Sat Jul 25 23:08:03 UTC 2020 I: starting to build partman-base/buster/armhf on jenkins on '2020-07-25 23:07' Sat Jul 25 23:08:03 UTC 2020 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/armhf_38/1286/console.log Sat Jul 25 23:08:03 UTC 2020 I: Downloading source for buster/partman-base=208 --2020-07-25 23:08:03-- http://deb.debian.org/debian/pool/main/p/partman-base/partman-base_208.dsc Connecting to 78.137.99.97:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 1931 (1.9K) Saving to: ‘partman-base_208.dsc’ 0K . 100% 10.4M=0s 2020-07-25 23:08:03 (10.4 MB/s) - ‘partman-base_208.dsc’ saved [1931/1931] Sat Jul 25 23:08:03 UTC 2020 I: partman-base_208.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Format: 3.0 (native) Source: partman-base Binary: partman-base, partman-utils Architecture: any Version: 208 Maintainer: Debian Install System Team Uploaders: Anton Zinoviev , Colin Watson , Christian Perrier , Max Vozeler , Steve McIntyre <93sam@debian.org> Vcs-Browser: https://salsa.debian.org/installer-team/partman-base Vcs-Git: https://salsa.debian.org/installer-team/partman-base.git Build-Depends: debhelper (>= 9), dh-autoreconf, dh-di (>= 2), pkg-config, po-debconf (>= 0.5.0), libparted-dev (>= 2.2) Package-List: partman-base udeb debian-installer standard arch=any partman-utils udeb debian-installer optional arch=any Checksums-Sha1: e097e7351b07fc99b106f1898a7931192e187a62 174592 partman-base_208.tar.xz Checksums-Sha256: fc7e112ac239b921997dd86805f2b49fe1fedf837b3ebc010d795b5c28f1e2a1 174592 partman-base_208.tar.xz Files: 794b4b046fc5e5c4be53da4b5f65e861 174592 partman-base_208.tar.xz -----BEGIN PGP SIGNATURE----- iQJJBAEBCAAzFiEESWrG6BRCSzSFCDUpWfGHyhVusHYFAlyWBaUVHGh3YW5zaW5n QG1haWxib3gub3JnAAoJEFnxh8oVbrB2Vv8QAKd1r+ySl5X39rEABo5vkMQaqQTy iDt1MzaCQvrQPPVl/sWCb7clkL4llKkIYboHp34EykqiuK2Vx+0zSm8u6+kdweEU 1oW6SkyOyW4jGNU+gJ8ktJxwvqRO8Yhwovu5XHbgR+bnEjksUuToUjtTvG8JTe1Y xtuVoOo54V5JoChcOO6Iz62IwNNSed0wi95bqQPHwV7KbwuRpVHQKwikxh8i8XBK /bRc+UmJiFdnLddDK+LLrKIS2F3AY+uSMeC4dhnVfNpMpa/6CkocVbH6QtZ3Up3W PYnQd7lMakUpS0e9IPcBvSoO3uqM4LyImoeCaWnPxZ/GsernFVkQullniOY6IgI5 tSuJQhI/VesNepkru7hdPivnEDTkz5fXtu2r16SkAEtylkzgOAtXaIxBt10JMNYY 3f1aUFNg8dAHH2Hl0lEENP6Os4jL9T3Q4H3/CEe5Zqui8pv9j93qm2jY1S5wfXbz ZyP7riC8VQ7yQr0nI9bQSqT4qHf6+iD2BqjceG+/S94qEwXjy0z8JpvwlJlxl1bY x+3zOXEYVWKgI2vNenD52l2PHVdufzIUPHPa//tg0hwvelR6dHWGP0cwJNJETHCF GrbH64u2ntC+4H7A4zjhiNcQo60QCQhb3XMZBDjBIAJc6TzcVyLxwhX7FvMvcGMe EWLFs3nPNvixrhYQ =LGk0 -----END PGP SIGNATURE----- Sat Jul 25 23:08:03 UTC 2020 I: Checking whether the package is not for us Sat Jul 25 23:08:03 UTC 2020 I: Starting 1st build on remote node wbq0-armhf-rb.debian.net. Sat Jul 25 23:08:03 UTC 2020 I: Preparing to do remote build '1' on wbq0-armhf-rb.debian.net. Sat Jul 25 23:11:30 UTC 2020 I: Deleting $TMPDIR on wbq0-armhf-rb.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Sat Jul 25 11:08:13 -12 2020 I: pbuilder-time-stamp: 1595718493 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/buster-reproducible-base.tgz] I: copying local configuration I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [partman-base_208.dsc] I: copying [./partman-base_208.tar.xz] I: Extracting source gpgv: unknown type of key resource 'trustedkeys.kbx' gpgv: keyblock resource '/root/.gnupg/trustedkeys.kbx': General error gpgv: Signature made Fri Mar 22 22:08:37 2019 -12 gpgv: using RSA key 496AC6E814424B348508352959F187CA156EB076 gpgv: issuer "hwansing@mailbox.org" gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./partman-base_208.dsc dpkg-source: info: extracting partman-base in partman-base-208 dpkg-source: info: unpacking partman-base_208.tar.xz I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/12037/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='armhf' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=3' DISTRIBUTION='' HOME='/root' HOST_ARCH='armhf' IFS=' ' INVOCATION_ID='78dcfc450f964240bcb0448fda9f8d68' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='12037' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/tmp.2LRsLx1dU9/pbuilderrc_WXQG --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/buster-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/tmp.2LRsLx1dU9/b1 --logfile b1/build.log partman-base_208.dsc' SUDO_GID='115' SUDO_UID='111' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://10.0.0.15:8000/' I: uname -a Linux wbq0 4.19.0-9-armmp #1 SMP Debian 4.19.118-2+deb10u1 (2020-06-07) armv7l GNU/Linux I: ls -l /bin total 3328 -rwxr-xr-x 1 root root 767656 Apr 17 2019 bash -rwxr-xr-x 