Tue May 19 10:15:43 UTC 2020 I: starting to build pam-dbus/buster/armhf on jenkins on '2020-05-19 10:15' Tue May 19 10:15:43 UTC 2020 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/armhf_6/1632/console.log Tue May 19 10:15:43 UTC 2020 I: Downloading source for buster/pam-dbus=0.2.1-3 --2020-05-19 10:15:43-- http://deb.debian.org/debian/pool/main/p/pam-dbus/pam-dbus_0.2.1-3.dsc Connecting to 78.137.99.97:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 1129 (1.1K) Saving to: ‘pam-dbus_0.2.1-3.dsc’ 0K . 100% 97.5M=0s 2020-05-19 10:15:43 (97.5 MB/s) - ‘pam-dbus_0.2.1-3.dsc’ saved [1129/1129] Tue May 19 10:15:43 UTC 2020 I: pam-dbus_0.2.1-3.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Format: 3.0 (quilt) Source: pam-dbus Binary: libpam-dbus, pam-dbus-notify Architecture: any all Version: 0.2.1-3 Maintainer: Joachim Breitner Standards-Version: 3.8.0 Build-Depends: debhelper (>> 7), libpam0g-dev (>= 0.72), dh-autoreconf, libdbus-glib-1-dev Package-List: libpam-dbus deb admin optional pam-dbus-notify deb admin optional Checksums-Sha1: e70f530d19a60e512fbb290188258f9b99bc1ba0 344618 pam-dbus_0.2.1.orig.tar.gz 1fb9c035a29ec87b1bf7c7d1cbdad25d740faef9 1904 pam-dbus_0.2.1-3.debian.tar.gz Checksums-Sha256: 2564549a62a0c1b9ba1430fb8824c261a4b8027fea043e2ac4d653aa79e35cdb 344618 pam-dbus_0.2.1.orig.tar.gz 0dafa7a32677c1f7fa273239dd8403900090bc702d48c519d82e4e142aef8c08 1904 pam-dbus_0.2.1-3.debian.tar.gz Files: 4c59e1b8d1f709f93299a0b852587730 344618 pam-dbus_0.2.1.orig.tar.gz 5761be107a46d830bc892beb643045b7 1904 pam-dbus_0.2.1-3.debian.tar.gz -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iEYEARECAAYFAlLVyjEACgkQ9ijrk0dDIGwg5gCfUUAEIyg04SE5okTyNns+kHup zwsAnRY/HGMxNRgDMes1lewjp/Xcb4B7 =Fcev -----END PGP SIGNATURE----- Tue May 19 10:15:43 UTC 2020 I: Checking whether the package is not for us Tue May 19 10:15:43 UTC 2020 I: Starting 1st build on remote node jtx1a-armhf-rb.debian.net. Tue May 19 10:15:43 UTC 2020 I: Preparing to do remote build '1' on jtx1a-armhf-rb.debian.net. Tue May 19 10:18:31 UTC 2020 I: Deleting $TMPDIR on jtx1a-armhf-rb.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Mon May 18 22:15:56 -12 2020 I: pbuilder-time-stamp: 1589883356 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/buster-reproducible-base.tgz] I: copying local configuration I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [pam-dbus_0.2.1-3.dsc] I: copying [./pam-dbus_0.2.1.orig.tar.gz] I: copying [./pam-dbus_0.2.1-3.debian.tar.gz] I: Extracting source gpgv: unknown type of key resource 'trustedkeys.kbx' gpgv: keyblock resource '/root/.gnupg/trustedkeys.kbx': General error gpgv: Signature made Tue Jan 14 11:37:21 2014 -12 gpgv: using DSA key F628EB934743206C gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./pam-dbus_0.2.1-3.dsc dpkg-source: info: extracting pam-dbus in pam-dbus-0.2.1 dpkg-source: info: unpacking pam-dbus_0.2.1.orig.tar.gz dpkg-source: info: unpacking pam-dbus_0.2.1-3.debian.tar.gz I: using fakeroot in build. I: Installing the build-deps -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: armhf Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper (>> 7), libpam0g-dev (>= 0.72), dh-autoreconf, libdbus-glib-1-dev dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 18932 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper (>> 7); however: Package debhelper is not installed. pbuilder-satisfydepends-dummy depends on libpam0g-dev (>= 0.72); however: Package libpam0g-dev is not installed. pbuilder-satisfydepends-dummy depends on dh-autoreconf; however: Package dh-autoreconf is not installed. pbuilder-satisfydepends-dummy depends on libdbus-glib-1-dev; however: Package libdbus-glib-1-dev is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdmainutils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libblkid-dev{a} libbsd0{a} libcroco3{a} libdbus-1-3{a} libdbus-1-dev{a} libdbus-glib-1-2{a} libdbus-glib-1-dev{a} libdbus-glib-1-dev-bin{a} libelf1{a} libexpat1{a} libffi-dev{a} libfile-stripnondeterminism-perl{a} libglib2.0-0{a} libglib2.0-bin{a} libglib2.0-data{a} libglib2.0-dev{a} libglib2.0-dev-bin{a} libicu63{a} libmagic-mgc{a} libmagic1{a} libmount-dev{a} libmpdec2{a} libncurses6{a} libpam0g-dev{a} libpcre16-3{a} libpcre3-dev{a} libpcre32-3{a} libpcrecpp0v5{a} libpipeline1{a} libpython3-stdlib{a} libpython3.7-minimal{a} libpython3.7-stdlib{a} libreadline7{a} libselinux1-dev{a} libsepol1-dev{a} libsigsegv2{a} libssl1.1{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} mime-support{a} pkg-config{a} po-debconf{a} python3{a} python3-distutils{a} python3-lib2to3{a} python3-minimal{a} python3.7{a} python3.7-minimal{a} readline-common{a} sensible-utils{a} uuid-dev{a} zlib1g-dev{a} The following packages are RECOMMENDED but will NOT be installed: curl dbus libarchive-cpio-perl libgpm2 libltdl-dev libmail-sendmail-perl lynx shared-mime-info wget xdg-user-dirs 0 packages upgraded, 70 newly installed, 0 to remove and 0 not upgraded. Need to get 30.5 MB of archives. After unpacking 112 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian buster/main armhf libbsd0 armhf 0.9.1-2 [103 kB] Get: 2 http://deb.debian.org/debian buster/main armhf bsdmainutils armhf 11.1.2+b1 [186 kB] Get: 3 http://deb.debian.org/debian buster/main armhf libuchardet0 armhf 0.0.6-3 [62.2 kB] Get: 4 http://deb.debian.org/debian buster/main armhf groff-base armhf 1.22.4-3 [828 kB] Get: 5 http://deb.debian.org/debian buster/main armhf libpipeline1 