Fri May 29 06:22:43 UTC 2020 I: starting to build libzmq-ffi-perl/buster/armhf on jenkins on '2020-05-29 06:22' Fri May 29 06:22:43 UTC 2020 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/armhf_35/3318/console.log Fri May 29 06:22:43 UTC 2020 I: Downloading source for buster/libzmq-ffi-perl=1.11-2 --2020-05-29 06:22:43-- http://deb.debian.org/debian/pool/main/libz/libzmq-ffi-perl/libzmq-ffi-perl_1.11-2.dsc Connecting to 78.137.99.97:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2496 (2.4K) Saving to: ‘libzmq-ffi-perl_1.11-2.dsc’ 0K .. 100% 98.6M=0s 2020-05-29 06:22:43 (98.6 MB/s) - ‘libzmq-ffi-perl_1.11-2.dsc’ saved [2496/2496] Fri May 29 06:22:43 UTC 2020 I: libzmq-ffi-perl_1.11-2.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: libzmq-ffi-perl Binary: libzmq-ffi-perl Architecture: all Version: 1.11-2 Maintainer: Debian Perl Group Uploaders: gregor herrmann Homepage: https://metacpan.org/release/ZMQ-FFI Standards-Version: 3.9.8 Vcs-Browser: https://anonscm.debian.org/cgit/pkg-perl/packages/libzmq-ffi-perl.git Vcs-Git: https://anonscm.debian.org/git/pkg-perl/packages/libzmq-ffi-perl.git Testsuite: autopkgtest-pkg-perl Build-Depends: debhelper (>= 9), libanyevent-perl, libclass-xsaccessor-perl (>= 1.18), libffi-checklib-perl, libffi-platypus-perl, libimport-into-perl, libmoo-perl (>= 1.004005), libnamespace-clean-perl, libsub-exporter-perl, libsub-override-perl, libsys-sigaction-perl, libtest-deep-perl, libtest-exception-perl, libtest-nowarnings-perl, libtest-warnings-perl, libtry-tiny-perl, libzmq3-dev, perl Package-List: libzmq-ffi-perl deb perl optional arch=all Checksums-Sha1: 21c475b3d9439310ff434ea384aeeca583cc0884 38479 libzmq-ffi-perl_1.11.orig.tar.gz e8fc8ffcc0f72ee81bf1fb4b3e61b4d282e9a1f3 2704 libzmq-ffi-perl_1.11-2.debian.tar.xz Checksums-Sha256: 7fce1ddfe8a422ac5d57b7e86b7f12fa07142fe470df9a575065d24943ca3856 38479 libzmq-ffi-perl_1.11.orig.tar.gz 180a583eb4232a4fb9c79074de795e9496ee396ea5e639445c627203a0225713 2704 libzmq-ffi-perl_1.11-2.debian.tar.xz Files: 08f44329798f9ed6e59bfa762c5fc39e 38479 libzmq-ffi-perl_1.11.orig.tar.gz 7fe8607f1890ea7c62062bef09d63eab 2704 libzmq-ffi-perl_1.11-2.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQJ8BAEBCgBmBQJX3E6xXxSAAAAAAC4AKGlzc3Vlci1mcHJAbm90YXRpb25zLm9w ZW5wZ3AuZmlmdGhob3JzZW1hbi5uZXREMUUxMzE2RTkzQTc2MEE4MTA0RDg1RkFC QjNBNjgwMTg2NDlBQTA2AAoJELs6aAGGSaoGHusP/2D5rohsynJym3dlwbTD1cgY 400EFahH+GRnPKT4DtKeDyvDg0fTS03GhqYIIkHyYeeUNguA1uIaVxnc4De5BE7A GFni0lxgHoCmyC3373HoAvkdiFFQNTp/STQPDwTZEXio+N4Si4Wy1z1zfcDZcR6h zrKLtmDW0lh4a7iH4Rmri3SaGlDKRwrUHMKnprZnrFKACPnfYtZu6k/81ROo2Oec VQ/IZpwTnC3RULq7DdWvAeYftuI+dpfNegeaNElB3kZ0VwI/o2JZEyfGZsh4vn1t 9RBejQPFZvZ+TsyRTh6grVuJuE9fxjS34abuparJ+vrXX3SfB3vqbI0lfIk7ZwWu yJ+AMG84MUt1NALdVDFDsp1I3E0eIu/J1sbJqqZzGlzxTNP8dtk7RVFjhM96a9hz 8x30+yz/NtT4byvqjwJV2CX7lhZzPfoPnHRnvlJms9cHnMG7dgBPZMPPBa5GZt80 0diDIVqqJqa/Es5xHPTmxjG+abye/9/F9mrPPbVZrb5cvmZzSXihJkYHGyTSwH7z 6XqmfU67xaD73Z6DhjstYafuGn1z4zKk9U6y3BE4nxz8yrY2IFfG8WGN3AP75+aw ZcwGDo9RhUHAtQclPmje+yMfFZ9fhditSrKkrOQagcSveQrAln24jVCkPD+Z923S FocHRHYGJ7L/GhYi3AtV =hp2J -----END PGP SIGNATURE----- Fri May 29 06:22:43 UTC 2020 I: Checking whether the package is not for us Fri May 29 06:22:43 UTC 2020 I: Starting 1st build on remote node p64b-armhf-rb.debian.net. Fri May 29 06:22:43 UTC 2020 I: Preparing to do remote build '1' on p64b-armhf-rb.debian.net. Fri May 29 06:26:38 UTC 2020 I: Deleting $TMPDIR on p64b-armhf-rb.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Thu May 28 18:22:58 -12 2020 I: pbuilder-time-stamp: 1590733378 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/buster-reproducible-base.tgz] I: copying local configuration I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libzmq-ffi-perl_1.11-2.dsc] I: copying [./libzmq-ffi-perl_1.11.orig.tar.gz] I: copying [./libzmq-ffi-perl_1.11-2.debian.tar.xz] I: Extracting source gpgv: unknown type of key resource 'trustedkeys.kbx' gpgv: keyblock resource '/root/.gnupg/trustedkeys.kbx': General error gpgv: Signature made Fri Sep 16 07:57:37 2016 -12 gpgv: using RSA key BB3A68018649AA06 gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./libzmq-ffi-perl_1.11-2.dsc dpkg-source: info: extracting libzmq-ffi-perl in libzmq-ffi-perl-1.11 dpkg-source: info: unpacking libzmq-ffi-perl_1.11.orig.tar.gz dpkg-source: info: unpacking libzmq-ffi-perl_1.11-2.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying fix_t_proxy.patch I: using fakeroot in build. I: Installing the build-deps -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: armhf Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper (>= 9), libanyevent-perl, libclass-xsaccessor-perl (>= 1.18), libffi-checklib-perl, libffi-platypus-perl, libimport-into-perl, libmoo-perl (>= 1.004005), libnamespace-clean-perl, libsub-exporter-perl, libsub-override-perl, libsys-sigaction-perl, libtest-deep-perl, libtest-exception-perl, libtest-nowarnings-perl, libtest-warnings-perl, libtry-tiny-perl, libzmq3-dev, perl dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 18932 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper (>= 9); however: Package debhelper is not installed. pbuilder-satisfydepends-dummy depends on libanyevent-perl; however: Package libanyevent-perl is not installed. pbuilder-satisfydepends-dummy depends on libclass-xsaccessor-perl (>= 1.18); however: Package libclass-xsaccessor-perl is not installed. pbuilder-satisfydepends-dummy depends on libffi-checklib-perl; however: Package libffi-checklib-perl is not installed. pbuilder-satisfydepends-dummy depends on libffi-platypus-perl; however: Package libffi-platypus-perl is not installed. pbuilder-satisfydepends-dummy depends on libimport-into-perl; however: Package libimport-into-perl is not installed. pbuilder-satisfydepends-dummy depends on libmoo-perl (>= 1.004005); however: Package libmoo-perl is not installed. pbuilder-satisfydepends-dummy depends on libnamespace-clean-perl; however: Package libnamespace-clean-perl is not installed. pbuilder-satisfydepends-dummy depends on libsub-exporter-perl; however: Package libsub-exporter-perl is not installed. pbuilder-satisfydepends-dummy depends on libsub-override-perl; however: Package libsub-override-perl is not installed. pbuilder-satisfydepends-dummy depends on libsys-sigaction-perl; however: Package libsys-sigaction-perl is not installed. pbuilder-satisfydepends-dummy depends on libtest-deep-perl; however: Package libtest-deep-perl is not installed. pbuilder-satisfydepends-dummy depends on libtest-exception-perl; however: Package libtest-exception-perl is not installed. pbuilder-satisfydepends-dummy depends on libtest-nowarnings-perl; however: Package libtest-nowarnings-perl is not installed. pbuilder-satisfydepends-dummy depends on libtest-warnings-perl; however: Package libtest-warnings-perl is not installed. pbuilder-satisfydepends-dummy