3 root root 26052 Jul 10 2019 bunzip2 -rwxr-xr-x 3 root root 26052 Jul 10 2019 bzcat lrwxrwxrwx 1 root root 6 Jul 10 2019 bzcmp -> bzdiff -rwxr-xr-x 1 root root 2227 Jul 10 2019 bzdiff lrwxrwxrwx 1 root root 6 Jul 10 2019 bzegrep -> bzgrep -rwxr-xr-x 1 root root 4877 Jun 24 2019 bzexe lrwxrwxrwx 1 root root 6 Jul 10 2019 bzfgrep -> bzgrep -rwxr-xr-x 1 root root 3641 Jul 10 2019 bzgrep -rwxr-xr-x 3 root root 26052 Jul 10 2019 bzip2 -rwxr-xr-x 1 root root 9636 Jul 10 2019 bzip2recover lrwxrwxrwx 1 root root 6 Jul 10 2019 bzless -> bzmore -rwxr-xr-x 1 root root 1297 Jul 10 2019 bzmore -rwxr-xr-x 1 root root 22432 Feb 28 2019 cat -rwxr-xr-x 1 root root 38868 Feb 28 2019 chgrp -rwxr-xr-x 1 root root 38836 Feb 28 2019 chmod -rwxr-xr-x 1 root root 42972 Feb 28 2019 chown -rwxr-xr-x 1 root root 88376 Feb 28 2019 cp -rwxr-xr-x 1 root root 75516 Jan 17 2019 dash -rwxr-xr-x 1 root root 71648 Feb 28 2019 date -rwxr-xr-x 1 root root 51212 Feb 28 2019 dd -rwxr-xr-x 1 root root 55672 Feb 28 2019 df -rwxr-xr-x 1 root root 88444 Feb 28 2019 dir -rwxr-xr-x 1 root root 54872 Jan 9 2019 dmesg lrwxrwxrwx 1 root root 8 Sep 26 2018 dnsdomainname -> hostname lrwxrwxrwx 1 root root 8 Sep 26 2018 domainname -> hostname -rwxr-xr-x 1 root root 22364 Feb 28 2019 echo -rwxr-xr-x 1 root root 28 Jan 7 2019 egrep -rwxr-xr-x 1 root root 18260 Feb 28 2019 false -rwxr-xr-x 1 root root 28 Jan 7 2019 fgrep -rwxr-xr-x 1 root root 47356 Jan 9 2019 findmnt -rwsr-xr-x 1 root root 21980 Apr 22 07:38 fusermount -rwxr-xr-x 1 root root 124508 Jan 7 2019 grep -rwxr-xr-x 2 root root 2345 Jan 5 2019 gunzip -rwxr-xr-x 1 root root 6375 Jan 5 2019 gzexe -rwxr-xr-x 1 root root 64232 Jan 5 2019 gzip -rwxr-xr-x 1 root root 13784 Sep 26 2018 hostname -rwxr-xr-x 1 root root 43044 Feb 28 2019 ln -rwxr-xr-x 1 root root 34932 Jul 26 2018 login -rwxr-xr-x 1 root root 88444 Feb 28 2019 ls -rwxr-xr-x 1 root root 67036 Jan 9 2019 lsblk -rwxr-xr-x 1 root root 47168 Feb 28 2019 mkdir -rwxr-xr-x 1 root root 43040 Feb 28 2019 mknod -rwxr-xr-x 1 root root 26552 Feb 28 2019 mktemp -rwxr-xr-x 1 root root 26024 Jan 9 2019 more -rwsr-xr-x 1 root root 34268 Jan 9 2019 mount -rwxr-xr-x 1 root root 9688 Jan 9 2019 mountpoint -rwxr-xr-x 1 root root 84284 Feb 28 2019 mv lrwxrwxrwx 1 root root 8 Sep 26 2018 nisdomainname -> hostname lrwxrwxrwx 1 root root 14 Feb 14 2019 pidof -> /sbin/killall5 -rwxr-xr-x 1 root root 22416 Feb 28 2019 pwd lrwxrwxrwx 1 root root 4 Apr 17 2019 rbash -> bash -rwxr-xr-x 1 root root 26504 Feb 28 2019 readlink -rwxr-xr-x 1 root root 42968 Feb 28 2019 rm -rwxr-xr-x 1 root root 26496 Feb 28 2019 rmdir -rwxr-xr-x 1 root root 14136 Jan 21 2019 run-parts -rwxr-xr-x 1 root root 76012 Dec 22 2018 sed lrwxrwxrwx 1 root root 4 Jul 23 20:27 sh -> dash -rwxr-xr-x 1 root root 22384 Feb 28 2019 sleep -rwxr-xr-x 1 root root 51124 Feb 28 2019 stty -rwsr-xr-x 1 root root 42472 Jan 9 2019 su -rwxr-xr-x 1 root root 22392 Feb 28 2019 sync -rwxr-xr-x 1 root root 283324 Apr 23 2019 tar -rwxr-xr-x 1 root root 9808 Jan 21 2019 tempfile -rwxr-xr-x 1 root root 63464 Feb 28 2019 touch -rwxr-xr-x 1 root root 18260 Feb 28 2019 true -rwxr-xr-x 1 root root 9636 Apr 22 07:38 ulockmgr_server -rwsr-xr-x 1 root root 21976 Jan 9 2019 umount -rwxr-xr-x 1 root root 22380 Feb 28 2019 uname -rwxr-xr-x 2 root root 2345 Jan 5 2019 uncompress -rwxr-xr-x 1 root root 88444 Feb 28 2019 vdir -rwxr-xr-x 1 root root 21980 Jan 9 2019 wdctl -rwxr-xr-x 1 root root 946 Jan 21 2019 which lrwxrwxrwx 1 root root 8 Sep 26 2018 ypdomainname -> hostname -rwxr-xr-x 1 root root 1983 Jan 5 2019 zcat -rwxr-xr-x 1 root root 1677 Jan 5 2019 zcmp -rwxr-xr-x 1 root root 5879 Jan 5 2019 zdiff -rwxr-xr-x 1 root root 29 Jan 5 2019 zegrep -rwxr-xr-x 1 root root 29 Jan 5 2019 zfgrep -rwxr-xr-x 1 root root 2080 Jan 5 2019 zforce -rwxr-xr-x 1 root root 7584 Jan 5 2019 zgrep -rwxr-xr-x 1 root root 2205 Jan 5 2019 zless -rwxr-xr-x 1 root root 1841 Jan 5 2019 zmore -rwxr-xr-x 1 root root 4552 Jan 5 2019 znew I: user script /srv/workspace/pbuilder/12037/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: armhf Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper (>= 9), dh-autoreconf, dh-di (>= 2), pkg-config, po-debconf (>= 0.5.0), libparted-dev (>= 2.2) dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 18932 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper (>= 9); however: Package debhelper is not installed. pbuilder-satisfydepends-dummy depends on dh-autoreconf; however: Package dh-autoreconf is not installed. pbuilder-satisfydepends-dummy depends