Fri May 29 03:51:40 UTC 2020 I: starting to build libtest-abortable-perl/buster/armhf on jenkins on '2020-05-29 03:51' Fri May 29 03:51:40 UTC 2020 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/armhf_35/3307/console.log Fri May 29 03:51:40 UTC 2020 I: Downloading source for buster/libtest-abortable-perl=0.002-1 --2020-05-29 03:51:41-- http://deb.debian.org/debian/pool/main/libt/libtest-abortable-perl/libtest-abortable-perl_0.002-1.dsc Connecting to 78.137.99.97:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2356 (2.3K) Saving to: ‘libtest-abortable-perl_0.002-1.dsc’ 0K .. 100% 87.2M=0s 2020-05-29 03:51:41 (87.2 MB/s) - ‘libtest-abortable-perl_0.002-1.dsc’ saved [2356/2356] Fri May 29 03:51:41 UTC 2020 I: libtest-abortable-perl_0.002-1.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: libtest-abortable-perl Binary: libtest-abortable-perl Architecture: all Version: 0.002-1 Maintainer: Debian Perl Group Uploaders: gregor herrmann Homepage: https://metacpan.org/release/Test-Abortable Standards-Version: 3.9.8 Vcs-Browser: https://anonscm.debian.org/cgit/pkg-perl/packages/libtest-abortable-perl.git Vcs-Git: https://anonscm.debian.org/git/pkg-perl/packages/libtest-abortable-perl.git Testsuite: autopkgtest-pkg-perl Build-Depends: debhelper (>= 9) Build-Depends-Indep: libsub-exporter-perl, libtest-needs-perl, libtest-simple-perl (>= 1.302075), perl Package-List: libtest-abortable-perl deb perl optional arch=all Checksums-Sha1: 82ba6c3e254706c2e8151b55a5e280c28e866579 18445 libtest-abortable-perl_0.002.orig.tar.gz bb833ecff4c510f10adf0d5986ecbadfb6faa324 1660 libtest-abortable-perl_0.002-1.debian.tar.xz Checksums-Sha256: 9790b7f9b97698ea2c530436c6090c25119c6f5bd2f70d78afc49922c3f0276d 18445 libtest-abortable-perl_0.002.orig.tar.gz 5c3132029427cb5bdb43e3f2e63d376d6da4b3d5eaf4fa2c9a1941c6bf783322 1660 libtest-abortable-perl_0.002-1.debian.tar.xz Files: 649c8b676040bef3dbd8721d26e99bab 18445 libtest-abortable-perl_0.002.orig.tar.gz 94b048e695455765a42b3259476dd1a1 1660 libtest-abortable-perl_0.002-1.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQKTBAEBCgB9FiEE0eExbpOnYKgQTYX6uzpoAYZJqgYFAliYl+FfFIAAAAAALgAo aXNzdWVyLWZwckBub3RhdGlvbnMub3BlbnBncC5maWZ0aGhvcnNlbWFuLm5ldEQx RTEzMTZFOTNBNzYwQTgxMDREODVGQUJCM0E2ODAxODY0OUFBMDYACgkQuzpoAYZJ qgYyshAAi9+OrDQdxDWUMVgQnHnJNkQyOIt58tZ1Yz7CX1OZbq96ltO6tG0G5M6R Rq8IcU4K2Igbqzu7mulH+0/EBL9U9Rj6Ek3BvHm5A2WuQAZCXI7VRHj0FFwbalaH L01yTn2OG3sPM+jjNuzJmGwDW4qhlIyXQWLbw0yvrVsawF1DZ/PTrSaYDCJic9IH 0uWwSO44NFvWbtdKOfe+fZySShGK+HNcKkRZ20L1OYfuB0qETx2TeqSdYEc+vZa1 XTAoKBi5wvM2c6+f4Bd5mxXV8L8cKCR7P6O1q1aCMIdcGa23ZhepKb+lKf9BtQtH T6gI6a4xDHMHXJ4LUzQ8GsRojCS+7bUd18LBN9O58EwKIoVhbZLHdgli9en+skSG UloWnyY7mAg5v5DX0Ly6XlOueVxs4SdgQLsq/Y0t6azP6ddGnP5OKCo/gcT/6Ml6 5Af/BM1HbsZPaEYbFuIxeKlo+TFPMsNWHvbWsC33P/+b6LMInKNSICKLnL2UqqFh O8EYueImYa1nsjjZKoRh17gVOOOksnXJBjNL2HRIfIoHVXxp948eONnJ5es84DZi 4HvzRFVVGdCTXWJeoAocId8HuIbV3GQWMJptyQyr5U3qkh4Wlyi3aNLBhWHA8JQ+ EysBoOnMuNqfqVpHh19OXX0jtsIa6FPFXzh/0OVLwrXx6jC8oDk= =IVbU -----END PGP SIGNATURE----- Fri May 29 03:51:41 UTC 2020 I: Checking whether the package is not for us Fri May 29 03:51:41 UTC 2020 I: Starting 1st build on remote node p64b-armhf-rb.debian.net. Fri May 29 03:51:41 UTC 2020 I: Preparing to do remote build '1' on p64b-armhf-rb.debian.net. Fri May 29 03:53:59 UTC 2020 I: Deleting $TMPDIR on p64b-armhf-rb.