-1) ... update-perl-sax-parsers: Registering Perl SAX parser XML::LibXML::SAX::Parser with priority 50... update-perl-sax-parsers: Registering Perl SAX parser XML::LibXML::SAX with priority 50... update-perl-sax-parsers: Updating overall Perl SAX parser modules info file... Replacing config file /etc/perl/XML/SAX/ParserDetails.ini with new version Setting up python3-lib2to3 (3.7.3-1) ... Setting up python3-distutils (3.7.3-1) ... Setting up libglib2.0-dev-bin (2.58.3-2+deb10u2) ... Setting up po-debconf (1.0.21) ... Setting up libglib2.0-dev:armhf (2.58.3-2+deb10u2) ... Setting up libmpd-dev:armhf (0.20.0-3) ... Setting up texinfo (6.5.0.dfsg.1-4+b1) ... Setting up gnulib (20140202+stable-4) ... Setting up debhelper (12.1.1) ... Setting up dh-autoreconf (19) ... Setting up dh-strip-nondeterminism (1.1.2-1) ... Processing triggers for libc-bin (2.28-10) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.23-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/pms-0.42/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b dpkg-buildpackage: info: source package pms dpkg-buildpackage: info: source version 0.42-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Alejandro Garrido Mota dpkg-source --before-build . dpkg-buildpackage: info: host architecture armhf fakeroot debian/rules clean dh clean dh_clean debian/rules build dh build dh_update_autotools_config dh_auto_configure ./configure --build=arm-linux-gnueabihf --prefix=/usr --includedir=\${prefix}/include --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info --sysconfdir=/etc --localstatedir=/var --disable-silent-rules --libdir=\${prefix}/lib/arm-linux-gnueabihf --libexecdir=\${prefix}/lib/arm-linux-gnueabihf --disable-maintainer-mode --disable-dependency-tracking configure: WARNING: unrecognized options: --disable-silent-rules, --disable-maintainer-mode checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for working ncursesw... yes checking ncursesw/curses.h usability... yes checking ncursesw/curses.h presence... yes checking for ncursesw/curses.h... yes checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking for style of include used by make... GNU checking dependency style of gcc... none checking for g++... g++ checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking dependency style of g++... none checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for GLIB... yes checking locale.h usability... yes checking locale.h presence... yes checking for locale.h... yes checking for LC_MESSAGES... yes checking libintl.h usability... yes checking libintl.h presence... yes checking for libintl.h... yes checking for ngettext in libc... yes checking for dgettext in libc... yes checking for bind_textdomain_codeset... yes checking for msgfmt... /usr/bin/msgfmt checking for dcgettext... yes checking if msgfmt accepts -c... yes checking for gmsgfmt... /usr/bin/msgfmt checking for xgettext... /usr/bin/xgettext configure: creating ./config.status config.status: creating Makefile config.status: creating po/Makefile.in config.status: creating config.h config.status: executing depfiles commands config.status: executing default-1 commands configure: WARNING: unrecognized options: --disable-silent-rules, --disable-maintainer-mode dh_auto_build make -j1 make[1]: Entering directory '/build/pms-0.42' CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/bash /build/pms-0.42/missing --run aclocal-1.11 -I m4 /build/pms-0.42/missing: line 52: aclocal-1.11: command not found WARNING: `aclocal-1.11' is missing on your system. You should only need it if you modified `acinclude.m4' or `configure.ac'. You might want to install the `Automake' and `Perl' packages. Grab them from any GNU archive site. cd . && /bin/bash /build/pms-0.42/missing --run automake-1.11 --foreign /build/pms-0.42/missing: line 52: automake-1.11: command not found WARNING: `automake-1.11' is missing on your system. You should only need it if you modified `Makefile.am', `acinclude.m4' or `configure.ac'. You might want to install the `Automake' and `Perl' packages. Grab them from any GNU archive site. CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/bash /build/pms-0.42/missing --run autoconf aclocal.m4:16: warning: this file was generated for autoconf 2.65. You