depends on libtry-tiny-perl; however: Package libtry-tiny-perl is not installed. pbuilder-satisfydepends-dummy depends on libzmq3-dev; however: Package libzmq3-dev is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdmainutils{a} comerr-dev{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} krb5-multidev{a} libanyevent-perl{a} libarchive-zip-perl{a} libb-hooks-endofscope-perl{a} libb-hooks-op-check-perl{a} libbsd0{a} libcapture-tiny-perl{a} libclass-method-modifiers-perl{a} libclass-xsaccessor-perl{a} libcroco3{a} libdata-optlist-perl{a} libdevel-callchecker-perl{a} libdevel-globaldestruction-perl{a} libdynaloader-functions-perl{a} libelf1{a} libffi-checklib-perl{a} libffi-platypus-perl{a} libfile-stripnondeterminism-perl{a} libglib2.0-0{a} libgssapi-krb5-2{a} libgssrpc4{a} libicu63{a} libimport-into-perl{a} libk5crypto3{a} libkadm5clnt-mit11{a} libkadm5srv-mit11{a} libkdb5-9{a} libkeyutils1{a} libkrb5-3{a} libkrb5-dev{a} libkrb5support0{a} libmagic-mgc{a} libmagic1{a} libmodule-implementation-perl{a} libmodule-runtime-perl{a} libmoo-perl{a} libnamespace-clean-perl{a} libncurses6{a} libnorm-dev{a} libnorm1{a} libpackage-stash-perl{a} libparams-classify-perl{a} libparams-util-perl{a} libpgm-5.2-0{a} libpgm-dev{a} libpipeline1{a} librole-tiny-perl{a} libsigsegv2{a} libsodium-dev{a} libsodium23{a} libssl1.1{a} libstrictures-perl{a} libsub-exporter-perl{a} libsub-exporter-progressive-perl{a} libsub-identify-perl{a} libsub-install-perl{a} libsub-name-perl{a} libsub-override-perl{a} libsub-quote-perl{a} libsub-uplevel-perl{a} libsys-sigaction-perl{a} libtest-deep-perl{a} libtest-exception-perl{a} libtest-nowarnings-perl{a} libtest-warnings-perl{a} libtool{a} libtry-tiny-perl{a} libuchardet0{a} libvariable-magic-perl{a} libxml2{a} libzmq3-dev{a} libzmq5{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl krb5-locales libarchive-cpio-perl libasync-interrupt-perl libev-perl libevent-perl libglib2.0-data libgpm2 libguard-perl libltdl-dev libmail-sendmail-perl libpackage-stash-xs-perl lynx shared-mime-info wget xdg-user-dirs 0 packages upgraded, 91 newly installed, 0 to remove and 0 not upgraded. Need to get 24.0 MB of archives. After unpacking 78.7 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian buster/main armhf libbsd0 armhf 0.9.1-2 [103 kB] Get: 2 http://deb.debian.org/debian buster/main armhf bsdmainutils armhf 11.1.2+b1 [186 kB] Get: 3 http://deb.debian.org/debian buster/main armhf libuchardet0 armhf 0.0.6-3 [62.2 kB] Get: 4 http://deb.debian.org/debian buster/main armhf groff-base armhf 1.22.4-3 [828 kB] Get: 5 http://deb.debian.org/debian buster/main armhf libpipeline1 armhf 1.5.1-2 [26.8 kB] Get: 6 http://deb.debian.org/debian buster/main armhf man-db armhf 2.8.5-2 [1240 kB] Get: 7 http://deb.debian.org/debian buster/main armhf sensible-utils all 0.0.12 [15.8 kB] Get: 8 http://deb.debian.org/debian buster/main armhf libmagic-mgc armhf 1:5.35-4+deb10u1 [242 kB] Get: 9 http://deb.debian.org/debian buster/main armhf libmagic1 armhf 1:5.35-4+deb10u1 [110 kB] Get: 10 http://deb.debian.org/debian buster/main armhf file armhf 1:5.35-4+deb10u1 [65.5 kB] Get: 11 http://deb.debian.org/debian buster/main armhf gettext-base armhf 0.19.8.1-9 [118 kB] Get: 12 http://deb.debian.org/debian buster/main armhf libsigsegv2 armhf 2.12-2 [32.1 kB] Get: 13 http://deb.debian.org/debian buster/main armhf m4 armhf 1.4.18-2 [190 kB] Get: 14 http://deb.debian.org/debian buster/main armhf autoconf all 2.69-11 [341 kB] Get: 15 http://deb.debian.org/debian buster/main armhf autotools-dev all 20180224.1 [77.0 kB] Get: 16 http://deb.debian.org/debian buster/main armhf automake all 1:1.16.1-4 [771 kB] Get: 17 http://deb.debian.org/debian buster/main armhf autopoint all 0.19.8.1-9 [434 kB] Get: 18 http://deb.debian.org/debian buster/main armhf comerr-dev armhf 2.1-1.44.5-1+deb10u3 [102 kB] Get: 19 http://deb.debian.org/debian buster/main armhf libtool all 2.4.6-9 [547 kB] Get: 20 http://deb.debian.org/debian buster/main armhf dh-autoreconf all 19 [16.9 kB] Get: 21 http://deb.debian.org/debian buster/main armhf libarchive-zip-perl all 1.64-1 [96.8 kB] Get: 22 http://deb.debian.org/debian buster/main armhf libfile-stripnondeterminism-perl all 1.1.2-1 [19.8 kB] Get: 23 http://deb.debian.org/debian buster/main armhf dh-strip-nondeterminism all 1.1.2-1 [13.0 kB] Get: 24 http://deb.debian.org/debian buster/main armhf libelf1 armhf 0.176-1.1 [158 kB] Get: 25 http://deb.debian.org/debian buster/main armhf dwz armhf 0.12-3 [72.0 kB] Get: 26 http://deb.debian.org/debian buster/main armhf libglib2.0-0 armhf 2.58.3-2+deb10u2 [1101 kB] Get: 27 http://deb.debian.org/debian buster/main armhf libicu63 armhf 63.1-6+deb10u1 [8005 kB] Get: 28 http://deb.debian.org/debian buster/main armhf libxml2 armhf 2.9.4+dfsg1-7+b3 [595 kB] Get: 29 http://deb.debian.org/debian buster/main armhf libcroco3 armhf 0.6.12-3 [133 kB] Get: 30 http://deb.debian.org/debian buster/main armhf libncurses6 armhf 6.1+20181013-2+deb10u2 [79.8 kB] Get: 31 http://deb.debian.org/debian buster/main armhf gettext armhf 0.19.8.1-9 [1242 kB] Get: 32 http://deb.debian.org/debian buster/main armhf intltool-debian all 0.35.0+20060710.5 [26.8 kB] Get: 33 http://deb.debian.org/debian buster/main armhf po-debconf all 1.0.21 [248 kB] Get: 34 http://deb.debian.org/debian buster/main armhf debhelper all 12.1.1 [1016 kB] Get: 35 http://deb.debian.org/debian buster/main armhf libkeyutils1 armhf 1.6-6 [13.9 kB] Get: 36 http://deb.debian.org/debian buster/main armhf libkrb5support0 armhf 1.17-3 [62.3 kB] Get: 37 http://deb.debian.org/debian buster/main armhf libk5crypto3 armhf 1.17-3 [119 kB] Get: 38 http://deb.debian.org/debian buster/main armhf libssl1.1 armhf 1.1.1d-0+deb10u3 [1299 kB] Get: 39 http://deb.debian.org/debian buster/main armhf libkrb5-3 armhf 1.17-3 [323 kB] Get: 40 http://deb.debian.org/debian buster/main armhf libgssapi-krb5-2 armhf 1.17-3 [137 kB] Get: 41 http://deb.debian.org/debian buster/main armhf libgssrpc4 armhf 1.17-3 [83.3 kB] Get: 42 http://deb.debian.org/debian buster/main armhf libkdb5-9 armhf 1.17-3 [68.0 kB] Get: 43 http://deb.debian.org/debian buster/main armhf libkadm5srv-mit11 armhf 1.17-3 [78.2 kB] Get: 44 http://deb.debian.org/debian buster/main armhf libkadm5clnt-mit11 armhf 1.17-3 [68.7 kB] Get: 45 http://deb.debian.org/debian buster/main armhf krb5-multidev armhf 1.17-3 [156 kB] Get: 46 http://deb.debian.org/debian buster/main armhf libanyevent-perl armhf 7.140-3 [393 kB] Get: 47 http://deb.debian.org/debian buster/main armhf libb-hooks-op-check-perl armhf 0.22-1+b1 [11.0 kB] Get: 48 http://deb.debian.org/debian buster/main armhf libdynaloader-functions-perl all 0.003-1 [12.6 kB] Get: 49 http://deb.debian.org/debian buster/main armhf libdevel-callchecker-perl armhf 0.008-1 [15.5 kB] Get: 50 http://deb.debian.org/debian buster/main armhf libparams-classify-perl