on dh-di (>= 2); however: Package dh-di is not installed. pbuilder-satisfydepends-dummy depends on pkg-config; however: Package pkg-config is not installed. pbuilder-satisfydepends-dummy depends on po-debconf (>= 0.5.0); however: Package po-debconf is not installed. pbuilder-satisfydepends-dummy depends on libparted-dev (>= 2.2); however: Package libparted-dev is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdmainutils{a} debhelper{a} dh-autoreconf{a} dh-di{a} dh-strip-nondeterminism{a} dmsetup{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libblkid-dev{a} libbsd0{a} libcroco3{a} libdevmapper-dev{a} libdevmapper-event1.02.1{a} libdevmapper1.02.1{a} libelf1{a} libfile-stripnondeterminism-perl{a} libglib2.0-0{a} libicu63{a} libmagic-mgc{a} libmagic1{a} libncurses6{a} libparted-dev{a} libparted-fs-resize0{a} libparted2{a} libpcre16-3{a} libpcre3-dev{a} libpcre32-3{a} libpcrecpp0v5{a} libpipeline1{a} libselinux1-dev{a} libsepol1-dev{a} libsigsegv2{a} libtool{a} libuchardet0{a} libudev-dev{a} libxml2{a} m4{a} man-db{a} pkg-config{a} po-debconf{a} sensible-utils{a} uuid-dev{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libglib2.0-data libgpm2 libltdl-dev libmail-sendmail-perl lynx shared-mime-info wget xdg-user-dirs 0 packages upgraded, 51 newly installed, 0 to remove and 0 not upgraded. Need to get 21.5 MB of archives. After unpacking 71.2 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian buster/main armhf libbsd0 armhf 0.9.1-2 [103 kB] Get: 2 http://deb.debian.org/debian buster/main armhf bsdmainutils armhf 11.1.2+b1 [186 kB] Get: 3 http://deb.debian.org/debian buster/main armhf libuchardet0 armhf 0.0.6-3 [62.2 kB] Get: 4 http://deb.debian.org/debian buster/main armhf groff-base armhf 1.22.4-3 [828 kB] Get: 5 http://deb.debian.org/debian buster/main armhf libpipeline1 armhf 1.5.1-2 [26.8 kB] Get: 6 http://deb.debian.org/debian buster/main armhf man-db armhf 2.8.5-2 [1240 kB] Get: 7 http://deb.debian.org/debian buster/main armhf sensible-utils all 0.0.12 [15.8 kB] Get: 8 http://deb.debian.org/debian buster/main armhf libmagic-mgc armhf 1:5.35-4+deb10u1 [242 kB] Get: 9 http://deb.debian.org/debian buster/main armhf libmagic1 armhf 1:5.35-4+deb10u1 [110 kB] Get: 10 http://deb.debian.org/debian buster/main armhf file armhf 1:5.35-4+deb10u1 [65.5 kB] Get: 11 http://deb.debian.org/debian buster/main armhf gettext-base armhf 0.19.8.1-9 [118 kB] Get: 12 http://deb.debian.org/debian buster/main armhf libsigsegv2 armhf 2.12-2 [32.1 kB] Get: 13 http://deb.debian.org/debian buster/main armhf m4 armhf 1.4.18-2 [190 kB] Get: 14 http://deb.debian.org/debian buster/main armhf autoconf all 2.69-11 [341 kB] Get: 15 http://deb.debian.org/debian buster/main armhf autotools-dev all 20180224.1 [77.0 kB] Get: 16 http://deb.debian.org/debian buster/main armhf automake all 1:1.16.1-4 [771 kB] Get: 17 http://deb.debian.org/debian buster/main armhf autopoint all 0.19.8.1-9 [434 kB] Get: 18 http://deb.debian.org/debian buster/main armhf libtool all 2.4.6-9 [547 kB] Get: 19 http://deb.debian.org/debian buster/main armhf dh-autoreconf all 19 [16.9 kB] Get: 20 http://deb.debian.org/debian buster/main armhf libarchive-zip-perl all 1.64-1 [96.8 kB] Get: 21 http://deb.debian.org/debian buster/main armhf libfile-stripnondeterminism-perl all 1.1.2-1 [19.8 kB] Get: 22 http://deb.debian.org/debian buster/main armhf dh-strip-nondeterminism all 1.1.2-1 [13.0 kB] Get: 23 http://deb.debian.org/debian buster/main armhf libelf1 armhf 0.176-1.1 [158 kB] Get: 24 http://deb.debian.org/debian buster/main armhf dwz armhf 0.12-3 [72.0 kB] Get: 25 http://deb.debian.org/debian buster/main armhf libglib2.0-0 armhf 2.58.3-2+deb10u2 [1101 kB] Get: 26 http://deb.debian.org/debian buster/main armhf libicu63 armhf 63.1-6+deb10u1 [8005 kB] Get: 27 http://deb.debian.org/debian buster/main armhf libxml2 armhf 2.9.4+dfsg1-7+b3 [595 kB] Get: 28 http://deb.debian.org/debian buster/main armhf libcroco3 armhf 0.6.12-3 [133 kB] Get: 29 http://deb.debian.org/debian buster/main armhf libncurses6 armhf 6.1+20181013-2+deb10u2 [79.8 kB] Get: 30 http://deb.debian.org/debian buster/main armhf gettext armhf 0.19.8.1-9 [1242 kB] Get: 31 http://deb.debian.org/debian buster/main armhf intltool-debian all 0.35.0+20060710.5 [26.8 kB] Get: 32 http://deb.debian.org/debian buster/main armhf po-debconf all 1.0.21 [248 kB] Get: 33 http://deb.debian.org/debian buster/main armhf debhelper all 12.1.1 [1016 kB] Get: 34 http://deb.debian.org/debian buster/main armhf dh-di all 9 [11.6 kB] Get: 35 http://deb.debian.org/debian