have another version of autoconf. It may work, but is not guaranteed to. If you have problems, you may need to regenerate the build system entirely. To do so, use the procedure documented by the package, typically `autoreconf'. /bin/bash ./config.status --recheck running CONFIG_SHELL=/bin/bash /bin/bash ./configure --build=arm-linux-gnueabihf --prefix=/usr --includedir=${prefix}/include --mandir=${prefix}/share/man --infodir=${prefix}/share/info --sysconfdir=/etc --localstatedir=/var --disable-silent-rules --libdir=${prefix}/lib/arm-linux-gnueabihf --libexecdir=${prefix}/lib/arm-linux-gnueabihf --disable-maintainer-mode --disable-dependency-tracking build_alias=arm-linux-gnueabihf CFLAGS=-g -O2 -ffile-prefix-map=/build/pms-0.42=. -fstack-protector-strong -Wformat -Werror=format-security LDFLAGS=-Wl,-z,relro CPPFLAGS=-Wdate-time -D_FORTIFY_SOURCE=2 CXXFLAGS=-g -O2 -ffile-prefix-map=/build/pms-0.42=. -fstack-protector-strong -Wformat -Werror=format-security --no-create --no-recursion configure: WARNING: unrecognized options: --disable-silent-rules, --disable-maintainer-mode checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for working ncursesw... yes checking ncursesw/curses.h usability... yes checking ncursesw/curses.h presence... yes checking for ncursesw/curses.h... yes checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking for style of include used by make... GNU checking dependency style of gcc... none checking for g++... g++ checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking dependency style of g++... none checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for GLIB... yes checking locale.h usability... yes checking locale.h presence... yes checking for locale.h... yes checking for LC_MESSAGES... yes checking libintl.h usability... yes checking libintl.h presence... yes checking for libintl.h... yes checking for ngettext in libc... yes checking for dgettext in libc... yes checking for bind_textdomain_codeset... yes checking for msgfmt... /usr/bin/msgfmt checking for dcgettext... yes checking if msgfmt accepts -c... yes checking for gmsgfmt... /usr/bin/msgfmt checking for xgettext... /usr/bin/xgettext configure: creating ./config.status configure: WARNING: unrecognized options: --disable-silent-rules, --disable-maintainer-mode /bin/bash ./config.status config.status: creating Makefile config.status: creating po/Makefile.in config.status: creating config.h config.status: config.h is unchanged config.status: executing depfiles commands config.status: executing default-1 commands (CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/bash /build/pms-0.42/missing --run autoheader) rm -f stamp-h1 touch config.h.in cd . && /bin/bash ./config.status config.h config.status: creating config.h config.status: config.h is unchanged make all-am make[2]: Entering directory '/build/pms-0.42' g++ -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/pms-0.42=. -fstack-protector-strong -Wformat -Werror=format-security -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -DLOCALE_DIR=\""/usr/share/locale"\" -c -o action.o `test -f 'src/action.cpp' || echo './'`src/action.cpp g++ -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/pms-0.42=. -fstack-protector-strong -Wformat -Werror=format-security -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -DLOCALE_DIR=\""/usr/share/locale"\" -c -o color.o `test -f 'src/color.cpp' || echo './'`src/color.cpp g++ -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/pms-0.42=. -fstack-protector-strong -Wformat -Werror=format-security -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -DLOCALE_DIR=\""/usr/share/locale"\" -c -o command.o `test -f 'src/command.cpp' || echo './'`src/command.cpp g++ -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/pms-0.42=. -fstack-protector-strong -Wformat -Werror=format-security -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -DLOCALE_DIR=\""/usr/share/locale"\" -c -o config.o `test -f 'src/config.cpp' || echo './'`src/config.cpp g++ -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/pms-0.42=. -fstack-protector-strong -Wformat -Werror=format-security -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -DLOCALE_DIR=\""/usr/share/locale"\" -c -o conn.o `test -f 