armhf 0.015-1+b1 [24.2 kB] Get: 51 http://deb.debian.org/debian buster/main armhf libmodule-runtime-perl all 0.016-1 [19.4 kB] Get: 52 http://deb.debian.org/debian buster/main armhf libtry-tiny-perl all 0.30-1 [23.3 kB] Get: 53 http://deb.debian.org/debian buster/main armhf libmodule-implementation-perl all 0.09-1 [12.9 kB] Get: 54 http://deb.debian.org/debian buster/main armhf libsub-exporter-progressive-perl all 0.001013-1 [7588 B] Get: 55 http://deb.debian.org/debian buster/main armhf libvariable-magic-perl armhf 0.62-1+b1 [43.4 kB] Get: 56 http://deb.debian.org/debian buster/main armhf libb-hooks-endofscope-perl all 0.24-1 [18.6 kB] Get: 57 http://deb.debian.org/debian buster/main armhf libcapture-tiny-perl all 0.48-1 [26.0 kB] Get: 58 http://deb.debian.org/debian buster/main armhf libclass-method-modifiers-perl all 2.12-1 [18.6 kB] Get: 59 http://deb.debian.org/debian buster/main armhf libclass-xsaccessor-perl armhf 1.19-3+b2 [37.5 kB] Get: 60 http://deb.debian.org/debian buster/main armhf libparams-util-perl armhf 1.07-3+b4 [21.8 kB] Get: 61 http://deb.debian.org/debian buster/main armhf libsub-install-perl all 0.928-1 [11.4 kB] Get: 62 http://deb.debian.org/debian buster/main armhf libdata-optlist-perl all 0.110-1 [10.6 kB] Get: 63 http://deb.debian.org/debian buster/main armhf libdevel-globaldestruction-perl all 0.14-1 [8084 B] Get: 64 http://deb.debian.org/debian buster/main armhf libffi-checklib-perl all 0.23-1 [12.5 kB] Get: 65 http://deb.debian.org/debian buster/main armhf libffi-platypus-perl armhf 0.83-1 [212 kB] Get: 66 http://deb.debian.org/debian buster/main armhf libimport-into-perl all 1.002005-1 [11.6 kB] Get: 67 http://deb.debian.org/debian buster/main armhf libkrb5-dev armhf 1.17-3 [47.4 kB] Get: 68 http://deb.debian.org/debian buster/main armhf librole-tiny-perl all 2.000006-1 [19.4 kB] Get: 69 http://deb.debian.org/debian buster/main armhf libstrictures-perl all 2.000005-1 [18.3 kB] Get: 70 http://deb.debian.org/debian buster/main armhf libsub-quote-perl all 2.005001-1 [17.9 kB] Get: 71 http://deb.debian.org/debian buster/main armhf libmoo-perl all 2.003004-2 [57.4 kB] Get: 72 http://deb.debian.org/debian buster/main armhf libpackage-stash-perl all 0.38-1 [21.7 kB] Get: 73 http://deb.debian.org/debian buster/main armhf libsub-identify-perl armhf 0.14-1+b1 [11.5 kB] Get: 74 http://deb.debian.org/debian buster/main armhf libsub-name-perl armhf 0.21-1+b3 [13.0 kB] Get: 75 http://deb.debian.org/debian buster/main armhf libnamespace-clean-perl all 0.27-1 [17.3 kB] Get: 76 http://deb.debian.org/debian buster/main armhf libnorm1 armhf 1.5.8+dfsg2-1 [243 kB] Get: 77 http://deb.debian.org/debian buster/main armhf libnorm-dev armhf 1.5.8+dfsg2-1 [410 kB] Get: 78 http://deb.debian.org/debian buster/main armhf libpgm-5.2-0 armhf 5.2.122~dfsg-3 [155 kB] Get: 79 http://deb.debian.org/debian buster/main armhf libpgm-dev armhf 5.2.122~dfsg-3 [188 kB] Get: 80 http://deb.debian.org/debian buster/main armhf libsodium23 armhf 1.0.17-1 [144 kB] Get: 81 http://deb.debian.org/debian buster/main armhf libsodium-dev armhf 1.0.17-1 [161 kB] Get: 82 http://deb.debian.org/debian buster/main armhf libsub-exporter-perl all 0.987-1 [47.2 kB] Get: 83 http://deb.debian.org/debian buster/main armhf libsub-override-perl all 0.09-2 [10.2 kB] Get: 84 http://deb.debian.org/debian buster/main armhf libsub-uplevel-perl all 0.2800-1 [16.3 kB] Get: 85 http://deb.debian.org/debian buster/main armhf libsys-sigaction-perl all 0.23-1 [27.4 kB] Get: 86 http://deb.debian.org/debian buster/main armhf libtest-deep-perl all 1.128-1 [48.8 kB] Get: 87 http://deb.debian.org/debian buster/main armhf libtest-exception-perl all 0.43-1 [18.7 kB] Get: 88 http://deb.debian.org/debian buster/main armhf libtest-nowarnings-perl all 1.04-2 [12.2 kB] Get: 89 http://deb.debian.org/debian buster/main armhf libtest-warnings-perl all 0.026-1 [17.9 kB] Get: 90 http://deb.debian.org/debian buster/main armhf libzmq5 armhf 4.3.1-4+deb10u1 [209 kB] Get: 91 http://deb.debian.org/debian buster/main armhf libzmq3-dev armhf 4.3.1-4+deb10u1 [425 kB] Fetched 24.0 MB in 26s (940 kB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package libbsd0:armhf. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 18932 files and directories currently installed.) Preparing to unpack .../00-libbsd0_0.9.1-2_armhf.deb ... Unpacking libbsd0:armhf (0.9.1-2) ... Selecting previously unselected package bsdmainutils. Preparing to unpack .../01-bsdmainutils_11.1.2+b1_armhf.deb ... Unpacking bsdmainutils (11.1.2+b1) ... Selecting previously unselected package libuchardet0:armhf. Preparing to unpack .../02-libuchardet0_0.0.6-3_armhf.deb ... Unpacking libuchardet0:armhf (0.0.6-3) ... Selecting previously unselected package groff-base. Preparing to unpack .../03-groff-base_1.22.4-3_armhf.deb ... Unpacking groff-base (1.22.4-3) ... Selecting previously unselected package libpipeline1:armhf. Preparing to unpack .../04-libpipeline1_1.5.1-2_armhf.deb ... Unpacking libpipeline1:armhf (1.5.1-2) ... Selecting previously unselected package man-db. Preparing to unpack .../05-man-db_2.8.5-2_armhf.deb ... Unpacking man-db (2.8.5-2) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../06-sensible-utils_0.0.12_all.deb ... Unpacking sensible-utils (0.0.12) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../07-libmagic-mgc_1%3a5.35-4+deb10u1_armhf.deb ... Unpacking libmagic-mgc (1:5.35-4+deb10u1) ... Selecting previously unselected package libmagic1:armhf. Preparing to unpack .../08-libmagic1_1%3a5.35-4+deb10u1_armhf.deb ... Unpacking libmagic1:armhf (1:5.35-4+deb10u1) ... Selecting previously unselected package file. Preparing to unpack .../09-file_1%3a5.35-4+deb10u1_armhf.deb ... Unpacking file (1:5.35-4+deb10u1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../10-gettext-base_0.19.8.1-9_armhf.deb ... Unpacking gettext-base (0.19.8.1-9) ... Selecting previously unselected package libsigsegv2:armhf. Preparing to unpack .../11-libsigsegv2_2.12-2_armhf.deb ... Unpacking libsigsegv2:armhf (2.12-2) ... Selecting previously unselected package m4. Preparing to unpack .../12-m4_1.4.18-2_armhf.deb ... Unpacking m4 (1.4.18-2) ... Selecting previously unselected package autoconf. Preparing to unpack .../13-autoconf_2.69-11_all.deb ... Unpacking autoconf (2.69-11) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../14-autotools-dev_20180224.1_all.deb ... Unpacking autotools-dev (20180224.1) ... Selecting previously unselected package automake. Preparing to unpack .../15-automake_1%3a1.16.1-4_all.deb ... Unpacking automake (1:1.16.1-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../16-autopoint_0.19.8.1-9_all.deb ... Unpacking autopoint (0.19.8.1-9) ... Selecting previously unselected package comerr-dev:armhf. Preparing to unpack .../17-comerr-dev_2.1-1.44.5-1+deb10u3_armhf.deb ... Unpacking