armhf 1.5.1-2 [26.8 kB] Get: 6 http://deb.debian.org/debian buster/main armhf man-db armhf 2.8.5-2 [1240 kB] Get: 7 http://deb.debian.org/debian buster/main armhf libssl1.1 armhf 1.1.1d-0+deb10u3 [1299 kB] Get: 8 http://deb.debian.org/debian buster/main armhf libpython3.7-minimal armhf 3.7.3-2+deb10u1 [582 kB] Get: 9 http://deb.debian.org/debian buster/main armhf libexpat1 armhf 2.2.6-2+deb10u1 [78.0 kB] Get: 10 http://deb.debian.org/debian buster/main armhf python3.7-minimal armhf 3.7.3-2+deb10u1 [1465 kB] Get: 11 http://deb.debian.org/debian buster/main armhf python3-minimal armhf 3.7.3-1 [36.6 kB] Get: 12 http://deb.debian.org/debian buster/main armhf mime-support all 3.62 [37.2 kB] Get: 13 http://deb.debian.org/debian buster/main armhf libmpdec2 armhf 2.4.2-2 [69.3 kB] Get: 14 http://deb.debian.org/debian buster/main armhf readline-common all 7.0-5 [70.6 kB] Get: 15 http://deb.debian.org/debian buster/main armhf libreadline7 armhf 7.0-5 [131 kB] Get: 16 http://deb.debian.org/debian buster/main armhf libpython3.7-stdlib armhf 3.7.3-2+deb10u1 [1660 kB] Get: 17 http://deb.debian.org/debian buster/main armhf python3.7 armhf 3.7.3-2+deb10u1 [330 kB] Get: 18 http://deb.debian.org/debian buster/main armhf libpython3-stdlib armhf 3.7.3-1 [20.0 kB] Get: 19 http://deb.debian.org/debian buster/main armhf python3 armhf 3.7.3-1 [61.5 kB] Get: 20 http://deb.debian.org/debian buster/main armhf sensible-utils all 0.0.12 [15.8 kB] Get: 21 http://deb.debian.org/debian buster/main armhf libmagic-mgc armhf 1:5.35-4+deb10u1 [242 kB] Get: 22 http://deb.debian.org/debian buster/main armhf libmagic1 armhf 1:5.35-4+deb10u1 [110 kB] Get: 23 http://deb.debian.org/debian buster/main armhf file armhf 1:5.35-4+deb10u1 [65.5 kB] Get: 24 http://deb.debian.org/debian buster/main armhf gettext-base armhf 0.19.8.1-9 [118 kB] Get: 25 http://deb.debian.org/debian buster/main armhf libsigsegv2 armhf 2.12-2 [32.1 kB] Get: 26 http://deb.debian.org/debian buster/main armhf m4 armhf 1.4.18-2 [190 kB] Get: 27 http://deb.debian.org/debian buster/main armhf autoconf all 2.69-11 [341 kB] Get: 28 http://deb.debian.org/debian buster/main armhf autotools-dev all 20180224.1 [77.0 kB] Get: 29 http://deb.debian.org/debian buster/main armhf automake all 1:1.16.1-4 [771 kB] Get: 30 http://deb.debian.org/debian buster/main armhf autopoint all 0.19.8.1-9 [434 kB] Get: 31 http://deb.debian.org/debian buster/main armhf libtool all 2.4.6-9 [547 kB] Get: 32 http://deb.debian.org/debian buster/main armhf dh-autoreconf all 19 [16.9 kB] Get: 33 http://deb.debian.org/debian buster/main armhf libarchive-zip-perl all 1.64-1 [96.8 kB] Get: 34 http://deb.debian.org/debian buster/main armhf libfile-stripnondeterminism-perl all 1.1.2-1 [19.8 kB] Get: 35 http://deb.debian.org/debian buster/main armhf dh-strip-nondeterminism all 1.1.2-1 [13.0 kB] Get: 36 http://deb.debian.org/debian buster/main armhf libelf1 armhf 0.176-1.1 [158 kB] Get: 37 http://deb.debian.org/debian buster/main armhf dwz armhf 0.12-3 [72.0 kB] Get: 38 http://deb.debian.org/debian buster/main armhf libglib2.0-0 armhf 2.58.3-2+deb10u2 [1101 kB] Get: 39 http://deb.debian.org/debian buster/main armhf libicu63 armhf 63.1-6+deb10u1 [8005 kB] Get: 40 http://deb.debian.org/debian buster/main armhf libxml2 armhf 2.9.4+dfsg1-7+b3 [595 kB] Get: 41 http://deb.debian.org/debian buster/main armhf libcroco3 armhf 0.6.12-3 [133 kB] Get: 42 http://deb.debian.org/debian buster/main armhf libncurses6 armhf 6.1+20181013-2+deb10u2 [79.8 kB] Get: 43 http://deb.debian.org/debian buster/main armhf gettext armhf 0.19.8.1-9 [1242 kB] Get: 44 http://deb.debian.org/debian buster/main armhf intltool-debian all 0.35.0+20060710.5 [26.8 kB] Get: 45 http://deb.debian.org/debian buster/main armhf po-debconf all 1.0.21 [248 kB] Get: 46 http://deb.debian.org/debian buster/main armhf debhelper all 12.1.1 [1016 kB] Get: 47 http://deb.debian.org/debian buster/main armhf uuid-dev armhf 2.33.1-0.1 [92.6 kB] Get: 48 http://deb.debian.org/debian buster/main armhf libblkid-dev armhf 2.33.1-0.1 [217 kB] Get: 49 http://deb.debian.org/debian buster/main armhf libdbus-1-3 armhf 1.12.16-1 [190 kB] Get: 50 http://deb.debian.org/debian buster/main armhf pkg-config armhf 0.29-6 [60.7 kB] Get: 51 http://deb.debian.org/debian buster/main armhf libdbus-1-dev armhf 1.12.16-1 [231 kB] Get: 52 http://deb.debian.org/debian buster/main armhf libdbus-glib-1-2 armhf 0.110-4 [61.1 kB] Get: 53 http://deb.debian.org/debian buster/main armhf libdbus-glib-1-dev-bin armhf 0.110-4 [47.5 kB] Get: 54 http://deb.debian.org/debian buster/main armhf libffi-dev armhf 3.2.1-9 [154 kB] Get: 55 http://deb.debian.org/debian buster/main armhf libglib2.0-data all 2.58.3-2+deb10u2 [1110 kB] Get: 56 http://deb.debian.org/debian buster/main armhf libglib2.0-bin armhf 2.58.3-2+deb10u2 [119 kB] Get: 57 http://deb.debian.org/debian buster/main armhf python3-lib2to3 all 3.7.3-1 [76.7 kB] Get: 58 http://deb.debian.org/debian buster/main armhf python3-distutils all 3.7.3-1 [142 kB] Get: 59 http://deb.debian.org/debian buster/main armhf libglib2.0-dev-bin armhf 2.58.3-2+deb10u2 [155 kB] Get: 60 http://deb.debian.org/debian buster/main armhf libmount-dev armhf 2.33.1-0.1 [223 kB] Get: 61 http://deb.debian.org/debian buster/main armhf libpcre16-3 armhf 2:8.39-12 [238 kB] Get: 62 http://deb.debian.org/debian buster/main armhf libpcre32-3 armhf 2:8.39-12 [231 kB] Get: 63 http://deb.debian.org/debian buster/main armhf libpcrecpp0v5 armhf 2:8.39-12 [150 kB] Get: 64 http://deb.debian.org/debian buster/main armhf libpcre3-dev armhf 2:8.39-12 [585 kB] Get: 65 http://deb.debian.org/debian buster/main armhf libsepol1-dev armhf 2.8-1 [318 kB] Get: 66 http://deb.debian.org/debian buster/main armhf libselinux1-dev armhf 2.8-1+b1 [162 kB] Get: 67 http://deb.debian.org/debian buster/main armhf zlib1g-dev armhf 1:1.2.11.dfsg-1 [207 kB] Get: 68 http://deb.debian.org/debian buster/main armhf libglib2.0-dev armhf 2.58.3-2+deb10u2 [1386 kB] Get: 69 http://deb.debian.org/debian buster/main armhf libdbus-glib-1-dev armhf 0.110-4 [75.1 kB] Get: 70 http://deb.debian.org/debian buster/main armhf libpam0g-dev armhf 1.3.1-5 [182 kB] Fetched 30.5 MB in 5s (5868 kB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package libbsd0:armhf. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 18932 files and directories currently installed.) Preparing to unpack .../0-libbsd0_0.9.1-2_armhf.deb ... Unpacking libbsd0:armhf (0.9.1-2) ... Selecting previously unselected package bsdmainutils. Preparing to unpack .../1-bsdmainutils_11.1.2+b1_armhf.deb ... Unpacking bsdmainutils (11.1.2+b1) ... Selecting previously unselected package libuchardet0:armhf. Preparing to unpack .../2-libuchardet0_0.0.6-3_armhf.deb ... Unpacking libuchardet0:armhf (0.0.6-3) ... Selecting previously unselected package groff-base. Preparing to unpack .../3-groff-base_1.22.4-3_armhf.deb ... Unpacking groff-base (1.22.4-3) ... Selecting previously unselected package libpipeline1:armhf. Preparing to unpack .../4-libpipeline1_1.5.1-2_armhf.deb ... Unpacking libpipeline1:armhf (1.5.1-2) ... Selecting previously unselected package man-db. Preparing to unpack .../5-man-db_2.8.5-2_armhf.deb ... Unpacking man-db (2.8.5-2) ... Selecting previously unselected package libssl1.1:armhf. Preparing to unpack .../6-libssl1.1_1.1.1d-0+deb10u3_armhf.deb ... Unpacking libssl1.1:armhf (1.1.1d-0+deb10u3) ... Selecting previously unselected package libpython3.7-minimal:armhf. Preparing to unpack .../7-libpython3.7-minimal_3.7.3-2+deb10u1_armhf.deb ... Unpacking libpython3.7-minimal:armhf (3.7.3-2+deb10u1) ... Selecting previously unselected package libexpat1:armhf. Preparing to unpack .../8-libexpat1_2.2.6-2+deb10u1_armhf.deb ... Unpacking libexpat1:armhf (2.2.6-2+deb10u1) ... Selecting previously unselected package python3.7-minimal. Preparing to unpack .../9-python3.7-minimal_3.7.3-2+deb10u1_armhf.deb ... Unpacking python3.7-minimal (3.7.3-2+deb10u1) ... Setting up libssl1.1:armhf (1.1.1d-0+deb10u3) ... Setting up libpython3.7-minimal:armhf (3.7.3-2+deb10u1) ... Setting up libexpat1:armhf (2.2.6-2+deb10u1) ... Setting up python3.7-minimal (3.7.3-2+deb10u1) ... Selecting previously unselected package python3-minimal. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19827 files and directories currently installed.) Preparing to unpack .../0-python3-minimal_3.7.3-1_armhf.deb ... Unpacking python3-minimal (3.7.3-1) ... Selecting previously unselected package mime-support. Preparing to unpack .../1-mime-support_3.62_all.deb ... Unpacking mime-support (3.62) ... Selecting previously unselected package libmpdec2:armhf. Preparing to unpack .../2-libmpdec2_2.4.2-2_armhf.deb ... Unpacking libmpdec2:armhf (2.4.2-2) ... Selecting previously unselected package readline-common. Preparing to unpack .../3-readline-common_7.0-5_all.deb ... Unpacking readline-common (7.0-5) ... Selecting previously unselected package libreadline7:armhf. Preparing to unpack .../4-libreadline7_7.0-5_armhf.deb ... Unpacking libreadline7:armhf (7.0-5) ... Selecting previously unselected package libpython3.7-stdlib:armhf. Preparing to unpack .../5-libpython3.7-stdlib_3.7.3-2+deb10u1_armhf.deb ... Unpacking libpython3.7-stdlib:armhf (3.7.3-2+deb10u1) ... Selecting previously unselected package python3.7. Preparing to unpack .../6-python3.7_3.7.3-2+deb10u1_armhf.deb ... Unpacking python3.7 (3.7.3-2+deb10u1) ... Selecting previously unselected package libpython3-stdlib:armhf. Preparing to unpack .../7-libpython3-stdlib_3.7.3-1_armhf.deb ... Unpacking libpython3-stdlib:armhf (3.7.3-1) ... Setting up python3-minimal (3.7.3-1) ... Selecting previously unselected package python3. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20288 files and directories currently installed.) Preparing to unpack .../00-python3_3.7.3-1_armhf.deb ... Unpacking python3 (3.7.3-1) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../01-sensible-utils_0.0.12_all.deb ... Unpacking sensible-utils (0.0.12) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../02-libmagic-mgc_1%3a5.35-4+deb10u1_armhf.deb ... Unpacking libmagic-mgc (1:5.35-4+deb10u1) ... Selecting previously unselected package libmagic1:armhf. Preparing to unpack .../03-libmagic1_1%3a5.35-4+deb10u1_armhf.deb ... Unpacking libmagic1:armhf (1:5.35-4+deb10u1) ... Selecting previously unselected package file. Preparing to unpack .../04-file_1%3a5.35-4+deb10u1_armhf.deb ... Unpacking file (1:5.35-4+deb10u1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../05-gettext-base_0.19.8.1-9_armhf.deb ... Unpacking gettext-base (0.19.8.1-9) ... Selecting previously unselected package libsigsegv2:armhf. Preparing to unpack .../06-libsigsegv2_2.12-2_armhf.deb ... Unpacking libsigsegv2:armhf (2.12-2) ... Selecting previously unselected package m4. Preparing to unpack .../07-m4_1.4.18-2_armhf.deb ... Unpacking m4 (1.4.18-2) ... Selecting previously unselected package autoconf. Preparing to