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Thu May 28 15:51:49 -12 2020 I: pbuilder-time-stamp: 1590724309 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/buster-reproducible-base.tgz] I: copying local configuration I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libtest-abortable-perl_0.002-1.dsc] I: copying [./libtest-abortable-perl_0.002.orig.tar.gz] I: copying [./libtest-abortable-perl_0.002-1.debian.tar.xz] I: Extracting source gpgv: unknown type of key resource 'trustedkeys.kbx' gpgv: keyblock resource '/root/.gnupg/trustedkeys.kbx': General error gpgv: Signature made Mon Feb 6 03:36:01 2017 -12 gpgv: using RSA key D1E1316E93A760A8104D85FABB3A68018649AA06 gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./libtest-abortable-perl_0.002-1.dsc dpkg-source: info: extracting libtest-abortable-perl in libtest-abortable-perl-0.002 dpkg-source: info: unpacking libtest-abortable-perl_0.002.orig.tar.gz dpkg-source: info: unpacking libtest-abortable-perl_0.002-1.debian.tar.xz I: using fakeroot in build. I: Installing the build-deps -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: armhf Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper (>= 9), libsub-exporter-perl, libtest-needs-perl, libtest-simple-perl (>= 1.302075), perl dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 18932 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper (>= 9); however: Package debhelper is not installed. pbuilder-satisfydepends-dummy depends on libsub-exporter-perl; however: Package libsub-exporter-perl is not installed. pbuilder-satisfydepends-dummy depends on libtest-needs-perl; however: Package libtest-needs-perl is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdmainutils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libbsd0{a} libcroco3{a} libdata-optlist-perl{a} libelf1{a} libfile-stripnondeterminism-perl{a} libglib2.0-0{a} libicu63{a} libmagic-mgc{a} libmagic1{a} libncurses6{a} libparams-util-perl{a} libpipeline1{a} libsigsegv2{a} libsub-exporter-perl{a} libsub-install-perl{a} libtest-needs-perl{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libglib2.0-data libgpm2 libltdl-dev libmail-sendmail-perl lynx shared-mime-info wget xdg-user-dirs 0 packages upgraded, 38 newly installed, 0 to remove and 0 not upgraded. Need to get 18.3 MB of archives. After unpacking 63.7 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian buster/main armhf libbsd0 armhf 0.9.1-2 [103 kB] Get: 2 http://deb.debian.org/debian buster/main armhf bsdmainutils armhf 11.1.2+b1 [186 kB] Get: 3 http://deb.debian.org/debian buster/main armhf libuchardet0 armhf 0.0.6-3 [62.2 kB] Get: 4 http://deb.debian.org/debian buster/main armhf groff-base armhf 1.22.4-3 [828 kB] Get: 5 http://deb.debian.org/debian buster/main armhf libpipeline1 armhf 1.5.1-2 [26.8 kB] Get: 6 http://deb.debian.org/debian buster/main armhf man-db armhf 2.8.5-2 [1240 kB] Get: 7 http://deb.debian.org/debian buster/main armhf sensible-utils all 0.0.12 [15.8 kB] Get: 8 http://deb.debian.org/debian buster/main armhf libmagic-mgc armhf 1:5.35-4+deb10u1 [242 kB] Get: 9 http://deb.debian.org/debian buster/main armhf libmagic1 armhf 1:5.35-4+deb10u1 [110 kB] Get: 10 http://deb.debian.org/debian buster/main armhf file armhf 1:5.35-4+deb10u1 [65.5 kB] Get: 11 http://deb.debian.org/debian buster/main armhf gettext-base armhf 0.19.8.1-9 [118 kB] Get: 12 http://deb.debian.org/debian buster/main armhf libsigsegv2 armhf 2.12-2 [32.1 kB] Get: 13 http://deb.debian.org/debian buster/main armhf m4 armhf 1.4.18-2 [190 kB] Get: 14 http://deb.debian.org/debian buster/main armhf autoconf all 2.69-11 [341 kB] Get: 15 http://deb.debian.org/debian buster/main