comerr-dev:armhf (2.1-1.44.5-1+deb10u3) ... Selecting previously unselected package libtool. Preparing to unpack .../18-libtool_2.4.6-9_all.deb ... Unpacking libtool (2.4.6-9) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../19-dh-autoreconf_19_all.deb ... Unpacking dh-autoreconf (19) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../20-libarchive-zip-perl_1.64-1_all.deb ... Unpacking libarchive-zip-perl (1.64-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../21-libfile-stripnondeterminism-perl_1.1.2-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.1.2-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../22-dh-strip-nondeterminism_1.1.2-1_all.deb ... Unpacking dh-strip-nondeterminism (1.1.2-1) ... Selecting previously unselected package libelf1:armhf. Preparing to unpack .../23-libelf1_0.176-1.1_armhf.deb ... Unpacking libelf1:armhf (0.176-1.1) ... Selecting previously unselected package dwz. Preparing to unpack .../24-dwz_0.12-3_armhf.deb ... Unpacking dwz (0.12-3) ... Selecting previously unselected package libglib2.0-0:armhf. Preparing to unpack .../25-libglib2.0-0_2.58.3-2+deb10u2_armhf.deb ... Unpacking libglib2.0-0:armhf (2.58.3-2+deb10u2) ... Selecting previously unselected package libicu63:armhf. Preparing to unpack .../26-libicu63_63.1-6+deb10u1_armhf.deb ... Unpacking libicu63:armhf (63.1-6+deb10u1) ... Selecting previously unselected package libxml2:armhf. Preparing to unpack .../27-libxml2_2.9.4+dfsg1-7+b3_armhf.deb ... Unpacking libxml2:armhf (2.9.4+dfsg1-7+b3) ... Selecting previously unselected package libcroco3:armhf. Preparing to unpack .../28-libcroco3_0.6.12-3_armhf.deb ... Unpacking libcroco3:armhf (0.6.12-3) ... Selecting previously unselected package libncurses6:armhf. Preparing to unpack .../29-libncurses6_6.1+20181013-2+deb10u2_armhf.deb ... Unpacking libncurses6:armhf (6.1+20181013-2+deb10u2) ... Selecting previously unselected package gettext. Preparing to unpack .../30-gettext_0.19.8.1-9_armhf.deb ... Unpacking gettext (0.19.8.1-9) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../31-intltool-debian_0.35.0+20060710.5_all.deb ... Unpacking intltool-debian (0.35.0+20060710.5) ... Selecting previously unselected package po-debconf. Preparing to unpack .../32-po-debconf_1.0.21_all.deb ... Unpacking po-debconf (1.0.21) ... Selecting previously unselected package debhelper. Preparing to unpack .../33-debhelper_12.1.1_all.deb ... Unpacking debhelper (12.1.1) ... Selecting previously unselected package libkeyutils1:armhf. Preparing to unpack .../34-libkeyutils1_1.6-6_armhf.deb ... Unpacking libkeyutils1:armhf (1.6-6) ... Selecting previously unselected package libkrb5support0:armhf. Preparing to unpack .../35-libkrb5support0_1.17-3_armhf.deb ... Unpacking libkrb5support0:armhf (1.17-3) ... Selecting previously unselected package libk5crypto3:armhf. Preparing to unpack .../36-libk5crypto3_1.17-3_armhf.deb ... Unpacking libk5crypto3:armhf (1.17-3) ... Selecting previously unselected package libssl1.1:armhf. Preparing to unpack .../37-libssl1.1_1.1.1d-0+deb10u3_armhf.deb ... Unpacking libssl1.1:armhf (1.1.1d-0+deb10u3) ... Selecting previously unselected package libkrb5-3:armhf. Preparing to unpack .../38-libkrb5-3_1.17-3_armhf.deb ... Unpacking libkrb5-3:armhf (1.17-3) ... Selecting previously unselected package libgssapi-krb5-2:armhf. Preparing to unpack .../39-libgssapi-krb5-2_1.17-3_armhf.deb ... Unpacking libgssapi-krb5-2:armhf (1.17-3) ... Selecting previously unselected package libgssrpc4:armhf. Preparing to unpack .../40-libgssrpc4_1.17-3_armhf.deb ... Unpacking libgssrpc4:armhf (1.17-3) ... Selecting previously unselected package libkdb5-9:armhf. Preparing to unpack .../41-libkdb5-9_1.17-3_armhf.deb ... Unpacking libkdb5-9:armhf (1.17-3) ... Selecting previously unselected package libkadm5srv-mit11:armhf. Preparing to unpack .../42-libkadm5srv-mit11_1.17-3_armhf.deb ... Unpacking libkadm5srv-mit11:armhf (1.17-3) ... Selecting previously unselected package libkadm5clnt-mit11:armhf. Preparing to unpack .../43-libkadm5clnt-mit11_1.17-3_armhf.deb ... Unpacking libkadm5clnt-mit11:armhf (1.17-3) ... Selecting previously unselected package krb5-multidev:armhf. Preparing to unpack .../44-krb5-multidev_1.17-3_armhf.deb ... Unpacking krb5-multidev:armhf (1.17-3) ... Selecting previously unselected package libanyevent-perl. Preparing to unpack .../45-libanyevent-perl_7.140-3_armhf.deb ... Unpacking libanyevent-perl (7.140-3) ... Selecting previously unselected package libb-hooks-op-check-perl. Preparing to unpack .../46-libb-hooks-op-check-perl_0.22-1+b1_armhf.deb ... Unpacking libb-hooks-op-check-perl (0.22-1+b1) ... Selecting previously unselected package libdynaloader-functions-perl. Preparing to unpack .../47-libdynaloader-functions-perl_0.003-1_all.deb ... Unpacking libdynaloader-functions-perl (0.003-1) ... Selecting previously unselected package libdevel-callchecker-perl. Preparing to unpack .../48-libdevel-callchecker-perl_0.008-1_armhf.deb ... Unpacking libdevel-callchecker-perl (0.008-1) ... Selecting previously unselected package libparams-classify-perl. Preparing to unpack .../49-libparams-classify-perl_0.015-1+b1_armhf.deb ... Unpacking libparams-classify-perl (0.015-1+b1) ... Selecting previously unselected package libmodule-runtime-perl. Preparing to unpack .../50-libmodule-runtime-perl_0.016-1_all.deb ... Unpacking libmodule-runtime-perl (0.016-1) ... Selecting previously unselected package libtry-tiny-perl. Preparing to unpack .../51-libtry-tiny-perl_0.30-1_all.deb ... Unpacking libtry-tiny-perl (0.30-1) ... Selecting previously unselected package libmodule-implementation-perl. Preparing to unpack .../52-libmodule-implementation-perl_0.09-1_all.deb ... Unpacking libmodule-implementation-perl (0.09-1) ... Selecting previously unselected package libsub-exporter-progressive-perl. Preparing to unpack .../53-libsub-exporter-progressive-perl_0.001013-1_all.deb ... Unpacking libsub-exporter-progressive-perl (0.001013-1) ... Selecting previously unselected package libvariable-magic-perl. Preparing to unpack .../54-libvariable-magic-perl_0.62-1+b1_armhf.deb ... Unpacking libvariable-magic-perl (0.62-1+b1) ... Selecting previously unselected package libb-hooks-endofscope-perl. Preparing to unpack .../55-libb-hooks-endofscope-perl_0.24-1_all.deb ... Unpacking libb-hooks-endofscope-perl (0.24-1) ... Selecting previously unselected package libcapture-tiny-perl. Preparing to unpack .../56-libcapture-tiny-perl_0.48-1_all.deb ... Unpacking libcapture-tiny-perl (0.48-1) ... Selecting previously unselected package libclass-method-modifiers-perl. Preparing to unpack .../57-libclass-method-modifiers-perl_2.12-1_all.deb ... Unpacking libclass-method-modifiers-perl (2.12-1) ... Selecting previously unselected package libclass-xsaccessor-perl. Preparing to unpack .../58-libclass-xsaccessor-perl_1.19-3+b2_armhf.deb ... Unpacking libclass-xsaccessor-perl (1.19-3+b2) ... Selecting previously unselected package libparams-util-perl. Preparing to unpack .../59-libparams-util-perl_1.07-3+b4_armhf.deb ... Unpacking libparams-util-perl (1.07-3+b4) ... Selecting previously unselected package libsub-install-perl. Preparing to unpack .../60-libsub-install-perl_0.928-1_all.deb ... Unpacking libsub-install-perl (0.928-1) ... Selecting previously unselected package libdata-optlist-perl. Preparing to unpack .../61-libdata-optlist-perl_0.110-1_all.deb ... Unpacking libdata-optlist-perl (0.110-1) ... Selecting previously unselected package libdevel-globaldestruction-perl. Preparing to unpack .../62-libdevel-globaldestruction-perl_0.14-1_all.deb ... Unpacking libdevel-globaldestruction-perl (0.14-1) ... Selecting previously unselected package libffi-checklib-perl. Preparing to unpack .../63-libffi-checklib-perl_0.23-1_all.deb ... Unpacking libffi-checklib-perl (0.23-1) ... Selecting previously unselected package libffi-platypus-perl. Preparing to unpack .../64-libffi-platypus-perl_0.83-1_armhf.deb ... Unpacking libffi-platypus-perl (0.83-1) ... Selecting previously unselected package libimport-into-perl. Preparing to unpack .../65-libimport-into-perl_1.002005-1_all.deb ... Unpacking libimport-into-perl (1.002005-1) ... Selecting previously unselected package libkrb5-dev:armhf. Preparing to unpack .../66-libkrb5-dev_1.17-3_armhf.deb ... Unpacking libkrb5-dev:armhf (1.17-3) ... Selecting previously unselected package librole-tiny-perl. Preparing to unpack .../67-librole-tiny-perl_2.000006-1_all.deb ... Unpacking librole-tiny-perl (2.000006-1) ... Selecting previously unselected package libstrictures-perl. Preparing to unpack .../68-libstrictures-perl_2.000005-1_all.deb ... Unpacking libstrictures-perl (2.000005-1) ... Selecting previously unselected package libsub-quote-perl. Preparing to unpack .../69-libsub-quote-perl_2.005001-1_all.deb ... Unpacking libsub-quote-perl (2.005001-1) ... Selecting previously unselected package libmoo-perl. Preparing to unpack .../70-libmoo-perl_2.003004-2_all.deb ... Unpacking libmoo-perl (2.003004-2) ... Selecting previously unselected package libpackage-stash-perl. Preparing to unpack .../71-libpackage-stash-perl_0.38-1_all.deb ... Unpacking libpackage-stash-perl (0.38-1) ... Selecting previously unselected package libsub-identify-perl. Preparing to unpack .../72-libsub-identify-perl_0.14-1+b1_armhf.deb ... Unpacking libsub-identify-perl (0.14-1+b1) ... Selecting previously unselected package libsub-name-perl. Preparing to unpack .../73-libsub-name-perl_0.21-1+b3_armhf.deb ... Unpacking libsub-name-perl (0.21-1+b3) ... Selecting previously unselected package libnamespace-clean-perl. Preparing to unpack .../74-libnamespace-clean-perl_0.27-1_all.deb ... Unpacking libnamespace-clean-perl (0.27-1) ... Selecting previously unselected package libnorm1:armhf. Preparing to unpack .../75-libnorm1_1.5.8+dfsg2-1_armhf.deb ... Unpacking libnorm1:armhf (1.5.8+dfsg2-1) ... Selecting previously unselected package libnorm-dev:armhf. Preparing to unpack .../76-libnorm-dev_1.5.8+dfsg2-1_armhf.deb ... Unpacking libnorm-dev:armhf (1.5.8+dfsg2-1) ... Selecting previously unselected package libpgm-5.2-0:armhf. Preparing to unpack .../77-libpgm-5.2-0_5.2.122~dfsg-3_armhf.deb ... Unpacking libpgm-5.2-0:armhf (5.2.122~dfsg-3) ... Selecting previously unselected package libpgm-dev:armhf. Preparing to unpack .../78-libpgm-dev_5.2.122~dfsg-3_armhf.deb ... Unpacking libpgm-dev:armhf (5.2.122~dfsg-3) ... Selecting previously unselected package libsodium23:armhf. Preparing to unpack .../79-libsodium23_1.0.17-1_armhf.deb ... Unpacking libsodium23:armhf (1.0.17-1) ... Selecting previously unselected package libsodium-dev:armhf. Preparing to unpack .../80-libsodium-dev_1.0.17-1_armhf.deb ... Unpacking libsodium-dev:armhf (1.0.17-1) ... Selecting previously unselected package libsub-exporter-perl. Preparing to unpack .../81-libsub-exporter-perl_0.987-1_all.deb ... Unpacking libsub-exporter-perl (0.987-1) ... Selecting previously unselected package libsub-override-perl. Preparing to unpack .../82-libsub-override-perl_0.09-2_all.deb ... Unpacking libsub-override-perl (0.09-2) ... Selecting previously unselected package libsub-uplevel-perl. Preparing to unpack .../83-libsub-uplevel-perl_0.2800-1_all.deb ... Unpacking libsub-uplevel-perl (0.2800-1) ... Selecting previously unselected package libsys-sigaction-perl. Preparing to unpack .../84-libsys-sigaction-perl_0.23-1_all.deb ... Unpacking libsys-sigaction-perl (0.23-1) ... Selecting previously unselected package libtest-deep-perl. Preparing to unpack .../85-libtest-deep-perl_1.128-1_all.deb ... Unpacking libtest-deep-perl (1.128-1) ... Selecting previously unselected package libtest-exception-perl. Preparing to unpack .../86-libtest-exception-perl_0.43-1_all.deb ... Unpacking libtest-exception-perl (0.43-1) ... Selecting previously unselected package libtest-nowarnings-perl. Preparing to unpack .../87-libtest-nowarnings-perl_1.04-2_all.deb ... Unpacking libtest-nowarnings-perl (1.04-2) ... Selecting previously unselected package libtest-warnings-perl. Preparing to unpack .../88-libtest-warnings-perl_0.026-1_all.deb ... Unpacking libtest-warnings-perl (0.026-1) ... Selecting previously unselected package libzmq5:armhf. Preparing to unpack .../89-libzmq5_4.3.1-4+deb10u1_armhf.deb ... Unpacking libzmq5:armhf (4.3.1-4+deb10u1) ... Selecting previously unselected package libzmq3-dev:armhf. Preparing to unpack .../90-libzmq3-dev_4.3.1-4+deb10u1_armhf.deb ... Unpacking libzmq3-dev:armhf (4.3.1-4+deb10u1) ... Setting up libanyevent-perl (7.140-3) ... Setting up libpipeline1:armhf (1.5.1-2) ... Setting up libkeyutils1:armhf (1.6-6) ... Setting up libsodium23:armhf (1.0.17-1) ... Setting up libdynaloader-functions-perl (0.003-1) ... Setting up libtest-deep-perl (1.128-1) ... Setting up libclass-method-modifiers-perl (2.12-1) ... Setting up libmagic-mgc (1:5.35-4+deb10u1) ... Setting up libarchive-zip-perl (1.64-1) ... Setting up libsub-identify-perl (0.14-1+b1) ... Setting up libglib2.0-0:armhf (2.58.3-2+deb10u2) ... No schema files found: doing nothing. Setting up libssl1.1:armhf (1.1.1d-0+deb10u3) ... Setting up libnorm1:armhf (1.5.8+dfsg2-1) ... Setting up libtry-tiny-perl (0.30-1) ... Setting up libmagic1:armhf (1:5.35-4+deb10u1) ... Setting up libtest-warnings-perl (0.026-1) ... Setting up libnorm-dev:armhf (1.5.8+dfsg2-1) ... Setting up gettext-base (0.19.8.1-9) ... Setting up file (1:5.35-4+deb10u1) ... Setting up libtest-nowarnings-perl (1.04-2) ... Setting up libicu63:armhf (63.1-6+deb10u1) ... Setting up libsub-install-perl (0.928-1) ... Setting up libkrb5support0:armhf (1.17-3) ... Setting up autotools-dev (20180224.1) ... Setting up libffi-checklib-perl (0.23-1) ... Setting