unpack .../08-autoconf_2.69-11_all.deb ... Unpacking autoconf (2.69-11) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../09-autotools-dev_20180224.1_all.deb ... Unpacking autotools-dev (20180224.1) ... Selecting previously unselected package automake. Preparing to unpack .../10-automake_1%3a1.16.1-4_all.deb ... Unpacking automake (1:1.16.1-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../11-autopoint_0.19.8.1-9_all.deb ... Unpacking autopoint (0.19.8.1-9) ... Selecting previously unselected package libtool. Preparing to unpack .../12-libtool_2.4.6-9_all.deb ... Unpacking libtool (2.4.6-9) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../13-dh-autoreconf_19_all.deb ... Unpacking dh-autoreconf (19) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../14-libarchive-zip-perl_1.64-1_all.deb ... Unpacking libarchive-zip-perl (1.64-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../15-libfile-stripnondeterminism-perl_1.1.2-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.1.2-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../16-dh-strip-nondeterminism_1.1.2-1_all.deb ... Unpacking dh-strip-nondeterminism (1.1.2-1) ... Selecting previously unselected package libelf1:armhf. Preparing to unpack .../17-libelf1_0.176-1.1_armhf.deb ... Unpacking libelf1:armhf (0.176-1.1) ... Selecting previously unselected package dwz. Preparing to unpack .../18-dwz_0.12-3_armhf.deb ... Unpacking dwz (0.12-3) ... Selecting previously unselected package libglib2.0-0:armhf. Preparing to unpack .../19-libglib2.0-0_2.58.3-2+deb10u2_armhf.deb ... Unpacking libglib2.0-0:armhf (2.58.3-2+deb10u2) ... Selecting previously unselected package libicu63:armhf. Preparing to unpack .../20-libicu63_63.1-6+deb10u1_armhf.deb ... Unpacking libicu63:armhf (63.1-6+deb10u1) ... Selecting previously unselected package libxml2:armhf. Preparing to unpack .../21-libxml2_2.9.4+dfsg1-7+b3_armhf.deb ... Unpacking libxml2:armhf (2.9.4+dfsg1-7+b3) ... Selecting previously unselected package libcroco3:armhf. Preparing to unpack .../22-libcroco3_0.6.12-3_armhf.deb ... Unpacking libcroco3:armhf (0.6.12-3) ... Selecting previously unselected package libncurses6:armhf. Preparing to unpack .../23-libncurses6_6.1+20181013-2+deb10u2_armhf.deb ... Unpacking libncurses6:armhf (6.1+20181013-2+deb10u2) ... Selecting previously unselected package gettext. Preparing to unpack .../24-gettext_0.19.8.1-9_armhf.deb ... Unpacking gettext (0.19.8.1-9) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../25-intltool-debian_0.35.0+20060710.5_all.deb ... Unpacking intltool-debian (0.35.0+20060710.5) ... Selecting previously unselected package po-debconf. Preparing to unpack .../26-po-debconf_1.0.21_all.deb ... Unpacking po-debconf (1.0.21) ... Selecting previously unselected package debhelper. Preparing to unpack .../27-debhelper_12.1.1_all.deb ... Unpacking debhelper (12.1.1) ... Selecting previously unselected package uuid-dev:armhf. Preparing to unpack .../28-uuid-dev_2.33.1-0.1_armhf.deb ... Unpacking uuid-dev:armhf (2.33.1-0.1) ... Selecting previously unselected package libblkid-dev:armhf. Preparing to unpack .../29-libblkid-dev_2.33.1-0.1_armhf.deb ... Unpacking libblkid-dev:armhf (2.33.1-0.1) ... Selecting previously unselected package libdbus-1-3:armhf. Preparing to unpack .../30-libdbus-1-3_1.12.16-1_armhf.deb ... Unpacking libdbus-1-3:armhf (1.12.16-1) ... Selecting previously unselected package pkg-config. Preparing to unpack .../31-pkg-config_0.29-6_armhf.deb ... Unpacking pkg-config (0.29-6) ... Selecting previously unselected package libdbus-1-dev:armhf. Preparing to unpack .../32-libdbus-1-dev_1.12.16-1_armhf.deb ... Unpacking libdbus-1-dev:armhf (1.12.16-1) ... Selecting previously unselected package libdbus-glib-1-2:armhf. Preparing to unpack .../33-libdbus-glib-1-2_0.110-4_armhf.deb ... Unpacking libdbus-glib-1-2:armhf (0.110-4) ... Selecting previously unselected package libdbus-glib-1-dev-bin. Preparing to unpack .../34-libdbus-glib-1-dev-bin_0.110-4_armhf.deb ... Unpacking libdbus-glib-1-dev-bin (0.110-4) ... Selecting previously unselected package libffi-dev:armhf. Preparing to unpack .../35-libffi-dev_3.2.1-9_armhf.deb ... Unpacking libffi-dev:armhf (3.2.1-9) ... Selecting previously unselected package libglib2.0-data. Preparing to unpack .../36-libglib2.0-data_2.58.3-2+deb10u2_all.deb ... Unpacking libglib2.0-data (2.58.3-2+deb10u2) ... Selecting previously unselected package libglib2.0-bin. Preparing to unpack .../37-libglib2.0-bin_2.58.3-2+deb10u2_armhf.deb ... Unpacking libglib2.0-bin (2.58.3-2+deb10u2) ... Selecting previously unselected package python3-lib2to3. Preparing to unpack .../38-python3-lib2to3_3.7.3-1_all.deb ... Unpacking python3-lib2to3 (3.7.3-1) ... Selecting previously unselected package python3-distutils. Preparing to unpack .../39-python3-distutils_3.7.3-1_all.deb ... Unpacking python3-distutils (3.7.3-1) ... Selecting previously unselected package libglib2.0-dev-bin. Preparing to unpack .../40-libglib2.0-dev-bin_2.58.3-2+deb10u2_armhf.deb ... Unpacking libglib2.0-dev-bin (2.58.3-2+deb10u2) ... Selecting previously unselected package libmount-dev:armhf. Preparing to unpack .../41-libmount-dev_2.33.1-0.1_armhf.deb ... Unpacking libmount-dev:armhf (2.33.1-0.1) ... Selecting previously unselected package libpcre16-3:armhf. Preparing to unpack .../42-libpcre16-3_2%3a8.39-12_armhf.deb ... Unpacking libpcre16-3:armhf (2:8.39-12) ... Selecting previously unselected