armhf autotools-dev all 20180224.1 [77.0 kB] Get: 16 http://deb.debian.org/debian buster/main armhf automake all 1:1.16.1-4 [771 kB] Get: 17 http://deb.debian.org/debian buster/main armhf autopoint all 0.19.8.1-9 [434 kB] Get: 18 http://deb.debian.org/debian buster/main armhf libtool all 2.4.6-9 [547 kB] Get: 19 http://deb.debian.org/debian buster/main armhf dh-autoreconf all 19 [16.9 kB] Get: 20 http://deb.debian.org/debian buster/main armhf libarchive-zip-perl all 1.64-1 [96.8 kB] Get: 21 http://deb.debian.org/debian buster/main armhf libfile-stripnondeterminism-perl all 1.1.2-1 [19.8 kB] Get: 22 http://deb.debian.org/debian buster/main armhf dh-strip-nondeterminism all 1.1.2-1 [13.0 kB] Get: 23 http://deb.debian.org/debian buster/main armhf libelf1 armhf 0.176-1.1 [158 kB] Get: 24 http://deb.debian.org/debian buster/main armhf dwz armhf 0.12-3 [72.0 kB] Get: 25 http://deb.debian.org/debian buster/main armhf libglib2.0-0 armhf 2.58.3-2+deb10u2 [1101 kB] Get: 26 http://deb.debian.org/debian buster/main armhf libicu63 armhf 63.1-6+deb10u1 [8005 kB] Get: 27 http://deb.debian.org/debian buster/main armhf libxml2 armhf 2.9.4+dfsg1-7+b3 [595 kB] Get: 28 http://deb.debian.org/debian buster/main armhf libcroco3 armhf 0.6.12-3 [133 kB] Get: 29 http://deb.debian.org/debian buster/main armhf libncurses6 armhf 6.1+20181013-2+deb10u2 [79.8 kB] Get: 30 http://deb.debian.org/debian buster/main armhf gettext armhf 0.19.8.1-9 [1242 kB] Get: 31 http://deb.debian.org/debian buster/main armhf intltool-debian all 0.35.0+20060710.5 [26.8 kB] Get: 32 http://deb.debian.org/debian buster/main armhf po-debconf all 1.0.21 [248 kB] Get: 33 http://deb.debian.org/debian buster/main armhf debhelper all 12.1.1 [1016 kB] Get: 34 http://deb.debian.org/debian buster/main armhf libparams-util-perl armhf 1.07-3+b4 [21.8 kB] Get: 35 http://deb.debian.org/debian buster/main armhf libsub-install-perl all 0.928-1 [11.4 kB] Get: 36 http://deb.debian.org/debian buster/main armhf libdata-optlist-perl all 0.110-1 [10.6 kB] Get: 37 http://deb.debian.org/debian buster/main armhf libsub-exporter-perl all 0.987-1 [47.2 kB] Get: 38 http://deb.debian.org/debian buster/main armhf libtest-needs-perl all 0.002005-1 [8092 B] Fetched 18.3 MB in 2s (8028 kB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package libbsd0:armhf. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 18932 files and directories currently installed.) Preparing to unpack .../00-libbsd0_0.9.1-2_armhf.deb ... Unpacking libbsd0:armhf (0.9.1-2) ... Selecting previously unselected package bsdmainutils. Preparing to unpack .../01-bsdmainutils_11.1.2+b1_armhf.deb ... Unpacking bsdmainutils (11.1.2+b1) ... Selecting previously unselected package libuchardet0:armhf. Preparing to unpack .../02-libuchardet0_0.0.6-3_armhf.deb ... Unpacking libuchardet0:armhf (0.0.6-3) ... Selecting previously unselected package groff-base. Preparing to unpack .../03-groff-base_1.22.4-3_armhf.deb ... Unpacking groff-base (1.22.4-3) ... Selecting previously unselected package libpipeline1:armhf. Preparing to unpack .../04-libpipeline1_1.5.1-2_armhf.deb ... Unpacking libpipeline1:armhf (1.5.1-2) ... Selecting previously unselected package man-db. Preparing to unpack .../05-man-db_2.8.5-2_armhf.deb ... Unpacking man-db (2.8.5-2) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../06-sensible-utils_0.0.12_all.deb ... Unpacking sensible-utils (0.0.12) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../07-libmagic-mgc_1%3a5.35-4+deb10u1_armhf.deb ... Unpacking libmagic-mgc (1:5.35-4+deb10u1) ... Selecting previously unselected package libmagic1:armhf. Preparing to unpack .../08-libmagic1_1%3a5.35-4+deb10u1_armhf.deb ... Unpacking libmagic1:armhf (1:5.35-4+deb10u1) ... Selecting previously unselected package file. Preparing to unpack .../09-file_1%3a5.35-4+deb10u1_armhf.deb ... Unpacking file (1:5.35-4+deb10u1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../10-gettext-base_0.19.8.1-9_armhf.deb ... Unpacking gettext-base (0.19.8.1-9) ... Selecting previously unselected package libsigsegv2:armhf. Preparing to unpack .../11-libsigsegv2_2.12-2_armhf.deb ... Unpacking libsigsegv2:armhf (2.12-2) ... Selecting previously unselected package m4. Preparing to unpack .../12-m4_1.4.18-2_armhf.deb ... Unpacking m4 (1.4.18-2) ... Selecting previously unselected package autoconf. Preparing to unpack .../13-autoconf_2.69-11_all.deb ... Unpacking autoconf (2.69-11) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../14-autotools-dev_20180224.1_all.deb ... Unpacking autotools-dev (20180224.1) ... Selecting previously unselected package automake. Preparing to unpack .../15-automake_1%3a1.16.1-4_all.deb ... Unpacking automake (1:1.16.1-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../16-autopoint_0.19.8.1-9_all.deb ... Unpacking autopoint (0.19.8.1-9) ... Selecting previously unselected package libtool. Preparing to unpack .../17-libtool_2.4.6-9_all.deb ... Unpacking libtool (2.4.6-9) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../18-dh-autoreconf_19_all.deb ... Unpacking dh-autoreconf (19) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../19-libarchive-zip-perl_1.64-1_all.deb ... Unpacking libarchive-zip-perl (1.64-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../20-libfile-stripnondeterminism-perl_1.1.2-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.1.2-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../21-dh-strip-nondeterminism_1.1.2-1_all.deb ... Unpacking dh-strip-nondeterminism (1.1.2-1) ... Selecting previously unselected package libelf1:armhf. Preparing to unpack .../22-libelf1_0.176-1.1_armhf.deb ... Unpacking libelf1:armhf (0.176-1.1) ... Selecting previously unselected package dwz. Preparing to unpack .../23-dwz_0.12-3_armhf.deb ... Unpacking dwz (0.12-3) ... Selecting previously unselected package libglib2.0-0:armhf. Preparing to unpack .../24-libglib2.0-0_2.58.3-2+deb10u2_armhf.deb ... Unpacking libglib2.0-0:armhf (2.58.3-2+deb10u2) ... Selecting previously unselected package libicu63:armhf. Preparing to unpack .../25-libicu63_63.1-6+deb10u1_armhf.deb ... Unpacking libicu63:armhf (63.1-6+deb10u1) ... Selecting previously unselected package libxml2:armhf. Preparing to unpack .../26-libxml2_2.9.4+dfsg1-7+b3_armhf.deb ... Unpacking libxml2:armhf (2.9.4+dfsg1-7+b3) ... Selecting previously unselected package libcroco3:armhf. Preparing to unpack .../27-libcroco3_0.6.12-3_armhf.deb ... Unpacking libcroco3:armhf (0.6.12-3) ... Selecting previously unselected package libncurses6:armhf. Preparing to unpack .../28-libncurses6_6.1+20181013-2+deb10u2_armhf.deb ... Unpacking libncurses6:armhf (6.1+20181013-2+deb10u2) ... Selecting previously unselected package gettext. Preparing to unpack .../29-gettext_0.19.8.1-9_armhf.deb ... Unpacking gettext (0.19.8.1-9) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../30-intltool-debian_0.35.0+20060710.5_all.deb ... Unpacking intltool-debian (0.35.0+20060710.5) ... Selecting previously unselected package po-debconf. Preparing