up libncurses6:armhf (6.1+20181013-2+deb10u2) ... Setting up libsigsegv2:armhf (2.12-2) ... Setting up comerr-dev:armhf (2.1-1.44.5-1+deb10u3) ... Setting up libvariable-magic-perl (0.62-1+b1) ... Setting up autopoint (0.19.8.1-9) ... Setting up libb-hooks-op-check-perl (0.22-1+b1) ... Setting up libsodium-dev:armhf (1.0.17-1) ... Setting up libk5crypto3:armhf (1.17-3) ... Setting up libparams-util-perl (1.07-3+b4) ... Setting up libsub-exporter-progressive-perl (0.001013-1) ... Setting up libcapture-tiny-perl (0.48-1) ... Setting up libsub-name-perl (0.21-1+b3) ... Setting up sensible-utils (0.0.12) ... Setting up libuchardet0:armhf (0.0.6-3) ... Setting up librole-tiny-perl (2.000006-1) ... Setting up libsub-uplevel-perl (0.2800-1) ... Setting up libsub-override-perl (0.09-2) ... Setting up libdevel-globaldestruction-perl (0.14-1) ... Setting up libstrictures-perl (2.000005-1) ... Setting up libsub-quote-perl (2.005001-1) ... Setting up libclass-xsaccessor-perl (1.19-3+b2) ... Setting up libkrb5-3:armhf (1.17-3) ... Setting up libsys-sigaction-perl (0.23-1) ... Setting up libbsd0:armhf (0.9.1-2) ... Setting up libelf1:armhf (0.176-1.1) ... Setting up libxml2:armhf (2.9.4+dfsg1-7+b3) ... Setting up libpgm-5.2-0:armhf (5.2.122~dfsg-3) ... Setting up libffi-platypus-perl (0.83-1) ... Setting up libfile-stripnondeterminism-perl (1.1.2-1) ... Setting up libtool (2.4.6-9) ... Setting up m4 (1.4.18-2) ... Setting up libdevel-callchecker-perl (0.008-1) ... Setting up libtest-exception-perl (0.43-1) ... Setting up libpgm-dev:armhf (5.2.122~dfsg-3) ... Setting up bsdmainutils (11.1.2+b1) ... update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode Setting up libgssapi-krb5-2:armhf (1.17-3) ... Setting up libdata-optlist-perl (0.110-1) ... Setting up libcroco3:armhf (0.6.12-3) ... Setting up autoconf (2.69-11) ... Setting up dwz (0.12-3) ... Setting up groff-base (1.22.4-3) ... Setting up libsub-exporter-perl (0.987-1) ... Setting up automake (1:1.16.1-4) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up gettext (0.19.8.1-9) ... Setting up libzmq5:armhf (4.3.1-4+deb10u1) ... Setting up libparams-classify-perl (0.015-1+b1) ... Setting up man-db (2.8.5-2) ... Not building database; man-db/auto-update is not 'true'. Setting up intltool-debian (0.35.0+20060710.5) ... Setting up libgssrpc4:armhf (1.17-3) ... Setting up libmodule-runtime-perl (0.016-1) ... Setting up libkdb5-9:armhf (1.17-3) ... Setting up libkadm5srv-mit11:armhf (1.17-3) ... Setting up libkadm5clnt-mit11:armhf (1.17-3) ... Setting up libmodule-implementation-perl (0.09-1) ... Setting up libpackage-stash-perl (0.38-1) ... Setting up libimport-into-perl (1.002005-1) ... Setting up libmoo-perl (2.003004-2) ... Setting up po-debconf (1.0.21) ... Setting up libb-hooks-endofscope-perl (0.24-1) ... Setting up krb5-multidev:armhf (1.17-3) ... Setting up libkrb5-dev:armhf (1.17-3) ... Setting up libnamespace-clean-perl (0.27-1) ... Setting up libzmq3-dev:armhf (4.3.1-4+deb10u1) ... Setting up debhelper (12.1.1) ... Setting up dh-autoreconf (19) ... Setting up dh-strip-nondeterminism (1.1.2-1) ... Processing triggers for libc-bin (2.28-10) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.23-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/libzmq-ffi-perl-1.11/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b dpkg-buildpackage: info: source package libzmq-ffi-perl dpkg-buildpackage: info: source version 1.11-2 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by gregor herrmann dpkg-source --before-build . dpkg-buildpackage: info: host architecture armhf fakeroot debian/rules clean dh clean dh_clean debian/rules build dh build dh_update_autotools_config dh_auto_configure perl -I. Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -ffile-prefix-map=/build/libzmq-ffi-perl-1.11=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2" "LD=arm-linux-gnueabihf-gcc -g -O2 -ffile-prefix-map=/build/libzmq-ffi-perl-1.11=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for ZMQ::FFI Writing MYMETA.yml and MYMETA.json dh_auto_build make -j1 make[1]: Entering directory '/build/libzmq-ffi-perl-1.11' cp lib/ZMQ/FFI/ContextRole.pm blib/lib/ZMQ/FFI/ContextRole.pm cp lib/ZMQ/FFI/SocketRole.pm blib/lib/ZMQ/FFI/SocketRole.pm cp lib/ZMQ/FFI/ZMQ3/Socket.pm blib/lib/ZMQ/FFI/ZMQ3/Socket.pm cp lib/ZMQ/FFI/Util.pm blib/lib/ZMQ/FFI/Util.pm cp lib/ZMQ/FFI/Versioner.pm blib/lib/ZMQ/FFI/Versioner.pm cp lib/ZMQ/FFI/ErrorHelper.pm blib/lib/ZMQ/FFI/ErrorHelper.pm cp lib/ZMQ/FFI/ZMQ2/Context.pm blib/lib/ZMQ/FFI/ZMQ2/Context.pm cp lib/ZMQ/FFI.pm blib/lib/ZMQ/FFI.pm cp lib/ZMQ/FFI/Constants.pm blib/lib/ZMQ/FFI/Constants.pm cp lib/ZMQ/FFI/ZMQ3/Context.pm blib/lib/ZMQ/FFI/ZMQ3/Context.pm cp lib/ZMQ/FFI/ZMQ2/Socket.pm blib/lib/ZMQ/FFI/ZMQ2/Socket.pm Manifying 11 pod documents make[1]: Leaving directory '/build/libzmq-ffi-perl-1.11' dh_auto_test make -j1 test TEST_VERBOSE=1 make[1]: Entering directory '/build/libzmq-ffi-perl-1.11' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/close.t .......... # Subtest: close with unsent messages ok 1 - implicit Socket close done correctly (ctx destruction does not hang) 1..1 ok 1 - close with unsent messages ok 2 - no (unexpected) warnings (via done_testing) 1..2 ok t/closed_socket.t .. ok 1 - got warnings for operations on closed socket ok 2 - no (unexpected) warnings (via done_testing) 1..2 ok t/device.t ......... ok 1 - zmq_device version error for zmq >= 3.x # Subtest: device 1..0 # SKIP zmq_device not available in zmq >= 3.x ok 2 # skip zmq_device not available in zmq >= 3.x ok 3 - no (unexpected) warnings (via done_testing) 1..3 ok t/errors.t ......... # Subtest: socket errors ok 1 - invalid socket type dies with EINVAL ok 2 - invalid endpoint dies with EINVAL 1..2 ok 1 - socket errors # Subtest: util errors ok 1 - zmq_soname dies when die => 1 and FFI::Platypus->function fails ok 2 ok 3 - zmq_soname lives and returns undef when die => 0 and FFI::Platypus->function fails 1..3 ok 2 - util errors # Subtest: fatal socket error ok 1 - socket error on send dies with zmq_send error message 1..1 ok 3 - fatal socket error # Subtest: socket recv error && die_on_error => false ok 1 - has_error false before recv error ok 2 - recv error isn't fatal if die_on_error false ok 3 - has_error true after error ok 4 - last_errno set to error code of last error ok 5 - last_strerror set to error string of last error ok 6 - recv error fatal again after die_on_error set back to true 1..6 ok 4 - socket recv error && die_on_error => false # Subtest: socket send error && die_on_error => false ok 1 - has_error false before send error ok 2 - send error isn't fatal if die_on_error false ok 3 - has_error true after error ok 4 - last_errno set to error code of last error ok 5 - last_strerror set to error string of last error ok 6 - send error fatal again after die_on_error