package libpcre32-3:armhf. Preparing to unpack .../43-libpcre32-3_2%3a8.39-12_armhf.deb ... Unpacking libpcre32-3:armhf (2:8.39-12) ... Selecting previously unselected package libpcrecpp0v5:armhf. Preparing to unpack .../44-libpcrecpp0v5_2%3a8.39-12_armhf.deb ... Unpacking libpcrecpp0v5:armhf (2:8.39-12) ... Selecting previously unselected package libpcre3-dev:armhf. Preparing to unpack .../45-libpcre3-dev_2%3a8.39-12_armhf.deb ... Unpacking libpcre3-dev:armhf (2:8.39-12) ... Selecting previously unselected package libsepol1-dev:armhf. Preparing to unpack .../46-libsepol1-dev_2.8-1_armhf.deb ... Unpacking libsepol1-dev:armhf (2.8-1) ... Selecting previously unselected package libselinux1-dev:armhf. Preparing to unpack .../47-libselinux1-dev_2.8-1+b1_armhf.deb ... Unpacking libselinux1-dev:armhf (2.8-1+b1) ... Selecting previously unselected package zlib1g-dev:armhf. Preparing to unpack .../48-zlib1g-dev_1%3a1.2.11.dfsg-1_armhf.deb ... Unpacking zlib1g-dev:armhf (1:1.2.11.dfsg-1) ... Selecting previously unselected package libglib2.0-dev:armhf. Preparing to unpack .../49-libglib2.0-dev_2.58.3-2+deb10u2_armhf.deb ... Unpacking libglib2.0-dev:armhf (2.58.3-2+deb10u2) ... Selecting previously unselected package libdbus-glib-1-dev:armhf. Preparing to unpack .../50-libdbus-glib-1-dev_0.110-4_armhf.deb ... Unpacking libdbus-glib-1-dev:armhf (0.110-4) ... Selecting previously unselected package libpam0g-dev:armhf. Preparing to unpack .../51-libpam0g-dev_1.3.1-5_armhf.deb ... Unpacking libpam0g-dev:armhf (1.3.1-5) ... Setting up libpcrecpp0v5:armhf (2:8.39-12) ... Setting up libpipeline1:armhf (1.5.1-2) ... Setting up mime-support (3.62) ... Setting up libpcre16-3:armhf (2:8.39-12) ... Setting up libpam0g-dev:armhf (1.3.1-5) ... Setting up libmagic-mgc (1:5.35-4+deb10u1) ... Setting up libarchive-zip-perl (1.64-1) ... Setting up libglib2.0-0:armhf (2.58.3-2+deb10u2) ... No schema files found: doing nothing. Setting up libmagic1:armhf (1:5.35-4+deb10u1) ... Setting up libsepol1-dev:armhf (2.8-1) ... Setting up gettext-base (0.19.8.1-9) ... Setting up file (1:5.35-4+deb10u1) ... Setting up libffi-dev:armhf (3.2.1-9) ... Setting up libicu63:armhf (63.1-6+deb10u1) ... Setting up autotools-dev (20180224.1) ... Setting up libglib2.0-data (2.58.3-2+deb10u2) ... Setting up uuid-dev:armhf (2.33.1-0.1) ... Setting up libncurses6:armhf (6.1+20181013-2+deb10u2) ... Setting up libdbus-1-3:armhf (1.12.16-1) ... Setting up libsigsegv2:armhf (2.12-2) ... Setting up libpcre32-3:armhf (2:8.39-12) ... Setting up autopoint (0.19.8.1-9) ... Setting up pkg-config (0.29-6) ... Setting up zlib1g-dev:armhf (1:1.2.11.dfsg-1) ... Setting up sensible-utils (0.0.12) ... Setting up libuchardet0:armhf (0.0.6-3) ... Setting up libmpdec2:armhf (2.4.2-2) ... Setting up libbsd0:armhf (0.9.1-2) ... Setting up libelf1:armhf (0.176-1.1) ... Setting up readline-common (7.0-5) ... Setting up libxml2:armhf (2.9.4+dfsg1-7+b3) ... Setting up libreadline7:armhf (7.0-5) ... Setting up libfile-stripnondeterminism-perl (1.1.2-1) ... Setting up libblkid-dev:armhf (2.33.1-0.1) ... Setting up libpython3.7-stdlib:armhf (3.7.3-2+deb10u1) ... Setting up libtool (2.4.6-9) ... Setting up libpcre3-dev:armhf (2:8.39-12) ... Setting up libglib2.0-bin (2.58.3-2+deb10u2) ... Setting up m4 (1.4.18-2) ... Setting up libdbus-1-dev:armhf (1.12.16-1) ... Setting up libdbus-glib-1-2:armhf (0.110-4) ... Setting up bsdmainutils (11.1.2+b1) ... update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode Setting up libcroco3:armhf (0.6.12-3) ... Setting up autoconf (2.69-11) ... Setting up dwz (0.12-3) ... Setting up groff-base (1.22.4-3) ... Setting up libmount-dev:armhf (2.33.1-0.1) ... Setting up libpython3-stdlib:armhf (3.7.3-1) ... Setting up automake (1:1.16.1-4) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up python3.7 (3.7.3-2+deb10u1) ... Setting up gettext (0.19.8.1-9) ... Setting up libselinux1-dev:armhf (2.8-1+b1) ... Setting up libdbus-glib-1-dev-bin (0.110-4) ... Setting up python3 (3.7.3-1) ... Setting up man-db (2.8.5-2) ... Not building database; man-db/auto-update is not 'true'. Setting up intltool-debian (0.35.0+20060710.5) ... Setting up python3-lib2to3 (3.7.3-1) ... Setting up python3-distutils (3.7.3-1) ... Setting up libglib2.0-dev-bin (2.58.3-2+deb10u2) ... Setting up po-debconf (1.0.21) ... Setting up libglib2.0-dev:armhf (2.58.3-2+deb10u2) ... Setting up libdbus-glib-1-dev:armhf (0.110-4) ... Setting up debhelper (12.1.1) ... Setting up dh-autoreconf (19) ... Setting up dh-strip-nondeterminism (1.1.2-1) ... Processing triggers for libc-bin (2.28-10) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.23-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/pam-dbus-0.2.1/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b dpkg-buildpackage: info: source package pam-dbus dpkg-buildpackage: info: source version 0.2.1-3 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Joachim Breitner dpkg-source --before-build . dpkg-buildpackage: info: host architecture armhf fakeroot debian/rules clean dh --with autoreconf clean dh: Compatibility levels before 9 are deprecated (level 7 in use) dh_clean dh_clean: Compatibility levels before 9 are deprecated (level 7 in use) debian/rules build dh --with autoreconf build dh: Compatibility levels before 9 are deprecated (level 7 in use) dh_update_autotools_config dh_autoreconf libtoolize: putting auxiliary files in '.'