buster/main armhf libdevmapper1.02.1 armhf 2:1.02.155-3 [131 kB] Get: 36 http://deb.debian.org/debian buster/main armhf dmsetup armhf 2:1.02.155-3 [90.0 kB] Get: 37 http://deb.debian.org/debian buster/main armhf uuid-dev armhf 2.33.1-0.1 [92.6 kB] Get: 38 http://deb.debian.org/debian buster/main armhf libblkid-dev armhf 2.33.1-0.1 [217 kB] Get: 39 http://deb.debian.org/debian buster/main armhf libdevmapper-event1.02.1 armhf 2:1.02.155-3 [21.4 kB] Get: 40 http://deb.debian.org/debian buster/main armhf libudev-dev armhf 241-7~deb10u4 [110 kB] Get: 41 http://deb.debian.org/debian buster/main armhf libsepol1-dev armhf 2.8-1 [318 kB] Get: 42 http://deb.debian.org/debian buster/main armhf libpcre16-3 armhf 2:8.39-12 [238 kB] Get: 43 http://deb.debian.org/debian buster/main armhf libpcre32-3 armhf 2:8.39-12 [231 kB] Get: 44 http://deb.debian.org/debian buster/main armhf libpcrecpp0v5 armhf 2:8.39-12 [150 kB] Get: 45 http://deb.debian.org/debian buster/main armhf libpcre3-dev armhf 2:8.39-12 [585 kB] Get: 46 http://deb.debian.org/debian buster/main armhf libselinux1-dev armhf 2.8-1+b1 [162 kB] Get: 47 http://deb.debian.org/debian buster/main armhf libdevmapper-dev armhf 2:1.02.155-3 [51.5 kB] Get: 48 http://deb.debian.org/debian buster/main armhf libparted2 armhf 3.2-25 [267 kB] Get: 49 http://deb.debian.org/debian buster/main armhf libparted-fs-resize0 armhf 3.2-25 [197 kB] Get: 50 http://deb.debian.org/debian buster/main armhf libparted-dev armhf 3.2-25 [338 kB] Get: 51 http://deb.debian.org/debian buster/main armhf pkg-config armhf 0.29-6 [60.7 kB] Fetched 21.5 MB in 2s (9034 kB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package libbsd0:armhf. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 18932 files and directories currently installed.) Preparing to unpack .../00-libbsd0_0.9.1-2_armhf.deb ... Unpacking libbsd0:armhf (0.9.1-2) ... Selecting previously unselected package bsdmainutils. Preparing to unpack .../01-bsdmainutils_11.1.2+b1_armhf.deb ... Unpacking bsdmainutils (11.1.2+b1) ... Selecting previously unselected package libuchardet0:armhf. Preparing to unpack .../02-libuchardet0_0.0.6-3_armhf.deb ... Unpacking libuchardet0:armhf (0.0.6-3) ... Selecting previously unselected package groff-base. Preparing to unpack .../03-groff-base_1.22.4-3_armhf.deb ... Unpacking groff-base (1.22.4-3) ... Selecting previously unselected package libpipeline1:armhf. Preparing to unpack .../04-libpipeline1_1.5.1-2_armhf.deb ... Unpacking libpipeline1:armhf (1.5.1-2) ... Selecting previously unselected package man-db. Preparing to unpack .../05-man-db_2.8.5-2_armhf.deb ... Unpacking man-db (2.8.5-2) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../06-sensible-utils_0.0.12_all.deb ... Unpacking sensible-utils (0.0.12) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../07-libmagic-mgc_1%3a5.35-4+deb10u1_armhf.deb ... Unpacking libmagic-mgc (1:5.35-4+deb10u1) ... Selecting previously unselected package libmagic1:armhf. Preparing to unpack .../08-libmagic1_1%3a5.35-4+deb10u1_armhf.deb ... Unpacking libmagic1:armhf (1:5.35-4+deb10u1) ... Selecting previously unselected package file. Preparing to unpack .../09-file_1%3a5.35-4+deb10u1_armhf.deb ... Unpacking file (1:5.35-4+deb10u1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../10-gettext-base_0.19.8.1-9_armhf.deb ... Unpacking gettext-base (0.19.8.1-9) ... Selecting previously unselected package libsigsegv2:armhf. Preparing to unpack .../11-libsigsegv2_2.12-2_armhf.deb ... Unpacking libsigsegv2:armhf (2.12-2) ... Selecting previously unselected package m4. Preparing to unpack .../12-m4_1.4.18-2_armhf.deb ... Unpacking m4 (1.4.18-2) ... Selecting previously unselected package autoconf. Preparing to unpack .../13-autoconf_2.69-11_all.deb ... Unpacking autoconf (2.69-11) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../14-autotools-dev_20180224.1_all.deb ... Unpacking autotools-dev (20180224.1) ... Selecting previously unselected package automake. Preparing to unpack .../15-automake_1%3a1.16.1-4_all.deb ... Unpacking automake (1:1.16.1-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../16-autopoint_0.19.8.1-9_all.deb ... Unpacking autopoint (0.19.8.1-9) ... Selecting previously unselected package libtool. Preparing to unpack .../17-libtool_2.4.6-9_all.deb ... Unpacking libtool (2.4.6-9) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../18-dh-autoreconf_19_all.deb ... Unpacking dh-autoreconf (19) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../19-libarchive-zip-perl_1.64-1_all.deb ... Unpacking libarchive-zip-perl (1.64-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../20-libfile-stripnondeterminism-perl_1.1.2-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.1.2-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../21-dh-strip-nondeterminism_1.1.2-1_all.deb ... Unpacking dh-strip-nondeterminism (1.1.2-1) ... Selecting previously unselected package libelf1:armhf. Preparing to unpack .../22-libelf1_0.176-1.1_armhf.deb ... Unpacking libelf1:armhf (0.176-1.1) ... Selecting previously unselected package dwz. Preparing to unpack .../23-dwz_0.12-3_armhf.deb ... Unpacking dwz (0.12-3) ... Selecting previously unselected package libglib2.0-0:armhf. Preparing to unpack .../24-libglib2.0-0_2.58.3-2+deb10u2_armhf.deb ... Unpacking libglib2.0-0:armhf (2.58.3-2+deb10u2) ... Selecting previously unselected package libicu63:armhf. Preparing to unpack .../25-libicu63_63.1-6+deb10u1_armhf.deb ... Unpacking libicu63:armhf (63.1-6+deb10u1) ... Selecting previously unselected package libxml2:armhf. Preparing to unpack .../26-libxml2_2.9.4+dfsg1-7+b3_armhf.deb ... Unpacking libxml2:armhf (2.9.4+dfsg1-7+b3) ... Selecting previously unselected package libcroco3:armhf. Preparing to unpack .../27-libcroco3_0.6.12-3_armhf.deb ... Unpacking libcroco3:armhf (0.6.12-3) ... Selecting previously unselected package libncurses6:armhf. Preparing to unpack .../28-libncurses6_6.1+20181013-2+deb10u2_armhf.deb ... Unpacking libncurses6:armhf (6.1+20181013-2+deb10u2) ... Selecting previously unselected package gettext. Preparing to unpack .../29-gettext_0.19.8.1-9_armhf.deb ... Unpacking gettext (0.19.8.1-9) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../30-intltool-debian_0.35.0+20060710.5_all.deb ... Unpacking intltool-debian (0.35.0+20060710.5) ... Selecting previously unselected package po-debconf. Preparing to unpack .../31-po-debconf_1.0.21_all.deb ... Unpacking po-debconf (1.0.21) ... Selecting previously unselected package debhelper. Preparing to unpack .../32-debhelper_12.1.1_all.deb ... Unpacking debhelper (12.1.1) ... Selecting previously unselected package dh-di. Preparing to unpack .../33-dh-di_9_all.deb ... Unpacking dh-di (9) ... Selecting previously unselected package libdevmapper1.02.1:armhf. Preparing to unpack .../34-libdevmapper1.02.1_2%3a1.02.155-3_armhf.deb ... Unpacking libdevmapper1.02.1:armhf (2:1.02.155-3) ... Selecting previously unselected package dmsetup. Preparing to unpack .../35-dmsetup_2%3a1.02.155-3_armhf.deb ... Unpacking dmsetup (2:1.02.155-3) ... Selecting previously unselected package uuid-dev:armhf. Preparing to unpack .../36-uuid-dev_2.33.1-0.1_armhf.deb ... Unpacking uuid-dev:armhf (2.33.1-0.1) ... Selecting previously unselected package libblkid-dev:armhf. Preparing to unpack .../37-libblkid-dev_2.33.1-0.1_armhf.deb ... Unpacking libblkid-dev:armhf (2.33.1-0.1) ... Selecting previously unselected package libdevmapper-event1.02.1:armhf. Preparing to unpack .../38-libdevmapper-event1.02.1_2%3a1.02.155-3_armhf.deb ... Unpacking libdevmapper-event1.02.1:armhf (2:1.02.155-3) ... Selecting previously unselected package libudev-dev:armhf. Preparing to unpack .../39-libudev-dev_241-7~deb10u4_armhf.deb ... Unpacking libudev-dev:armhf (241-7~deb10u4) ... Selecting previously unselected package libsepol1-dev:armhf. Preparing to unpack .../40-libsepol1-dev_2.8-1_armhf.deb ... Unpacking libsepol1-dev:armhf (2.8-1) ... Selecting previously unselected package libpcre16-3:armhf. Preparing to unpack .../41-libpcre16-3_2%3a8.39-12_armhf.deb ... Unpacking libpcre16-3:armhf (2:8.39-12) ... Selecting previously unselected package libpcre32-3:armhf. Preparing to unpack .../42-libpcre32-3_2%3a8.39-12_armhf.deb ... Unpacking libpcre32-3:armhf (2:8.39-12) ... Selecting previously unselected package libpcrecpp0v5:armhf. Preparing to unpack .../43-libpcrecpp0v5_2%3a8.39-12_armhf.deb ... Unpacking libpcrecpp0v5:armhf (2:8.39-12) ... Selecting previously unselected package libpcre3-dev:armhf. Preparing to unpack .../44-libpcre3-dev_2%3a8.39-12_armhf.deb ... Unpacking libpcre3-dev:armhf (2:8.39-12) ... Selecting previously unselected package libselinux1-dev:armhf. Preparing to unpack .../45-libselinux1-dev_2.8-1+b1_armhf.deb ... Unpacking libselinux1-dev:armhf (2.8-1+b1) ... Selecting previously unselected package libdevmapper-dev:armhf. Preparing to unpack .../46-libdevmapper-dev_2%3a1.02.155-3_armhf.deb ... Unpacking libdevmapper-dev:armhf (2:1.02.155-3) ... Selecting previously unselected package libparted2:armhf. Preparing