set back to true 1..6 ok 5 - socket send error && die_on_error => false # Subtest: socket recv_multipart error && die_on_error => false ok 1 - has_error false before recv_multipart error ok 2 - recv_multipart error isn't fatal if die_on_error false ok 3 - has_error true after error ok 4 - last_errno set to error code of last error ok 5 - last_strerror set to error string of last error ok 6 - recv_multipart error fatal again after die_on_error set back to true 1..6 ok 6 - socket recv_multipart error && die_on_error => false # Subtest: socket send_multipart error && die_on_error => false ok 1 - has_error false before send_multipart error ok 2 - send_multipart error isn't fatal if die_on_error false ok 3 - has_error true after error ok 4 - last_errno set to error code of last error ok 5 - last_strerror set to error string of last error ok 6 - send_multipart error fatal again after die_on_error set back to true 1..6 ok 7 - socket send_multipart error && die_on_error => false ok 8 - no (unexpected) warnings (via done_testing) 1..8 ok t/fd.t ............. ok 1 - got message 0 ok 2 - got message 1 ok 3 - got message 2 ok 4 - no (unexpected) warnings (via done_testing) 1..4 ok t/fork-01.t ........ ok 1 - child process skipped parent ctx/socket cleanup ok 2 - parent context pid _should_ match parent pid ok 3 - parent socket pid _should_ match parent pid ok 4 - parent socket closed in parent ok 5 - parent context destroyed in parent ok 6 - no (unexpected) warnings (via done_testing) 1..6 ok t/fork-02.t ........ ok 1 - child process did child ctx/socket cleanup ok 2 - parent context pid _should_ match parent pid ok 3 - parent socket pid _should_ match parent pid ok 4 - parent socket closed in parent ok 5 - parent context destroyed in parent ok 6 - no (unexpected) warnings (via done_testing) 1..6 ok t/gc.t ............. ok 1 - sockets closed before context destroyed ok 2 - no (unexpected) warnings (via done_testing) 1..2 ok t/linger.t ......... ok 1 - got default linger ok 2 - linger is 42 after set ok 3 - no (unexpected) warnings (via done_testing) 1..3 ok t/multipart.t ...... # Subtest: multipart send/recv ok 1 - got dealer ident and message 1..1 ok 1 - multipart send/recv # Subtest: multipart flags ok 1 - $flags == ZMQ_SNDMORE | ZMQ_DONTWAIT ok 2 - $flags == ZMQ_SNDMORE | ZMQ_DONTWAIT ok 3 - $flags == ZMQ_DONTWAIT 1..3 ok 2 - multipart flags ok 3 - no (unexpected) warnings (via done_testing) 1..3 ok t/options.t ........ # Subtest: ctx version ok 1 - util version and ctx version match 1..1 ok 1 - ctx version # Subtest: ctx options ok 1 - threads set to 42 ok 2 - max sockets set to 42 ok 3 - threads set to 1 ok 4 - max sockets set to 1024 1..4 ok 2 - ctx options # Subtest: convenience options ok 1 - got default linger ok 2 - set linger ok 3 - got default identity ok 4 - set identity 1..4 ok 3 - convenience options # Subtest: string options ok 1 - got last endpoint ok 2 - setting/getting zmq4 string opt works 1..2 ok 4 - string options # Subtest: binary options ok 1 - set long identity 1..1 ok 5 - binary options # Subtest: uint64_t options ok 1 - set/got max unsigned 64 bit int option value 1..1 ok 6 - uint64_t options # Subtest: int64_t options ok 1 - set/got max signed 64 bit int option value 1..1 ok 7 - int64_t options ok 8 - no (unexpected) warnings (via done_testing) 1..8 ok t/proxy.t .......... # Subtest: proxy ok 1 - Message received 1..1 ok 1 - proxy ok 2 - no (unexpected) warnings (via done_testing) 1..2 ok t/pubsub.t ......... # Subtest: pubsub ok 1 - got msg sent to all topics ok 2 - got msg sent to mytopic 1..2 ok 1 - pubsub ok 2 - no (unexpected) warnings (via done_testing) 1..2 ok t/router-req.t ..... # Subtest: router-req ok 1 - Null is really null ok 2 - Message received ok 3 - Message received by client 1..3 ok 1 - router-req ok 2 - no (unexpected) warnings (via done_testing) 1..2 ok t/send_recv.t ...... ok 1 - received message ok 2 - s1 socket ptr set to -1 after explicit close ok 3 - s2 socket ptr set to -1 after explicit close ok 4 - ctx ptr set to -1 after explicit destroy ok 5 - no (unexpected) warnings (via done_testing) 1..5 ok t/threads.t ........ 1..31 ok 1 - got child thread identity 'worker-1' ok 2 - got child thread 'worker-1' hello message ok 3 - got child thread identity 'worker-2' ok 4 - got child thread 'worker-2' hello message ok 5 - got child thread identity 'worker-3' ok 6 - got child thread 'worker-3' hello message ok 7 - got child thread identity 'worker-4' ok 8 - got child thread 'worker-4' hello message ok 9 - got child thread identity 'worker-7' ok 10 - got child thread 'worker-7' hello message ok 11 - got child thread identity 'worker-6' ok 12 - got child thread 'worker-6' hello message ok 13 - got child thread identity 'worker-9' ok 14 - got child thread 'worker-9' hello message ok 15 - got child thread identity 'worker-8' ok 16 - got child thread 'worker-8' hello message ok 17 - got child thread identity 'worker-5' ok 18 - got child thread 'worker-5' hello message ok 19 - got child thread identity 'worker-10' ok 20 - got child thread 'worker-10' hello message ok 21 - 'worker-1' got parent thread goodbye message ok 22 - 'worker-2' got parent thread goodbye message ok 23 - 'worker-3' got parent thread goodbye message ok 24 - 'worker-4' got parent thread goodbye message ok 25 - 'worker-5' got parent thread goodbye message ok 26 - 'worker-6' got parent thread goodbye message ok 27 - 'worker-7' got parent thread goodbye message ok 28 - 'worker-8' got parent thread goodbye message ok 29 - 'worker-9' got parent thread goodbye message ok 30 - 'worker-10' got parent thread goodbye message ok 31 - no warnings ok t/unbind.t ......... ok 1 - first disconnect lives ok 2 - first unbind lives ok 3 - second disconnect dies ok 4 - second unbind dies ok 5 - no (unexpected) warnings (via done_testing) 1..5 ok t/unicode.t ........ # Subtest: send_unicode_bytes ok 1 - created unicode message ok 2 - byte length matches ok 3 - bytes match 1..3 ok 1 - send_unicode_bytes # Subtest: send_multipart_unicode_bytes ok 1 - created unicode message parts ok 2 - byte length matches ok 3 - bytes match 1..3 ok 2 - send_multipart_unicode_bytes ok 3 - no (unexpected) warnings (via done_testing) 1..3 ok All tests successful. Files=18, Tests=97, 51 wallclock secs ( 0.34 usr 0.16 sys + 47.46 cusr 4.82 csys = 52.78 CPU) Result: PASS make[1]: Leaving directory '/build/libzmq-ffi-perl-1.11' fakeroot debian/rules binary dh binary dh_testroot dh_prep debian/rules override_dh_auto_install make[1]: Entering directory '/build/libzmq-ffi-perl-1.11' dh_auto_install make -j1 install DESTDIR=/build/libzmq-ffi-perl-1.11/debian/libzmq-ffi-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[2]: Entering directory '/build/libzmq-ffi-perl-1.11' Manifying 11 pod documents Installing /build/libzmq-ffi-perl-1.11/debian/libzmq-ffi-perl/usr/share/perl5/ZMQ/FFI.pm Installing /build/libzmq-ffi-perl-1.11/debian/libzmq-ffi-perl/usr/share/perl5/ZMQ/FFI/ErrorHelper.pm Installing /build/libzmq-ffi-perl-1.11/debian/libzmq-ffi-perl/usr/share/perl5/ZMQ/FFI/Util.pm Installing /build/libzmq-ffi-perl-1.11/debian/libzmq-ffi-perl/usr/share/perl5/ZMQ/FFI/ContextRole.pm Installing /build/libzmq-ffi-perl-1.11/debian/libzmq-ffi-perl/usr/share/perl5/ZMQ/FFI/Constants.pm Installing /build/libzmq-ffi-perl-1.11/debian/libzmq-ffi-perl/usr/share/perl5/ZMQ/FFI/Versioner.pm Installing /build/libzmq-ffi-perl-1.11/debian/libzmq-ffi-perl/usr/share/perl5/ZMQ/FFI/SocketRole.pm Installing /build/libzmq-ffi-perl-1.11/debian/libzmq-ffi-perl/usr/share/perl5/ZMQ/FFI/ZMQ3/Context.pm Installing /build/libzmq-ffi-perl-1.11/debian/libzmq-ffi-perl/usr/share/perl5/ZMQ/FFI/ZMQ3/Socket.pm Installing /build/libzmq-ffi-perl-1.11/debian/libzmq-ffi-perl/usr/share/perl5/ZMQ/FFI/ZMQ2/Context.pm Installing /build/libzmq-ffi-perl-1.11/debian/libzmq-ffi-perl/usr/share/perl5/ZMQ/FFI/ZMQ2/Socket.pm Installing /build/libzmq-ffi-perl-1.11/debian/libzmq-ffi-perl/usr/share/man/man3/ZMQ::FFI::SocketRole.3pm Installing /build/libzmq-ffi-perl-1.11/debian/libzmq-ffi-perl/usr/share/man/man3/ZMQ::FFI::ZMQ3::Context.3pm Installing /build/libzmq-ffi-perl-1.11/debian/libzmq-ffi-perl/usr/share/man/man3/ZMQ::FFI::ZMQ2::Context.3pm Installing /build/libzmq-ffi-perl-1.11/debian/libzmq-ffi-perl/usr/share/man/man3/ZMQ::FFI::Util.3pm Installing /build/libzmq-ffi-perl-1.11/debian/libzmq-ffi-perl/usr/share/man/man3/ZMQ::FFI.3pm Installing /build/libzmq-ffi-perl-1.11/debian/libzmq-ffi-perl/usr/share/man/man3/ZMQ::FFI::ZMQ2::Socket.3pm Installing /build/libzmq-ffi-perl-1.11/debian/libzmq-ffi-perl/usr/share/man/man3/ZMQ::FFI::ZMQ3::Socket.3pm Installing /build/libzmq-ffi-perl-1.11/debian/libzmq-ffi-perl/usr/share/man/man3/ZMQ::FFI::Constants.3pm Installing /build/libzmq-ffi-perl-1.11/debian/libzmq-ffi-perl/usr/share/man/man3/ZMQ::FFI::ErrorHelper.3pm Installing /build/libzmq-ffi-perl-1.11/debian/libzmq-ffi-perl/usr/share/man/man3/ZMQ::FFI::ContextRole.3pm Installing /build/libzmq-ffi-perl-1.11/debian/libzmq-ffi-perl/usr/share/man/man3/ZMQ::FFI::Versioner.3pm make[2]: Leaving directory '/build/libzmq-ffi-perl-1.11' # remove empty manpages for M in \ ContextRole \ ErrorHelper \ SocketRole \ Versioner \ ZMQ2::Context \ ZMQ2::Socket \ ZMQ3::Context \ ZMQ3::Socket \ ; do \ rm -f -v /build/libzmq-ffi-perl-1.11/debian/libzmq-ffi-perl/usr/share/man/man3/ZMQ::FFI::$M.3pm ; \ done removed '/build/libzmq-ffi-perl-1.11/debian/libzmq-ffi-perl/usr/share/man/man3/ZMQ::FFI::ContextRole.3pm' removed '/build/libzmq-ffi-perl-1.11/debian/libzmq-ffi-perl/usr/share/man/man3/ZMQ::FFI::ErrorHelper.3pm' removed '/build/libzmq-ffi-perl-1.11/debian/libzmq-ffi-perl/usr/share/man/man3/ZMQ::FFI::SocketRole.3pm' removed '/build/libzmq-ffi-perl-1.11/debian/libzmq-ffi-perl/usr/share/man/man3/ZMQ::FFI::Versioner.3pm' removed '/build/libzmq-ffi-perl-1.11/debian/libzmq-ffi-perl/usr/share/man/man3/ZMQ::FFI::ZMQ2::Context.3pm' removed '/build/libzmq-ffi-perl-1.11/debian/libzmq-ffi-perl/usr/share/man/man3/ZMQ::FFI::ZMQ2::Socket.3pm' removed '/build/libzmq-ffi-perl-1.11/debian/libzmq-ffi-perl/usr/share/man/man3/ZMQ::FFI::ZMQ3::Context.3pm' removed '/build/libzmq-ffi-perl-1.11/debian/libzmq-ffi-perl/usr/share/man/man3/ZMQ::FFI::ZMQ3::Socket.3pm' make[1]: Leaving directory '/build/libzmq-ffi-perl-1.11' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libzmq-ffi-perl' in '../libzmq-ffi-perl_1.11-2_all.deb'. dpkg-genbuildinfo --build=binary dpkg-genchanges --build=binary >../libzmq-ffi-perl_1.11-2_armhf.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/22654 and its subdirectories I: Current time: Thu May 28 18:26:33 -12 2020 I: pbuilder-time-stamp: 1590733593 Fri May 29 06:26:40 UTC 2020 I: 1st build successful. Starting 2nd build on remote node ff2a-armhf-rb.debian.net. Fri May 29 06:26:40 UTC 2020 I: Preparing to do remote build '2' on ff2a-armhf-rb.debian.net. Fri May 29 06:28:55 UTC 2020 I: Deleting $TMPDIR on ff2a-armhf-rb.debian.net. Fri May 29 06:28:57 UTC 2020 I: libzmq-ffi-perl_1.11-2_armhf.changes: Format: 1.8 Date: Fri, 16 Sep 2016 21:53:55 +0200 Source: libzmq-ffi-perl Binary: libzmq-ffi-perl Architecture: all Version: 1.11-2 Distribution: unstable Urgency: medium Maintainer: Debian Perl Group Changed-By: gregor herrmann Description: libzmq-ffi-perl - version agnostic Perl bindings for zeromq using ffi Closes: 835412 Changes: libzmq-ffi-perl (1.11-2) unstable; urgency=medium . * Add patch from upstream Git to fix occasional hangs in t/proxy.t. (Closes: #835412) Checksums-Sha1: 055fbf047636da065069b08bb2fa6f56fdc31e7e 27268 libzmq-ffi-perl_1.11-2_all.deb 85c9fbdb98ff8f0718c8beb793767fe939ee1aac 6253 libzmq-ffi-perl_1.11-2_armhf.buildinfo Checksums-Sha256: e2e985105f0691bb336b695af6ae3152b9be8917a803df0fdabb05278b8b842c 27268 libzmq-ffi-perl_1.11-2_all.deb d32824546c93e7ad1ff4fe6744a4ee97aa61afb5c17e74a989c735c54862bac6 6253 libzmq-ffi-perl_1.11-2_armhf.buildinfo Files: 87827b346f023a65ad50f3b6485c835e 27268 perl optional libzmq-ffi-perl_1.11-2_all.deb 931201009996c02c3fe72c00b6d8c760 6253 perl optional libzmq-ffi-perl_1.11-2_armhf.buildinfo Fri May 29 06:28:59 UTC 2020 I: diffoscope 145 will be used to compare the two builds: # Profiling output for: /usr/bin/diffoscope --html /srv/reproducible-results/rbuild-debian/tmp.hlaQsD8k2w/libzmq-ffi-perl_1.11-2.diffoscope.html --text /srv/reproducible-results/rbuild-debian/tmp.hlaQsD8k2w/libzmq-ffi-perl_1.11-2.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/tmp.hlaQsD8k2w/libzmq-ffi-perl_1.11-2.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/tmp.hlaQsD8k2w/b1/libzmq-ffi-perl_1.11-2_armhf.changes /srv/reproducible-results/rbuild-debian/tmp.hlaQsD8k2w/b2/libzmq-ffi-perl_1.11-2_armhf.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.202s) 0.202s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.020s) 0.020s 10 calls diffoscope.comparators.binary.FilesystemFile Fri May 29 06:29:01 UTC 2020 I: diffoscope 145 found no differences in the changes files, and a .buildinfo file also exists. Fri May 29 06:29:01 UTC 2020 I: libzmq-ffi-perl from buster built successfully and reproducibly on armhf. Fri May 29 06:29:03 UTC 2020 I: Submitting .buildinfo files to external archives: Fri May 29 06:29:03 UTC 2020 I: Submitting 8.0K b1/libzmq-ffi-perl_1.11-2_armhf.buildinfo.asc Fri May 29 06:29:03 UTC 2020 I: Submitting 8.0K b2/libzmq-ffi-perl_1.11-2_armhf.buildinfo.asc Fri May 29 06:29:04 UTC 2020 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Fri May 29 06:29:04 UTC 2020 I: Done submitting .buildinfo files. Fri May 29 06:29:04 UTC 2020 I: Removing signed libzmq-ffi-perl_1.11-2_armhf.buildinfo.asc files: removed './b1/libzmq-ffi-perl_1.11-2_armhf.buildinfo.asc' removed './b2/libzmq-ffi-perl_1.11-2_armhf.buildinfo.asc'