. libtoolize: copying file './ltmain.sh' libtoolize: Consider adding 'AC_CONFIG_MACRO_DIRS([m4])' to configure.ac, libtoolize: and rerunning libtoolize and aclocal. libtoolize: Consider adding '-I m4' to ACLOCAL_AMFLAGS in Makefile.am. configure.ac:31: installing './compile' configure.ac:26: installing './missing' /usr/share/automake-1.16/am/ltlibrary.am: warning: 'pam_dbus.la': linking libtool libraries using a non-POSIX /usr/share/automake-1.16/am/ltlibrary.am: archiver requires 'AM_PROG_AR' in 'configure.ac' src/Makefile.am:22: while processing Libtool library 'pam_dbus.la' src/Makefile.am: installing './depcomp' dh_auto_configure dh_auto_configure: Compatibility levels before 9 are deprecated (level 7 in use) ./configure --build=arm-linux-gnueabihf --prefix=/usr --includedir=\${prefix}/include --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info --sysconfdir=/etc --localstatedir=/var --disable-silent-rules --libexecdir=\${prefix}/lib/pam-dbus --disable-maintainer-mode --disable-dependency-tracking configure: WARNING: unrecognized options: --disable-maintainer-mode checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking whether make supports the include directive... yes (GNU style) checking dependency style of gcc... none checking build system type... arm-unknown-linux-gnueabihf checking host system type... arm-unknown-linux-gnueabihf checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert arm-unknown-linux-gnueabihf file names to arm-unknown-linux-gnueabihf format... func_convert_file_noop checking how to convert arm-unknown-linux-gnueabihf file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking for g++... g++ checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking dependency style of g++... none checking how to run the C++ preprocessor... g++ -E checking for ld used by g++... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes checking for g++ option to produce PIC... -fPIC -DPIC checking if g++ PIC flag -fPIC -DPIC works... yes checking if g++ static flag -static works... yes checking if g++ supports -c -o file.o... yes checking if g++ supports -c -o file.o... (cached) yes checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... (cached) GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking security/pam_modules.h usability... yes checking security/pam_modules.h presence... yes checking for security/pam_modules.h... yes checking for dup2... yes checking for memset... yes checking for strchr... yes checking for strerror... yes checking for strrchr... yes checking for pid_t... yes checking vfork.h usability... no checking vfork.h presence... no checking for vfork.h... no checking for fork... yes checking for vfork... yes checking for working fork... yes checking for working vfork... (cached) yes checking whether lstat correctly handles trailing slash... yes checking whether lstat accepts an empty string... no checking whether lstat correctly handles trailing slash... (cached) yes checking for vprintf... yes checking for _doprnt... no checking fcntl.h usability... yes checking fcntl.h presence... yes checking for fcntl.h... yes checking limits.h usability... yes checking limits.h presence... yes checking for limits.h... yes checking syslog.h usability... yes checking syslog.h presence... yes checking for syslog.h... yes checking termios.h usability... yes checking termios.h presence... yes checking for termios.h... yes checking for ANSI C header files... (cached) yes checking for sys/wait.h that is POSIX.1 compatible... yes checking for an ANSI C-conforming const... yes checking for mode_t... yes checking for pid_t... (cached) yes checking return type of signal handlers... void checking for uid_t in sys/types.h... yes checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for GLIB... yes checking for DBUS... yes checking for DBUS_GLIB... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating src/Makefile config.status: creating data/Makefile config.status: creating handlers/Makefile config.status: creating Makefile config.status: creating config.h config.status: executing depfiles commands config.status: executing libtool commands configure: WARNING: unrecognized options: --disable-maintainer-mode dh_auto_build dh_auto_build: Compatibility levels before 9 are deprecated (level 7 in use) make -j1 make[1]: Entering directory '/build/pam-dbus-0.2.1' make all-recursive make[2]: Entering directory '/build/pam-dbus-0.2.1' Making all in src make[3]: Entering directory '/build/pam-dbus-0.2.1/src' /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -DSBINDIR=\"/usr/sbin\" -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -I/usr/include/dbus-1.0 -I/usr/lib/arm-linux-gnueabihf/dbus-1.0/include -I/usr/include/dbus-1.0 -I/usr/lib/arm-linux-gnueabihf/dbus-1.0/include -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -g -O2 -pipe -Wall -L/lib -c -o pam_dbus_la-pam_dbus.lo `test -f 'pam_dbus.c' || echo './'`pam_dbus.