to unpack .../47-libparted2_3.2-25_armhf.deb ... Unpacking libparted2:armhf (3.2-25) ... Selecting previously unselected package libparted-fs-resize0:armhf. Preparing to unpack .../48-libparted-fs-resize0_3.2-25_armhf.deb ... Unpacking libparted-fs-resize0:armhf (3.2-25) ... Selecting previously unselected package libparted-dev:armhf. Preparing to unpack .../49-libparted-dev_3.2-25_armhf.deb ... Unpacking libparted-dev:armhf (3.2-25) ... Selecting previously unselected package pkg-config. Preparing to unpack .../50-pkg-config_0.29-6_armhf.deb ... Unpacking pkg-config (0.29-6) ... Setting up libpcrecpp0v5:armhf (2:8.39-12) ... Setting up libpipeline1:armhf (1.5.1-2) ... Setting up libpcre16-3:armhf (2:8.39-12) ... Setting up libmagic-mgc (1:5.35-4+deb10u1) ... Setting up libarchive-zip-perl (1.64-1) ... Setting up libglib2.0-0:armhf (2.58.3-2+deb10u2) ... No schema files found: doing nothing. Setting up dh-di (9) ... Setting up libmagic1:armhf (1:5.35-4+deb10u1) ... Setting up libsepol1-dev:armhf (2.8-1) ... Setting up gettext-base (0.19.8.1-9) ... Setting up file (1:5.35-4+deb10u1) ... Setting up libicu63:armhf (63.1-6+deb10u1) ... Setting up autotools-dev (20180224.1) ... Setting up uuid-dev:armhf (2.33.1-0.1) ... Setting up libncurses6:armhf (6.1+20181013-2+deb10u2) ... Setting up libsigsegv2:armhf (2.12-2) ... Setting up libpcre32-3:armhf (2:8.39-12) ... Setting up autopoint (0.19.8.1-9) ... Setting up pkg-config (0.29-6) ... Setting up libudev-dev:armhf (241-7~deb10u4) ... Setting up sensible-utils (0.0.12) ... Setting up libuchardet0:armhf (0.0.6-3) ... Setting up libbsd0:armhf (0.9.1-2) ... Setting up libelf1:armhf (0.176-1.1) ... Setting up libxml2:armhf (2.9.4+dfsg1-7+b3) ... Setting up libfile-stripnondeterminism-perl (1.1.2-1) ... Setting up libblkid-dev:armhf (2.33.1-0.1) ... Setting up libtool (2.4.6-9) ... Setting up libpcre3-dev:armhf (2:8.39-12) ... Setting up m4 (1.4.18-2) ... Setting up bsdmainutils (11.1.2+b1) ... update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode Setting up libcroco3:armhf (0.6.12-3) ... Setting up autoconf (2.69-11) ... Setting up dwz (0.12-3) ... Setting up groff-base (1.22.4-3) ... Setting up automake (1:1.16.1-4) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up gettext (0.19.8.1-9) ... Setting up libselinux1-dev:armhf (2.8-1+b1) ... Setting up man-db (2.8.5-2) ... Not building database; man-db/auto-update is not 'true'. Setting up intltool-debian (0.35.0+20060710.5) ... Setting up po-debconf (1.0.21) ... Setting up libdevmapper1.02.1:armhf (2:1.02.155-3) ... Setting up libparted2:armhf (3.2-25) ... Setting up libparted-fs-resize0:armhf (3.2-25) ... Setting up dmsetup (2:1.02.155-3) ... Setting up libdevmapper-event1.02.1:armhf (2:1.02.155-3) ... Setting up debhelper (12.1.1) ... Setting up dh-autoreconf (19) ... Setting up dh-strip-nondeterminism (1.1.2-1) ... Setting up libdevmapper-dev:armhf (2:1.02.155-3) ... Setting up libparted-dev:armhf (3.2-25) ... Processing triggers for libc-bin (2.28-10) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.23-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/partman-base-208/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b dpkg-buildpackage: info: source package partman-base dpkg-buildpackage: info: source version 208 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Holger Wansing dpkg-source --before-build . dpkg-buildpackage: info: host architecture armhf fakeroot debian/rules clean dh clean --with autoreconf,d-i dh_di_kernel_gencontrol dh_clean debian/rules build dh build --with autoreconf,d-i dh_di_kernel_gencontrol dh_update_autotools_config dh_autoreconf configure.ac:5: installing './compile' configure.ac:3: installing './install-sh' configure.ac:3: installing './missing' Makefile.am: installing './depcomp' debian/rules override_dh_auto_configure make[1]: Entering directory '/build/partman-base-208' dh_auto_configure -- --prefix=/ ./configure --build=arm-linux-gnueabihf --prefix=/usr --includedir=\${prefix}/include --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info --sysconfdir=/etc --localstatedir=/var --disable-silent-rules --libdir=\${prefix}/lib/arm-linux-gnueabihf --libexecdir=\${prefix}/lib/arm-linux-gnueabihf --disable-maintainer-mode --disable-dependency-tracking --prefix=/ configure: WARNING: unrecognized options: --disable-maintainer-mode checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports the include directive... yes (GNU style) checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking dependency style of gcc... none checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking minix/config.h usability... no checking minix/config.h presence... no checking for minix/config.h... no checking whether it is safe to define __EXTENSIONS__... yes checking for gcc... (cached) gcc checking whether we are using the GNU C compiler... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to accept ISO C89... (cached) none needed checking whether gcc understands -c and -o together... (cached) yes checking dependency style of gcc... (cached) none checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for libparted... yes checking for libparted >= 3.1... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating config.h config.status: executing depfiles commands configure: WARNING: unrecognized options: --disable-maintainer-mode make[1]: Leaving directory '/build/partman-base-208' dh_auto_build make -j1 make[1]: Entering directory '/build/partman-base-208' make all-am make[2]: Entering directory '/build/partman-base-208' gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/partman-base-208=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -Os -c -o parted_server.o parted_server.c parted_server.c: In function 'iscan_line': parted_server.c:151:21: warning: ignoring return value of 'fscanf', declared with attribute warn_unused_result [-Wunused-result] #define iscanf(...) fscanf(infifo,__VA_ARGS__) ^~~~~~~~~~~~~~~~~~~~~~~~~~ parted_server.c:186:17: note: in expansion of macro 'iscanf' iscanf("%m[^\n]", str); ^~~~~~ parted_server.c: In function 'write_pid_file': parted_server.c:2328:2: warning: ignoring return value of 'freopen', declared with attribute warn_unused_result [-Wunused-result] freopen(pidfile_name, "w", fd); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ gcc -g -O2 -ffile-prefix-map=/build/partman-base-208=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -Os -Wl,-z,relro -o parted_server parted_server.o -lparted-fs-resize -lparted gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/partman-base-208=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -Os -c -o parted_devices.o parted_devices.c gcc -g -O2 -ffile-prefix-map=/build/partman-base-208=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -Os -Wl,-z,relro -o parted_devices parted_devices.o -lparted gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/partman-base-208=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -Os -c -o partmap.o partmap.c gcc -g -O2 -ffile-prefix-map=/build/partman-base-208=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -Os -Wl,-z,relro -o partmap partmap.o -lparted make[2]: Leaving directory '/build/partman-base-208' make[1]: Leaving directory '/build/partman-base-208' dh_auto_test make -j1 check VERBOSE=1 make[1]: Entering directory '/build/partman-base-208' make check-local make[2]: Entering directory '/build/partman-base-208' cd test && ./conversions make[2]: Leaving directory '/build/partman-base-208' make[1]: Leaving directory '/build/partman-base-208' fakeroot debian/rules binary dh binary --with autoreconf,d-i dh_testroot dh_prep dh_auto_install make -j1 install DESTDIR=/build/partman-base-208/debian/tmp AM_UPDATE_INFO_DIR=no make[1]: Entering directory '/build/partman-base-208' make[2]: Entering directory '/build/partman-base-208' /bin/mkdir -p '/build/partman-base-208/debian/tmp//bin' /usr/bin/install -c parted_server parted_devices partmap '/build/partman-base-208/debian/tmp//bin' /bin/mkdir -p '/build/partman-base-208/debian/tmp//bin' /usr/bin/install -c partman partman-command '/build/partman-base-208/debian/tmp//bin' make[2]: Nothing to be done for 'install-data-am'. make[2]: Leaving directory '/build/partman-base-208' make[1]: Leaving directory '/build/partman-base-208' debian/rules override_dh_install make[1]: Entering directory '/build/partman-base-208' dh_install --fail-missing dh_install: Please use dh_missing --list-missing/--fail-missing instead dh_install: This feature will be removed in compat 12. make[1]: Leaving directory '/build/partman-base-208' dh_di_kernel_install dh_di_numbers Subroutine install_dir redefined at /usr/bin/dh_di_numbers line 66. dh_installdocs dh_installchangelogs debian/rules override_dh_installdebconf make[1]: Entering directory '/build/partman-base-208' dh_installdebconf WARNING: kn: spurious newline removed sed -i '/^Template: partman\/default_filesystem/,/^$/s/^Default: .