'src/conn.cpp' || echo './'`src/conn.cpp g++ -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/pms-0.42=. -fstack-protector-strong -Wformat -Werror=format-security -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -DLOCALE_DIR=\""/usr/share/locale"\" -c -o display.o `test -f 'src/display.cpp' || echo './'`src/display.cpp g++ -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/pms-0.42=. -fstack-protector-strong -Wformat -Werror=format-security -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -DLOCALE_DIR=\""/usr/share/locale"\" -c -o input.o `test -f 'src/input.cpp' || echo './'`src/input.cpp g++ -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/pms-0.42=. -fstack-protector-strong -Wformat -Werror=format-security -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -DLOCALE_DIR=\""/usr/share/locale"\" -c -o list.o `test -f 'src/list.cpp' || echo './'`src/list.cpp g++ -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/pms-0.42=. -fstack-protector-strong -Wformat -Werror=format-security -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -DLOCALE_DIR=\""/usr/share/locale"\" -c -o pms.o `test -f 'src/pms.cpp' || echo './'`src/pms.cpp g++ -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/pms-0.42=. -fstack-protector-strong -Wformat -Werror=format-security -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -DLOCALE_DIR=\""/usr/share/locale"\" -c -o song.o `test -f 'src/song.cpp' || echo './'`src/song.cpp gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/pms-0.42=. -fstack-protector-strong -Wformat -Werror=format-security -c -o libmpdclient.o `test -f 'src/libmpdclient.c' || echo './'`src/libmpdclient.c In file included from /usr/include/stdio.h:873, from src/libmpdclient.c:38: In function 'snprintf', inlined from 'mpd_connect_un' at src/libmpdclient.c:394:3, inlined from 'mpd_newConnection' at src/libmpdclient.c:430:9: /usr/include/arm-linux-gnueabihf/bits/stdio2.h:67:10: warning: '__builtin___snprintf_chk' specified bound 50000 exceeds destination size 1001 [-Wstringop-overflow=] return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ __bos (__s), __fmt, __va_arg_pack ()); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ g++ -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/pms-0.42=. -fstack-protector-strong -Wformat -Werror=format-security -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -DLOCALE_DIR=\""/usr/share/locale"\" -c -o field.o `test -f 'src/field.cpp' || echo './'`src/field.cpp g++ -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/pms-0.42=. -fstack-protector-strong -Wformat -Werror=format-security -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -DLOCALE_DIR=\""/usr/share/locale"\" -c -o settings.o `test -f 'src/settings.cpp' || echo './'`src/settings.cpp g++ -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/pms-0.42=. -fstack-protector-strong -Wformat -Werror=format-security -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -DLOCALE_DIR=\""/usr/share/locale"\" -c -o mediator.o `test -f 'src/mediator.cpp' || echo './'`src/mediator.cpp g++ -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/pms-0.42=. -fstack-protector-strong -Wformat -Werror=format-security -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -DLOCALE_DIR=\""/usr/share/locale"\" -c -o message.o `test -f 'src/message.cpp' || echo './'`src/message.cpp g++ -g -O2 -ffile-prefix-map=/build/pms-0.42=. -fstack-protector-strong -Wformat -Werror=format-security -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -DLOCALE_DIR=\""/usr/share/locale"\" -Wl,-z,relro -o pms action.o color.o command.o config.o conn.o display.o input.o list.o pms.o song.o libmpdclient.o field.o settings.o mediator.o message.o -lglib-2.0 -lncursesw make[2]: Leaving directory '/build/pms-0.42' make[1]: Leaving directory '/build/pms-0.42' dh_auto_test make -j1 check VERBOSE=1 make[1]: Entering directory '/build/pms-0.42' make[1]: Leaving directory '/build/pms-0.42' fakeroot debian/rules binary dh binary dh_testroot dh_prep dh_auto_install make -j1 install DESTDIR=/build/pms-0.42/debian/pms AM_UPDATE_INFO_DIR=no make[1]: Entering directory '/build/pms-0.42' make[2]: Entering directory '/build/pms-0.42' test -z "/usr/bin" || /bin/mkdir -p "/build/pms-0.42/debian/pms/usr/bin" /usr/bin/install -c pms '/build/pms-0.42/debian/pms/usr/bin' test -z "/usr/share/man/man1" || /bin/mkdir -p "/build/pms-0.42/debian/pms/usr/share/man/man1" /usr/bin/install -c -m 644 pms.1 '/build/pms-0.42/debian/pms/usr/share/man/man1' make[2]: Leaving directory '/build/pms-0.42' make[1]: Leaving directory '/build/pms-0.42' dh_installdocs dh_installchangelogs dh_installman dh_installmenu dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_strip dh_makeshlibs dh_shlibdeps dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'pms-dbgsym' in '../pms-dbgsym_0.42-1_armhf.deb'. dpkg-deb: building package 'pms' in '../pms_0.42-1_armhf.deb'. dpkg-genbuildinfo --build=binary dpkg-genchanges --build=binary >../pms_0.42-1_armhf.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/30406 and its subdirectories I: Current time: Sat Aug 8 19:25:50 -12 2020 I: pbuilder-time-stamp: 1596957950 Sun Aug 9 07:26:08 UTC 2020 I: 1st build successful. Starting 2nd build on remote node cbxi4b-armhf-rb.debian.net. Sun Aug 9 07:26:08 UTC 2020 I: Preparing to do remote build '2' on cbxi4b-armhf-rb.debian.net. Sun Aug 9 07:37:27 UTC 2020 I: Deleting $TMPDIR on cbxi4b-armhf-rb.debian.net. Sun Aug 9 07:37:29 UTC 2020 I: pms_0.42-1_armhf.changes: Format: 1.8 Date: Sun, 10 Aug 2013 11:45:20 -0430 Source: pms Binary: pms pms-dbgsym Architecture: armhf Version: 0.42-1 Distribution: unstable Urgency: low Maintainer: Alejandro Garrido Mota Changed-By: Alejandro Garrido Mota Description: pms - Practical Music Search, an MPD client Closes: 551619 612192 615003 Changes: pms (0.42-1) unstable; urgency=low . * New upstream release (Closes: #612192). * Update d/copyright to copyright-format 1.0. * Add source format 3.0 * d/control: - Push Standards-Version to 3.9.4 - Add libncursesw5-dev and libncurses5-dev (both) (Closes: #551619). * d/compat: Switch to compat 9 * mpd is not dependency of pms. It's in Recommends (Closes: #615003). Checksums-Sha1: 20fc1f9017f1541d73ba4cc9197759b1133fc1c5 2061520 pms-dbgsym_0.42-1_armhf.deb 0f4ba9754c0b486faab0eb764805d8a524efe26d 6255 pms_0.42-1_armhf.buildinfo 441cfc476cf772eb86ce6b9779a5861029137537 117624 pms_0.42-1_armhf.deb Checksums-Sha256: e49d695a31beaed04086f6935bc3b90b7c1a2bab3691e5a4ef86754155cac129 2061520 pms-dbgsym_0.42-1_armhf.deb 25ae20714c8583e85e40bcf57e419e967c323b645458d11bb586d5e882e14273 6255 pms_0.42-1_armhf.buildinfo f316c68538a43f83f3eebb62105bfa148e6e2382bcdedc1c10247b8ce1d075af 117624 pms_0.42-1_armhf.deb Files: df4f590d9a839cb6b9e17b5d28e2afd0 2061520 debug optional pms-dbgsym_0.42-1_armhf.deb eacccb03d48f4db47f6ff4a338235b2b 6255 sound extra pms_0.42-1_armhf.buildinfo 73c19226ee8f2ce2be0068ef466f6b1c 117624 sound extra pms_0.42-1_armhf.deb Sun Aug 9 07:37:30 UTC 2020 I: diffoscope 155 will be used to compare the two builds: # Profiling output for: /usr/bin/diffoscope --html /srv/reproducible-results/rbuild-debian/tmp.m0gHHUfHAS/pms_0.42-1.diffoscope.html --text /srv/reproducible-results/rbuild-debian/tmp.m0gHHUfHAS/pms_0.42-1.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/tmp.m0gHHUfHAS/pms_0.42-1.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/tmp.m0gHHUfHAS/b1/pms_0.42-1_armhf.changes /srv/reproducible-results/rbuild-debian/tmp.m0gHHUfHAS/b2/pms_0.42-1_armhf.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.252s) 0.252s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.055s) 0.055s 10 calls diffoscope.comparators.binary.FilesystemFile 0.000s 8 calls abc.DotChangesFile Sun Aug 9 07:37:31 UTC 2020 I: diffoscope 155 found no differences in the changes files, and a .buildinfo file also exists. Sun Aug 9 07:37:31 UTC 2020 I: pms from buster built successfully and reproducibly on armhf. Sun Aug 9 07:37:33 UTC 2020 I: Submitting .buildinfo files to external archives: Sun Aug 9 07:37:33 UTC 2020 I: Submitting 8.0K b1/pms_0.42-1_armhf.buildinfo.asc Sun Aug 9 07:37:34 UTC 2020 I: Submitting 8.0K b2/pms_0.42-1_armhf.buildinfo.asc Sun Aug 9 07:37:35 UTC 2020 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Sun Aug 9 07:37:35 UTC 2020 I: Done submitting .buildinfo files. Sun Aug 9 07:37:35 UTC 2020 I: Removing signed pms_0.42-1_armhf.buildinfo.asc files: removed './b1/pms_0.42-1_armhf.buildinfo.asc' removed './b2/pms_0.42-1_armhf.buildinfo.asc'