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -DSBINDIR=\"/usr/sbin\" -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -I/usr/include/dbus-1.0 -I/usr/lib/arm-linux-gnueabihf/dbus-1.0/include -I/usr/include/dbus-1.0 -I/usr/lib/arm-linux-gnueabihf/dbus-1.0/include -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -g -O2 -pipe -Wall -L/lib -c pam_dbus.c -fPIC -DPIC -o .libs/pam_dbus_la-pam_dbus.o pam_dbus.c: In function 'pam_sm_authenticate': pam_dbus.c:35:3: warning: 'g_type_init' is deprecated [-Wdeprecated-declarations] g_type_init (); ^~~~~~~~~~~ In file included from /usr/include/glib-2.0/gobject/gobject.h:24, from /usr/include/glib-2.0/gobject/gbinding.h:29, from /usr/include/glib-2.0/glib-object.h:23, from /usr/include/dbus-1.0/dbus/dbus-glib.h:27, from pam_dbus.c:26: /usr/include/glib-2.0/gobject/gtype.h:688:23: note: declared here void g_type_init (void); ^~~~~~~~~~~ /bin/bash ../libtool --tag=CC --mode=link gcc -DSBINDIR=\"/usr/sbin\" -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -I/usr/include/dbus-1.0 -I/usr/lib/arm-linux-gnueabihf/dbus-1.0/include -I/usr/include/dbus-1.0 -I/usr/lib/arm-linux-gnueabihf/dbus-1.0/include -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -g -O2 -pipe -Wall -L/lib -module -avoid-version -o pam_dbus.la -rpath /lib/security pam_dbus_la-pam_dbus.lo -ldbus-glib-1 -ldbus-1 -lgobject-2.0 -lglib-2.0 -ldbus-1 -lglib-2.0 -ldl -lpam -lpam_misc libtool: link: gcc -shared -fPIC -DPIC .libs/pam_dbus_la-pam_dbus.o -L/lib -ldbus-glib-1 -lgobject-2.0 -ldbus-1 -lglib-2.0 -ldl -lpam -lpam_misc -g -O2 -Wl,-soname -Wl,pam_dbus.so -o .libs/pam_dbus.so libtool: link: ( cd ".libs" && rm -f "pam_dbus.la" && ln -s "../pam_dbus.la" "pam_dbus.la" ) make[3]: Leaving directory '/build/pam-dbus-0.2.1/src' Making all in data make[3]: Entering directory '/build/pam-dbus-0.2.1/data' sed -e 's,[@]pkgdatadir[@],/usr/share/pam_dbus,g' \ < ./pam-dbus-notify.desktop.in > pam-dbus-notify.desktop make[3]: Leaving directory '/build/pam-dbus-0.2.1/data' Making all in handlers make[3]: Entering directory '/build/pam-dbus-0.2.1/handlers' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/build/pam-dbus-0.2.1/handlers' make[3]: Entering directory '/build/pam-dbus-0.2.1' make[3]: Leaving directory '/build/pam-dbus-0.2.1' make[2]: Leaving directory '/build/pam-dbus-0.2.1' make[1]: Leaving directory '/build/pam-dbus-0.2.1' dh_auto_test dh_auto_test: Compatibility levels before 9 are deprecated (level 7 in use) make -j1 check VERBOSE=1 make[1]: Entering directory '/build/pam-dbus-0.2.1' Making check in src make[2]: Entering directory '/build/pam-dbus-0.2.1/src' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/build/pam-dbus-0.2.1/src' Making check in data make[2]: Entering directory '/build/pam-dbus-0.2.1/data' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/build/pam-dbus-0.2.1/data' Making check in handlers make[2]: Entering directory '/build/pam-dbus-0.2.1/handlers' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/build/pam-dbus-0.2.1/handlers' make[2]: Entering directory '/build/pam-dbus-0.2.1' make[2]: Leaving directory '/build/pam-dbus-0.2.1' make[1]: Leaving directory '/build/pam-dbus-0.2.1' fakeroot debian/rules binary dh --with autoreconf binary dh: Compatibility levels before 9 are deprecated (level 7 in use) dh_testroot dh_prep dh_auto_install dh_auto_install: Compatibility levels before 9 are deprecated (level 7 in use) make -j1 install DESTDIR=/build/pam-dbus-0.2.1/debian/tmp AM_UPDATE_INFO_DIR=no make[1]: Entering directory '/build/pam-dbus-0.2.1' Making install in src make[2]: Entering directory '/build/pam-dbus-0.2.1/src' make[3]: Entering directory '/build/pam-dbus-0.2.1/src' make[3]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/build/pam-dbus-0.2.1/debian/tmp/lib/security' /bin/bash ../libtool --mode=install /usr/bin/install -c pam_dbus.la '/build/pam-dbus-0.2.1/debian/tmp/lib/security' libtool: install: /usr/bin/install -c .libs/pam_dbus.so /build/pam-dbus-0.2.1/debian/tmp/lib/security/pam_dbus.so libtool: install: /usr/bin/install -c .libs/pam_dbus.lai /build/pam-dbus-0.2.1/debian/tmp/lib/security/pam_dbus.la libtool: warning: remember to run 'libtool --finish /lib/security' make[3]: Leaving directory '/build/pam-dbus-0.2.1/src' make[2]: Leaving directory '/build/pam-dbus-0.2.1/src' Making install in data make[2]: Entering directory '/build/pam-dbus-0.2.1/data' make[3]: Entering directory '/build/pam-dbus-0.2.1/data' make[3]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/build/pam-dbus-0.2.1/debian/tmp/etc/dbus-1/system.d' /usr/bin/install -c -m 644 pam_dbus.conf '/build/pam-dbus-0.2.1/debian/tmp/etc/dbus-1/system.d' /bin/mkdir -p '/build/pam-dbus-0.2.1/debian/tmp/etc/xdg/autostart' /usr/bin/install -c -m 644 pam-dbus-notify.desktop '/build/pam-dbus-0.2.1/debian/tmp/etc/xdg/autostart' make[3]: Leaving directory '/build/pam-dbus-0.2.1/data' make[2]: Leaving directory '/build/pam-dbus-0.2.1/data' Making install in handlers make[2]: Entering directory '/build/pam-dbus-0.2.1/handlers' make[3]: Entering directory '/build/pam-dbus-0.2.1/handlers' make[3]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/build/pam-dbus-0.2.1/debian/tmp/usr/share/pam_dbus' /usr/bin/install -c pam-dbus-notify '/build/pam-dbus-0.2.1/debian/tmp/usr/share/pam_dbus' make[3]: Leaving directory '/build/pam-dbus-0.2.1/handlers' make[2]: Leaving directory '/build/pam-dbus-0.2.1/handlers' make[2]: Entering directory '/build/pam-dbus-0.2.1' make[3]: Entering directory '/build/pam-dbus-0.2.1' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/build/pam-dbus-0.2.1' make[2]: Leaving directory '/build/pam-dbus-0.2.1' make[1]: Leaving directory '/build/pam-dbus-0.2.1' dh_install dh_install: Compatibility levels before 9 are deprecated (level 7 in use) dh_installdocs dh_installdocs: Compatibility levels before 9 are deprecated (level 7 in use) dh_installchangelogs dh_installchangelogs: Compatibility levels before 9 are deprecated (level 7 in use) dh_perl dh_link dh_strip_nondeterminism