to unpack .../31-po-debconf_1.0.21_all.deb ... Unpacking po-debconf (1.0.21) ... Selecting previously unselected package debhelper. Preparing to unpack .../32-debhelper_12.1.1_all.deb ... Unpacking debhelper (12.1.1) ... Selecting previously unselected package libparams-util-perl. Preparing to unpack .../33-libparams-util-perl_1.07-3+b4_armhf.deb ... Unpacking libparams-util-perl (1.07-3+b4) ... Selecting previously unselected package libsub-install-perl. Preparing to unpack .../34-libsub-install-perl_0.928-1_all.deb ... Unpacking libsub-install-perl (0.928-1) ... Selecting previously unselected package libdata-optlist-perl. Preparing to unpack .../35-libdata-optlist-perl_0.110-1_all.deb ... Unpacking libdata-optlist-perl (0.110-1) ... Selecting previously unselected package libsub-exporter-perl. Preparing to unpack .../36-libsub-exporter-perl_0.987-1_all.deb ... Unpacking libsub-exporter-perl (0.987-1) ... Selecting previously unselected package libtest-needs-perl. Preparing to unpack .../37-libtest-needs-perl_0.002005-1_all.deb ... Unpacking libtest-needs-perl (0.002005-1) ... Setting up libpipeline1:armhf (1.5.1-2) ... Setting up libmagic-mgc (1:5.35-4+deb10u1) ... Setting up libarchive-zip-perl (1.64-1) ... Setting up libglib2.0-0:armhf (2.58.3-2+deb10u2) ... No schema files found: doing nothing. Setting up libmagic1:armhf (1:5.35-4+deb10u1) ... Setting up gettext-base (0.19.8.1-9) ... Setting up file (1:5.35-4+deb10u1) ... Setting up libicu63:armhf (63.1-6+deb10u1) ... Setting up libsub-install-perl (0.928-1) ... Setting up libtest-needs-perl (0.002005-1) ... Setting up autotools-dev (20180224.1) ... Setting up libncurses6:armhf (6.1+20181013-2+deb10u2) ... Setting up libsigsegv2:armhf (2.12-2) ... Setting up autopoint (0.19.8.1-9) ... Setting up libparams-util-perl (1.07-3+b4) ... Setting up sensible-utils (0.0.12) ... Setting up libuchardet0:armhf (0.0.6-3) ... Setting up libbsd0:armhf (0.9.1-2) ... Setting up libelf1:armhf (0.176-1.1) ... Setting up libxml2:armhf (2.9.4+dfsg1-7+b3) ... Setting up libfile-stripnondeterminism-perl (1.1.2-1) ... Setting up libtool (2.4.6-9) ... Setting up m4 (1.4.18-2) ... Setting up bsdmainutils (11.1.2+b1) ... update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode Setting up libdata-optlist-perl (0.110-1) ... Setting up libcroco3:armhf (0.6.12-3) ... Setting up autoconf (2.69-11) ... Setting up dwz (0.12-3) ... Setting up groff-base (1.22.4-3) ... Setting up libsub-exporter-perl (0.987-1) ... Setting up automake (1:1.16.1-4) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up gettext (0.19.8.1-9) ... Setting up man-db (2.8.5-2) ... Not building database; man-db/auto-update is not 'true'. Setting up intltool-debian (0.35.0+20060710.5) ... Setting up po-debconf (1.0.21) ... Setting up debhelper (12.1.1) ... Setting up dh-autoreconf (19) ... Setting up dh-strip-nondeterminism (1.1.2-1) ... Processing triggers for libc-bin (2.28-10) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.23-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/libtest-abortable-perl-0.002/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b dpkg-buildpackage: info: source package libtest-abortable-perl dpkg-buildpackage: info: source version 0.002-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by gregor herrmann dpkg-source --before-build . dpkg-buildpackage: info: host architecture armhf fakeroot debian/rules clean dh clean dh_clean debian/rules build dh build dh_update_autotools_config dh_auto_configure perl -I. Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -ffile-prefix-map=/build/libtest-abortable-perl-0.002=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2" "LD=arm-linux-gnueabihf-gcc -g -O2 -ffile-prefix-map=/build/libtest-abortable-perl-0.002=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Test::Abortable Writing MYMETA.yml and MYMETA.json dh_auto_build make -j1 make[1]: Entering directory '/build/libtest-abortable-perl-0.002' cp lib/Test/Abortable.pm blib/lib/Test/Abortable.pm Manifying 1 pod document make[1]: Leaving directory '/build/libtest-abortable-perl-0.002' dh_auto_test make -j1 test TEST_VERBOSE=1 make[1]: Entering directory '/build/libtest-abortable-perl-0.002' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t # # Versions for all modules listed in MYMETA.json (including optional ones): # # === Configure Requires === # # Module Want Have # ------------------- ---- ---- # ExtUtils::MakeMaker any 7.34 # # === Build Requires === # # Module Want Have # ------------------- ---- ---- # ExtUtils::MakeMaker any 7.34 # # === Test Requires === # # Module Want Have # ------------------- ---- -------- # Data::Dumper any 2.170 # ExtUtils::MakeMaker any 7.34 # File::Spec any 3.74 # Test::More 0.96 1.302133 # Test::Needs any 0.002005 # overload any 1.30 # # === Test Recommends === # # Module Want Have # ---------- -------- -------- # CPAN::Meta 2.120900 2.150010 # # === Runtime Requires === # # Module Want Have # ------------- -------- -------- # Sub::Exporter any 0.987 # Test2::API 1.302075 1.302133 # strict any 1.11 # warnings any 1.42 # t/00-report-prereqs.t .. 1..1 ok 1 ok t/abort.t .............. ok 1 - we ran three subtests (the three test methods) # Subtest: first subtest ok 1 - it failed ok 2 - three pass/fail events ok 3 - first passed ok 4 - second passed ok 5 - third failed ok 6 - the final Ok test looks like our abort ok 7 - 'test_abort_object' isa 'Abort::Test' 1..7 ok 2 - first subtest # Subtest: second subtest ok 1 - it failed ok 2 - three pass/fail events ok 3 - first passed ok 4 - second passed ok 5 - third passed ok 6 - fourth failed ok 7 - fifth passed ok 8 - the abort Ok test looks like our abort ok 9 - 'test_abort_object' isa 'Abort::Test' 1..9 ok 3 - second subtest # Subtest: third subtest ok 1 - it passed ok 2 - two pass/fail events ok 3 - first passed ok 4 - second passed ok 5 - the final Ok test looks like our abort ok 6 - 'test_abort_object' isa 'Abort::Test' ok 7 - we have two diagnostics ok 8 - ...which we expected 1..8 ok 4 - third subtest # Subtest: fourth subtest ok 1 - it failed ok 2 - we get two events ok 3 - first passed 1..3 ok 5 - fourth subtest 1..5 ok t/failures.t ........... skipped: Need failures All tests successful. Files=3, Tests=6, 2 wallclock secs ( 0.14 usr 0.02 sys + 2.20 cusr 0.20 csys = 2.56 CPU) Result: PASS make[1]: Leaving directory '/build/libtest-abortable-perl-0.002' fakeroot debian/rules binary dh binary dh_testroot dh_prep dh_auto_install make -j1 install DESTDIR=/build/libtest-abortable-perl-0.002/debian/libtest-abortable-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/libtest-abortable-perl-0.002' Manifying 1 pod document Installing /build/libtest-abortable-perl-0.002/debian/libtest-abortable-perl/usr/share/perl5/Test/Abortable.pm Installing /build/libtest-abortable-perl-0.002/debian/libtest-abortable-perl/usr/share/man/man3/Test::Abortable.3pm make[1]: Leaving directory '/build/libtest-abortable-perl-0.002' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libtest-abortable-perl' in '../libtest-abortable-perl_0.002-1_all.deb'. dpkg-genbuildinfo --build=binary dpkg-genchanges --build=binary >../libtest-abortable-perl_0.002-1_armhf.