*/Default: ext4/' \ debian/partman-base/DEBIAN/templates make[1]: Leaving directory '/build/partman-base-208' dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_strip dh_makeshlibs dh_shlibdeps dh_installdeb debian/rules override_dh_gencontrol make[1]: Entering directory '/build/partman-base-208' dh_gencontrol -- -Vmenuitemnum=4200 -Vprovides='made-filesystems, mounted-partitions, partitioned-harddrives, created-fstab' make[1]: Leaving directory '/build/partman-base-208' dh_md5sums dh_builddeb dpkg-deb: building package 'partman-base' in 'debian/.debhelper/scratch-space/build-partman-base/partman-base_208_armhf.deb'. dpkg-deb: building package 'partman-utils' in 'debian/.debhelper/scratch-space/build-partman-utils/partman-utils_208_armhf.deb'. Renaming partman-utils_208_armhf.deb to partman-utils_208_armhf.udeb Renaming partman-base_208_armhf.deb to partman-base_208_armhf.udeb dpkg-genbuildinfo --build=binary dpkg-genchanges --build=binary >../partman-base_208_armhf.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: source-only upload: Debian-native package I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/12037 and its subdirectories I: Current time: Sat Jul 25 11:11:23 -12 2020 I: pbuilder-time-stamp: 1595718683 Sat Jul 25 23:11:33 UTC 2020 I: 1st build successful. Starting 2nd build on remote node ff2b-armhf-rb.debian.net. Sat Jul 25 23:11:33 UTC 2020 I: Preparing to do remote build '2' on ff2b-armhf-rb.debian.net. Sat Jul 25 23:13:09 UTC 2020 I: Deleting $TMPDIR on ff2b-armhf-rb.debian.net. Sat Jul 25 23:13:11 UTC 2020 I: partman-base_208_armhf.changes: Format: 1.8 Date: Sat, 23 Mar 2019 10:52:07 +0100 Source: partman-base Binary: partman-base partman-utils Architecture: armhf Version: 208 Distribution: unstable Urgency: medium Maintainer: Debian Install System Team Changed-By: Holger Wansing Description: partman-base - Partition the storage devices (partman) (udeb) partman-utils - Utilities related to partitioning (udeb) Changes: partman-base (208) unstable; urgency=medium . * Team upload . [ Updated translations ] * Indonesian (id.po) by Muhammad Rifqi Priyo Susanto * Ukrainian (uk.po) by Anton Gladky Checksums-Sha1: cc24c23316ac71a35bb6dbeda467b92cf972f74a 5038 partman-base_208_armhf.buildinfo 367b218a7d2bddbfc7b19f64d05ad9af4e27bde4 128176 partman-base_208_armhf.udeb 7bf7e0423ea4f285fe6cd9175cebd662e1453f42 3096 partman-utils_208_armhf.udeb Checksums-Sha256: dd5b2f4c57164da3f251da6d51c96ac0be9efc1f8a75254225bc63740444b104 5038 partman-base_208_armhf.buildinfo 7a7a5497e44b6cc4b0e411d40d3d3192f3edbf692ecf106fe9ac643a0661968e 128176 partman-base_208_armhf.udeb c5db5c8d89f28fbfe42296dfa73988bd66d33c921f89890298192380ebb34ea9 3096 partman-utils_208_armhf.udeb Files: 6a19b89227a8903af4573f783cd164f0 5038 debian-installer standard partman-base_208_armhf.buildinfo 8e4a2b9d0a1dadd88ebb34ccf56aaaf0 128176 debian-installer standard partman-base_208_armhf.udeb f0c15e2d7d34945842ac191b55fc0153 3096 debian-installer optional partman-utils_208_armhf.udeb Sat Jul 25 23:13:12 UTC 2020 I: diffoscope 153 will be used to compare the two builds: # Profiling output for: /usr/bin/diffoscope --html /srv/reproducible-results/rbuild-debian/tmp.2LRsLx1dU9/partman-base_208.diffoscope.html --text /srv/reproducible-results/rbuild-debian/tmp.2LRsLx1dU9/partman-base_208.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/tmp.2LRsLx1dU9/partman-base_208.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/tmp.2LRsLx1dU9/b1/partman-base_208_armhf.changes /srv/reproducible-results/rbuild-debian/tmp.2LRsLx1dU9/b2/partman-base_208_armhf.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.340s) 0.340s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.024s) 0.024s 10 calls diffoscope.comparators.binary.FilesystemFile 0.000s 8 calls abc.DotChangesFile Sat Jul 25 23:16:03 UTC 2020 I: diffoscope 153 found no differences in the changes files, and a .buildinfo file also exists. Sat Jul 25 23:16:03 UTC 2020 I: partman-base from buster built successfully and reproducibly on armhf. Sat Jul 25 23:16:04 UTC 2020 I: Submitting .buildinfo files to external archives: Sat Jul 25 23:16:04 UTC 2020 I: Submitting 8.0K b1/partman-base_208_armhf.buildinfo.asc Sat Jul 25 23:16:05 UTC 2020 I: Submitting 8.0K b2/partman-base_208_armhf.buildinfo.asc Sat Jul 25 23:16:06 UTC 2020 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Sat Jul 25 23:16:06 UTC 2020 I: Done submitting .buildinfo files. Sat Jul 25 23:16:06 UTC 2020 I: Removing signed partman-base_208_armhf.buildinfo.asc files: removed './b1/partman-base_208_armhf.buildinfo.asc' removed './b2/partman-base_208_armhf.buildinfo.asc'