dh_compress dh_compress: Compatibility levels before 9 are deprecated (level 7 in use) dh_compress: Compatibility levels before 9 are deprecated (level 7 in use) dh_fixperms dh_missing dh_missing: Compatibility levels before 9 are deprecated (level 7 in use) dh_strip dh_strip: Compatibility levels before 9 are deprecated (level 7 in use) dh_strip: Compatibility levels before 9 are deprecated (level 7 in use) dh_makeshlibs dh_makeshlibs: Compatibility levels before 9 are deprecated (level 7 in use) dh_shlibdeps dh_shlibdeps: Compatibility levels before 9 are deprecated (level 7 in use) dh_shlibdeps: Compatibility levels before 9 are deprecated (level 7 in use) dpkg-shlibdeps: warning: package could avoid a useless dependency if debian/libpam-dbus/lib/security/pam_dbus.so was not linked against libdbus-1.so.3 (it uses none of the library's symbols) dpkg-shlibdeps: warning: package could avoid a useless dependency if debian/libpam-dbus/lib/security/pam_dbus.so was not linked against libdl.so.2 (it uses none of the library's symbols) dpkg-shlibdeps: warning: package could avoid a useless dependency if debian/libpam-dbus/lib/security/pam_dbus.so was not linked against libpam_misc.so.0 (it uses none of the library's symbols) dh_installdeb dh_installdeb: Compatibility levels before 9 are deprecated (level 7 in use) dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libpam-dbus-dbgsym' in '../libpam-dbus-dbgsym_0.2.1-3_armhf.deb'. dpkg-deb: building package 'libpam-dbus' in '../libpam-dbus_0.2.1-3_armhf.deb'. dpkg-deb: building package 'pam-dbus-notify' in '../pam-dbus-notify_0.2.1-3_all.deb'. dpkg-genbuildinfo --build=binary dpkg-genchanges --build=binary >../pam-dbus_0.2.1-3_armhf.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/23281 and its subdirectories I: Current time: Mon May 18 22:18:27 -12 2020 I: pbuilder-time-stamp: 1589883507 Tue May 19 10:18:33 UTC 2020 I: 1st build successful. Starting 2nd build on remote node ff4a-armhf-rb.debian.net. Tue May 19 10:18:33 UTC 2020 I: Preparing to do remote build '2' on ff4a-armhf-rb.debian.net. Tue May 19 10:20:40 UTC 2020 I: Deleting $TMPDIR on ff4a-armhf-rb.debian.net. Tue May 19 10:20:43 UTC 2020 I: pam-dbus_0.2.1-3_armhf.changes: Format: 1.8 Date: Tue, 14 Jan 2014 23:34:10 +0000 Source: pam-dbus Binary: libpam-dbus libpam-dbus-dbgsym pam-dbus-notify Architecture: armhf all Version: 0.2.1-3 Distribution: unstable Urgency: medium Maintainer: Joachim Breitner Changed-By: Joachim Breitner Description: libpam-dbus - A PAM module which asks the logged in user for confirmation pam-dbus-notify - Handler for the pam-dbus module, using notification-daemon Closes: 734825 Changes: pam-dbus (0.2.1-3) unstable; urgency=medium . * Build with autoreconf (Closes: #734825) Checksums-Sha1: 2638b48c28088e9e55b874fe550536169ff670ee 6656 libpam-dbus-dbgsym_0.2.1-3_armhf.deb 99cad1d5ecb6ca3dbb62308f328faf60497a0595 5060 libpam-dbus_0.2.1-3_armhf.deb 8037232a51ab46e41edc96d300a69158eab58866 3176 pam-dbus-notify_0.2.1-3_all.deb a7d703696ac301a0dddf518418b31d6ab88ccbe8 5962 pam-dbus_0.2.1-3_armhf.buildinfo Checksums-Sha256: 00b3c81f0d3b69e86483a2684334ab066360fab1f38bd03a3003e7acbbabb25a 6656 libpam-dbus-dbgsym_0.2.1-3_armhf.deb 953fe235754b9abbe8f79858932713f8a31a9837fd9e63bb6be5c5e3b2859d98 5060 libpam-dbus_0.2.1-3_armhf.deb 5da70240ded7a83d6dc95d18d9dc62a48345a39bddafb29d2a6854ed34084532 3176 pam-dbus-notify_0.2.1-3_all.deb 94c99dc3376358ff939f0fccd2981c8d3730661df385ca16f975f9959dc29e2a 5962 pam-dbus_0.2.1-3_armhf.buildinfo Files: 836308a90647b656dd9b67831b3bbf0e 6656 debug optional libpam-dbus-dbgsym_0.2.1-3_armhf.deb 17f6fe355962b86c817aec2ba0381b1b 5060 admin optional libpam-dbus_0.2.1-3_armhf.deb 6035b1b5665e1775f597198ce2d27661 3176 admin optional pam-dbus-notify_0.2.1-3_all.deb 6bed333d35146f6e6f8da3ecbc63906a 5962 admin optional pam-dbus_0.2.1-3_armhf.buildinfo Tue May 19 10:20:44 UTC 2020 I: diffoscope 144 will be used to compare the two builds: # Profiling output for: /usr/bin/diffoscope --html /srv/reproducible-results/rbuild-debian/tmp.Ps2JZAt5Hb/pam-dbus_0.2.1-3.diffoscope.html --text /srv/reproducible-results/rbuild-debian/tmp.Ps2JZAt5Hb/pam-dbus_0.2.1-3.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/tmp.Ps2JZAt5Hb/pam-dbus_0.2.1-3.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/tmp.Ps2JZAt5Hb/b1/pam-dbus_0.2.1-3_armhf.changes /srv/reproducible-results/rbuild-debian/tmp.Ps2JZAt5Hb/b2/pam-dbus_0.2.1-3_armhf.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.372s) 0.372s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.055s) 0.055s 10 calls diffoscope.comparators.binary.FilesystemFile Tue May 19 10:20:46 UTC 2020 I: diffoscope 144 found no differences in the changes files, and a .buildinfo file also exists. Tue May 19 10:20:46 UTC 2020 I: pam-dbus from buster built successfully and reproducibly on armhf. Tue May 19 10:20:47 UTC 2020 I: Submitting .buildinfo files to external archives: Tue May 19 10:20:48 UTC 2020 I: Submitting 8.0K b1/pam-dbus_0.2.1-3_armhf.buildinfo.asc Tue May 19 10:20:49 UTC 2020 I: Submitting 8.0K b2/pam-dbus_0.2.1-3_armhf.buildinfo.asc Tue May 19 10:20:50 UTC 2020 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Tue May 19 10:20:50 UTC 2020 I: Done submitting .buildinfo files. Tue May 19 10:20:50 UTC 2020 I: Removing signed pam-dbus_0.2.1-3_armhf.buildinfo.asc files: removed './b1/pam-dbus_0.2.1-3_armhf.buildinfo.asc' removed './b2/pam-dbus_0.2.1-3_armhf.buildinfo.asc'