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/1512 and its subdirectories I: Current time: Thu May 28 15:53:53 -12 2020 I: pbuilder-time-stamp: 1590724433 Fri May 29 03:54:01 UTC 2020 I: 1st build successful. Starting 2nd build on remote node ff2a-armhf-rb.debian.net. Fri May 29 03:54:01 UTC 2020 I: Preparing to do remote build '2' on ff2a-armhf-rb.debian.net. Fri May 29 03:55:10 UTC 2020 I: Deleting $TMPDIR on ff2a-armhf-rb.debian.net. Fri May 29 03:55:12 UTC 2020 I: libtest-abortable-perl_0.002-1_armhf.changes: Format: 1.8 Date: Mon, 06 Feb 2017 16:35:26 +0100 Source: libtest-abortable-perl Binary: libtest-abortable-perl Architecture: all Version: 0.002-1 Distribution: unstable Urgency: medium Maintainer: Debian Perl Group Changed-By: gregor herrmann Description: libtest-abortable-perl - module to handle subtest failures with exceptions Closes: 854393 Changes: libtest-abortable-perl (0.002-1) unstable; urgency=medium . * Initial release (closes: #854393). Checksums-Sha1: 0df496c702d1361365ffe52c72440969a21e9eed 8704 libtest-abortable-perl_0.002-1_all.deb beb917b7f27580ac509020417e0513e3082519f0 4459 libtest-abortable-perl_0.002-1_armhf.buildinfo Checksums-Sha256: 74f6b25bd1ec406d79f5a35e15888f000eab9ff8f96ee1e656e2ea868436c4eb 8704 libtest-abortable-perl_0.002-1_all.deb 67a7e7549f5815b3ef707fb5b4da86223a2b38a3fcbf2f377000889fdfe4823f 4459 libtest-abortable-perl_0.002-1_armhf.buildinfo Files: 0231b477bc268bc53f3cba058469c231 8704 perl optional libtest-abortable-perl_0.002-1_all.deb e8e688ef21f6c936acb929228f460361 4459 perl optional libtest-abortable-perl_0.002-1_armhf.buildinfo Fri May 29 03:55:15 UTC 2020 I: diffoscope 145 will be used to compare the two builds: # Profiling output for: /usr/bin/diffoscope --html /srv/reproducible-results/rbuild-debian/tmp.NQa6wzE50A/libtest-abortable-perl_0.002-1.diffoscope.html --text /srv/reproducible-results/rbuild-debian/tmp.NQa6wzE50A/libtest-abortable-perl_0.002-1.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/tmp.NQa6wzE50A/libtest-abortable-perl_0.002-1.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/tmp.NQa6wzE50A/b1/libtest-abortable-perl_0.002-1_armhf.changes /srv/reproducible-results/rbuild-debian/tmp.NQa6wzE50A/b2/libtest-abortable-perl_0.002-1_armhf.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.400s) 0.400s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.048s) 0.048s 10 calls diffoscope.comparators.binary.FilesystemFile Fri May 29 04:21:51 UTC 2020 I: diffoscope 145 found no differences in the changes files, and a .buildinfo file also exists. Fri May 29 04:21:51 UTC 2020 I: libtest-abortable-perl from buster built successfully and reproducibly on armhf. Fri May 29 04:21:53 UTC 2020 I: Submitting .buildinfo files to external archives: Fri May 29 04:21:53 UTC 2020 I: Submitting 8.0K b1/libtest-abortable-perl_0.002-1_armhf.buildinfo.asc Fri May 29 04:21:54 UTC 2020 I: Submitting 8.0K b2/libtest-abortable-perl_0.002-1_armhf.buildinfo.asc Fri May 29 04:21:55 UTC 2020 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Fri May 29 04:21:55 UTC 2020 I: Done submitting .buildinfo files. Fri May 29 04:21:55 UTC 2020 I: Removing signed libtest-abortable-perl_0.002-1_armhf.buildinfo.asc files: removed './b1/libtest-abortable-perl_0.002-1_armhf.buildinfo.asc' removed './b2/libtest-abortable-perl_0.002-1_armhf.buildinfo.asc'